diff options
| -rw-r--r-- | drivers/acpi/acpi_processor.c | 17 | ||||
| -rw-r--r-- | drivers/acpi/cppc_acpi.c | 237 | ||||
| -rw-r--r-- | drivers/acpi/processor_driver.c | 2 | ||||
| -rw-r--r-- | drivers/acpi/processor_idle.c | 62 | ||||
| -rw-r--r-- | drivers/acpi/sleep.c | 35 | ||||
| -rw-r--r-- | drivers/mailbox/pcc.c | 111 | ||||
| -rw-r--r-- | include/acpi/processor.h | 9 |
7 files changed, 359 insertions, 114 deletions
diff --git a/drivers/acpi/acpi_processor.c b/drivers/acpi/acpi_processor.c index 6979186dbd4b..b5e54f2da53d 100644 --- a/drivers/acpi/acpi_processor.c +++ b/drivers/acpi/acpi_processor.c @@ -514,7 +514,24 @@ static struct acpi_scan_handler processor_handler = { }, }; +static int acpi_processor_container_attach(struct acpi_device *dev, + const struct acpi_device_id *id) +{ + return 1; +} + +static const struct acpi_device_id processor_container_ids[] = { + { ACPI_PROCESSOR_CONTAINER_HID, }, + { } +}; + +static struct acpi_scan_handler processor_container_handler = { + .ids = processor_container_ids, + .attach = acpi_processor_container_attach, +}; + void __init acpi_processor_init(void) { acpi_scan_add_handler_with_hotplug(&processor_handler, "processor"); + acpi_scan_add_handler(&processor_container_handler); } diff --git a/drivers/acpi/cppc_acpi.c b/drivers/acpi/cppc_acpi.c index 6730f965b379..8adac69dba3d 100644 --- a/drivers/acpi/cppc_acpi.c +++ b/drivers/acpi/cppc_acpi.c @@ -39,6 +39,7 @@ #include <linux/cpufreq.h> #include <linux/delay.h> +#include <linux/ktime.h> #include <acpi/cppc_acpi.h> /* @@ -63,58 +64,140 @@ static struct mbox_chan *pcc_channel; static void __iomem *pcc_comm_addr; static u64 comm_base_addr; static int pcc_subspace_idx = -1; -static u16 pcc_cmd_delay; static bool pcc_channel_acquired; +static ktime_t deadline; +static unsigned int pcc_mpar, pcc_mrtt; + +/* pcc mapped address + header size + offset within PCC subspace */ +#define GET_PCC_VADDR(offs) (pcc_comm_addr + 0x8 + (offs)) /* * Arbitrary Retries in case the remote processor is slow to respond - * to PCC commands. + * to PCC commands. Keeping it high enough to cover emulators where + * the processors run painfully slow. */ #define NUM_RETRIES 500 +static int check_pcc_chan(void) +{ + int ret = -EIO; + struct acpi_pcct_shared_memory __iomem *generic_comm_base = pcc_comm_addr; + ktime_t next_deadline = ktime_add(ktime_get(), deadline); + + /* Retry in case the remote processor was too slow to catch up. */ + while (!ktime_after(ktime_get(), next_deadline)) { + /* + * Per spec, prior to boot the PCC space wil be initialized by + * platform and should have set the command completion bit when + * PCC can be used by OSPM + */ + if (readw_relaxed(&generic_comm_base->status) & PCC_CMD_COMPLETE) { + ret = 0; + break; + } + /* + * Reducing the bus traffic in case this loop takes longer than + * a few retries. + */ + udelay(3); + } + + return ret; +} + static int send_pcc_cmd(u16 cmd) { - int retries, result = -EIO; - struct acpi_pcct_hw_reduced *pcct_ss = pcc_channel->con_priv; + int ret = -EIO; struct acpi_pcct_shared_memory *generic_comm_base = (struct acpi_pcct_shared_memory *) pcc_comm_addr; - u32 cmd_latency = pcct_ss->latency; + static ktime_t last_cmd_cmpl_time, last_mpar_reset; + static int mpar_count; + unsigned int time_delta; - /* Min time OS should wait before sending next command. */ - udelay(pcc_cmd_delay); + /* + * For CMD_WRITE we know for a fact the caller should have checked + * the channel before writing to PCC space + */ + if (cmd == CMD_READ) { + ret = check_pcc_chan(); + if (ret) + return ret; + } + + /* + * Handle the Minimum Request Turnaround Time(MRTT) + * "The minimum amount of time that OSPM must wait after the completion + * of a command before issuing the next command, in microseconds" + */ + if (pcc_mrtt) { + time_delta = ktime_us_delta(ktime_get(), last_cmd_cmpl_time); + if (pcc_mrtt > time_delta) + udelay(pcc_mrtt - time_delta); + } + + /* + * Handle the non-zero Maximum Periodic Access Rate(MPAR) + * "The maximum number of periodic requests that the subspace channel can + * support, reported in commands per minute. 0 indicates no limitation." + * + * This parameter should be ideally zero or large enough so that it can + * handle maximum number of requests that all the cores in the system can + * collectively generate. If it is not, we will follow the spec and just + * not send the request to the platform after hitting the MPAR limit in + * any 60s window + */ + if (pcc_mpar) { + if (mpar_count == 0) { + time_delta = ktime_ms_delta(ktime_get(), last_mpar_reset); + if (time_delta < 60 * MSEC_PER_SEC) { + pr_debug("PCC cmd not sent due to MPAR limit"); + return -EIO; + } + last_mpar_reset = ktime_get(); + mpar_count = pcc_mpar; + } + mpar_count--; + } /* Write to the shared comm region. */ - writew(cmd, &generic_comm_base->command); + writew_relaxed(cmd, &generic_comm_base->command); /* Flip CMD COMPLETE bit */ - writew(0, &generic_comm_base->status); + writew_relaxed(0, &generic_comm_base->status); /* Ring doorbell */ - result = mbox_send_message(pcc_channel, &cmd); - if (result < 0) { + ret = mbox_send_message(pcc_channel, &cmd); + if (ret < 0) { pr_err("Err sending PCC mbox message. cmd:%d, ret:%d\n", - cmd, result); - return result; + cmd, ret); + return ret; } - /* Wait for a nominal time to let platform process command. */ - udelay(cmd_latency); - - /* Retry in case the remote processor was too slow to catch up. */ - for (retries = NUM_RETRIES; retries > 0; retries--) { - if (readw_relaxed(&generic_comm_base->status) & PCC_CMD_COMPLETE) { - result = 0; - break; - } + /* + * For READs we need to ensure the cmd completed to ensure + * the ensuing read()s can proceed. For WRITEs we dont care + * because the actual write()s are done before coming here + * and the next READ or WRITE will check if the channel + * is busy/free at the entry of this call. + * + * If Minimum Request Turnaround Time is non-zero, we need + * to record the completion time of both READ and WRITE + * command for proper handling of MRTT, so we need to check + * for pcc_mrtt in addition to CMD_READ + */ + if (cmd == CMD_READ || pcc_mrtt) { + ret = check_pcc_chan(); + if (pcc_mrtt) + last_cmd_cmpl_time = ktime_get(); } - mbox_client_txdone(pcc_channel, result); - return result; + mbox_client_txdone(pcc_channel, ret); + return ret; } static void cppc_chan_tx_done(struct mbox_client *cl, void *msg, int ret) { - if (ret) + if (ret < 0) pr_debug("TX did not complete: CMD sent:%x, ret:%d\n", *(u16 *)msg, ret); else @@ -306,6 +389,7 @@ static int register_pcc_channel(int pcc_subspace_idx) { struct acpi_pcct_hw_reduced *cppc_ss; unsigned int len; + u64 usecs_lat; if (pcc_subspace_idx >= 0) { pcc_channel = pcc_mbox_request_channel(&cppc_mbox_cl, @@ -335,7 +419,16 @@ static int register_pcc_channel(int pcc_subspace_idx) */ comm_base_addr = cppc_ss->base_address; len = cppc_ss->length; - pcc_cmd_delay = cppc_ss->min_turnaround_time; + + /* + * cppc_ss->latency is just a Nominal value. In reality + * the remote processor could be much slower to reply. + * So add an arbitrary amount of wait on top of Nominal. + */ + usecs_lat = NUM_RETRIES * cppc_ss->latency; + deadline = ns_to_ktime(usecs_lat * NSEC_PER_USEC); + pcc_mrtt = cppc_ss->min_turnaround_time; + pcc_mpar = cppc_ss->max_access_rate; pcc_comm_addr = acpi_os_ioremap(comm_base_addr, len); if (!pcc_comm_addr) { @@ -546,29 +639,74 @@ void acpi_cppc_processor_exit(struct acpi_processor *pr) } EXPORT_SYMBOL_GPL(acpi_cppc_processor_exit); -static u64 get_phys_addr(struct cpc_reg *reg) -{ - /* PCC communication addr space begins at byte offset 0x8. */ - if (reg->space_id == ACPI_ADR_SPACE_PLATFORM_COMM) - return (u64)comm_base_addr + 0x8 + reg->address; - else - return reg->address; -} +/* + * Since cpc_read and cpc_write are called while holding pcc_lock, it should be + * as fast as possible. We have already mapped the PCC subspace during init, so + * we can directly write to it. + */ -static void cpc_read(struct cpc_reg *reg, u64 *val) +static int cpc_read(struct cpc_reg *reg, u64 *val) { - u64 addr = get_phys_addr(reg); + int ret_val = 0; - acpi_os_read_memory((acpi_physical_address)addr, - val, reg->bit_width); + *val = 0; + if (reg->space_id == ACPI_ADR_SPACE_PLATFORM_COMM) { + void __iomem *vaddr = GET_PCC_VADDR(reg->address); + + switch (reg->bit_width) { + case 8: + *val = readb_relaxed(vaddr); + break; + case 16: + *val = readw_relaxed(vaddr); + break; + case 32: + *val = readl_relaxed(vaddr); + break; + case 64: + *val = readq_relaxed(vaddr); + break; + default: + pr_debug("Error: Cannot read %u bit width from PCC\n", + reg->bit_width); + ret_val = -EFAULT; + } + } else + ret_val = acpi_os_read_memory((acpi_physical_address)reg->address, + val, reg->bit_width); + return ret_val; } -static void cpc_write(struct cpc_reg *reg, u64 val) +static int cpc_write(struct cpc_reg *reg, u64 val) { - u64 addr = get_phys_addr(reg); + int ret_val = 0; - acpi_os_write_memory((acpi_physical_address)addr, - val, reg->bit_width); + if (reg->space_id == ACPI_ADR_SPACE_PLATFORM_COMM) { + void __iomem *vaddr = GET_PCC_VADDR(reg->address); + + switch (reg->bit_width) { + case 8: + writeb_relaxed(val, vaddr); + break; + case 16: + writew_relaxed(val, vaddr); + break; + case 32: + writel_relaxed(val, vaddr); + break; + case 64: + writeq_relaxed(val, vaddr); + break; + default: + pr_debug("Error: Cannot write %u bit width to PCC\n", + reg->bit_width); + ret_val = -EFAULT; + break; + } + } else + ret_val = acpi_os_write_memory((acpi_physical_address)reg->address, + val, reg->bit_width); + return ret_val; } /** @@ -604,7 +742,7 @@ int cppc_get_perf_caps(int cpunum, struct cppc_perf_caps *perf_caps) (ref_perf->cpc_entry.reg.space_id == ACPI_ADR_SPACE_PLATFORM_COMM) || (nom_perf->cpc_entry.reg.space_id == ACPI_ADR_SPACE_PLATFORM_COMM)) { /* Ring doorbell once to update PCC subspace */ - if (send_pcc_cmd(CMD_READ)) { + if (send_pcc_cmd(CMD_READ) < 0) { ret = -EIO; goto out_err; } @@ -662,7 +800,7 @@ int cppc_get_perf_ctrs(int cpunum, struct cppc_perf_fb_ctrs *perf_fb_ctrs) if ((delivered_reg->cpc_entry.reg.space_id == ACPI_ADR_SPACE_PLATFORM_COMM) || (reference_reg->cpc_entry.reg.space_id == ACPI_ADR_SPACE_PLATFORM_COMM)) { /* Ring doorbell once to update PCC subspace */ - if (send_pcc_cmd(CMD_READ)) { + if (send_pcc_cmd(CMD_READ) < 0) { ret = -EIO; goto out_err; } @@ -713,6 +851,13 @@ int cppc_set_perf(int cpu, struct cppc_perf_ctrls *perf_ctrls) spin_lock(&pcc_lock); + /* If this is PCC reg, check if channel is free before writing */ + if (desired_reg->cpc_entry.reg.space_id == ACPI_ADR_SPACE_PLATFORM_COMM) { + ret = check_pcc_chan(); + if (ret) + goto busy_channel; + } + /* * Skip writing MIN/MAX until Linux knows how to come up with * useful values. @@ -722,10 +867,10 @@ int cppc_set_perf(int cpu, struct cppc_perf_ctrls *perf_ctrls) /* Is this a PCC reg ?*/ if (desired_reg->cpc_entry.reg.space_id == ACPI_ADR_SPACE_PLATFORM_COMM) { /* Ring doorbell so Remote can get our perf request. */ - if (send_pcc_cmd(CMD_WRITE)) + if (send_pcc_cmd(CMD_WRITE) < 0) ret = -EIO; } - +busy_channel: spin_unlock(&pcc_lock); return ret; diff --git a/drivers/acpi/processor_driver.c b/drivers/acpi/processor_driver.c index 11154a330f07..d2fa8cb82d2b 100644 --- a/drivers/acpi/processor_driver.c +++ b/drivers/acpi/processor_driver.c @@ -314,7 +314,6 @@ static int __init acpi_processor_driver_init(void) if (result < 0) return result; - acpi_processor_syscore_init(); register_hotcpu_notifier(&acpi_cpu_notifier); acpi_thermal_cpufreq_init(); acpi_processor_ppc_init(); @@ -330,7 +329,6 @@ static void __exit acpi_processor_driver_exit(void) acpi_processor_ppc_exit(); acpi_thermal_cpufreq_exit(); unregister_hotcpu_notifier(&acpi_cpu_notifier); - acpi_processor_syscore_exit(); driver_unregister(&acpi_processor_driver); } diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c index 175c86bee3a9..fadce354d2b7 100644 --- a/drivers/acpi/processor_idle.c +++ b/drivers/acpi/processor_idle.c @@ -23,6 +23,7 @@ * * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ */ +#define pr_fmt(fmt) "ACPI: " fmt #include <linux/module.h> #include <linux/acpi.h> @@ -30,7 +31,6 @@ #include <linux/sched.h> /* need_resched() */ #include <linux/tick.h> #include <linux/cpuidle.h> -#include <linux/syscore_ops.h> #include <acpi/processor.h> /* @@ -43,8 +43,6 @@ #include <asm/apic.h> #endif -#define PREFIX "ACPI: " - #define ACPI_PROCESSOR_CLASS "processor" #define _COMPONENT ACPI_PROCESSOR_COMPONENT ACPI_MODULE_NAME("processor_idle"); @@ -81,9 +79,9 @@ static int set_max_cstate(const struct dmi_system_id *id) if (max_cstate > ACPI_PROCESSOR_MAX_POWER) return 0; - printk(KERN_NOTICE PREFIX "%s detected - limiting to C%ld max_cstate." - " Override with \"processor.max_cstate=%d\"\n", id->ident, - (long)id->driver_data, ACPI_PROCESSOR_MAX_POWER + 1); + pr_notice("%s detected - limiting to C%ld max_cstate." + " Override with \"processor.max_cstate=%d\"\n", id->ident, + (long)id->driver_data, ACPI_PROCESSOR_MAX_POWER + 1); max_cstate = (long)id->driver_data; @@ -194,42 +192,6 @@ static void lapic_timer_state_broadcast(struct acpi_processor *pr, #endif -#ifdef CONFIG_PM_SLEEP -static u32 saved_bm_rld; - -static int acpi_processor_suspend(void) -{ - acpi_read_bit_register(ACPI_BITREG_BUS_MASTER_RLD, &saved_bm_rld); - return 0; -} - -static void acpi_processor_resume(void) -{ - u32 resumed_bm_rld = 0; - - acpi_read_bit_register(ACPI_BITREG_BUS_MASTER_RLD, &resumed_bm_rld); - if (resumed_bm_rld == saved_bm_rld) - return; - - acpi_write_bit_register(ACPI_BITREG_BUS_MASTER_RLD, saved_bm_rld); -} - -static struct syscore_ops acpi_processor_syscore_ops = { - .suspend = acpi_processor_suspend, - .resume = acpi_processor_resume, -}; - -void acpi_processor_syscore_init(void) -{ - register_syscore_ops(&acpi_processor_syscore_ops); -} - -void acpi_processor_syscore_exit(void) -{ - unregister_syscore_ops(&acpi_processor_syscore_ops); -} -#endif /* CONFIG_PM_SLEEP */ - #if defined(CONFIG_X86) static void tsc_check_state(int state) { @@ -351,7 +313,7 @@ static int acpi_processor_get_power_info_cst(struct acpi_processor *pr) /* There must be at least 2 elements */ if (!cst || (cst->type != ACPI_TYPE_PACKAGE) || cst->package.count < 2) { - printk(KERN_ERR PREFIX "not enough elements in _CST\n"); + pr_err("not enough elements in _CST\n"); ret = -EFAULT; goto end; } @@ -360,7 +322,7 @@ static int acpi_processor_get_power_info_cst(struct acpi_processor *pr) /* Validate number of power states. */ if (count < 1 || count != cst->package.count - 1) { - printk(KERN_ERR PREFIX "count given by _CST is not valid\n"); + pr_err("count given by _CST is not valid\n"); ret = -EFAULT; goto end; } @@ -469,11 +431,9 @@ static int acpi_processor_get_power_info_cst(struct acpi_processor *pr) * (From 1 through ACPI_PROCESSOR_MAX_POWER - 1) */ if (current_count >= (ACPI_PROCESSOR_MAX_POWER - 1)) { - printk(KERN_WARNING - "Limiting number of power states to max (%d)\n", - ACPI_PROCESSOR_MAX_POWER); - printk(KERN_WARNING - "Please increase ACPI_PROCESSOR_MAX_POWER if needed.\n"); + pr_warn("Limiting number of power states to max (%d)\n", + ACPI_PROCESSOR_MAX_POWER); + pr_warn("Please increase ACPI_PROCESSOR_MAX_POWER if needed.\n"); break; } } @@ -1097,8 +1057,8 @@ int acpi_processor_power_init(struct acpi_processor *pr) retval = cpuidle_register_driver(&acpi_idle_driver); if (retval) return retval; - printk(KERN_DEBUG "ACPI: %s registered with cpuidle\n", - acpi_idle_driver.name); + pr_debug("%s registered with cpuidle\n", + acpi_idle_driver.name); } dev = kzalloc(sizeof(*dev), GFP_KERNEL); diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c index 9cb975200cac..fbfcce3b5227 100644 --- a/drivers/acpi/sleep.c +++ b/drivers/acpi/sleep.c @@ -19,6 +19,7 @@ #include <linux/reboot.h> #include <linux/acpi.h> #include <linux/module.h> +#include <linux/syscore_ops.h> #include <asm/io.h> #include <trace/events/power.h> @@ -677,6 +678,39 @@ static void acpi_sleep_suspend_setup(void) static inline void acpi_sleep_suspend_setup(void) {} #endif /* !CONFIG_SUSPEND */ +#ifdef CONFIG_PM_SLEEP +static u32 saved_bm_rld; + +static int acpi_save_bm_rld(void) +{ + acpi_read_bit_register(ACPI_BITREG_BUS_MASTER_RLD, &saved_bm_rld); + return 0; +} + +static void acpi_restore_bm_rld(void) +{ + u32 resumed_bm_rld = 0; + + acpi_read_bit_register(ACPI_BITREG_BUS_MASTER_RLD, &resumed_bm_rld); + if (resumed_bm_rld == saved_bm_rld) + return; + + acpi_write_bit_register(ACPI_BITREG_BUS_MASTER_RLD, saved_bm_rld); +} + +static struct syscore_ops acpi_sleep_syscore_ops = { + .suspend = acpi_save_bm_rld, + .resume = acpi_restore_bm_rld, +}; + +void acpi_sleep_syscore_init(void) +{ + register_syscore_ops(&acpi_sleep_syscore_ops); +} +#else +static inline void acpi_sleep_syscore_init(void) {} +#endif /* CONFIG_PM_SLEEP */ + #ifdef CONFIG_HIBERNATION static unsigned long s4_hardware_signature; static struct acpi_table_facs *facs; @@ -839,6 +873,7 @@ int __init acpi_sleep_init(void) sleep_states[ACPI_STATE_S0] = 1; + acpi_sleep_syscore_init(); acpi_sleep_suspend_setup(); acpi_sleep_hibernate_setup(); diff --git a/drivers/mailbox/pcc.c b/drivers/mailbox/pcc.c index 8f779a1ec99c..0ddf638d60f3 100644 --- a/drivers/mailbox/pcc.c +++ b/drivers/mailbox/pcc.c @@ -63,6 +63,7 @@ #include <linux/platform_device.h> #include <linux/mailbox_controller.h> #include <linux/mailbox_client.h> +#include <linux/io-64-nonatomic-lo-hi.h> #include "mailbox.h" @@ -70,6 +71,9 @@ static struct mbox_chan *pcc_mbox_channels; +/* Array of cached virtual address for doorbell registers */ +static void __iomem **pcc_doorbell_vaddr; + static struct mbox_controller pcc_mbox_ctrl = {}; /** * get_pcc_channel - Given a PCC subspace idx, get @@ -160,6 +164,66 @@ void pcc_mbox_free_channel(struct mbox_chan *chan) } EXPORT_SYMBOL_GPL(pcc_mbox_free_channel); +/* + * PCC can be used with perf critical drivers such as CPPC + * So it makes sense to locally cache the virtual address and + * use it to read/write to PCC registers such as doorbell register + * + * The below read_register and write_registers are used to read and + * write from perf critical registers such as PCC doorbell register + */ +static int read_register(void __iomem *vaddr, u64 *val, unsigned int bit_width) +{ + int ret_val = 0; + + switch (bit_width) { + case 8: + *val = readb(vaddr); + break; + case 16: + *val = readw(vaddr); + break; + case 32: + *val = readl(vaddr); + break; + case 64: + *val = readq(vaddr); + break; + default: + pr_debug("Error: Cannot read register of %u bit width", + bit_width); + ret_val = -EFAULT; + break; + } + return ret_val; +} + +static int write_register(void __iomem *vaddr, u64 val, unsigned int bit_width) +{ + int ret_val = 0; + + switch (bit_width) { + case 8: + writeb(val, vaddr); + break; + case 16: + writew(val, vaddr); + break; + case 32: + writel(val, vaddr); + break; + case 64: + writeq(val, vaddr); + break; + default: + pr_debug("Error: Cannot write register of %u bit width", + bit_width); + ret_val = -EFAULT; + break; + } + return ret_val; +} + /** * pcc_send_data - Called from Mailbox Controller code. Used * here only to ring the channel doorbell. The PCC client @@ -175,21 +239,39 @@ EXPORT_SYMBOL_GPL(pcc_mbox_free_channel); static int pcc_send_data(struct mbox_chan *chan, void *data) { struct acpi_pcct_hw_reduced *pcct_ss = chan->con_priv; - struct acpi_generic_address doorbell; + struct acpi_generic_address *doorbell; u64 doorbell_preserve; u64 doorbell_val; u64 doorbell_write; + u32 id = chan - pcc_mbox_channels; + int ret = 0; + + if (id >= pcc_mbox_ctrl.num_chans) { + pr_debug("pcc_send_data: Invalid mbox_chan passed\n"); + return -ENOENT; + } - doorbell = pcct_ss->doorbell_register; + doorbell = &pcct_ss->doorbell_register; doorbell_preserve = pcct_ss->preserve_mask; doorbell_write = pcct_ss->write_mask; /* Sync notification from OS to Platform. */ - acpi_read(&doorbell_val, &doorbell); - acpi_write((doorbell_val & doorbell_preserve) | doorbell_write, - &doorbell); - - return 0; + if (pcc_doorbell_vaddr[id]) { + ret = read_register(pcc_doorbell_vaddr[id], &doorbell_val, + doorbell->bit_width); + if (ret) + return ret; + ret = write_register(pcc_doorbell_vaddr[id], + (doorbell_val & doorbell_preserve) | doorbell_write, + doorbell->bit_width); + } else { + ret = acpi_read(&doorbell_val, doorbell); + if (ret) + return ret; + ret = acpi_write((doorbell_val & doorbell_preserve) | doorbell_write, + doorbell); + } + return ret; } static const struct mbox_chan_ops pcc_chan_ops = { @@ -265,14 +347,29 @@ static int __init acpi_pcc_probe(void) return -ENOMEM; } + pcc_doorbell_vaddr = kcalloc(count, sizeof(void *), GFP_KERNEL); + if (!pcc_doorbell_vaddr) { + kfree(pcc_mbox_channels); + return -ENOMEM; + } + /* Point to the first PCC subspace entry */ pcct_entry = (struct acpi_subtable_header *) ( (unsigned long) pcct_tbl + sizeof(struct acpi_table_pcct)); for (i = 0; i < count; i++) { + struct acpi_generic_address *db_reg; + struct acpi_pcct_hw_reduced *pcct_ss; pcc_mbox_channels[i].con_priv = pcct_entry; pcct_entry = (struct acpi_subtable_header *) ((unsigned long) pcct_entry + pcct_entry->length); + + /* If doorbell is in system memory cache the virt address */ + pcct_ss = (struct acpi_pcct_hw_reduced *)pcct_entry; + db_reg = &pcct_ss->doorbell_register; + if (db_reg->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) + pcc_doorbell_vaddr[i] = acpi_os_ioremap(db_reg->address, + db_reg->bit_width/8); } pcc_mbox_ctrl.num_chans = count; diff --git a/include/acpi/processor.h b/include/acpi/processor.h index 07fb100bcc68..6f1805dd5d3c 100644 --- a/include/acpi/processor.h +++ b/include/acpi/processor.h @@ -9,6 +9,7 @@ #define ACPI_PROCESSOR_CLASS "processor" #define ACPI_PROCESSOR_DEVICE_NAME "Processor" #define ACPI_PROCESSOR_DEVICE_HID "ACPI0007" +#define ACPI_PROCESSOR_CONTAINER_HID "ACPI0010" #define ACPI_PROCESSOR_BUSY_METRIC 10 @@ -394,14 +395,6 @@ static inline int acpi_processor_hotplug(struct acpi_processor *pr) } #endif /* CONFIG_ACPI_PROCESSOR_IDLE */ -#if defined(CONFIG_PM_SLEEP) & defined(CONFIG_ACPI_PROCESSOR_IDLE) -void acpi_processor_syscore_init(void); -void acpi_processor_syscore_exit(void); -#else -static inline void acpi_processor_syscore_init(void) {} -static inline void acpi_processor_syscore_exit(void) {} -#endif - /* in processor_thermal.c */ int acpi_processor_get_limit_info(struct acpi_processor *pr); extern const struct thermal_cooling_device_ops processor_cooling_ops; |