diff options
26 files changed, 1470 insertions, 277 deletions
diff --git a/Documentation/ABI/testing/debugfs-moxtet b/Documentation/ABI/testing/debugfs-moxtet new file mode 100644 index 000000000000..67b1717794d8 --- /dev/null +++ b/Documentation/ABI/testing/debugfs-moxtet @@ -0,0 +1,23 @@ +What: /sys/kernel/debug/moxtet/input +Date: March 2019 +KernelVersion: 5.3 +Contact: Marek Behún <marek.behun@nic.cz> +Description: (R) Read input from the shift registers, in hexadecimal. + Returns N+1 bytes, where N is the number of Moxtet connected + modules. The first byte is from the CPU board itself. + Example: 101214 + 10: CPU board with SD card + 12: 2 = PCIe module, 1 = IRQ not active + 14: 4 = Peridot module, 1 = IRQ not active + +What: /sys/kernel/debug/moxtet/output +Date: March 2019 +KernelVersion: 5.3 +Contact: Marek Behún <marek.behun@nic.cz> +Description: (RW) Read last written value to the shift registers, in + hexadecimal, or write values to the shift registers, also + in hexadecimal. + Example: 0102 + 01: 01 was last written, or is to be written, to the + first module's shift register + 02: the same for second module diff --git a/Documentation/ABI/testing/sysfs-bus-moxtet-devices b/Documentation/ABI/testing/sysfs-bus-moxtet-devices new file mode 100644 index 000000000000..355958527fa3 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-moxtet-devices @@ -0,0 +1,17 @@ +What: /sys/bus/moxtet/devices/moxtet-<name>.<addr>/module_description +Date: March 2019 +KernelVersion: 5.3 +Contact: Marek Behún <marek.behun@nic.cz> +Description: (R) Moxtet module description. Format: string + +What: /sys/bus/moxtet/devices/moxtet-<name>.<addr>/module_id +Date: March 2019 +KernelVersion: 5.3 +Contact: Marek Behún <marek.behun@nic.cz> +Description: (R) Moxtet module ID. Format: %x + +What: /sys/bus/moxtet/devices/moxtet-<name>.<addr>/module_name +Date: March 2019 +KernelVersion: 5.3 +Contact: Marek Behún <marek.behun@nic.cz> +Description: (R) Moxtet module name. Format: string diff --git a/Documentation/devicetree/bindings/bus/moxtet.txt b/Documentation/devicetree/bindings/bus/moxtet.txt new file mode 100644 index 000000000000..fb50fc865336 --- /dev/null +++ b/Documentation/devicetree/bindings/bus/moxtet.txt @@ -0,0 +1,46 @@ +Turris Mox module status and configuration bus (over SPI) + +Required properties: + - compatible : Should be "cznic,moxtet" + - #address-cells : Has to be 1 + - #size-cells : Has to be 0 + - spi-cpol : Required inverted clock polarity + - spi-cpha : Required shifted clock phase + - interrupts : Must contain reference to the shared interrupt line + - interrupt-controller : Required + - #interrupt-cells : Has to be 1 + +For other required and optional properties of SPI slave nodes please refer to +../spi/spi-bus.txt. + +Required properties of subnodes: + - reg : Should be position on the Moxtet bus (how many Moxtet + modules are between this module and CPU module, so + either 0 or a positive integer) + +The driver finds the devices connected to the bus by itself, but it may be +needed to reference some of them from other parts of the device tree. In that +case the devices can be defined as subnodes of the moxtet node. + +Example: + + moxtet@1 { + compatible = "cznic,moxtet"; + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + spi-max-frequency = <10000000>; + spi-cpol; + spi-cpha; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&gpiosb>; + interrupts = <5 IRQ_TYPE_EDGE_FALLING>; + + moxtet_sfp: gpio@0 { + compatible = "cznic,moxtet-gpio"; + gpio-controller; + #gpio-cells = <2>; + reg = <0>; + } + }; diff --git a/Documentation/devicetree/bindings/gpio/gpio-moxtet.txt b/Documentation/devicetree/bindings/gpio/gpio-moxtet.txt new file mode 100644 index 000000000000..410759de9f09 --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/gpio-moxtet.txt @@ -0,0 +1,18 @@ +Turris Mox Moxtet GPIO expander via Moxtet bus + +Required properties: + - compatible : Should be "cznic,moxtet-gpio". + - gpio-controller : Marks the device node as a GPIO controller. + - #gpio-cells : Should be two. For consumer use see gpio.txt. + +Other properties are required for a Moxtet bus device, please refer to +Documentation/devicetree/bindings/bus/moxtet.txt. + +Example: + + moxtet_sfp: gpio@0 { + compatible = "cznic,moxtet-gpio"; + gpio-controller; + #gpio-cells = <2>; + reg = <0>; + } diff --git a/Documentation/devicetree/bindings/reset/fsl,imx7-src.txt b/Documentation/devicetree/bindings/reset/fsl,imx7-src.txt index 13e095182db4..c2489e41a801 100644 --- a/Documentation/devicetree/bindings/reset/fsl,imx7-src.txt +++ b/Documentation/devicetree/bindings/reset/fsl,imx7-src.txt @@ -8,6 +8,7 @@ Required properties: - compatible: - For i.MX7 SoCs should be "fsl,imx7d-src", "syscon" - For i.MX8MQ SoCs should be "fsl,imx8mq-src", "syscon" + - For i.MX8MM SoCs should be "fsl,imx8mm-src", "fsl,imx8mq-src", "syscon" - reg: should be register base and length as documented in the datasheet - interrupts: Should contain SRC interrupt @@ -46,5 +47,6 @@ Example: For list of all valid reset indices see -<dt-bindings/reset/imx7-reset.h> for i.MX7 and -<dt-bindings/reset/imx8mq-reset.h> for i.MX8MQ +<dt-bindings/reset/imx7-reset.h> for i.MX7, +<dt-bindings/reset/imx8mq-reset.h> for i.MX8MQ and +<dt-bindings/reset/imx8mq-reset.h> for i.MX8MM diff --git a/Documentation/devicetree/bindings/reset/snps,dw-reset.txt b/Documentation/devicetree/bindings/reset/snps,dw-reset.txt new file mode 100644 index 000000000000..f94f911dd98d --- /dev/null +++ b/Documentation/devicetree/bindings/reset/snps,dw-reset.txt @@ -0,0 +1,30 @@ +Synopsys DesignWare Reset controller +======================================= + +Please also refer to reset.txt in this directory for common reset +controller binding usage. + +Required properties: + +- compatible: should be one of the following. + "snps,dw-high-reset" - for active high configuration + "snps,dw-low-reset" - for active low configuration + +- reg: physical base address of the controller and length of memory mapped + region. + +- #reset-cells: must be 1. + +example: + + dw_rst_1: reset-controller@0000 { + compatible = "snps,dw-high-reset"; + reg = <0x0000 0x4>; + #reset-cells = <1>; + }; + + dw_rst_2: reset-controller@1000 {i + compatible = "snps,dw-low-reset"; + reg = <0x1000 0x8>; + #reset-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe.txt b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe.txt index d7afaff5faff..05ec2a838c54 100644 --- a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe.txt +++ b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe.txt @@ -18,7 +18,8 @@ Required properties: - reg : offset and length of the device registers. - bus-frequency : the clock frequency for QUICC Engine. - fsl,qe-num-riscs: define how many RISC engines the QE has. -- fsl,qe-num-snums: define how many serial number(SNUM) the QE can use for the +- fsl,qe-snums: This property has to be specified as '/bits/ 8' value, + defining the array of serial number (SNUM) values for the virtual threads. Optional properties: @@ -34,6 +35,11 @@ Recommended properties - brg-frequency : the internal clock source frequency for baud-rate generators in Hz. +Deprecated properties +- fsl,qe-num-snums: define how many serial number(SNUM) the QE can use + for the threads. Use fsl,qe-snums instead to not only specify the + number of snums, but also their values. + Example: qe@e0100000 { #address-cells = <1>; @@ -44,6 +50,11 @@ Example: reg = <e0100000 480>; brg-frequency = <0>; bus-frequency = <179A7B00>; + fsl,qe-snums = /bits/ 8 < + 0x04 0x05 0x0C 0x0D 0x14 0x15 0x1C 0x1D + 0x24 0x25 0x2C 0x2D 0x34 0x35 0x88 0x89 + 0x98 0x99 0xA8 0xA9 0xB8 0xB9 0xC8 0xC9 + 0xD8 0xD9 0xE8 0xE9>; } * Multi-User RAM (MURAM) diff --git a/MAINTAINERS b/MAINTAINERS index 59df8f88b56d..bd95faf18f40 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1626,6 +1626,18 @@ F: drivers/clocksource/timer-atlas7.c N: [^a-z]sirf X: drivers/gnss +ARM/CZ.NIC TURRIS MOX SUPPORT +M: Marek Behun <marek.behun@nic.cz> +W: http://mox.turris.cz +S: Maintained +F: Documentation/ABI/testing/debugfs-moxtet +F: Documentation/ABI/testing/sysfs-bus-moxtet-devices +F: Documentation/devicetree/bindings/bus/moxtet.txt +F: Documentation/devicetree/bindings/gpio/gpio-moxtet.txt +F: include/linux/moxtet.h +F: drivers/bus/moxtet.c +F: drivers/gpio/gpio-moxtet.c + ARM/EBSA110 MACHINE SUPPORT M: Russell King <linux@armlinux.org.uk> L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) diff --git a/drivers/bus/Kconfig b/drivers/bus/Kconfig index 1851112ccc29..6b331061d34b 100644 --- a/drivers/bus/Kconfig +++ b/drivers/bus/Kconfig @@ -29,6 +29,16 @@ config BRCMSTB_GISB_ARB arbiter. This driver provides timeout and target abort error handling and internal bus master decoding. +config MOXTET + tristate "CZ.NIC Turris Mox module configuration bus" + depends on SPI_MASTER && OF + help + Say yes here to add support for the module configuration bus found + on CZ.NIC's Turris Mox. This is needed for the ability to discover + the order in which the modules are connected and to get/set some of + their settings. For example the GPIOs on Mox SFP module are + configured through this bus. + config HISILICON_LPC bool "Support for ISA I/O space on HiSilicon Hip06/7" depends on ARM64 && (ARCH_HISI || COMPILE_TEST) diff --git a/drivers/bus/Makefile b/drivers/bus/Makefile index ca300b1914ce..16b43d3468c6 100644 --- a/drivers/bus/Makefile +++ b/drivers/bus/Makefile @@ -8,6 +8,7 @@ obj-$(CONFIG_ARM_CCI) += arm-cci.o obj-$(CONFIG_HISILICON_LPC) += hisi_lpc.o obj-$(CONFIG_BRCMSTB_GISB_ARB) += brcmstb_gisb.o +obj-$(CONFIG_MOXTET) += moxtet.o # DPAA2 fsl-mc bus obj-$(CONFIG_FSL_MC_BUS) += fsl-mc/ diff --git a/drivers/bus/moxtet.c b/drivers/bus/moxtet.c new file mode 100644 index 000000000000..1ee4570e7e17 --- /dev/null +++ b/drivers/bus/moxtet.c @@ -0,0 +1,886 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Turris Mox module configuration bus driver + * + * Copyright (C) 2019 Marek Behun <marek.behun@nic.cz> + */ + +#include <dt-bindings/bus/moxtet.h> +#include <linux/bitops.h> +#include <linux/debugfs.h> +#include <linux/interrupt.h> +#include <linux/module.h> +#include <linux/moxtet.h> +#include <linux/mutex.h> +#include <linux/of_device.h> +#include <linux/of_irq.h> +#include <linux/spi/spi.h> + +/* + * @name: module name for sysfs + * @hwirq_base: base index for IRQ for this module (-1 if no IRQs) + * @nirqs: how many interrupts does the shift register provide + * @desc: module description for kernel log + */ +static const struct { + const char *name; + int hwirq_base; + int nirqs; + const char *desc; +} mox_module_table[] = { + /* do not change order of this array! */ + { NULL, 0, 0, NULL }, + { "sfp", -1, 0, "MOX D (SFP cage)" }, + { "pci", MOXTET_IRQ_PCI, 1, "MOX B (Mini-PCIe)" }, + { "topaz", MOXTET_IRQ_TOPAZ, 1, "MOX C (4 port switch)" }, + { "peridot", MOXTET_IRQ_PERIDOT(0), 1, "MOX E (8 port switch)" }, + { "usb3", MOXTET_IRQ_USB3, 2, "MOX F (USB 3.0)" }, + { "pci-bridge", -1, 0, "MOX G (Mini-PCIe bridge)" }, +}; + +static inline bool mox_module_known(unsigned int id) +{ + return id >= TURRIS_MOX_MODULE_FIRST && id <= TURRIS_MOX_MODULE_LAST; +} + +static inline const char *mox_module_name(unsigned int id) +{ + if (mox_module_known(id)) + return mox_module_table[id].name; + else + return "unknown"; +} + +#define DEF_MODULE_ATTR(name, fmt, ...) \ +static ssize_t \ +module_##name##_show(struct device *dev, struct device_attribute *a, \ + char *buf) \ +{ \ + struct moxtet_device *mdev = to_moxtet_device(dev); \ + return sprintf(buf, (fmt), __VA_ARGS__); \ +} \ +static DEVICE_ATTR_RO(module_##name) + +DEF_MODULE_ATTR(id, "0x%x\n", mdev->id); +DEF_MODULE_ATTR(name, "%s\n", mox_module_name(mdev->id)); +DEF_MODULE_ATTR(description, "%s\n", + mox_module_known(mdev->id) ? mox_module_table[mdev->id].desc + : ""); + +static struct attribute *moxtet_dev_attrs[] = { + &dev_attr_module_id.attr, + &dev_attr_module_name.attr, + &dev_attr_module_description.attr, + NULL, +}; + +static const struct attribute_group moxtet_dev_group = { + .attrs = moxtet_dev_attrs, +}; + +static const struct attribute_group *moxtet_dev_groups[] = { + &moxtet_dev_group, + NULL, +}; + +static int moxtet_match(struct device *dev, struct device_driver *drv) +{ + struct moxtet_device *mdev = to_moxtet_device(dev); + struct moxtet_driver *tdrv = to_moxtet_driver(drv); + const enum turris_mox_module_id *t; + + if (of_driver_match_device(dev, drv)) + return 1; + + if (!tdrv->id_table) + return 0; + + for (t = tdrv->id_table; *t; ++t) + if (*t == mdev->id) + return 1; + + return 0; +} + +struct bus_type moxtet_bus_type = { + .name = "moxtet", + .dev_groups = moxtet_dev_groups, + .match = moxtet_match, +}; +EXPORT_SYMBOL_GPL(moxtet_bus_type); + +int __moxtet_register_driver(struct module *owner, + struct moxtet_driver *mdrv) +{ + mdrv->driver.owner = owner; + mdrv->driver.bus = &moxtet_bus_type; + return driver_register(&mdrv->driver); +} +EXPORT_SYMBOL_GPL(__moxtet_register_driver); + +static int moxtet_dev_check(struct device *dev, void *data) +{ + struct moxtet_device *mdev = to_moxtet_device(dev); + struct moxtet_device *new_dev = data; + + if (mdev->moxtet == new_dev->moxtet && mdev->id == new_dev->id && + mdev->idx == new_dev->idx) + return -EBUSY; + return 0; +} + +static void moxtet_dev_release(struct device *dev) +{ + struct moxtet_device *mdev = to_moxtet_device(dev); + + put_device(mdev->moxtet->dev); + kfree(mdev); +} + +static struct moxtet_device * +moxtet_alloc_device(struct moxtet *moxtet) +{ + struct moxtet_device *dev; + + if (!get_device(moxtet->dev)) + return NULL; + + dev = kzalloc(sizeof(*dev), GFP_KERNEL); + if (!dev) { + put_device(moxtet->dev); + return NULL; + } + + dev->moxtet = moxtet; + dev->dev.parent = moxtet->dev; + dev->dev.bus = &moxtet_bus_type; + dev->dev.release = moxtet_dev_release; + + device_initialize(&dev->dev); + + return dev; +} + +static int moxtet_add_device(struct moxtet_device *dev) +{ + static DEFINE_MUTEX(add_mutex); + int ret; + + if (dev->idx >= TURRIS_MOX_MAX_MODULES || dev->id > 0xf) + return -EINVAL; + + dev_set_name(&dev->dev, "moxtet-%s.%u", mox_module_name(dev->id), + dev->idx); + + mutex_lock(&add_mutex); + + ret = bus_for_each_dev(&moxtet_bus_type, NULL, dev, + moxtet_dev_check); + if (ret) + goto done; + + ret = device_add(&dev->dev); + if (ret < 0) + dev_err(dev->moxtet->dev, "can't add %s, status %d\n", + dev_name(dev->moxtet->dev), ret); + +done: + mutex_unlock(&add_mutex); + return ret; +} + +static int __unregister(struct device *dev, void *null) +{ + if (dev->of_node) { + of_node_clear_flag(dev->of_node, OF_POPULATED); + of_node_put(dev->of_node); + } + + device_unregister(dev); + + return 0; +} + +static struct moxtet_device * +of_register_moxtet_device(struct moxtet *moxtet, struct device_node *nc) +{ + struct moxtet_device *dev; + u32 val; + int ret; + + dev = moxtet_alloc_device(moxtet); + if (!dev) { + dev_err(moxtet->dev, + "Moxtet device alloc error for %pOF\n", nc); + return ERR_PTR(-ENOMEM); + } + + ret = of_property_read_u32(nc, "reg", &val); + if (ret) { + dev_err(moxtet->dev, "%pOF has no valid 'reg' property (%d)\n", + nc, ret); + goto err_put; + } + + dev->idx = val; + + if (dev->idx >= TURRIS_MOX_MAX_MODULES) { + dev_err(moxtet->dev, "%pOF Moxtet address 0x%x out of range\n", + nc, dev->idx); + ret = -EINVAL; + goto err_put; + } + + dev->id = moxtet->modules[dev->idx]; + + if (!dev->id) { + dev_err(moxtet->dev, "%pOF Moxtet address 0x%x is empty\n", nc, + dev->idx); + ret = -ENODEV; + goto err_put; + } + + of_node_get(nc); + dev->dev.of_node = nc; + + ret = moxtet_add_device(dev); + if (ret) { + dev_err(moxtet->dev, + "Moxtet device register error for %pOF\n", nc); + of_node_put(nc); + goto err_put; + } + + return dev; + +err_put: + put_device(&dev->dev); + return ERR_PTR(ret); +} + +static void of_register_moxtet_devices(struct moxtet *moxtet) +{ + struct moxtet_device *dev; + struct device_node *nc; + + if (!moxtet->dev->of_node) + return; + + for_each_available_child_of_node(moxtet->dev->of_node, nc) { + if (of_node_test_and_set_flag(nc, OF_POPULATED)) + continue; + dev = of_register_moxtet_device(moxtet, nc); + if (IS_ERR(dev)) { + dev_warn(moxtet->dev, + "Failed to create Moxtet device for %pOF\n", + nc); + of_node_clear_flag(nc, OF_POPULATED); + } + } +} + +static void +moxtet_register_devices_from_topology(struct moxtet *moxtet) +{ + struct moxtet_device *dev; + int i, ret; + + for (i = 0; i < moxtet->count; ++i) { + dev = moxtet_alloc_device(moxtet); + if (!dev) { + dev_err(moxtet->dev, "Moxtet device %u alloc error\n", + i); + continue; + } + + dev->idx = i; + dev->id = moxtet->modules[i]; + + ret = moxtet_add_device(dev); + if (ret && ret != -EBUSY) { + put_device(&dev->dev); + dev_err(moxtet->dev, + "Moxtet device %u register error: %i\n", i, + ret); + } + } +} + +/* + * @nsame: how many modules with same id are already in moxtet->modules + */ +static int moxtet_set_irq(struct moxtet *moxtet, int idx, int id, int nsame) +{ + int i, first; + struct moxtet_irqpos *pos; + + first = mox_module_table[id].hwirq_base + + nsame * mox_module_table[id].nirqs; + + if (first + mox_module_table[id].nirqs > MOXTET_NIRQS) + return -EINVAL; + + for (i = 0; i < mox_module_table[id].nirqs; ++i) { + pos = &moxtet->irq.position[first + i]; + pos->idx = idx; + pos->bit = i; + moxtet->irq.exists |= BIT(first + i); + } + + return 0; +} + +static int moxtet_find_topology(struct moxtet *moxtet) +{ + u8 buf[TURRIS_MOX_MAX_MODULES]; + int cnts[TURRIS_MOX_MODULE_LAST]; + int i, ret; + + memset(cnts, 0, sizeof(cnts)); + + ret = spi_read(to_spi_device(moxtet->dev), buf, TURRIS_MOX_MAX_MODULES); + if (ret < 0) + return ret; + + if (buf[0] == TURRIS_MOX_CPU_ID_EMMC) { + dev_info(moxtet->dev, "Found MOX A (eMMC CPU) module\n"); + } else if (buf[0] == TURRIS_MOX_CPU_ID_SD) { + dev_info(moxtet->dev, "Found MOX A (CPU) module\n"); + } else { + dev_err(moxtet->dev, "Invalid Turris MOX A CPU module 0x%02x\n", + buf[0]); + return -ENODEV; + } + + moxtet->count = 0; + + for (i = 1; i < TURRIS_MOX_MAX_MODULES; ++i) { + int id; + + if (buf[i] == 0xff) + break; + + id = buf[i] & 0xf; + + moxtet->modules[i-1] = id; + ++moxtet->count; + + if (mox_module_known(id)) { + dev_info(moxtet->dev, "Found %s module\n", + mox_module_table[id].desc); + + if (moxtet_set_irq(moxtet, i-1, id, cnts[id]++) < 0) + dev_err(moxtet->dev, + " Cannot set IRQ for module %s\n", + mox_module_table[id].desc); + } else { + dev_warn(moxtet->dev, + "Unknown Moxtet module found (ID 0x%02x)\n", + id); + } + } + + return 0; +} + +static int moxtet_spi_read(struct moxtet *moxtet, u8 *buf) +{ + struct spi_transfer xfer = { + .rx_buf = buf, + .tx_buf = moxtet->tx, + .len = moxtet->count + 1 + }; + int ret; + + mutex_lock(&moxtet->lock); + + ret = spi_sync_transfer(to_spi_device(moxtet->dev), &xfer, 1); + + mutex_unlock(&moxtet->lock); + + return ret; +} + +int moxtet_device_read(struct device *dev) +{ + struct moxtet_device *mdev = to_moxtet_device(dev); + struct moxtet *moxtet = mdev->moxtet; + u8 buf[TURRIS_MOX_MAX_MODULES]; + int ret; + + if (mdev->idx >= moxtet->count) + return -EINVAL; + + ret = moxtet_spi_read(moxtet, buf); + if (ret < 0) + return ret; + + return buf[mdev->idx + 1] >> 4; +} +EXPORT_SYMBOL_GPL(moxtet_device_read); + +int moxtet_device_write(struct device *dev, u8 val) +{ + struct moxtet_device *mdev = to_moxtet_device(dev); + struct moxtet *moxtet = mdev->moxtet; + int ret; + + if (mdev->idx >= moxtet->count) + return -EINVAL; + + mutex_lock(&moxtet->lock); + + moxtet->tx[moxtet->count - mdev->idx] = val; + + ret = spi_write(to_spi_device(moxtet->dev), moxtet->tx, + moxtet->count + 1); + + mutex_unlock(&moxtet->lock); + + return ret; +} +EXPORT_SYMBOL_GPL(moxtet_device_write); + +int moxtet_device_written(struct device *dev) +{ + struct moxtet_device *mdev = to_moxtet_device(dev); + struct moxtet *moxtet = mdev->moxtet; + + if (mdev->idx >= moxtet->count) + return -EINVAL; + + return moxtet->tx[moxtet->count - mdev->idx]; +} +EXPORT_SYMBOL_GPL(moxtet_device_written); + +#ifdef CONFIG_DEBUG_FS +static int moxtet_debug_open(struct inode *inode, struct file *file) +{ + file->private_data = inode->i_private; + + return nonseekable_open(inode, file); +} + +static ssize_t input_read(struct file *file, char __user *buf, size_t len, + loff_t *ppos) +{ + struct moxtet *moxtet = file->private_data; + u8 bin[TURRIS_MOX_MAX_MODULES]; + u8 hex[sizeof(buf) * 2 + 1]; + int ret, n; + + ret = moxtet_spi_read(moxtet, bin); + if (ret < 0) + return ret; + + n = moxtet->count + 1; + bin2hex(hex, bin, n); + + hex[2*n] = '\n'; + + return simple_read_from_buffer(buf, len, ppos, hex, 2*n + 1); +} + +static const struct file_operations input_fops = { + .owner = THIS_MODULE, + .open = moxtet_debug_open, + .read = input_read, + .llseek = no_llseek, +}; + +static ssize_t output_read(struct file *file, char __user *buf, size_t len, + loff_t *ppos) +{ + struct moxtet *moxtet = file->private_data; + u8 hex[TURRIS_MOX_MAX_MODULES * 2 + 1]; + u8 *p = hex; + int i; + + mutex_lock(&moxtet->lock); + + for (i = 0; i < moxtet->count; ++i) + p = hex_byte_pack(p, moxtet->tx[moxtet->count - i]); + + mutex_unlock(&moxtet->lock); + + *p++ = '\n'; + + return simple_read_from_buffer(buf, len, ppos, hex, p - hex); +} + +static ssize_t output_write(struct file *file, const char __user *buf, + size_t len, loff_t *ppos) +{ + struct moxtet *moxtet = file->private_data; + u8 bin[TURRIS_MOX_MAX_MODULES]; + u8 hex[sizeof(bin) * 2 + 1]; + size_t res; + loff_t dummy = 0; + int err, i; + + if (len > 2 * moxtet->count + 1 || len < 2 * moxtet->count) + return -EINVAL; + + res = simple_write_to_buffer(hex, sizeof(hex), &dummy, buf, len); + if (res < 0) + return res; + + if (len % 2 == 1 && hex[len - 1] != '\n') + return -EINVAL; + + err = hex2bin(bin, hex, moxtet->count); + if (err < 0) + return -EINVAL; + + mutex_lock(&moxtet->lock); + + for (i = 0; i < moxtet->count; ++i) + moxtet->tx[moxtet->count - i] = bin[i]; + + err = spi_write(to_spi_device(moxtet->dev), moxtet->tx, + moxtet->count + 1); + + mutex_unlock(&moxtet->lock); + + return err < 0 ? err : len; +} + +static const struct file_operations output_fops = { + .owner = THIS_MODULE, + .open = moxtet_debug_open, + .read = output_read, + .write = output_write, + .llseek = no_llseek, +}; + +static int moxtet_register_debugfs(struct moxtet *moxtet) +{ + struct dentry *root, *entry; + + root = debugfs_create_dir("moxtet", NULL); + + if (IS_ERR(root)) + return PTR_ERR(root); + + entry = debugfs_create_file_unsafe("input", 0444, root, moxtet, + &input_fops); + if (IS_ERR(entry)) + goto err_remove; + + entry = debugfs_create_file_unsafe("output", 0644, root, moxtet, + &output_fops); + if (IS_ERR(entry)) + goto err_remove; + + moxtet->debugfs_root = root; + + return 0; +err_remove: + debugfs_remove_recursive(root); + return PTR_ERR(entry); +} + +static void moxtet_unregister_debugfs(struct moxtet *moxtet) +{ + debugfs_remove_recursive(moxtet->debugfs_root); +} +#else +static inline int moxtet_register_debugfs(struct moxtet *moxtet) +{ + return 0; +} + +static inline void moxtet_unregister_debugfs(struct moxtet *moxtet) +{ +} +#endif + +static int moxtet_irq_domain_map(struct irq_domain *d, unsigned int irq, + irq_hw_number_t hw) +{ + struct moxtet *moxtet = d->host_data; + + if (hw >= MOXTET_NIRQS || !(moxtet->irq.exists & BIT(hw))) { + dev_err(moxtet->dev, "Invalid hw irq number\n"); + return -EINVAL; + } + + irq_set_chip_data(irq, d->host_data); + irq_set_chip_and_handler(irq, &moxtet->irq.chip, handle_level_irq); + + return 0; +} + +static int moxtet_irq_domain_xlate(struct irq_domain *d, + struct device_node *ctrlr, + const u32 *intspec, unsigned int intsize, + unsigned long *out_hwirq, + unsigned int *out_type) +{ + struct moxtet *moxtet = d->host_data; + int irq; + + if (WARN_ON(intsize < 1)) + return -EINVAL; + + irq = intspec[0]; + + if (irq >= MOXTET_NIRQS || !(moxtet->irq.exists & BIT(irq))) + return -EINVAL; + + *out_hwirq = irq; + *out_type = IRQ_TYPE_NONE; + return 0; +} + +static const struct irq_domain_ops moxtet_irq_domain = { + .map = moxtet_irq_domain_map, + .xlate = moxtet_irq_domain_xlate, +}; + +static void moxtet_irq_mask(struct irq_data *d) +{ + struct moxtet *moxtet = irq_data_get_irq_chip_data(d); + + moxtet->irq.masked |= BIT(d->hwirq); +} + +static void moxtet_irq_unmask(struct irq_data *d) +{ + struct moxtet *moxtet = irq_data_get_irq_chip_data(d); + + moxtet->irq.masked &= ~BIT(d->hwirq); +} + +static void moxtet_irq_print_chip(struct irq_data *d, struct seq_file *p) +{ + struct moxtet *moxtet = irq_data_get_irq_chip_data(d); + struct moxtet_irqpos *pos = &moxtet->irq.position[d->hwirq]; + int id; + + id = moxtet->modules[pos->idx]; + + seq_printf(p, " moxtet-%s.%i#%i", mox_module_name(id), pos->idx, + pos->bit); +} + +static const struct irq_chip moxtet_irq_chip = { + .name = "moxtet", + .irq_mask = moxtet_irq_mask, + .irq_unmask = moxtet_irq_unmask, + .irq_print_chip = moxtet_irq_print_chip, +}; + +static int moxtet_irq_read(struct moxtet *moxtet, unsigned long *map) +{ + struct moxtet_irqpos *pos = moxtet->irq.position; + u8 buf[TURRIS_MOX_MAX_MODULES]; + int i, ret; + + ret = moxtet_spi_read(moxtet, buf); + if (ret < 0) + return ret; + + *map = 0; + + for_each_set_bit(i, &moxtet->irq.exists, MOXTET_NIRQS) { + if (!(buf[pos[i].idx + 1] & BIT(4 + pos[i].bit))) + set_bit(i, map); + } + + return 0; +} + +static irqreturn_t moxtet_irq_thread_fn(int irq, void *data) +{ + struct moxtet *moxtet = data; + unsigned long set; + int nhandled = 0, i, sub_irq, ret; + + ret = moxtet_irq_read(moxtet, &set); + if (ret < 0) + goto out; + + set &= ~moxtet->irq.masked; + + do { + for_each_set_bit(i, &set, MOXTET_NIRQS) { + sub_irq = irq_find_mapping(moxtet->irq.domain, i); + handle_nested_irq(sub_irq); + dev_dbg(moxtet->dev, "%i irq\n", i); + ++nhandled; + } + + ret = moxtet_irq_read(moxtet, &set); + if (ret < 0) + goto out; + + set &= ~moxtet->irq.masked; + } while (set); + +out: + return (nhandled > 0 ? IRQ_HANDLED : IRQ_NONE); +} + +static void moxtet_irq_free(struct moxtet *moxtet) +{ + int i, irq; + + for (i = 0; i < MOXTET_NIRQS; ++i) { + if (moxtet->irq.exists & BIT(i)) { + irq = irq_find_mapping(moxtet->irq.domain, i); + irq_dispose_mapping(irq); + } + } + + irq_domain_remove(moxtet->irq.domain); +} + +static int moxtet_irq_setup(struct moxtet *moxtet) +{ + int i, ret; + + moxtet->irq.domain = irq_domain_add_simple(moxtet->dev->of_node, + MOXTET_NIRQS, 0, + &moxtet_irq_domain, moxtet); + if (moxtet->irq.domain == NULL) { + dev_err(moxtet->dev, "Could not add IRQ domain\n"); + return -ENOMEM; + } + + for (i = 0; i < MOXTET_NIRQS; ++i) + if (moxtet->irq.exists & BIT(i)) + irq_create_mapping(moxtet->irq.domain, i); + + moxtet->irq.chip = moxtet_irq_chip; + moxtet->irq.masked = ~0; + + ret = request_threaded_irq(moxtet->dev_irq, NULL, moxtet_irq_thread_fn, + IRQF_ONESHOT, "moxtet", moxtet); + if (ret < 0) + goto err_free; + + return 0; + +err_free: + moxtet_irq_free(moxtet); + return ret; +} + +static int moxtet_probe(struct spi_device *spi) +{ + struct moxtet *moxtet; + int ret; + + ret = spi_setup(spi); + if (ret < 0) + return ret; + + moxtet = devm_kzalloc(&spi->dev, sizeof(struct moxtet), + GFP_KERNEL); + if (!moxtet) + return -ENOMEM; + + moxtet->dev = &spi->dev; + spi_set_drvdata(spi, moxtet); + + mutex_init(&moxtet->lock); + + moxtet->dev_irq = of_irq_get(moxtet->dev->of_node, 0); + if (moxtet->dev_irq == -EPROBE_DEFER) + return -EPROBE_DEFER; + + if (moxtet->dev_irq <= 0) { + dev_err(moxtet->dev, "No IRQ resource found\n"); + return -ENXIO; + } + + ret = moxtet_find_topology(moxtet); + if (ret < 0) + return ret; + + if (moxtet->irq.exists) { + ret = moxtet_irq_setup(moxtet); + if (ret < 0) + return ret; + } + + of_register_moxtet_devices(moxtet); + moxtet_register_devices_from_topology(moxtet); + + ret = moxtet_register_debugfs(moxtet); + if (ret < 0) + dev_warn(moxtet->dev, "Failed creating debugfs entries: %i\n", + ret); + + return 0; +} + +static int moxtet_remove(struct spi_device *spi) +{ + struct moxtet *moxtet = spi_get_drvdata(spi); + int dummy; + + free_irq(moxtet->dev_irq, moxtet); + + moxtet_irq_free(moxtet); + + moxtet_unregister_debugfs(moxtet); + + dummy = device_for_each_child(moxtet->dev, NULL, __unregister); + + mutex_destroy(&moxtet->lock); + + return 0; +} + +static const struct of_device_id moxtet_dt_ids[] = { + { .compatible = "cznic,moxtet" }, + {}, +}; +MODULE_DEVICE_TABLE(of, moxtet_dt_ids); + +static struct spi_driver moxtet_spi_driver = { + .driver = { + .name = "moxtet", + .of_match_table = moxtet_dt_ids, + }, + .probe = moxtet_probe, + .remove = moxtet_remove, +}; + +static int __init moxtet_init(void) +{ + int ret; + + ret = bus_register(&moxtet_bus_type); + if (ret < 0) { + pr_err("moxtet bus registration failed: %d\n", ret); + goto error; + } + + ret = spi_register_driver(&moxtet_spi_driver); + if (ret < 0) { + pr_err("moxtet spi driver registration failed: %d\n", ret); + goto error_bus; + } + + return 0; + +error_bus: + bus_unregister(&moxtet_bus_type); +error: + return ret; +} +postcore_initcall_sync(moxtet_init); + +static void __exit moxtet_exit(void) +{ + spi_unregister_driver(&moxtet_spi_driver); + bus_unregister(&moxtet_bus_type); +} +module_exit(moxtet_exit); + +MODULE_AUTHOR("Marek Behun <marek.behun@nic.cz>"); +MODULE_DESCRIPTION("CZ.NIC's Turris Mox module configuration bus"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index bb13c266c329..eef4886a3bc3 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -1445,6 +1445,15 @@ config GPIO_XRA1403 help GPIO driver for EXAR XRA1403 16-bit SPI-based GPIO expander. +config GPIO_MOXTET + tristate "Turris Mox Moxtet bus GPIO expander" + depends on MOXTET + help + Say yes here if you are building for the Turris Mox router. + This is the driver needed for configuring the GPIOs via the Moxtet + bus. For example the Mox module with SFP cage needs this driver + so that phylink can use corresponding GPIOs. + endmenu menu "USB GPIO expanders" diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index a4e91175c708..2e10caec23ae 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -93,6 +93,7 @@ obj-$(CONFIG_GPIO_ML_IOH) += gpio-ml-ioh.o obj-$(CONFIG_GPIO_MLXBF) += gpio-mlxbf.o obj-$(CONFIG_GPIO_MM_LANTIQ) += gpio-mm-lantiq.o obj-$(CONFIG_GPIO_MOCKUP) += gpio-mockup.o +obj-$(CONFIG_GPIO_MOXTET) += gpio-moxtet.o obj-$(CONFIG_GPIO_MPC5200) += gpio-mpc5200.o obj-$(CONFIG_GPIO_MPC8XXX) += gpio-mpc8xxx.o obj-$(CONFIG_GPIO_MSIC) += gpio-msic.o diff --git a/drivers/gpio/gpio-moxtet.c b/drivers/gpio/gpio-moxtet.c new file mode 100644 index 000000000000..3fd729994a38 --- /dev/null +++ b/drivers/gpio/gpio-moxtet.c @@ -0,0 +1,179 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Turris Mox Moxtet GPIO expander + * + * Copyright (C) 2018 Marek Behun <marek.behun@nic.cz> + */ + +#include <linux/bitops.h> +#include <linux/gpio/driver.h> +#include <linux/moxtet.h> +#include <linux/module.h> + +#define MOXTET_GPIO_NGPIOS 12 +#define MOXTET_GPIO_INPUTS 4 + +struct moxtet_gpio_desc { + u16 in_mask; + u16 out_mask; +}; + +static const struct moxtet_gpio_desc descs[] = { + [TURRIS_MOX_MODULE_SFP] = { + .in_mask = GENMASK(2, 0), + .out_mask = GENMASK(5, 4), + }, +}; + +struct moxtet_gpio_chip { + struct device *dev; + struct gpio_chip gpio_chip; + const struct moxtet_gpio_desc *desc; +}; + +static int moxtet_gpio_get_value(struct gpio_chip *gc, unsigned int offset) +{ + struct moxtet_gpio_chip *chip = gpiochip_get_data(gc); + int ret; + + if (chip->desc->in_mask & BIT(offset)) { + ret = moxtet_device_read(chip->dev); + } else if (chip->desc->out_mask & BIT(offset)) { + ret = moxtet_device_written(chip->dev); + if (ret >= 0) + ret <<= MOXTET_GPIO_INPUTS; + } else { + return -EINVAL; + } + + if (ret < 0) + return ret; + + return !!(ret & BIT(offset)); +} + +static void moxtet_gpio_set_value(struct gpio_chip *gc, unsigned int offset, + int val) +{ + struct moxtet_gpio_chip *chip = gpiochip_get_data(gc); + int state; + + state = moxtet_device_written(chip->dev); + if (state < 0) + return; + + offset -= MOXTET_GPIO_INPUTS; + + if (val) + state |= BIT(offset); + else + state &= ~BIT(offset); + + moxtet_device_write(chip->dev, state); +} + +static int moxtet_gpio_get_direction(struct gpio_chip *gc, unsigned int offset) +{ + struct moxtet_gpio_chip *chip = gpiochip_get_data(gc); + + /* All lines are hard wired to be either input or output, not both. */ + if (chip->desc->in_mask & BIT(offset)) + return 1; + else if (chip->desc->out_mask & BIT(offset)) + return 0; + else + return -EINVAL; +} + +static int moxtet_gpio_direction_input(struct gpio_chip *gc, + unsigned int offset) +{ + struct moxtet_gpio_chip *chip = gpiochip_get_data(gc); + + if (chip->desc->in_mask & BIT(offset)) + return 0; + else if (chip->desc->out_mask & BIT(offset)) + return -ENOTSUPP; + else + return -EINVAL; +} + +static int moxtet_gpio_direction_output(struct gpio_chip *gc, + unsigned int offset, int val) +{ + struct moxtet_gpio_chip *chip = gpiochip_get_data(gc); + + if (chip->desc->out_mask & BIT(offset)) + moxtet_gpio_set_value(gc, offset, val); + else if (chip->desc->in_mask & BIT(offset)) + return -ENOTSUPP; + else + return -EINVAL; + + return 0; +} + +static int moxtet_gpio_probe(struct device *dev) +{ + struct moxtet_gpio_chip *chip; + struct device_node *nc = dev->of_node; + int id; + + id = to_moxtet_device(dev)->id; + + if (id >= ARRAY_SIZE(descs)) { + dev_err(dev, "%pOF Moxtet device id 0x%x is not supported by gpio-moxtet driver\n", + nc, id); + return -ENOTSUPP; + } + + chip = devm_kzalloc(dev, sizeof(*chip), GFP_KERNEL); + if (!chip) + return -ENOMEM; + + chip->dev = dev; + chip->gpio_chip.parent = dev; + chip->desc = &descs[id]; + + dev_set_drvdata(dev, chip); + + chip->gpio_chip.label = dev_name(dev); + chip->gpio_chip.get_direction = moxtet_gpio_get_direction; + chip->gpio_chip.direction_input = moxtet_gpio_direction_input; + chip->gpio_chip.direction_output = moxtet_gpio_direction_output; + chip->gpio_chip.get = moxtet_gpio_get_value; + chip->gpio_chip.set = moxtet_gpio_set_value; + chip->gpio_chip.base = -1; + + chip->gpio_chip.ngpio = MOXTET_GPIO_NGPIOS; + + chip->gpio_chip.can_sleep = true; + chip->gpio_chip.owner = THIS_MODULE; + + return devm_gpiochip_add_data(dev, &chip->gpio_chip, chip); +} + +static const struct of_device_id moxtet_gpio_dt_ids[] = { + { .compatible = "cznic,moxtet-gpio", }, + {}, +}; +MODULE_DEVICE_TABLE(of, moxtet_gpio_dt_ids); + +static const enum turris_mox_module_id moxtet_gpio_module_table[] = { + TURRIS_MOX_MODULE_SFP, + 0, +}; + +static struct moxtet_driver moxtet_gpio_driver = { + .driver = { + .name = "moxtet-gpio", + .of_match_table = moxtet_gpio_dt_ids, + .probe = moxtet_gpio_probe, + }, + .id_table = moxtet_gpio_module_table, +}; +module_moxtet_driver(moxtet_gpio_driver); + +MODULE_AUTHOR("Marek Behun <marek.behun@nic.cz>"); +MODULE_DESCRIPTION("Turris Mox Moxtet GPIO expander"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig index 4178ac11ba85..7b07281aa0ae 100644 --- a/drivers/reset/Kconfig +++ b/drivers/reset/Kconfig @@ -129,7 +129,7 @@ config RESET_SCMI config RESET_SIMPLE bool "Simple Reset Controller Driver" if COMPILE_TEST - default ARCH_STM32 || ARCH_STRATIX10 || ARCH_SUNXI || ARCH_ZX || ARCH_ASPEED || ARCH_BITMAIN + default ARCH_STM32 || ARCH_STRATIX10 || ARCH_SUNXI || ARCH_ZX || ARCH_ASPEED || ARCH_BITMAIN || ARC help This enables a simple reset controller driver for reset lines that that can be asserted and deasserted by toggling bits in a contiguous, diff --git a/drivers/reset/reset-imx7.c b/drivers/reset/reset-imx7.c index 3ecd770f910b..1443a55a0c29 100644 --- a/drivers/reset/reset-imx7.c +++ b/drivers/reset/reset-imx7.c @@ -169,9 +169,9 @@ static const struct imx7_src_signal imx8mq_src_signals[IMX8MQ_RESET_NUM] = { [IMX8MQ_RESET_OTG2_PHY_RESET] = { SRC_USBOPHY2_RCR, BIT(0) }, [IMX8MQ_RESET_MIPI_DSI_RESET_BYTE_N] = { SRC_MIPIPHY_RCR, BIT(1) }, [IMX8MQ_RESET_MIPI_DSI_RESET_N] = { SRC_MIPIPHY_RCR, BIT(2) }, - [IMX8MQ_RESET_MIPI_DIS_DPI_RESET_N] = { SRC_MIPIPHY_RCR, BIT(3) }, - [IMX8MQ_RESET_MIPI_DIS_ESC_RESET_N] = { SRC_MIPIPHY_RCR, BIT(4) }, - [IMX8MQ_RESET_MIPI_DIS_PCLK_RESET_N] = { SRC_MIPIPHY_RCR, BIT(5) }, + [IMX8MQ_RESET_MIPI_DSI_DPI_RESET_N] = { SRC_MIPIPHY_RCR, BIT(3) }, + [IMX8MQ_RESET_MIPI_DSI_ESC_RESET_N] = { SRC_MIPIPHY_RCR, BIT(4) }, + [IMX8MQ_RESET_MIPI_DSI_PCLK_RESET_N] = { SRC_MIPIPHY_RCR, BIT(5) }, [IMX8MQ_RESET_PCIEPHY] = { SRC_PCIEPHY_RCR, BIT(2) | BIT(1) }, [IMX8MQ_RESET_PCIEPHY_PERST] = { SRC_PCIEPHY_RCR, BIT(3) }, @@ -220,9 +220,9 @@ static int imx8mq_reset_set(struct reset_controller_dev *rcdev, case IMX8MQ_RESET_PCIE_CTRL_APPS_EN: case IMX8MQ_RESET_PCIE2_CTRL_APPS_EN: /* fallthrough */ - case IMX8MQ_RESET_MIPI_DIS_PCLK_RESET_N: /* fallthrough */ - case IMX8MQ_RESET_MIPI_DIS_ESC_RESET_N: /* fallthrough */ - case IMX8MQ_RESET_MIPI_DIS_DPI_RESET_N: /* fallthrough */ + case IMX8MQ_RESET_MIPI_DSI_PCLK_RESET_N: /* fallthrough */ + case IMX8MQ_RESET_MIPI_DSI_ESC_RESET_N: /* fallthrough */ + case IMX8MQ_RESET_MIPI_DSI_DPI_RESET_N: /* fallthrough */ case IMX8MQ_RESET_MIPI_DSI_RESET_N: /* fallthrough */ case IMX8MQ_RESET_MIPI_DSI_RESET_BYTE_N: /* fallthrough */ value = assert ? 0 : bit; diff --git a/drivers/reset/reset-meson.c b/drivers/reset/reset-meson.c index 5242e0679df7..7d05d766e1ea 100644 --- a/drivers/reset/reset-meson.c +++ b/drivers/reset/reset-meson.c @@ -1,58 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause /* * Amlogic Meson Reset Controller driver * - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright (c) 2016 BayLibre, SAS. - * Author: Neil Armstrong <narmstrong@baylibre.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see <http://www.gnu.org/licenses/>. - * The full GNU General Public License is included in this distribution - * in the file called COPYING. - * - * BSD LICENSE - * * Copyright (c) 2016 BayLibre, SAS. * Author: Neil Armstrong <narmstrong@baylibre.com> - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #include <linux/err.h> #include <linux/init.h> diff --git a/drivers/reset/reset-simple.c b/drivers/reset/reset-simple.c index 1154f7b1f4dd..067e7e7b34f1 100644 --- a/drivers/reset/reset-simple.c +++ b/drivers/reset/reset-simple.c @@ -127,6 +127,9 @@ static const struct of_device_id reset_simple_dt_ids[] = { { .compatible = "aspeed,ast2500-lpc-reset" }, { .compatible = "bitmain,bm1880-reset", .data = &reset_simple_active_low }, + { .compatible = "snps,dw-high-reset" }, + { .compatible = "snps,dw-low-reset", + .data = &reset_simple_active_low }, { /* sentinel */ }, }; diff --git a/drivers/soc/fsl/dpaa2-console.c b/drivers/soc/fsl/dpaa2-console.c index 9168d8ddc932..27243f706f37 100644 --- a/drivers/soc/fsl/dpaa2-console.c +++ b/drivers/soc/fsl/dpaa2-console.c @@ -73,7 +73,7 @@ static u64 get_mc_fw_base_address(void) mcfbaregs = ioremap(mc_base_addr.start, resource_size(&mc_base_addr)); if (!mcfbaregs) { - pr_err("could not map MC Firmaware Base registers\n"); + pr_err("could not map MC Firmware Base registers\n"); return 0; } diff --git a/drivers/soc/fsl/qe/qe.c b/drivers/soc/fsl/qe/qe.c index 62c6ba17991a..ba38c4bb2a88 100644 --- a/drivers/soc/fsl/qe/qe.c +++ b/drivers/soc/fsl/qe/qe.c @@ -10,6 +10,7 @@ * General Purpose functions for the global management of the * QUICC Engine (QE). */ +#include <linux/bitmap.h> #include <linux/errno.h> #include <linux/sched.h> #include <linux/kernel.h> @@ -39,29 +40,32 @@ static DEFINE_SPINLOCK(qe_lock); DEFINE_SPINLOCK(cmxgcr_lock); EXPORT_SYMBOL(cmxgcr_lock); -/* QE snum state */ -enum qe_snum_state { - QE_SNUM_STATE_USED, - QE_SNUM_STATE_FREE -}; - -/* QE snum */ -struct qe_snum { - u8 num; - enum qe_snum_state state; -}; - /* We allocate this here because it is used almost exclusively for * the communication processor devices. */ struct qe_immap __iomem *qe_immr; EXPORT_SYMBOL(qe_immr); -static struct qe_snum snums[QE_NUM_OF_SNUM]; /* Dynamically allocated SNUMs */ +static u8 snums[QE_NUM_OF_SNUM]; /* Dynamically allocated SNUMs */ +static DECLARE_BITMAP(snum_state, QE_NUM_OF_SNUM); static unsigned int qe_num_of_snum; static phys_addr_t qebase = -1; +static struct device_node *qe_get_device_node(void) +{ + struct device_node *qe; + + /* + * Newer device trees have an "fsl,qe" compatible property for the QE + * node, but we still need to support older device trees. + */ + qe = of_find_compatible_node(NULL, NULL, "fsl,qe"); + if (qe) + return qe; + return of_find_node_by_type(NULL, "qe"); +} + static phys_addr_t get_qe_base(void) { struct device_node *qe; @@ -71,12 +75,9 @@ static phys_addr_t get_qe_base(void) if (qebase != -1) return qebase; - qe = of_find_compatible_node(NULL, NULL, "fsl,qe"); - if (!qe) { - qe = of_find_node_by_type(NULL, "qe"); - if (!qe) - return qebase; - } + qe = qe_get_device_node(); + if (!qe) + return qebase; ret = of_address_to_resource(qe, 0, &res); if (!ret) @@ -170,12 +171,9 @@ unsigned int qe_get_brg_clk(void) if (brg_clk) return brg_clk; - qe = of_find_compatible_node(NULL, NULL, "fsl,qe"); - if (!qe) { - qe = of_find_node_by_type(NULL, "qe"); - if (!qe) - return brg_clk; - } + qe = qe_get_device_node(); + if (!qe) + return brg_clk; prop = of_get_property(qe, "brg-frequency", &size); if (prop && size == sizeof(*prop)) @@ -281,7 +279,6 @@ EXPORT_SYMBOL(qe_clock_source); */ static void qe_snums_init(void) { - int i; static const u8 snum_init_76[] = { 0x04, 0x05, 0x0C, 0x0D, 0x14, 0x15, 0x1C, 0x1D, 0x24, 0x25, 0x2C, 0x2D, 0x34, 0x35, 0x88, 0x89, @@ -302,19 +299,39 @@ static void qe_snums_init(void) 0x28, 0x29, 0x38, 0x39, 0x48, 0x49, 0x58, 0x59, 0x68, 0x69, 0x78, 0x79, 0x80, 0x81, }; - static const u8 *snum_init; + struct device_node *qe; + const u8 *snum_init; + int i; - qe_num_of_snum = qe_get_num_of_snums(); + bitmap_zero(snum_state, QE_NUM_OF_SNUM); + qe_num_of_snum = 28; /* The default number of snum for threads is 28 */ + qe = qe_get_device_node(); + if (qe) { + i = of_property_read_variable_u8_array(qe, "fsl,qe-snums", + snums, 1, QE_NUM_OF_SNUM); + if (i > 0) { + of_node_put(qe); + qe_num_of_snum = i; + return; + } + /* + * Fall back to legacy binding of using the value of + * fsl,qe-num-snums to choose one of the static arrays + * above. + */ + of_property_read_u32(qe, "fsl,qe-num-snums", &qe_num_of_snum); + of_node_put(qe); + } - if (qe_num_of_snum == 76) + if (qe_num_of_snum == 76) { snum_init = snum_init_76; - else + } else if (qe_num_of_snum == 28 || qe_num_of_snum == 46) { snum_init = snum_init_46; - - for (i = 0; i < qe_num_of_snum; i++) { - snums[i].num = snum_init[i]; - snums[i].state = QE_SNUM_STATE_FREE; + } else { + pr_err("QE: unsupported value of fsl,qe-num-snums: %u\n", qe_num_of_snum); + return; } + memcpy(snums, snum_init, qe_num_of_snum); } int qe_get_snum(void) @@ -324,12 +341,10 @@ int qe_get_snum(void) int i; spin_lock_irqsave(&qe_lock, flags); - for (i = 0; i < qe_num_of_snum; i++) { - if (snums[i].state == QE_SNUM_STATE_FREE) { - snums[i].state = QE_SNUM_STATE_USED; - snum = snums[i].num; - break; - } + i = find_first_zero_bit(snum_state, qe_num_of_snum); + if (i < qe_num_of_snum) { + set_bit(i, snum_state); + snum = snums[i]; } spin_unlock_irqrestore(&qe_lock, flags); @@ -339,14 +354,10 @@ EXPORT_SYMBOL(qe_get_snum); void qe_put_snum(u8 snum) { - int i; + const u8 *p = memchr(snums, snum, qe_num_of_snum); - for (i = 0; i < qe_num_of_snum; i++) { - if (snums[i].num == snum) { - snums[i].state = QE_SNUM_STATE_FREE; - break; - } - } + if (p) + clear_bit(p - snums, snum_state); } EXPORT_SYMBOL(qe_put_snum); @@ -572,16 +583,9 @@ struct qe_firmware_info *qe_get_firmware_info(void) initialized = 1; - /* - * Newer device trees have an "fsl,qe" compatible property for the QE - * node, but we still need to support older device trees. - */ - qe = of_find_compatible_node(NULL, NULL, "fsl,qe"); - if (!qe) { - qe = of_find_node_by_type(NULL, "qe"); - if (!qe) - return NULL; - } + qe = qe_get_device_node(); + if (!qe) + return NULL; /* Find the 'firmware' child node */ fw = of_get_child_by_name(qe, "firmware"); @@ -627,16 +631,9 @@ unsigned int qe_get_num_of_risc(void) unsigned int num_of_risc = 0; const u32 *prop; - qe = of_find_compatible_node(NULL, NULL, "fsl,qe"); - if (!qe) { - /* Older devices trees did not have an "fsl,qe" - * compatible property, so we need to look for - * the QE node by name. - */ - qe = of_find_node_by_type(NULL, "qe"); - if (!qe) - return num_of_risc; - } + qe = qe_get_device_node(); + if (!qe) + return num_of_risc; prop = of_get_property(qe, "fsl,qe-num-riscs", &size); if (prop && size == sizeof(*prop)) @@ -650,37 +647,7 @@ EXPORT_SYMBOL(qe_get_num_of_risc); unsigned int qe_get_num_of_snums(void) { - struct device_node *qe; - int size; - unsigned int num_of_snums; - const u32 *prop; - - num_of_snums = 28; /* The default number of snum for threads is 28 */ - qe = of_find_compatible_node(NULL, NULL, "fsl,qe"); - if (!qe) { - /* Older devices trees did not have an "fsl,qe" - * compatible property, so we need to look for - * the QE node by name. - */ - qe = of_find_node_by_type(NULL, "qe"); - if (!qe) - return num_of_snums; - } - - prop = of_get_property(qe, "fsl,qe-num-snums", &size); - if (prop && size == sizeof(*prop)) { - num_of_snums = *prop; - if ((num_of_snums < 28) || (num_of_snums > QE_NUM_OF_SNUM)) { - /* No QE ever has fewer than 28 SNUMs */ - pr_err("QE: number of snum is invalid\n"); - of_node_put(qe); - return -EINVAL; - } - } - - of_node_put(qe); - - return num_of_snums; + return qe_num_of_snum; } EXPORT_SYMBOL(qe_get_num_of_snums); diff --git a/drivers/soc/renesas/rcar-sysc.c b/drivers/soc/renesas/rcar-sysc.c index 0c80fab4f8de..02b29ea62dc4 100644 --- a/drivers/soc/renesas/rcar-sysc.c +++ b/drivers/soc/renesas/rcar-sysc.c @@ -170,7 +170,7 @@ struct rcar_sysc_pd { struct generic_pm_domain genpd; struct rcar_sysc_ch ch; unsigned int flags; - char name[0]; + char name[]; }; static inline struct rcar_sysc_pd *to_rcar_pd(struct generic_pm_domain *d) diff --git a/include/dt-bindings/bus/moxtet.h b/include/dt-bindings/bus/moxtet.h new file mode 100644 index 000000000000..dc9345440ebe --- /dev/null +++ b/include/dt-bindings/bus/moxtet.h @@ -0,0 +1,16 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Constant for device tree bindings for Turris Mox module configuration bus + * + * Copyright (C) 2019 Marek Behun <marek.behun@nic.cz> + */ + +#ifndef _DT_BINDINGS_BUS_MOXTET_H +#define _DT_BINDINGS_BUS_MOXTET_H + +#define MOXTET_IRQ_PCI 0 +#define MOXTET_IRQ_USB3 4 +#define MOXTET_IRQ_PERIDOT(n) (8 + (n)) +#define MOXTET_IRQ_TOPAZ 12 + +#endif /* _DT_BINDINGS_BUS_MOXTET_H */ diff --git a/include/dt-bindings/reset/amlogic,meson-gxbb-reset.h b/include/dt-bindings/reset/amlogic,meson-gxbb-reset.h index 524d6077ac1b..ea5058618863 100644 --- a/include/dt-bindings/reset/amlogic,meson-gxbb-reset.h +++ b/include/dt-bindings/reset/amlogic,meson-gxbb-reset.h @@ -1,56 +1,7 @@ +/* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */ /* - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * * Copyright (c) 2016 BayLibre, SAS. * Author: Neil Armstrong <narmstrong@baylibre.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see <http://www.gnu.org/licenses/>. - * The full GNU General Public License is included in this distribution - * in the file called COPYING. - * - * BSD LICENSE - * - * Copyright (c) 2016 BayLibre, SAS. - * Author: Neil Armstrong <narmstrong@baylibre.com> - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #ifndef _DT_BINDINGS_AMLOGIC_MESON_GXBB_RESET_H #define _DT_BINDINGS_AMLOGIC_MESON_GXBB_RESET_H diff --git a/include/dt-bindings/reset/amlogic,meson8b-reset.h b/include/dt-bindings/reset/amlogic,meson8b-reset.h index 614aff2c7aff..c614438bcbdb 100644 --- a/include/dt-bindings/reset/amlogic,meson8b-reset.h +++ b/include/dt-bindings/reset/amlogic,meson8b-reset.h @@ -1,56 +1,7 @@ +/* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */ /* - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * * Copyright (c) 2016 BayLibre, SAS. * Author: Neil Armstrong <narmstrong@baylibre.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see <http://www.gnu.org/licenses/>. - * The full GNU General Public License is included in this distribution - * in the file called COPYING. - * - * BSD LICENSE - * - * Copyright (c) 2016 BayLibre, SAS. - * Author: Neil Armstrong <narmstrong@baylibre.com> - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #ifndef _DT_BINDINGS_AMLOGIC_MESON8B_RESET_H #define _DT_BINDINGS_AMLOGIC_MESON8B_RESET_H diff --git a/include/dt-bindings/reset/imx8mq-reset.h b/include/dt-bindings/reset/imx8mq-reset.h index 57c592498aa0..9a301082d361 100644 --- a/include/dt-bindings/reset/imx8mq-reset.h +++ b/include/dt-bindings/reset/imx8mq-reset.h @@ -31,33 +31,33 @@ #define IMX8MQ_RESET_OTG2_PHY_RESET 20 #define IMX8MQ_RESET_MIPI_DSI_RESET_BYTE_N 21 #define IMX8MQ_RESET_MIPI_DSI_RESET_N 22 -#define IMX8MQ_RESET_MIPI_DIS_DPI_RESET_N 23 -#define IMX8MQ_RESET_MIPI_DIS_ESC_RESET_N 24 -#define IMX8MQ_RESET_MIPI_DIS_PCLK_RESET_N 25 +#define IMX8MQ_RESET_MIPI_DSI_DPI_RESET_N 23 +#define IMX8MQ_RESET_MIPI_DSI_ESC_RESET_N 24 +#define IMX8MQ_RESET_MIPI_DSI_PCLK_RESET_N 25 #define IMX8MQ_RESET_PCIEPHY 26 #define IMX8MQ_RESET_PCIEPHY_PERST 27 #define IMX8MQ_RESET_PCIE_CTRL_APPS_EN 28 #define IMX8MQ_RESET_PCIE_CTRL_APPS_TURNOFF 29 -#define IMX8MQ_RESET_HDMI_PHY_APB_RESET 30 +#define IMX8MQ_RESET_HDMI_PHY_APB_RESET 30 /* i.MX8MM does NOT support */ #define IMX8MQ_RESET_DISP_RESET 31 #define IMX8MQ_RESET_GPU_RESET 32 #define IMX8MQ_RESET_VPU_RESET 33 -#define IMX8MQ_RESET_PCIEPHY2 34 -#define IMX8MQ_RESET_PCIEPHY2_PERST 35 -#define IMX8MQ_RESET_PCIE2_CTRL_APPS_EN 36 -#define IMX8MQ_RESET_PCIE2_CTRL_APPS_TURNOFF 37 -#define IMX8MQ_RESET_MIPI_CSI1_CORE_RESET 38 -#define IMX8MQ_RESET_MIPI_CSI1_PHY_REF_RESET 39 -#define IMX8MQ_RESET_MIPI_CSI1_ESC_RESET 40 -#define IMX8MQ_RESET_MIPI_CSI2_CORE_RESET 41 -#define IMX8MQ_RESET_MIPI_CSI2_PHY_REF_RESET 42 -#define IMX8MQ_RESET_MIPI_CSI2_ESC_RESET 43 +#define IMX8MQ_RESET_PCIEPHY2 34 /* i.MX8MM does NOT support */ +#define IMX8MQ_RESET_PCIEPHY2_PERST 35 /* i.MX8MM does NOT support */ +#define IMX8MQ_RESET_PCIE2_CTRL_APPS_EN 36 /* i.MX8MM does NOT support */ +#define IMX8MQ_RESET_PCIE2_CTRL_APPS_TURNOFF 37 /* i.MX8MM does NOT support */ +#define IMX8MQ_RESET_MIPI_CSI1_CORE_RESET 38 /* i.MX8MM does NOT support */ +#define IMX8MQ_RESET_MIPI_CSI1_PHY_REF_RESET 39 /* i.MX8MM does NOT support */ +#define IMX8MQ_RESET_MIPI_CSI1_ESC_RESET 40 /* i.MX8MM does NOT support */ +#define IMX8MQ_RESET_MIPI_CSI2_CORE_RESET 41 /* i.MX8MM does NOT support */ +#define IMX8MQ_RESET_MIPI_CSI2_PHY_REF_RESET 42 /* i.MX8MM does NOT support */ +#define IMX8MQ_RESET_MIPI_CSI2_ESC_RESET 43 /* i.MX8MM does NOT support */ #define IMX8MQ_RESET_DDRC1_PRST 44 #define IMX8MQ_RESET_DDRC1_CORE_RESET 45 #define IMX8MQ_RESET_DDRC1_PHY_RESET 46 -#define IMX8MQ_RESET_DDRC2_PRST 47 -#define IMX8MQ_RESET_DDRC2_CORE_RESET 48 -#define IMX8MQ_RESET_DDRC2_PHY_RESET 49 +#define IMX8MQ_RESET_DDRC2_PRST 47 /* i.MX8MM does NOT support */ +#define IMX8MQ_RESET_DDRC2_CORE_RESET 48 /* i.MX8MM does NOT support */ +#define IMX8MQ_RESET_DDRC2_PHY_RESET 49 /* i.MX8MM does NOT support */ #define IMX8MQ_RESET_NUM 50 diff --git a/include/linux/moxtet.h b/include/linux/moxtet.h new file mode 100644 index 000000000000..490db6886dcc --- /dev/null +++ b/include/linux/moxtet.h @@ -0,0 +1,109 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Turris Mox module configuration bus driver + * + * Copyright (C) 2019 Marek Behun <marek.behun@nic.cz> + */ + +#ifndef __LINUX_MOXTET_H +#define __LINUX_MOXTET_H + +#include <linux/device.h> +#include <linux/irq.h> +#include <linux/irqdomain.h> +#include <linux/mutex.h> + +#define TURRIS_MOX_MAX_MODULES 10 + +enum turris_mox_cpu_module_id { + TURRIS_MOX_CPU_ID_EMMC = 0x00, + TURRIS_MOX_CPU_ID_SD = 0x10, +}; + +enum turris_mox_module_id { + TURRIS_MOX_MODULE_FIRST = 0x01, + + TURRIS_MOX_MODULE_SFP = 0x01, + TURRIS_MOX_MODULE_PCI = 0x02, + TURRIS_MOX_MODULE_TOPAZ = 0x03, + TURRIS_MOX_MODULE_PERIDOT = 0x04, + TURRIS_MOX_MODULE_USB3 = 0x05, + TURRIS_MOX_MODULE_PCI_BRIDGE = 0x06, + + TURRIS_MOX_MODULE_LAST = 0x06, +}; + +#define MOXTET_NIRQS 16 + +extern struct bus_type moxtet_type; + +struct moxtet { + struct device *dev; + struct mutex lock; + u8 modules[TURRIS_MOX_MAX_MODULES]; + int count; + u8 tx[TURRIS_MOX_MAX_MODULES]; + int dev_irq; + struct { + struct irq_domain *domain; + struct irq_chip chip; + unsigned long masked, exists; + struct moxtet_irqpos { + u8 idx; + u8 bit; + } position[MOXTET_NIRQS]; + } irq; +#ifdef CONFIG_DEBUG_FS + struct dentry *debugfs_root; +#endif +}; + +struct moxtet_driver { + const enum turris_mox_module_id *id_table; + struct device_driver driver; +}; + +static inline struct moxtet_driver * +to_moxtet_driver(struct device_driver *drv) +{ + if (!drv) + return NULL; + return container_of(drv, struct moxtet_driver, driver); +} + +extern int __moxtet_register_driver(struct module *owner, + struct moxtet_driver *mdrv); + +static inline void moxtet_unregister_driver(struct moxtet_driver *mdrv) +{ + if (mdrv) + driver_unregister(&mdrv->driver); +} + +#define moxtet_register_driver(driver) \ + __moxtet_register_driver(THIS_MODULE, driver) + +#define module_moxtet_driver(__moxtet_driver) \ + module_driver(__moxtet_driver, moxtet_register_driver, \ + moxtet_unregister_driver) + +struct moxtet_device { + struct device dev; + struct moxtet *moxtet; + enum turris_mox_module_id id; + unsigned int idx; +}; + +extern int moxtet_device_read(struct device *dev); +extern int moxtet_device_write(struct device *dev, u8 val); +extern int moxtet_device_written(struct device *dev); + +static inline struct moxtet_device * +to_moxtet_device(struct device *dev) +{ + if (!dev) + return NULL; + return container_of(dev, struct moxtet_device, dev); +} + +#endif /* __LINUX_MOXTET_H */ |