diff options
Diffstat (limited to 'Documentation/devicetree/bindings/arm')
-rw-r--r-- | Documentation/devicetree/bindings/arm/amlogic.yaml | 21 | ||||
-rw-r--r-- | Documentation/devicetree/bindings/arm/arm,scmi.txt | 17 | ||||
-rw-r--r-- | Documentation/devicetree/bindings/arm/cpus.yaml | 1 | ||||
-rw-r--r-- | Documentation/devicetree/bindings/arm/fsl.yaml | 26 | ||||
-rw-r--r-- | Documentation/devicetree/bindings/arm/mediatek.yaml | 4 | ||||
-rw-r--r-- | Documentation/devicetree/bindings/arm/qcom.yaml | 8 | ||||
-rw-r--r-- | Documentation/devicetree/bindings/arm/rockchip.yaml | 45 | ||||
-rw-r--r-- | Documentation/devicetree/bindings/arm/sunxi.yaml | 16 | ||||
-rw-r--r-- | Documentation/devicetree/bindings/arm/topology.txt | 475 |
9 files changed, 130 insertions, 483 deletions
diff --git a/Documentation/devicetree/bindings/arm/amlogic.yaml b/Documentation/devicetree/bindings/arm/amlogic.yaml index 325c6fd3566d..99015cef8bb1 100644 --- a/Documentation/devicetree/bindings/arm/amlogic.yaml +++ b/Documentation/devicetree/bindings/arm/amlogic.yaml @@ -91,13 +91,11 @@ properties: - description: Boards with the Amlogic Meson GXL S905X SoC items: - enum: - - amediatech,x96-max - amlogic,p212 - hwacom,amazetv - khadas,vim - libretech,cc - nexbox,a95x - - seirobotics,sei510 - const: amlogic,s905x - const: amlogic,meson-gxl @@ -129,16 +127,33 @@ properties: - const: amlogic,a113d - const: amlogic,meson-axg - - description: Boards with the Amlogic Meson G12A S905D2 SoC + - description: Boards with the Amlogic Meson G12A S905D2/X2/Y2 SoC items: - enum: + - amediatech,x96-max - amlogic,u200 + - seirobotics,sei510 - const: amlogic,g12a + - description: Boards with the Amlogic Meson G12B A311D SoC + items: + - enum: + - khadas,vim3 + - const: amlogic,a311d + - const: amlogic,g12b + - description: Boards with the Amlogic Meson G12B S922X SoC items: - enum: - hardkernel,odroid-n2 + - khadas,vim3 + - const: amlogic,s922x - const: amlogic,g12b + - description: Boards with the Amlogic Meson SM1 S905X3/D3/Y3 SoC + items: + - enum: + - seirobotics,sei610 + - khadas,vim3l + - const: amlogic,sm1 ... diff --git a/Documentation/devicetree/bindings/arm/arm,scmi.txt b/Documentation/devicetree/bindings/arm/arm,scmi.txt index 317a2fc3667a..083dbf96ee00 100644 --- a/Documentation/devicetree/bindings/arm/arm,scmi.txt +++ b/Documentation/devicetree/bindings/arm/arm,scmi.txt @@ -73,6 +73,16 @@ Required properties: as used by the firmware. Refer to platform details for your implementation for the IDs to use. +Reset signal bindings for the reset domains based on SCMI Message Protocol +------------------------------------------------------------ + +This binding for the SCMI reset domain providers uses the generic reset +signal binding[5]. + +Required properties: + - #reset-cells : Should be 1. Contains the reset domain ID value used + by SCMI commands. + SRAM and Shared Memory for SCMI ------------------------------- @@ -93,6 +103,7 @@ Required sub-node properties: [2] Documentation/devicetree/bindings/power/power_domain.txt [3] Documentation/devicetree/bindings/thermal/thermal.txt [4] Documentation/devicetree/bindings/sram/sram.txt +[5] Documentation/devicetree/bindings/reset/reset.txt Example: @@ -152,6 +163,11 @@ firmware { reg = <0x15>; #thermal-sensor-cells = <1>; }; + + scmi_reset: protocol@16 { + reg = <0x16>; + #reset-cells = <1>; + }; }; }; @@ -166,6 +182,7 @@ hdlcd@7ff60000 { reg = <0 0x7ff60000 0 0x1000>; clocks = <&scmi_clk 4>; power-domains = <&scmi_devpd 1>; + resets = <&scmi_reset 10>; }; thermal-zones { diff --git a/Documentation/devicetree/bindings/arm/cpus.yaml b/Documentation/devicetree/bindings/arm/cpus.yaml index aa40b074b864..727e0ffc702b 100644 --- a/Documentation/devicetree/bindings/arm/cpus.yaml +++ b/Documentation/devicetree/bindings/arm/cpus.yaml @@ -175,6 +175,7 @@ properties: - amlogic,meson8-smp - amlogic,meson8b-smp - arm,realview-smp + - aspeed,ast2600-smp - brcm,bcm11351-cpu-method - brcm,bcm23550 - brcm,bcm2836-smp diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml index 7294ac36f4c0..1b4b4e6573b5 100644 --- a/Documentation/devicetree/bindings/arm/fsl.yaml +++ b/Documentation/devicetree/bindings/arm/fsl.yaml @@ -161,6 +161,20 @@ properties: items: - enum: - fsl,imx6ul-14x14-evk # i.MX6 UltraLite 14x14 EVK Board + - kontron,imx6ul-n6310-som # Kontron N6310 SOM + - const: fsl,imx6ul + + - description: Kontron N6310 S Board + items: + - const: kontron,imx6ul-n6310-s + - const: kontron,imx6ul-n6310-som + - const: fsl,imx6ul + + - description: Kontron N6310 S 43 Board + items: + - const: kontron,imx6ul-n6310-s-43 + - const: kontron,imx6ul-n6310-s + - const: kontron,imx6ul-n6310-som - const: fsl,imx6ul - description: i.MX6ULL based Boards @@ -188,6 +202,7 @@ properties: - fsl,imx7d-sdb # i.MX7 SabreSD Board - novtech,imx7d-meerkat96 # i.MX7 Meerkat96 Board - tq,imx7d-mba7 # i.MX7D TQ MBa7 with TQMa7D SoM + - zii,imx7d-rmu2 # ZII RMU2 Board - zii,imx7d-rpu2 # ZII RPU2 Board - const: fsl,imx7d @@ -214,16 +229,26 @@ properties: - fsl,imx8mm-evk # i.MX8MM EVK Board - const: fsl,imx8mm + - description: i.MX8MN based Boards + items: + - enum: + - fsl,imx8mn-ddr4-evk # i.MX8MN DDR4 EVK Board + - const: fsl,imx8mn + - description: i.MX8MQ based Boards items: - enum: + - boundary,imx8mq-nitrogen8m # i.MX8MQ NITROGEN Board - fsl,imx8mq-evk # i.MX8MQ EVK Board - purism,librem5-devkit # Purism Librem5 devkit + - solidrun,hummingboard-pulse # SolidRun Hummingboard Pulse + - technexion,pico-pi-imx8m # TechNexion PICO-PI-8M evk - const: fsl,imx8mq - description: i.MX8QXP based Boards items: - enum: + - einfochips,imx8qxp-ai_ml # i.MX8QXP AI_ML Board - fsl,imx8qxp-mek # i.MX8QXP MEK Board - const: fsl,imx8qxp @@ -283,6 +308,7 @@ properties: - description: LS1046A based Boards items: - enum: + - fsl,ls1046a-frwy - fsl,ls1046a-qds - fsl,ls1046a-rdb - const: fsl,ls1046a diff --git a/Documentation/devicetree/bindings/arm/mediatek.yaml b/Documentation/devicetree/bindings/arm/mediatek.yaml index a4ad2eb926f9..4043c5046441 100644 --- a/Documentation/devicetree/bindings/arm/mediatek.yaml +++ b/Documentation/devicetree/bindings/arm/mediatek.yaml @@ -48,6 +48,10 @@ properties: - const: mediatek,mt6765 - items: - enum: + - mediatek,mt6779-evb + - const: mediatek,mt6779 + - items: + - enum: - mediatek,mt6795-evb - const: mediatek,mt6795 - items: diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml index 54ef6b6b9189..e39d8f02e33c 100644 --- a/Documentation/devicetree/bindings/arm/qcom.yaml +++ b/Documentation/devicetree/bindings/arm/qcom.yaml @@ -45,6 +45,7 @@ description: | mtp sbc hk01 + qrd The 'soc_version' and 'board_version' elements take the form of v<Major>.<Minor> where the minor number may be omitted when it's zero, i.e. v1.0 is the same @@ -116,6 +117,13 @@ properties: - const: qcom,msm8916 - items: + - enum: + - longcheer,l8150 + - samsung,a3u-eur + - samsung,a5u-eur + - const: qcom,msm8916 + + - items: - const: qcom,msm8996-mtp - items: diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml index 34865042f4e4..c82c5e57d44c 100644 --- a/Documentation/devicetree/bindings/arm/rockchip.yaml +++ b/Documentation/devicetree/bindings/arm/rockchip.yaml @@ -128,6 +128,21 @@ properties: - const: google,veyron - const: rockchip,rk3288 + - description: Google Fievel (AOPEN Chromebox Mini) + items: + - const: google,veyron-fievel-rev8 + - const: google,veyron-fievel-rev7 + - const: google,veyron-fievel-rev6 + - const: google,veyron-fievel-rev5 + - const: google,veyron-fievel-rev4 + - const: google,veyron-fievel-rev3 + - const: google,veyron-fievel-rev2 + - const: google,veyron-fievel-rev1 + - const: google,veyron-fievel-rev0 + - const: google,veyron-fievel + - const: google,veyron + - const: rockchip,rk3288 + - description: Google Gru (dev-board) items: - const: google,gru-rev15 @@ -311,6 +326,21 @@ properties: - const: google,veyron - const: rockchip,rk3288 + - description: Google Tiger (AOpen Chromebase Mini) + items: + - const: google,veyron-tiger-rev8 + - const: google,veyron-tiger-rev7 + - const: google,veyron-tiger-rev6 + - const: google,veyron-tiger-rev5 + - const: google,veyron-tiger-rev4 + - const: google,veyron-tiger-rev3 + - const: google,veyron-tiger-rev2 + - const: google,veyron-tiger-rev1 + - const: google,veyron-tiger-rev0 + - const: google,veyron-tiger + - const: google,veyron + - const: rockchip,rk3288 + - description: Haoyu MarsBoard RK3066 items: - const: haoyu,marsboard-rk3066 @@ -329,6 +359,16 @@ properties: - khadas,edge-v - const: rockchip,rk3399 + - description: Mecer Xtreme Mini S6 + items: + - const: mecer,xms6 + - const: rockchip,rk3229 + + - description: Leez RK3399 P710 + items: + - const: leez,p710 + - const: rockchip,rk3399 + - description: mqmaker MiQi items: - const: mqmaker,miqi @@ -424,11 +464,6 @@ properties: - rockchip,rk3288-evb-rk808 - const: rockchip,rk3288 - - description: Rockchip RK3288 Fennec - items: - - const: rockchip,rk3288-fennec - - const: rockchip,rk3288 - - description: Rockchip RK3328 Evaluation board items: - const: rockchip,rk3328-evb diff --git a/Documentation/devicetree/bindings/arm/sunxi.yaml b/Documentation/devicetree/bindings/arm/sunxi.yaml index 000a00d12d6a..972b1e9ee804 100644 --- a/Documentation/devicetree/bindings/arm/sunxi.yaml +++ b/Documentation/devicetree/bindings/arm/sunxi.yaml @@ -353,6 +353,12 @@ properties: - const: licheepi,licheepi-zero - const: allwinner,sun8i-v3s + - description: Lichee Zero Plus (with S3, without eMMC/SPI Flash) + items: + - const: sipeed,lichee-zero-plus + - const: sochip,s3 + - const: allwinner,sun8i-v3 + - description: Linksprite PCDuino items: - const: linksprite,a10-pcduino @@ -568,6 +574,11 @@ properties: - const: olimex,a64-olinuxino - const: allwinner,sun50i-a64 + - description: Olimex A64-OlinuXino (with eMMC) + items: + - const: olimex,a64-olinuxino-emmc + - const: allwinner,sun50i-a64 + - description: Olimex A64 Teres-I items: - const: olimex,a64-teres-i @@ -671,6 +682,11 @@ properties: - const: sinlinx,sina33 - const: allwinner,sun8i-a33 + - description: Tanix TX6 + items: + - const: oranth,tanix-tx6 + - const: allwinner,sun50i-h6 + - description: TBS A711 Tablet items: - const: tbs-biometrics,a711 diff --git a/Documentation/devicetree/bindings/arm/topology.txt b/Documentation/devicetree/bindings/arm/topology.txt deleted file mode 100644 index b0d80c0fb265..000000000000 --- a/Documentation/devicetree/bindings/arm/topology.txt +++ /dev/null @@ -1,475 +0,0 @@ -=========================================== -ARM topology binding description -=========================================== - -=========================================== -1 - Introduction -=========================================== - -In an ARM system, the hierarchy of CPUs is defined through three entities that -are used to describe the layout of physical CPUs in the system: - -- cluster -- core -- thread - -The cpu nodes (bindings defined in [1]) represent the devices that -correspond to physical CPUs and are to be mapped to the hierarchy levels. - -The bottom hierarchy level sits at core or thread level depending on whether -symmetric multi-threading (SMT) is supported or not. - -For instance in a system where CPUs support SMT, "cpu" nodes represent all -threads existing in the system and map to the hierarchy level "thread" above. -In systems where SMT is not supported "cpu" nodes represent all cores present -in the system and map to the hierarchy level "core" above. - -ARM topology bindings allow one to associate cpu nodes with hierarchical groups -corresponding to the system hierarchy; syntactically they are defined as device -tree nodes. - -The remainder of this document provides the topology bindings for ARM, based -on the Devicetree Specification, available from: - -https://www.devicetree.org/specifications/ - -If not stated otherwise, whenever a reference to a cpu node phandle is made its -value must point to a cpu node compliant with the cpu node bindings as -documented in [1]. -A topology description containing phandles to cpu nodes that are not compliant -with bindings standardized in [1] is therefore considered invalid. - -=========================================== -2 - cpu-map node -=========================================== - -The ARM CPU topology is defined within the cpu-map node, which is a direct -child of the cpus node and provides a container where the actual topology -nodes are listed. - -- cpu-map node - - Usage: Optional - On ARM SMP systems provide CPUs topology to the OS. - ARM uniprocessor systems do not require a topology - description and therefore should not define a - cpu-map node. - - Description: The cpu-map node is just a container node where its - subnodes describe the CPU topology. - - Node name must be "cpu-map". - - The cpu-map node's parent node must be the cpus node. - - The cpu-map node's child nodes can be: - - - one or more cluster nodes - - Any other configuration is considered invalid. - -The cpu-map node can only contain three types of child nodes: - -- cluster node -- core node -- thread node - -whose bindings are described in paragraph 3. - -The nodes describing the CPU topology (cluster/core/thread) can only -be defined within the cpu-map node and every core/thread in the system -must be defined within the topology. Any other configuration is -invalid and therefore must be ignored. - -=========================================== -2.1 - cpu-map child nodes naming convention -=========================================== - -cpu-map child nodes must follow a naming convention where the node name -must be "clusterN", "coreN", "threadN" depending on the node type (ie -cluster/core/thread) (where N = {0, 1, ...} is the node number; nodes which -are siblings within a single common parent node must be given a unique and -sequential N value, starting from 0). -cpu-map child nodes which do not share a common parent node can have the same -name (ie same number N as other cpu-map child nodes at different device tree -levels) since name uniqueness will be guaranteed by the device tree hierarchy. - -=========================================== -3 - cluster/core/thread node bindings -=========================================== - -Bindings for cluster/cpu/thread nodes are defined as follows: - -- cluster node - - Description: must be declared within a cpu-map node, one node - per cluster. A system can contain several layers of - clustering and cluster nodes can be contained in parent - cluster nodes. - - The cluster node name must be "clusterN" as described in 2.1 above. - A cluster node can not be a leaf node. - - A cluster node's child nodes must be: - - - one or more cluster nodes; or - - one or more core nodes - - Any other configuration is considered invalid. - -- core node - - Description: must be declared in a cluster node, one node per core in - the cluster. If the system does not support SMT, core - nodes are leaf nodes, otherwise they become containers of - thread nodes. - - The core node name must be "coreN" as described in 2.1 above. - - A core node must be a leaf node if SMT is not supported. - - Properties for core nodes that are leaf nodes: - - - cpu - Usage: required - Value type: <phandle> - Definition: a phandle to the cpu node that corresponds to the - core node. - - If a core node is not a leaf node (CPUs supporting SMT) a core node's - child nodes can be: - - - one or more thread nodes - - Any other configuration is considered invalid. - -- thread node - - Description: must be declared in a core node, one node per thread - in the core if the system supports SMT. Thread nodes are - always leaf nodes in the device tree. - - The thread node name must be "threadN" as described in 2.1 above. - - A thread node must be a leaf node. - - A thread node must contain the following property: - - - cpu - Usage: required - Value type: <phandle> - Definition: a phandle to the cpu node that corresponds to - the thread node. - -=========================================== -4 - Example dts -=========================================== - -Example 1 (ARM 64-bit, 16-cpu system, two clusters of clusters): - -cpus { - #size-cells = <0>; - #address-cells = <2>; - - cpu-map { - cluster0 { - cluster0 { - core0 { - thread0 { - cpu = <&CPU0>; - }; - thread1 { - cpu = <&CPU1>; - }; - }; - - core1 { - thread0 { - cpu = <&CPU2>; - }; - thread1 { - cpu = <&CPU3>; - }; - }; - }; - - cluster1 { - core0 { - thread0 { - cpu = <&CPU4>; - }; - thread1 { - cpu = <&CPU5>; - }; - }; - - core1 { - thread0 { - cpu = <&CPU6>; - }; - thread1 { - cpu = <&CPU7>; - }; - }; - }; - }; - - cluster1 { - cluster0 { - core0 { - thread0 { - cpu = <&CPU8>; - }; - thread1 { - cpu = <&CPU9>; - }; - }; - core1 { - thread0 { - cpu = <&CPU10>; - }; - thread1 { - cpu = <&CPU11>; - }; - }; - }; - - cluster1 { - core0 { - thread0 { - cpu = <&CPU12>; - }; - thread1 { - cpu = <&CPU13>; - }; - }; - core1 { - thread0 { - cpu = <&CPU14>; - }; - thread1 { - cpu = <&CPU15>; - }; - }; - }; - }; - }; - - CPU0: cpu@0 { - device_type = "cpu"; - compatible = "arm,cortex-a57"; - reg = <0x0 0x0>; - enable-method = "spin-table"; - cpu-release-addr = <0 0x20000000>; - }; - - CPU1: cpu@1 { - device_type = "cpu"; - compatible = "arm,cortex-a57"; - reg = <0x0 0x1>; - enable-method = "spin-table"; - cpu-release-addr = <0 0x20000000>; - }; - - CPU2: cpu@100 { - device_type = "cpu"; - compatible = "arm,cortex-a57"; - reg = <0x0 0x100>; - enable-method = "spin-table"; - cpu-release-addr = <0 0x20000000>; - }; - - CPU3: cpu@101 { - device_type = "cpu"; - compatible = "arm,cortex-a57"; - reg = <0x0 0x101>; - enable-method = "spin-table"; - cpu-release-addr = <0 0x20000000>; - }; - - CPU4: cpu@10000 { - device_type = "cpu"; - compatible = "arm,cortex-a57"; - reg = <0x0 0x10000>; - enable-method = "spin-table"; - cpu-release-addr = <0 0x20000000>; - }; - - CPU5: cpu@10001 { - device_type = "cpu"; - compatible = "arm,cortex-a57"; - reg = <0x0 0x10001>; - enable-method = "spin-table"; - cpu-release-addr = <0 0x20000000>; - }; - - CPU6: cpu@10100 { - device_type = "cpu"; - compatible = "arm,cortex-a57"; - reg = <0x0 0x10100>; - enable-method = "spin-table"; - cpu-release-addr = <0 0x20000000>; - }; - - CPU7: cpu@10101 { - device_type = "cpu"; - compatible = "arm,cortex-a57"; - reg = <0x0 0x10101>; - enable-method = "spin-table"; - cpu-release-addr = <0 0x20000000>; - }; - - CPU8: cpu@100000000 { - device_type = "cpu"; - compatible = "arm,cortex-a57"; - reg = <0x1 0x0>; - enable-method = "spin-table"; - cpu-release-addr = <0 0x20000000>; - }; - - CPU9: cpu@100000001 { - device_type = "cpu"; - compatible = "arm,cortex-a57"; - reg = <0x1 0x1>; - enable-method = "spin-table"; - cpu-release-addr = <0 0x20000000>; - }; - - CPU10: cpu@100000100 { - device_type = "cpu"; - compatible = "arm,cortex-a57"; - reg = <0x1 0x100>; - enable-method = "spin-table"; - cpu-release-addr = <0 0x20000000>; - }; - - CPU11: cpu@100000101 { - device_type = "cpu"; - compatible = "arm,cortex-a57"; - reg = <0x1 0x101>; - enable-method = "spin-table"; - cpu-release-addr = <0 0x20000000>; - }; - - CPU12: cpu@100010000 { - device_type = "cpu"; - compatible = "arm,cortex-a57"; - reg = <0x1 0x10000>; - enable-method = "spin-table"; - cpu-release-addr = <0 0x20000000>; - }; - - CPU13: cpu@100010001 { - device_type = "cpu"; - compatible = "arm,cortex-a57"; - reg = <0x1 0x10001>; - enable-method = "spin-table"; - cpu-release-addr = <0 0x20000000>; - }; - - CPU14: cpu@100010100 { - device_type = "cpu"; - compatible = "arm,cortex-a57"; - reg = <0x1 0x10100>; - enable-method = "spin-table"; - cpu-release-addr = <0 0x20000000>; - }; - - CPU15: cpu@100010101 { - device_type = "cpu"; - compatible = "arm,cortex-a57"; - reg = <0x1 0x10101>; - enable-method = "spin-table"; - cpu-release-addr = <0 0x20000000>; - }; -}; - -Example 2 (ARM 32-bit, dual-cluster, 8-cpu system, no SMT): - -cpus { - #size-cells = <0>; - #address-cells = <1>; - - cpu-map { - cluster0 { - core0 { - cpu = <&CPU0>; - }; - core1 { - cpu = <&CPU1>; - }; - core2 { - cpu = <&CPU2>; - }; - core3 { - cpu = <&CPU3>; - }; - }; - - cluster1 { - core0 { - cpu = <&CPU4>; - }; - core1 { - cpu = <&CPU5>; - }; - core2 { - cpu = <&CPU6>; - }; - core3 { - cpu = <&CPU7>; - }; - }; - }; - - CPU0: cpu@0 { - device_type = "cpu"; - compatible = "arm,cortex-a15"; - reg = <0x0>; - }; - - CPU1: cpu@1 { - device_type = "cpu"; - compatible = "arm,cortex-a15"; - reg = <0x1>; - }; - - CPU2: cpu@2 { - device_type = "cpu"; - compatible = "arm,cortex-a15"; - reg = <0x2>; - }; - - CPU3: cpu@3 { - device_type = "cpu"; - compatible = "arm,cortex-a15"; - reg = <0x3>; - }; - - CPU4: cpu@100 { - device_type = "cpu"; - compatible = "arm,cortex-a7"; - reg = <0x100>; - }; - - CPU5: cpu@101 { - device_type = "cpu"; - compatible = "arm,cortex-a7"; - reg = <0x101>; - }; - - CPU6: cpu@102 { - device_type = "cpu"; - compatible = "arm,cortex-a7"; - reg = <0x102>; - }; - - CPU7: cpu@103 { - device_type = "cpu"; - compatible = "arm,cortex-a7"; - reg = <0x103>; - }; -}; - -=============================================================================== -[1] ARM Linux kernel documentation - Documentation/devicetree/bindings/arm/cpus.yaml |