aboutsummaryrefslogtreecommitdiff
path: root/Documentation/driver-api
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/driver-api')
-rw-r--r--Documentation/driver-api/backlight/lp855x-driver.rst81
-rw-r--r--Documentation/driver-api/bt8xxgpio.rst62
-rw-r--r--Documentation/driver-api/connector.rst156
-rw-r--r--Documentation/driver-api/console.rst152
-rw-r--r--Documentation/driver-api/dcdbas.rst99
-rw-r--r--Documentation/driver-api/dell_rbu.rst128
-rw-r--r--Documentation/driver-api/driver-model/binding.rst98
-rw-r--r--Documentation/driver-api/driver-model/bus.rst146
-rw-r--r--Documentation/driver-api/driver-model/class.rst149
-rw-r--r--Documentation/driver-api/driver-model/design-patterns.rst116
-rw-r--r--Documentation/driver-api/driver-model/device.rst109
-rw-r--r--Documentation/driver-api/driver-model/devres.rst414
-rw-r--r--Documentation/driver-api/driver-model/driver.rst223
-rw-r--r--Documentation/driver-api/driver-model/index.rst24
-rw-r--r--Documentation/driver-api/driver-model/overview.rst124
-rw-r--r--Documentation/driver-api/driver-model/platform.rst246
-rw-r--r--Documentation/driver-api/driver-model/porting.rst448
-rw-r--r--Documentation/driver-api/early-userspace/buffer-format.rst119
-rw-r--r--Documentation/driver-api/early-userspace/early_userspace_support.rst154
-rw-r--r--Documentation/driver-api/early-userspace/index.rst18
-rw-r--r--Documentation/driver-api/edid.rst58
-rw-r--r--Documentation/driver-api/eisa.rst230
-rw-r--r--Documentation/driver-api/gpio/driver.rst2
-rw-r--r--Documentation/driver-api/index.rst43
-rw-r--r--Documentation/driver-api/interconnect.rst93
-rw-r--r--Documentation/driver-api/isa.rst122
-rw-r--r--Documentation/driver-api/isapnp.rst15
-rw-r--r--Documentation/driver-api/lightnvm-pblk.rst21
-rw-r--r--Documentation/driver-api/md/index.rst12
-rw-r--r--Documentation/driver-api/md/md-cluster.rst385
-rw-r--r--Documentation/driver-api/md/raid5-cache.rst111
-rw-r--r--Documentation/driver-api/md/raid5-ppl.rst47
-rw-r--r--Documentation/driver-api/memory-devices/index.rst18
-rw-r--r--Documentation/driver-api/memory-devices/ti-emif.rst64
-rw-r--r--Documentation/driver-api/memory-devices/ti-gpmc.rst179
-rw-r--r--Documentation/driver-api/men-chameleon-bus.rst175
-rw-r--r--Documentation/driver-api/mmc/index.rst13
-rw-r--r--Documentation/driver-api/mmc/mmc-async-req.rst98
-rw-r--r--Documentation/driver-api/mmc/mmc-dev-attrs.rst91
-rw-r--r--Documentation/driver-api/mmc/mmc-dev-parts.rst41
-rw-r--r--Documentation/driver-api/mmc/mmc-tools.rst37
-rw-r--r--Documentation/driver-api/mtd/index.rst12
-rw-r--r--Documentation/driver-api/mtd/intel-spi.rst90
-rw-r--r--Documentation/driver-api/mtd/nand_ecc.rst763
-rw-r--r--Documentation/driver-api/mtd/spi-nor.rst66
-rw-r--r--Documentation/driver-api/nfc/index.rst11
-rw-r--r--Documentation/driver-api/nfc/nfc-hci.rst311
-rw-r--r--Documentation/driver-api/nfc/nfc-pn544.rst34
-rw-r--r--Documentation/driver-api/ntb.rst236
-rw-r--r--Documentation/driver-api/nvdimm/btt.rst285
-rw-r--r--Documentation/driver-api/nvdimm/index.rst12
-rw-r--r--Documentation/driver-api/nvdimm/nvdimm.rst887
-rw-r--r--Documentation/driver-api/nvdimm/security.rst143
-rw-r--r--Documentation/driver-api/nvmem.rst189
-rw-r--r--Documentation/driver-api/parport-lowlevel.rst1832
-rw-r--r--Documentation/driver-api/phy/index.rst18
-rw-r--r--Documentation/driver-api/phy/phy.rst197
-rw-r--r--Documentation/driver-api/phy/samsung-usb2.rst137
-rw-r--r--Documentation/driver-api/pps.rst2
-rw-r--r--Documentation/driver-api/pti_intel_mid.rst106
-rw-r--r--Documentation/driver-api/ptp.rst2
-rw-r--r--Documentation/driver-api/pwm.rst165
-rw-r--r--Documentation/driver-api/rapidio.rst107
-rw-r--r--Documentation/driver-api/rapidio/index.rst15
-rw-r--r--Documentation/driver-api/rapidio/mport_cdev.rst110
-rw-r--r--Documentation/driver-api/rapidio/rapidio.rst362
-rw-r--r--Documentation/driver-api/rapidio/rio_cm.rst135
-rw-r--r--Documentation/driver-api/rapidio/sysfs.rst7
-rw-r--r--Documentation/driver-api/rapidio/tsi721.rst112
-rw-r--r--Documentation/driver-api/rfkill.rst132
-rw-r--r--Documentation/driver-api/serial/cyclades_z.rst11
-rw-r--r--Documentation/driver-api/serial/driver.rst549
-rw-r--r--Documentation/driver-api/serial/index.rst32
-rw-r--r--Documentation/driver-api/serial/moxa-smartio.rst615
-rw-r--r--Documentation/driver-api/serial/n_gsm.rst103
-rw-r--r--Documentation/driver-api/serial/rocket.rst185
-rw-r--r--Documentation/driver-api/serial/serial-iso7816.rst90
-rw-r--r--Documentation/driver-api/serial/serial-rs485.rst103
-rw-r--r--Documentation/driver-api/serial/tty.rst328
-rw-r--r--Documentation/driver-api/sgi-ioc4.rst49
-rw-r--r--Documentation/driver-api/sm501.rst74
-rw-r--r--Documentation/driver-api/smsc_ece1099.rst60
-rw-r--r--Documentation/driver-api/switchtec.rst102
-rw-r--r--Documentation/driver-api/sync_file.rst86
-rw-r--r--Documentation/driver-api/vfio-mediated-device.rst414
-rw-r--r--Documentation/driver-api/vfio.rst520
-rw-r--r--Documentation/driver-api/xilinx/eemi.rst67
-rw-r--r--Documentation/driver-api/xilinx/index.rst16
-rw-r--r--Documentation/driver-api/xillybus.rst379
-rw-r--r--Documentation/driver-api/zorro.rst104
90 files changed, 15175 insertions, 111 deletions
diff --git a/Documentation/driver-api/backlight/lp855x-driver.rst b/Documentation/driver-api/backlight/lp855x-driver.rst
new file mode 100644
index 000000000000..1e0b224fc397
--- /dev/null
+++ b/Documentation/driver-api/backlight/lp855x-driver.rst
@@ -0,0 +1,81 @@
+====================
+Kernel driver lp855x
+====================
+
+Backlight driver for LP855x ICs
+
+Supported chips:
+
+ Texas Instruments LP8550, LP8551, LP8552, LP8553, LP8555, LP8556 and
+ LP8557
+
+Author: Milo(Woogyom) Kim <milo.kim@ti.com>
+
+Description
+-----------
+
+* Brightness control
+
+ Brightness can be controlled by the pwm input or the i2c command.
+ The lp855x driver supports both cases.
+
+* Device attributes
+
+ 1) bl_ctl_mode
+
+ Backlight control mode.
+
+ Value: pwm based or register based
+
+ 2) chip_id
+
+ The lp855x chip id.
+
+ Value: lp8550/lp8551/lp8552/lp8553/lp8555/lp8556/lp8557
+
+Platform data for lp855x
+------------------------
+
+For supporting platform specific data, the lp855x platform data can be used.
+
+* name:
+ Backlight driver name. If it is not defined, default name is set.
+* device_control:
+ Value of DEVICE CONTROL register.
+* initial_brightness:
+ Initial value of backlight brightness.
+* period_ns:
+ Platform specific PWM period value. unit is nano.
+ Only valid when brightness is pwm input mode.
+* size_program:
+ Total size of lp855x_rom_data.
+* rom_data:
+ List of new eeprom/eprom registers.
+
+Examples
+========
+
+1) lp8552 platform data: i2c register mode with new eeprom data::
+
+ #define EEPROM_A5_ADDR 0xA5
+ #define EEPROM_A5_VAL 0x4f /* EN_VSYNC=0 */
+
+ static struct lp855x_rom_data lp8552_eeprom_arr[] = {
+ {EEPROM_A5_ADDR, EEPROM_A5_VAL},
+ };
+
+ static struct lp855x_platform_data lp8552_pdata = {
+ .name = "lcd-bl",
+ .device_control = I2C_CONFIG(LP8552),
+ .initial_brightness = INITIAL_BRT,
+ .size_program = ARRAY_SIZE(lp8552_eeprom_arr),
+ .rom_data = lp8552_eeprom_arr,
+ };
+
+2) lp8556 platform data: pwm input mode with default rom data::
+
+ static struct lp855x_platform_data lp8556_pdata = {
+ .device_control = PWM_CONFIG(LP8556),
+ .initial_brightness = INITIAL_BRT,
+ .period_ns = 1000000,
+ };
diff --git a/Documentation/driver-api/bt8xxgpio.rst b/Documentation/driver-api/bt8xxgpio.rst
new file mode 100644
index 000000000000..a845feb074de
--- /dev/null
+++ b/Documentation/driver-api/bt8xxgpio.rst
@@ -0,0 +1,62 @@
+===================================================================
+A driver for a selfmade cheap BT8xx based PCI GPIO-card (bt8xxgpio)
+===================================================================
+
+For advanced documentation, see http://www.bu3sch.de/btgpio.php
+
+A generic digital 24-port PCI GPIO card can be built out of an ordinary
+Brooktree bt848, bt849, bt878 or bt879 based analog TV tuner card. The
+Brooktree chip is used in old analog Hauppauge WinTV PCI cards. You can easily
+find them used for low prices on the net.
+
+The bt8xx chip does have 24 digital GPIO ports.
+These ports are accessible via 24 pins on the SMD chip package.
+
+
+How to physically access the GPIO pins
+======================================
+
+The are several ways to access these pins. One might unsolder the whole chip
+and put it on a custom PCI board, or one might only unsolder each individual
+GPIO pin and solder that to some tiny wire. As the chip package really is tiny
+there are some advanced soldering skills needed in any case.
+
+The physical pinouts are drawn in the following ASCII art.
+The GPIO pins are marked with G00-G23::
+
+ G G G G G G G G G G G G G G G G G G
+ 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1
+ 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7
+ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
+ ---------------------------------------------------------------------------
+ --| ^ ^ |--
+ --| pin 86 pin 67 |--
+ --| |--
+ --| pin 61 > |-- G18
+ --| |-- G19
+ --| |-- G20
+ --| |-- G21
+ --| |-- G22
+ --| pin 56 > |-- G23
+ --| |--
+ --| Brooktree 878/879 |--
+ --| |--
+ --| |--
+ --| |--
+ --| |--
+ --| |--
+ --| |--
+ --| |--
+ --| |--
+ --| |--
+ --| |--
+ --| |--
+ --| |--
+ --| |--
+ --| O |--
+ --| |--
+ ---------------------------------------------------------------------------
+ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
+ ^
+ This is pin 1
+
diff --git a/Documentation/driver-api/connector.rst b/Documentation/driver-api/connector.rst
new file mode 100644
index 000000000000..c100c7482289
--- /dev/null
+++ b/Documentation/driver-api/connector.rst
@@ -0,0 +1,156 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+================
+Kernel Connector
+================
+
+Kernel connector - new netlink based userspace <-> kernel space easy
+to use communication module.
+
+The Connector driver makes it easy to connect various agents using a
+netlink based network. One must register a callback and an identifier.
+When the driver receives a special netlink message with the appropriate
+identifier, the appropriate callback will be called.
+
+From the userspace point of view it's quite straightforward:
+
+ - socket();
+ - bind();
+ - send();
+ - recv();
+
+But if kernelspace wants to use the full power of such connections, the
+driver writer must create special sockets, must know about struct sk_buff
+handling, etc... The Connector driver allows any kernelspace agents to use
+netlink based networking for inter-process communication in a significantly
+easier way::
+
+ int cn_add_callback(struct cb_id *id, char *name, void (*callback) (struct cn_msg *, struct netlink_skb_parms *));
+ void cn_netlink_send_multi(struct cn_msg *msg, u16 len, u32 portid, u32 __group, int gfp_mask);
+ void cn_netlink_send(struct cn_msg *msg, u32 portid, u32 __group, int gfp_mask);
+
+ struct cb_id
+ {
+ __u32 idx;
+ __u32 val;
+ };
+
+idx and val are unique identifiers which must be registered in the
+connector.h header for in-kernel usage. `void (*callback) (void *)` is a
+callback function which will be called when a message with above idx.val
+is received by the connector core. The argument for that function must
+be dereferenced to `struct cn_msg *`::
+
+ struct cn_msg
+ {
+ struct cb_id id;
+
+ __u32 seq;
+ __u32 ack;
+
+ __u32 len; /* Length of the following data */
+ __u8 data[0];
+ };
+
+Connector interfaces
+====================
+
+ .. kernel-doc:: include/linux/connector.h
+
+ Note:
+ When registering new callback user, connector core assigns
+ netlink group to the user which is equal to its id.idx.
+
+Protocol description
+====================
+
+The current framework offers a transport layer with fixed headers. The
+recommended protocol which uses such a header is as following:
+
+msg->seq and msg->ack are used to determine message genealogy. When
+someone sends a message, they use a locally unique sequence and random
+acknowledge number. The sequence number may be copied into
+nlmsghdr->nlmsg_seq too.
+
+The sequence number is incremented with each message sent.
+
+If you expect a reply to the message, then the sequence number in the
+received message MUST be the same as in the original message, and the
+acknowledge number MUST be the same + 1.
+
+If we receive a message and its sequence number is not equal to one we
+are expecting, then it is a new message. If we receive a message and
+its sequence number is the same as one we are expecting, but its
+acknowledge is not equal to the sequence number in the original
+message + 1, then it is a new message.
+
+Obviously, the protocol header contains the above id.
+
+The connector allows event notification in the following form: kernel
+driver or userspace process can ask connector to notify it when
+selected ids will be turned on or off (registered or unregistered its
+callback). It is done by sending a special command to the connector
+driver (it also registers itself with id={-1, -1}).
+
+As example of this usage can be found in the cn_test.c module which
+uses the connector to request notification and to send messages.
+
+Reliability
+===========
+
+Netlink itself is not a reliable protocol. That means that messages can
+be lost due to memory pressure or process' receiving queue overflowed,
+so caller is warned that it must be prepared. That is why the struct
+cn_msg [main connector's message header] contains u32 seq and u32 ack
+fields.
+
+Userspace usage
+===============
+
+2.6.14 has a new netlink socket implementation, which by default does not
+allow people to send data to netlink groups other than 1.
+So, if you wish to use a netlink socket (for example using connector)
+with a different group number, the userspace application must subscribe to
+that group first. It can be achieved by the following pseudocode::
+
+ s = socket(PF_NETLINK, SOCK_DGRAM, NETLINK_CONNECTOR);
+
+ l_local.nl_family = AF_NETLINK;
+ l_local.nl_groups = 12345;
+ l_local.nl_pid = 0;
+
+ if (bind(s, (struct sockaddr *)&l_local, sizeof(struct sockaddr_nl)) == -1) {
+ perror("bind");
+ close(s);
+ return -1;
+ }
+
+ {
+ int on = l_local.nl_groups;
+ setsockopt(s, 270, 1, &on, sizeof(on));
+ }
+
+Where 270 above is SOL_NETLINK, and 1 is a NETLINK_ADD_MEMBERSHIP socket
+option. To drop a multicast subscription, one should call the above socket
+option with the NETLINK_DROP_MEMBERSHIP parameter which is defined as 0.
+
+2.6.14 netlink code only allows to select a group which is less or equal to
+the maximum group number, which is used at netlink_kernel_create() time.
+In case of connector it is CN_NETLINK_USERS + 0xf, so if you want to use
+group number 12345, you must increment CN_NETLINK_USERS to that number.
+Additional 0xf numbers are allocated to be used by non-in-kernel users.
+
+Due to this limitation, group 0xffffffff does not work now, so one can
+not use add/remove connector's group notifications, but as far as I know,
+only cn_test.c test module used it.
+
+Some work in netlink area is still being done, so things can be changed in
+2.6.15 timeframe, if it will happen, documentation will be updated for that
+kernel.
+
+Code samples
+============
+
+Sample code for a connector test module and user space can be found
+in samples/connector/. To build this code, enable CONFIG_CONNECTOR
+and CONFIG_SAMPLES.
diff --git a/Documentation/driver-api/console.rst b/Documentation/driver-api/console.rst
new file mode 100644
index 000000000000..8394ad7747ac
--- /dev/null
+++ b/Documentation/driver-api/console.rst
@@ -0,0 +1,152 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+===============
+Console Drivers
+===============
+
+The Linux kernel has 2 general types of console drivers. The first type is
+assigned by the kernel to all the virtual consoles during the boot process.
+This type will be called 'system driver', and only one system driver is allowed
+to exist. The system driver is persistent and it can never be unloaded, though
+it may become inactive.
+
+The second type has to be explicitly loaded and unloaded. This will be called
+'modular driver' by this document. Multiple modular drivers can coexist at
+any time with each driver sharing the console with other drivers including
+the system driver. However, modular drivers cannot take over the console
+that is currently occupied by another modular driver. (Exception: Drivers that
+call do_take_over_console() will succeed in the takeover regardless of the type
+of driver occupying the consoles.) They can only take over the console that is
+occupied by the system driver. In the same token, if the modular driver is
+released by the console, the system driver will take over.
+
+Modular drivers, from the programmer's point of view, have to call::
+
+ do_take_over_console() - load and bind driver to console layer
+ give_up_console() - unload driver; it will only work if driver
+ is fully unbound
+
+In newer kernels, the following are also available::
+
+ do_register_con_driver()
+ do_unregister_con_driver()
+
+If sysfs is enabled, the contents of /sys/class/vtconsole can be
+examined. This shows the console backends currently registered by the
+system which are named vtcon<n> where <n> is an integer from 0 to 15.
+Thus::
+
+ ls /sys/class/vtconsole
+ . .. vtcon0 vtcon1
+
+Each directory in /sys/class/vtconsole has 3 files::
+
+ ls /sys/class/vtconsole/vtcon0
+ . .. bind name uevent
+
+What do these files signify?
+
+ 1. bind - this is a read/write file. It shows the status of the driver if
+ read, or acts to bind or unbind the driver to the virtual consoles
+ when written to. The possible values are:
+
+ 0
+ - means the driver is not bound and if echo'ed, commands the driver
+ to unbind
+
+ 1
+ - means the driver is bound and if echo'ed, commands the driver to
+ bind
+
+ 2. name - read-only file. Shows the name of the driver in this format::
+
+ cat /sys/class/vtconsole/vtcon0/name
+ (S) VGA+
+
+ '(S)' stands for a (S)ystem driver, i.e., it cannot be directly
+ commanded to bind or unbind
+
+ 'VGA+' is the name of the driver
+
+ cat /sys/class/vtconsole/vtcon1/name
+ (M) frame buffer device
+
+ In this case, '(M)' stands for a (M)odular driver, one that can be
+ directly commanded to bind or unbind.
+
+ 3. uevent - ignore this file
+
+When unbinding, the modular driver is detached first, and then the system
+driver takes over the consoles vacated by the driver. Binding, on the other
+hand, will bind the driver to the consoles that are currently occupied by a
+system driver.
+
+NOTE1:
+ Binding and unbinding must be selected in Kconfig. It's under::
+
+ Device Drivers ->
+ Character devices ->
+ Support for binding and unbinding console drivers
+
+NOTE2:
+ If any of the virtual consoles are in KD_GRAPHICS mode, then binding or
+ unbinding will not succeed. An example of an application that sets the
+ console to KD_GRAPHICS is X.
+
+How useful is this feature? This is very useful for console driver
+developers. By unbinding the driver from the console layer, one can unload the
+driver, make changes, recompile, reload and rebind the driver without any need
+for rebooting the kernel. For regular users who may want to switch from
+framebuffer console to VGA console and vice versa, this feature also makes
+this possible. (NOTE NOTE NOTE: Please read fbcon.txt under Documentation/fb
+for more details.)
+
+Notes for developers
+====================
+
+do_take_over_console() is now broken up into::
+
+ do_register_con_driver()
+ do_bind_con_driver() - private function
+
+give_up_console() is a wrapper to do_unregister_con_driver(), and a driver must
+be fully unbound for this call to succeed. con_is_bound() will check if the
+driver is bound or not.
+
+Guidelines for console driver writers
+=====================================
+
+In order for binding to and unbinding from the console to properly work,
+console drivers must follow these guidelines:
+
+1. All drivers, except system drivers, must call either do_register_con_driver()
+ or do_take_over_console(). do_register_con_driver() will just add the driver
+ to the console's internal list. It won't take over the
+ console. do_take_over_console(), as it name implies, will also take over (or
+ bind to) the console.
+
+2. All resources allocated during con->con_init() must be released in
+ con->con_deinit().
+
+3. All resources allocated in con->con_startup() must be released when the
+ driver, which was previously bound, becomes unbound. The console layer
+ does not have a complementary call to con->con_startup() so it's up to the
+ driver to check when it's legal to release these resources. Calling
+ con_is_bound() in con->con_deinit() will help. If the call returned
+ false(), then it's safe to release the resources. This balance has to be
+ ensured because con->con_startup() can be called again when a request to
+ rebind the driver to the console arrives.
+
+4. Upon exit of the driver, ensure that the driver is totally unbound. If the
+ condition is satisfied, then the driver must call do_unregister_con_driver()
+ or give_up_console().
+
+5. do_unregister_con_driver() can also be called on conditions which make it
+ impossible for the driver to service console requests. This can happen
+ with the framebuffer console that suddenly lost all of its drivers.
+
+The current crop of console drivers should still work correctly, but binding
+and unbinding them may cause problems. With minimal fixes, these drivers can
+be made to work correctly.
+
+Antonino Daplas <adaplas@pol.net>
diff --git a/Documentation/driver-api/dcdbas.rst b/Documentation/driver-api/dcdbas.rst
new file mode 100644
index 000000000000..309cc57a7c1c
--- /dev/null
+++ b/Documentation/driver-api/dcdbas.rst
@@ -0,0 +1,99 @@
+===================================
+Dell Systems Management Base Driver
+===================================
+
+Overview
+========
+
+The Dell Systems Management Base Driver provides a sysfs interface for
+systems management software such as Dell OpenManage to perform system
+management interrupts and host control actions (system power cycle or
+power off after OS shutdown) on certain Dell systems.
+
+Dell OpenManage requires this driver on the following Dell PowerEdge systems:
+300, 1300, 1400, 400SC, 500SC, 1500SC, 1550, 600SC, 1600SC, 650, 1655MC,
+700, and 750. Other Dell software such as the open source libsmbios project
+is expected to make use of this driver, and it may include the use of this
+driver on other Dell systems.
+
+The Dell libsmbios project aims towards providing access to as much BIOS
+information as possible. See http://linux.dell.com/libsmbios/main/ for
+more information about the libsmbios project.
+
+
+System Management Interrupt
+===========================
+
+On some Dell systems, systems management software must access certain
+management information via a system management interrupt (SMI). The SMI data
+buffer must reside in 32-bit address space, and the physical address of the
+buffer is required for the SMI. The driver maintains the memory required for
+the SMI and provides a way for the application to generate the SMI.
+The driver creates the following sysfs entries for systems management
+software to perform these system management interrupts::
+
+ /sys/devices/platform/dcdbas/smi_data
+ /sys/devices/platform/dcdbas/smi_data_buf_phys_addr
+ /sys/devices/platform/dcdbas/smi_data_buf_size
+ /sys/devices/platform/dcdbas/smi_request
+
+Systems management software must perform the following steps to execute
+a SMI using this driver:
+
+1) Lock smi_data.
+2) Write system management command to smi_data.
+3) Write "1" to smi_request to generate a calling interface SMI or
+ "2" to generate a raw SMI.
+4) Read system management command response from smi_data.
+5) Unlock smi_data.
+
+
+Host Control Action
+===================
+
+Dell OpenManage supports a host control feature that allows the administrator
+to perform a power cycle or power off of the system after the OS has finished
+shutting down. On some Dell systems, this host control feature requires that
+a driver perform a SMI after the OS has finished shutting down.
+
+The driver creates the following sysfs entries for systems management software
+to schedule the driver to perform a power cycle or power off host control
+action after the system has finished shutting down:
+
+/sys/devices/platform/dcdbas/host_control_action
+/sys/devices/platform/dcdbas/host_control_smi_type
+/sys/devices/platform/dcdbas/host_control_on_shutdown
+
+Dell OpenManage performs the following steps to execute a power cycle or
+power off host control action using this driver:
+
+1) Write host control action to be performed to host_control_action.
+2) Write type of SMI that driver needs to perform to host_control_smi_type.
+3) Write "1" to host_control_on_shutdown to enable host control action.
+4) Initiate OS shutdown.
+ (Driver will perform host control SMI when it is notified that the OS
+ has finished shutting down.)
+
+
+Host Control SMI Type
+=====================
+
+The following table shows the value to write to host_control_smi_type to
+perform a power cycle or power off host control action:
+
+=================== =====================
+PowerEdge System Host Control SMI Type
+=================== =====================
+ 300 HC_SMITYPE_TYPE1
+ 1300 HC_SMITYPE_TYPE1
+ 1400 HC_SMITYPE_TYPE2
+ 500SC HC_SMITYPE_TYPE2
+ 1500SC HC_SMITYPE_TYPE2
+ 1550 HC_SMITYPE_TYPE2
+ 600SC HC_SMITYPE_TYPE2
+ 1600SC HC_SMITYPE_TYPE2
+ 650 HC_SMITYPE_TYPE2
+ 1655MC HC_SMITYPE_TYPE2
+ 700 HC_SMITYPE_TYPE3
+ 750 HC_SMITYPE_TYPE3
+=================== =====================
diff --git a/Documentation/driver-api/dell_rbu.rst b/Documentation/driver-api/dell_rbu.rst
new file mode 100644
index 000000000000..5d1ce7bcd04d
--- /dev/null
+++ b/Documentation/driver-api/dell_rbu.rst
@@ -0,0 +1,128 @@
+=============================================================
+Usage of the new open sourced rbu (Remote BIOS Update) driver
+=============================================================
+
+Purpose
+=======
+
+Document demonstrating the use of the Dell Remote BIOS Update driver.
+for updating BIOS images on Dell servers and desktops.
+
+Scope
+=====
+
+This document discusses the functionality of the rbu driver only.
+It does not cover the support needed from applications to enable the BIOS to
+update itself with the image downloaded in to the memory.
+
+Overview
+========
+
+This driver works with Dell OpenManage or Dell Update Packages for updating
+the BIOS on Dell servers (starting from servers sold since 1999), desktops
+and notebooks (starting from those sold in 2005).
+
+Please go to http://support.dell.com register and you can find info on
+OpenManage and Dell Update packages (DUP).
+
+Libsmbios can also be used to update BIOS on Dell systems go to
+http://linux.dell.com/libsmbios/ for details.
+
+Dell_RBU driver supports BIOS update using the monolithic image and packetized
+image methods. In case of monolithic the driver allocates a contiguous chunk
+of physical pages having the BIOS image. In case of packetized the app
+using the driver breaks the image in to packets of fixed sizes and the driver
+would place each packet in contiguous physical memory. The driver also
+maintains a link list of packets for reading them back.
+
+If the dell_rbu driver is unloaded all the allocated memory is freed.
+
+The rbu driver needs to have an application (as mentioned above)which will
+inform the BIOS to enable the update in the next system reboot.
+
+The user should not unload the rbu driver after downloading the BIOS image
+or updating.
+
+The driver load creates the following directories under the /sys file system::
+
+ /sys/class/firmware/dell_rbu/loading
+ /sys/class/firmware/dell_rbu/data
+ /sys/devices/platform/dell_rbu/image_type
+ /sys/devices/platform/dell_rbu/data
+ /sys/devices/platform/dell_rbu/packet_size
+
+The driver supports two types of update mechanism; monolithic and packetized.
+These update mechanism depends upon the BIOS currently running on the system.
+Most of the Dell systems support a monolithic update where the BIOS image is
+copied to a single contiguous block of physical memory.
+
+In case of packet mechanism the single memory can be broken in smaller chunks
+of contiguous memory and the BIOS image is scattered in these packets.
+
+By default the driver uses monolithic memory for the update type. This can be
+changed to packets during the driver load time by specifying the load
+parameter image_type=packet. This can also be changed later as below::
+
+ echo packet > /sys/devices/platform/dell_rbu/image_type
+
+In packet update mode the packet size has to be given before any packets can
+be downloaded. It is done as below::
+
+ echo XXXX > /sys/devices/platform/dell_rbu/packet_size
+
+In the packet update mechanism, the user needs to create a new file having
+packets of data arranged back to back. It can be done as follows
+The user creates packets header, gets the chunk of the BIOS image and
+places it next to the packetheader; now, the packetheader + BIOS image chunk
+added together should match the specified packet_size. This makes one
+packet, the user needs to create more such packets out of the entire BIOS
+image file and then arrange all these packets back to back in to one single
+file.
+
+This file is then copied to /sys/class/firmware/dell_rbu/data.
+Once this file gets to the driver, the driver extracts packet_size data from
+the file and spreads it across the physical memory in contiguous packet_sized
+space.
+
+This method makes sure that all the packets get to the driver in a single operation.
+
+In monolithic update the user simply get the BIOS image (.hdr file) and copies
+to the data file as is without any change to the BIOS image itself.
+
+Do the steps below to download the BIOS image.
+
+1) echo 1 > /sys/class/firmware/dell_rbu/loading
+2) cp bios_image.hdr /sys/class/firmware/dell_rbu/data
+3) echo 0 > /sys/class/firmware/dell_rbu/loading
+
+The /sys/class/firmware/dell_rbu/ entries will remain till the following is
+done.
+
+::
+
+ echo -1 > /sys/class/firmware/dell_rbu/loading
+
+Until this step is completed the driver cannot be unloaded.
+
+Also echoing either mono, packet or init in to image_type will free up the
+memory allocated by the driver.
+
+If a user by accident executes steps 1 and 3 above without executing step 2;
+it will make the /sys/class/firmware/dell_rbu/ entries disappear.
+
+The entries can be recreated by doing the following::
+
+ echo init > /sys/devices/platform/dell_rbu/image_type
+
+.. note:: echoing init in image_type does not change it original value.
+
+Also the driver provides /sys/devices/platform/dell_rbu/data readonly file to
+read back the image downloaded.
+
+.. note::
+
+ After updating the BIOS image a user mode application needs to execute
+ code which sends the BIOS update request to the BIOS. So on the next reboot
+ the BIOS knows about the new image downloaded and it updates itself.
+ Also don't unload the rbu driver if the image has to be updated.
+
diff --git a/Documentation/driver-api/driver-model/binding.rst b/Documentation/driver-api/driver-model/binding.rst
new file mode 100644
index 000000000000..7ea1d7a41e1d
--- /dev/null
+++ b/Documentation/driver-api/driver-model/binding.rst
@@ -0,0 +1,98 @@
+==============
+Driver Binding
+==============
+
+Driver binding is the process of associating a device with a device
+driver that can control it. Bus drivers have typically handled this
+because there have been bus-specific structures to represent the
+devices and the drivers. With generic device and device driver
+structures, most of the binding can take place using common code.
+
+
+Bus
+~~~
+
+The bus type structure contains a list of all devices that are on that bus
+type in the system. When device_register is called for a device, it is
+inserted into the end of this list. The bus object also contains a
+list of all drivers of that bus type. When driver_register is called
+for a driver, it is inserted at the end of this list. These are the
+two events which trigger driver binding.
+
+
+device_register
+~~~~~~~~~~~~~~~
+
+When a new device is added, the bus's list of drivers is iterated over
+to find one that supports it. In order to determine that, the device
+ID of the device must match one of the device IDs that the driver
+supports. The format and semantics for comparing IDs is bus-specific.
+Instead of trying to derive a complex state machine and matching
+algorithm, it is up to the bus driver to provide a callback to compare
+a device against the IDs of a driver. The bus returns 1 if a match was
+found; 0 otherwise.
+
+int match(struct device * dev, struct device_driver * drv);
+
+If a match is found, the device's driver field is set to the driver
+and the driver's probe callback is called. This gives the driver a
+chance to verify that it really does support the hardware, and that
+it's in a working state.
+
+Device Class
+~~~~~~~~~~~~
+
+Upon the successful completion of probe, the device is registered with
+the class to which it belongs. Device drivers belong to one and only one
+class, and that is set in the driver's devclass field.
+devclass_add_device is called to enumerate the device within the class
+and actually register it with the class, which happens with the
+class's register_dev callback.
+
+
+Driver
+~~~~~~
+
+When a driver is attached to a device, the device is inserted into the
+driver's list of devices.
+
+
+sysfs
+~~~~~
+
+A symlink is created in the bus's 'devices' directory that points to
+the device's directory in the physical hierarchy.
+
+A symlink is created in the driver's 'devices' directory that points
+to the device's directory in the physical hierarchy.
+
+A directory for the device is created in the class's directory. A
+symlink is created in that directory that points to the device's
+physical location in the sysfs tree.
+
+A symlink can be created (though this isn't done yet) in the device's
+physical directory to either its class directory, or the class's
+top-level directory. One can also be created to point to its driver's
+directory also.
+
+
+driver_register
+~~~~~~~~~~~~~~~
+
+The process is almost identical for when a new driver is added.
+The bus's list of devices is iterated over to find a match. Devices
+that already have a driver are skipped. All the devices are iterated
+over, to bind as many devices as possible to the driver.
+
+
+Removal
+~~~~~~~
+
+When a device is removed, the reference count for it will eventually
+go to 0. When it does, the remove callback of the driver is called. It
+is removed from the driver's list of devices and the reference count
+of the driver is decremented. All symlinks between the two are removed.
+
+When a driver is removed, the list of devices that it supports is
+iterated over, and the driver's remove callback is called for each
+one. The device is removed from that list and the symlinks removed.
diff --git a/Documentation/driver-api/driver-model/bus.rst b/Documentation/driver-api/driver-model/bus.rst
new file mode 100644
index 000000000000..016b15a6e8ea
--- /dev/null
+++ b/Documentation/driver-api/driver-model/bus.rst
@@ -0,0 +1,146 @@
+=========
+Bus Types
+=========
+
+Definition
+~~~~~~~~~~
+See the kerneldoc for the struct bus_type.
+
+int bus_register(struct bus_type * bus);
+
+
+Declaration
+~~~~~~~~~~~
+
+Each bus type in the kernel (PCI, USB, etc) should declare one static
+object of this type. They must initialize the name field, and may
+optionally initialize the match callback::
+
+ struct bus_type pci_bus_type = {
+ .name = "pci",
+ .match = pci_bus_match,
+ };
+
+The structure should be exported to drivers in a header file:
+
+extern struct bus_type pci_bus_type;
+
+
+Registration
+~~~~~~~~~~~~
+
+When a bus driver is initialized, it calls bus_register. This
+initializes the rest of the fields in the bus object and inserts it
+into a global list of bus types. Once the bus object is registered,
+the fields in it are usable by the bus driver.
+
+
+Callbacks
+~~~~~~~~~
+
+match(): Attaching Drivers to Devices
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+The format of device ID structures and the semantics for comparing
+them are inherently bus-specific. Drivers typically declare an array
+of device IDs of devices they support that reside in a bus-specific
+driver structure.
+
+The purpose of the match callback is to give the bus an opportunity to
+determine if a particular driver supports a particular device by
+comparing the device IDs the driver supports with the device ID of a
+particular device, without sacrificing bus-specific functionality or
+type-safety.
+
+When a driver is registered with the bus, the bus's list of devices is
+iterated over, and the match callback is called for each device that
+does not have a driver associated with it.
+
+
+
+Device and Driver Lists
+~~~~~~~~~~~~~~~~~~~~~~~
+
+The lists of devices and drivers are intended to replace the local
+lists that many buses keep. They are lists of struct devices and
+struct device_drivers, respectively. Bus drivers are free to use the
+lists as they please, but conversion to the bus-specific type may be
+necessary.
+
+The LDM core provides helper functions for iterating over each list::
+
+ int bus_for_each_dev(struct bus_type * bus, struct device * start,
+ void * data,
+ int (*fn)(struct device *, void *));
+
+ int bus_for_each_drv(struct bus_type * bus, struct device_driver * start,
+ void * data, int (*fn)(struct device_driver *, void *));
+
+These helpers iterate over the respective list, and call the callback
+for each device or driver in the list. All list accesses are
+synchronized by taking the bus's lock (read currently). The reference
+count on each object in the list is incremented before the callback is
+called; it is decremented after the next object has been obtained. The
+lock is not held when calling the callback.
+
+
+sysfs
+~~~~~~~~
+There is a top-level directory named 'bus'.
+
+Each bus gets a directory in the bus directory, along with two default
+directories::
+
+ /sys/bus/pci/
+ |-- devices
+ `-- drivers
+
+Drivers registered with the bus get a directory in the bus's drivers
+directory::
+
+ /sys/bus/pci/
+ |-- devices
+ `-- drivers
+ |-- Intel ICH
+ |-- Intel ICH Joystick
+ |-- agpgart
+ `-- e100
+
+Each device that is discovered on a bus of that type gets a symlink in
+the bus's devices directory to the device's directory in the physical
+hierarchy::
+
+ /sys/bus/pci/
+ |-- devices
+ | |-- 00:00.0 -> ../../../root/pci0/00:00.0
+ | |-- 00:01.0 -> ../../../root/pci0/00:01.0
+ | `-- 00:02.0 -> ../../../root/pci0/00:02.0
+ `-- drivers
+
+
+Exporting Attributes
+~~~~~~~~~~~~~~~~~~~~
+
+::
+
+ struct bus_attribute {
+ struct attribute attr;
+ ssize_t (*show)(struct bus_type *, char * buf);
+ ssize_t (*store)(struct bus_type *, const char * buf, size_t count);
+ };
+
+Bus drivers can export attributes using the BUS_ATTR_RW macro that works
+similarly to the DEVICE_ATTR_RW macro for devices. For example, a
+definition like this::
+
+ static BUS_ATTR_RW(debug);
+
+is equivalent to declaring::
+
+ static bus_attribute bus_attr_debug;
+
+This can then be used to add and remove the attribute from the bus's
+sysfs directory using::
+
+ int bus_create_file(struct bus_type *, struct bus_attribute *);
+ void bus_remove_file(struct bus_type *, struct bus_attribute *);
diff --git a/Documentation/driver-api/driver-model/class.rst b/Documentation/driver-api/driver-model/class.rst
new file mode 100644
index 000000000000..fff55b80e86a
--- /dev/null
+++ b/Documentation/driver-api/driver-model/class.rst
@@ -0,0 +1,149 @@
+==============
+Device Classes
+==============
+
+Introduction
+~~~~~~~~~~~~
+A device class describes a type of device, like an audio or network
+device. The following device classes have been identified:
+
+<Insert List of Device Classes Here>
+
+
+Each device class defines a set of semantics and a programming interface
+that devices of that class adhere to. Device drivers are the
+implementation of that programming interface for a particular device on
+a particular bus.
+
+Device classes are agnostic with respect to what bus a device resides
+on.
+
+
+Programming Interface
+~~~~~~~~~~~~~~~~~~~~~
+The device class structure looks like::
+
+
+ typedef int (*devclass_add)(struct device *);
+ typedef void (*devclass_remove)(struct device *);
+
+See the kerneldoc for the struct class.
+
+A typical device class definition would look like::
+
+ struct device_class input_devclass = {
+ .name = "input",
+ .add_device = input_add_device,
+ .remove_device = input_remove_device,
+ };
+
+Each device class structure should be exported in a header file so it
+can be used by drivers, extensions and interfaces.
+
+Device classes are registered and unregistered with the core using::
+
+ int devclass_register(struct device_class * cls);
+ void devclass_unregister(struct device_class * cls);
+
+
+Devices
+~~~~~~~
+As devices are bound to drivers, they are added to the device class
+that the driver belongs to. Before the driver model core, this would
+typically happen during the driver's probe() callback, once the device
+has been initialized. It now happens after the probe() callback
+finishes from the core.
+
+The device is enumerated in the class. Each time a device is added to
+the class, the class's devnum field is incremented and assigned to the
+device. The field is never decremented, so if the device is removed
+from the class and re-added, it will receive a different enumerated
+value.
+
+The class is allowed to create a class-specific structure for the
+device and store it in the device's class_data pointer.
+
+There is no list of devices in the device class. Each driver has a
+list of devices that it supports. The device class has a list of
+drivers of that particular class. To access all of the devices in the
+class, iterate over the device lists of each driver in the class.
+
+
+Device Drivers
+~~~~~~~~~~~~~~
+Device drivers are added to device classes when they are registered
+with the core. A driver specifies the class it belongs to by setting
+the struct device_driver::devclass field.
+
+
+sysfs directory structure
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+There is a top-level sysfs directory named 'class'.
+
+Each class gets a directory in the class directory, along with two
+default subdirectories::
+
+ class/
+ `-- input
+ |-- devices
+ `-- drivers
+
+
+Drivers registered with the class get a symlink in the drivers/ directory
+that points to the driver's directory (under its bus directory)::
+
+ class/
+ `-- input
+ |-- devices
+ `-- drivers
+ `-- usb:usb_mouse -> ../../../bus/drivers/usb_mouse/
+
+
+Each device gets a symlink in the devices/ directory that points to the
+device's directory in the physical hierarchy::
+
+ class/
+ `-- input
+ |-- devices
+ | `-- 1 -> ../../../root/pci0/00:1f.0/usb_bus/00:1f.2-1:0/
+ `-- drivers
+
+
+Exporting Attributes
+~~~~~~~~~~~~~~~~~~~~
+
+::
+
+ struct devclass_attribute {
+ struct attribute attr;
+ ssize_t (*show)(struct device_class *, char * buf, size_t count, loff_t off);
+ ssize_t (*store)(struct device_class *, const char * buf, size_t count, loff_t off);
+ };
+
+Class drivers can export attributes using the DEVCLASS_ATTR macro that works
+similarly to the DEVICE_ATTR macro for devices. For example, a definition
+like this::
+
+ static DEVCLASS_ATTR(debug,0644,show_debug,store_debug);
+
+is equivalent to declaring::
+
+ static devclass_attribute devclass_attr_debug;
+
+The bus driver can add and remove the attribute from the class's
+sysfs directory using::
+
+ int devclass_create_file(struct device_class *, struct devclass_attribute *);
+ void devclass_remove_file(struct device_class *, struct devclass_attribute *);
+
+In the example above, the file will be named 'debug' in placed in the
+class's directory in sysfs.
+
+
+Interfaces
+~~~~~~~~~~
+There may exist multiple mechanisms for accessing the same device of a
+particular class type. Device interfaces describe these mechanisms.
+
+When a device is added to a device class, the core attempts to add it
+to every interface that is registered with the device class.
diff --git a/Documentation/driver-api/driver-model/design-patterns.rst b/Documentation/driver-api/driver-model/design-patterns.rst
new file mode 100644
index 000000000000..41eb8f41f7dd
--- /dev/null
+++ b/Documentation/driver-api/driver-model/design-patterns.rst
@@ -0,0 +1,116 @@
+=============================
+Device Driver Design Patterns
+=============================
+
+This document describes a few common design patterns found in device drivers.
+It is likely that subsystem maintainers will ask driver developers to
+conform to these design patterns.
+
+1. State Container
+2. container_of()
+
+
+1. State Container
+~~~~~~~~~~~~~~~~~~
+
+While the kernel contains a few device drivers that assume that they will
+only be probed() once on a certain system (singletons), it is custom to assume
+that the device the driver binds to will appear in several instances. This
+means that the probe() function and all callbacks need to be reentrant.
+
+The most common way to achieve this is to use the state container design
+pattern. It usually has this form::
+
+ struct foo {
+ spinlock_t lock; /* Example member */
+ (...)
+ };
+
+ static int foo_probe(...)
+ {
+ struct foo *foo;
+
+ foo = devm_kzalloc(dev, sizeof(*foo), GFP_KERNEL);
+ if (!foo)
+ return -ENOMEM;
+ spin_lock_init(&foo->lock);
+ (...)
+ }
+
+This will create an instance of struct foo in memory every time probe() is
+called. This is our state container for this instance of the device driver.
+Of course it is then necessary to always pass this instance of the
+state around to all functions that need access to the state and its members.
+
+For example, if the driver is registering an interrupt handler, you would
+pass around a pointer to struct foo like this::
+
+ static irqreturn_t foo_handler(int irq, void *arg)
+ {
+ struct foo *foo = arg;
+ (...)
+ }
+
+ static int foo_probe(...)
+ {
+ struct foo *foo;
+
+ (...)
+ ret = request_irq(irq, foo_handler, 0, "foo", foo);
+ }
+
+This way you always get a pointer back to the correct instance of foo in
+your interrupt handler.
+
+
+2. container_of()
+~~~~~~~~~~~~~~~~~
+
+Continuing on the above example we add an offloaded work::
+
+ struct foo {
+ spinlock_t lock;
+ struct workqueue_struct *wq;
+ struct work_struct offload;
+ (...)
+ };
+
+ static void foo_work(struct work_struct *work)
+ {
+ struct foo *foo = container_of(work, struct foo, offload);
+
+ (...)
+ }
+
+ static irqreturn_t foo_handler(int irq, void *arg)
+ {
+ struct foo *foo = arg;
+
+ queue_work(foo->wq, &foo->offload);
+ (...)
+ }
+
+ static int foo_probe(...)
+ {
+ struct foo *foo;
+
+ foo->wq = create_singlethread_workqueue("foo-wq");
+ INIT_WORK(&foo->offload, foo_work);
+ (...)
+ }
+
+The design pattern is the same for an hrtimer or something similar that will
+return a single argument which is a pointer to a struct member in the
+callback.
+
+container_of() is a macro defined in <linux/kernel.h>
+
+What container_of() does is to obtain a pointer to the containing struct from
+a pointer to a member by a simple subtraction using the offsetof() macro from
+standard C, which allows something similar to object oriented behaviours.
+Notice that the contained member must not be a pointer, but an actual member
+for this to work.
+
+We can see here that we avoid having global pointers to our struct foo *
+instance this way, while still keeping the number of parameters passed to the
+work function to a single pointer.
diff --git a/Documentation/driver-api/driver-model/device.rst b/Documentation/driver-api/driver-model/device.rst
new file mode 100644
index 000000000000..2b868d49d349
--- /dev/null
+++ b/Documentation/driver-api/driver-model/device.rst
@@ -0,0 +1,109 @@
+==========================
+The Basic Device Structure
+==========================
+
+See the kerneldoc for the struct device.
+
+
+Programming Interface
+~~~~~~~~~~~~~~~~~~~~~
+The bus driver that discovers the device uses this to register the
+device with the core::
+
+ int device_register(struct device * dev);
+
+The bus should initialize the following fields:
+
+ - parent
+ - name
+ - bus_id
+ - bus
+
+A device is removed from the core when its reference count goes to
+0. The reference count can be adjusted using::
+
+ struct device * get_device(struct device * dev);
+ void put_device(struct device * dev);
+
+get_device() will return a pointer to the struct device passed to it
+if the reference is not already 0 (if it's in the process of being
+removed already).
+
+A driver can access the lock in the device structure using::
+
+ void lock_device(struct device * dev);
+ void unlock_device(struct device * dev);
+
+
+Attributes
+~~~~~~~~~~
+
+::
+
+ struct device_attribute {
+ struct attribute attr;
+ ssize_t (*show)(struct device *dev, struct device_attribute *attr,
+ char *buf);
+ ssize_t (*store)(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count);
+ };
+
+Attributes of devices can be exported by a device driver through sysfs.
+
+Please see Documentation/filesystems/sysfs.txt for more information
+on how sysfs works.
+
+As explained in Documentation/kobject.txt, device attributes must be
+created before the KOBJ_ADD uevent is generated. The only way to realize
+that is by defining an attribute group.
+
+Attributes are declared using a macro called DEVICE_ATTR::
+
+ #define DEVICE_ATTR(name,mode,show,store)
+
+Example:::
+
+ static DEVICE_ATTR(type, 0444, show_type, NULL);
+ static DEVICE_ATTR(power, 0644, show_power, store_power);
+
+This declares two structures of type struct device_attribute with respective
+names 'dev_attr_type' and 'dev_attr_power'. These two attributes can be
+organized as follows into a group::
+
+ static struct attribute *dev_attrs[] = {
+ &dev_attr_type.attr,
+ &dev_attr_power.attr,
+ NULL,
+ };
+
+ static struct attribute_group dev_attr_group = {
+ .attrs = dev_attrs,
+ };
+
+ static const struct attribute_group *dev_attr_groups[] = {
+ &dev_attr_group,
+ NULL,
+ };
+
+This array of groups can then be associated with a device by setting the
+group pointer in struct device before device_register() is invoked::
+
+ dev->groups = dev_attr_groups;
+ device_register(dev);
+
+The device_register() function will use the 'groups' pointer to create the
+device attributes and the device_unregister() function will use this pointer
+to remove the device attributes.
+
+Word of warning: While the kernel allows device_create_file() and
+device_remove_file() to be called on a device at any time, userspace has
+strict expectations on when attributes get created. When a new device is
+registered in the kernel, a uevent is generated to notify userspace (like
+udev) that a new device is available. If attributes are added after the
+device is registered, then userspace won't get notified and userspace will
+not know about the new attributes.
+
+This is important for device driver that need to publish additional
+attributes for a device at driver probe time. If the device driver simply
+calls device_create_file() on the device structure passed to it, then
+userspace will never be notified of the new attributes.
diff --git a/Documentation/driver-api/driver-model/devres.rst b/Documentation/driver-api/driver-model/devres.rst
new file mode 100644
index 000000000000..4ac99122b5f1
--- /dev/null
+++ b/Documentation/driver-api/driver-model/devres.rst
@@ -0,0 +1,414 @@
+================================
+Devres - Managed Device Resource
+================================
+
+Tejun Heo <teheo@suse.de>
+
+First draft 10 January 2007
+
+.. contents
+
+ 1. Intro : Huh? Devres?
+ 2. Devres : Devres in a nutshell
+ 3. Devres Group : Group devres'es and release them together
+ 4. Details : Life time rules, calling context, ...
+ 5. Overhead : How much do we have to pay for this?
+ 6. List of managed interfaces: Currently implemented managed interfaces
+
+
+1. Intro
+--------
+
+devres came up while trying to convert libata to use iomap. Each
+iomapped address should be kept and unmapped on driver detach. For
+example, a plain SFF ATA controller (that is, good old PCI IDE) in
+native mode makes use of 5 PCI BARs and all of them should be
+maintained.
+
+As with many other device drivers, libata low level drivers have
+sufficient bugs in ->remove and ->probe failure path. Well, yes,
+that's probably because libata low level driver developers are lazy
+bunch, but aren't all low level driver developers? After spending a
+day fiddling with braindamaged hardware with no document or
+braindamaged document, if it's finally working, well, it's working.
+
+For one reason or another, low level drivers don't receive as much
+attention or testing as core code, and bugs on driver detach or
+initialization failure don't happen often enough to be noticeable.
+Init failure path is worse because it's much less travelled while
+needs to handle multiple entry points.
+
+So, many low level drivers end up leaking resources on driver detach
+and having half broken failure path implementation in ->probe() which
+would leak resources or even cause oops when failure occurs. iomap
+adds more to this mix. So do msi and msix.
+
+
+2. Devres
+---------
+
+devres is basically linked list of arbitrarily sized memory areas
+associated with a struct device. Each devres entry is associated with
+a release function. A devres can be released in several ways. No
+matter what, all devres entries are released on driver detach. On
+release, the associated release function is invoked and then the
+devres entry is freed.
+
+Managed interface is created for resources commonly used by device
+drivers using devres. For example, coherent DMA memory is acquired
+using dma_alloc_coherent(). The managed version is called
+dmam_alloc_coherent(). It is identical to dma_alloc_coherent() except
+for the DMA memory allocated using it is managed and will be
+automatically released on driver detach. Implementation looks like
+the following::
+
+ struct dma_devres {
+ size_t size;
+ void *vaddr;
+ dma_addr_t dma_handle;
+ };
+
+ static void dmam_coherent_release(struct device *dev, void *res)
+ {
+ struct dma_devres *this = res;
+
+ dma_free_coherent(dev, this->size, this->vaddr, this->dma_handle);
+ }
+
+ dmam_alloc_coherent(dev, size, dma_handle, gfp)
+ {
+ struct dma_devres *dr;
+ void *vaddr;
+
+ dr = devres_alloc(dmam_coherent_release, sizeof(*dr), gfp);
+ ...
+
+ /* alloc DMA memory as usual */
+ vaddr = dma_alloc_coherent(...);
+ ...
+
+ /* record size, vaddr, dma_handle in dr */
+ dr->vaddr = vaddr;
+ ...
+
+ devres_add(dev, dr);
+
+ return vaddr;
+ }
+
+If a driver uses dmam_alloc_coherent(), the area is guaranteed to be
+freed whether initialization fails half-way or the device gets
+detached. If most resources are acquired using managed interface, a
+driver can have much simpler init and exit code. Init path basically
+looks like the following::
+
+ my_init_one()
+ {
+ struct mydev *d;
+
+ d = devm_kzalloc(dev, sizeof(*d), GFP_KERNEL);
+ if (!d)
+ return -ENOMEM;
+
+ d->ring = dmam_alloc_coherent(...);
+ if (!d->ring)
+ return -ENOMEM;
+
+ if (check something)
+ return -EINVAL;
+ ...
+
+ return register_to_upper_layer(d);
+ }
+
+And exit path::
+
+ my_remove_one()
+ {
+ unregister_from_upper_layer(d);
+ shutdown_my_hardware();
+ }
+
+As shown above, low level drivers can be simplified a lot by using
+devres. Complexity is shifted from less maintained low level drivers
+to better maintained higher layer. Also, as init failure path is
+shared with exit path, both can get more testing.
+
+Note though that when converting current calls or assignments to
+managed devm_* versions it is up to you to check if internal operations
+like allocating memory, have failed. Managed resources pertains to the
+freeing of these resources *only* - all other checks needed are still
+on you. In some cases this may mean introducing checks that were not
+necessary before moving to the managed devm_* calls.
+
+
+3. Devres group
+---------------
+
+Devres entries can be grouped using devres group. When a group is
+released, all contained normal devres entries and properly nested
+groups are released. One usage is to rollback series of acquired
+resources on failure. For example::
+
+ if (!devres_open_group(dev, NULL, GFP_KERNEL))
+ return -ENOMEM;
+
+ acquire A;
+ if (failed)
+ goto err;
+
+ acquire B;
+ if (failed)
+ goto err;
+ ...
+
+ devres_remove_group(dev, NULL);
+ return 0;
+
+ err:
+ devres_release_group(dev, NULL);
+ return err_code;
+
+As resource acquisition failure usually means probe failure, constructs
+like above are usually useful in midlayer driver (e.g. libata core
+layer) where interface function shouldn't have side effect on failure.
+For LLDs, just returning error code suffices in most cases.
+
+Each group is identified by `void *id`. It can either be explicitly
+specified by @id argument to devres_open_group() or automatically
+created by passing NULL as @id as in the above example. In both
+cases, devres_open_group() returns the group's id. The returned id
+can be passed to other devres functions to select the target group.
+If NULL is given to those functions, the latest open group is
+selected.
+
+For example, you can do something like the following::
+
+ int my_midlayer_create_something()
+ {
+ if (!devres_open_group(dev, my_midlayer_create_something, GFP_KERNEL))
+ return -ENOMEM;
+
+ ...
+
+ devres_close_group(dev, my_midlayer_create_something);
+ return 0;
+ }
+
+ void my_midlayer_destroy_something()
+ {
+ devres_release_group(dev, my_midlayer_create_something);
+ }
+
+
+4. Details
+----------
+
+Lifetime of a devres entry begins on devres allocation and finishes
+when it is released or destroyed (removed and freed) - no reference
+counting.
+
+devres core guarantees atomicity to all basic devres operations and
+has support for single-instance devres types (atomic
+lookup-and-add-if-not-found). Other than that, synchronizing
+concurrent accesses to allocated devres data is caller's
+responsibility. This is usually non-issue because bus ops and
+resource allocations already do the job.
+
+For an example of single-instance devres type, read pcim_iomap_table()
+in lib/devres.c.
+
+All devres interface functions can be called without context if the
+right gfp mask is given.
+
+
+5. Overhead
+-----------
+
+Each devres bookkeeping info is allocated together with requested data
+area. With debug option turned off, bookkeeping info occupies 16
+bytes on 32bit machines and 24 bytes on 64bit (three pointers rounded
+up to ull alignment). If singly linked list is used, it can be
+reduced to two pointers (8 bytes on 32bit, 16 bytes on 64bit).
+
+Each devres group occupies 8 pointers. It can be reduced to 6 if
+singly linked list is used.
+
+Memory space overhead on ahci controller with two ports is between 300
+and 400 bytes on 32bit machine after naive conversion (we can
+certainly invest a bit more effort into libata core layer).
+
+
+6. List of managed interfaces
+-----------------------------
+
+CLOCK
+ devm_clk_get()
+ devm_clk_get_optional()
+ devm_clk_put()
+ devm_clk_hw_register()
+ devm_of_clk_add_hw_provider()
+ devm_clk_hw_register_clkdev()
+
+DMA
+ dmaenginem_async_device_register()
+ dmam_alloc_coherent()
+ dmam_alloc_attrs()
+ dmam_free_coherent()
+ dmam_pool_create()
+ dmam_pool_destroy()
+
+DRM
+ devm_drm_dev_init()
+
+GPIO
+ devm_gpiod_get()
+ devm_gpiod_get_index()
+ devm_gpiod_get_index_optional()
+ devm_gpiod_get_optional()
+ devm_gpiod_put()
+ devm_gpiod_unhinge()
+ devm_gpiochip_add_data()
+ devm_gpio_request()
+ devm_gpio_request_one()
+ devm_gpio_free()
+
+I2C
+ devm_i2c_new_dummy_device()
+
+IIO
+ devm_iio_device_alloc()
+ devm_iio_device_free()
+ devm_iio_device_register()
+ devm_iio_device_unregister()
+ devm_iio_kfifo_allocate()
+ devm_iio_kfifo_free()
+ devm_iio_triggered_buffer_setup()
+ devm_iio_triggered_buffer_cleanup()
+ devm_iio_trigger_alloc()
+ devm_iio_trigger_free()
+ devm_iio_trigger_register()
+ devm_iio_trigger_unregister()
+ devm_iio_channel_get()
+ devm_iio_channel_release()
+ devm_iio_channel_get_all()
+ devm_iio_channel_release_all()
+
+INPUT
+ devm_input_allocate_device()
+
+IO region
+ devm_release_mem_region()
+ devm_release_region()
+ devm_release_resource()
+ devm_request_mem_region()
+ devm_request_region()
+ devm_request_resource()
+
+IOMAP
+ devm_ioport_map()
+ devm_ioport_unmap()
+ devm_ioremap()
+ devm_ioremap_nocache()
+ devm_ioremap_wc()
+ devm_ioremap_resource() : checks resource, requests memory region, ioremaps
+ devm_iounmap()
+ pcim_iomap()
+ pcim_iomap_regions() : do request_region() and iomap() on multiple BARs
+ pcim_iomap_table() : array of mapped addresses indexed by BAR
+ pcim_iounmap()
+
+IRQ
+ devm_free_irq()
+ devm_request_any_context_irq()
+ devm_request_irq()
+ devm_request_threaded_irq()
+ devm_irq_alloc_descs()
+ devm_irq_alloc_desc()
+ devm_irq_alloc_desc_at()
+ devm_irq_alloc_desc_from()
+ devm_irq_alloc_descs_from()
+ devm_irq_alloc_generic_chip()
+ devm_irq_setup_generic_chip()
+ devm_irq_sim_init()
+
+LED
+ devm_led_classdev_register()
+ devm_led_classdev_unregister()
+
+MDIO
+ devm_mdiobus_alloc()
+ devm_mdiobus_alloc_size()
+ devm_mdiobus_free()
+
+MEM
+ devm_free_pages()
+ devm_get_free_pages()
+ devm_kasprintf()
+ devm_kcalloc()
+ devm_kfree()
+ devm_kmalloc()
+ devm_kmalloc_array()
+ devm_kmemdup()
+ devm_kstrdup()
+ devm_kvasprintf()
+ devm_kzalloc()
+
+MFD
+ devm_mfd_add_devices()
+
+MUX
+ devm_mux_chip_alloc()
+ devm_mux_chip_register()
+ devm_mux_control_get()
+
+PER-CPU MEM
+ devm_alloc_percpu()
+ devm_free_percpu()
+
+PCI
+ devm_pci_alloc_host_bridge() : managed PCI host bridge allocation
+ devm_pci_remap_cfgspace() : ioremap PCI configuration space
+ devm_pci_remap_cfg_resource() : ioremap PCI configuration space resource
+ pcim_enable_device() : after success, all PCI ops become managed
+ pcim_pin_device() : keep PCI device enabled after release
+
+PHY
+ devm_usb_get_phy()
+ devm_usb_put_phy()
+
+PINCTRL
+ devm_pinctrl_get()
+ devm_pinctrl_put()
+ devm_pinctrl_register()
+ devm_pinctrl_unregister()
+
+POWER
+ devm_reboot_mode_register()
+ devm_reboot_mode_unregister()
+
+PWM
+ devm_pwm_get()
+ devm_pwm_put()
+
+REGULATOR
+ devm_regulator_bulk_get()
+ devm_regulator_get()
+ devm_regulator_put()
+ devm_regulator_register()
+
+RESET
+ devm_reset_control_get()
+ devm_reset_controller_register()
+
+SERDEV
+ devm_serdev_device_open()
+
+SLAVE DMA ENGINE
+ devm_acpi_dma_controller_register()
+
+SPI
+ devm_spi_register_master()
+
+WATCHDOG
+ devm_watchdog_register_device()
diff --git a/Documentation/driver-api/driver-model/driver.rst b/Documentation/driver-api/driver-model/driver.rst
new file mode 100644
index 000000000000..11d281506a04
--- /dev/null
+++ b/Documentation/driver-api/driver-model/driver.rst
@@ -0,0 +1,223 @@
+==============
+Device Drivers
+==============
+
+See the kerneldoc for the struct device_driver.
+
+
+Allocation
+~~~~~~~~~~
+
+Device drivers are statically allocated structures. Though there may
+be multiple devices in a system that a driver supports, struct
+device_driver represents the driver as a whole (not a particular
+device instance).
+
+Initialization
+~~~~~~~~~~~~~~
+
+The driver must initialize at least the name and bus fields. It should
+also initialize the devclass field (when it arrives), so it may obtain
+the proper linkage internally. It should also initialize as many of
+the callbacks as possible, though each is optional.
+
+Declaration
+~~~~~~~~~~~
+
+As stated above, struct device_driver objects are statically
+allocated. Below is an example declaration of the eepro100
+driver. This declaration is hypothetical only; it relies on the driver
+being converted completely to the new model::
+
+ static struct device_driver eepro100_driver = {
+ .name = "eepro100",
+ .bus = &pci_bus_type,
+
+ .probe = eepro100_probe,
+ .remove = eepro100_remove,
+ .suspend = eepro100_suspend,
+ .resume = eepro100_resume,
+ };
+
+Most drivers will not be able to be converted completely to the new
+model because the bus they belong to has a bus-specific structure with
+bus-specific fields that cannot be generalized.
+
+The most common example of this are device ID structures. A driver
+typically defines an array of device IDs that it supports. The format
+of these structures and the semantics for comparing device IDs are
+completely bus-specific. Defining them as bus-specific entities would
+sacrifice type-safety, so we keep bus-specific structures around.
+
+Bus-specific drivers should include a generic struct device_driver in
+the definition of the bus-specific driver. Like this::
+
+ struct pci_driver {
+ const struct pci_device_id *id_table;
+ struct device_driver driver;
+ };
+
+A definition that included bus-specific fields would look like
+(using the eepro100 driver again)::
+
+ static struct pci_driver eepro100_driver = {
+ .id_table = eepro100_pci_tbl,
+ .driver = {
+ .name = "eepro100",
+ .bus = &pci_bus_type,
+ .probe = eepro100_probe,
+ .remove = eepro100_remove,
+ .suspend = eepro100_suspend,
+ .resume = eepro100_resume,
+ },
+ };
+
+Some may find the syntax of embedded struct initialization awkward or
+even a bit ugly. So far, it's the best way we've found to do what we want...
+
+Registration
+~~~~~~~~~~~~
+
+::
+
+ int driver_register(struct device_driver *drv);
+
+The driver registers the structure on startup. For drivers that have
+no bus-specific fields (i.e. don't have a bus-specific driver
+structure), they would use driver_register and pass a pointer to their
+struct device_driver object.
+
+Most drivers, however, will have a bus-specific structure and will
+need to register with the bus using something like pci_driver_register.
+
+It is important that drivers register their driver structure as early as
+possible. Registration with the core initializes several fields in the
+struct device_driver object, including the reference count and the
+lock. These fields are assumed to be valid at all times and may be
+used by the device model core or the bus driver.
+
+
+Transition Bus Drivers
+~~~~~~~~~~~~~~~~~~~~~~
+
+By defining wrapper functions, the transition to the new model can be
+made easier. Drivers can ignore the generic structure altogether and
+let the bus wrapper fill in the fields. For the callbacks, the bus can
+define generic callbacks that forward the call to the bus-specific
+callbacks of the drivers.
+
+This solution is intended to be only temporary. In order to get class
+information in the driver, the drivers must be modified anyway. Since
+converting drivers to the new model should reduce some infrastructural
+complexity and code size, it is recommended that they are converted as
+class information is added.
+
+Access
+~~~~~~
+
+Once the object has been registered, it may access the common fields of
+the object, like the lock and the list of devices::
+
+ int driver_for_each_dev(struct device_driver *drv, void *data,
+ int (*callback)(struct device *dev, void *data));
+
+The devices field is a list of all the devices that have been bound to
+the driver. The LDM core provides a helper function to operate on all
+the devices a driver controls. This helper locks the driver on each
+node access, and does proper reference counting on each device as it
+accesses it.
+
+
+sysfs
+~~~~~
+
+When a driver is registered, a sysfs directory is created in its
+bus's directory. In this directory, the driver can export an interface
+to userspace to control operation of the driver on a global basis;
+e.g. toggling debugging output in the driver.
+
+A future feature of this directory will be a 'devices' directory. This
+directory will contain symlinks to the directories of devices it
+supports.
+
+
+
+Callbacks
+~~~~~~~~~
+
+::
+
+ int (*probe) (struct device *dev);
+
+The probe() entry is called in task context, with the bus's rwsem locked
+and the driver partially bound to the device. Drivers commonly use
+container_of() to convert "dev" to a bus-specific type, both in probe()
+and other routines. That type often provides device resource data, such
+as pci_dev.resource[] or platform_device.resources, which is used in
+addition to dev->platform_data to initialize the driver.
+
+This callback holds the driver-specific logic to bind the driver to a
+given device. That includes verifying that the device is present, that
+it's a version the driver can handle, that driver data structures can
+be allocated and initialized, and that any hardware can be initialized.
+Drivers often store a pointer to their state with dev_set_drvdata().
+When the driver has successfully bound itself to that device, then probe()
+returns zero and the driver model code will finish its part of binding
+the driver to that device.
+
+A driver's probe() may return a negative errno value to indicate that
+the driver did not bind to this device, in which case it should have
+released all resources it allocated::
+
+ int (*remove) (struct device *dev);
+
+remove is called to unbind a driver from a device. This may be
+called if a device is physically removed from the system, if the
+driver module is being unloaded, during a reboot sequence, or
+in other cases.
+
+It is up to the driver to determine if the device is present or
+not. It should free any resources allocated specifically for the
+device; i.e. anything in the device's driver_data field.
+
+If the device is still present, it should quiesce the device and place
+it into a supported low-power state::
+
+ int (*suspend) (struct device *dev, pm_message_t state);
+
+suspend is called to put the device in a low power state::
+
+ int (*resume) (struct device *dev);
+
+Resume is used to bring a device back from a low power state.
+
+
+Attributes
+~~~~~~~~~~
+
+::
+
+ struct driver_attribute {
+ struct attribute attr;
+ ssize_t (*show)(struct device_driver *driver, char *buf);
+ ssize_t (*store)(struct device_driver *, const char *buf, size_t count);
+ };
+
+Device drivers can export attributes via their sysfs directories.
+Drivers can declare attributes using a DRIVER_ATTR_RW and DRIVER_ATTR_RO
+macro that works identically to the DEVICE_ATTR_RW and DEVICE_ATTR_RO
+macros.
+
+Example::
+
+ DRIVER_ATTR_RW(debug);
+
+This is equivalent to declaring::
+
+ struct driver_attribute driver_attr_debug;
+
+This can then be used to add and remove the attribute from the
+driver's directory using::
+
+ int driver_create_file(struct device_driver *, const struct driver_attribute *);
+ void driver_remove_file(struct device_driver *, const struct driver_attribute *);
diff --git a/Documentation/driver-api/driver-model/index.rst b/Documentation/driver-api/driver-model/index.rst
new file mode 100644
index 000000000000..755016422269
--- /dev/null
+++ b/Documentation/driver-api/driver-model/index.rst
@@ -0,0 +1,24 @@
+============
+Driver Model
+============
+
+.. toctree::
+ :maxdepth: 1
+
+ binding
+ bus
+ class
+ design-patterns
+ device
+ devres
+ driver
+ overview
+ platform
+ porting
+
+.. only:: subproject and html
+
+ Indices
+ =======
+
+ * :ref:`genindex`
diff --git a/Documentation/driver-api/driver-model/overview.rst b/Documentation/driver-api/driver-model/overview.rst
new file mode 100644
index 000000000000..d4d1e9b40e0c
--- /dev/null
+++ b/Documentation/driver-api/driver-model/overview.rst
@@ -0,0 +1,124 @@
+=============================
+The Linux Kernel Device Model
+=============================
+
+Patrick Mochel <mochel@digitalimplant.org>
+
+Drafted 26 August 2002
+Updated 31 January 2006
+
+
+Overview
+~~~~~~~~
+
+The Linux Kernel Driver Model is a unification of all the disparate driver
+models that were previously used in the kernel. It is intended to augment the
+bus-specific drivers for bridges and devices by consolidating a set of data
+and operations into globally accessible data structures.
+
+Traditional driver models implemented some sort of tree-like structure
+(sometimes just a list) for the devices they control. There wasn't any
+uniformity across the different bus types.
+
+The current driver model provides a common, uniform data model for describing
+a bus and the devices that can appear under the bus. The unified bus
+model includes a set of common attributes which all busses carry, and a set
+of common callbacks, such as device discovery during bus probing, bus
+shutdown, bus power management, etc.
+
+The common device and bridge interface reflects the goals of the modern
+computer: namely the ability to do seamless device "plug and play", power
+management, and hot plug. In particular, the model dictated by Intel and
+Microsoft (namely ACPI) ensures that almost every device on almost any bus
+on an x86-compatible system can work within this paradigm. Of course,
+not every bus is able to support all such operations, although most
+buses support most of those operations.
+
+
+Downstream Access
+~~~~~~~~~~~~~~~~~
+
+Common data fields have been moved out of individual bus layers into a common
+data structure. These fields must still be accessed by the bus layers,
+and sometimes by the device-specific drivers.
+
+Other bus layers are encouraged to do what has been done for the PCI layer.
+struct pci_dev now looks like this::
+
+ struct pci_dev {
+ ...
+
+ struct device dev; /* Generic device interface */
+ ...
+ };
+
+Note first that the struct device dev within the struct pci_dev is
+statically allocated. This means only one allocation on device discovery.
+
+Note also that that struct device dev is not necessarily defined at the
+front of the pci_dev structure. This is to make people think about what
+they're doing when switching between the bus driver and the global driver,
+and to discourage meaningless and incorrect casts between the two.
+
+The PCI bus layer freely accesses the fields of struct device. It knows about
+the structure of struct pci_dev, and it should know the structure of struct
+device. Individual PCI device drivers that have been converted to the current
+driver model generally do not and should not touch the fields of struct device,
+unless there is a compelling reason to do so.
+
+The above abstraction prevents unnecessary pain during transitional phases.
+If it were not done this way, then when a field was renamed or removed, every
+downstream driver would break. On the other hand, if only the bus layer
+(and not the device layer) accesses the struct device, it is only the bus
+layer that needs to change.
+
+
+User Interface
+~~~~~~~~~~~~~~
+
+By virtue of having a complete hierarchical view of all the devices in the
+system, exporting a complete hierarchical view to userspace becomes relatively
+easy. This has been accomplished by implementing a special purpose virtual
+file system named sysfs.
+
+Almost all mainstream Linux distros mount this filesystem automatically; you
+can see some variation of the following in the output of the "mount" command::
+
+ $ mount
+ ...
+ none on /sys type sysfs (rw,noexec,nosuid,nodev)
+ ...
+ $
+
+The auto-mounting of sysfs is typically accomplished by an entry similar to
+the following in the /etc/fstab file::
+
+ none /sys sysfs defaults 0 0
+
+or something similar in the /lib/init/fstab file on Debian-based systems::
+
+ none /sys sysfs nodev,noexec,nosuid 0 0
+
+If sysfs is not automatically mounted, you can always do it manually with::
+
+ # mount -t sysfs sysfs /sys
+
+Whenever a device is inserted into the tree, a directory is created for it.
+This directory may be populated at each layer of discovery - the global layer,
+the bus layer, or the device layer.
+
+The global layer currently creates two files - 'name' and 'power'. The
+former only reports the name of the device. The latter reports the
+current power state of the device. It will also be used to set the current
+power state.
+
+The bus layer may also create files for the devices it finds while probing the
+bus. For example, the PCI layer currently creates 'irq' and 'resource' files
+for each PCI device.
+
+A device-specific driver may also export files in its directory to expose
+device-specific data or tunable interfaces.
+
+More information about the sysfs directory layout can be found in
+the other documents in this directory and in the file
+Documentation/filesystems/sysfs.txt.
diff --git a/Documentation/driver-api/driver-model/platform.rst b/Documentation/driver-api/driver-model/platform.rst
new file mode 100644
index 000000000000..334dd4071ae4
--- /dev/null
+++ b/Documentation/driver-api/driver-model/platform.rst
@@ -0,0 +1,246 @@
+============================
+Platform Devices and Drivers
+============================
+
+See <linux/platform_device.h> for the driver model interface to the
+platform bus: platform_device, and platform_driver. This pseudo-bus
+is used to connect devices on busses with minimal infrastructure,
+like those used to integrate peripherals on many system-on-chip
+processors, or some "legacy" PC interconnects; as opposed to large
+formally specified ones like PCI or USB.
+
+
+Platform devices
+~~~~~~~~~~~~~~~~
+Platform devices are devices that typically appear as autonomous
+entities in the system. This includes legacy port-based devices and
+host bridges to peripheral buses, and most controllers integrated
+into system-on-chip platforms. What they usually have in common
+is direct addressing from a CPU bus. Rarely, a platform_device will
+be connected through a segment of some other kind of bus; but its
+registers will still be directly addressable.
+
+Platform devices are given a name, used in driver binding, and a
+list of resources such as addresses and IRQs::
+
+ struct platform_device {
+ const char *name;
+ u32 id;
+ struct device dev;
+ u32 num_resources;
+ struct resource *resource;
+ };
+
+
+Platform drivers
+~~~~~~~~~~~~~~~~
+Platform drivers follow the standard driver model convention, where
+discovery/enumeration is handled outside the drivers, and drivers
+provide probe() and remove() methods. They support power management
+and shutdown notifications using the standard conventions::
+
+ struct platform_driver {
+ int (*probe)(struct platform_device *);
+ int (*remove)(struct platform_device *);
+ void (*shutdown)(struct platform_device *);
+ int (*suspend)(struct platform_device *, pm_message_t state);
+ int (*suspend_late)(struct platform_device *, pm_message_t state);
+ int (*resume_early)(struct platform_device *);
+ int (*resume)(struct platform_device *);
+ struct device_driver driver;
+ };
+
+Note that probe() should in general verify that the specified device hardware
+actually exists; sometimes platform setup code can't be sure. The probing
+can use device resources, including clocks, and device platform_data.
+
+Platform drivers register themselves the normal way::
+
+ int platform_driver_register(struct platform_driver *drv);
+
+Or, in common situations where the device is known not to be hot-pluggable,
+the probe() routine can live in an init section to reduce the driver's
+runtime memory footprint::
+
+ int platform_driver_probe(struct platform_driver *drv,
+ int (*probe)(struct platform_device *))
+
+Kernel modules can be composed of several platform drivers. The platform core
+provides helpers to register and unregister an array of drivers::
+
+ int __platform_register_drivers(struct platform_driver * const *drivers,
+ unsigned int count, struct module *owner);
+ void platform_unregister_drivers(struct platform_driver * const *drivers,
+ unsigned int count);
+
+If one of the drivers fails to register, all drivers registered up to that
+point will be unregistered in reverse order. Note that there is a convenience
+macro that passes THIS_MODULE as owner parameter::
+
+ #define platform_register_drivers(drivers, count)
+
+
+Device Enumeration
+~~~~~~~~~~~~~~~~~~
+As a rule, platform specific (and often board-specific) setup code will
+register platform devices::
+
+ int platform_device_register(struct platform_device *pdev);
+
+ int platform_add_devices(struct platform_device **pdevs, int ndev);
+
+The general rule is to register only those devices that actually exist,
+but in some cases extra devices might be registered. For example, a kernel
+might be configured to work with an external network adapter that might not
+be populated on all boards, or likewise to work with an integrated controller
+that some boards might not hook up to any peripherals.
+
+In some cases, boot firmware will export tables describing the devices
+that are populated on a given board. Without such tables, often the
+only way for system setup code to set up the correct devices is to build
+a kernel for a specific target board. Such board-specific kernels are
+common with embedded and custom systems development.
+
+In many cases, the memory and IRQ resources associated with the platform
+device are not enough to let the device's driver work. Board setup code
+will often provide additional information using the device's platform_data
+field to hold additional information.
+
+Embedded systems frequently need one or more clocks for platform devices,
+which are normally kept off until they're actively needed (to save power).
+System setup also associates those clocks with the device, so that that
+calls to clk_get(&pdev->dev, clock_name) return them as needed.
+
+
+Legacy Drivers: Device Probing
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Some drivers are not fully converted to the driver model, because they take
+on a non-driver role: the driver registers its platform device, rather than
+leaving that for system infrastructure. Such drivers can't be hotplugged
+or coldplugged, since those mechanisms require device creation to be in a
+different system component than the driver.
+
+The only "good" reason for this is to handle older system designs which, like
+original IBM PCs, rely on error-prone "probe-the-hardware" models for hardware
+configuration. Newer systems have largely abandoned that model, in favor of
+bus-level support for dynamic configuration (PCI, USB), or device tables
+provided by the boot firmware (e.g. PNPACPI on x86). There are too many
+conflicting options about what might be where, and even educated guesses by
+an operating system will be wrong often enough to make trouble.
+
+This style of driver is discouraged. If you're updating such a driver,
+please try to move the device enumeration to a more appropriate location,
+outside the driver. This will usually be cleanup, since such drivers
+tend to already have "normal" modes, such as ones using device nodes that
+were created by PNP or by platform device setup.
+
+None the less, there are some APIs to support such legacy drivers. Avoid
+using these calls except with such hotplug-deficient drivers::
+
+ struct platform_device *platform_device_alloc(
+ const char *name, int id);
+
+You can use platform_device_alloc() to dynamically allocate a device, which
+you will then initialize with resources and platform_device_register().
+A better solution is usually::
+
+ struct platform_device *platform_device_register_simple(
+ const char *name, int id,
+ struct resource *res, unsigned int nres);
+
+You can use platform_device_register_simple() as a one-step call to allocate
+and register a device.
+
+
+Device Naming and Driver Binding
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+The platform_device.dev.bus_id is the canonical name for the devices.
+It's built from two components:
+
+ * platform_device.name ... which is also used to for driver matching.
+
+ * platform_device.id ... the device instance number, or else "-1"
+ to indicate there's only one.
+
+These are concatenated, so name/id "serial"/0 indicates bus_id "serial.0", and
+"serial/3" indicates bus_id "serial.3"; both would use the platform_driver
+named "serial". While "my_rtc"/-1 would be bus_id "my_rtc" (no instance id)
+and use the platform_driver called "my_rtc".
+
+Driver binding is performed automatically by the driver core, invoking
+driver probe() after finding a match between device and driver. If the
+probe() succeeds, the driver and device are bound as usual. There are
+three different ways to find such a match:
+
+ - Whenever a device is registered, the drivers for that bus are
+ checked for matches. Platform devices should be registered very
+ early during system boot.
+
+ - When a driver is registered using platform_driver_register(), all
+ unbound devices on that bus are checked for matches. Drivers
+ usually register later during booting, or by module loading.
+
+ - Registering a driver using platform_driver_probe() works just like
+ using platform_driver_register(), except that the driver won't
+ be probed later if another device registers. (Which is OK, since
+ this interface is only for use with non-hotpluggable devices.)
+
+
+Early Platform Devices and Drivers
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+The early platform interfaces provide platform data to platform device
+drivers early on during the system boot. The code is built on top of the
+early_param() command line parsing and can be executed very early on.
+
+Example: "earlyprintk" class early serial console in 6 steps
+
+1. Registering early platform device data
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+The architecture code registers platform device data using the function
+early_platform_add_devices(). In the case of early serial console this
+should be hardware configuration for the serial port. Devices registered
+at this point will later on be matched against early platform drivers.
+
+2. Parsing kernel command line
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+The architecture code calls parse_early_param() to parse the kernel
+command line. This will execute all matching early_param() callbacks.
+User specified early platform devices will be registered at this point.
+For the early serial console case the user can specify port on the
+kernel command line as "earlyprintk=serial.0" where "earlyprintk" is
+the class string, "serial" is the name of the platform driver and
+0 is the platform device id. If the id is -1 then the dot and the
+id can be omitted.
+
+3. Installing early platform drivers belonging to a certain class
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+The architecture code may optionally force registration of all early
+platform drivers belonging to a certain class using the function
+early_platform_driver_register_all(). User specified devices from
+step 2 have priority over these. This step is omitted by the serial
+driver example since the early serial driver code should be disabled
+unless the user has specified port on the kernel command line.
+
+4. Early platform driver registration
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Compiled-in platform drivers making use of early_platform_init() are
+automatically registered during step 2 or 3. The serial driver example
+should use early_platform_init("earlyprintk", &platform_driver).
+
+5. Probing of early platform drivers belonging to a certain class
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+The architecture code calls early_platform_driver_probe() to match
+registered early platform devices associated with a certain class with
+registered early platform drivers. Matched devices will get probed().
+This step can be executed at any point during the early boot. As soon
+as possible may be good for the serial port case.
+
+6. Inside the early platform driver probe()
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+The driver code needs to take special care during early boot, especially
+when it comes to memory allocation and interrupt registration. The code
+in the probe() function can use is_early_platform_device() to check if
+it is called at early platform device or at the regular platform device
+time. The early serial driver performs register_console() at this point.
+
+For further information, see <linux/platform_device.h>.
diff --git a/Documentation/driver-api/driver-model/porting.rst b/Documentation/driver-api/driver-model/porting.rst
new file mode 100644
index 000000000000..931ea879af3f
--- /dev/null
+++ b/Documentation/driver-api/driver-model/porting.rst
@@ -0,0 +1,448 @@
+=======================================
+Porting Drivers to the New Driver Model
+=======================================
+
+Patrick Mochel
+
+7 January 2003
+
+
+Overview
+
+Please refer to `Documentation/driver-api/driver-model/*.rst` for definitions of
+various driver types and concepts.
+
+Most of the work of porting devices drivers to the new model happens
+at the bus driver layer. This was intentional, to minimize the
+negative effect on kernel drivers, and to allow a gradual transition
+of bus drivers.
+
+In a nutshell, the driver model consists of a set of objects that can
+be embedded in larger, bus-specific objects. Fields in these generic
+objects can replace fields in the bus-specific objects.
+
+The generic objects must be registered with the driver model core. By
+doing so, they will exported via the sysfs filesystem. sysfs can be
+mounted by doing::
+
+ # mount -t sysfs sysfs /sys
+
+
+
+The Process
+
+Step 0: Read include/linux/device.h for object and function definitions.
+
+Step 1: Registering the bus driver.
+
+
+- Define a struct bus_type for the bus driver::
+
+ struct bus_type pci_bus_type = {
+ .name = "pci",
+ };
+
+
+- Register the bus type.
+
+ This should be done in the initialization function for the bus type,
+ which is usually the module_init(), or equivalent, function::
+
+ static int __init pci_driver_init(void)
+ {
+ return bus_register(&pci_bus_type);
+ }
+
+ subsys_initcall(pci_driver_init);
+
+
+ The bus type may be unregistered (if the bus driver may be compiled
+ as a module) by doing::
+
+ bus_unregister(&pci_bus_type);
+
+
+- Export the bus type for others to use.
+
+ Other code may wish to reference the bus type, so declare it in a
+ shared header file and export the symbol.
+
+From include/linux/pci.h::
+
+ extern struct bus_type pci_bus_type;
+
+
+From file the above code appears in::
+
+ EXPORT_SYMBOL(pci_bus_type);
+
+
+
+- This will cause the bus to show up in /sys/bus/pci/ with two
+ subdirectories: 'devices' and 'drivers'::
+
+ # tree -d /sys/bus/pci/
+ /sys/bus/pci/
+ |-- devices
+ `-- drivers
+
+
+
+Step 2: Registering Devices.
+
+struct device represents a single device. It mainly contains metadata
+describing the relationship the device has to other entities.
+
+
+- Embed a struct device in the bus-specific device type::
+
+
+ struct pci_dev {
+ ...
+ struct device dev; /* Generic device interface */
+ ...
+ };
+
+ It is recommended that the generic device not be the first item in
+ the struct to discourage programmers from doing mindless casts
+ between the object types. Instead macros, or inline functions,
+ should be created to convert from the generic object type::
+
+
+ #define to_pci_dev(n) container_of(n, struct pci_dev, dev)
+
+ or
+
+ static inline struct pci_dev * to_pci_dev(struct kobject * kobj)
+ {
+ return container_of(n, struct pci_dev, dev);
+ }
+
+ This allows the compiler to verify type-safety of the operations
+ that are performed (which is Good).
+
+
+- Initialize the device on registration.
+
+ When devices are discovered or registered with the bus type, the
+ bus driver should initialize the generic device. The most important
+ things to initialize are the bus_id, parent, and bus fields.
+
+ The bus_id is an ASCII string that contains the device's address on
+ the bus. The format of this string is bus-specific. This is
+ necessary for representing devices in sysfs.
+
+ parent is the physical parent of the device. It is important that
+ the bus driver sets this field correctly.
+
+ The driver model maintains an ordered list of devices that it uses
+ for power management. This list must be in order to guarantee that
+ devices are shutdown before their physical parents, and vice versa.
+ The order of this list is determined by the parent of registered
+ devices.
+
+ Also, the location of the device's sysfs directory depends on a
+ device's parent. sysfs exports a directory structure that mirrors
+ the device hierarchy. Accurately setting the parent guarantees that
+ sysfs will accurately represent the hierarchy.
+
+ The device's bus field is a pointer to the bus type the device
+ belongs to. This should be set to the bus_type that was declared
+ and initialized before.
+
+ Optionally, the bus driver may set the device's name and release
+ fields.
+
+ The name field is an ASCII string describing the device, like
+
+ "ATI Technologies Inc Radeon QD"
+
+ The release field is a callback that the driver model core calls
+ when the device has been removed, and all references to it have
+ been released. More on this in a moment.
+
+
+- Register the device.
+
+ Once the generic device has been initialized, it can be registered
+ with the driver model core by doing::
+
+ device_register(&dev->dev);
+
+ It can later be unregistered by doing::
+
+ device_unregister(&dev->dev);
+
+ This should happen on buses that support hotpluggable devices.
+ If a bus driver unregisters a device, it should not immediately free
+ it. It should instead wait for the driver model core to call the
+ device's release method, then free the bus-specific object.
+ (There may be other code that is currently referencing the device
+ structure, and it would be rude to free the device while that is
+ happening).
+
+
+ When the device is registered, a directory in sysfs is created.
+ The PCI tree in sysfs looks like::
+
+ /sys/devices/pci0/
+ |-- 00:00.0
+ |-- 00:01.0
+ | `-- 01:00.0
+ |-- 00:02.0
+ | `-- 02:1f.0
+ | `-- 03:00.0
+ |-- 00:1e.0
+ | `-- 04:04.0
+ |-- 00:1f.0
+ |-- 00:1f.1
+ | |-- ide0
+ | | |-- 0.0
+ | | `-- 0.1
+ | `-- ide1
+ | `-- 1.0
+ |-- 00:1f.2
+ |-- 00:1f.3
+ `-- 00:1f.5
+
+ Also, symlinks are created in the bus's 'devices' directory
+ that point to the device's directory in the physical hierarchy::
+
+ /sys/bus/pci/devices/
+ |-- 00:00.0 -> ../../../devices/pci0/00:00.0
+ |-- 00:01.0 -> ../../../devices/pci0/00:01.0
+ |-- 00:02.0 -> ../../../devices/pci0/00:02.0
+ |-- 00:1e.0 -> ../../../devices/pci0/00:1e.0
+ |-- 00:1f.0 -> ../../../devices/pci0/00:1f.0
+ |-- 00:1f.1 -> ../../../devices/pci0/00:1f.1
+ |-- 00:1f.2 -> ../../../devices/pci0/00:1f.2
+ |-- 00:1f.3 -> ../../../devices/pci0/00:1f.3
+ |-- 00:1f.5 -> ../../../devices/pci0/00:1f.5
+ |-- 01:00.0 -> ../../../devices/pci0/00:01.0/01:00.0
+ |-- 02:1f.0 -> ../../../devices/pci0/00:02.0/02:1f.0
+ |-- 03:00.0 -> ../../../devices/pci0/00:02.0/02:1f.0/03:00.0
+ `-- 04:04.0 -> ../../../devices/pci0/00:1e.0/04:04.0
+
+
+
+Step 3: Registering Drivers.
+
+struct device_driver is a simple driver structure that contains a set
+of operations that the driver model core may call.
+
+
+- Embed a struct device_driver in the bus-specific driver.
+
+ Just like with devices, do something like::
+
+ struct pci_driver {
+ ...
+ struct device_driver driver;
+ };
+
+
+- Initialize the generic driver structure.
+
+ When the driver registers with the bus (e.g. doing pci_register_driver()),
+ initialize the necessary fields of the driver: the name and bus
+ fields.
+
+
+- Register the driver.
+
+ After the generic driver has been initialized, call::
+
+ driver_register(&drv->driver);
+
+ to register the driver with the core.
+
+ When the driver is unregistered from the bus, unregister it from the
+ core by doing::
+
+ driver_unregister(&drv->driver);
+
+ Note that this will block until all references to the driver have
+ gone away. Normally, there will not be any.
+
+
+- Sysfs representation.
+
+ Drivers are exported via sysfs in their bus's 'driver's directory.
+ For example::
+
+ /sys/bus/pci/drivers/
+ |-- 3c59x
+ |-- Ensoniq AudioPCI
+ |-- agpgart-amdk7
+ |-- e100
+ `-- serial
+
+
+Step 4: Define Generic Methods for Drivers.
+
+struct device_driver defines a set of operations that the driver model
+core calls. Most of these operations are probably similar to
+operations the bus already defines for drivers, but taking different
+parameters.
+
+It would be difficult and tedious to force every driver on a bus to
+simultaneously convert their drivers to generic format. Instead, the
+bus driver should define single instances of the generic methods that
+forward call to the bus-specific drivers. For instance::
+
+
+ static int pci_device_remove(struct device * dev)
+ {
+ struct pci_dev * pci_dev = to_pci_dev(dev);
+ struct pci_driver * drv = pci_dev->driver;
+
+ if (drv) {
+ if (drv->remove)
+ drv->remove(pci_dev);
+ pci_dev->driver = NULL;
+ }
+ return 0;
+ }
+
+
+The generic driver should be initialized with these methods before it
+is registered::
+
+ /* initialize common driver fields */
+ drv->driver.name = drv->name;
+ drv->driver.bus = &pci_bus_type;
+ drv->driver.probe = pci_device_probe;
+ drv->driver.resume = pci_device_resume;
+ drv->driver.suspend = pci_device_suspend;
+ drv->driver.remove = pci_device_remove;
+
+ /* register with core */
+ driver_register(&drv->driver);
+
+
+Ideally, the bus should only initialize the fields if they are not
+already set. This allows the drivers to implement their own generic
+methods.
+
+
+Step 5: Support generic driver binding.
+
+The model assumes that a device or driver can be dynamically
+registered with the bus at any time. When registration happens,
+devices must be bound to a driver, or drivers must be bound to all
+devices that it supports.
+
+A driver typically contains a list of device IDs that it supports. The
+bus driver compares these IDs to the IDs of devices registered with it.
+The format of the device IDs, and the semantics for comparing them are
+bus-specific, so the generic model does attempt to generalize them.
+
+Instead, a bus may supply a method in struct bus_type that does the
+comparison::
+
+ int (*match)(struct device * dev, struct device_driver * drv);
+
+match should return positive value if the driver supports the device,
+and zero otherwise. It may also return error code (for example
+-EPROBE_DEFER) if determining that given driver supports the device is
+not possible.
+
+When a device is registered, the bus's list of drivers is iterated
+over. bus->match() is called for each one until a match is found.
+
+When a driver is registered, the bus's list of devices is iterated
+over. bus->match() is called for each device that is not already
+claimed by a driver.
+
+When a device is successfully bound to a driver, device->driver is
+set, the device is added to a per-driver list of devices, and a
+symlink is created in the driver's sysfs directory that points to the
+device's physical directory::
+
+ /sys/bus/pci/drivers/
+ |-- 3c59x
+ | `-- 00:0b.0 -> ../../../../devices/pci0/00:0b.0
+ |-- Ensoniq AudioPCI
+ |-- agpgart-amdk7
+ | `-- 00:00.0 -> ../../../../devices/pci0/00:00.0
+ |-- e100
+ | `-- 00:0c.0 -> ../../../../devices/pci0/00:0c.0
+ `-- serial
+
+
+This driver binding should replace the existing driver binding
+mechanism the bus currently uses.
+
+
+Step 6: Supply a hotplug callback.
+
+Whenever a device is registered with the driver model core, the
+userspace program /sbin/hotplug is called to notify userspace.
+Users can define actions to perform when a device is inserted or
+removed.
+
+The driver model core passes several arguments to userspace via
+environment variables, including
+
+- ACTION: set to 'add' or 'remove'
+- DEVPATH: set to the device's physical path in sysfs.
+
+A bus driver may also supply additional parameters for userspace to
+consume. To do this, a bus must implement the 'hotplug' method in
+struct bus_type::
+
+ int (*hotplug) (struct device *dev, char **envp,
+ int num_envp, char *buffer, int buffer_size);
+
+This is called immediately before /sbin/hotplug is executed.
+
+
+Step 7: Cleaning up the bus driver.
+
+The generic bus, device, and driver structures provide several fields
+that can replace those defined privately to the bus driver.
+
+- Device list.
+
+struct bus_type contains a list of all devices registered with the bus
+type. This includes all devices on all instances of that bus type.
+An internal list that the bus uses may be removed, in favor of using
+this one.
+
+The core provides an iterator to access these devices::
+
+ int bus_for_each_dev(struct bus_type * bus, struct device * start,
+ void * data, int (*fn)(struct device *, void *));
+
+
+- Driver list.
+
+struct bus_type also contains a list of all drivers registered with
+it. An internal list of drivers that the bus driver maintains may
+be removed in favor of using the generic one.
+
+The drivers may be iterated over, like devices::
+
+ int bus_for_each_drv(struct bus_type * bus, struct device_driver * start,
+ void * data, int (*fn)(struct device_driver *, void *));
+
+
+Please see drivers/base/bus.c for more information.
+
+
+- rwsem
+
+struct bus_type contains an rwsem that protects all core accesses to
+the device and driver lists. This can be used by the bus driver
+internally, and should be used when accessing the device or driver
+lists the bus maintains.
+
+
+- Device and driver fields.
+
+Some of the fields in struct device and struct device_driver duplicate
+fields in the bus-specific representations of these objects. Feel free
+to remove the bus-specific ones and favor the generic ones. Note
+though, that this will likely mean fixing up all the drivers that
+reference the bus-specific fields (though those should all be 1-line
+changes).
diff --git a/Documentation/driver-api/early-userspace/buffer-format.rst b/Documentation/driver-api/early-userspace/buffer-format.rst
new file mode 100644
index 000000000000..7f74e301fdf3
--- /dev/null
+++ b/Documentation/driver-api/early-userspace/buffer-format.rst
@@ -0,0 +1,119 @@
+=======================
+initramfs buffer format
+=======================
+
+Al Viro, H. Peter Anvin
+
+Last revision: 2002-01-13
+
+Starting with kernel 2.5.x, the old "initial ramdisk" protocol is
+getting {replaced/complemented} with the new "initial ramfs"
+(initramfs) protocol. The initramfs contents is passed using the same
+memory buffer protocol used by the initrd protocol, but the contents
+is different. The initramfs buffer contains an archive which is
+expanded into a ramfs filesystem; this document details the format of
+the initramfs buffer format.
+
+The initramfs buffer format is based around the "newc" or "crc" CPIO
+formats, and can be created with the cpio(1) utility. The cpio
+archive can be compressed using gzip(1). One valid version of an
+initramfs buffer is thus a single .cpio.gz file.
+
+The full format of the initramfs buffer is defined by the following
+grammar, where::
+
+ * is used to indicate "0 or more occurrences of"
+ (|) indicates alternatives
+ + indicates concatenation
+ GZIP() indicates the gzip(1) of the operand
+ ALGN(n) means padding with null bytes to an n-byte boundary
+
+ initramfs := ("\0" | cpio_archive | cpio_gzip_archive)*
+
+ cpio_gzip_archive := GZIP(cpio_archive)
+
+ cpio_archive := cpio_file* + (<nothing> | cpio_trailer)
+
+ cpio_file := ALGN(4) + cpio_header + filename + "\0" + ALGN(4) + data
+
+ cpio_trailer := ALGN(4) + cpio_header + "TRAILER!!!\0" + ALGN(4)
+
+
+In human terms, the initramfs buffer contains a collection of
+compressed and/or uncompressed cpio archives (in the "newc" or "crc"
+formats); arbitrary amounts zero bytes (for padding) can be added
+between members.
+
+The cpio "TRAILER!!!" entry (cpio end-of-archive) is optional, but is
+not ignored; see "handling of hard links" below.
+
+The structure of the cpio_header is as follows (all fields contain
+hexadecimal ASCII numbers fully padded with '0' on the left to the
+full width of the field, for example, the integer 4780 is represented
+by the ASCII string "000012ac"):
+
+============= ================== ==============================================
+Field name Field size Meaning
+============= ================== ==============================================
+c_magic 6 bytes The string "070701" or "070702"
+c_ino 8 bytes File inode number
+c_mode 8 bytes File mode and permissions
+c_uid 8 bytes File uid
+c_gid 8 bytes File gid
+c_nlink 8 bytes Number of links
+c_mtime 8 bytes Modification time
+c_filesize 8 bytes Size of data field
+c_maj 8 bytes Major part of file device number
+c_min 8 bytes Minor part of file device number
+c_rmaj 8 bytes Major part of device node reference
+c_rmin 8 bytes Minor part of device node reference
+c_namesize 8 bytes Length of filename, including final \0
+c_chksum 8 bytes Checksum of data field if c_magic is 070702;
+ otherwise zero
+============= ================== ==============================================
+
+The c_mode field matches the contents of st_mode returned by stat(2)
+on Linux, and encodes the file type and file permissions.
+
+The c_filesize should be zero for any file which is not a regular file
+or symlink.
+
+The c_chksum field contains a simple 32-bit unsigned sum of all the
+bytes in the data field. cpio(1) refers to this as "crc", which is
+clearly incorrect (a cyclic redundancy check is a different and
+significantly stronger integrity check), however, this is the
+algorithm used.
+
+If the filename is "TRAILER!!!" this is actually an end-of-archive
+marker; the c_filesize for an end-of-archive marker must be zero.
+
+
+Handling of hard links
+======================
+
+When a nondirectory with c_nlink > 1 is seen, the (c_maj,c_min,c_ino)
+tuple is looked up in a tuple buffer. If not found, it is entered in
+the tuple buffer and the entry is created as usual; if found, a hard
+link rather than a second copy of the file is created. It is not
+necessary (but permitted) to include a second copy of the file
+contents; if the file contents is not included, the c_filesize field
+should be set to zero to indicate no data section follows. If data is
+present, the previous instance of the file is overwritten; this allows
+the data-carrying instance of a file to occur anywhere in the sequence
+(GNU cpio is reported to attach the data to the last instance of a
+file only.)
+
+c_filesize must not be zero for a symlink.
+
+When a "TRAILER!!!" end-of-archive marker is seen, the tuple buffer is
+reset. This permits archives which are generated independently to be
+concatenated.
+
+To combine file data from different sources (without having to
+regenerate the (c_maj,c_min,c_ino) fields), therefore, either one of
+the following techniques can be used:
+
+a) Separate the different file data sources with a "TRAILER!!!"
+ end-of-archive marker, or
+
+b) Make sure c_nlink == 1 for all nondirectory entries.
diff --git a/Documentation/driver-api/early-userspace/early_userspace_support.rst b/Documentation/driver-api/early-userspace/early_userspace_support.rst
new file mode 100644
index 000000000000..3deefb34046b
--- /dev/null
+++ b/Documentation/driver-api/early-userspace/early_userspace_support.rst
@@ -0,0 +1,154 @@
+=======================
+Early userspace support
+=======================
+
+Last update: 2004-12-20 tlh
+
+
+"Early userspace" is a set of libraries and programs that provide
+various pieces of functionality that are important enough to be
+available while a Linux kernel is coming up, but that don't need to be
+run inside the kernel itself.
+
+It consists of several major infrastructure components:
+
+- gen_init_cpio, a program that builds a cpio-format archive
+ containing a root filesystem image. This archive is compressed, and
+ the compressed image is linked into the kernel image.
+- initramfs, a chunk of code that unpacks the compressed cpio image
+ midway through the kernel boot process.
+- klibc, a userspace C library, currently packaged separately, that is
+ optimized for correctness and small size.
+
+The cpio file format used by initramfs is the "newc" (aka "cpio -H newc")
+format, and is documented in the file "buffer-format.txt". There are
+two ways to add an early userspace image: specify an existing cpio
+archive to be used as the image or have the kernel build process build
+the image from specifications.
+
+CPIO ARCHIVE method
+-------------------
+
+You can create a cpio archive that contains the early userspace image.
+Your cpio archive should be specified in CONFIG_INITRAMFS_SOURCE and it
+will be used directly. Only a single cpio file may be specified in
+CONFIG_INITRAMFS_SOURCE and directory and file names are not allowed in
+combination with a cpio archive.
+
+IMAGE BUILDING method
+---------------------
+
+The kernel build process can also build an early userspace image from
+source parts rather than supplying a cpio archive. This method provides
+a way to create images with root-owned files even though the image was
+built by an unprivileged user.
+
+The image is specified as one or more sources in
+CONFIG_INITRAMFS_SOURCE. Sources can be either directories or files -
+cpio archives are *not* allowed when building from sources.
+
+A source directory will have it and all of its contents packaged. The
+specified directory name will be mapped to '/'. When packaging a
+directory, limited user and group ID translation can be performed.
+INITRAMFS_ROOT_UID can be set to a user ID that needs to be mapped to
+user root (0). INITRAMFS_ROOT_GID can be set to a group ID that needs
+to be mapped to group root (0).
+
+A source file must be directives in the format required by the
+usr/gen_init_cpio utility (run 'usr/gen_init_cpio -h' to get the
+file format). The directives in the file will be passed directly to
+usr/gen_init_cpio.
+
+When a combination of directories and files are specified then the
+initramfs image will be an aggregate of all of them. In this way a user
+can create a 'root-image' directory and install all files into it.
+Because device-special files cannot be created by a unprivileged user,
+special files can be listed in a 'root-files' file. Both 'root-image'
+and 'root-files' can be listed in CONFIG_INITRAMFS_SOURCE and a complete
+early userspace image can be built by an unprivileged user.
+
+As a technical note, when directories and files are specified, the
+entire CONFIG_INITRAMFS_SOURCE is passed to
+usr/gen_initramfs_list.sh. This means that CONFIG_INITRAMFS_SOURCE
+can really be interpreted as any legal argument to
+gen_initramfs_list.sh. If a directory is specified as an argument then
+the contents are scanned, uid/gid translation is performed, and
+usr/gen_init_cpio file directives are output. If a directory is
+specified as an argument to usr/gen_initramfs_list.sh then the
+contents of the file are simply copied to the output. All of the output
+directives from directory scanning and file contents copying are
+processed by usr/gen_init_cpio.
+
+See also 'usr/gen_initramfs_list.sh -h'.
+
+Where's this all leading?
+=========================
+
+The klibc distribution contains some of the necessary software to make
+early userspace useful. The klibc distribution is currently
+maintained separately from the kernel.
+
+You can obtain somewhat infrequent snapshots of klibc from
+https://www.kernel.org/pub/linux/libs/klibc/
+
+For active users, you are better off using the klibc git
+repository, at http://git.kernel.org/?p=libs/klibc/klibc.git
+
+The standalone klibc distribution currently provides three components,
+in addition to the klibc library:
+
+- ipconfig, a program that configures network interfaces. It can
+ configure them statically, or use DHCP to obtain information
+ dynamically (aka "IP autoconfiguration").
+- nfsmount, a program that can mount an NFS filesystem.
+- kinit, the "glue" that uses ipconfig and nfsmount to replace the old
+ support for IP autoconfig, mount a filesystem over NFS, and continue
+ system boot using that filesystem as root.
+
+kinit is built as a single statically linked binary to save space.
+
+Eventually, several more chunks of kernel functionality will hopefully
+move to early userspace:
+
+- Almost all of init/do_mounts* (the beginning of this is already in
+ place)
+- ACPI table parsing
+- Insert unwieldy subsystem that doesn't really need to be in kernel
+ space here
+
+If kinit doesn't meet your current needs and you've got bytes to burn,
+the klibc distribution includes a small Bourne-compatible shell (ash)
+and a number of other utilities, so you can replace kinit and build
+custom initramfs images that meet your needs exactly.
+
+For questions and help, you can sign up for the early userspace
+mailing list at http://www.zytor.com/mailman/listinfo/klibc
+
+How does it work?
+=================
+
+The kernel has currently 3 ways to mount the root filesystem:
+
+a) all required device and filesystem drivers compiled into the kernel, no
+ initrd. init/main.c:init() will call prepare_namespace() to mount the
+ final root filesystem, based on the root= option and optional init= to run
+ some other init binary than listed at the end of init/main.c:init().
+
+b) some device and filesystem drivers built as modules and stored in an
+ initrd. The initrd must contain a binary '/linuxrc' which is supposed to
+ load these driver modules. It is also possible to mount the final root
+ filesystem via linuxrc and use the pivot_root syscall. The initrd is
+ mounted and executed via prepare_namespace().
+
+c) using initramfs. The call to prepare_namespace() must be skipped.
+ This means that a binary must do all the work. Said binary can be stored
+ into initramfs either via modifying usr/gen_init_cpio.c or via the new
+ initrd format, an cpio archive. It must be called "/init". This binary
+ is responsible to do all the things prepare_namespace() would do.
+
+ To maintain backwards compatibility, the /init binary will only run if it
+ comes via an initramfs cpio archive. If this is not the case,
+ init/main.c:init() will run prepare_namespace() to mount the final root
+ and exec one of the predefined init binaries.
+
+Bryan O'Sullivan <bos@serpentine.com>
diff --git a/Documentation/driver-api/early-userspace/index.rst b/Documentation/driver-api/early-userspace/index.rst
new file mode 100644
index 000000000000..149c1822f06d
--- /dev/null
+++ b/Documentation/driver-api/early-userspace/index.rst
@@ -0,0 +1,18 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+===============
+Early Userspace
+===============
+
+.. toctree::
+ :maxdepth: 1
+
+ early_userspace_support
+ buffer-format
+
+.. only:: subproject and html
+
+ Indices
+ =======
+
+ * :ref:`genindex`
diff --git a/Documentation/driver-api/edid.rst b/Documentation/driver-api/edid.rst
new file mode 100644
index 000000000000..b1b5acd501ed
--- /dev/null
+++ b/Documentation/driver-api/edid.rst
@@ -0,0 +1,58 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+====
+EDID
+====
+
+In the good old days when graphics parameters were configured explicitly
+in a file called xorg.conf, even broken hardware could be managed.
+
+Today, with the advent of Kernel Mode Setting, a graphics board is
+either correctly working because all components follow the standards -
+or the computer is unusable, because the screen remains dark after
+booting or it displays the wrong area. Cases when this happens are:
+- The graphics board does not recognize the monitor.
+- The graphics board is unable to detect any EDID data.
+- The graphics board incorrectly forwards EDID data to the driver.
+- The monitor sends no or bogus EDID data.
+- A KVM sends its own EDID data instead of querying the connected monitor.
+Adding the kernel parameter "nomodeset" helps in most cases, but causes
+restrictions later on.
+
+As a remedy for such situations, the kernel configuration item
+CONFIG_DRM_LOAD_EDID_FIRMWARE was introduced. It allows to provide an
+individually prepared or corrected EDID data set in the /lib/firmware
+directory from where it is loaded via the firmware interface. The code
+(see drivers/gpu/drm/drm_edid_load.c) contains built-in data sets for
+commonly used screen resolutions (800x600, 1024x768, 1280x1024, 1600x1200,
+1680x1050, 1920x1080) as binary blobs, but the kernel source tree does
+not contain code to create these data. In order to elucidate the origin
+of the built-in binary EDID blobs and to facilitate the creation of
+individual data for a specific misbehaving monitor, commented sources
+and a Makefile environment are given here.
+
+To create binary EDID and C source code files from the existing data
+material, simply type "make".
+
+If you want to create your own EDID file, copy the file 1024x768.S,
+replace the settings with your own data and add a new target to the
+Makefile. Please note that the EDID data structure expects the timing
+values in a different way as compared to the standard X11 format.
+
+X11:
+ HTimings:
+ hdisp hsyncstart hsyncend htotal
+ VTimings:
+ vdisp vsyncstart vsyncend vtotal
+
+EDID::
+
+ #define XPIX hdisp
+ #define XBLANK htotal-hdisp
+ #define XOFFSET hsyncstart-hdisp
+ #define XPULSE hsyncend-hsyncstart
+
+ #define YPIX vdisp
+ #define YBLANK vtotal-vdisp
+ #define YOFFSET vsyncstart-vdisp
+ #define YPULSE vsyncend-vsyncstart
diff --git a/Documentation/driver-api/eisa.rst b/Documentation/driver-api/eisa.rst
new file mode 100644
index 000000000000..c07565ba57da
--- /dev/null
+++ b/Documentation/driver-api/eisa.rst
@@ -0,0 +1,230 @@
+================
+EISA bus support
+================
+
+:Author: Marc Zyngier <maz@wild-wind.fr.eu.org>
+
+This document groups random notes about porting EISA drivers to the
+new EISA/sysfs API.
+
+Starting from version 2.5.59, the EISA bus is almost given the same
+status as other much more mainstream busses such as PCI or USB. This
+has been possible through sysfs, which defines a nice enough set of
+abstractions to manage busses, devices and drivers.
+
+Although the new API is quite simple to use, converting existing
+drivers to the new infrastructure is not an easy task (mostly because
+detection code is generally also used to probe ISA cards). Moreover,
+most EISA drivers are among the oldest Linux drivers so, as you can
+imagine, some dust has settled here over the years.
+
+The EISA infrastructure is made up of three parts:
+
+ - The bus code implements most of the generic code. It is shared
+ among all the architectures that the EISA code runs on. It
+ implements bus probing (detecting EISA cards available on the bus),
+ allocates I/O resources, allows fancy naming through sysfs, and
+ offers interfaces for driver to register.
+
+ - The bus root driver implements the glue between the bus hardware
+ and the generic bus code. It is responsible for discovering the
+ device implementing the bus, and setting it up to be latter probed
+ by the bus code. This can go from something as simple as reserving
+ an I/O region on x86, to the rather more complex, like the hppa
+ EISA code. This is the part to implement in order to have EISA
+ running on an "new" platform.
+
+ - The driver offers the bus a list of devices that it manages, and
+ implements the necessary callbacks to probe and release devices
+ whenever told to.
+
+Every function/structure below lives in <linux/eisa.h>, which depends
+heavily on <linux/device.h>.
+
+Bus root driver
+===============
+
+::
+
+ int eisa_root_register (struct eisa_root_device *root);
+
+The eisa_root_register function is used to declare a device as the
+root of an EISA bus. The eisa_root_device structure holds a reference
+to this device, as well as some parameters for probing purposes::
+
+ struct eisa_root_device {
+ struct device *dev; /* Pointer to bridge device */
+ struct resource *res;
+ unsigned long bus_base_addr;
+ int slots; /* Max slot number */
+ int force_probe; /* Probe even when no slot 0 */
+ u64 dma_mask; /* from bridge device */
+ int bus_nr; /* Set by eisa_root_register */
+ struct resource eisa_root_res; /* ditto */
+ };
+
+============= ======================================================
+node used for eisa_root_register internal purpose
+dev pointer to the root device
+res root device I/O resource
+bus_base_addr slot 0 address on this bus
+slots max slot number to probe
+force_probe Probe even when slot 0 is empty (no EISA mainboard)
+dma_mask Default DMA mask. Usually the bridge device dma_mask.
+bus_nr unique bus id, set by eisa_root_register
+============= ======================================================
+
+Driver
+======
+
+::
+
+ int eisa_driver_register (struct eisa_driver *edrv);
+ void eisa_driver_unregister (struct eisa_driver *edrv);
+
+Clear enough ?
+
+::
+
+ struct eisa_device_id {
+ char sig[EISA_SIG_LEN];
+ unsigned long driver_data;
+ };
+
+ struct eisa_driver {
+ const struct eisa_device_id *id_table;
+ struct device_driver driver;
+ };
+
+=============== ====================================================
+id_table an array of NULL terminated EISA id strings,
+ followed by an empty string. Each string can
+ optionally be paired with a driver-dependent value
+ (driver_data).
+
+driver a generic driver, such as described in
+ Documentation/driver-api/driver-model/driver.rst. Only .name,
+ .probe and .remove members are mandatory.
+=============== ====================================================
+
+An example is the 3c59x driver::
+
+ static struct eisa_device_id vortex_eisa_ids[] = {
+ { "TCM5920", EISA_3C592_OFFSET },
+ { "TCM5970", EISA_3C597_OFFSET },
+ { "" }
+ };
+
+ static struct eisa_driver vortex_eisa_driver = {
+ .id_table = vortex_eisa_ids,
+ .driver = {
+ .name = "3c59x",
+ .probe = vortex_eisa_probe,
+ .remove = vortex_eisa_remove
+ }
+ };
+
+Device
+======
+
+The sysfs framework calls .probe and .remove functions upon device
+discovery and removal (note that the .remove function is only called
+when driver is built as a module).
+
+Both functions are passed a pointer to a 'struct device', which is
+encapsulated in a 'struct eisa_device' described as follows::
+
+ struct eisa_device {
+ struct eisa_device_id id;
+ int slot;
+ int state;
+ unsigned long base_addr;
+ struct resource res[EISA_MAX_RESOURCES];
+ u64 dma_mask;
+ struct device dev; /* generic device */
+ };
+
+======== ============================================================
+id EISA id, as read from device. id.driver_data is set from the
+ matching driver EISA id.
+slot slot number which the device was detected on
+state set of flags indicating the state of the device. Current
+ flags are EISA_CONFIG_ENABLED and EISA_CONFIG_FORCED.
+res set of four 256 bytes I/O regions allocated to this device
+dma_mask DMA mask set from the parent device.
+dev generic device (see Documentation/driver-api/driver-model/device.rst)
+======== ============================================================
+
+You can get the 'struct eisa_device' from 'struct device' using the
+'to_eisa_device' macro.
+
+Misc stuff
+==========
+
+::
+
+ void eisa_set_drvdata (struct eisa_device *edev, void *data);
+
+Stores data into the device's driver_data area.
+
+::
+
+ void *eisa_get_drvdata (struct eisa_device *edev):
+
+Gets the pointer previously stored into the device's driver_data area.
+
+::
+
+ int eisa_get_region_index (void *addr);
+
+Returns the region number (0 <= x < EISA_MAX_RESOURCES) of a given
+address.
+
+Kernel parameters
+=================
+
+eisa_bus.enable_dev
+ A comma-separated list of slots to be enabled, even if the firmware
+ set the card as disabled. The driver must be able to properly
+ initialize the device in such conditions.
+
+eisa_bus.disable_dev
+ A comma-separated list of slots to be enabled, even if the firmware
+ set the card as enabled. The driver won't be called to handle this
+ device.
+
+virtual_root.force_probe
+ Force the probing code to probe EISA slots even when it cannot find an
+ EISA compliant mainboard (nothing appears on slot 0). Defaults to 0
+ (don't force), and set to 1 (force probing) when either
+ CONFIG_ALPHA_JENSEN or CONFIG_EISA_VLB_PRIMING are set.
+
+Random notes
+============
+
+Converting an EISA driver to the new API mostly involves *deleting*
+code (since probing is now in the core EISA code). Unfortunately, most
+drivers share their probing routine between ISA, and EISA. Special
+care must be taken when ripping out the EISA code, so other busses
+won't suffer from these surgical strikes...
+
+You *must not* expect any EISA device to be detected when returning
+from eisa_driver_register, since the chances are that the bus has not
+yet been probed. In fact, that's what happens most of the time (the
+bus root driver usually kicks in rather late in the boot process).
+Unfortunately, most drivers are doing the probing by themselves, and
+expect to have explored the whole machine when they exit their probe
+routine.
+
+For example, switching your favorite EISA SCSI card to the "hotplug"
+model is "the right thing"(tm).
+
+Thanks
+======
+
+I'd like to thank the following people for their help:
+
+- Xavier Benigni for lending me a wonderful Alpha Jensen,
+- James Bottomley, Jeff Garzik for getting this stuff into the kernel,
+- Andries Brouwer for contributing numerous EISA ids,
+- Catrin Jones for coping with far too many machines at home.
diff --git a/Documentation/driver-api/gpio/driver.rst b/Documentation/driver-api/gpio/driver.rst
index 349f2dc33029..921c71a3d683 100644
--- a/Documentation/driver-api/gpio/driver.rst
+++ b/Documentation/driver-api/gpio/driver.rst
@@ -399,7 +399,7 @@ symbol:
will pass the struct gpio_chip* for the chip to all IRQ callbacks, so the
callbacks need to embed the gpio_chip in its state container and obtain a
pointer to the container using container_of().
- (See Documentation/driver-model/design-patterns.rst)
+ (See Documentation/driver-api/driver-model/design-patterns.rst)
- gpiochip_irqchip_add_nested(): adds a nested cascaded irqchip to a gpiochip,
as discussed above regarding different types of cascaded irqchips. The
diff --git a/Documentation/driver-api/index.rst b/Documentation/driver-api/index.rst
index 6cd750a03ea0..d12a80f386a6 100644
--- a/Documentation/driver-api/index.rst
+++ b/Documentation/driver-api/index.rst
@@ -14,8 +14,10 @@ available subsections can be seen below.
.. toctree::
:maxdepth: 2
+ driver-model/index
basics
infrastructure
+ early-userspace/index
pm/index
clk
device-io
@@ -36,6 +38,7 @@ available subsections can be seen below.
i2c
ipmb
i3c/index
+ interconnect
hsi
edac
scsi
@@ -44,8 +47,11 @@ available subsections can be seen below.
mtdnand
miscellaneous
mei/index
+ mtd/index
+ mmc/index
+ nvdimm/index
w1
- rapidio
+ rapidio/index
s390-drivers
vme
80211/index
@@ -53,13 +59,48 @@ available subsections can be seen below.
firmware/index
pinctl
gpio/index
+ md/index
misc_devices
+ nfc/index
dmaengine/index
slimbus
soundwire/index
fpga/index
acpi/index
+ backlight/lp855x-driver.rst
+ bt8xxgpio
+ connector
+ console
+ dcdbas
+ dell_rbu
+ edid
+ eisa
+ isa
+ isapnp
generic-counter
+ lightnvm-pblk
+ memory-devices/index
+ men-chameleon-bus
+ ntb
+ nvmem
+ parport-lowlevel
+ pps
+ ptp
+ phy/index
+ pti_intel_mid
+ pwm
+ rfkill
+ serial/index
+ sgi-ioc4
+ sm501
+ smsc_ece1099
+ switchtec
+ sync_file
+ vfio-mediated-device
+ vfio
+ xilinx/index
+ xillybus
+ zorro
.. only:: subproject and html
diff --git a/Documentation/driver-api/interconnect.rst b/Documentation/driver-api/interconnect.rst
new file mode 100644
index 000000000000..c3e004893796
--- /dev/null
+++ b/Documentation/driver-api/interconnect.rst
@@ -0,0 +1,93 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=====================================
+GENERIC SYSTEM INTERCONNECT SUBSYSTEM
+=====================================
+
+Introduction
+------------
+
+This framework is designed to provide a standard kernel interface to control
+the settings of the interconnects on an SoC. These settings can be throughput,
+latency and priority between multiple interconnected devices or functional
+blocks. This can be controlled dynamically in order to save power or provide
+maximum performance.
+
+The interconnect bus is hardware with configurable parameters, which can be
+set on a data path according to the requests received from various drivers.
+An example of interconnect buses are the interconnects between various
+components or functional blocks in chipsets. There can be multiple interconnects
+on an SoC that can be multi-tiered.
+
+Below is a simplified diagram of a real-world SoC interconnect bus topology.
+
+::
+
+ +----------------+ +----------------+
+ | HW Accelerator |--->| M NoC |<---------------+
+ +----------------+ +----------------+ |
+ | | +------------+
+ +-----+ +-------------+ V +------+ | |
+ | DDR | | +--------+ | PCIe | | |
+ +-----+ | | Slaves | +------+ | |
+ ^ ^ | +--------+ | | C NoC |
+ | | V V | |
+ +------------------+ +------------------------+ | | +-----+
+ | |-->| |-->| |-->| CPU |
+ | |-->| |<--| | +-----+
+ | Mem NoC | | S NoC | +------------+
+ | |<--| |---------+ |
+ | |<--| |<------+ | | +--------+
+ +------------------+ +------------------------+ | | +-->| Slaves |
+ ^ ^ ^ ^ ^ | | +--------+
+ | | | | | | V
+ +------+ | +-----+ +-----+ +---------+ +----------------+ +--------+
+ | CPUs | | | GPU | | DSP | | Masters |-->| P NoC |-->| Slaves |
+ +------+ | +-----+ +-----+ +---------+ +----------------+ +--------+
+ |
+ +-------+
+ | Modem |
+ +-------+
+
+Terminology
+-----------
+
+Interconnect provider is the software definition of the interconnect hardware.
+The interconnect providers on the above diagram are M NoC, S NoC, C NoC, P NoC
+and Mem NoC.
+
+Interconnect node is the software definition of the interconnect hardware
+port. Each interconnect provider consists of multiple interconnect nodes,
+which are connected to other SoC components including other interconnect
+providers. The point on the diagram where the CPUs connect to the memory is
+called an interconnect node, which belongs to the Mem NoC interconnect provider.
+
+Interconnect endpoints are the first or the last element of the path. Every
+endpoint is a node, but not every node is an endpoint.
+
+Interconnect path is everything between two endpoints including all the nodes
+that have to be traversed to reach from a source to destination node. It may
+include multiple master-slave pairs across several interconnect providers.
+
+Interconnect consumers are the entities which make use of the data paths exposed
+by the providers. The consumers send requests to providers requesting various
+throughput, latency and priority. Usually the consumers are device drivers, that
+send request based on their needs. An example for a consumer is a video decoder
+that supports various formats and image sizes.
+
+Interconnect providers
+----------------------
+
+Interconnect provider is an entity that implements methods to initialize and
+configure interconnect bus hardware. The interconnect provider drivers should
+be registered with the interconnect provider core.
+
+.. kernel-doc:: include/linux/interconnect-provider.h
+
+Interconnect consumers
+----------------------
+
+Interconnect consumers are the clients which use the interconnect APIs to
+get paths between endpoints and set their bandwidth/latency/QoS requirements
+for these interconnect paths. These interfaces are not currently
+documented.
diff --git a/Documentation/driver-api/isa.rst b/Documentation/driver-api/isa.rst
new file mode 100644
index 000000000000..def4a7b690b5
--- /dev/null
+++ b/Documentation/driver-api/isa.rst
@@ -0,0 +1,122 @@
+===========
+ISA Drivers
+===========
+
+The following text is adapted from the commit message of the initial
+commit of the ISA bus driver authored by Rene Herman.
+
+During the recent "isa drivers using platform devices" discussion it was
+pointed out that (ALSA) ISA drivers ran into the problem of not having
+the option to fail driver load (device registration rather) upon not
+finding their hardware due to a probe() error not being passed up
+through the driver model. In the course of that, I suggested a separate
+ISA bus might be best; Russell King agreed and suggested this bus could
+use the .match() method for the actual device discovery.
+
+The attached does this. For this old non (generically) discoverable ISA
+hardware only the driver itself can do discovery so as a difference with
+the platform_bus, this isa_bus also distributes match() up to the
+driver.
+
+As another difference: these devices only exist in the driver model due
+to the driver creating them because it might want to drive them, meaning
+that all device creation has been made internal as well.
+
+The usage model this provides is nice, and has been acked from the ALSA
+side by Takashi Iwai and Jaroslav Kysela. The ALSA driver module_init's
+now (for oldisa-only drivers) become::
+
+ static int __init alsa_card_foo_init(void)
+ {
+ return isa_register_driver(&snd_foo_isa_driver, SNDRV_CARDS);
+ }
+
+ static void __exit alsa_card_foo_exit(void)
+ {
+ isa_unregister_driver(&snd_foo_isa_driver);
+ }
+
+Quite like the other bus models therefore. This removes a lot of
+duplicated init code from the ALSA ISA drivers.
+
+The passed in isa_driver struct is the regular driver struct embedding a
+struct device_driver, the normal probe/remove/shutdown/suspend/resume
+callbacks, and as indicated that .match callback.
+
+The "SNDRV_CARDS" you see being passed in is a "unsigned int ndev"
+parameter, indicating how many devices to create and call our methods
+with.
+
+The platform_driver callbacks are called with a platform_device param;
+the isa_driver callbacks are being called with a ``struct device *dev,
+unsigned int id`` pair directly -- with the device creation completely
+internal to the bus it's much cleaner to not leak isa_dev's by passing
+them in at all. The id is the only thing we ever want other then the
+struct device anyways, and it makes for nicer code in the callbacks as
+well.
+
+With this additional .match() callback ISA drivers have all options. If
+ALSA would want to keep the old non-load behaviour, it could stick all
+of the old .probe in .match, which would only keep them registered after
+everything was found to be present and accounted for. If it wanted the
+behaviour of always loading as it inadvertently did for a bit after the
+changeover to platform devices, it could just not provide a .match() and
+do everything in .probe() as before.
+
+If it, as Takashi Iwai already suggested earlier as a way of following
+the model from saner buses more closely, wants to load when a later bind
+could conceivably succeed, it could use .match() for the prerequisites
+(such as checking the user wants the card enabled and that port/irq/dma
+values have been passed in) and .probe() for everything else. This is
+the nicest model.
+
+To the code...
+
+This exports only two functions; isa_{,un}register_driver().
+
+isa_register_driver() register's the struct device_driver, and then
+loops over the passed in ndev creating devices and registering them.
+This causes the bus match method to be called for them, which is::
+
+ int isa_bus_match(struct device *dev, struct device_driver *driver)
+ {
+ struct isa_driver *isa_driver = to_isa_driver(driver);
+
+ if (dev->platform_data == isa_driver) {
+ if (!isa_driver->match ||
+ isa_driver->match(dev, to_isa_dev(dev)->id))
+ return 1;
+ dev->platform_data = NULL;
+ }
+ return 0;
+ }
+
+The first thing this does is check if this device is in fact one of this
+driver's devices by seeing if the device's platform_data pointer is set
+to this driver. Platform devices compare strings, but we don't need to
+do that with everything being internal, so isa_register_driver() abuses
+dev->platform_data as a isa_driver pointer which we can then check here.
+I believe platform_data is available for this, but if rather not, moving
+the isa_driver pointer to the private struct isa_dev is ofcourse fine as
+well.
+
+Then, if the the driver did not provide a .match, it matches. If it did,
+the driver match() method is called to determine a match.
+
+If it did **not** match, dev->platform_data is reset to indicate this to
+isa_register_driver which can then unregister the device again.
+
+If during all this, there's any error, or no devices matched at all
+everything is backed out again and the error, or -ENODEV, is returned.
+
+isa_unregister_driver() just unregisters the matched devices and the
+driver itself.
+
+module_isa_driver is a helper macro for ISA drivers which do not do
+anything special in module init/exit. This eliminates a lot of
+boilerplate code. Each module may only use this macro once, and calling
+it replaces module_init and module_exit.
+
+max_num_isa_dev is a macro to determine the maximum possible number of
+ISA devices which may be registered in the I/O port address space given
+the address extent of the ISA devices.
diff --git a/Documentation/driver-api/isapnp.rst b/Documentation/driver-api/isapnp.rst
new file mode 100644
index 000000000000..8d0840ac847b
--- /dev/null
+++ b/Documentation/driver-api/isapnp.rst
@@ -0,0 +1,15 @@
+==========================================================
+ISA Plug & Play support by Jaroslav Kysela <perex@suse.cz>
+==========================================================
+
+Interface /proc/isapnp
+======================
+
+The interface has been removed. See pnp.txt for more details.
+
+Interface /proc/bus/isapnp
+==========================
+
+This directory allows access to ISA PnP cards and logical devices.
+The regular files contain the contents of ISA PnP registers for
+a logical device.
diff --git a/Documentation/driver-api/lightnvm-pblk.rst b/Documentation/driver-api/lightnvm-pblk.rst
new file mode 100644
index 000000000000..1040ed1cec81
--- /dev/null
+++ b/Documentation/driver-api/lightnvm-pblk.rst
@@ -0,0 +1,21 @@
+pblk: Physical Block Device Target
+==================================
+
+pblk implements a fully associative, host-based FTL that exposes a traditional
+block I/O interface. Its primary responsibilities are:
+
+ - Map logical addresses onto physical addresses (4KB granularity) in a
+ logical-to-physical (L2P) table.
+ - Maintain the integrity and consistency of the L2P table as well as its
+ recovery from normal tear down and power outage.
+ - Deal with controller- and media-specific constrains.
+ - Handle I/O errors.
+ - Implement garbage collection.
+ - Maintain consistency across the I/O stack during synchronization points.
+
+For more information please refer to:
+
+ http://lightnvm.io
+
+which maintains updated FAQs, manual pages, technical documentation, tools,
+contacts, etc.
diff --git a/Documentation/driver-api/md/index.rst b/Documentation/driver-api/md/index.rst
new file mode 100644
index 000000000000..18f54a7d7d6e
--- /dev/null
+++ b/Documentation/driver-api/md/index.rst
@@ -0,0 +1,12 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+====
+RAID
+====
+
+.. toctree::
+ :maxdepth: 1
+
+ md-cluster
+ raid5-cache
+ raid5-ppl
diff --git a/Documentation/driver-api/md/md-cluster.rst b/Documentation/driver-api/md/md-cluster.rst
new file mode 100644
index 000000000000..96eb52cec7eb
--- /dev/null
+++ b/Documentation/driver-api/md/md-cluster.rst
@@ -0,0 +1,385 @@
+==========
+MD Cluster
+==========
+
+The cluster MD is a shared-device RAID for a cluster, it supports
+two levels: raid1 and raid10 (limited support).
+
+
+1. On-disk format
+=================
+
+Separate write-intent-bitmaps are used for each cluster node.
+The bitmaps record all writes that may have been started on that node,
+and may not yet have finished. The on-disk layout is::
+
+ 0 4k 8k 12k
+ -------------------------------------------------------------------
+ | idle | md super | bm super [0] + bits |
+ | bm bits[0, contd] | bm super[1] + bits | bm bits[1, contd] |
+ | bm super[2] + bits | bm bits [2, contd] | bm super[3] + bits |
+ | bm bits [3, contd] | | |
+
+During "normal" functioning we assume the filesystem ensures that only
+one node writes to any given block at a time, so a write request will
+
+ - set the appropriate bit (if not already set)
+ - commit the write to all mirrors
+ - schedule the bit to be cleared after a timeout.
+
+Reads are just handled normally. It is up to the filesystem to ensure
+one node doesn't read from a location where another node (or the same
+node) is writing.
+
+
+2. DLM Locks for management
+===========================
+
+There are three groups of locks for managing the device:
+
+2.1 Bitmap lock resource (bm_lockres)
+-------------------------------------
+
+ The bm_lockres protects individual node bitmaps. They are named in
+ the form bitmap000 for node 1, bitmap001 for node 2 and so on. When a
+ node joins the cluster, it acquires the lock in PW mode and it stays
+ so during the lifetime the node is part of the cluster. The lock
+ resource number is based on the slot number returned by the DLM
+ subsystem. Since DLM starts node count from one and bitmap slots
+ start from zero, one is subtracted from the DLM slot number to arrive
+ at the bitmap slot number.
+
+ The LVB of the bitmap lock for a particular node records the range
+ of sectors that are being re-synced by that node. No other
+ node may write to those sectors. This is used when a new nodes
+ joins the cluster.
+
+2.2 Message passing locks
+-------------------------
+
+ Each node has to communicate with other nodes when starting or ending
+ resync, and for metadata superblock updates. This communication is
+ managed through three locks: "token", "message", and "ack", together
+ with the Lock Value Block (LVB) of one of the "message" lock.
+
+2.3 new-device management
+-------------------------
+
+ A single lock: "no-new-dev" is used to co-ordinate the addition of
+ new devices - this must be synchronized across the array.
+ Normally all nodes hold a concurrent-read lock on this device.
+
+3. Communication
+================
+
+ Messages can be broadcast to all nodes, and the sender waits for all
+ other nodes to acknowledge the message before proceeding. Only one
+ message can be processed at a time.
+
+3.1 Message Types
+-----------------
+
+ There are six types of messages which are passed:
+
+3.1.1 METADATA_UPDATED
+^^^^^^^^^^^^^^^^^^^^^^
+
+ informs other nodes that the metadata has
+ been updated, and the node must re-read the md superblock. This is
+ performed synchronously. It is primarily used to signal device
+ failure.
+
+3.1.2 RESYNCING
+^^^^^^^^^^^^^^^
+ informs other nodes that a resync is initiated or
+ ended so that each node may suspend or resume the region. Each
+ RESYNCING message identifies a range of the devices that the
+ sending node is about to resync. This overrides any previous
+ notification from that node: only one ranged can be resynced at a
+ time per-node.
+
+3.1.3 NEWDISK
+^^^^^^^^^^^^^
+
+ informs other nodes that a device is being added to
+ the array. Message contains an identifier for that device. See
+ below for further details.
+
+3.1.4 REMOVE
+^^^^^^^^^^^^
+
+ A failed or spare device is being removed from the
+ array. The slot-number of the device is included in the message.
+
+ 3.1.5 RE_ADD:
+
+ A failed device is being re-activated - the assumption
+ is that it has been determined to be working again.
+
+ 3.1.6 BITMAP_NEEDS_SYNC:
+
+ If a node is stopped locally but the bitmap
+ isn't clean, then another node is informed to take the ownership of
+ resync.
+
+3.2 Communication mechanism
+---------------------------
+
+ The DLM LVB is used to communicate within nodes of the cluster. There
+ are three resources used for the purpose:
+
+3.2.1 token
+^^^^^^^^^^^
+ The resource which protects the entire communication
+ system. The node having the token resource is allowed to
+ communicate.
+
+3.2.2 message
+^^^^^^^^^^^^^
+ The lock resource which carries the data to communicate.
+
+3.2.3 ack
+^^^^^^^^^
+
+ The resource, acquiring which means the message has been
+ acknowledged by all nodes in the cluster. The BAST of the resource
+ is used to inform the receiving node that a node wants to
+ communicate.
+
+The algorithm is:
+
+ 1. receive status - all nodes have concurrent-reader lock on "ack"::
+
+ sender receiver receiver
+ "ack":CR "ack":CR "ack":CR
+
+ 2. sender get EX on "token",
+ sender get EX on "message"::
+
+ sender receiver receiver
+ "token":EX "ack":CR "ack":CR
+ "message":EX
+ "ack":CR
+
+ Sender checks that it still needs to send a message. Messages
+ received or other events that happened while waiting for the
+ "token" may have made this message inappropriate or redundant.
+
+ 3. sender writes LVB
+
+ sender down-convert "message" from EX to CW
+
+ sender try to get EX of "ack"
+
+ ::
+
+ [ wait until all receivers have *processed* the "message" ]
+
+ [ triggered by bast of "ack" ]
+ receiver get CR on "message"
+ receiver read LVB
+ receiver processes the message
+ [ wait finish ]
+ receiver releases "ack"
+ receiver tries to get PR on "message"
+
+ sender receiver receiver
+ "token":EX "message":CR "message":CR
+ "message":CW
+ "ack":EX
+
+ 4. triggered by grant of EX on "ack" (indicating all receivers
+ have processed message)
+
+ sender down-converts "ack" from EX to CR
+
+ sender releases "message"
+
+ sender releases "token"
+
+ ::
+
+ receiver upconvert to PR on "message"
+ receiver get CR of "ack"
+ receiver release "message"
+
+ sender receiver receiver
+ "ack":CR "ack":CR "ack":CR
+
+
+4. Handling Failures
+====================
+
+4.1 Node Failure
+----------------
+
+ When a node fails, the DLM informs the cluster with the slot
+ number. The node starts a cluster recovery thread. The cluster
+ recovery thread:
+
+ - acquires the bitmap<number> lock of the failed node
+ - opens the bitmap
+ - reads the bitmap of the failed node
+ - copies the set bitmap to local node
+ - cleans the bitmap of the failed node
+ - releases bitmap<number> lock of the failed node
+ - initiates resync of the bitmap on the current node
+ md_check_recovery is invoked within recover_bitmaps,
+ then md_check_recovery -> metadata_update_start/finish,
+ it will lock the communication by lock_comm.
+ Which means when one node is resyncing it blocks all
+ other nodes from writing anywhere on the array.
+
+ The resync process is the regular md resync. However, in a clustered
+ environment when a resync is performed, it needs to tell other nodes
+ of the areas which are suspended. Before a resync starts, the node
+ send out RESYNCING with the (lo,hi) range of the area which needs to
+ be suspended. Each node maintains a suspend_list, which contains the
+ list of ranges which are currently suspended. On receiving RESYNCING,
+ the node adds the range to the suspend_list. Similarly, when the node
+ performing resync finishes, it sends RESYNCING with an empty range to
+ other nodes and other nodes remove the corresponding entry from the
+ suspend_list.
+
+ A helper function, ->area_resyncing() can be used to check if a
+ particular I/O range should be suspended or not.
+
+4.2 Device Failure
+==================
+
+ Device failures are handled and communicated with the metadata update
+ routine. When a node detects a device failure it does not allow
+ any further writes to that device until the failure has been
+ acknowledged by all other nodes.
+
+5. Adding a new Device
+----------------------
+
+ For adding a new device, it is necessary that all nodes "see" the new
+ device to be added. For this, the following algorithm is used:
+
+ 1. Node 1 issues mdadm --manage /dev/mdX --add /dev/sdYY which issues
+ ioctl(ADD_NEW_DISK with disc.state set to MD_DISK_CLUSTER_ADD)
+ 2. Node 1 sends a NEWDISK message with uuid and slot number
+ 3. Other nodes issue kobject_uevent_env with uuid and slot number
+ (Steps 4,5 could be a udev rule)
+ 4. In userspace, the node searches for the disk, perhaps
+ using blkid -t SUB_UUID=""
+ 5. Other nodes issue either of the following depending on whether
+ the disk was found:
+ ioctl(ADD_NEW_DISK with disc.state set to MD_DISK_CANDIDATE and
+ disc.number set to slot number)
+ ioctl(CLUSTERED_DISK_NACK)
+ 6. Other nodes drop lock on "no-new-devs" (CR) if device is found
+ 7. Node 1 attempts EX lock on "no-new-dev"
+ 8. If node 1 gets the lock, it sends METADATA_UPDATED after
+ unmarking the disk as SpareLocal
+ 9. If not (get "no-new-dev" lock), it fails the operation and sends
+ METADATA_UPDATED.
+ 10. Other nodes get the information whether a disk is added or not
+ by the following METADATA_UPDATED.
+
+6. Module interface
+===================
+
+ There are 17 call-backs which the md core can make to the cluster
+ module. Understanding these can give a good overview of the whole
+ process.
+
+6.1 join(nodes) and leave()
+---------------------------
+
+ These are called when an array is started with a clustered bitmap,
+ and when the array is stopped. join() ensures the cluster is
+ available and initializes the various resources.
+ Only the first 'nodes' nodes in the cluster can use the array.
+
+6.2 slot_number()
+-----------------
+
+ Reports the slot number advised by the cluster infrastructure.
+ Range is from 0 to nodes-1.
+
+6.3 resync_info_update()
+------------------------
+
+ This updates the resync range that is stored in the bitmap lock.
+ The starting point is updated as the resync progresses. The
+ end point is always the end of the array.
+ It does *not* send a RESYNCING message.
+
+6.4 resync_start(), resync_finish()
+-----------------------------------
+
+ These are called when resync/recovery/reshape starts or stops.
+ They update the resyncing range in the bitmap lock and also
+ send a RESYNCING message. resync_start reports the whole
+ array as resyncing, resync_finish reports none of it.
+
+ resync_finish() also sends a BITMAP_NEEDS_SYNC message which
+ allows some other node to take over.
+
+6.5 metadata_update_start(), metadata_update_finish(), metadata_update_cancel()
+-------------------------------------------------------------------------------
+
+ metadata_update_start is used to get exclusive access to
+ the metadata. If a change is still needed once that access is
+ gained, metadata_update_finish() will send a METADATA_UPDATE
+ message to all other nodes, otherwise metadata_update_cancel()
+ can be used to release the lock.
+
+6.6 area_resyncing()
+--------------------
+
+ This combines two elements of functionality.
+
+ Firstly, it will check if any node is currently resyncing
+ anything in a given range of sectors. If any resync is found,
+ then the caller will avoid writing or read-balancing in that
+ range.
+
+ Secondly, while node recovery is happening it reports that
+ all areas are resyncing for READ requests. This avoids races
+ between the cluster-filesystem and the cluster-RAID handling
+ a node failure.
+
+6.7 add_new_disk_start(), add_new_disk_finish(), new_disk_ack()
+---------------------------------------------------------------
+
+ These are used to manage the new-disk protocol described above.
+ When a new device is added, add_new_disk_start() is called before
+ it is bound to the array and, if that succeeds, add_new_disk_finish()
+ is called the device is fully added.
+
+ When a device is added in acknowledgement to a previous
+ request, or when the device is declared "unavailable",
+ new_disk_ack() is called.
+
+6.8 remove_disk()
+-----------------
+
+ This is called when a spare or failed device is removed from
+ the array. It causes a REMOVE message to be send to other nodes.
+
+6.9 gather_bitmaps()
+--------------------
+
+ This sends a RE_ADD message to all other nodes and then
+ gathers bitmap information from all bitmaps. This combined
+ bitmap is then used to recovery the re-added device.
+
+6.10 lock_all_bitmaps() and unlock_all_bitmaps()
+------------------------------------------------
+
+ These are called when change bitmap to none. If a node plans
+ to clear the cluster raid's bitmap, it need to make sure no other
+ nodes are using the raid which is achieved by lock all bitmap
+ locks within the cluster, and also those locks are unlocked
+ accordingly.
+
+7. Unsupported features
+=======================
+
+There are somethings which are not supported by cluster MD yet.
+
+- change array_sectors.
diff --git a/Documentation/driver-api/md/raid5-cache.rst b/Documentation/driver-api/md/raid5-cache.rst
new file mode 100644
index 000000000000..d7a15f44a7c3
--- /dev/null
+++ b/Documentation/driver-api/md/raid5-cache.rst
@@ -0,0 +1,111 @@
+================
+RAID 4/5/6 cache
+================
+
+Raid 4/5/6 could include an extra disk for data cache besides normal RAID
+disks. The role of RAID disks isn't changed with the cache disk. The cache disk
+caches data to the RAID disks. The cache can be in write-through (supported
+since 4.4) or write-back mode (supported since 4.10). mdadm (supported since
+3.4) has a new option '--write-journal' to create array with cache. Please
+refer to mdadm manual for details. By default (RAID array starts), the cache is
+in write-through mode. A user can switch it to write-back mode by::
+
+ echo "write-back" > /sys/block/md0/md/journal_mode
+
+And switch it back to write-through mode by::
+
+ echo "write-through" > /sys/block/md0/md/journal_mode
+
+In both modes, all writes to the array will hit cache disk first. This means
+the cache disk must be fast and sustainable.
+
+write-through mode
+==================
+
+This mode mainly fixes the 'write hole' issue. For RAID 4/5/6 array, an unclean
+shutdown can cause data in some stripes to not be in consistent state, eg, data
+and parity don't match. The reason is that a stripe write involves several RAID
+disks and it's possible the writes don't hit all RAID disks yet before the
+unclean shutdown. We call an array degraded if it has inconsistent data. MD
+tries to resync the array to bring it back to normal state. But before the
+resync completes, any system crash will expose the chance of real data
+corruption in the RAID array. This problem is called 'write hole'.
+
+The write-through cache will cache all data on cache disk first. After the data
+is safe on the cache disk, the data will be flushed onto RAID disks. The
+two-step write will guarantee MD can recover correct data after unclean
+shutdown even the array is degraded. Thus the cache can close the 'write hole'.
+
+In write-through mode, MD reports IO completion to upper layer (usually
+filesystems) after the data is safe on RAID disks, so cache disk failure
+doesn't cause data loss. Of course cache disk failure means the array is
+exposed to 'write hole' again.
+
+In write-through mode, the cache disk isn't required to be big. Several
+hundreds megabytes are enough.
+
+write-back mode
+===============
+
+write-back mode fixes the 'write hole' issue too, since all write data is
+cached on cache disk. But the main goal of 'write-back' cache is to speed up
+write. If a write crosses all RAID disks of a stripe, we call it full-stripe
+write. For non-full-stripe writes, MD must read old data before the new parity
+can be calculated. These synchronous reads hurt write throughput. Some writes
+which are sequential but not dispatched in the same time will suffer from this
+overhead too. Write-back cache will aggregate the data and flush the data to
+RAID disks only after the data becomes a full stripe write. This will
+completely avoid the overhead, so it's very helpful for some workloads. A
+typical workload which does sequential write followed by fsync is an example.
+
+In write-back mode, MD reports IO completion to upper layer (usually
+filesystems) right after the data hits cache disk. The data is flushed to raid
+disks later after specific conditions met. So cache disk failure will cause
+data loss.
+
+In write-back mode, MD also caches data in memory. The memory cache includes
+the same data stored on cache disk, so a power loss doesn't cause data loss.
+The memory cache size has performance impact for the array. It's recommended
+the size is big. A user can configure the size by::
+
+ echo "2048" > /sys/block/md0/md/stripe_cache_size
+
+Too small cache disk will make the write aggregation less efficient in this
+mode depending on the workloads. It's recommended to use a cache disk with at
+least several gigabytes size in write-back mode.
+
+The implementation
+==================
+
+The write-through and write-back cache use the same disk format. The cache disk
+is organized as a simple write log. The log consists of 'meta data' and 'data'
+pairs. The meta data describes the data. It also includes checksum and sequence
+ID for recovery identification. Data can be IO data and parity data. Data is
+checksumed too. The checksum is stored in the meta data ahead of the data. The
+checksum is an optimization because MD can write meta and data freely without
+worry about the order. MD superblock has a field pointed to the valid meta data
+of log head.
+
+The log implementation is pretty straightforward. The difficult part is the
+order in which MD writes data to cache disk and RAID disks. Specifically, in
+write-through mode, MD calculates parity for IO data, writes both IO data and
+parity to the log, writes the data and parity to RAID disks after the data and
+parity is settled down in log and finally the IO is finished. Read just reads
+from raid disks as usual.
+
+In write-back mode, MD writes IO data to the log and reports IO completion. The
+data is also fully cached in memory at that time, which means read must query
+memory cache. If some conditions are met, MD will flush the data to RAID disks.
+MD will calculate parity for the data and write parity into the log. After this
+is finished, MD will write both data and parity into RAID disks, then MD can
+release the memory cache. The flush conditions could be stripe becomes a full
+stripe write, free cache disk space is low or free in-kernel memory cache space
+is low.
+
+After an unclean shutdown, MD does recovery. MD reads all meta data and data
+from the log. The sequence ID and checksum will help us detect corrupted meta
+data and data. If MD finds a stripe with data and valid parities (1 parity for
+raid4/5 and 2 for raid6), MD will write the data and parities to RAID disks. If
+parities are incompleted, they are discarded. If part of data is corrupted,
+they are discarded too. MD then loads valid data and writes them to RAID disks
+in normal way.
diff --git a/Documentation/driver-api/md/raid5-ppl.rst b/Documentation/driver-api/md/raid5-ppl.rst
new file mode 100644
index 000000000000..357e5515bc55
--- /dev/null
+++ b/Documentation/driver-api/md/raid5-ppl.rst
@@ -0,0 +1,47 @@
+==================
+Partial Parity Log
+==================
+
+Partial Parity Log (PPL) is a feature available for RAID5 arrays. The issue
+addressed by PPL is that after a dirty shutdown, parity of a particular stripe
+may become inconsistent with data on other member disks. If the array is also
+in degraded state, there is no way to recalculate parity, because one of the
+disks is missing. This can lead to silent data corruption when rebuilding the
+array or using it is as degraded - data calculated from parity for array blocks
+that have not been touched by a write request during the unclean shutdown can
+be incorrect. Such condition is known as the RAID5 Write Hole. Because of
+this, md by default does not allow starting a dirty degraded array.
+
+Partial parity for a write operation is the XOR of stripe data chunks not
+modified by this write. It is just enough data needed for recovering from the
+write hole. XORing partial parity with the modified chunks produces parity for
+the stripe, consistent with its state before the write operation, regardless of
+which chunk writes have completed. If one of the not modified data disks of
+this stripe is missing, this updated parity can be used to recover its
+contents. PPL recovery is also performed when starting an array after an
+unclean shutdown and all disks are available, eliminating the need to resync
+the array. Because of this, using write-intent bitmap and PPL together is not
+supported.
+
+When handling a write request PPL writes partial parity before new data and
+parity are dispatched to disks. PPL is a distributed log - it is stored on
+array member drives in the metadata area, on the parity drive of a particular
+stripe. It does not require a dedicated journaling drive. Write performance is
+reduced by up to 30%-40% but it scales with the number of drives in the array
+and the journaling drive does not become a bottleneck or a single point of
+failure.
+
+Unlike raid5-cache, the other solution in md for closing the write hole, PPL is
+not a true journal. It does not protect from losing in-flight data, only from
+silent data corruption. If a dirty disk of a stripe is lost, no PPL recovery is
+performed for this stripe (parity is not updated). So it is possible to have
+arbitrary data in the written part of a stripe if that disk is lost. In such
+case the behavior is the same as in plain raid5.
+
+PPL is available for md version-1 metadata and external (specifically IMSM)
+metadata arrays. It can be enabled using mdadm option --consistency-policy=ppl.
+
+There is a limitation of maximum 64 disks in the array for PPL. It allows to
+keep data structures and implementation simple. RAID5 arrays with so many disks
+are not likely due to high risk of multiple disks failure. Such restriction
+should not be a real life limitation.
diff --git a/Documentation/driver-api/memory-devices/index.rst b/Documentation/driver-api/memory-devices/index.rst
new file mode 100644
index 000000000000..28101458cda5
--- /dev/null
+++ b/Documentation/driver-api/memory-devices/index.rst
@@ -0,0 +1,18 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=========================
+Memory Controller drivers
+=========================
+
+.. toctree::
+ :maxdepth: 1
+
+ ti-emif
+ ti-gpmc
+
+.. only:: subproject and html
+
+ Indices
+ =======
+
+ * :ref:`genindex`
diff --git a/Documentation/driver-api/memory-devices/ti-emif.rst b/Documentation/driver-api/memory-devices/ti-emif.rst
new file mode 100644
index 000000000000..dea2ad9bcd7e
--- /dev/null
+++ b/Documentation/driver-api/memory-devices/ti-emif.rst
@@ -0,0 +1,64 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+===============================
+TI EMIF SDRAM Controller Driver
+===============================
+
+Author
+======
+Aneesh V <aneesh@ti.com>
+
+Location
+========
+driver/memory/emif.c
+
+Supported SoCs:
+===============
+TI OMAP44xx
+TI OMAP54xx
+
+Menuconfig option:
+==================
+Device Drivers
+ Memory devices
+ Texas Instruments EMIF driver
+
+Description
+===========
+This driver is for the EMIF module available in Texas Instruments
+SoCs. EMIF is an SDRAM controller that, based on its revision,
+supports one or more of DDR2, DDR3, and LPDDR2 SDRAM protocols.
+This driver takes care of only LPDDR2 memories presently. The
+functions of the driver includes re-configuring AC timing
+parameters and other settings during frequency, voltage and
+temperature changes
+
+Platform Data (see include/linux/platform_data/emif_plat.h)
+===========================================================
+DDR device details and other board dependent and SoC dependent
+information can be passed through platform data (struct emif_platform_data)
+
+- DDR device details: 'struct ddr_device_info'
+- Device AC timings: 'struct lpddr2_timings' and 'struct lpddr2_min_tck'
+- Custom configurations: customizable policy options through
+ 'struct emif_custom_configs'
+- IP revision
+- PHY type
+
+Interface to the external world
+===============================
+EMIF driver registers notifiers for voltage and frequency changes
+affecting EMIF and takes appropriate actions when these are invoked.
+
+- freq_pre_notify_handling()
+- freq_post_notify_handling()
+- volt_notify_handling()
+
+Debugfs
+=======
+The driver creates two debugfs entries per device.
+
+- regcache_dump : dump of register values calculated and saved for all
+ frequencies used so far.
+- mr4 : last polled value of MR4 register in the LPDDR2 device. MR4
+ indicates the current temperature level of the device.
diff --git a/Documentation/driver-api/memory-devices/ti-gpmc.rst b/Documentation/driver-api/memory-devices/ti-gpmc.rst
new file mode 100644
index 000000000000..33efcb81f080
--- /dev/null
+++ b/Documentation/driver-api/memory-devices/ti-gpmc.rst
@@ -0,0 +1,179 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+========================================
+GPMC (General Purpose Memory Controller)
+========================================
+
+GPMC is an unified memory controller dedicated to interfacing external
+memory devices like
+
+ * Asynchronous SRAM like memories and application specific integrated
+ circuit devices.
+ * Asynchronous, synchronous, and page mode burst NOR flash devices
+ NAND flash
+ * Pseudo-SRAM devices
+
+GPMC is found on Texas Instruments SoC's (OMAP based)
+IP details: http://www.ti.com/lit/pdf/spruh73 section 7.1
+
+
+GPMC generic timing calculation:
+================================
+
+GPMC has certain timings that has to be programmed for proper
+functioning of the peripheral, while peripheral has another set of
+timings. To have peripheral work with gpmc, peripheral timings has to
+be translated to the form gpmc can understand. The way it has to be
+translated depends on the connected peripheral. Also there is a
+dependency for certain gpmc timings on gpmc clock frequency. Hence a
+generic timing routine was developed to achieve above requirements.
+
+Generic routine provides a generic method to calculate gpmc timings
+from gpmc peripheral timings. struct gpmc_device_timings fields has to
+be updated with timings from the datasheet of the peripheral that is
+connected to gpmc. A few of the peripheral timings can be fed either
+in time or in cycles, provision to handle this scenario has been
+provided (refer struct gpmc_device_timings definition). It may so
+happen that timing as specified by peripheral datasheet is not present
+in timing structure, in this scenario, try to correlate peripheral
+timing to the one available. If that doesn't work, try to add a new
+field as required by peripheral, educate generic timing routine to
+handle it, make sure that it does not break any of the existing.
+Then there may be cases where peripheral datasheet doesn't mention
+certain fields of struct gpmc_device_timings, zero those entries.
+
+Generic timing routine has been verified to work properly on
+multiple onenand's and tusb6010 peripherals.
+
+A word of caution: generic timing routine has been developed based
+on understanding of gpmc timings, peripheral timings, available
+custom timing routines, a kind of reverse engineering without
+most of the datasheets & hardware (to be exact none of those supported
+in mainline having custom timing routine) and by simulation.
+
+gpmc timing dependency on peripheral timings:
+
+[<gpmc_timing>: <peripheral timing1>, <peripheral timing2> ...]
+
+1. common
+
+cs_on:
+ t_ceasu
+adv_on:
+ t_avdasu, t_ceavd
+
+2. sync common
+
+sync_clk:
+ clk
+page_burst_access:
+ t_bacc
+clk_activation:
+ t_ces, t_avds
+
+3. read async muxed
+
+adv_rd_off:
+ t_avdp_r
+oe_on:
+ t_oeasu, t_aavdh
+access:
+ t_iaa, t_oe, t_ce, t_aa
+rd_cycle:
+ t_rd_cycle, t_cez_r, t_oez
+
+4. read async non-muxed
+
+adv_rd_off:
+ t_avdp_r
+oe_on:
+ t_oeasu
+access:
+ t_iaa, t_oe, t_ce, t_aa
+rd_cycle:
+ t_rd_cycle, t_cez_r, t_oez
+
+5. read sync muxed
+
+adv_rd_off:
+ t_avdp_r, t_avdh
+oe_on:
+ t_oeasu, t_ach, cyc_aavdh_oe
+access:
+ t_iaa, cyc_iaa, cyc_oe
+rd_cycle:
+ t_cez_r, t_oez, t_ce_rdyz
+
+6. read sync non-muxed
+
+adv_rd_off:
+ t_avdp_r
+oe_on:
+ t_oeasu
+access:
+ t_iaa, cyc_iaa, cyc_oe
+rd_cycle:
+ t_cez_r, t_oez, t_ce_rdyz
+
+7. write async muxed
+
+adv_wr_off:
+ t_avdp_w
+we_on, wr_data_mux_bus:
+ t_weasu, t_aavdh, cyc_aavhd_we
+we_off:
+ t_wpl
+cs_wr_off:
+ t_wph
+wr_cycle:
+ t_cez_w, t_wr_cycle
+
+8. write async non-muxed
+
+adv_wr_off:
+ t_avdp_w
+we_on, wr_data_mux_bus:
+ t_weasu
+we_off:
+ t_wpl
+cs_wr_off:
+ t_wph
+wr_cycle:
+ t_cez_w, t_wr_cycle
+
+9. write sync muxed
+
+adv_wr_off:
+ t_avdp_w, t_avdh
+we_on, wr_data_mux_bus:
+ t_weasu, t_rdyo, t_aavdh, cyc_aavhd_we
+we_off:
+ t_wpl, cyc_wpl
+cs_wr_off:
+ t_wph
+wr_cycle:
+ t_cez_w, t_ce_rdyz
+
+10. write sync non-muxed
+
+adv_wr_off:
+ t_avdp_w
+we_on, wr_data_mux_bus:
+ t_weasu, t_rdyo
+we_off:
+ t_wpl, cyc_wpl
+cs_wr_off:
+ t_wph
+wr_cycle:
+ t_cez_w, t_ce_rdyz
+
+
+Note:
+ Many of gpmc timings are dependent on other gpmc timings (a few
+ gpmc timings purely dependent on other gpmc timings, a reason that
+ some of the gpmc timings are missing above), and it will result in
+ indirect dependency of peripheral timings to gpmc timings other than
+ mentioned above, refer timing routine for more details. To know what
+ these peripheral timings correspond to, please see explanations in
+ struct gpmc_device_timings definition. And for gpmc timings refer
+ IP details (link above).
diff --git a/Documentation/driver-api/men-chameleon-bus.rst b/Documentation/driver-api/men-chameleon-bus.rst
new file mode 100644
index 000000000000..1b1f048aa748
--- /dev/null
+++ b/Documentation/driver-api/men-chameleon-bus.rst
@@ -0,0 +1,175 @@
+=================
+MEN Chameleon Bus
+=================
+
+.. Table of Contents
+ =================
+ 1 Introduction
+ 1.1 Scope of this Document
+ 1.2 Limitations of the current implementation
+ 2 Architecture
+ 2.1 MEN Chameleon Bus
+ 2.2 Carrier Devices
+ 2.3 Parser
+ 3 Resource handling
+ 3.1 Memory Resources
+ 3.2 IRQs
+ 4 Writing an MCB driver
+ 4.1 The driver structure
+ 4.2 Probing and attaching
+ 4.3 Initializing the driver
+
+
+Introduction
+============
+
+This document describes the architecture and implementation of the MEN
+Chameleon Bus (called MCB throughout this document).
+
+Scope of this Document
+----------------------
+
+This document is intended to be a short overview of the current
+implementation and does by no means describe the complete possibilities of MCB
+based devices.
+
+Limitations of the current implementation
+-----------------------------------------
+
+The current implementation is limited to PCI and PCIe based carrier devices
+that only use a single memory resource and share the PCI legacy IRQ. Not
+implemented are:
+
+- Multi-resource MCB devices like the VME Controller or M-Module carrier.
+- MCB devices that need another MCB device, like SRAM for a DMA Controller's
+ buffer descriptors or a video controller's video memory.
+- A per-carrier IRQ domain for carrier devices that have one (or more) IRQs
+ per MCB device like PCIe based carriers with MSI or MSI-X support.
+
+Architecture
+============
+
+MCB is divided into 3 functional blocks:
+
+- The MEN Chameleon Bus itself,
+- drivers for MCB Carrier Devices and
+- the parser for the Chameleon table.
+
+MEN Chameleon Bus
+-----------------
+
+The MEN Chameleon Bus is an artificial bus system that attaches to a so
+called Chameleon FPGA device found on some hardware produced my MEN Mikro
+Elektronik GmbH. These devices are multi-function devices implemented in a
+single FPGA and usually attached via some sort of PCI or PCIe link. Each
+FPGA contains a header section describing the content of the FPGA. The
+header lists the device id, PCI BAR, offset from the beginning of the PCI
+BAR, size in the FPGA, interrupt number and some other properties currently
+not handled by the MCB implementation.
+
+Carrier Devices
+---------------
+
+A carrier device is just an abstraction for the real world physical bus the
+Chameleon FPGA is attached to. Some IP Core drivers may need to interact with
+properties of the carrier device (like querying the IRQ number of a PCI
+device). To provide abstraction from the real hardware bus, an MCB carrier
+device provides callback methods to translate the driver's MCB function calls
+to hardware related function calls. For example a carrier device may
+implement the get_irq() method which can be translated into a hardware bus
+query for the IRQ number the device should use.
+
+Parser
+------
+
+The parser reads the first 512 bytes of a Chameleon device and parses the
+Chameleon table. Currently the parser only supports the Chameleon v2 variant
+of the Chameleon table but can easily be adopted to support an older or
+possible future variant. While parsing the table's entries new MCB devices
+are allocated and their resources are assigned according to the resource
+assignment in the Chameleon table. After resource assignment is finished, the
+MCB devices are registered at the MCB and thus at the driver core of the
+Linux kernel.
+
+Resource handling
+=================
+
+The current implementation assigns exactly one memory and one IRQ resource
+per MCB device. But this is likely going to change in the future.
+
+Memory Resources
+----------------
+
+Each MCB device has exactly one memory resource, which can be requested from
+the MCB bus. This memory resource is the physical address of the MCB device
+inside the carrier and is intended to be passed to ioremap() and friends. It
+is already requested from the kernel by calling request_mem_region().
+
+IRQs
+----
+
+Each MCB device has exactly one IRQ resource, which can be requested from the
+MCB bus. If a carrier device driver implements the ->get_irq() callback
+method, the IRQ number assigned by the carrier device will be returned,
+otherwise the IRQ number inside the Chameleon table will be returned. This
+number is suitable to be passed to request_irq().
+
+Writing an MCB driver
+=====================
+
+The driver structure
+--------------------
+
+Each MCB driver has a structure to identify the device driver as well as
+device ids which identify the IP Core inside the FPGA. The driver structure
+also contains callback methods which get executed on driver probe and
+removal from the system::
+
+ static const struct mcb_device_id foo_ids[] = {
+ { .device = 0x123 },
+ { }
+ };
+ MODULE_DEVICE_TABLE(mcb, foo_ids);
+
+ static struct mcb_driver foo_driver = {
+ driver = {
+ .name = "foo-bar",
+ .owner = THIS_MODULE,
+ },
+ .probe = foo_probe,
+ .remove = foo_remove,
+ .id_table = foo_ids,
+ };
+
+Probing and attaching
+---------------------
+
+When a driver is loaded and the MCB devices it services are found, the MCB
+core will call the driver's probe callback method. When the driver is removed
+from the system, the MCB core will call the driver's remove callback method::
+
+ static init foo_probe(struct mcb_device *mdev, const struct mcb_device_id *id);
+ static void foo_remove(struct mcb_device *mdev);
+
+Initializing the driver
+-----------------------
+
+When the kernel is booted or your foo driver module is inserted, you have to
+perform driver initialization. Usually it is enough to register your driver
+module at the MCB core::
+
+ static int __init foo_init(void)
+ {
+ return mcb_register_driver(&foo_driver);
+ }
+ module_init(foo_init);
+
+ static void __exit foo_exit(void)
+ {
+ mcb_unregister_driver(&foo_driver);
+ }
+ module_exit(foo_exit);
+
+The module_mcb_driver() macro can be used to reduce the above code::
+
+ module_mcb_driver(foo_driver);
diff --git a/Documentation/driver-api/mmc/index.rst b/Documentation/driver-api/mmc/index.rst
new file mode 100644
index 000000000000..7339736ac774
--- /dev/null
+++ b/Documentation/driver-api/mmc/index.rst
@@ -0,0 +1,13 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+========================
+MMC/SD/SDIO card support
+========================
+
+.. toctree::
+ :maxdepth: 1
+
+ mmc-dev-attrs
+ mmc-dev-parts
+ mmc-async-req
+ mmc-tools
diff --git a/Documentation/driver-api/mmc/mmc-async-req.rst b/Documentation/driver-api/mmc/mmc-async-req.rst
new file mode 100644
index 000000000000..0f7197c9c3b5
--- /dev/null
+++ b/Documentation/driver-api/mmc/mmc-async-req.rst
@@ -0,0 +1,98 @@
+========================
+MMC Asynchronous Request
+========================
+
+Rationale
+=========
+
+How significant is the cache maintenance overhead?
+
+It depends. Fast eMMC and multiple cache levels with speculative cache
+pre-fetch makes the cache overhead relatively significant. If the DMA
+preparations for the next request are done in parallel with the current
+transfer, the DMA preparation overhead would not affect the MMC performance.
+
+The intention of non-blocking (asynchronous) MMC requests is to minimize the
+time between when an MMC request ends and another MMC request begins.
+
+Using mmc_wait_for_req(), the MMC controller is idle while dma_map_sg and
+dma_unmap_sg are processing. Using non-blocking MMC requests makes it
+possible to prepare the caches for next job in parallel with an active
+MMC request.
+
+MMC block driver
+================
+
+The mmc_blk_issue_rw_rq() in the MMC block driver is made non-blocking.
+
+The increase in throughput is proportional to the time it takes to
+prepare (major part of preparations are dma_map_sg() and dma_unmap_sg())
+a request and how fast the memory is. The faster the MMC/SD is the
+more significant the prepare request time becomes. Roughly the expected
+performance gain is 5% for large writes and 10% on large reads on a L2 cache
+platform. In power save mode, when clocks run on a lower frequency, the DMA
+preparation may cost even more. As long as these slower preparations are run
+in parallel with the transfer performance won't be affected.
+
+Details on measurements from IOZone and mmc_test
+================================================
+
+https://wiki.linaro.org/WorkingGroups/Kernel/Specs/StoragePerfMMC-async-req
+
+MMC core API extension
+======================
+
+There is one new public function mmc_start_req().
+
+It starts a new MMC command request for a host. The function isn't
+truly non-blocking. If there is an ongoing async request it waits
+for completion of that request and starts the new one and returns. It
+doesn't wait for the new request to complete. If there is no ongoing
+request it starts the new request and returns immediately.
+
+MMC host extensions
+===================
+
+There are two optional members in the mmc_host_ops -- pre_req() and
+post_req() -- that the host driver may implement in order to move work
+to before and after the actual mmc_host_ops.request() function is called.
+
+In the DMA case pre_req() may do dma_map_sg() and prepare the DMA
+descriptor, and post_req() runs the dma_unmap_sg().
+
+Optimize for the first request
+==============================
+
+The first request in a series of requests can't be prepared in parallel
+with the previous transfer, since there is no previous request.
+
+The argument is_first_req in pre_req() indicates that there is no previous
+request. The host driver may optimize for this scenario to minimize
+the performance loss. A way to optimize for this is to split the current
+request in two chunks, prepare the first chunk and start the request,
+and finally prepare the second chunk and start the transfer.
+
+Pseudocode to handle is_first_req scenario with minimal prepare overhead::
+
+ if (is_first_req && req->size > threshold)
+ /* start MMC transfer for the complete transfer size */
+ mmc_start_command(MMC_CMD_TRANSFER_FULL_SIZE);
+
+ /*
+ * Begin to prepare DMA while cmd is being processed by MMC.
+ * The first chunk of the request should take the same time
+ * to prepare as the "MMC process command time".
+ * If prepare time exceeds MMC cmd time
+ * the transfer is delayed, guesstimate max 4k as first chunk size.
+ */
+ prepare_1st_chunk_for_dma(req);
+ /* flush pending desc to the DMAC (dmaengine.h) */
+ dma_issue_pending(req->dma_desc);
+
+ prepare_2nd_chunk_for_dma(req);
+ /*
+ * The second issue_pending should be called before MMC runs out
+ * of the first chunk. If the MMC runs out of the first data chunk
+ * before this call, the transfer is delayed.
+ */
+ dma_issue_pending(req->dma_desc);
diff --git a/Documentation/driver-api/mmc/mmc-dev-attrs.rst b/Documentation/driver-api/mmc/mmc-dev-attrs.rst
new file mode 100644
index 000000000000..4f44b1b730d6
--- /dev/null
+++ b/Documentation/driver-api/mmc/mmc-dev-attrs.rst
@@ -0,0 +1,91 @@
+==================================
+SD and MMC Block Device Attributes
+==================================
+
+These attributes are defined for the block devices associated with the
+SD or MMC device.
+
+The following attributes are read/write.
+
+ ======== ===============================================
+ force_ro Enforce read-only access even if write protect switch is off.
+ ======== ===============================================
+
+SD and MMC Device Attributes
+============================
+
+All attributes are read-only.
+
+ ====================== ===============================================
+ cid Card Identification Register
+ csd Card Specific Data Register
+ scr SD Card Configuration Register (SD only)
+ date Manufacturing Date (from CID Register)
+ fwrev Firmware/Product Revision (from CID Register)
+ (SD and MMCv1 only)
+ hwrev Hardware/Product Revision (from CID Register)
+ (SD and MMCv1 only)
+ manfid Manufacturer ID (from CID Register)
+ name Product Name (from CID Register)
+ oemid OEM/Application ID (from CID Register)
+ prv Product Revision (from CID Register)
+ (SD and MMCv4 only)
+ serial Product Serial Number (from CID Register)
+ erase_size Erase group size
+ preferred_erase_size Preferred erase size
+ raw_rpmb_size_mult RPMB partition size
+ rel_sectors Reliable write sector count
+ ocr Operation Conditions Register
+ dsr Driver Stage Register
+ cmdq_en Command Queue enabled:
+
+ 1 => enabled, 0 => not enabled
+ ====================== ===============================================
+
+Note on Erase Size and Preferred Erase Size:
+
+ "erase_size" is the minimum size, in bytes, of an erase
+ operation. For MMC, "erase_size" is the erase group size
+ reported by the card. Note that "erase_size" does not apply
+ to trim or secure trim operations where the minimum size is
+ always one 512 byte sector. For SD, "erase_size" is 512
+ if the card is block-addressed, 0 otherwise.
+
+ SD/MMC cards can erase an arbitrarily large area up to and
+ including the whole card. When erasing a large area it may
+ be desirable to do it in smaller chunks for three reasons:
+
+ 1. A single erase command will make all other I/O on
+ the card wait. This is not a problem if the whole card
+ is being erased, but erasing one partition will make
+ I/O for another partition on the same card wait for the
+ duration of the erase - which could be a several
+ minutes.
+ 2. To be able to inform the user of erase progress.
+ 3. The erase timeout becomes too large to be very
+ useful. Because the erase timeout contains a margin
+ which is multiplied by the size of the erase area,
+ the value can end up being several minutes for large
+ areas.
+
+ "erase_size" is not the most efficient unit to erase
+ (especially for SD where it is just one sector),
+ hence "preferred_erase_size" provides a good chunk
+ size for erasing large areas.
+
+ For MMC, "preferred_erase_size" is the high-capacity
+ erase size if a card specifies one, otherwise it is
+ based on the capacity of the card.
+
+ For SD, "preferred_erase_size" is the allocation unit
+ size specified by the card.
+
+ "preferred_erase_size" is in bytes.
+
+Note on raw_rpmb_size_mult:
+
+ "raw_rpmb_size_mult" is a multiple of 128kB block.
+
+ RPMB size in byte is calculated by using the following equation:
+
+ RPMB partition size = 128kB x raw_rpmb_size_mult
diff --git a/Documentation/driver-api/mmc/mmc-dev-parts.rst b/Documentation/driver-api/mmc/mmc-dev-parts.rst
new file mode 100644
index 000000000000..995922f1f744
--- /dev/null
+++ b/Documentation/driver-api/mmc/mmc-dev-parts.rst
@@ -0,0 +1,41 @@
+============================
+SD and MMC Device Partitions
+============================
+
+Device partitions are additional logical block devices present on the
+SD/MMC device.
+
+As of this writing, MMC boot partitions as supported and exposed as
+/dev/mmcblkXboot0 and /dev/mmcblkXboot1, where X is the index of the
+parent /dev/mmcblkX.
+
+MMC Boot Partitions
+===================
+
+Read and write access is provided to the two MMC boot partitions. Due to
+the sensitive nature of the boot partition contents, which often store
+a bootloader or bootloader configuration tables crucial to booting the
+platform, write access is disabled by default to reduce the chance of
+accidental bricking.
+
+To enable write access to /dev/mmcblkXbootY, disable the forced read-only
+access with::
+
+ echo 0 > /sys/block/mmcblkXbootY/force_ro
+
+To re-enable read-only access::
+
+ echo 1 > /sys/block/mmcblkXbootY/force_ro
+
+The boot partitions can also be locked read only until the next power on,
+with::
+
+ echo 1 > /sys/block/mmcblkXbootY/ro_lock_until_next_power_on
+
+This is a feature of the card and not of the kernel. If the card does
+not support boot partition locking, the file will not exist. If the
+feature has been disabled on the card, the file will be read-only.
+
+The boot partitions can also be locked permanently, but this feature is
+not accessible through sysfs in order to avoid accidental or malicious
+bricking.
diff --git a/Documentation/driver-api/mmc/mmc-tools.rst b/Documentation/driver-api/mmc/mmc-tools.rst
new file mode 100644
index 000000000000..54406093768b
--- /dev/null
+++ b/Documentation/driver-api/mmc/mmc-tools.rst
@@ -0,0 +1,37 @@
+======================
+MMC tools introduction
+======================
+
+There is one MMC test tools called mmc-utils, which is maintained by Chris Ball,
+you can find it at the below public git repository:
+
+ http://git.kernel.org/cgit/linux/kernel/git/cjb/mmc-utils.git/
+
+Functions
+=========
+
+The mmc-utils tools can do the following:
+
+ - Print and parse extcsd data.
+ - Determine the eMMC writeprotect status.
+ - Set the eMMC writeprotect status.
+ - Set the eMMC data sector size to 4KB by disabling emulation.
+ - Create general purpose partition.
+ - Enable the enhanced user area.
+ - Enable write reliability per partition.
+ - Print the response to STATUS_SEND (CMD13).
+ - Enable the boot partition.
+ - Set Boot Bus Conditions.
+ - Enable the eMMC BKOPS feature.
+ - Permanently enable the eMMC H/W Reset feature.
+ - Permanently disable the eMMC H/W Reset feature.
+ - Send Sanitize command.
+ - Program authentication key for the device.
+ - Counter value for the rpmb device will be read to stdout.
+ - Read from rpmb device to output.
+ - Write to rpmb device from data file.
+ - Enable the eMMC cache feature.
+ - Disable the eMMC cache feature.
+ - Print and parse CID data.
+ - Print and parse CSD data.
+ - Print and parse SCR data.
diff --git a/Documentation/driver-api/mtd/index.rst b/Documentation/driver-api/mtd/index.rst
new file mode 100644
index 000000000000..436ba5a851d7
--- /dev/null
+++ b/Documentation/driver-api/mtd/index.rst
@@ -0,0 +1,12 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+==============================
+Memory Technology Device (MTD)
+==============================
+
+.. toctree::
+ :maxdepth: 1
+
+ intel-spi
+ nand_ecc
+ spi-nor
diff --git a/Documentation/driver-api/mtd/intel-spi.rst b/Documentation/driver-api/mtd/intel-spi.rst
new file mode 100644
index 000000000000..0e6d9cd5388d
--- /dev/null
+++ b/Documentation/driver-api/mtd/intel-spi.rst
@@ -0,0 +1,90 @@
+==============================
+Upgrading BIOS using intel-spi
+==============================
+
+Many Intel CPUs like Baytrail and Braswell include SPI serial flash host
+controller which is used to hold BIOS and other platform specific data.
+Since contents of the SPI serial flash is crucial for machine to function,
+it is typically protected by different hardware protection mechanisms to
+avoid accidental (or on purpose) overwrite of the content.
+
+Not all manufacturers protect the SPI serial flash, mainly because it
+allows upgrading the BIOS image directly from an OS.
+
+The intel-spi driver makes it possible to read and write the SPI serial
+flash, if certain protection bits are not set and locked. If it finds
+any of them set, the whole MTD device is made read-only to prevent
+partial overwrites. By default the driver exposes SPI serial flash
+contents as read-only but it can be changed from kernel command line,
+passing "intel-spi.writeable=1".
+
+Please keep in mind that overwriting the BIOS image on SPI serial flash
+might render the machine unbootable and requires special equipment like
+Dediprog to revive. You have been warned!
+
+Below are the steps how to upgrade MinnowBoard MAX BIOS directly from
+Linux.
+
+ 1) Download and extract the latest Minnowboard MAX BIOS SPI image
+ [1]. At the time writing this the latest image is v92.
+
+ 2) Install mtd-utils package [2]. We need this in order to erase the SPI
+ serial flash. Distros like Debian and Fedora have this prepackaged with
+ name "mtd-utils".
+
+ 3) Add "intel-spi.writeable=1" to the kernel command line and reboot
+ the board (you can also reload the driver passing "writeable=1" as
+ module parameter to modprobe).
+
+ 4) Once the board is up and running again, find the right MTD partition
+ (it is named as "BIOS")::
+
+ # cat /proc/mtd
+ dev: size erasesize name
+ mtd0: 00800000 00001000 "BIOS"
+
+ So here it will be /dev/mtd0 but it may vary.
+
+ 5) Make backup of the existing image first::
+
+ # dd if=/dev/mtd0ro of=bios.bak
+ 16384+0 records in
+ 16384+0 records out
+ 8388608 bytes (8.4 MB) copied, 10.0269 s, 837 kB/s
+
+ 6) Verify the backup:
+
+ # sha1sum /dev/mtd0ro bios.bak
+ fdbb011920572ca6c991377c4b418a0502668b73 /dev/mtd0ro
+ fdbb011920572ca6c991377c4b418a0502668b73 bios.bak
+
+ The SHA1 sums must match. Otherwise do not continue any further!
+
+ 7) Erase the SPI serial flash. After this step, do not reboot the
+ board! Otherwise it will not start anymore::
+
+ # flash_erase /dev/mtd0 0 0
+ Erasing 4 Kibyte @ 7ff000 -- 100 % complete
+
+ 8) Once completed without errors you can write the new BIOS image:
+
+ # dd if=MNW2MAX1.X64.0092.R01.1605221712.bin of=/dev/mtd0
+
+ 9) Verify that the new content of the SPI serial flash matches the new
+ BIOS image::
+
+ # sha1sum /dev/mtd0ro MNW2MAX1.X64.0092.R01.1605221712.bin
+ 9b4df9e4be2057fceec3a5529ec3d950836c87a2 /dev/mtd0ro
+ 9b4df9e4be2057fceec3a5529ec3d950836c87a2 MNW2MAX1.X64.0092.R01.1605221712.bin
+
+ The SHA1 sums should match.
+
+ 10) Now you can reboot your board and observe the new BIOS starting up
+ properly.
+
+References
+----------
+
+[1] https://firmware.intel.com/sites/default/files/MinnowBoard%2EMAX_%2EX64%2E92%2ER01%2Ezip
+
+[2] http://www.linux-mtd.infradead.org/
diff --git a/Documentation/driver-api/mtd/nand_ecc.rst b/Documentation/driver-api/mtd/nand_ecc.rst
new file mode 100644
index 000000000000..e8d3c53a5056
--- /dev/null
+++ b/Documentation/driver-api/mtd/nand_ecc.rst
@@ -0,0 +1,763 @@
+==========================
+NAND Error-correction Code
+==========================
+
+Introduction
+============
+
+Having looked at the linux mtd/nand driver and more specific at nand_ecc.c
+I felt there was room for optimisation. I bashed the code for a few hours
+performing tricks like table lookup removing superfluous code etc.
+After that the speed was increased by 35-40%.
+Still I was not too happy as I felt there was additional room for improvement.
+
+Bad! I was hooked.
+I decided to annotate my steps in this file. Perhaps it is useful to someone
+or someone learns something from it.
+
+
+The problem
+===========
+
+NAND flash (at least SLC one) typically has sectors of 256 bytes.
+However NAND flash is not extremely reliable so some error detection
+(and sometimes correction) is needed.
+
+This is done by means of a Hamming code. I'll try to explain it in
+laymans terms (and apologies to all the pro's in the field in case I do
+not use the right terminology, my coding theory class was almost 30
+years ago, and I must admit it was not one of my favourites).
+
+As I said before the ecc calculation is performed on sectors of 256
+bytes. This is done by calculating several parity bits over the rows and
+columns. The parity used is even parity which means that the parity bit = 1
+if the data over which the parity is calculated is 1 and the parity bit = 0
+if the data over which the parity is calculated is 0. So the total
+number of bits over the data over which the parity is calculated + the
+parity bit is even. (see wikipedia if you can't follow this).
+Parity is often calculated by means of an exclusive or operation,
+sometimes also referred to as xor. In C the operator for xor is ^
+
+Back to ecc.
+Let's give a small figure:
+
+========= ==== ==== ==== ==== ==== ==== ==== ==== === === === === ====
+byte 0: bit7 bit6 bit5 bit4 bit3 bit2 bit1 bit0 rp0 rp2 rp4 ... rp14
+byte 1: bit7 bit6 bit5 bit4 bit3 bit2 bit1 bit0 rp1 rp2 rp4 ... rp14
+byte 2: bit7 bit6 bit5 bit4 bit3 bit2 bit1 bit0 rp0 rp3 rp4 ... rp14
+byte 3: bit7 bit6 bit5 bit4 bit3 bit2 bit1 bit0 rp1 rp3 rp4 ... rp14
+byte 4: bit7 bit6 bit5 bit4 bit3 bit2 bit1 bit0 rp0 rp2 rp5 ... rp14
+...
+byte 254: bit7 bit6 bit5 bit4 bit3 bit2 bit1 bit0 rp0 rp3 rp5 ... rp15
+byte 255: bit7 bit6 bit5 bit4 bit3 bit2 bit1 bit0 rp1 rp3 rp5 ... rp15
+ cp1 cp0 cp1 cp0 cp1 cp0 cp1 cp0
+ cp3 cp3 cp2 cp2 cp3 cp3 cp2 cp2
+ cp5 cp5 cp5 cp5 cp4 cp4 cp4 cp4
+========= ==== ==== ==== ==== ==== ==== ==== ==== === === === === ====
+
+This figure represents a sector of 256 bytes.
+cp is my abbreviation for column parity, rp for row parity.
+
+Let's start to explain column parity.
+
+- cp0 is the parity that belongs to all bit0, bit2, bit4, bit6.
+
+ so the sum of all bit0, bit2, bit4 and bit6 values + cp0 itself is even.
+
+Similarly cp1 is the sum of all bit1, bit3, bit5 and bit7.
+
+- cp2 is the parity over bit0, bit1, bit4 and bit5
+- cp3 is the parity over bit2, bit3, bit6 and bit7.
+- cp4 is the parity over bit0, bit1, bit2 and bit3.
+- cp5 is the parity over bit4, bit5, bit6 and bit7.
+
+Note that each of cp0 .. cp5 is exactly one bit.
+
+Row parity actually works almost the same.
+
+- rp0 is the parity of all even bytes (0, 2, 4, 6, ... 252, 254)
+- rp1 is the parity of all odd bytes (1, 3, 5, 7, ..., 253, 255)
+- rp2 is the parity of all bytes 0, 1, 4, 5, 8, 9, ...
+ (so handle two bytes, then skip 2 bytes).
+- rp3 is covers the half rp2 does not cover (bytes 2, 3, 6, 7, 10, 11, ...)
+- for rp4 the rule is cover 4 bytes, skip 4 bytes, cover 4 bytes, skip 4 etc.
+
+ so rp4 calculates parity over bytes 0, 1, 2, 3, 8, 9, 10, 11, 16, ...)
+- and rp5 covers the other half, so bytes 4, 5, 6, 7, 12, 13, 14, 15, 20, ..
+
+The story now becomes quite boring. I guess you get the idea.
+
+- rp6 covers 8 bytes then skips 8 etc
+- rp7 skips 8 bytes then covers 8 etc
+- rp8 covers 16 bytes then skips 16 etc
+- rp9 skips 16 bytes then covers 16 etc
+- rp10 covers 32 bytes then skips 32 etc
+- rp11 skips 32 bytes then covers 32 etc
+- rp12 covers 64 bytes then skips 64 etc
+- rp13 skips 64 bytes then covers 64 etc
+- rp14 covers 128 bytes then skips 128
+- rp15 skips 128 bytes then covers 128
+
+In the end the parity bits are grouped together in three bytes as
+follows:
+
+===== ===== ===== ===== ===== ===== ===== ===== =====
+ECC Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
+===== ===== ===== ===== ===== ===== ===== ===== =====
+ECC 0 rp07 rp06 rp05 rp04 rp03 rp02 rp01 rp00
+ECC 1 rp15 rp14 rp13 rp12 rp11 rp10 rp09 rp08
+ECC 2 cp5 cp4 cp3 cp2 cp1 cp0 1 1
+===== ===== ===== ===== ===== ===== ===== ===== =====
+
+I detected after writing this that ST application note AN1823
+(http://www.st.com/stonline/) gives a much
+nicer picture.(but they use line parity as term where I use row parity)
+Oh well, I'm graphically challenged, so suffer with me for a moment :-)
+
+And I could not reuse the ST picture anyway for copyright reasons.
+
+
+Attempt 0
+=========
+
+Implementing the parity calculation is pretty simple.
+In C pseudocode::
+
+ for (i = 0; i < 256; i++)
+ {
+ if (i & 0x01)
+ rp1 = bit7 ^ bit6 ^ bit5 ^ bit4 ^ bit3 ^ bit2 ^ bit1 ^ bit0 ^ rp1;
+ else
+ rp0 = bit7 ^ bit6 ^ bit5 ^ bit4 ^ bit3 ^ bit2 ^ bit1 ^ bit0 ^ rp0;
+ if (i & 0x02)
+ rp3 = bit7 ^ bit6 ^ bit5 ^ bit4 ^ bit3 ^ bit2 ^ bit1 ^ bit0 ^ rp3;
+ else
+ rp2 = bit7 ^ bit6 ^ bit5 ^ bit4 ^ bit3 ^ bit2 ^ bit1 ^ bit0 ^ rp2;
+ if (i & 0x04)
+ rp5 = bit7 ^ bit6 ^ bit5 ^ bit4 ^ bit3 ^ bit2 ^ bit1 ^ bit0 ^ rp5;
+ else
+ rp4 = bit7 ^ bit6 ^ bit5 ^ bit4 ^ bit3 ^ bit2 ^ bit1 ^ bit0 ^ rp4;
+ if (i & 0x08)
+ rp7 = bit7 ^ bit6 ^ bit5 ^ bit4 ^ bit3 ^ bit2 ^ bit1 ^ bit0 ^ rp7;
+ else
+ rp6 = bit7 ^ bit6 ^ bit5 ^ bit4 ^ bit3 ^ bit2 ^ bit1 ^ bit0 ^ rp6;
+ if (i & 0x10)
+ rp9 = bit7 ^ bit6 ^ bit5 ^ bit4 ^ bit3 ^ bit2 ^ bit1 ^ bit0 ^ rp9;
+ else
+ rp8 = bit7 ^ bit6 ^ bit5 ^ bit4 ^ bit3 ^ bit2 ^ bit1 ^ bit0 ^ rp8;
+ if (i & 0x20)
+ rp11 = bit7 ^ bit6 ^ bit5 ^ bit4 ^ bit3 ^ bit2 ^ bit1 ^ bit0 ^ rp11;
+ else
+ rp10 = bit7 ^ bit6 ^ bit5 ^ bit4 ^ bit3 ^ bit2 ^ bit1 ^ bit0 ^ rp10;
+ if (i & 0x40)
+ rp13 = bit7 ^ bit6 ^ bit5 ^ bit4 ^ bit3 ^ bit2 ^ bit1 ^ bit0 ^ rp13;
+ else
+ rp12 = bit7 ^ bit6 ^ bit5 ^ bit4 ^ bit3 ^ bit2 ^ bit1 ^ bit0 ^ rp12;
+ if (i & 0x80)
+ rp15 = bit7 ^ bit6 ^ bit5 ^ bit4 ^ bit3 ^ bit2 ^ bit1 ^ bit0 ^ rp15;
+ else
+ rp14 = bit7 ^ bit6 ^ bit5 ^ bit4 ^ bit3 ^ bit2 ^ bit1 ^ bit0 ^ rp14;
+ cp0 = bit6 ^ bit4 ^ bit2 ^ bit0 ^ cp0;
+ cp1 = bit7 ^ bit5 ^ bit3 ^ bit1 ^ cp1;
+ cp2 = bit5 ^ bit4 ^ bit1 ^ bit0 ^ cp2;
+ cp3 = bit7 ^ bit6 ^ bit3 ^ bit2 ^ cp3
+ cp4 = bit3 ^ bit2 ^ bit1 ^ bit0 ^ cp4
+ cp5 = bit7 ^ bit6 ^ bit5 ^ bit4 ^ cp5
+ }
+
+
+Analysis 0
+==========
+
+C does have bitwise operators but not really operators to do the above
+efficiently (and most hardware has no such instructions either).
+Therefore without implementing this it was clear that the code above was
+not going to bring me a Nobel prize :-)
+
+Fortunately the exclusive or operation is commutative, so we can combine
+the values in any order. So instead of calculating all the bits
+individually, let us try to rearrange things.
+For the column parity this is easy. We can just xor the bytes and in the
+end filter out the relevant bits. This is pretty nice as it will bring
+all cp calculation out of the for loop.
+
+Similarly we can first xor the bytes for the various rows.
+This leads to:
+
+
+Attempt 1
+=========
+
+::
+
+ const char parity[256] = {
+ 0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0,
+ 1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1,
+ 1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1,
+ 0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0,
+ 1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1,
+ 0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0,
+ 0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0,
+ 1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1,
+ 1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1,
+ 0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0,
+ 0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0,
+ 1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1,
+ 0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0,
+ 1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1,
+ 1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1,
+ 0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0
+ };
+
+ void ecc1(const unsigned char *buf, unsigned char *code)
+ {
+ int i;
+ const unsigned char *bp = buf;
+ unsigned char cur;
+ unsigned char rp0, rp1, rp2, rp3, rp4, rp5, rp6, rp7;
+ unsigned char rp8, rp9, rp10, rp11, rp12, rp13, rp14, rp15;
+ unsigned char par;
+
+ par = 0;
+ rp0 = 0; rp1 = 0; rp2 = 0; rp3 = 0;
+ rp4 = 0; rp5 = 0; rp6 = 0; rp7 = 0;
+ rp8 = 0; rp9 = 0; rp10 = 0; rp11 = 0;
+ rp12 = 0; rp13 = 0; rp14 = 0; rp15 = 0;
+
+ for (i = 0; i < 256; i++)
+ {
+ cur = *bp++;
+ par ^= cur;
+ if (i & 0x01) rp1 ^= cur; else rp0 ^= cur;
+ if (i & 0x02) rp3 ^= cur; else rp2 ^= cur;
+ if (i & 0x04) rp5 ^= cur; else rp4 ^= cur;
+ if (i & 0x08) rp7 ^= cur; else rp6 ^= cur;
+ if (i & 0x10) rp9 ^= cur; else rp8 ^= cur;
+ if (i & 0x20) rp11 ^= cur; else rp10 ^= cur;
+ if (i & 0x40) rp13 ^= cur; else rp12 ^= cur;
+ if (i & 0x80) rp15 ^= cur; else rp14 ^= cur;
+ }
+ code[0] =
+ (parity[rp7] << 7) |
+ (parity[rp6] << 6) |
+ (parity[rp5] << 5) |
+ (parity[rp4] << 4) |
+ (parity[rp3] << 3) |
+ (parity[rp2] << 2) |
+ (parity[rp1] << 1) |
+ (parity[rp0]);
+ code[1] =
+ (parity[rp15] << 7) |
+ (parity[rp14] << 6) |
+ (parity[rp13] << 5) |
+ (parity[rp12] << 4) |
+ (parity[rp11] << 3) |
+ (parity[rp10] << 2) |
+ (parity[rp9] << 1) |
+ (parity[rp8]);
+ code[2] =
+ (parity[par & 0xf0] << 7) |
+ (parity[par & 0x0f] << 6) |
+ (parity[par & 0xcc] << 5) |
+ (parity[par & 0x33] << 4) |
+ (parity[par & 0xaa] << 3) |
+ (parity[par & 0x55] << 2);
+ code[0] = ~code[0];
+ code[1] = ~code[1];
+ code[2] = ~code[2];
+ }
+
+Still pretty straightforward. The last three invert statements are there to
+give a checksum of 0xff 0xff 0xff for an empty flash. In an empty flash
+all data is 0xff, so the checksum then matches.
+
+I also introduced the parity lookup. I expected this to be the fastest
+way to calculate the parity, but I will investigate alternatives later
+on.
+
+
+Analysis 1
+==========
+
+The code works, but is not terribly efficient. On my system it took
+almost 4 times as much time as the linux driver code. But hey, if it was
+*that* easy this would have been done long before.
+No pain. no gain.
+
+Fortunately there is plenty of room for improvement.
+
+In step 1 we moved from bit-wise calculation to byte-wise calculation.
+However in C we can also use the unsigned long data type and virtually
+every modern microprocessor supports 32 bit operations, so why not try
+to write our code in such a way that we process data in 32 bit chunks.
+
+Of course this means some modification as the row parity is byte by
+byte. A quick analysis:
+for the column parity we use the par variable. When extending to 32 bits
+we can in the end easily calculate rp0 and rp1 from it.
+(because par now consists of 4 bytes, contributing to rp1, rp0, rp1, rp0
+respectively, from MSB to LSB)
+also rp2 and rp3 can be easily retrieved from par as rp3 covers the
+first two MSBs and rp2 covers the last two LSBs.
+
+Note that of course now the loop is executed only 64 times (256/4).
+And note that care must taken wrt byte ordering. The way bytes are
+ordered in a long is machine dependent, and might affect us.
+Anyway, if there is an issue: this code is developed on x86 (to be
+precise: a DELL PC with a D920 Intel CPU)
+
+And of course the performance might depend on alignment, but I expect
+that the I/O buffers in the nand driver are aligned properly (and
+otherwise that should be fixed to get maximum performance).
+
+Let's give it a try...
+
+
+Attempt 2
+=========
+
+::
+
+ extern const char parity[256];
+
+ void ecc2(const unsigned char *buf, unsigned char *code)
+ {
+ int i;
+ const unsigned long *bp = (unsigned long *)buf;
+ unsigned long cur;
+ unsigned long rp0, rp1, rp2, rp3, rp4, rp5, rp6, rp7;
+ unsigned long rp8, rp9, rp10, rp11, rp12, rp13, rp14, rp15;
+ unsigned long par;
+
+ par = 0;
+ rp0 = 0; rp1 = 0; rp2 = 0; rp3 = 0;
+ rp4 = 0; rp5 = 0; rp6 = 0; rp7 = 0;
+ rp8 = 0; rp9 = 0; rp10 = 0; rp11 = 0;
+ rp12 = 0; rp13 = 0; rp14 = 0; rp15 = 0;
+
+ for (i = 0; i < 64; i++)
+ {
+ cur = *bp++;
+ par ^= cur;
+ if (i & 0x01) rp5 ^= cur; else rp4 ^= cur;
+ if (i & 0x02) rp7 ^= cur; else rp6 ^= cur;
+ if (i & 0x04) rp9 ^= cur; else rp8 ^= cur;
+ if (i & 0x08) rp11 ^= cur; else rp10 ^= cur;
+ if (i & 0x10) rp13 ^= cur; else rp12 ^= cur;
+ if (i & 0x20) rp15 ^= cur; else rp14 ^= cur;
+ }
+ /*
+ we need to adapt the code generation for the fact that rp vars are now
+ long; also the column parity calculation needs to be changed.
+ we'll bring rp4 to 15 back to single byte entities by shifting and
+ xoring
+ */
+ rp4 ^= (rp4 >> 16); rp4 ^= (rp4 >> 8); rp4 &= 0xff;
+ rp5 ^= (rp5 >> 16); rp5 ^= (rp5 >> 8); rp5 &= 0xff;
+ rp6 ^= (rp6 >> 16); rp6 ^= (rp6 >> 8); rp6 &= 0xff;
+ rp7 ^= (rp7 >> 16); rp7 ^= (rp7 >> 8); rp7 &= 0xff;
+ rp8 ^= (rp8 >> 16); rp8 ^= (rp8 >> 8); rp8 &= 0xff;
+ rp9 ^= (rp9 >> 16); rp9 ^= (rp9 >> 8); rp9 &= 0xff;
+ rp10 ^= (rp10 >> 16); rp10 ^= (rp10 >> 8); rp10 &= 0xff;
+ rp11 ^= (rp11 >> 16); rp11 ^= (rp11 >> 8); rp11 &= 0xff;
+ rp12 ^= (rp12 >> 16); rp12 ^= (rp12 >> 8); rp12 &= 0xff;
+ rp13 ^= (rp13 >> 16); rp13 ^= (rp13 >> 8); rp13 &= 0xff;
+ rp14 ^= (rp14 >> 16); rp14 ^= (rp14 >> 8); rp14 &= 0xff;
+ rp15 ^= (rp15 >> 16); rp15 ^= (rp15 >> 8); rp15 &= 0xff;
+ rp3 = (par >> 16); rp3 ^= (rp3 >> 8); rp3 &= 0xff;
+ rp2 = par & 0xffff; rp2 ^= (rp2 >> 8); rp2 &= 0xff;
+ par ^= (par >> 16);
+ rp1 = (par >> 8); rp1 &= 0xff;
+ rp0 = (par & 0xff);
+ par ^= (par >> 8); par &= 0xff;
+
+ code[0] =
+ (parity[rp7] << 7) |
+ (parity[rp6] << 6) |
+ (parity[rp5] << 5) |
+ (parity[rp4] << 4) |
+ (parity[rp3] << 3) |
+ (parity[rp2] << 2) |
+ (parity[rp1] << 1) |
+ (parity[rp0]);
+ code[1] =
+ (parity[rp15] << 7) |
+ (parity[rp14] << 6) |
+ (parity[rp13] << 5) |
+ (parity[rp12] << 4) |
+ (parity[rp11] << 3) |
+ (parity[rp10] << 2) |
+ (parity[rp9] << 1) |
+ (parity[rp8]);
+ code[2] =
+ (parity[par & 0xf0] << 7) |
+ (parity[par & 0x0f] << 6) |
+ (parity[par & 0xcc] << 5) |
+ (parity[par & 0x33] << 4) |
+ (parity[par & 0xaa] << 3) |
+ (parity[par & 0x55] << 2);
+ code[0] = ~code[0];
+ code[1] = ~code[1];
+ code[2] = ~code[2];
+ }
+
+The parity array is not shown any more. Note also that for these
+examples I kinda deviated from my regular programming style by allowing
+multiple statements on a line, not using { } in then and else blocks
+with only a single statement and by using operators like ^=
+
+
+Analysis 2
+==========
+
+The code (of course) works, and hurray: we are a little bit faster than
+the linux driver code (about 15%). But wait, don't cheer too quickly.
+There is more to be gained.
+If we look at e.g. rp14 and rp15 we see that we either xor our data with
+rp14 or with rp15. However we also have par which goes over all data.
+This means there is no need to calculate rp14 as it can be calculated from
+rp15 through rp14 = par ^ rp15, because par = rp14 ^ rp15;
+(or if desired we can avoid calculating rp15 and calculate it from
+rp14). That is why some places refer to inverse parity.
+Of course the same thing holds for rp4/5, rp6/7, rp8/9, rp10/11 and rp12/13.
+Effectively this means we can eliminate the else clause from the if
+statements. Also we can optimise the calculation in the end a little bit
+by going from long to byte first. Actually we can even avoid the table
+lookups
+
+Attempt 3
+=========
+
+Odd replaced::
+
+ if (i & 0x01) rp5 ^= cur; else rp4 ^= cur;
+ if (i & 0x02) rp7 ^= cur; else rp6 ^= cur;
+ if (i & 0x04) rp9 ^= cur; else rp8 ^= cur;
+ if (i & 0x08) rp11 ^= cur; else rp10 ^= cur;
+ if (i & 0x10) rp13 ^= cur; else rp12 ^= cur;
+ if (i & 0x20) rp15 ^= cur; else rp14 ^= cur;
+
+with::
+
+ if (i & 0x01) rp5 ^= cur;
+ if (i & 0x02) rp7 ^= cur;
+ if (i & 0x04) rp9 ^= cur;
+ if (i & 0x08) rp11 ^= cur;
+ if (i & 0x10) rp13 ^= cur;
+ if (i & 0x20) rp15 ^= cur;
+
+and outside the loop added::
+
+ rp4 = par ^ rp5;
+ rp6 = par ^ rp7;
+ rp8 = par ^ rp9;
+ rp10 = par ^ rp11;
+ rp12 = par ^ rp13;
+ rp14 = par ^ rp15;
+
+And after that the code takes about 30% more time, although the number of
+statements is reduced. This is also reflected in the assembly code.
+
+
+Analysis 3
+==========
+
+Very weird. Guess it has to do with caching or instruction parallellism
+or so. I also tried on an eeePC (Celeron, clocked at 900 Mhz). Interesting
+observation was that this one is only 30% slower (according to time)
+executing the code as my 3Ghz D920 processor.
+
+Well, it was expected not to be easy so maybe instead move to a
+different track: let's move back to the code from attempt2 and do some
+loop unrolling. This will eliminate a few if statements. I'll try
+different amounts of unrolling to see what works best.
+
+
+Attempt 4
+=========
+
+Unrolled the loop 1, 2, 3 and 4 times.
+For 4 the code starts with::
+
+ for (i = 0; i < 4; i++)
+ {
+ cur = *bp++;
+ par ^= cur;
+ rp4 ^= cur;
+ rp6 ^= cur;
+ rp8 ^= cur;
+ rp10 ^= cur;
+ if (i & 0x1) rp13 ^= cur; else rp12 ^= cur;
+ if (i & 0x2) rp15 ^= cur; else rp14 ^= cur;
+ cur = *bp++;
+ par ^= cur;
+ rp5 ^= cur;
+ rp6 ^= cur;
+ ...
+
+
+Analysis 4
+==========
+
+Unrolling once gains about 15%
+
+Unrolling twice keeps the gain at about 15%
+
+Unrolling three times gives a gain of 30% compared to attempt 2.
+
+Unrolling four times gives a marginal improvement compared to unrolling
+three times.
+
+I decided to proceed with a four time unrolled loop anyway. It was my gut
+feeling that in the next steps I would obtain additional gain from it.
+
+The next step was triggered by the fact that par contains the xor of all
+bytes and rp4 and rp5 each contain the xor of half of the bytes.
+So in effect par = rp4 ^ rp5. But as xor is commutative we can also say
+that rp5 = par ^ rp4. So no need to keep both rp4 and rp5 around. We can
+eliminate rp5 (or rp4, but I already foresaw another optimisation).
+The same holds for rp6/7, rp8/9, rp10/11 rp12/13 and rp14/15.
+
+
+Attempt 5
+=========
+
+Effectively so all odd digit rp assignments in the loop were removed.
+This included the else clause of the if statements.
+Of course after the loop we need to correct things by adding code like::
+
+ rp5 = par ^ rp4;
+
+Also the initial assignments (rp5 = 0; etc) could be removed.
+Along the line I also removed the initialisation of rp0/1/2/3.
+
+
+Analysis 5
+==========
+
+Measurements showed this was a good move. The run-time roughly halved
+compared with attempt 4 with 4 times unrolled, and we only require 1/3rd
+of the processor time compared to the current code in the linux kernel.
+
+However, still I thought there was more. I didn't like all the if
+statements. Why not keep a running parity and only keep the last if
+statement. Time for yet another version!
+
+
+Attempt 6
+=========
+
+THe code within the for loop was changed to::
+
+ for (i = 0; i < 4; i++)
+ {
+ cur = *bp++; tmppar = cur; rp4 ^= cur;
+ cur = *bp++; tmppar ^= cur; rp6 ^= tmppar;
+ cur = *bp++; tmppar ^= cur; rp4 ^= cur;
+ cur = *bp++; tmppar ^= cur; rp8 ^= tmppar;
+
+ cur = *bp++; tmppar ^= cur; rp4 ^= cur; rp6 ^= cur;
+ cur = *bp++; tmppar ^= cur; rp6 ^= cur;
+ cur = *bp++; tmppar ^= cur; rp4 ^= cur;
+ cur = *bp++; tmppar ^= cur; rp10 ^= tmppar;
+
+ cur = *bp++; tmppar ^= cur; rp4 ^= cur; rp6 ^= cur; rp8 ^= cur;
+ cur = *bp++; tmppar ^= cur; rp6 ^= cur; rp8 ^= cur;
+ cur = *bp++; tmppar ^= cur; rp4 ^= cur; rp8 ^= cur;
+ cur = *bp++; tmppar ^= cur; rp8 ^= cur;
+
+ cur = *bp++; tmppar ^= cur; rp4 ^= cur; rp6 ^= cur;
+ cur = *bp++; tmppar ^= cur; rp6 ^= cur;
+ cur = *bp++; tmppar ^= cur; rp4 ^= cur;
+ cur = *bp++; tmppar ^= cur;
+
+ par ^= tmppar;
+ if ((i & 0x1) == 0) rp12 ^= tmppar;
+ if ((i & 0x2) == 0) rp14 ^= tmppar;
+ }
+
+As you can see tmppar is used to accumulate the parity within a for
+iteration. In the last 3 statements is added to par and, if needed,
+to rp12 and rp14.
+
+While making the changes I also found that I could exploit that tmppar
+contains the running parity for this iteration. So instead of having:
+rp4 ^= cur; rp6 ^= cur;
+I removed the rp6 ^= cur; statement and did rp6 ^= tmppar; on next
+statement. A similar change was done for rp8 and rp10
+
+
+Analysis 6
+==========
+
+Measuring this code again showed big gain. When executing the original
+linux code 1 million times, this took about 1 second on my system.
+(using time to measure the performance). After this iteration I was back
+to 0.075 sec. Actually I had to decide to start measuring over 10
+million iterations in order not to lose too much accuracy. This one
+definitely seemed to be the jackpot!
+
+There is a little bit more room for improvement though. There are three
+places with statements::
+
+ rp4 ^= cur; rp6 ^= cur;
+
+It seems more efficient to also maintain a variable rp4_6 in the while
+loop; This eliminates 3 statements per loop. Of course after the loop we
+need to correct by adding::
+
+ rp4 ^= rp4_6;
+ rp6 ^= rp4_6
+
+Furthermore there are 4 sequential assignments to rp8. This can be
+encoded slightly more efficiently by saving tmppar before those 4 lines
+and later do rp8 = rp8 ^ tmppar ^ notrp8;
+(where notrp8 is the value of rp8 before those 4 lines).
+Again a use of the commutative property of xor.
+Time for a new test!
+
+
+Attempt 7
+=========
+
+The new code now looks like::
+
+ for (i = 0; i < 4; i++)
+ {
+ cur = *bp++; tmppar = cur; rp4 ^= cur;
+ cur = *bp++; tmppar ^= cur; rp6 ^= tmppar;
+ cur = *bp++; tmppar ^= cur; rp4 ^= cur;
+ cur = *bp++; tmppar ^= cur; rp8 ^= tmppar;
+
+ cur = *bp++; tmppar ^= cur; rp4_6 ^= cur;
+ cur = *bp++; tmppar ^= cur; rp6 ^= cur;
+ cur = *bp++; tmppar ^= cur; rp4 ^= cur;
+ cur = *bp++; tmppar ^= cur; rp10 ^= tmppar;
+
+ notrp8 = tmppar;
+ cur = *bp++; tmppar ^= cur; rp4_6 ^= cur;
+ cur = *bp++; tmppar ^= cur; rp6 ^= cur;
+ cur = *bp++; tmppar ^= cur; rp4 ^= cur;
+ cur = *bp++; tmppar ^= cur;
+ rp8 = rp8 ^ tmppar ^ notrp8;
+
+ cur = *bp++; tmppar ^= cur; rp4_6 ^= cur;
+ cur = *bp++; tmppar ^= cur; rp6 ^= cur;
+ cur = *bp++; tmppar ^= cur; rp4 ^= cur;
+ cur = *bp++; tmppar ^= cur;
+
+ par ^= tmppar;
+ if ((i & 0x1) == 0) rp12 ^= tmppar;
+ if ((i & 0x2) == 0) rp14 ^= tmppar;
+ }
+ rp4 ^= rp4_6;
+ rp6 ^= rp4_6;
+
+
+Not a big change, but every penny counts :-)
+
+
+Analysis 7
+==========
+
+Actually this made things worse. Not very much, but I don't want to move
+into the wrong direction. Maybe something to investigate later. Could
+have to do with caching again.
+
+Guess that is what there is to win within the loop. Maybe unrolling one
+more time will help. I'll keep the optimisations from 7 for now.
+
+
+Attempt 8
+=========
+
+Unrolled the loop one more time.
+
+
+Analysis 8
+==========
+
+This makes things worse. Let's stick with attempt 6 and continue from there.
+Although it seems that the code within the loop cannot be optimised
+further there is still room to optimize the generation of the ecc codes.
+We can simply calculate the total parity. If this is 0 then rp4 = rp5
+etc. If the parity is 1, then rp4 = !rp5;
+
+But if rp4 = rp5 we do not need rp5 etc. We can just write the even bits
+in the result byte and then do something like::
+
+ code[0] |= (code[0] << 1);
+
+Lets test this.
+
+
+Attempt 9
+=========
+
+Changed the code but again this slightly degrades performance. Tried all
+kind of other things, like having dedicated parity arrays to avoid the
+shift after parity[rp7] << 7; No gain.
+Change the lookup using the parity array by using shift operators (e.g.
+replace parity[rp7] << 7 with::
+
+ rp7 ^= (rp7 << 4);
+ rp7 ^= (rp7 << 2);
+ rp7 ^= (rp7 << 1);
+ rp7 &= 0x80;
+
+No gain.
+
+The only marginal change was inverting the parity bits, so we can remove
+the last three invert statements.
+
+Ah well, pity this does not deliver more. Then again 10 million
+iterations using the linux driver code takes between 13 and 13.5
+seconds, whereas my code now takes about 0.73 seconds for those 10
+million iterations. So basically I've improved the performance by a
+factor 18 on my system. Not that bad. Of course on different hardware
+you will get different results. No warranties!
+
+But of course there is no such thing as a free lunch. The codesize almost
+tripled (from 562 bytes to 1434 bytes). Then again, it is not that much.
+
+
+Correcting errors
+=================
+
+For correcting errors I again used the ST application note as a starter,
+but I also peeked at the existing code.
+
+The algorithm itself is pretty straightforward. Just xor the given and
+the calculated ecc. If all bytes are 0 there is no problem. If 11 bits
+are 1 we have one correctable bit error. If there is 1 bit 1, we have an
+error in the given ecc code.
+
+It proved to be fastest to do some table lookups. Performance gain
+introduced by this is about a factor 2 on my system when a repair had to
+be done, and 1% or so if no repair had to be done.
+
+Code size increased from 330 bytes to 686 bytes for this function.
+(gcc 4.2, -O3)
+
+
+Conclusion
+==========
+
+The gain when calculating the ecc is tremendous. Om my development hardware
+a speedup of a factor of 18 for ecc calculation was achieved. On a test on an
+embedded system with a MIPS core a factor 7 was obtained.
+
+On a test with a Linksys NSLU2 (ARMv5TE processor) the speedup was a factor
+5 (big endian mode, gcc 4.1.2, -O3)
+
+For correction not much gain could be obtained (as bitflips are rare). Then
+again there are also much less cycles spent there.
+
+It seems there is not much more gain possible in this, at least when
+programmed in C. Of course it might be possible to squeeze something more
+out of it with an assembler program, but due to pipeline behaviour etc
+this is very tricky (at least for intel hw).
+
+Author: Frans Meulenbroeks
+
+Copyright (C) 2008 Koninklijke Philips Electronics NV.
diff --git a/Documentation/driver-api/mtd/spi-nor.rst b/Documentation/driver-api/mtd/spi-nor.rst
new file mode 100644
index 000000000000..f5333e3bf486
--- /dev/null
+++ b/Documentation/driver-api/mtd/spi-nor.rst
@@ -0,0 +1,66 @@
+=================
+SPI NOR framework
+=================
+
+Part I - Why do we need this framework?
+---------------------------------------
+
+SPI bus controllers (drivers/spi/) only deal with streams of bytes; the bus
+controller operates agnostic of the specific device attached. However, some
+controllers (such as Freescale's QuadSPI controller) cannot easily handle
+arbitrary streams of bytes, but rather are designed specifically for SPI NOR.
+
+In particular, Freescale's QuadSPI controller must know the NOR commands to
+find the right LUT sequence. Unfortunately, the SPI subsystem has no notion of
+opcodes, addresses, or data payloads; a SPI controller simply knows to send or
+receive bytes (Tx and Rx). Therefore, we must define a new layering scheme under
+which the controller driver is aware of the opcodes, addressing, and other
+details of the SPI NOR protocol.
+
+Part II - How does the framework work?
+--------------------------------------
+
+This framework just adds a new layer between the MTD and the SPI bus driver.
+With this new layer, the SPI NOR controller driver does not depend on the
+m25p80 code anymore.
+
+Before this framework, the layer is like::
+
+ MTD
+ ------------------------
+ m25p80
+ ------------------------
+ SPI bus driver
+ ------------------------
+ SPI NOR chip
+
+ After this framework, the layer is like:
+ MTD
+ ------------------------
+ SPI NOR framework
+ ------------------------
+ m25p80
+ ------------------------
+ SPI bus driver
+ ------------------------
+ SPI NOR chip
+
+ With the SPI NOR controller driver (Freescale QuadSPI), it looks like:
+ MTD
+ ------------------------
+ SPI NOR framework
+ ------------------------
+ fsl-quadSPI
+ ------------------------
+ SPI NOR chip
+
+Part III - How can drivers use the framework?
+---------------------------------------------
+
+The main API is spi_nor_scan(). Before you call the hook, a driver should
+initialize the necessary fields for spi_nor{}. Please see
+drivers/mtd/spi-nor/spi-nor.c for detail. Please also refer to fsl-quadspi.c
+when you want to write a new driver for a SPI NOR controller.
+Another API is spi_nor_restore(), this is used to restore the status of SPI
+flash chip such as addressing mode. Call it whenever detach the driver from
+device or reboot the system.
diff --git a/Documentation/driver-api/nfc/index.rst b/Documentation/driver-api/nfc/index.rst
new file mode 100644
index 000000000000..b6e9eedbff29
--- /dev/null
+++ b/Documentation/driver-api/nfc/index.rst
@@ -0,0 +1,11 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+========================
+Near Field Communication
+========================
+
+.. toctree::
+ :maxdepth: 1
+
+ nfc-hci
+ nfc-pn544
diff --git a/Documentation/driver-api/nfc/nfc-hci.rst b/Documentation/driver-api/nfc/nfc-hci.rst
new file mode 100644
index 000000000000..eb8a1a14e919
--- /dev/null
+++ b/Documentation/driver-api/nfc/nfc-hci.rst
@@ -0,0 +1,311 @@
+========================
+HCI backend for NFC Core
+========================
+
+- Author: Eric Lapuyade, Samuel Ortiz
+- Contact: eric.lapuyade@intel.com, samuel.ortiz@intel.com
+
+General
+-------
+
+The HCI layer implements much of the ETSI TS 102 622 V10.2.0 specification. It
+enables easy writing of HCI-based NFC drivers. The HCI layer runs as an NFC Core
+backend, implementing an abstract nfc device and translating NFC Core API
+to HCI commands and events.
+
+HCI
+---
+
+HCI registers as an nfc device with NFC Core. Requests coming from userspace are
+routed through netlink sockets to NFC Core and then to HCI. From this point,
+they are translated in a sequence of HCI commands sent to the HCI layer in the
+host controller (the chip). Commands can be executed synchronously (the sending
+context blocks waiting for response) or asynchronously (the response is returned
+from HCI Rx context).
+HCI events can also be received from the host controller. They will be handled
+and a translation will be forwarded to NFC Core as needed. There are hooks to
+let the HCI driver handle proprietary events or override standard behavior.
+HCI uses 2 execution contexts:
+
+- one for executing commands : nfc_hci_msg_tx_work(). Only one command
+ can be executing at any given moment.
+- one for dispatching received events and commands : nfc_hci_msg_rx_work().
+
+HCI Session initialization
+--------------------------
+
+The Session initialization is an HCI standard which must unfortunately
+support proprietary gates. This is the reason why the driver will pass a list
+of proprietary gates that must be part of the session. HCI will ensure all
+those gates have pipes connected when the hci device is set up.
+In case the chip supports pre-opened gates and pseudo-static pipes, the driver
+can pass that information to HCI core.
+
+HCI Gates and Pipes
+-------------------
+
+A gate defines the 'port' where some service can be found. In order to access
+a service, one must create a pipe to that gate and open it. In this
+implementation, pipes are totally hidden. The public API only knows gates.
+This is consistent with the driver need to send commands to proprietary gates
+without knowing the pipe connected to it.
+
+Driver interface
+----------------
+
+A driver is generally written in two parts : the physical link management and
+the HCI management. This makes it easier to maintain a driver for a chip that
+can be connected using various phy (i2c, spi, ...)
+
+HCI Management
+--------------
+
+A driver would normally register itself with HCI and provide the following
+entry points::
+
+ struct nfc_hci_ops {
+ int (*open)(struct nfc_hci_dev *hdev);
+ void (*close)(struct nfc_hci_dev *hdev);
+ int (*hci_ready) (struct nfc_hci_dev *hdev);
+ int (*xmit) (struct nfc_hci_dev *hdev, struct sk_buff *skb);
+ int (*start_poll) (struct nfc_hci_dev *hdev,
+ u32 im_protocols, u32 tm_protocols);
+ int (*dep_link_up)(struct nfc_hci_dev *hdev, struct nfc_target *target,
+ u8 comm_mode, u8 *gb, size_t gb_len);
+ int (*dep_link_down)(struct nfc_hci_dev *hdev);
+ int (*target_from_gate) (struct nfc_hci_dev *hdev, u8 gate,
+ struct nfc_target *target);
+ int (*complete_target_discovered) (struct nfc_hci_dev *hdev, u8 gate,
+ struct nfc_target *target);
+ int (*im_transceive) (struct nfc_hci_dev *hdev,
+ struct nfc_target *target, struct sk_buff *skb,
+ data_exchange_cb_t cb, void *cb_context);
+ int (*tm_send)(struct nfc_hci_dev *hdev, struct sk_buff *skb);
+ int (*check_presence)(struct nfc_hci_dev *hdev,
+ struct nfc_target *target);
+ int (*event_received)(struct nfc_hci_dev *hdev, u8 gate, u8 event,
+ struct sk_buff *skb);
+ };
+
+- open() and close() shall turn the hardware on and off.
+- hci_ready() is an optional entry point that is called right after the hci
+ session has been set up. The driver can use it to do additional initialization
+ that must be performed using HCI commands.
+- xmit() shall simply write a frame to the physical link.
+- start_poll() is an optional entrypoint that shall set the hardware in polling
+ mode. This must be implemented only if the hardware uses proprietary gates or a
+ mechanism slightly different from the HCI standard.
+- dep_link_up() is called after a p2p target has been detected, to finish
+ the p2p connection setup with hardware parameters that need to be passed back
+ to nfc core.
+- dep_link_down() is called to bring the p2p link down.
+- target_from_gate() is an optional entrypoint to return the nfc protocols
+ corresponding to a proprietary gate.
+- complete_target_discovered() is an optional entry point to let the driver
+ perform additional proprietary processing necessary to auto activate the
+ discovered target.
+- im_transceive() must be implemented by the driver if proprietary HCI commands
+ are required to send data to the tag. Some tag types will require custom
+ commands, others can be written to using the standard HCI commands. The driver
+ can check the tag type and either do proprietary processing, or return 1 to ask
+ for standard processing. The data exchange command itself must be sent
+ asynchronously.
+- tm_send() is called to send data in the case of a p2p connection
+- check_presence() is an optional entry point that will be called regularly
+ by the core to check that an activated tag is still in the field. If this is
+ not implemented, the core will not be able to push tag_lost events to the user
+ space
+- event_received() is called to handle an event coming from the chip. Driver
+ can handle the event or return 1 to let HCI attempt standard processing.
+
+On the rx path, the driver is responsible to push incoming HCP frames to HCI
+using nfc_hci_recv_frame(). HCI will take care of re-aggregation and handling
+This must be done from a context that can sleep.
+
+PHY Management
+--------------
+
+The physical link (i2c, ...) management is defined by the following structure::
+
+ struct nfc_phy_ops {
+ int (*write)(void *dev_id, struct sk_buff *skb);
+ int (*enable)(void *dev_id);
+ void (*disable)(void *dev_id);
+ };
+
+enable():
+ turn the phy on (power on), make it ready to transfer data
+disable():
+ turn the phy off
+write():
+ Send a data frame to the chip. Note that to enable higher
+ layers such as an llc to store the frame for re-emission, this
+ function must not alter the skb. It must also not return a positive
+ result (return 0 for success, negative for failure).
+
+Data coming from the chip shall be sent directly to nfc_hci_recv_frame().
+
+LLC
+---
+
+Communication between the CPU and the chip often requires some link layer
+protocol. Those are isolated as modules managed by the HCI layer. There are
+currently two modules : nop (raw transfert) and shdlc.
+A new llc must implement the following functions::
+
+ struct nfc_llc_ops {
+ void *(*init) (struct nfc_hci_dev *hdev, xmit_to_drv_t xmit_to_drv,
+ rcv_to_hci_t rcv_to_hci, int tx_headroom,
+ int tx_tailroom, int *rx_headroom, int *rx_tailroom,
+ llc_failure_t llc_failure);
+ void (*deinit) (struct nfc_llc *llc);
+ int (*start) (struct nfc_llc *llc);
+ int (*stop) (struct nfc_llc *llc);
+ void (*rcv_from_drv) (struct nfc_llc *llc, struct sk_buff *skb);
+ int (*xmit_from_hci) (struct nfc_llc *llc, struct sk_buff *skb);
+ };
+
+init():
+ allocate and init your private storage
+deinit():
+ cleanup
+start():
+ establish the logical connection
+stop ():
+ terminate the logical connection
+rcv_from_drv():
+ handle data coming from the chip, going to HCI
+xmit_from_hci():
+ handle data sent by HCI, going to the chip
+
+The llc must be registered with nfc before it can be used. Do that by
+calling::
+
+ nfc_llc_register(const char *name, struct nfc_llc_ops *ops);
+
+Again, note that the llc does not handle the physical link. It is thus very
+easy to mix any physical link with any llc for a given chip driver.
+
+Included Drivers
+----------------
+
+An HCI based driver for an NXP PN544, connected through I2C bus, and using
+shdlc is included.
+
+Execution Contexts
+------------------
+
+The execution contexts are the following:
+- IRQ handler (IRQH):
+fast, cannot sleep. sends incoming frames to HCI where they are passed to
+the current llc. In case of shdlc, the frame is queued in shdlc rx queue.
+
+- SHDLC State Machine worker (SMW)
+
+ Only when llc_shdlc is used: handles shdlc rx & tx queues.
+
+ Dispatches HCI cmd responses.
+
+- HCI Tx Cmd worker (MSGTXWQ)
+
+ Serializes execution of HCI commands.
+
+ Completes execution in case of response timeout.
+
+- HCI Rx worker (MSGRXWQ)
+
+ Dispatches incoming HCI commands or events.
+
+- Syscall context from a userspace call (SYSCALL)
+
+ Any entrypoint in HCI called from NFC Core
+
+Workflow executing an HCI command (using shdlc)
+-----------------------------------------------
+
+Executing an HCI command can easily be performed synchronously using the
+following API::
+
+ int nfc_hci_send_cmd (struct nfc_hci_dev *hdev, u8 gate, u8 cmd,
+ const u8 *param, size_t param_len, struct sk_buff **skb)
+
+The API must be invoked from a context that can sleep. Most of the time, this
+will be the syscall context. skb will return the result that was received in
+the response.
+
+Internally, execution is asynchronous. So all this API does is to enqueue the
+HCI command, setup a local wait queue on stack, and wait_event() for completion.
+The wait is not interruptible because it is guaranteed that the command will
+complete after some short timeout anyway.
+
+MSGTXWQ context will then be scheduled and invoke nfc_hci_msg_tx_work().
+This function will dequeue the next pending command and send its HCP fragments
+to the lower layer which happens to be shdlc. It will then start a timer to be
+able to complete the command with a timeout error if no response arrive.
+
+SMW context gets scheduled and invokes nfc_shdlc_sm_work(). This function
+handles shdlc framing in and out. It uses the driver xmit to send frames and
+receives incoming frames in an skb queue filled from the driver IRQ handler.
+SHDLC I(nformation) frames payload are HCP fragments. They are aggregated to
+form complete HCI frames, which can be a response, command, or event.
+
+HCI Responses are dispatched immediately from this context to unblock
+waiting command execution. Response processing involves invoking the completion
+callback that was provided by nfc_hci_msg_tx_work() when it sent the command.
+The completion callback will then wake the syscall context.
+
+It is also possible to execute the command asynchronously using this API::
+
+ static int nfc_hci_execute_cmd_async(struct nfc_hci_dev *hdev, u8 pipe, u8 cmd,
+ const u8 *param, size_t param_len,
+ data_exchange_cb_t cb, void *cb_context)
+
+The workflow is the same, except that the API call returns immediately, and
+the callback will be called with the result from the SMW context.
+
+Workflow receiving an HCI event or command
+------------------------------------------
+
+HCI commands or events are not dispatched from SMW context. Instead, they are
+queued to HCI rx_queue and will be dispatched from HCI rx worker
+context (MSGRXWQ). This is done this way to allow a cmd or event handler
+to also execute other commands (for example, handling the
+NFC_HCI_EVT_TARGET_DISCOVERED event from PN544 requires to issue an
+ANY_GET_PARAMETER to the reader A gate to get information on the target
+that was discovered).
+
+Typically, such an event will be propagated to NFC Core from MSGRXWQ context.
+
+Error management
+----------------
+
+Errors that occur synchronously with the execution of an NFC Core request are
+simply returned as the execution result of the request. These are easy.
+
+Errors that occur asynchronously (e.g. in a background protocol handling thread)
+must be reported such that upper layers don't stay ignorant that something
+went wrong below and know that expected events will probably never happen.
+Handling of these errors is done as follows:
+
+- driver (pn544) fails to deliver an incoming frame: it stores the error such
+ that any subsequent call to the driver will result in this error. Then it
+ calls the standard nfc_shdlc_recv_frame() with a NULL argument to report the
+ problem above. shdlc stores a EREMOTEIO sticky status, which will trigger
+ SMW to report above in turn.
+
+- SMW is basically a background thread to handle incoming and outgoing shdlc
+ frames. This thread will also check the shdlc sticky status and report to HCI
+ when it discovers it is not able to run anymore because of an unrecoverable
+ error that happened within shdlc or below. If the problem occurs during shdlc
+ connection, the error is reported through the connect completion.
+
+- HCI: if an internal HCI error happens (frame is lost), or HCI is reported an
+ error from a lower layer, HCI will either complete the currently executing
+ command with that error, or notify NFC Core directly if no command is
+ executing.
+
+- NFC Core: when NFC Core is notified of an error from below and polling is
+ active, it will send a tag discovered event with an empty tag list to the user
+ space to let it know that the poll operation will never be able to detect a
+ tag. If polling is not active and the error was sticky, lower levels will
+ return it at next invocation.
diff --git a/Documentation/driver-api/nfc/nfc-pn544.rst b/Documentation/driver-api/nfc/nfc-pn544.rst
new file mode 100644
index 000000000000..6b2d8aae0c4e
--- /dev/null
+++ b/Documentation/driver-api/nfc/nfc-pn544.rst
@@ -0,0 +1,34 @@
+============================================================================
+Kernel driver for the NXP Semiconductors PN544 Near Field Communication chip
+============================================================================
+
+
+General
+-------
+
+The PN544 is an integrated transmission module for contactless
+communication. The driver goes under drives/nfc/ and is compiled as a
+module named "pn544".
+
+Host Interfaces: I2C, SPI and HSU, this driver supports currently only I2C.
+
+Protocols
+---------
+
+In the normal (HCI) mode and in the firmware update mode read and
+write functions behave a bit differently because the message formats
+or the protocols are different.
+
+In the normal (HCI) mode the protocol used is derived from the ETSI
+HCI specification. The firmware is updated using a specific protocol,
+which is different from HCI.
+
+HCI messages consist of an eight bit header and the message body. The
+header contains the message length. Maximum size for an HCI message is
+33. In HCI mode sent messages are tested for a correct
+checksum. Firmware update messages have the length in the second (MSB)
+and third (LSB) bytes of the message. The maximum FW message length is
+1024 bytes.
+
+For the ETSI HCI specification see
+http://www.etsi.org/WebSite/Technologies/ProtocolSpecification.aspx
diff --git a/Documentation/driver-api/ntb.rst b/Documentation/driver-api/ntb.rst
new file mode 100644
index 000000000000..074a423c853c
--- /dev/null
+++ b/Documentation/driver-api/ntb.rst
@@ -0,0 +1,236 @@
+===========
+NTB Drivers
+===========
+
+NTB (Non-Transparent Bridge) is a type of PCI-Express bridge chip that connects
+the separate memory systems of two or more computers to the same PCI-Express
+fabric. Existing NTB hardware supports a common feature set: doorbell
+registers and memory translation windows, as well as non common features like
+scratchpad and message registers. Scratchpad registers are read-and-writable
+registers that are accessible from either side of the device, so that peers can
+exchange a small amount of information at a fixed address. Message registers can
+be utilized for the same purpose. Additionally they are provided with with
+special status bits to make sure the information isn't rewritten by another
+peer. Doorbell registers provide a way for peers to send interrupt events.
+Memory windows allow translated read and write access to the peer memory.
+
+NTB Core Driver (ntb)
+=====================
+
+The NTB core driver defines an api wrapping the common feature set, and allows
+clients interested in NTB features to discover NTB the devices supported by
+hardware drivers. The term "client" is used here to mean an upper layer
+component making use of the NTB api. The term "driver," or "hardware driver,"
+is used here to mean a driver for a specific vendor and model of NTB hardware.
+
+NTB Client Drivers
+==================
+
+NTB client drivers should register with the NTB core driver. After
+registering, the client probe and remove functions will be called appropriately
+as ntb hardware, or hardware drivers, are inserted and removed. The
+registration uses the Linux Device framework, so it should feel familiar to
+anyone who has written a pci driver.
+
+NTB Typical client driver implementation
+----------------------------------------
+
+Primary purpose of NTB is to share some peace of memory between at least two
+systems. So the NTB device features like Scratchpad/Message registers are
+mainly used to perform the proper memory window initialization. Typically
+there are two types of memory window interfaces supported by the NTB API:
+inbound translation configured on the local ntb port and outbound translation
+configured by the peer, on the peer ntb port. The first type is
+depicted on the next figure::
+
+ Inbound translation:
+
+ Memory: Local NTB Port: Peer NTB Port: Peer MMIO:
+ ____________
+ | dma-mapped |-ntb_mw_set_trans(addr) |
+ | memory | _v____________ | ______________
+ | (addr) |<======| MW xlat addr |<====| MW base addr |<== memory-mapped IO
+ |------------| |--------------| | |--------------|
+
+So typical scenario of the first type memory window initialization looks:
+1) allocate a memory region, 2) put translated address to NTB config,
+3) somehow notify a peer device of performed initialization, 4) peer device
+maps corresponding outbound memory window so to have access to the shared
+memory region.
+
+The second type of interface, that implies the shared windows being
+initialized by a peer device, is depicted on the figure::
+
+ Outbound translation:
+
+ Memory: Local NTB Port: Peer NTB Port: Peer MMIO:
+ ____________ ______________
+ | dma-mapped | | | MW base addr |<== memory-mapped IO
+ | memory | | |--------------|
+ | (addr) |<===================| MW xlat addr |<-ntb_peer_mw_set_trans(addr)
+ |------------| | |--------------|
+
+Typical scenario of the second type interface initialization would be:
+1) allocate a memory region, 2) somehow deliver a translated address to a peer
+device, 3) peer puts the translated address to NTB config, 4) peer device maps
+outbound memory window so to have access to the shared memory region.
+
+As one can see the described scenarios can be combined in one portable
+algorithm.
+
+ Local device:
+ 1) Allocate memory for a shared window
+ 2) Initialize memory window by translated address of the allocated region
+ (it may fail if local memory window initialization is unsupported)
+ 3) Send the translated address and memory window index to a peer device
+
+ Peer device:
+ 1) Initialize memory window with retrieved address of the allocated
+ by another device memory region (it may fail if peer memory window
+ initialization is unsupported)
+ 2) Map outbound memory window
+
+In accordance with this scenario, the NTB Memory Window API can be used as
+follows:
+
+ Local device:
+ 1) ntb_mw_count(pidx) - retrieve number of memory ranges, which can
+ be allocated for memory windows between local device and peer device
+ of port with specified index.
+ 2) ntb_get_align(pidx, midx) - retrieve parameters restricting the
+ shared memory region alignment and size. Then memory can be properly
+ allocated.
+ 3) Allocate physically contiguous memory region in compliance with
+ restrictions retrieved in 2).
+ 4) ntb_mw_set_trans(pidx, midx) - try to set translation address of
+ the memory window with specified index for the defined peer device
+ (it may fail if local translated address setting is not supported)
+ 5) Send translated base address (usually together with memory window
+ number) to the peer device using, for instance, scratchpad or message
+ registers.
+
+ Peer device:
+ 1) ntb_peer_mw_set_trans(pidx, midx) - try to set received from other
+ device (related to pidx) translated address for specified memory
+ window. It may fail if retrieved address, for instance, exceeds
+ maximum possible address or isn't properly aligned.
+ 2) ntb_peer_mw_get_addr(widx) - retrieve MMIO address to map the memory
+ window so to have an access to the shared memory.
+
+Also it is worth to note, that method ntb_mw_count(pidx) should return the
+same value as ntb_peer_mw_count() on the peer with port index - pidx.
+
+NTB Transport Client (ntb\_transport) and NTB Netdev (ntb\_netdev)
+------------------------------------------------------------------
+
+The primary client for NTB is the Transport client, used in tandem with NTB
+Netdev. These drivers function together to create a logical link to the peer,
+across the ntb, to exchange packets of network data. The Transport client
+establishes a logical link to the peer, and creates queue pairs to exchange
+messages and data. The NTB Netdev then creates an ethernet device using a
+Transport queue pair. Network data is copied between socket buffers and the
+Transport queue pair buffer. The Transport client may be used for other things
+besides Netdev, however no other applications have yet been written.
+
+NTB Ping Pong Test Client (ntb\_pingpong)
+-----------------------------------------
+
+The Ping Pong test client serves as a demonstration to exercise the doorbell
+and scratchpad registers of NTB hardware, and as an example simple NTB client.
+Ping Pong enables the link when started, waits for the NTB link to come up, and
+then proceeds to read and write the doorbell scratchpad registers of the NTB.
+The peers interrupt each other using a bit mask of doorbell bits, which is
+shifted by one in each round, to test the behavior of multiple doorbell bits
+and interrupt vectors. The Ping Pong driver also reads the first local
+scratchpad, and writes the value plus one to the first peer scratchpad, each
+round before writing the peer doorbell register.
+
+Module Parameters:
+
+* unsafe - Some hardware has known issues with scratchpad and doorbell
+ registers. By default, Ping Pong will not attempt to exercise such
+ hardware. You may override this behavior at your own risk by setting
+ unsafe=1.
+* delay\_ms - Specify the delay between receiving a doorbell
+ interrupt event and setting the peer doorbell register for the next
+ round.
+* init\_db - Specify the doorbell bits to start new series of rounds. A new
+ series begins once all the doorbell bits have been shifted out of
+ range.
+* dyndbg - It is suggested to specify dyndbg=+p when loading this module, and
+ then to observe debugging output on the console.
+
+NTB Tool Test Client (ntb\_tool)
+--------------------------------
+
+The Tool test client serves for debugging, primarily, ntb hardware and drivers.
+The Tool provides access through debugfs for reading, setting, and clearing the
+NTB doorbell, and reading and writing scratchpads.
+
+The Tool does not currently have any module parameters.
+
+Debugfs Files:
+
+* *debugfs*/ntb\_tool/*hw*/
+ A directory in debugfs will be created for each
+ NTB device probed by the tool. This directory is shortened to *hw*
+ below.
+* *hw*/db
+ This file is used to read, set, and clear the local doorbell. Not
+ all operations may be supported by all hardware. To read the doorbell,
+ read the file. To set the doorbell, write `s` followed by the bits to
+ set (eg: `echo 's 0x0101' > db`). To clear the doorbell, write `c`
+ followed by the bits to clear.
+* *hw*/mask
+ This file is used to read, set, and clear the local doorbell mask.
+ See *db* for details.
+* *hw*/peer\_db
+ This file is used to read, set, and clear the peer doorbell.
+ See *db* for details.
+* *hw*/peer\_mask
+ This file is used to read, set, and clear the peer doorbell
+ mask. See *db* for details.
+* *hw*/spad
+ This file is used to read and write local scratchpads. To read
+ the values of all scratchpads, read the file. To write values, write a
+ series of pairs of scratchpad number and value
+ (eg: `echo '4 0x123 7 0xabc' > spad`
+ # to set scratchpads `4` and `7` to `0x123` and `0xabc`, respectively).
+* *hw*/peer\_spad
+ This file is used to read and write peer scratchpads. See
+ *spad* for details.
+
+NTB Hardware Drivers
+====================
+
+NTB hardware drivers should register devices with the NTB core driver. After
+registering, clients probe and remove functions will be called.
+
+NTB Intel Hardware Driver (ntb\_hw\_intel)
+------------------------------------------
+
+The Intel hardware driver supports NTB on Xeon and Atom CPUs.
+
+Module Parameters:
+
+* b2b\_mw\_idx
+ If the peer ntb is to be accessed via a memory window, then use
+ this memory window to access the peer ntb. A value of zero or positive
+ starts from the first mw idx, and a negative value starts from the last
+ mw idx. Both sides MUST set the same value here! The default value is
+ `-1`.
+* b2b\_mw\_share
+ If the peer ntb is to be accessed via a memory window, and if
+ the memory window is large enough, still allow the client to use the
+ second half of the memory window for address translation to the peer.
+* xeon\_b2b\_usd\_bar2\_addr64
+ If using B2B topology on Xeon hardware, use
+ this 64 bit address on the bus between the NTB devices for the window
+ at BAR2, on the upstream side of the link.
+* xeon\_b2b\_usd\_bar4\_addr64 - See *xeon\_b2b\_bar2\_addr64*.
+* xeon\_b2b\_usd\_bar4\_addr32 - See *xeon\_b2b\_bar2\_addr64*.
+* xeon\_b2b\_usd\_bar5\_addr32 - See *xeon\_b2b\_bar2\_addr64*.
+* xeon\_b2b\_dsd\_bar2\_addr64 - See *xeon\_b2b\_bar2\_addr64*.
+* xeon\_b2b\_dsd\_bar4\_addr64 - See *xeon\_b2b\_bar2\_addr64*.
+* xeon\_b2b\_dsd\_bar4\_addr32 - See *xeon\_b2b\_bar2\_addr64*.
+* xeon\_b2b\_dsd\_bar5\_addr32 - See *xeon\_b2b\_bar2\_addr64*.
diff --git a/Documentation/driver-api/nvdimm/btt.rst b/Documentation/driver-api/nvdimm/btt.rst
new file mode 100644
index 000000000000..107395c042ae
--- /dev/null
+++ b/Documentation/driver-api/nvdimm/btt.rst
@@ -0,0 +1,285 @@
+=============================
+BTT - Block Translation Table
+=============================
+
+
+1. Introduction
+===============
+
+Persistent memory based storage is able to perform IO at byte (or more
+accurately, cache line) granularity. However, we often want to expose such
+storage as traditional block devices. The block drivers for persistent memory
+will do exactly this. However, they do not provide any atomicity guarantees.
+Traditional SSDs typically provide protection against torn sectors in hardware,
+using stored energy in capacitors to complete in-flight block writes, or perhaps
+in firmware. We don't have this luxury with persistent memory - if a write is in
+progress, and we experience a power failure, the block will contain a mix of old
+and new data. Applications may not be prepared to handle such a scenario.
+
+The Block Translation Table (BTT) provides atomic sector update semantics for
+persistent memory devices, so that applications that rely on sector writes not
+being torn can continue to do so. The BTT manifests itself as a stacked block
+device, and reserves a portion of the underlying storage for its metadata. At
+the heart of it, is an indirection table that re-maps all the blocks on the
+volume. It can be thought of as an extremely simple file system that only
+provides atomic sector updates.
+
+
+2. Static Layout
+================
+
+The underlying storage on which a BTT can be laid out is not limited in any way.
+The BTT, however, splits the available space into chunks of up to 512 GiB,
+called "Arenas".
+
+Each arena follows the same layout for its metadata, and all references in an
+arena are internal to it (with the exception of one field that points to the
+next arena). The following depicts the "On-disk" metadata layout::
+
+
+ Backing Store +-------> Arena
+ +---------------+ | +------------------+
+ | | | | Arena info block |
+ | Arena 0 +---+ | 4K |
+ | 512G | +------------------+
+ | | | |
+ +---------------+ | |
+ | | | |
+ | Arena 1 | | Data Blocks |
+ | 512G | | |
+ | | | |
+ +---------------+ | |
+ | . | | |
+ | . | | |
+ | . | | |
+ | | | |
+ | | | |
+ +---------------+ +------------------+
+ | |
+ | BTT Map |
+ | |
+ | |
+ +------------------+
+ | |
+ | BTT Flog |
+ | |
+ +------------------+
+ | Info block copy |
+ | 4K |
+ +------------------+
+
+
+3. Theory of Operation
+======================
+
+
+a. The BTT Map
+--------------
+
+The map is a simple lookup/indirection table that maps an LBA to an internal
+block. Each map entry is 32 bits. The two most significant bits are special
+flags, and the remaining form the internal block number.
+
+======== =============================================================
+Bit Description
+======== =============================================================
+31 - 30 Error and Zero flags - Used in the following way::
+
+ == == ====================================================
+ 31 30 Description
+ == == ====================================================
+ 0 0 Initial state. Reads return zeroes; Premap = Postmap
+ 0 1 Zero state: Reads return zeroes
+ 1 0 Error state: Reads fail; Writes clear 'E' bit
+ 1 1 Normal Block – has valid postmap
+ == == ====================================================
+
+29 - 0 Mappings to internal 'postmap' blocks
+======== =============================================================
+
+
+Some of the terminology that will be subsequently used:
+
+============ ================================================================
+External LBA LBA as made visible to upper layers.
+ABA Arena Block Address - Block offset/number within an arena
+Premap ABA The block offset into an arena, which was decided upon by range
+ checking the External LBA
+Postmap ABA The block number in the "Data Blocks" area obtained after
+ indirection from the map
+nfree The number of free blocks that are maintained at any given time.
+ This is the number of concurrent writes that can happen to the
+ arena.
+============ ================================================================
+
+
+For example, after adding a BTT, we surface a disk of 1024G. We get a read for
+the external LBA at 768G. This falls into the second arena, and of the 512G
+worth of blocks that this arena contributes, this block is at 256G. Thus, the
+premap ABA is 256G. We now refer to the map, and find out the mapping for block
+'X' (256G) points to block 'Y', say '64'. Thus the postmap ABA is 64.
+
+
+b. The BTT Flog
+---------------
+
+The BTT provides sector atomicity by making every write an "allocating write",
+i.e. Every write goes to a "free" block. A running list of free blocks is
+maintained in the form of the BTT flog. 'Flog' is a combination of the words
+"free list" and "log". The flog contains 'nfree' entries, and an entry contains:
+
+======== =====================================================================
+lba The premap ABA that is being written to
+old_map The old postmap ABA - after 'this' write completes, this will be a
+ free block.
+new_map The new postmap ABA. The map will up updated to reflect this
+ lba->postmap_aba mapping, but we log it here in case we have to
+ recover.
+seq Sequence number to mark which of the 2 sections of this flog entry is
+ valid/newest. It cycles between 01->10->11->01 (binary) under normal
+ operation, with 00 indicating an uninitialized state.
+lba' alternate lba entry
+old_map' alternate old postmap entry
+new_map' alternate new postmap entry
+seq' alternate sequence number.
+======== =====================================================================
+
+Each of the above fields is 32-bit, making one entry 32 bytes. Entries are also
+padded to 64 bytes to avoid cache line sharing or aliasing. Flog updates are
+done such that for any entry being written, it:
+a. overwrites the 'old' section in the entry based on sequence numbers
+b. writes the 'new' section such that the sequence number is written last.
+
+
+c. The concept of lanes
+-----------------------
+
+While 'nfree' describes the number of concurrent IOs an arena can process
+concurrently, 'nlanes' is the number of IOs the BTT device as a whole can
+process::
+
+ nlanes = min(nfree, num_cpus)
+
+A lane number is obtained at the start of any IO, and is used for indexing into
+all the on-disk and in-memory data structures for the duration of the IO. If
+there are more CPUs than the max number of available lanes, than lanes are
+protected by spinlocks.
+
+
+d. In-memory data structure: Read Tracking Table (RTT)
+------------------------------------------------------
+
+Consider a case where we have two threads, one doing reads and the other,
+writes. We can hit a condition where the writer thread grabs a free block to do
+a new IO, but the (slow) reader thread is still reading from it. In other words,
+the reader consulted a map entry, and started reading the corresponding block. A
+writer started writing to the same external LBA, and finished the write updating
+the map for that external LBA to point to its new postmap ABA. At this point the
+internal, postmap block that the reader is (still) reading has been inserted
+into the list of free blocks. If another write comes in for the same LBA, it can
+grab this free block, and start writing to it, causing the reader to read
+incorrect data. To prevent this, we introduce the RTT.
+
+The RTT is a simple, per arena table with 'nfree' entries. Every reader inserts
+into rtt[lane_number], the postmap ABA it is reading, and clears it after the
+read is complete. Every writer thread, after grabbing a free block, checks the
+RTT for its presence. If the postmap free block is in the RTT, it waits till the
+reader clears the RTT entry, and only then starts writing to it.
+
+
+e. In-memory data structure: map locks
+--------------------------------------
+
+Consider a case where two writer threads are writing to the same LBA. There can
+be a race in the following sequence of steps::
+
+ free[lane] = map[premap_aba]
+ map[premap_aba] = postmap_aba
+
+Both threads can update their respective free[lane] with the same old, freed
+postmap_aba. This has made the layout inconsistent by losing a free entry, and
+at the same time, duplicating another free entry for two lanes.
+
+To solve this, we could have a single map lock (per arena) that has to be taken
+before performing the above sequence, but we feel that could be too contentious.
+Instead we use an array of (nfree) map_locks that is indexed by
+(premap_aba modulo nfree).
+
+
+f. Reconstruction from the Flog
+-------------------------------
+
+On startup, we analyze the BTT flog to create our list of free blocks. We walk
+through all the entries, and for each lane, of the set of two possible
+'sections', we always look at the most recent one only (based on the sequence
+number). The reconstruction rules/steps are simple:
+
+- Read map[log_entry.lba].
+- If log_entry.new matches the map entry, then log_entry.old is free.
+- If log_entry.new does not match the map entry, then log_entry.new is free.
+ (This case can only be caused by power-fails/unsafe shutdowns)
+
+
+g. Summarizing - Read and Write flows
+-------------------------------------
+
+Read:
+
+1. Convert external LBA to arena number + pre-map ABA
+2. Get a lane (and take lane_lock)
+3. Read map to get the entry for this pre-map ABA
+4. Enter post-map ABA into RTT[lane]
+5. If TRIM flag set in map, return zeroes, and end IO (go to step 8)
+6. If ERROR flag set in map, end IO with EIO (go to step 8)
+7. Read data from this block
+8. Remove post-map ABA entry from RTT[lane]
+9. Release lane (and lane_lock)
+
+Write:
+
+1. Convert external LBA to Arena number + pre-map ABA
+2. Get a lane (and take lane_lock)
+3. Use lane to index into in-memory free list and obtain a new block, next flog
+ index, next sequence number
+4. Scan the RTT to check if free block is present, and spin/wait if it is.
+5. Write data to this free block
+6. Read map to get the existing post-map ABA entry for this pre-map ABA
+7. Write flog entry: [premap_aba / old postmap_aba / new postmap_aba / seq_num]
+8. Write new post-map ABA into map.
+9. Write old post-map entry into the free list
+10. Calculate next sequence number and write into the free list entry
+11. Release lane (and lane_lock)
+
+
+4. Error Handling
+=================
+
+An arena would be in an error state if any of the metadata is corrupted
+irrecoverably, either due to a bug or a media error. The following conditions
+indicate an error:
+
+- Info block checksum does not match (and recovering from the copy also fails)
+- All internal available blocks are not uniquely and entirely addressed by the
+ sum of mapped blocks and free blocks (from the BTT flog).
+- Rebuilding free list from the flog reveals missing/duplicate/impossible
+ entries
+- A map entry is out of bounds
+
+If any of these error conditions are encountered, the arena is put into a read
+only state using a flag in the info block.
+
+
+5. Usage
+========
+
+The BTT can be set up on any disk (namespace) exposed by the libnvdimm subsystem
+(pmem, or blk mode). The easiest way to set up such a namespace is using the
+'ndctl' utility [1]:
+
+For example, the ndctl command line to setup a btt with a 4k sector size is::
+
+ ndctl create-namespace -f -e namespace0.0 -m sector -l 4k
+
+See ndctl create-namespace --help for more options.
+
+[1]: https://github.com/pmem/ndctl
diff --git a/Documentation/driver-api/nvdimm/index.rst b/Documentation/driver-api/nvdimm/index.rst
new file mode 100644
index 000000000000..a4f8f98aeb94
--- /dev/null
+++ b/Documentation/driver-api/nvdimm/index.rst
@@ -0,0 +1,12 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+===================================
+Non-Volatile Memory Device (NVDIMM)
+===================================
+
+.. toctree::
+ :maxdepth: 1
+
+ nvdimm
+ btt
+ security
diff --git a/Documentation/driver-api/nvdimm/nvdimm.rst b/Documentation/driver-api/nvdimm/nvdimm.rst
new file mode 100644
index 000000000000..08f855cbb4e6
--- /dev/null
+++ b/Documentation/driver-api/nvdimm/nvdimm.rst
@@ -0,0 +1,887 @@
+===============================
+LIBNVDIMM: Non-Volatile Devices
+===============================
+
+libnvdimm - kernel / libndctl - userspace helper library
+
+linux-nvdimm@lists.01.org
+
+Version 13
+
+.. contents:
+
+ Glossary
+ Overview
+ Supporting Documents
+ Git Trees
+ LIBNVDIMM PMEM and BLK
+ Why BLK?
+ PMEM vs BLK
+ BLK-REGIONs, PMEM-REGIONs, Atomic Sectors, and DAX
+ Example NVDIMM Platform
+ LIBNVDIMM Kernel Device Model and LIBNDCTL Userspace API
+ LIBNDCTL: Context
+ libndctl: instantiate a new library context example
+ LIBNVDIMM/LIBNDCTL: Bus
+ libnvdimm: control class device in /sys/class
+ libnvdimm: bus
+ libndctl: bus enumeration example
+ LIBNVDIMM/LIBNDCTL: DIMM (NMEM)
+ libnvdimm: DIMM (NMEM)
+ libndctl: DIMM enumeration example
+ LIBNVDIMM/LIBNDCTL: Region
+ libnvdimm: region
+ libndctl: region enumeration example
+ Why Not Encode the Region Type into the Region Name?
+ How Do I Determine the Major Type of a Region?
+ LIBNVDIMM/LIBNDCTL: Namespace
+ libnvdimm: namespace
+ libndctl: namespace enumeration example
+ libndctl: namespace creation example
+ Why the Term "namespace"?
+ LIBNVDIMM/LIBNDCTL: Block Translation Table "btt"
+ libnvdimm: btt layout
+ libndctl: btt creation example
+ Summary LIBNDCTL Diagram
+
+
+Glossary
+========
+
+PMEM:
+ A system-physical-address range where writes are persistent. A
+ block device composed of PMEM is capable of DAX. A PMEM address range
+ may span an interleave of several DIMMs.
+
+BLK:
+ A set of one or more programmable memory mapped apertures provided
+ by a DIMM to access its media. This indirection precludes the
+ performance benefit of interleaving, but enables DIMM-bounded failure
+ modes.
+
+DPA:
+ DIMM Physical Address, is a DIMM-relative offset. With one DIMM in
+ the system there would be a 1:1 system-physical-address:DPA association.
+ Once more DIMMs are added a memory controller interleave must be
+ decoded to determine the DPA associated with a given
+ system-physical-address. BLK capacity always has a 1:1 relationship
+ with a single-DIMM's DPA range.
+
+DAX:
+ File system extensions to bypass the page cache and block layer to
+ mmap persistent memory, from a PMEM block device, directly into a
+ process address space.
+
+DSM:
+ Device Specific Method: ACPI method to to control specific
+ device - in this case the firmware.
+
+DCR:
+ NVDIMM Control Region Structure defined in ACPI 6 Section 5.2.25.5.
+ It defines a vendor-id, device-id, and interface format for a given DIMM.
+
+BTT:
+ Block Translation Table: Persistent memory is byte addressable.
+ Existing software may have an expectation that the power-fail-atomicity
+ of writes is at least one sector, 512 bytes. The BTT is an indirection
+ table with atomic update semantics to front a PMEM/BLK block device
+ driver and present arbitrary atomic sector sizes.
+
+LABEL:
+ Metadata stored on a DIMM device that partitions and identifies
+ (persistently names) storage between PMEM and BLK. It also partitions
+ BLK storage to host BTTs with different parameters per BLK-partition.
+ Note that traditional partition tables, GPT/MBR, are layered on top of a
+ BLK or PMEM device.
+
+
+Overview
+========
+
+The LIBNVDIMM subsystem provides support for three types of NVDIMMs, namely,
+PMEM, BLK, and NVDIMM devices that can simultaneously support both PMEM
+and BLK mode access. These three modes of operation are described by
+the "NVDIMM Firmware Interface Table" (NFIT) in ACPI 6. While the LIBNVDIMM
+implementation is generic and supports pre-NFIT platforms, it was guided
+by the superset of capabilities need to support this ACPI 6 definition
+for NVDIMM resources. The bulk of the kernel implementation is in place
+to handle the case where DPA accessible via PMEM is aliased with DPA
+accessible via BLK. When that occurs a LABEL is needed to reserve DPA
+for exclusive access via one mode a time.
+
+Supporting Documents
+--------------------
+
+ACPI 6:
+ http://www.uefi.org/sites/default/files/resources/ACPI_6.0.pdf
+NVDIMM Namespace:
+ http://pmem.io/documents/NVDIMM_Namespace_Spec.pdf
+DSM Interface Example:
+ http://pmem.io/documents/NVDIMM_DSM_Interface_Example.pdf
+Driver Writer's Guide:
+ http://pmem.io/documents/NVDIMM_Driver_Writers_Guide.pdf
+
+Git Trees
+---------
+
+LIBNVDIMM:
+ https://git.kernel.org/cgit/linux/kernel/git/djbw/nvdimm.git
+LIBNDCTL:
+ https://github.com/pmem/ndctl.git
+PMEM:
+ https://github.com/01org/prd
+
+
+LIBNVDIMM PMEM and BLK
+======================
+
+Prior to the arrival of the NFIT, non-volatile memory was described to a
+system in various ad-hoc ways. Usually only the bare minimum was
+provided, namely, a single system-physical-address range where writes
+are expected to be durable after a system power loss. Now, the NFIT
+specification standardizes not only the description of PMEM, but also
+BLK and platform message-passing entry points for control and
+configuration.
+
+For each NVDIMM access method (PMEM, BLK), LIBNVDIMM provides a block
+device driver:
+
+ 1. PMEM (nd_pmem.ko): Drives a system-physical-address range. This
+ range is contiguous in system memory and may be interleaved (hardware
+ memory controller striped) across multiple DIMMs. When interleaved the
+ platform may optionally provide details of which DIMMs are participating
+ in the interleave.
+
+ Note that while LIBNVDIMM describes system-physical-address ranges that may
+ alias with BLK access as ND_NAMESPACE_PMEM ranges and those without
+ alias as ND_NAMESPACE_IO ranges, to the nd_pmem driver there is no
+ distinction. The different device-types are an implementation detail
+ that userspace can exploit to implement policies like "only interface
+ with address ranges from certain DIMMs". It is worth noting that when
+ aliasing is present and a DIMM lacks a label, then no block device can
+ be created by default as userspace needs to do at least one allocation
+ of DPA to the PMEM range. In contrast ND_NAMESPACE_IO ranges, once
+ registered, can be immediately attached to nd_pmem.
+
+ 2. BLK (nd_blk.ko): This driver performs I/O using a set of platform
+ defined apertures. A set of apertures will access just one DIMM.
+ Multiple windows (apertures) allow multiple concurrent accesses, much like
+ tagged-command-queuing, and would likely be used by different threads or
+ different CPUs.
+
+ The NFIT specification defines a standard format for a BLK-aperture, but
+ the spec also allows for vendor specific layouts, and non-NFIT BLK
+ implementations may have other designs for BLK I/O. For this reason
+ "nd_blk" calls back into platform-specific code to perform the I/O.
+
+ One such implementation is defined in the "Driver Writer's Guide" and "DSM
+ Interface Example".
+
+
+Why BLK?
+========
+
+While PMEM provides direct byte-addressable CPU-load/store access to
+NVDIMM storage, it does not provide the best system RAS (recovery,
+availability, and serviceability) model. An access to a corrupted
+system-physical-address address causes a CPU exception while an access
+to a corrupted address through an BLK-aperture causes that block window
+to raise an error status in a register. The latter is more aligned with
+the standard error model that host-bus-adapter attached disks present.
+
+Also, if an administrator ever wants to replace a memory it is easier to
+service a system at DIMM module boundaries. Compare this to PMEM where
+data could be interleaved in an opaque hardware specific manner across
+several DIMMs.
+
+PMEM vs BLK
+-----------
+
+BLK-apertures solve these RAS problems, but their presence is also the
+major contributing factor to the complexity of the ND subsystem. They
+complicate the implementation because PMEM and BLK alias in DPA space.
+Any given DIMM's DPA-range may contribute to one or more
+system-physical-address sets of interleaved DIMMs, *and* may also be
+accessed in its entirety through its BLK-aperture. Accessing a DPA
+through a system-physical-address while simultaneously accessing the
+same DPA through a BLK-aperture has undefined results. For this reason,
+DIMMs with this dual interface configuration include a DSM function to
+store/retrieve a LABEL. The LABEL effectively partitions the DPA-space
+into exclusive system-physical-address and BLK-aperture accessible
+regions. For simplicity a DIMM is allowed a PMEM "region" per each
+interleave set in which it is a member. The remaining DPA space can be
+carved into an arbitrary number of BLK devices with discontiguous
+extents.
+
+BLK-REGIONs, PMEM-REGIONs, Atomic Sectors, and DAX
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+One of the few
+reasons to allow multiple BLK namespaces per REGION is so that each
+BLK-namespace can be configured with a BTT with unique atomic sector
+sizes. While a PMEM device can host a BTT the LABEL specification does
+not provide for a sector size to be specified for a PMEM namespace.
+
+This is due to the expectation that the primary usage model for PMEM is
+via DAX, and the BTT is incompatible with DAX. However, for the cases
+where an application or filesystem still needs atomic sector update
+guarantees it can register a BTT on a PMEM device or partition. See
+LIBNVDIMM/NDCTL: Block Translation Table "btt"
+
+
+Example NVDIMM Platform
+=======================
+
+For the remainder of this document the following diagram will be
+referenced for any example sysfs layouts::
+
+
+ (a) (b) DIMM BLK-REGION
+ +-------------------+--------+--------+--------+
+ +------+ | pm0.0 | blk2.0 | pm1.0 | blk2.1 | 0 region2
+ | imc0 +--+- - - region0- - - +--------+ +--------+
+ +--+---+ | pm0.0 | blk3.0 | pm1.0 | blk3.1 | 1 region3
+ | +-------------------+--------v v--------+
+ +--+---+ | |
+ | cpu0 | region1
+ +--+---+ | |
+ | +----------------------------^ ^--------+
+ +--+---+ | blk4.0 | pm1.0 | blk4.0 | 2 region4
+ | imc1 +--+----------------------------| +--------+
+ +------+ | blk5.0 | pm1.0 | blk5.0 | 3 region5
+ +----------------------------+--------+--------+
+
+In this platform we have four DIMMs and two memory controllers in one
+socket. Each unique interface (BLK or PMEM) to DPA space is identified
+by a region device with a dynamically assigned id (REGION0 - REGION5).
+
+ 1. The first portion of DIMM0 and DIMM1 are interleaved as REGION0. A
+ single PMEM namespace is created in the REGION0-SPA-range that spans most
+ of DIMM0 and DIMM1 with a user-specified name of "pm0.0". Some of that
+ interleaved system-physical-address range is reclaimed as BLK-aperture
+ accessed space starting at DPA-offset (a) into each DIMM. In that
+ reclaimed space we create two BLK-aperture "namespaces" from REGION2 and
+ REGION3 where "blk2.0" and "blk3.0" are just human readable names that
+ could be set to any user-desired name in the LABEL.
+
+ 2. In the last portion of DIMM0 and DIMM1 we have an interleaved
+ system-physical-address range, REGION1, that spans those two DIMMs as
+ well as DIMM2 and DIMM3. Some of REGION1 is allocated to a PMEM namespace
+ named "pm1.0", the rest is reclaimed in 4 BLK-aperture namespaces (for
+ each DIMM in the interleave set), "blk2.1", "blk3.1", "blk4.0", and
+ "blk5.0".
+
+ 3. The portion of DIMM2 and DIMM3 that do not participate in the REGION1
+ interleaved system-physical-address range (i.e. the DPA address past
+ offset (b) are also included in the "blk4.0" and "blk5.0" namespaces.
+ Note, that this example shows that BLK-aperture namespaces don't need to
+ be contiguous in DPA-space.
+
+ This bus is provided by the kernel under the device
+ /sys/devices/platform/nfit_test.0 when CONFIG_NFIT_TEST is enabled and
+ the nfit_test.ko module is loaded. This not only test LIBNVDIMM but the
+ acpi_nfit.ko driver as well.
+
+
+LIBNVDIMM Kernel Device Model and LIBNDCTL Userspace API
+========================================================
+
+What follows is a description of the LIBNVDIMM sysfs layout and a
+corresponding object hierarchy diagram as viewed through the LIBNDCTL
+API. The example sysfs paths and diagrams are relative to the Example
+NVDIMM Platform which is also the LIBNVDIMM bus used in the LIBNDCTL unit
+test.
+
+LIBNDCTL: Context
+-----------------
+
+Every API call in the LIBNDCTL library requires a context that holds the
+logging parameters and other library instance state. The library is
+based on the libabc template:
+
+ https://git.kernel.org/cgit/linux/kernel/git/kay/libabc.git
+
+LIBNDCTL: instantiate a new library context example
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+::
+
+ struct ndctl_ctx *ctx;
+
+ if (ndctl_new(&ctx) == 0)
+ return ctx;
+ else
+ return NULL;
+
+LIBNVDIMM/LIBNDCTL: Bus
+-----------------------
+
+A bus has a 1:1 relationship with an NFIT. The current expectation for
+ACPI based systems is that there is only ever one platform-global NFIT.
+That said, it is trivial to register multiple NFITs, the specification
+does not preclude it. The infrastructure supports multiple busses and
+we use this capability to test multiple NFIT configurations in the unit
+test.
+
+LIBNVDIMM: control class device in /sys/class
+---------------------------------------------
+
+This character device accepts DSM messages to be passed to DIMM
+identified by its NFIT handle::
+
+ /sys/class/nd/ndctl0
+ |-- dev
+ |-- device -> ../../../ndbus0
+ |-- subsystem -> ../../../../../../../class/nd
+
+
+
+LIBNVDIMM: bus
+--------------
+
+::
+
+ struct nvdimm_bus *nvdimm_bus_register(struct device *parent,
+ struct nvdimm_bus_descriptor *nfit_desc);
+
+::
+
+ /sys/devices/platform/nfit_test.0/ndbus0
+ |-- commands
+ |-- nd
+ |-- nfit
+ |-- nmem0
+ |-- nmem1
+ |-- nmem2
+ |-- nmem3
+ |-- power
+ |-- provider
+ |-- region0
+ |-- region1
+ |-- region2
+ |-- region3
+ |-- region4
+ |-- region5
+ |-- uevent
+ `-- wait_probe
+
+LIBNDCTL: bus enumeration example
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Find the bus handle that describes the bus from Example NVDIMM Platform::
+
+ static struct ndctl_bus *get_bus_by_provider(struct ndctl_ctx *ctx,
+ const char *provider)
+ {
+ struct ndctl_bus *bus;
+
+ ndctl_bus_foreach(ctx, bus)
+ if (strcmp(provider, ndctl_bus_get_provider(bus)) == 0)
+ return bus;
+
+ return NULL;
+ }
+
+ bus = get_bus_by_provider(ctx, "nfit_test.0");
+
+
+LIBNVDIMM/LIBNDCTL: DIMM (NMEM)
+-------------------------------
+
+The DIMM device provides a character device for sending commands to
+hardware, and it is a container for LABELs. If the DIMM is defined by
+NFIT then an optional 'nfit' attribute sub-directory is available to add
+NFIT-specifics.
+
+Note that the kernel device name for "DIMMs" is "nmemX". The NFIT
+describes these devices via "Memory Device to System Physical Address
+Range Mapping Structure", and there is no requirement that they actually
+be physical DIMMs, so we use a more generic name.
+
+LIBNVDIMM: DIMM (NMEM)
+^^^^^^^^^^^^^^^^^^^^^^
+
+::
+
+ struct nvdimm *nvdimm_create(struct nvdimm_bus *nvdimm_bus, void *provider_data,
+ const struct attribute_group **groups, unsigned long flags,
+ unsigned long *dsm_mask);
+
+::
+
+ /sys/devices/platform/nfit_test.0/ndbus0
+ |-- nmem0
+ | |-- available_slots
+ | |-- commands
+ | |-- dev
+ | |-- devtype
+ | |-- driver -> ../../../../../bus/nd/drivers/nvdimm
+ | |-- modalias
+ | |-- nfit
+ | | |-- device
+ | | |-- format
+ | | |-- handle
+ | | |-- phys_id
+ | | |-- rev_id
+ | | |-- serial
+ | | `-- vendor
+ | |-- state
+ | |-- subsystem -> ../../../../../bus/nd
+ | `-- uevent
+ |-- nmem1
+ [..]
+
+
+LIBNDCTL: DIMM enumeration example
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Note, in this example we are assuming NFIT-defined DIMMs which are
+identified by an "nfit_handle" a 32-bit value where:
+
+ - Bit 3:0 DIMM number within the memory channel
+ - Bit 7:4 memory channel number
+ - Bit 11:8 memory controller ID
+ - Bit 15:12 socket ID (within scope of a Node controller if node
+ controller is present)
+ - Bit 27:16 Node Controller ID
+ - Bit 31:28 Reserved
+
+::
+
+ static struct ndctl_dimm *get_dimm_by_handle(struct ndctl_bus *bus,
+ unsigned int handle)
+ {
+ struct ndctl_dimm *dimm;
+
+ ndctl_dimm_foreach(bus, dimm)
+ if (ndctl_dimm_get_handle(dimm) == handle)
+ return dimm;
+
+ return NULL;
+ }
+
+ #define DIMM_HANDLE(n, s, i, c, d) \
+ (((n & 0xfff) << 16) | ((s & 0xf) << 12) | ((i & 0xf) << 8) \
+ | ((c & 0xf) << 4) | (d & 0xf))
+
+ dimm = get_dimm_by_handle(bus, DIMM_HANDLE(0, 0, 0, 0, 0));
+
+LIBNVDIMM/LIBNDCTL: Region
+--------------------------
+
+A generic REGION device is registered for each PMEM range or BLK-aperture
+set. Per the example there are 6 regions: 2 PMEM and 4 BLK-aperture
+sets on the "nfit_test.0" bus. The primary role of regions are to be a
+container of "mappings". A mapping is a tuple of <DIMM,
+DPA-start-offset, length>.
+
+LIBNVDIMM provides a built-in driver for these REGION devices. This driver
+is responsible for reconciling the aliased DPA mappings across all
+regions, parsing the LABEL, if present, and then emitting NAMESPACE
+devices with the resolved/exclusive DPA-boundaries for the nd_pmem or
+nd_blk device driver to consume.
+
+In addition to the generic attributes of "mapping"s, "interleave_ways"
+and "size" the REGION device also exports some convenience attributes.
+"nstype" indicates the integer type of namespace-device this region
+emits, "devtype" duplicates the DEVTYPE variable stored by udev at the
+'add' event, "modalias" duplicates the MODALIAS variable stored by udev
+at the 'add' event, and finally, the optional "spa_index" is provided in
+the case where the region is defined by a SPA.
+
+LIBNVDIMM: region::
+
+ struct nd_region *nvdimm_pmem_region_create(struct nvdimm_bus *nvdimm_bus,
+ struct nd_region_desc *ndr_desc);
+ struct nd_region *nvdimm_blk_region_create(struct nvdimm_bus *nvdimm_bus,
+ struct nd_region_desc *ndr_desc);
+
+::
+
+ /sys/devices/platform/nfit_test.0/ndbus0
+ |-- region0
+ | |-- available_size
+ | |-- btt0
+ | |-- btt_seed
+ | |-- devtype
+ | |-- driver -> ../../../../../bus/nd/drivers/nd_region
+ | |-- init_namespaces
+ | |-- mapping0
+ | |-- mapping1
+ | |-- mappings
+ | |-- modalias
+ | |-- namespace0.0
+ | |-- namespace_seed
+ | |-- numa_node
+ | |-- nfit
+ | | `-- spa_index
+ | |-- nstype
+ | |-- set_cookie
+ | |-- size
+ | |-- subsystem -> ../../../../../bus/nd
+ | `-- uevent
+ |-- region1
+ [..]
+
+LIBNDCTL: region enumeration example
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Sample region retrieval routines based on NFIT-unique data like
+"spa_index" (interleave set id) for PMEM and "nfit_handle" (dimm id) for
+BLK::
+
+ static struct ndctl_region *get_pmem_region_by_spa_index(struct ndctl_bus *bus,
+ unsigned int spa_index)
+ {
+ struct ndctl_region *region;
+
+ ndctl_region_foreach(bus, region) {
+ if (ndctl_region_get_type(region) != ND_DEVICE_REGION_PMEM)
+ continue;
+ if (ndctl_region_get_spa_index(region) == spa_index)
+ return region;
+ }
+ return NULL;
+ }
+
+ static struct ndctl_region *get_blk_region_by_dimm_handle(struct ndctl_bus *bus,
+ unsigned int handle)
+ {
+ struct ndctl_region *region;
+
+ ndctl_region_foreach(bus, region) {
+ struct ndctl_mapping *map;
+
+ if (ndctl_region_get_type(region) != ND_DEVICE_REGION_BLOCK)
+ continue;
+ ndctl_mapping_foreach(region, map) {
+ struct ndctl_dimm *dimm = ndctl_mapping_get_dimm(map);
+
+ if (ndctl_dimm_get_handle(dimm) == handle)
+ return region;
+ }
+ }
+ return NULL;
+ }
+
+
+Why Not Encode the Region Type into the Region Name?
+----------------------------------------------------
+
+At first glance it seems since NFIT defines just PMEM and BLK interface
+types that we should simply name REGION devices with something derived
+from those type names. However, the ND subsystem explicitly keeps the
+REGION name generic and expects userspace to always consider the
+region-attributes for four reasons:
+
+ 1. There are already more than two REGION and "namespace" types. For
+ PMEM there are two subtypes. As mentioned previously we have PMEM where
+ the constituent DIMM devices are known and anonymous PMEM. For BLK
+ regions the NFIT specification already anticipates vendor specific
+ implementations. The exact distinction of what a region contains is in
+ the region-attributes not the region-name or the region-devtype.
+
+ 2. A region with zero child-namespaces is a possible configuration. For
+ example, the NFIT allows for a DCR to be published without a
+ corresponding BLK-aperture. This equates to a DIMM that can only accept
+ control/configuration messages, but no i/o through a descendant block
+ device. Again, this "type" is advertised in the attributes ('mappings'
+ == 0) and the name does not tell you much.
+
+ 3. What if a third major interface type arises in the future? Outside
+ of vendor specific implementations, it's not difficult to envision a
+ third class of interface type beyond BLK and PMEM. With a generic name
+ for the REGION level of the device-hierarchy old userspace
+ implementations can still make sense of new kernel advertised
+ region-types. Userspace can always rely on the generic region
+ attributes like "mappings", "size", etc and the expected child devices
+ named "namespace". This generic format of the device-model hierarchy
+ allows the LIBNVDIMM and LIBNDCTL implementations to be more uniform and
+ future-proof.
+
+ 4. There are more robust mechanisms for determining the major type of a
+ region than a device name. See the next section, How Do I Determine the
+ Major Type of a Region?
+
+How Do I Determine the Major Type of a Region?
+----------------------------------------------
+
+Outside of the blanket recommendation of "use libndctl", or simply
+looking at the kernel header (/usr/include/linux/ndctl.h) to decode the
+"nstype" integer attribute, here are some other options.
+
+1. module alias lookup
+^^^^^^^^^^^^^^^^^^^^^^
+
+ The whole point of region/namespace device type differentiation is to
+ decide which block-device driver will attach to a given LIBNVDIMM namespace.
+ One can simply use the modalias to lookup the resulting module. It's
+ important to note that this method is robust in the presence of a
+ vendor-specific driver down the road. If a vendor-specific
+ implementation wants to supplant the standard nd_blk driver it can with
+ minimal impact to the rest of LIBNVDIMM.
+
+ In fact, a vendor may also want to have a vendor-specific region-driver
+ (outside of nd_region). For example, if a vendor defined its own LABEL
+ format it would need its own region driver to parse that LABEL and emit
+ the resulting namespaces. The output from module resolution is more
+ accurate than a region-name or region-devtype.
+
+2. udev
+^^^^^^^
+
+ The kernel "devtype" is registered in the udev database::
+
+ # udevadm info --path=/devices/platform/nfit_test.0/ndbus0/region0
+ P: /devices/platform/nfit_test.0/ndbus0/region0
+ E: DEVPATH=/devices/platform/nfit_test.0/ndbus0/region0
+ E: DEVTYPE=nd_pmem
+ E: MODALIAS=nd:t2
+ E: SUBSYSTEM=nd
+
+ # udevadm info --path=/devices/platform/nfit_test.0/ndbus0/region4
+ P: /devices/platform/nfit_test.0/ndbus0/region4
+ E: DEVPATH=/devices/platform/nfit_test.0/ndbus0/region4
+ E: DEVTYPE=nd_blk
+ E: MODALIAS=nd:t3
+ E: SUBSYSTEM=nd
+
+ ...and is available as a region attribute, but keep in mind that the
+ "devtype" does not indicate sub-type variations and scripts should
+ really be understanding the other attributes.
+
+3. type specific attributes
+^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+ As it currently stands a BLK-aperture region will never have a
+ "nfit/spa_index" attribute, but neither will a non-NFIT PMEM region. A
+ BLK region with a "mappings" value of 0 is, as mentioned above, a DIMM
+ that does not allow I/O. A PMEM region with a "mappings" value of zero
+ is a simple system-physical-address range.
+
+
+LIBNVDIMM/LIBNDCTL: Namespace
+-----------------------------
+
+A REGION, after resolving DPA aliasing and LABEL specified boundaries,
+surfaces one or more "namespace" devices. The arrival of a "namespace"
+device currently triggers either the nd_blk or nd_pmem driver to load
+and register a disk/block device.
+
+LIBNVDIMM: namespace
+^^^^^^^^^^^^^^^^^^^^
+
+Here is a sample layout from the three major types of NAMESPACE where
+namespace0.0 represents DIMM-info-backed PMEM (note that it has a 'uuid'
+attribute), namespace2.0 represents a BLK namespace (note it has a
+'sector_size' attribute) that, and namespace6.0 represents an anonymous
+PMEM namespace (note that has no 'uuid' attribute due to not support a
+LABEL)::
+
+ /sys/devices/platform/nfit_test.0/ndbus0/region0/namespace0.0
+ |-- alt_name
+ |-- devtype
+ |-- dpa_extents
+ |-- force_raw
+ |-- modalias
+ |-- numa_node
+ |-- resource
+ |-- size
+ |-- subsystem -> ../../../../../../bus/nd
+ |-- type
+ |-- uevent
+ `-- uuid
+ /sys/devices/platform/nfit_test.0/ndbus0/region2/namespace2.0
+ |-- alt_name
+ |-- devtype
+ |-- dpa_extents
+ |-- force_raw
+ |-- modalias
+ |-- numa_node
+ |-- sector_size
+ |-- size
+ |-- subsystem -> ../../../../../../bus/nd
+ |-- type
+ |-- uevent
+ `-- uuid
+ /sys/devices/platform/nfit_test.1/ndbus1/region6/namespace6.0
+ |-- block
+ | `-- pmem0
+ |-- devtype
+ |-- driver -> ../../../../../../bus/nd/drivers/pmem
+ |-- force_raw
+ |-- modalias
+ |-- numa_node
+ |-- resource
+ |-- size
+ |-- subsystem -> ../../../../../../bus/nd
+ |-- type
+ `-- uevent
+
+LIBNDCTL: namespace enumeration example
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+Namespaces are indexed relative to their parent region, example below.
+These indexes are mostly static from boot to boot, but subsystem makes
+no guarantees in this regard. For a static namespace identifier use its
+'uuid' attribute.
+
+::
+
+ static struct ndctl_namespace
+ *get_namespace_by_id(struct ndctl_region *region, unsigned int id)
+ {
+ struct ndctl_namespace *ndns;
+
+ ndctl_namespace_foreach(region, ndns)
+ if (ndctl_namespace_get_id(ndns) == id)
+ return ndns;
+
+ return NULL;
+ }
+
+LIBNDCTL: namespace creation example
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Idle namespaces are automatically created by the kernel if a given
+region has enough available capacity to create a new namespace.
+Namespace instantiation involves finding an idle namespace and
+configuring it. For the most part the setting of namespace attributes
+can occur in any order, the only constraint is that 'uuid' must be set
+before 'size'. This enables the kernel to track DPA allocations
+internally with a static identifier::
+
+ static int configure_namespace(struct ndctl_region *region,
+ struct ndctl_namespace *ndns,
+ struct namespace_parameters *parameters)
+ {
+ char devname[50];
+
+ snprintf(devname, sizeof(devname), "namespace%d.%d",
+ ndctl_region_get_id(region), paramaters->id);
+
+ ndctl_namespace_set_alt_name(ndns, devname);
+ /* 'uuid' must be set prior to setting size! */
+ ndctl_namespace_set_uuid(ndns, paramaters->uuid);
+ ndctl_namespace_set_size(ndns, paramaters->size);
+ /* unlike pmem namespaces, blk namespaces have a sector size */
+ if (parameters->lbasize)
+ ndctl_namespace_set_sector_size(ndns, parameters->lbasize);
+ ndctl_namespace_enable(ndns);
+ }
+
+
+Why the Term "namespace"?
+^^^^^^^^^^^^^^^^^^^^^^^^^
+
+ 1. Why not "volume" for instance? "volume" ran the risk of confusing
+ ND (libnvdimm subsystem) to a volume manager like device-mapper.
+
+ 2. The term originated to describe the sub-devices that can be created
+ within a NVME controller (see the nvme specification:
+ http://www.nvmexpress.org/specifications/), and NFIT namespaces are
+ meant to parallel the capabilities and configurability of
+ NVME-namespaces.
+
+
+LIBNVDIMM/LIBNDCTL: Block Translation Table "btt"
+-------------------------------------------------
+
+A BTT (design document: http://pmem.io/2014/09/23/btt.html) is a stacked
+block device driver that fronts either the whole block device or a
+partition of a block device emitted by either a PMEM or BLK NAMESPACE.
+
+LIBNVDIMM: btt layout
+^^^^^^^^^^^^^^^^^^^^^
+
+Every region will start out with at least one BTT device which is the
+seed device. To activate it set the "namespace", "uuid", and
+"sector_size" attributes and then bind the device to the nd_pmem or
+nd_blk driver depending on the region type::
+
+ /sys/devices/platform/nfit_test.1/ndbus0/region0/btt0/
+ |-- namespace
+ |-- delete
+ |-- devtype
+ |-- modalias
+ |-- numa_node
+ |-- sector_size
+ |-- subsystem -> ../../../../../bus/nd
+ |-- uevent
+ `-- uuid
+
+LIBNDCTL: btt creation example
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Similar to namespaces an idle BTT device is automatically created per
+region. Each time this "seed" btt device is configured and enabled a new
+seed is created. Creating a BTT configuration involves two steps of
+finding and idle BTT and assigning it to consume a PMEM or BLK namespace::
+
+ static struct ndctl_btt *get_idle_btt(struct ndctl_region *region)
+ {
+ struct ndctl_btt *btt;
+
+ ndctl_btt_foreach(region, btt)
+ if (!ndctl_btt_is_enabled(btt)
+ && !ndctl_btt_is_configured(btt))
+ return btt;
+
+ return NULL;
+ }
+
+ static int configure_btt(struct ndctl_region *region,
+ struct btt_parameters *parameters)
+ {
+ btt = get_idle_btt(region);
+
+ ndctl_btt_set_uuid(btt, parameters->uuid);
+ ndctl_btt_set_sector_size(btt, parameters->sector_size);
+ ndctl_btt_set_namespace(btt, parameters->ndns);
+ /* turn off raw mode device */
+ ndctl_namespace_disable(parameters->ndns);
+ /* turn on btt access */
+ ndctl_btt_enable(btt);
+ }
+
+Once instantiated a new inactive btt seed device will appear underneath
+the region.
+
+Once a "namespace" is removed from a BTT that instance of the BTT device
+will be deleted or otherwise reset to default values. This deletion is
+only at the device model level. In order to destroy a BTT the "info
+block" needs to be destroyed. Note, that to destroy a BTT the media
+needs to be written in raw mode. By default, the kernel will autodetect
+the presence of a BTT and disable raw mode. This autodetect behavior
+can be suppressed by enabling raw mode for the namespace via the
+ndctl_namespace_set_raw_mode() API.
+
+
+Summary LIBNDCTL Diagram
+------------------------
+
+For the given example above, here is the view of the objects as seen by the
+LIBNDCTL API::
+
+ +---+
+ |CTX| +---------+ +--------------+ +---------------+
+ +-+-+ +-> REGION0 +---> NAMESPACE0.0 +--> PMEM8 "pm0.0" |
+ | | +---------+ +--------------+ +---------------+
+ +-------+ | | +---------+ +--------------+ +---------------+
+ | DIMM0 <-+ | +-> REGION1 +---> NAMESPACE1.0 +--> PMEM6 "pm1.0" |
+ +-------+ | | | +---------+ +--------------+ +---------------+
+ | DIMM1 <-+ +-v--+ | +---------+ +--------------+ +---------------+
+ +-------+ +-+BUS0+---> REGION2 +-+-> NAMESPACE2.0 +--> ND6 "blk2.0" |
+ | DIMM2 <-+ +----+ | +---------+ | +--------------+ +----------------------+
+ +-------+ | | +-> NAMESPACE2.1 +--> ND5 "blk2.1" | BTT2 |
+ | DIMM3 <-+ | +--------------+ +----------------------+
+ +-------+ | +---------+ +--------------+ +---------------+
+ +-> REGION3 +-+-> NAMESPACE3.0 +--> ND4 "blk3.0" |
+ | +---------+ | +--------------+ +----------------------+
+ | +-> NAMESPACE3.1 +--> ND3 "blk3.1" | BTT1 |
+ | +--------------+ +----------------------+
+ | +---------+ +--------------+ +---------------+
+ +-> REGION4 +---> NAMESPACE4.0 +--> ND2 "blk4.0" |
+ | +---------+ +--------------+ +---------------+
+ | +---------+ +--------------+ +----------------------+
+ +-> REGION5 +---> NAMESPACE5.0 +--> ND1 "blk5.0" | BTT0 |
+ +---------+ +--------------+ +---------------+------+
diff --git a/Documentation/driver-api/nvdimm/security.rst b/Documentation/driver-api/nvdimm/security.rst
new file mode 100644
index 000000000000..ad9dea099b34
--- /dev/null
+++ b/Documentation/driver-api/nvdimm/security.rst
@@ -0,0 +1,143 @@
+===============
+NVDIMM Security
+===============
+
+1. Introduction
+---------------
+
+With the introduction of Intel Device Specific Methods (DSM) v1.8
+specification [1], security DSMs are introduced. The spec added the following
+security DSMs: "get security state", "set passphrase", "disable passphrase",
+"unlock unit", "freeze lock", "secure erase", and "overwrite". A security_ops
+data structure has been added to struct dimm in order to support the security
+operations and generic APIs are exposed to allow vendor neutral operations.
+
+2. Sysfs Interface
+------------------
+The "security" sysfs attribute is provided in the nvdimm sysfs directory. For
+example:
+/sys/devices/LNXSYSTM:00/LNXSYBUS:00/ACPI0012:00/ndbus0/nmem0/security
+
+The "show" attribute of that attribute will display the security state for
+that DIMM. The following states are available: disabled, unlocked, locked,
+frozen, and overwrite. If security is not supported, the sysfs attribute
+will not be visible.
+
+The "store" attribute takes several commands when it is being written to
+in order to support some of the security functionalities:
+update <old_keyid> <new_keyid> - enable or update passphrase.
+disable <keyid> - disable enabled security and remove key.
+freeze - freeze changing of security states.
+erase <keyid> - delete existing user encryption key.
+overwrite <keyid> - wipe the entire nvdimm.
+master_update <keyid> <new_keyid> - enable or update master passphrase.
+master_erase <keyid> - delete existing user encryption key.
+
+3. Key Management
+-----------------
+
+The key is associated to the payload by the DIMM id. For example:
+# cat /sys/devices/LNXSYSTM:00/LNXSYBUS:00/ACPI0012:00/ndbus0/nmem0/nfit/id
+8089-a2-1740-00000133
+The DIMM id would be provided along with the key payload (passphrase) to
+the kernel.
+
+The security keys are managed on the basis of a single key per DIMM. The
+key "passphrase" is expected to be 32bytes long. This is similar to the ATA
+security specification [2]. A key is initially acquired via the request_key()
+kernel API call during nvdimm unlock. It is up to the user to make sure that
+all the keys are in the kernel user keyring for unlock.
+
+A nvdimm encrypted-key of format enc32 has the description format of:
+nvdimm:<bus-provider-specific-unique-id>
+
+See file ``Documentation/security/keys/trusted-encrypted.rst`` for creating
+encrypted-keys of enc32 format. TPM usage with a master trusted key is
+preferred for sealing the encrypted-keys.
+
+4. Unlocking
+------------
+When the DIMMs are being enumerated by the kernel, the kernel will attempt to
+retrieve the key from the kernel user keyring. This is the only time
+a locked DIMM can be unlocked. Once unlocked, the DIMM will remain unlocked
+until reboot. Typically an entity (i.e. shell script) will inject all the
+relevant encrypted-keys into the kernel user keyring during the initramfs phase.
+This provides the unlock function access to all the related keys that contain
+the passphrase for the respective nvdimms. It is also recommended that the
+keys are injected before libnvdimm is loaded by modprobe.
+
+5. Update
+---------
+When doing an update, it is expected that the existing key is removed from
+the kernel user keyring and reinjected as different (old) key. It's irrelevant
+what the key description is for the old key since we are only interested in the
+keyid when doing the update operation. It is also expected that the new key
+is injected with the description format described from earlier in this
+document. The update command written to the sysfs attribute will be with
+the format:
+update <old keyid> <new keyid>
+
+If there is no old keyid due to a security enabling, then a 0 should be
+passed in.
+
+6. Freeze
+---------
+The freeze operation does not require any keys. The security config can be
+frozen by a user with root privelege.
+
+7. Disable
+----------
+The security disable command format is:
+disable <keyid>
+
+An key with the current passphrase payload that is tied to the nvdimm should be
+in the kernel user keyring.
+
+8. Secure Erase
+---------------
+The command format for doing a secure erase is:
+erase <keyid>
+
+An key with the current passphrase payload that is tied to the nvdimm should be
+in the kernel user keyring.
+
+9. Overwrite
+------------
+The command format for doing an overwrite is:
+overwrite <keyid>
+
+Overwrite can be done without a key if security is not enabled. A key serial
+of 0 can be passed in to indicate no key.
+
+The sysfs attribute "security" can be polled to wait on overwrite completion.
+Overwrite can last tens of minutes or more depending on nvdimm size.
+
+An encrypted-key with the current user passphrase that is tied to the nvdimm
+should be injected and its keyid should be passed in via sysfs.
+
+10. Master Update
+-----------------
+The command format for doing a master update is:
+update <old keyid> <new keyid>
+
+The operating mechanism for master update is identical to update except the
+master passphrase key is passed to the kernel. The master passphrase key
+is just another encrypted-key.
+
+This command is only available when security is disabled.
+
+11. Master Erase
+----------------
+The command format for doing a master erase is:
+master_erase <current keyid>
+
+This command has the same operating mechanism as erase except the master
+passphrase key is passed to the kernel. The master passphrase key is just
+another encrypted-key.
+
+This command is only available when the master security is enabled, indicated
+by the extended security status.
+
+[1]: http://pmem.io/documents/NVDIMM_DSM_Interface-V1.8.pdf
+
+[2]: http://www.t13.org/documents/UploadedDocuments/docs2006/e05179r4-ACS-SecurityClarifications.pdf
diff --git a/Documentation/driver-api/nvmem.rst b/Documentation/driver-api/nvmem.rst
new file mode 100644
index 000000000000..d9d958d5c824
--- /dev/null
+++ b/Documentation/driver-api/nvmem.rst
@@ -0,0 +1,189 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+===============
+NVMEM Subsystem
+===============
+
+ Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+This document explains the NVMEM Framework along with the APIs provided,
+and how to use it.
+
+1. Introduction
+===============
+*NVMEM* is the abbreviation for Non Volatile Memory layer. It is used to
+retrieve configuration of SOC or Device specific data from non volatile
+memories like eeprom, efuses and so on.
+
+Before this framework existed, NVMEM drivers like eeprom were stored in
+drivers/misc, where they all had to duplicate pretty much the same code to
+register a sysfs file, allow in-kernel users to access the content of the
+devices they were driving, etc.
+
+This was also a problem as far as other in-kernel users were involved, since
+the solutions used were pretty much different from one driver to another, there
+was a rather big abstraction leak.
+
+This framework aims at solve these problems. It also introduces DT
+representation for consumer devices to go get the data they require (MAC
+Addresses, SoC/Revision ID, part numbers, and so on) from the NVMEMs. This
+framework is based on regmap, so that most of the abstraction available in
+regmap can be reused, across multiple types of buses.
+
+NVMEM Providers
++++++++++++++++
+
+NVMEM provider refers to an entity that implements methods to initialize, read
+and write the non-volatile memory.
+
+2. Registering/Unregistering the NVMEM provider
+===============================================
+
+A NVMEM provider can register with NVMEM core by supplying relevant
+nvmem configuration to nvmem_register(), on success core would return a valid
+nvmem_device pointer.
+
+nvmem_unregister(nvmem) is used to unregister a previously registered provider.
+
+For example, a simple qfprom case::
+
+ static struct nvmem_config econfig = {
+ .name = "qfprom",
+ .owner = THIS_MODULE,
+ };
+
+ static int qfprom_probe(struct platform_device *pdev)
+ {
+ ...
+ econfig.dev = &pdev->dev;
+ nvmem = nvmem_register(&econfig);
+ ...
+ }
+
+It is mandatory that the NVMEM provider has a regmap associated with its
+struct device. Failure to do would return error code from nvmem_register().
+
+Users of board files can define and register nvmem cells using the
+nvmem_cell_table struct::
+
+ static struct nvmem_cell_info foo_nvmem_cells[] = {
+ {
+ .name = "macaddr",
+ .offset = 0x7f00,
+ .bytes = ETH_ALEN,
+ }
+ };
+
+ static struct nvmem_cell_table foo_nvmem_cell_table = {
+ .nvmem_name = "i2c-eeprom",
+ .cells = foo_nvmem_cells,
+ .ncells = ARRAY_SIZE(foo_nvmem_cells),
+ };
+
+ nvmem_add_cell_table(&foo_nvmem_cell_table);
+
+Additionally it is possible to create nvmem cell lookup entries and register
+them with the nvmem framework from machine code as shown in the example below::
+
+ static struct nvmem_cell_lookup foo_nvmem_lookup = {
+ .nvmem_name = "i2c-eeprom",
+ .cell_name = "macaddr",
+ .dev_id = "foo_mac.0",
+ .con_id = "mac-address",
+ };
+
+ nvmem_add_cell_lookups(&foo_nvmem_lookup, 1);
+
+NVMEM Consumers
++++++++++++++++
+
+NVMEM consumers are the entities which make use of the NVMEM provider to
+read from and to NVMEM.
+
+3. NVMEM cell based consumer APIs
+=================================
+
+NVMEM cells are the data entries/fields in the NVMEM.
+The NVMEM framework provides 3 APIs to read/write NVMEM cells::
+
+ struct nvmem_cell *nvmem_cell_get(struct device *dev, const char *name);
+ struct nvmem_cell *devm_nvmem_cell_get(struct device *dev, const char *name);
+
+ void nvmem_cell_put(struct nvmem_cell *cell);
+ void devm_nvmem_cell_put(struct device *dev, struct nvmem_cell *cell);
+
+ void *nvmem_cell_read(struct nvmem_cell *cell, ssize_t *len);
+ int nvmem_cell_write(struct nvmem_cell *cell, void *buf, ssize_t len);
+
+`*nvmem_cell_get()` apis will get a reference to nvmem cell for a given id,
+and nvmem_cell_read/write() can then read or write to the cell.
+Once the usage of the cell is finished the consumer should call
+`*nvmem_cell_put()` to free all the allocation memory for the cell.
+
+4. Direct NVMEM device based consumer APIs
+==========================================
+
+In some instances it is necessary to directly read/write the NVMEM.
+To facilitate such consumers NVMEM framework provides below apis::
+
+ struct nvmem_device *nvmem_device_get(struct device *dev, const char *name);
+ struct nvmem_device *devm_nvmem_device_get(struct device *dev,
+ const char *name);
+ void nvmem_device_put(struct nvmem_device *nvmem);
+ int nvmem_device_read(struct nvmem_device *nvmem, unsigned int offset,
+ size_t bytes, void *buf);
+ int nvmem_device_write(struct nvmem_device *nvmem, unsigned int offset,
+ size_t bytes, void *buf);
+ int nvmem_device_cell_read(struct nvmem_device *nvmem,
+ struct nvmem_cell_info *info, void *buf);
+ int nvmem_device_cell_write(struct nvmem_device *nvmem,
+ struct nvmem_cell_info *info, void *buf);
+
+Before the consumers can read/write NVMEM directly, it should get hold
+of nvmem_controller from one of the `*nvmem_device_get()` api.
+
+The difference between these apis and cell based apis is that these apis always
+take nvmem_device as parameter.
+
+5. Releasing a reference to the NVMEM
+=====================================
+
+When a consumer no longer needs the NVMEM, it has to release the reference
+to the NVMEM it has obtained using the APIs mentioned in the above section.
+The NVMEM framework provides 2 APIs to release a reference to the NVMEM::
+
+ void nvmem_cell_put(struct nvmem_cell *cell);
+ void devm_nvmem_cell_put(struct device *dev, struct nvmem_cell *cell);
+ void nvmem_device_put(struct nvmem_device *nvmem);
+ void devm_nvmem_device_put(struct device *dev, struct nvmem_device *nvmem);
+
+Both these APIs are used to release a reference to the NVMEM and
+devm_nvmem_cell_put and devm_nvmem_device_put destroys the devres associated
+with this NVMEM.
+
+Userspace
++++++++++
+
+6. Userspace binary interface
+==============================
+
+Userspace can read/write the raw NVMEM file located at::
+
+ /sys/bus/nvmem/devices/*/nvmem
+
+ex::
+
+ hexdump /sys/bus/nvmem/devices/qfprom0/nvmem
+
+ 0000000 0000 0000 0000 0000 0000 0000 0000 0000
+ *
+ 00000a0 db10 2240 0000 e000 0c00 0c00 0000 0c00
+ 0000000 0000 0000 0000 0000 0000 0000 0000 0000
+ ...
+ *
+ 0001000
+
+7. DeviceTree Binding
+=====================
+
+See Documentation/devicetree/bindings/nvmem/nvmem.txt
diff --git a/Documentation/driver-api/parport-lowlevel.rst b/Documentation/driver-api/parport-lowlevel.rst
new file mode 100644
index 000000000000..0633d70ffda7
--- /dev/null
+++ b/Documentation/driver-api/parport-lowlevel.rst
@@ -0,0 +1,1832 @@
+===============================
+PARPORT interface documentation
+===============================
+
+:Time-stamp: <2000-02-24 13:30:20 twaugh>
+
+Described here are the following functions:
+
+Global functions::
+ parport_register_driver
+ parport_unregister_driver
+ parport_enumerate
+ parport_register_device
+ parport_unregister_device
+ parport_claim
+ parport_claim_or_block
+ parport_release
+ parport_yield
+ parport_yield_blocking
+ parport_wait_peripheral
+ parport_poll_peripheral
+ parport_wait_event
+ parport_negotiate
+ parport_read
+ parport_write
+ parport_open
+ parport_close
+ parport_device_id
+ parport_device_coords
+ parport_find_class
+ parport_find_device
+ parport_set_timeout
+
+Port functions (can be overridden by low-level drivers):
+
+ SPP::
+ port->ops->read_data
+ port->ops->write_data
+ port->ops->read_status
+ port->ops->read_control
+ port->ops->write_control
+ port->ops->frob_control
+ port->ops->enable_irq
+ port->ops->disable_irq
+ port->ops->data_forward
+ port->ops->data_reverse
+
+ EPP::
+ port->ops->epp_write_data
+ port->ops->epp_read_data
+ port->ops->epp_write_addr
+ port->ops->epp_read_addr
+
+ ECP::
+ port->ops->ecp_write_data
+ port->ops->ecp_read_data
+ port->ops->ecp_write_addr
+
+ Other::
+ port->ops->nibble_read_data
+ port->ops->byte_read_data
+ port->ops->compat_write_data
+
+The parport subsystem comprises ``parport`` (the core port-sharing
+code), and a variety of low-level drivers that actually do the port
+accesses. Each low-level driver handles a particular style of port
+(PC, Amiga, and so on).
+
+The parport interface to the device driver author can be broken down
+into global functions and port functions.
+
+The global functions are mostly for communicating between the device
+driver and the parport subsystem: acquiring a list of available ports,
+claiming a port for exclusive use, and so on. They also include
+``generic`` functions for doing standard things that will work on any
+IEEE 1284-capable architecture.
+
+The port functions are provided by the low-level drivers, although the
+core parport module provides generic ``defaults`` for some routines.
+The port functions can be split into three groups: SPP, EPP, and ECP.
+
+SPP (Standard Parallel Port) functions modify so-called ``SPP``
+registers: data, status, and control. The hardware may not actually
+have registers exactly like that, but the PC does and this interface is
+modelled after common PC implementations. Other low-level drivers may
+be able to emulate most of the functionality.
+
+EPP (Enhanced Parallel Port) functions are provided for reading and
+writing in IEEE 1284 EPP mode, and ECP (Extended Capabilities Port)
+functions are used for IEEE 1284 ECP mode. (What about BECP? Does
+anyone care?)
+
+Hardware assistance for EPP and/or ECP transfers may or may not be
+available, and if it is available it may or may not be used. If
+hardware is not used, the transfer will be software-driven. In order
+to cope with peripherals that only tenuously support IEEE 1284, a
+low-level driver specific function is provided, for altering 'fudge
+factors'.
+
+Global functions
+================
+
+parport_register_driver - register a device driver with parport
+---------------------------------------------------------------
+
+SYNOPSIS
+^^^^^^^^
+
+::
+
+ #include <linux/parport.h>
+
+ struct parport_driver {
+ const char *name;
+ void (*attach) (struct parport *);
+ void (*detach) (struct parport *);
+ struct parport_driver *next;
+ };
+ int parport_register_driver (struct parport_driver *driver);
+
+DESCRIPTION
+^^^^^^^^^^^
+
+In order to be notified about parallel ports when they are detected,
+parport_register_driver should be called. Your driver will
+immediately be notified of all ports that have already been detected,
+and of each new port as low-level drivers are loaded.
+
+A ``struct parport_driver`` contains the textual name of your driver,
+a pointer to a function to handle new ports, and a pointer to a
+function to handle ports going away due to a low-level driver
+unloading. Ports will only be detached if they are not being used
+(i.e. there are no devices registered on them).
+
+The visible parts of the ``struct parport *`` argument given to
+attach/detach are::
+
+ struct parport
+ {
+ struct parport *next; /* next parport in list */
+ const char *name; /* port's name */
+ unsigned int modes; /* bitfield of hardware modes */
+ struct parport_device_info probe_info;
+ /* IEEE1284 info */
+ int number; /* parport index */
+ struct parport_operations *ops;
+ ...
+ };
+
+There are other members of the structure, but they should not be
+touched.
+
+The ``modes`` member summarises the capabilities of the underlying
+hardware. It consists of flags which may be bitwise-ored together:
+
+ ============================= ===============================================
+ PARPORT_MODE_PCSPP IBM PC registers are available,
+ i.e. functions that act on data,
+ control and status registers are
+ probably writing directly to the
+ hardware.
+ PARPORT_MODE_TRISTATE The data drivers may be turned off.
+ This allows the data lines to be used
+ for reverse (peripheral to host)
+ transfers.
+ PARPORT_MODE_COMPAT The hardware can assist with
+ compatibility-mode (printer)
+ transfers, i.e. compat_write_block.
+ PARPORT_MODE_EPP The hardware can assist with EPP
+ transfers.
+ PARPORT_MODE_ECP The hardware can assist with ECP
+ transfers.
+ PARPORT_MODE_DMA The hardware can use DMA, so you might
+ want to pass ISA DMA-able memory
+ (i.e. memory allocated using the
+ GFP_DMA flag with kmalloc) to the
+ low-level driver in order to take
+ advantage of it.
+ ============================= ===============================================
+
+There may be other flags in ``modes`` as well.
+
+The contents of ``modes`` is advisory only. For example, if the
+hardware is capable of DMA, and PARPORT_MODE_DMA is in ``modes``, it
+doesn't necessarily mean that DMA will always be used when possible.
+Similarly, hardware that is capable of assisting ECP transfers won't
+necessarily be used.
+
+RETURN VALUE
+^^^^^^^^^^^^
+
+Zero on success, otherwise an error code.
+
+ERRORS
+^^^^^^
+
+None. (Can it fail? Why return int?)
+
+EXAMPLE
+^^^^^^^
+
+::
+
+ static void lp_attach (struct parport *port)
+ {
+ ...
+ private = kmalloc (...);
+ dev[count++] = parport_register_device (...);
+ ...
+ }
+
+ static void lp_detach (struct parport *port)
+ {
+ ...
+ }
+
+ static struct parport_driver lp_driver = {
+ "lp",
+ lp_attach,
+ lp_detach,
+ NULL /* always put NULL here */
+ };
+
+ int lp_init (void)
+ {
+ ...
+ if (parport_register_driver (&lp_driver)) {
+ /* Failed; nothing we can do. */
+ return -EIO;
+ }
+ ...
+ }
+
+
+SEE ALSO
+^^^^^^^^
+
+parport_unregister_driver, parport_register_device, parport_enumerate
+
+
+
+parport_unregister_driver - tell parport to forget about this driver
+--------------------------------------------------------------------
+
+SYNOPSIS
+^^^^^^^^
+
+::
+
+ #include <linux/parport.h>
+
+ struct parport_driver {
+ const char *name;
+ void (*attach) (struct parport *);
+ void (*detach) (struct parport *);
+ struct parport_driver *next;
+ };
+ void parport_unregister_driver (struct parport_driver *driver);
+
+DESCRIPTION
+^^^^^^^^^^^
+
+This tells parport not to notify the device driver of new ports or of
+ports going away. Registered devices belonging to that driver are NOT
+unregistered: parport_unregister_device must be used for each one.
+
+EXAMPLE
+^^^^^^^
+
+::
+
+ void cleanup_module (void)
+ {
+ ...
+ /* Stop notifications. */
+ parport_unregister_driver (&lp_driver);
+
+ /* Unregister devices. */
+ for (i = 0; i < NUM_DEVS; i++)
+ parport_unregister_device (dev[i]);
+ ...
+ }
+
+SEE ALSO
+^^^^^^^^
+
+parport_register_driver, parport_enumerate
+
+
+
+parport_enumerate - retrieve a list of parallel ports (DEPRECATED)
+------------------------------------------------------------------
+
+SYNOPSIS
+^^^^^^^^
+
+::
+
+ #include <linux/parport.h>
+
+ struct parport *parport_enumerate (void);
+
+DESCRIPTION
+^^^^^^^^^^^
+
+Retrieve the first of a list of valid parallel ports for this machine.
+Successive parallel ports can be found using the ``struct parport
+*next`` element of the ``struct parport *`` that is returned. If ``next``
+is NULL, there are no more parallel ports in the list. The number of
+ports in the list will not exceed PARPORT_MAX.
+
+RETURN VALUE
+^^^^^^^^^^^^
+
+A ``struct parport *`` describing a valid parallel port for the machine,
+or NULL if there are none.
+
+ERRORS
+^^^^^^
+
+This function can return NULL to indicate that there are no parallel
+ports to use.
+
+EXAMPLE
+^^^^^^^
+
+::
+
+ int detect_device (void)
+ {
+ struct parport *port;
+
+ for (port = parport_enumerate ();
+ port != NULL;
+ port = port->next) {
+ /* Try to detect a device on the port... */
+ ...
+ }
+ }
+
+ ...
+ }
+
+NOTES
+^^^^^
+
+parport_enumerate is deprecated; parport_register_driver should be
+used instead.
+
+SEE ALSO
+^^^^^^^^
+
+parport_register_driver, parport_unregister_driver
+
+
+
+parport_register_device - register to use a port
+------------------------------------------------
+
+SYNOPSIS
+^^^^^^^^
+
+::
+
+ #include <linux/parport.h>
+
+ typedef int (*preempt_func) (void *handle);
+ typedef void (*wakeup_func) (void *handle);
+ typedef int (*irq_func) (int irq, void *handle, struct pt_regs *);
+
+ struct pardevice *parport_register_device(struct parport *port,
+ const char *name,
+ preempt_func preempt,
+ wakeup_func wakeup,
+ irq_func irq,
+ int flags,
+ void *handle);
+
+DESCRIPTION
+^^^^^^^^^^^
+
+Use this function to register your device driver on a parallel port
+(``port``). Once you have done that, you will be able to use
+parport_claim and parport_release in order to use the port.
+
+The (``name``) argument is the name of the device that appears in /proc
+filesystem. The string must be valid for the whole lifetime of the
+device (until parport_unregister_device is called).
+
+This function will register three callbacks into your driver:
+``preempt``, ``wakeup`` and ``irq``. Each of these may be NULL in order to
+indicate that you do not want a callback.
+
+When the ``preempt`` function is called, it is because another driver
+wishes to use the parallel port. The ``preempt`` function should return
+non-zero if the parallel port cannot be released yet -- if zero is
+returned, the port is lost to another driver and the port must be
+re-claimed before use.
+
+The ``wakeup`` function is called once another driver has released the
+port and no other driver has yet claimed it. You can claim the
+parallel port from within the ``wakeup`` function (in which case the
+claim is guaranteed to succeed), or choose not to if you don't need it
+now.
+
+If an interrupt occurs on the parallel port your driver has claimed,
+the ``irq`` function will be called. (Write something about shared
+interrupts here.)
+
+The ``handle`` is a pointer to driver-specific data, and is passed to
+the callback functions.
+
+``flags`` may be a bitwise combination of the following flags:
+
+ ===================== =================================================
+ Flag Meaning
+ ===================== =================================================
+ PARPORT_DEV_EXCL The device cannot share the parallel port at all.
+ Use this only when absolutely necessary.
+ ===================== =================================================
+
+The typedefs are not actually defined -- they are only shown in order
+to make the function prototype more readable.
+
+The visible parts of the returned ``struct pardevice`` are::
+
+ struct pardevice {
+ struct parport *port; /* Associated port */
+ void *private; /* Device driver's 'handle' */
+ ...
+ };
+
+RETURN VALUE
+^^^^^^^^^^^^
+
+A ``struct pardevice *``: a handle to the registered parallel port
+device that can be used for parport_claim, parport_release, etc.
+
+ERRORS
+^^^^^^
+
+A return value of NULL indicates that there was a problem registering
+a device on that port.
+
+EXAMPLE
+^^^^^^^
+
+::
+
+ static int preempt (void *handle)
+ {
+ if (busy_right_now)
+ return 1;
+
+ must_reclaim_port = 1;
+ return 0;
+ }
+
+ static void wakeup (void *handle)
+ {
+ struct toaster *private = handle;
+ struct pardevice *dev = private->dev;
+ if (!dev) return; /* avoid races */
+
+ if (want_port)
+ parport_claim (dev);
+ }
+
+ static int toaster_detect (struct toaster *private, struct parport *port)
+ {
+ private->dev = parport_register_device (port, "toaster", preempt,
+ wakeup, NULL, 0,
+ private);
+ if (!private->dev)
+ /* Couldn't register with parport. */
+ return -EIO;
+
+ must_reclaim_port = 0;
+ busy_right_now = 1;
+ parport_claim_or_block (private->dev);
+ ...
+ /* Don't need the port while the toaster warms up. */
+ busy_right_now = 0;
+ ...
+ busy_right_now = 1;
+ if (must_reclaim_port) {
+ parport_claim_or_block (private->dev);
+ must_reclaim_port = 0;
+ }
+ ...
+ }
+
+SEE ALSO
+^^^^^^^^
+
+parport_unregister_device, parport_claim
+
+
+
+parport_unregister_device - finish using a port
+-----------------------------------------------
+
+SYNPOPSIS
+
+::
+
+ #include <linux/parport.h>
+
+ void parport_unregister_device (struct pardevice *dev);
+
+DESCRIPTION
+^^^^^^^^^^^
+
+This function is the opposite of parport_register_device. After using
+parport_unregister_device, ``dev`` is no longer a valid device handle.
+
+You should not unregister a device that is currently claimed, although
+if you do it will be released automatically.
+
+EXAMPLE
+^^^^^^^
+
+::
+
+ ...
+ kfree (dev->private); /* before we lose the pointer */
+ parport_unregister_device (dev);
+ ...
+
+SEE ALSO
+^^^^^^^^
+
+
+parport_unregister_driver
+
+parport_claim, parport_claim_or_block - claim the parallel port for a device
+----------------------------------------------------------------------------
+
+SYNOPSIS
+^^^^^^^^
+
+::
+
+ #include <linux/parport.h>
+
+ int parport_claim (struct pardevice *dev);
+ int parport_claim_or_block (struct pardevice *dev);
+
+DESCRIPTION
+^^^^^^^^^^^
+
+These functions attempt to gain control of the parallel port on which
+``dev`` is registered. ``parport_claim`` does not block, but
+``parport_claim_or_block`` may do. (Put something here about blocking
+interruptibly or non-interruptibly.)
+
+You should not try to claim a port that you have already claimed.
+
+RETURN VALUE
+^^^^^^^^^^^^
+
+A return value of zero indicates that the port was successfully
+claimed, and the caller now has possession of the parallel port.
+
+If ``parport_claim_or_block`` blocks before returning successfully, the
+return value is positive.
+
+ERRORS
+^^^^^^
+
+========== ==========================================================
+ -EAGAIN The port is unavailable at the moment, but another attempt
+ to claim it may succeed.
+========== ==========================================================
+
+SEE ALSO
+^^^^^^^^
+
+
+parport_release
+
+parport_release - release the parallel port
+-------------------------------------------
+
+SYNOPSIS
+^^^^^^^^
+
+::
+
+ #include <linux/parport.h>
+
+ void parport_release (struct pardevice *dev);
+
+DESCRIPTION
+^^^^^^^^^^^
+
+Once a parallel port device has been claimed, it can be released using
+``parport_release``. It cannot fail, but you should not release a
+device that you do not have possession of.
+
+EXAMPLE
+^^^^^^^
+
+::
+
+ static size_t write (struct pardevice *dev, const void *buf,
+ size_t len)
+ {
+ ...
+ written = dev->port->ops->write_ecp_data (dev->port, buf,
+ len);
+ parport_release (dev);
+ ...
+ }
+
+
+SEE ALSO
+^^^^^^^^
+
+change_mode, parport_claim, parport_claim_or_block, parport_yield
+
+
+
+parport_yield, parport_yield_blocking - temporarily release a parallel port
+---------------------------------------------------------------------------
+
+SYNOPSIS
+^^^^^^^^
+
+::
+
+ #include <linux/parport.h>
+
+ int parport_yield (struct pardevice *dev)
+ int parport_yield_blocking (struct pardevice *dev);
+
+DESCRIPTION
+^^^^^^^^^^^
+
+When a driver has control of a parallel port, it may allow another
+driver to temporarily ``borrow`` it. ``parport_yield`` does not block;
+``parport_yield_blocking`` may do.
+
+RETURN VALUE
+^^^^^^^^^^^^
+
+A return value of zero indicates that the caller still owns the port
+and the call did not block.
+
+A positive return value from ``parport_yield_blocking`` indicates that
+the caller still owns the port and the call blocked.
+
+A return value of -EAGAIN indicates that the caller no longer owns the
+port, and it must be re-claimed before use.
+
+ERRORS
+^^^^^^
+
+========= ==========================================================
+ -EAGAIN Ownership of the parallel port was given away.
+========= ==========================================================
+
+SEE ALSO
+^^^^^^^^
+
+parport_release
+
+
+
+parport_wait_peripheral - wait for status lines, up to 35ms
+-----------------------------------------------------------
+
+SYNOPSIS
+^^^^^^^^
+
+::
+
+ #include <linux/parport.h>
+
+ int parport_wait_peripheral (struct parport *port,
+ unsigned char mask,
+ unsigned char val);
+
+DESCRIPTION
+^^^^^^^^^^^
+
+Wait for the status lines in mask to match the values in val.
+
+RETURN VALUE
+^^^^^^^^^^^^
+
+======== ==========================================================
+ -EINTR a signal is pending
+ 0 the status lines in mask have values in val
+ 1 timed out while waiting (35ms elapsed)
+======== ==========================================================
+
+SEE ALSO
+^^^^^^^^
+
+parport_poll_peripheral
+
+
+
+parport_poll_peripheral - wait for status lines, in usec
+--------------------------------------------------------
+
+SYNOPSIS
+^^^^^^^^
+
+::
+
+ #include <linux/parport.h>
+
+ int parport_poll_peripheral (struct parport *port,
+ unsigned char mask,
+ unsigned char val,
+ int usec);
+
+DESCRIPTION
+^^^^^^^^^^^
+
+Wait for the status lines in mask to match the values in val.
+
+RETURN VALUE
+^^^^^^^^^^^^
+
+======== ==========================================================
+ -EINTR a signal is pending
+ 0 the status lines in mask have values in val
+ 1 timed out while waiting (usec microseconds have elapsed)
+======== ==========================================================
+
+SEE ALSO
+^^^^^^^^
+
+parport_wait_peripheral
+
+
+
+parport_wait_event - wait for an event on a port
+------------------------------------------------
+
+SYNOPSIS
+^^^^^^^^
+
+::
+
+ #include <linux/parport.h>
+
+ int parport_wait_event (struct parport *port, signed long timeout)
+
+DESCRIPTION
+^^^^^^^^^^^
+
+Wait for an event (e.g. interrupt) on a port. The timeout is in
+jiffies.
+
+RETURN VALUE
+^^^^^^^^^^^^
+
+======= ==========================================================
+ 0 success
+ <0 error (exit as soon as possible)
+ >0 timed out
+======= ==========================================================
+
+parport_negotiate - perform IEEE 1284 negotiation
+-------------------------------------------------
+
+SYNOPSIS
+^^^^^^^^
+
+::
+
+ #include <linux/parport.h>
+
+ int parport_negotiate (struct parport *, int mode);
+
+DESCRIPTION
+^^^^^^^^^^^
+
+Perform IEEE 1284 negotiation.
+
+RETURN VALUE
+^^^^^^^^^^^^
+
+======= ==========================================================
+ 0 handshake OK; IEEE 1284 peripheral and mode available
+ -1 handshake failed; peripheral not compliant (or none present)
+ 1 handshake OK; IEEE 1284 peripheral present but mode not
+ available
+======= ==========================================================
+
+SEE ALSO
+^^^^^^^^
+
+parport_read, parport_write
+
+
+
+parport_read - read data from device
+------------------------------------
+
+SYNOPSIS
+^^^^^^^^
+
+::
+
+ #include <linux/parport.h>
+
+ ssize_t parport_read (struct parport *, void *buf, size_t len);
+
+DESCRIPTION
+^^^^^^^^^^^
+
+Read data from device in current IEEE 1284 transfer mode. This only
+works for modes that support reverse data transfer.
+
+RETURN VALUE
+^^^^^^^^^^^^
+
+If negative, an error code; otherwise the number of bytes transferred.
+
+SEE ALSO
+^^^^^^^^
+
+parport_write, parport_negotiate
+
+
+
+parport_write - write data to device
+------------------------------------
+
+SYNOPSIS
+^^^^^^^^
+
+::
+
+ #include <linux/parport.h>
+
+ ssize_t parport_write (struct parport *, const void *buf, size_t len);
+
+DESCRIPTION
+^^^^^^^^^^^
+
+Write data to device in current IEEE 1284 transfer mode. This only
+works for modes that support forward data transfer.
+
+RETURN VALUE
+^^^^^^^^^^^^
+
+If negative, an error code; otherwise the number of bytes transferred.
+
+SEE ALSO
+^^^^^^^^
+
+parport_read, parport_negotiate
+
+
+
+parport_open - register device for particular device number
+-----------------------------------------------------------
+
+SYNOPSIS
+^^^^^^^^
+
+::
+
+ #include <linux/parport.h>
+
+ struct pardevice *parport_open (int devnum, const char *name,
+ int (*pf) (void *),
+ void (*kf) (void *),
+ void (*irqf) (int, void *,
+ struct pt_regs *),
+ int flags, void *handle);
+
+DESCRIPTION
+^^^^^^^^^^^
+
+This is like parport_register_device but takes a device number instead
+of a pointer to a struct parport.
+
+RETURN VALUE
+^^^^^^^^^^^^
+
+See parport_register_device. If no device is associated with devnum,
+NULL is returned.
+
+SEE ALSO
+^^^^^^^^
+
+parport_register_device
+
+
+
+parport_close - unregister device for particular device number
+--------------------------------------------------------------
+
+SYNOPSIS
+^^^^^^^^
+
+::
+
+ #include <linux/parport.h>
+
+ void parport_close (struct pardevice *dev);
+
+DESCRIPTION
+^^^^^^^^^^^
+
+This is the equivalent of parport_unregister_device for parport_open.
+
+SEE ALSO
+^^^^^^^^
+
+parport_unregister_device, parport_open
+
+
+
+parport_device_id - obtain IEEE 1284 Device ID
+----------------------------------------------
+
+SYNOPSIS
+^^^^^^^^
+
+::
+
+ #include <linux/parport.h>
+
+ ssize_t parport_device_id (int devnum, char *buffer, size_t len);
+
+DESCRIPTION
+^^^^^^^^^^^
+
+Obtains the IEEE 1284 Device ID associated with a given device.
+
+RETURN VALUE
+^^^^^^^^^^^^
+
+If negative, an error code; otherwise, the number of bytes of buffer
+that contain the device ID. The format of the device ID is as
+follows::
+
+ [length][ID]
+
+The first two bytes indicate the inclusive length of the entire Device
+ID, and are in big-endian order. The ID is a sequence of pairs of the
+form::
+
+ key:value;
+
+NOTES
+^^^^^
+
+Many devices have ill-formed IEEE 1284 Device IDs.
+
+SEE ALSO
+^^^^^^^^
+
+parport_find_class, parport_find_device
+
+
+
+parport_device_coords - convert device number to device coordinates
+-------------------------------------------------------------------
+
+SYNOPSIS
+^^^^^^^^
+
+::
+
+ #include <linux/parport.h>
+
+ int parport_device_coords (int devnum, int *parport, int *mux,
+ int *daisy);
+
+DESCRIPTION
+^^^^^^^^^^^
+
+Convert between device number (zero-based) and device coordinates
+(port, multiplexor, daisy chain address).
+
+RETURN VALUE
+^^^^^^^^^^^^
+
+Zero on success, in which case the coordinates are (``*parport``, ``*mux``,
+``*daisy``).
+
+SEE ALSO
+^^^^^^^^
+
+parport_open, parport_device_id
+
+
+
+parport_find_class - find a device by its class
+-----------------------------------------------
+
+SYNOPSIS
+^^^^^^^^
+
+::
+
+ #include <linux/parport.h>
+
+ typedef enum {
+ PARPORT_CLASS_LEGACY = 0, /* Non-IEEE1284 device */
+ PARPORT_CLASS_PRINTER,
+ PARPORT_CLASS_MODEM,
+ PARPORT_CLASS_NET,
+ PARPORT_CLASS_HDC, /* Hard disk controller */
+ PARPORT_CLASS_PCMCIA,
+ PARPORT_CLASS_MEDIA, /* Multimedia device */
+ PARPORT_CLASS_FDC, /* Floppy disk controller */
+ PARPORT_CLASS_PORTS,
+ PARPORT_CLASS_SCANNER,
+ PARPORT_CLASS_DIGCAM,
+ PARPORT_CLASS_OTHER, /* Anything else */
+ PARPORT_CLASS_UNSPEC, /* No CLS field in ID */
+ PARPORT_CLASS_SCSIADAPTER
+ } parport_device_class;
+
+ int parport_find_class (parport_device_class cls, int from);
+
+DESCRIPTION
+^^^^^^^^^^^
+
+Find a device by class. The search starts from device number from+1.
+
+RETURN VALUE
+^^^^^^^^^^^^
+
+The device number of the next device in that class, or -1 if no such
+device exists.
+
+NOTES
+^^^^^
+
+Example usage::
+
+ int devnum = -1;
+ while ((devnum = parport_find_class (PARPORT_CLASS_DIGCAM, devnum)) != -1) {
+ struct pardevice *dev = parport_open (devnum, ...);
+ ...
+ }
+
+SEE ALSO
+^^^^^^^^
+
+parport_find_device, parport_open, parport_device_id
+
+
+
+parport_find_device - find a device by its class
+------------------------------------------------
+
+SYNOPSIS
+^^^^^^^^
+
+::
+
+ #include <linux/parport.h>
+
+ int parport_find_device (const char *mfg, const char *mdl, int from);
+
+DESCRIPTION
+^^^^^^^^^^^
+
+Find a device by vendor and model. The search starts from device
+number from+1.
+
+RETURN VALUE
+^^^^^^^^^^^^
+
+The device number of the next device matching the specifications, or
+-1 if no such device exists.
+
+NOTES
+^^^^^
+
+Example usage::
+
+ int devnum = -1;
+ while ((devnum = parport_find_device ("IOMEGA", "ZIP+", devnum)) != -1) {
+ struct pardevice *dev = parport_open (devnum, ...);
+ ...
+ }
+
+SEE ALSO
+^^^^^^^^
+
+parport_find_class, parport_open, parport_device_id
+
+
+
+parport_set_timeout - set the inactivity timeout
+------------------------------------------------
+
+SYNOPSIS
+^^^^^^^^
+
+::
+
+ #include <linux/parport.h>
+
+ long parport_set_timeout (struct pardevice *dev, long inactivity);
+
+DESCRIPTION
+^^^^^^^^^^^
+
+Set the inactivity timeout, in jiffies, for a registered device. The
+previous timeout is returned.
+
+RETURN VALUE
+^^^^^^^^^^^^
+
+The previous timeout, in jiffies.
+
+NOTES
+^^^^^
+
+Some of the port->ops functions for a parport may take time, owing to
+delays at the peripheral. After the peripheral has not responded for
+``inactivity`` jiffies, a timeout will occur and the blocking function
+will return.
+
+A timeout of 0 jiffies is a special case: the function must do as much
+as it can without blocking or leaving the hardware in an unknown
+state. If port operations are performed from within an interrupt
+handler, for instance, a timeout of 0 jiffies should be used.
+
+Once set for a registered device, the timeout will remain at the set
+value until set again.
+
+SEE ALSO
+^^^^^^^^
+
+port->ops->xxx_read/write_yyy
+
+
+
+
+PORT FUNCTIONS
+==============
+
+The functions in the port->ops structure (struct parport_operations)
+are provided by the low-level driver responsible for that port.
+
+port->ops->read_data - read the data register
+---------------------------------------------
+
+SYNOPSIS
+^^^^^^^^
+
+::
+
+ #include <linux/parport.h>
+
+ struct parport_operations {
+ ...
+ unsigned char (*read_data) (struct parport *port);
+ ...
+ };
+
+DESCRIPTION
+^^^^^^^^^^^
+
+If port->modes contains the PARPORT_MODE_TRISTATE flag and the
+PARPORT_CONTROL_DIRECTION bit in the control register is set, this
+returns the value on the data pins. If port->modes contains the
+PARPORT_MODE_TRISTATE flag and the PARPORT_CONTROL_DIRECTION bit is
+not set, the return value _may_ be the last value written to the data
+register. Otherwise the return value is undefined.
+
+SEE ALSO
+^^^^^^^^
+
+write_data, read_status, write_control
+
+
+
+port->ops->write_data - write the data register
+-----------------------------------------------
+
+SYNOPSIS
+^^^^^^^^
+
+::
+
+ #include <linux/parport.h>
+
+ struct parport_operations {
+ ...
+ void (*write_data) (struct parport *port, unsigned char d);
+ ...
+ };
+
+DESCRIPTION
+^^^^^^^^^^^
+
+Writes to the data register. May have side-effects (a STROBE pulse,
+for instance).
+
+SEE ALSO
+^^^^^^^^
+
+read_data, read_status, write_control
+
+
+
+port->ops->read_status - read the status register
+-------------------------------------------------
+
+SYNOPSIS
+^^^^^^^^
+
+::
+
+ #include <linux/parport.h>
+
+ struct parport_operations {
+ ...
+ unsigned char (*read_status) (struct parport *port);
+ ...
+ };
+
+DESCRIPTION
+^^^^^^^^^^^
+
+Reads from the status register. This is a bitmask:
+
+- PARPORT_STATUS_ERROR (printer fault, "nFault")
+- PARPORT_STATUS_SELECT (on-line, "Select")
+- PARPORT_STATUS_PAPEROUT (no paper, "PError")
+- PARPORT_STATUS_ACK (handshake, "nAck")
+- PARPORT_STATUS_BUSY (busy, "Busy")
+
+There may be other bits set.
+
+SEE ALSO
+^^^^^^^^
+
+read_data, write_data, write_control
+
+
+
+port->ops->read_control - read the control register
+---------------------------------------------------
+
+SYNOPSIS
+^^^^^^^^
+
+::
+
+ #include <linux/parport.h>
+
+ struct parport_operations {
+ ...
+ unsigned char (*read_control) (struct parport *port);
+ ...
+ };
+
+DESCRIPTION
+^^^^^^^^^^^
+
+Returns the last value written to the control register (either from
+write_control or frob_control). No port access is performed.
+
+SEE ALSO
+^^^^^^^^
+
+read_data, write_data, read_status, write_control
+
+
+
+port->ops->write_control - write the control register
+-----------------------------------------------------
+
+SYNOPSIS
+^^^^^^^^
+
+::
+
+ #include <linux/parport.h>
+
+ struct parport_operations {
+ ...
+ void (*write_control) (struct parport *port, unsigned char s);
+ ...
+ };
+
+DESCRIPTION
+^^^^^^^^^^^
+
+Writes to the control register. This is a bitmask::
+
+ _______
+ - PARPORT_CONTROL_STROBE (nStrobe)
+ _______
+ - PARPORT_CONTROL_AUTOFD (nAutoFd)
+ _____
+ - PARPORT_CONTROL_INIT (nInit)
+ _________
+ - PARPORT_CONTROL_SELECT (nSelectIn)
+
+SEE ALSO
+^^^^^^^^
+
+read_data, write_data, read_status, frob_control
+
+
+
+port->ops->frob_control - write control register bits
+-----------------------------------------------------
+
+SYNOPSIS
+^^^^^^^^
+
+::
+
+ #include <linux/parport.h>
+
+ struct parport_operations {
+ ...
+ unsigned char (*frob_control) (struct parport *port,
+ unsigned char mask,
+ unsigned char val);
+ ...
+ };
+
+DESCRIPTION
+^^^^^^^^^^^
+
+This is equivalent to reading from the control register, masking out
+the bits in mask, exclusive-or'ing with the bits in val, and writing
+the result to the control register.
+
+As some ports don't allow reads from the control port, a software copy
+of its contents is maintained, so frob_control is in fact only one
+port access.
+
+SEE ALSO
+^^^^^^^^
+
+read_data, write_data, read_status, write_control
+
+
+
+port->ops->enable_irq - enable interrupt generation
+---------------------------------------------------
+
+SYNOPSIS
+^^^^^^^^
+
+::
+
+ #include <linux/parport.h>
+
+ struct parport_operations {
+ ...
+ void (*enable_irq) (struct parport *port);
+ ...
+ };
+
+DESCRIPTION
+^^^^^^^^^^^
+
+The parallel port hardware is instructed to generate interrupts at
+appropriate moments, although those moments are
+architecture-specific. For the PC architecture, interrupts are
+commonly generated on the rising edge of nAck.
+
+SEE ALSO
+^^^^^^^^
+
+disable_irq
+
+
+
+port->ops->disable_irq - disable interrupt generation
+-----------------------------------------------------
+
+SYNOPSIS
+^^^^^^^^
+
+::
+
+ #include <linux/parport.h>
+
+ struct parport_operations {
+ ...
+ void (*disable_irq) (struct parport *port);
+ ...
+ };
+
+DESCRIPTION
+^^^^^^^^^^^
+
+The parallel port hardware is instructed not to generate interrupts.
+The interrupt itself is not masked.
+
+SEE ALSO
+^^^^^^^^
+
+enable_irq
+
+
+
+port->ops->data_forward - enable data drivers
+---------------------------------------------
+
+SYNOPSIS
+^^^^^^^^
+
+::
+
+ #include <linux/parport.h>
+
+ struct parport_operations {
+ ...
+ void (*data_forward) (struct parport *port);
+ ...
+ };
+
+DESCRIPTION
+^^^^^^^^^^^
+
+Enables the data line drivers, for 8-bit host-to-peripheral
+communications.
+
+SEE ALSO
+^^^^^^^^
+
+data_reverse
+
+
+
+port->ops->data_reverse - tristate the buffer
+---------------------------------------------
+
+SYNOPSIS
+^^^^^^^^
+
+::
+
+ #include <linux/parport.h>
+
+ struct parport_operations {
+ ...
+ void (*data_reverse) (struct parport *port);
+ ...
+ };
+
+DESCRIPTION
+^^^^^^^^^^^
+
+Places the data bus in a high impedance state, if port->modes has the
+PARPORT_MODE_TRISTATE bit set.
+
+SEE ALSO
+^^^^^^^^
+
+data_forward
+
+
+
+port->ops->epp_write_data - write EPP data
+------------------------------------------
+
+SYNOPSIS
+^^^^^^^^
+
+::
+
+ #include <linux/parport.h>
+
+ struct parport_operations {
+ ...
+ size_t (*epp_write_data) (struct parport *port, const void *buf,
+ size_t len, int flags);
+ ...
+ };
+
+DESCRIPTION
+^^^^^^^^^^^
+
+Writes data in EPP mode, and returns the number of bytes written.
+
+The ``flags`` parameter may be one or more of the following,
+bitwise-or'ed together:
+
+======================= =================================================
+PARPORT_EPP_FAST Use fast transfers. Some chips provide 16-bit and
+ 32-bit registers. However, if a transfer
+ times out, the return value may be unreliable.
+======================= =================================================
+
+SEE ALSO
+^^^^^^^^
+
+epp_read_data, epp_write_addr, epp_read_addr
+
+
+
+port->ops->epp_read_data - read EPP data
+----------------------------------------
+
+SYNOPSIS
+^^^^^^^^
+
+::
+
+ #include <linux/parport.h>
+
+ struct parport_operations {
+ ...
+ size_t (*epp_read_data) (struct parport *port, void *buf,
+ size_t len, int flags);
+ ...
+ };
+
+DESCRIPTION
+^^^^^^^^^^^
+
+Reads data in EPP mode, and returns the number of bytes read.
+
+The ``flags`` parameter may be one or more of the following,
+bitwise-or'ed together:
+
+======================= =================================================
+PARPORT_EPP_FAST Use fast transfers. Some chips provide 16-bit and
+ 32-bit registers. However, if a transfer
+ times out, the return value may be unreliable.
+======================= =================================================
+
+SEE ALSO
+^^^^^^^^
+
+epp_write_data, epp_write_addr, epp_read_addr
+
+
+
+port->ops->epp_write_addr - write EPP address
+---------------------------------------------
+
+SYNOPSIS
+^^^^^^^^
+
+::
+
+ #include <linux/parport.h>
+
+ struct parport_operations {
+ ...
+ size_t (*epp_write_addr) (struct parport *port,
+ const void *buf, size_t len, int flags);
+ ...
+ };
+
+DESCRIPTION
+^^^^^^^^^^^
+
+Writes EPP addresses (8 bits each), and returns the number written.
+
+The ``flags`` parameter may be one or more of the following,
+bitwise-or'ed together:
+
+======================= =================================================
+PARPORT_EPP_FAST Use fast transfers. Some chips provide 16-bit and
+ 32-bit registers. However, if a transfer
+ times out, the return value may be unreliable.
+======================= =================================================
+
+(Does PARPORT_EPP_FAST make sense for this function?)
+
+SEE ALSO
+^^^^^^^^
+
+epp_write_data, epp_read_data, epp_read_addr
+
+
+
+port->ops->epp_read_addr - read EPP address
+-------------------------------------------
+
+SYNOPSIS
+^^^^^^^^
+
+::
+
+ #include <linux/parport.h>
+
+ struct parport_operations {
+ ...
+ size_t (*epp_read_addr) (struct parport *port, void *buf,
+ size_t len, int flags);
+ ...
+ };
+
+DESCRIPTION
+^^^^^^^^^^^
+
+Reads EPP addresses (8 bits each), and returns the number read.
+
+The ``flags`` parameter may be one or more of the following,
+bitwise-or'ed together:
+
+======================= =================================================
+PARPORT_EPP_FAST Use fast transfers. Some chips provide 16-bit and
+ 32-bit registers. However, if a transfer
+ times out, the return value may be unreliable.
+======================= =================================================
+
+(Does PARPORT_EPP_FAST make sense for this function?)
+
+SEE ALSO
+^^^^^^^^
+
+epp_write_data, epp_read_data, epp_write_addr
+
+
+
+port->ops->ecp_write_data - write a block of ECP data
+-----------------------------------------------------
+
+SYNOPSIS
+^^^^^^^^
+
+::
+
+ #include <linux/parport.h>
+
+ struct parport_operations {
+ ...
+ size_t (*ecp_write_data) (struct parport *port,
+ const void *buf, size_t len, int flags);
+ ...
+ };
+
+DESCRIPTION
+^^^^^^^^^^^
+
+Writes a block of ECP data. The ``flags`` parameter is ignored.
+
+RETURN VALUE
+^^^^^^^^^^^^
+
+The number of bytes written.
+
+SEE ALSO
+^^^^^^^^
+
+ecp_read_data, ecp_write_addr
+
+
+
+port->ops->ecp_read_data - read a block of ECP data
+---------------------------------------------------
+
+SYNOPSIS
+^^^^^^^^
+
+::
+
+ #include <linux/parport.h>
+
+ struct parport_operations {
+ ...
+ size_t (*ecp_read_data) (struct parport *port,
+ void *buf, size_t len, int flags);
+ ...
+ };
+
+DESCRIPTION
+^^^^^^^^^^^
+
+Reads a block of ECP data. The ``flags`` parameter is ignored.
+
+RETURN VALUE
+^^^^^^^^^^^^
+
+The number of bytes read. NB. There may be more unread data in a
+FIFO. Is there a way of stunning the FIFO to prevent this?
+
+SEE ALSO
+^^^^^^^^
+
+ecp_write_block, ecp_write_addr
+
+
+
+port->ops->ecp_write_addr - write a block of ECP addresses
+----------------------------------------------------------
+
+SYNOPSIS
+^^^^^^^^
+
+::
+
+ #include <linux/parport.h>
+
+ struct parport_operations {
+ ...
+ size_t (*ecp_write_addr) (struct parport *port,
+ const void *buf, size_t len, int flags);
+ ...
+ };
+
+DESCRIPTION
+^^^^^^^^^^^
+
+Writes a block of ECP addresses. The ``flags`` parameter is ignored.
+
+RETURN VALUE
+^^^^^^^^^^^^
+
+The number of bytes written.
+
+NOTES
+^^^^^
+
+This may use a FIFO, and if so shall not return until the FIFO is empty.
+
+SEE ALSO
+^^^^^^^^
+
+ecp_read_data, ecp_write_data
+
+
+
+port->ops->nibble_read_data - read a block of data in nibble mode
+-----------------------------------------------------------------
+
+SYNOPSIS
+^^^^^^^^
+
+::
+
+ #include <linux/parport.h>
+
+ struct parport_operations {
+ ...
+ size_t (*nibble_read_data) (struct parport *port,
+ void *buf, size_t len, int flags);
+ ...
+ };
+
+DESCRIPTION
+^^^^^^^^^^^
+
+Reads a block of data in nibble mode. The ``flags`` parameter is ignored.
+
+RETURN VALUE
+^^^^^^^^^^^^
+
+The number of whole bytes read.
+
+SEE ALSO
+^^^^^^^^
+
+byte_read_data, compat_write_data
+
+
+
+port->ops->byte_read_data - read a block of data in byte mode
+-------------------------------------------------------------
+
+SYNOPSIS
+^^^^^^^^
+
+::
+
+ #include <linux/parport.h>
+
+ struct parport_operations {
+ ...
+ size_t (*byte_read_data) (struct parport *port,
+ void *buf, size_t len, int flags);
+ ...
+ };
+
+DESCRIPTION
+^^^^^^^^^^^
+
+Reads a block of data in byte mode. The ``flags`` parameter is ignored.
+
+RETURN VALUE
+^^^^^^^^^^^^
+
+The number of bytes read.
+
+SEE ALSO
+^^^^^^^^
+
+nibble_read_data, compat_write_data
+
+
+
+port->ops->compat_write_data - write a block of data in compatibility mode
+--------------------------------------------------------------------------
+
+SYNOPSIS
+^^^^^^^^
+
+::
+
+ #include <linux/parport.h>
+
+ struct parport_operations {
+ ...
+ size_t (*compat_write_data) (struct parport *port,
+ const void *buf, size_t len, int flags);
+ ...
+ };
+
+DESCRIPTION
+^^^^^^^^^^^
+
+Writes a block of data in compatibility mode. The ``flags`` parameter
+is ignored.
+
+RETURN VALUE
+^^^^^^^^^^^^
+
+The number of bytes written.
+
+SEE ALSO
+^^^^^^^^
+
+nibble_read_data, byte_read_data
diff --git a/Documentation/driver-api/phy/index.rst b/Documentation/driver-api/phy/index.rst
new file mode 100644
index 000000000000..69ba1216de72
--- /dev/null
+++ b/Documentation/driver-api/phy/index.rst
@@ -0,0 +1,18 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=====================
+Generic PHY Framework
+=====================
+
+.. toctree::
+
+ phy
+ samsung-usb2
+
+.. only:: subproject and html
+
+ Indices
+ =======
+
+ * :ref:`genindex`
+
diff --git a/Documentation/driver-api/phy/phy.rst b/Documentation/driver-api/phy/phy.rst
new file mode 100644
index 000000000000..457c3e0f86d6
--- /dev/null
+++ b/Documentation/driver-api/phy/phy.rst
@@ -0,0 +1,197 @@
+=============
+PHY subsystem
+=============
+
+:Author: Kishon Vijay Abraham I <kishon@ti.com>
+
+This document explains the Generic PHY Framework along with the APIs provided,
+and how-to-use.
+
+Introduction
+============
+
+*PHY* is the abbreviation for physical layer. It is used to connect a device
+to the physical medium e.g., the USB controller has a PHY to provide functions
+such as serialization, de-serialization, encoding, decoding and is responsible
+for obtaining the required data transmission rate. Note that some USB
+controllers have PHY functionality embedded into it and others use an external
+PHY. Other peripherals that use PHY include Wireless LAN, Ethernet,
+SATA etc.
+
+The intention of creating this framework is to bring the PHY drivers spread
+all over the Linux kernel to drivers/phy to increase code re-use and for
+better code maintainability.
+
+This framework will be of use only to devices that use external PHY (PHY
+functionality is not embedded within the controller).
+
+Registering/Unregistering the PHY provider
+==========================================
+
+PHY provider refers to an entity that implements one or more PHY instances.
+For the simple case where the PHY provider implements only a single instance of
+the PHY, the framework provides its own implementation of of_xlate in
+of_phy_simple_xlate. If the PHY provider implements multiple instances, it
+should provide its own implementation of of_xlate. of_xlate is used only for
+dt boot case.
+
+::
+
+ #define of_phy_provider_register(dev, xlate) \
+ __of_phy_provider_register((dev), NULL, THIS_MODULE, (xlate))
+
+ #define devm_of_phy_provider_register(dev, xlate) \
+ __devm_of_phy_provider_register((dev), NULL, THIS_MODULE,
+ (xlate))
+
+of_phy_provider_register and devm_of_phy_provider_register macros can be used to
+register the phy_provider and it takes device and of_xlate as
+arguments. For the dt boot case, all PHY providers should use one of the above
+2 macros to register the PHY provider.
+
+Often the device tree nodes associated with a PHY provider will contain a set
+of children that each represent a single PHY. Some bindings may nest the child
+nodes within extra levels for context and extensibility, in which case the low
+level of_phy_provider_register_full() and devm_of_phy_provider_register_full()
+macros can be used to override the node containing the children.
+
+::
+
+ #define of_phy_provider_register_full(dev, children, xlate) \
+ __of_phy_provider_register(dev, children, THIS_MODULE, xlate)
+
+ #define devm_of_phy_provider_register_full(dev, children, xlate) \
+ __devm_of_phy_provider_register_full(dev, children,
+ THIS_MODULE, xlate)
+
+ void devm_of_phy_provider_unregister(struct device *dev,
+ struct phy_provider *phy_provider);
+ void of_phy_provider_unregister(struct phy_provider *phy_provider);
+
+devm_of_phy_provider_unregister and of_phy_provider_unregister can be used to
+unregister the PHY.
+
+Creating the PHY
+================
+
+The PHY driver should create the PHY in order for other peripheral controllers
+to make use of it. The PHY framework provides 2 APIs to create the PHY.
+
+::
+
+ struct phy *phy_create(struct device *dev, struct device_node *node,
+ const struct phy_ops *ops);
+ struct phy *devm_phy_create(struct device *dev,
+ struct device_node *node,
+ const struct phy_ops *ops);
+
+The PHY drivers can use one of the above 2 APIs to create the PHY by passing
+the device pointer and phy ops.
+phy_ops is a set of function pointers for performing PHY operations such as
+init, exit, power_on and power_off.
+
+Inorder to dereference the private data (in phy_ops), the phy provider driver
+can use phy_set_drvdata() after creating the PHY and use phy_get_drvdata() in
+phy_ops to get back the private data.
+
+4. Getting a reference to the PHY
+
+Before the controller can make use of the PHY, it has to get a reference to
+it. This framework provides the following APIs to get a reference to the PHY.
+
+::
+
+ struct phy *phy_get(struct device *dev, const char *string);
+ struct phy *phy_optional_get(struct device *dev, const char *string);
+ struct phy *devm_phy_get(struct device *dev, const char *string);
+ struct phy *devm_phy_optional_get(struct device *dev,
+ const char *string);
+ struct phy *devm_of_phy_get_by_index(struct device *dev,
+ struct device_node *np,
+ int index);
+
+phy_get, phy_optional_get, devm_phy_get and devm_phy_optional_get can
+be used to get the PHY. In the case of dt boot, the string arguments
+should contain the phy name as given in the dt data and in the case of
+non-dt boot, it should contain the label of the PHY. The two
+devm_phy_get associates the device with the PHY using devres on
+successful PHY get. On driver detach, release function is invoked on
+the devres data and devres data is freed. phy_optional_get and
+devm_phy_optional_get should be used when the phy is optional. These
+two functions will never return -ENODEV, but instead returns NULL when
+the phy cannot be found.Some generic drivers, such as ehci, may use multiple
+phys and for such drivers referencing phy(s) by name(s) does not make sense. In
+this case, devm_of_phy_get_by_index can be used to get a phy reference based on
+the index.
+
+It should be noted that NULL is a valid phy reference. All phy
+consumer calls on the NULL phy become NOPs. That is the release calls,
+the phy_init() and phy_exit() calls, and phy_power_on() and
+phy_power_off() calls are all NOP when applied to a NULL phy. The NULL
+phy is useful in devices for handling optional phy devices.
+
+Releasing a reference to the PHY
+================================
+
+When the controller no longer needs the PHY, it has to release the reference
+to the PHY it has obtained using the APIs mentioned in the above section. The
+PHY framework provides 2 APIs to release a reference to the PHY.
+
+::
+
+ void phy_put(struct phy *phy);
+ void devm_phy_put(struct device *dev, struct phy *phy);
+
+Both these APIs are used to release a reference to the PHY and devm_phy_put
+destroys the devres associated with this PHY.
+
+Destroying the PHY
+==================
+
+When the driver that created the PHY is unloaded, it should destroy the PHY it
+created using one of the following 2 APIs::
+
+ void phy_destroy(struct phy *phy);
+ void devm_phy_destroy(struct device *dev, struct phy *phy);
+
+Both these APIs destroy the PHY and devm_phy_destroy destroys the devres
+associated with this PHY.
+
+PM Runtime
+==========
+
+This subsystem is pm runtime enabled. So while creating the PHY,
+pm_runtime_enable of the phy device created by this subsystem is called and
+while destroying the PHY, pm_runtime_disable is called. Note that the phy
+device created by this subsystem will be a child of the device that calls
+phy_create (PHY provider device).
+
+So pm_runtime_get_sync of the phy_device created by this subsystem will invoke
+pm_runtime_get_sync of PHY provider device because of parent-child relationship.
+It should also be noted that phy_power_on and phy_power_off performs
+phy_pm_runtime_get_sync and phy_pm_runtime_put respectively.
+There are exported APIs like phy_pm_runtime_get, phy_pm_runtime_get_sync,
+phy_pm_runtime_put, phy_pm_runtime_put_sync, phy_pm_runtime_allow and
+phy_pm_runtime_forbid for performing PM operations.
+
+PHY Mappings
+============
+
+In order to get reference to a PHY without help from DeviceTree, the framework
+offers lookups which can be compared to clkdev that allow clk structures to be
+bound to devices. A lookup can be made be made during runtime when a handle to
+the struct phy already exists.
+
+The framework offers the following API for registering and unregistering the
+lookups::
+
+ int phy_create_lookup(struct phy *phy, const char *con_id,
+ const char *dev_id);
+ void phy_remove_lookup(struct phy *phy, const char *con_id,
+ const char *dev_id);
+
+DeviceTree Binding
+==================
+
+The documentation for PHY dt binding can be found @
+Documentation/devicetree/bindings/phy/phy-bindings.txt
diff --git a/Documentation/driver-api/phy/samsung-usb2.rst b/Documentation/driver-api/phy/samsung-usb2.rst
new file mode 100644
index 000000000000..c48c8b9797b9
--- /dev/null
+++ b/Documentation/driver-api/phy/samsung-usb2.rst
@@ -0,0 +1,137 @@
+====================================
+Samsung USB 2.0 PHY adaptation layer
+====================================
+
+1. Description
+--------------
+
+The architecture of the USB 2.0 PHY module in Samsung SoCs is similar
+among many SoCs. In spite of the similarities it proved difficult to
+create a one driver that would fit all these PHY controllers. Often
+the differences were minor and were found in particular bits of the
+registers of the PHY. In some rare cases the order of register writes or
+the PHY powering up process had to be altered. This adaptation layer is
+a compromise between having separate drivers and having a single driver
+with added support for many special cases.
+
+2. Files description
+--------------------
+
+- phy-samsung-usb2.c
+ This is the main file of the adaptation layer. This file contains
+ the probe function and provides two callbacks to the Generic PHY
+ Framework. This two callbacks are used to power on and power off the
+ phy. They carry out the common work that has to be done on all version
+ of the PHY module. Depending on which SoC was chosen they execute SoC
+ specific callbacks. The specific SoC version is selected by choosing
+ the appropriate compatible string. In addition, this file contains
+ struct of_device_id definitions for particular SoCs.
+
+- phy-samsung-usb2.h
+ This is the include file. It declares the structures used by this
+ driver. In addition it should contain extern declarations for
+ structures that describe particular SoCs.
+
+3. Supporting SoCs
+------------------
+
+To support a new SoC a new file should be added to the drivers/phy
+directory. Each SoC's configuration is stored in an instance of the
+struct samsung_usb2_phy_config::
+
+ struct samsung_usb2_phy_config {
+ const struct samsung_usb2_common_phy *phys;
+ int (*rate_to_clk)(unsigned long, u32 *);
+ unsigned int num_phys;
+ bool has_mode_switch;
+ };
+
+The num_phys is the number of phys handled by the driver. `*phys` is an
+array that contains the configuration for each phy. The has_mode_switch
+property is a boolean flag that determines whether the SoC has USB host
+and device on a single pair of pins. If so, a special register has to
+be modified to change the internal routing of these pins between a USB
+device or host module.
+
+For example the configuration for Exynos 4210 is following::
+
+ const struct samsung_usb2_phy_config exynos4210_usb2_phy_config = {
+ .has_mode_switch = 0,
+ .num_phys = EXYNOS4210_NUM_PHYS,
+ .phys = exynos4210_phys,
+ .rate_to_clk = exynos4210_rate_to_clk,
+ }
+
+- `int (*rate_to_clk)(unsigned long, u32 *)`
+
+ The rate_to_clk callback is to convert the rate of the clock
+ used as the reference clock for the PHY module to the value
+ that should be written in the hardware register.
+
+The exynos4210_phys configuration array is as follows::
+
+ static const struct samsung_usb2_common_phy exynos4210_phys[] = {
+ {
+ .label = "device",
+ .id = EXYNOS4210_DEVICE,
+ .power_on = exynos4210_power_on,
+ .power_off = exynos4210_power_off,
+ },
+ {
+ .label = "host",
+ .id = EXYNOS4210_HOST,
+ .power_on = exynos4210_power_on,
+ .power_off = exynos4210_power_off,
+ },
+ {
+ .label = "hsic0",
+ .id = EXYNOS4210_HSIC0,
+ .power_on = exynos4210_power_on,
+ .power_off = exynos4210_power_off,
+ },
+ {
+ .label = "hsic1",
+ .id = EXYNOS4210_HSIC1,
+ .power_on = exynos4210_power_on,
+ .power_off = exynos4210_power_off,
+ },
+ {},
+ };
+
+- `int (*power_on)(struct samsung_usb2_phy_instance *);`
+ `int (*power_off)(struct samsung_usb2_phy_instance *);`
+
+ These two callbacks are used to power on and power off the phy
+ by modifying appropriate registers.
+
+Final change to the driver is adding appropriate compatible value to the
+phy-samsung-usb2.c file. In case of Exynos 4210 the following lines were
+added to the struct of_device_id samsung_usb2_phy_of_match[] array::
+
+ #ifdef CONFIG_PHY_EXYNOS4210_USB2
+ {
+ .compatible = "samsung,exynos4210-usb2-phy",
+ .data = &exynos4210_usb2_phy_config,
+ },
+ #endif
+
+To add further flexibility to the driver the Kconfig file enables to
+include support for selected SoCs in the compiled driver. The Kconfig
+entry for Exynos 4210 is following::
+
+ config PHY_EXYNOS4210_USB2
+ bool "Support for Exynos 4210"
+ depends on PHY_SAMSUNG_USB2
+ depends on CPU_EXYNOS4210
+ help
+ Enable USB PHY support for Exynos 4210. This option requires that
+ Samsung USB 2.0 PHY driver is enabled and means that support for this
+ particular SoC is compiled in the driver. In case of Exynos 4210 four
+ phys are available - device, host, HSCI0 and HSCI1.
+
+The newly created file that supports the new SoC has to be also added to the
+Makefile. In case of Exynos 4210 the added line is following::
+
+ obj-$(CONFIG_PHY_EXYNOS4210_USB2) += phy-exynos4210-usb2.o
+
+After completing these steps the support for the new SoC should be ready.
diff --git a/Documentation/driver-api/pps.rst b/Documentation/driver-api/pps.rst
index 1456d2c32ebd..2d6b99766ee8 100644
--- a/Documentation/driver-api/pps.rst
+++ b/Documentation/driver-api/pps.rst
@@ -1,4 +1,4 @@
-:orphan:
+.. SPDX-License-Identifier: GPL-2.0
======================
PPS - Pulse Per Second
diff --git a/Documentation/driver-api/pti_intel_mid.rst b/Documentation/driver-api/pti_intel_mid.rst
new file mode 100644
index 000000000000..20f1cff42d5f
--- /dev/null
+++ b/Documentation/driver-api/pti_intel_mid.rst
@@ -0,0 +1,106 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=============
+Intel MID PTI
+=============
+
+The Intel MID PTI project is HW implemented in Intel Atom
+system-on-a-chip designs based on the Parallel Trace
+Interface for MIPI P1149.7 cJTAG standard. The kernel solution
+for this platform involves the following files::
+
+ ./include/linux/pti.h
+ ./drivers/.../n_tracesink.h
+ ./drivers/.../n_tracerouter.c
+ ./drivers/.../n_tracesink.c
+ ./drivers/.../pti.c
+
+pti.c is the driver that enables various debugging features
+popular on platforms from certain mobile manufacturers.
+n_tracerouter.c and n_tracesink.c allow extra system information to
+be collected and routed to the pti driver, such as trace
+debugging data from a modem. Although n_tracerouter
+and n_tracesink are a part of the complete PTI solution,
+these two line disciplines can work separately from
+pti.c and route any data stream from one /dev/tty node
+to another /dev/tty node via kernel-space. This provides
+a stable, reliable connection that will not break unless
+the user-space application shuts down (plus avoids
+kernel->user->kernel context switch overheads of routing
+data).
+
+An example debugging usage for this driver system:
+
+ * Hook /dev/ttyPTI0 to syslogd. Opening this port will also start
+ a console device to further capture debugging messages to PTI.
+ * Hook /dev/ttyPTI1 to modem debugging data to write to PTI HW.
+ This is where n_tracerouter and n_tracesink are used.
+ * Hook /dev/pti to a user-level debugging application for writing
+ to PTI HW.
+ * `Use mipi_` Kernel Driver API in other device drivers for
+ debugging to PTI by first requesting a PTI write address via
+ mipi_request_masterchannel(1).
+
+Below is example pseudo-code on how a 'privileged' application
+can hook up n_tracerouter and n_tracesink to any tty on
+a system. 'Privileged' means the application has enough
+privileges to successfully manipulate the ldisc drivers
+but is not just blindly executing as 'root'. Keep in mind
+the use of ioctl(,TIOCSETD,) is not specific to the n_tracerouter
+and n_tracesink line discpline drivers but is a generic
+operation for a program to use a line discpline driver
+on a tty port other than the default n_tty::
+
+ /////////// To hook up n_tracerouter and n_tracesink /////////
+
+ // Note that n_tracerouter depends on n_tracesink.
+ #include <errno.h>
+ #define ONE_TTY "/dev/ttyOne"
+ #define TWO_TTY "/dev/ttyTwo"
+
+ // needed global to hand onto ldisc connection
+ static int g_fd_source = -1;
+ static int g_fd_sink = -1;
+
+ // these two vars used to grab LDISC values from loaded ldisc drivers
+ // in OS. Look at /proc/tty/ldiscs to get the right numbers from
+ // the ldiscs loaded in the system.
+ int source_ldisc_num, sink_ldisc_num = -1;
+ int retval;
+
+ g_fd_source = open(ONE_TTY, O_RDWR); // must be R/W
+ g_fd_sink = open(TWO_TTY, O_RDWR); // must be R/W
+
+ if (g_fd_source <= 0) || (g_fd_sink <= 0) {
+ // doubt you'll want to use these exact error lines of code
+ printf("Error on open(). errno: %d\n",errno);
+ return errno;
+ }
+
+ retval = ioctl(g_fd_sink, TIOCSETD, &sink_ldisc_num);
+ if (retval < 0) {
+ printf("Error on ioctl(). errno: %d\n", errno);
+ return errno;
+ }
+
+ retval = ioctl(g_fd_source, TIOCSETD, &source_ldisc_num);
+ if (retval < 0) {
+ printf("Error on ioctl(). errno: %d\n", errno);
+ return errno;
+ }
+
+ /////////// To disconnect n_tracerouter and n_tracesink ////////
+
+ // First make sure data through the ldiscs has stopped.
+
+ // Second, disconnect ldiscs. This provides a
+ // little cleaner shutdown on tty stack.
+ sink_ldisc_num = 0;
+ source_ldisc_num = 0;
+ ioctl(g_fd_uart, TIOCSETD, &sink_ldisc_num);
+ ioctl(g_fd_gadget, TIOCSETD, &source_ldisc_num);
+
+ // Three, program closes connection, and cleanup:
+ close(g_fd_uart);
+ close(g_fd_gadget);
+ g_fd_uart = g_fd_gadget = NULL;
diff --git a/Documentation/driver-api/ptp.rst b/Documentation/driver-api/ptp.rst
index b6e65d66d37a..a15192e32347 100644
--- a/Documentation/driver-api/ptp.rst
+++ b/Documentation/driver-api/ptp.rst
@@ -1,4 +1,4 @@
-:orphan:
+.. SPDX-License-Identifier: GPL-2.0
===========================================
PTP hardware clock infrastructure for Linux
diff --git a/Documentation/driver-api/pwm.rst b/Documentation/driver-api/pwm.rst
new file mode 100644
index 000000000000..ab62f1bb0366
--- /dev/null
+++ b/Documentation/driver-api/pwm.rst
@@ -0,0 +1,165 @@
+======================================
+Pulse Width Modulation (PWM) interface
+======================================
+
+This provides an overview about the Linux PWM interface
+
+PWMs are commonly used for controlling LEDs, fans or vibrators in
+cell phones. PWMs with a fixed purpose have no need implementing
+the Linux PWM API (although they could). However, PWMs are often
+found as discrete devices on SoCs which have no fixed purpose. It's
+up to the board designer to connect them to LEDs or fans. To provide
+this kind of flexibility the generic PWM API exists.
+
+Identifying PWMs
+----------------
+
+Users of the legacy PWM API use unique IDs to refer to PWM devices.
+
+Instead of referring to a PWM device via its unique ID, board setup code
+should instead register a static mapping that can be used to match PWM
+consumers to providers, as given in the following example::
+
+ static struct pwm_lookup board_pwm_lookup[] = {
+ PWM_LOOKUP("tegra-pwm", 0, "pwm-backlight", NULL,
+ 50000, PWM_POLARITY_NORMAL),
+ };
+
+ static void __init board_init(void)
+ {
+ ...
+ pwm_add_table(board_pwm_lookup, ARRAY_SIZE(board_pwm_lookup));
+ ...
+ }
+
+Using PWMs
+----------
+
+Legacy users can request a PWM device using pwm_request() and free it
+after usage with pwm_free().
+
+New users should use the pwm_get() function and pass to it the consumer
+device or a consumer name. pwm_put() is used to free the PWM device. Managed
+variants of these functions, devm_pwm_get() and devm_pwm_put(), also exist.
+
+After being requested, a PWM has to be configured using::
+
+ int pwm_apply_state(struct pwm_device *pwm, struct pwm_state *state);
+
+This API controls both the PWM period/duty_cycle config and the
+enable/disable state.
+
+The pwm_config(), pwm_enable() and pwm_disable() functions are just wrappers
+around pwm_apply_state() and should not be used if the user wants to change
+several parameter at once. For example, if you see pwm_config() and
+pwm_{enable,disable}() calls in the same function, this probably means you
+should switch to pwm_apply_state().
+
+The PWM user API also allows one to query the PWM state with pwm_get_state().
+
+In addition to the PWM state, the PWM API also exposes PWM arguments, which
+are the reference PWM config one should use on this PWM.
+PWM arguments are usually platform-specific and allows the PWM user to only
+care about dutycycle relatively to the full period (like, duty = 50% of the
+period). struct pwm_args contains 2 fields (period and polarity) and should
+be used to set the initial PWM config (usually done in the probe function
+of the PWM user). PWM arguments are retrieved with pwm_get_args().
+
+All consumers should really be reconfiguring the PWM upon resume as
+appropriate. This is the only way to ensure that everything is resumed in
+the proper order.
+
+Using PWMs with the sysfs interface
+-----------------------------------
+
+If CONFIG_SYSFS is enabled in your kernel configuration a simple sysfs
+interface is provided to use the PWMs from userspace. It is exposed at
+/sys/class/pwm/. Each probed PWM controller/chip will be exported as
+pwmchipN, where N is the base of the PWM chip. Inside the directory you
+will find:
+
+ npwm
+ The number of PWM channels this chip supports (read-only).
+
+ export
+ Exports a PWM channel for use with sysfs (write-only).
+
+ unexport
+ Unexports a PWM channel from sysfs (write-only).
+
+The PWM channels are numbered using a per-chip index from 0 to npwm-1.
+
+When a PWM channel is exported a pwmX directory will be created in the
+pwmchipN directory it is associated with, where X is the number of the
+channel that was exported. The following properties will then be available:
+
+ period
+ The total period of the PWM signal (read/write).
+ Value is in nanoseconds and is the sum of the active and inactive
+ time of the PWM.
+
+ duty_cycle
+ The active time of the PWM signal (read/write).
+ Value is in nanoseconds and must be less than the period.
+
+ polarity
+ Changes the polarity of the PWM signal (read/write).
+ Writes to this property only work if the PWM chip supports changing
+ the polarity. The polarity can only be changed if the PWM is not
+ enabled. Value is the string "normal" or "inversed".
+
+ enable
+ Enable/disable the PWM signal (read/write).
+
+ - 0 - disabled
+ - 1 - enabled
+
+Implementing a PWM driver
+-------------------------
+
+Currently there are two ways to implement pwm drivers. Traditionally
+there only has been the barebone API meaning that each driver has
+to implement the pwm_*() functions itself. This means that it's impossible
+to have multiple PWM drivers in the system. For this reason it's mandatory
+for new drivers to use the generic PWM framework.
+
+A new PWM controller/chip can be added using pwmchip_add() and removed
+again with pwmchip_remove(). pwmchip_add() takes a filled in struct
+pwm_chip as argument which provides a description of the PWM chip, the
+number of PWM devices provided by the chip and the chip-specific
+implementation of the supported PWM operations to the framework.
+
+When implementing polarity support in a PWM driver, make sure to respect the
+signal conventions in the PWM framework. By definition, normal polarity
+characterizes a signal starts high for the duration of the duty cycle and
+goes low for the remainder of the period. Conversely, a signal with inversed
+polarity starts low for the duration of the duty cycle and goes high for the
+remainder of the period.
+
+Drivers are encouraged to implement ->apply() instead of the legacy
+->enable(), ->disable() and ->config() methods. Doing that should provide
+atomicity in the PWM config workflow, which is required when the PWM controls
+a critical device (like a regulator).
+
+The implementation of ->get_state() (a method used to retrieve initial PWM
+state) is also encouraged for the same reason: letting the PWM user know
+about the current PWM state would allow him to avoid glitches.
+
+Drivers should not implement any power management. In other words,
+consumers should implement it as described in the "Using PWMs" section.
+
+Locking
+-------
+
+The PWM core list manipulations are protected by a mutex, so pwm_request()
+and pwm_free() may not be called from an atomic context. Currently the
+PWM core does not enforce any locking to pwm_enable(), pwm_disable() and
+pwm_config(), so the calling context is currently driver specific. This
+is an issue derived from the former barebone API and should be fixed soon.
+
+Helpers
+-------
+
+Currently a PWM can only be configured with period_ns and duty_ns. For several
+use cases freq_hz and duty_percent might be better. Instead of calculating
+this in your driver please consider adding appropriate helpers to the framework.
diff --git a/Documentation/driver-api/rapidio.rst b/Documentation/driver-api/rapidio.rst
deleted file mode 100644
index 71ff658ab78e..000000000000
--- a/Documentation/driver-api/rapidio.rst
+++ /dev/null
@@ -1,107 +0,0 @@
-=======================
-RapidIO Subsystem Guide
-=======================
-
-:Author: Matt Porter
-
-Introduction
-============
-
-RapidIO is a high speed switched fabric interconnect with features aimed
-at the embedded market. RapidIO provides support for memory-mapped I/O
-as well as message-based transactions over the switched fabric network.
-RapidIO has a standardized discovery mechanism not unlike the PCI bus
-standard that allows simple detection of devices in a network.
-
-This documentation is provided for developers intending to support
-RapidIO on new architectures, write new drivers, or to understand the
-subsystem internals.
-
-Known Bugs and Limitations
-==========================
-
-Bugs
-----
-
-None. ;)
-
-Limitations
------------
-
-1. Access/management of RapidIO memory regions is not supported
-
-2. Multiple host enumeration is not supported
-
-RapidIO driver interface
-========================
-
-Drivers are provided a set of calls in order to interface with the
-subsystem to gather info on devices, request/map memory region
-resources, and manage mailboxes/doorbells.
-
-Functions
----------
-
-.. kernel-doc:: include/linux/rio_drv.h
- :internal:
-
-.. kernel-doc:: drivers/rapidio/rio-driver.c
- :export:
-
-.. kernel-doc:: drivers/rapidio/rio.c
- :export:
-
-Internals
-=========
-
-This chapter contains the autogenerated documentation of the RapidIO
-subsystem.
-
-Structures
-----------
-
-.. kernel-doc:: include/linux/rio.h
- :internal:
-
-Enumeration and Discovery
--------------------------
-
-.. kernel-doc:: drivers/rapidio/rio-scan.c
- :internal:
-
-Driver functionality
---------------------
-
-.. kernel-doc:: drivers/rapidio/rio.c
- :internal:
-
-.. kernel-doc:: drivers/rapidio/rio-access.c
- :internal:
-
-Device model support
---------------------
-
-.. kernel-doc:: drivers/rapidio/rio-driver.c
- :internal:
-
-PPC32 support
--------------
-
-.. kernel-doc:: arch/powerpc/sysdev/fsl_rio.c
- :internal:
-
-Credits
-=======
-
-The following people have contributed to the RapidIO subsystem directly
-or indirectly:
-
-1. Matt Porter\ mporter@kernel.crashing.org
-
-2. Randy Vinson\ rvinson@mvista.com
-
-3. Dan Malek\ dan@embeddedalley.com
-
-The following people have contributed to this document:
-
-1. Matt Porter\ mporter@kernel.crashing.org
diff --git a/Documentation/driver-api/rapidio/index.rst b/Documentation/driver-api/rapidio/index.rst
new file mode 100644
index 000000000000..a41b4242d16f
--- /dev/null
+++ b/Documentation/driver-api/rapidio/index.rst
@@ -0,0 +1,15 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+===========================
+The Linux RapidIO Subsystem
+===========================
+
+.. toctree::
+ :maxdepth: 1
+
+ rapidio
+ sysfs
+
+ tsi721
+ mport_cdev
+ rio_cm
diff --git a/Documentation/driver-api/rapidio/mport_cdev.rst b/Documentation/driver-api/rapidio/mport_cdev.rst
new file mode 100644
index 000000000000..df77a7f7be7d
--- /dev/null
+++ b/Documentation/driver-api/rapidio/mport_cdev.rst
@@ -0,0 +1,110 @@
+==================================================================
+RapidIO subsystem mport character device driver (rio_mport_cdev.c)
+==================================================================
+
+1. Overview
+===========
+
+This device driver is the result of collaboration within the RapidIO.org
+Software Task Group (STG) between Texas Instruments, Freescale,
+Prodrive Technologies, Nokia Networks, BAE and IDT. Additional input was
+received from other members of RapidIO.org. The objective was to create a
+character mode driver interface which exposes the capabilities of RapidIO
+devices directly to applications, in a manner that allows the numerous and
+varied RapidIO implementations to interoperate.
+
+This driver (MPORT_CDEV) provides access to basic RapidIO subsystem operations
+for user-space applications. Most of RapidIO operations are supported through
+'ioctl' system calls.
+
+When loaded this device driver creates filesystem nodes named rio_mportX in /dev
+directory for each registered RapidIO mport device. 'X' in the node name matches
+to unique port ID assigned to each local mport device.
+
+Using available set of ioctl commands user-space applications can perform
+following RapidIO bus and subsystem operations:
+
+- Reads and writes from/to configuration registers of mport devices
+ (RIO_MPORT_MAINT_READ_LOCAL/RIO_MPORT_MAINT_WRITE_LOCAL)
+- Reads and writes from/to configuration registers of remote RapidIO devices.
+ This operations are defined as RapidIO Maintenance reads/writes in RIO spec.
+ (RIO_MPORT_MAINT_READ_REMOTE/RIO_MPORT_MAINT_WRITE_REMOTE)
+- Set RapidIO Destination ID for mport devices (RIO_MPORT_MAINT_HDID_SET)
+- Set RapidIO Component Tag for mport devices (RIO_MPORT_MAINT_COMPTAG_SET)
+- Query logical index of mport devices (RIO_MPORT_MAINT_PORT_IDX_GET)
+- Query capabilities and RapidIO link configuration of mport devices
+ (RIO_MPORT_GET_PROPERTIES)
+- Enable/Disable reporting of RapidIO doorbell events to user-space applications
+ (RIO_ENABLE_DOORBELL_RANGE/RIO_DISABLE_DOORBELL_RANGE)
+- Enable/Disable reporting of RIO port-write events to user-space applications
+ (RIO_ENABLE_PORTWRITE_RANGE/RIO_DISABLE_PORTWRITE_RANGE)
+- Query/Control type of events reported through this driver: doorbells,
+ port-writes or both (RIO_SET_EVENT_MASK/RIO_GET_EVENT_MASK)
+- Configure/Map mport's outbound requests window(s) for specific size,
+ RapidIO destination ID, hopcount and request type
+ (RIO_MAP_OUTBOUND/RIO_UNMAP_OUTBOUND)
+- Configure/Map mport's inbound requests window(s) for specific size,
+ RapidIO base address and local memory base address
+ (RIO_MAP_INBOUND/RIO_UNMAP_INBOUND)
+- Allocate/Free contiguous DMA coherent memory buffer for DMA data transfers
+ to/from remote RapidIO devices (RIO_ALLOC_DMA/RIO_FREE_DMA)
+- Initiate DMA data transfers to/from remote RapidIO devices (RIO_TRANSFER).
+ Supports blocking, asynchronous and posted (a.k.a 'fire-and-forget') data
+ transfer modes.
+- Check/Wait for completion of asynchronous DMA data transfer
+ (RIO_WAIT_FOR_ASYNC)
+- Manage device objects supported by RapidIO subsystem (RIO_DEV_ADD/RIO_DEV_DEL).
+ This allows implementation of various RapidIO fabric enumeration algorithms
+ as user-space applications while using remaining functionality provided by
+ kernel RapidIO subsystem.
+
+2. Hardware Compatibility
+=========================
+
+This device driver uses standard interfaces defined by kernel RapidIO subsystem
+and therefore it can be used with any mport device driver registered by RapidIO
+subsystem with limitations set by available mport implementation.
+
+At this moment the most common limitation is availability of RapidIO-specific
+DMA engine framework for specific mport device. Users should verify available
+functionality of their platform when planning to use this driver:
+
+- IDT Tsi721 PCIe-to-RapidIO bridge device and its mport device driver are fully
+ compatible with this driver.
+- Freescale SoCs 'fsl_rio' mport driver does not have implementation for RapidIO
+ specific DMA engine support and therefore DMA data transfers mport_cdev driver
+ are not available.
+
+3. Module parameters
+====================
+
+- 'dma_timeout'
+ - DMA transfer completion timeout (in msec, default value 3000).
+ This parameter set a maximum completion wait time for SYNC mode DMA
+ transfer requests and for RIO_WAIT_FOR_ASYNC ioctl requests.
+
+- 'dbg_level'
+ - This parameter allows to control amount of debug information
+ generated by this device driver. This parameter is formed by set of
+ bit masks that correspond to the specific functional blocks.
+ For mask definitions see 'drivers/rapidio/devices/rio_mport_cdev.c'
+ This parameter can be changed dynamically.
+ Use CONFIG_RAPIDIO_DEBUG=y to enable debug output at the top level.
+
+4. Known problems
+=================
+
+ None.
+
+5. User-space Applications and API
+==================================
+
+API library and applications that use this device driver are available from
+RapidIO.org.
+
+6. TODO List
+============
+
+- Add support for sending/receiving "raw" RapidIO messaging packets.
+- Add memory mapped DMA data transfers as an option when RapidIO-specific DMA
+ is not available.
diff --git a/Documentation/driver-api/rapidio/rapidio.rst b/Documentation/driver-api/rapidio/rapidio.rst
new file mode 100644
index 000000000000..fb8942d3ba85
--- /dev/null
+++ b/Documentation/driver-api/rapidio/rapidio.rst
@@ -0,0 +1,362 @@
+============
+Introduction
+============
+
+The RapidIO standard is a packet-based fabric interconnect standard designed for
+use in embedded systems. Development of the RapidIO standard is directed by the
+RapidIO Trade Association (RTA). The current version of the RapidIO specification
+is publicly available for download from the RTA web-site [1].
+
+This document describes the basics of the Linux RapidIO subsystem and provides
+information on its major components.
+
+1 Overview
+==========
+
+Because the RapidIO subsystem follows the Linux device model it is integrated
+into the kernel similarly to other buses by defining RapidIO-specific device and
+bus types and registering them within the device model.
+
+The Linux RapidIO subsystem is architecture independent and therefore defines
+architecture-specific interfaces that provide support for common RapidIO
+subsystem operations.
+
+2. Core Components
+==================
+
+A typical RapidIO network is a combination of endpoints and switches.
+Each of these components is represented in the subsystem by an associated data
+structure. The core logical components of the RapidIO subsystem are defined
+in include/linux/rio.h file.
+
+2.1 Master Port
+---------------
+
+A master port (or mport) is a RapidIO interface controller that is local to the
+processor executing the Linux code. A master port generates and receives RapidIO
+packets (transactions). In the RapidIO subsystem each master port is represented
+by a rio_mport data structure. This structure contains master port specific
+resources such as mailboxes and doorbells. The rio_mport also includes a unique
+host device ID that is valid when a master port is configured as an enumerating
+host.
+
+RapidIO master ports are serviced by subsystem specific mport device drivers
+that provide functionality defined for this subsystem. To provide a hardware
+independent interface for RapidIO subsystem operations, rio_mport structure
+includes rio_ops data structure which contains pointers to hardware specific
+implementations of RapidIO functions.
+
+2.2 Device
+----------
+
+A RapidIO device is any endpoint (other than mport) or switch in the network.
+All devices are presented in the RapidIO subsystem by corresponding rio_dev data
+structure. Devices form one global device list and per-network device lists
+(depending on number of available mports and networks).
+
+2.3 Switch
+----------
+
+A RapidIO switch is a special class of device that routes packets between its
+ports towards their final destination. The packet destination port within a
+switch is defined by an internal routing table. A switch is presented in the
+RapidIO subsystem by rio_dev data structure expanded by additional rio_switch
+data structure, which contains switch specific information such as copy of the
+routing table and pointers to switch specific functions.
+
+The RapidIO subsystem defines the format and initialization method for subsystem
+specific switch drivers that are designed to provide hardware-specific
+implementation of common switch management routines.
+
+2.4 Network
+-----------
+
+A RapidIO network is a combination of interconnected endpoint and switch devices.
+Each RapidIO network known to the system is represented by corresponding rio_net
+data structure. This structure includes lists of all devices and local master
+ports that form the same network. It also contains a pointer to the default
+master port that is used to communicate with devices within the network.
+
+2.5 Device Drivers
+------------------
+
+RapidIO device-specific drivers follow Linux Kernel Driver Model and are
+intended to support specific RapidIO devices attached to the RapidIO network.
+
+2.6 Subsystem Interfaces
+------------------------
+
+RapidIO interconnect specification defines features that may be used to provide
+one or more common service layers for all participating RapidIO devices. These
+common services may act separately from device-specific drivers or be used by
+device-specific drivers. Example of such service provider is the RIONET driver
+which implements Ethernet-over-RapidIO interface. Because only one driver can be
+registered for a device, all common RapidIO services have to be registered as
+subsystem interfaces. This allows to have multiple common services attached to
+the same device without blocking attachment of a device-specific driver.
+
+3. Subsystem Initialization
+===========================
+
+In order to initialize the RapidIO subsystem, a platform must initialize and
+register at least one master port within the RapidIO network. To register mport
+within the subsystem controller driver's initialization code calls function
+rio_register_mport() for each available master port.
+
+After all active master ports are registered with a RapidIO subsystem,
+an enumeration and/or discovery routine may be called automatically or
+by user-space command.
+
+RapidIO subsystem can be configured to be built as a statically linked or
+modular component of the kernel (see details below).
+
+4. Enumeration and Discovery
+============================
+
+4.1 Overview
+------------
+
+RapidIO subsystem configuration options allow users to build enumeration and
+discovery methods as statically linked components or loadable modules.
+An enumeration/discovery method implementation and available input parameters
+define how any given method can be attached to available RapidIO mports:
+simply to all available mports OR individually to the specified mport device.
+
+Depending on selected enumeration/discovery build configuration, there are
+several methods to initiate an enumeration and/or discovery process:
+
+ (a) Statically linked enumeration and discovery process can be started
+ automatically during kernel initialization time using corresponding module
+ parameters. This was the original method used since introduction of RapidIO
+ subsystem. Now this method relies on enumerator module parameter which is
+ 'rio-scan.scan' for existing basic enumeration/discovery method.
+ When automatic start of enumeration/discovery is used a user has to ensure
+ that all discovering endpoints are started before the enumerating endpoint
+ and are waiting for enumeration to be completed.
+ Configuration option CONFIG_RAPIDIO_DISC_TIMEOUT defines time that discovering
+ endpoint waits for enumeration to be completed. If the specified timeout
+ expires the discovery process is terminated without obtaining RapidIO network
+ information. NOTE: a timed out discovery process may be restarted later using
+ a user-space command as it is described below (if the given endpoint was
+ enumerated successfully).
+
+ (b) Statically linked enumeration and discovery process can be started by
+ a command from user space. This initiation method provides more flexibility
+ for a system startup compared to the option (a) above. After all participating
+ endpoints have been successfully booted, an enumeration process shall be
+ started first by issuing a user-space command, after an enumeration is
+ completed a discovery process can be started on all remaining endpoints.
+
+ (c) Modular enumeration and discovery process can be started by a command from
+ user space. After an enumeration/discovery module is loaded, a network scan
+ process can be started by issuing a user-space command.
+ Similar to the option (b) above, an enumerator has to be started first.
+
+ (d) Modular enumeration and discovery process can be started by a module
+ initialization routine. In this case an enumerating module shall be loaded
+ first.
+
+When a network scan process is started it calls an enumeration or discovery
+routine depending on the configured role of a master port: host or agent.
+
+Enumeration is performed by a master port if it is configured as a host port by
+assigning a host destination ID greater than or equal to zero. The host
+destination ID can be assigned to a master port using various methods depending
+on RapidIO subsystem build configuration:
+
+ (a) For a statically linked RapidIO subsystem core use command line parameter
+ "rapidio.hdid=" with a list of destination ID assignments in order of mport
+ device registration. For example, in a system with two RapidIO controllers
+ the command line parameter "rapidio.hdid=-1,7" will result in assignment of
+ the host destination ID=7 to the second RapidIO controller, while the first
+ one will be assigned destination ID=-1.
+
+ (b) If the RapidIO subsystem core is built as a loadable module, in addition
+ to the method shown above, the host destination ID(s) can be specified using
+ traditional methods of passing module parameter "hdid=" during its loading:
+
+ - from command line: "modprobe rapidio hdid=-1,7", or
+ - from modprobe configuration file using configuration command "options",
+ like in this example: "options rapidio hdid=-1,7". An example of modprobe
+ configuration file is provided in the section below.
+
+NOTES:
+ (i) if "hdid=" parameter is omitted all available mport will be assigned
+ destination ID = -1;
+
+ (ii) the "hdid=" parameter in systems with multiple mports can have
+ destination ID assignments omitted from the end of list (default = -1).
+
+If the host device ID for a specific master port is set to -1, the discovery
+process will be performed for it.
+
+The enumeration and discovery routines use RapidIO maintenance transactions
+to access the configuration space of devices.
+
+NOTE: If RapidIO switch-specific device drivers are built as loadable modules
+they must be loaded before enumeration/discovery process starts.
+This requirement is cased by the fact that enumeration/discovery methods invoke
+vendor-specific callbacks on early stages.
+
+4.2 Automatic Start of Enumeration and Discovery
+------------------------------------------------
+
+Automatic enumeration/discovery start method is applicable only to built-in
+enumeration/discovery RapidIO configuration selection. To enable automatic
+enumeration/discovery start by existing basic enumerator method set use boot
+command line parameter "rio-scan.scan=1".
+
+This configuration requires synchronized start of all RapidIO endpoints that
+form a network which will be enumerated/discovered. Discovering endpoints have
+to be started before an enumeration starts to ensure that all RapidIO
+controllers have been initialized and are ready to be discovered. Configuration
+parameter CONFIG_RAPIDIO_DISC_TIMEOUT defines time (in seconds) which
+a discovering endpoint will wait for enumeration to be completed.
+
+When automatic enumeration/discovery start is selected, basic method's
+initialization routine calls rio_init_mports() to perform enumeration or
+discovery for all known mport devices.
+
+Depending on RapidIO network size and configuration this automatic
+enumeration/discovery start method may be difficult to use due to the
+requirement for synchronized start of all endpoints.
+
+4.3 User-space Start of Enumeration and Discovery
+-------------------------------------------------
+
+User-space start of enumeration and discovery can be used with built-in and
+modular build configurations. For user-space controlled start RapidIO subsystem
+creates the sysfs write-only attribute file '/sys/bus/rapidio/scan'. To initiate
+an enumeration or discovery process on specific mport device, a user needs to
+write mport_ID (not RapidIO destination ID) into that file. The mport_ID is a
+sequential number (0 ... RIO_MAX_MPORTS) assigned during mport device
+registration. For example for machine with single RapidIO controller, mport_ID
+for that controller always will be 0.
+
+To initiate RapidIO enumeration/discovery on all available mports a user may
+write '-1' (or RIO_MPORT_ANY) into the scan attribute file.
+
+4.4 Basic Enumeration Method
+----------------------------
+
+This is an original enumeration/discovery method which is available since
+first release of RapidIO subsystem code. The enumeration process is
+implemented according to the enumeration algorithm outlined in the RapidIO
+Interconnect Specification: Annex I [1].
+
+This method can be configured as statically linked or loadable module.
+The method's single parameter "scan" allows to trigger the enumeration/discovery
+process from module initialization routine.
+
+This enumeration/discovery method can be started only once and does not support
+unloading if it is built as a module.
+
+The enumeration process traverses the network using a recursive depth-first
+algorithm. When a new device is found, the enumerator takes ownership of that
+device by writing into the Host Device ID Lock CSR. It does this to ensure that
+the enumerator has exclusive right to enumerate the device. If device ownership
+is successfully acquired, the enumerator allocates a new rio_dev structure and
+initializes it according to device capabilities.
+
+If the device is an endpoint, a unique device ID is assigned to it and its value
+is written into the device's Base Device ID CSR.
+
+If the device is a switch, the enumerator allocates an additional rio_switch
+structure to store switch specific information. Then the switch's vendor ID and
+device ID are queried against a table of known RapidIO switches. Each switch
+table entry contains a pointer to a switch-specific initialization routine that
+initializes pointers to the rest of switch specific operations, and performs
+hardware initialization if necessary. A RapidIO switch does not have a unique
+device ID; it relies on hopcount and routing for device ID of an attached
+endpoint if access to its configuration registers is required. If a switch (or
+chain of switches) does not have any endpoint (except enumerator) attached to
+it, a fake device ID will be assigned to configure a route to that switch.
+In the case of a chain of switches without endpoint, one fake device ID is used
+to configure a route through the entire chain and switches are differentiated by
+their hopcount value.
+
+For both endpoints and switches the enumerator writes a unique component tag
+into device's Component Tag CSR. That unique value is used by the error
+management notification mechanism to identify a device that is reporting an
+error management event.
+
+Enumeration beyond a switch is completed by iterating over each active egress
+port of that switch. For each active link, a route to a default device ID
+(0xFF for 8-bit systems and 0xFFFF for 16-bit systems) is temporarily written
+into the routing table. The algorithm recurs by calling itself with hopcount + 1
+and the default device ID in order to access the device on the active port.
+
+After the host has completed enumeration of the entire network it releases
+devices by clearing device ID locks (calls rio_clear_locks()). For each endpoint
+in the system, it sets the Discovered bit in the Port General Control CSR
+to indicate that enumeration is completed and agents are allowed to execute
+passive discovery of the network.
+
+The discovery process is performed by agents and is similar to the enumeration
+process that is described above. However, the discovery process is performed
+without changes to the existing routing because agents only gather information
+about RapidIO network structure and are building an internal map of discovered
+devices. This way each Linux-based component of the RapidIO subsystem has
+a complete view of the network. The discovery process can be performed
+simultaneously by several agents. After initializing its RapidIO master port
+each agent waits for enumeration completion by the host for the configured wait
+time period. If this wait time period expires before enumeration is completed,
+an agent skips RapidIO discovery and continues with remaining kernel
+initialization.
+
+4.5 Adding New Enumeration/Discovery Method
+-------------------------------------------
+
+RapidIO subsystem code organization allows addition of new enumeration/discovery
+methods as new configuration options without significant impact to the core
+RapidIO code.
+
+A new enumeration/discovery method has to be attached to one or more mport
+devices before an enumeration/discovery process can be started. Normally,
+method's module initialization routine calls rio_register_scan() to attach
+an enumerator to a specified mport device (or devices). The basic enumerator
+implementation demonstrates this process.
+
+4.6 Using Loadable RapidIO Switch Drivers
+-----------------------------------------
+
+In the case when RapidIO switch drivers are built as loadable modules a user
+must ensure that they are loaded before the enumeration/discovery starts.
+This process can be automated by specifying pre- or post- dependencies in the
+RapidIO-specific modprobe configuration file as shown in the example below.
+
+File /etc/modprobe.d/rapidio.conf::
+
+ # Configure RapidIO subsystem modules
+
+ # Set enumerator host destination ID (overrides kernel command line option)
+ options rapidio hdid=-1,2
+
+ # Load RapidIO switch drivers immediately after rapidio core module was loaded
+ softdep rapidio post: idt_gen2 idtcps tsi57x
+
+ # OR :
+
+ # Load RapidIO switch drivers just before rio-scan enumerator module is loaded
+ softdep rio-scan pre: idt_gen2 idtcps tsi57x
+
+ --------------------------
+
+NOTE:
+ In the example above, one of "softdep" commands must be removed or
+ commented out to keep required module loading sequence.
+
+5. References
+=============
+
+[1] RapidIO Trade Association. RapidIO Interconnect Specifications.
+ http://www.rapidio.org.
+
+[2] Rapidio TA. Technology Comparisons.
+ http://www.rapidio.org/education/technology_comparisons/
+
+[3] RapidIO support for Linux.
+ http://lwn.net/Articles/139118/
+
+[4] Matt Porter. RapidIO for Linux. Ottawa Linux Symposium, 2005
+ http://www.kernel.org/doc/ols/2005/ols2005v2-pages-43-56.pdf
diff --git a/Documentation/driver-api/rapidio/rio_cm.rst b/Documentation/driver-api/rapidio/rio_cm.rst
new file mode 100644
index 000000000000..5294430a7a74
--- /dev/null
+++ b/Documentation/driver-api/rapidio/rio_cm.rst
@@ -0,0 +1,135 @@
+==========================================================================
+RapidIO subsystem Channelized Messaging character device driver (rio_cm.c)
+==========================================================================
+
+
+1. Overview
+===========
+
+This device driver is the result of collaboration within the RapidIO.org
+Software Task Group (STG) between Texas Instruments, Prodrive Technologies,
+Nokia Networks, BAE and IDT. Additional input was received from other members
+of RapidIO.org.
+
+The objective was to create a character mode driver interface which exposes
+messaging capabilities of RapidIO endpoint devices (mports) directly
+to applications, in a manner that allows the numerous and varied RapidIO
+implementations to interoperate.
+
+This driver (RIO_CM) provides to user-space applications shared access to
+RapidIO mailbox messaging resources.
+
+RapidIO specification (Part 2) defines that endpoint devices may have up to four
+messaging mailboxes in case of multi-packet message (up to 4KB) and
+up to 64 mailboxes if single-packet messages (up to 256 B) are used. In addition
+to protocol definition limitations, a particular hardware implementation can
+have reduced number of messaging mailboxes. RapidIO aware applications must
+therefore share the messaging resources of a RapidIO endpoint.
+
+Main purpose of this device driver is to provide RapidIO mailbox messaging
+capability to large number of user-space processes by introducing socket-like
+operations using a single messaging mailbox. This allows applications to
+use the limited RapidIO messaging hardware resources efficiently.
+
+Most of device driver's operations are supported through 'ioctl' system calls.
+
+When loaded this device driver creates a single file system node named rio_cm
+in /dev directory common for all registered RapidIO mport devices.
+
+Following ioctl commands are available to user-space applications:
+
+- RIO_CM_MPORT_GET_LIST:
+ Returns to caller list of local mport devices that
+ support messaging operations (number of entries up to RIO_MAX_MPORTS).
+ Each list entry is combination of mport's index in the system and RapidIO
+ destination ID assigned to the port.
+- RIO_CM_EP_GET_LIST_SIZE:
+ Returns number of messaging capable remote endpoints
+ in a RapidIO network associated with the specified mport device.
+- RIO_CM_EP_GET_LIST:
+ Returns list of RapidIO destination IDs for messaging
+ capable remote endpoints (peers) available in a RapidIO network associated
+ with the specified mport device.
+- RIO_CM_CHAN_CREATE:
+ Creates RapidIO message exchange channel data structure
+ with channel ID assigned automatically or as requested by a caller.
+- RIO_CM_CHAN_BIND:
+ Binds the specified channel data structure to the specified
+ mport device.
+- RIO_CM_CHAN_LISTEN:
+ Enables listening for connection requests on the specified
+ channel.
+- RIO_CM_CHAN_ACCEPT:
+ Accepts a connection request from peer on the specified
+ channel. If wait timeout for this request is specified by a caller it is
+ a blocking call. If timeout set to 0 this is non-blocking call - ioctl
+ handler checks for a pending connection request and if one is not available
+ exits with -EGAIN error status immediately.
+- RIO_CM_CHAN_CONNECT:
+ Sends a connection request to a remote peer/channel.
+- RIO_CM_CHAN_SEND:
+ Sends a data message through the specified channel.
+ The handler for this request assumes that message buffer specified by
+ a caller includes the reserved space for a packet header required by
+ this driver.
+- RIO_CM_CHAN_RECEIVE:
+ Receives a data message through a connected channel.
+ If the channel does not have an incoming message ready to return this ioctl
+ handler will wait for new message until timeout specified by a caller
+ expires. If timeout value is set to 0, ioctl handler uses a default value
+ defined by MAX_SCHEDULE_TIMEOUT.
+- RIO_CM_CHAN_CLOSE:
+ Closes a specified channel and frees associated buffers.
+ If the specified channel is in the CONNECTED state, sends close notification
+ to the remote peer.
+
+The ioctl command codes and corresponding data structures intended for use by
+user-space applications are defined in 'include/uapi/linux/rio_cm_cdev.h'.
+
+2. Hardware Compatibility
+=========================
+
+This device driver uses standard interfaces defined by kernel RapidIO subsystem
+and therefore it can be used with any mport device driver registered by RapidIO
+subsystem with limitations set by available mport HW implementation of messaging
+mailboxes.
+
+3. Module parameters
+====================
+
+- 'dbg_level'
+ - This parameter allows to control amount of debug information
+ generated by this device driver. This parameter is formed by set of
+ bit masks that correspond to the specific functional block.
+ For mask definitions see 'drivers/rapidio/devices/rio_cm.c'
+ This parameter can be changed dynamically.
+ Use CONFIG_RAPIDIO_DEBUG=y to enable debug output at the top level.
+
+- 'cmbox'
+ - Number of RapidIO mailbox to use (default value is 1).
+ This parameter allows to set messaging mailbox number that will be used
+ within entire RapidIO network. It can be used when default mailbox is
+ used by other device drivers or is not supported by some nodes in the
+ RapidIO network.
+
+- 'chstart'
+ - Start channel number for dynamic assignment. Default value - 256.
+ Allows to exclude channel numbers below this parameter from dynamic
+ allocation to avoid conflicts with software components that use
+ reserved predefined channel numbers.
+
+4. Known problems
+=================
+
+ None.
+
+5. User-space Applications and API Library
+==========================================
+
+Messaging API library and applications that use this device driver are available
+from RapidIO.org.
+
+6. TODO List
+============
+
+- Add support for system notification messages (reserved channel 0).
diff --git a/Documentation/driver-api/rapidio/sysfs.rst b/Documentation/driver-api/rapidio/sysfs.rst
new file mode 100644
index 000000000000..540f72683496
--- /dev/null
+++ b/Documentation/driver-api/rapidio/sysfs.rst
@@ -0,0 +1,7 @@
+=============
+Sysfs entries
+=============
+
+The RapidIO sysfs files have moved to:
+Documentation/ABI/testing/sysfs-bus-rapidio and
+Documentation/ABI/testing/sysfs-class-rapidio
diff --git a/Documentation/driver-api/rapidio/tsi721.rst b/Documentation/driver-api/rapidio/tsi721.rst
new file mode 100644
index 000000000000..42aea438cd20
--- /dev/null
+++ b/Documentation/driver-api/rapidio/tsi721.rst
@@ -0,0 +1,112 @@
+=========================================================================
+RapidIO subsystem mport driver for IDT Tsi721 PCI Express-to-SRIO bridge.
+=========================================================================
+
+1. Overview
+===========
+
+This driver implements all currently defined RapidIO mport callback functions.
+It supports maintenance read and write operations, inbound and outbound RapidIO
+doorbells, inbound maintenance port-writes and RapidIO messaging.
+
+To generate SRIO maintenance transactions this driver uses one of Tsi721 DMA
+channels. This mechanism provides access to larger range of hop counts and
+destination IDs without need for changes in outbound window translation.
+
+RapidIO messaging support uses dedicated messaging channels for each mailbox.
+For inbound messages this driver uses destination ID matching to forward messages
+into the corresponding message queue. Messaging callbacks are implemented to be
+fully compatible with RIONET driver (Ethernet over RapidIO messaging services).
+
+1. Module parameters:
+
+- 'dbg_level'
+ - This parameter allows to control amount of debug information
+ generated by this device driver. This parameter is formed by set of
+ This parameter can be changed bit masks that correspond to the specific
+ functional block.
+ For mask definitions see 'drivers/rapidio/devices/tsi721.h'
+ This parameter can be changed dynamically.
+ Use CONFIG_RAPIDIO_DEBUG=y to enable debug output at the top level.
+
+- 'dma_desc_per_channel'
+ - This parameter defines number of hardware buffer
+ descriptors allocated for each registered Tsi721 DMA channel.
+ Its default value is 128.
+
+- 'dma_txqueue_sz'
+ - DMA transactions queue size. Defines number of pending
+ transaction requests that can be accepted by each DMA channel.
+ Default value is 16.
+
+- 'dma_sel'
+ - DMA channel selection mask. Bitmask that defines which hardware
+ DMA channels (0 ... 6) will be registered with DmaEngine core.
+ If bit is set to 1, the corresponding DMA channel will be registered.
+ DMA channels not selected by this mask will not be used by this device
+ driver. Default value is 0x7f (use all channels).
+
+- 'pcie_mrrs'
+ - override value for PCIe Maximum Read Request Size (MRRS).
+ This parameter gives an ability to override MRRS value set during PCIe
+ configuration process. Tsi721 supports read request sizes up to 4096B.
+ Value for this parameter must be set as defined by PCIe specification:
+ 0 = 128B, 1 = 256B, 2 = 512B, 3 = 1024B, 4 = 2048B and 5 = 4096B.
+ Default value is '-1' (= keep platform setting).
+
+- 'mbox_sel'
+ - RIO messaging MBOX selection mask. This is a bitmask that defines
+ messaging MBOXes are managed by this device driver. Mask bits 0 - 3
+ correspond to MBOX0 - MBOX3. MBOX is under driver's control if the
+ corresponding bit is set to '1'. Default value is 0x0f (= all).
+
+2. Known problems
+=================
+
+ None.
+
+3. DMA Engine Support
+=====================
+
+Tsi721 mport driver supports DMA data transfers between local system memory and
+remote RapidIO devices. This functionality is implemented according to SLAVE
+mode API defined by common Linux kernel DMA Engine framework.
+
+Depending on system requirements RapidIO DMA operations can be included/excluded
+by setting CONFIG_RAPIDIO_DMA_ENGINE option. Tsi721 miniport driver uses seven
+out of eight available BDMA channels to support DMA data transfers.
+One BDMA channel is reserved for generation of maintenance read/write requests.
+
+If Tsi721 mport driver have been built with RAPIDIO_DMA_ENGINE support included,
+this driver will accept DMA-specific module parameter:
+
+ "dma_desc_per_channel"
+ - defines number of hardware buffer descriptors used by
+ each BDMA channel of Tsi721 (by default - 128).
+
+4. Version History
+
+ ===== ====================================================================
+ 1.1.0 DMA operations re-worked to support data scatter/gather lists larger
+ than hardware buffer descriptors ring.
+ 1.0.0 Initial driver release.
+ ===== ====================================================================
+
+5. License
+===========
+
+ Copyright(c) 2011 Integrated Device Technology, Inc. All rights reserved.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms of the GNU General Public License as published by the Free
+ Software Foundation; either version 2 of the License, or (at your option)
+ any later version.
+
+ This program is distributed in the hope that it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
diff --git a/Documentation/driver-api/rfkill.rst b/Documentation/driver-api/rfkill.rst
new file mode 100644
index 000000000000..7d3684e81df6
--- /dev/null
+++ b/Documentation/driver-api/rfkill.rst
@@ -0,0 +1,132 @@
+===============================
+rfkill - RF kill switch support
+===============================
+
+
+.. contents::
+ :depth: 2
+
+Introduction
+============
+
+The rfkill subsystem provides a generic interface for disabling any radio
+transmitter in the system. When a transmitter is blocked, it shall not
+radiate any power.
+
+The subsystem also provides the ability to react on button presses and
+disable all transmitters of a certain type (or all). This is intended for
+situations where transmitters need to be turned off, for example on
+aircraft.
+
+The rfkill subsystem has a concept of "hard" and "soft" block, which
+differ little in their meaning (block == transmitters off) but rather in
+whether they can be changed or not:
+
+ - hard block
+ read-only radio block that cannot be overridden by software
+
+ - soft block
+ writable radio block (need not be readable) that is set by
+ the system software.
+
+The rfkill subsystem has two parameters, rfkill.default_state and
+rfkill.master_switch_mode, which are documented in
+admin-guide/kernel-parameters.rst.
+
+
+Implementation details
+======================
+
+The rfkill subsystem is composed of three main components:
+
+ * the rfkill core,
+ * the deprecated rfkill-input module (an input layer handler, being
+ replaced by userspace policy code) and
+ * the rfkill drivers.
+
+The rfkill core provides API for kernel drivers to register their radio
+transmitter with the kernel, methods for turning it on and off, and letting
+the system know about hardware-disabled states that may be implemented on
+the device.
+
+The rfkill core code also notifies userspace of state changes, and provides
+ways for userspace to query the current states. See the "Userspace support"
+section below.
+
+When the device is hard-blocked (either by a call to rfkill_set_hw_state()
+or from query_hw_block), set_block() will be invoked for additional software
+block, but drivers can ignore the method call since they can use the return
+value of the function rfkill_set_hw_state() to sync the software state
+instead of keeping track of calls to set_block(). In fact, drivers should
+use the return value of rfkill_set_hw_state() unless the hardware actually
+keeps track of soft and hard block separately.
+
+
+Kernel API
+==========
+
+Drivers for radio transmitters normally implement an rfkill driver.
+
+Platform drivers might implement input devices if the rfkill button is just
+that, a button. If that button influences the hardware then you need to
+implement an rfkill driver instead. This also applies if the platform provides
+a way to turn on/off the transmitter(s).
+
+For some platforms, it is possible that the hardware state changes during
+suspend/hibernation, in which case it will be necessary to update the rfkill
+core with the current state at resume time.
+
+To create an rfkill driver, driver's Kconfig needs to have::
+
+ depends on RFKILL || !RFKILL
+
+to ensure the driver cannot be built-in when rfkill is modular. The !RFKILL
+case allows the driver to be built when rfkill is not configured, in which
+case all rfkill API can still be used but will be provided by static inlines
+which compile to almost nothing.
+
+Calling rfkill_set_hw_state() when a state change happens is required from
+rfkill drivers that control devices that can be hard-blocked unless they also
+assign the poll_hw_block() callback (then the rfkill core will poll the
+device). Don't do this unless you cannot get the event in any other way.
+
+rfkill provides per-switch LED triggers, which can be used to drive LEDs
+according to the switch state (LED_FULL when blocked, LED_OFF otherwise).
+
+
+Userspace support
+=================
+
+The recommended userspace interface to use is /dev/rfkill, which is a misc
+character device that allows userspace to obtain and set the state of rfkill
+devices and sets of devices. It also notifies userspace about device addition
+and removal. The API is a simple read/write API that is defined in
+linux/rfkill.h, with one ioctl that allows turning off the deprecated input
+handler in the kernel for the transition period.
+
+Except for the one ioctl, communication with the kernel is done via read()
+and write() of instances of 'struct rfkill_event'. In this structure, the
+soft and hard block are properly separated (unlike sysfs, see below) and
+userspace is able to get a consistent snapshot of all rfkill devices in the
+system. Also, it is possible to switch all rfkill drivers (or all drivers of
+a specified type) into a state which also updates the default state for
+hotplugged devices.
+
+After an application opens /dev/rfkill, it can read the current state of all
+devices. Changes can be obtained by either polling the descriptor for
+hotplug or state change events or by listening for uevents emitted by the
+rfkill core framework.
+
+Additionally, each rfkill device is registered in sysfs and emits uevents.
+
+rfkill devices issue uevents (with an action of "change"), with the following
+environment variables set::
+
+ RFKILL_NAME
+ RFKILL_STATE
+ RFKILL_TYPE
+
+The content of these variables corresponds to the "name", "state" and
+"type" sysfs files explained above.
+
+For further details consult Documentation/ABI/stable/sysfs-class-rfkill.
diff --git a/Documentation/driver-api/serial/cyclades_z.rst b/Documentation/driver-api/serial/cyclades_z.rst
new file mode 100644
index 000000000000..532ff67e2f1c
--- /dev/null
+++ b/Documentation/driver-api/serial/cyclades_z.rst
@@ -0,0 +1,11 @@
+================
+Cyclades-Z notes
+================
+
+The Cyclades-Z must have firmware loaded onto the card before it will
+operate. This operation should be performed during system startup,
+
+The firmware, loader program and the latest device driver code are
+available from Cyclades at
+
+ ftp://ftp.cyclades.com/pub/cyclades/cyclades-z/linux/
diff --git a/Documentation/driver-api/serial/driver.rst b/Documentation/driver-api/serial/driver.rst
new file mode 100644
index 000000000000..31bd4e16fb1f
--- /dev/null
+++ b/Documentation/driver-api/serial/driver.rst
@@ -0,0 +1,549 @@
+====================
+Low Level Serial API
+====================
+
+
+This document is meant as a brief overview of some aspects of the new serial
+driver. It is not complete, any questions you have should be directed to
+<rmk@arm.linux.org.uk>
+
+The reference implementation is contained within amba-pl011.c.
+
+
+
+Low Level Serial Hardware Driver
+--------------------------------
+
+The low level serial hardware driver is responsible for supplying port
+information (defined by uart_port) and a set of control methods (defined
+by uart_ops) to the core serial driver. The low level driver is also
+responsible for handling interrupts for the port, and providing any
+console support.
+
+
+Console Support
+---------------
+
+The serial core provides a few helper functions. This includes identifing
+the correct port structure (via uart_get_console) and decoding command line
+arguments (uart_parse_options).
+
+There is also a helper function (uart_console_write) which performs a
+character by character write, translating newlines to CRLF sequences.
+Driver writers are recommended to use this function rather than implementing
+their own version.
+
+
+Locking
+-------
+
+It is the responsibility of the low level hardware driver to perform the
+necessary locking using port->lock. There are some exceptions (which
+are described in the uart_ops listing below.)
+
+There are two locks. A per-port spinlock, and an overall semaphore.
+
+From the core driver perspective, the port->lock locks the following
+data::
+
+ port->mctrl
+ port->icount
+ port->state->xmit.head (circ_buf->head)
+ port->state->xmit.tail (circ_buf->tail)
+
+The low level driver is free to use this lock to provide any additional
+locking.
+
+The port_sem semaphore is used to protect against ports being added/
+removed or reconfigured at inappropriate times. Since v2.6.27, this
+semaphore has been the 'mutex' member of the tty_port struct, and
+commonly referred to as the port mutex.
+
+
+uart_ops
+--------
+
+The uart_ops structure is the main interface between serial_core and the
+hardware specific driver. It contains all the methods to control the
+hardware.
+
+ tx_empty(port)
+ This function tests whether the transmitter fifo and shifter
+ for the port described by 'port' is empty. If it is empty,
+ this function should return TIOCSER_TEMT, otherwise return 0.
+ If the port does not support this operation, then it should
+ return TIOCSER_TEMT.
+
+ Locking: none.
+
+ Interrupts: caller dependent.
+
+ This call must not sleep
+
+ set_mctrl(port, mctrl)
+ This function sets the modem control lines for port described
+ by 'port' to the state described by mctrl. The relevant bits
+ of mctrl are:
+
+ - TIOCM_RTS RTS signal.
+ - TIOCM_DTR DTR signal.
+ - TIOCM_OUT1 OUT1 signal.
+ - TIOCM_OUT2 OUT2 signal.
+ - TIOCM_LOOP Set the port into loopback mode.
+
+ If the appropriate bit is set, the signal should be driven
+ active. If the bit is clear, the signal should be driven
+ inactive.
+
+ Locking: port->lock taken.
+
+ Interrupts: locally disabled.
+
+ This call must not sleep
+
+ get_mctrl(port)
+ Returns the current state of modem control inputs. The state
+ of the outputs should not be returned, since the core keeps
+ track of their state. The state information should include:
+
+ - TIOCM_CAR state of DCD signal
+ - TIOCM_CTS state of CTS signal
+ - TIOCM_DSR state of DSR signal
+ - TIOCM_RI state of RI signal
+
+ The bit is set if the signal is currently driven active. If
+ the port does not support CTS, DCD or DSR, the driver should
+ indicate that the signal is permanently active. If RI is
+ not available, the signal should not be indicated as active.
+
+ Locking: port->lock taken.
+
+ Interrupts: locally disabled.
+
+ This call must not sleep
+
+ stop_tx(port)
+ Stop transmitting characters. This might be due to the CTS
+ line becoming inactive or the tty layer indicating we want
+ to stop transmission due to an XOFF character.
+
+ The driver should stop transmitting characters as soon as
+ possible.
+
+ Locking: port->lock taken.
+
+ Interrupts: locally disabled.
+
+ This call must not sleep
+
+ start_tx(port)
+ Start transmitting characters.
+
+ Locking: port->lock taken.
+
+ Interrupts: locally disabled.
+
+ This call must not sleep
+
+ throttle(port)
+ Notify the serial driver that input buffers for the line discipline are
+ close to full, and it should somehow signal that no more characters
+ should be sent to the serial port.
+ This will be called only if hardware assisted flow control is enabled.
+
+ Locking: serialized with .unthrottle() and termios modification by the
+ tty layer.
+
+ unthrottle(port)
+ Notify the serial driver that characters can now be sent to the serial
+ port without fear of overrunning the input buffers of the line
+ disciplines.
+
+ This will be called only if hardware assisted flow control is enabled.
+
+ Locking: serialized with .throttle() and termios modification by the
+ tty layer.
+
+ send_xchar(port,ch)
+ Transmit a high priority character, even if the port is stopped.
+ This is used to implement XON/XOFF flow control and tcflow(). If
+ the serial driver does not implement this function, the tty core
+ will append the character to the circular buffer and then call
+ start_tx() / stop_tx() to flush the data out.
+
+ Do not transmit if ch == '\0' (__DISABLED_CHAR).
+
+ Locking: none.
+
+ Interrupts: caller dependent.
+
+ stop_rx(port)
+ Stop receiving characters; the port is in the process of
+ being closed.
+
+ Locking: port->lock taken.
+
+ Interrupts: locally disabled.
+
+ This call must not sleep
+
+ enable_ms(port)
+ Enable the modem status interrupts.
+
+ This method may be called multiple times. Modem status
+ interrupts should be disabled when the shutdown method is
+ called.
+
+ Locking: port->lock taken.
+
+ Interrupts: locally disabled.
+
+ This call must not sleep
+
+ break_ctl(port,ctl)
+ Control the transmission of a break signal. If ctl is
+ nonzero, the break signal should be transmitted. The signal
+ should be terminated when another call is made with a zero
+ ctl.
+
+ Locking: caller holds tty_port->mutex
+
+ startup(port)
+ Grab any interrupt resources and initialise any low level driver
+ state. Enable the port for reception. It should not activate
+ RTS nor DTR; this will be done via a separate call to set_mctrl.
+
+ This method will only be called when the port is initially opened.
+
+ Locking: port_sem taken.
+
+ Interrupts: globally disabled.
+
+ shutdown(port)
+ Disable the port, disable any break condition that may be in
+ effect, and free any interrupt resources. It should not disable
+ RTS nor DTR; this will have already been done via a separate
+ call to set_mctrl.
+
+ Drivers must not access port->state once this call has completed.
+
+ This method will only be called when there are no more users of
+ this port.
+
+ Locking: port_sem taken.
+
+ Interrupts: caller dependent.
+
+ flush_buffer(port)
+ Flush any write buffers, reset any DMA state and stop any
+ ongoing DMA transfers.
+
+ This will be called whenever the port->state->xmit circular
+ buffer is cleared.
+
+ Locking: port->lock taken.
+
+ Interrupts: locally disabled.
+
+ This call must not sleep
+
+ set_termios(port,termios,oldtermios)
+ Change the port parameters, including word length, parity, stop
+ bits. Update read_status_mask and ignore_status_mask to indicate
+ the types of events we are interested in receiving. Relevant
+ termios->c_cflag bits are:
+
+ CSIZE
+ - word size
+ CSTOPB
+ - 2 stop bits
+ PARENB
+ - parity enable
+ PARODD
+ - odd parity (when PARENB is in force)
+ CREAD
+ - enable reception of characters (if not set,
+ still receive characters from the port, but
+ throw them away.
+ CRTSCTS
+ - if set, enable CTS status change reporting
+ CLOCAL
+ - if not set, enable modem status change
+ reporting.
+
+ Relevant termios->c_iflag bits are:
+
+ INPCK
+ - enable frame and parity error events to be
+ passed to the TTY layer.
+ BRKINT / PARMRK
+ - both of these enable break events to be
+ passed to the TTY layer.
+
+ IGNPAR
+ - ignore parity and framing errors
+ IGNBRK
+ - ignore break errors, If IGNPAR is also
+ set, ignore overrun errors as well.
+
+ The interaction of the iflag bits is as follows (parity error
+ given as an example):
+
+ =============== ======= ====== =============================
+ Parity error INPCK IGNPAR
+ =============== ======= ====== =============================
+ n/a 0 n/a character received, marked as
+ TTY_NORMAL
+ None 1 n/a character received, marked as
+ TTY_NORMAL
+ Yes 1 0 character received, marked as
+ TTY_PARITY
+ Yes 1 1 character discarded
+ =============== ======= ====== =============================
+
+ Other flags may be used (eg, xon/xoff characters) if your
+ hardware supports hardware "soft" flow control.
+
+ Locking: caller holds tty_port->mutex
+
+ Interrupts: caller dependent.
+
+ This call must not sleep
+
+ set_ldisc(port,termios)
+ Notifier for discipline change. See Documentation/driver-api/serial/tty.rst.
+
+ Locking: caller holds tty_port->mutex
+
+ pm(port,state,oldstate)
+ Perform any power management related activities on the specified
+ port. State indicates the new state (defined by
+ enum uart_pm_state), oldstate indicates the previous state.
+
+ This function should not be used to grab any resources.
+
+ This will be called when the port is initially opened and finally
+ closed, except when the port is also the system console. This
+ will occur even if CONFIG_PM is not set.
+
+ Locking: none.
+
+ Interrupts: caller dependent.
+
+ type(port)
+ Return a pointer to a string constant describing the specified
+ port, or return NULL, in which case the string 'unknown' is
+ substituted.
+
+ Locking: none.
+
+ Interrupts: caller dependent.
+
+ release_port(port)
+ Release any memory and IO region resources currently in use by
+ the port.
+
+ Locking: none.
+
+ Interrupts: caller dependent.
+
+ request_port(port)
+ Request any memory and IO region resources required by the port.
+ If any fail, no resources should be registered when this function
+ returns, and it should return -EBUSY on failure.
+
+ Locking: none.
+
+ Interrupts: caller dependent.
+
+ config_port(port,type)
+ Perform any autoconfiguration steps required for the port. `type`
+ contains a bit mask of the required configuration. UART_CONFIG_TYPE
+ indicates that the port requires detection and identification.
+ port->type should be set to the type found, or PORT_UNKNOWN if
+ no port was detected.
+
+ UART_CONFIG_IRQ indicates autoconfiguration of the interrupt signal,
+ which should be probed using standard kernel autoprobing techniques.
+ This is not necessary on platforms where ports have interrupts
+ internally hard wired (eg, system on a chip implementations).
+
+ Locking: none.
+
+ Interrupts: caller dependent.
+
+ verify_port(port,serinfo)
+ Verify the new serial port information contained within serinfo is
+ suitable for this port type.
+
+ Locking: none.
+
+ Interrupts: caller dependent.
+
+ ioctl(port,cmd,arg)
+ Perform any port specific IOCTLs. IOCTL commands must be defined
+ using the standard numbering system found in <asm/ioctl.h>
+
+ Locking: none.
+
+ Interrupts: caller dependent.
+
+ poll_init(port)
+ Called by kgdb to perform the minimal hardware initialization needed
+ to support poll_put_char() and poll_get_char(). Unlike ->startup()
+ this should not request interrupts.
+
+ Locking: tty_mutex and tty_port->mutex taken.
+
+ Interrupts: n/a.
+
+ poll_put_char(port,ch)
+ Called by kgdb to write a single character directly to the serial
+ port. It can and should block until there is space in the TX FIFO.
+
+ Locking: none.
+
+ Interrupts: caller dependent.
+
+ This call must not sleep
+
+ poll_get_char(port)
+ Called by kgdb to read a single character directly from the serial
+ port. If data is available, it should be returned; otherwise
+ the function should return NO_POLL_CHAR immediately.
+
+ Locking: none.
+
+ Interrupts: caller dependent.
+
+ This call must not sleep
+
+Other functions
+---------------
+
+uart_update_timeout(port,cflag,baud)
+ Update the FIFO drain timeout, port->timeout, according to the
+ number of bits, parity, stop bits and baud rate.
+
+ Locking: caller is expected to take port->lock
+
+ Interrupts: n/a
+
+uart_get_baud_rate(port,termios,old,min,max)
+ Return the numeric baud rate for the specified termios, taking
+ account of the special 38400 baud "kludge". The B0 baud rate
+ is mapped to 9600 baud.
+
+ If the baud rate is not within min..max, then if old is non-NULL,
+ the original baud rate will be tried. If that exceeds the
+ min..max constraint, 9600 baud will be returned. termios will
+ be updated to the baud rate in use.
+
+ Note: min..max must always allow 9600 baud to be selected.
+
+ Locking: caller dependent.
+
+ Interrupts: n/a
+
+uart_get_divisor(port,baud)
+ Return the divisor (baud_base / baud) for the specified baud
+ rate, appropriately rounded.
+
+ If 38400 baud and custom divisor is selected, return the
+ custom divisor instead.
+
+ Locking: caller dependent.
+
+ Interrupts: n/a
+
+uart_match_port(port1,port2)
+ This utility function can be used to determine whether two
+ uart_port structures describe the same port.
+
+ Locking: n/a
+
+ Interrupts: n/a
+
+uart_write_wakeup(port)
+ A driver is expected to call this function when the number of
+ characters in the transmit buffer have dropped below a threshold.
+
+ Locking: port->lock should be held.
+
+ Interrupts: n/a
+
+uart_register_driver(drv)
+ Register a uart driver with the core driver. We in turn register
+ with the tty layer, and initialise the core driver per-port state.
+
+ drv->port should be NULL, and the per-port structures should be
+ registered using uart_add_one_port after this call has succeeded.
+
+ Locking: none
+
+ Interrupts: enabled
+
+uart_unregister_driver()
+ Remove all references to a driver from the core driver. The low
+ level driver must have removed all its ports via the
+ uart_remove_one_port() if it registered them with uart_add_one_port().
+
+ Locking: none
+
+ Interrupts: enabled
+
+**uart_suspend_port()**
+
+**uart_resume_port()**
+
+**uart_add_one_port()**
+
+**uart_remove_one_port()**
+
+Other notes
+-----------
+
+It is intended some day to drop the 'unused' entries from uart_port, and
+allow low level drivers to register their own individual uart_port's with
+the core. This will allow drivers to use uart_port as a pointer to a
+structure containing both the uart_port entry with their own extensions,
+thus::
+
+ struct my_port {
+ struct uart_port port;
+ int my_stuff;
+ };
+
+Modem control lines via GPIO
+----------------------------
+
+Some helpers are provided in order to set/get modem control lines via GPIO.
+
+mctrl_gpio_init(port, idx):
+ This will get the {cts,rts,...}-gpios from device tree if they are
+ present and request them, set direction etc, and return an
+ allocated structure. `devm_*` functions are used, so there's no need
+ to call mctrl_gpio_free().
+ As this sets up the irq handling make sure to not handle changes to the
+ gpio input lines in your driver, too.
+
+mctrl_gpio_free(dev, gpios):
+ This will free the requested gpios in mctrl_gpio_init().
+ As `devm_*` functions are used, there's generally no need to call
+ this function.
+
+mctrl_gpio_to_gpiod(gpios, gidx)
+ This returns the gpio_desc structure associated to the modem line
+ index.
+
+mctrl_gpio_set(gpios, mctrl):
+ This will sets the gpios according to the mctrl state.
+
+mctrl_gpio_get(gpios, mctrl):
+ This will update mctrl with the gpios values.
+
+mctrl_gpio_enable_ms(gpios):
+ Enables irqs and handling of changes to the ms lines.
+
+mctrl_gpio_disable_ms(gpios):
+ Disables irqs and handling of changes to the ms lines.
diff --git a/Documentation/driver-api/serial/index.rst b/Documentation/driver-api/serial/index.rst
new file mode 100644
index 000000000000..33ad10d05b26
--- /dev/null
+++ b/Documentation/driver-api/serial/index.rst
@@ -0,0 +1,32 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+==========================
+Support for Serial devices
+==========================
+
+.. toctree::
+ :maxdepth: 1
+
+
+ driver
+ tty
+
+Serial drivers
+==============
+
+.. toctree::
+ :maxdepth: 1
+
+ cyclades_z
+ moxa-smartio
+ n_gsm
+ rocket
+ serial-iso7816
+ serial-rs485
+
+.. only:: subproject and html
+
+ Indices
+ =======
+
+ * :ref:`genindex`
diff --git a/Documentation/driver-api/serial/moxa-smartio.rst b/Documentation/driver-api/serial/moxa-smartio.rst
new file mode 100644
index 000000000000..156100f17c3f
--- /dev/null
+++ b/Documentation/driver-api/serial/moxa-smartio.rst
@@ -0,0 +1,615 @@
+=============================================================
+MOXA Smartio/Industio Family Device Driver Installation Guide
+=============================================================
+
+.. note::
+
+ This file is outdated. It needs some care in order to make it
+ updated to Kernel 5.0 and upper
+
+Copyright (C) 2008, Moxa Inc.
+
+Date: 01/21/2008
+
+.. Content
+
+ 1. Introduction
+ 2. System Requirement
+ 3. Installation
+ 3.1 Hardware installation
+ 3.2 Driver files
+ 3.3 Device naming convention
+ 3.4 Module driver configuration
+ 3.5 Static driver configuration for Linux kernel 2.4.x and 2.6.x.
+ 3.6 Custom configuration
+ 3.7 Verify driver installation
+ 4. Utilities
+ 5. Setserial
+ 6. Troubleshooting
+
+1. Introduction
+^^^^^^^^^^^^^^^
+
+ The Smartio/Industio/UPCI family Linux driver supports following multiport
+ boards.
+
+ - 2 ports multiport board
+ CP-102U, CP-102UL, CP-102UF
+ CP-132U-I, CP-132UL,
+ CP-132, CP-132I, CP132S, CP-132IS,
+ CI-132, CI-132I, CI-132IS,
+ (C102H, C102HI, C102HIS, C102P, CP-102, CP-102S)
+
+ - 4 ports multiport board
+ CP-104EL,
+ CP-104UL, CP-104JU,
+ CP-134U, CP-134U-I,
+ C104H/PCI, C104HS/PCI,
+ CP-114, CP-114I, CP-114S, CP-114IS, CP-114UL,
+ C104H, C104HS,
+ CI-104J, CI-104JS,
+ CI-134, CI-134I, CI-134IS,
+ (C114HI, CT-114I, C104P),
+ POS-104UL,
+ CB-114,
+ CB-134I
+
+ - 8 ports multiport board
+ CP-118EL, CP-168EL,
+ CP-118U, CP-168U,
+ C168H/PCI,
+ C168H, C168HS,
+ (C168P),
+ CB-108
+
+ This driver and installation procedure have been developed upon Linux Kernel
+ 2.4.x and 2.6.x. This driver supports Intel x86 hardware platform. In order
+ to maintain compatibility, this version has also been properly tested with
+ RedHat, Mandrake, Fedora and S.u.S.E Linux. However, if compatibility problem
+ occurs, please contact Moxa at support@moxa.com.tw.
+
+ In addition to device driver, useful utilities are also provided in this
+ version. They are:
+
+ - msdiag
+ Diagnostic program for displaying installed Moxa
+ Smartio/Industio boards.
+ - msmon
+ Monitor program to observe data count and line status signals.
+ - msterm A simple terminal program which is useful in testing serial
+ ports.
+ - io-irq.exe
+ Configuration program to setup ISA boards. Please note that
+ this program can only be executed under DOS.
+
+ All the drivers and utilities are published in form of source code under
+ GNU General Public License in this version. Please refer to GNU General
+ Public License announcement in each source code file for more detail.
+
+ In Moxa's Web sites, you may always find latest driver at http://www.moxa.com/.
+
+ This version of driver can be installed as Loadable Module (Module driver)
+ or built-in into kernel (Static driver). You may refer to following
+ installation procedure for suitable one. Before you install the driver,
+ please refer to hardware installation procedure in the User's Manual.
+
+ We assume the user should be familiar with following documents.
+
+ - Serial-HOWTO
+ - Kernel-HOWTO
+
+2. System Requirement
+^^^^^^^^^^^^^^^^^^^^^
+
+ - Hardware platform: Intel x86 machine
+ - Kernel version: 2.4.x or 2.6.x
+ - gcc version 2.72 or later
+ - Maximum 4 boards can be installed in combination
+
+3. Installation
+^^^^^^^^^^^^^^^
+
+3.1 Hardware installation
+=========================
+
+ There are two types of buses, ISA and PCI, for Smartio/Industio
+ family multiport board.
+
+ISA board
+---------
+
+ You'll have to configure CAP address, I/O address, Interrupt Vector
+ as well as IRQ before installing this driver. Please refer to hardware
+ installation procedure in User's Manual before proceed any further.
+ Please make sure the JP1 is open after the ISA board is set properly.
+
+PCI/UPCI board
+--------------
+
+ You may need to adjust IRQ usage in BIOS to avoid from IRQ conflict
+ with other ISA devices. Please refer to hardware installation
+ procedure in User's Manual in advance.
+
+PCI IRQ Sharing
+---------------
+
+ Each port within the same multiport board shares the same IRQ. Up to
+ 4 Moxa Smartio/Industio PCI Family multiport boards can be installed
+ together on one system and they can share the same IRQ.
+
+
+3.2 Driver files
+================
+
+ The driver file may be obtained from ftp, CD-ROM or floppy disk. The
+ first step, anyway, is to copy driver file "mxser.tgz" into specified
+ directory. e.g. /moxa. The execute commands as below::
+
+ # cd /
+ # mkdir moxa
+ # cd /moxa
+ # tar xvf /dev/fd0
+
+or::
+
+ # cd /
+ # mkdir moxa
+ # cd /moxa
+ # cp /mnt/cdrom/<driver directory>/mxser.tgz .
+ # tar xvfz mxser.tgz
+
+
+3.3 Device naming convention
+============================
+
+ You may find all the driver and utilities files in /moxa/mxser.
+ Following installation procedure depends on the model you'd like to
+ run the driver. If you prefer module driver, please refer to 3.4.
+ If static driver is required, please refer to 3.5.
+
+Dialin and callout port
+-----------------------
+
+ This driver remains traditional serial device properties. There are
+ two special file name for each serial port. One is dial-in port
+ which is named "ttyMxx". For callout port, the naming convention
+ is "cumxx".
+
+Device naming when more than 2 boards installed
+-----------------------------------------------
+
+ Naming convention for each Smartio/Industio multiport board is
+ pre-defined as below.
+
+ ============ =============== ==============
+ Board Num. Dial-in Port Callout port
+ 1st board ttyM0 - ttyM7 cum0 - cum7
+ 2nd board ttyM8 - ttyM15 cum8 - cum15
+ 3rd board ttyM16 - ttyM23 cum16 - cum23
+ 4th board ttyM24 - ttym31 cum24 - cum31
+ ============ =============== ==============
+
+.. note::
+
+ Under Kernel 2.6 and upper, the cum Device is Obsolete. So use ttyM*
+ device instead.
+
+Board sequence
+--------------
+
+ This driver will activate ISA boards according to the parameter set
+ in the driver. After all specified ISA board activated, PCI board
+ will be installed in the system automatically driven.
+ Therefore the board number is sorted by the CAP address of ISA boards.
+ For PCI boards, their sequence will be after ISA boards and C168H/PCI
+ has higher priority than C104H/PCI boards.
+
+3.4 Module driver configuration
+===============================
+
+ Module driver is easiest way to install. If you prefer static driver
+ installation, please skip this paragraph.
+
+
+ ------------- Prepare to use the MOXA driver --------------------
+
+3.4.1 Create tty device with correct major number
+-------------------------------------------------
+
+ Before using MOXA driver, your system must have the tty devices
+ which are created with driver's major number. We offer one shell
+ script "msmknod" to simplify the procedure.
+ This step is only needed to be executed once. But you still
+ need to do this procedure when:
+
+ a. You change the driver's major number. Please refer the "3.7"
+ section.
+ b. Your total installed MOXA boards number is changed. Maybe you
+ add/delete one MOXA board.
+ c. You want to change the tty name. This needs to modify the
+ shell script "msmknod"
+
+ The procedure is::
+
+ # cd /moxa/mxser/driver
+ # ./msmknod
+
+ This shell script will require the major number for dial-in
+ device and callout device to create tty device. You also need
+ to specify the total installed MOXA board number. Default major
+ numbers for dial-in device and callout device are 30, 35. If
+ you need to change to other number, please refer section "3.7"
+ for more detailed procedure.
+ Msmknod will delete any special files occupying the same device
+ naming.
+
+3.4.2 Build the MOXA driver and utilities
+-----------------------------------------
+
+ Before using the MOXA driver and utilities, you need compile the
+ all the source code. This step is only need to be executed once.
+ But you still re-compile the source code if you modify the source
+ code. For example, if you change the driver's major number (see
+ "3.7" section), then you need to do this step again.
+
+ Find "Makefile" in /moxa/mxser, then run
+
+ # make clean; make install
+
+ ..note::
+
+ For Red Hat 9, Red Hat Enterprise Linux AS3/ES3/WS3 & Fedora Core1:
+ # make clean; make installsp1
+
+ For Red Hat Enterprise Linux AS4/ES4/WS4:
+ # make clean; make installsp2
+
+ The driver files "mxser.o" and utilities will be properly compiled
+ and copied to system directories respectively.
+
+------------- Load MOXA driver--------------------
+
+3.4.3 Load the MOXA driver
+--------------------------
+
+ ::
+
+ # modprobe mxser <argument>
+
+ will activate the module driver. You may run "lsmod" to check
+ if "mxser" is activated. If the MOXA board is ISA board, the
+ <argument> is needed. Please refer to section "3.4.5" for more
+ information.
+
+------------- Load MOXA driver on boot --------------------
+
+3.4.4 Load the mxser driver
+---------------------------
+
+
+ For the above description, you may manually execute
+ "modprobe mxser" to activate this driver and run
+ "rmmod mxser" to remove it.
+
+ However, it's better to have a boot time configuration to
+ eliminate manual operation. Boot time configuration can be
+ achieved by rc file. We offer one "rc.mxser" file to simplify
+ the procedure under "moxa/mxser/driver".
+
+ But if you use ISA board, please modify the "modprobe ..." command
+ to add the argument (see "3.4.5" section). After modifying the
+ rc.mxser, please try to execute "/moxa/mxser/driver/rc.mxser"
+ manually to make sure the modification is ok. If any error
+ encountered, please try to modify again. If the modification is
+ completed, follow the below step.
+
+ Run following command for setting rc files::
+
+ # cd /moxa/mxser/driver
+ # cp ./rc.mxser /etc/rc.d
+ # cd /etc/rc.d
+
+ Check "rc.serial" is existed or not. If "rc.serial" doesn't exist,
+ create it by vi, run "chmod 755 rc.serial" to change the permission.
+
+ Add "/etc/rc.d/rc.mxser" in last line.
+
+ Reboot and check if moxa.o activated by "lsmod" command.
+
+3.4.5. specify CAP address
+--------------------------
+
+ If you'd like to drive Smartio/Industio ISA boards in the system,
+ you'll have to add parameter to specify CAP address of given
+ board while activating "mxser.o". The format for parameters are
+ as follows.::
+
+ modprobe mxser ioaddr=0x???,0x???,0x???,0x???
+ | | | |
+ | | | +- 4th ISA board
+ | | +------ 3rd ISA board
+ | +------------ 2nd ISA board
+ +-------------------1st ISA board
+
+3.5 Static driver configuration for Linux kernel 2.4.x and 2.6.x
+================================================================
+
+ Note:
+ To use static driver, you must install the linux kernel
+ source package.
+
+3.5.1 Backup the built-in driver in the kernel
+----------------------------------------------
+
+ ::
+
+ # cd /usr/src/linux/drivers/char
+ # mv mxser.c mxser.c.old
+
+ For Red Hat 7.x user, you need to create link:
+ # cd /usr/src
+ # ln -s linux-2.4 linux
+
+3.5.2 Create link
+-----------------
+ ::
+
+ # cd /usr/src/linux/drivers/char
+ # ln -s /moxa/mxser/driver/mxser.c mxser.c
+
+3.5.3 Add CAP address list for ISA boards.
+------------------------------------------
+
+ For PCI boards user, please skip this step.
+
+ In module mode, the CAP address for ISA board is given by
+ parameter. In static driver configuration, you'll have to
+ assign it within driver's source code. If you will not
+ install any ISA boards, you may skip to next portion.
+ The instructions to modify driver source code are as
+ below.
+
+ a. run::
+
+ # cd /moxa/mxser/driver
+ # vi mxser.c
+
+ b. Find the array mxserBoardCAP[] as below::
+
+ static int mxserBoardCAP[] = {0x00, 0x00, 0x00, 0x00};
+
+ c. Change the address within this array using vi. For
+ example, to driver 2 ISA boards with CAP address
+ 0x280 and 0x180 as 1st and 2nd board. Just to change
+ the source code as follows::
+
+ static int mxserBoardCAP[] = {0x280, 0x180, 0x00, 0x00};
+
+3.5.4 Setup kernel configuration
+--------------------------------
+
+ Configure the kernel::
+
+ # cd /usr/src/linux
+ # make menuconfig
+
+ You will go into a menu-driven system. Please select [Character
+ devices][Non-standard serial port support], enable the [Moxa
+ SmartIO support] driver with "[*]" for built-in (not "[M]"), then
+ select [Exit] to exit this program.
+
+3.5.5 Rebuild kernel
+--------------------
+
+ The following are for Linux kernel rebuilding, for your
+ reference only.
+
+ For appropriate details, please refer to the Linux document:
+
+ a. Run the following commands::
+
+ cd /usr/src/linux
+ make clean # take a few minutes
+ make dep # take a few minutes
+ make bzImage # take probably 10-20 minutes
+ make install # copy boot image to correct position
+
+ f. Please make sure the boot kernel (vmlinuz) is in the
+ correct position.
+ g. If you use 'lilo' utility, you should check /etc/lilo.conf
+ 'image' item specified the path which is the 'vmlinuz' path,
+ or you will load wrong (or old) boot kernel image (vmlinuz).
+ After checking /etc/lilo.conf, please run "lilo".
+
+ Note that if the result of "make bzImage" is ERROR, then you have to
+ go back to Linux configuration Setup. Type "make menuconfig" in
+ directory /usr/src/linux.
+
+
+3.5.6 Make tty device and special file
+--------------------------------------
+
+ ::
+ # cd /moxa/mxser/driver
+ # ./msmknod
+
+3.5.7 Make utility
+------------------
+
+ ::
+
+ # cd /moxa/mxser/utility
+ # make clean; make install
+
+3.5.8 Reboot
+------------
+
+
+
+3.6 Custom configuration
+========================
+
+ Although this driver already provides you default configuration, you
+ still can change the device name and major number. The instruction to
+ change these parameters are shown as below.
+
+a. Change Device name
+
+ If you'd like to use other device names instead of default naming
+ convention, all you have to do is to modify the internal code
+ within the shell script "msmknod". First, you have to open "msmknod"
+ by vi. Locate each line contains "ttyM" and "cum" and change them
+ to the device name you desired. "msmknod" creates the device names
+ you need next time executed.
+
+b. Change Major number
+
+ If major number 30 and 35 had been occupied, you may have to select
+ 2 free major numbers for this driver. There are 3 steps to change
+ major numbers.
+
+3.6.1 Find free major numbers
+-----------------------------
+
+ In /proc/devices, you may find all the major numbers occupied
+ in the system. Please select 2 major numbers that are available.
+ e.g. 40, 45.
+
+3.6.2 Create special files
+--------------------------
+
+ Run /moxa/mxser/driver/msmknod to create special files with
+ specified major numbers.
+
+3.6.3 Modify driver with new major number
+-----------------------------------------
+
+ Run vi to open /moxa/mxser/driver/mxser.c. Locate the line
+ contains "MXSERMAJOR". Change the content as below::
+
+ #define MXSERMAJOR 40
+ #define MXSERCUMAJOR 45
+
+ 3.6.4 Run "make clean; make install" in /moxa/mxser/driver.
+
+3.7 Verify driver installation
+==============================
+
+ You may refer to /var/log/messages to check the latest status
+ log reported by this driver whenever it's activated.
+
+4. Utilities
+^^^^^^^^^^^^
+
+ There are 3 utilities contained in this driver. They are msdiag, msmon and
+ msterm. These 3 utilities are released in form of source code. They should
+ be compiled into executable file and copied into /usr/bin.
+
+ Before using these utilities, please load driver (refer 3.4 & 3.5) and
+ make sure you had run the "msmknod" utility.
+
+msdiag - Diagnostic
+===================
+
+ This utility provides the function to display what Moxa Smartio/Industio
+ board found by driver in the system.
+
+msmon - Port Monitoring
+=======================
+
+ This utility gives the user a quick view about all the MOXA ports'
+ activities. One can easily learn each port's total received/transmitted
+ (Rx/Tx) character count since the time when the monitoring is started.
+
+ Rx/Tx throughputs per second are also reported in interval basis (e.g.
+ the last 5 seconds) and in average basis (since the time the monitoring
+ is started). You can reset all ports' count by <HOME> key. <+> <->
+ (plus/minus) keys to change the displaying time interval. Press <ENTER>
+ on the port, that cursor stay, to view the port's communication
+ parameters, signal status, and input/output queue.
+
+msterm - Terminal Emulation
+===========================
+
+ This utility provides data sending and receiving ability of all tty ports,
+ especially for MOXA ports. It is quite useful for testing simple
+ application, for example, sending AT command to a modem connected to the
+ port or used as a terminal for login purpose. Note that this is only a
+ dumb terminal emulation without handling full screen operation.
+
+5. Setserial
+^^^^^^^^^^^^
+
+ Supported Setserial parameters are listed as below.
+
+ ============== =========================================================
+ uart set UART type(16450-->disable FIFO, 16550A-->enable FIFO)
+ close_delay set the amount of time(in 1/100 of a second) that DTR
+ should be kept low while being closed.
+ closing_wait set the amount of time(in 1/100 of a second) that the
+ serial port should wait for data to be drained while
+ being closed, before the receiver is disable.
+ spd_hi Use 57.6kb when the application requests 38.4kb.
+ spd_vhi Use 115.2kb when the application requests 38.4kb.
+ spd_shi Use 230.4kb when the application requests 38.4kb.
+ spd_warp Use 460.8kb when the application requests 38.4kb.
+ spd_normal Use 38.4kb when the application requests 38.4kb.
+ spd_cust Use the custom divisor to set the speed when the
+ application requests 38.4kb.
+ divisor This option set the custom division.
+ baud_base This option set the base baud rate.
+ ============== =========================================================
+
+6. Troubleshooting
+^^^^^^^^^^^^^^^^^^
+
+ The boot time error messages and solutions are stated as clearly as
+ possible. If all the possible solutions fail, please contact our technical
+ support team to get more help.
+
+
+ Error msg:
+ More than 4 Moxa Smartio/Industio family boards found. Fifth board
+ and after are ignored.
+
+ Solution:
+ To avoid this problem, please unplug fifth and after board, because Moxa
+ driver supports up to 4 boards.
+
+ Error msg:
+ Request_irq fail, IRQ(?) may be conflict with another device.
+
+ Solution:
+ Other PCI or ISA devices occupy the assigned IRQ. If you are not sure
+ which device causes the situation, please check /proc/interrupts to find
+ free IRQ and simply change another free IRQ for Moxa board.
+
+ Error msg:
+ Board #: C1xx Series(CAP=xxx) interrupt number invalid.
+
+ Solution:
+ Each port within the same multiport board shares the same IRQ. Please set
+ one IRQ (IRQ doesn't equal to zero) for one Moxa board.
+
+ Error msg:
+ No interrupt vector be set for Moxa ISA board(CAP=xxx).
+
+ Solution:
+ Moxa ISA board needs an interrupt vector.Please refer to user's manual
+ "Hardware Installation" chapter to set interrupt vector.
+
+ Error msg:
+ Couldn't install MOXA Smartio/Industio family driver!
+
+ Solution:
+ Load Moxa driver fail, the major number may conflict with other devices.
+ Please refer to previous section 3.7 to change a free major number for
+ Moxa driver.
+
+ Error msg:
+ Couldn't install MOXA Smartio/Industio family callout driver!
+
+ Solution:
+ Load Moxa callout driver fail, the callout device major number may
+ conflict with other devices. Please refer to previous section 3.7 to
+ change a free callout device major number for Moxa driver.
diff --git a/Documentation/driver-api/serial/n_gsm.rst b/Documentation/driver-api/serial/n_gsm.rst
new file mode 100644
index 000000000000..f3ad9fd26408
--- /dev/null
+++ b/Documentation/driver-api/serial/n_gsm.rst
@@ -0,0 +1,103 @@
+==============================
+GSM 0710 tty multiplexor HOWTO
+==============================
+
+This line discipline implements the GSM 07.10 multiplexing protocol
+detailed in the following 3GPP document:
+
+ http://www.3gpp.org/ftp/Specs/archive/07_series/07.10/0710-720.zip
+
+This document give some hints on how to use this driver with GPRS and 3G
+modems connected to a physical serial port.
+
+How to use it
+-------------
+1. initialize the modem in 0710 mux mode (usually AT+CMUX= command) through
+ its serial port. Depending on the modem used, you can pass more or less
+ parameters to this command,
+2. switch the serial line to using the n_gsm line discipline by using
+ TIOCSETD ioctl,
+3. configure the mux using GSMIOC_GETCONF / GSMIOC_SETCONF ioctl,
+
+Major parts of the initialization program :
+(a good starting point is util-linux-ng/sys-utils/ldattach.c)::
+
+ #include <linux/gsmmux.h>
+ #define N_GSM0710 21 /* GSM 0710 Mux */
+ #define DEFAULT_SPEED B115200
+ #define SERIAL_PORT /dev/ttyS0
+
+ int ldisc = N_GSM0710;
+ struct gsm_config c;
+ struct termios configuration;
+
+ /* open the serial port connected to the modem */
+ fd = open(SERIAL_PORT, O_RDWR | O_NOCTTY | O_NDELAY);
+
+ /* configure the serial port : speed, flow control ... */
+
+ /* send the AT commands to switch the modem to CMUX mode
+ and check that it's successful (should return OK) */
+ write(fd, "AT+CMUX=0\r", 10);
+
+ /* experience showed that some modems need some time before
+ being able to answer to the first MUX packet so a delay
+ may be needed here in some case */
+ sleep(3);
+
+ /* use n_gsm line discipline */
+ ioctl(fd, TIOCSETD, &ldisc);
+
+ /* get n_gsm configuration */
+ ioctl(fd, GSMIOC_GETCONF, &c);
+ /* we are initiator and need encoding 0 (basic) */
+ c.initiator = 1;
+ c.encapsulation = 0;
+ /* our modem defaults to a maximum size of 127 bytes */
+ c.mru = 127;
+ c.mtu = 127;
+ /* set the new configuration */
+ ioctl(fd, GSMIOC_SETCONF, &c);
+
+ /* and wait for ever to keep the line discipline enabled */
+ daemon(0,0);
+ pause();
+
+4. create the devices corresponding to the "virtual" serial ports (take care,
+ each modem has its configuration and some DLC have dedicated functions,
+ for example GPS), starting with minor 1 (DLC0 is reserved for the management
+ of the mux)::
+
+ MAJOR=`cat /proc/devices |grep gsmtty | awk '{print $1}`
+ for i in `seq 1 4`; do
+ mknod /dev/ttygsm$i c $MAJOR $i
+ done
+
+5. use these devices as plain serial ports.
+
+ for example, it's possible:
+
+ - and to use gnokii to send / receive SMS on ttygsm1
+ - to use ppp to establish a datalink on ttygsm2
+
+6. first close all virtual ports before closing the physical port.
+
+ Note that after closing the physical port the modem is still in multiplexing
+ mode. This may prevent a successful re-opening of the port later. To avoid
+ this situation either reset the modem if your hardware allows that or send
+ a disconnect command frame manually before initializing the multiplexing mode
+ for the second time. The byte sequence for the disconnect command frame is::
+
+ 0xf9, 0x03, 0xef, 0x03, 0xc3, 0x16, 0xf9.
+
+Additional Documentation
+------------------------
+More practical details on the protocol and how it's supported by industrial
+modems can be found in the following documents :
+
+- http://www.telit.com/module/infopool/download.php?id=616
+- http://www.u-blox.com/images/downloads/Product_Docs/LEON-G100-G200-MuxImplementation_ApplicationNote_%28GSM%20G1-CS-10002%29.pdf
+- http://www.sierrawireless.com/Support/Downloads/AirPrime/WMP_Series/~/media/Support_Downloads/AirPrime/Application_notes/CMUX_Feature_Application_Note-Rev004.ashx
+- http://wm.sim.com/sim/News/photo/2010721161442.pdf
+
+11-03-08 - Eric Bénard - <eric@eukrea.com>
diff --git a/Documentation/driver-api/serial/rocket.rst b/Documentation/driver-api/serial/rocket.rst
new file mode 100644
index 000000000000..23761eae4282
--- /dev/null
+++ b/Documentation/driver-api/serial/rocket.rst
@@ -0,0 +1,185 @@
+================================================
+Comtrol(tm) RocketPort(R)/RocketModem(TM) Series
+================================================
+
+Device Driver for the Linux Operating System
+============================================
+
+Product overview
+----------------
+
+This driver provides a loadable kernel driver for the Comtrol RocketPort
+and RocketModem PCI boards. These boards provide, 2, 4, 8, 16, or 32
+high-speed serial ports or modems. This driver supports up to a combination
+of four RocketPort or RocketModems boards in one machine simultaneously.
+This file assumes that you are using the RocketPort driver which is
+integrated into the kernel sources.
+
+The driver can also be installed as an external module using the usual
+"make;make install" routine. This external module driver, obtainable
+from the Comtrol website listed below, is useful for updating the driver
+or installing it into kernels which do not have the driver configured
+into them. Installations instructions for the external module
+are in the included README and HW_INSTALL files.
+
+RocketPort ISA and RocketModem II PCI boards currently are only supported by
+this driver in module form.
+
+The RocketPort ISA board requires I/O ports to be configured by the DIP
+switches on the board. See the section "ISA Rocketport Boards" below for
+information on how to set the DIP switches.
+
+You pass the I/O port to the driver using the following module parameters:
+
+board1:
+ I/O port for the first ISA board
+board2:
+ I/O port for the second ISA board
+board3:
+ I/O port for the third ISA board
+board4:
+ I/O port for the fourth ISA board
+
+There is a set of utilities and scripts provided with the external driver
+(downloadable from http://www.comtrol.com) that ease the configuration and
+setup of the ISA cards.
+
+The RocketModem II PCI boards require firmware to be loaded into the card
+before it will function. The driver has only been tested as a module for this
+board.
+
+Installation Procedures
+-----------------------
+
+RocketPort/RocketModem PCI cards require no driver configuration, they are
+automatically detected and configured.
+
+The RocketPort driver can be installed as a module (recommended) or built
+into the kernel. This is selected, as for other drivers, through the `make config`
+command from the root of the Linux source tree during the kernel build process.
+
+The RocketPort/RocketModem serial ports installed by this driver are assigned
+device major number 46, and will be named /dev/ttyRx, where x is the port number
+starting at zero (ex. /dev/ttyR0, /devttyR1, ...). If you have multiple cards
+installed in the system, the mapping of port names to serial ports is displayed
+in the system log at /var/log/messages.
+
+If installed as a module, the module must be loaded. This can be done
+manually by entering "modprobe rocket". To have the module loaded automatically
+upon system boot, edit a `/etc/modprobe.d/*.conf` file and add the line
+"alias char-major-46 rocket".
+
+In order to use the ports, their device names (nodes) must be created with mknod.
+This is only required once, the system will retain the names once created. To
+create the RocketPort/RocketModem device names, use the command
+"mknod /dev/ttyRx c 46 x" where x is the port number starting at zero.
+
+For example::
+
+ > mknod /dev/ttyR0 c 46 0
+ > mknod /dev/ttyR1 c 46 1
+ > mknod /dev/ttyR2 c 46 2
+
+The Linux script MAKEDEV will create the first 16 ttyRx device names (nodes)
+for you::
+
+ >/dev/MAKEDEV ttyR
+
+ISA Rocketport Boards
+---------------------
+
+You must assign and configure the I/O addresses used by the ISA Rocketport
+card before installing and using it. This is done by setting a set of DIP
+switches on the Rocketport board.
+
+
+Setting the I/O address
+-----------------------
+
+Before installing RocketPort(R) or RocketPort RA boards, you must find
+a range of I/O addresses for it to use. The first RocketPort card
+requires a 68-byte contiguous block of I/O addresses, starting at one
+of the following: 0x100h, 0x140h, 0x180h, 0x200h, 0x240h, 0x280h,
+0x300h, 0x340h, 0x380h. This I/O address must be reflected in the DIP
+switches of *all* of the Rocketport cards.
+
+The second, third, and fourth RocketPort cards require a 64-byte
+contiguous block of I/O addresses, starting at one of the following
+I/O addresses: 0x100h, 0x140h, 0x180h, 0x1C0h, 0x200h, 0x240h, 0x280h,
+0x2C0h, 0x300h, 0x340h, 0x380h, 0x3C0h. The I/O address used by the
+second, third, and fourth Rocketport cards (if present) are set via
+software control. The DIP switch settings for the I/O address must be
+set to the value of the first Rocketport cards.
+
+In order to distinguish each of the card from the others, each card
+must have a unique board ID set on the dip switches. The first
+Rocketport board must be set with the DIP switches corresponding to
+the first board, the second board must be set with the DIP switches
+corresponding to the second board, etc. IMPORTANT: The board ID is
+the only place where the DIP switch settings should differ between the
+various Rocketport boards in a system.
+
+The I/O address range used by any of the RocketPort cards must not
+conflict with any other cards in the system, including other
+RocketPort cards. Below, you will find a list of commonly used I/O
+address ranges which may be in use by other devices in your system.
+On a Linux system, "cat /proc/ioports" will also be helpful in
+identifying what I/O addresses are being used by devices on your
+system.
+
+Remember, the FIRST RocketPort uses 68 I/O addresses. So, if you set it
+for 0x100, it will occupy 0x100 to 0x143. This would mean that you
+CAN NOT set the second, third or fourth board for address 0x140 since
+the first 4 bytes of that range are used by the first board. You would
+need to set the second, third, or fourth board to one of the next available
+blocks such as 0x180.
+
+RocketPort and RocketPort RA SW1 Settings::
+
+ +-------------------------------+
+ | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 |
+ +-------+-------+---------------+
+ | Unused| Card | I/O Port Block|
+ +-------------------------------+
+
+ DIP Switches DIP Switches
+ 7 8 6 5
+ =================== ===================
+ On On UNUSED, MUST BE ON. On On First Card <==== Default
+ On Off Second Card
+ Off On Third Card
+ Off Off Fourth Card
+
+ DIP Switches I/O Address Range
+ 4 3 2 1 Used by the First Card
+ =====================================
+ On Off On Off 100-143
+ On Off Off On 140-183
+ On Off Off Off 180-1C3 <==== Default
+ Off On On Off 200-243
+ Off On Off On 240-283
+ Off On Off Off 280-2C3
+ Off Off On Off 300-343
+ Off Off Off On 340-383
+ Off Off Off Off 380-3C3
+
+Reporting Bugs
+--------------
+
+For technical support, please provide the following
+information: Driver version, kernel release, distribution of
+kernel, and type of board you are using. Error messages and log
+printouts port configuration details are especially helpful.
+
+USA:
+ :Phone: (612) 494-4100
+ :FAX: (612) 494-4199
+ :email: support@comtrol.com
+
+Comtrol Europe:
+ :Phone: +44 (0) 1 869 323-220
+ :FAX: +44 (0) 1 869 323-211
+ :email: support@comtrol.co.uk
+
+Web: http://www.comtrol.com
+FTP: ftp.comtrol.com
diff --git a/Documentation/driver-api/serial/serial-iso7816.rst b/Documentation/driver-api/serial/serial-iso7816.rst
new file mode 100644
index 000000000000..d990143de0c6
--- /dev/null
+++ b/Documentation/driver-api/serial/serial-iso7816.rst
@@ -0,0 +1,90 @@
+=============================
+ISO7816 Serial Communications
+=============================
+
+1. Introduction
+===============
+
+ ISO/IEC7816 is a series of standards specifying integrated circuit cards (ICC)
+ also known as smart cards.
+
+2. Hardware-related considerations
+==================================
+
+ Some CPUs/UARTs (e.g., Microchip AT91) contain a built-in mode capable of
+ handling communication with a smart card.
+
+ For these microcontrollers, the Linux driver should be made capable of
+ working in both modes, and proper ioctls (see later) should be made
+ available at user-level to allow switching from one mode to the other, and
+ vice versa.
+
+3. Data Structures Already Available in the Kernel
+==================================================
+
+ The Linux kernel provides the serial_iso7816 structure (see [1]) to handle
+ ISO7816 communications. This data structure is used to set and configure
+ ISO7816 parameters in ioctls.
+
+ Any driver for devices capable of working both as RS232 and ISO7816 should
+ implement the iso7816_config callback in the uart_port structure. The
+ serial_core calls iso7816_config to do the device specific part in response
+ to TIOCGISO7816 and TIOCSISO7816 ioctls (see below). The iso7816_config
+ callback receives a pointer to struct serial_iso7816.
+
+4. Usage from user-level
+========================
+
+ From user-level, ISO7816 configuration can be get/set using the previous
+ ioctls. For instance, to set ISO7816 you can use the following code::
+
+ #include <linux/serial.h>
+
+ /* Include definition for ISO7816 ioctls: TIOCSISO7816 and TIOCGISO7816 */
+ #include <sys/ioctl.h>
+
+ /* Open your specific device (e.g., /dev/mydevice): */
+ int fd = open ("/dev/mydevice", O_RDWR);
+ if (fd < 0) {
+ /* Error handling. See errno. */
+ }
+
+ struct serial_iso7816 iso7816conf;
+
+ /* Reserved fields as to be zeroed */
+ memset(&iso7816conf, 0, sizeof(iso7816conf));
+
+ /* Enable ISO7816 mode: */
+ iso7816conf.flags |= SER_ISO7816_ENABLED;
+
+ /* Select the protocol: */
+ /* T=0 */
+ iso7816conf.flags |= SER_ISO7816_T(0);
+ /* or T=1 */
+ iso7816conf.flags |= SER_ISO7816_T(1);
+
+ /* Set the guard time: */
+ iso7816conf.tg = 2;
+
+ /* Set the clock frequency*/
+ iso7816conf.clk = 3571200;
+
+ /* Set transmission factors: */
+ iso7816conf.sc_fi = 372;
+ iso7816conf.sc_di = 1;
+
+ if (ioctl(fd_usart, TIOCSISO7816, &iso7816conf) < 0) {
+ /* Error handling. See errno. */
+ }
+
+ /* Use read() and write() syscalls here... */
+
+ /* Close the device when finished: */
+ if (close (fd) < 0) {
+ /* Error handling. See errno. */
+ }
+
+5. References
+=============
+
+ [1] include/uapi/linux/serial.h
diff --git a/Documentation/driver-api/serial/serial-rs485.rst b/Documentation/driver-api/serial/serial-rs485.rst
new file mode 100644
index 000000000000..6bc824f948f9
--- /dev/null
+++ b/Documentation/driver-api/serial/serial-rs485.rst
@@ -0,0 +1,103 @@
+===========================
+RS485 Serial Communications
+===========================
+
+1. Introduction
+===============
+
+ EIA-485, also known as TIA/EIA-485 or RS-485, is a standard defining the
+ electrical characteristics of drivers and receivers for use in balanced
+ digital multipoint systems.
+ This standard is widely used for communications in industrial automation
+ because it can be used effectively over long distances and in electrically
+ noisy environments.
+
+2. Hardware-related Considerations
+==================================
+
+ Some CPUs/UARTs (e.g., Atmel AT91 or 16C950 UART) contain a built-in
+ half-duplex mode capable of automatically controlling line direction by
+ toggling RTS or DTR signals. That can be used to control external
+ half-duplex hardware like an RS485 transceiver or any RS232-connected
+ half-duplex devices like some modems.
+
+ For these microcontrollers, the Linux driver should be made capable of
+ working in both modes, and proper ioctls (see later) should be made
+ available at user-level to allow switching from one mode to the other, and
+ vice versa.
+
+3. Data Structures Already Available in the Kernel
+==================================================
+
+ The Linux kernel provides the serial_rs485 structure (see [1]) to handle
+ RS485 communications. This data structure is used to set and configure RS485
+ parameters in the platform data and in ioctls.
+
+ The device tree can also provide RS485 boot time parameters (see [2]
+ for bindings). The driver is in charge of filling this data structure from
+ the values given by the device tree.
+
+ Any driver for devices capable of working both as RS232 and RS485 should
+ implement the rs485_config callback in the uart_port structure. The
+ serial_core calls rs485_config to do the device specific part in response
+ to TIOCSRS485 and TIOCGRS485 ioctls (see below). The rs485_config callback
+ receives a pointer to struct serial_rs485.
+
+4. Usage from user-level
+========================
+
+ From user-level, RS485 configuration can be get/set using the previous
+ ioctls. For instance, to set RS485 you can use the following code::
+
+ #include <linux/serial.h>
+
+ /* Include definition for RS485 ioctls: TIOCGRS485 and TIOCSRS485 */
+ #include <sys/ioctl.h>
+
+ /* Open your specific device (e.g., /dev/mydevice): */
+ int fd = open ("/dev/mydevice", O_RDWR);
+ if (fd < 0) {
+ /* Error handling. See errno. */
+ }
+
+ struct serial_rs485 rs485conf;
+
+ /* Enable RS485 mode: */
+ rs485conf.flags |= SER_RS485_ENABLED;
+
+ /* Set logical level for RTS pin equal to 1 when sending: */
+ rs485conf.flags |= SER_RS485_RTS_ON_SEND;
+ /* or, set logical level for RTS pin equal to 0 when sending: */
+ rs485conf.flags &= ~(SER_RS485_RTS_ON_SEND);
+
+ /* Set logical level for RTS pin equal to 1 after sending: */
+ rs485conf.flags |= SER_RS485_RTS_AFTER_SEND;
+ /* or, set logical level for RTS pin equal to 0 after sending: */
+ rs485conf.flags &= ~(SER_RS485_RTS_AFTER_SEND);
+
+ /* Set rts delay before send, if needed: */
+ rs485conf.delay_rts_before_send = ...;
+
+ /* Set rts delay after send, if needed: */
+ rs485conf.delay_rts_after_send = ...;
+
+ /* Set this flag if you want to receive data even while sending data */
+ rs485conf.flags |= SER_RS485_RX_DURING_TX;
+
+ if (ioctl (fd, TIOCSRS485, &rs485conf) < 0) {
+ /* Error handling. See errno. */
+ }
+
+ /* Use read() and write() syscalls here... */
+
+ /* Close the device when finished: */
+ if (close (fd) < 0) {
+ /* Error handling. See errno. */
+ }
+
+5. References
+=============
+
+ [1] include/uapi/linux/serial.h
+
+ [2] Documentation/devicetree/bindings/serial/rs485.txt
diff --git a/Documentation/driver-api/serial/tty.rst b/Documentation/driver-api/serial/tty.rst
new file mode 100644
index 000000000000..dd972caacf3e
--- /dev/null
+++ b/Documentation/driver-api/serial/tty.rst
@@ -0,0 +1,328 @@
+=================
+The Lockronomicon
+=================
+
+Your guide to the ancient and twisted locking policies of the tty layer and
+the warped logic behind them. Beware all ye who read on.
+
+
+Line Discipline
+---------------
+
+Line disciplines are registered with tty_register_ldisc() passing the
+discipline number and the ldisc structure. At the point of registration the
+discipline must be ready to use and it is possible it will get used before
+the call returns success. If the call returns an error then it won't get
+called. Do not re-use ldisc numbers as they are part of the userspace ABI
+and writing over an existing ldisc will cause demons to eat your computer.
+After the return the ldisc data has been copied so you may free your own
+copy of the structure. You must not re-register over the top of the line
+discipline even with the same data or your computer again will be eaten by
+demons.
+
+In order to remove a line discipline call tty_unregister_ldisc().
+In ancient times this always worked. In modern times the function will
+return -EBUSY if the ldisc is currently in use. Since the ldisc referencing
+code manages the module counts this should not usually be a concern.
+
+Heed this warning: the reference count field of the registered copies of the
+tty_ldisc structure in the ldisc table counts the number of lines using this
+discipline. The reference count of the tty_ldisc structure within a tty
+counts the number of active users of the ldisc at this instant. In effect it
+counts the number of threads of execution within an ldisc method (plus those
+about to enter and exit although this detail matters not).
+
+Line Discipline Methods
+-----------------------
+
+TTY side interfaces
+^^^^^^^^^^^^^^^^^^^
+
+======================= =======================================================
+open() Called when the line discipline is attached to
+ the terminal. No other call into the line
+ discipline for this tty will occur until it
+ completes successfully. Should initialize any
+ state needed by the ldisc, and set receive_room
+ in the tty_struct to the maximum amount of data
+ the line discipline is willing to accept from the
+ driver with a single call to receive_buf().
+ Returning an error will prevent the ldisc from
+ being attached. Can sleep.
+
+close() This is called on a terminal when the line
+ discipline is being unplugged. At the point of
+ execution no further users will enter the
+ ldisc code for this tty. Can sleep.
+
+hangup() Called when the tty line is hung up.
+ The line discipline should cease I/O to the tty.
+ No further calls into the ldisc code will occur.
+ The return value is ignored. Can sleep.
+
+read() (optional) A process requests reading data from
+ the line. Multiple read calls may occur in parallel
+ and the ldisc must deal with serialization issues.
+ If not defined, the process will receive an EIO
+ error. May sleep.
+
+write() (optional) A process requests writing data to the
+ line. Multiple write calls are serialized by the
+ tty layer for the ldisc. If not defined, the
+ process will receive an EIO error. May sleep.
+
+flush_buffer() (optional) May be called at any point between
+ open and close, and instructs the line discipline
+ to empty its input buffer.
+
+set_termios() (optional) Called on termios structure changes.
+ The caller passes the old termios data and the
+ current data is in the tty. Called under the
+ termios semaphore so allowed to sleep. Serialized
+ against itself only.
+
+poll() (optional) Check the status for the poll/select
+ calls. Multiple poll calls may occur in parallel.
+ May sleep.
+
+ioctl() (optional) Called when an ioctl is handed to the
+ tty layer that might be for the ldisc. Multiple
+ ioctl calls may occur in parallel. May sleep.
+
+compat_ioctl() (optional) Called when a 32 bit ioctl is handed
+ to the tty layer that might be for the ldisc.
+ Multiple ioctl calls may occur in parallel.
+ May sleep.
+======================= =======================================================
+
+Driver Side Interfaces
+^^^^^^^^^^^^^^^^^^^^^^
+
+======================= =======================================================
+receive_buf() (optional) Called by the low-level driver to hand
+ a buffer of received bytes to the ldisc for
+ processing. The number of bytes is guaranteed not
+ to exceed the current value of tty->receive_room.
+ All bytes must be processed.
+
+receive_buf2() (optional) Called by the low-level driver to hand
+ a buffer of received bytes to the ldisc for
+ processing. Returns the number of bytes processed.
+
+ If both receive_buf() and receive_buf2() are
+ defined, receive_buf2() should be preferred.
+
+write_wakeup() May be called at any point between open and close.
+ The TTY_DO_WRITE_WAKEUP flag indicates if a call
+ is needed but always races versus calls. Thus the
+ ldisc must be careful about setting order and to
+ handle unexpected calls. Must not sleep.
+
+ The driver is forbidden from calling this directly
+ from the ->write call from the ldisc as the ldisc
+ is permitted to call the driver write method from
+ this function. In such a situation defer it.
+
+dcd_change() Report to the tty line the current DCD pin status
+ changes and the relative timestamp. The timestamp
+ cannot be NULL.
+======================= =======================================================
+
+
+Driver Access
+^^^^^^^^^^^^^
+
+Line discipline methods can call the following methods of the underlying
+hardware driver through the function pointers within the tty->driver
+structure:
+
+======================= =======================================================
+write() Write a block of characters to the tty device.
+ Returns the number of characters accepted. The
+ character buffer passed to this method is already
+ in kernel space.
+
+put_char() Queues a character for writing to the tty device.
+ If there is no room in the queue, the character is
+ ignored.
+
+flush_chars() (Optional) If defined, must be called after
+ queueing characters with put_char() in order to
+ start transmission.
+
+write_room() Returns the numbers of characters the tty driver
+ will accept for queueing to be written.
+
+ioctl() Invoke device specific ioctl.
+ Expects data pointers to refer to userspace.
+ Returns ENOIOCTLCMD for unrecognized ioctl numbers.
+
+set_termios() Notify the tty driver that the device's termios
+ settings have changed. New settings are in
+ tty->termios. Previous settings should be passed in
+ the "old" argument.
+
+ The API is defined such that the driver should return
+ the actual modes selected. This means that the
+ driver function is responsible for modifying any
+ bits in the request it cannot fulfill to indicate
+ the actual modes being used. A device with no
+ hardware capability for change (e.g. a USB dongle or
+ virtual port) can provide NULL for this method.
+
+throttle() Notify the tty driver that input buffers for the
+ line discipline are close to full, and it should
+ somehow signal that no more characters should be
+ sent to the tty.
+
+unthrottle() Notify the tty driver that characters can now be
+ sent to the tty without fear of overrunning the
+ input buffers of the line disciplines.
+
+stop() Ask the tty driver to stop outputting characters
+ to the tty device.
+
+start() Ask the tty driver to resume sending characters
+ to the tty device.
+
+hangup() Ask the tty driver to hang up the tty device.
+
+break_ctl() (Optional) Ask the tty driver to turn on or off
+ BREAK status on the RS-232 port. If state is -1,
+ then the BREAK status should be turned on; if
+ state is 0, then BREAK should be turned off.
+ If this routine is not implemented, use ioctls
+ TIOCSBRK / TIOCCBRK instead.
+
+wait_until_sent() Waits until the device has written out all of the
+ characters in its transmitter FIFO.
+
+send_xchar() Send a high-priority XON/XOFF character to the device.
+======================= =======================================================
+
+
+Flags
+^^^^^
+
+Line discipline methods have access to tty->flags field containing the
+following interesting flags:
+
+======================= =======================================================
+TTY_THROTTLED Driver input is throttled. The ldisc should call
+ tty->driver->unthrottle() in order to resume
+ reception when it is ready to process more data.
+
+TTY_DO_WRITE_WAKEUP If set, causes the driver to call the ldisc's
+ write_wakeup() method in order to resume
+ transmission when it can accept more data
+ to transmit.
+
+TTY_IO_ERROR If set, causes all subsequent userspace read/write
+ calls on the tty to fail, returning -EIO.
+
+TTY_OTHER_CLOSED Device is a pty and the other side has closed.
+
+TTY_NO_WRITE_SPLIT Prevent driver from splitting up writes into
+ smaller chunks.
+======================= =======================================================
+
+
+Locking
+^^^^^^^
+
+Callers to the line discipline functions from the tty layer are required to
+take line discipline locks. The same is true of calls from the driver side
+but not yet enforced.
+
+Three calls are now provided::
+
+ ldisc = tty_ldisc_ref(tty);
+
+takes a handle to the line discipline in the tty and returns it. If no ldisc
+is currently attached or the ldisc is being closed and re-opened at this
+point then NULL is returned. While this handle is held the ldisc will not
+change or go away::
+
+ tty_ldisc_deref(ldisc)
+
+Returns the ldisc reference and allows the ldisc to be closed. Returning the
+reference takes away your right to call the ldisc functions until you take
+a new reference::
+
+ ldisc = tty_ldisc_ref_wait(tty);
+
+Performs the same function as tty_ldisc_ref except that it will wait for an
+ldisc change to complete and then return a reference to the new ldisc.
+
+While these functions are slightly slower than the old code they should have
+minimal impact as most receive logic uses the flip buffers and they only
+need to take a reference when they push bits up through the driver.
+
+A caution: The ldisc->open(), ldisc->close() and driver->set_ldisc
+functions are called with the ldisc unavailable. Thus tty_ldisc_ref will
+fail in this situation if used within these functions. Ldisc and driver
+code calling its own functions must be careful in this case.
+
+
+Driver Interface
+----------------
+
+======================= =======================================================
+open() Called when a device is opened. May sleep
+
+close() Called when a device is closed. At the point of
+ return from this call the driver must make no
+ further ldisc calls of any kind. May sleep
+
+write() Called to write bytes to the device. May not
+ sleep. May occur in parallel in special cases.
+ Because this includes panic paths drivers generally
+ shouldn't try and do clever locking here.
+
+put_char() Stuff a single character onto the queue. The
+ driver is guaranteed following up calls to
+ flush_chars.
+
+flush_chars() Ask the kernel to write put_char queue
+
+write_room() Return the number of characters that can be stuffed
+ into the port buffers without overflow (or less).
+ The ldisc is responsible for being intelligent
+ about multi-threading of write_room/write calls
+
+ioctl() Called when an ioctl may be for the driver
+
+set_termios() Called on termios change, serialized against
+ itself by a semaphore. May sleep.
+
+set_ldisc() Notifier for discipline change. At the point this
+ is done the discipline is not yet usable. Can now
+ sleep (I think)
+
+throttle() Called by the ldisc to ask the driver to do flow
+ control. Serialization including with unthrottle
+ is the job of the ldisc layer.
+
+unthrottle() Called by the ldisc to ask the driver to stop flow
+ control.
+
+stop() Ldisc notifier to the driver to stop output. As with
+ throttle the serializations with start() are down
+ to the ldisc layer.
+
+start() Ldisc notifier to the driver to start output.
+
+hangup() Ask the tty driver to cause a hangup initiated
+ from the host side. [Can sleep ??]
+
+break_ctl() Send RS232 break. Can sleep. Can get called in
+ parallel, driver must serialize (for now), and
+ with write calls.
+
+wait_until_sent() Wait for characters to exit the hardware queue
+ of the driver. Can sleep
+
+send_xchar() Send XON/XOFF and if possible jump the queue with
+ it in order to get fast flow control responses.
+ Cannot sleep ??
+======================= =======================================================
diff --git a/Documentation/driver-api/sgi-ioc4.rst b/Documentation/driver-api/sgi-ioc4.rst
new file mode 100644
index 000000000000..72709222d3c0
--- /dev/null
+++ b/Documentation/driver-api/sgi-ioc4.rst
@@ -0,0 +1,49 @@
+====================================
+SGI IOC4 PCI (multi function) device
+====================================
+
+The SGI IOC4 PCI device is a bit of a strange beast, so some notes on
+it are in order.
+
+First, even though the IOC4 performs multiple functions, such as an
+IDE controller, a serial controller, a PS/2 keyboard/mouse controller,
+and an external interrupt mechanism, it's not implemented as a
+multifunction device. The consequence of this from a software
+standpoint is that all these functions share a single IRQ, and
+they can't all register to own the same PCI device ID. To make
+matters a bit worse, some of the register blocks (and even registers
+themselves) present in IOC4 are mixed-purpose between these several
+functions, meaning that there's no clear "owning" device driver.
+
+The solution is to organize the IOC4 driver into several independent
+drivers, "ioc4", "sgiioc4", and "ioc4_serial". Note that there is no
+PS/2 controller driver as this functionality has never been wired up
+on a shipping IO card.
+
+ioc4
+====
+This is the core (or shim) driver for IOC4. It is responsible for
+initializing the basic functionality of the chip, and allocating
+the PCI resources that are shared between the IOC4 functions.
+
+This driver also provides registration functions that the other
+IOC4 drivers can call to make their presence known. Each driver
+needs to provide a probe and remove function, which are invoked
+by the core driver at appropriate times. The interface of these
+IOC4 function probe and remove operations isn't precisely the same
+as PCI device probe and remove operations, but is logically the
+same operation.
+
+sgiioc4
+=======
+This is the IDE driver for IOC4. Its name isn't very descriptive
+simply for historical reasons (it used to be the only IOC4 driver
+component). There's not much to say about it other than it hooks
+up to the ioc4 driver via the appropriate registration, probe, and
+remove functions.
+
+ioc4_serial
+===========
+This is the serial driver for IOC4. There's not much to say about it
+other than it hooks up to the ioc4 driver via the appropriate registration,
+probe, and remove functions.
diff --git a/Documentation/driver-api/sm501.rst b/Documentation/driver-api/sm501.rst
new file mode 100644
index 000000000000..882507453ba4
--- /dev/null
+++ b/Documentation/driver-api/sm501.rst
@@ -0,0 +1,74 @@
+.. include:: <isonum.txt>
+
+============
+SM501 Driver
+============
+
+:Copyright: |copy| 2006, 2007 Simtec Electronics
+
+The Silicon Motion SM501 multimedia companion chip is a multifunction device
+which may provide numerous interfaces including USB host controller USB gadget,
+asynchronous serial ports, audio functions, and a dual display video interface.
+The device may be connected by PCI or local bus with varying functions enabled.
+
+Core
+----
+
+The core driver in drivers/mfd provides common services for the
+drivers which manage the specific hardware blocks. These services
+include locking for common registers, clock control and resource
+management.
+
+The core registers drivers for both PCI and generic bus based
+chips via the platform device and driver system.
+
+On detection of a device, the core initialises the chip (which may
+be specified by the platform data) and then exports the selected
+peripheral set as platform devices for the specific drivers.
+
+The core re-uses the platform device system as the platform device
+system provides enough features to support the drivers without the
+need to create a new bus-type and the associated code to go with it.
+
+
+Resources
+---------
+
+Each peripheral has a view of the device which is implicitly narrowed to
+the specific set of resources that peripheral requires in order to
+function correctly.
+
+The centralised memory allocation allows the driver to ensure that the
+maximum possible resource allocation can be made to the video subsystem
+as this is by-far the most resource-sensitive of the on-chip functions.
+
+The primary issue with memory allocation is that of moving the video
+buffers once a display mode is chosen. Indeed when a video mode change
+occurs the memory footprint of the video subsystem changes.
+
+Since video memory is difficult to move without changing the display
+(unless sufficient contiguous memory can be provided for the old and new
+modes simultaneously) the video driver fully utilises the memory area
+given to it by aligning fb0 to the start of the area and fb1 to the end
+of it. Any memory left over in the middle is used for the acceleration
+functions, which are transient and thus their location is less critical
+as it can be moved.
+
+
+Configuration
+-------------
+
+The platform device driver uses a set of platform data to pass
+configurations through to the core and the subsidiary drivers
+so that there can be support for more than one system carrying
+an SM501 built into a single kernel image.
+
+The PCI driver assumes that the PCI card behaves as per the Silicon
+Motion reference design.
+
+There is an errata (AB-5) affecting the selection of the
+of the M1XCLK and M1CLK frequencies. These two clocks
+must be sourced from the same PLL, although they can then
+be divided down individually. If this is not set, then SM501 may
+lock and hang the whole system. The driver will refuse to
+attach if the PLL selection is different.
diff --git a/Documentation/driver-api/smsc_ece1099.rst b/Documentation/driver-api/smsc_ece1099.rst
new file mode 100644
index 000000000000..079277421eaf
--- /dev/null
+++ b/Documentation/driver-api/smsc_ece1099.rst
@@ -0,0 +1,60 @@
+=================================================
+Msc Keyboard Scan Expansion/GPIO Expansion device
+=================================================
+
+What is smsc-ece1099?
+----------------------
+
+The ECE1099 is a 40-Pin 3.3V Keyboard Scan Expansion
+or GPIO Expansion device. The device supports a keyboard
+scan matrix of 23x8. The device is connected to a Master
+via the SMSC BC-Link interface or via the SMBus.
+Keypad scan Input(KSI) and Keypad Scan Output(KSO) signals
+are multiplexed with GPIOs.
+
+Interrupt generation
+--------------------
+
+Interrupts can be generated by an edge detection on a GPIO
+pin or an edge detection on one of the bus interface pins.
+Interrupts can also be detected on the keyboard scan interface.
+The bus interrupt pin (BC_INT# or SMBUS_INT#) is asserted if
+any bit in one of the Interrupt Status registers is 1 and
+the corresponding Interrupt Mask bit is also 1.
+
+In order for software to determine which device is the source
+of an interrupt, it should first read the Group Interrupt Status Register
+to determine which Status register group is a source for the interrupt.
+Software should read both the Status register and the associated Mask register,
+then AND the two values together. Bits that are 1 in the result of the AND
+are active interrupts. Software clears an interrupt by writing a 1 to the
+corresponding bit in the Status register.
+
+Communication Protocol
+----------------------
+
+- SMbus slave Interface
+ The host processor communicates with the ECE1099 device
+ through a series of read/write registers via the SMBus
+ interface. SMBus is a serial communication protocol between
+ a computer host and its peripheral devices. The SMBus data
+ rate is 10KHz minimum to 400 KHz maximum
+
+- Slave Bus Interface
+ The ECE1099 device SMBus implementation is a subset of the
+ SMBus interface to the host. The device is a slave-only SMBus device.
+ The implementation in the device is a subset of SMBus since it
+ only supports four protocols.
+
+ The Write Byte, Read Byte, Send Byte, and Receive Byte protocols are the
+ only valid SMBus protocols for the device.
+
+- BC-LinkTM Interface
+ The BC-Link is a proprietary bus that allows communication
+ between a Master device and a Companion device. The Master
+ device uses this serial bus to read and write registers
+ located on the Companion device. The bus comprises three signals,
+ BC_CLK, BC_DAT and BC_INT#. The Master device always provides the
+ clock, BC_CLK, and the Companion device is the source for an
+ independent asynchronous interrupt signal, BC_INT#. The ECE1099
+ supports BC-Link speeds up to 24MHz.
diff --git a/Documentation/driver-api/switchtec.rst b/Documentation/driver-api/switchtec.rst
new file mode 100644
index 000000000000..7611fdc53e19
--- /dev/null
+++ b/Documentation/driver-api/switchtec.rst
@@ -0,0 +1,102 @@
+========================
+Linux Switchtec Support
+========================
+
+Microsemi's "Switchtec" line of PCI switch devices is already
+supported by the kernel with standard PCI switch drivers. However, the
+Switchtec device advertises a special management endpoint which
+enables some additional functionality. This includes:
+
+* Packet and Byte Counters
+* Firmware Upgrades
+* Event and Error logs
+* Querying port link status
+* Custom user firmware commands
+
+The switchtec kernel module implements this functionality.
+
+
+Interface
+=========
+
+The primary means of communicating with the Switchtec management firmware is
+through the Memory-mapped Remote Procedure Call (MRPC) interface.
+Commands are submitted to the interface with a 4-byte command
+identifier and up to 1KB of command specific data. The firmware will
+respond with a 4-byte return code and up to 1KB of command-specific
+data. The interface only processes a single command at a time.
+
+
+Userspace Interface
+===================
+
+The MRPC interface will be exposed to userspace through a simple char
+device: /dev/switchtec#, one for each management endpoint in the system.
+
+The char device has the following semantics:
+
+* A write must consist of at least 4 bytes and no more than 1028 bytes.
+ The first 4 bytes will be interpreted as the Command ID and the
+ remainder will be used as the input data. A write will send the
+ command to the firmware to begin processing.
+
+* Each write must be followed by exactly one read. Any double write will
+ produce an error and any read that doesn't follow a write will
+ produce an error.
+
+* A read will block until the firmware completes the command and return
+ the 4-byte Command Return Value plus up to 1024 bytes of output
+ data. (The length will be specified by the size parameter of the read
+ call -- reading less than 4 bytes will produce an error.)
+
+* The poll call will also be supported for userspace applications that
+ need to do other things while waiting for the command to complete.
+
+The following IOCTLs are also supported by the device:
+
+* SWITCHTEC_IOCTL_FLASH_INFO - Retrieve firmware length and number
+ of partitions in the device.
+
+* SWITCHTEC_IOCTL_FLASH_PART_INFO - Retrieve address and lengeth for
+ any specified partition in flash.
+
+* SWITCHTEC_IOCTL_EVENT_SUMMARY - Read a structure of bitmaps
+ indicating all uncleared events.
+
+* SWITCHTEC_IOCTL_EVENT_CTL - Get the current count, clear and set flags
+ for any event. This ioctl takes in a switchtec_ioctl_event_ctl struct
+ with the event_id, index and flags set (index being the partition or PFF
+ number for non-global events). It returns whether the event has
+ occurred, the number of times and any event specific data. The flags
+ can be used to clear the count or enable and disable actions to
+ happen when the event occurs.
+ By using the SWITCHTEC_IOCTL_EVENT_FLAG_EN_POLL flag,
+ you can set an event to trigger a poll command to return with
+ POLLPRI. In this way, userspace can wait for events to occur.
+
+* SWITCHTEC_IOCTL_PFF_TO_PORT and SWITCHTEC_IOCTL_PORT_TO_PFF convert
+ between PCI Function Framework number (used by the event system)
+ and Switchtec Logic Port ID and Partition number (which is more
+ user friendly).
+
+
+Non-Transparent Bridge (NTB) Driver
+===================================
+
+An NTB hardware driver is provided for the Switchtec hardware in
+ntb_hw_switchtec. Currently, it only supports switches configured with
+exactly 2 NT partitions and zero or more non-NT partitions. It also requires
+the following configuration settings:
+
+* Both NT partitions must be able to access each other's GAS spaces.
+ Thus, the bits in the GAS Access Vector under Management Settings
+ must be set to support this.
+* Kernel configuration MUST include support for NTB (CONFIG_NTB needs
+ to be set)
+
+NT EP BAR 2 will be dynamically configured as a Direct Window, and
+the configuration file does not need to configure it explicitly.
+
+Please refer to Documentation/driver-api/ntb.rst in Linux source tree for an overall
+understanding of the Linux NTB stack. ntb_hw_switchtec works as an NTB
+Hardware Driver in this stack.
diff --git a/Documentation/driver-api/sync_file.rst b/Documentation/driver-api/sync_file.rst
new file mode 100644
index 000000000000..496fb2c3b3e6
--- /dev/null
+++ b/Documentation/driver-api/sync_file.rst
@@ -0,0 +1,86 @@
+===================
+Sync File API Guide
+===================
+
+:Author: Gustavo Padovan <gustavo at padovan dot org>
+
+This document serves as a guide for device drivers writers on what the
+sync_file API is, and how drivers can support it. Sync file is the carrier of
+the fences(struct dma_fence) that are needed to synchronize between drivers or
+across process boundaries.
+
+The sync_file API is meant to be used to send and receive fence information
+to/from userspace. It enables userspace to do explicit fencing, where instead
+of attaching a fence to the buffer a producer driver (such as a GPU or V4L
+driver) sends the fence related to the buffer to userspace via a sync_file.
+
+The sync_file then can be sent to the consumer (DRM driver for example), that
+will not use the buffer for anything before the fence(s) signals, i.e., the
+driver that issued the fence is not using/processing the buffer anymore, so it
+signals that the buffer is ready to use. And vice-versa for the consumer ->
+producer part of the cycle.
+
+Sync files allows userspace awareness on buffer sharing synchronization between
+drivers.
+
+Sync file was originally added in the Android kernel but current Linux Desktop
+can benefit a lot from it.
+
+in-fences and out-fences
+------------------------
+
+Sync files can go either to or from userspace. When a sync_file is sent from
+the driver to userspace we call the fences it contains 'out-fences'. They are
+related to a buffer that the driver is processing or is going to process, so
+the driver creates an out-fence to be able to notify, through
+dma_fence_signal(), when it has finished using (or processing) that buffer.
+Out-fences are fences that the driver creates.
+
+On the other hand if the driver receives fence(s) through a sync_file from
+userspace we call these fence(s) 'in-fences'. Receiving in-fences means that
+we need to wait for the fence(s) to signal before using any buffer related to
+the in-fences.
+
+Creating Sync Files
+-------------------
+
+When a driver needs to send an out-fence userspace it creates a sync_file.
+
+Interface::
+
+ struct sync_file *sync_file_create(struct dma_fence *fence);
+
+The caller pass the out-fence and gets back the sync_file. That is just the
+first step, next it needs to install an fd on sync_file->file. So it gets an
+fd::
+
+ fd = get_unused_fd_flags(O_CLOEXEC);
+
+and installs it on sync_file->file::
+
+ fd_install(fd, sync_file->file);
+
+The sync_file fd now can be sent to userspace.
+
+If the creation process fail, or the sync_file needs to be released by any
+other reason fput(sync_file->file) should be used.
+
+Receiving Sync Files from Userspace
+-----------------------------------
+
+When userspace needs to send an in-fence to the driver it passes file descriptor
+of the Sync File to the kernel. The kernel can then retrieve the fences
+from it.
+
+Interface::
+
+ struct dma_fence *sync_file_get_fence(int fd);
+
+
+The returned reference is owned by the caller and must be disposed of
+afterwards using dma_fence_put(). In case of error, a NULL is returned instead.
+
+References:
+
+1. struct sync_file in include/linux/sync_file.h
+2. All interfaces mentioned above defined in include/linux/sync_file.h
diff --git a/Documentation/driver-api/vfio-mediated-device.rst b/Documentation/driver-api/vfio-mediated-device.rst
new file mode 100644
index 000000000000..25eb7d5b834b
--- /dev/null
+++ b/Documentation/driver-api/vfio-mediated-device.rst
@@ -0,0 +1,414 @@
+.. include:: <isonum.txt>
+
+=====================
+VFIO Mediated devices
+=====================
+
+:Copyright: |copy| 2016, NVIDIA CORPORATION. All rights reserved.
+:Author: Neo Jia <cjia@nvidia.com>
+:Author: Kirti Wankhede <kwankhede@nvidia.com>
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License version 2 as
+published by the Free Software Foundation.
+
+
+Virtual Function I/O (VFIO) Mediated devices[1]
+===============================================
+
+The number of use cases for virtualizing DMA devices that do not have built-in
+SR_IOV capability is increasing. Previously, to virtualize such devices,
+developers had to create their own management interfaces and APIs, and then
+integrate them with user space software. To simplify integration with user space
+software, we have identified common requirements and a unified management
+interface for such devices.
+
+The VFIO driver framework provides unified APIs for direct device access. It is
+an IOMMU/device-agnostic framework for exposing direct device access to user
+space in a secure, IOMMU-protected environment. This framework is used for
+multiple devices, such as GPUs, network adapters, and compute accelerators. With
+direct device access, virtual machines or user space applications have direct
+access to the physical device. This framework is reused for mediated devices.
+
+The mediated core driver provides a common interface for mediated device
+management that can be used by drivers of different devices. This module
+provides a generic interface to perform these operations:
+
+* Create and destroy a mediated device
+* Add a mediated device to and remove it from a mediated bus driver
+* Add a mediated device to and remove it from an IOMMU group
+
+The mediated core driver also provides an interface to register a bus driver.
+For example, the mediated VFIO mdev driver is designed for mediated devices and
+supports VFIO APIs. The mediated bus driver adds a mediated device to and
+removes it from a VFIO group.
+
+The following high-level block diagram shows the main components and interfaces
+in the VFIO mediated driver framework. The diagram shows NVIDIA, Intel, and IBM
+devices as examples, as these devices are the first devices to use this module::
+
+ +---------------+
+ | |
+ | +-----------+ | mdev_register_driver() +--------------+
+ | | | +<------------------------+ |
+ | | mdev | | | |
+ | | bus | +------------------------>+ vfio_mdev.ko |<-> VFIO user
+ | | driver | | probe()/remove() | | APIs
+ | | | | +--------------+
+ | +-----------+ |
+ | |
+ | MDEV CORE |
+ | MODULE |
+ | mdev.ko |
+ | +-----------+ | mdev_register_device() +--------------+
+ | | | +<------------------------+ |
+ | | | | | nvidia.ko |<-> physical
+ | | | +------------------------>+ | device
+ | | | | callbacks +--------------+
+ | | Physical | |
+ | | device | | mdev_register_device() +--------------+
+ | | interface | |<------------------------+ |
+ | | | | | i915.ko |<-> physical
+ | | | +------------------------>+ | device
+ | | | | callbacks +--------------+
+ | | | |
+ | | | | mdev_register_device() +--------------+
+ | | | +<------------------------+ |
+ | | | | | ccw_device.ko|<-> physical
+ | | | +------------------------>+ | device
+ | | | | callbacks +--------------+
+ | +-----------+ |
+ +---------------+
+
+
+Registration Interfaces
+=======================
+
+The mediated core driver provides the following types of registration
+interfaces:
+
+* Registration interface for a mediated bus driver
+* Physical device driver interface
+
+Registration Interface for a Mediated Bus Driver
+------------------------------------------------
+
+The registration interface for a mediated bus driver provides the following
+structure to represent a mediated device's driver::
+
+ /*
+ * struct mdev_driver [2] - Mediated device's driver
+ * @name: driver name
+ * @probe: called when new device created
+ * @remove: called when device removed
+ * @driver: device driver structure
+ */
+ struct mdev_driver {
+ const char *name;
+ int (*probe) (struct device *dev);
+ void (*remove) (struct device *dev);
+ struct device_driver driver;
+ };
+
+A mediated bus driver for mdev should use this structure in the function calls
+to register and unregister itself with the core driver:
+
+* Register::
+
+ extern int mdev_register_driver(struct mdev_driver *drv,
+ struct module *owner);
+
+* Unregister::
+
+ extern void mdev_unregister_driver(struct mdev_driver *drv);
+
+The mediated bus driver is responsible for adding mediated devices to the VFIO
+group when devices are bound to the driver and removing mediated devices from
+the VFIO when devices are unbound from the driver.
+
+
+Physical Device Driver Interface
+--------------------------------
+
+The physical device driver interface provides the mdev_parent_ops[3] structure
+to define the APIs to manage work in the mediated core driver that is related
+to the physical device.
+
+The structures in the mdev_parent_ops structure are as follows:
+
+* dev_attr_groups: attributes of the parent device
+* mdev_attr_groups: attributes of the mediated device
+* supported_config: attributes to define supported configurations
+
+The functions in the mdev_parent_ops structure are as follows:
+
+* create: allocate basic resources in a driver for a mediated device
+* remove: free resources in a driver when a mediated device is destroyed
+
+(Note that mdev-core provides no implicit serialization of create/remove
+callbacks per mdev parent device, per mdev type, or any other categorization.
+Vendor drivers are expected to be fully asynchronous in this respect or
+provide their own internal resource protection.)
+
+The callbacks in the mdev_parent_ops structure are as follows:
+
+* open: open callback of mediated device
+* close: close callback of mediated device
+* ioctl: ioctl callback of mediated device
+* read : read emulation callback
+* write: write emulation callback
+* mmap: mmap emulation callback
+
+A driver should use the mdev_parent_ops structure in the function call to
+register itself with the mdev core driver::
+
+ extern int mdev_register_device(struct device *dev,
+ const struct mdev_parent_ops *ops);
+
+However, the mdev_parent_ops structure is not required in the function call
+that a driver should use to unregister itself with the mdev core driver::
+
+ extern void mdev_unregister_device(struct device *dev);
+
+
+Mediated Device Management Interface Through sysfs
+==================================================
+
+The management interface through sysfs enables user space software, such as
+libvirt, to query and configure mediated devices in a hardware-agnostic fashion.
+This management interface provides flexibility to the underlying physical
+device's driver to support features such as:
+
+* Mediated device hot plug
+* Multiple mediated devices in a single virtual machine
+* Multiple mediated devices from different physical devices
+
+Links in the mdev_bus Class Directory
+-------------------------------------
+The /sys/class/mdev_bus/ directory contains links to devices that are registered
+with the mdev core driver.
+
+Directories and files under the sysfs for Each Physical Device
+--------------------------------------------------------------
+
+::
+
+ |- [parent physical device]
+ |--- Vendor-specific-attributes [optional]
+ |--- [mdev_supported_types]
+ | |--- [<type-id>]
+ | | |--- create
+ | | |--- name
+ | | |--- available_instances
+ | | |--- device_api
+ | | |--- description
+ | | |--- [devices]
+ | |--- [<type-id>]
+ | | |--- create
+ | | |--- name
+ | | |--- available_instances
+ | | |--- device_api
+ | | |--- description
+ | | |--- [devices]
+ | |--- [<type-id>]
+ | |--- create
+ | |--- name
+ | |--- available_instances
+ | |--- device_api
+ | |--- description
+ | |--- [devices]
+
+* [mdev_supported_types]
+
+ The list of currently supported mediated device types and their details.
+
+ [<type-id>], device_api, and available_instances are mandatory attributes
+ that should be provided by vendor driver.
+
+* [<type-id>]
+
+ The [<type-id>] name is created by adding the device driver string as a prefix
+ to the string provided by the vendor driver. This format of this name is as
+ follows::
+
+ sprintf(buf, "%s-%s", dev_driver_string(parent->dev), group->name);
+
+ (or using mdev_parent_dev(mdev) to arrive at the parent device outside
+ of the core mdev code)
+
+* device_api
+
+ This attribute should show which device API is being created, for example,
+ "vfio-pci" for a PCI device.
+
+* available_instances
+
+ This attribute should show the number of devices of type <type-id> that can be
+ created.
+
+* [device]
+
+ This directory contains links to the devices of type <type-id> that have been
+ created.
+
+* name
+
+ This attribute should show human readable name. This is optional attribute.
+
+* description
+
+ This attribute should show brief features/description of the type. This is
+ optional attribute.
+
+Directories and Files Under the sysfs for Each mdev Device
+----------------------------------------------------------
+
+::
+
+ |- [parent phy device]
+ |--- [$MDEV_UUID]
+ |--- remove
+ |--- mdev_type {link to its type}
+ |--- vendor-specific-attributes [optional]
+
+* remove (write only)
+
+Writing '1' to the 'remove' file destroys the mdev device. The vendor driver can
+fail the remove() callback if that device is active and the vendor driver
+doesn't support hot unplug.
+
+Example::
+
+ # echo 1 > /sys/bus/mdev/devices/$mdev_UUID/remove
+
+Mediated device Hot plug
+------------------------
+
+Mediated devices can be created and assigned at runtime. The procedure to hot
+plug a mediated device is the same as the procedure to hot plug a PCI device.
+
+Translation APIs for Mediated Devices
+=====================================
+
+The following APIs are provided for translating user pfn to host pfn in a VFIO
+driver::
+
+ extern int vfio_pin_pages(struct device *dev, unsigned long *user_pfn,
+ int npage, int prot, unsigned long *phys_pfn);
+
+ extern int vfio_unpin_pages(struct device *dev, unsigned long *user_pfn,
+ int npage);
+
+These functions call back into the back-end IOMMU module by using the pin_pages
+and unpin_pages callbacks of the struct vfio_iommu_driver_ops[4]. Currently
+these callbacks are supported in the TYPE1 IOMMU module. To enable them for
+other IOMMU backend modules, such as PPC64 sPAPR module, they need to provide
+these two callback functions.
+
+Using the Sample Code
+=====================
+
+mtty.c in samples/vfio-mdev/ directory is a sample driver program to
+demonstrate how to use the mediated device framework.
+
+The sample driver creates an mdev device that simulates a serial port over a PCI
+card.
+
+1. Build and load the mtty.ko module.
+
+ This step creates a dummy device, /sys/devices/virtual/mtty/mtty/
+
+ Files in this device directory in sysfs are similar to the following::
+
+ # tree /sys/devices/virtual/mtty/mtty/
+ /sys/devices/virtual/mtty/mtty/
+ |-- mdev_supported_types
+ | |-- mtty-1
+ | | |-- available_instances
+ | | |-- create
+ | | |-- device_api
+ | | |-- devices
+ | | `-- name
+ | `-- mtty-2
+ | |-- available_instances
+ | |-- create
+ | |-- device_api
+ | |-- devices
+ | `-- name
+ |-- mtty_dev
+ | `-- sample_mtty_dev
+ |-- power
+ | |-- autosuspend_delay_ms
+ | |-- control
+ | |-- runtime_active_time
+ | |-- runtime_status
+ | `-- runtime_suspended_time
+ |-- subsystem -> ../../../../class/mtty
+ `-- uevent
+
+2. Create a mediated device by using the dummy device that you created in the
+ previous step::
+
+ # echo "83b8f4f2-509f-382f-3c1e-e6bfe0fa1001" > \
+ /sys/devices/virtual/mtty/mtty/mdev_supported_types/mtty-2/create
+
+3. Add parameters to qemu-kvm::
+
+ -device vfio-pci,\
+ sysfsdev=/sys/bus/mdev/devices/83b8f4f2-509f-382f-3c1e-e6bfe0fa1001
+
+4. Boot the VM.
+
+ In the Linux guest VM, with no hardware on the host, the device appears
+ as follows::
+
+ # lspci -s 00:05.0 -xxvv
+ 00:05.0 Serial controller: Device 4348:3253 (rev 10) (prog-if 02 [16550])
+ Subsystem: Device 4348:3253
+ Physical Slot: 5
+ Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
+ Stepping- SERR- FastB2B- DisINTx-
+ Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
+ <TAbort- <MAbort- >SERR- <PERR- INTx-
+ Interrupt: pin A routed to IRQ 10
+ Region 0: I/O ports at c150 [size=8]
+ Region 1: I/O ports at c158 [size=8]
+ Kernel driver in use: serial
+ 00: 48 43 53 32 01 00 00 02 10 02 00 07 00 00 00 00
+ 10: 51 c1 00 00 59 c1 00 00 00 00 00 00 00 00 00 00
+ 20: 00 00 00 00 00 00 00 00 00 00 00 00 48 43 53 32
+ 30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 01 00 00
+
+ In the Linux guest VM, dmesg output for the device is as follows:
+
+ serial 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
+ 0000:00:05.0: ttyS1 at I/O 0xc150 (irq = 10) is a 16550A
+ 0000:00:05.0: ttyS2 at I/O 0xc158 (irq = 10) is a 16550A
+
+
+5. In the Linux guest VM, check the serial ports::
+
+ # setserial -g /dev/ttyS*
+ /dev/ttyS0, UART: 16550A, Port: 0x03f8, IRQ: 4
+ /dev/ttyS1, UART: 16550A, Port: 0xc150, IRQ: 10
+ /dev/ttyS2, UART: 16550A, Port: 0xc158, IRQ: 10
+
+6. Using minicom or any terminal emulation program, open port /dev/ttyS1 or
+ /dev/ttyS2 with hardware flow control disabled.
+
+7. Type data on the minicom terminal or send data to the terminal emulation
+ program and read the data.
+
+ Data is loop backed from hosts mtty driver.
+
+8. Destroy the mediated device that you created::
+
+ # echo 1 > /sys/bus/mdev/devices/83b8f4f2-509f-382f-3c1e-e6bfe0fa1001/remove
+
+References
+==========
+
+1. See Documentation/driver-api/vfio.rst for more information on VFIO.
+2. struct mdev_driver in include/linux/mdev.h
+3. struct mdev_parent_ops in include/linux/mdev.h
+4. struct vfio_iommu_driver_ops in include/linux/vfio.h
diff --git a/Documentation/driver-api/vfio.rst b/Documentation/driver-api/vfio.rst
new file mode 100644
index 000000000000..f1a4d3c3ba0b
--- /dev/null
+++ b/Documentation/driver-api/vfio.rst
@@ -0,0 +1,520 @@
+==================================
+VFIO - "Virtual Function I/O" [1]_
+==================================
+
+Many modern system now provide DMA and interrupt remapping facilities
+to help ensure I/O devices behave within the boundaries they've been
+allotted. This includes x86 hardware with AMD-Vi and Intel VT-d,
+POWER systems with Partitionable Endpoints (PEs) and embedded PowerPC
+systems such as Freescale PAMU. The VFIO driver is an IOMMU/device
+agnostic framework for exposing direct device access to userspace, in
+a secure, IOMMU protected environment. In other words, this allows
+safe [2]_, non-privileged, userspace drivers.
+
+Why do we want that? Virtual machines often make use of direct device
+access ("device assignment") when configured for the highest possible
+I/O performance. From a device and host perspective, this simply
+turns the VM into a userspace driver, with the benefits of
+significantly reduced latency, higher bandwidth, and direct use of
+bare-metal device drivers [3]_.
+
+Some applications, particularly in the high performance computing
+field, also benefit from low-overhead, direct device access from
+userspace. Examples include network adapters (often non-TCP/IP based)
+and compute accelerators. Prior to VFIO, these drivers had to either
+go through the full development cycle to become proper upstream
+driver, be maintained out of tree, or make use of the UIO framework,
+which has no notion of IOMMU protection, limited interrupt support,
+and requires root privileges to access things like PCI configuration
+space.
+
+The VFIO driver framework intends to unify these, replacing both the
+KVM PCI specific device assignment code as well as provide a more
+secure, more featureful userspace driver environment than UIO.
+
+Groups, Devices, and IOMMUs
+---------------------------
+
+Devices are the main target of any I/O driver. Devices typically
+create a programming interface made up of I/O access, interrupts,
+and DMA. Without going into the details of each of these, DMA is
+by far the most critical aspect for maintaining a secure environment
+as allowing a device read-write access to system memory imposes the
+greatest risk to the overall system integrity.
+
+To help mitigate this risk, many modern IOMMUs now incorporate
+isolation properties into what was, in many cases, an interface only
+meant for translation (ie. solving the addressing problems of devices
+with limited address spaces). With this, devices can now be isolated
+from each other and from arbitrary memory access, thus allowing
+things like secure direct assignment of devices into virtual machines.
+
+This isolation is not always at the granularity of a single device
+though. Even when an IOMMU is capable of this, properties of devices,
+interconnects, and IOMMU topologies can each reduce this isolation.
+For instance, an individual device may be part of a larger multi-
+function enclosure. While the IOMMU may be able to distinguish
+between devices within the enclosure, the enclosure may not require
+transactions between devices to reach the IOMMU. Examples of this
+could be anything from a multi-function PCI device with backdoors
+between functions to a non-PCI-ACS (Access Control Services) capable
+bridge allowing redirection without reaching the IOMMU. Topology
+can also play a factor in terms of hiding devices. A PCIe-to-PCI
+bridge masks the devices behind it, making transaction appear as if
+from the bridge itself. Obviously IOMMU design plays a major factor
+as well.
+
+Therefore, while for the most part an IOMMU may have device level
+granularity, any system is susceptible to reduced granularity. The
+IOMMU API therefore supports a notion of IOMMU groups. A group is
+a set of devices which is isolatable from all other devices in the
+system. Groups are therefore the unit of ownership used by VFIO.
+
+While the group is the minimum granularity that must be used to
+ensure secure user access, it's not necessarily the preferred
+granularity. In IOMMUs which make use of page tables, it may be
+possible to share a set of page tables between different groups,
+reducing the overhead both to the platform (reduced TLB thrashing,
+reduced duplicate page tables), and to the user (programming only
+a single set of translations). For this reason, VFIO makes use of
+a container class, which may hold one or more groups. A container
+is created by simply opening the /dev/vfio/vfio character device.
+
+On its own, the container provides little functionality, with all
+but a couple version and extension query interfaces locked away.
+The user needs to add a group into the container for the next level
+of functionality. To do this, the user first needs to identify the
+group associated with the desired device. This can be done using
+the sysfs links described in the example below. By unbinding the
+device from the host driver and binding it to a VFIO driver, a new
+VFIO group will appear for the group as /dev/vfio/$GROUP, where
+$GROUP is the IOMMU group number of which the device is a member.
+If the IOMMU group contains multiple devices, each will need to
+be bound to a VFIO driver before operations on the VFIO group
+are allowed (it's also sufficient to only unbind the device from
+host drivers if a VFIO driver is unavailable; this will make the
+group available, but not that particular device). TBD - interface
+for disabling driver probing/locking a device.
+
+Once the group is ready, it may be added to the container by opening
+the VFIO group character device (/dev/vfio/$GROUP) and using the
+VFIO_GROUP_SET_CONTAINER ioctl, passing the file descriptor of the
+previously opened container file. If desired and if the IOMMU driver
+supports sharing the IOMMU context between groups, multiple groups may
+be set to the same container. If a group fails to set to a container
+with existing groups, a new empty container will need to be used
+instead.
+
+With a group (or groups) attached to a container, the remaining
+ioctls become available, enabling access to the VFIO IOMMU interfaces.
+Additionally, it now becomes possible to get file descriptors for each
+device within a group using an ioctl on the VFIO group file descriptor.
+
+The VFIO device API includes ioctls for describing the device, the I/O
+regions and their read/write/mmap offsets on the device descriptor, as
+well as mechanisms for describing and registering interrupt
+notifications.
+
+VFIO Usage Example
+------------------
+
+Assume user wants to access PCI device 0000:06:0d.0::
+
+ $ readlink /sys/bus/pci/devices/0000:06:0d.0/iommu_group
+ ../../../../kernel/iommu_groups/26
+
+This device is therefore in IOMMU group 26. This device is on the
+pci bus, therefore the user will make use of vfio-pci to manage the
+group::
+
+ # modprobe vfio-pci
+
+Binding this device to the vfio-pci driver creates the VFIO group
+character devices for this group::
+
+ $ lspci -n -s 0000:06:0d.0
+ 06:0d.0 0401: 1102:0002 (rev 08)
+ # echo 0000:06:0d.0 > /sys/bus/pci/devices/0000:06:0d.0/driver/unbind
+ # echo 1102 0002 > /sys/bus/pci/drivers/vfio-pci/new_id
+
+Now we need to look at what other devices are in the group to free
+it for use by VFIO::
+
+ $ ls -l /sys/bus/pci/devices/0000:06:0d.0/iommu_group/devices
+ total 0
+ lrwxrwxrwx. 1 root root 0 Apr 23 16:13 0000:00:1e.0 ->
+ ../../../../devices/pci0000:00/0000:00:1e.0
+ lrwxrwxrwx. 1 root root 0 Apr 23 16:13 0000:06:0d.0 ->
+ ../../../../devices/pci0000:00/0000:00:1e.0/0000:06:0d.0
+ lrwxrwxrwx. 1 root root 0 Apr 23 16:13 0000:06:0d.1 ->
+ ../../../../devices/pci0000:00/0000:00:1e.0/0000:06:0d.1
+
+This device is behind a PCIe-to-PCI bridge [4]_, therefore we also
+need to add device 0000:06:0d.1 to the group following the same
+procedure as above. Device 0000:00:1e.0 is a bridge that does
+not currently have a host driver, therefore it's not required to
+bind this device to the vfio-pci driver (vfio-pci does not currently
+support PCI bridges).
+
+The final step is to provide the user with access to the group if
+unprivileged operation is desired (note that /dev/vfio/vfio provides
+no capabilities on its own and is therefore expected to be set to
+mode 0666 by the system)::
+
+ # chown user:user /dev/vfio/26
+
+The user now has full access to all the devices and the iommu for this
+group and can access them as follows::
+
+ int container, group, device, i;
+ struct vfio_group_status group_status =
+ { .argsz = sizeof(group_status) };
+ struct vfio_iommu_type1_info iommu_info = { .argsz = sizeof(iommu_info) };
+ struct vfio_iommu_type1_dma_map dma_map = { .argsz = sizeof(dma_map) };
+ struct vfio_device_info device_info = { .argsz = sizeof(device_info) };
+
+ /* Create a new container */
+ container = open("/dev/vfio/vfio", O_RDWR);
+
+ if (ioctl(container, VFIO_GET_API_VERSION) != VFIO_API_VERSION)
+ /* Unknown API version */
+
+ if (!ioctl(container, VFIO_CHECK_EXTENSION, VFIO_TYPE1_IOMMU))
+ /* Doesn't support the IOMMU driver we want. */
+
+ /* Open the group */
+ group = open("/dev/vfio/26", O_RDWR);
+
+ /* Test the group is viable and available */
+ ioctl(group, VFIO_GROUP_GET_STATUS, &group_status);
+
+ if (!(group_status.flags & VFIO_GROUP_FLAGS_VIABLE))
+ /* Group is not viable (ie, not all devices bound for vfio) */
+
+ /* Add the group to the container */
+ ioctl(group, VFIO_GROUP_SET_CONTAINER, &container);
+
+ /* Enable the IOMMU model we want */
+ ioctl(container, VFIO_SET_IOMMU, VFIO_TYPE1_IOMMU);
+
+ /* Get addition IOMMU info */
+ ioctl(container, VFIO_IOMMU_GET_INFO, &iommu_info);
+
+ /* Allocate some space and setup a DMA mapping */
+ dma_map.vaddr = mmap(0, 1024 * 1024, PROT_READ | PROT_WRITE,
+ MAP_PRIVATE | MAP_ANONYMOUS, 0, 0);
+ dma_map.size = 1024 * 1024;
+ dma_map.iova = 0; /* 1MB starting at 0x0 from device view */
+ dma_map.flags = VFIO_DMA_MAP_FLAG_READ | VFIO_DMA_MAP_FLAG_WRITE;
+
+ ioctl(container, VFIO_IOMMU_MAP_DMA, &dma_map);
+
+ /* Get a file descriptor for the device */
+ device = ioctl(group, VFIO_GROUP_GET_DEVICE_FD, "0000:06:0d.0");
+
+ /* Test and setup the device */
+ ioctl(device, VFIO_DEVICE_GET_INFO, &device_info);
+
+ for (i = 0; i < device_info.num_regions; i++) {
+ struct vfio_region_info reg = { .argsz = sizeof(reg) };
+
+ reg.index = i;
+
+ ioctl(device, VFIO_DEVICE_GET_REGION_INFO, &reg);
+
+ /* Setup mappings... read/write offsets, mmaps
+ * For PCI devices, config space is a region */
+ }
+
+ for (i = 0; i < device_info.num_irqs; i++) {
+ struct vfio_irq_info irq = { .argsz = sizeof(irq) };
+
+ irq.index = i;
+
+ ioctl(device, VFIO_DEVICE_GET_IRQ_INFO, &irq);
+
+ /* Setup IRQs... eventfds, VFIO_DEVICE_SET_IRQS */
+ }
+
+ /* Gratuitous device reset and go... */
+ ioctl(device, VFIO_DEVICE_RESET);
+
+VFIO User API
+-------------------------------------------------------------------------------
+
+Please see include/linux/vfio.h for complete API documentation.
+
+VFIO bus driver API
+-------------------------------------------------------------------------------
+
+VFIO bus drivers, such as vfio-pci make use of only a few interfaces
+into VFIO core. When devices are bound and unbound to the driver,
+the driver should call vfio_add_group_dev() and vfio_del_group_dev()
+respectively::
+
+ extern int vfio_add_group_dev(struct device *dev,
+ const struct vfio_device_ops *ops,
+ void *device_data);
+
+ extern void *vfio_del_group_dev(struct device *dev);
+
+vfio_add_group_dev() indicates to the core to begin tracking the
+iommu_group of the specified dev and register the dev as owned by
+a VFIO bus driver. The driver provides an ops structure for callbacks
+similar to a file operations structure::
+
+ struct vfio_device_ops {
+ int (*open)(void *device_data);
+ void (*release)(void *device_data);
+ ssize_t (*read)(void *device_data, char __user *buf,
+ size_t count, loff_t *ppos);
+ ssize_t (*write)(void *device_data, const char __user *buf,
+ size_t size, loff_t *ppos);
+ long (*ioctl)(void *device_data, unsigned int cmd,
+ unsigned long arg);
+ int (*mmap)(void *device_data, struct vm_area_struct *vma);
+ };
+
+Each function is passed the device_data that was originally registered
+in the vfio_add_group_dev() call above. This allows the bus driver
+an easy place to store its opaque, private data. The open/release
+callbacks are issued when a new file descriptor is created for a
+device (via VFIO_GROUP_GET_DEVICE_FD). The ioctl interface provides
+a direct pass through for VFIO_DEVICE_* ioctls. The read/write/mmap
+interfaces implement the device region access defined by the device's
+own VFIO_DEVICE_GET_REGION_INFO ioctl.
+
+
+PPC64 sPAPR implementation note
+-------------------------------
+
+This implementation has some specifics:
+
+1) On older systems (POWER7 with P5IOC2/IODA1) only one IOMMU group per
+ container is supported as an IOMMU table is allocated at the boot time,
+ one table per a IOMMU group which is a Partitionable Endpoint (PE)
+ (PE is often a PCI domain but not always).
+
+ Newer systems (POWER8 with IODA2) have improved hardware design which allows
+ to remove this limitation and have multiple IOMMU groups per a VFIO
+ container.
+
+2) The hardware supports so called DMA windows - the PCI address range
+ within which DMA transfer is allowed, any attempt to access address space
+ out of the window leads to the whole PE isolation.
+
+3) PPC64 guests are paravirtualized but not fully emulated. There is an API
+ to map/unmap pages for DMA, and it normally maps 1..32 pages per call and
+ currently there is no way to reduce the number of calls. In order to make
+ things faster, the map/unmap handling has been implemented in real mode
+ which provides an excellent performance which has limitations such as
+ inability to do locked pages accounting in real time.
+
+4) According to sPAPR specification, A Partitionable Endpoint (PE) is an I/O
+ subtree that can be treated as a unit for the purposes of partitioning and
+ error recovery. A PE may be a single or multi-function IOA (IO Adapter), a
+ function of a multi-function IOA, or multiple IOAs (possibly including
+ switch and bridge structures above the multiple IOAs). PPC64 guests detect
+ PCI errors and recover from them via EEH RTAS services, which works on the
+ basis of additional ioctl commands.
+
+ So 4 additional ioctls have been added:
+
+ VFIO_IOMMU_SPAPR_TCE_GET_INFO
+ returns the size and the start of the DMA window on the PCI bus.
+
+ VFIO_IOMMU_ENABLE
+ enables the container. The locked pages accounting
+ is done at this point. This lets user first to know what
+ the DMA window is and adjust rlimit before doing any real job.
+
+ VFIO_IOMMU_DISABLE
+ disables the container.
+
+ VFIO_EEH_PE_OP
+ provides an API for EEH setup, error detection and recovery.
+
+ The code flow from the example above should be slightly changed::
+
+ struct vfio_eeh_pe_op pe_op = { .argsz = sizeof(pe_op), .flags = 0 };
+
+ .....
+ /* Add the group to the container */
+ ioctl(group, VFIO_GROUP_SET_CONTAINER, &container);
+
+ /* Enable the IOMMU model we want */
+ ioctl(container, VFIO_SET_IOMMU, VFIO_SPAPR_TCE_IOMMU)
+
+ /* Get addition sPAPR IOMMU info */
+ vfio_iommu_spapr_tce_info spapr_iommu_info;
+ ioctl(container, VFIO_IOMMU_SPAPR_TCE_GET_INFO, &spapr_iommu_info);
+
+ if (ioctl(container, VFIO_IOMMU_ENABLE))
+ /* Cannot enable container, may be low rlimit */
+
+ /* Allocate some space and setup a DMA mapping */
+ dma_map.vaddr = mmap(0, 1024 * 1024, PROT_READ | PROT_WRITE,
+ MAP_PRIVATE | MAP_ANONYMOUS, 0, 0);
+
+ dma_map.size = 1024 * 1024;
+ dma_map.iova = 0; /* 1MB starting at 0x0 from device view */
+ dma_map.flags = VFIO_DMA_MAP_FLAG_READ | VFIO_DMA_MAP_FLAG_WRITE;
+
+ /* Check here is .iova/.size are within DMA window from spapr_iommu_info */
+ ioctl(container, VFIO_IOMMU_MAP_DMA, &dma_map);
+
+ /* Get a file descriptor for the device */
+ device = ioctl(group, VFIO_GROUP_GET_DEVICE_FD, "0000:06:0d.0");
+
+ ....
+
+ /* Gratuitous device reset and go... */
+ ioctl(device, VFIO_DEVICE_RESET);
+
+ /* Make sure EEH is supported */
+ ioctl(container, VFIO_CHECK_EXTENSION, VFIO_EEH);
+
+ /* Enable the EEH functionality on the device */
+ pe_op.op = VFIO_EEH_PE_ENABLE;
+ ioctl(container, VFIO_EEH_PE_OP, &pe_op);
+
+ /* You're suggested to create additional data struct to represent
+ * PE, and put child devices belonging to same IOMMU group to the
+ * PE instance for later reference.
+ */
+
+ /* Check the PE's state and make sure it's in functional state */
+ pe_op.op = VFIO_EEH_PE_GET_STATE;
+ ioctl(container, VFIO_EEH_PE_OP, &pe_op);
+
+ /* Save device state using pci_save_state().
+ * EEH should be enabled on the specified device.
+ */
+
+ ....
+
+ /* Inject EEH error, which is expected to be caused by 32-bits
+ * config load.
+ */
+ pe_op.op = VFIO_EEH_PE_INJECT_ERR;
+ pe_op.err.type = EEH_ERR_TYPE_32;
+ pe_op.err.func = EEH_ERR_FUNC_LD_CFG_ADDR;
+ pe_op.err.addr = 0ul;
+ pe_op.err.mask = 0ul;
+ ioctl(container, VFIO_EEH_PE_OP, &pe_op);
+
+ ....
+
+ /* When 0xFF's returned from reading PCI config space or IO BARs
+ * of the PCI device. Check the PE's state to see if that has been
+ * frozen.
+ */
+ ioctl(container, VFIO_EEH_PE_OP, &pe_op);
+
+ /* Waiting for pending PCI transactions to be completed and don't
+ * produce any more PCI traffic from/to the affected PE until
+ * recovery is finished.
+ */
+
+ /* Enable IO for the affected PE and collect logs. Usually, the
+ * standard part of PCI config space, AER registers are dumped
+ * as logs for further analysis.
+ */
+ pe_op.op = VFIO_EEH_PE_UNFREEZE_IO;
+ ioctl(container, VFIO_EEH_PE_OP, &pe_op);
+
+ /*
+ * Issue PE reset: hot or fundamental reset. Usually, hot reset
+ * is enough. However, the firmware of some PCI adapters would
+ * require fundamental reset.
+ */
+ pe_op.op = VFIO_EEH_PE_RESET_HOT;
+ ioctl(container, VFIO_EEH_PE_OP, &pe_op);
+ pe_op.op = VFIO_EEH_PE_RESET_DEACTIVATE;
+ ioctl(container, VFIO_EEH_PE_OP, &pe_op);
+
+ /* Configure the PCI bridges for the affected PE */
+ pe_op.op = VFIO_EEH_PE_CONFIGURE;
+ ioctl(container, VFIO_EEH_PE_OP, &pe_op);
+
+ /* Restored state we saved at initialization time. pci_restore_state()
+ * is good enough as an example.
+ */
+
+ /* Hopefully, error is recovered successfully. Now, you can resume to
+ * start PCI traffic to/from the affected PE.
+ */
+
+ ....
+
+5) There is v2 of SPAPR TCE IOMMU. It deprecates VFIO_IOMMU_ENABLE/
+ VFIO_IOMMU_DISABLE and implements 2 new ioctls:
+ VFIO_IOMMU_SPAPR_REGISTER_MEMORY and VFIO_IOMMU_SPAPR_UNREGISTER_MEMORY
+ (which are unsupported in v1 IOMMU).
+
+ PPC64 paravirtualized guests generate a lot of map/unmap requests,
+ and the handling of those includes pinning/unpinning pages and updating
+ mm::locked_vm counter to make sure we do not exceed the rlimit.
+ The v2 IOMMU splits accounting and pinning into separate operations:
+
+ - VFIO_IOMMU_SPAPR_REGISTER_MEMORY/VFIO_IOMMU_SPAPR_UNREGISTER_MEMORY ioctls
+ receive a user space address and size of the block to be pinned.
+ Bisecting is not supported and VFIO_IOMMU_UNREGISTER_MEMORY is expected to
+ be called with the exact address and size used for registering
+ the memory block. The userspace is not expected to call these often.
+ The ranges are stored in a linked list in a VFIO container.
+
+ - VFIO_IOMMU_MAP_DMA/VFIO_IOMMU_UNMAP_DMA ioctls only update the actual
+ IOMMU table and do not do pinning; instead these check that the userspace
+ address is from pre-registered range.
+
+ This separation helps in optimizing DMA for guests.
+
+6) sPAPR specification allows guests to have an additional DMA window(s) on
+ a PCI bus with a variable page size. Two ioctls have been added to support
+ this: VFIO_IOMMU_SPAPR_TCE_CREATE and VFIO_IOMMU_SPAPR_TCE_REMOVE.
+ The platform has to support the functionality or error will be returned to
+ the userspace. The existing hardware supports up to 2 DMA windows, one is
+ 2GB long, uses 4K pages and called "default 32bit window"; the other can
+ be as big as entire RAM, use different page size, it is optional - guests
+ create those in run-time if the guest driver supports 64bit DMA.
+
+ VFIO_IOMMU_SPAPR_TCE_CREATE receives a page shift, a DMA window size and
+ a number of TCE table levels (if a TCE table is going to be big enough and
+ the kernel may not be able to allocate enough of physically contiguous
+ memory). It creates a new window in the available slot and returns the bus
+ address where the new window starts. Due to hardware limitation, the user
+ space cannot choose the location of DMA windows.
+
+ VFIO_IOMMU_SPAPR_TCE_REMOVE receives the bus start address of the window
+ and removes it.
+
+-------------------------------------------------------------------------------
+
+.. [1] VFIO was originally an acronym for "Virtual Function I/O" in its
+ initial implementation by Tom Lyon while as Cisco. We've since
+ outgrown the acronym, but it's catchy.
+
+.. [2] "safe" also depends upon a device being "well behaved". It's
+ possible for multi-function devices to have backdoors between
+ functions and even for single function devices to have alternative
+ access to things like PCI config space through MMIO registers. To
+ guard against the former we can include additional precautions in the
+ IOMMU driver to group multi-function PCI devices together
+ (iommu=group_mf). The latter we can't prevent, but the IOMMU should
+ still provide isolation. For PCI, SR-IOV Virtual Functions are the
+ best indicator of "well behaved", as these are designed for
+ virtualization usage models.
+
+.. [3] As always there are trade-offs to virtual machine device
+ assignment that are beyond the scope of VFIO. It's expected that
+ future IOMMU technologies will reduce some, but maybe not all, of
+ these trade-offs.
+
+.. [4] In this case the device is below a PCI bridge, so transactions
+ from either function of the device are indistinguishable to the iommu::
+
+ -[0000:00]-+-1e.0-[06]--+-0d.0
+ \-0d.1
+
+ 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90)
diff --git a/Documentation/driver-api/xilinx/eemi.rst b/Documentation/driver-api/xilinx/eemi.rst
new file mode 100644
index 000000000000..9dcbc6f18d75
--- /dev/null
+++ b/Documentation/driver-api/xilinx/eemi.rst
@@ -0,0 +1,67 @@
+====================================
+Xilinx Zynq MPSoC EEMI Documentation
+====================================
+
+Xilinx Zynq MPSoC Firmware Interface
+-------------------------------------
+The zynqmp-firmware node describes the interface to platform firmware.
+ZynqMP has an interface to communicate with secure firmware. Firmware
+driver provides an interface to firmware APIs. Interface APIs can be
+used by any driver to communicate with PMC(Platform Management Controller).
+
+Embedded Energy Management Interface (EEMI)
+----------------------------------------------
+The embedded energy management interface is used to allow software
+components running across different processing clusters on a chip or
+device to communicate with a power management controller (PMC) on a
+device to issue or respond to power management requests.
+
+EEMI ops is a structure containing all eemi APIs supported by Zynq MPSoC.
+The zynqmp-firmware driver maintain all EEMI APIs in zynqmp_eemi_ops
+structure. Any driver who want to communicate with PMC using EEMI APIs
+can call zynqmp_pm_get_eemi_ops().
+
+Example of EEMI ops::
+
+ /* zynqmp-firmware driver maintain all EEMI APIs */
+ struct zynqmp_eemi_ops {
+ int (*get_api_version)(u32 *version);
+ int (*query_data)(struct zynqmp_pm_query_data qdata, u32 *out);
+ };
+
+ static const struct zynqmp_eemi_ops eemi_ops = {
+ .get_api_version = zynqmp_pm_get_api_version,
+ .query_data = zynqmp_pm_query_data,
+ };
+
+Example of EEMI ops usage::
+
+ static const struct zynqmp_eemi_ops *eemi_ops;
+ u32 ret_payload[PAYLOAD_ARG_CNT];
+ int ret;
+
+ eemi_ops = zynqmp_pm_get_eemi_ops();
+ if (IS_ERR(eemi_ops))
+ return PTR_ERR(eemi_ops);
+
+ ret = eemi_ops->query_data(qdata, ret_payload);
+
+IOCTL
+------
+IOCTL API is for device control and configuration. It is not a system
+IOCTL but it is an EEMI API. This API can be used by master to control
+any device specific configuration. IOCTL definitions can be platform
+specific. This API also manage shared device configuration.
+
+The following IOCTL IDs are valid for device control:
+- IOCTL_SET_PLL_FRAC_MODE 8
+- IOCTL_GET_PLL_FRAC_MODE 9
+- IOCTL_SET_PLL_FRAC_DATA 10
+- IOCTL_GET_PLL_FRAC_DATA 11
+
+Refer EEMI API guide [0] for IOCTL specific parameters and other EEMI APIs.
+
+References
+----------
+[0] Embedded Energy Management Interface (EEMI) API guide:
+ https://www.xilinx.com/support/documentation/user_guides/ug1200-eemi-api.pdf
diff --git a/Documentation/driver-api/xilinx/index.rst b/Documentation/driver-api/xilinx/index.rst
new file mode 100644
index 000000000000..13f7589ed442
--- /dev/null
+++ b/Documentation/driver-api/xilinx/index.rst
@@ -0,0 +1,16 @@
+
+===========
+Xilinx FPGA
+===========
+
+.. toctree::
+ :maxdepth: 1
+
+ eemi
+
+.. only:: subproject and html
+
+ Indices
+ =======
+
+ * :ref:`genindex`
diff --git a/Documentation/driver-api/xillybus.rst b/Documentation/driver-api/xillybus.rst
new file mode 100644
index 000000000000..2446ee303c09
--- /dev/null
+++ b/Documentation/driver-api/xillybus.rst
@@ -0,0 +1,379 @@
+==========================================
+Xillybus driver for generic FPGA interface
+==========================================
+
+:Author: Eli Billauer, Xillybus Ltd. (http://xillybus.com)
+:Email: eli.billauer@gmail.com or as advertised on Xillybus' site.
+
+.. Contents:
+
+ - Introduction
+ -- Background
+ -- Xillybus Overview
+
+ - Usage
+ -- User interface
+ -- Synchronization
+ -- Seekable pipes
+
+ - Internals
+ -- Source code organization
+ -- Pipe attributes
+ -- Host never reads from the FPGA
+ -- Channels, pipes, and the message channel
+ -- Data streaming
+ -- Data granularity
+ -- Probing
+ -- Buffer allocation
+ -- The "nonempty" message (supporting poll)
+
+
+Introduction
+============
+
+Background
+----------
+
+An FPGA (Field Programmable Gate Array) is a piece of logic hardware, which
+can be programmed to become virtually anything that is usually found as a
+dedicated chipset: For instance, a display adapter, network interface card,
+or even a processor with its peripherals. FPGAs are the LEGO of hardware:
+Based upon certain building blocks, you make your own toys the way you like
+them. It's usually pointless to reimplement something that is already
+available on the market as a chipset, so FPGAs are mostly used when some
+special functionality is needed, and the production volume is relatively low
+(hence not justifying the development of an ASIC).
+
+The challenge with FPGAs is that everything is implemented at a very low
+level, even lower than assembly language. In order to allow FPGA designers to
+focus on their specific project, and not reinvent the wheel over and over
+again, pre-designed building blocks, IP cores, are often used. These are the
+FPGA parallels of library functions. IP cores may implement certain
+mathematical functions, a functional unit (e.g. a USB interface), an entire
+processor (e.g. ARM) or anything that might come handy. Think of them as a
+building block, with electrical wires dangling on the sides for connection to
+other blocks.
+
+One of the daunting tasks in FPGA design is communicating with a fullblown
+operating system (actually, with the processor running it): Implementing the
+low-level bus protocol and the somewhat higher-level interface with the host
+(registers, interrupts, DMA etc.) is a project in itself. When the FPGA's
+function is a well-known one (e.g. a video adapter card, or a NIC), it can
+make sense to design the FPGA's interface logic specifically for the project.
+A special driver is then written to present the FPGA as a well-known interface
+to the kernel and/or user space. In that case, there is no reason to treat the
+FPGA differently than any device on the bus.
+
+It's however common that the desired data communication doesn't fit any well-
+known peripheral function. Also, the effort of designing an elegant
+abstraction for the data exchange is often considered too big. In those cases,
+a quicker and possibly less elegant solution is sought: The driver is
+effectively written as a user space program, leaving the kernel space part
+with just elementary data transport. This still requires designing some
+interface logic for the FPGA, and write a simple ad-hoc driver for the kernel.
+
+Xillybus Overview
+-----------------
+
+Xillybus is an IP core and a Linux driver. Together, they form a kit for
+elementary data transport between an FPGA and the host, providing pipe-like
+data streams with a straightforward user interface. It's intended as a low-
+effort solution for mixed FPGA-host projects, for which it makes sense to
+have the project-specific part of the driver running in a user-space program.
+
+Since the communication requirements may vary significantly from one FPGA
+project to another (the number of data pipes needed in each direction and
+their attributes), there isn't one specific chunk of logic being the Xillybus
+IP core. Rather, the IP core is configured and built based upon a
+specification given by its end user.
+
+Xillybus presents independent data streams, which resemble pipes or TCP/IP
+communication to the user. At the host side, a character device file is used
+just like any pipe file. On the FPGA side, hardware FIFOs are used to stream
+the data. This is contrary to a common method of communicating through fixed-
+sized buffers (even though such buffers are used by Xillybus under the hood).
+There may be more than a hundred of these streams on a single IP core, but
+also no more than one, depending on the configuration.
+
+In order to ease the deployment of the Xillybus IP core, it contains a simple
+data structure which completely defines the core's configuration. The Linux
+driver fetches this data structure during its initialization process, and sets
+up the DMA buffers and character devices accordingly. As a result, a single
+driver is used to work out of the box with any Xillybus IP core.
+
+The data structure just mentioned should not be confused with PCI's
+configuration space or the Flattened Device Tree.
+
+Usage
+=====
+
+User interface
+--------------
+
+On the host, all interface with Xillybus is done through /dev/xillybus_*
+device files, which are generated automatically as the drivers loads. The
+names of these files depend on the IP core that is loaded in the FPGA (see
+Probing below). To communicate with the FPGA, open the device file that
+corresponds to the hardware FIFO you want to send data or receive data from,
+and use plain write() or read() calls, just like with a regular pipe. In
+particular, it makes perfect sense to go::
+
+ $ cat mydata > /dev/xillybus_thisfifo
+
+ $ cat /dev/xillybus_thatfifo > hisdata
+
+possibly pressing CTRL-C as some stage, even though the xillybus_* pipes have
+the capability to send an EOF (but may not use it).
+
+The driver and hardware are designed to behave sensibly as pipes, including:
+
+* Supporting non-blocking I/O (by setting O_NONBLOCK on open() ).
+
+* Supporting poll() and select().
+
+* Being bandwidth efficient under load (using DMA) but also handle small
+ pieces of data sent across (like TCP/IP) by autoflushing.
+
+A device file can be read only, write only or bidirectional. Bidirectional
+device files are treated like two independent pipes (except for sharing a
+"channel" structure in the implementation code).
+
+Synchronization
+---------------
+
+Xillybus pipes are configured (on the IP core) to be either synchronous or
+asynchronous. For a synchronous pipe, write() returns successfully only after
+some data has been submitted and acknowledged by the FPGA. This slows down
+bulk data transfers, and is nearly impossible for use with streams that
+require data at a constant rate: There is no data transmitted to the FPGA
+between write() calls, in particular when the process loses the CPU.
+
+When a pipe is configured asynchronous, write() returns if there was enough
+room in the buffers to store any of the data in the buffers.
+
+For FPGA to host pipes, asynchronous pipes allow data transfer from the FPGA
+as soon as the respective device file is opened, regardless of if the data
+has been requested by a read() call. On synchronous pipes, only the amount
+of data requested by a read() call is transmitted.
+
+In summary, for synchronous pipes, data between the host and FPGA is
+transmitted only to satisfy the read() or write() call currently handled
+by the driver, and those calls wait for the transmission to complete before
+returning.
+
+Note that the synchronization attribute has nothing to do with the possibility
+that read() or write() completes less bytes than requested. There is a
+separate configuration flag ("allowpartial") that determines whether such a
+partial completion is allowed.
+
+Seekable pipes
+--------------
+
+A synchronous pipe can be configured to have the stream's position exposed
+to the user logic at the FPGA. Such a pipe is also seekable on the host API.
+With this feature, a memory or register interface can be attached on the
+FPGA side to the seekable stream. Reading or writing to a certain address in
+the attached memory is done by seeking to the desired address, and calling
+read() or write() as required.
+
+
+Internals
+=========
+
+Source code organization
+------------------------
+
+The Xillybus driver consists of a core module, xillybus_core.c, and modules
+that depend on the specific bus interface (xillybus_of.c and xillybus_pcie.c).
+
+The bus specific modules are those probed when a suitable device is found by
+the kernel. Since the DMA mapping and synchronization functions, which are bus
+dependent by their nature, are used by the core module, a
+xilly_endpoint_hardware structure is passed to the core module on
+initialization. This structure is populated with pointers to wrapper functions
+which execute the DMA-related operations on the bus.
+
+Pipe attributes
+---------------
+
+Each pipe has a number of attributes which are set when the FPGA component
+(IP core) is built. They are fetched from the IDT (the data structure which
+defines the core's configuration, see Probing below) by xilly_setupchannels()
+in xillybus_core.c as follows:
+
+* is_writebuf: The pipe's direction. A non-zero value means it's an FPGA to
+ host pipe (the FPGA "writes").
+
+* channelnum: The pipe's identification number in communication between the
+ host and FPGA.
+
+* format: The underlying data width. See Data Granularity below.
+
+* allowpartial: A non-zero value means that a read() or write() (whichever
+ applies) may return with less than the requested number of bytes. The common
+ choice is a non-zero value, to match standard UNIX behavior.
+
+* synchronous: A non-zero value means that the pipe is synchronous. See
+ Synchronization above.
+
+* bufsize: Each DMA buffer's size. Always a power of two.
+
+* bufnum: The number of buffers allocated for this pipe. Always a power of two.
+
+* exclusive_open: A non-zero value forces exclusive opening of the associated
+ device file. If the device file is bidirectional, and already opened only in
+ one direction, the opposite direction may be opened once.
+
+* seekable: A non-zero value indicates that the pipe is seekable. See
+ Seekable pipes above.
+
+* supports_nonempty: A non-zero value (which is typical) indicates that the
+ hardware will send the messages that are necessary to support select() and
+ poll() for this pipe.
+
+Host never reads from the FPGA
+------------------------------
+
+Even though PCI Express is hotpluggable in general, a typical motherboard
+doesn't expect a card to go away all of the sudden. But since the PCIe card
+is based upon reprogrammable logic, a sudden disappearance from the bus is
+quite likely as a result of an accidental reprogramming of the FPGA while the
+host is up. In practice, nothing happens immediately in such a situation. But
+if the host attempts to read from an address that is mapped to the PCI Express
+device, that leads to an immediate freeze of the system on some motherboards,
+even though the PCIe standard requires a graceful recovery.
+
+In order to avoid these freezes, the Xillybus driver refrains completely from
+reading from the device's register space. All communication from the FPGA to
+the host is done through DMA. In particular, the Interrupt Service Routine
+doesn't follow the common practice of checking a status register when it's
+invoked. Rather, the FPGA prepares a small buffer which contains short
+messages, which inform the host what the interrupt was about.
+
+This mechanism is used on non-PCIe buses as well for the sake of uniformity.
+
+
+Channels, pipes, and the message channel
+----------------------------------------
+
+Each of the (possibly bidirectional) pipes presented to the user is allocated
+a data channel between the FPGA and the host. The distinction between channels
+and pipes is necessary only because of channel 0, which is used for interrupt-
+related messages from the FPGA, and has no pipe attached to it.
+
+Data streaming
+--------------
+
+Even though a non-segmented data stream is presented to the user at both
+sides, the implementation relies on a set of DMA buffers which is allocated
+for each channel. For the sake of illustration, let's take the FPGA to host
+direction: As data streams into the respective channel's interface in the
+FPGA, the Xillybus IP core writes it to one of the DMA buffers. When the
+buffer is full, the FPGA informs the host about that (appending a
+XILLYMSG_OPCODE_RELEASEBUF message channel 0 and sending an interrupt if
+necessary). The host responds by making the data available for reading through
+the character device. When all data has been read, the host writes on the
+the FPGA's buffer control register, allowing the buffer's overwriting. Flow
+control mechanisms exist on both sides to prevent underflows and overflows.
+
+This is not good enough for creating a TCP/IP-like stream: If the data flow
+stops momentarily before a DMA buffer is filled, the intuitive expectation is
+that the partial data in buffer will arrive anyhow, despite the buffer not
+being completed. This is implemented by adding a field in the
+XILLYMSG_OPCODE_RELEASEBUF message, through which the FPGA informs not just
+which buffer is submitted, but how much data it contains.
+
+But the FPGA will submit a partially filled buffer only if directed to do so
+by the host. This situation occurs when the read() method has been blocking
+for XILLY_RX_TIMEOUT jiffies (currently 10 ms), after which the host commands
+the FPGA to submit a DMA buffer as soon as it can. This timeout mechanism
+balances between bus bandwidth efficiency (preventing a lot of partially
+filled buffers being sent) and a latency held fairly low for tails of data.
+
+A similar setting is used in the host to FPGA direction. The handling of
+partial DMA buffers is somewhat different, though. The user can tell the
+driver to submit all data it has in the buffers to the FPGA, by issuing a
+write() with the byte count set to zero. This is similar to a flush request,
+but it doesn't block. There is also an autoflushing mechanism, which triggers
+an equivalent flush roughly XILLY_RX_TIMEOUT jiffies after the last write().
+This allows the user to be oblivious about the underlying buffering mechanism
+and yet enjoy a stream-like interface.
+
+Note that the issue of partial buffer flushing is irrelevant for pipes having
+the "synchronous" attribute nonzero, since synchronous pipes don't allow data
+to lay around in the DMA buffers between read() and write() anyhow.
+
+Data granularity
+----------------
+
+The data arrives or is sent at the FPGA as 8, 16 or 32 bit wide words, as
+configured by the "format" attribute. Whenever possible, the driver attempts
+to hide this when the pipe is accessed differently from its natural alignment.
+For example, reading single bytes from a pipe with 32 bit granularity works
+with no issues. Writing single bytes to pipes with 16 or 32 bit granularity
+will also work, but the driver can't send partially completed words to the
+FPGA, so the transmission of up to one word may be held until it's fully
+occupied with user data.
+
+This somewhat complicates the handling of host to FPGA streams, because
+when a buffer is flushed, it may contain up to 3 bytes don't form a word in
+the FPGA, and hence can't be sent. To prevent loss of data, these leftover
+bytes need to be moved to the next buffer. The parts in xillybus_core.c
+that mention "leftovers" in some way are related to this complication.
+
+Probing
+-------
+
+As mentioned earlier, the number of pipes that are created when the driver
+loads and their attributes depend on the Xillybus IP core in the FPGA. During
+the driver's initialization, a blob containing configuration info, the
+Interface Description Table (IDT), is sent from the FPGA to the host. The
+bootstrap process is done in three phases:
+
+1. Acquire the length of the IDT, so a buffer can be allocated for it. This
+ is done by sending a quiesce command to the device, since the acknowledge
+ for this command contains the IDT's buffer length.
+
+2. Acquire the IDT itself.
+
+3. Create the interfaces according to the IDT.
+
+Buffer allocation
+-----------------
+
+In order to simplify the logic that prevents illegal boundary crossings of
+PCIe packets, the following rule applies: If a buffer is smaller than 4kB,
+it must not cross a 4kB boundary. Otherwise, it must be 4kB aligned. The
+xilly_setupchannels() functions allocates these buffers by requesting whole
+pages from the kernel, and diving them into DMA buffers as necessary. Since
+all buffers' sizes are powers of two, it's possible to pack any set of such
+buffers, with a maximal waste of one page of memory.
+
+All buffers are allocated when the driver is loaded. This is necessary,
+since large continuous physical memory segments are sometimes requested,
+which are more likely to be available when the system is freshly booted.
+
+The allocation of buffer memory takes place in the same order they appear in
+the IDT. The driver relies on a rule that the pipes are sorted with decreasing
+buffer size in the IDT. If a requested buffer is larger or equal to a page,
+the necessary number of pages is requested from the kernel, and these are
+used for this buffer. If the requested buffer is smaller than a page, one
+single page is requested from the kernel, and that page is partially used.
+Or, if there already is a partially used page at hand, the buffer is packed
+into that page. It can be shown that all pages requested from the kernel
+(except possibly for the last) are 100% utilized this way.
+
+The "nonempty" message (supporting poll)
+----------------------------------------
+
+In order to support the "poll" method (and hence select() ), there is a small
+catch regarding the FPGA to host direction: The FPGA may have filled a DMA
+buffer with some data, but not submitted that buffer. If the host waited for
+the buffer's submission by the FPGA, there would be a possibility that the
+FPGA side has sent data, but a select() call would still block, because the
+host has not received any notification about this. This is solved with
+XILLYMSG_OPCODE_NONEMPTY messages sent by the FPGA when a channel goes from
+completely empty to containing some data.
+
+These messages are used only to support poll() and select(). The IP core can
+be configured not to send them for a slight reduction of bandwidth.
diff --git a/Documentation/driver-api/zorro.rst b/Documentation/driver-api/zorro.rst
new file mode 100644
index 000000000000..664072b017e3
--- /dev/null
+++ b/Documentation/driver-api/zorro.rst
@@ -0,0 +1,104 @@
+========================================
+Writing Device Drivers for Zorro Devices
+========================================
+
+:Author: Written by Geert Uytterhoeven <geert@linux-m68k.org>
+:Last revised: September 5, 2003
+
+
+Introduction
+------------
+
+The Zorro bus is the bus used in the Amiga family of computers. Thanks to
+AutoConfig(tm), it's 100% Plug-and-Play.
+
+There are two types of Zorro buses, Zorro II and Zorro III:
+
+ - The Zorro II address space is 24-bit and lies within the first 16 MB of the
+ Amiga's address map.
+
+ - Zorro III is a 32-bit extension of Zorro II, which is backwards compatible
+ with Zorro II. The Zorro III address space lies outside the first 16 MB.
+
+
+Probing for Zorro Devices
+-------------------------
+
+Zorro devices are found by calling ``zorro_find_device()``, which returns a
+pointer to the ``next`` Zorro device with the specified Zorro ID. A probe loop
+for the board with Zorro ID ``ZORRO_PROD_xxx`` looks like::
+
+ struct zorro_dev *z = NULL;
+
+ while ((z = zorro_find_device(ZORRO_PROD_xxx, z))) {
+ if (!zorro_request_region(z->resource.start+MY_START, MY_SIZE,
+ "My explanation"))
+ ...
+ }
+
+``ZORRO_WILDCARD`` acts as a wildcard and finds any Zorro device. If your driver
+supports different types of boards, you can use a construct like::
+
+ struct zorro_dev *z = NULL;
+
+ while ((z = zorro_find_device(ZORRO_WILDCARD, z))) {
+ if (z->id != ZORRO_PROD_xxx1 && z->id != ZORRO_PROD_xxx2 && ...)
+ continue;
+ if (!zorro_request_region(z->resource.start+MY_START, MY_SIZE,
+ "My explanation"))
+ ...
+ }
+
+
+Zorro Resources
+---------------
+
+Before you can access a Zorro device's registers, you have to make sure it's
+not yet in use. This is done using the I/O memory space resource management
+functions::
+
+ request_mem_region()
+ release_mem_region()
+
+Shortcuts to claim the whole device's address space are provided as well::
+
+ zorro_request_device
+ zorro_release_device
+
+
+Accessing the Zorro Address Space
+---------------------------------
+
+The address regions in the Zorro device resources are Zorro bus address
+regions. Due to the identity bus-physical address mapping on the Zorro bus,
+they are CPU physical addresses as well.
+
+The treatment of these regions depends on the type of Zorro space:
+
+ - Zorro II address space is always mapped and does not have to be mapped
+ explicitly using z_ioremap().
+
+ Conversion from bus/physical Zorro II addresses to kernel virtual addresses
+ and vice versa is done using::
+
+ virt_addr = ZTWO_VADDR(bus_addr);
+ bus_addr = ZTWO_PADDR(virt_addr);
+
+ - Zorro III address space must be mapped explicitly using z_ioremap() first
+ before it can be accessed::
+
+ virt_addr = z_ioremap(bus_addr, size);
+ ...
+ z_iounmap(virt_addr);
+
+
+References
+----------
+
+#. linux/include/linux/zorro.h
+#. linux/include/uapi/linux/zorro.h
+#. linux/include/uapi/linux/zorro_ids.h
+#. linux/arch/m68k/include/asm/zorro.h
+#. linux/drivers/zorro
+#. /proc/bus/zorro
+