diff options
Diffstat (limited to 'Documentation/networking/device_drivers')
5 files changed, 94 insertions, 4 deletions
diff --git a/Documentation/networking/device_drivers/ethernet/amazon/ena.rst b/Documentation/networking/device_drivers/ethernet/amazon/ena.rst index b842bcb14255..a4c7d0c65fd7 100644 --- a/Documentation/networking/device_drivers/ethernet/amazon/ena.rst +++ b/Documentation/networking/device_drivers/ethernet/amazon/ena.rst @@ -211,10 +211,16 @@ Documentation/networking/net_dim.rst RX copybreak ============ + The rx_copybreak is initialized by default to ENA_DEFAULT_RX_COPYBREAK and can be configured by the ETHTOOL_STUNABLE command of the SIOCETHTOOL ioctl. +This option controls the maximum packet length for which the RX +descriptor it was received on would be recycled. When a packet smaller +than RX copybreak bytes is received, it is copied into a new memory +buffer and the RX descriptor is returned to HW. + Statistics ========== diff --git a/Documentation/networking/device_drivers/ethernet/index.rst b/Documentation/networking/device_drivers/ethernet/index.rst index 43de285b8a92..6932d8c043c2 100644 --- a/Documentation/networking/device_drivers/ethernet/index.rst +++ b/Documentation/networking/device_drivers/ethernet/index.rst @@ -42,6 +42,7 @@ Contents: intel/ice marvell/octeontx2 marvell/octeon_ep + marvell/octeon_ep_vf mellanox/mlx5/index microsoft/netvsc neterion/s2io diff --git a/Documentation/networking/device_drivers/ethernet/intel/ice.rst b/Documentation/networking/device_drivers/ethernet/intel/ice.rst index 5038e54586af..934752f675ba 100644 --- a/Documentation/networking/device_drivers/ethernet/intel/ice.rst +++ b/Documentation/networking/device_drivers/ethernet/intel/ice.rst @@ -368,15 +368,28 @@ more options for Receive Side Scaling (RSS) hash byte configuration. # ethtool -N <ethX> rx-flow-hash <type> <option> Where <type> is: - tcp4 signifying TCP over IPv4 - udp4 signifying UDP over IPv4 - tcp6 signifying TCP over IPv6 - udp6 signifying UDP over IPv6 + tcp4 signifying TCP over IPv4 + udp4 signifying UDP over IPv4 + gtpc4 signifying GTP-C over IPv4 + gtpc4t signifying GTP-C (include TEID) over IPv4 + gtpu4 signifying GTP-U over IPV4 + gtpu4e signifying GTP-U and Extension Header over IPV4 + gtpu4u signifying GTP-U PSC Uplink over IPV4 + gtpu4d signifying GTP-U PSC Downlink over IPV4 + tcp6 signifying TCP over IPv6 + udp6 signifying UDP over IPv6 + gtpc6 signifying GTP-C over IPv6 + gtpc6t signifying GTP-C (include TEID) over IPv6 + gtpu6 signifying GTP-U over IPV6 + gtpu6e signifying GTP-U and Extension Header over IPV6 + gtpu6u signifying GTP-U PSC Uplink over IPV6 + gtpu6d signifying GTP-U PSC Downlink over IPV6 And <option> is one or more of: s Hash on the IP source address of the Rx packet. d Hash on the IP destination address of the Rx packet. f Hash on bytes 0 and 1 of the Layer 4 header of the Rx packet. n Hash on bytes 2 and 3 of the Layer 4 header of the Rx packet. + e Hash on GTP Packet on TEID (4bytes) of the Rx packet. Accelerated Receive Flow Steering (aRFS) diff --git a/Documentation/networking/device_drivers/ethernet/marvell/octeon_ep_vf.rst b/Documentation/networking/device_drivers/ethernet/marvell/octeon_ep_vf.rst new file mode 100644 index 000000000000..603133d0b92f --- /dev/null +++ b/Documentation/networking/device_drivers/ethernet/marvell/octeon_ep_vf.rst @@ -0,0 +1,24 @@ +.. SPDX-License-Identifier: GPL-2.0+ + +======================================================================= +Linux kernel networking driver for Marvell's Octeon PCI Endpoint NIC VF +======================================================================= + +Network driver for Marvell's Octeon PCI EndPoint NIC VF. +Copyright (c) 2020 Marvell International Ltd. + +Overview +======== +This driver implements networking functionality of Marvell's Octeon PCI +EndPoint NIC VF. + +Supported Devices +================= +Currently, this driver support following devices: + * Network controller: Cavium, Inc. Device b203 + * Network controller: Cavium, Inc. Device b403 + * Network controller: Cavium, Inc. Device b103 + * Network controller: Cavium, Inc. Device b903 + * Network controller: Cavium, Inc. Device ba03 + * Network controller: Cavium, Inc. Device bc03 + * Network controller: Cavium, Inc. Device bd03 diff --git a/Documentation/networking/device_drivers/wwan/t7xx.rst b/Documentation/networking/device_drivers/wwan/t7xx.rst index dd5b731957ca..f346f5f85f15 100644 --- a/Documentation/networking/device_drivers/wwan/t7xx.rst +++ b/Documentation/networking/device_drivers/wwan/t7xx.rst @@ -39,6 +39,34 @@ command and receive response: - open the AT control channel using a UART tool or a special user tool +Sysfs +===== +The driver provides sysfs interfaces to userspace. + +t7xx_mode +--------- +The sysfs interface provides userspace with access to the device mode, this interface +supports read and write operations. + +Device mode: + +- ``unknown`` represents that device in unknown status +- ``ready`` represents that device in ready status +- ``reset`` represents that device in reset status +- ``fastboot_switching`` represents that device in fastboot switching status +- ``fastboot_download`` represents that device in fastboot download status +- ``fastboot_dump`` represents that device in fastboot dump status + +Read from userspace to get the current device mode. + +:: + $ cat /sys/bus/pci/devices/${bdf}/t7xx_mode + +Write from userspace to set the device mode. + +:: + $ echo fastboot_switching > /sys/bus/pci/devices/${bdf}/t7xx_mode + Management application development ================================== The driver and userspace interfaces are described below. The MBIM protocol is @@ -97,6 +125,20 @@ The driver exposes an AT port by implementing AT WWAN Port. The userspace end of the control port is a /dev/wwan0at0 character device. Application shall use this interface to issue AT commands. +fastboot port userspace ABI +--------------------------- + +/dev/wwan0fastboot0 character device +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +The driver exposes a fastboot protocol interface by implementing +fastboot WWAN Port. The userspace end of the fastboot channel pipe is a +/dev/wwan0fastboot0 character device. Application shall use this interface for +fastboot protocol communication. + +Please note that driver needs to be reloaded to export /dev/wwan0fastboot0 +port, because device needs a cold reset after enter ``fastboot_switching`` +mode. + The MediaTek's T700 modem supports the 3GPP TS 27.007 [4] specification. References @@ -118,3 +160,7 @@ speak the Mobile Interface Broadband Model (MBIM) protocol"* [4] *Specification # 27.007 - 3GPP* - https://www.3gpp.org/DynaReport/27007.htm + +[5] *fastboot "a mechanism for communicating with bootloaders"* + +- https://android.googlesource.com/platform/system/core/+/refs/heads/main/fastboot/README.md |