diff options
Diffstat (limited to 'Documentation')
-rw-r--r-- | Documentation/PCI/MSI-HOWTO.txt | 24 | ||||
-rw-r--r-- | Documentation/PCI/pci.txt | 1 | ||||
-rw-r--r-- | Documentation/arm64/silicon-errata.txt | 1 | ||||
-rw-r--r-- | Documentation/conf.py | 2 | ||||
-rw-r--r-- | Documentation/devicetree/bindings/sound/omap-mcpdm.txt | 10 | ||||
-rw-r--r-- | Documentation/devicetree/bindings/thermal/thermal.txt | 10 | ||||
-rw-r--r-- | Documentation/filesystems/overlayfs.txt | 8 | ||||
-rw-r--r-- | Documentation/hwmon/ftsteutates | 4 | ||||
-rw-r--r-- | Documentation/kernel-documentation.rst | 6 | ||||
-rw-r--r-- | Documentation/kernel-parameters.txt | 4 | ||||
-rw-r--r-- | Documentation/networking/dsa/dsa.txt | 20 | ||||
-rw-r--r-- | Documentation/networking/rxrpc.txt | 21 | ||||
-rw-r--r-- | Documentation/power/basic-pm-debugging.txt | 27 | ||||
-rw-r--r-- | Documentation/power/interface.txt | 151 | ||||
-rw-r--r-- | Documentation/powerpc/transactional_memory.txt | 2 | ||||
-rw-r--r-- | Documentation/rapidio/mport_cdev.txt | 4 | ||||
-rw-r--r-- | Documentation/sphinx-static/theme_overrides.css | 3 |
17 files changed, 147 insertions, 151 deletions
diff --git a/Documentation/PCI/MSI-HOWTO.txt b/Documentation/PCI/MSI-HOWTO.txt index c55df2911136..cd9c9f6a7cd9 100644 --- a/Documentation/PCI/MSI-HOWTO.txt +++ b/Documentation/PCI/MSI-HOWTO.txt @@ -94,14 +94,11 @@ has a requirements for a minimum number of vectors the driver can pass a min_vecs argument set to this limit, and the PCI core will return -ENOSPC if it can't meet the minimum number of vectors. -The flags argument should normally be set to 0, but can be used to pass the -PCI_IRQ_NOMSI and PCI_IRQ_NOMSIX flag in case a device claims to support -MSI or MSI-X, but the support is broken, or to pass PCI_IRQ_NOLEGACY in -case the device does not support legacy interrupt lines. - -By default this function will spread the interrupts around the available -CPUs, but this feature can be disabled by passing the PCI_IRQ_NOAFFINITY -flag. +The flags argument is used to specify which type of interrupt can be used +by the device and the driver (PCI_IRQ_LEGACY, PCI_IRQ_MSI, PCI_IRQ_MSIX). +A convenient short-hand (PCI_IRQ_ALL_TYPES) is also available to ask for +any possible kind of interrupt. If the PCI_IRQ_AFFINITY flag is set, +pci_alloc_irq_vectors() will spread the interrupts around the available CPUs. To get the Linux IRQ numbers passed to request_irq() and free_irq() and the vectors, use the following function: @@ -131,7 +128,7 @@ larger than the number supported by the device it will automatically be capped to the supported limit, so there is no need to query the number of vectors supported beforehand: - nvec = pci_alloc_irq_vectors(pdev, 1, nvec, 0); + nvec = pci_alloc_irq_vectors(pdev, 1, nvec, PCI_IRQ_ALL_TYPES) if (nvec < 0) goto out_err; @@ -140,7 +137,7 @@ interrupts it can request a particular number of interrupts by passing that number to pci_alloc_irq_vectors() function as both 'min_vecs' and 'max_vecs' parameters: - ret = pci_alloc_irq_vectors(pdev, nvec, nvec, 0); + ret = pci_alloc_irq_vectors(pdev, nvec, nvec, PCI_IRQ_ALL_TYPES); if (ret < 0) goto out_err; @@ -148,15 +145,14 @@ The most notorious example of the request type described above is enabling the single MSI mode for a device. It could be done by passing two 1s as 'min_vecs' and 'max_vecs': - ret = pci_alloc_irq_vectors(pdev, 1, 1, 0); + ret = pci_alloc_irq_vectors(pdev, 1, 1, PCI_IRQ_ALL_TYPES); if (ret < 0) goto out_err; Some devices might not support using legacy line interrupts, in which case -the PCI_IRQ_NOLEGACY flag can be used to fail the request if the platform -can't provide MSI or MSI-X interrupts: +the driver can specify that only MSI or MSI-X is acceptable: - nvec = pci_alloc_irq_vectors(pdev, 1, nvec, PCI_IRQ_NOLEGACY); + nvec = pci_alloc_irq_vectors(pdev, 1, nvec, PCI_IRQ_MSI | PCI_IRQ_MSIX); if (nvec < 0) goto out_err; diff --git a/Documentation/PCI/pci.txt b/Documentation/PCI/pci.txt index 123881f62219..77f49dc5be23 100644 --- a/Documentation/PCI/pci.txt +++ b/Documentation/PCI/pci.txt @@ -124,7 +124,6 @@ initialization with a pointer to a structure describing the driver The ID table is an array of struct pci_device_id entries ending with an all-zero entry. Definitions with static const are generally preferred. -Use of the deprecated macro DEFINE_PCI_DEVICE_TABLE should be avoided. Each entry consists of: diff --git a/Documentation/arm64/silicon-errata.txt b/Documentation/arm64/silicon-errata.txt index 4da60b463995..ccc60324e738 100644 --- a/Documentation/arm64/silicon-errata.txt +++ b/Documentation/arm64/silicon-errata.txt @@ -53,6 +53,7 @@ stable kernels. | ARM | Cortex-A57 | #832075 | ARM64_ERRATUM_832075 | | ARM | Cortex-A57 | #852523 | N/A | | ARM | Cortex-A57 | #834220 | ARM64_ERRATUM_834220 | +| ARM | Cortex-A72 | #853709 | N/A | | ARM | MMU-500 | #841119,#826419 | N/A | | | | | | | Cavium | ThunderX ITS | #22375, #24313 | CAVIUM_ERRATUM_22375 | diff --git a/Documentation/conf.py b/Documentation/conf.py index 96b7aa66c89c..106ae9c740b9 100644 --- a/Documentation/conf.py +++ b/Documentation/conf.py @@ -131,7 +131,7 @@ pygments_style = 'sphinx' todo_include_todos = False primary_domain = 'C' -highlight_language = 'C' +highlight_language = 'guess' # -- Options for HTML output ---------------------------------------------- diff --git a/Documentation/devicetree/bindings/sound/omap-mcpdm.txt b/Documentation/devicetree/bindings/sound/omap-mcpdm.txt index 6f6c2f8e908d..0741dff048dd 100644 --- a/Documentation/devicetree/bindings/sound/omap-mcpdm.txt +++ b/Documentation/devicetree/bindings/sound/omap-mcpdm.txt @@ -8,8 +8,6 @@ Required properties: - interrupts: Interrupt number for McPDM - interrupt-parent: The parent interrupt controller - ti,hwmods: Name of the hwmod associated to the McPDM -- clocks: phandle for the pdmclk provider, likely <&twl6040> -- clock-names: Must be "pdmclk" Example: @@ -21,11 +19,3 @@ mcpdm: mcpdm@40132000 { interrupt-parent = <&gic>; ti,hwmods = "mcpdm"; }; - -In board DTS file the pdmclk needs to be added: - -&mcpdm { - clocks = <&twl6040>; - clock-names = "pdmclk"; - status = "okay"; -}; diff --git a/Documentation/devicetree/bindings/thermal/thermal.txt b/Documentation/devicetree/bindings/thermal/thermal.txt index 41b817f7b670..88b6ea1ad290 100644 --- a/Documentation/devicetree/bindings/thermal/thermal.txt +++ b/Documentation/devicetree/bindings/thermal/thermal.txt @@ -62,7 +62,7 @@ For more examples of cooling devices, refer to the example sections below. Required properties: - #cooling-cells: Used to provide cooling device specific information Type: unsigned while referring to it. Must be at least 2, in order - Size: one cell to specify minimum and maximum cooling state used + Size: one cell to specify minimum and maximum cooling state used in the reference. The first cell is the minimum cooling state requested and the second cell is the maximum cooling state requested in the reference. @@ -119,7 +119,7 @@ Required properties: Optional property: - contribution: The cooling contribution to the thermal zone of the Type: unsigned referred cooling device at the referred trip point. - Size: one cell The contribution is a ratio of the sum + Size: one cell The contribution is a ratio of the sum of all cooling contributions within a thermal zone. Note: Using the THERMAL_NO_LIMIT (-1UL) constant in the cooling-device phandle @@ -145,7 +145,7 @@ Required properties: Size: one cell - thermal-sensors: A list of thermal sensor phandles and sensor specifier - Type: list of used while monitoring the thermal zone. + Type: list of used while monitoring the thermal zone. phandles + sensor specifier @@ -473,7 +473,7 @@ thermal-zones { <&adc>; /* pcb north */ /* hotspot = 100 * bandgap - 120 * adc + 484 */ - coefficients = <100 -120 484>; + coefficients = <100 -120 484>; trips { ... @@ -502,7 +502,7 @@ from the ADC sensor. The binding would be then: thermal-sensors = <&adc>; /* hotspot = 1 * adc + 6000 */ - coefficients = <1 6000>; + coefficients = <1 6000>; (d) - Board thermal diff --git a/Documentation/filesystems/overlayfs.txt b/Documentation/filesystems/overlayfs.txt index d6259c786316..bcbf9710e4af 100644 --- a/Documentation/filesystems/overlayfs.txt +++ b/Documentation/filesystems/overlayfs.txt @@ -183,12 +183,10 @@ The copy_up operation essentially creates a new, identical file and moves it over to the old name. The new file may be on a different filesystem, so both st_dev and st_ino of the file may change. -Any open files referring to this inode will access the old data and -metadata. Similarly any file locks obtained before copy_up will not -apply to the copied up file. +Any open files referring to this inode will access the old data. -On a file opened with O_RDONLY fchmod(2), fchown(2), futimesat(2) and -fsetxattr(2) will fail with EROFS. +Any file locks (and leases) obtained before copy_up will not apply +to the copied up file. If a file with multiple hard links is copied up, then this will "break" the link. Changes will not be propagated to other names diff --git a/Documentation/hwmon/ftsteutates b/Documentation/hwmon/ftsteutates index 2a1bf69c6a26..8c10a916de20 100644 --- a/Documentation/hwmon/ftsteutates +++ b/Documentation/hwmon/ftsteutates @@ -19,5 +19,5 @@ enhancements. It can monitor up to 4 voltages, 16 temperatures and implemented in this driver. Specification of the chip can be found here: -ftp:///pub/Mainboard-OEM-Sales/Services/Software&Tools/Linux_SystemMonitoring&Watchdog&GPIO/BMC-Teutates_Specification_V1.21.pdf -ftp:///pub/Mainboard-OEM-Sales/Services/Software&Tools/Linux_SystemMonitoring&Watchdog&GPIO/Fujitsu_mainboards-1-Sensors_HowTo-en-US.pdf +ftp://ftp.ts.fujitsu.com/pub/Mainboard-OEM-Sales/Services/Software&Tools/Linux_SystemMonitoring&Watchdog&GPIO/BMC-Teutates_Specification_V1.21.pdf +ftp://ftp.ts.fujitsu.com/pub/Mainboard-OEM-Sales/Services/Software&Tools/Linux_SystemMonitoring&Watchdog&GPIO/Fujitsu_mainboards-1-Sensors_HowTo-en-US.pdf diff --git a/Documentation/kernel-documentation.rst b/Documentation/kernel-documentation.rst index c4eb5049da39..391decc66a18 100644 --- a/Documentation/kernel-documentation.rst +++ b/Documentation/kernel-documentation.rst @@ -366,8 +366,6 @@ Domain`_ references. Cross-referencing from reStructuredText ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -.. highlight:: none - To cross-reference the functions and types defined in the kernel-doc comments from reStructuredText documents, please use the `Sphinx C Domain`_ references. For example:: @@ -390,8 +388,6 @@ For further details, please refer to the `Sphinx C Domain`_ documentation. Function documentation ---------------------- -.. highlight:: c - The general format of a function and function-like macro kernel-doc comment is:: /** @@ -572,8 +568,6 @@ DocBook XML [DEPRECATED] Converting DocBook to Sphinx ---------------------------- -.. highlight:: none - Over time, we expect all of the documents under ``Documentation/DocBook`` to be converted to Sphinx and reStructuredText. For most DocBook XML documents, a good enough solution is to use the simple ``Documentation/sphinx/tmplcvt`` script, diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 46c030a49186..a4f4d693e2c1 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -3032,6 +3032,10 @@ bytes respectively. Such letter suffixes can also be entirely omitted. PAGE_SIZE is used as alignment. PCI-PCI bridge can be specified, if resource windows need to be expanded. + To specify the alignment for several + instances of a device, the PCI vendor, + device, subvendor, and subdevice may be + specified, e.g., 4096@pci:8086:9c22:103c:198f ecrc= Enable/disable PCIe ECRC (transaction layer end-to-end CRC checking). bios: Use BIOS/firmware settings. This is the diff --git a/Documentation/networking/dsa/dsa.txt b/Documentation/networking/dsa/dsa.txt index 9d05ed7f7da5..f20c884c048a 100644 --- a/Documentation/networking/dsa/dsa.txt +++ b/Documentation/networking/dsa/dsa.txt @@ -587,26 +587,6 @@ of DSA, would be the its port-based VLAN, used by the associated bridge device. TODO ==== -The platform device problem ---------------------------- -DSA is currently implemented as a platform device driver which is far from ideal -as was discussed in this thread: - -http://permalink.gmane.org/gmane.linux.network/329848 - -This basically prevents the device driver model to be properly used and applied, -and support non-MDIO, non-MMIO Ethernet connected switches. - -Another problem with the platform device driver approach is that it prevents the -use of a modular switch drivers build due to a circular dependency, illustrated -here: - -http://comments.gmane.org/gmane.linux.network/345803 - -Attempts of reworking this has been done here: - -https://lwn.net/Articles/643149/ - Making SWITCHDEV and DSA converge towards an unified codebase ------------------------------------------------------------- diff --git a/Documentation/networking/rxrpc.txt b/Documentation/networking/rxrpc.txt index 16a924c486bf..70c926ae212d 100644 --- a/Documentation/networking/rxrpc.txt +++ b/Documentation/networking/rxrpc.txt @@ -790,13 +790,12 @@ The kernel interface functions are as follows: Data messages can have their contents extracted with the usual bunch of socket buffer manipulation functions. A data message can be determined to be the last one in a sequence with rxrpc_kernel_is_data_last(). When a - data message has been used up, rxrpc_kernel_data_delivered() should be - called on it.. + data message has been used up, rxrpc_kernel_data_consumed() should be + called on it. - Non-data messages should be handled to rxrpc_kernel_free_skb() to dispose - of. It is possible to get extra refs on all types of message for later - freeing, but this may pin the state of a call until the message is finally - freed. + Messages should be handled to rxrpc_kernel_free_skb() to dispose of. It + is possible to get extra refs on all types of message for later freeing, + but this may pin the state of a call until the message is finally freed. (*) Accept an incoming call. @@ -821,12 +820,14 @@ The kernel interface functions are as follows: Other errors may be returned if the call had been aborted (-ECONNABORTED) or had timed out (-ETIME). - (*) Record the delivery of a data message and free it. + (*) Record the delivery of a data message. - void rxrpc_kernel_data_delivered(struct sk_buff *skb); + void rxrpc_kernel_data_consumed(struct rxrpc_call *call, + struct sk_buff *skb); - This is used to record a data message as having been delivered and to - update the ACK state for the call. The socket buffer will be freed. + This is used to record a data message as having been consumed and to + update the ACK state for the call. The message must still be passed to + rxrpc_kernel_free_skb() for disposal by the caller. (*) Free a message. diff --git a/Documentation/power/basic-pm-debugging.txt b/Documentation/power/basic-pm-debugging.txt index b96098ccfe69..708f87f78a75 100644 --- a/Documentation/power/basic-pm-debugging.txt +++ b/Documentation/power/basic-pm-debugging.txt @@ -164,7 +164,32 @@ load n/2 modules more and try again. Again, if you find the offending module(s), it(they) must be unloaded every time before hibernation, and please report the problem with it(them). -c) Advanced debugging +c) Using the "test_resume" hibernation option + +/sys/power/disk generally tells the kernel what to do after creating a +hibernation image. One of the available options is "test_resume" which +causes the just created image to be used for immediate restoration. Namely, +after doing: + +# echo test_resume > /sys/power/disk +# echo disk > /sys/power/state + +a hibernation image will be created and a resume from it will be triggered +immediately without involving the platform firmware in any way. + +That test can be used to check if failures to resume from hibernation are +related to bad interactions with the platform firmware. That is, if the above +works every time, but resume from actual hibernation does not work or is +unreliable, the platform firmware may be responsible for the failures. + +On architectures and platforms that support using different kernels to restore +hibernation images (that is, the kernel used to read the image from storage and +load it into memory is different from the one included in the image) or support +kernel address space randomization, it also can be used to check if failures +to resume may be related to the differences between the restore and image +kernels. + +d) Advanced debugging In case that hibernation does not work on your system even in the minimal configuration and compiling more drivers as modules is not practical or some diff --git a/Documentation/power/interface.txt b/Documentation/power/interface.txt index f1f0f59a7c47..974916ff6608 100644 --- a/Documentation/power/interface.txt +++ b/Documentation/power/interface.txt @@ -1,75 +1,76 @@ -Power Management Interface - - -The power management subsystem provides a unified sysfs interface to -userspace, regardless of what architecture or platform one is -running. The interface exists in /sys/power/ directory (assuming sysfs -is mounted at /sys). - -/sys/power/state controls system power state. Reading from this file -returns what states are supported, which is hard-coded to 'freeze', -'standby' (Power-On Suspend), 'mem' (Suspend-to-RAM), and 'disk' -(Suspend-to-Disk). - -Writing to this file one of those strings causes the system to -transition into that state. Please see the file -Documentation/power/states.txt for a description of each of those -states. - - -/sys/power/disk controls the operating mode of the suspend-to-disk -mechanism. Suspend-to-disk can be handled in several ways. We have a -few options for putting the system to sleep - using the platform driver -(e.g. ACPI or other suspend_ops), powering off the system or rebooting the -system (for testing). - -Additionally, /sys/power/disk can be used to turn on one of the two testing -modes of the suspend-to-disk mechanism: 'testproc' or 'test'. If the -suspend-to-disk mechanism is in the 'testproc' mode, writing 'disk' to -/sys/power/state will cause the kernel to disable nonboot CPUs and freeze -tasks, wait for 5 seconds, unfreeze tasks and enable nonboot CPUs. If it is -in the 'test' mode, writing 'disk' to /sys/power/state will cause the kernel -to disable nonboot CPUs and freeze tasks, shrink memory, suspend devices, wait -for 5 seconds, resume devices, unfreeze tasks and enable nonboot CPUs. Then, -we are able to look in the log messages and work out, for example, which code -is being slow and which device drivers are misbehaving. - -Reading from this file will display all supported modes and the currently -selected one in brackets, for example - - [shutdown] reboot test testproc - -Writing to this file will accept one of - - 'platform' (only if the platform supports it) - 'shutdown' - 'reboot' - 'testproc' - 'test' - -/sys/power/image_size controls the size of the image created by -the suspend-to-disk mechanism. It can be written a string -representing a non-negative integer that will be used as an upper -limit of the image size, in bytes. The suspend-to-disk mechanism will -do its best to ensure the image size will not exceed that number. However, -if this turns out to be impossible, it will try to suspend anyway using the -smallest image possible. In particular, if "0" is written to this file, the -suspend image will be as small as possible. - -Reading from this file will display the current image size limit, which -is set to 2/5 of available RAM by default. - -/sys/power/pm_trace controls the code which saves the last PM event point in -the RTC across reboots, so that you can debug a machine that just hangs -during suspend (or more commonly, during resume). Namely, the RTC is only -used to save the last PM event point if this file contains '1'. Initially it -contains '0' which may be changed to '1' by writing a string representing a -nonzero integer into it. - -To use this debugging feature you should attempt to suspend the machine, then -reboot it and run - - dmesg -s 1000000 | grep 'hash matches' - -CAUTION: Using it will cause your machine's real-time (CMOS) clock to be -set to a random invalid time after a resume. +Power Management Interface for System Sleep + +Copyright (c) 2016 Intel Corp., Rafael J. Wysocki <rafael.j.wysocki@intel.com> + +The power management subsystem provides userspace with a unified sysfs interface +for system sleep regardless of the underlying system architecture or platform. +The interface is located in the /sys/power/ directory (assuming that sysfs is +mounted at /sys). + +/sys/power/state is the system sleep state control file. + +Reading from it returns a list of supported sleep states, encoded as: + +'freeze' (Suspend-to-Idle) +'standby' (Power-On Suspend) +'mem' (Suspend-to-RAM) +'disk' (Suspend-to-Disk) + +Suspend-to-Idle is always supported. Suspend-to-Disk is always supported +too as long the kernel has been configured to support hibernation at all +(ie. CONFIG_HIBERNATION is set in the kernel configuration file). Support +for Suspend-to-RAM and Power-On Suspend depends on the capabilities of the +platform. + +If one of the strings listed in /sys/power/state is written to it, the system +will attempt to transition into the corresponding sleep state. Refer to +Documentation/power/states.txt for a description of each of those states. + +/sys/power/disk controls the operating mode of hibernation (Suspend-to-Disk). +Specifically, it tells the kernel what to do after creating a hibernation image. + +Reading from it returns a list of supported options encoded as: + +'platform' (put the system into sleep using a platform-provided method) +'shutdown' (shut the system down) +'reboot' (reboot the system) +'suspend' (trigger a Suspend-to-RAM transition) +'test_resume' (resume-after-hibernation test mode) + +The currently selected option is printed in square brackets. + +The 'platform' option is only available if the platform provides a special +mechanism to put the system to sleep after creating a hibernation image (ACPI +does that, for example). The 'suspend' option is available if Suspend-to-RAM +is supported. Refer to Documentation/power/basic_pm_debugging.txt for the +description of the 'test_resume' option. + +To select an option, write the string representing it to /sys/power/disk. + +/sys/power/image_size controls the size of hibernation images. + +It can be written a string representing a non-negative integer that will be +used as a best-effort upper limit of the image size, in bytes. The hibernation +core will do its best to ensure that the image size will not exceed that number. +However, if that turns out to be impossible to achieve, a hibernation image will +still be created and its size will be as small as possible. In particular, +writing '0' to this file will enforce hibernation images to be as small as +possible. + +Reading from this file returns the current image size limit, which is set to +around 2/5 of available RAM by default. + +/sys/power/pm_trace controls the PM trace mechanism saving the last suspend +or resume event point in the RTC across reboots. + +It helps to debug hard lockups or reboots due to device driver failures that +occur during system suspend or resume (which is more common) more effectively. + +If /sys/power/pm_trace contains '1', the fingerprint of each suspend/resume +event point in turn will be stored in the RTC memory (overwriting the actual +RTC information), so it will survive a system crash if one occurs right after +storing it and it can be used later to identify the driver that caused the crash +to happen (see Documentation/power/s2ram.txt for more information). + +Initially it contains '0' which may be changed to '1' by writing a string +representing a nonzero integer into it. diff --git a/Documentation/powerpc/transactional_memory.txt b/Documentation/powerpc/transactional_memory.txt index ba0a2a4a54ba..e32fdbb4c9a7 100644 --- a/Documentation/powerpc/transactional_memory.txt +++ b/Documentation/powerpc/transactional_memory.txt @@ -167,6 +167,8 @@ signal will be rolled back anyway. For signals taken in non-TM or suspended mode, we use the normal/non-checkpointed stack pointer. +Any transaction initiated inside a sighandler and suspended on return +from the sighandler to the kernel will get reclaimed and discarded. Failure cause codes used by kernel ================================== diff --git a/Documentation/rapidio/mport_cdev.txt b/Documentation/rapidio/mport_cdev.txt index 6e491a662461..a53f786ee2e9 100644 --- a/Documentation/rapidio/mport_cdev.txt +++ b/Documentation/rapidio/mport_cdev.txt @@ -80,6 +80,10 @@ functionality of their platform when planning to use this driver: III. Module parameters +- 'dma_timeout' - DMA transfer completion timeout (in msec, default value 3000). + This parameter set a maximum completion wait time for SYNC mode DMA + transfer requests and for RIO_WAIT_FOR_ASYNC ioctl requests. + - 'dbg_level' - This parameter allows to control amount of debug information generated by this device driver. This parameter is formed by set of bit masks that correspond to the specific functional blocks. diff --git a/Documentation/sphinx-static/theme_overrides.css b/Documentation/sphinx-static/theme_overrides.css index 3a2ac4bcfd78..e88461c4c1e6 100644 --- a/Documentation/sphinx-static/theme_overrides.css +++ b/Documentation/sphinx-static/theme_overrides.css @@ -42,11 +42,12 @@ caption a.headerlink { opacity: 0; } caption a.headerlink:hover { opacity: 1; } - /* inline literal: drop the borderbox and red color */ + /* inline literal: drop the borderbox, padding and red color */ code, .rst-content tt, .rst-content code { color: inherit; border: none; + padding: unset; background: inherit; font-size: 85%; } |