diff options
Diffstat (limited to 'Documentation')
-rw-r--r-- | Documentation/devicetree/bindings/input/touchscreen/zinitix,bt400.yaml | 115 | ||||
-rw-r--r-- | Documentation/devicetree/bindings/input/touchscreen/zinitix.txt | 40 |
2 files changed, 115 insertions, 40 deletions
diff --git a/Documentation/devicetree/bindings/input/touchscreen/zinitix,bt400.yaml b/Documentation/devicetree/bindings/input/touchscreen/zinitix,bt400.yaml new file mode 100644 index 000000000000..b4e5ba7c0b49 --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/zinitix,bt400.yaml @@ -0,0 +1,115 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/touchscreen/zinitix,bt400.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Zinitix BT4xx and BT5xx series touchscreen controller bindings + +description: The Zinitix BT4xx and BT5xx series of touchscreen controllers + are Korea-produced touchscreens with embedded microcontrollers. The + BT4xx series was produced 2010-2013 and the BT5xx series 2013-2014. + +maintainers: + - Michael Srba <Michael.Srba@seznam.cz> + - Linus Walleij <linus.walleij@linaro.org> + +allOf: + - $ref: touchscreen.yaml# + +properties: + $nodename: + pattern: "^touchscreen(@.*)?$" + + compatible: + enum: + - zinitix,bt402 + - zinitix,bt403 + - zinitix,bt404 + - zinitix,bt412 + - zinitix,bt413 + - zinitix,bt431 + - zinitix,bt432 + - zinitix,bt531 + - zinitix,bt532 + - zinitix,bt538 + - zinitix,bt541 + - zinitix,bt548 + - zinitix,bt554 + - zinitix,at100 + + reg: + description: I2C address on the I2C bus + + clock-frequency: + description: I2C client clock frequency, defined for host when using + the device on the I2C bus + minimum: 0 + maximum: 400000 + + interrupts: + description: Interrupt to host + maxItems: 1 + + vcca-supply: + description: Analog power supply regulator on the VCCA pin + + vdd-supply: + description: Digital power supply regulator on the VDD pin. + In older device trees this can be the accidental name for the analog + supply on the VCCA pin, and in that case the deprecated vddo-supply is + used for the digital power supply. + + vddo-supply: + description: Deprecated name for the digital power supply, use vdd-supply + as this reflects the real name of the pin. If this supply is present, + the vdd-supply represents VCCA instead of VDD. Implementers should first + check for this property, and if it is present assume that the vdd-supply + represents the analog supply. + deprecated: true + + reset-gpios: + description: Reset line for the touchscreen, should be tagged + as GPIO_ACTIVE_LOW + + zinitix,mode: + description: Mode of reporting touch points. Some modes may not work + with a particular ts firmware for unknown reasons. Available modes are + 1 and 2. Mode 2 is the default and preferred. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1, 2] + + touchscreen-size-x: true + touchscreen-size-y: true + touchscreen-fuzz-x: true + touchscreen-fuzz-y: true + +additionalProperties: false + +required: + - compatible + - reg + - interrupts + - touchscreen-size-x + - touchscreen-size-y + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/gpio/gpio.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + touchscreen@20 { + compatible = "zinitix,bt541"; + reg = <0x20>; + interrupt-parent = <&gpio>; + interrupts = <13 IRQ_TYPE_EDGE_FALLING>; + vcca-supply = <®_vcca_tsp>; + vdd-supply = <®_vdd_tsp>; + touchscreen-size-x = <540>; + touchscreen-size-y = <960>; + zinitix,mode = <2>; + }; + }; diff --git a/Documentation/devicetree/bindings/input/touchscreen/zinitix.txt b/Documentation/devicetree/bindings/input/touchscreen/zinitix.txt deleted file mode 100644 index 446efb9f5f55..000000000000 --- a/Documentation/devicetree/bindings/input/touchscreen/zinitix.txt +++ /dev/null @@ -1,40 +0,0 @@ -Device tree bindings for Zinitx BT541 touchscreen controller - -Required properties: - - - compatible : Should be "zinitix,bt541" - - reg : I2C address of the chip. Should be 0x20 - - interrupts : Interrupt to which the chip is connected - -Optional properties: - - - vdd-supply : Analog power supply regulator on VCCA pin - - vddo-supply : Digital power supply regulator on VDD pin - - zinitix,mode : Mode of reporting touch points. Some modes may not work - with a particular ts firmware for unknown reasons. Available - modes are 1 and 2. Mode 2 is the default and preferred. - -The touchscreen-* properties are documented in touchscreen.txt in this -directory. - -Example: - - i2c@00000000 { - /* ... */ - - bt541@20 { - compatible = "zinitix,bt541"; - reg = <0x20>; - interrupt-parent = <&msmgpio>; - interrupts = <13 IRQ_TYPE_EDGE_FALLING>; - pinctrl-names = "default"; - pinctrl-0 = <&tsp_default>; - vdd-supply = <®_vdd_tsp>; - vddo-supply = <&pm8916_l6>; - touchscreen-size-x = <540>; - touchscreen-size-y = <960>; - zinitix,mode = <2>; - }; - - /* ... */ - }; |