diff options
Diffstat (limited to 'arch/arm/boot/dts')
369 files changed, 9387 insertions, 5400 deletions
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 6aa7dc4db2fc..d08a3c450ce7 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -129,6 +129,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \ bcm4709-tplink-archer-c9-v1.dtb \ bcm47094-asus-rt-ac88u.dtb \ bcm47094-dlink-dir-885l.dtb \ + bcm47094-dlink-dir-890l.dtb \ bcm47094-linksys-panamera.dtb \ bcm47094-luxul-abr-4500.dtb \ bcm47094-luxul-xap-1610.dtb \ @@ -139,6 +140,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \ bcm47094-netgear-r8500.dtb \ bcm47094-phicomm-k3.dtb \ bcm53015-meraki-mr26.dtb \ + bcm53016-dlink-dwl-8610ap.dtb \ bcm53016-meraki-mr32.dtb \ bcm94708.dtb \ bcm94709.dtb \ @@ -355,6 +357,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \ kirkwood-ns2mini.dtb \ kirkwood-nsa310.dtb \ kirkwood-nsa310a.dtb \ + kirkwood-nsa310s.dtb \ kirkwood-nsa320.dtb \ kirkwood-nsa325.dtb \ kirkwood-openblocks_a6.dtb \ @@ -681,6 +684,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6s-dhcom-drc02.dtb dtb-$(CONFIG_SOC_IMX6SL) += \ imx6sl-evk.dtb \ + imx6sl-kobo-aura2.dtb \ imx6sl-tolino-shine2hd.dtb \ imx6sl-tolino-shine3.dtb \ imx6sl-tolino-vision5.dtb \ @@ -1029,7 +1033,9 @@ dtb-$(CONFIG_ARCH_OXNAS) += \ dtb-$(CONFIG_ARCH_QCOM) += \ qcom-apq8016-sbc.dtb \ qcom-apq8026-asus-sparrow.dtb \ + qcom-apq8026-huawei-sturgeon.dtb \ qcom-apq8026-lg-lenok.dtb \ + qcom-apq8026-samsung-matisse-wifi.dtb \ qcom-apq8060-dragonboard.dtb \ qcom-apq8064-cm-qs600.dtb \ qcom-apq8064-ifc6410.dtb \ @@ -1059,6 +1065,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \ qcom-msm8974-sony-xperia-rhine-amami.dtb \ qcom-msm8974-sony-xperia-rhine-honami.dtb \ qcom-msm8974pro-fairphone-fp2.dtb \ + qcom-msm8974pro-oneplus-bacon.dtb \ qcom-msm8974pro-samsung-klte.dtb \ qcom-msm8974pro-sony-xperia-shinano-castor.dtb \ qcom-mdm9615-wp8548-mangoh-green.dtb \ @@ -1214,6 +1221,7 @@ dtb-$(CONFIG_ARCH_STM32) += \ stm32mp151a-prtt1a.dtb \ stm32mp151a-prtt1c.dtb \ stm32mp151a-prtt1s.dtb \ + stm32mp151a-dhcor-testbench.dtb \ stm32mp153c-dhcom-drc02.dtb \ stm32mp153c-dhcor-drc-compact.dtb \ stm32mp157a-avenger96.dtb \ @@ -1454,6 +1462,8 @@ dtb-$(CONFIG_ARCH_UNIPHIER) += \ uniphier-pro4-ace.dtb \ uniphier-pro4-ref.dtb \ uniphier-pro4-sanji.dtb \ + uniphier-pro5-epcore.dtb \ + uniphier-pro5-proex.dtb \ uniphier-pxs2-gentil.dtb \ uniphier-pxs2-vodka.dtb \ uniphier-sld8-ref.dtb @@ -1588,6 +1598,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \ aspeed-bmc-asrock-e3c246d4i.dtb \ aspeed-bmc-asrock-romed8hm3.dtb \ aspeed-bmc-bytedance-g220a.dtb \ + aspeed-bmc-delta-ahe50dc.dtb \ aspeed-bmc-facebook-bletchley.dtb \ aspeed-bmc-facebook-cloudripper.dtb \ aspeed-bmc-facebook-cmm.dtb \ @@ -1601,6 +1612,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \ aspeed-bmc-facebook-wedge400.dtb \ aspeed-bmc-facebook-yamp.dtb \ aspeed-bmc-facebook-yosemitev2.dtb \ + aspeed-bmc-ibm-bonnell.dtb \ aspeed-bmc-ibm-everest.dtb \ aspeed-bmc-ibm-rainier.dtb \ aspeed-bmc-ibm-rainier-1s4u.dtb \ @@ -1612,7 +1624,6 @@ dtb-$(CONFIG_ARCH_ASPEED) += \ aspeed-bmc-lenovo-hr855xg2.dtb \ aspeed-bmc-microsoft-olympus.dtb \ aspeed-bmc-opp-lanyang.dtb \ - aspeed-bmc-opp-mihawk.dtb \ aspeed-bmc-opp-mowgli.dtb \ aspeed-bmc-opp-nicole.dtb \ aspeed-bmc-opp-palmetto.dtb \ diff --git a/arch/arm/boot/dts/am335x-baltos-leds.dtsi b/arch/arm/boot/dts/am335x-baltos-leds.dtsi index 9a79f727baf6..025014657d12 100644 --- a/arch/arm/boot/dts/am335x-baltos-leds.dtsi +++ b/arch/arm/boot/dts/am335x-baltos-leds.dtsi @@ -17,18 +17,18 @@ compatible = "gpio-leds"; - power { + led-power { label = "onrisc:red:power"; linux,default-trigger = "default-on"; gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; default-state = "on"; }; - wlan { + led-wlan { label = "onrisc:blue:wlan"; gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>; default-state = "off"; }; - app { + led-app { label = "onrisc:green:app"; gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>; default-state = "off"; diff --git a/arch/arm/boot/dts/am335x-boneblack-hdmi.dtsi b/arch/arm/boot/dts/am335x-boneblack-hdmi.dtsi index 7cfddada9348..486f24deb875 100644 --- a/arch/arm/boot/dts/am335x-boneblack-hdmi.dtsi +++ b/arch/arm/boot/dts/am335x-boneblack-hdmi.dtsi @@ -85,8 +85,13 @@ audio-ports = < TDA998x_I2S 0x03>; ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { - hdmi_0: endpoint@0 { + reg = <0>; + + hdmi_0: endpoint { remote-endpoint = <&lcdc_0>; }; }; diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts index 25c6ac9913d2..5beabaa5ff6a 100644 --- a/arch/arm/boot/dts/am335x-evm.dts +++ b/arch/arm/boot/dts/am335x-evm.dts @@ -126,7 +126,7 @@ backlight = <&backlight>; port { - panel_0: endpoint@0 { + panel_0: endpoint { remote-endpoint = <&lcdc_0>; }; }; @@ -544,7 +544,7 @@ #size-cells = <1>; partition@0 { label = "NAND.SPL"; - reg = <0x00000000 0x000020000>; + reg = <0x00000000 0x00020000>; }; partition@1 { label = "NAND.SPL.backup1"; diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts index 9c458e5a95b7..5b3278c0c46a 100644 --- a/arch/arm/boot/dts/am335x-evmsk.dts +++ b/arch/arm/boot/dts/am335x-evmsk.dts @@ -191,7 +191,7 @@ backlight = <&lcd_bl>; port { - panel_0: endpoint@0 { + panel_0: endpoint { remote-endpoint = <&lcdc_0>; }; }; diff --git a/arch/arm/boot/dts/am335x-guardian.dts b/arch/arm/boot/dts/am335x-guardian.dts index f6356266564c..b357364e93f9 100644 --- a/arch/arm/boot/dts/am335x-guardian.dts +++ b/arch/arm/boot/dts/am335x-guardian.dts @@ -103,8 +103,9 @@ }; - guardian_beeper: dmtimer-pwm@7 { + guardian_beeper: pwm-7 { compatible = "ti,omap-dmtimer-pwm"; + #pwm-cells = <3>; ti,timers = <&timer7>; pinctrl-names = "default"; pinctrl-0 = <&guardian_beeper_pins>; diff --git a/arch/arm/boot/dts/am335x-igep0033.dtsi b/arch/arm/boot/dts/am335x-igep0033.dtsi index cc14415a4eb9..3fddf80dcf71 100644 --- a/arch/arm/boot/dts/am335x-igep0033.dtsi +++ b/arch/arm/boot/dts/am335x-igep0033.dtsi @@ -168,7 +168,7 @@ /* MTD partition table */ partition@0 { label = "SPL"; - reg = <0x00000000 0x000080000>; + reg = <0x00000000 0x00080000>; }; partition@1 { @@ -188,7 +188,7 @@ partition@4 { label = "File System"; - reg = <0x00780000 0x007880000>; + reg = <0x00780000 0x07880000>; }; }; }; diff --git a/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi b/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi index 7b40ca9483ca..49e280b42442 100644 --- a/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi +++ b/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi @@ -16,11 +16,11 @@ /* Power supply provides a fixed 3.3V @3A */ vmmcsd_fixed: vmmcsd-regulator { - compatible = "regulator-fixed"; - regulator-name = "vmmcsd_fixed"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; + compatible = "regulator-fixed"; + regulator-name = "vmmcsd_fixed"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; }; buttons: push_button { diff --git a/arch/arm/boot/dts/am335x-moxa-uc-8100-common.dtsi b/arch/arm/boot/dts/am335x-moxa-uc-8100-common.dtsi index e0364adb8393..7d00e8b20f18 100644 --- a/arch/arm/boot/dts/am335x-moxa-uc-8100-common.dtsi +++ b/arch/arm/boot/dts/am335x-moxa-uc-8100-common.dtsi @@ -21,11 +21,11 @@ /* Power supply provides a fixed 3.3V @3A */ vmmcsd_fixed: vmmcsd-regulator { - compatible = "regulator-fixed"; - regulator-name = "vmmcsd_fixed"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; + compatible = "regulator-fixed"; + regulator-name = "vmmcsd_fixed"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; }; buttons: push_button { diff --git a/arch/arm/boot/dts/am335x-myirtech-myd.dts b/arch/arm/boot/dts/am335x-myirtech-myd.dts index 9d81d4cc6890..425ad9b81a68 100644 --- a/arch/arm/boot/dts/am335x-myirtech-myd.dts +++ b/arch/arm/boot/dts/am335x-myirtech-myd.dts @@ -161,8 +161,13 @@ #sound-dai-cells = <0>; ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { - hdmi_0: endpoint@0 { + reg = <0>; + + hdmi_0: endpoint { remote-endpoint = <&lcdc_0>; }; }; diff --git a/arch/arm/boot/dts/am335x-pcm-953.dtsi b/arch/arm/boot/dts/am335x-pcm-953.dtsi index dae448040a97..947497413977 100644 --- a/arch/arm/boot/dts/am335x-pcm-953.dtsi +++ b/arch/arm/boot/dts/am335x-pcm-953.dtsi @@ -12,22 +12,20 @@ compatible = "phytec,am335x-pcm-953", "phytec,am335x-phycore-som", "ti,am33xx"; /* Power */ - regulators { - vcc3v3: fixedregulator@1 { - compatible = "regulator-fixed"; - regulator-name = "vcc3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - }; + vcc3v3: fixedregulator1 { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; - vcc1v8: fixedregulator@2 { - compatible = "regulator-fixed"; - regulator-name = "vcc1v8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-boot-on; - }; + vcc1v8: fixedregulator2 { + compatible = "regulator-fixed"; + regulator-name = "vcc1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; }; /* User IO */ diff --git a/arch/arm/boot/dts/am335x-pepper.dts b/arch/arm/boot/dts/am335x-pepper.dts index 8691eec33b61..a4509e9e1056 100644 --- a/arch/arm/boot/dts/am335x-pepper.dts +++ b/arch/arm/boot/dts/am335x-pepper.dts @@ -555,11 +555,11 @@ }; &usb0 { - dr_mode = "host"; + dr_mode = "host"; }; &usb1 { - dr_mode = "host"; + dr_mode = "host"; }; &am33xx_pinmux { diff --git a/arch/arm/boot/dts/am335x-pocketbeagle.dts b/arch/arm/boot/dts/am335x-pocketbeagle.dts index 5e415d8ffdd8..0ba4883cd4ef 100644 --- a/arch/arm/boot/dts/am335x-pocketbeagle.dts +++ b/arch/arm/boot/dts/am335x-pocketbeagle.dts @@ -23,28 +23,28 @@ compatible = "gpio-leds"; - usr0 { + led-usr0 { label = "beaglebone:green:usr0"; gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; default-state = "off"; }; - usr1 { + led-usr1 { label = "beaglebone:green:usr1"; gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>; linux,default-trigger = "mmc0"; default-state = "off"; }; - usr2 { + led-usr2 { label = "beaglebone:green:usr2"; gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>; linux,default-trigger = "cpu0"; default-state = "off"; }; - usr3 { + led-usr3 { label = "beaglebone:green:usr3"; gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>; default-state = "off"; diff --git a/arch/arm/boot/dts/am3517-evm.dts b/arch/arm/boot/dts/am3517-evm.dts index 35b653014f2b..11618aa501fc 100644 --- a/arch/arm/boot/dts/am3517-evm.dts +++ b/arch/arm/boot/dts/am3517-evm.dts @@ -26,12 +26,12 @@ reg = <0x80000000 0x10000000>; /* 256 MB */ }; - vmmc_fixed: vmmc { - compatible = "regulator-fixed"; - regulator-name = "vmmc_fixed"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; + vmmc_fixed: vmmc { + compatible = "regulator-fixed"; + regulator-name = "vmmc_fixed"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; gpio-keys { compatible = "gpio-keys-polled"; @@ -150,7 +150,7 @@ enable-gpios = <&gpio6 22 GPIO_ACTIVE_HIGH>; /* gpio_182 */ }; - pwm11: dmtimer-pwm@11 { + pwm11: pwm-11 { compatible = "ti,omap-dmtimer-pwm"; pinctrl-names = "default"; pinctrl-0 = <&pwm_pins>; @@ -176,7 +176,7 @@ }; &davinci_mdio { - status = "okay"; + status = "okay"; }; &dss { @@ -227,7 +227,7 @@ }; &mmc3 { - status = "disabled"; + status = "disabled"; }; &usbhshost { diff --git a/arch/arm/boot/dts/am3517.dtsi b/arch/arm/boot/dts/am3517.dtsi index cb316135bc7c..823f63502e9f 100644 --- a/arch/arm/boot/dts/am3517.dtsi +++ b/arch/arm/boot/dts/am3517.dtsi @@ -49,13 +49,35 @@ }; ocp@68000000 { - am35x_otg_hs: am35x_otg_hs@5c040000 { - compatible = "ti,omap3-musb"; - ti,hwmods = "am35x_otg_hs"; - status = "disabled"; - reg = <0x5c040000 0x1000>; - interrupts = <71>; - interrupt-names = "mc"; + target-module@5c040000 { + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x5c040400 0x4>, + <0x5c040404 0x4>, + <0x5c040408 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,syss-mask = <1>; + clocks = <&hsotgusb_ick_am35xx>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x5c040000 0x1000>; + + am35x_otg_hs: am35x_otg_hs@0 { + compatible = "ti,omap3-musb"; + status = "disabled"; + reg = <0 0x1000>; + interrupts = <71>; + interrupt-names = "mc"; + }; }; davinci_emac: ethernet@5c000000 { @@ -154,7 +176,7 @@ }; /* Table Table 5-79 of the TRM shows 480ab000 is reserved */ -&usb_otg_hs { +&usb_otg_target { status = "disabled"; }; diff --git a/arch/arm/boot/dts/am437x-idk-evm.dts b/arch/arm/boot/dts/am437x-idk-evm.dts index 123a95f87554..e46cf2a9d075 100644 --- a/arch/arm/boot/dts/am437x-idk-evm.dts +++ b/arch/arm/boot/dts/am437x-idk-evm.dts @@ -452,7 +452,7 @@ */ partition@0 { label = "QSPI.U_BOOT"; - reg = <0x00000000 0x000080000>; + reg = <0x00000000 0x00080000>; }; partition@1 { label = "QSPI.U_BOOT.backup"; diff --git a/arch/arm/boot/dts/am437x-sk-evm.dts b/arch/arm/boot/dts/am437x-sk-evm.dts index 036f3831dc26..511a02e13e2c 100644 --- a/arch/arm/boot/dts/am437x-sk-evm.dts +++ b/arch/arm/boot/dts/am437x-sk-evm.dts @@ -763,7 +763,7 @@ */ partition@0 { label = "QSPI.U_BOOT"; - reg = <0x00000000 0x000080000>; + reg = <0x00000000 0x00080000>; }; partition@1 { label = "QSPI.U_BOOT.backup"; diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts index 27f4ce855549..9fc915a2582e 100644 --- a/arch/arm/boot/dts/am43x-epos-evm.dts +++ b/arch/arm/boot/dts/am43x-epos-evm.dts @@ -919,7 +919,7 @@ */ partition@0 { label = "QSPI.U_BOOT"; - reg = <0x00000000 0x000080000>; + reg = <0x00000000 0x00080000>; }; partition@1 { label = "QSPI.U_BOOT.backup"; diff --git a/arch/arm/boot/dts/am57xx-idk-common.dtsi b/arch/arm/boot/dts/am57xx-idk-common.dtsi index c06eda817242..7f092a8811e8 100644 --- a/arch/arm/boot/dts/am57xx-idk-common.dtsi +++ b/arch/arm/boot/dts/am57xx-idk-common.dtsi @@ -542,7 +542,7 @@ */ partition@0 { label = "QSPI.SPL"; - reg = <0x00000000 0x000040000>; + reg = <0x00000000 0x00040000>; }; partition@1 { label = "QSPI.u-boot"; diff --git a/arch/arm/boot/dts/armada-370-dlink-dns327l.dts b/arch/arm/boot/dts/armada-370-dlink-dns327l.dts index 2008c6eaaa52..561195b749eb 100644 --- a/arch/arm/boot/dts/armada-370-dlink-dns327l.dts +++ b/arch/arm/boot/dts/armada-370-dlink-dns327l.dts @@ -86,19 +86,19 @@ pinctrl-names = "default"; - sata-r-amber-pin { + led-sata-r-amber { label = "dns327l:amber:sata-r"; gpios = <&gpio1 20 GPIO_ACTIVE_HIGH>; default-state = "keep"; }; - sata-l-amber-pin { + led-sata-l-amber { label = "dns327l:amber:sata-l"; gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>; default-state = "keep"; }; - backup-led-pin { + led-backup { label = "dns327l:white:usb"; gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>; default-state = "keep"; diff --git a/arch/arm/boot/dts/armada-370-netgear-rn102.dts b/arch/arm/boot/dts/armada-370-netgear-rn102.dts index b0b640b7de40..079b37cf148a 100644 --- a/arch/arm/boot/dts/armada-370-netgear-rn102.dts +++ b/arch/arm/boot/dts/armada-370-netgear-rn102.dts @@ -85,11 +85,11 @@ }; clocks { - g762_clk: g762-oscillator { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <8192>; - }; + g762_clk: g762-oscillator { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <8192>; + }; }; gpio-leds { diff --git a/arch/arm/boot/dts/armada-370-netgear-rn104.dts b/arch/arm/boot/dts/armada-370-netgear-rn104.dts index 85e2e9e27a9f..d752ac1d7b58 100644 --- a/arch/arm/boot/dts/armada-370-netgear-rn104.dts +++ b/arch/arm/boot/dts/armada-370-netgear-rn104.dts @@ -94,11 +94,11 @@ }; clocks { - g762_clk: g762-oscillator { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <8192>; - }; + g762_clk: g762-oscillator { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <8192>; + }; }; gpio-leds { diff --git a/arch/arm/boot/dts/armada-370-rd.dts b/arch/arm/boot/dts/armada-370-rd.dts index 6ba7699b69ed..be005c9f42ef 100644 --- a/arch/arm/boot/dts/armada-370-rd.dts +++ b/arch/arm/boot/dts/armada-370-rd.dts @@ -61,8 +61,8 @@ status = "okay"; phy-mode = "rgmii-id"; fixed-link { - speed = <1000>; - full-duplex; + speed = <1000>; + full-duplex; }; }; @@ -155,18 +155,18 @@ }; port@1 { - reg = <1>; - label = "lan1"; + reg = <1>; + label = "lan1"; }; port@2 { - reg = <2>; - label = "lan2"; + reg = <2>; + label = "lan2"; }; port@3 { - reg = <3>; - label = "lan3"; + reg = <3>; + label = "lan3"; }; port@5 { diff --git a/arch/arm/boot/dts/armada-370-seagate-nas-4bay.dts b/arch/arm/boot/dts/armada-370-seagate-nas-4bay.dts index 3cf70c72c5ca..9cb69999b1db 100644 --- a/arch/arm/boot/dts/armada-370-seagate-nas-4bay.dts +++ b/arch/arm/boot/dts/armada-370-seagate-nas-4bay.dts @@ -72,11 +72,11 @@ }; gpio-leds { - red-sata2 { + led-red-sata2 { label = "dart:red:sata2"; gpios = <&pca9554 0 GPIO_ACTIVE_LOW>; }; - red-sata3 { + led-red-sata3 { label = "dart:red:sata3"; gpios = <&pca9554 3 GPIO_ACTIVE_LOW>; }; diff --git a/arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi b/arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi index 866b8630d407..822f10734946 100644 --- a/arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi +++ b/arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi @@ -132,21 +132,21 @@ gpio-leds { compatible = "gpio-leds"; - white-power { + led-white-power { label = "dart:white:power"; gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>; linux,default-trigger = "timer"; }; - red-power { + led-red-power { label = "dart:red:power"; gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>; }; - red-sata0 { + led-red-sata0 { label = "dart:red:sata0"; gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; }; - red-sata1 { + led-red-sata1 { label = "dart:red:sata1"; gpios = <&gpio1 21 GPIO_ACTIVE_LOW>; }; diff --git a/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi b/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi index 702a85af2078..124a8ba279e3 100644 --- a/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi +++ b/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi @@ -107,7 +107,7 @@ gpio-leds { compatible = "gpio-leds"; - red-sata0 { + led-red-sata0 { label = "cumulus:red:sata0"; gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>; default-state = "off"; diff --git a/arch/arm/boot/dts/armada-370-synology-ds213j.dts b/arch/arm/boot/dts/armada-370-synology-ds213j.dts index e72b8ed4b997..f0893cc06607 100644 --- a/arch/arm/boot/dts/armada-370-synology-ds213j.dts +++ b/arch/arm/boot/dts/armada-370-synology-ds213j.dts @@ -91,9 +91,9 @@ }; ethernet@70000 { - status = "okay"; - phy = <&phy1>; - phy-mode = "sgmii"; + status = "okay"; + phy = <&phy1>; + phy-mode = "sgmii"; }; sata@a0000 { diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi index 9dc928859ad3..2013a5ccecd3 100644 --- a/arch/arm/boot/dts/armada-370.dtsi +++ b/arch/arm/boot/dts/armada-370.dtsi @@ -84,7 +84,7 @@ pcie2: pcie@2,0 { device_type = "pci"; - assigned-addresses = <0x82002800 0 0x80000 0 0x2000>; + assigned-addresses = <0x82001000 0 0x80000 0 0x2000>; reg = <0x1000 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; diff --git a/arch/arm/boot/dts/armada-375.dtsi b/arch/arm/boot/dts/armada-375.dtsi index 929deaf312a5..c310ef26d1cc 100644 --- a/arch/arm/boot/dts/armada-375.dtsi +++ b/arch/arm/boot/dts/armada-375.dtsi @@ -592,7 +592,7 @@ pcie1: pcie@2,0 { device_type = "pci"; - assigned-addresses = <0x82000800 0 0x44000 0 0x2000>; + assigned-addresses = <0x82001000 0 0x44000 0 0x2000>; reg = <0x1000 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; diff --git a/arch/arm/boot/dts/armada-380.dtsi b/arch/arm/boot/dts/armada-380.dtsi index ce1dddb2269b..e94f22b0e9b5 100644 --- a/arch/arm/boot/dts/armada-380.dtsi +++ b/arch/arm/boot/dts/armada-380.dtsi @@ -89,7 +89,7 @@ /* x1 port */ pcie@2,0 { device_type = "pci"; - assigned-addresses = <0x82000800 0 0x40000 0 0x2000>; + assigned-addresses = <0x82001000 0 0x40000 0 0x2000>; reg = <0x1000 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; @@ -118,7 +118,7 @@ /* x1 port */ pcie@3,0 { device_type = "pci"; - assigned-addresses = <0x82000800 0 0x44000 0 0x2000>; + assigned-addresses = <0x82001800 0 0x44000 0 0x2000>; reg = <0x1800 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; diff --git a/arch/arm/boot/dts/armada-385-linksys-caiman.dts b/arch/arm/boot/dts/armada-385-linksys-caiman.dts index a03050c97084..88b2921fed55 100644 --- a/arch/arm/boot/dts/armada-385-linksys-caiman.dts +++ b/arch/arm/boot/dts/armada-385-linksys-caiman.dts @@ -62,11 +62,11 @@ }; &gpio_leds { - power { + led-power { label = "caiman:white:power"; }; - sata { + led-sata { label = "caiman:white:sata"; }; }; diff --git a/arch/arm/boot/dts/armada-385-linksys-cobra.dts b/arch/arm/boot/dts/armada-385-linksys-cobra.dts index e3e4877a6f49..88200f930d0d 100644 --- a/arch/arm/boot/dts/armada-385-linksys-cobra.dts +++ b/arch/arm/boot/dts/armada-385-linksys-cobra.dts @@ -62,11 +62,11 @@ }; &gpio_leds { - power { + led-power { label = "cobra:white:power"; }; - sata { + led-sata { label = "cobra:white:sata"; }; }; diff --git a/arch/arm/boot/dts/armada-385-linksys-rango.dts b/arch/arm/boot/dts/armada-385-linksys-rango.dts index 3c4af57ec2b9..4ab45f294de2 100644 --- a/arch/arm/boot/dts/armada-385-linksys-rango.dts +++ b/arch/arm/boot/dts/armada-385-linksys-rango.dts @@ -54,22 +54,22 @@ }; &gpio_leds { - power { + led-power { gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>; label = "rango:white:power"; }; - sata { + led-sata { gpios = <&gpio0 21 GPIO_ACTIVE_LOW>; label = "rango:white:sata"; }; - wlan_2g { + led-wlan_2g { gpios = <&gpio1 13 GPIO_ACTIVE_LOW>; label = "rango:white:wlan_2g"; }; - wlan_5g { + led-wlan_5g { gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; label = "rango:white:wlan_5g"; }; diff --git a/arch/arm/boot/dts/armada-385-linksys-shelby.dts b/arch/arm/boot/dts/armada-385-linksys-shelby.dts index 3451cd3e5dff..f1b1f22413f1 100644 --- a/arch/arm/boot/dts/armada-385-linksys-shelby.dts +++ b/arch/arm/boot/dts/armada-385-linksys-shelby.dts @@ -62,11 +62,11 @@ }; &gpio_leds { - power { + led-power { label = "shelby:white:power"; }; - sata { + led-sata { label = "shelby:white:sata"; }; }; diff --git a/arch/arm/boot/dts/armada-385-linksys.dtsi b/arch/arm/boot/dts/armada-385-linksys.dtsi index 116aca5e688f..85e8d966f6c1 100644 --- a/arch/arm/boot/dts/armada-385-linksys.dtsi +++ b/arch/arm/boot/dts/armada-385-linksys.dtsi @@ -71,12 +71,12 @@ pinctrl-0 = <&gpio_leds_pins>; pinctrl-names = "default"; - power { + led-power { gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>; default-state = "on"; }; - sata { + led-sata { gpios = <&gpio1 22 GPIO_ACTIVE_LOW>; default-state = "off"; linux,default-trigger = "disk-activity"; diff --git a/arch/arm/boot/dts/armada-385-synology-ds116.dts b/arch/arm/boot/dts/armada-385-synology-ds116.dts index 2622af73c9da..ea91ff964d94 100644 --- a/arch/arm/boot/dts/armada-385-synology-ds116.dts +++ b/arch/arm/boot/dts/armada-385-synology-ds116.dts @@ -149,7 +149,7 @@ * sata0, and accesses to SATA disk 0 make it blink so it * doesn't need to be declared here. */ - orange { + led-orange { gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; label = "ds116:orange:disk"; default-state = "off"; diff --git a/arch/arm/boot/dts/armada-385-turris-omnia.dts b/arch/arm/boot/dts/armada-385-turris-omnia.dts index 72ac807cae25..0c1f238e4c30 100644 --- a/arch/arm/boot/dts/armada-385-turris-omnia.dts +++ b/arch/arm/boot/dts/armada-385-turris-omnia.dts @@ -23,6 +23,12 @@ stdout-path = &uart0; }; + aliases { + ethernet0 = ð0; + ethernet1 = ð1; + ethernet2 = ð2; + }; + memory { device_type = "memory"; reg = <0x00000000 0x40000000>; /* 1024 MB */ @@ -483,7 +489,17 @@ }; }; - /* port 6 is connected to eth0 */ + ports@6 { + reg = <6>; + label = "cpu"; + ethernet = <ð0>; + phy-mode = "rgmii-id"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; }; }; }; diff --git a/arch/arm/boot/dts/armada-385.dtsi b/arch/arm/boot/dts/armada-385.dtsi index 83392b92dae2..be8d607c59b2 100644 --- a/arch/arm/boot/dts/armada-385.dtsi +++ b/arch/arm/boot/dts/armada-385.dtsi @@ -93,7 +93,7 @@ /* x1 port */ pcie2: pcie@2,0 { device_type = "pci"; - assigned-addresses = <0x82000800 0 0x40000 0 0x2000>; + assigned-addresses = <0x82001000 0 0x40000 0 0x2000>; reg = <0x1000 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; @@ -121,7 +121,7 @@ /* x1 port */ pcie3: pcie@3,0 { device_type = "pci"; - assigned-addresses = <0x82000800 0 0x44000 0 0x2000>; + assigned-addresses = <0x82001800 0 0x44000 0 0x2000>; reg = <0x1800 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; @@ -152,7 +152,7 @@ */ pcie4: pcie@4,0 { device_type = "pci"; - assigned-addresses = <0x82000800 0 0x48000 0 0x2000>; + assigned-addresses = <0x82002000 0 0x48000 0 0x2000>; reg = <0x2000 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi index 446861b6b17b..12933eff419f 100644 --- a/arch/arm/boot/dts/armada-38x.dtsi +++ b/arch/arm/boot/dts/armada-38x.dtsi @@ -304,7 +304,7 @@ }; gpio0: gpio@18100 { - compatible = "marvell,armada-370-gpio", + compatible = "marvell,armadaxp-gpio", "marvell,orion-gpio"; reg = <0x18100 0x40>, <0x181c0 0x08>; reg-names = "gpio", "pwm"; @@ -323,7 +323,7 @@ }; gpio1: gpio@18140 { - compatible = "marvell,armada-370-gpio", + compatible = "marvell,armadaxp-gpio", "marvell,orion-gpio"; reg = <0x18140 0x40>, <0x181c8 0x08>; reg-names = "gpio", "pwm"; diff --git a/arch/arm/boot/dts/armada-39x.dtsi b/arch/arm/boot/dts/armada-39x.dtsi index 923b035a3ab3..1e05208d9f34 100644 --- a/arch/arm/boot/dts/armada-39x.dtsi +++ b/arch/arm/boot/dts/armada-39x.dtsi @@ -213,7 +213,7 @@ }; gpio0: gpio@18100 { - compatible = "marvell,orion-gpio"; + compatible = "marvell,armadaxp-gpio", "marvell,orion-gpio"; reg = <0x18100 0x40>; ngpios = <32>; gpio-controller; @@ -227,7 +227,7 @@ }; gpio1: gpio@18140 { - compatible = "marvell,orion-gpio"; + compatible = "marvell,armadaxp-gpio", "marvell,orion-gpio"; reg = <0x18140 0x40>; ngpios = <28>; gpio-controller; @@ -463,7 +463,7 @@ /* x1 port */ pcie@2,0 { device_type = "pci"; - assigned-addresses = <0x82000800 0 0x40000 0 0x2000>; + assigned-addresses = <0x82001000 0 0x40000 0 0x2000>; reg = <0x1000 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; @@ -492,7 +492,7 @@ /* x1 port */ pcie@3,0 { device_type = "pci"; - assigned-addresses = <0x82000800 0 0x44000 0 0x2000>; + assigned-addresses = <0x82001800 0 0x44000 0 0x2000>; reg = <0x1800 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; @@ -524,7 +524,7 @@ */ pcie@4,0 { device_type = "pci"; - assigned-addresses = <0x82000800 0 0x48000 0 0x2000>; + assigned-addresses = <0x82002000 0 0x48000 0 0x2000>; reg = <0x2000 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; diff --git a/arch/arm/boot/dts/armada-xp-98dx3236.dtsi b/arch/arm/boot/dts/armada-xp-98dx3236.dtsi index b21ffb819b1d..7a7e2066c498 100644 --- a/arch/arm/boot/dts/armada-xp-98dx3236.dtsi +++ b/arch/arm/boot/dts/armada-xp-98dx3236.dtsi @@ -296,6 +296,7 @@ compatible = "marvell,armada-xp-wdt"; clocks = <&coreclk 2>, <&refclk>; clock-names = "nbclk", "fixed"; + interrupts = <93>, <38>; }; &cpurst { diff --git a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts index 622ac40dd164..dbe8dfe236fb 100644 --- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts +++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts @@ -195,7 +195,7 @@ pinctrl-0 = <&power_led_pin>; pinctrl-names = "default"; - power { + led-power { label = "mamba:white:power"; gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; default-state = "on"; diff --git a/arch/arm/boot/dts/armada-xp-mv78230.dtsi b/arch/arm/boot/dts/armada-xp-mv78230.dtsi index bf9360f41e0a..5ea9d509cd30 100644 --- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi @@ -107,7 +107,7 @@ pcie2: pcie@2,0 { device_type = "pci"; - assigned-addresses = <0x82000800 0 0x44000 0 0x2000>; + assigned-addresses = <0x82001000 0 0x44000 0 0x2000>; reg = <0x1000 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; @@ -135,7 +135,7 @@ pcie3: pcie@3,0 { device_type = "pci"; - assigned-addresses = <0x82000800 0 0x48000 0 0x2000>; + assigned-addresses = <0x82001800 0 0x48000 0 0x2000>; reg = <0x1800 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; @@ -163,7 +163,7 @@ pcie4: pcie@4,0 { device_type = "pci"; - assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>; + assigned-addresses = <0x82002000 0 0x4c000 0 0x2000>; reg = <0x2000 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; @@ -191,7 +191,7 @@ pcie5: pcie@5,0 { device_type = "pci"; - assigned-addresses = <0x82000800 0 0x80000 0 0x2000>; + assigned-addresses = <0x82002800 0 0x80000 0 0x2000>; reg = <0x2800 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; diff --git a/arch/arm/boot/dts/armada-xp-mv78260.dtsi b/arch/arm/boot/dts/armada-xp-mv78260.dtsi index 0714af52e607..6c6fbb9faf5a 100644 --- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi @@ -122,7 +122,7 @@ pcie2: pcie@2,0 { device_type = "pci"; - assigned-addresses = <0x82000800 0 0x44000 0 0x2000>; + assigned-addresses = <0x82001000 0 0x44000 0 0x2000>; reg = <0x1000 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; @@ -150,7 +150,7 @@ pcie3: pcie@3,0 { device_type = "pci"; - assigned-addresses = <0x82000800 0 0x48000 0 0x2000>; + assigned-addresses = <0x82001800 0 0x48000 0 0x2000>; reg = <0x1800 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; @@ -178,7 +178,7 @@ pcie4: pcie@4,0 { device_type = "pci"; - assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>; + assigned-addresses = <0x82002000 0 0x4c000 0 0x2000>; reg = <0x2000 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; @@ -206,7 +206,7 @@ pcie5: pcie@5,0 { device_type = "pci"; - assigned-addresses = <0x82000800 0 0x80000 0 0x2000>; + assigned-addresses = <0x82002800 0 0x80000 0 0x2000>; reg = <0x2800 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; @@ -234,7 +234,7 @@ pcie6: pcie@6,0 { device_type = "pci"; - assigned-addresses = <0x82000800 0 0x84000 0 0x2000>; + assigned-addresses = <0x82003000 0 0x84000 0 0x2000>; reg = <0x3000 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; @@ -262,7 +262,7 @@ pcie7: pcie@7,0 { device_type = "pci"; - assigned-addresses = <0x82000800 0 0x88000 0 0x2000>; + assigned-addresses = <0x82003800 0 0x88000 0 0x2000>; reg = <0x3800 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; @@ -290,7 +290,7 @@ pcie8: pcie@8,0 { device_type = "pci"; - assigned-addresses = <0x82000800 0 0x8c000 0 0x2000>; + assigned-addresses = <0x82004000 0 0x8c000 0 0x2000>; reg = <0x4000 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; @@ -318,7 +318,7 @@ pcie9: pcie@9,0 { device_type = "pci"; - assigned-addresses = <0x82000800 0 0x42000 0 0x2000>; + assigned-addresses = <0x82004800 0 0x42000 0 0x2000>; reg = <0x4800 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; diff --git a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts index 8ea73587db81..31933f81144e 100644 --- a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts +++ b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts @@ -121,11 +121,11 @@ }; clocks { - g762_clk: g762-oscillator { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <32768>; - }; + g762_clk: g762-oscillator { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; }; gpio-leds { diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi index 6c19984d668e..4297482da62f 100644 --- a/arch/arm/boot/dts/armada-xp.dtsi +++ b/arch/arm/boot/dts/armada-xp.dtsi @@ -260,6 +260,7 @@ compatible = "marvell,armada-xp-wdt"; clocks = <&coreclk 2>, <&refclk>; clock-names = "nbclk", "fixed"; + interrupts = <93>, <38>; }; &cpurst { diff --git a/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts b/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts index d127cbcc7998..0a51d2e32fab 100644 --- a/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts +++ b/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts @@ -342,6 +342,10 @@ &i2c0 { status = "okay"; + ssif-bmc@10 { + compatible = "ssif-bmc"; + reg = <0x10>; + }; }; &i2c1 { @@ -350,6 +354,14 @@ &i2c2 { status = "okay"; + smpro@4f { + compatible = "ampere,smpro"; + reg = <0x4f>; + }; + smpro@4e { + compatible = "ampere,smpro"; + reg = <0x4e>; + }; }; &i2c3 { diff --git a/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts b/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts index 606cd4be245a..4b91600eaf62 100644 --- a/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts +++ b/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts @@ -445,6 +445,10 @@ &i2c11 { status = "okay"; + ssif-bmc@10 { + compatible = "ssif-bmc"; + reg = <0x10>; + }; }; &i2c14 { diff --git a/arch/arm/boot/dts/aspeed-bmc-delta-ahe50dc.dts b/arch/arm/boot/dts/aspeed-bmc-delta-ahe50dc.dts new file mode 100644 index 000000000000..6600f7e9bf5e --- /dev/null +++ b/arch/arm/boot/dts/aspeed-bmc-delta-ahe50dc.dts @@ -0,0 +1,418 @@ +// SPDX-License-Identifier: GPL-2.0+ +/dts-v1/; + +#include "aspeed-g4.dtsi" +#include <dt-bindings/gpio/aspeed-gpio.h> + +#define EFUSE_OUTPUT(n) \ + efuse##n { \ + compatible = "regulator-output"; \ + vout-supply = <&efuse##n>; \ + } + +#define __stringify(x) #x + +#define EFUSE(hexaddr, num) \ + efuse@##hexaddr { \ + compatible = "lm25066"; \ + reg = <0x##hexaddr>; \ + shunt-resistor-micro-ohms = <675>; \ + regulators { \ + efuse##num: vout0 { \ + regulator-name = __stringify(efuse##num##-reg); \ + }; \ + }; \ + } + +/{ + model = "Delta Power AHE-50DC"; + compatible = "delta,ahe50dc-bmc", "aspeed,ast2400"; + + aliases { + serial4 = &uart5; + + /* + * pca9541-arbitrated logical i2c buses are numbered as the + * corresponding physical bus plus 20 + */ + i2c20 = &i2carb0; + i2c21 = &i2carb1; + i2c22 = &i2carb2; + i2c23 = &i2carb3; + i2c24 = &i2carb4; + i2c26 = &i2carb6; + i2c27 = &i2carb7; + i2c28 = &i2carb8; + i2c32 = &i2carb12; + }; + + chosen { + stdout-path = &uart3; + bootargs = "console=ttyS2,115200n8 earlycon"; + }; + + memory@40000000 { + reg = <0x40000000 0x10000000>; + }; + + leds { + compatible = "gpio-leds"; + + heartbeat { + gpios = <&gpio ASPEED_GPIO(P, 0) GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + + panic { + gpios = <&gpio ASPEED_GPIO(P, 2) GPIO_ACTIVE_HIGH>; + linux,default-trigger = "panic"; + }; + }; + + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, <&adc 4>, + <&adc 5>, <&adc 6>, <&adc 7>, <&adc 8>, <&adc 9>; + }; + + EFUSE_OUTPUT(01); + EFUSE_OUTPUT(02); + EFUSE_OUTPUT(03); + EFUSE_OUTPUT(04); + EFUSE_OUTPUT(05); + EFUSE_OUTPUT(06); + EFUSE_OUTPUT(07); + EFUSE_OUTPUT(08); + EFUSE_OUTPUT(09); + EFUSE_OUTPUT(10); + EFUSE_OUTPUT(11); + EFUSE_OUTPUT(12); + EFUSE_OUTPUT(13); + EFUSE_OUTPUT(14); + EFUSE_OUTPUT(15); + EFUSE_OUTPUT(16); + EFUSE_OUTPUT(17); + EFUSE_OUTPUT(18); + EFUSE_OUTPUT(19); + EFUSE_OUTPUT(20); + EFUSE_OUTPUT(21); + EFUSE_OUTPUT(22); + EFUSE_OUTPUT(23); + EFUSE_OUTPUT(24); + EFUSE_OUTPUT(25); + EFUSE_OUTPUT(26); + EFUSE_OUTPUT(27); + EFUSE_OUTPUT(28); + EFUSE_OUTPUT(29); + EFUSE_OUTPUT(30); + EFUSE_OUTPUT(31); + EFUSE_OUTPUT(32); + EFUSE_OUTPUT(33); + EFUSE_OUTPUT(34); + EFUSE_OUTPUT(35); + EFUSE_OUTPUT(36); + EFUSE_OUTPUT(37); + EFUSE_OUTPUT(38); + EFUSE_OUTPUT(39); + EFUSE_OUTPUT(40); + EFUSE_OUTPUT(41); + EFUSE_OUTPUT(42); + EFUSE_OUTPUT(43); + EFUSE_OUTPUT(44); + EFUSE_OUTPUT(45); + EFUSE_OUTPUT(46); + EFUSE_OUTPUT(47); + EFUSE_OUTPUT(48); + EFUSE_OUTPUT(49); + EFUSE_OUTPUT(50); + +}; + +&fmc { + status = "okay"; + + flash@0 { + status = "okay"; + m25p,fast-read; + label = "flash0"; + spi-max-frequency = <50000000>; // 50 MHz +#include "openbmc-flash-layout.dtsi" + }; +}; + +&uart3 { + status = "okay"; +}; + +&mac1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>; +}; + +&i2c0 { + status = "okay"; + bus-frequency = <200000>; + + pca9541@79 { + compatible = "nxp,pca9541"; + reg = <0x79>; + + i2carb0: i2c-arb { + #address-cells = <1>; + #size-cells = <0>; + + /* lm25066 efuses @ 10-17, 40-47, 50-57 */ + EFUSE(10, 03); + EFUSE(11, 04); + EFUSE(12, 01); + EFUSE(13, 02); + EFUSE(14, 13); + EFUSE(15, 14); + EFUSE(16, 15); + EFUSE(17, 16); + EFUSE(40, 12); + EFUSE(41, 11); + EFUSE(42, 10); + EFUSE(43, 09); + EFUSE(44, 08); + EFUSE(45, 07); + EFUSE(46, 05); + EFUSE(47, 06); + EFUSE(50, 17); + EFUSE(51, 18); + EFUSE(52, 20); + EFUSE(53, 19); + EFUSE(54, 22); + EFUSE(55, 21); + EFUSE(56, 24); + EFUSE(57, 23); + }; + }; +}; + +&i2c1 { + status = "okay"; + bus-frequency = <200000>; + + pca9541@72 { + compatible = "nxp,pca9541"; + reg = <0x72>; + + i2carb1: i2c-arb { + #address-cells = <1>; + #size-cells = <0>; + }; + }; +}; + +&i2c2 { + status = "okay"; + bus-frequency = <200000>; + + pca9541@73 { + compatible = "nxp,pca9541"; + reg = <0x73>; + + i2carb2: i2c-arb { + #address-cells = <1>; + #size-cells = <0>; + }; + }; +}; + +&i2c3 { + status = "okay"; + bus-frequency = <200000>; + + pca9541@74 { + compatible = "nxp,pca9541"; + reg = <0x74>; + + i2carb3: i2c-arb { + #address-cells = <1>; + #size-cells = <0>; + }; + }; +}; + +&i2c4 { + status = "okay"; + bus-frequency = <200000>; + + pca9541@7a { + compatible = "nxp,pca9541"; + reg = <0x7a>; + + i2carb4: i2c-arb { + #address-cells = <1>; + #size-cells = <0>; + + gpio@20 { + compatible = "nxp,pca9534"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + }; + + /* lm25066 efuses @ 10-17, 40-47, 50-57, 59, 5a */ + EFUSE(10, 27); + EFUSE(11, 28); + EFUSE(12, 25); + EFUSE(13, 26); + EFUSE(14, 37); + EFUSE(15, 38); + EFUSE(16, 39); + EFUSE(17, 40); + EFUSE(40, 36); + EFUSE(41, 35); + EFUSE(42, 34); + EFUSE(43, 33); + EFUSE(44, 32); + EFUSE(45, 31); + EFUSE(46, 29); + EFUSE(47, 30); + EFUSE(50, 41); + EFUSE(51, 42); + EFUSE(52, 44); + EFUSE(53, 43); + EFUSE(54, 46); + EFUSE(55, 45); + EFUSE(56, 48); + EFUSE(57, 47); + EFUSE(59, 49); + EFUSE(5a, 50); + }; + }; +}; + +&i2c6 { + status = "okay"; + bus-frequency = <200000>; + + pca9541@75 { + compatible = "nxp,pca9541"; + reg = <0x75>; + + i2carb6: i2c-arb { + #address-cells = <1>; + #size-cells = <0>; + }; + }; +}; + +&i2c7 { + status = "okay"; + bus-frequency = <200000>; + + pca9541@76 { + compatible = "nxp,pca9541"; + reg = <0x76>; + + i2carb7: i2c-arb { + #address-cells = <1>; + #size-cells = <0>; + }; + }; +}; + +&i2c8 { + status = "okay"; + bus-frequency = <200000>; + + pca9541@7c { + compatible = "nxp,pca9541"; + reg = <0x7c>; + + i2carb8: i2c-arb { + #address-cells = <1>; + #size-cells = <0>; + + fancontrol@30 { + compatible = "delta,ahe50dc-fan"; + reg = <0x30>; + }; + + /* Baseboard FRU eeprom */ + eeprom@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + }; + }; + }; +}; + +&i2c12 { + status = "okay"; + bus-frequency = <200000>; + + pca9541@71 { + compatible = "nxp,pca9541"; + reg = <0x71>; + + i2carb12: i2c-arb { + #address-cells = <1>; + #size-cells = <0>; + }; + }; +}; + +&gpio { + status = "okay"; + gpio-line-names = + /* A */ "", "", "", "", "", "", "", "", + /* B */ "", "", "", "", "", "", "", "", + /* C */ "RESET_PEER_N", "HEARTBEAT_OUT", "", "", "", "", "", "", + /* D */ "", "", "", "", "", "", "", "", + /* E */ "DOOM_N", "", "", "", "", "LED_PWR_BLUE", "", "", + /* F */ "", "", "", "", "", "", "", "", + /* G */ "", "", "", "", "", "", "", "", + /* H */ "", "", "", "", "", "", "", "", + /* I */ "", "", "", "", "", "", "", "", + /* J */ "", "", "BMC_ID", "", "", "", "", "", + /* K */ "", "", "", "", "", "", "", "", + /* L */ "", "", "", "", "", "", "", "", + /* M */ "", "", "", "", "", "", "", "", + /* N */ "", "", "", "", "", "", "", "", + /* O */ "", "", "", "", "", "", "", "", + /* P */ "LED_GREEN", "", "LED_RED", "", "", "", "", "", + /* Q */ "", "", "", "", "", "", "", "", + /* R */ "", "", "", "", "", "", "", "", + /* S */ "", "", "", "", "", "", "", "", + /* T */ "", "", "", "", "", "", "", "", + /* U */ "", "", "", "", "", "", "", "", + /* V */ "", "", "", "", "", "", "", "", + /* W */ "", "", "", "", "", "", "", "", + /* X */ "", "", "", "", "", "", "", "", + /* Y */ "HEARTBEAT_IN", "BOARDREV0", "BOARDREV1", "", + /* Z */ "", "", "", "", "", "", "", "", + /* AA */ "", "", "", "", "", "", "", "", + /* AB */ "", "", "", ""; + + /* + * I don't rightly know what this GPIO really *is*, but setting it to + * zero causes the fans to run at full speed, after which setting it + * back to one causes a power output glitch, so install a hog to keep + * it at one as a failsafe to ensure nothing accidentally touches it. + */ + doom-guardrail { + gpio-hog; + gpios = <ASPEED_GPIO(E, 0) GPIO_ACTIVE_LOW>; + output-low; + }; +}; + +&adc { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc0_default + &pinctrl_adc1_default + &pinctrl_adc2_default + &pinctrl_adc3_default + &pinctrl_adc4_default + &pinctrl_adc5_default + &pinctrl_adc6_default + &pinctrl_adc7_default + &pinctrl_adc8_default + &pinctrl_adc9_default>; +}; diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-bletchley.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-bletchley.dts index 1fc3e7cbf0d1..a619eec70633 100644 --- a/arch/arm/boot/dts/aspeed-bmc-facebook-bletchley.dts +++ b/arch/arm/boot/dts/aspeed-bmc-facebook-bletchley.dts @@ -60,7 +60,7 @@ compatible = "gpio-leds"; sys_log_id { default-state = "off"; - gpios = <&front_leds 0 GPIO_ACTIVE_HIGH>; + gpios = <&front_leds 0 GPIO_ACTIVE_LOW>; }; }; @@ -191,6 +191,95 @@ gpios = <&sled6_leds 1 GPIO_ACTIVE_LOW>; }; }; + + gpio-keys { + compatible = "gpio-keys"; + + presence-sled1 { + label = "presence-sled1"; + gpios = <&gpio0 ASPEED_GPIO(H, 2) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(H, 2)>; + }; + presence-sled2 { + label = "presence-sled2"; + gpios = <&gpio0 ASPEED_GPIO(H, 3) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(H, 3)>; + }; + presence-sled3 { + label = "presence-sled3"; + gpios = <&gpio0 ASPEED_GPIO(H, 4) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(H, 4)>; + }; + presence-sled4 { + label = "presence-sled4"; + gpios = <&gpio0 ASPEED_GPIO(H, 5) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(H, 5)>; + }; + presence-sled5 { + label = "presence-sled5"; + gpios = <&gpio0 ASPEED_GPIO(H, 6) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(H, 6)>; + }; + presence-sled6 { + label = "presence-sled6"; + gpios = <&gpio0 ASPEED_GPIO(H, 7) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(H, 7)>; + }; + }; + + vbus_sled1: vbus_sled1 { + compatible = "regulator-fixed"; + regulator-name = "vbus_sled1"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&sled1_ioexp 1 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vbus_sled2: vbus_sled2 { + compatible = "regulator-fixed"; + regulator-name = "vbus_sled2"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&sled2_ioexp 1 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vbus_sled3: vbus_sled3 { + compatible = "regulator-fixed"; + regulator-name = "vbus_sled3"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&sled3_ioexp 1 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vbus_sled4: vbus_sled4 { + compatible = "regulator-fixed"; + regulator-name = "vbus_sled4"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&sled4_ioexp 1 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vbus_sled5: vbus_sled5 { + compatible = "regulator-fixed"; + regulator-name = "vbus_sled5"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&sled5_ioexp 1 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vbus_sled6: vbus_sled6 { + compatible = "regulator-fixed"; + regulator-name = "vbus_sled6"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&sled6_ioexp 1 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; }; &mac2 { @@ -302,17 +391,17 @@ compatible = "fcs,fusb302"; reg = <0x22>; + interrupt-parent = <&gpio0>; + interrupts = <ASPEED_GPIO(B, 0) IRQ_TYPE_LEVEL_LOW>; + vbus-supply = <&vbus_sled1>; + connector { compatible = "usb-c-connector"; label = "USB-C"; - power-role = "dual"; - try-power-role = "sink"; - data-role = "dual"; - source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>; - sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM) - PDO_VAR(3000, 12000, 3000) - PDO_PPS_APDO(3000, 11000, 3000)>; - op-sink-microwatt = <10000000>; + power-role = "source"; + data-role = "host"; + pd-disable; + typec-power-opmode = "default"; }; }; @@ -388,17 +477,17 @@ compatible = "fcs,fusb302"; reg = <0x22>; + interrupt-parent = <&gpio0>; + interrupts = <ASPEED_GPIO(B, 1) IRQ_TYPE_LEVEL_LOW>; + vbus-supply = <&vbus_sled2>; + connector { compatible = "usb-c-connector"; label = "USB-C"; - power-role = "dual"; - try-power-role = "sink"; - data-role = "dual"; - source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>; - sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM) - PDO_VAR(3000, 12000, 3000) - PDO_PPS_APDO(3000, 11000, 3000)>; - op-sink-microwatt = <10000000>; + power-role = "source"; + data-role = "host"; + pd-disable; + typec-power-opmode = "default"; }; }; @@ -474,17 +563,17 @@ compatible = "fcs,fusb302"; reg = <0x22>; + interrupt-parent = <&gpio0>; + interrupts = <ASPEED_GPIO(B, 7) IRQ_TYPE_LEVEL_LOW>; + vbus-supply = <&vbus_sled3>; + connector { compatible = "usb-c-connector"; label = "USB-C"; - power-role = "dual"; - try-power-role = "sink"; - data-role = "dual"; - source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>; - sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM) - PDO_VAR(3000, 12000, 3000) - PDO_PPS_APDO(3000, 11000, 3000)>; - op-sink-microwatt = <10000000>; + power-role = "source"; + data-role = "host"; + pd-disable; + typec-power-opmode = "default"; }; }; @@ -560,17 +649,17 @@ compatible = "fcs,fusb302"; reg = <0x22>; + interrupt-parent = <&gpio0>; + interrupts = <ASPEED_GPIO(S, 7) IRQ_TYPE_LEVEL_LOW>; + vbus-supply = <&vbus_sled4>; + connector { compatible = "usb-c-connector"; label = "USB-C"; - power-role = "dual"; - try-power-role = "sink"; - data-role = "dual"; - source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>; - sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM) - PDO_VAR(3000, 12000, 3000) - PDO_PPS_APDO(3000, 11000, 3000)>; - op-sink-microwatt = <10000000>; + power-role = "source"; + data-role = "host"; + pd-disable; + typec-power-opmode = "default"; }; }; @@ -646,17 +735,17 @@ compatible = "fcs,fusb302"; reg = <0x22>; + interrupt-parent = <&gpio0>; + interrupts = <ASPEED_GPIO(Y, 3) IRQ_TYPE_LEVEL_LOW>; + vbus-supply = <&vbus_sled5>; + connector { compatible = "usb-c-connector"; label = "USB-C"; - power-role = "dual"; - try-power-role = "sink"; - data-role = "dual"; - source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>; - sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM) - PDO_VAR(3000, 12000, 3000) - PDO_PPS_APDO(3000, 11000, 3000)>; - op-sink-microwatt = <10000000>; + power-role = "source"; + data-role = "host"; + pd-disable; + typec-power-opmode = "default"; }; }; @@ -732,17 +821,17 @@ compatible = "fcs,fusb302"; reg = <0x22>; + interrupt-parent = <&gpio0>; + interrupts = <ASPEED_GPIO(I, 7) IRQ_TYPE_LEVEL_LOW>; + vbus-supply = <&vbus_sled6>; + connector { compatible = "usb-c-connector"; label = "USB-C"; - power-role = "dual"; - try-power-role = "sink"; - data-role = "dual"; - source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>; - sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM) - PDO_VAR(3000, 12000, 3000) - PDO_PPS_APDO(3000, 11000, 3000)>; - op-sink-microwatt = <10000000>; + power-role = "source"; + data-role = "host"; + pd-disable; + typec-power-opmode = "default"; }; }; @@ -863,6 +952,9 @@ }; &gpio0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpiov2_unbiased_default>; + gpio-line-names = /*A0-A7*/ "","","","","","","","", /*B0-B7*/ "FUSB302_SLED1_INT_N","FUSB302_SLED2_INT_N", @@ -892,11 +984,11 @@ /*M0-M7*/ "ALERT_SLED1_N","ALERT_SLED2_N", "ALERT_SLED3_N","ALERT_SLED4_N", "ALERT_SLED5_N","ALERT_SLED6_N", - "","", + "","USB_DEBUG_PWR_BTN_N", /*N0-N7*/ "LED_POSTCODE_0","LED_POSTCODE_1", "LED_POSTCODE_2","LED_POSTCODE_3", "LED_POSTCODE_4","LED_POSTCODE_5", - "LED_POSTCODE_5","LED_POSTCODE_7", + "LED_POSTCODE_6","LED_POSTCODE_7", /*O0-O7*/ "","","","", "","BOARD_ID0","BOARD_ID1","BOARD_ID2", /*P0-P7*/ "","","","","","","","BMC_HEARTBEAT", @@ -953,3 +1045,22 @@ &ehci0 { status = "okay"; }; + +&ehci1 { + status = "okay"; +}; + +&emmc_controller { + status = "okay"; +}; + +&emmc { + status = "okay"; +}; + +&pinctrl { + pinctrl_gpiov2_unbiased_default: gpiov2 { + pins = "AD14"; + bias-disable; + }; +}; diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-cloudripper.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-cloudripper.dts index 9c6271a17ae8..5cd060029ea9 100644 --- a/arch/arm/boot/dts/aspeed-bmc-facebook-cloudripper.dts +++ b/arch/arm/boot/dts/aspeed-bmc-facebook-cloudripper.dts @@ -77,7 +77,7 @@ i2c55 = &imux55; }; - spi_gpio: spi-gpio { + spi_gpio: spi { num-chipselects = <2>; cs-gpios = <&gpio0 ASPEED_GPIO(X, 0) GPIO_ACTIVE_LOW>, <&gpio0 ASPEED_GPIO(X, 1) GPIO_ACTIVE_HIGH>; diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-elbert.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-elbert.dts index 8e1a1d1b282d..b5cd4c7800b0 100644 --- a/arch/arm/boot/dts/aspeed-bmc-facebook-elbert.dts +++ b/arch/arm/boot/dts/aspeed-bmc-facebook-elbert.dts @@ -44,7 +44,7 @@ stdout-path = &uart5; }; - spi_gpio: spi-gpio { + spi_gpio: spi { num-chipselects = <1>; cs-gpios = <&gpio0 ASPEED_GPIO(X, 0) GPIO_ACTIVE_LOW>; }; diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-fuji.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-fuji.dts index af58a73bbc49..6b319f34a9b9 100644 --- a/arch/arm/boot/dts/aspeed-bmc-facebook-fuji.dts +++ b/arch/arm/boot/dts/aspeed-bmc-facebook-fuji.dts @@ -207,7 +207,7 @@ i2c143 = &imux143; }; - spi_gpio: spi-gpio { + spi_gpio: spi { num-chipselects = <3>; cs-gpios = <&gpio0 ASPEED_GPIO(X, 0) GPIO_ACTIVE_LOW>, <0>, /* device reg=<1> does not exist */ diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-wedge400.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-wedge400.dts index a901c8be49b9..ed305948386f 100644 --- a/arch/arm/boot/dts/aspeed-bmc-facebook-wedge400.dts +++ b/arch/arm/boot/dts/aspeed-bmc-facebook-wedge400.dts @@ -67,7 +67,7 @@ * full-duplex SPI transactions are not supported by ASPEED SPI * Controllers. */ - spi_gpio: spi-gpio { + spi_gpio: spi { status = "okay"; compatible = "spi-gpio"; #address-cells = <1>; diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-bonnell.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-bonnell.dts new file mode 100644 index 000000000000..d1971ddf06a5 --- /dev/null +++ b/arch/arm/boot/dts/aspeed-bmc-ibm-bonnell.dts @@ -0,0 +1,921 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +// Copyright 2022 IBM Corp. +/dts-v1/; + +#include "aspeed-g6.dtsi" +#include <dt-bindings/gpio/aspeed-gpio.h> +#include <dt-bindings/i2c/i2c.h> +#include <dt-bindings/leds/leds-pca955x.h> + +/ { + model = "Bonnell"; + compatible = "ibm,bonnell-bmc", "aspeed,ast2600"; + + aliases { + i2c100 = &cfam0_i2c0; + i2c101 = &cfam0_i2c1; + i2c110 = &cfam0_i2c10; + i2c111 = &cfam0_i2c11; + i2c112 = &cfam0_i2c12; + i2c113 = &cfam0_i2c13; + i2c114 = &cfam0_i2c14; + i2c115 = &cfam0_i2c15; + i2c202 = &cfam1_i2c2; + i2c203 = &cfam1_i2c3; + i2c210 = &cfam1_i2c10; + i2c211 = &cfam1_i2c11; + i2c214 = &cfam1_i2c14; + i2c215 = &cfam1_i2c15; + i2c216 = &cfam1_i2c16; + i2c217 = &cfam1_i2c17; + + serial4 = &uart5; + i2c16 = &i2c11mux0chn0; + i2c17 = &i2c11mux0chn1; + i2c18 = &i2c11mux0chn2; + i2c19 = &i2c11mux0chn3; + + spi10 = &cfam0_spi0; + spi11 = &cfam0_spi1; + spi12 = &cfam0_spi2; + spi13 = &cfam0_spi3; + spi20 = &cfam1_spi0; + spi21 = &cfam1_spi1; + spi22 = &cfam1_spi2; + spi23 = &cfam1_spi3; + + }; + + chosen { + stdout-path = &uart5; + bootargs = "console=ttyS4,115200n8 earlycon"; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x40000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + ramoops@b3e00000 { + compatible = "ramoops"; + reg = <0xb3e00000 0x200000>; /* 16 * (4 * 0x8000) */ + record-size = <0x8000>; + console-size = <0x8000>; + ftrace-size = <0x8000>; + pmsg-size = <0x8000>; + max-reason = <3>; /* KMSG_DUMP_EMERG */ + }; + + /* LPC FW cycle bridge region requires natural alignment */ + flash_memory: region@b4000000 { + no-map; + reg = <0xb4000000 0x04000000>; /* 64M */ + }; + + /* VGA region is dictated by hardware strapping */ + vga_memory: region@bf000000 { + no-map; + compatible = "shared-dma-pool"; + reg = <0xbf000000 0x01000000>; /* 16M */ + }; + }; + + leds { + compatible = "gpio-leds"; + + fan0 { + gpios = <&gpio0 ASPEED_GPIO(G, 0) GPIO_ACTIVE_LOW>; + }; + + fan1 { + gpios = <&gpio0 ASPEED_GPIO(G, 1) GPIO_ACTIVE_LOW>; + }; + + rear-enc-id0 { + gpios = <&gpio0 ASPEED_GPIO(H, 2) GPIO_ACTIVE_LOW>; + }; + + rear-enc-fault0 { + gpios = <&gpio0 ASPEED_GPIO(H, 3) GPIO_ACTIVE_LOW>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <1000>; + + fan0-presence { + label = "fan0-presence"; + gpios = <&gpio0 ASPEED_GPIO(F, 4) GPIO_ACTIVE_LOW>; + linux,code = <6>; + }; + + fan1-presence { + label = "fan1-presence"; + gpios = <&gpio0 ASPEED_GPIO(F, 5) GPIO_ACTIVE_LOW>; + linux,code = <7>; + }; + }; + + iio-hwmon-battery { + compatible = "iio-hwmon"; + io-channels = <&adc1 7>; + }; +}; + +&adc1 { + status = "okay"; + aspeed,int-vref-microvolt = <2500000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default + &pinctrl_adc10_default &pinctrl_adc11_default + &pinctrl_adc12_default &pinctrl_adc13_default + &pinctrl_adc14_default &pinctrl_adc15_default>; +}; + +&ehci1 { + status = "okay"; +}; + +&uhci { + status = "okay"; +}; + +&gpio0 { + gpio-line-names = + /*A0-A7*/ "","","","","","","","", + /*B0-B7*/ "","","","","","","checkstop","", + /*C0-C7*/ "","","","","","","","", + /*D0-D7*/ "","","","","","","","", + /*E0-E7*/ "","","","","","","","", + /*F0-F7*/ "","","rtc-battery-voltage-read-enable","reset-cause-pinhole","","","","", + /*G0-G7*/ "fan0","fan1","","","","","","", + /*H0-H7*/ "","","rear-enc-id0","rear-enc-fault0","","","","", + /*I0-I7*/ "","","","","","","bmc-secure-boot","", + /*J0-J7*/ "","","","","","","","", + /*K0-K7*/ "","","","","","","","", + /*L0-L7*/ "","","","","","","","", + /*M0-M7*/ "","","","","","","","", + /*N0-N7*/ "","","","","","","","", + /*O0-O7*/ "","","","usb-power","","","","", + /*P0-P7*/ "","","","","","","","", + /*Q0-Q7*/ "cfam-reset","","regulator-standby-faulted","","","","","", + /*R0-R7*/ "bmc-tpm-reset","power-chassis-control","power-chassis-good","","","","","", + /*S0-S7*/ "presence-ps0","presence-ps1","","","power-ffs-sync-history","","","", + /*T0-T7*/ "","","","","","","","", + /*U0-U7*/ "","","","","","","","", + /*V0-V7*/ "","","","","","","","", + /*W0-W7*/ "","","","","","","","", + /*X0-X7*/ "","","","","","","","", + /*Y0-Y7*/ "","","","","","","","", + /*Z0-Z7*/ "","","","","","","",""; + + usb_power { + gpio-hog; + gpios = <ASPEED_GPIO(O, 3) GPIO_ACTIVE_LOW>; + output-high; + }; +}; + +&emmc_controller { + status = "okay"; +}; + +&pinctrl_emmc_default { + bias-disable; +}; + +&emmc { + status = "okay"; + clk-phase-mmc-hs200 = <180>, <180>; +}; + +&fsim0 { + status = "okay"; + + #address-cells = <2>; + #size-cells = <0>; + + cfam-reset-gpios = <&gpio0 ASPEED_GPIO(Q, 0) GPIO_ACTIVE_HIGH>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom@1000 { + compatible = "ibm,fsi2pib"; + reg = <0x1000 0x400>; + }; + + i2c@1800 { + compatible = "ibm,fsi-i2c-master"; + reg = <0x1800 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + cfam0_i2c0: i2c-bus@0 { + reg = <0>; /* OMI01 */ + }; + + cfam0_i2c1: i2c-bus@1 { + reg = <1>; /* OMI23 */ + }; + + cfam0_i2c10: i2c-bus@a { + reg = <10>; /* OP3A */ + }; + + cfam0_i2c11: i2c-bus@b { + reg = <11>; /* OP3B */ + }; + + cfam0_i2c12: i2c-bus@c { + reg = <12>; /* OP4A */ + }; + + cfam0_i2c13: i2c-bus@d { + reg = <13>; /* OP4B */ + }; + + cfam0_i2c14: i2c-bus@e { + reg = <14>; /* OP5A */ + }; + + cfam0_i2c15: i2c-bus@f { + reg = <15>; /* OP5B */ + }; + }; + + fsi2spi@1c00 { + compatible = "ibm,fsi2spi"; + reg = <0x1c00 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + cfam0_spi0: spi@0 { + reg = <0x0>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + at25,byte-len = <0x80000>; + at25,addr-mode = <4>; + at25,page-size = <256>; + + compatible = "atmel,at25"; + reg = <0>; + spi-max-frequency = <1000000>; + }; + }; + + cfam0_spi1: spi@20 { + reg = <0x20>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + at25,byte-len = <0x80000>; + at25,addr-mode = <4>; + at25,page-size = <256>; + + compatible = "atmel,at25"; + reg = <0>; + spi-max-frequency = <1000000>; + }; + }; + + cfam0_spi2: spi@40 { + reg = <0x40>; + compatible = "ibm,fsi2spi-restricted"; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + at25,byte-len = <0x80000>; + at25,addr-mode = <4>; + at25,page-size = <256>; + + compatible = "atmel,at25"; + reg = <0>; + spi-max-frequency = <1000000>; + }; + }; + + cfam0_spi3: spi@60 { + reg = <0x60>; + compatible = "ibm,fsi2spi-restricted"; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + at25,byte-len = <0x80000>; + at25,addr-mode = <4>; + at25,page-size = <256>; + + compatible = "atmel,at25"; + reg = <0>; + spi-max-frequency = <1000000>; + }; + }; + }; + + sbefifo@2400 { + compatible = "ibm,p9-sbefifo"; + reg = <0x2400 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + fsi_occ0: occ { + compatible = "ibm,p10-occ"; + + occ-hwmon { + compatible = "ibm,p10-occ-hwmon"; + ibm,no-poll-on-init; + }; + }; + }; + + fsi_hub0: hub@3400 { + compatible = "fsi-master-hub"; + reg = <0x3400 0x400>; + #address-cells = <2>; + #size-cells = <0>; + }; + }; +}; + +&fsi_hub0 { + cfam@1,0 { + reg = <1 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <1>; + + scom@1000 { + compatible = "ibm,fsi2pib"; + reg = <0x1000 0x400>; + }; + + i2c@1800 { + compatible = "ibm,fsi-i2c-master"; + reg = <0x1800 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + cfam1_i2c2: i2c-bus@2 { + reg = <2>; /* OMI45 */ + }; + + cfam1_i2c3: i2c-bus@3 { + reg = <3>; /* OMI67 */ + }; + + cfam1_i2c10: i2c-bus@a { + reg = <10>; /* OP3A */ + }; + + cfam1_i2c11: i2c-bus@b { + reg = <11>; /* OP3B */ + }; + + cfam1_i2c14: i2c-bus@e { + reg = <14>; /* OP5A */ + }; + + cfam1_i2c15: i2c-bus@f { + reg = <15>; /* OP5B */ + }; + + cfam1_i2c16: i2c-bus@10 { + reg = <16>; /* OP6A */ + }; + + cfam1_i2c17: i2c-bus@11 { + reg = <17>; /* OP6B */ + }; + }; + + fsi2spi@1c00 { + compatible = "ibm,fsi2spi"; + reg = <0x1c00 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + cfam1_spi0: spi@0 { + reg = <0x0>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + at25,byte-len = <0x80000>; + at25,addr-mode = <4>; + at25,page-size = <256>; + + compatible = "atmel,at25"; + reg = <0>; + spi-max-frequency = <1000000>; + }; + }; + + cfam1_spi1: spi@20 { + reg = <0x20>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + at25,byte-len = <0x80000>; + at25,addr-mode = <4>; + at25,page-size = <256>; + + compatible = "atmel,at25"; + reg = <0>; + spi-max-frequency = <1000000>; + }; + }; + + cfam1_spi2: spi@40 { + reg = <0x40>; + compatible = "ibm,fsi2spi-restricted"; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + at25,byte-len = <0x80000>; + at25,addr-mode = <4>; + at25,page-size = <256>; + + compatible = "atmel,at25"; + reg = <0>; + spi-max-frequency = <1000000>; + }; + }; + + cfam1_spi3: spi@60 { + reg = <0x60>; + compatible = "ibm,fsi2spi-restricted"; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + at25,byte-len = <0x80000>; + at25,addr-mode = <4>; + at25,page-size = <256>; + + compatible = "atmel,at25"; + reg = <0>; + spi-max-frequency = <1000000>; + }; + }; + }; + + sbefifo@2400 { + compatible = "ibm,p9-sbefifo"; + reg = <0x2400 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + fsi_occ1: occ { + compatible = "ibm,p10-occ"; + + occ-hwmon { + compatible = "ibm,p10-occ-hwmon"; + ibm,no-poll-on-init; + }; + }; + }; + + fsi_hub1: hub@3400 { + compatible = "fsi-master-hub"; + reg = <0x3400 0x400>; + #address-cells = <2>; + #size-cells = <0>; + + no-scan-on-init; + }; + }; +}; + +&ibt { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + eeprom@51 { + compatible = "atmel,24c64"; + reg = <0x51>; + }; + + tca9554@20 { + compatible = "ti,tca9554"; + reg = <0x20>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = "", + "RUSSEL_FW_I2C_ENABLE_N", + "RUSSEL_OPPANEL_PRESENCE_N", + "BLYTH_OPPANEL_PRESENCE_N", + "CPU_TPM_CARD_PRESENT_N", + "", + "", + "DASD_BP_PRESENT_N"; + }; +}; + +&i2c1 { + status = "okay"; +}; + +&i2c2 { + status = "okay"; + + ucd90160@64 { + compatible = "ti,ucd90160"; + reg = <0x64>; + }; +}; + +&i2c3 { + status = "okay"; + + power-supply@58 { + compatible = "ibm,cffps"; + reg = <0x58>; + }; + + power-supply@59 { + compatible = "ibm,cffps"; + reg = <0x59>; + }; +}; + +&i2c4 { + status = "okay"; +}; + +&i2c5 { + status = "okay"; +}; + +&i2c6 { + status = "okay"; +}; + +&i2c7 { + multi-master; + status = "okay"; + + si7021-a20@40 { + compatible = "silabs,si7020"; + reg = <0x40>; + }; + + tmp275@48 { + compatible = "ti,tmp275"; + reg = <0x48>; + }; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + + eeprom@51 { + compatible = "atmel,24c64"; + reg = <0x51>; + }; + + max31785@52 { + compatible = "maxim,max31785a"; + reg = <0x52>; + #address-cells = <1>; + #size-cells = <0>; + + fan0: fan@0 { + compatible = "pmbus-fan"; + reg = <0>; + tach-pulses = <2>; + }; + + fan1: fan@1 { + compatible = "pmbus-fan"; + reg = <1>; + tach-pulses = <2>; + }; + }; + + pca9551@60 { + compatible = "nxp,pca9551"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + led@0 { + label = "front-sys-id0"; + reg = <0>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@1 { + label = "front-check-log0"; + reg = <1>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@2 { + label = "front-enc-fault1"; + reg = <2>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@3 { + label = "front-sys-pwron0"; + reg = <3>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + }; + + ibm-panel@62 { + compatible = "ibm,op-panel"; + reg = <(0x62 | I2C_OWN_SLAVE_ADDRESS)>; + }; + + dps: dps310@76 { + compatible = "infineon,dps310"; + reg = <0x76>; + #io-channel-cells = <0>; + }; +}; + +&i2c8 { + status = "okay"; + + rtc@32 { + compatible = "epson,rx8900"; + reg = <0x32>; + }; + + tmp275@48 { + compatible = "ti,tmp275"; + reg = <0x48>; + }; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + + pca9551@60 { + compatible = "nxp,pca9551"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = "", + "APSS_RESET_N", + "", + "N_MODE_CPU_N", + "", + "", + "P10_DCM_PRESENT", + ""; + }; +}; + +&i2c9 { + status = "okay"; + + tmp423a@4c { + compatible = "ti,tmp423"; + reg = <0x4c>; + }; +}; + +&i2c10 { + status = "okay"; +}; + +&i2c11 { + status = "okay"; + + tca9554@20 { + compatible = "ti,tca9554"; + reg = <0x20>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = "BOOT_RCVRY_TWI", + "BOOT_RCVRY_UART", + "", + "", + "", + "", + "", + "PE_SWITCH_RSTB_N"; + }; + + tmp435@4c { + compatible = "ti,tmp435"; + reg = <0x4c>; + }; + + pca9849@75 { + compatible = "nxp,pca849"; + reg = <0x75>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + i2c-mux-idle-disconnect; + + i2c11mux0chn0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + i2c11mux0chn1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + i2c11mux0chn2: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + i2c11mux0chn3: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; +}; + +&i2c12 { + status = "okay"; + + tpm@2e { + compatible = "nuvoton,npct75x"; + reg = <0x2e>; + }; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; +}; + +&i2c13 { + status = "okay"; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + + pca9551@60 { + compatible = "nxp,pca9551"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + led@0 { + label = "nvme0"; + reg = <0>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@1 { + label = "nvme1"; + reg = <1>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@2 { + label = "nvme2"; + reg = <2>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@3 { + label = "nvme3"; + reg = <3>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + }; +}; + +&i2c14 { + status = "okay"; +}; + +&i2c15 { + status = "okay"; +}; + +&vuart1 { + status = "okay"; +}; + +&vuart2 { + status = "okay"; +}; + +&lpc_ctrl { + status = "okay"; + memory-region = <&flash_memory>; +}; + +&mac2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii3_default>; + clocks = <&syscon ASPEED_CLK_GATE_MAC3CLK>, + <&syscon ASPEED_CLK_MAC3RCLK>; + clock-names = "MACCLK", "RCLK"; + use-ncsi; +}; + +&mac3 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii4_default>; + clocks = <&syscon ASPEED_CLK_GATE_MAC4CLK>, + <&syscon ASPEED_CLK_MAC4RCLK>; + clock-names = "MACCLK", "RCLK"; + use-ncsi; +}; + +&wdt1 { + aspeed,reset-type = "none"; + aspeed,external-signal; + aspeed,ext-push-pull; + aspeed,ext-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdtrst1_default>; +}; + +&wdt2 { + status = "okay"; +}; + +&xdma { + status = "okay"; + memory-region = <&vga_memory>; +}; + +&kcs2 { + status = "okay"; + aspeed,lpc-io-reg = <0xca8 0xcac>; +}; + +&kcs3 { + status = "okay"; + aspeed,lpc-io-reg = <0xca2>; + aspeed,lpc-interrupts = <11 IRQ_TYPE_LEVEL_LOW>; +}; diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts index a6a2bc3b855c..1448ea895be4 100644 --- a/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts +++ b/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts @@ -162,16 +162,9 @@ #size-cells = <1>; ranges; - /* LPC FW cycle bridge region requires natural alignment */ - flash_memory: region@b8000000 { - no-map; - reg = <0xb8000000 0x04000000>; /* 64M */ - }; - - /* 48MB region from the end of flash to start of vga memory */ - ramoops@bc000000 { + ramoops@b3e00000 { compatible = "ramoops"; - reg = <0xbc000000 0x200000>; /* 16 * (4 * 0x8000) */ + reg = <0xb3e00000 0x200000>; /* 16 * (4 * 0x8000) */ record-size = <0x8000>; console-size = <0x8000>; ftrace-size = <0x8000>; @@ -179,6 +172,12 @@ max-reason = <3>; /* KMSG_DUMP_EMERG */ }; + /* LPC FW cycle bridge region requires natural alignment */ + flash_memory: region@b4000000 { + no-map; + reg = <0xb4000000 0x04000000>; /* 64M */ + }; + /* VGA region is dictated by hardware strapping */ vga_memory: region@bf000000 { no-map; @@ -2551,6 +2550,11 @@ fsi_occ0: occ { compatible = "ibm,p10-occ"; + + occ-hwmon { + compatible = "ibm,p10-occ-hwmon"; + ibm,no-poll-on-init; + }; }; }; @@ -2695,6 +2699,11 @@ fsi_occ1: occ { compatible = "ibm,p10-occ"; + + occ-hwmon { + compatible = "ibm,p10-occ-hwmon"; + ibm,no-poll-on-init; + }; }; }; @@ -2839,6 +2848,11 @@ fsi_occ2: occ { compatible = "ibm,p10-occ"; + + occ-hwmon { + compatible = "ibm,p10-occ-hwmon"; + ibm,no-poll-on-init; + }; }; }; @@ -2983,6 +2997,11 @@ fsi_occ3: occ { compatible = "ibm,p10-occ"; + + occ-hwmon { + compatible = "ibm,p10-occ-hwmon"; + ibm,no-poll-on-init; + }; }; }; @@ -3127,6 +3146,11 @@ fsi_occ4: occ { compatible = "ibm,p10-occ"; + + occ-hwmon { + compatible = "ibm,p10-occ-hwmon"; + ibm,no-poll-on-init; + }; }; }; @@ -3271,6 +3295,11 @@ fsi_occ5: occ { compatible = "ibm,p10-occ"; + + occ-hwmon { + compatible = "ibm,p10-occ-hwmon"; + ibm,no-poll-on-init; + }; }; }; @@ -3415,6 +3444,11 @@ fsi_occ6: occ { compatible = "ibm,p10-occ"; + + occ-hwmon { + compatible = "ibm,p10-occ-hwmon"; + ibm,no-poll-on-init; + }; }; }; @@ -3559,6 +3593,11 @@ fsi_occ7: occ { compatible = "ibm,p10-occ"; + + occ-hwmon { + compatible = "ibm,p10-occ-hwmon"; + ibm,no-poll-on-init; + }; }; }; diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts index bf59a9962379..20ef958698ec 100644 --- a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts +++ b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts @@ -95,14 +95,9 @@ #size-cells = <1>; ranges; - flash_memory: region@b8000000 { - no-map; - reg = <0xb8000000 0x04000000>; /* 64M */ - }; - - ramoops@bc000000 { + ramoops@b3e00000 { compatible = "ramoops"; - reg = <0xbc000000 0x200000>; /* 16 * (4 * 0x8000) */ + reg = <0xb3e00000 0x200000>; /* 16 * (4 * 0x8000) */ record-size = <0x8000>; console-size = <0x8000>; ftrace-size = <0x8000>; @@ -110,6 +105,13 @@ max-reason = <3>; /* KMSG_DUMP_EMERG */ }; + /* LPC FW cycle bridge region requires natural alignment */ + flash_memory: region@b4000000 { + no-map; + reg = <0xb4000000 0x04000000>; /* 64M */ + }; + + /* VGA region is dictated by hardware strapping */ vga_memory: region@bf000000 { no-map; compatible = "shared-dma-pool"; @@ -442,6 +444,11 @@ fsi_occ0: occ { compatible = "ibm,p10-occ"; + + occ-hwmon { + compatible = "ibm,p10-occ-hwmon"; + ibm,no-poll-on-init; + }; }; }; @@ -586,6 +593,11 @@ fsi_occ1: occ { compatible = "ibm,p10-occ"; + + occ-hwmon { + compatible = "ibm,p10-occ-hwmon"; + ibm,no-poll-on-init; + }; }; }; @@ -730,6 +742,11 @@ fsi_occ2: occ { compatible = "ibm,p10-occ"; + + occ-hwmon { + compatible = "ibm,p10-occ-hwmon"; + ibm,no-poll-on-init; + }; }; }; @@ -874,6 +891,11 @@ fsi_occ3: occ { compatible = "ibm,p10-occ"; + + occ-hwmon { + compatible = "ibm,p10-occ-hwmon"; + ibm,no-poll-on-init; + }; }; }; @@ -995,32 +1017,6 @@ reg = <0x4a>; }; - pca9551@60 { - compatible = "nxp,pca9551"; - reg = <0x60>; - #address-cells = <1>; - #size-cells = <0>; - - gpio-controller; - #gpio-cells = <2>; - - led@0 { - label = "cablecard0-cxp-top"; - reg = <0>; - retain-state-shutdown; - default-state = "keep"; - type = <PCA955X_TYPE_LED>; - }; - - led@1 { - label = "cablecard0-cxp-bot"; - reg = <1>; - retain-state-shutdown; - default-state = "keep"; - type = <PCA955X_TYPE_LED>; - }; - }; - pca9546@70 { compatible = "nxp,pca9546"; reg = <0x70>; @@ -1038,6 +1034,32 @@ compatible = "atmel,24c64"; reg = <0x50>; }; + + pca9551@60 { + compatible = "nxp,pca9551"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + led@0 { + label = "cablecard0-cxp-top"; + reg = <0>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@1 { + label = "cablecard0-cxp-bot"; + reg = <1>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + }; }; i2c4mux0chn1: i2c@1 { @@ -1077,58 +1099,6 @@ reg = <0x49>; }; - pca9551@60 { - compatible = "nxp,pca9551"; - reg = <0x60>; - #address-cells = <1>; - #size-cells = <0>; - - gpio-controller; - #gpio-cells = <2>; - - led@0 { - label = "cablecard3-cxp-top"; - reg = <0>; - retain-state-shutdown; - default-state = "keep"; - type = <PCA955X_TYPE_LED>; - }; - - led@1 { - label = "cablecard3-cxp-bot"; - reg = <1>; - retain-state-shutdown; - default-state = "keep"; - type = <PCA955X_TYPE_LED>; - }; - }; - - pca9551@61 { - compatible = "nxp,pca9551"; - reg = <0x61>; - #address-cells = <1>; - #size-cells = <0>; - - gpio-controller; - #gpio-cells = <2>; - - led@0 { - label = "cablecard4-cxp-top"; - reg = <0>; - retain-state-shutdown; - default-state = "keep"; - type = <PCA955X_TYPE_LED>; - }; - - led@1 { - label = "cablecard4-cxp-bot"; - reg = <1>; - retain-state-shutdown; - default-state = "keep"; - type = <PCA955X_TYPE_LED>; - }; - }; - pca9546@70 { compatible = "nxp,pca9546"; reg = <0x70>; @@ -1146,6 +1116,32 @@ compatible = "atmel,24c64"; reg = <0x50>; }; + + pca9551@60 { + compatible = "nxp,pca9551"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + led@0 { + label = "cablecard3-cxp-top"; + reg = <0>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@1 { + label = "cablecard3-cxp-bot"; + reg = <1>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + }; }; i2c5mux0chn1: i2c@1 { @@ -1157,6 +1153,32 @@ compatible = "atmel,24c64"; reg = <0x51>; }; + + pca9551@61 { + compatible = "nxp,pca9551"; + reg = <0x61>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + led@0 { + label = "cablecard4-cxp-top"; + reg = <0>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@1 { + label = "cablecard4-cxp-bot"; + reg = <1>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + }; }; }; }; @@ -2009,32 +2031,6 @@ reg = <0x49>; }; - pca9551@60 { - compatible = "nxp,pca9551"; - reg = <0x60>; - #address-cells = <1>; - #size-cells = <0>; - - gpio-controller; - #gpio-cells = <2>; - - led@0 { - label = "cablecard10-cxp-top"; - reg = <0>; - retain-state-shutdown; - default-state = "keep"; - type = <PCA955X_TYPE_LED>; - }; - - led@1 { - label = "cablecard10-cxp-bot"; - reg = <1>; - retain-state-shutdown; - default-state = "keep"; - type = <PCA955X_TYPE_LED>; - }; - }; - pca9546@70 { compatible = "nxp,pca9546"; reg = <0x70>; @@ -2052,6 +2048,32 @@ compatible = "atmel,24c64"; reg = <0x50>; }; + + pca9551@60 { + compatible = "nxp,pca9551"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + led@0 { + label = "cablecard10-cxp-top"; + reg = <0>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@1 { + label = "cablecard10-cxp-bot"; + reg = <1>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + }; }; i2c11mux0chn1: i2c@1 { diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts b/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts deleted file mode 100644 index 48776fb663fb..000000000000 --- a/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts +++ /dev/null @@ -1,1381 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/dts-v1/; -#include "aspeed-g5.dtsi" -#include <dt-bindings/gpio/aspeed-gpio.h> -#include <dt-bindings/leds/leds-pca955x.h> - -/ { - model = "Mihawk BMC"; - compatible = "ibm,mihawk-bmc", "aspeed,ast2500"; - - aliases { - i2c215 = &bus6_mux215; - i2c216 = &bus6_mux216; - i2c217 = &bus6_mux217; - i2c218 = &bus6_mux218; - i2c219 = &bus6_mux219; - i2c220 = &bus6_mux220; - i2c221 = &bus6_mux221; - i2c222 = &bus6_mux222; - i2c223 = &bus7_mux223; - i2c224 = &bus7_mux224; - i2c225 = &bus7_mux225; - i2c226 = &bus7_mux226; - i2c227 = &bus7_mux227; - i2c228 = &bus7_mux228; - i2c229 = &bus7_mux229; - i2c230 = &bus7_mux230; - i2c231 = &bus9_mux231; - i2c232 = &bus9_mux232; - i2c233 = &bus9_mux233; - i2c234 = &bus9_mux234; - i2c235 = &bus9_mux235; - i2c236 = &bus9_mux236; - i2c237 = &bus9_mux237; - i2c238 = &bus9_mux238; - i2c239 = &bus10_mux239; - i2c240 = &bus10_mux240; - i2c241 = &bus10_mux241; - i2c242 = &bus10_mux242; - i2c243 = &bus10_mux243; - i2c244 = &bus10_mux244; - i2c245 = &bus10_mux245; - i2c246 = &bus10_mux246; - i2c247 = &bus12_mux247; - i2c248 = &bus12_mux248; - i2c249 = &bus12_mux249; - i2c250 = &bus12_mux250; - i2c251 = &bus13_mux251; - i2c252 = &bus13_mux252; - i2c253 = &bus13_mux253; - i2c254 = &bus13_mux254; - i2c255 = &bus13_mux255; - i2c256 = &bus13_mux256; - i2c257 = &bus13_mux257; - i2c258 = &bus13_mux258; - }; - - chosen { - stdout-path = &uart5; - bootargs = "console=ttyS4,115200 earlycon"; - }; - - memory@80000000 { - reg = <0x80000000 0x20000000>; - }; - - reserved-memory { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - flash_memory: region@98000000 { - no-map; - reg = <0x98000000 0x04000000>; /* 64M */ - }; - - gfx_memory: framebuffer { - size = <0x01000000>; - alignment = <0x01000000>; - compatible = "shared-dma-pool"; - reusable; - }; - - video_engine_memory: jpegbuffer { - size = <0x02000000>; - alignment = <0x01000000>; - compatible = "shared-dma-pool"; - reusable; - }; - }; - - gpio-keys { - compatible = "gpio-keys"; - - event-air-water { - label = "air-water"; - gpios = <&gpio ASPEED_GPIO(F, 6) GPIO_ACTIVE_LOW>; - linux,code = <ASPEED_GPIO(F, 6)>; - }; - - event-checkstop { - label = "checkstop"; - gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>; - linux,code = <ASPEED_GPIO(J, 2)>; - }; - - event-ps0-presence { - label = "ps0-presence"; - gpios = <&gpio ASPEED_GPIO(Z, 2) GPIO_ACTIVE_LOW>; - linux,code = <ASPEED_GPIO(Z, 2)>; - }; - - event-ps1-presence { - label = "ps1-presence"; - gpios = <&gpio ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>; - linux,code = <ASPEED_GPIO(Z, 0)>; - }; - - button-id { - label = "id-button"; - gpios = <&gpio ASPEED_GPIO(F, 1) GPIO_ACTIVE_LOW>; - linux,code = <ASPEED_GPIO(F, 1)>; - }; - }; - - gpio-keys-polled { - compatible = "gpio-keys-polled"; - poll-interval = <1000>; - - event-fan0-presence { - label = "fan0-presence"; - gpios = <&pca9552 9 GPIO_ACTIVE_LOW>; - linux,code = <9>; - }; - - event-fan1-presence { - label = "fan1-presence"; - gpios = <&pca9552 10 GPIO_ACTIVE_LOW>; - linux,code = <10>; - }; - - event-fan2-presence { - label = "fan2-presence"; - gpios = <&pca9552 11 GPIO_ACTIVE_LOW>; - linux,code = <11>; - }; - - event-fan3-presence { - label = "fan3-presence"; - gpios = <&pca9552 12 GPIO_ACTIVE_LOW>; - linux,code = <12>; - }; - - event-fan4-presence { - label = "fan4-presence"; - gpios = <&pca9552 13 GPIO_ACTIVE_LOW>; - linux,code = <13>; - }; - - event-fan5-presence { - label = "fan5-presence"; - gpios = <&pca9552 14 GPIO_ACTIVE_LOW>; - linux,code = <14>; - }; - }; - - leds { - compatible = "gpio-leds"; - - front-fault { - retain-state-shutdown; - default-state = "keep"; - gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_LOW>; - }; - - power-button { - retain-state-shutdown; - default-state = "keep"; - gpios = <&gpio ASPEED_GPIO(AA, 1) GPIO_ACTIVE_LOW>; - }; - - front-id { - retain-state-shutdown; - default-state = "keep"; - gpios = <&gpio ASPEED_GPIO(AA, 2) GPIO_ACTIVE_LOW>; - }; - - - fan0 { - retain-state-shutdown; - default-state = "keep"; - gpios = <&pca9552 0 GPIO_ACTIVE_LOW>; - }; - - fan1 { - retain-state-shutdown; - default-state = "keep"; - gpios = <&pca9552 1 GPIO_ACTIVE_LOW>; - }; - - fan2 { - retain-state-shutdown; - default-state = "keep"; - gpios = <&pca9552 2 GPIO_ACTIVE_LOW>; - }; - - fan3 { - retain-state-shutdown; - default-state = "keep"; - gpios = <&pca9552 3 GPIO_ACTIVE_LOW>; - }; - - fan4 { - retain-state-shutdown; - default-state = "keep"; - gpios = <&pca9552 4 GPIO_ACTIVE_LOW>; - }; - - fan5 { - retain-state-shutdown; - default-state = "keep"; - gpios = <&pca9552 5 GPIO_ACTIVE_LOW>; - }; - }; - - fsi: gpio-fsi { - compatible = "fsi-master-gpio", "fsi-master"; - #address-cells = <2>; - #size-cells = <0>; - no-gpio-delays; - - clock-gpios = <&gpio ASPEED_GPIO(E, 6) GPIO_ACTIVE_HIGH>; - data-gpios = <&gpio ASPEED_GPIO(E, 7) GPIO_ACTIVE_HIGH>; - mux-gpios = <&gpio ASPEED_GPIO(E, 5) GPIO_ACTIVE_HIGH>; - enable-gpios = <&gpio ASPEED_GPIO(D, 0) GPIO_ACTIVE_HIGH>; - trans-gpios = <&gpio ASPEED_GPIO(R, 2) GPIO_ACTIVE_HIGH>; - }; - iio-hwmon-12v { - compatible = "iio-hwmon"; - io-channels = <&adc 0>; - }; - - iio-hwmon-5v { - compatible = "iio-hwmon"; - io-channels = <&adc 1>; - }; - - iio-hwmon-3v { - compatible = "iio-hwmon"; - io-channels = <&adc 2>; - }; - - iio-hwmon-vdd0 { - compatible = "iio-hwmon"; - io-channels = <&adc 3>; - }; - - iio-hwmon-vdd1 { - compatible = "iio-hwmon"; - io-channels = <&adc 4>; - }; - - iio-hwmon-vcs0 { - compatible = "iio-hwmon"; - io-channels = <&adc 5>; - }; - - iio-hwmon-vcs1 { - compatible = "iio-hwmon"; - io-channels = <&adc 6>; - }; - - iio-hwmon-vdn0 { - compatible = "iio-hwmon"; - io-channels = <&adc 7>; - }; - - iio-hwmon-vdn1 { - compatible = "iio-hwmon"; - io-channels = <&adc 8>; - }; - - iio-hwmon-vio0 { - compatible = "iio-hwmon"; - io-channels = <&adc 9>; - }; - - iio-hwmon-vio1 { - compatible = "iio-hwmon"; - io-channels = <&adc 10>; - }; - - iio-hwmon-vddra { - compatible = "iio-hwmon"; - io-channels = <&adc 11>; - }; - - iio-hwmon-battery { - compatible = "iio-hwmon"; - io-channels = <&adc 12>; - }; - - iio-hwmon-vddrb { - compatible = "iio-hwmon"; - io-channels = <&adc 13>; - }; - - iio-hwmon-vddrc { - compatible = "iio-hwmon"; - io-channels = <&adc 14>; - }; - - iio-hwmon-vddrd { - compatible = "iio-hwmon"; - io-channels = <&adc 15>; - }; -}; - -&pwm_tacho { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default - &pinctrl_pwm2_default &pinctrl_pwm3_default - &pinctrl_pwm4_default &pinctrl_pwm5_default>; - - fan@0 { - reg = <0x00>; - aspeed,fan-tach-ch = /bits/ 8 <0x00>; - }; - - fan@1 { - reg = <0x01>; - aspeed,fan-tach-ch = /bits/ 8 <0x01>; - }; - - fan@2 { - reg = <0x02>; - aspeed,fan-tach-ch = /bits/ 8 <0x02>; - }; - - fan@3 { - reg = <0x03>; - aspeed,fan-tach-ch = /bits/ 8 <0x03>; - }; - - fan@4 { - reg = <0x04>; - aspeed,fan-tach-ch = /bits/ 8 <0x04>; - }; - - fan@5 { - reg = <0x05>; - aspeed,fan-tach-ch = /bits/ 8 <0x05>; - }; - - fan@6 { - reg = <0x00>; - aspeed,fan-tach-ch = /bits/ 8 <0x06>; - }; - - fan@7 { - reg = <0x01>; - aspeed,fan-tach-ch = /bits/ 8 <0x07>; - }; - - fan@8 { - reg = <0x02>; - aspeed,fan-tach-ch = /bits/ 8 <0x08>; - }; - - fan@9 { - reg = <0x03>; - aspeed,fan-tach-ch = /bits/ 8 <0x09>; - }; - - fan@10 { - reg = <0x04>; - aspeed,fan-tach-ch = /bits/ 8 <0x0a>; - }; - - fan@11 { - reg = <0x05>; - aspeed,fan-tach-ch = /bits/ 8 <0x0b>; - }; -}; - -&gpio { - gpio-line-names = - /*A0-A7*/ "","cfam-reset","","","","","","", - /*B0-B7*/ "","","","","","","","", - /*C0-C7*/ "","","","","","","","", - /*D0-D7*/ "fsi-enable","","","","","","","", - /*E0-E7*/ "","","","","","fsi-mux","fsi-clock","fsi-data", - /*F0-F7*/ "","id-button","","","","","air-water","", - /*G0-G7*/ "","","","","","","","", - /*H0-H7*/ "","","","","","","","", - /*I0-I7*/ "","","","","","","","", - /*J0-J7*/ "","","checkstop","","","","","", - /*K0-K7*/ "","","","","","","","", - /*L0-L7*/ "","","","","","","","", - /*M0-M7*/ "","","","","","","","", - /*N0-N7*/ "","","","","","","","", - /*O0-O7*/ "","","","","","","","", - /*P0-P7*/ "","","","","","","","", - /*Q0-Q7*/ "","","","","","","","", - /*R0-R7*/ "","","fsi-trans","","","","","", - /*S0-S7*/ "","","","","","","","", - /*T0-T7*/ "","","","","","","","", - /*U0-U7*/ "","","","","","","","", - /*V0-V7*/ "","","","","","","","", - /*W0-W7*/ "","","","","","","","", - /*X0-X7*/ "","","","","","","","", - /*Y0-Y7*/ "","","","","","","","", - /*Z0-Z7*/ "presence-ps1","","presence-ps0","","","","","", - /*AA0-AA7*/ "led-front-fault","power-button","led-front-id","","","","","", - /*AB0-AB7*/ "","","","","","","","", - /*AC0-AC7*/ "","","","","","","",""; -}; - -&fmc { - status = "okay"; - flash@0 { - status = "okay"; - label = "bmc"; - m25p,fast-read; - spi-max-frequency = <50000000>; - partitions { - #address-cells = < 1 >; - #size-cells = < 1 >; - compatible = "fixed-partitions"; - u-boot@0 { - reg = < 0 0x60000 >; - label = "u-boot"; - }; - u-boot-env@60000 { - reg = < 0x60000 0x20000 >; - label = "u-boot-env"; - }; - obmc-ubi@80000 { - reg = < 0x80000 0x1F80000 >; - label = "obmc-ubi"; - }; - }; - }; - flash@1 { - status = "okay"; - label = "alt-bmc"; - m25p,fast-read; - spi-max-frequency = <50000000>; - partitions { - #address-cells = < 1 >; - #size-cells = < 1 >; - compatible = "fixed-partitions"; - u-boot@0 { - reg = < 0 0x60000 >; - label = "alt-u-boot"; - }; - u-boot-env@60000 { - reg = < 0x60000 0x20000 >; - label = "alt-u-boot-env"; - }; - obmc-ubi@80000 { - reg = < 0x80000 0x1F80000 >; - label = "alt-obmc-ubi"; - }; - }; - }; -}; - -&spi1 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_spi1_default>; - - flash@0 { - status = "okay"; - label = "pnor"; - m25p,fast-read; - spi-max-frequency = <100000000>; - }; -}; - -&lpc_ctrl { - status = "okay"; - memory-region = <&flash_memory>; - flash = <&spi1>; -}; - -&uart1 { - /* Rear RS-232 connector */ - status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_txd1_default - &pinctrl_rxd1_default - &pinctrl_nrts1_default - &pinctrl_ndtr1_default - &pinctrl_ndsr1_default - &pinctrl_ncts1_default - &pinctrl_ndcd1_default - &pinctrl_nri1_default>; -}; - -&uart2 { - /* APSS */ - status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_txd2_default &pinctrl_rxd2_default>; -}; - -&uart5 { - status = "okay"; -}; - -&mac0 { - status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_rmii1_default>; - clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>, - <&syscon ASPEED_CLK_MAC1RCLK>; - clock-names = "MACCLK", "RCLK"; - use-ncsi; -}; - -&mac1 { - status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>; -}; - -&i2c0 { - status = "disabled"; -}; - -&i2c1 { - status = "disabled"; -}; - -&i2c2 { - status = "okay"; - - /* SAMTEC P0 */ - /* SAMTEC P1 */ - -}; - -&i2c3 { - status = "okay"; - - /* APSS */ - /* CPLD */ - - /* PCA9516 (repeater) -> - * CLK Buffer 9FGS9092 - * CLK Buffer 9DBL0651BKILFT - * CLK Buffer 9DBL0651BKILFT - * Power Supply 0 - * Power Supply 1 - * PCA 9552 LED - */ - - power-supply@58 { - compatible = "ibm,cffps1"; - reg = <0x58>; - }; - - power-supply@5b { - compatible = "ibm,cffps1"; - reg = <0x5b>; - }; - - pca9552: pca9552@60 { - compatible = "nxp,pca9552"; - reg = <0x60>; - #address-cells = <1>; - #size-cells = <0>; - gpio-controller; - #gpio-cells = <2>; - - gpio@0 { - reg = <0>; - type = <PCA955X_TYPE_GPIO>; - }; - gpio@1 { - reg = <1>; - type = <PCA955X_TYPE_GPIO>; - }; - gpio@2 { - reg = <2>; - type = <PCA955X_TYPE_GPIO>; - }; - gpio@3 { - reg = <3>; - type = <PCA955X_TYPE_GPIO>; - }; - gpio@4 { - reg = <4>; - type = <PCA955X_TYPE_GPIO>; - }; - gpio@5 { - reg = <5>; - type = <PCA955X_TYPE_GPIO>; - }; - gpio@6 { - reg = <6>; - type = <PCA955X_TYPE_GPIO>; - }; - gpio@7 { - reg = <7>; - type = <PCA955X_TYPE_GPIO>; - }; - gpio@8 { - reg = <8>; - type = <PCA955X_TYPE_GPIO>; - }; - gpio@9 { - reg = <9>; - type = <PCA955X_TYPE_GPIO>; - }; - gpio@10 { - reg = <10>; - type = <PCA955X_TYPE_GPIO>; - }; - gpio@11 { - reg = <11>; - type = <PCA955X_TYPE_GPIO>; - }; - gpio@12 { - reg = <12>; - type = <PCA955X_TYPE_GPIO>; - }; - gpio@13 { - reg = <13>; - type = <PCA955X_TYPE_GPIO>; - }; - gpio@14 { - reg = <14>; - type = <PCA955X_TYPE_GPIO>; - }; - gpio@15 { - reg = <15>; - type = <PCA955X_TYPE_GPIO>; - }; - - }; - -}; - -&i2c4 { - status = "okay"; - - /* CP0 VDD & VCS : IR35221 */ - /* CP0 VDN : IR35221 */ - /* CP0 VIO : IR38064 */ - /* CP0 VDDR : PXM1330 */ - - ir35221@70 { - compatible = "infineon,ir35221"; - reg = <0x70>; - }; - - ir35221@72 { - compatible = "infineon,ir35221"; - reg = <0x72>; - }; - -}; - -&i2c5 { - status = "okay"; - - /* CP0 VDD & VCS : IR35221 */ - /* CP0 VDN : IR35221 */ - /* CP0 VIO : IR38064 */ - /* CP0 VDDR : PXM1330 */ - - ir35221@70 { - compatible = "infineon,ir35221"; - reg = <0x70>; - }; - - ir35221@72 { - compatible = "infineon,ir35221"; - reg = <0x72>; - }; - -}; - -&i2c6 { - status = "okay"; - - /* pca9548 -> NVMe1 to 8 */ - - pca9548@70 { - compatible = "nxp,pca9548"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x70>; - - bus7_mux223: i2c@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - }; - - bus7_mux224: i2c@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - }; - - bus7_mux225: i2c@2 { - #address-cells = <1>; - #size-cells = <0>; - reg = <2>; - }; - - bus7_mux226: i2c@3 { - #address-cells = <1>; - #size-cells = <0>; - reg = <3>; - }; - - bus7_mux227: i2c@4 { - #address-cells = <1>; - #size-cells = <0>; - reg = <4>; - }; - - bus7_mux228: i2c@5 { - #address-cells = <1>; - #size-cells = <0>; - reg = <5>; - }; - - bus7_mux229: i2c@6 { - #address-cells = <1>; - #size-cells = <0>; - reg = <6>; - }; - - bus7_mux230: i2c@7 { - #address-cells = <1>; - #size-cells = <0>; - reg = <7>; - }; - }; - -}; - -&i2c7 { - status = "okay"; - - /* pca9548 -> NVMe9 to 16 */ - - pca9548@70 { - compatible = "nxp,pca9548"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x70>; - - bus6_mux215: i2c@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - }; - - bus6_mux216: i2c@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - }; - - bus6_mux217: i2c@2 { - #address-cells = <1>; - #size-cells = <0>; - reg = <2>; - }; - - bus6_mux218: i2c@3 { - #address-cells = <1>; - #size-cells = <0>; - reg = <3>; - }; - - bus6_mux219: i2c@4 { - #address-cells = <1>; - #size-cells = <0>; - reg = <4>; - }; - - bus6_mux220: i2c@5 { - #address-cells = <1>; - #size-cells = <0>; - reg = <5>; - }; - - bus6_mux221: i2c@6 { - #address-cells = <1>; - #size-cells = <0>; - reg = <6>; - }; - - bus6_mux222: i2c@7 { - #address-cells = <1>; - #size-cells = <0>; - reg = <7>; - }; - }; - -}; - -&i2c8 { - status = "okay"; - - eeprom@50 { - compatible = "atmel,24c64"; - reg = <0x50>; - }; -}; - -&i2c9 { - status = "okay"; - - /* pca9545 Riser -> - * PCIe x8 Slot3 - * PCIe x16 slot4 - * PCIe x8 slot5 - * I2C BMC RISER PCA9554 - * BMC SCL/SDA PCA9554 - * PCA9554 - */ - - /* pca9545 -> - * PCIe x16 Slot1 - * PCIe x8 slot2 - * PEX8748 - */ - - pca9545riser@70 { - compatible = "nxp,pca9545"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x70>; - - i2c-mux-idle-disconnect; - interrupt-controller; - #interrupt-cells = <2>; - - bus9_mux231: i2c@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - - tca9554@39 { - compatible = "ti,tca9554"; - reg = <0x39>; - gpio-controller; - #gpio-cells = <2>; - - smbus0-hog { - gpio-hog; - gpios = <4 GPIO_ACTIVE_HIGH>; - output-high; - line-name = "smbus0"; - }; - }; - - tmp431@4c { - compatible = "ti,tmp401"; - reg = <0x4c>; - }; - }; - - bus9_mux232: i2c@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - - tca9554@39 { - compatible = "ti,tca9554"; - reg = <0x39>; - gpio-controller; - #gpio-cells = <2>; - - smbus1-hog { - gpio-hog; - gpios = <4 GPIO_ACTIVE_HIGH>; - output-high; - line-name = "smbus1"; - }; - }; - - tmp431@4c { - compatible = "ti,tmp401"; - reg = <0x4c>; - }; - }; - - bus9_mux233: i2c@2 { - #address-cells = <1>; - #size-cells = <0>; - reg = <2>; - }; - - bus9_mux234: i2c@3 { - #address-cells = <1>; - #size-cells = <0>; - reg = <3>; - }; - }; - - pca9545@71 { - compatible = "nxp,pca9545"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x71>; - - i2c-mux-idle-disconnect; - interrupt-controller; - #interrupt-cells = <2>; - - bus9_mux235: i2c@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - - tca9554@39 { - compatible = "ti,tca9554"; - reg = <0x39>; - gpio-controller; - #gpio-cells = <2>; - - smbus2-hog { - gpio-hog; - gpios = <4 GPIO_ACTIVE_HIGH>; - output-high; - line-name = "smbus2"; - }; - }; - - tmp431@4c { - compatible = "ti,tmp401"; - reg = <0x4c>; - }; - }; - - bus9_mux236: i2c@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - - tca9554@39 { - compatible = "ti,tca9554"; - reg = <0x39>; - gpio-controller; - #gpio-cells = <2>; - - smbus3-hog { - gpio-hog; - gpios = <4 GPIO_ACTIVE_HIGH>; - output-high; - line-name = "smbus3"; - }; - }; - - tmp431@4c { - compatible = "ti,tmp401"; - reg = <0x4c>; - }; - }; - - bus9_mux237: i2c@2 { - #address-cells = <1>; - #size-cells = <0>; - reg = <2>; - }; - - bus9_mux238: i2c@3 { - #address-cells = <1>; - #size-cells = <0>; - reg = <3>; - }; - }; -}; - -&i2c10 { - status = "okay"; - - /* pca9545 Riser -> - * PCIe x8 Slot8 - * PCIe x16 slot9 - * PCIe x8 slot10 - * I2C BMC RISER PCA9554 - * BMC SCL/SDA PCA9554 - * PCA9554 - */ - - /* pca9545 -> - * PCIe x16 Slot1 - * PCIe x8 slot2 - * PEX8748 - */ - - pca9545riser@70 { - compatible = "nxp,pca9545"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x70>; - - i2c-mux-idle-disconnect; - interrupt-controller; - #interrupt-cells = <2>; - - bus10_mux239: i2c@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - - tca9554@39 { - compatible = "ti,tca9554"; - reg = <0x39>; - gpio-controller; - #gpio-cells = <2>; - - smbus4-hog { - gpio-hog; - gpios = <4 GPIO_ACTIVE_HIGH>; - output-high; - line-name = "smbus4"; - }; - }; - - tmp431@4c { - compatible = "ti,tmp401"; - reg = <0x4c>; - }; - }; - - bus10_mux240: i2c@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - - tca9554@39 { - compatible = "ti,tca9554"; - reg = <0x39>; - gpio-controller; - #gpio-cells = <2>; - - smbus5-hog { - gpio-hog; - gpios = <4 GPIO_ACTIVE_HIGH>; - output-high; - line-name = "smbus5"; - }; - }; - - tmp431@4c { - compatible = "ti,tmp401"; - reg = <0x4c>; - }; - }; - - bus10_mux241: i2c@2 { - #address-cells = <1>; - #size-cells = <0>; - reg = <2>; - }; - - bus10_mux242: i2c@3 { - #address-cells = <1>; - #size-cells = <0>; - reg = <3>; - }; - }; - - pca9545@71 { - compatible = "nxp,pca9545"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x71>; - - i2c-mux-idle-disconnect; - interrupt-controller; - #interrupt-cells = <2>; - - bus10_mux243: i2c@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - - tca9554@39 { - compatible = "ti,tca9554"; - reg = <0x39>; - gpio-controller; - #gpio-cells = <2>; - - smbus6-hog { - gpio-hog; - gpios = <4 GPIO_ACTIVE_HIGH>; - output-high; - line-name = "smbus6"; - }; - }; - - tmp431@4c { - compatible = "ti,tmp401"; - reg = <0x4c>; - }; - }; - - bus10_mux244: i2c@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - - tca9554@39 { - compatible = "ti,tca9554"; - reg = <0x39>; - gpio-controller; - #gpio-cells = <2>; - - smbus7-hog { - gpio-hog; - gpios = <4 GPIO_ACTIVE_HIGH>; - output-high; - line-name = "smbus7"; - }; - }; - - tmp431@4c { - compatible = "ti,tmp401"; - reg = <0x4c>; - }; - }; - - bus10_mux245: i2c@2 { - #address-cells = <1>; - #size-cells = <0>; - reg = <2>; - }; - - bus10_mux246: i2c@3 { - #address-cells = <1>; - #size-cells = <0>; - reg = <3>; - }; - }; -}; - -&i2c11 { - status = "okay"; - - /* TPM */ - /* RTC RX8900CE */ - /* FPGA for power sequence */ - /* TMP275A */ - /* TMP275A */ - /* EMC1462 */ - - tpm@57 { - compatible = "infineon,slb9645tt"; - reg = <0x57>; - }; - - rtc@32 { - compatible = "epson,rx8900"; - reg = <0x32>; - }; - - tmp275@48 { - compatible = "ti,tmp275"; - reg = <0x48>; - }; - - tmp275@49 { - compatible = "ti,tmp275"; - reg = <0x49>; - }; - - /* chip emc1462 use emc1403 driver */ - emc1403@4c { - compatible = "smsc,emc1403"; - reg = <0x4c>; - }; - -}; - -&i2c12 { - status = "okay"; - - /* pca9545 -> - * SAS BP1 - * SAS BP2 - * NVMe BP - * M.2 riser - */ - - pca9545@70 { - compatible = "nxp,pca9545"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x70>; - - interrupt-controller; - #interrupt-cells = <2>; - - bus12_mux247: i2c@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - - eeprom@50 { - compatible = "atmel,24c64"; - reg = <0x50>; - }; - }; - - bus12_mux248: i2c@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - - eeprom@50 { - compatible = "atmel,24c64"; - reg = <0x50>; - }; - }; - - bus12_mux249: i2c@2 { - #address-cells = <1>; - #size-cells = <0>; - reg = <2>; - - eeprom@50 { - compatible = "atmel,24c64"; - reg = <0x50>; - }; - }; - - bus12_mux250: i2c@3 { - #address-cells = <1>; - #size-cells = <0>; - reg = <3>; - - tmp275@48 { - compatible = "ti,tmp275"; - reg = <0x48>; - }; - }; - - }; - -}; - -&i2c13 { - status = "okay"; - - /* pca9548 -> - * NVMe BP - * NVMe HDD17 to 24 - */ - - pca9548@70 { - compatible = "nxp,pca9548"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x70>; - bus13_mux251: i2c@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - }; - - bus13_mux252: i2c@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - }; - - bus13_mux253: i2c@2 { - #address-cells = <1>; - #size-cells = <0>; - reg = <2>; - }; - - bus13_mux254: i2c@3 { - #address-cells = <1>; - #size-cells = <0>; - reg = <3>; - }; - - bus13_mux255: i2c@4 { - #address-cells = <1>; - #size-cells = <0>; - reg = <4>; - }; - - bus13_mux256: i2c@5 { - #address-cells = <1>; - #size-cells = <0>; - reg = <5>; - }; - - bus13_mux257: i2c@6 { - #address-cells = <1>; - #size-cells = <0>; - reg = <6>; - }; - - bus13_mux258: i2c@7 { - #address-cells = <1>; - #size-cells = <0>; - reg = <7>; - }; - }; -}; - -&vuart { - status = "okay"; -}; - -&gfx { - status = "okay"; - memory-region = <&gfx_memory>; -}; - -&adc { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_adc0_default - &pinctrl_adc1_default - &pinctrl_adc2_default - &pinctrl_adc3_default - &pinctrl_adc4_default - &pinctrl_adc5_default - &pinctrl_adc6_default - &pinctrl_adc7_default - &pinctrl_adc8_default - &pinctrl_adc9_default - &pinctrl_adc10_default - &pinctrl_adc11_default - &pinctrl_adc12_default - &pinctrl_adc13_default - &pinctrl_adc14_default - &pinctrl_adc15_default>; -}; - -&wdt1 { - aspeed,reset-type = "none"; - aspeed,external-signal; - aspeed,ext-push-pull; - aspeed,ext-active-high; - - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_wdtrst1_default>; -}; - -&wdt2 { - aspeed,alt-boot; -}; - -&ibt { - status = "okay"; -}; - -&vhub { - status = "okay"; -}; - -&video { - status = "okay"; - memory-region = <&video_engine_memory>; -}; - -#include "ibm-power9-dual.dtsi" - diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed-g6.dtsi index ebbcfe445d9c..cc2f8b785917 100644 --- a/arch/arm/boot/dts/aspeed-g6.dtsi +++ b/arch/arm/boot/dts/aspeed-g6.dtsi @@ -36,6 +36,10 @@ serial4 = &uart5; serial5 = &vuart1; serial6 = &vuart2; + mdio0 = &mdio0; + mdio1 = &mdio1; + mdio2 = &mdio2; + mdio3 = &mdio3; }; diff --git a/arch/arm/boot/dts/ast2600-facebook-netbmc-common.dtsi b/arch/arm/boot/dts/ast2600-facebook-netbmc-common.dtsi index 051de5bec345..31590d3186a2 100644 --- a/arch/arm/boot/dts/ast2600-facebook-netbmc-common.dtsi +++ b/arch/arm/boot/dts/ast2600-facebook-netbmc-common.dtsi @@ -25,7 +25,7 @@ * full-duplex SPI transactions are not supported by ASPEED SPI * Controllers. */ - spi_gpio: spi-gpio { + spi_gpio: spi { status = "okay"; compatible = "spi-gpio"; #address-cells = <1>; diff --git a/arch/arm/boot/dts/at91-sam9x60ek.dts b/arch/arm/boot/dts/at91-sam9x60ek.dts index 4ba52ba11dc6..d929c1ba5789 100644 --- a/arch/arm/boot/dts/at91-sam9x60ek.dts +++ b/arch/arm/boot/dts/at91-sam9x60ek.dts @@ -76,7 +76,6 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; - status = "okay"; }; vdd_1v15: fixed-regulator-vdd_1v15 { @@ -85,7 +84,6 @@ regulator-min-microvolt = <1150000>; regulator-max-microvolt = <1150000>; regulator-always-on; - status = "okay"; }; vdd1_3v3: fixed-regulator-vdd1_3v3 { @@ -94,7 +92,6 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on; - status = "okay"; }; vdd2_3v3: regulator-fixed-vdd2_3v3 { @@ -103,7 +100,6 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on; - status = "okay"; }; }; diff --git a/arch/arm/boot/dts/at91-sama7g5ek.dts b/arch/arm/boot/dts/at91-sama7g5ek.dts index 3b25c67795dd..aa5cc0e98bba 100644 --- a/arch/arm/boot/dts/at91-sama7g5ek.dts +++ b/arch/arm/boot/dts/at91-sama7g5ek.dts @@ -764,8 +764,9 @@ &sdmmc0 { bus-width = <8>; non-removable; - no-1-8-v; sdhci-caps-mask = <0x0 0x00200000>; + vmmc-supply = <&vdd_3v3>; + vqmmc-supply = <&vldo1>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_sdmmc0_default>; status = "okay"; @@ -775,6 +776,8 @@ bus-width = <4>; no-1-8-v; sdhci-caps-mask = <0x0 0x00200000>; + vmmc-supply = <&vdd_3v3>; + vqmmc-supply = <&vdd_3v3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_sdmmc1_default>; status = "okay"; diff --git a/arch/arm/boot/dts/at91rm9200.dtsi b/arch/arm/boot/dts/at91rm9200.dtsi index 7a113325abb9..6f9004ebf424 100644 --- a/arch/arm/boot/dts/at91rm9200.dtsi +++ b/arch/arm/boot/dts/at91rm9200.dtsi @@ -666,7 +666,7 @@ compatible = "atmel,at91rm9200-udc"; reg = <0xfffb0000 0x4000>; interrupts = <11 IRQ_TYPE_LEVEL_HIGH 2>; - clocks = <&pmc PMC_TYPE_PERIPHERAL 11>, <&pmc PMC_TYPE_SYSTEM 2>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 11>, <&pmc PMC_TYPE_SYSTEM 1>; clock-names = "pclk", "hclk"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi index 60d61291f344..024af2db638e 100644 --- a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi +++ b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi @@ -39,6 +39,13 @@ }; + usb1 { + pinctrl_usb1_vbus_gpio: usb1_vbus_gpio { + atmel,pins = + <AT91_PIOC 5 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; /* PC5 GPIO */ + }; + }; + mmc0_slot1 { pinctrl_board_mmc0_slot1: mmc0_slot1-board { atmel,pins = @@ -84,6 +91,8 @@ }; usb1: gadget@fffa4000 { + pinctrl-0 = <&pinctrl_usb1_vbus_gpio>; + pinctrl-names = "default"; atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>; status = "okay"; }; diff --git a/arch/arm/boot/dts/axp22x.dtsi b/arch/arm/boot/dts/axp22x.dtsi index a020c12b2884..f79650afd0a7 100644 --- a/arch/arm/boot/dts/axp22x.dtsi +++ b/arch/arm/boot/dts/axp22x.dtsi @@ -67,6 +67,12 @@ status = "disabled"; }; + axp_gpio: gpio { + compatible = "x-powers,axp221-gpio"; + gpio-controller; + #gpio-cells = <2>; + }; + regulators { /* Default work frequency for buck regulators */ x-powers,dcdc-freq = <3000>; diff --git a/arch/arm/boot/dts/axp809.dtsi b/arch/arm/boot/dts/axp809.dtsi index ab8e5f2d9246..d134d4c00bd8 100644 --- a/arch/arm/boot/dts/axp809.dtsi +++ b/arch/arm/boot/dts/axp809.dtsi @@ -50,4 +50,11 @@ compatible = "x-powers,axp809"; interrupt-controller; #interrupt-cells = <1>; + + axp_gpio: gpio { + compatible = "x-powers,axp809-gpio", + "x-powers,axp221-gpio"; + gpio-controller; + #gpio-cells = <2>; + }; }; diff --git a/arch/arm/boot/dts/axp81x.dtsi b/arch/arm/boot/dts/axp81x.dtsi index b93387b0c1c3..ebaf1c3ce8db 100644 --- a/arch/arm/boot/dts/axp81x.dtsi +++ b/arch/arm/boot/dts/axp81x.dtsi @@ -62,16 +62,6 @@ compatible = "x-powers,axp813-gpio"; gpio-controller; #gpio-cells = <2>; - - gpio0_ldo: gpio0-ldo-pin { - pins = "GPIO0"; - function = "ldo"; - }; - - gpio1_ldo: gpio1-ldo-pin { - pins = "GPIO1"; - function = "ldo"; - }; }; battery_power_supply: battery-power { @@ -144,15 +134,11 @@ }; reg_ldo_io0: ldo-io0 { - pinctrl-names = "default"; - pinctrl-0 = <&gpio0_ldo>; /* Disable by default to avoid conflicts with GPIO */ status = "disabled"; }; reg_ldo_io1: ldo-io1 { - pinctrl-names = "default"; - pinctrl-0 = <&gpio1_ldo>; /* Disable by default to avoid conflicts with GPIO */ status = "disabled"; }; diff --git a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts index 4432412044de..d5f8823230db 100644 --- a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts +++ b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts @@ -2,6 +2,7 @@ /dts-v1/; #include "bcm2711.dtsi" #include "bcm2711-rpi.dtsi" +#include "bcm283x-rpi-led-deprecated.dtsi" #include "bcm283x-rpi-usb-peripheral.dtsi" #include "bcm283x-rpi-wifi-bt.dtsi" @@ -14,20 +15,7 @@ stdout-path = "serial1:115200n8"; }; - leds { - led-act { - gpios = <&gpio 42 GPIO_ACTIVE_HIGH>; - }; - - led-pwr { - label = "PWR"; - gpios = <&expgpio 2 GPIO_ACTIVE_LOW>; - default-state = "keep"; - linux,default-trigger = "default-on"; - }; - }; - - sd_io_1v8_reg: sd_io_1v8_reg { + sd_io_1v8_reg: regulator-sd-io-1v8 { compatible = "regulator-gpio"; regulator-name = "vdd-sd-io"; regulator-min-microvolt = <1800000>; @@ -41,7 +29,7 @@ status = "okay"; }; - sd_vcc_reg: sd_vcc_reg { + sd_vcc_reg: regulator-sd-vcc { compatible = "regulator-fixed"; regulator-name = "vcc-sd"; regulator-min-microvolt = <3300000>; @@ -156,6 +144,19 @@ status = "okay"; }; +&led_act { + gpios = <&gpio 42 GPIO_ACTIVE_HIGH>; +}; + +&leds { + led_pwr: led-pwr { + label = "PWR"; + gpios = <&expgpio 2 GPIO_ACTIVE_LOW>; + default-state = "keep"; + linux,default-trigger = "default-on"; + }; +}; + &pixelvalve0 { status = "okay"; }; diff --git a/arch/arm/boot/dts/bcm2711-rpi-400.dts b/arch/arm/boot/dts/bcm2711-rpi-400.dts index c53d9eb0b802..1ab8184302db 100644 --- a/arch/arm/boot/dts/bcm2711-rpi-400.dts +++ b/arch/arm/boot/dts/bcm2711-rpi-400.dts @@ -11,14 +11,6 @@ stdout-path = "serial1:115200n8"; }; - leds { - /delete-node/ led-act; - - led-pwr { - gpios = <&gpio 42 GPIO_ACTIVE_HIGH>; - }; - }; - gpio-poweroff { compatible = "gpio-poweroff"; gpios = <&expgpio 5 GPIO_ACTIVE_HIGH>; @@ -40,6 +32,14 @@ clock-frequency = <1950000>; }; +&led_pwr { + gpios = <&gpio 42 GPIO_ACTIVE_HIGH>; +}; + +&leds { + /delete-node/ led_act; +}; + &pm { /delete-property/ system-power-controller; }; diff --git a/arch/arm/boot/dts/bcm2711-rpi-cm4-io.dts b/arch/arm/boot/dts/bcm2711-rpi-cm4-io.dts index 19600b629be5..d7ba02f586d3 100644 --- a/arch/arm/boot/dts/bcm2711-rpi-cm4-io.dts +++ b/arch/arm/boot/dts/bcm2711-rpi-cm4-io.dts @@ -1,23 +1,11 @@ // SPDX-License-Identifier: GPL-2.0 /dts-v1/; #include "bcm2711-rpi-cm4.dtsi" +#include "bcm283x-rpi-led-deprecated.dtsi" #include "bcm283x-rpi-usb-host.dtsi" / { model = "Raspberry Pi Compute Module 4 IO Board"; - - leds { - led-act { - gpios = <&gpio 42 GPIO_ACTIVE_HIGH>; - }; - - led-pwr { - label = "PWR"; - gpios = <&expgpio 2 GPIO_ACTIVE_LOW>; - default-state = "keep"; - linux,default-trigger = "default-on"; - }; - }; }; &ddc0 { @@ -113,6 +101,19 @@ status = "okay"; }; +&led_act { + gpios = <&gpio 42 GPIO_ACTIVE_HIGH>; +}; + +&leds { + led-pwr { + label = "PWR"; + gpios = <&expgpio 2 GPIO_ACTIVE_LOW>; + default-state = "keep"; + linux,default-trigger = "default-on"; + }; +}; + &pixelvalve0 { status = "okay"; }; diff --git a/arch/arm/boot/dts/bcm2711-rpi-cm4.dtsi b/arch/arm/boot/dts/bcm2711-rpi-cm4.dtsi index a2954d466a73..48e63ab7848c 100644 --- a/arch/arm/boot/dts/bcm2711-rpi-cm4.dtsi +++ b/arch/arm/boot/dts/bcm2711-rpi-cm4.dtsi @@ -12,7 +12,7 @@ stdout-path = "serial1:115200n8"; }; - sd_io_1v8_reg: sd_io_1v8_reg { + sd_io_1v8_reg: regulator-sd-io-1v8 { compatible = "regulator-gpio"; regulator-name = "vdd-sd-io"; regulator-min-microvolt = <1800000>; @@ -26,7 +26,7 @@ status = "okay"; }; - sd_vcc_reg: sd_vcc_reg { + sd_vcc_reg: regulator-sd-vcc { compatible = "regulator-fixed"; regulator-name = "vcc-sd"; regulator-min-microvolt = <3300000>; diff --git a/arch/arm/boot/dts/bcm2711.dtsi b/arch/arm/boot/dts/bcm2711.dtsi index 941c4d16791b..097e9f252235 100644 --- a/arch/arm/boot/dts/bcm2711.dtsi +++ b/arch/arm/boot/dts/bcm2711.dtsi @@ -48,7 +48,7 @@ * This node is the provider for the enable-method for * bringing up secondary cores. */ - local_intc: local_intc@40000000 { + local_intc: interrupt-controller@40000000 { compatible = "brcm,bcm2836-l1-intc"; reg = <0x40000000 0x100>; }; @@ -536,6 +536,7 @@ */ l2: l2-cache0 { compatible = "cache"; + cache-unified; cache-size = <0x100000>; cache-line-size = <64>; cache-sets = <1024>; // 1MiB(size)/64(line-size)=16384ways/16-way set @@ -647,21 +648,21 @@ gpio-ranges = <&gpio 0 0 58>; - gpclk0_gpio49: gpclk0_gpio49 { + gpclk0_gpio49: gpclk0-gpio49 { pin-gpclk { pins = "gpio49"; function = "alt1"; bias-disable; }; }; - gpclk1_gpio50: gpclk1_gpio50 { + gpclk1_gpio50: gpclk1-gpio50 { pin-gpclk { pins = "gpio50"; function = "alt1"; bias-disable; }; }; - gpclk2_gpio51: gpclk2_gpio51 { + gpclk2_gpio51: gpclk2-gpio51 { pin-gpclk { pins = "gpio51"; function = "alt1"; @@ -669,7 +670,7 @@ }; }; - i2c0_gpio46: i2c0_gpio46 { + i2c0_gpio46: i2c0-gpio46 { pin-sda { function = "alt0"; pins = "gpio46"; @@ -681,7 +682,7 @@ bias-disable; }; }; - i2c1_gpio46: i2c1_gpio46 { + i2c1_gpio46: i2c1-gpio46 { pin-sda { function = "alt1"; pins = "gpio46"; @@ -693,7 +694,7 @@ bias-disable; }; }; - i2c3_gpio2: i2c3_gpio2 { + i2c3_gpio2: i2c3-gpio2 { pin-sda { function = "alt5"; pins = "gpio2"; @@ -705,7 +706,7 @@ bias-disable; }; }; - i2c3_gpio4: i2c3_gpio4 { + i2c3_gpio4: i2c3-gpio4 { pin-sda { function = "alt5"; pins = "gpio4"; @@ -717,7 +718,7 @@ bias-disable; }; }; - i2c4_gpio6: i2c4_gpio6 { + i2c4_gpio6: i2c4-gpio6 { pin-sda { function = "alt5"; pins = "gpio6"; @@ -729,7 +730,7 @@ bias-disable; }; }; - i2c4_gpio8: i2c4_gpio8 { + i2c4_gpio8: i2c4-gpio8 { pin-sda { function = "alt5"; pins = "gpio8"; @@ -741,7 +742,7 @@ bias-disable; }; }; - i2c5_gpio10: i2c5_gpio10 { + i2c5_gpio10: i2c5-gpio10 { pin-sda { function = "alt5"; pins = "gpio10"; @@ -753,7 +754,7 @@ bias-disable; }; }; - i2c5_gpio12: i2c5_gpio12 { + i2c5_gpio12: i2c5-gpio12 { pin-sda { function = "alt5"; pins = "gpio12"; @@ -765,7 +766,7 @@ bias-disable; }; }; - i2c6_gpio0: i2c6_gpio0 { + i2c6_gpio0: i2c6-gpio0 { pin-sda { function = "alt5"; pins = "gpio0"; @@ -777,7 +778,7 @@ bias-disable; }; }; - i2c6_gpio22: i2c6_gpio22 { + i2c6_gpio22: i2c6-gpio22 { pin-sda { function = "alt5"; pins = "gpio22"; @@ -789,7 +790,7 @@ bias-disable; }; }; - i2c_slave_gpio8: i2c_slave_gpio8 { + i2c_slave_gpio8: i2c-slave-gpio8 { pins-i2c-slave { pins = "gpio8", "gpio9", @@ -799,7 +800,7 @@ }; }; - jtag_gpio48: jtag_gpio48 { + jtag_gpio48: jtag-gpio48 { pins-jtag { pins = "gpio48", "gpio49", @@ -811,7 +812,7 @@ }; }; - mii_gpio28: mii_gpio28 { + mii_gpio28: mii-gpio28 { pins-mii { pins = "gpio28", "gpio29", @@ -820,7 +821,7 @@ function = "alt4"; }; }; - mii_gpio36: mii_gpio36 { + mii_gpio36: mii-gpio36 { pins-mii { pins = "gpio36", "gpio37", @@ -830,7 +831,7 @@ }; }; - pcm_gpio50: pcm_gpio50 { + pcm_gpio50: pcm-gpio50 { pins-pcm { pins = "gpio50", "gpio51", @@ -840,63 +841,63 @@ }; }; - pwm0_0_gpio12: pwm0_0_gpio12 { + pwm0_0_gpio12: pwm0-0-gpio12 { pin-pwm { pins = "gpio12"; function = "alt0"; bias-disable; }; }; - pwm0_0_gpio18: pwm0_0_gpio18 { + pwm0_0_gpio18: pwm0-0-gpio18 { pin-pwm { pins = "gpio18"; function = "alt5"; bias-disable; }; }; - pwm1_0_gpio40: pwm1_0_gpio40 { + pwm1_0_gpio40: pwm1-0-gpio40 { pin-pwm { pins = "gpio40"; function = "alt0"; bias-disable; }; }; - pwm0_1_gpio13: pwm0_1_gpio13 { + pwm0_1_gpio13: pwm0-1-gpio13 { pin-pwm { pins = "gpio13"; function = "alt0"; bias-disable; }; }; - pwm0_1_gpio19: pwm0_1_gpio19 { + pwm0_1_gpio19: pwm0-1-gpio19 { pin-pwm { pins = "gpio19"; function = "alt5"; bias-disable; }; }; - pwm1_1_gpio41: pwm1_1_gpio41 { + pwm1_1_gpio41: pwm1-1-gpio41 { pin-pwm { pins = "gpio41"; function = "alt0"; bias-disable; }; }; - pwm0_1_gpio45: pwm0_1_gpio45 { + pwm0_1_gpio45: pwm0-1-gpio45 { pin-pwm { pins = "gpio45"; function = "alt0"; bias-disable; }; }; - pwm0_0_gpio52: pwm0_0_gpio52 { + pwm0_0_gpio52: pwm0-0-gpio52 { pin-pwm { pins = "gpio52"; function = "alt1"; bias-disable; }; }; - pwm0_1_gpio53: pwm0_1_gpio53 { + pwm0_1_gpio53: pwm0-1-gpio53 { pin-pwm { pins = "gpio53"; function = "alt1"; @@ -904,7 +905,7 @@ }; }; - rgmii_gpio35: rgmii_gpio35 { + rgmii_gpio35: rgmii-gpio35 { pin-start-stop { pins = "gpio35"; function = "alt4"; @@ -914,26 +915,26 @@ function = "alt4"; }; }; - rgmii_irq_gpio34: rgmii_irq_gpio34 { + rgmii_irq_gpio34: rgmii-irq-gpio34 { pin-irq { pins = "gpio34"; function = "alt5"; }; }; - rgmii_irq_gpio39: rgmii_irq_gpio39 { + rgmii_irq_gpio39: rgmii-irq-gpio39 { pin-irq { pins = "gpio39"; function = "alt4"; }; }; - rgmii_mdio_gpio28: rgmii_mdio_gpio28 { + rgmii_mdio_gpio28: rgmii-mdio-gpio28 { pins-mdio { pins = "gpio28", "gpio29"; function = "alt5"; }; }; - rgmii_mdio_gpio37: rgmii_mdio_gpio37 { + rgmii_mdio_gpio37: rgmii-mdio-gpio37 { pins-mdio { pins = "gpio37", "gpio38"; @@ -941,7 +942,7 @@ }; }; - spi0_gpio46: spi0_gpio46 { + spi0_gpio46: spi0-gpio46 { pins-spi { pins = "gpio46", "gpio47", @@ -950,7 +951,7 @@ function = "alt2"; }; }; - spi2_gpio46: spi2_gpio46 { + spi2_gpio46: spi2-gpio46 { pins-spi { pins = "gpio46", "gpio47", @@ -960,7 +961,7 @@ function = "alt5"; }; }; - spi3_gpio0: spi3_gpio0 { + spi3_gpio0: spi3-gpio0 { pins-spi { pins = "gpio0", "gpio1", @@ -969,7 +970,7 @@ function = "alt3"; }; }; - spi4_gpio4: spi4_gpio4 { + spi4_gpio4: spi4-gpio4 { pins-spi { pins = "gpio4", "gpio5", @@ -978,7 +979,7 @@ function = "alt3"; }; }; - spi5_gpio12: spi5_gpio12 { + spi5_gpio12: spi5-gpio12 { pins-spi { pins = "gpio12", "gpio13", @@ -987,7 +988,7 @@ function = "alt3"; }; }; - spi6_gpio18: spi6_gpio18 { + spi6_gpio18: spi6-gpio18 { pins-spi { pins = "gpio18", "gpio19", @@ -997,7 +998,7 @@ }; }; - uart2_gpio0: uart2_gpio0 { + uart2_gpio0: uart2-gpio0 { pin-tx { pins = "gpio0"; function = "alt4"; @@ -1009,7 +1010,7 @@ bias-pull-up; }; }; - uart2_ctsrts_gpio2: uart2_ctsrts_gpio2 { + uart2_ctsrts_gpio2: uart2-ctsrts-gpio2 { pin-cts { pins = "gpio2"; function = "alt4"; @@ -1021,7 +1022,7 @@ bias-disable; }; }; - uart3_gpio4: uart3_gpio4 { + uart3_gpio4: uart3-gpio4 { pin-tx { pins = "gpio4"; function = "alt4"; @@ -1033,7 +1034,7 @@ bias-pull-up; }; }; - uart3_ctsrts_gpio6: uart3_ctsrts_gpio6 { + uart3_ctsrts_gpio6: uart3-ctsrts-gpio6 { pin-cts { pins = "gpio6"; function = "alt4"; @@ -1045,7 +1046,7 @@ bias-disable; }; }; - uart4_gpio8: uart4_gpio8 { + uart4_gpio8: uart4-gpio8 { pin-tx { pins = "gpio8"; function = "alt4"; @@ -1057,7 +1058,7 @@ bias-pull-up; }; }; - uart4_ctsrts_gpio10: uart4_ctsrts_gpio10 { + uart4_ctsrts_gpio10: uart4-ctsrts-gpio10 { pin-cts { pins = "gpio10"; function = "alt4"; @@ -1069,7 +1070,7 @@ bias-disable; }; }; - uart5_gpio12: uart5_gpio12 { + uart5_gpio12: uart5-gpio12 { pin-tx { pins = "gpio12"; function = "alt4"; @@ -1081,7 +1082,7 @@ bias-pull-up; }; }; - uart5_ctsrts_gpio14: uart5_ctsrts_gpio14 { + uart5_ctsrts_gpio14: uart5-ctsrts-gpio14 { pin-cts { pins = "gpio14"; function = "alt4"; diff --git a/arch/arm/boot/dts/bcm2835-common.dtsi b/arch/arm/boot/dts/bcm2835-common.dtsi index a037d2bc5b11..bb7e8f7facaf 100644 --- a/arch/arm/boot/dts/bcm2835-common.dtsi +++ b/arch/arm/boot/dts/bcm2835-common.dtsi @@ -152,41 +152,41 @@ }; &gpio { - i2c_slave_gpio18: i2c_slave_gpio18 { + i2c_slave_gpio18: i2c-slave-gpio18 { brcm,pins = <18 19 20 21>; brcm,function = <BCM2835_FSEL_ALT3>; }; - jtag_gpio4: jtag_gpio4 { + jtag_gpio4: jtag-gpio4 { brcm,pins = <4 5 6 12 13>; brcm,function = <BCM2835_FSEL_ALT5>; }; - pwm0_gpio12: pwm0_gpio12 { + pwm0_gpio12: pwm0-gpio12 { brcm,pins = <12>; brcm,function = <BCM2835_FSEL_ALT0>; }; - pwm0_gpio18: pwm0_gpio18 { + pwm0_gpio18: pwm0-gpio18 { brcm,pins = <18>; brcm,function = <BCM2835_FSEL_ALT5>; }; - pwm0_gpio40: pwm0_gpio40 { + pwm0_gpio40: pwm0-gpio40 { brcm,pins = <40>; brcm,function = <BCM2835_FSEL_ALT0>; }; - pwm1_gpio13: pwm1_gpio13 { + pwm1_gpio13: pwm1-gpio13 { brcm,pins = <13>; brcm,function = <BCM2835_FSEL_ALT0>; }; - pwm1_gpio19: pwm1_gpio19 { + pwm1_gpio19: pwm1-gpio19 { brcm,pins = <19>; brcm,function = <BCM2835_FSEL_ALT5>; }; - pwm1_gpio41: pwm1_gpio41 { + pwm1_gpio41: pwm1-gpio41 { brcm,pins = <41>; brcm,function = <BCM2835_FSEL_ALT0>; }; - pwm1_gpio45: pwm1_gpio45 { + pwm1_gpio45: pwm1-gpio45 { brcm,pins = <45>; brcm,function = <BCM2835_FSEL_ALT0>; }; diff --git a/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts b/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts index 9b9a18bbb20a..02ce817868ba 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts @@ -2,6 +2,8 @@ /dts-v1/; #include "bcm2835.dtsi" #include "bcm2835-rpi.dtsi" +#include "bcm2835-rpi-common.dtsi" +#include "bcm283x-rpi-led-deprecated.dtsi" #include "bcm283x-rpi-usb-host.dtsi" / { @@ -12,19 +14,6 @@ device_type = "memory"; reg = <0 0x10000000>; }; - - leds { - led-act { - gpios = <&gpio 47 GPIO_ACTIVE_HIGH>; - }; - - led-pwr { - label = "PWR"; - gpios = <&gpio 35 GPIO_ACTIVE_HIGH>; - default-state = "keep"; - linux,default-trigger = "default-on"; - }; - }; }; &gpio { @@ -107,6 +96,19 @@ status = "okay"; }; +&led_act { + gpios = <&gpio 47 GPIO_ACTIVE_HIGH>; +}; + +&leds { + led-pwr { + label = "PWR"; + gpios = <&gpio 35 GPIO_ACTIVE_HIGH>; + default-state = "keep"; + linux,default-trigger = "default-on"; + }; +}; + &pwm { pinctrl-names = "default"; pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>; diff --git a/arch/arm/boot/dts/bcm2835-rpi-a.dts b/arch/arm/boot/dts/bcm2835-rpi-a.dts index f664e4fced93..3fdf60eb11dc 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-a.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-a.dts @@ -2,6 +2,8 @@ /dts-v1/; #include "bcm2835.dtsi" #include "bcm2835-rpi.dtsi" +#include "bcm2835-rpi-common.dtsi" +#include "bcm283x-rpi-led-deprecated.dtsi" #include "bcm283x-rpi-usb-host.dtsi" / { @@ -12,12 +14,6 @@ device_type = "memory"; reg = <0 0x10000000>; }; - - leds { - led-act { - gpios = <&gpio 16 GPIO_ACTIVE_LOW>; - }; - }; }; &gpio { @@ -102,6 +98,10 @@ status = "okay"; }; +&led_act { + gpios = <&gpio 16 GPIO_ACTIVE_LOW>; +}; + &pwm { pinctrl-names = "default"; pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>; diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts index 248feb2ed23d..9956fd06a4b6 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts @@ -2,6 +2,8 @@ /dts-v1/; #include "bcm2835.dtsi" #include "bcm2835-rpi.dtsi" +#include "bcm2835-rpi-common.dtsi" +#include "bcm283x-rpi-led-deprecated.dtsi" #include "bcm283x-rpi-smsc9514.dtsi" #include "bcm283x-rpi-usb-host.dtsi" @@ -13,19 +15,6 @@ device_type = "memory"; reg = <0 0x20000000>; }; - - leds { - led-act { - gpios = <&gpio 47 GPIO_ACTIVE_HIGH>; - }; - - led-pwr { - label = "PWR"; - gpios = <&gpio 35 GPIO_ACTIVE_HIGH>; - default-state = "keep"; - linux,default-trigger = "default-on"; - }; - }; }; &gpio { @@ -109,6 +98,19 @@ status = "okay"; }; +&led_act { + gpios = <&gpio 47 GPIO_ACTIVE_HIGH>; +}; + +&leds { + led-pwr { + label = "PWR"; + gpios = <&gpio 35 GPIO_ACTIVE_HIGH>; + default-state = "keep"; + linux,default-trigger = "default-on"; + }; +}; + &pwm { pinctrl-names = "default"; pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>; diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts b/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts index f5b66d3f4ff3..4e1770afb145 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts @@ -2,6 +2,8 @@ /dts-v1/; #include "bcm2835.dtsi" #include "bcm2835-rpi.dtsi" +#include "bcm2835-rpi-common.dtsi" +#include "bcm283x-rpi-led-deprecated.dtsi" #include "bcm283x-rpi-smsc9512.dtsi" #include "bcm283x-rpi-usb-host.dtsi" @@ -13,12 +15,6 @@ device_type = "memory"; reg = <0 0x10000000>; }; - - leds { - led-act { - gpios = <&gpio 16 GPIO_ACTIVE_LOW>; - }; - }; }; &gpio { @@ -102,6 +98,10 @@ status = "okay"; }; +&led_act { + gpios = <&gpio 16 GPIO_ACTIVE_LOW>; +}; + &pwm { pinctrl-names = "default"; pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>; diff --git a/arch/arm/boot/dts/bcm2835-rpi-b.dts b/arch/arm/boot/dts/bcm2835-rpi-b.dts index f589bede2b11..eec1d0892d33 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-b.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-b.dts @@ -2,6 +2,8 @@ /dts-v1/; #include "bcm2835.dtsi" #include "bcm2835-rpi.dtsi" +#include "bcm2835-rpi-common.dtsi" +#include "bcm283x-rpi-led-deprecated.dtsi" #include "bcm283x-rpi-smsc9512.dtsi" #include "bcm283x-rpi-usb-host.dtsi" @@ -13,12 +15,6 @@ device_type = "memory"; reg = <0 0x10000000>; }; - - leds { - led-act { - gpios = <&gpio 16 GPIO_ACTIVE_LOW>; - }; - }; }; &gpio { @@ -96,6 +92,10 @@ status = "okay"; }; +&led_act { + gpios = <&gpio 16 GPIO_ACTIVE_LOW>; +}; + &pwm { pinctrl-names = "default"; pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>; diff --git a/arch/arm/boot/dts/bcm2835-rpi-cm1.dtsi b/arch/arm/boot/dts/bcm2835-rpi-cm1.dtsi index e4e6b6abbfc1..750cd76948e3 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-cm1.dtsi +++ b/arch/arm/boot/dts/bcm2835-rpi-cm1.dtsi @@ -2,6 +2,8 @@ /dts-v1/; #include "bcm2835.dtsi" #include "bcm2835-rpi.dtsi" +#include "bcm2835-rpi-common.dtsi" +#include "bcm283x-rpi-led-deprecated.dtsi" / { leds { @@ -32,6 +34,10 @@ }; }; +&led_act { + gpios = <&gpio 47 GPIO_ACTIVE_LOW>; +}; + &sdhost { non-removable; vmmc-supply = <®_3v3>; diff --git a/arch/arm/boot/dts/bcm2835-rpi-common.dtsi b/arch/arm/boot/dts/bcm2835-rpi-common.dtsi index 8a55b6cded59..4e7b4a592da7 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-common.dtsi +++ b/arch/arm/boot/dts/bcm2835-rpi-common.dtsi @@ -7,6 +7,23 @@ #include <dt-bindings/power/raspberrypi-power.h> +&firmware { + firmware_clocks: clocks { + compatible = "raspberrypi,firmware-clocks"; + #clock-cells = <1>; + }; +}; + +&hdmi { + clocks = <&firmware_clocks 9>, + <&firmware_clocks 13>; + clock-names = "pixel", "hdmi"; +}; + &v3d { power-domains = <&power RPI_POWER_DOMAIN_V3D>; }; + +&vec { + clocks = <&firmware_clocks 15>; +}; diff --git a/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts b/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts index 596bb1ef994e..dbf825985ec0 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts @@ -6,6 +6,8 @@ /dts-v1/; #include "bcm2835.dtsi" #include "bcm2835-rpi.dtsi" +#include "bcm2835-rpi-common.dtsi" +#include "bcm283x-rpi-led-deprecated.dtsi" #include "bcm283x-rpi-usb-otg.dtsi" #include "bcm283x-rpi-wifi-bt.dtsi" @@ -22,12 +24,6 @@ /* 8250 auxiliary UART instead of pl011 */ stdout-path = "serial1:115200n8"; }; - - leds { - led-act { - gpios = <&gpio 47 GPIO_ACTIVE_LOW>; - }; - }; }; &bt { @@ -110,6 +106,10 @@ status = "okay"; }; +&led_act { + gpios = <&gpio 47 GPIO_ACTIVE_LOW>; +}; + &sdhci { pinctrl-0 = <&emmc_gpio34 &gpclk2_gpio43>; }; diff --git a/arch/arm/boot/dts/bcm2835-rpi-zero.dts b/arch/arm/boot/dts/bcm2835-rpi-zero.dts index a65c2bca69ea..f80e65a825fd 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-zero.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-zero.dts @@ -6,6 +6,8 @@ /dts-v1/; #include "bcm2835.dtsi" #include "bcm2835-rpi.dtsi" +#include "bcm2835-rpi-common.dtsi" +#include "bcm283x-rpi-led-deprecated.dtsi" #include "bcm283x-rpi-usb-otg.dtsi" / { @@ -16,12 +18,6 @@ device_type = "memory"; reg = <0 0x20000000>; }; - - leds { - led-act { - gpios = <&gpio 47 GPIO_ACTIVE_HIGH>; - }; - }; }; &gpio { @@ -104,6 +100,10 @@ status = "okay"; }; +&led_act { + gpios = <&gpio 47 GPIO_ACTIVE_HIGH>; +}; + &sdhost { pinctrl-names = "default"; pinctrl-0 = <&sdhost_gpio48>; diff --git a/arch/arm/boot/dts/bcm2835-rpi.dtsi b/arch/arm/boot/dts/bcm2835-rpi.dtsi index 87ddcad76083..ee9ee9d1fe65 100644 --- a/arch/arm/boot/dts/bcm2835-rpi.dtsi +++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi @@ -1,16 +1,6 @@ #include <dt-bindings/power/raspberrypi-power.h> / { - leds { - compatible = "gpio-leds"; - - led-act { - label = "ACT"; - default-state = "keep"; - linux,default-trigger = "heartbeat"; - }; - }; - soc { firmware: firmware { compatible = "raspberrypi,bcm2835-firmware", "simple-mfd"; diff --git a/arch/arm/boot/dts/bcm2835.dtsi b/arch/arm/boot/dts/bcm2835.dtsi index 1c90e5a44283..15cb331febbb 100644 --- a/arch/arm/boot/dts/bcm2835.dtsi +++ b/arch/arm/boot/dts/bcm2835.dtsi @@ -1,7 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 #include "bcm283x.dtsi" #include "bcm2835-common.dtsi" -#include "bcm2835-rpi-common.dtsi" / { compatible = "brcm,bcm2835"; diff --git a/arch/arm/boot/dts/bcm2836-rpi-2-b.dts b/arch/arm/boot/dts/bcm2836-rpi-2-b.dts index 3635502b1e0a..6068ec390081 100644 --- a/arch/arm/boot/dts/bcm2836-rpi-2-b.dts +++ b/arch/arm/boot/dts/bcm2836-rpi-2-b.dts @@ -2,6 +2,7 @@ /dts-v1/; #include "bcm2836.dtsi" #include "bcm2836-rpi.dtsi" +#include "bcm283x-rpi-led-deprecated.dtsi" #include "bcm283x-rpi-smsc9514.dtsi" #include "bcm283x-rpi-usb-host.dtsi" @@ -13,19 +14,6 @@ device_type = "memory"; reg = <0 0x40000000>; }; - - leds { - led-act { - gpios = <&gpio 47 GPIO_ACTIVE_HIGH>; - }; - - led-pwr { - label = "PWR"; - gpios = <&gpio 35 GPIO_ACTIVE_HIGH>; - default-state = "keep"; - linux,default-trigger = "default-on"; - }; - }; }; &gpio { @@ -109,6 +97,19 @@ status = "okay"; }; +&led_act { + gpios = <&gpio 47 GPIO_ACTIVE_HIGH>; +}; + +&leds { + led-pwr { + label = "PWR"; + gpios = <&gpio 35 GPIO_ACTIVE_HIGH>; + default-state = "keep"; + linux,default-trigger = "default-on"; + }; +}; + &pwm { pinctrl-names = "default"; pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>; diff --git a/arch/arm/boot/dts/bcm2836-rpi.dtsi b/arch/arm/boot/dts/bcm2836-rpi.dtsi index c4c858b984c6..48b03b55ff56 100644 --- a/arch/arm/boot/dts/bcm2836-rpi.dtsi +++ b/arch/arm/boot/dts/bcm2836-rpi.dtsi @@ -1,5 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 #include "bcm2835-rpi.dtsi" +#include "bcm2835-rpi-common.dtsi" &vchiq { compatible = "brcm,bcm2836-vchiq", "brcm,bcm2835-vchiq"; diff --git a/arch/arm/boot/dts/bcm2836.dtsi b/arch/arm/boot/dts/bcm2836.dtsi index 534dacfc4dd5..783fe624ba68 100644 --- a/arch/arm/boot/dts/bcm2836.dtsi +++ b/arch/arm/boot/dts/bcm2836.dtsi @@ -1,7 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 #include "bcm283x.dtsi" #include "bcm2835-common.dtsi" -#include "bcm2835-rpi-common.dtsi" / { compatible = "brcm,bcm2836"; @@ -11,7 +10,7 @@ <0x40000000 0x40000000 0x00001000>; dma-ranges = <0xc0000000 0x00000000 0x3f000000>; - local_intc: local_intc@40000000 { + local_intc: interrupt-controller@40000000 { compatible = "brcm,bcm2836-l1-intc"; reg = <0x40000000 0x100>; interrupt-controller; @@ -113,6 +112,7 @@ */ l2: l2-cache0 { compatible = "cache"; + cache-unified; cache-size = <0x80000>; cache-line-size = <64>; cache-sets = <1024>; // 512KiB(size)/64(line-size)=8192ways/8-way set diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts b/arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts index f7222a28903e..3548306dfbcb 100644 --- a/arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts +++ b/arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts @@ -2,6 +2,7 @@ /dts-v1/; #include "bcm2837.dtsi" #include "bcm2836-rpi.dtsi" +#include "bcm283x-rpi-led-deprecated.dtsi" #include "bcm283x-rpi-usb-host.dtsi" #include "bcm283x-rpi-wifi-bt.dtsi" @@ -18,19 +19,6 @@ device_type = "memory"; reg = <0 0x20000000>; }; - - leds { - led-act { - gpios = <&gpio 29 GPIO_ACTIVE_HIGH>; - }; - - led-pwr { - label = "PWR"; - gpios = <&expgpio 2 GPIO_ACTIVE_LOW>; - default-state = "keep"; - linux,default-trigger = "default-on"; - }; - }; }; &firmware { @@ -124,6 +112,19 @@ status = "okay"; }; +&led_act { + gpios = <&gpio 29 GPIO_ACTIVE_HIGH>; +}; + +&leds { + led-pwr { + label = "PWR"; + gpios = <&expgpio 2 GPIO_ACTIVE_LOW>; + default-state = "keep"; + linux,default-trigger = "default-on"; + }; +}; + &pwm { pinctrl-names = "default"; pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio41>; diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts b/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts index ec721d323ac5..2f1800cbc522 100644 --- a/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts +++ b/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts @@ -3,6 +3,7 @@ #include "bcm2837.dtsi" #include "bcm2836-rpi.dtsi" #include "bcm283x-rpi-lan7515.dtsi" +#include "bcm283x-rpi-led-deprecated.dtsi" #include "bcm283x-rpi-usb-host.dtsi" #include "bcm283x-rpi-wifi-bt.dtsi" @@ -19,19 +20,6 @@ device_type = "memory"; reg = <0 0x40000000>; }; - - leds { - led-act { - gpios = <&gpio 29 GPIO_ACTIVE_HIGH>; - }; - - led-pwr { - label = "PWR"; - gpios = <&expgpio 2 GPIO_ACTIVE_LOW>; - default-state = "keep"; - linux,default-trigger = "default-on"; - }; - }; }; &bt { @@ -130,6 +118,19 @@ status = "okay"; }; +&led_act { + gpios = <&gpio 29 GPIO_ACTIVE_HIGH>; +}; + +&leds { + led-pwr { + label = "PWR"; + gpios = <&expgpio 2 GPIO_ACTIVE_LOW>; + default-state = "keep"; + linux,default-trigger = "default-on"; + }; +}; + &pwm { pinctrl-names = "default"; pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio41>; diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts index fb6a417d73e7..61270340075c 100644 --- a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts +++ b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts @@ -2,6 +2,7 @@ /dts-v1/; #include "bcm2837.dtsi" #include "bcm2836-rpi.dtsi" +#include "bcm283x-rpi-led-deprecated.dtsi" #include "bcm283x-rpi-smsc9514.dtsi" #include "bcm283x-rpi-usb-host.dtsi" #include "bcm283x-rpi-wifi-bt.dtsi" @@ -19,12 +20,6 @@ device_type = "memory"; reg = <0 0x40000000>; }; - - leds { - led-act { - gpios = <&expgpio 2 GPIO_ACTIVE_HIGH>; - }; - }; }; &bt { @@ -129,6 +124,10 @@ status = "okay"; }; +&led_act { + gpios = <&expgpio 2 GPIO_ACTIVE_HIGH>; +}; + /* uart0 communicates with the BT module */ &uart0 { pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi b/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi index f57b4ca145dd..1e4e4946b6b6 100644 --- a/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi +++ b/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi @@ -9,14 +9,6 @@ reg = <0 0x40000000>; }; - leds { - /* - * Since there is no upstream GPIO driver yet, - * remove the incomplete node. - */ - /delete-node/ led-act; - }; - reg_3v3: fixed-regulator { compatible = "regulator-fixed"; regulator-name = "3V3"; diff --git a/arch/arm/boot/dts/bcm2837-rpi-zero-2-w.dts b/arch/arm/boot/dts/bcm2837-rpi-zero-2-w.dts index 4a768562985e..b9cc4594398b 100644 --- a/arch/arm/boot/dts/bcm2837-rpi-zero-2-w.dts +++ b/arch/arm/boot/dts/bcm2837-rpi-zero-2-w.dts @@ -6,6 +6,7 @@ /dts-v1/; #include "bcm2837.dtsi" #include "bcm2836-rpi.dtsi" +#include "bcm283x-rpi-led-deprecated.dtsi" #include "bcm283x-rpi-usb-otg.dtsi" #include "bcm283x-rpi-wifi-bt.dtsi" @@ -22,12 +23,6 @@ /* 8250 auxiliary UART instead of pl011 */ stdout-path = "serial1:115200n8"; }; - - leds { - led-act { - gpios = <&gpio 29 GPIO_ACTIVE_LOW>; - }; - }; }; &bt { @@ -109,6 +104,10 @@ status = "okay"; }; +&led_act { + gpios = <&gpio 29 GPIO_ACTIVE_LOW>; +}; + &sdhci { pinctrl-0 = <&emmc_gpio34 &gpclk2_gpio43>; }; diff --git a/arch/arm/boot/dts/bcm2837.dtsi b/arch/arm/boot/dts/bcm2837.dtsi index 5dbdebc46259..84c08b46519d 100644 --- a/arch/arm/boot/dts/bcm2837.dtsi +++ b/arch/arm/boot/dts/bcm2837.dtsi @@ -1,6 +1,5 @@ #include "bcm283x.dtsi" #include "bcm2835-common.dtsi" -#include "bcm2835-rpi-common.dtsi" / { compatible = "brcm,bcm2837"; @@ -115,6 +114,7 @@ */ l2: l2-cache0 { compatible = "cache"; + cache-unified; cache-size = <0x80000>; cache-line-size = <64>; cache-sets = <512>; // 512KiB(size)/64(line-size)=8192ways/16-way set diff --git a/arch/arm/boot/dts/bcm283x-rpi-led-deprecated.dtsi b/arch/arm/boot/dts/bcm283x-rpi-led-deprecated.dtsi new file mode 100644 index 000000000000..f83e56de1a72 --- /dev/null +++ b/arch/arm/boot/dts/bcm283x-rpi-led-deprecated.dtsi @@ -0,0 +1,18 @@ +// SPDX-License-Identifier: GPL-2.0 + +/ { + /* + * This file provides the now deprecated ACT LED to the + * Raspberry Pi boards. Please don't include this file + * for new boards! + */ + leds: leds { + compatible = "gpio-leds"; + + led_act: led-act { + label = "ACT"; + default-state = "keep"; + linux,default-trigger = "heartbeat"; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi index d2d9c6e67f39..c9c52a19ef3b 100644 --- a/arch/arm/boot/dts/bcm283x.dtsi +++ b/arch/arm/boot/dts/bcm283x.dtsi @@ -135,17 +135,17 @@ * groups only make sense to switch to a * particular function together. */ - dpi_gpio0: dpi_gpio0 { + dpi_gpio0: dpi-gpio0 { brcm,pins = <0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27>; brcm,function = <BCM2835_FSEL_ALT2>; }; - emmc_gpio22: emmc_gpio22 { + emmc_gpio22: emmc-gpio22 { brcm,pins = <22 23 24 25 26 27>; brcm,function = <BCM2835_FSEL_ALT3>; }; - emmc_gpio34: emmc_gpio34 { + emmc_gpio34: emmc-gpio34 { brcm,pins = <34 35 36 37 38 39>; brcm,function = <BCM2835_FSEL_ALT3>; brcm,pull = <BCM2835_PUD_OFF @@ -155,95 +155,95 @@ BCM2835_PUD_UP BCM2835_PUD_UP>; }; - emmc_gpio48: emmc_gpio48 { + emmc_gpio48: emmc-gpio48 { brcm,pins = <48 49 50 51 52 53>; brcm,function = <BCM2835_FSEL_ALT3>; }; - gpclk0_gpio4: gpclk0_gpio4 { + gpclk0_gpio4: gpclk0-gpio4 { brcm,pins = <4>; brcm,function = <BCM2835_FSEL_ALT0>; }; - gpclk1_gpio5: gpclk1_gpio5 { + gpclk1_gpio5: gpclk1-gpio5 { brcm,pins = <5>; brcm,function = <BCM2835_FSEL_ALT0>; }; - gpclk1_gpio42: gpclk1_gpio42 { + gpclk1_gpio42: gpclk1-gpio42 { brcm,pins = <42>; brcm,function = <BCM2835_FSEL_ALT0>; }; - gpclk1_gpio44: gpclk1_gpio44 { + gpclk1_gpio44: gpclk1-gpio44 { brcm,pins = <44>; brcm,function = <BCM2835_FSEL_ALT0>; }; - gpclk2_gpio6: gpclk2_gpio6 { + gpclk2_gpio6: gpclk2-gpio6 { brcm,pins = <6>; brcm,function = <BCM2835_FSEL_ALT0>; }; - gpclk2_gpio43: gpclk2_gpio43 { + gpclk2_gpio43: gpclk2-gpio43 { brcm,pins = <43>; brcm,function = <BCM2835_FSEL_ALT0>; brcm,pull = <BCM2835_PUD_OFF>; }; - i2c0_gpio0: i2c0_gpio0 { + i2c0_gpio0: i2c0-gpio0 { brcm,pins = <0 1>; brcm,function = <BCM2835_FSEL_ALT0>; }; - i2c0_gpio28: i2c0_gpio28 { + i2c0_gpio28: i2c0-gpio28 { brcm,pins = <28 29>; brcm,function = <BCM2835_FSEL_ALT0>; }; - i2c0_gpio44: i2c0_gpio44 { + i2c0_gpio44: i2c0-gpio44 { brcm,pins = <44 45>; brcm,function = <BCM2835_FSEL_ALT1>; }; - i2c1_gpio2: i2c1_gpio2 { + i2c1_gpio2: i2c1-gpio2 { brcm,pins = <2 3>; brcm,function = <BCM2835_FSEL_ALT0>; }; - i2c1_gpio44: i2c1_gpio44 { + i2c1_gpio44: i2c1-gpio44 { brcm,pins = <44 45>; brcm,function = <BCM2835_FSEL_ALT2>; }; - jtag_gpio22: jtag_gpio22 { + jtag_gpio22: jtag-gpio22 { brcm,pins = <22 23 24 25 26 27>; brcm,function = <BCM2835_FSEL_ALT4>; }; - pcm_gpio18: pcm_gpio18 { + pcm_gpio18: pcm-gpio18 { brcm,pins = <18 19 20 21>; brcm,function = <BCM2835_FSEL_ALT0>; }; - pcm_gpio28: pcm_gpio28 { + pcm_gpio28: pcm-gpio28 { brcm,pins = <28 29 30 31>; brcm,function = <BCM2835_FSEL_ALT2>; }; - sdhost_gpio48: sdhost_gpio48 { + sdhost_gpio48: sdhost-gpio48 { brcm,pins = <48 49 50 51 52 53>; brcm,function = <BCM2835_FSEL_ALT0>; }; - spi0_gpio7: spi0_gpio7 { + spi0_gpio7: spi0-gpio7 { brcm,pins = <7 8 9 10 11>; brcm,function = <BCM2835_FSEL_ALT0>; }; - spi0_gpio35: spi0_gpio35 { + spi0_gpio35: spi0-gpio35 { brcm,pins = <35 36 37 38 39>; brcm,function = <BCM2835_FSEL_ALT0>; }; - spi1_gpio16: spi1_gpio16 { + spi1_gpio16: spi1-gpio16 { brcm,pins = <16 17 18 19 20 21>; brcm,function = <BCM2835_FSEL_ALT4>; }; - spi2_gpio40: spi2_gpio40 { + spi2_gpio40: spi2-gpio40 { brcm,pins = <40 41 42 43 44 45>; brcm,function = <BCM2835_FSEL_ALT4>; }; - uart0_gpio14: uart0_gpio14 { + uart0_gpio14: uart0-gpio14 { brcm,pins = <14 15>; brcm,function = <BCM2835_FSEL_ALT0>; }; @@ -252,50 +252,50 @@ * people often run uart0 on the two pins * without flow control. */ - uart0_ctsrts_gpio16: uart0_ctsrts_gpio16 { + uart0_ctsrts_gpio16: uart0-ctsrts-gpio16 { brcm,pins = <16 17>; brcm,function = <BCM2835_FSEL_ALT3>; }; - uart0_ctsrts_gpio30: uart0_ctsrts_gpio30 { + uart0_ctsrts_gpio30: uart0-ctsrts-gpio30 { brcm,pins = <30 31>; brcm,function = <BCM2835_FSEL_ALT3>; brcm,pull = <BCM2835_PUD_UP BCM2835_PUD_OFF>; }; - uart0_gpio32: uart0_gpio32 { + uart0_gpio32: uart0-gpio32 { brcm,pins = <32 33>; brcm,function = <BCM2835_FSEL_ALT3>; brcm,pull = <BCM2835_PUD_OFF BCM2835_PUD_UP>; }; - uart0_gpio36: uart0_gpio36 { + uart0_gpio36: uart0-gpio36 { brcm,pins = <36 37>; brcm,function = <BCM2835_FSEL_ALT2>; }; - uart0_ctsrts_gpio38: uart0_ctsrts_gpio38 { + uart0_ctsrts_gpio38: uart0-ctsrts-gpio38 { brcm,pins = <38 39>; brcm,function = <BCM2835_FSEL_ALT2>; }; - uart1_gpio14: uart1_gpio14 { + uart1_gpio14: uart1-gpio14 { brcm,pins = <14 15>; brcm,function = <BCM2835_FSEL_ALT5>; }; - uart1_ctsrts_gpio16: uart1_ctsrts_gpio16 { + uart1_ctsrts_gpio16: uart1-ctsrts-gpio16 { brcm,pins = <16 17>; brcm,function = <BCM2835_FSEL_ALT5>; }; - uart1_gpio32: uart1_gpio32 { + uart1_gpio32: uart1-gpio32 { brcm,pins = <32 33>; brcm,function = <BCM2835_FSEL_ALT5>; }; - uart1_ctsrts_gpio30: uart1_ctsrts_gpio30 { + uart1_ctsrts_gpio30: uart1-ctsrts-gpio30 { brcm,pins = <30 31>; brcm,function = <BCM2835_FSEL_ALT5>; }; - uart1_gpio40: uart1_gpio40 { + uart1_gpio40: uart1-gpio40 { brcm,pins = <40 41>; brcm,function = <BCM2835_FSEL_ALT5>; }; - uart1_ctsrts_gpio42: uart1_ctsrts_gpio42 { + uart1_ctsrts_gpio42: uart1-ctsrts-gpio42 { brcm,pins = <42 43>; brcm,function = <BCM2835_FSEL_ALT5>; }; diff --git a/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts b/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts index 09ee3e46c0cc..c80ac16ad949 100644 --- a/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts +++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts @@ -28,40 +28,39 @@ leds { compatible = "gpio-leds"; - usb3 { + led-usb3 { label = "bcm53xx:blue:usb3"; gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>; }; - wan { + led-wan { label = "bcm53xx:blue:wan"; gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>; }; - lan { + led-lan { label = "bcm53xx:blue:lan"; gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>; }; - power { + led-power { label = "bcm53xx:blue:power"; gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; linux,default-trigger = "default-on"; }; - all { + led-all { label = "bcm53xx:blue:all"; gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>; linux,default-trigger = "default-on"; }; - 2ghz { + led-2ghz { label = "bcm53xx:blue:2ghz"; gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>; }; - - usb2 { + led-usb2 { label = "bcm53xx:blue:usb2"; gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; }; diff --git a/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts b/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts index 32619c6045d3..3fe17bd7b86d 100644 --- a/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts +++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts @@ -28,24 +28,24 @@ leds { compatible = "gpio-leds"; - usb2 { + led-usb2 { label = "bcm53xx:blue:usb2"; gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>; }; - power { + led-power { label = "bcm53xx:blue:power"; gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; linux,default-trigger = "default-on"; }; - logo { + led-logo { label = "bcm53xx:white:logo"; gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>; linux,default-trigger = "default-on"; }; - usb3 { + led-usb3 { label = "bcm53xx:blue:usb3"; gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; }; diff --git a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp-common.dtsi b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp-common.dtsi index a658b9b7bcec..e583b9cbf07c 100644 --- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp-common.dtsi +++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp-common.dtsi @@ -37,7 +37,7 @@ leds { compatible = "gpio-leds"; - usb { + led-usb { /* label = "bcm53xx:blue:usb"; */ function = LED_FUNCTION_USB; color = <LED_COLOR_ID_BLUE>; @@ -48,14 +48,14 @@ linux,default-trigger = "usbport"; }; - power0 { + led-power0 { /* label = "bcm53xx:red:power"; */ function = LED_FUNCTION_FAULT; color = <LED_COLOR_ID_RED>; gpios = <&hc595 1 GPIO_ACTIVE_HIGH>; }; - power1 { + led-power1 { /* label = "bcm53xx:white:power"; */ function = LED_FUNCTION_POWER; color = <LED_COLOR_ID_WHITE>; @@ -63,7 +63,7 @@ linux,default-trigger = "default-on"; }; - router0 { + led-router0 { /* label = "bcm53xx:blue:router"; */ function = LED_FUNCTION_STATUS; color = <LED_COLOR_ID_BLUE>; @@ -71,14 +71,14 @@ linux,default-trigger = "default-on"; }; - router1 { + led-router1 { /* label = "bcm53xx:amber:router"; */ function = LED_FUNCTION_STATUS; color = <LED_COLOR_ID_AMBER>; gpios = <&hc595 4 GPIO_ACTIVE_HIGH>; }; - wan { + led-wan { /* label = "bcm53xx:blue:wan"; */ function = LED_FUNCTION_WAN; color = <LED_COLOR_ID_BLUE>; @@ -86,14 +86,14 @@ linux,default-trigger = "default-on"; }; - wireless0 { + led-wireless0 { /* label = "bcm53xx:blue:wireless"; */ function = LED_FUNCTION_WLAN; color = <LED_COLOR_ID_BLUE>; gpios = <&hc595 6 GPIO_ACTIVE_HIGH>; }; - wireless1 { + led-wireless1 { /* label = "bcm53xx:amber:wireless"; */ function = LED_FUNCTION_WLAN; color = <LED_COLOR_ID_AMBER>; diff --git a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts index f8f53457dd43..43c698a0a7c3 100644 --- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts +++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts @@ -49,7 +49,7 @@ leds { compatible = "gpio-leds"; - usb { + led-usb { label = "bcm53xx:blue:usb"; gpios = <&hc595 0 GPIO_ACTIVE_HIGH>; trigger-sources = <&ohci_port1>, <&ehci_port1>, @@ -58,40 +58,40 @@ linux,default-trigger = "usbport"; }; - power0 { + led-power0 { label = "bcm53xx:red:power"; gpios = <&hc595 1 GPIO_ACTIVE_HIGH>; }; - power1 { + led-power1 { label = "bcm53xx:white:power"; gpios = <&hc595 2 GPIO_ACTIVE_HIGH>; linux,default-trigger = "default-on"; }; - router0 { + led-router0 { label = "bcm53xx:blue:router"; gpios = <&hc595 3 GPIO_ACTIVE_HIGH>; linux,default-trigger = "default-on"; }; - router1 { + led-router1 { label = "bcm53xx:amber:router"; gpios = <&hc595 4 GPIO_ACTIVE_HIGH>; }; - wan { + led-wan { label = "bcm53xx:blue:wan"; gpios = <&hc595 5 GPIO_ACTIVE_HIGH>; linux,default-trigger = "default-on"; }; - wireless0 { + led-wireless0 { label = "bcm53xx:blue:wireless"; gpios = <&hc595 6 GPIO_ACTIVE_HIGH>; }; - wireless1 { + led-wireless1 { label = "bcm53xx:amber:wireless"; gpios = <&hc595 7 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts b/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts index 14ee410183af..6de7fe204b0c 100644 --- a/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts +++ b/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts @@ -23,19 +23,19 @@ leds { compatible = "gpio-leds"; - 5ghz { + led-5ghz { label = "bcm53xx:blue:5ghz"; gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>; linux,default-trigger = "none"; }; - 2ghz { + led-2ghz { label = "bcm53xx:blue:2ghz"; gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; linux,default-trigger = "none"; }; - status { + led-status { label = "bcm53xx:green:status"; gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>; linux,default-trigger = "timer"; diff --git a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts index 600ab087f5e5..f5b75ba93512 100644 --- a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts +++ b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts @@ -42,7 +42,7 @@ leds { compatible = "gpio-leds"; - status { + led-status { label = "bcm53xx:green:status"; gpios = <&chipcommon 0 GPIO_ACTIVE_HIGH>; linux,default-trigger = "timer"; diff --git a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts index fd6d8d2a4456..89155caf50be 100644 --- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts +++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts @@ -29,24 +29,24 @@ leds { compatible = "gpio-leds"; - logo { + led-logo { label = "bcm53xx:white:logo"; gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>; linux,default-trigger = "default-on"; }; - power0 { + led-power0 { label = "bcm53xx:green:power"; gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>; linux,default-trigger = "default-on"; }; - power1 { + led-power1 { label = "bcm53xx:amber:power"; gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; }; - usb { + led-usb { label = "bcm53xx:blue:usb"; gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>; trigger-sources = <&ohci_port1>, <&ehci_port1>, @@ -54,7 +54,7 @@ linux,default-trigger = "usbport"; }; - wireless { + led-wireless { label = "bcm53xx:blue:wireless"; gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; }; diff --git a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts index 76fc1099d47d..57d00a0b4765 100644 --- a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts +++ b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts @@ -28,29 +28,29 @@ leds { compatible = "gpio-leds"; - logo { + led-logo { label = "bcm53xx:white:logo"; gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>; linux,default-trigger = "default-on"; }; - power0 { + led-power0 { label = "bcm53xx:green:power"; gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>; }; - power1 { + led-power1 { label = "bcm53xx:amber:power"; gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; linux,default-trigger = "default-on"; }; - usb { + led-usb { label = "bcm53xx:blue:usb"; gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>; }; - wireless { + led-wireless { label = "bcm53xx:blue:wireless"; gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; }; diff --git a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts index 6bcdfb73cb9e..26cdeb5cc337 100644 --- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts +++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts @@ -28,64 +28,64 @@ leds { compatible = "gpio-leds"; - power-white { + led-power-white { label = "bcm53xx:white:power"; gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>; linux,default-trigger = "default-on"; }; - power-amber { + led-power-amber { label = "bcm53xx:amber:power"; gpios = <&chipcommon 2 GPIO_ACTIVE_HIGH>; }; - usb2 { + led-usb2 { label = "bcm53xx:white:usb2"; gpios = <&chipcommon 3 GPIO_ACTIVE_HIGH>; trigger-sources = <&ohci_port2>, <&ehci_port2>; linux,default-trigger = "usbport"; }; - usb3-white { + led-usb3-white { label = "bcm53xx:white:usb3"; gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>; trigger-sources = <&xhci_port1>; linux,default-trigger = "usbport"; }; - usb3-green { + led-usb3-green { label = "bcm53xx:green:usb3"; gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>; trigger-sources = <&ohci_port1>, <&ehci_port1>; linux,default-trigger = "usbport"; }; - wps { + led-wps { label = "bcm53xx:white:wps"; gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>; }; - status-red { + led-status-red { label = "bcm53xx:red:status"; gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>; }; - status-green { + led-status-green { label = "bcm53xx:green:status"; gpios = <&chipcommon 9 GPIO_ACTIVE_HIGH>; }; - status-blue { + led-status-blue { label = "bcm53xx:blue:status"; gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>; }; - wan-white { + led-wan-white { label = "bcm53xx:white:wan"; gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>; }; - wan-red { + led-wan-red { label = "bcm53xx:red:wan"; gpios = <&chipcommon 13 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts index ca47cc4f2ba1..3854db0118a9 100644 --- a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts +++ b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts @@ -28,30 +28,30 @@ leds { compatible = "gpio-leds"; - power { + led-power { label = "bcm53xx:blue:power"; gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>; linux,default-trigger = "default-on"; }; - usb2 { + led-usb2 { label = "bcm53xx:blue:usb2"; gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; }; - wan { + led-wan { label = "bcm53xx:blue:wan"; gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>; linux,default-trigger = "default-on"; }; - lan { + led-lan { label = "bcm53xx:blue:lan"; gpios = <&chipcommon 9 GPIO_ACTIVE_LOW>; linux,default-trigger = "default-on"; }; - usb3 { + led-usb3 { label = "bcm53xx:blue:usb3"; gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; }; diff --git a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts index 0edc2543e568..407319cb5c0d 100644 --- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts +++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts @@ -49,40 +49,40 @@ leds { compatible = "gpio-leds"; - power0 { + led-power0 { label = "bcm53xx:green:power"; gpios = <&hc595 1 GPIO_ACTIVE_HIGH>; linux,default-trigger = "default-on"; }; - power1 { + led-power1 { label = "bcm53xx:red:power"; gpios = <&hc595 2 GPIO_ACTIVE_HIGH>; }; - router0 { + led-router0 { label = "bcm53xx:green:router"; gpios = <&hc595 3 GPIO_ACTIVE_HIGH>; linux,default-trigger = "default-on"; }; - router1 { + led-router1 { label = "bcm53xx:amber:router"; gpios = <&hc595 4 GPIO_ACTIVE_HIGH>; }; - wan { + led-wan { label = "bcm53xx:green:wan"; gpios = <&hc595 5 GPIO_ACTIVE_HIGH>; linux,default-trigger = "default-on"; }; - wireless0 { + led-wireless0 { label = "bcm53xx:green:wireless"; gpios = <&hc595 6 GPIO_ACTIVE_HIGH>; }; - wireless1 { + led-wireless1 { label = "bcm53xx:amber:wireless"; gpios = <&hc595 7 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts index 1f0998f34afd..f8622ecce6a2 100644 --- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts +++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts @@ -49,45 +49,45 @@ leds { compatible = "gpio-leds"; - usb { + led-usb { label = "bcm53xx:green:usb"; gpios = <&hc595 0 GPIO_ACTIVE_HIGH>; }; - power0 { + led-power0 { label = "bcm53xx:green:power"; gpios = <&hc595 1 GPIO_ACTIVE_HIGH>; linux,default-trigger = "default-on"; }; - power1 { + led-power1 { label = "bcm53xx:red:power"; gpios = <&hc595 2 GPIO_ACTIVE_HIGH>; }; - router0 { + led-router0 { label = "bcm53xx:green:router"; gpios = <&hc595 3 GPIO_ACTIVE_HIGH>; linux,default-trigger = "default-on"; }; - router1 { + led-router1 { label = "bcm53xx:amber:router"; gpios = <&hc595 4 GPIO_ACTIVE_HIGH>; }; - wan { + led-wan { label = "bcm53xx:green:wan"; gpios = <&hc595 5 GPIO_ACTIVE_HIGH>; linux,default-trigger = "default-on"; }; - wireless0 { + led-wireless0 { label = "bcm53xx:green:wireless"; gpios = <&hc595 6 GPIO_ACTIVE_HIGH>; }; - wireless1 { + led-wireless1 { label = "bcm53xx:amber:wireless"; gpios = <&hc595 7 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts b/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts index c8c02377543b..76c9b30b868d 100644 --- a/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts +++ b/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts @@ -23,19 +23,19 @@ leds { compatible = "gpio-leds"; - 5ghz { + led-5ghz { label = "bcm53xx:blue:5ghz"; gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>; linux,default-trigger = "none"; }; - 2ghz { + led-2ghz { label = "bcm53xx:blue:2ghz"; gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; linux,default-trigger = "none"; }; - status { + led-status { label = "bcm53xx:green:status"; gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>; linux,default-trigger = "timer"; diff --git a/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts b/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts index 3b35a7af4b1c..6ef0c0788e62 100644 --- a/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts +++ b/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts @@ -29,62 +29,62 @@ leds { compatible = "gpio-leds"; - power { + led-power { label = "bcm53xx:green:power"; gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>; linux,default-trigger = "default-on"; }; - lan3 { + led-lan3 { label = "bcm53xx:green:lan3"; gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>; linux,default-trigger = "none"; }; - lan4 { + led-lan4 { label = "bcm53xx:green:lan4"; gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>; linux,default-trigger = "none"; }; - wan { + led-wan { label = "bcm53xx:green:wan"; gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; linux,default-trigger = "none"; }; - lan2 { + led-lan2 { label = "bcm53xx:green:lan2"; gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>; linux,default-trigger = "none"; }; - usb { + led-usb { label = "bcm53xx:green:usb"; gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>; trigger-sources = <&ohci_port2>, <&ehci_port2>; linux,default-trigger = "usbport"; }; - status { + led-status { label = "bcm53xx:green:status"; gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>; linux,default-trigger = "timer"; }; - 2ghz { + led-2ghz { label = "bcm53xx:green:2ghz"; gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>; linux,default-trigger = "none"; }; - 5ghz { + led-5ghz { label = "bcm53xx:green:5ghz"; gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; linux,default-trigger = "none"; }; - lan1 { + led-lan1 { label = "bcm53xx:green:lan1"; gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>; linux,default-trigger = "none"; diff --git a/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts b/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts index 19a7971b5a00..b6a5886698b2 100644 --- a/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts +++ b/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts @@ -23,50 +23,50 @@ leds { compatible = "gpio-leds"; - 2ghz { + led-2ghz { label = "bcm53xx:green:2ghz"; gpios = <&chipcommon 0 GPIO_ACTIVE_HIGH>; }; - lan { + led-lan { label = "bcm53xx:green:lan"; gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>; }; - usb2-port1 { + led-usb2-port1 { label = "bcm53xx:green:usb2-port1"; gpios = <&chipcommon 2 GPIO_ACTIVE_HIGH>; trigger-sources = <&ohci_port1>, <&ehci_port1>; linux,default-trigger = "usbport"; }; - power { + led-power { label = "bcm53xx:green:power"; gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>; linux,default-trigger = "default-on"; }; - wan-green { + led-wan-green { label = "bcm53xx:green:wan"; gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>; }; - wps { + led-wps { label = "bcm53xx:green:wps"; gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>; }; - wan-amber { + led-wan-amber { label = "bcm53xx:amber:wan"; gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>; }; - 5ghz { + led-5ghz { label = "bcm53xx:green:5ghz"; gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>; }; - usb2-port2 { + led-usb2-port2 { label = "bcm53xx:green:usb2-port2"; gpios = <&chipcommon 13 GPIO_ACTIVE_HIGH>; trigger-sources = <&ohci_port2>, <&ehci_port2>; @@ -95,30 +95,15 @@ status = "okay"; partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - boot@0 { - label = "boot"; - reg = <0x000000 0x040000>; - read-only; - }; + compatible = "tplink,safeloader-partitions"; + partitions-table-offset = <0xe50000>; - os-image@100000 { - label = "os-image"; - reg = <0x040000 0x200000>; + partition-os-image { compatible = "brcm,trx"; }; - rootfs@240000 { - label = "rootfs"; - reg = <0x240000 0xc00000>; - }; - - nvram@ff0000 { - label = "nvram"; - reg = <0xff0000 0x010000>; + partition-file-system { + linux,rootfs; }; }; }; diff --git a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts index f52a75c4ca09..4f44cb4df704 100644 --- a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts +++ b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts @@ -28,18 +28,18 @@ leds { compatible = "gpio-leds"; - wps { + led-wps { label = "bcm53xx:blue:wps"; gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>; }; - power { + led-power { label = "bcm53xx:blue:power"; gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; linux,default-trigger = "default-on"; }; - wan { + led-wan { label = "bcm53xx:red:wan"; gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>; }; diff --git a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts index 5ff6c588e16e..b7cd2faa30ce 100644 --- a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts +++ b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts @@ -28,48 +28,48 @@ leds { compatible = "gpio-leds"; - usb { + led-usb { label = "bcm53xx:green:usb"; gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>; }; - power-amber { + led-power-amber { label = "bcm53xx:amber:power"; gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>; }; - power-white { + led-power-white { label = "bcm53xx:white:power"; gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>; linux,default-trigger = "default-on"; }; - router-amber { + led-router-amber { label = "bcm53xx:amber:router"; gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>; }; - router-white { + led-router-white { label = "bcm53xx:white:router"; gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>; }; - wan-amber { + led-wan-amber { label = "bcm53xx:amber:wan"; gpios = <&chipcommon 9 GPIO_ACTIVE_HIGH>; }; - wan-white { + led-wan-white { label = "bcm53xx:white:wan"; gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>; }; - wireless-amber { + led-wireless-amber { label = "bcm53xx:amber:wireless"; gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>; }; - wireless-white { + led-wireless-white { label = "bcm53xx:white:wireless"; gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts index de961fbb6200..24ba8f8f9bf3 100644 --- a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts +++ b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts @@ -28,43 +28,43 @@ leds { compatible = "gpio-leds"; - power-white { + led-power-white { label = "bcm53xx:white:power"; gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>; linux,default-trigger = "default-on"; }; - power-amber { + led-power-amber { label = "bcm53xx:amber:power"; gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; }; - 5ghz { + led-5ghz { label = "bcm53xx:white:5ghz"; gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>; }; - 2ghz { + led-2ghz { label = "bcm53xx:white:2ghz"; gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>; }; - wps { + led-wps { label = "bcm53xx:white:wps"; gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>; }; - wireless { + led-wireless { label = "bcm53xx:white:wireless"; gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>; }; - usb3 { + led-usb3 { label = "bcm53xx:white:usb3"; gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; }; - usb2 { + led-usb2 { label = "bcm53xx:white:usb2"; gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>; }; diff --git a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts index 087f7f60de18..14303ab521ea 100644 --- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts +++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts @@ -39,59 +39,59 @@ leds { compatible = "gpio-leds"; - power-white { + led-power-white { label = "bcm53xx:white:power"; gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>; linux,default-trigger = "default-on"; }; - power-amber { + led-power-amber { label = "bcm53xx:amber:power"; gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; }; - wan-white { + led-wan-white { label = "bcm53xx:white:wan"; gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>; linux,default-trigger = "default-on"; }; - wan-amber { + led-wan-amber { label = "bcm53xx:amber:wan"; gpios = <&chipcommon 9 GPIO_ACTIVE_HIGH>; }; - 5ghz-1 { + led-5ghz-1 { label = "bcm53xx:white:5ghz-1"; gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>; }; - 2ghz { + led-2ghz { label = "bcm53xx:white:2ghz"; gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>; }; - wireless { + led-wireless { label = "bcm53xx:white:wireless"; gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>; }; - wps { + led-wps { label = "bcm53xx:white:wps"; gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>; }; - 5ghz-2 { + led-5ghz-2 { label = "bcm53xx:white:5ghz-2"; gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>; }; - usb3 { + led-usb3 { label = "bcm53xx:white:usb3"; gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; }; - usb2 { + led-usb2 { label = "bcm53xx:white:usb2"; gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>; }; diff --git a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts index 11d1068160da..5a8b2b1567e6 100644 --- a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts +++ b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts @@ -23,27 +23,27 @@ leds { compatible = "gpio-leds"; - lan { + led-lan { label = "bcm53xx:blue:lan"; gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>; }; - wps { + led-wps { label = "bcm53xx:blue:wps"; gpios = <&chipcommon 2 GPIO_ACTIVE_HIGH>; }; - 2ghz { + led-2ghz { label = "bcm53xx:blue:2ghz"; gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>; }; - 5ghz { + led-5ghz { label = "bcm53xx:blue:5ghz"; gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>; }; - usb3 { + led-usb3 { label = "bcm53xx:blue:usb3"; gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>; trigger-sources = <&ohci_port1>, <&ehci_port1>, @@ -51,24 +51,24 @@ linux,default-trigger = "usbport"; }; - usb2 { + led-usb2 { label = "bcm53xx:blue:usb2"; gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>; trigger-sources = <&ohci_port2>, <&ehci_port2>; linux,default-trigger = "usbport"; }; - wan-blue { + led-wan-blue { label = "bcm53xx:blue:wan"; gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>; }; - wan-amber { + led-wan-amber { label = "bcm53xx:amber:wan"; gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>; }; - power { + led-power { label = "bcm53xx:blue:power"; gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>; linux,default-trigger = "default-on"; @@ -104,30 +104,15 @@ status = "okay"; partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - boot@0 { - label = "boot"; - reg = <0x000000 0x040000>; - read-only; - }; + compatible = "tplink,safeloader-partitions"; + partitions-table-offset = <0xe50000>; - os-image@100000 { - label = "os-image"; - reg = <0x040000 0x200000>; + partition-os-image { compatible = "brcm,trx"; }; - rootfs@240000 { - label = "rootfs"; - reg = <0x240000 0xc00000>; - }; - - nvram@ff0000 { - label = "nvram"; - reg = <0xff0000 0x010000>; + partition-file-system { + linux,rootfs; }; }; }; diff --git a/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts b/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts index a5fec56d11c0..a50ff686b557 100644 --- a/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts +++ b/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts @@ -33,37 +33,37 @@ leds { compatible = "gpio-leds"; - power { + led-power { label = "white:power"; gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; linux,default-trigger = "default-on"; }; - wan-red { + led-wan-red { label = "red:wan"; gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>; }; - lan { + led-lan { label = "white:lan"; gpios = <&chipcommon 21 GPIO_ACTIVE_LOW>; }; - usb2 { + led-usb2 { label = "white:usb2"; gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>; trigger-sources = <&ehci_port2>; linux,default-trigger = "usbport"; }; - usb3 { + led-usb3 { label = "white:usb3"; gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; trigger-sources = <&ehci_port1>, <&xhci_port1>; linux,default-trigger = "usbport"; }; - wps { + led-wps { label = "white:wps"; gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>; }; diff --git a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts index 2c38b642a8b8..555fbe41dd8f 100644 --- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts +++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts @@ -43,28 +43,28 @@ leds { compatible = "gpio-leds"; - power-white { + led-power-white { label = "bcm53xx:white:power"; gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>; linux,default-trigger = "default-on"; }; - wan-white { + led-wan-white { label = "bcm53xx:white:wan"; gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>; }; - power-amber { + led-power-amber { label = "bcm53xx:amber:power"; gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>; }; - wan-amber { + led-wan-amber { label = "bcm53xx:amber:wan"; gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; }; - usb3-white { + led-usb3-white { label = "bcm53xx:white:usb3"; gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>; trigger-sources = <&ohci_port1>, <&ehci_port1>, @@ -72,12 +72,12 @@ linux,default-trigger = "usbport"; }; - 2ghz { + led-2ghz { label = "bcm53xx:white:2ghz"; gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>; }; - 5ghz { + led-5ghz { label = "bcm53xx:white:5ghz"; gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; }; diff --git a/arch/arm/boot/dts/bcm47094-dlink-dir-890l.dts b/arch/arm/boot/dts/bcm47094-dlink-dir-890l.dts new file mode 100644 index 000000000000..d945a20b06e0 --- /dev/null +++ b/arch/arm/boot/dts/bcm47094-dlink-dir-890l.dts @@ -0,0 +1,211 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Device tree for D-Link DIR-890L + * D-Link calls this board "WRGAC36" + * this router has the same looks and form factor as D-Link DIR-885L. + * + * Some differences from DIR-885L include a separate USB2 port, separate LEDs + * for USB2 and USB3, a separate VCC supply for the USB2 slot and no + * router/extender switch is mounted (there is an empty mount point on the + * PCB) so this device is a pure router. Also the LAN ports are in the right + * order. + * + * Based on the device tree for DIR-885L + * Copyright (C) 2016 Rafał Miłecki <zajec5@gmail.com> + * Copyright (C) 2022 Linus Walleij + */ + +/dts-v1/; + +#include "bcm47094.dtsi" +#include "bcm5301x-nand-cs0-bch1.dtsi" + +/ { + compatible = "dlink,dir-890l", "brcm,bcm47094", "brcm,bcm4708"; + model = "D-Link DIR-890L"; + + chosen { + bootargs = "console=ttyS0,115200 earlycon"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x08000000>, + <0x88000000 0x08000000>; + }; + + leds { + /* + * LED information is derived from the boot log which + * conveniently lists all the LEDs. + */ + compatible = "gpio-leds"; + + led-power-white { + label = "bcm53xx:white:power"; + gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-on"; + }; + + led-wan-white { + label = "bcm53xx:white:wan"; + gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>; + }; + + led-power-amber { + label = "bcm53xx:amber:power"; + gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>; + }; + + led-wan-amber { + label = "bcm53xx:amber:wan"; + gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; + }; + + led-usb3-white { + label = "bcm53xx:white:usb3"; + gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>; + trigger-sources = <&xhci_port1>; + linux,default-trigger = "usbport"; + }; + + led-usb2-white { + label = "bcm53xx:white:usb2"; + gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>; + trigger-sources = <&ohci_port1>, <&ehci_port1>; + linux,default-trigger = "usbport"; + }; + + led-2ghz { + label = "bcm53xx:white:2ghz"; + gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>; + }; + + led-5ghz { + label = "bcm53xx:white:5ghz"; + gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + button-wps { + label = "WPS"; + linux,code = <KEY_WPS_BUTTON>; + gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>; + }; + + /* Called "factory reset" in the vendor dmesg */ + button-restart { + label = "Reset"; + linux,code = <KEY_RESTART>; + gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; + }; + }; + + /* + * The flash memory is memory mapped at 0x1e000000-0x1fffffff + * 64KB blocks; total size 2MB, same that can be + * found attached to the spi_nor SPI controller. + */ + nvram@1e1f0000 { + compatible = "brcm,nvram"; + reg = <0x1e1f0000 0x00010000>; + + et0macaddr: et0macaddr { + }; + }; +}; + +&gmac2 { + /* + * The NVRAM curiously does not contain a MAC address + * for et2 so since that is the only ethernet interface + * actually in use on the platform, we use this et0 MAC + * address for et2. + */ + nvmem-cells = <&et0macaddr>; + nvmem-cell-names = "mac-address"; +}; + +&spi_nor { + status = "okay"; +}; + +&nandcs { + /* Spansion S34ML01G2, 128MB with 128KB erase blocks */ + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + /* + * This is called "nflash" in the vendor kernel with + * "upgrade" and "rootfs" (probably using OpenWrt + * splitpart). We call it "firmware" like standard tools + * assume. The CFE loader contains incorrect information + * about TRX partitions, ignore this, there are no TRX + * partitions: this device uses SEAMA. + */ + firmware@0 { + label = "firmware"; + reg = <0x00000000 0x08000000>; + }; + }; +}; + +&usb2 { + vcc-gpios = <&chipcommon 21 GPIO_ACTIVE_HIGH>; +}; + +&usb3 { + vcc-gpios = <&chipcommon 18 GPIO_ACTIVE_HIGH>; +}; + +&usb3_phy { + status = "okay"; +}; + +&srab { + status = "okay"; + + ports { + port@0 { + reg = <0>; + label = "lan1"; + }; + + port@1 { + reg = <1>; + label = "lan2"; + }; + + port@2 { + reg = <2>; + label = "lan3"; + }; + + port@3 { + reg = <3>; + label = "lan4"; + }; + + port@4 { + reg = <4>; + label = "wan"; + }; + + port@8 { + reg = <8>; + label = "cpu"; + ethernet = <&gmac2>; + phy-mode = "rgmii"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts index 86c7cc0fa70e..d9a16a820e7f 100644 --- a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts +++ b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts @@ -52,19 +52,19 @@ leds { compatible = "gpio-leds"; - wps { + led-wps { label = "bcm53xx:white:wps"; gpios = <&chipcommon 22 GPIO_ACTIVE_LOW>; }; - usb2 { + led-usb2 { label = "bcm53xx:green:usb2"; gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>; trigger-sources = <&ohci_port2>, <&ehci_port2>; linux,default-trigger = "usbport"; }; - usb3 { + led-usb3 { label = "bcm53xx:green:usb3"; gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>; trigger-sources = <&ohci_port1>, <&ehci_port1>, @@ -72,58 +72,58 @@ linux,default-trigger = "usbport"; }; - power { + led-power { label = "bcm53xx:white:power"; gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>; linux,default-trigger = "default-on"; }; - wifi-disabled { + led-wifi-disabled { label = "bcm53xx:amber:wifi-disabled"; gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>; }; - wifi-enabled { + led-wifi-enabled { label = "bcm53xx:white:wifi-enabled"; gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>; }; - bluebar1 { + led-bluebar1 { label = "bcm53xx:white:bluebar1"; gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>; }; - bluebar2 { + led-bluebar2 { label = "bcm53xx:white:bluebar2"; gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>; }; - bluebar3 { + led-bluebar3 { label = "bcm53xx:white:bluebar3"; gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>; }; - bluebar4 { + led-bluebar4 { label = "bcm53xx:white:bluebar4"; gpios = <&chipcommon 18 GPIO_ACTIVE_HIGH>; }; - bluebar5 { + led-bluebar5 { label = "bcm53xx:white:bluebar5"; gpios = <&chipcommon 19 GPIO_ACTIVE_HIGH>; }; - bluebar6 { + led-bluebar6 { label = "bcm53xx:white:bluebar6"; gpios = <&chipcommon 20 GPIO_ACTIVE_HIGH>; }; - bluebar7 { + led-bluebar7 { label = "bcm53xx:white:bluebar7"; gpios = <&chipcommon 21 GPIO_ACTIVE_HIGH>; }; - bluebar8 { + led-bluebar8 { label = "bcm53xx:white:bluebar8"; gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts b/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts index 9ad15bcae1ca..41a0722fa64a 100644 --- a/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts +++ b/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts @@ -30,13 +30,13 @@ leds { compatible = "gpio-leds"; - status { + led-status { label = "bcm53xx:green:status"; gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>; linux,default-trigger = "timer"; }; - usb3 { + led-usb3 { label = "bcm53xx:green:usb3"; gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>; trigger-sources = <&ohci_port1>, <&ehci_port1>, diff --git a/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts b/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts index ee24d3768536..c56c7e366848 100644 --- a/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts +++ b/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts @@ -23,18 +23,18 @@ leds { compatible = "gpio-leds"; - status { + led-status { label = "bcm53xx:green:status"; gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>; linux,default-trigger = "timer"; }; - 2ghz { + led-2ghz { label = "bcm53xx:blue:2ghz"; gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>; }; - 5ghz { + led-5ghz { label = "bcm53xx:blue:5ghz"; gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; }; diff --git a/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts b/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts index 6549d07b9887..1b5c91a524ac 100644 --- a/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts +++ b/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts @@ -30,13 +30,13 @@ leds { compatible = "gpio-leds"; - status { + led-status { label = "bcm53xx:green:status"; gpios = <&chipcommon 20 GPIO_ACTIVE_HIGH>; linux,default-trigger = "timer"; }; - usb3 { + led-usb3 { label = "bcm53xx:green:usb3"; gpios = <&chipcommon 19 GPIO_ACTIVE_HIGH>; trigger-sources = <&ohci_port1>, <&ehci_port1>, diff --git a/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts b/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts index 654fcce9fded..739063b77b1f 100644 --- a/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts +++ b/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts @@ -25,7 +25,7 @@ leds { compatible = "gpio-leds"; - status { + led-status { label = "bcm53xx:green:status"; gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>; linux,default-trigger = "timer"; diff --git a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts index bf053a2fcc7c..7afc68d5d2c2 100644 --- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts +++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts @@ -30,38 +30,38 @@ leds { compatible = "gpio-leds"; - power { + led-power { label = "bcm53xx:green:power"; gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>; linux,default-trigger = "default-on"; }; - lan3 { + led-lan3 { label = "bcm53xx:green:lan3"; gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>; }; - lan4 { + led-lan4 { label = "bcm53xx:green:lan4"; gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>; }; - wan { + led-wan { label = "bcm53xx:green:wan"; gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; }; - lan1 { + led-lan1 { label = "bcm53xx:green:lan1"; gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>; }; - lan2 { + led-lan2 { label = "bcm53xx:green:lan2"; gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>; }; - usb3 { + led-usb3 { label = "bcm53xx:green:usb3"; gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>; trigger-sources = <&ohci_port1>, <&ehci_port1>, @@ -69,18 +69,18 @@ linux,default-trigger = "usbport"; }; - status { + led-status { label = "bcm53xx:green:status"; gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>; linux,default-trigger = "timer"; }; - 2ghz { + led-2ghz { label = "bcm53xx:green:2ghz"; gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>; }; - 5ghz { + led-5ghz { label = "bcm53xx:green:5ghz"; gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; }; diff --git a/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts b/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts index 78a90dd57a4e..60a2c441d5bd 100644 --- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts +++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts @@ -33,13 +33,13 @@ leds { compatible = "gpio-leds"; - power { + led-power { label = "bcm53xx:green:power"; gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>; linux,default-trigger = "default-on"; }; - usb3 { + led-usb3 { label = "bcm53xx:green:usb3"; gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>; trigger-sources = <&ohci_port1>, <&ehci_port1>, @@ -47,18 +47,18 @@ linux,default-trigger = "usbport"; }; - status { + led-status { label = "bcm53xx:green:status"; gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>; linux,default-trigger = "timer"; }; - 2ghz { + led-2ghz { label = "bcm53xx:green:2ghz"; gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>; }; - 5ghz { + led-5ghz { label = "bcm53xx:green:5ghz"; gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; }; diff --git a/arch/arm/boot/dts/bcm47094-netgear-r8500.dts b/arch/arm/boot/dts/bcm47094-netgear-r8500.dts index f850dce37b20..76d562610654 100644 --- a/arch/arm/boot/dts/bcm47094-netgear-r8500.dts +++ b/arch/arm/boot/dts/bcm47094-netgear-r8500.dts @@ -25,38 +25,38 @@ leds { compatible = "gpio-leds"; - power0 { + led-power0 { label = "bcm53xx:white:power"; gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>; linux,default-trigger = "default-on"; }; - power1 { + led-power1 { label = "bcm53xx:amber:power"; gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; }; - 5ghz-1 { + led-5ghz-1 { label = "bcm53xx:white:5ghz-1"; gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; }; - 5ghz-2 { + led-5ghz-2 { label = "bcm53xx:white:5ghz-2"; gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>; }; - 2ghz { + led-2ghz { label = "bcm53xx:white:2ghz"; gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>; }; - usb2 { + led-usb2 { label = "bcm53xx:white:usb2"; gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; }; - usb3 { + led-usb3 { label = "bcm53xx:white:usb3"; gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>; }; diff --git a/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts b/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts index e20b6d2eb274..0734aa249b8e 100644 --- a/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts +++ b/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts @@ -23,13 +23,13 @@ leds { compatible = "gpio-leds"; - wlan { + led-wlan { label = "bcm53xx:blue:wlan"; gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>; linux,default-trigger = "default-off"; }; - system { + led-system { label = "bcm53xx:green:system"; gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; linux,default-trigger = "timer"; diff --git a/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts b/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts index 9d863570fcf3..e6fb6cbe6963 100644 --- a/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts +++ b/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts @@ -20,26 +20,26 @@ reg = <0x00000000 0x08000000>; }; - leds { + leds-0 { compatible = "gpio-leds"; - 5ghz { + led-5ghz { label = "bcm53xx:blue:5ghz"; gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>; linux,default-trigger = "default-off"; }; - system { + led-system { label = "bcm53xx:green:system"; gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>; linux,default-trigger = "timer"; }; }; - pcie0_leds { + leds-1 { compatible = "gpio-leds"; - 2ghz { + led-2ghz { label = "bcm53xx:blue:2ghz"; gpios = <&pcie0_chipcommon 3 GPIO_ACTIVE_HIGH>; linux,default-trigger = "default-off"; diff --git a/arch/arm/boot/dts/bcm47189-tenda-ac9.dts b/arch/arm/boot/dts/bcm47189-tenda-ac9.dts index 55b92645b0f1..dab2e5f63a72 100644 --- a/arch/arm/boot/dts/bcm47189-tenda-ac9.dts +++ b/arch/arm/boot/dts/bcm47189-tenda-ac9.dts @@ -20,37 +20,37 @@ reg = <0x00000000 0x08000000>; }; - leds { + leds-0 { compatible = "gpio-leds"; - usb { + led-usb { label = "bcm53xx:blue:usb"; gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>; trigger-sources = <&ohci_port1>, <&ehci_port1>; linux,default-trigger = "usbport"; }; - wps { + led-wps { label = "bcm53xx:blue:wps"; gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>; }; - 5ghz { + led-5ghz { label = "bcm53xx:blue:5ghz"; gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>; }; - system { + led-system { label = "bcm53xx:blue:system"; gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>; linux,default-trigger = "timer"; }; }; - pcie0_leds { + leds-1 { compatible = "gpio-leds"; - 2ghz { + led-2ghz { label = "bcm53xx:blue:2ghz"; gpios = <&pcie0_chipcommon 3 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm/boot/dts/bcm47622.dtsi b/arch/arm/boot/dts/bcm47622.dtsi index 2df04528af82..f4b2db9bc4ab 100644 --- a/arch/arm/boot/dts/bcm47622.dtsi +++ b/arch/arm/boot/dts/bcm47622.dtsi @@ -51,6 +51,7 @@ L2_0: l2-cache0 { compatible = "cache"; + cache-level = <2>; }; }; diff --git a/arch/arm/boot/dts/bcm53016-dlink-dwl-8610ap.dts b/arch/arm/boot/dts/bcm53016-dlink-dwl-8610ap.dts new file mode 100644 index 000000000000..c1f54391746f --- /dev/null +++ b/arch/arm/boot/dts/bcm53016-dlink-dwl-8610ap.dts @@ -0,0 +1,131 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/dts-v1/; + +#include "bcm4709.dtsi" +#include "bcm5301x-nand-cs0-bch8.dtsi" +#include <dt-bindings/leds/common.h> +#include <dt-bindings/input/input.h> + +/ { + model = "D-Link DWL-8610AP"; + compatible = "dlink,dwl-8610ap", "brcm,bcm53016", "brcm,bcm4708"; + + memory@0 { + device_type = "memory"; + /* 512 MB RAM in 2 x Macronix D9PSH chips */ + reg = <0x00000000 0x08000000>, + <0x88000000 0x08000000>; + }; + + leds { + compatible = "gpio-leds"; + + led-power { + function = LED_FUNCTION_POWER; + color = <LED_COLOR_ID_GREEN>; + gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>; + default-state = "on"; + }; + + led-diag { + /* Actually "diag" unclear what this means */ + function = LED_FUNCTION_INDICATOR; + color = <LED_COLOR_ID_RED>; + gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>; + default-state = "on"; + linux,default-trigger = "heartbeat"; + }; + + led-wlan-2g { + function = LED_FUNCTION_WLAN; + color = <LED_COLOR_ID_GREEN>; + gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>; + }; + + led-wlan-5g { + function = LED_FUNCTION_WLAN; + color = <LED_COLOR_ID_GREEN>; + gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + + button-reset { + debounce-interval = <100>; + wakeup-source; + linux,code = <KEY_RESTART>; + label = "reset"; + /* This GPIO is actually stored in NVRAM, but it's not gonna change */ + gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>; + }; + }; + + /* + * Flash memory at 0x1e000000-0x1fffffff + * Macronix 32 64KB blocks; total size 2MB, same that can be + * found attached to the spi_nor SPI controller. + */ + nvram@1e080000 { + compatible = "brcm,nvram"; + reg = <0x1e080000 0x00020000>; + + et0macaddr: et0macaddr { + }; + + et1macaddr: et1macaddr { + }; + }; +}; + +&gmac0 { + nvmem-cells = <&et0macaddr>; + nvmem-cell-names = "mac-address"; +}; + +&gmac1 { + nvmem-cells = <&et1macaddr>; + nvmem-cell-names = "mac-address"; +}; + +&spi_nor { + /* Serial SPI NOR Flash MX 25L1606E */ + status = "okay"; +}; + +&nandcs { + /* + * Spansion S34ML01G100TFI00 128 MB NAND Flash memory + * + * This ECC is a bit unorthodox but it is what the stock firmware + * is using, so to be able to mount the original partitions + * this is necessary. + */ + nand-ecc-strength = <5>; + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + /* This is named nflash1.trx in CFE */ + trx@0 { + label = "firmware"; + reg = <0x00000000 0x02800000>; + compatible = "brcm,trx"; + }; + + /* This is named nflash1.trx2 in CFE */ + trx2@2800000 { + label = "firmware2"; + reg = <0x02800000 0x02800000>; + compatible = "brcm,trx"; + }; + + /* This is named nflash1.rwfs in CFE */ + free@5000000 { + label = "free"; + reg = <0x05000000 0x03000000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm53016-meraki-mr32.dts b/arch/arm/boot/dts/bcm53016-meraki-mr32.dts index e678bc03d816..46c2c93b01d8 100644 --- a/arch/arm/boot/dts/bcm53016-meraki-mr32.dts +++ b/arch/arm/boot/dts/bcm53016-meraki-mr32.dts @@ -58,7 +58,7 @@ pwm-leds { compatible = "pwm-leds"; - red { + led-0 { /* SYS-LED 1 - Tricolor */ function = LED_FUNCTION_INDICATOR; color = <LED_COLOR_ID_RED>; @@ -66,7 +66,7 @@ max-brightness = <255>; }; - green { + led-1 { /* SYS-LED 1 - Tricolor */ function = LED_FUNCTION_POWER; color = <LED_COLOR_ID_GREEN>; @@ -74,7 +74,7 @@ max-brightness = <255>; }; - blue { + led-2 { /* SYS-LED 1 - Tricolor */ function = LED_FUNCTION_INDICATOR; color = <LED_COLOR_ID_BLUE>; diff --git a/arch/arm/boot/dts/bcm63148.dtsi b/arch/arm/boot/dts/bcm63148.dtsi index df5307b6b3af..7cd55d64de71 100644 --- a/arch/arm/boot/dts/bcm63148.dtsi +++ b/arch/arm/boot/dts/bcm63148.dtsi @@ -35,6 +35,7 @@ L2_0: l2-cache0 { compatible = "cache"; + cache-level = <2>; }; }; diff --git a/arch/arm/boot/dts/bcm63178.dtsi b/arch/arm/boot/dts/bcm63178.dtsi index cbd094dde6d0..043e699cbc27 100644 --- a/arch/arm/boot/dts/bcm63178.dtsi +++ b/arch/arm/boot/dts/bcm63178.dtsi @@ -43,6 +43,7 @@ L2_0: l2-cache0 { compatible = "cache"; + cache-level = <2>; }; }; diff --git a/arch/arm/boot/dts/bcm6756.dtsi b/arch/arm/boot/dts/bcm6756.dtsi index ce1b59faf800..5c72219bc194 100644 --- a/arch/arm/boot/dts/bcm6756.dtsi +++ b/arch/arm/boot/dts/bcm6756.dtsi @@ -51,6 +51,7 @@ L2_0: l2-cache0 { compatible = "cache"; + cache-level = <2>; }; }; diff --git a/arch/arm/boot/dts/bcm6846.dtsi b/arch/arm/boot/dts/bcm6846.dtsi index 8aa47a2583b2..81513a793815 100644 --- a/arch/arm/boot/dts/bcm6846.dtsi +++ b/arch/arm/boot/dts/bcm6846.dtsi @@ -35,6 +35,7 @@ L2_0: l2-cache0 { compatible = "cache"; + cache-level = <2>; }; }; diff --git a/arch/arm/boot/dts/bcm6855.dtsi b/arch/arm/boot/dts/bcm6855.dtsi index 620f51aee1a2..5fa5feac0e29 100644 --- a/arch/arm/boot/dts/bcm6855.dtsi +++ b/arch/arm/boot/dts/bcm6855.dtsi @@ -43,6 +43,7 @@ L2_0: l2-cache0 { compatible = "cache"; + cache-level = <2>; }; }; diff --git a/arch/arm/boot/dts/bcm6878.dtsi b/arch/arm/boot/dts/bcm6878.dtsi index 1e8b5fa96c25..4ec836ac4baf 100644 --- a/arch/arm/boot/dts/bcm6878.dtsi +++ b/arch/arm/boot/dts/bcm6878.dtsi @@ -35,6 +35,7 @@ L2_0: l2-cache0 { compatible = "cache"; + cache-level = <2>; }; }; diff --git a/arch/arm/boot/dts/bcm947189acdbmr.dts b/arch/arm/boot/dts/bcm947189acdbmr.dts index 16e70a264faf..3709baa2376f 100644 --- a/arch/arm/boot/dts/bcm947189acdbmr.dts +++ b/arch/arm/boot/dts/bcm947189acdbmr.dts @@ -25,17 +25,17 @@ leds { compatible = "gpio-leds"; - wps { + led-wps { label = "bcm53xx:blue:wps"; gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>; }; - 5ghz { + led-5ghz { label = "bcm53xx:blue:5ghz"; gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>; }; - 2ghz { + led-2ghz { label = "bcm53xx:blue:2ghz"; gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi index 00a36fba2fd2..9aee3cfd3e98 100644 --- a/arch/arm/boot/dts/dove.dtsi +++ b/arch/arm/boot/dts/dove.dtsi @@ -139,7 +139,7 @@ pcie1: pcie@2 { device_type = "pci"; status = "disabled"; - assigned-addresses = <0x82002800 0 0x80000 0 0x2000>; + assigned-addresses = <0x82001000 0 0x80000 0 0x2000>; reg = <0x1000 0 0 0 0>; clocks = <&gate_clk 5>; marvell,pcie-port = <1>; diff --git a/arch/arm/boot/dts/dra7-evm-common.dtsi b/arch/arm/boot/dts/dra7-evm-common.dtsi index 68c43eb12c1a..4cdffd6db740 100644 --- a/arch/arm/boot/dts/dra7-evm-common.dtsi +++ b/arch/arm/boot/dts/dra7-evm-common.dtsi @@ -151,7 +151,7 @@ */ partition@0 { label = "QSPI.SPL"; - reg = <0x00000000 0x000010000>; + reg = <0x00000000 0x00010000>; }; partition@1 { label = "QSPI.SPL.backup1"; diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts index 87deb6a76eff..8cbcf55a5a33 100644 --- a/arch/arm/boot/dts/dra7-evm.dts +++ b/arch/arm/boot/dts/dra7-evm.dts @@ -483,7 +483,7 @@ #size-cells = <1>; partition@0 { label = "NAND.SPL"; - reg = <0x00000000 0x000020000>; + reg = <0x00000000 0x00020000>; }; partition@1 { label = "NAND.SPL.backup1"; diff --git a/arch/arm/boot/dts/dra72-evm-common.dtsi b/arch/arm/boot/dts/dra72-evm-common.dtsi index 8948e10dbeb8..c79ba671ec2b 100644 --- a/arch/arm/boot/dts/dra72-evm-common.dtsi +++ b/arch/arm/boot/dts/dra72-evm-common.dtsi @@ -356,7 +356,7 @@ #size-cells = <1>; partition@0 { label = "NAND.SPL"; - reg = <0x00000000 0x000020000>; + reg = <0x00000000 0x00020000>; }; partition@1 { label = "NAND.SPL.backup1"; @@ -490,7 +490,7 @@ */ partition@0 { label = "QSPI.SPL"; - reg = <0x00000000 0x000010000>; + reg = <0x00000000 0x00010000>; }; partition@1 { label = "QSPI.SPL.backup1"; diff --git a/arch/arm/boot/dts/e60k02.dtsi b/arch/arm/boot/dts/e60k02.dtsi index 935e2359f8df..94944cc21931 100644 --- a/arch/arm/boot/dts/e60k02.dtsi +++ b/arch/arm/boot/dts/e60k02.dtsi @@ -104,7 +104,16 @@ clock-frequency = <100000>; status = "okay"; - /* TODO: CYTTSP5 touch controller at 0x24 */ + touchscreen@24 { + compatible = "cypress,tt21000"; + reg = <0x24>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_cyttsp5_gpio>; + interrupt-parent = <&gpio5>; + interrupts = <6 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>; + vdd-supply = <&ldo5_reg>; + }; /* TODO: TPS65185 PMIC for E Ink at 0x68 */ diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi index 326b9e0ed8d3..a2d6ee7fff08 100644 --- a/arch/arm/boot/dts/exynos3250.dtsi +++ b/arch/arm/boot/dts/exynos3250.dtsi @@ -485,7 +485,7 @@ }; mfc: codec@13400000 { - compatible = "samsung,mfc-v7"; + compatible = "samsung,exynos3250-mfc", "samsung,mfc-v7"; reg = <0x13400000 0x10000>; interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; clock-names = "mfc", "sclk_mfc"; diff --git a/arch/arm/boot/dts/imx6dl-colibri-aster.dts b/arch/arm/boot/dts/imx6dl-colibri-aster.dts index 74e8a6cd8bed..a28e083f29d5 100644 --- a/arch/arm/boot/dts/imx6dl-colibri-aster.dts +++ b/arch/arm/boot/dts/imx6dl-colibri-aster.dts @@ -99,7 +99,6 @@ }; &usbh1 { - vbus-supply = <®_usb_host_vbus>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts b/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts index 7272edd85a49..a02981d4a3fc 100644 --- a/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts +++ b/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts @@ -111,7 +111,6 @@ }; &usbh1 { - vbus-supply = <®_usb_host_vbus>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6dl-colibri-iris.dts b/arch/arm/boot/dts/imx6dl-colibri-iris.dts index cf77d894f6d7..c5797ff35b71 100644 --- a/arch/arm/boot/dts/imx6dl-colibri-iris.dts +++ b/arch/arm/boot/dts/imx6dl-colibri-iris.dts @@ -138,7 +138,6 @@ }; &usbh1 { - vbus-supply = <®_usb_host_vbus>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6q-prti6q.dts b/arch/arm/boot/dts/imx6q-prti6q.dts index b4605edfd2ab..d8fa83effd63 100644 --- a/arch/arm/boot/dts/imx6q-prti6q.dts +++ b/arch/arm/boot/dts/imx6q-prti6q.dts @@ -364,8 +364,8 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_wifi>; interrupts-extended = <&gpio1 30 IRQ_TYPE_LEVEL_HIGH>; - ref-clock-frequency = "38400000"; - tcxo-clock-frequency = "19200000"; + ref-clock-frequency = <38400000>; + tcxo-clock-frequency = <19200000>; }; }; diff --git a/arch/arm/boot/dts/imx6q-yapp4-crux.dts b/arch/arm/boot/dts/imx6q-yapp4-crux.dts index 15f4824a5142..bddf3822ebf7 100644 --- a/arch/arm/boot/dts/imx6q-yapp4-crux.dts +++ b/arch/arm/boot/dts/imx6q-yapp4-crux.dts @@ -33,6 +33,10 @@ status = "okay"; }; +®_pu { + regulator-always-on; +}; + ®_usb_h1_vbus { status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-colibri.dtsi b/arch/arm/boot/dts/imx6qdl-colibri.dtsi index 023e76215064..d8f985f297e4 100644 --- a/arch/arm/boot/dts/imx6qdl-colibri.dtsi +++ b/arch/arm/boot/dts/imx6qdl-colibri.dtsi @@ -24,6 +24,13 @@ status = "disabled"; }; + extcon_usbc_det: usbc-det { + compatible = "linux,extcon-usb-gpio"; + id-gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>; /* SODIMM 137 / USBC_DET */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbc_det>; + }; + gpio-keys { compatible = "gpio-keys"; pinctrl-names = "default"; @@ -105,7 +112,7 @@ reg_usb_host_vbus: regulator-usb-host-vbus { compatible = "regulator-fixed"; - gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>; /* USBH_PEN */ + gpio = <&gpio3 31 GPIO_ACTIVE_LOW>; /* SODIMM 129 / USBH_PEN */ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_regulator_usbh_pwr>; regulator-max-microvolt = <5000000>; @@ -670,9 +677,16 @@ status = "disabled"; }; +/* Colibri USBH */ +&usbh1 { + vbus-supply = <®_usb_host_vbus>; +}; + +/* Colibri USBC */ &usbotg { disable-over-current; - dr_mode = "peripheral"; + dr_mode = "otg"; + extcon = <0>, <&extcon_usbc_det>; status = "disabled"; }; @@ -986,7 +1000,7 @@ pinctrl_regulator_usbh_pwr: gpioregusbhpwrgrp { fsl,pins = < - /* USBH_EN */ + /* SODIMM 129 / USBH_PEN */ MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x0f058 >; }; @@ -1055,7 +1069,7 @@ pinctrl_usbc_det: usbcdetgrp { fsl,pins = < - /* USBC_DET */ + /* SODIMM 137 / USBC_DET */ MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0 /* USBC_DET_OVERWRITE */ MX6QDL_PAD_RGMII_RXC__GPIO6_IO30 0x0f058 diff --git a/arch/arm/boot/dts/imx6qdl-gw5910.dtsi b/arch/arm/boot/dts/imx6qdl-gw5910.dtsi index 68e5ab2e27e2..6bb4855d13ce 100644 --- a/arch/arm/boot/dts/imx6qdl-gw5910.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw5910.dtsi @@ -29,7 +29,7 @@ user-pb { label = "user_pb"; - gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>; + gpios = <&gsc_gpio 2 GPIO_ACTIVE_LOW>; linux,code = <BTN_0>; }; diff --git a/arch/arm/boot/dts/imx6qdl-gw5913.dtsi b/arch/arm/boot/dts/imx6qdl-gw5913.dtsi index 8e23cec7149e..696427b487f0 100644 --- a/arch/arm/boot/dts/imx6qdl-gw5913.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw5913.dtsi @@ -26,7 +26,7 @@ user-pb { label = "user_pb"; - gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>; + gpios = <&gsc_gpio 2 GPIO_ACTIVE_LOW>; linux,code = <BTN_0>; }; diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi index 22f8e2783cdf..12573e1f917c 100644 --- a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi @@ -14,6 +14,11 @@ stdout-path = &uart2; }; + aliases { + mmc0 = &usdhc3; + mmc1 = &usdhc4; + }; + memory@10000000 { device_type = "memory"; reg = <0x10000000 0x40000000>; diff --git a/arch/arm/boot/dts/imx6qp-yapp4-crux-plus.dts b/arch/arm/boot/dts/imx6qp-yapp4-crux-plus.dts index cea165f2161a..afaf4a6759d4 100644 --- a/arch/arm/boot/dts/imx6qp-yapp4-crux-plus.dts +++ b/arch/arm/boot/dts/imx6qp-yapp4-crux-plus.dts @@ -33,6 +33,10 @@ status = "okay"; }; +®_pu { + regulator-always-on; +}; + ®_usb_h1_vbus { status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6sl-kobo-aura2.dts b/arch/arm/boot/dts/imx6sl-kobo-aura2.dts new file mode 100644 index 000000000000..657d0f1b6115 --- /dev/null +++ b/arch/arm/boot/dts/imx6sl-kobo-aura2.dts @@ -0,0 +1,555 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device tree for the Kobo Aura 2 ebook reader + * + * Name on mainboard is: 37NB-E60QL0+4B1 + * Serials start with: E60QL2 + * + * Copyright 2022 Andreas Kemnade + */ + +/dts-v1/; + +#include <dt-bindings/input/input.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> +#include "imx6sl.dtsi" + +/ { + model = "Kobo Aura 2"; + compatible = "kobo,aura2", "fsl,imx6sl"; + + aliases { + mmc0 = &usdhc2; + mmc1 = &usdhc3; + }; + + chosen { + stdout-path = &uart1; + }; + + gpio_keys: gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_keys>; + + key-cover { + label = "Cover"; + gpios = <&gpio5 12 GPIO_ACTIVE_LOW>; + linux,code = <SW_LID>; + linux,input-type = <EV_SW>; + wakeup-source; + }; + + key-power { + label = "Power"; + gpios = <&gpio5 8 GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; + wakeup-source; + }; + }; + + leds: leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_led>; + + led-0 { + label = "koboaura2:white:on"; + gpios = <&gpio5 7 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_WHITE>; + linux,default-trigger = "timer"; + }; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x10000000>; + }; + + reg_wifi: regulator-wifi { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wifi_power>; + regulator-name = "SD3_SPWR"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + gpio = <&gpio4 29 GPIO_ACTIVE_LOW>; + }; + + wifi_pwrseq: wifi-pwrseq { + compatible = "mmc-pwrseq-simple"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wifi_reset>; + post-power-on-delay-ms = <20>; + reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; + }; +}; + +&i2c1 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&pinctrl_i2c1>; + pinctrl-1 = <&pinctrl_i2c1_sleep>; + status = "okay"; + + lm3630a: backlight@36 { + compatible = "ti,lm3630a"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lm3630a_bl_gpio>; + reg = <0x36>; + enable-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>; + + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + led-sources = <0>; + label = "backlight"; + default-brightness = <0>; + max-brightness = <255>; + }; + }; +}; + +&i2c2 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&pinctrl_i2c2>; + pinctrl-1 = <&pinctrl_i2c2_sleep>; + clock-frequency = <100000>; + status = "okay"; + + /* eKTF2232 at 0x15 */ + /* FP9928 at 0x48 */ +}; + +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + clock-frequency = <400000>; + status = "okay"; + + ricoh619: pmic@32 { + compatible = "ricoh,rc5t619"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ricoh_gpio>; + reg = <0x32>; + interrupt-parent = <&gpio5>; + interrupts = <11 IRQ_TYPE_LEVEL_LOW>; + system-power-controller; + + regulators { + dcdc1_reg: DCDC1 { + regulator-name = "DCDC1"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-max-microvolt = <900000>; + regulator-suspend-min-microvolt = <900000>; + }; + }; + + /* Core3_3V3 */ + dcdc2_reg: DCDC2 { + regulator-name = "DCDC2"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-max-microvolt = <3100000>; + regulator-suspend-min-microvolt = <3100000>; + }; + }; + + dcdc3_reg: DCDC3 { + regulator-name = "DCDC3"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-max-microvolt = <1140000>; + regulator-suspend-min-microvolt = <1140000>; + }; + }; + + /* Core4_1V2 */ + dcdc4_reg: DCDC4 { + regulator-name = "DCDC4"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-max-microvolt = <1140000>; + regulator-suspend-min-microvolt = <1140000>; + }; + }; + + /* Core4_1V8 */ + dcdc5_reg: DCDC5 { + regulator-name = "DCDC5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-max-microvolt = <1700000>; + regulator-suspend-min-microvolt = <1700000>; + }; + }; + + /* IR_3V3 */ + ldo1_reg: LDO1 { + regulator-name = "LDO1"; + regulator-always-on; + regulator-boot-on; + }; + + /* Core1_3V3 */ + ldo2_reg: LDO2 { + regulator-name = "LDO2"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-max-microvolt = <3000000>; + regulator-suspend-min-microvolt = <3000000>; + }; + }; + + /* Core5_1V2 */ + ldo3_reg: LDO3 { + regulator-name = "LDO3"; + regulator-always-on; + regulator-boot-on; + }; + + ldo4_reg: LDO4 { + regulator-name = "LDO4"; + regulator-boot-on; + }; + + /* SPD_3V3 */ + ldo5_reg: LDO5 { + regulator-name = "LDO5"; + regulator-always-on; + regulator-boot-on; + }; + + /* DDR_0V6 */ + ldo6_reg: LDO6 { + regulator-name = "LDO6"; + regulator-always-on; + regulator-boot-on; + }; + + /* VDD_PWM */ + ldo7_reg: LDO7 { + regulator-name = "LDO7"; + regulator-always-on; + regulator-boot-on; + }; + + /* ldo_1v8 */ + ldo8_reg: LDO8 { + regulator-name = "LDO8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo9_reg: LDO9 { + regulator-name = "LDO9"; + regulator-boot-on; + }; + + ldo10_reg: LDO10 { + regulator-name = "LDO10"; + regulator-boot-on; + }; + + ldortc1_reg: LDORTC1 { + regulator-name = "LDORTC1"; + regulator-always-on; + regulator-boot-on; + }; + }; + }; +}; + +®_vdd1p1 { + vin-supply = <&dcdc2_reg>; +}; + +®_vdd2p5 { + vin-supply = <&dcdc2_reg>; +}; + +®_arm { + vin-supply = <&dcdc3_reg>; +}; + +®_soc { + vin-supply = <&dcdc1_reg>; +}; + +®_pu { + vin-supply = <&dcdc1_reg>; +}; + +&snvs_rtc { + /* + * We are using the RTC in the PMIC, but this one is not disabled + * in imx6sl.dtsi. + */ + status = "disabled"; +}; + +&uart1 { + /* J4, through-holes */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart4 { + /* TP198, next to J4, SMD pads */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep"; + pinctrl-0 = <&pinctrl_usdhc2>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>; + pinctrl-3 = <&pinctrl_usdhc2_sleep>; + non-removable; + status = "okay"; + + /* internal uSD card */ +}; + +&usdhc3 { + pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + pinctrl-3 = <&pinctrl_usdhc3_sleep>; + vmmc-supply = <®_wifi>; + mmc-pwrseq = <&wifi_pwrseq>; + cap-power-off-card; + non-removable; + status = "okay"; + + /* + * RTL8189F SDIO WiFi + */ +}; + +&usbotg1 { + disable-over-current; + srp-disable; + hnp-disable; + adp-disable; + status = "okay"; +}; + +&iomuxc { + pinctrl_gpio_keys: gpio-keysgrp { + fsl,pins = < + MX6SL_PAD_SD1_DAT1__GPIO5_IO08 0x17059 + MX6SL_PAD_SD1_DAT4__GPIO5_IO12 0x17059 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6SL_PAD_I2C1_SCL__I2C1_SCL 0x4001f8b1 + MX6SL_PAD_I2C1_SDA__I2C1_SDA 0x4001f8b1 + >; + }; + + pinctrl_i2c1_sleep: i2c1-sleepgrp { + fsl,pins = < + MX6SL_PAD_I2C1_SCL__I2C1_SCL 0x400108b1 + MX6SL_PAD_I2C1_SDA__I2C1_SDA 0x400108b1 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6SL_PAD_I2C2_SCL__I2C2_SCL 0x4001f8b1 + MX6SL_PAD_I2C2_SDA__I2C2_SDA 0x4001f8b1 + >; + }; + + pinctrl_i2c2_sleep: i2c2-sleepgrp { + fsl,pins = < + MX6SL_PAD_I2C2_SCL__I2C2_SCL 0x400108b1 + MX6SL_PAD_I2C2_SDA__I2C2_SDA 0x400108b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6SL_PAD_REF_CLK_24M__I2C3_SCL 0x4001f8b1 + MX6SL_PAD_REF_CLK_32K__I2C3_SDA 0x4001f8b1 + >; + }; + + pinctrl_led: ledgrp { + fsl,pins = < + MX6SL_PAD_SD1_DAT6__GPIO5_IO07 0x17059 + >; + }; + + pinctrl_lm3630a_bl_gpio: lm3630a-bl-gpiogrp { + fsl,pins = < + MX6SL_PAD_EPDC_PWRCTRL3__GPIO2_IO10 0x10059 /* HWEN */ + >; + }; + + pinctrl_ricoh_gpio: ricoh-gpiogrp { + fsl,pins = < + MX6SL_PAD_SD1_CLK__GPIO5_IO15 0x1b8b1 /* ricoh619 chg */ + MX6SL_PAD_SD1_DAT0__GPIO5_IO11 0x1b8b1 /* ricoh619 irq */ + MX6SL_PAD_KEY_COL2__GPIO3_IO28 0x1b8b1 /* ricoh619 bat_low_int */ + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6SL_PAD_UART1_TXD__UART1_TX_DATA 0x1b0b1 + MX6SL_PAD_UART1_RXD__UART1_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX6SL_PAD_KEY_ROW6__UART4_TX_DATA 0x1b0b1 + MX6SL_PAD_KEY_COL6__UART4_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_usbotg1: usbotg1grp { + fsl,pins = < + MX6SL_PAD_EPDC_PWRCOM__USB_OTG1_ID 0x17059 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6SL_PAD_SD2_CMD__SD2_CMD 0x17059 + MX6SL_PAD_SD2_CLK__SD2_CLK 0x13059 + MX6SL_PAD_SD2_DAT0__SD2_DATA0 0x17059 + MX6SL_PAD_SD2_DAT1__SD2_DATA1 0x17059 + MX6SL_PAD_SD2_DAT2__SD2_DATA2 0x17059 + MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x17059 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { + fsl,pins = < + MX6SL_PAD_SD2_CMD__SD2_CMD 0x170b9 + MX6SL_PAD_SD2_CLK__SD2_CLK 0x130b9 + MX6SL_PAD_SD2_DAT0__SD2_DATA0 0x170b9 + MX6SL_PAD_SD2_DAT1__SD2_DATA1 0x170b9 + MX6SL_PAD_SD2_DAT2__SD2_DATA2 0x170b9 + MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x170b9 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { + fsl,pins = < + MX6SL_PAD_SD2_CMD__SD2_CMD 0x170f9 + MX6SL_PAD_SD2_CLK__SD2_CLK 0x130f9 + MX6SL_PAD_SD2_DAT0__SD2_DATA0 0x170f9 + MX6SL_PAD_SD2_DAT1__SD2_DATA1 0x170f9 + MX6SL_PAD_SD2_DAT2__SD2_DATA2 0x170f9 + MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x170f9 + >; + }; + + pinctrl_usdhc2_sleep: usdhc2-sleepgrp { + fsl,pins = < + MX6SL_PAD_SD2_CMD__GPIO5_IO04 0x100f9 + MX6SL_PAD_SD2_CLK__GPIO5_IO05 0x100f9 + MX6SL_PAD_SD2_DAT0__GPIO5_IO01 0x100f9 + MX6SL_PAD_SD2_DAT1__GPIO4_IO30 0x100f9 + MX6SL_PAD_SD2_DAT2__GPIO5_IO03 0x100f9 + MX6SL_PAD_SD2_DAT3__GPIO4_IO28 0x100f9 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6SL_PAD_SD3_CMD__SD3_CMD 0x11059 + MX6SL_PAD_SD3_CLK__SD3_CLK 0x11059 + MX6SL_PAD_SD3_DAT0__SD3_DATA0 0x11059 + MX6SL_PAD_SD3_DAT1__SD3_DATA1 0x11059 + MX6SL_PAD_SD3_DAT2__SD3_DATA2 0x11059 + MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x11059 + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp { + fsl,pins = < + MX6SL_PAD_SD3_CMD__SD3_CMD 0x170b9 + MX6SL_PAD_SD3_CLK__SD3_CLK 0x170b9 + MX6SL_PAD_SD3_DAT0__SD3_DATA0 0x170b9 + MX6SL_PAD_SD3_DAT1__SD3_DATA1 0x170b9 + MX6SL_PAD_SD3_DAT2__SD3_DATA2 0x170b9 + MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x170b9 + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp { + fsl,pins = < + MX6SL_PAD_SD3_CMD__SD3_CMD 0x170f9 + MX6SL_PAD_SD3_CLK__SD3_CLK 0x170f9 + MX6SL_PAD_SD3_DAT0__SD3_DATA0 0x170f9 + MX6SL_PAD_SD3_DAT1__SD3_DATA1 0x170f9 + MX6SL_PAD_SD3_DAT2__SD3_DATA2 0x170f9 + MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x170f9 + >; + }; + + pinctrl_usdhc3_sleep: usdhc3-sleepgrp { + fsl,pins = < + MX6SL_PAD_SD3_CMD__GPIO5_IO21 0x100c1 + MX6SL_PAD_SD3_CLK__GPIO5_IO18 0x100c1 + MX6SL_PAD_SD3_DAT0__GPIO5_IO19 0x100c1 + MX6SL_PAD_SD3_DAT1__GPIO5_IO20 0x100c1 + MX6SL_PAD_SD3_DAT2__GPIO5_IO16 0x100c1 + MX6SL_PAD_SD3_DAT3__GPIO5_IO17 0x100c1 + >; + }; + + pinctrl_wifi_power: wifi-powergrp { + fsl,pins = < + MX6SL_PAD_SD2_DAT6__GPIO4_IO29 0x10059 /* WIFI_3V3_ON */ + >; + }; + + pinctrl_wifi_reset: wifi-resetgrp { + fsl,pins = < + MX6SL_PAD_SD2_DAT7__GPIO5_IO00 0x10059 /* WIFI_RST */ + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts b/arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts index 663ee9df79e6..da1399057634 100644 --- a/arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts +++ b/arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts @@ -18,6 +18,21 @@ model = "Tolino Shine 2 HD"; compatible = "kobo,tolino-shine2hd", "fsl,imx6sl"; + backlight { + compatible = "pwm-backlight"; + pwms = <&ec 0 50000>; + power-supply = <&backlight_regulator>; + }; + + backlight_regulator: regulator-backlight { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_backlight_power>; + regulator-name = "backlight"; + gpio = <&gpio2 10 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + chosen { stdout-path = &uart1; }; @@ -65,6 +80,12 @@ gpios = <&gpio5 13 GPIO_ACTIVE_LOW>; linux,default-trigger = "timer"; }; + + led-1 { + label = "tolinoshine2hd:white:backlightboost"; + gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "off"; + }; }; memory@80000000 { @@ -299,6 +320,12 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hog>; + pinctrl_backlight_power: backlight-powergrp { + fsl,pins = < + MX6SL_PAD_EPDC_PWRCTRL3__GPIO2_IO10 0x10059 + >; + }; + pinctrl_gpio_keys: gpio-keysgrp { fsl,pins = < MX6SL_PAD_SD1_DAT1__GPIO5_IO08 0x17059 @@ -383,7 +410,8 @@ pinctrl_led: ledgrp { fsl,pins = < - MX6SL_PAD_SD1_DAT2__GPIO5_IO13 0x17059 + MX6SL_PAD_SD1_DAT2__GPIO5_IO13 0x17059 + MX6SL_PAD_EPDC_SDCE2__GPIO1_IO29 0x17059 >; }; diff --git a/arch/arm/boot/dts/imx6sl-tolino-shine3.dts b/arch/arm/boot/dts/imx6sl-tolino-shine3.dts index e3f1e8d79528..db5d8509935f 100644 --- a/arch/arm/boot/dts/imx6sl-tolino-shine3.dts +++ b/arch/arm/boot/dts/imx6sl-tolino-shine3.dts @@ -52,6 +52,13 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hog>; + pinctrl_cyttsp5_gpio: cyttsp5-gpiogrp { + fsl,pins = < + MX6SL_PAD_SD1_DAT3__GPIO5_IO06 0x17059 /* TP_INT */ + MX6SL_PAD_SD1_DAT2__GPIO5_IO13 0x10059 /* TP_RST */ + >; + }; + pinctrl_gpio_keys: gpio-keysgrp { fsl,pins = < MX6SL_PAD_SD1_DAT1__GPIO5_IO08 0x17059 /* PWR_SW */ diff --git a/arch/arm/boot/dts/imx6sll-kobo-clarahd.dts b/arch/arm/boot/dts/imx6sll-kobo-clarahd.dts index 90b32f5eb529..c7cfe0b70f04 100644 --- a/arch/arm/boot/dts/imx6sll-kobo-clarahd.dts +++ b/arch/arm/boot/dts/imx6sll-kobo-clarahd.dts @@ -62,6 +62,13 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hog>; + pinctrl_cyttsp5_gpio: cyttsp5-gpiogrp { + fsl,pins = < + MX6SLL_PAD_SD1_DATA3__GPIO5_IO06 0x17059 /* TP_INT */ + MX6SLL_PAD_SD1_DATA2__GPIO5_IO13 0x10059 /* TP_RST */ + >; + }; + pinctrl_gpio_keys: gpio-keysgrp { fsl,pins = < MX6SLL_PAD_SD1_DATA1__GPIO5_IO08 0x17059 /* PWR_SW */ diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi index abc3572d699e..80f5efd65c2f 100644 --- a/arch/arm/boot/dts/imx6sx.dtsi +++ b/arch/arm/boot/dts/imx6sx.dtsi @@ -1391,7 +1391,7 @@ pwm8: pwm@22b0000 { compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm"; - reg = <0x0022b0000 0x4000>; + reg = <0x022b0000 0x4000>; interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6SX_CLK_PWM8>, <&clks IMX6SX_CLK_PWM8>; diff --git a/arch/arm/boot/dts/imx6ul-phytec-phycore-som.dtsi b/arch/arm/boot/dts/imx6ul-phytec-phycore-som.dtsi index 3cddc68917a0..5168ed0ffec3 100644 --- a/arch/arm/boot/dts/imx6ul-phytec-phycore-som.dtsi +++ b/arch/arm/boot/dts/imx6ul-phytec-phycore-som.dtsi @@ -102,6 +102,10 @@ status = "disabled"; }; +&wdog1 { + fsl,suspend-in-wait; +}; + &iomuxc { pinctrl_enet1: enet1grp { fsl,pins = < diff --git a/arch/arm/boot/dts/imx6ull-colibri-aster.dts b/arch/arm/boot/dts/imx6ull-colibri-aster.dts index d3f2fb7c6c1e..3e0897c3a296 100644 --- a/arch/arm/boot/dts/imx6ull-colibri-aster.dts +++ b/arch/arm/boot/dts/imx6ull-colibri-aster.dts @@ -15,6 +15,46 @@ "fsl,imx6ull"; }; +&ad7879_ts { + status = "okay"; +}; + &atmel_mxt_ts { status = "okay"; }; + +&backlight { + status = "okay"; +}; + +&i2c1 { + status = "okay"; +}; + +&i2c2 { + status = "okay"; +}; + +&lcdif { + status = "okay"; +}; + +&panel_dpi { + status = "okay"; +}; + +&pwm4 { + status = "okay"; +}; + +/* PWM <B> */ +&pwm5 { + /* Pin already used by atmel_mxt_ts touchscreen */ + status = "disabled"; +}; + +/* PWM <C> */ +&pwm6 { + /* Pin already used by atmel_mxt_ts touchscreen */ + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dts b/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dts index 9bf7111d7b00..d6da984e518d 100644 --- a/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dts +++ b/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dts @@ -12,3 +12,27 @@ model = "Toradex Colibri iMX6ULL 256/512MB on Colibri Evaluation Board V3"; compatible = "toradex,colibri-imx6ull-eval", "fsl,imx6ull"; }; + +&ad7879_ts { + status = "okay"; +}; + +&backlight { + status = "okay"; +}; + +&i2c2 { + status = "okay"; +}; + +&lcdif { + status = "okay"; +}; + +&panel_dpi { + status = "okay"; +}; + +&pwm4 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6ull-colibri-iris-v2.dts b/arch/arm/boot/dts/imx6ull-colibri-iris-v2.dts index afc1e0119783..f6b31118be17 100644 --- a/arch/arm/boot/dts/imx6ull-colibri-iris-v2.dts +++ b/arch/arm/boot/dts/imx6ull-colibri-iris-v2.dts @@ -15,13 +15,21 @@ "fsl,imx6ull"; }; +&ad7879_ts { + status = "okay"; +}; + &atmel_mxt_ts { status = "okay"; }; +&backlight { + status = "okay"; +}; + &gpio1 { /* This turns the LVDS transceiver on */ - lvds-power-on { + lvds-power-on-hog { gpio-hog; gpios = <14 GPIO_ACTIVE_HIGH>; /* SODIMM 99 */ line-name = "LVDS_POWER_ON"; @@ -34,7 +42,7 @@ * This switches the LVDS transceiver to the single-channel * output mode. */ - lvds-ch-mode { + lvds-ch-mode-hog { gpio-hog; gpios = <0 GPIO_ACTIVE_HIGH>; /* SODIMM 55 */ line-name = "LVDS_CH_MODE"; @@ -44,7 +52,7 @@ /* * This switches the LVDS transceiver to the 24-bit RGB mode. */ - lvds-rgb-mode { + lvds-rgb-mode-hog { gpio-hog; gpios = <1 GPIO_ACTIVE_HIGH>; /* SODIMM 63 */ line-name = "LVDS_RGB_MODE"; @@ -56,10 +64,42 @@ /* * This switches the LVDS transceiver to VESA color mapping mode. */ - lvds-color-map { + lvds-color-map-hog { gpio-hog; gpios = <3 GPIO_ACTIVE_HIGH>; /* SODIMM 95 */ line-name = "LVDS_COLOR_MAP"; output-low; }; }; + +&i2c1 { + status = "okay"; +}; + +&i2c2 { + status = "okay"; +}; + +&lcdif { + status = "okay"; +}; + +&panel_dpi { + status = "okay"; +}; + +&pwm4 { + status = "okay"; +}; + +/* PWM <B> */ +&pwm5 { + /* Pin already used by atmel_mxt_ts touchscreen */ + status = "disabled"; +}; + +/* PWM <C> */ +&pwm6 { + /* Pin already used by atmel_mxt_ts touchscreen */ + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/imx6ull-colibri-iris.dts b/arch/arm/boot/dts/imx6ull-colibri-iris.dts index 4fb97b0fe30b..2a0d0fc3b9d6 100644 --- a/arch/arm/boot/dts/imx6ull-colibri-iris.dts +++ b/arch/arm/boot/dts/imx6ull-colibri-iris.dts @@ -15,6 +15,26 @@ "fsl,imx6ull"; }; -&atmel_mxt_ts { +&ad7879_ts { + status = "okay"; +}; + +&backlight { + status = "okay"; +}; + +&i2c2 { + status = "okay"; +}; + +&lcdif { + status = "okay"; +}; + +&panel_dpi { + status = "okay"; +}; + +&pwm4 { status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6ull-colibri-iris.dtsi b/arch/arm/boot/dts/imx6ull-colibri-iris.dtsi index 7f3b37baba88..166a0aefc869 100644 --- a/arch/arm/boot/dts/imx6ull-colibri-iris.dtsi +++ b/arch/arm/boot/dts/imx6ull-colibri-iris.dtsi @@ -59,7 +59,7 @@ * in userspace. * The same applies to uart1_tx_on. */ - uart25_tx_on { + uart25_tx_on-hog { gpio-hog; gpios = <15 0>; output-high; @@ -67,7 +67,7 @@ }; &gpio2 { - uart1_tx_on { + uart1_tx_on-hog { gpio-hog; gpios = <7 0>; output-high; diff --git a/arch/arm/boot/dts/imx6ull-colibri-wifi-aster.dts b/arch/arm/boot/dts/imx6ull-colibri-wifi-aster.dts index b4f65e8c5857..c7da5b41966f 100644 --- a/arch/arm/boot/dts/imx6ull-colibri-wifi-aster.dts +++ b/arch/arm/boot/dts/imx6ull-colibri-wifi-aster.dts @@ -15,6 +15,46 @@ "fsl,imx6ull"; }; +&ad7879_ts { + status = "okay"; +}; + &atmel_mxt_ts { status = "okay"; }; + +&backlight { + status = "okay"; +}; + +&i2c1 { + status = "okay"; +}; + +&i2c2 { + status = "okay"; +}; + +&lcdif { + status = "okay"; +}; + +&panel_dpi { + status = "okay"; +}; + +&pwm4 { + status = "okay"; +}; + +/* PWM <B> */ +&pwm5 { + /* Pin already used by atmel_mxt_ts touchscreen */ + status = "disabled"; +}; + +/* PWM <C> */ +&pwm6 { + /* Pin already used by atmel_mxt_ts touchscreen */ + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/imx6ull-colibri-wifi-eval-v3.dts b/arch/arm/boot/dts/imx6ull-colibri-wifi-eval-v3.dts index 1d64d1a5d8a7..917f5dbe64ba 100644 --- a/arch/arm/boot/dts/imx6ull-colibri-wifi-eval-v3.dts +++ b/arch/arm/boot/dts/imx6ull-colibri-wifi-eval-v3.dts @@ -12,3 +12,27 @@ model = "Toradex Colibri iMX6ULL 512MB on Colibri Evaluation Board V3"; compatible = "toradex,colibri-imx6ull-wifi-eval", "fsl,imx6ull"; }; + +&ad7879_ts { + status = "okay"; +}; + +&backlight { + status = "okay"; +}; + +&i2c2 { + status = "okay"; +}; + +&lcdif { + status = "okay"; +}; + +&panel_dpi { + status = "okay"; +}; + +&pwm4 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6ull-colibri-wifi-iris-v2.dts b/arch/arm/boot/dts/imx6ull-colibri-wifi-iris-v2.dts index ce02f8a9ddd3..488da6df56fa 100644 --- a/arch/arm/boot/dts/imx6ull-colibri-wifi-iris-v2.dts +++ b/arch/arm/boot/dts/imx6ull-colibri-wifi-iris-v2.dts @@ -15,13 +15,21 @@ "fsl,imx6ull"; }; +&ad7879_ts { + status = "okay"; +}; + &atmel_mxt_ts { status = "okay"; }; +&backlight { + status = "okay"; +}; + &gpio1 { /* This turns the LVDS transceiver on */ - lvds-power-on { + lvds-power-on-hog { gpio-hog; gpios = <14 GPIO_ACTIVE_HIGH>; /* SODIMM 99 */ line-name = "LVDS_POWER_ON"; @@ -34,7 +42,7 @@ * This switches the LVDS transceiver to the single-channel * output mode. */ - lvds-ch-mode { + lvds-ch-mode-hog { gpio-hog; gpios = <0 GPIO_ACTIVE_HIGH>; /* SODIMM 55 */ line-name = "LVDS_CH_MODE"; @@ -44,7 +52,7 @@ /* * This switches the LVDS transceiver to the 24-bit RGB mode. */ - lvds-rgb-mode { + lvds-rgb-mode-hog { gpio-hog; gpios = <1 GPIO_ACTIVE_HIGH>; /* SODIMM 63 */ line-name = "LVDS_RGB_MODE"; @@ -56,10 +64,26 @@ /* * This switches the LVDS transceiver to VESA color mapping mode. */ - lvds-color-map { + lvds-color-map-hog { gpio-hog; gpios = <3 GPIO_ACTIVE_HIGH>; /* SODIMM 95 */ line-name = "LVDS_COLOR_MAP"; output-low; }; }; + +&i2c2 { + status = "okay"; +}; + +&lcdif { + status = "okay"; +}; + +&panel_dpi { + status = "okay"; +}; + +&pwm4 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6ull-colibri-wifi-iris.dts b/arch/arm/boot/dts/imx6ull-colibri-wifi-iris.dts index 5ac1aa298ce7..e63253254754 100644 --- a/arch/arm/boot/dts/imx6ull-colibri-wifi-iris.dts +++ b/arch/arm/boot/dts/imx6ull-colibri-wifi-iris.dts @@ -15,6 +15,26 @@ "fsl,imx6ull"; }; +&ad7879_ts { + status = "okay"; +}; + &atmel_mxt_ts { status = "okay"; }; + +&backlight { + status = "okay"; +}; + +&i2c2 { + status = "okay"; +}; + +&lcdif { + status = "okay"; +}; + +&panel_dpi { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6ull-colibri.dtsi b/arch/arm/boot/dts/imx6ull-colibri.dtsi index 577a424b0e1d..336ab2e0534c 100644 --- a/arch/arm/boot/dts/imx6ull-colibri.dtsi +++ b/arch/arm/boot/dts/imx6ull-colibri.dtsi @@ -21,7 +21,29 @@ pinctrl-0 = <&pinctrl_gpio_bl_on>; power-supply = <®_3v3>; pwms = <&pwm4 0 5000000 1>; - status = "okay"; + status = "disabled"; + }; + + connector { + compatible = "gpio-usb-b-connector", "usb-b-connector"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_snvs_usbc_det>; + id-gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>; /* SODIMM 137 / USBC_DET */ + label = "USBC"; + self-powered; + type = "micro"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + usb_dr_connector: endpoint { + remote-endpoint = <&usb1_drd_sw>; + }; + }; + }; }; gpio-keys { @@ -42,7 +64,7 @@ compatible = "edt,et057090dhu"; backlight = <&backlight>; power-supply = <®_3v3>; - status = "okay"; + status = "disabled"; port { lcd_panel_in: endpoint { @@ -159,7 +181,7 @@ pinctrl-1 = <&pinctrl_i2c1_gpio>; sda-gpios = <&gpio1 29 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; scl-gpios = <&gpio1 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - status = "okay"; + status = "disabled"; /* Atmel maxtouch controller */ atmel_mxt_ts: touchscreen@4a { @@ -202,6 +224,7 @@ adi,median-filter-size = /bits/ 8 <2>; adi,averaging = /bits/ 8 <1>; adi,conversion-interval = /bits/ 8 <255>; + status = "disabled"; }; }; @@ -209,6 +232,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_lcdif_dat &pinctrl_lcdif_ctrl>; + status = "disabled"; port { lcdif_out: endpoint { @@ -278,6 +302,13 @@ srp-disable; hnp-disable; adp-disable; + usb-role-switch; + + port { + usb1_drd_sw: endpoint { + remote-endpoint = <&usb_dr_connector>; + }; + }; }; /* Colibri USBH */ diff --git a/arch/arm/boot/dts/imx7-colibri.dtsi b/arch/arm/boot/dts/imx7-colibri.dtsi index a8c31ee65623..f8b8372b6851 100644 --- a/arch/arm/boot/dts/imx7-colibri.dtsi +++ b/arch/arm/boot/dts/imx7-colibri.dtsi @@ -29,7 +29,6 @@ extcon_usbc_det: usbc-det { compatible = "linux,extcon-usb-gpio"; - debounce = <25>; id-gpio = <&gpio7 14 GPIO_ACTIVE_HIGH>; /* SODIMM 137 / USBC_DET */ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usbc_det>; @@ -652,7 +651,7 @@ * NOTE: This pin group conflicts with pin groups pinctrl_pwm2/pinctrl_pwm3. * Don't use them simultaneously. */ - pinctrl_atmel_adapter: atmelconnectorgrp { + pinctrl_atmel_adapter: atmeladaptergrp { fsl,pins = < MX7D_PAD_GPIO1_IO09__GPIO1_IO9 0x74 /* SODIMM 28 / INT */ MX7D_PAD_GPIO1_IO10__GPIO1_IO10 0x14 /* SODIMM 30 / RST */ @@ -660,7 +659,7 @@ }; /* Atmel MXT touchsceen + boards with built-in Capacitive Touch Connector */ - pinctrl_atmel_connector: atmeladaptergrp { + pinctrl_atmel_connector: atmelconnectorgrp { fsl,pins = < MX7D_PAD_EPDC_BDR0__GPIO2_IO28 0x14 /* SODIMM 106 / RST */ MX7D_PAD_EPDC_DATA15__GPIO2_IO15 0x74 /* SODIMM 107 / INT */ diff --git a/arch/arm/boot/dts/imx7d-remarkable2.dts b/arch/arm/boot/dts/imx7d-remarkable2.dts index a2a91bfdd98e..8b2f11e85e05 100644 --- a/arch/arm/boot/dts/imx7d-remarkable2.dts +++ b/arch/arm/boot/dts/imx7d-remarkable2.dts @@ -22,6 +22,28 @@ reg = <0x80000000 0x40000000>; }; + thermal-zones { + epd-thermal { + thermal-sensors = <&sy7636a>; + polling-delay-passive = <30000>; + polling-delay = <30000>; + + trips { + trip0 { + temperature = <49000>; + hysteresis = <2000>; + type = "passive"; + }; + + trip1 { + temperature = <50000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + }; + reg_brcm: regulator-brcm { compatible = "regulator-fixed"; regulator-name = "brcm_reg"; @@ -84,6 +106,32 @@ }; }; +&i2c4 { + clock-frequency = <100000>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&pinctrl_i2c4>; + pinctrl-1 = <&pinctrl_i2c4>; + status = "okay"; + + sy7636a: pmic@62 { + compatible = "silergy,sy7636a"; + reg = <0x62>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_epdpmic>; + #address-cells = <1>; + #size-cells = <0>; + #thermal-sensor-cells = <0>; + epd-pwr-good-gpios = <&gpio6 21 GPIO_ACTIVE_HIGH>; + + regulators { + reg_epdpmic: vcom { + regulator-name = "vcom"; + regulator-boot-on; + }; + }; + }; +}; + &snvs_pwrkey { status = "okay"; }; @@ -177,6 +225,13 @@ >; }; + pinctrl_epdpmic: epdpmicgrp { + fsl,pins = < + MX7D_PAD_SAI2_RX_DATA__GPIO6_IO21 0x00000074 + MX7D_PAD_ENET1_RGMII_TXC__GPIO7_IO11 0x00000014 + >; + }; + pinctrl_i2c1: i2c1grp { fsl,pins = < MX7D_PAD_I2C1_SDA__I2C1_SDA 0x4000007f @@ -184,6 +239,13 @@ >; }; + pinctrl_i2c4: i2c4grp { + fsl,pins = < + MX7D_PAD_I2C4_SDA__I2C4_SDA 0x4000007f + MX7D_PAD_I2C4_SCL__I2C4_SCL 0x4000007f + >; + }; + pinctrl_uart1: uart1grp { fsl,pins = < MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX 0x79 diff --git a/arch/arm/boot/dts/kirkwood-b3.dts b/arch/arm/boot/dts/kirkwood-b3.dts index a7636fe28501..681343c1357a 100644 --- a/arch/arm/boot/dts/kirkwood-b3.dts +++ b/arch/arm/boot/dts/kirkwood-b3.dts @@ -187,7 +187,7 @@ /* Wifi model has Atheros chipset on pcie port */ &pciec { - status = "okay"; + status = "okay"; }; &pcie0 { diff --git a/arch/arm/boot/dts/kirkwood-db-88f6281.dts b/arch/arm/boot/dts/kirkwood-db-88f6281.dts index 2adb17c955aa..a9a8e6b744c7 100644 --- a/arch/arm/boot/dts/kirkwood-db-88f6281.dts +++ b/arch/arm/boot/dts/kirkwood-db-88f6281.dts @@ -18,7 +18,7 @@ }; &pciec { - status = "okay"; + status = "okay"; }; &pcie0 { diff --git a/arch/arm/boot/dts/kirkwood-db-88f6282.dts b/arch/arm/boot/dts/kirkwood-db-88f6282.dts index f84a48539917..6dc6579d4524 100644 --- a/arch/arm/boot/dts/kirkwood-db-88f6282.dts +++ b/arch/arm/boot/dts/kirkwood-db-88f6282.dts @@ -18,7 +18,7 @@ }; &pciec { - status = "okay"; + status = "okay"; }; &pcie0 { diff --git a/arch/arm/boot/dts/kirkwood-dir665.dts b/arch/arm/boot/dts/kirkwood-dir665.dts index c32300611d2c..f9f4b0143ba8 100644 --- a/arch/arm/boot/dts/kirkwood-dir665.dts +++ b/arch/arm/boot/dts/kirkwood-dir665.dts @@ -211,18 +211,18 @@ }; port@1 { - reg = <1>; - label = "lan3"; + reg = <1>; + label = "lan3"; }; port@2 { - reg = <2>; - label = "lan2"; + reg = <2>; + label = "lan2"; }; port@3 { - reg = <3>; - label = "lan1"; + reg = <3>; + label = "lan1"; }; port@4 { @@ -268,7 +268,7 @@ }; &pciec { - status = "okay"; + status = "okay"; }; &pcie0 { diff --git a/arch/arm/boot/dts/kirkwood-ds112.dts b/arch/arm/boot/dts/kirkwood-ds112.dts index f48609e95afe..3912f1b525b6 100644 --- a/arch/arm/boot/dts/kirkwood-ds112.dts +++ b/arch/arm/boot/dts/kirkwood-ds112.dts @@ -43,7 +43,7 @@ }; &pciec { - status = "okay"; + status = "okay"; }; &pcie1 { diff --git a/arch/arm/boot/dts/kirkwood-ds411.dts b/arch/arm/boot/dts/kirkwood-ds411.dts index 86907be70cf9..1d4256ef325d 100644 --- a/arch/arm/boot/dts/kirkwood-ds411.dts +++ b/arch/arm/boot/dts/kirkwood-ds411.dts @@ -47,7 +47,7 @@ }; &pciec { - status = "okay"; + status = "okay"; }; &pcie1 { diff --git a/arch/arm/boot/dts/kirkwood-iconnect.dts b/arch/arm/boot/dts/kirkwood-iconnect.dts index 95af7aa1fdcb..aed20185fd7a 100644 --- a/arch/arm/boot/dts/kirkwood-iconnect.dts +++ b/arch/arm/boot/dts/kirkwood-iconnect.dts @@ -187,7 +187,7 @@ }; &pciec { - status = "okay"; + status = "okay"; }; &pcie0 { diff --git a/arch/arm/boot/dts/kirkwood-km_common.dtsi b/arch/arm/boot/dts/kirkwood-km_common.dtsi index 75dc83914f56..52baffe45f12 100644 --- a/arch/arm/boot/dts/kirkwood-km_common.dtsi +++ b/arch/arm/boot/dts/kirkwood-km_common.dtsi @@ -39,7 +39,7 @@ }; &pciec { - status = "okay"; + status = "okay"; }; &pcie0 { diff --git a/arch/arm/boot/dts/kirkwood-l-50.dts b/arch/arm/boot/dts/kirkwood-l-50.dts index 0d81c43a6a73..60c1e94f5dd3 100644 --- a/arch/arm/boot/dts/kirkwood-l-50.dts +++ b/arch/arm/boot/dts/kirkwood-l-50.dts @@ -223,18 +223,18 @@ }; port@1 { - reg = <1>; - label = "lan1"; + reg = <1>; + label = "lan1"; }; port@2 { - reg = <2>; - label = "lan6"; + reg = <2>; + label = "lan6"; }; port@3 { - reg = <3>; - label = "lan2"; + reg = <3>; + label = "lan2"; }; port@4 { @@ -282,18 +282,18 @@ }; port@1 { - reg = <1>; - label = "lan8"; + reg = <1>; + label = "lan8"; }; port@2 { - reg = <2>; - label = "lan4"; + reg = <2>; + label = "lan4"; }; port@3 { - reg = <3>; - label = "dmz"; + reg = <3>; + label = "dmz"; }; switch1port5: port@5 { diff --git a/arch/arm/boot/dts/kirkwood-laplug.dts b/arch/arm/boot/dts/kirkwood-laplug.dts index 6158214a939a..8c2b540eaf4f 100644 --- a/arch/arm/boot/dts/kirkwood-laplug.dts +++ b/arch/arm/boot/dts/kirkwood-laplug.dts @@ -160,7 +160,7 @@ }; &pciec { - status = "okay"; + status = "okay"; }; &pcie0 { diff --git a/arch/arm/boot/dts/kirkwood-linkstation.dtsi b/arch/arm/boot/dts/kirkwood-linkstation.dtsi index 407d6d8b3a7f..b54c9980f636 100644 --- a/arch/arm/boot/dts/kirkwood-linkstation.dtsi +++ b/arch/arm/boot/dts/kirkwood-linkstation.dtsi @@ -156,7 +156,7 @@ }; &pciec { - status = "okay"; + status = "okay"; }; &pcie0 { diff --git a/arch/arm/boot/dts/kirkwood-mplcec4.dts b/arch/arm/boot/dts/kirkwood-mplcec4.dts index b80d12f6aa49..e87ea7146546 100644 --- a/arch/arm/boot/dts/kirkwood-mplcec4.dts +++ b/arch/arm/boot/dts/kirkwood-mplcec4.dts @@ -8,10 +8,10 @@ model = "MPL CEC4"; compatible = "mpl,cec4-10", "mpl,cec4", "marvell,kirkwood-88f6281", "marvell,kirkwood"; - memory { - device_type = "memory"; - reg = <0x00000000 0x20000000>; - }; + memory { + device_type = "memory"; + reg = <0x00000000 0x20000000>; + }; chosen { bootargs = "console=ttyS0,115200n8 earlyprintk"; @@ -66,8 +66,8 @@ }; }; - i2c@11000 { - status = "okay"; + i2c@11000 { + status = "okay"; rtc@51 { compatible = "nxp,pcf8563"; @@ -79,7 +79,7 @@ reg = <0x57>; }; - }; + }; serial@12000 { status = "okay"; @@ -208,7 +208,7 @@ }; &pciec { - status = "okay"; + status = "okay"; }; &pcie0 { diff --git a/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts b/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts index 2e1a75348908..ced576acfb95 100644 --- a/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts +++ b/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts @@ -170,7 +170,7 @@ }; &pciec { - status = "okay"; + status = "okay"; }; &pcie0 { diff --git a/arch/arm/boot/dts/kirkwood-nas2big.dts b/arch/arm/boot/dts/kirkwood-nas2big.dts index 6a2934b7d0ce..0b0a15093146 100644 --- a/arch/arm/boot/dts/kirkwood-nas2big.dts +++ b/arch/arm/boot/dts/kirkwood-nas2big.dts @@ -131,7 +131,7 @@ }; &pciec { - status = "okay"; + status = "okay"; }; &pcie0 { diff --git a/arch/arm/boot/dts/kirkwood-net2big.dts b/arch/arm/boot/dts/kirkwood-net2big.dts index 3e3ac289e5b0..d5f6bb50ba11 100644 --- a/arch/arm/boot/dts/kirkwood-net2big.dts +++ b/arch/arm/boot/dts/kirkwood-net2big.dts @@ -46,11 +46,11 @@ }; clocks { - g762_clk: g762-oscillator { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <32768>; - }; + g762_clk: g762-oscillator { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; }; }; diff --git a/arch/arm/boot/dts/kirkwood-net5big.dts b/arch/arm/boot/dts/kirkwood-net5big.dts index cba8a2b6f6d9..2497ad26b5b6 100644 --- a/arch/arm/boot/dts/kirkwood-net5big.dts +++ b/arch/arm/boot/dts/kirkwood-net5big.dts @@ -78,11 +78,11 @@ }; clocks { - g762_clk: g762-oscillator { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <32768>; - }; + g762_clk: g762-oscillator { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; }; netxbig-leds { diff --git a/arch/arm/boot/dts/kirkwood-netgear_readynas_nv+_v2.dts b/arch/arm/boot/dts/kirkwood-netgear_readynas_nv+_v2.dts index b13aee570804..6cf76430cfab 100644 --- a/arch/arm/boot/dts/kirkwood-netgear_readynas_nv+_v2.dts +++ b/arch/arm/boot/dts/kirkwood-netgear_readynas_nv+_v2.dts @@ -78,11 +78,11 @@ }; clocks { - g762_clk: g762-oscillator { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <8192>; - }; + g762_clk: g762-oscillator { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <8192>; + }; }; i2c@11000 { @@ -266,7 +266,7 @@ /* Connected to NEC uPD720200 USB 3.0 controller */ &pciec { - status = "okay"; + status = "okay"; }; &pcie0 { diff --git a/arch/arm/boot/dts/kirkwood-nsa310.dts b/arch/arm/boot/dts/kirkwood-nsa310.dts index 9b861c2e76c5..c1799a07816e 100644 --- a/arch/arm/boot/dts/kirkwood-nsa310.dts +++ b/arch/arm/boot/dts/kirkwood-nsa310.dts @@ -131,7 +131,7 @@ }; &pciec { - status = "okay"; + status = "okay"; }; &pcie0 { diff --git a/arch/arm/boot/dts/kirkwood-nsa310s.dts b/arch/arm/boot/dts/kirkwood-nsa310s.dts new file mode 100644 index 000000000000..49da633a1bc0 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-nsa310s.dts @@ -0,0 +1,259 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * ZyXEL NSA310S Board Description + * Copyright 2020-2022 Pawel Dembicki <paweldembicki@gmail.com> + * Copyright (c) 2015-2021, Tony Dinh <mibodhi@gmail.com> + * Copyright (c) 2014, Adam Baker <linux@baker-net.org.uk> + * Based upon the board setup file created by Peter Schildmann + */ +/dts-v1/; + +#include "kirkwood.dtsi" +#include "kirkwood-6281.dtsi" +#include <dt-bindings/leds/common.h> + +/ { + model = "ZyXEL NSA310S"; + compatible = "zyxel,nsa310s", "marvell,kirkwood-88f6702", "marvell,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x10000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk"; + stdout-path = &uart0; + }; + + gpio_poweroff { + compatible = "gpio-poweroff"; + pinctrl-0 = <&pmx_pwr_off>; + pinctrl-names = "default"; + gpios = <&gpio0 27 GPIO_ACTIVE_HIGH>; + }; + + keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-0 = <&pmx_buttons>; + pinctrl-names = "default"; + + power { + label = "Power Button"; + linux,code = <KEY_POWER>; + gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>; + }; + + copy { + label = "Copy Button"; + linux,code = <KEY_COPY>; + gpios = <&gpio0 25 GPIO_ACTIVE_LOW>; + }; + + reset { + label = "Reset Button"; + linux,code = <KEY_RESTART>; + gpios = <&gpio0 24 GPIO_ACTIVE_LOW>; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-0 = <&pmx_leds>; + pinctrl-names = "default"; + + led-1 { + function = LED_FUNCTION_DISK_ERR; + color = <LED_COLOR_ID_RED>; + gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; + }; + + led-2 { + function = LED_FUNCTION_USB; + color = <LED_COLOR_ID_GREEN>; + gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "usb-host"; + }; + + led-3 { + function = LED_FUNCTION_DISK; + color = <LED_COLOR_ID_GREEN>; + gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "ata1"; + }; + + led-4 { + function = LED_FUNCTION_INDICATOR; + color = <LED_COLOR_ID_GREEN>; + gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>; + }; + + led-5 { + function = LED_FUNCTION_INDICATOR; + color = <LED_COLOR_ID_RED>; + gpios = <&gpio0 23 GPIO_ACTIVE_HIGH>; + }; + + led-6 { + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_GREEN>; + gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + + led-7 { + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_RED>; + gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>; + }; + }; + + usb0_power: regulator@1 { + compatible = "regulator-fixed"; + regulator-name = "USB Power"; + + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio0 21 GPIO_ACTIVE_HIGH>; + }; + + sata1_power: regulator@2 { + compatible = "regulator-fixed"; + regulator-name = "SATA1 Power"; + + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio1 1 GPIO_ACTIVE_HIGH>; + }; + + thermal-zones { + disk-thermal { + polling-delay = <20000>; + polling-delay-passive = <2000>; + + thermal-sensors = <&hdd_temp>; + + trips { + disk_alert: disk-alert { + temperature = <40000>; + hysteresis = <5000>; + type = "active"; + }; + disk_crit: disk-crit { + temperature = <60000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + }; +}; + + +ð0 { + status = "okay"; + + ethernet0-port@0 { + phy-handle = <ðphy0>; + }; +}; + +&i2c0 { + status = "okay"; + + rtc@68 { + compatible = "htk,ht1382"; + reg = <0x68>; + }; +}; + +&mdio { + status = "okay"; + + ethphy0: ethernet-phy@1 { + reg = <1>; + phy-mode = "rgmii-id"; + marvell,reg-init = <0x1 0x16 0x0 0x3>, + <0x1 0x10 0x0 0x1017>, + <0x1 0x11 0x0 0x4408>, + <0x1 0x16 0x0 0x0>; + }; +}; + +&nand { + status = "okay"; + chip-delay = <35>; + + partition@0 { + label = "uboot"; + reg = <0x0000000 0x00c0000>; + read-only; + }; + partition@c0000 { + label = "uboot_env"; + reg = <0x00c0000 0x0080000>; + }; + partition@140000 { + label = "ubi"; + reg = <0x0140000 0x7ec0000>; + }; +}; + +&pciec { + status = "okay"; +}; + +&pcie0 { + status = "okay"; +}; + +&pinctrl { + pinctrl-names = "default"; + + pmx_buttons: pmx-buttons { + marvell,pins = "mpp24", "mpp25", "mpp26"; + marvell,function = "gpio"; + }; + + pmx_leds: pmx-leds { + marvell,pins = "mpp13", "mpp15", "mpp16", "mpp22", "mpp23", + "mpp28", "mpp29"; + marvell,function = "gpio"; + }; + + pmx_power: pmx-power { + marvell,pins = "mpp21", "mpp33"; + marvell,function = "gpio"; + }; + + pmx_pwr_off: pmx-pwr-off { + marvell,pins = "mpp27"; + marvell,function = "gpio"; + }; +}; + +&rtc { + status = "disabled"; +}; + +&sata { + status = "okay"; + nr-ports = <1>; + #address-cells = <1>; + #size-cells = <0>; + + hdd_temp: sata-port@0 { + reg = <0>; + #thermal-sensor-cells = <0>; + }; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/kirkwood-nsa320.dts b/arch/arm/boot/dts/kirkwood-nsa320.dts index b69b096f267b..652405e65006 100644 --- a/arch/arm/boot/dts/kirkwood-nsa320.dts +++ b/arch/arm/boot/dts/kirkwood-nsa320.dts @@ -211,7 +211,7 @@ }; &pciec { - status = "okay"; + status = "okay"; }; &pcie0 { diff --git a/arch/arm/boot/dts/kirkwood-nsa325.dts b/arch/arm/boot/dts/kirkwood-nsa325.dts index 6f8085dbb1f4..371456de34b2 100644 --- a/arch/arm/boot/dts/kirkwood-nsa325.dts +++ b/arch/arm/boot/dts/kirkwood-nsa325.dts @@ -224,7 +224,7 @@ }; &pciec { - status = "okay"; + status = "okay"; }; &pcie0 { diff --git a/arch/arm/boot/dts/kirkwood-nsa3x0-common.dtsi b/arch/arm/boot/dts/kirkwood-nsa3x0-common.dtsi index 8f73197f251a..ea3d36512e9f 100644 --- a/arch/arm/boot/dts/kirkwood-nsa3x0-common.dtsi +++ b/arch/arm/boot/dts/kirkwood-nsa3x0-common.dtsi @@ -150,7 +150,7 @@ }; &pciec { - status = "okay"; + status = "okay"; }; &pcie0 { diff --git a/arch/arm/boot/dts/kirkwood-rd88f6192.dts b/arch/arm/boot/dts/kirkwood-rd88f6192.dts index 712d6042b132..f00325ffde07 100644 --- a/arch/arm/boot/dts/kirkwood-rd88f6192.dts +++ b/arch/arm/boot/dts/kirkwood-rd88f6192.dts @@ -31,10 +31,10 @@ pinctrl-0 = <&pmx_usb_power>; pinctrl-names = "default"; - pmx_usb_power: pmx-usb-power { - marvell,pins = "mpp10"; - marvell,function = "gpo"; - }; + pmx_usb_power: pmx-usb-power { + marvell,pins = "mpp10"; + marvell,function = "gpo"; + }; }; serial@12000 { @@ -62,43 +62,43 @@ }; regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-0 = <&pmx_usb_power>; - pinctrl-names = "default"; - - usb_power: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - regulator-name = "USB VBUS"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - regulator-always-on; - regulator-boot-on; - gpio = <&gpio0 10 GPIO_ACTIVE_HIGH>; - }; + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-0 = <&pmx_usb_power>; + pinctrl-names = "default"; + + usb_power: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "USB VBUS"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio0 10 GPIO_ACTIVE_HIGH>; + }; }; }; &mdio { - status = "okay"; + status = "okay"; - ethphy0: ethernet-phy@8 { - reg = <8>; - }; + ethphy0: ethernet-phy@8 { + reg = <8>; + }; }; ð0 { - status = "okay"; - ethernet0-port@0 { - phy-handle = <ðphy0>; - }; + status = "okay"; + ethernet0-port@0 { + phy-handle = <ðphy0>; + }; }; &pciec { - status = "okay"; + status = "okay"; }; &pcie0 { diff --git a/arch/arm/boot/dts/kirkwood-rd88f6281-z0.dts b/arch/arm/boot/dts/kirkwood-rd88f6281-z0.dts index 9d88301daf0e..72edd47e19ff 100644 --- a/arch/arm/boot/dts/kirkwood-rd88f6281-z0.dts +++ b/arch/arm/boot/dts/kirkwood-rd88f6281-z0.dts @@ -19,7 +19,7 @@ }; ð1 { - status = "disabled"; + status = "disabled"; }; &switch { diff --git a/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi b/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi index f1f8eee132e8..e21aa674945d 100644 --- a/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi +++ b/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi @@ -48,7 +48,7 @@ cd-gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>; /* No WP GPIO */ }; - }; + }; }; &nand { @@ -126,7 +126,7 @@ }; &pciec { - status = "okay"; + status = "okay"; }; &pcie0 { diff --git a/arch/arm/boot/dts/kirkwood-rs212.dts b/arch/arm/boot/dts/kirkwood-rs212.dts index c51cea883215..4ad412115a24 100644 --- a/arch/arm/boot/dts/kirkwood-rs212.dts +++ b/arch/arm/boot/dts/kirkwood-rs212.dts @@ -43,7 +43,7 @@ }; &pciec { - status = "okay"; + status = "okay"; }; &pcie1 { diff --git a/arch/arm/boot/dts/kirkwood-synology.dtsi b/arch/arm/boot/dts/kirkwood-synology.dtsi index 8f6c387d3a8b..9b6666020cdd 100644 --- a/arch/arm/boot/dts/kirkwood-synology.dtsi +++ b/arch/arm/boot/dts/kirkwood-synology.dtsi @@ -847,7 +847,7 @@ }; &pciec { - status = "okay"; + status = "okay"; }; &pcie0 { diff --git a/arch/arm/boot/dts/kirkwood-t5325.dts b/arch/arm/boot/dts/kirkwood-t5325.dts index fe63b3a03a72..ad093324e075 100644 --- a/arch/arm/boot/dts/kirkwood-t5325.dts +++ b/arch/arm/boot/dts/kirkwood-t5325.dts @@ -219,7 +219,7 @@ }; &pciec { - status = "okay"; + status = "okay"; }; &pcie0 { diff --git a/arch/arm/boot/dts/kirkwood-ts219.dtsi b/arch/arm/boot/dts/kirkwood-ts219.dtsi index 994cabcf4b51..1939462a5f48 100644 --- a/arch/arm/boot/dts/kirkwood-ts219.dtsi +++ b/arch/arm/boot/dts/kirkwood-ts219.dtsi @@ -86,7 +86,7 @@ status = "okay"; ethphy0: ethernet-phy@X { - /* overwrite reg property in board file */ + /* overwrite reg property in board file */ }; }; @@ -98,7 +98,7 @@ }; &pciec { - status = "okay"; + status = "okay"; }; &pcie0 { diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi index fca31a5d5ac7..815ef7719d13 100644 --- a/arch/arm/boot/dts/kirkwood.dtsi +++ b/arch/arm/boot/dts/kirkwood.dtsi @@ -24,9 +24,9 @@ }; aliases { - gpio0 = &gpio0; - gpio1 = &gpio1; - i2c0 = &i2c0; + gpio0 = &gpio0; + gpio1 = &gpio1; + i2c0 = &i2c0; }; mbus@f1000000 { @@ -279,15 +279,15 @@ clocks = <&gate_clk 8>; xor00 { - interrupts = <5>; - dmacap,memcpy; - dmacap,xor; + interrupts = <5>; + dmacap,memcpy; + dmacap,xor; }; xor01 { - interrupts = <6>; - dmacap,memcpy; - dmacap,xor; - dmacap,memset; + interrupts = <6>; + dmacap,memcpy; + dmacap,xor; + dmacap,memset; }; }; @@ -299,15 +299,15 @@ clocks = <&gate_clk 16>; xor00 { - interrupts = <7>; - dmacap,memcpy; - dmacap,xor; + interrupts = <7>; + dmacap,memcpy; + dmacap,xor; }; xor01 { - interrupts = <8>; - dmacap,memcpy; - dmacap,xor; - dmacap,memset; + interrupts = <8>; + dmacap,memcpy; + dmacap,xor; + dmacap,memset; }; }; diff --git a/arch/arm/boot/dts/lan966x-pcb8290.dts b/arch/arm/boot/dts/lan966x-pcb8290.dts index 77187f59f04d..8804e8ba5370 100644 --- a/arch/arm/boot/dts/lan966x-pcb8290.dts +++ b/arch/arm/boot/dts/lan966x-pcb8290.dts @@ -58,41 +58,57 @@ ext_phy0: ethernet-phy@7 { reg = <7>; + interrupts = <24 IRQ_TYPE_LEVEL_LOW>; + interrupt-parent = <&gpio>; coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>; }; ext_phy1: ethernet-phy@8 { reg = <8>; + interrupts = <24 IRQ_TYPE_LEVEL_LOW>; + interrupt-parent = <&gpio>; coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>; }; ext_phy2: ethernet-phy@9 { reg = <9>; + interrupts = <24 IRQ_TYPE_LEVEL_LOW>; + interrupt-parent = <&gpio>; coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>; }; ext_phy3: ethernet-phy@10 { reg = <10>; + interrupts = <24 IRQ_TYPE_LEVEL_LOW>; + interrupt-parent = <&gpio>; coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>; }; ext_phy4: ethernet-phy@15 { reg = <15>; + interrupts = <24 IRQ_TYPE_LEVEL_LOW>; + interrupt-parent = <&gpio>; coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>; }; ext_phy5: ethernet-phy@16 { reg = <16>; + interrupts = <24 IRQ_TYPE_LEVEL_LOW>; + interrupt-parent = <&gpio>; coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>; }; ext_phy6: ethernet-phy@17 { reg = <17>; + interrupts = <24 IRQ_TYPE_LEVEL_LOW>; + interrupt-parent = <&gpio>; coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>; }; ext_phy7: ethernet-phy@18 { reg = <18>; + interrupts = <24 IRQ_TYPE_LEVEL_LOW>; + interrupt-parent = <&gpio>; coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>; }; }; diff --git a/arch/arm/boot/dts/lan966x-pcb8291.dts b/arch/arm/boot/dts/lan966x-pcb8291.dts index f4f054cdf2a8..3a3d76af8612 100644 --- a/arch/arm/boot/dts/lan966x-pcb8291.dts +++ b/arch/arm/boot/dts/lan966x-pcb8291.dts @@ -69,6 +69,12 @@ pins = "GPIO_35", "GPIO_36"; function = "can0_b"; }; + + sgpio_a_pins: sgpio-a-pins { + /* SCK, D0, D1, LD */ + pins = "GPIO_32", "GPIO_33", "GPIO_34", "GPIO_35"; + function = "sgpio_a"; + }; }; &can0 { @@ -118,6 +124,20 @@ status = "okay"; }; +&sgpio { + pinctrl-0 = <&sgpio_a_pins>; + pinctrl-names = "default"; + microchip,sgpio-port-ranges = <0 3>, <8 11>; + status = "okay"; + + gpio@0 { + ngpios = <64>; + }; + gpio@1 { + ngpios = <64>; + }; +}; + &switch { status = "okay"; }; diff --git a/arch/arm/boot/dts/lan966x.dtsi b/arch/arm/boot/dts/lan966x.dtsi index 0bf818713422..05b73f7cf0c7 100644 --- a/arch/arm/boot/dts/lan966x.dtsi +++ b/arch/arm/boot/dts/lan966x.dtsi @@ -157,6 +157,11 @@ }; }; + otp: otp@e0021000 { + compatible = "microchip,lan9668-otpc", "microchip,lan9662-otpc"; + reg = <0xe0021000 0x300>; + }; + flx0: flexcom@e0040000 { compatible = "atmel,sama5d2-flexcom"; reg = <0xe0040000 0x100>; diff --git a/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi b/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi index d3da8b1b473b..e0cbac500e17 100644 --- a/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi +++ b/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi @@ -59,7 +59,7 @@ }; }; - pwm10: dmtimer-pwm { + pwm10: pwm-10 { compatible = "ti,omap-dmtimer-pwm"; pinctrl-names = "default"; pinctrl-0 = <&pwm_pins>; diff --git a/arch/arm/boot/dts/logicpd-torpedo-som.dtsi b/arch/arm/boot/dts/logicpd-torpedo-som.dtsi index 3a5228562b0d..72b5af475d09 100644 --- a/arch/arm/boot/dts/logicpd-torpedo-som.dtsi +++ b/arch/arm/boot/dts/logicpd-torpedo-som.dtsi @@ -20,7 +20,7 @@ leds { compatible = "gpio-leds"; - user0 { + led-user0 { label = "user0"; gpios = <&twl_gpio 18 GPIO_ACTIVE_LOW>; /* LEDA */ linux,default-trigger = "none"; diff --git a/arch/arm/boot/dts/lpc32xx.dtsi b/arch/arm/boot/dts/lpc32xx.dtsi index c87066d6c995..974410918f35 100644 --- a/arch/arm/boot/dts/lpc32xx.dtsi +++ b/arch/arm/boot/dts/lpc32xx.dtsi @@ -315,7 +315,7 @@ /* System Control Block */ scb { compatible = "simple-bus"; - ranges = <0x0 0x040004000 0x00001000>; + ranges = <0x0 0x40004000 0x00001000>; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/ls1021a-moxa-uc-8410a.dts b/arch/arm/boot/dts/ls1021a-moxa-uc-8410a.dts index f3ddea934f1b..d2cae8c7d7a6 100644 --- a/arch/arm/boot/dts/ls1021a-moxa-uc-8410a.dts +++ b/arch/arm/boot/dts/ls1021a-moxa-uc-8410a.dts @@ -30,11 +30,11 @@ }; reg_3p3v: regulator-3p3v { - compatible = "regulator-fixed"; - regulator-name = "3P3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; }; leds { diff --git a/arch/arm/boot/dts/motorola-mapphone-common.dtsi b/arch/arm/boot/dts/motorola-mapphone-common.dtsi index c7a1f3ffc48c..f7cc8fc678fa 100644 --- a/arch/arm/boot/dts/motorola-mapphone-common.dtsi +++ b/arch/arm/boot/dts/motorola-mapphone-common.dtsi @@ -133,7 +133,7 @@ dais = <&mcbsp2_port>, <&mcbsp3_port>; }; - pwm8: dmtimer-pwm-8 { + pwm8: pwm-8 { pinctrl-names = "default"; pinctrl-0 = <&vibrator_direction_pin>; @@ -143,7 +143,7 @@ ti,clock-source = <0x01>; }; - pwm9: dmtimer-pwm-9 { + pwm9: pwm-9 { pinctrl-names = "default"; pinctrl-0 = <&vibrator_enable_pin>; diff --git a/arch/arm/boot/dts/nuvoton-npcm730-gbs.dts b/arch/arm/boot/dts/nuvoton-npcm730-gbs.dts index d10669fcd527..9e9eba8bad5e 100644 --- a/arch/arm/boot/dts/nuvoton-npcm730-gbs.dts +++ b/arch/arm/boot/dts/nuvoton-npcm730-gbs.dts @@ -366,7 +366,7 @@ spi-max-frequency = <20000000>; spi-rx-bus-width = <2>; label = "bmc"; - partitions@80000000 { + partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/nuvoton-npcm730-gsj.dts b/arch/arm/boot/dts/nuvoton-npcm730-gsj.dts index 491606c4f044..2a394cc15284 100644 --- a/arch/arm/boot/dts/nuvoton-npcm730-gsj.dts +++ b/arch/arm/boot/dts/nuvoton-npcm730-gsj.dts @@ -142,7 +142,7 @@ reg = <0>; spi-rx-bus-width = <2>; - partitions@80000000 { + partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/nuvoton-npcm730-kudo.dts b/arch/arm/boot/dts/nuvoton-npcm730-kudo.dts index a0c2d7652625..f7b38bee039b 100644 --- a/arch/arm/boot/dts/nuvoton-npcm730-kudo.dts +++ b/arch/arm/boot/dts/nuvoton-npcm730-kudo.dts @@ -388,7 +388,7 @@ spi-max-frequency = <5000000>; spi-rx-bus-width = <2>; label = "bmc"; - partitions@80000000 { + partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; @@ -422,7 +422,7 @@ reg = <1>; spi-max-frequency = <5000000>; spi-rx-bus-width = <2>; - partitions@88000000 { + partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; @@ -447,7 +447,7 @@ reg = <0>; spi-max-frequency = <5000000>; spi-rx-bus-width = <2>; - partitions@A0000000 { + partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/nuvoton-npcm750-evb.dts b/arch/arm/boot/dts/nuvoton-npcm750-evb.dts index 3dad32834e5e..f53d45fa1de8 100644 --- a/arch/arm/boot/dts/nuvoton-npcm750-evb.dts +++ b/arch/arm/boot/dts/nuvoton-npcm750-evb.dts @@ -74,7 +74,7 @@ spi-rx-bus-width = <2>; reg = <0>; spi-max-frequency = <5000000>; - partitions@80000000 { + partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; @@ -135,7 +135,7 @@ spi-rx-bus-width = <2>; reg = <0>; spi-max-frequency = <5000000>; - partitions@A0000000 { + partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/nuvoton-npcm750-runbmc-olympus.dts b/arch/arm/boot/dts/nuvoton-npcm750-runbmc-olympus.dts index 132e702281fc..87359ab05db3 100644 --- a/arch/arm/boot/dts/nuvoton-npcm750-runbmc-olympus.dts +++ b/arch/arm/boot/dts/nuvoton-npcm750-runbmc-olympus.dts @@ -107,7 +107,7 @@ reg = <0>; spi-rx-bus-width = <2>; - partitions@80000000 { + partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; @@ -146,7 +146,7 @@ reg = <1>; npcm,fiu-rx-bus-width = <2>; - partitions@88000000 { + partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; @@ -173,7 +173,7 @@ reg = <0>; spi-rx-bus-width = <2>; - partitions@A0000000 { + partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/nuvoton-wpcm450-supermicro-x9sci-ln4f.dts b/arch/arm/boot/dts/nuvoton-wpcm450-supermicro-x9sci-ln4f.dts index 3ee61251a16d..b78c116cbc18 100644 --- a/arch/arm/boot/dts/nuvoton-wpcm450-supermicro-x9sci-ln4f.dts +++ b/arch/arm/boot/dts/nuvoton-wpcm450-supermicro-x9sci-ln4f.dts @@ -15,6 +15,11 @@ model = "Supermicro X9SCi-LN4F BMC"; compatible = "supermicro,x9sci-ln4f-bmc", "nuvoton,wpcm450"; + aliases { + serial0 = &serial0; + serial1 = &serial1; + }; + chosen { stdout-path = "serial0:115200n8"; }; @@ -53,6 +58,33 @@ }; }; +&fiu { + status = "okay"; + + flash@0 { + reg = <0>; + compatible = "jedec,spi-nor"; + }; +}; + +&gpio0 { + gpio-line-names = + /* 0 */ "", "host-reset-control-n", "", "", "", "", "", "", + /* 8 */ "", "", "", "", "power-chassis-control-n", "", "uid-button", ""; +}; + +&gpio1 { + gpio-line-names = + /* 0 */ "", "", "", "", "led-heartbeat", "", "", "led-uid", + /* 8 */ "", "", "", "", "", "", "", ""; +}; + +&gpio4 { + gpio-line-names = + /* 0 */ "", "", "", "", "", "", "", "", + /* 8 */ "", "", "", "", "", "", "", "power-chassis-good"; +}; + &pinctrl { key_pins: mux-keys { groups = "gspi", "sspi"; @@ -77,7 +109,3 @@ /* "Serial over LAN" port. Connected to ttyS2 of the host system. */ status = "okay"; }; - -&watchdog0 { - status = "okay"; -}; diff --git a/arch/arm/boot/dts/nuvoton-wpcm450.dtsi b/arch/arm/boot/dts/nuvoton-wpcm450.dtsi index 93595850a4c3..b637241316bb 100644 --- a/arch/arm/boot/dts/nuvoton-wpcm450.dtsi +++ b/arch/arm/boot/dts/nuvoton-wpcm450.dtsi @@ -37,6 +37,14 @@ #clock-cells = <0>; }; + refclk: clock-48mhz { + /* 48 MHz reference oscillator */ + compatible = "fixed-clock"; + clock-output-names = "ref"; + clock-frequency = <48000000>; + #clock-cells = <0>; + }; + soc { compatible = "simple-bus"; #address-cells = <1>; @@ -49,6 +57,15 @@ reg = <0xb0000000 0x200>; }; + clk: clock-controller@b0000200 { + compatible = "nuvoton,wpcm450-clk"; + reg = <0xb0000200 0x100>; + clocks = <&refclk>; + clock-names = "ref"; + #clock-cells = <1>; + #reset-cells = <1>; + }; + serial0: serial@b8000000 { compatible = "nuvoton,wpcm450-uart"; reg = <0xb8000000 0x20>; @@ -81,7 +98,6 @@ interrupts = <1 IRQ_TYPE_LEVEL_HIGH>; reg = <0xb800101c 0x4>; clocks = <&clk24m>; - status = "disabled"; }; aic: interrupt-controller@b8002000 { @@ -456,5 +472,21 @@ function = "hg7"; }; }; + + fiu: spi-controller@c8000000 { + compatible = "nuvoton,wpcm450-fiu"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0xc8000000 0x1000>, <0xc0000000 0x4000000>; + reg-names = "control", "memory"; + clocks = <&clk 0>; + status = "disabled"; + }; + + shm: syscon@c8001000 { + compatible = "nuvoton,wpcm450-shm", "syscon"; + reg = <0xc8001000 0x1000>; + reg-io-width = <1>; + }; }; }; diff --git a/arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi b/arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi index ce6c235f68ec..3046ec572632 100644 --- a/arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi +++ b/arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi @@ -8,9 +8,9 @@ / { vddvario: regulator-vddvario { - compatible = "regulator-fixed"; - regulator-name = "vddvario"; - regulator-always-on; + compatible = "regulator-fixed"; + regulator-name = "vddvario"; + regulator-always-on; }; vdd33a: regulator-vdd33a { diff --git a/arch/arm/boot/dts/omap-gpmc-smsc9221.dtsi b/arch/arm/boot/dts/omap-gpmc-smsc9221.dtsi index e7534fe9c53c..bc8961f3690f 100644 --- a/arch/arm/boot/dts/omap-gpmc-smsc9221.dtsi +++ b/arch/arm/boot/dts/omap-gpmc-smsc9221.dtsi @@ -12,9 +12,9 @@ / { vddvario: regulator-vddvario { - compatible = "regulator-fixed"; - regulator-name = "vddvario"; - regulator-always-on; + compatible = "regulator-fixed"; + regulator-name = "vddvario"; + regulator-always-on; }; vdd33a: regulator-vdd33a { diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts index 0548b391334f..47ff1ffddfc5 100644 --- a/arch/arm/boot/dts/omap3-beagle.dts +++ b/arch/arm/boot/dts/omap3-beagle.dts @@ -28,18 +28,18 @@ leds { compatible = "gpio-leds"; - pmu_stat { + led-pmu-stat { label = "beagleboard::pmu_stat"; gpios = <&twl_gpio 19 GPIO_ACTIVE_HIGH>; /* LEDB */ }; - heartbeat { + led-heartbeat { label = "beagleboard::usr0"; gpios = <&gpio5 22 GPIO_ACTIVE_HIGH>; /* 150 -> D6 LED */ linux,default-trigger = "heartbeat"; }; - mmc { + led-mmc { label = "beagleboard::usr1"; gpios = <&gpio5 21 GPIO_ACTIVE_HIGH>; /* 149 -> D7 LED */ linux,default-trigger = "mmc0"; diff --git a/arch/arm/boot/dts/omap3-cm-t3517.dts b/arch/arm/boot/dts/omap3-cm-t3517.dts index 3b8349094baa..f25c0a84a190 100644 --- a/arch/arm/boot/dts/omap3-cm-t3517.dts +++ b/arch/arm/boot/dts/omap3-cm-t3517.dts @@ -11,12 +11,12 @@ model = "CompuLab CM-T3517"; compatible = "compulab,omap3-cm-t3517", "ti,am3517", "ti,omap3"; - vmmc: regulator-vmmc { - compatible = "regulator-fixed"; - regulator-name = "vmmc"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; + vmmc: regulator-vmmc { + compatible = "regulator-fixed"; + regulator-name = "vmmc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; wl12xx_vmmc2: wl12xx_vmmc2 { compatible = "regulator-fixed"; diff --git a/arch/arm/boot/dts/omap3-devkit8000-common.dtsi b/arch/arm/boot/dts/omap3-devkit8000-common.dtsi index 54cd37336be7..38aa1febc33f 100644 --- a/arch/arm/boot/dts/omap3-devkit8000-common.dtsi +++ b/arch/arm/boot/dts/omap3-devkit8000-common.dtsi @@ -15,28 +15,28 @@ leds { compatible = "gpio-leds"; - heartbeat { + led-heartbeat { label = "devkit8000::led1"; gpios = <&gpio6 26 GPIO_ACTIVE_HIGH>; /* 186 -> LED1 */ default-state = "on"; linux,default-trigger = "heartbeat"; }; - mmc { + led-mmc { label = "devkit8000::led2"; gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>; /* 163 -> LED2 */ default-state = "on"; linux,default-trigger = "none"; }; - usr { + led-usr { label = "devkit8000::led3"; gpios = <&gpio6 4 GPIO_ACTIVE_HIGH>; /* 164 -> LED3 */ default-state = "on"; linux,default-trigger = "usr"; }; - pmu_stat { + led-pmu-stat { label = "devkit8000::pmu_stat"; gpios = <&twl_gpio 19 GPIO_ACTIVE_HIGH>; /* LEDB */ }; diff --git a/arch/arm/boot/dts/omap3-echo.dts b/arch/arm/boot/dts/omap3-echo.dts index 8f02ff5e7da6..06d2377d28ad 100644 --- a/arch/arm/boot/dts/omap3-echo.dts +++ b/arch/arm/boot/dts/omap3-echo.dts @@ -146,7 +146,7 @@ label = "q1"; reg = <0x32>; clock-mode = /bits/ 8 <0>; /* LP55XX_CLOCK_AUTO */ - enable-gpio = <&gpio4 13 GPIO_ACTIVE_HIGH>; /* GPIO_109 */ + enable-gpios = <&gpio4 13 GPIO_ACTIVE_HIGH>; /* GPIO_109 */ multi-led@0 { #address-cells = <1>; diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi index 28a6a9345be5..87e0ab1bbe95 100644 --- a/arch/arm/boot/dts/omap3-gta04.dtsi +++ b/arch/arm/boot/dts/omap3-gta04.dtsi @@ -147,7 +147,7 @@ pinctrl-0 = <&backlight_pins>; }; - pwm11: dmtimer-pwm { + pwm11: pwm-11 { compatible = "ti,omap-dmtimer-pwm"; ti,timers = <&timer11>; #pwm-cells = <3>; @@ -332,7 +332,7 @@ OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0) /* dss_data22.dss_data22 */ OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */ >; - }; + }; gps_pins: pinmux_gps_pins { pinctrl-single,pins = < @@ -853,8 +853,8 @@ }; &hdqw1w { - pinctrl-names = "default"; - pinctrl-0 = <&hdq_pins>; + pinctrl-names = "default"; + pinctrl-0 = <&hdq_pins>; }; /* image signal processor within OMAP3 SoC */ diff --git a/arch/arm/boot/dts/omap3-ldp.dts b/arch/arm/boot/dts/omap3-ldp.dts index 36fc8805e0c1..85f33bbb566f 100644 --- a/arch/arm/boot/dts/omap3-ldp.dts +++ b/arch/arm/boot/dts/omap3-ldp.dts @@ -301,5 +301,5 @@ &vaux1 { /* Needed for ads7846 */ - regulator-name = "vcc"; + regulator-name = "vcc"; }; diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts index dd7971556449..6ba2e8f81973 100644 --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -49,7 +49,7 @@ leds { compatible = "gpio-leds"; - heartbeat { + led-heartbeat { label = "debug::sleep"; gpios = <&gpio6 2 GPIO_ACTIVE_HIGH>; /* 162 */ linux,default-trigger = "default-on"; @@ -156,7 +156,7 @@ io-channel-names = "temp", "bsi", "vbat"; }; - pwm9: dmtimer-pwm { + pwm9: pwm-9 { compatible = "ti,omap-dmtimer-pwm"; #pwm-cells = <3>; ti,timers = <&timer9>; @@ -236,27 +236,27 @@ pinctrl-single,pins = < /* address lines */ - OMAP3_CORE1_IOPAD(0x207a, PIN_OUTPUT | MUX_MODE0) /* gpmc_a1.gpmc_a1 */ - OMAP3_CORE1_IOPAD(0x207c, PIN_OUTPUT | MUX_MODE0) /* gpmc_a2.gpmc_a2 */ - OMAP3_CORE1_IOPAD(0x207e, PIN_OUTPUT | MUX_MODE0) /* gpmc_a3.gpmc_a3 */ + OMAP3_CORE1_IOPAD(0x207a, PIN_OUTPUT | MUX_MODE0) /* gpmc_a1.gpmc_a1 */ + OMAP3_CORE1_IOPAD(0x207c, PIN_OUTPUT | MUX_MODE0) /* gpmc_a2.gpmc_a2 */ + OMAP3_CORE1_IOPAD(0x207e, PIN_OUTPUT | MUX_MODE0) /* gpmc_a3.gpmc_a3 */ /* data lines, gpmc_d0..d7 not muxable according to TRM */ - OMAP3_CORE1_IOPAD(0x209e, PIN_INPUT | MUX_MODE0) /* gpmc_d8.gpmc_d8 */ - OMAP3_CORE1_IOPAD(0x20a0, PIN_INPUT | MUX_MODE0) /* gpmc_d9.gpmc_d9 */ - OMAP3_CORE1_IOPAD(0x20a2, PIN_INPUT | MUX_MODE0) /* gpmc_d10.gpmc_d10 */ - OMAP3_CORE1_IOPAD(0x20a4, PIN_INPUT | MUX_MODE0) /* gpmc_d11.gpmc_d11 */ - OMAP3_CORE1_IOPAD(0x20a6, PIN_INPUT | MUX_MODE0) /* gpmc_d12.gpmc_d12 */ - OMAP3_CORE1_IOPAD(0x20a8, PIN_INPUT | MUX_MODE0) /* gpmc_d13.gpmc_d13 */ - OMAP3_CORE1_IOPAD(0x20aa, PIN_INPUT | MUX_MODE0) /* gpmc_d14.gpmc_d14 */ - OMAP3_CORE1_IOPAD(0x20ac, PIN_INPUT | MUX_MODE0) /* gpmc_d15.gpmc_d15 */ + OMAP3_CORE1_IOPAD(0x209e, PIN_INPUT | MUX_MODE0) /* gpmc_d8.gpmc_d8 */ + OMAP3_CORE1_IOPAD(0x20a0, PIN_INPUT | MUX_MODE0) /* gpmc_d9.gpmc_d9 */ + OMAP3_CORE1_IOPAD(0x20a2, PIN_INPUT | MUX_MODE0) /* gpmc_d10.gpmc_d10 */ + OMAP3_CORE1_IOPAD(0x20a4, PIN_INPUT | MUX_MODE0) /* gpmc_d11.gpmc_d11 */ + OMAP3_CORE1_IOPAD(0x20a6, PIN_INPUT | MUX_MODE0) /* gpmc_d12.gpmc_d12 */ + OMAP3_CORE1_IOPAD(0x20a8, PIN_INPUT | MUX_MODE0) /* gpmc_d13.gpmc_d13 */ + OMAP3_CORE1_IOPAD(0x20aa, PIN_INPUT | MUX_MODE0) /* gpmc_d14.gpmc_d14 */ + OMAP3_CORE1_IOPAD(0x20ac, PIN_INPUT | MUX_MODE0) /* gpmc_d15.gpmc_d15 */ /* * gpmc_ncs0, gpmc_nadv_ale, gpmc_noe, gpmc_nwe, gpmc_wait0 not muxable * according to TRM. OneNAND seems to require PIN_INPUT on clock. */ - OMAP3_CORE1_IOPAD(0x20b0, PIN_OUTPUT | MUX_MODE0) /* gpmc_ncs1.gpmc_ncs1 */ - OMAP3_CORE1_IOPAD(0x20be, PIN_INPUT | MUX_MODE0) /* gpmc_clk.gpmc_clk */ - >; + OMAP3_CORE1_IOPAD(0x20b0, PIN_OUTPUT | MUX_MODE0) /* gpmc_ncs1.gpmc_ncs1 */ + OMAP3_CORE1_IOPAD(0x20be, PIN_INPUT | MUX_MODE0) /* gpmc_clk.gpmc_clk */ + >; }; i2c1_pins: pinmux_i2c1_pins { @@ -738,12 +738,12 @@ si4713: si4713@63 { compatible = "silabs,si4713"; - reg = <0x63>; + reg = <0x63>; - interrupts-extended = <&gpio2 21 IRQ_TYPE_EDGE_FALLING>; /* 53 */ - reset-gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>; /* 163 */ - vio-supply = <&vio>; - vdd-supply = <&vaux1>; + interrupts-extended = <&gpio2 21 IRQ_TYPE_EDGE_FALLING>; /* 53 */ + reset-gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>; /* 163 */ + vio-supply = <&vio>; + vdd-supply = <&vaux1>; }; bq24150a: bq24150a@6b { diff --git a/arch/arm/boot/dts/omap3-overo-alto35-common.dtsi b/arch/arm/boot/dts/omap3-overo-alto35-common.dtsi index bb932913c9e3..a6dbbba799b2 100644 --- a/arch/arm/boot/dts/omap3-overo-alto35-common.dtsi +++ b/arch/arm/boot/dts/omap3-overo-alto35-common.dtsi @@ -17,19 +17,19 @@ compatible = "gpio-leds"; pinctrl-names = "default"; pinctrl-0 = <&led_pins>; - gpio148 { + led-gpio148 { label = "overo:red:gpio148"; gpios = <&gpio5 20 GPIO_ACTIVE_HIGH>; /* gpio 148 */ }; - gpio150 { + led-gpio150 { label = "overo:yellow:gpio150"; gpios = <&gpio5 22 GPIO_ACTIVE_HIGH>; /* gpio 150 */ }; - gpio151 { + led-gpio151 { label = "overo:blue:gpio151"; gpios = <&gpio5 23 GPIO_ACTIVE_HIGH>; /* gpio 151 */ }; - gpio170 { + led-gpio170 { label = "overo:green:gpio170"; gpios = <&gpio6 10 GPIO_ACTIVE_HIGH>; /* gpio 170 */ }; diff --git a/arch/arm/boot/dts/omap3-overo-chestnut43-common.dtsi b/arch/arm/boot/dts/omap3-overo-chestnut43-common.dtsi index 2d2c61d7aa86..0d0e62c00916 100644 --- a/arch/arm/boot/dts/omap3-overo-chestnut43-common.dtsi +++ b/arch/arm/boot/dts/omap3-overo-chestnut43-common.dtsi @@ -17,12 +17,12 @@ compatible = "gpio-leds"; pinctrl-names = "default"; pinctrl-0 = <&led_pins>; - heartbeat { + led-heartbeat { label = "overo:red:gpio21"; gpios = <&gpio1 21 GPIO_ACTIVE_LOW>; /* gpio_21 */ linux,default-trigger = "heartbeat"; }; - gpio22 { + led-gpio22 { label = "overo:blue:gpio22"; gpios = <&gpio1 22 GPIO_ACTIVE_LOW>; /* gpio_22 */ }; diff --git a/arch/arm/boot/dts/omap3-overo-gallop43-common.dtsi b/arch/arm/boot/dts/omap3-overo-gallop43-common.dtsi index 155aec121400..5f6721326f86 100644 --- a/arch/arm/boot/dts/omap3-overo-gallop43-common.dtsi +++ b/arch/arm/boot/dts/omap3-overo-gallop43-common.dtsi @@ -17,12 +17,12 @@ compatible = "gpio-leds"; pinctrl-names = "default"; pinctrl-0 = <&led_pins>; - heartbeat { + led-heartbeat { label = "overo:red:gpio21"; gpios = <&gpio1 21 GPIO_ACTIVE_LOW>; /* gpio_21 */ linux,default-trigger = "heartbeat"; }; - gpio22 { + led-gpio22 { label = "overo:blue:gpio22"; gpios = <&gpio1 22 GPIO_ACTIVE_LOW>; /* gpio_22 */ }; diff --git a/arch/arm/boot/dts/omap3-overo-palo35-common.dtsi b/arch/arm/boot/dts/omap3-overo-palo35-common.dtsi index 82a04466747a..4b66f622ac13 100644 --- a/arch/arm/boot/dts/omap3-overo-palo35-common.dtsi +++ b/arch/arm/boot/dts/omap3-overo-palo35-common.dtsi @@ -17,12 +17,12 @@ compatible = "gpio-leds"; pinctrl-names = "default"; pinctrl-0 = <&led_pins>; - heartbeat { + led-heartbeat { label = "overo:red:gpio21"; gpios = <&gpio1 21 GPIO_ACTIVE_LOW>; /* gpio_21 */ linux,default-trigger = "heartbeat"; }; - gpio22 { + led-gpio22 { label = "overo:blue:gpio22"; gpios = <&gpio1 22 GPIO_ACTIVE_LOW>; /* gpio_22 */ }; diff --git a/arch/arm/boot/dts/omap3-overo-palo43-common.dtsi b/arch/arm/boot/dts/omap3-overo-palo43-common.dtsi index 453a55324fa1..a8f163a899f0 100644 --- a/arch/arm/boot/dts/omap3-overo-palo43-common.dtsi +++ b/arch/arm/boot/dts/omap3-overo-palo43-common.dtsi @@ -17,12 +17,12 @@ compatible = "gpio-leds"; pinctrl-names = "default"; pinctrl-0 = <&led_pins>; - heartbeat { + led-heartbeat { label = "overo:red:gpio21"; gpios = <&gpio1 21 GPIO_ACTIVE_LOW>; /* gpio_21 */ linux,default-trigger = "heartbeat"; }; - gpio22 { + led-gpio22 { label = "overo:blue:gpio22"; gpios = <&gpio1 22 GPIO_ACTIVE_LOW>; /* gpio_22 */ }; diff --git a/arch/arm/boot/dts/omap3-overo-summit-common.dtsi b/arch/arm/boot/dts/omap3-overo-summit-common.dtsi index df7450f17ffd..ec03ca17e98b 100644 --- a/arch/arm/boot/dts/omap3-overo-summit-common.dtsi +++ b/arch/arm/boot/dts/omap3-overo-summit-common.dtsi @@ -15,7 +15,7 @@ compatible = "gpio-leds"; pinctrl-names = "default"; pinctrl-0 = <&led_pins>; - heartbeat { + led-heartbeat { label = "overo:red:gpio21"; gpios = <&gpio1 21 GPIO_ACTIVE_LOW>; /* gpio_21 */ linux,default-trigger = "heartbeat"; diff --git a/arch/arm/boot/dts/omap3-overo-tobi-common.dtsi b/arch/arm/boot/dts/omap3-overo-tobi-common.dtsi index 9bf4b88a4b50..5432e4e16ab5 100644 --- a/arch/arm/boot/dts/omap3-overo-tobi-common.dtsi +++ b/arch/arm/boot/dts/omap3-overo-tobi-common.dtsi @@ -13,7 +13,7 @@ / { leds { compatible = "gpio-leds"; - heartbeat { + led-heartbeat { label = "overo:red:gpio21"; gpios = <&gpio1 21 GPIO_ACTIVE_LOW>; linux,default-trigger = "heartbeat"; diff --git a/arch/arm/boot/dts/omap3-zoom3.dts b/arch/arm/boot/dts/omap3-zoom3.dts index 0482676d1830..ce58b1f208e8 100644 --- a/arch/arm/boot/dts/omap3-zoom3.dts +++ b/arch/arm/boot/dts/omap3-zoom3.dts @@ -23,9 +23,9 @@ }; vddvario: regulator-vddvario { - compatible = "regulator-fixed"; - regulator-name = "vddvario"; - regulator-always-on; + compatible = "regulator-fixed"; + regulator-name = "vddvario"; + regulator-always-on; }; vdd33a: regulator-vdd33a { @@ -84,28 +84,28 @@ uart1_pins: pinmux_uart1_pins { pinctrl-single,pins = < - OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT | MUX_MODE0) /* uart1_cts.uart1_cts */ - OMAP3_CORE1_IOPAD(0x217e, PIN_OUTPUT | MUX_MODE0) /* uart1_rts.uart1_rts */ - OMAP3_CORE1_IOPAD(0x2182, WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart1_rx.uart1_rx */ - OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE0) /* uart1_tx.uart1_tx */ + OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT | MUX_MODE0) /* uart1_cts.uart1_cts */ + OMAP3_CORE1_IOPAD(0x217e, PIN_OUTPUT | MUX_MODE0) /* uart1_rts.uart1_rts */ + OMAP3_CORE1_IOPAD(0x2182, WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart1_rx.uart1_rx */ + OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE0) /* uart1_tx.uart1_tx */ >; }; uart2_pins: pinmux_uart2_pins { pinctrl-single,pins = < - OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_cts.uart2_cts */ - OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE0) /* uart2_rts.uart2_rts */ - OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0) /* uart2_rx.uart2_rx */ - OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0) /* uart2_tx.uart2_tx */ + OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_cts.uart2_cts */ + OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE0) /* uart2_rts.uart2_rts */ + OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0) /* uart2_rx.uart2_rx */ + OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0) /* uart2_tx.uart2_tx */ >; }; uart3_pins: pinmux_uart3_pins { pinctrl-single,pins = < - OMAP3_CORE1_IOPAD(0x219a, PIN_INPUT_PULLDOWN | MUX_MODE0) /* uart3_cts_rctx.uart3_cts_rctx */ - OMAP3_CORE1_IOPAD(0x219c, PIN_OUTPUT | MUX_MODE0) /* uart3_rts_sd.uart3_rts_sd */ - OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */ - OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */ + OMAP3_CORE1_IOPAD(0x219a, PIN_INPUT_PULLDOWN | MUX_MODE0) /* uart3_cts_rctx.uart3_cts_rctx */ + OMAP3_CORE1_IOPAD(0x219c, PIN_OUTPUT | MUX_MODE0) /* uart3_rts_sd.uart3_rts_sd */ + OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */ + OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */ >; }; @@ -205,22 +205,22 @@ }; &uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&uart1_pins>; + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; }; &uart2 { - pinctrl-names = "default"; - pinctrl-0 = <&uart2_pins>; + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; }; &uart3 { - pinctrl-names = "default"; - pinctrl-0 = <&uart3_pins>; + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins>; }; &uart4 { - status = "disabled"; + status = "disabled"; }; &usb_otg_hs { diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index 825075ff0e34..92cd4c99dae7 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -893,15 +893,37 @@ #gpio-cells = <2>; }; - usb_otg_hs: usb_otg_hs@480ab000 { - compatible = "ti,omap3-musb"; - reg = <0x480ab000 0x1000>; - interrupts = <92>, <93>; - interrupt-names = "mc", "dma"; - ti,hwmods = "usb_otg_hs"; - multipoint = <1>; - num-eps = <16>; - ram-bits = <12>; + usb_otg_target: target-module@480ab000 { + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x480ab400 0x4>, + <0x480ab404 0x4>, + <0x480ab408 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,syss-mask = <1>; + /* Clock defined in the SoC specific dtsi file */ + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x480ab000 0x1000>; + + usb_otg_hs: usb@0 { + compatible = "ti,omap3-musb"; + reg = <0 0x1000>; + interrupts = <92>, <93>; + interrupt-names = "mc", "dma"; + multipoint = <1>; + num-eps = <16>; + ram-bits = <12>; + }; }; dss: dss@48050000 { diff --git a/arch/arm/boot/dts/omap34xx.dtsi b/arch/arm/boot/dts/omap34xx.dtsi index 2eb73ae7ef3e..9dbf62797f0f 100644 --- a/arch/arm/boot/dts/omap34xx.dtsi +++ b/arch/arm/boot/dts/omap34xx.dtsi @@ -189,6 +189,10 @@ "ssi_ick"; }; +&usb_otg_target { + clocks = <&hsotgusb_ick_3430es2>; +}; + /include/ "omap34xx-omap36xx-clocks.dtsi" /include/ "omap36xx-omap3430es2plus-clocks.dtsi" /include/ "omap36xx-am35xx-omap3430es2plus-clocks.dtsi" diff --git a/arch/arm/boot/dts/omap36xx.dtsi b/arch/arm/boot/dts/omap36xx.dtsi index 32ac7924a130..fff9c3d34193 100644 --- a/arch/arm/boot/dts/omap36xx.dtsi +++ b/arch/arm/boot/dts/omap36xx.dtsi @@ -240,6 +240,10 @@ "ssi_ick"; }; +&usb_otg_target { + clocks = <&hsotgusb_ick_3430es2>; +}; + /include/ "omap34xx-omap36xx-clocks.dtsi" /include/ "omap36xx-omap3430es2plus-clocks.dtsi" /include/ "omap36xx-am35xx-omap3430es2plus-clocks.dtsi" diff --git a/arch/arm/boot/dts/omap4-cpu-thermal.dtsi b/arch/arm/boot/dts/omap4-cpu-thermal.dtsi index 4d7eeb133dad..801b4f10350c 100644 --- a/arch/arm/boot/dts/omap4-cpu-thermal.dtsi +++ b/arch/arm/boot/dts/omap4-cpu-thermal.dtsi @@ -13,20 +13,20 @@ cpu_thermal: cpu_thermal { polling-delay = <1000>; /* milliseconds */ /* sensor ID */ - thermal-sensors = <&bandgap 0>; + thermal-sensors = <&bandgap 0>; cpu_trips: trips { - cpu_alert0: cpu_alert { - temperature = <100000>; /* millicelsius */ - hysteresis = <2000>; /* millicelsius */ - type = "passive"; - }; - cpu_crit: cpu_crit { - temperature = <125000>; /* millicelsius */ - hysteresis = <2000>; /* millicelsius */ - type = "critical"; - }; - }; + cpu_alert0: cpu_alert { + temperature = <100000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "passive"; + }; + cpu_crit: cpu_crit { + temperature = <125000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "critical"; + }; + }; cpu_cooling_maps: cooling-maps { map0 { diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi index 518652a599bd..0269424350aa 100644 --- a/arch/arm/boot/dts/omap4-panda-common.dtsi +++ b/arch/arm/boot/dts/omap4-panda-common.dtsi @@ -49,13 +49,13 @@ &led_wkgpio_pins >; - heartbeat { + led-heartbeat { label = "pandaboard::status1"; gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; }; - mmc { + led-mmc { label = "pandaboard::status2"; gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; linux,default-trigger = "mmc0"; diff --git a/arch/arm/boot/dts/omap4-panda-es.dts b/arch/arm/boot/dts/omap4-panda-es.dts index 7c6886cd738f..7631029e4d7a 100644 --- a/arch/arm/boot/dts/omap4-panda-es.dts +++ b/arch/arm/boot/dts/omap4-panda-es.dts @@ -79,10 +79,10 @@ &led_wkgpio_pins >; - heartbeat { + led-heartbeat { gpios = <&gpio4 14 GPIO_ACTIVE_HIGH>; }; - mmc { + led-mmc { gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; }; }; diff --git a/arch/arm/boot/dts/omap5-cm-t54.dts b/arch/arm/boot/dts/omap5-cm-t54.dts index ca759b7b8a58..2d87b9fc230e 100644 --- a/arch/arm/boot/dts/omap5-cm-t54.dts +++ b/arch/arm/boot/dts/omap5-cm-t54.dts @@ -84,36 +84,36 @@ }; lcd0: display { - compatible = "startek,startek-kd050c", "panel-dpi"; - label = "lcd"; - - pinctrl-names = "default"; - pinctrl-0 = <&lcd_pins>; - - enable-gpios = <&gpio8 3 GPIO_ACTIVE_HIGH>; - - panel-timing { - clock-frequency = <33000000>; - hactive = <800>; - vactive = <480>; - hfront-porch = <40>; - hback-porch = <40>; - hsync-len = <43>; - vback-porch = <29>; - vfront-porch = <13>; - vsync-len = <3>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; - - port { - lcd_in: endpoint { - remote-endpoint = <&dpi_lcd_out>; - }; - }; - }; + compatible = "startek,startek-kd050c", "panel-dpi"; + label = "lcd"; + + pinctrl-names = "default"; + pinctrl-0 = <&lcd_pins>; + + enable-gpios = <&gpio8 3 GPIO_ACTIVE_HIGH>; + + panel-timing { + clock-frequency = <33000000>; + hactive = <800>; + vactive = <480>; + hfront-porch = <40>; + hback-porch = <40>; + hsync-len = <43>; + vback-porch = <29>; + vfront-porch = <13>; + vsync-len = <3>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + + port { + lcd_in: endpoint { + remote-endpoint = <&dpi_lcd_out>; + }; + }; + }; hdmi0: connector0 { compatible = "hdmi-connector"; @@ -644,8 +644,8 @@ }; &usb3 { - extcon = <&extcon_usb3>; - vbus-supply = <&smps10_out1_reg>; + extcon = <&extcon_usb3>; + vbus-supply = <&smps10_out1_reg>; }; &cpu0 { diff --git a/arch/arm/boot/dts/pxa168.dtsi b/arch/arm/boot/dts/pxa168.dtsi index 4fe7735c7c58..16212b912b94 100644 --- a/arch/arm/boot/dts/pxa168.dtsi +++ b/arch/arm/boot/dts/pxa168.dtsi @@ -53,6 +53,8 @@ compatible = "mrvl,mmp-timer"; reg = <0xd4014000 0x100>; interrupts = <13>; + clocks = <&soc_clocks PXA168_CLK_TIMER>; + resets = <&soc_clocks PXA168_CLK_TIMER>; }; uart1: serial@d4017000 { diff --git a/arch/arm/boot/dts/qcom-apq8026-asus-sparrow.dts b/arch/arm/boot/dts/qcom-apq8026-asus-sparrow.dts index 215613c65250..7a80e1c9f126 100644 --- a/arch/arm/boot/dts/qcom-apq8026-asus-sparrow.dts +++ b/arch/arm/boot/dts/qcom-apq8026-asus-sparrow.dts @@ -87,7 +87,7 @@ }; &rpm_requests { - pm8226-regulators { + regulators { compatible = "qcom,rpm-pm8226-regulators"; pm8226_s3: s3 { diff --git a/arch/arm/boot/dts/qcom-apq8026-huawei-sturgeon.dts b/arch/arm/boot/dts/qcom-apq8026-huawei-sturgeon.dts new file mode 100644 index 000000000000..d64096028ab1 --- /dev/null +++ b/arch/arm/boot/dts/qcom-apq8026-huawei-sturgeon.dts @@ -0,0 +1,376 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2022, Luca Weiss <luca@z3ntu.xyz> + */ + +/dts-v1/; + +#include "qcom-msm8226.dtsi" +#include "qcom-pm8226.dtsi" + +/delete-node/ &adsp_region; + +/ { + model = "Huawei Watch"; + compatible = "huawei,sturgeon", "qcom,apq8026"; + chassis-type = "watch"; + qcom,msm-id = <199 0x20000>; + qcom,board-id = <8 4>; + + reserved-memory { + sbl_region: sbl@2f00000 { + reg = <0x02f00000 0x100000>; + no-map; + }; + + external_image_region: external-image@3100000 { + reg = <0x3100000 0x200000>; + no-map; + }; + + peripheral_region: peripheral@3300000 { + reg = <0x3300000 0x600000>; + no-map; + }; + + adsp_region: adsp@3900000 { + reg = <0x3900000 0x1400000>; + no-map; + }; + + modem_region: modem@4d00000 { + reg = <0x4d00000 0x1b00000>; + no-map; + }; + + modem_efs_region: modem-efs@7f00000 { + reg = <0x7f00000 0x100000>; + no-map; + }; + }; + + vreg_wlan: wlan-regulator { + compatible = "regulator-fixed"; + + regulator-name = "wl-reg"; + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + + gpio = <&tlmm 110 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&wlan_regulator_default_state>; + }; +}; + +&adsp { + status = "okay"; +}; + +&blsp1_i2c5 { + clock-frequency = <384000>; + + status = "okay"; + + touchscreen@20 { + compatible = "syna,rmi4-i2c"; + reg = <0x20>; + + interrupts-extended = <&tlmm 17 IRQ_TYPE_EDGE_FALLING>; + vdd-supply = <&pm8226_l19>; + vio-supply = <&pm8226_lvs1>; + + pinctrl-names = "default"; + pinctrl-0 = <&touch_default_state>; + + syna,startup-delay-ms = <160>; + + #address-cells = <1>; + #size-cells = <0>; + + rmi4-f01@1 { + reg = <0x1>; + syna,nosleep-mode = <1>; + }; + + rmi4-f12@12 { + reg = <0x12>; + syna,sensor-type = <1>; + }; + }; +}; + +&blsp1_uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&blsp1_uart4_default_state>; + + status = "okay"; + + bluetooth { + compatible = "brcm,bcm43430a0-bt"; + max-speed = <3000000>; + + pinctrl-names = "default"; + pinctrl-0 = <&bluetooth_default_state>; + + host-wakeup-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>; + device-wakeup-gpios = <&tlmm 63 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&tlmm 67 GPIO_ACTIVE_HIGH>; + }; +}; + +&rpm_requests { + regulators { + compatible = "qcom,rpm-pm8226-regulators"; + + pm8226_s3: s3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1300000>; + }; + + pm8226_s4: s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2200000>; + }; + + pm8226_s5: s5 { + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + }; + + pm8226_l1: l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + pm8226_l2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8226_l3: l3 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1337500>; + }; + + pm8226_l4: l4 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8226_l5: l5 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8226_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8226_l7: l7 { + regulator-min-microvolt = <1850000>; + regulator-max-microvolt = <1850000>; + }; + + pm8226_l8: l8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8226_l9: l9 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + pm8226_l10: l10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8226_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8226_l14: l14 { + regulator-min-microvolt = <2750000>; + regulator-max-microvolt = <2750000>; + }; + + pm8226_l15: l15 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + pm8226_l16: l16 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3350000>; + }; + + pm8226_l17: l17 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + }; + + pm8226_l18: l18 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + }; + + pm8226_l19: l19 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + pm8226_l20: l20 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + + pm8226_l21: l21 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8226_l22: l22 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8226_l23: l23 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8226_l24: l24 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1350000>; + }; + + pm8226_l25: l25 { + regulator-min-microvolt = <1775000>; + regulator-max-microvolt = <2125000>; + }; + + pm8226_l26: l26 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + pm8226_l27: l27 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + pm8226_l28: l28 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8226_lvs1: lvs1 {}; + }; +}; + +&sdhc_1 { + vmmc-supply = <&pm8226_l17>; + vqmmc-supply = <&pm8226_l6>; + + bus-width = <8>; + non-removable; + + status = "okay"; +}; + +&sdhc_3 { + max-frequency = <100000000>; + non-removable; + + vmmc-supply = <&vreg_wlan>; + vqmmc-supply = <&pm8226_l6>; + + #address-cells = <1>; + #size-cells = <0>; + + status = "okay"; + + wifi@1 { + compatible = "brcm,bcm43430a0-fmac", "brcm,bcm4329-fmac"; + reg = <1>; + + interrupts-extended = <&tlmm 66 IRQ_TYPE_EDGE_FALLING>; + interrupt-names = "host-wake"; + + pinctrl-names = "default"; + pinctrl-0 = <&wlan_hostwake_default_state>; + }; +}; + +&smbb { + qcom,fast-charge-safe-voltage = <4370000>; + qcom,fast-charge-high-threshold-voltage = <4350000>; + qcom,minimum-input-voltage = <4350000>; + qcom,fast-charge-current-limit = <300000>; + qcom,fast-charge-safe-current = <600000>; + qcom,auto-recharge-threshold-voltage = <4240000>; +}; + +&tlmm { + blsp1_uart4_default_state: blsp1-uart4-default-state { + pins = "gpio12", "gpio13", "gpio14", "gpio15"; + function = "blsp_uart4"; + drive-strength = <8>; + bias-disable; + }; + + bluetooth_default_state: bluetooth-default-state { + pins = "gpio63", "gpio64"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + touch_default_state: touch-default-state { + irq-pins { + pins = "gpio17"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + }; + + reset-pins { + pins = "gpio16"; + function = "gpio"; + drive-strength = <6>; + bias-pull-up; + }; + }; + + wlan_hostwake_default_state: wlan-hostwake-default-state { + pins = "gpio66"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + input-enable; + }; + + wlan_regulator_default_state: wlan-regulator-default-state { + pins = "gpio110"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; +}; + +&usb { + extcon = <&smbb>; + dr_mode = "peripheral"; + status = "okay"; +}; + +&usb_hs_phy { + extcon = <&smbb>; + v1p8-supply = <&pm8226_l10>; + v3p3-supply = <&pm8226_l20>; +}; diff --git a/arch/arm/boot/dts/qcom-apq8026-lg-lenok.dts b/arch/arm/boot/dts/qcom-apq8026-lg-lenok.dts index 193569f0ca5f..de2fb1c01b6e 100644 --- a/arch/arm/boot/dts/qcom-apq8026-lg-lenok.dts +++ b/arch/arm/boot/dts/qcom-apq8026-lg-lenok.dts @@ -13,6 +13,7 @@ / { model = "LG G Watch R"; compatible = "lg,lenok", "qcom,apq8026"; + chassis-type = "watch"; qcom,board-id = <132 0x0a>; qcom,msm-id = <199 0x20000>; @@ -115,7 +116,7 @@ }; &rpm_requests { - pm8226-regulators { + regulators { compatible = "qcom,rpm-pm8226-regulators"; pm8226_s3: s3 { @@ -299,8 +300,8 @@ input-enable; }; - touch_pins: touch { - irq { + touch_pins: touch-state { + irq-pins { pins = "gpio17"; function = "gpio"; @@ -309,7 +310,7 @@ input-enable; }; - reset { + reset-pins { pins = "gpio16"; function = "gpio"; diff --git a/arch/arm/boot/dts/qcom-apq8026-samsung-matisse-wifi.dts b/arch/arm/boot/dts/qcom-apq8026-samsung-matisse-wifi.dts new file mode 100644 index 000000000000..1c52337af560 --- /dev/null +++ b/arch/arm/boot/dts/qcom-apq8026-samsung-matisse-wifi.dts @@ -0,0 +1,453 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2022, Matti Lehtimäki <matti.lehtimaki@gmail.com> + */ + +/dts-v1/; + +#include <dt-bindings/input/input.h> +#include "qcom-msm8226.dtsi" +#include "qcom-pm8226.dtsi" + +/ { + model = "Samsung Galaxy Tab 4 10.1"; + compatible = "samsung,matisse-wifi", "qcom,apq8026"; + chassis-type = "tablet"; + + aliases { + mmc0 = &sdhc_1; /* SDC1 eMMC slot */ + mmc1 = &sdhc_2; /* SDC2 SD card slot */ + display0 = &framebuffer0; + }; + + chosen { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + stdout-path = "display0"; + + framebuffer0: framebuffer@3200000 { + compatible = "simple-framebuffer"; + reg = <0x03200000 0x800000>; + width = <1280>; + height = <800>; + stride = <(1280 * 3)>; + format = "r8g8b8"; + }; + }; + + gpio-hall-sensor { + compatible = "gpio-keys"; + + event-hall-sensor { + label = "Hall Effect Sensor"; + gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>; + interrupts = <&tlmm 110 IRQ_TYPE_EDGE_FALLING>; + linux,input-type = <EV_SW>; + linux,code = <SW_LID>; + debounce-interval = <15>; + wakeup-source; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + autorepeat; + + key-home { + label = "Home"; + gpios = <&tlmm 108 GPIO_ACTIVE_LOW>; + linux,code = <KEY_HOMEPAGE>; + debounce-interval = <15>; + }; + + key-volume-down { + label = "Volume Down"; + gpios = <&tlmm 107 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEDOWN>; + debounce-interval = <15>; + }; + + key-volume-up { + label = "Volume Up"; + gpios = <&tlmm 106 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + debounce-interval = <15>; + }; + }; + + reg_tsp_1p8v: regulator-tsp-1p8v { + compatible = "regulator-fixed"; + regulator-name = "tsp_1p8v"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + gpio = <&tlmm 31 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&tsp_en_default_state>; + }; + + reg_tsp_3p3v: regulator-tsp-3p3v { + compatible = "regulator-fixed"; + regulator-name = "tsp_3p3v"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 73 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&tsp_en1_default_state>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + framebuffer@3200000 { + reg = <0x03200000 0x800000>; + no-map; + }; + + mpss@8400000 { + reg = <0x08400000 0x1f00000>; + no-map; + }; + + mba@a300000 { + reg = <0x0a300000 0x100000>; + no-map; + }; + + reserved@cb00000 { + reg = <0x0cb00000 0x700000>; + no-map; + }; + + wcnss@d200000 { + reg = <0x0d200000 0x700000>; + no-map; + }; + + adsp@d900000 { + reg = <0x0d900000 0x1800000>; + no-map; + }; + + venus@f100000 { + reg = <0x0f100000 0x500000>; + no-map; + }; + + /delete-node/ smem@3000000; + smem_region: smem@fa00000 { + reg = <0x0fa00000 0x100000>; + no-map; + }; + + reserved@fb00000 { + reg = <0x0fb00000 0x260000>; + no-map; + }; + + rfsa@fd60000 { + reg = <0x0fd60000 0x20000>; + no-map; + }; + + rmtfs@fd80000 { + compatible = "qcom,rmtfs-mem"; + reg = <0x0fd80000 0x180000>; + no-map; + + qcom,client-id = <1>; + }; + }; +}; + +&blsp1_i2c2 { + status = "okay"; + + accelerometer@1d { + compatible = "st,lis2hh12"; + reg = <0x1d>; + + interrupt-parent = <&tlmm>; + interrupts = <54 IRQ_TYPE_LEVEL_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&accel_int_default_state>; + + st,drdy-int-pin = <1>; + + vdd-supply = <&pm8226_l19>; + vddio-supply = <&pm8226_lvs1>; + }; +}; + +&blsp1_i2c4 { + status = "okay"; + + muic: usb-switch@25 { + compatible = "siliconmitus,sm5502-muic"; + reg = <0x25>; + + interrupt-parent = <&tlmm>; + interrupts = <67 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-names = "default"; + pinctrl-0 = <&muic_int_default_state>; + }; +}; + +&blsp1_i2c5 { + status = "okay"; + + touchscreen@4a { + compatible = "atmel,maxtouch"; + reg = <0x4a>; + + interrupt-parent = <&tlmm>; + interrupts = <17 IRQ_TYPE_LEVEL_LOW>; + + pinctrl-names = "default"; + pinctrl-0 = <&tsp_int_rst_default_state>; + + reset-gpios = <&pm8226_gpios 6 GPIO_ACTIVE_LOW>; + + vdd-supply = <®_tsp_1p8v>; + vdda-supply = <®_tsp_3p3v>; + }; +}; + +&rpm_requests { + regulators { + compatible = "qcom,rpm-pm8226-regulators"; + + pm8226_s3: s3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1300000>; + }; + + pm8226_s4: s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8226_s5: s5 { + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + }; + + pm8226_l1: l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + pm8226_l2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8226_l3: l3 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1337500>; + regulator-always-on; + }; + + pm8226_l4: l4 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8226_l5: l5 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8226_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + pm8226_l7: l7 { + regulator-min-microvolt = <1850000>; + regulator-max-microvolt = <1850000>; + }; + + pm8226_l8: l8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + pm8226_l9: l9 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + pm8226_l10: l10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8226_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8226_l14: l14 { + regulator-min-microvolt = <2750000>; + regulator-max-microvolt = <2750000>; + }; + + pm8226_l15: l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + pm8226_l16: l16 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3350000>; + }; + + pm8226_l17: l17 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + + regulator-system-load = <200000>; + regulator-allow-set-load; + regulator-always-on; + }; + + pm8226_l18: l18 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + }; + + pm8226_l19: l19 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <3000000>; + }; + + pm8226_l20: l20 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + + pm8226_l21: l21 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8226_l22: l22 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + }; + + pm8226_l23: l23 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + pm8226_l24: l24 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1350000>; + }; + + pm8226_l25: l25 { + regulator-min-microvolt = <1775000>; + regulator-max-microvolt = <2125000>; + }; + + pm8226_l26: l26 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1300000>; + }; + + pm8226_l27: l27 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8226_l28: l28 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8226_lvs1: lvs1 {}; + }; +}; + +&sdhc_1 { + vmmc-supply = <&pm8226_l17>; + vqmmc-supply = <&pm8226_l6>; + + bus-width = <8>; + non-removable; + + status = "okay"; +}; + +&sdhc_2 { + vmmc-supply = <&pm8226_l18>; + vqmmc-supply = <&pm8226_l21>; + + bus-width = <4>; + cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; + + status = "okay"; +}; + +&tlmm { + accel_int_default_state: accel-int-default-state { + pins = "gpio54"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + muic_int_default_state: muic-int-default-state { + pins = "gpio67"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + tsp_en_default_state: tsp-en-default-state { + pins = "gpio31"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + tsp_en1_default_state: tsp-en1-default-state { + pins = "gpio73"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + tsp_int_rst_default_state: tsp-int-rst-default-state { + pins = "gpio17"; + function = "gpio"; + drive-strength = <10>; + bias-pull-up; + }; +}; + +&usb { + extcon = <&muic>, <&muic>; + status = "okay"; +}; + +&usb_hs_phy { + extcon = <&muic>; + v1p8-supply = <&pm8226_l10>; + v3p3-supply = <&pm8226_l20>; +}; diff --git a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts index 573e4dc66bb0..7a4c59e04af6 100644 --- a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts +++ b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts @@ -81,931 +81,899 @@ pinctrl-names = "default"; pinctrl-0 = <&dragon_cm3605_gpios>, <&dragon_cm3605_mpps>; }; +}; - soc { - pinctrl@800000 { - /* eMMC pins, all 8 data lines connected */ - dragon_sdcc1_pins: sdcc1 { - mux { - pins = "gpio159", "gpio160", "gpio161", - "gpio162", "gpio163", "gpio164", - "gpio165", "gpio166", "gpio167", - "gpio168"; - function = "sdc1"; - }; - clk { - pins = "gpio167"; /* SDC1 CLK */ - drive-strength = <16>; - bias-disable; - }; - cmd { - pins = "gpio168"; /* SDC1 CMD */ - drive-strength = <10>; - bias-pull-up; - }; - data { - /* SDC1 D0 to D7 */ - pins = "gpio159", "gpio160", "gpio161", "gpio162", - "gpio163", "gpio164", "gpio165", "gpio166"; - drive-strength = <10>; - bias-pull-up; - }; - }; +&ebi2 { + /* The EBI2 will instantiate first, then populate its children */ + pinctrl-names = "default"; + pinctrl-0 = <&dragon_ebi2_pins>; + status = "okay"; - /* - * The SDCC3 pins are hardcoded (non-muxable) but need some pin - * configuration. - */ - dragon_sdcc3_pins: sdcc3 { - clk { - pins = "sdc3_clk"; - drive-strength = <8>; - bias-disable; - }; - cmd { - pins = "sdc3_cmd"; - drive-strength = <8>; - bias-pull-up; - }; - data { - pins = "sdc3_data"; - drive-strength = <8>; - bias-pull-up; - }; - }; + /* + * An on-board SMSC LAN9221 chip for "debug ethernet", + * which is actually just an ordinary ethernet on the + * EBI2. This has a 25MHz chrystal next to it, so no + * clocking is needed. + */ + ethernet@2,0 { + compatible = "smsc,lan9221", "smsc,lan9115"; + reg = <2 0x0 0x100>; + /* + * The second interrupt is the PME interrupt + * for network wakeup, connected to the TLMM. + */ + interrupts-extended = <&pm8058_gpio 7 IRQ_TYPE_EDGE_FALLING>, + <&tlmm 29 IRQ_TYPE_EDGE_RISING>; + reset-gpios = <&tlmm 30 GPIO_ACTIVE_LOW>; + vdd33a-supply = <&dragon_veth>; + vddvario-supply = <&dragon_vario>; + pinctrl-names = "default"; + pinctrl-0 = <&dragon_ethernet_gpios>; + phy-mode = "mii"; + reg-io-width = <2>; + smsc,force-external-phy; + smsc,irq-push-pull; + + /* + * SLOW chipselect config + * Delay 9 cycles (140ns@64MHz) between SMSC + * LAN9221 Ethernet controller reads and writes + * on CS2. + */ + qcom,xmem-recovery-cycles = <0>; + qcom,xmem-write-hold-cycles = <3>; + qcom,xmem-write-delta-cycles = <31>; + qcom,xmem-read-delta-cycles = <28>; + qcom,xmem-write-wait-cycles = <9>; + qcom,xmem-read-wait-cycles = <9>; + }; +}; - /* Second SD card slot pins */ - dragon_sdcc5_pins: sdcc5 { - mux { - pins = "gpio95", "gpio96", "gpio97", - "gpio98", "gpio99", "gpio100"; - function = "sdc5"; - }; - clk { - pins = "gpio97"; /* SDC5 CLK */ - drive-strength = <16>; - bias-disable; - }; - cmd { - pins = "gpio95"; /* SDC5 CMD */ - drive-strength = <10>; - bias-pull-up; - }; - data { - /* SDC5 D0 to D3 */ - pins = "gpio96", "gpio98", "gpio99", "gpio100"; - drive-strength = <10>; - bias-pull-up; - }; - }; +&gsbi3 { + qcom,mode = <GSBI_PROT_I2C>; + status = "okay"; +}; - dragon_gsbi3_i2c_pins: gsbi3_i2c { - mux { - pins = "gpio43", "gpio44"; - function = "gsbi3"; - }; - pinconf { - pins = "gpio43", "gpio44"; - drive-strength = <8>; - /* These have external pull-up 2.2kOhm to 1.8V */ - bias-disable; - }; - }; +&gsbi3_i2c { + pinctrl-names = "default"; + pinctrl-0 = <&dragon_gsbi3_i2c_pins>; + status = "okay"; + + touchscreen@24 { + compatible = "cypress,cy8ctma340"; + reg = <0x24>; + /* Certainly we can do at least 400 kHz */ + clock-frequency = <400000>; + /* IRQ on GPIO61 called /CTP_INT */ + interrupt-parent = <&tlmm>; + interrupts = <61 IRQ_TYPE_EDGE_FALLING>; + /* + * The I2C bus is using a PCA9306 level translator from L16A + * to L2B so these two voltages are needed and L16A is + * kind of the IO voltage, however L16Aisn't really fed to + * the TMA340, which relies entirely on L2B (PM8901 L2). + */ + vcpin-supply = <&pm8058_l16>; + vdd-supply = <&pm8901_l2>; + /* GPIO58, called WAKE_CTP */ + reset-gpios = <&tlmm 58 GPIO_ACTIVE_LOW>; + touchscreen-size-x = <480>; + touchscreen-size-y = <800>; + active-interval-ms = <0>; + touch-timeout-ms = <255>; + lowpower-interval-ms = <10>; + bootloader-key = /bits/ 8 <0x00 0x01 0x02 0x03 0x04 0x05 0x06 0x07>; + pinctrl-names = "default"; + pinctrl-0 = <&dragon_tma340_gpios>; + }; +}; - dragon_gsbi8_i2c_pins: gsbi8_i2c { - mux { - pins = "gpio64", "gpio65"; - function = "gsbi8"; - }; - pinconf { - pins = "gpio64", "gpio65"; - drive-strength = <16>; - /* These have external pull-up 2.2kOhm to 1.8V */ - bias-disable; - }; - }; +&gsbi8 { + qcom,mode = <GSBI_PROT_I2C>; + status = "okay"; +}; - dragon_gsbi12_i2c_pins: gsbi12_i2c { - mux { - pins = "gpio115", "gpio116"; - function = "gsbi12"; - }; - pinconf { - pins = "gpio115", "gpio116"; - drive-strength = <16>; - /* These have external pull-up 4.7kOhm to 1.8V */ - bias-disable; - }; - }; +&gsbi8_i2c { + pinctrl-names = "default"; + pinctrl-0 = <&dragon_gsbi8_i2c_pins>; + status = "okay"; + + eeprom@52 { + /* A 16KiB Platform ID EEPROM on the CPU carrier board */ + compatible = "atmel,24c128"; + reg = <0x52>; + vcc-supply = <&pm8058_s3>; + pagesize = <64>; + }; + wm8903: wm8903@1a { + /* This Woolfson Micro device has an unrouted interrupt line */ + compatible = "wlf,wm8903"; + reg = <0x1a>; + + AVDD-supply = <&pm8058_l16>; + CPVDD-supply = <&pm8058_l16>; + DBVDD-supply = <&pm8058_s3>; + DCVDD-supply = <&pm8058_l0>; + + gpio-controller; + #gpio-cells = <2>; + + micdet-cfg = <0>; + micdet-delay = <100>; + gpio-cfg = <0xffffffff 0xffffffff 0 0xffffffff 0xffffffff>; + }; +}; - /* Primary serial port uart 0 pins */ - dragon_gsbi12_serial_pins: gsbi12_serial { - mux { - pins = "gpio117", "gpio118"; - function = "gsbi12"; - }; - tx { - pins = "gpio117"; - drive-strength = <8>; - bias-disable; - }; - rx { - pins = "gpio118"; - drive-strength = <2>; - bias-pull-up; - }; - }; +&gsbi12 { + qcom,mode = <GSBI_PROT_I2C_UART>; + status = "okay"; +}; - dragon_ebi2_pins: ebi2 { - /* - * Pins used by EBI2 on the Dragonboard, actually only - * CS2 is used by a real peripheral. CS0 is just - * routed to a test point. - */ - mux0 { - pins = - /* "gpio39", CS1A_N this is not good to mux */ - "gpio40", /* CS2A_N */ - "gpio134"; /* CS0_N testpoint TP29 */ - function = "ebi2cs"; - }; - mux1 { - pins = - /* EBI2_ADDR_7 downto EBI2_ADDR_0 address bus */ - "gpio123", "gpio124", "gpio125", "gpio126", - "gpio127", "gpio128", "gpio129", "gpio130", - /* EBI2_DATA_15 downto EBI2_DATA_0 data bus */ - "gpio135", "gpio136", "gpio137", "gpio138", - "gpio139", "gpio140", "gpio141", "gpio142", - "gpio143", "gpio144", "gpio145", "gpio146", - "gpio147", "gpio148", "gpio149", "gpio150", - "gpio151", /* EBI2_OE_N */ - "gpio153", /* EBI2_ADV */ - "gpio157"; /* EBI2_WE_N */ - function = "ebi2"; - }; - }; +&gsbi12_serial { + pinctrl-names = "default"; + pinctrl-0 = <&dragon_gsbi12_serial_pins>; + status = "okay"; +}; - /* Interrupt line for the KXSD9 accelerometer */ - dragon_kxsd9_gpios: kxsd9 { - irq { - pins = "gpio57"; /* IRQ line */ - bias-pull-up; - }; - }; +&gsbi12_i2c { + pinctrl-names = "default"; + pinctrl-0 = <&dragon_gsbi12_i2c_pins>; + status = "okay"; + + ak8975@c { + compatible = "asahi-kasei,ak8975"; + reg = <0x0c>; + interrupt-parent = <&pm8058_gpio>; + interrupts = <33 IRQ_TYPE_EDGE_RISING>; + pinctrl-names = "default"; + pinctrl-0 = <&dragon_ak8975_gpios>; + vid-supply = <&pm8058_lvs0>; // 1.8V + vdd-supply = <&pm8058_l14>; // 2.85V + }; + bmp085@77 { + compatible = "bosch,bmp085"; + reg = <0x77>; + interrupt-parent = <&pm8058_gpio>; + interrupts = <16 IRQ_TYPE_EDGE_RISING>; + reset-gpios = <&tlmm 86 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&dragon_bmp085_gpios>; + vddd-supply = <&pm8058_lvs0>; // 1.8V + vdda-supply = <&pm8058_l14>; // 2.85V + }; + mpu3050@68 { + compatible = "invensense,mpu3050"; + reg = <0x68>; + /* + * GPIO17 is pulled high by a 10k + * resistor to VLOGIC so needs to be + * active low/falling edge. + */ + interrupts-extended = <&pm8058_gpio 17 IRQ_TYPE_EDGE_FALLING>; + pinctrl-names = "default"; + pinctrl-0 = <&dragon_mpu3050_gpios>; + vlogic-supply = <&pm8058_lvs0>; // 1.8V + vdd-supply = <&pm8058_l14>; // 2.85V - dragon_tma340_gpios: tma340 { - reset { - /* RESET line, TS_ATTN, WAKE_CTP */ - pins = "gpio58"; - function = "gpio"; - drive-strength = <6>; - bias-disable; - }; - irq { - pins = "gpio61"; /* IRQ line */ - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; + /* + * The MPU-3050 acts as a hub for the + * accelerometer. + */ + i2c-gate { + #address-cells = <1>; + #size-cells = <0>; + + kxsd9@18 { + compatible = "kionix,kxsd9"; + reg = <0x18>; + interrupt-parent = <&tlmm>; + interrupts = <57 IRQ_TYPE_EDGE_FALLING>; + pinctrl-names = "default"; + pinctrl-0 = <&dragon_kxsd9_gpios>; + iovdd-supply = <&pm8058_lvs0>; // 1.8V + vdd-supply = <&pm8058_l14>; // 2.85V }; }; + }; +}; - qcom,ssbi@500000 { - pmic@0 { - keypad@148 { - linux,keymap = < - MATRIX_KEY(0, 0, KEY_MENU) - MATRIX_KEY(0, 2, KEY_1) - MATRIX_KEY(0, 3, KEY_4) - MATRIX_KEY(0, 4, KEY_7) - MATRIX_KEY(1, 0, KEY_UP) - MATRIX_KEY(1, 1, KEY_LEFT) - MATRIX_KEY(1, 2, KEY_DOWN) - MATRIX_KEY(1, 3, KEY_5) - MATRIX_KEY(1, 3, KEY_8) - MATRIX_KEY(2, 0, KEY_HOME) - MATRIX_KEY(2, 1, KEY_REPLY) - MATRIX_KEY(2, 2, KEY_2) - MATRIX_KEY(2, 3, KEY_6) - MATRIX_KEY(3, 0, KEY_VOLUMEUP) - MATRIX_KEY(3, 1, KEY_RIGHT) - MATRIX_KEY(3, 2, KEY_3) - MATRIX_KEY(3, 3, KEY_9) - MATRIX_KEY(3, 4, KEY_SWITCHVIDEOMODE) - MATRIX_KEY(4, 0, KEY_VOLUMEDOWN) - MATRIX_KEY(4, 1, KEY_BACK) - MATRIX_KEY(4, 2, KEY_CAMERA) - MATRIX_KEY(4, 3, KEY_KBDILLUMTOGGLE) - >; - keypad,num-rows = <6>; - keypad,num-columns = <5>; - }; - - gpio@150 { - dragon_ethernet_gpios: ethernet-state { - pinconf { - pins = "gpio7"; - function = "normal"; - input-enable; - bias-disable; - power-source = <PM8058_GPIO_S3>; - }; - }; - dragon_bmp085_gpios: bmp085-state { - pinconf { - pins = "gpio16"; - function = "normal"; - input-enable; - bias-disable; - power-source = <PM8058_GPIO_S3>; - }; - }; - dragon_mpu3050_gpios: mpu3050-state { - pinconf { - pins = "gpio17"; - function = "normal"; - input-enable; - bias-disable; - power-source = <PM8058_GPIO_S3>; - }; - }; - dragon_sdcc3_gpios: sdcc3-state { - pinconf { - pins = "gpio22"; - function = "normal"; - input-enable; - bias-disable; - power-source = <PM8058_GPIO_S3>; - }; - }; - dragon_sdcc5_gpios: sdcc5-state { - pinconf { - pins = "gpio26"; - function = "normal"; - input-enable; - bias-pull-up; - qcom,pull-up-strength = <PMIC_GPIO_PULL_UP_30>; - power-source = <PM8058_GPIO_S3>; - }; - }; - dragon_ak8975_gpios: ak8975-state { - pinconf { - pins = "gpio33"; - function = "normal"; - input-enable; - bias-disable; - power-source = <PM8058_GPIO_S3>; - }; - }; - dragon_cm3605_gpios: cm3605-state { - /* Pin 34 connected to the proxy IRQ */ - gpio34-pins { - pins = "gpio34"; - function = "normal"; - input-enable; - bias-disable; - power-source = <PM8058_GPIO_S3>; - }; - /* Pin 35 connected to ASET */ - gpio35-pins { - pins = "gpio35"; - function = "normal"; - output-high; - bias-disable; - power-source = <PM8058_GPIO_S3>; - }; - }; - dragon_veth_gpios: veth-state { - pinconf { - pins = "gpio40"; - function = "normal"; - bias-disable; - drive-push-pull; - }; - }; - }; - - mpps@50 { - dragon_cm3605_mpps: cm3605-mpps-state { - mpp5 { - pins = "mpp5"; - function = "analog"; - input-enable; - bias-high-impedance; - /* Let's use channel 5 */ - qcom,amux-route = <PMIC_MPP_AMUX_ROUTE_CH5>; - power-source = <PM8058_GPIO_S3>; - }; - }; - }; - - xoadc@197 { - /* Reference voltage 2.2 V */ - xoadc-ref-supply = <&pm8058_l18>; - - /* Board-specific channels */ - mpp5@5 { - /* Connected to AOUT of ALS sensor */ - reg = <0x00 0x05>; - }; - mpp6@6 { - /* Connected to test point TP43 */ - reg = <0x00 0x06>; - }; - mpp7@7 { - /* Connected to battery thermistor */ - reg = <0x00 0x07>; - }; - mpp8@8 { - /* Connected to battery ID detector */ - reg = <0x00 0x08>; - }; - mpp9@9 { - /* Connected to XO thermistor */ - reg = <0x00 0x09>; - }; - }; - - led@48 { - /* - * The keypad LED @0x48 is routed to - * the sensor board where it is - * connected to an infrared LED - * SFH4650 (60mW, @850nm) next to the - * ambient light and proximity sensor - * Capella Microsystems CM3605. - */ - compatible = "qcom,pm8058-keypad-led"; - reg = <0x48>; - label = "pm8058:infrared:proximitysensor"; - default-state = "off"; - linux,default-trigger = "cm3605"; - }; - led@131 { - compatible = "qcom,pm8058-led"; - reg = <0x131>; - label = "pm8058:red"; - color = <LED_COLOR_ID_RED>; - default-state = "off"; - }; - led@132 { - /* - * This is actually green too on my - * board, but documented as yellow. - */ - compatible = "qcom,pm8058-led"; - reg = <0x132>; - label = "pm8058:yellow"; - color = <LED_COLOR_ID_YELLOW>; - default-state = "off"; - linux,default-trigger = "mmc0"; - }; - led@133 { - compatible = "qcom,pm8058-led"; - reg = <0x133>; - label = "pm8058:green"; - function = LED_FUNCTION_HEARTBEAT; - color = <LED_COLOR_ID_GREEN>; - default-state = "on"; - linux,default-trigger = "heartbeat"; - }; - }; +&pm8058_gpio { + dragon_ethernet_gpios: ethernet-state { + pinconf { + pins = "gpio7"; + function = "normal"; + input-enable; + bias-disable; + power-source = <PM8058_GPIO_S3>; + }; + }; + dragon_bmp085_gpios: bmp085-state { + pinconf { + pins = "gpio16"; + function = "normal"; + input-enable; + bias-disable; + power-source = <PM8058_GPIO_S3>; + }; + }; + dragon_mpu3050_gpios: mpu3050-state { + pinconf { + pins = "gpio17"; + function = "normal"; + input-enable; + bias-disable; + power-source = <PM8058_GPIO_S3>; + }; + }; + dragon_sdcc3_gpios: sdcc3-state { + pinconf { + pins = "gpio22"; + function = "normal"; + input-enable; + bias-disable; + power-source = <PM8058_GPIO_S3>; + }; + }; + dragon_sdcc5_gpios: sdcc5-state { + pinconf { + pins = "gpio26"; + function = "normal"; + input-enable; + bias-pull-up; + qcom,pull-up-strength = <PMIC_GPIO_PULL_UP_30>; + power-source = <PM8058_GPIO_S3>; + }; + }; + dragon_ak8975_gpios: ak8975-state { + pinconf { + pins = "gpio33"; + function = "normal"; + input-enable; + bias-disable; + power-source = <PM8058_GPIO_S3>; + }; + }; + dragon_cm3605_gpios: cm3605-state { + /* Pin 34 connected to the proxy IRQ */ + gpio34-pins { + pins = "gpio34"; + function = "normal"; + input-enable; + bias-disable; + power-source = <PM8058_GPIO_S3>; + }; + /* Pin 35 connected to ASET */ + gpio35-pins { + pins = "gpio35"; + function = "normal"; + output-high; + bias-disable; + power-source = <PM8058_GPIO_S3>; + }; + }; + dragon_veth_gpios: veth-state { + pinconf { + pins = "gpio40"; + function = "normal"; + bias-disable; + drive-push-pull; }; + }; +}; - gsbi@16200000 { - qcom,mode = <GSBI_PROT_I2C>; - status = "okay"; +&pm8058_keypad { + linux,keymap = < + MATRIX_KEY(0, 0, KEY_MENU) + MATRIX_KEY(0, 2, KEY_1) + MATRIX_KEY(0, 3, KEY_4) + MATRIX_KEY(0, 4, KEY_7) + MATRIX_KEY(1, 0, KEY_UP) + MATRIX_KEY(1, 1, KEY_LEFT) + MATRIX_KEY(1, 2, KEY_DOWN) + MATRIX_KEY(1, 3, KEY_5) + MATRIX_KEY(1, 3, KEY_8) + MATRIX_KEY(2, 0, KEY_HOME) + MATRIX_KEY(2, 1, KEY_REPLY) + MATRIX_KEY(2, 2, KEY_2) + MATRIX_KEY(2, 3, KEY_6) + MATRIX_KEY(3, 0, KEY_VOLUMEUP) + MATRIX_KEY(3, 1, KEY_RIGHT) + MATRIX_KEY(3, 2, KEY_3) + MATRIX_KEY(3, 3, KEY_9) + MATRIX_KEY(3, 4, KEY_SWITCHVIDEOMODE) + MATRIX_KEY(4, 0, KEY_VOLUMEDOWN) + MATRIX_KEY(4, 1, KEY_BACK) + MATRIX_KEY(4, 2, KEY_CAMERA) + MATRIX_KEY(4, 3, KEY_KBDILLUMTOGGLE) + >; + keypad,num-rows = <6>; + keypad,num-columns = <5>; +}; - gsbi3_i2c: i2c@16280000 { - pinctrl-names = "default"; - pinctrl-0 = <&dragon_gsbi3_i2c_pins>; - status = "okay"; - - touchscreen@24 { - compatible = "cypress,cy8ctma340"; - reg = <0x24>; - /* Certainly we can do at least 400 kHz */ - clock-frequency = <400000>; - /* IRQ on GPIO61 called /CTP_INT */ - interrupt-parent = <&tlmm>; - interrupts = <61 IRQ_TYPE_EDGE_FALLING>; - /* - * The I2C bus is using a PCA9306 level translator from L16A - * to L2B so these two voltages are needed and L16A is - * kind of the IO voltage, however L16Aisn't really fed to - * the TMA340, which relies entirely on L2B (PM8901 L2). - */ - vcpin-supply = <&pm8058_l16>; - vdd-supply = <&pm8901_l2>; - /* GPIO58, called WAKE_CTP */ - reset-gpios = <&tlmm 58 GPIO_ACTIVE_LOW>; - touchscreen-size-x = <480>; - touchscreen-size-y = <800>; - active-interval-ms = <0>; - touch-timeout-ms = <255>; - lowpower-interval-ms = <10>; - bootloader-key = /bits/ 8 <0x00 0x01 0x02 0x03 0x04 0x05 0x06 0x07>; - pinctrl-names = "default"; - pinctrl-0 = <&dragon_tma340_gpios>; - }; - }; +&pm8058_led48 { + /* + * The keypad LED @0x48 is routed to + * the sensor board where it is + * connected to an infrared LED + * SFH4650 (60mW, @850nm) next to the + * ambient light and proximity sensor + * Capella Microsystems CM3605. + */ + label = "pm8058:infrared:proximitysensor"; + default-state = "off"; + linux,default-trigger = "cm3605"; + status = "okay"; +}; + +&pm8058_led131 { + label = "pm8058:red"; + color = <LED_COLOR_ID_RED>; + default-state = "off"; + status = "okay"; +}; + +&pm8058_led132 { + /* + * This is actually green too on my + * board, but documented as yellow. + */ + label = "pm8058:yellow"; + color = <LED_COLOR_ID_YELLOW>; + default-state = "off"; + linux,default-trigger = "mmc0"; + status = "okay"; +}; + +&pm8058_led133 { + label = "pm8058:green"; + function = LED_FUNCTION_HEARTBEAT; + color = <LED_COLOR_ID_GREEN>; + default-state = "on"; + linux,default-trigger = "heartbeat"; + status = "okay"; +}; + +&pm8058_mpps { + dragon_cm3605_mpps: cm3605-mpps-state { + mpp5 { + pins = "mpp5"; + function = "analog"; + input-enable; + bias-high-impedance; + /* Let's use channel 5 */ + qcom,amux-route = <PMIC_MPP_AMUX_ROUTE_CH5>; + power-source = <PM8058_GPIO_S3>; }; + }; +}; - gsbi@19800000 { - status = "okay"; - qcom,mode = <GSBI_PROT_I2C>; +&rpm { + /* + * Set up of the PMIC RPM regulators for this board + * PM8901 supplies "preliminary regulators" whatever + * that means + */ + pm8901-regulators { + vdd_l0-supply = <&pm8901_s4>; + vdd_l1-supply = <&vph>; + vdd_l2-supply = <&vph>; + vdd_l3-supply = <&vph>; + vdd_l4-supply = <&vph>; + vdd_l5-supply = <&vph>; + vdd_l6-supply = <&vph>; + /* vdd_s0-supply, vdd_s1-supply: SAW regulators */ + vdd_s2-supply = <&vph>; + vdd_s3-supply = <&vph>; + vdd_s4-supply = <&vph>; + lvs0_in-supply = <&pm8058_s3>; + lvs1_in-supply = <&pm8901_s4>; + lvs2_in-supply = <&pm8058_l0>; + lvs3_in-supply = <&pm8058_s2>; + mvs_in-supply = <&pm8058_s3>; + + l0 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + bias-pull-down; + }; + l1 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + bias-pull-down; + }; + l2 { + /* TMA340 requires strictly 3.3V */ + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + bias-pull-down; + }; + l3 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + bias-pull-down; + }; + l4 { + regulator-min-microvolt = <2600000>; + regulator-max-microvolt = <2600000>; + bias-pull-down; + }; + l5 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + bias-pull-down; + }; + l6 { + regulator-min-microvolt = <2200000>; + regulator-max-microvolt = <2200000>; + bias-pull-down; + }; - i2c@19880000 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&dragon_gsbi8_i2c_pins>; - - eeprom@52 { - /* A 16KiB Platform ID EEPROM on the CPU carrier board */ - compatible = "atmel,24c128"; - reg = <0x52>; - vcc-supply = <&pm8058_s3>; - pagesize = <64>; - }; - wm8903: wm8903@1a { - /* This Woolfson Micro device has an unrouted interrupt line */ - compatible = "wlf,wm8903"; - reg = <0x1a>; - - AVDD-supply = <&pm8058_l16>; - CPVDD-supply = <&pm8058_l16>; - DBVDD-supply = <&pm8058_s3>; - DCVDD-supply = <&pm8058_l0>; - - gpio-controller; - #gpio-cells = <2>; - - micdet-cfg = <0>; - micdet-delay = <100>; - gpio-cfg = <0xffffffff 0xffffffff 0 0xffffffff 0xffffffff>; - }; - }; + /* s0 and s1 are SAW regulators controlled over SPM */ + s2 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + qcom,switch-mode-frequency = <1600000>; + bias-pull-down; + }; + s3 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + qcom,switch-mode-frequency = <1600000>; + bias-pull-down; + }; + s4 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + qcom,switch-mode-frequency = <1600000>; + bias-pull-down; }; - gsbi@19c00000 { - status = "okay"; - qcom,mode = <GSBI_PROT_I2C_UART>; + /* LVS0 thru 3 and mvs are just switches */ + lvs0 { + regulator-always-on; + }; + lvs1 { }; + lvs2 { }; + lvs3 { }; + mvs { }; - serial@19c40000 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&dragon_gsbi12_serial_pins>; - }; + }; - i2c@19c80000 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&dragon_gsbi12_i2c_pins>; - - ak8975@c { - compatible = "asahi-kasei,ak8975"; - reg = <0x0c>; - interrupt-parent = <&pm8058_gpio>; - interrupts = <33 IRQ_TYPE_EDGE_RISING>; - pinctrl-names = "default"; - pinctrl-0 = <&dragon_ak8975_gpios>; - vid-supply = <&pm8058_lvs0>; // 1.8V - vdd-supply = <&pm8058_l14>; // 2.85V - }; - bmp085@77 { - compatible = "bosch,bmp085"; - reg = <0x77>; - interrupt-parent = <&pm8058_gpio>; - interrupts = <16 IRQ_TYPE_EDGE_RISING>; - reset-gpios = <&tlmm 86 GPIO_ACTIVE_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&dragon_bmp085_gpios>; - vddd-supply = <&pm8058_lvs0>; // 1.8V - vdda-supply = <&pm8058_l14>; // 2.85V - }; - mpu3050@68 { - compatible = "invensense,mpu3050"; - reg = <0x68>; - /* - * GPIO17 is pulled high by a 10k - * resistor to VLOGIC so needs to be - * active low/falling edge. - */ - interrupts-extended = <&pm8058_gpio 17 IRQ_TYPE_EDGE_FALLING>; - pinctrl-names = "default"; - pinctrl-0 = <&dragon_mpu3050_gpios>; - vlogic-supply = <&pm8058_lvs0>; // 1.8V - vdd-supply = <&pm8058_l14>; // 2.85V - - /* - * The MPU-3050 acts as a hub for the - * accelerometer. - */ - i2c-gate { - #address-cells = <1>; - #size-cells = <0>; - - kxsd9@18 { - compatible = "kionix,kxsd9"; - reg = <0x18>; - interrupt-parent = <&tlmm>; - interrupts = <57 IRQ_TYPE_EDGE_FALLING>; - pinctrl-names = "default"; - pinctrl-0 = <&dragon_kxsd9_gpios>; - iovdd-supply = <&pm8058_lvs0>; // 1.8V - vdd-supply = <&pm8058_l14>; // 2.85V - }; - }; - }; - }; + pm8058-regulators { + vdd_l0_l1_lvs-supply = <&pm8058_s3>; + vdd_l2_l11_l12-supply = <&vph>; + vdd_l3_l4_l5-supply = <&vph>; + vdd_l6_l7-supply = <&vph>; + vdd_l8-supply = <&vph>; + vdd_l9-supply = <&vph>; + vdd_l10-supply = <&vph>; + vdd_l13_l16-supply = <&pm8058_s4>; + vdd_l14_l15-supply = <&vph>; + vdd_l17_l18-supply = <&vph>; + vdd_l19_l20-supply = <&vph>; + vdd_l21-supply = <&pm8058_s3>; + vdd_l22-supply = <&pm8058_s3>; + vdd_l23_l24_l25-supply = <&pm8058_s3>; + vdd_s0-supply = <&vph>; + vdd_s1-supply = <&vph>; + vdd_s2-supply = <&vph>; + vdd_s3-supply = <&vph>; + vdd_s4-supply = <&vph>; + vdd_ncp-supply = <&vph>; + + l0 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + bias-pull-down; + }; + l1 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + bias-pull-down; + }; + l2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2600000>; + bias-pull-down; + }; + l3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + bias-pull-down; + }; + l4 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + bias-pull-down; + }; + l5 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + bias-pull-down; + }; + l6 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3600000>; + bias-pull-down; + }; + l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + bias-pull-down; + }; + l8 { + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <3050000>; + bias-pull-down; + }; + l9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + bias-pull-down; + }; + l10 { + regulator-min-microvolt = <2600000>; + regulator-max-microvolt = <2600000>; + bias-pull-down; + }; + l11 { + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + bias-pull-down; + }; + l12 { + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + bias-pull-down; + }; + l13 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + bias-pull-down; + }; + l14 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + l15 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + bias-pull-down; + }; + l16 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + bias-pull-down; + regulator-always-on; + }; + l17 { + // 1.5V according to schematic + regulator-min-microvolt = <2600000>; + regulator-max-microvolt = <2600000>; + bias-pull-down; + }; + l18 { + regulator-min-microvolt = <2200000>; + regulator-max-microvolt = <2200000>; + bias-pull-down; + }; + l19 { + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + bias-pull-down; + }; + l20 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + bias-pull-down; + }; + l21 { + // 1.1 V according to schematic + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + bias-pull-down; + regulator-always-on; + }; + l22 { + // 1.2 V according to schematic + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + bias-pull-down; + }; + l23 { + // Unused + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + bias-pull-down; + }; + l24 { + // Unused + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + bias-pull-down; + }; + l25 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + bias-pull-down; }; - external-bus@1a100000 { - /* The EBI2 will instantiate first, then populate its children */ - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&dragon_ebi2_pins>; - - /* - * An on-board SMSC LAN9221 chip for "debug ethernet", - * which is actually just an ordinary ethernet on the - * EBI2. This has a 25MHz chrystal next to it, so no - * clocking is needed. - */ - ethernet@2,0 { - compatible = "smsc,lan9221", "smsc,lan9115"; - reg = <2 0x0 0x100>; - /* - * The second interrupt is the PME interrupt - * for network wakeup, connected to the TLMM. - */ - interrupts-extended = <&pm8058_gpio 7 IRQ_TYPE_EDGE_FALLING>, - <&tlmm 29 IRQ_TYPE_EDGE_RISING>; - reset-gpios = <&tlmm 30 GPIO_ACTIVE_LOW>; - vdd33a-supply = <&dragon_veth>; - vddvario-supply = <&dragon_vario>; - pinctrl-names = "default"; - pinctrl-0 = <&dragon_ethernet_gpios>; - phy-mode = "mii"; - reg-io-width = <2>; - smsc,force-external-phy; - smsc,irq-push-pull; - - /* - * SLOW chipselect config - * Delay 9 cycles (140ns@64MHz) between SMSC - * LAN9221 Ethernet controller reads and writes - * on CS2. - */ - qcom,xmem-recovery-cycles = <0>; - qcom,xmem-write-hold-cycles = <3>; - qcom,xmem-write-delta-cycles = <31>; - qcom,xmem-read-delta-cycles = <28>; - qcom,xmem-write-wait-cycles = <9>; - qcom,xmem-read-wait-cycles = <9>; - }; + s0 { + // regulator-min-microvolt = <500000>; + // regulator-max-microvolt = <1325000>; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + qcom,switch-mode-frequency = <1600000>; + bias-pull-down; + }; + s1 { + // regulator-min-microvolt = <500000>; + // regulator-max-microvolt = <1250000>; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + qcom,switch-mode-frequency = <1600000>; + bias-pull-down; + }; + s2 { + // 1.3 V according to schematic + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1400000>; + qcom,switch-mode-frequency = <1600000>; + bias-pull-down; + }; + s3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + qcom,switch-mode-frequency = <1600000>; + regulator-always-on; + bias-pull-down; + }; + s4 { + regulator-min-microvolt = <2200000>; + regulator-max-microvolt = <2200000>; + qcom,switch-mode-frequency = <1600000>; + regulator-always-on; + bias-pull-down; }; - rpm@104000 { - /* - * Set up of the PMIC RPM regulators for this board - * PM8901 supplies "preliminary regulators" whatever - * that means - */ - pm8901-regulators { - vdd_l0-supply = <&pm8901_s4>; - vdd_l1-supply = <&vph>; - vdd_l2-supply = <&vph>; - vdd_l3-supply = <&vph>; - vdd_l4-supply = <&vph>; - vdd_l5-supply = <&vph>; - vdd_l6-supply = <&vph>; - /* vdd_s0-supply, vdd_s1-supply: SAW regulators */ - vdd_s2-supply = <&vph>; - vdd_s3-supply = <&vph>; - vdd_s4-supply = <&vph>; - lvs0_in-supply = <&pm8058_s3>; - lvs1_in-supply = <&pm8901_s4>; - lvs2_in-supply = <&pm8058_l0>; - lvs3_in-supply = <&pm8058_s2>; - mvs_in-supply = <&pm8058_s3>; - - l0 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - bias-pull-down; - }; - l1 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - bias-pull-down; - }; - l2 { - /* TMA340 requires strictly 3.3V */ - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - bias-pull-down; - }; - l3 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - bias-pull-down; - }; - l4 { - regulator-min-microvolt = <2600000>; - regulator-max-microvolt = <2600000>; - bias-pull-down; - }; - l5 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - bias-pull-down; - }; - l6 { - regulator-min-microvolt = <2200000>; - regulator-max-microvolt = <2200000>; - bias-pull-down; - }; - - /* s0 and s1 are SAW regulators controlled over SPM */ - s2 { - regulator-min-microvolt = <1300000>; - regulator-max-microvolt = <1300000>; - qcom,switch-mode-frequency = <1600000>; - bias-pull-down; - }; - s3 { - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; - qcom,switch-mode-frequency = <1600000>; - bias-pull-down; - }; - s4 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - qcom,switch-mode-frequency = <1600000>; - bias-pull-down; - }; - - /* LVS0 thru 3 and mvs are just switches */ - lvs0 { - regulator-always-on; - }; - lvs1 { }; - lvs2 { }; - lvs3 { }; - mvs { }; + /* LVS0 and LVS1 are just switches */ + lvs0 { + bias-pull-down; + }; + lvs1 { + bias-pull-down; + }; - }; + ncp { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + qcom,switch-mode-frequency = <1600000>; + }; + }; +}; - pm8058-regulators { - vdd_l0_l1_lvs-supply = <&pm8058_s3>; - vdd_l2_l11_l12-supply = <&vph>; - vdd_l3_l4_l5-supply = <&vph>; - vdd_l6_l7-supply = <&vph>; - vdd_l8-supply = <&vph>; - vdd_l9-supply = <&vph>; - vdd_l10-supply = <&vph>; - vdd_l13_l16-supply = <&pm8058_s4>; - vdd_l14_l15-supply = <&vph>; - vdd_l17_l18-supply = <&vph>; - vdd_l19_l20-supply = <&vph>; - vdd_l21-supply = <&pm8058_s3>; - vdd_l22-supply = <&pm8058_s3>; - vdd_l23_l24_l25-supply = <&pm8058_s3>; - vdd_s0-supply = <&vph>; - vdd_s1-supply = <&vph>; - vdd_s2-supply = <&vph>; - vdd_s3-supply = <&vph>; - vdd_s4-supply = <&vph>; - vdd_ncp-supply = <&vph>; - - l0 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - bias-pull-down; - }; - l1 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - bias-pull-down; - }; - l2 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2600000>; - bias-pull-down; - }; - l3 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - bias-pull-down; - }; - l4 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - bias-pull-down; - }; - l5 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - bias-pull-down; - }; - l6 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3600000>; - bias-pull-down; - }; - l7 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - bias-pull-down; - }; - l8 { - regulator-min-microvolt = <2900000>; - regulator-max-microvolt = <3050000>; - bias-pull-down; - }; - l9 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - bias-pull-down; - }; - l10 { - regulator-min-microvolt = <2600000>; - regulator-max-microvolt = <2600000>; - bias-pull-down; - }; - l11 { - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; - bias-pull-down; - }; - l12 { - regulator-min-microvolt = <2900000>; - regulator-max-microvolt = <2900000>; - bias-pull-down; - }; - l13 { - regulator-min-microvolt = <2050000>; - regulator-max-microvolt = <2050000>; - bias-pull-down; - }; - l14 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - }; - l15 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - bias-pull-down; - }; - l16 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - bias-pull-down; - regulator-always-on; - }; - l17 { - // 1.5V according to schematic - regulator-min-microvolt = <2600000>; - regulator-max-microvolt = <2600000>; - bias-pull-down; - }; - l18 { - regulator-min-microvolt = <2200000>; - regulator-max-microvolt = <2200000>; - bias-pull-down; - }; - l19 { - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <2500000>; - bias-pull-down; - }; - l20 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - bias-pull-down; - }; - l21 { - // 1.1 V according to schematic - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - bias-pull-down; - regulator-always-on; - }; - l22 { - // 1.2 V according to schematic - regulator-min-microvolt = <1150000>; - regulator-max-microvolt = <1150000>; - bias-pull-down; - }; - l23 { - // Unused - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - bias-pull-down; - }; - l24 { - // Unused - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - bias-pull-down; - }; - l25 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - bias-pull-down; - }; - - s0 { - // regulator-min-microvolt = <500000>; - // regulator-max-microvolt = <1325000>; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; - qcom,switch-mode-frequency = <1600000>; - bias-pull-down; - }; - s1 { - // regulator-min-microvolt = <500000>; - // regulator-max-microvolt = <1250000>; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; - qcom,switch-mode-frequency = <1600000>; - bias-pull-down; - }; - s2 { - // 1.3 V according to schematic - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1400000>; - qcom,switch-mode-frequency = <1600000>; - bias-pull-down; - }; - s3 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - qcom,switch-mode-frequency = <1600000>; - regulator-always-on; - bias-pull-down; - }; - s4 { - regulator-min-microvolt = <2200000>; - regulator-max-microvolt = <2200000>; - qcom,switch-mode-frequency = <1600000>; - regulator-always-on; - bias-pull-down; - }; - - /* LVS0 and LVS1 are just switches */ - lvs0 { - bias-pull-down; - }; - lvs1 { - bias-pull-down; - }; - - ncp { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - qcom,switch-mode-frequency = <1600000>; - }; - }; +/* Internal 3.69 GiB eMMC */ +&sdcc1 { + pinctrl-names = "default"; + pinctrl-0 = <&dragon_sdcc1_pins>; + vmmc-supply = <&pm8901_l5>; + vqmmc-supply = <&pm8901_lvs0>; + status = "okay"; +}; + +/* External micro SD card, directly connected, pulled up to 2.85 V */ +&sdcc3 { + /* Enable SSBI GPIO 22 as input, use for card detect */ + pinctrl-names = "default"; + pinctrl-0 = <&dragon_sdcc3_pins>, <&dragon_sdcc3_gpios>; + cd-gpios = <&pm8058_gpio 22 GPIO_ACTIVE_LOW>; + wp-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>; + vmmc-supply = <&pm8058_l14>; + status = "okay"; +}; + +/* + * Second external micro SD card, using two TXB104RGYR levelshifters + * to lift from 1.8 V to 2.85 V + */ +&sdcc5 { + /* Enable SSBI GPIO 26 as input, use for card detect */ + pinctrl-names = "default"; + pinctrl-0 = <&dragon_sdcc5_pins>, <&dragon_sdcc5_gpios>; + cd-gpios = <&pm8058_gpio 26 GPIO_ACTIVE_LOW>; + wp-gpios = <&tlmm 106 GPIO_ACTIVE_HIGH>; + vmmc-supply = <&pm8058_l14>; + vqmmc-supply = <&dragon_vio_txb>; + status = "okay"; +}; + +&tlmm { + /* eMMC pins, all 8 data lines connected */ + dragon_sdcc1_pins: sdcc1-state { + clk-pins { + pins = "gpio167"; /* SDC1 CLK */ + function = "sdc1"; + drive-strength = <16>; + bias-disable; }; - amba { - /* Internal 3.69 GiB eMMC */ - mmc@12400000 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&dragon_sdcc1_pins>; - vmmc-supply = <&pm8901_l5>; - vqmmc-supply = <&pm8901_lvs0>; - }; + cmd-pins { + pins = "gpio168"; /* SDC1 CMD */ + function = "sdc1"; + drive-strength = <10>; + bias-pull-up; + }; + data-pins { + /* SDC1 D0 to D7 */ + pins = "gpio159", "gpio160", "gpio161", "gpio162", + "gpio163", "gpio164", "gpio165", "gpio166"; + function = "sdc1"; + drive-strength = <10>; + bias-pull-up; + }; + }; - /* External micro SD card, directly connected, pulled up to 2.85 V */ - mmc@12180000 { - status = "okay"; - /* Enable SSBI GPIO 22 as input, use for card detect */ - pinctrl-names = "default"; - pinctrl-0 = <&dragon_sdcc3_pins>, <&dragon_sdcc3_gpios>; - cd-gpios = <&pm8058_gpio 22 GPIO_ACTIVE_LOW>; - wp-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>; - vmmc-supply = <&pm8058_l14>; - }; + /* + * The SDCC3 pins are hardcoded (non-muxable) but need some pin + * configuration. + */ + dragon_sdcc3_pins: sdcc3-state { + clk-pins { + pins = "sdc3_clk"; + drive-strength = <8>; + bias-disable; + }; + cmd-pins { + pins = "sdc3_cmd"; + drive-strength = <8>; + bias-pull-up; + }; + data-pins { + pins = "sdc3_data"; + drive-strength = <8>; + bias-pull-up; + }; + }; - /* - * Second external micro SD card, using two TXB104RGYR levelshifters - * to lift from 1.8 V to 2.85 V - */ - mmc@12200000 { - status = "okay"; - /* Enable SSBI GPIO 26 as input, use for card detect */ - pinctrl-names = "default"; - pinctrl-0 = <&dragon_sdcc5_pins>, <&dragon_sdcc5_gpios>; - cd-gpios = <&pm8058_gpio 26 GPIO_ACTIVE_LOW>; - wp-gpios = <&tlmm 106 GPIO_ACTIVE_HIGH>; - vmmc-supply = <&pm8058_l14>; - vqmmc-supply = <&dragon_vio_txb>; - }; + /* Second SD card slot pins */ + dragon_sdcc5_pins: sdcc5-state { + clk-pins { + pins = "gpio97"; /* SDC5 CLK */ + function = "sdc5"; + drive-strength = <16>; + bias-disable; + }; + cmd-pins { + pins = "gpio95"; /* SDC5 CMD */ + function = "sdc5"; + drive-strength = <10>; + bias-pull-up; + }; + data-pins { + /* SDC5 D0 to D3 */ + pins = "gpio96", "gpio98", "gpio99", "gpio100"; + function = "sdc5"; + drive-strength = <10>; + bias-pull-up; }; }; + + dragon_gsbi3_i2c_pins: gsbi3-i2c-state { + pins = "gpio43", "gpio44"; + function = "gsbi3"; + drive-strength = <8>; + /* These have external pull-up 2.2kOhm to 1.8V */ + bias-disable; + }; + + dragon_gsbi8_i2c_pins: gsbi8-i2c-state { + pins = "gpio64", "gpio65"; + function = "gsbi8"; + drive-strength = <16>; + /* These have external pull-up 2.2kOhm to 1.8V */ + bias-disable; + }; + + dragon_gsbi12_i2c_pins: gsbi12-i2c-state { + pins = "gpio115", "gpio116"; + function = "gsbi12"; + drive-strength = <16>; + /* These have external pull-up 4.7kOhm to 1.8V */ + bias-disable; + }; + + /* Primary serial port uart 0 pins */ + dragon_gsbi12_serial_pins: gsbi12-serial-state { + tx-pins { + pins = "gpio117"; + function = "gsbi12"; + drive-strength = <8>; + bias-disable; + }; + rx-pins { + pins = "gpio118"; + function = "gsbi12"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + dragon_ebi2_pins: ebi2-state { + /* + * Pins used by EBI2 on the Dragonboard, actually only + * CS2 is used by a real peripheral. CS0 is just + * routed to a test point. + */ + mux0-pins { + pins = + /* "gpio39", CS1A_N this is not good to mux */ + "gpio40", /* CS2A_N */ + "gpio134"; /* CS0_N testpoint TP29 */ + function = "ebi2cs"; + }; + mux1-pins { + pins = + /* EBI2_ADDR_7 downto EBI2_ADDR_0 address bus */ + "gpio123", "gpio124", "gpio125", "gpio126", + "gpio127", "gpio128", "gpio129", "gpio130", + /* EBI2_DATA_15 downto EBI2_DATA_0 data bus */ + "gpio135", "gpio136", "gpio137", "gpio138", + "gpio139", "gpio140", "gpio141", "gpio142", + "gpio143", "gpio144", "gpio145", "gpio146", + "gpio147", "gpio148", "gpio149", "gpio150", + "gpio151", /* EBI2_OE_N */ + "gpio153", /* EBI2_ADV */ + "gpio157"; /* EBI2_WE_N */ + function = "ebi2"; + }; + }; + + /* Interrupt line for the KXSD9 accelerometer */ + dragon_kxsd9_gpios: kxsd9-state { + pins = "gpio57"; /* IRQ line */ + function = "gpio"; + bias-pull-up; + }; + + dragon_tma340_gpios: tma340-state { + reset-pins { + /* RESET line, TS_ATTN, WAKE_CTP */ + pins = "gpio58"; + function = "gpio"; + drive-strength = <6>; + bias-disable; + }; + irq-pins { + pins = "gpio61"; /* IRQ line */ + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; +}; + +&xoadc { + /* Reference voltage 2.2 V */ + xoadc-ref-supply = <&pm8058_l18>; + + /* Board-specific channels */ + mpp5@5 { + /* Connected to AOUT of ALS sensor */ + reg = <0x00 0x05>; + }; + mpp6@6 { + /* Connected to test point TP43 */ + reg = <0x00 0x06>; + }; + mpp7@7 { + /* Connected to battery thermistor */ + reg = <0x00 0x07>; + }; + mpp8@8 { + /* Connected to battery ID detector */ + reg = <0x00 0x08>; + }; + mpp9@9 { + /* Connected to XO thermistor */ + reg = <0x00 0x09>; + }; }; diff --git a/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts b/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts index fee278e32cb6..bf2fb0f70fe4 100644 --- a/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts +++ b/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts @@ -6,6 +6,7 @@ / { model = "Asus Nexus7(flo)"; compatible = "asus,nexus7-flo", "qcom,apq8064"; + chassis-type = "tablet"; aliases { serial0 = &gsbi7_serial; @@ -30,7 +31,7 @@ }; }; - ext_3p3v: regulator-fixed@1 { + ext_3p3v: regulator-ext-3p3v { compatible = "regulator-fixed"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; @@ -57,302 +58,291 @@ }; soc { - rpm@108000 { - regulators { - vdd_l1_l2_l12_l18-supply = <&pm8921_s4>; - vin_lvs1_3_6-supply = <&pm8921_s4>; - vin_lvs4_5_7-supply = <&pm8921_s4>; - - - vdd_l24-supply = <&pm8921_s1>; - vdd_l25-supply = <&pm8921_s1>; - vin_lvs2-supply = <&pm8921_s1>; - - vdd_l26-supply = <&pm8921_s7>; - vdd_l27-supply = <&pm8921_s7>; - vdd_l28-supply = <&pm8921_s7>; - - vdd_ncp-supply = <&pm8921_l6>; - - /* Buck SMPS */ - s1 { - regulator-always-on; - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - qcom,switch-mode-frequency = <3200000>; - bias-pull-down; - }; - - /* msm otg HSUSB_VDDCX */ - s3 { - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1150000>; - qcom,switch-mode-frequency = <4800000>; - }; - - /* - * msm_sdcc.1-sdc-vdd_io - * tabla2x-slim-CDC_VDDA_RX - * tabla2x-slim-CDC_VDDA_TX - * tabla2x-slim-CDC_VDD_CP - * tabla2x-slim-VDDIO_CDC - */ - s4 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - qcom,switch-mode-frequency = <3200000>; - regulator-always-on; - }; - - s7 { - regulator-min-microvolt = <1300000>; - regulator-max-microvolt = <1300000>; - qcom,switch-mode-frequency = <3200000>; - }; - - /* mipi_dsi.1-dsi1_pll_vdda */ - l2 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - }; - - /* msm_otg-HSUSB_3p3 */ - l3 { - regulator-min-microvolt = <3075000>; - regulator-max-microvolt = <3075000>; - bias-pull-down; - }; - - /* msm_otg-HSUSB_1p8 */ - l4 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - bias-pull-down; - }; - - /* msm_sdcc.1-sdc_vdd */ - l5 { - regulator-min-microvolt = <2950000>; - regulator-max-microvolt = <2950000>; - regulator-always-on; - bias-pull-down; - }; - - l6 { - regulator-min-microvolt = <2950000>; - regulator-max-microvolt = <2950000>; - }; - - /* mipi_dsi.1-dsi1_avdd */ - l11 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - bias-pull-down; - regulator-always-on; - }; - - /* pwm_power for backlight */ - l17 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-always-on; - }; - - /* camera, qdsp6 */ - l23 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - bias-pull-down; - }; - - /* - * tabla2x-slim-CDC_VDDA_A_1P2V - * tabla2x-slim-VDDD_CDC_D - */ - l25 { - regulator-min-microvolt = <1250000>; - regulator-max-microvolt = <1250000>; - bias-pull-down; - }; - - lvs1 { - bias-pull-down; - }; - - lvs4 { - bias-pull-down; - }; - - lvs5 { - bias-pull-down; - }; - - lvs6 { - bias-pull-down; - }; - /* - * mipi_dsi.1-dsi1_vddio - * pil_riva-pll_vdd - */ - lvs7 { - bias-pull-down; - }; - }; - }; + sram@2a03f000 { + compatible = "qcom,apq8064-imem", "syscon", "simple-mfd"; + reg = <0x2a03f000 0x1000>; + + reboot-mode { + compatible = "syscon-reboot-mode"; + offset = <0x65c>; - mdp@5100000 { - status = "okay"; - ports { - port@1 { - mdp_dsi1_out: endpoint { - remote-endpoint = <&dsi0_in>; - }; - }; + mode-normal = <0x77665501>; + mode-bootloader = <0x77665500>; + mode-recovery = <0x77665502>; }; }; + }; +}; - dsi0: dsi@4700000 { - status = "okay"; - vdda-supply = <&pm8921_l2>;/*VDD_MIPI1 to 4*/ - vdd-supply = <&pm8921_l8>; - vddio-supply = <&pm8921_lvs7>; - avdd-supply = <&pm8921_l11>; - - panel@0 { - reg = <0>; - compatible = "jdi,lt070me05000"; - - vddp-supply = <&pm8921_l17>; - iovcc-supply = <&pm8921_lvs7>; - - enable-gpios = <&pm8921_gpio 36 GPIO_ACTIVE_HIGH>; - reset-gpios = <&tlmm_pinmux 54 GPIO_ACTIVE_LOW>; - dcdc-en-gpios = <&pm8921_gpio 23 GPIO_ACTIVE_HIGH>; - - port { - panel_in: endpoint { - remote-endpoint = <&dsi0_out>; - }; - }; - }; - ports { - port@0 { - dsi0_in: endpoint { - remote-endpoint = <&mdp_dsi1_out>; - }; - }; - - port@1 { - dsi0_out: endpoint { - remote-endpoint = <&panel_in>; - data-lanes = <0 1 2 3>; - }; - }; +&dsi0 { + vdda-supply = <&pm8921_l2>;/*VDD_MIPI1 to 4*/ + vdd-supply = <&pm8921_l8>; + vddio-supply = <&pm8921_lvs7>; + avdd-supply = <&pm8921_l11>; + status = "okay"; + + panel@0 { + reg = <0>; + compatible = "jdi,lt070me05000"; + + vddp-supply = <&pm8921_l17>; + iovcc-supply = <&pm8921_lvs7>; + + enable-gpios = <&pm8921_gpio 36 GPIO_ACTIVE_HIGH>; + reset-gpios = <&tlmm_pinmux 54 GPIO_ACTIVE_LOW>; + dcdc-en-gpios = <&pm8921_gpio 23 GPIO_ACTIVE_HIGH>; + + port { + panel_in: endpoint { + remote-endpoint = <&dsi0_out>; }; }; + }; +}; + +&dsi0_in { + remote-endpoint = <&mdp_dsi1_out>; +}; + +&dsi0_out { + remote-endpoint = <&panel_in>; + data-lanes = <0 1 2 3>; +}; + +&dsi0_phy { + vddio-supply = <&pm8921_lvs7>;/*VDD_PLL2_1 to 7*/ + status = "okay"; +}; + +&gsbi1 { + qcom,mode = <GSBI_PROT_I2C>; + status = "okay"; +}; + +&gsbi1_i2c { + status = "okay"; + clock-frequency = <200000>; + pinctrl-0 = <&i2c1_pins>; + pinctrl-names = "default"; + + eeprom@52 { + compatible = "atmel,24c128"; + reg = <0x52>; + pagesize = <32>; + }; + + bq27541@55 { + compatible = "ti,bq27541"; + reg = <0x55>; + }; + +}; + +&gsbi3 { + qcom,mode = <GSBI_PROT_I2C>; + status = "okay"; +}; + +&gsbi3_i2c { + clock-frequency = <200000>; + pinctrl-0 = <&i2c3_pins>; + pinctrl-names = "default"; + status = "okay"; + + trackpad@10 { + compatible = "elan,ekth3500"; + reg = <0x10>; + interrupt-parent = <&tlmm_pinmux>; + interrupts = <6 IRQ_TYPE_EDGE_FALLING>; + }; +}; + +&gsbi6 { + qcom,mode = <GSBI_PROT_I2C_UART>; + status = "okay"; +}; + +&gsbi6_serial { + pinctrl-names = "default"; + pinctrl-0 = <&gsbi6_uart_4pins>; + status = "okay"; +}; - dsi-phy@4700200 { - status = "okay"; - vddio-supply = <&pm8921_lvs7>;/*VDD_PLL2_1 to 7*/ +&gsbi7 { + qcom,mode = <GSBI_PROT_I2C_UART>; + status = "okay"; +}; + +&gsbi7_serial { + status = "okay"; +}; + +&mdp { + status = "okay"; +}; + +/* eMMC */ +&sdcc1 { + vmmc-supply = <&pm8921_l5>; + vqmmc-supply = <&pm8921_s4>; + status = "okay"; +}; + +&mdp_dsi1_out { + remote-endpoint = <&dsi0_in>; +}; + +&rpm { + regulators { + vdd_l1_l2_l12_l18-supply = <&pm8921_s4>; + vin_lvs1_3_6-supply = <&pm8921_s4>; + vin_lvs4_5_7-supply = <&pm8921_s4>; + + + vdd_l24-supply = <&pm8921_s1>; + vdd_l25-supply = <&pm8921_s1>; + vin_lvs2-supply = <&pm8921_s1>; + + vdd_l26-supply = <&pm8921_s7>; + vdd_l27-supply = <&pm8921_s7>; + vdd_l28-supply = <&pm8921_s7>; + + vdd_ncp-supply = <&pm8921_l6>; + + /* Buck SMPS */ + s1 { + regulator-always-on; + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + qcom,switch-mode-frequency = <3200000>; + bias-pull-down; }; - gsbi@16200000 { - status = "okay"; - qcom,mode = <GSBI_PROT_I2C>; - i2c@16280000 { - status = "okay"; - clock-frequency = <200000>; - pinctrl-0 = <&i2c3_pins>; - pinctrl-names = "default"; - - trackpad@10 { - compatible = "elan,ekth3500"; - reg = <0x10>; - interrupt-parent = <&tlmm_pinmux>; - interrupts = <6 IRQ_TYPE_EDGE_FALLING>; - }; - }; + /* msm otg HSUSB_VDDCX */ + s3 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1150000>; + qcom,switch-mode-frequency = <4800000>; }; + /* + * msm_sdcc.1-sdc-vdd_io + * tabla2x-slim-CDC_VDDA_RX + * tabla2x-slim-CDC_VDDA_TX + * tabla2x-slim-CDC_VDD_CP + * tabla2x-slim-VDDIO_CDC + */ + s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + qcom,switch-mode-frequency = <3200000>; + regulator-always-on; + }; - gsbi@12440000 { - status = "okay"; - qcom,mode = <GSBI_PROT_I2C>; + s7 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + qcom,switch-mode-frequency = <3200000>; + }; - i2c@12460000 { - status = "okay"; - clock-frequency = <200000>; - pinctrl-0 = <&i2c1_pins>; - pinctrl-names = "default"; + /* mipi_dsi.1-dsi1_pll_vdda */ + l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; - eeprom@52 { - compatible = "atmel,24c128"; - reg = <0x52>; - pagesize = <32>; - }; + /* msm_otg-HSUSB_3p3 */ + l3 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + bias-pull-down; + }; - bq27541@55 { - compatible = "ti,bq27541"; - reg = <0x55>; - }; + /* msm_otg-HSUSB_1p8 */ + l4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + bias-pull-down; + }; - }; + /* msm_sdcc.1-sdc_vdd */ + l5 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-always-on; + bias-pull-down; }; - gsbi@16500000 { - status = "okay"; - qcom,mode = <GSBI_PROT_I2C_UART>; + l6 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + }; - serial@16540000 { - status = "okay"; + /* mipi_dsi.1-dsi1_avdd */ + l11 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + bias-pull-down; + regulator-always-on; + }; - pinctrl-names = "default"; - pinctrl-0 = <&gsbi6_uart_4pins>; - }; + /* pwm_power for backlight */ + l17 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; }; - gsbi@16600000 { - status = "okay"; - qcom,mode = <GSBI_PROT_I2C_UART>; - serial@16640000 { - status = "okay"; - }; + /* camera, qdsp6 */ + l23 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + bias-pull-down; }; - /* OTG */ - usb@12500000 { - status = "okay"; - dr_mode = "otg"; - ulpi { - phy { - v3p3-supply = <&pm8921_l3>; - v1p8-supply = <&pm8921_l4>; - }; - }; + /* + * tabla2x-slim-CDC_VDDA_A_1P2V + * tabla2x-slim-VDDD_CDC_D + */ + l25 { + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1250000>; + bias-pull-down; }; - amba { - /* eMMC */ - mmc@12400000 { - status = "okay"; - vmmc-supply = <&pm8921_l5>; - vqmmc-supply = <&pm8921_s4>; - }; + lvs1 { + bias-pull-down; }; - sram@2a03f000 { - compatible = "qcom,apq8064-imem", "syscon", "simple-mfd"; - reg = <0x2a03f000 0x1000>; + lvs4 { + bias-pull-down; + }; - reboot-mode { - compatible = "syscon-reboot-mode"; - offset = <0x65c>; + lvs5 { + bias-pull-down; + }; - mode-normal = <0x77665501>; - mode-bootloader = <0x77665500>; - mode-recovery = <0x77665502>; - }; + lvs6 { + bias-pull-down; + }; + /* + * mipi_dsi.1-dsi1_vddio + * pil_riva-pll_vdd + */ + lvs7 { + bias-pull-down; }; }; }; + +&usb_hs1_phy { + v3p3-supply = <&pm8921_l3>; + v1p8-supply = <&pm8921_l4>; +}; + +/* OTG */ +&usb1 { + dr_mode = "otg"; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts index 529629a0a9dc..d6ecfd8addb7 100644 --- a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts +++ b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts @@ -15,232 +15,216 @@ stdout-path = "serial0:115200n8"; }; - pwrseq { - #address-cells = <1>; - #size-cells = <1>; - ranges; - compatible = "simple-bus"; - - sdcc4_pwrseq: sdcc4_pwrseq { - pinctrl-names = "default"; - pinctrl-0 = <&wlan_default_gpios>; - compatible = "mmc-pwrseq-simple"; - reset-gpios = <&pm8921_gpio 43 GPIO_ACTIVE_LOW>; - }; + sdcc4_pwrseq: pwrseq-sdcc4 { + pinctrl-names = "default"; + pinctrl-0 = <&wlan_default_gpios>; + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&pm8921_gpio 43 GPIO_ACTIVE_LOW>; }; - soc { - pinctrl@800000 { - card_detect: card_detect { - mux { - pins = "gpio26"; - function = "gpio"; - bias-disable; - }; - }; - - pcie_pins: pcie_pinmux { - mux { - pins = "gpio27"; - function = "gpio"; - }; - conf { - pins = "gpio27"; - drive-strength = <12>; - bias-disable; - }; - }; - }; + /* on board fixed 3.3v supply */ + v3p3_fixed: regulator-v3p3 { + compatible = "regulator-fixed"; + regulator-name = "PCIE V3P3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; +}; - rpm@108000 { - regulators { - vin_lvs1_3_6-supply = <&pm8921_s4>; - vin_lvs2-supply = <&pm8921_s1>; - vin_lvs4_5_7-supply = <&pm8921_s4>; - - vdd_l1_l2_l12_l18-supply = <&pm8921_s4>; - vdd_l24-supply = <&pm8921_s1>; - vdd_l25-supply = <&pm8921_s1>; - vdd_l26-supply = <&pm8921_s7>; - vdd_l27-supply = <&pm8921_s7>; - vdd_l28-supply = <&pm8921_s7>; - - - /* Buck SMPS */ - s1 { - regulator-always-on; - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - qcom,switch-mode-frequency = <3200000>; - bias-pull-down; - }; - - s3 { - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1400000>; - qcom,switch-mode-frequency = <4800000>; - }; - - s4 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - qcom,switch-mode-frequency = <3200000>; - }; - - s7 { - regulator-min-microvolt = <1300000>; - regulator-max-microvolt = <1300000>; - qcom,switch-mode-frequency = <3200000>; - }; - - l3 { - regulator-min-microvolt = <3050000>; - regulator-max-microvolt = <3300000>; - bias-pull-down; - }; - - l4 { - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1800000>; - bias-pull-down; - }; - - l5 { - regulator-min-microvolt = <2750000>; - regulator-max-microvolt = <3000000>; - bias-pull-down; - }; - - l23 { - regulator-min-microvolt = <1700000>; - regulator-max-microvolt = <1900000>; - bias-pull-down; - }; - - pm8921_lvs6: lvs6 { - bias-pull-down; - }; - - }; - }; +&gsbi1 { + qcom,mode = <GSBI_PROT_I2C>; + status = "okay"; +}; - gsbi@12440000 { - status = "okay"; - qcom,mode = <GSBI_PROT_I2C>; +&gsbi1_i2c { + clock-frequency = <200000>; + status = "okay"; - i2c@12460000 { - status = "okay"; - clock-frequency = <200000>; + eeprom@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + pagesize = <32>; + }; +}; + +&gsbi7 { + qcom,mode = <GSBI_PROT_I2C_UART>; + status = "okay"; +}; - eeprom@50 { - compatible = "atmel,24c02"; - reg = <0x50>; - pagesize = <32>; - }; - }; +&gsbi7_serial { + pinctrl-names = "default"; + pinctrl-0 = <&gsbi7_uart_2pins>; + status = "okay"; +}; + +&pcie { + vdda-supply = <&pm8921_s3>; + vdda_phy-supply = <&pm8921_lvs6>; + vdda_refclk-supply = <&v3p3_fixed>; + pinctrl-0 = <&pcie_pins>; + pinctrl-names = "default"; + perst-gpios = <&tlmm_pinmux 27 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&pm8921_gpio { + wlan_default_gpios: wlan-gpios-state { + pinconf { + pins = "gpio43"; + function = "normal"; + bias-disable; + power-source = <PM8921_GPIO_S4>; }; + }; +}; + +&rpm { + regulators { + vin_lvs1_3_6-supply = <&pm8921_s4>; + vin_lvs2-supply = <&pm8921_s1>; + vin_lvs4_5_7-supply = <&pm8921_s4>; + + vdd_l1_l2_l12_l18-supply = <&pm8921_s4>; + vdd_l24-supply = <&pm8921_s1>; + vdd_l25-supply = <&pm8921_s1>; + vdd_l26-supply = <&pm8921_s7>; + vdd_l27-supply = <&pm8921_s7>; + vdd_l28-supply = <&pm8921_s7>; + - gsbi@16600000 { - status = "okay"; - qcom,mode = <GSBI_PROT_I2C_UART>; - serial@16640000 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&gsbi7_uart_2pins>; - }; + /* Buck SMPS */ + s1 { + regulator-always-on; + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + qcom,switch-mode-frequency = <3200000>; + bias-pull-down; }; - /* OTG */ - usb@12500000 { - status = "okay"; - dr_mode = "otg"; - ulpi { - phy { - v3p3-supply = <&pm8921_l3>; - v1p8-supply = <&pm8921_l4>; - }; - }; + s3 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + qcom,switch-mode-frequency = <4800000>; }; - usb@12520000 { - status = "okay"; - dr_mode = "host"; - ulpi { - phy { - v3p3-supply = <&pm8921_l3>; - v1p8-supply = <&pm8921_l23>; - }; - }; + s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + qcom,switch-mode-frequency = <3200000>; }; - usb@12530000 { - status = "okay"; - dr_mode = "host"; - ulpi { - phy { - v3p3-supply = <&pm8921_l3>; - v1p8-supply = <&pm8921_l23>; - }; - }; + s7 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + qcom,switch-mode-frequency = <3200000>; }; - /* on board fixed 3.3v supply */ - v3p3_fixed: v3p3 { - compatible = "regulator-fixed"; - regulator-name = "PCIE V3P3"; - regulator-min-microvolt = <3300000>; + l3 { + regulator-min-microvolt = <3050000>; regulator-max-microvolt = <3300000>; - regulator-always-on; + bias-pull-down; + }; + + l4 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1800000>; + bias-pull-down; + }; + + l5 { + regulator-min-microvolt = <2750000>; + regulator-max-microvolt = <3000000>; + bias-pull-down; }; - qcom,ssbi@500000 { - pmic@0 { - gpio@150 { - wlan_default_gpios: wlan-gpios-state { - pinconf { - pins = "gpio43"; - function = "normal"; - bias-disable; - power-source = <PM8921_GPIO_S4>; - }; - }; - }; - }; + l23 { + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <1900000>; + bias-pull-down; }; - pci@1b500000 { - status = "okay"; - vdda-supply = <&pm8921_s3>; - vdda_phy-supply = <&pm8921_lvs6>; - vdda_refclk-supply = <&v3p3_fixed>; - pinctrl-0 = <&pcie_pins>; - pinctrl-names = "default"; - perst-gpios = <&tlmm_pinmux 27 GPIO_ACTIVE_LOW>; + lvs6 { + bias-pull-down; }; - amba { - /* eMMC */ - sdcc1: mmc@12400000 { - status = "okay"; - vmmc-supply = <&pm8921_l5>; - vqmmc-supply = <&pm8921_s4>; - }; - - /* External micro SD card */ - sdcc3: mmc@12180000 { - status = "okay"; - vmmc-supply = <&v3p3_fixed>; - pinctrl-names = "default"; - pinctrl-0 = <&card_detect>; - cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>; - }; - /* WLAN */ - sdcc4: mmc@121c0000 { - status = "okay"; - vmmc-supply = <&v3p3_fixed>; - vqmmc-supply = <&v3p3_fixed>; - mmc-pwrseq = <&sdcc4_pwrseq>; - }; + }; +}; + +/* eMMC */ +&sdcc1 { + vmmc-supply = <&pm8921_l5>; + vqmmc-supply = <&pm8921_s4>; + status = "okay"; +}; + +/* External micro SD card */ +&sdcc3 { + vmmc-supply = <&v3p3_fixed>; + pinctrl-names = "default"; + pinctrl-0 = <&card_detect>; + cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +/* WLAN */ +&sdcc4 { + status = "okay"; + vmmc-supply = <&v3p3_fixed>; + vqmmc-supply = <&v3p3_fixed>; + mmc-pwrseq = <&sdcc4_pwrseq>; +}; + +&tlmm_pinmux { + card_detect: card_detect { + mux { + pins = "gpio26"; + function = "gpio"; + bias-disable; + }; + }; + + pcie_pins: pcie_pinmux { + mux { + pins = "gpio27"; + function = "gpio"; + }; + conf { + pins = "gpio27"; + drive-strength = <12>; + bias-disable; }; }; }; + +&usb_hs1_phy { + v3p3-supply = <&pm8921_l3>; + v1p8-supply = <&pm8921_l4>; +}; + +&usb_hs3_phy { + v3p3-supply = <&pm8921_l3>; + v1p8-supply = <&pm8921_l23>; +}; + +&usb_hs4_phy { + v3p3-supply = <&pm8921_l3>; + v1p8-supply = <&pm8921_l23>; +}; + +/* OTG */ +&usb1 { + dr_mode = "otg"; + status = "okay"; +}; + +&usb3 { + dr_mode = "host"; + status = "okay"; +}; + +&usb4 { + dr_mode = "host"; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts index a7f90217661b..96307550523a 100644 --- a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts +++ b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts @@ -22,23 +22,12 @@ stdout-path = "serial0:115200n8"; }; - pwrseq { - compatible = "simple-bus"; - - sdcc4_pwrseq: sdcc4_pwrseq { - pinctrl-names = "default"; - pinctrl-0 = <&wlan_default_gpios>; - compatible = "mmc-pwrseq-simple"; - reset-gpios = <&pm8921_gpio 43 GPIO_ACTIVE_LOW>; - }; - }; - leds { compatible = "gpio-leds"; pinctrl-names = "default"; pinctrl-0 = <¬ify_led>; - led@1 { + led-user1 { label = "apq8064:green:user1"; color = <LED_COLOR_ID_GREEN>; gpios = <&pm8921_gpio 18 GPIO_ACTIVE_HIGH>; @@ -57,326 +46,314 @@ }; }; - soc { - pinctrl@800000 { - card_detect: card_detect { - mux { - pins = "gpio26"; - function = "gpio"; - bias-disable; - }; - }; + sdcc4_pwrseq: pwrseq-sdcc4 { + pinctrl-names = "default"; + pinctrl-0 = <&wlan_default_gpios>; + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&pm8921_gpio 43 GPIO_ACTIVE_LOW>; + }; - pcie_pins: pcie_pinmux { - mux { - pins = "gpio27"; - function = "gpio"; - }; - conf { - pins = "gpio27"; - drive-strength = <12>; - bias-disable; - }; - }; - }; + ext_3p3v: regulator-ext-3p3v { + compatible = "regulator-fixed"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "ext_3p3v"; + regulator-type = "voltage"; + startup-delay-us = <0>; + gpio = <&tlmm_pinmux 77 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-boot-on; + }; +}; - rpm@108000 { - regulators { - vin_lvs1_3_6-supply = <&pm8921_s4>; - vin_lvs2-supply = <&pm8921_s1>; - vin_lvs4_5_7-supply = <&pm8921_s4>; - - vdd_l1_l2_l12_l18-supply = <&pm8921_s4>; - vdd_l24-supply = <&pm8921_s1>; - vdd_l25-supply = <&pm8921_s1>; - vdd_l26-supply = <&pm8921_s7>; - vdd_l27-supply = <&pm8921_s7>; - vdd_l28-supply = <&pm8921_s7>; - - - /* Buck SMPS */ - s1 { - regulator-always-on; - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - qcom,switch-mode-frequency = <3200000>; - bias-pull-down; - }; - - s3 { - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1400000>; - qcom,switch-mode-frequency = <4800000>; - }; - - s4 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - qcom,switch-mode-frequency = <3200000>; - }; - - s7 { - regulator-min-microvolt = <1300000>; - regulator-max-microvolt = <1300000>; - qcom,switch-mode-frequency = <3200000>; - }; - - l3 { - regulator-min-microvolt = <3050000>; - regulator-max-microvolt = <3300000>; - bias-pull-down; - }; - - l4 { - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1800000>; - bias-pull-down; - }; - - l5 { - regulator-min-microvolt = <2750000>; - regulator-max-microvolt = <3000000>; - bias-pull-down; - }; - - l6 { - regulator-min-microvolt = <2950000>; - regulator-max-microvolt = <2950000>; - bias-pull-down; - }; - - l23 { - regulator-min-microvolt = <1700000>; - regulator-max-microvolt = <1900000>; - bias-pull-down; - }; - - lvs1 { - bias-pull-down; - }; - - lvs6 { - bias-pull-down; - }; - }; - }; +&gsbi1 { + qcom,mode = <GSBI_PROT_I2C>; + status = "okay"; +}; - ext_3p3v: regulator-fixed@1 { - compatible = "regulator-fixed"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "ext_3p3v"; - regulator-type = "voltage"; - startup-delay-us = <0>; - gpio = <&tlmm_pinmux 77 GPIO_ACTIVE_HIGH>; - enable-active-high; - regulator-boot-on; - }; +&gsbi1_i2c { + clock-frequency = <200000>; + status = "okay"; - gsbi3: gsbi@16200000 { - status = "okay"; - qcom,mode = <GSBI_PROT_I2C>; - i2c@16280000 { - status = "okay"; - }; - }; + eeprom@52 { + compatible = "atmel,24c128"; + reg = <0x52>; + pagesize = <32>; + }; +}; - gsbi@16300000 { - status = "okay"; - qcom,mode = <GSBI_PROT_I2C>; - /* CAM I2C MIPI-CSI connector */ - i2c@16380000 { - status = "okay"; - }; - }; +&gsbi3 { + qcom,mode = <GSBI_PROT_I2C>; + status = "okay"; +}; + +&gsbi3_i2c { + status = "okay"; +}; - gsbi@12440000 { - status = "okay"; - qcom,mode = <GSBI_PROT_I2C>; +&gsbi4 { + qcom,mode = <GSBI_PROT_I2C>; + status = "okay"; +}; - i2c@12460000 { - status = "okay"; - clock-frequency = <200000>; +/* CAM I2C MIPI-CSI connector */ +&gsbi4_i2c { + status = "okay"; +}; - eeprom@52 { - compatible = "atmel,24c128"; - reg = <0x52>; - pagesize = <32>; - }; - }; - }; +&gsbi5 { + qcom,mode = <GSBI_PROT_SPI>; + status = "okay"; +}; - gsbi@1a200000 { - qcom,mode = <GSBI_PROT_SPI>; - status = "okay"; - spi4: spi@1a280000 { - status = "okay"; - num-cs = <1>; - cs-gpios = <&tlmm_pinmux 53 0>; - }; - }; +&gsbi5_spi { + num-cs = <1>; + cs-gpios = <&tlmm_pinmux 53 0>; + status = "okay"; +}; + +&gsbi6 { + qcom,mode = <GSBI_PROT_UART_W_FC>; + status = "okay"; +}; - gsbi@16500000 { - status = "okay"; - qcom,mode = <GSBI_PROT_UART_W_FC>; +&gsbi6_serial { + pinctrl-names = "default"; + pinctrl-0 = <&gsbi6_uart_4pins>; + status = "okay"; +}; - serial@16540000 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&gsbi6_uart_4pins>; - }; +&gsbi7 { + qcom,mode = <GSBI_PROT_I2C_UART>; + status = "okay"; +}; + +&gsbi7_serial { + pinctrl-names = "default"; + pinctrl-0 = <&gsbi7_uart_2pins>; + status = "okay"; +}; + +&hdmi { + core-vdda-supply = <&pm8921_hdmi_switch>; + hpd-gpios = <&tlmm_pinmux 72 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&hdmi_in { + remote-endpoint = <&mdp_dtv_out>; +}; + +&hdmi_out { + remote-endpoint = <&hdmi_con>; +}; + +&hdmi_phy { + status = "okay"; + core-vdda-supply = <&pm8921_hdmi_switch>; +}; + +&mdp { + status = "okay"; +}; + +&mdp_dtv_out { + remote-endpoint = <&hdmi_in>; +}; + +&pcie { + status = "okay"; + vdda-supply = <&pm8921_s3>; + vdda_phy-supply = <&pm8921_lvs6>; + vdda_refclk-supply = <&ext_3p3v>; + pinctrl-0 = <&pcie_pins>; + pinctrl-names = "default"; + perst-gpios = <&tlmm_pinmux 27 GPIO_ACTIVE_LOW>; +}; + +&pm8921_gpio { + wlan_default_gpios: wlan-gpios-state { + pinconf { + pins = "gpio43"; + function = "normal"; + bias-disable; + power-source = <PM8921_GPIO_S4>; }; + }; - gsbi@16600000 { - status = "okay"; - qcom,mode = <GSBI_PROT_I2C_UART>; - serial@16640000 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&gsbi7_uart_2pins>; - }; + notify_led: nled-state { + pinconf { + pins = "gpio18"; + function = "normal"; + bias-disable; + power-source = <PM8921_GPIO_S4>; }; + }; +}; - sata_phy0: phy@1b400000 { - status = "okay"; +&rpm { + regulators { + vin_lvs1_3_6-supply = <&pm8921_s4>; + vin_lvs2-supply = <&pm8921_s1>; + vin_lvs4_5_7-supply = <&pm8921_s4>; + + vdd_l1_l2_l12_l18-supply = <&pm8921_s4>; + vdd_l24-supply = <&pm8921_s1>; + vdd_l25-supply = <&pm8921_s1>; + vdd_l26-supply = <&pm8921_s7>; + vdd_l27-supply = <&pm8921_s7>; + vdd_l28-supply = <&pm8921_s7>; + + + /* Buck SMPS */ + s1 { + regulator-always-on; + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + qcom,switch-mode-frequency = <3200000>; + bias-pull-down; }; - sata0: sata@29000000 { - status = "okay"; - target-supply = <&pm8921_s4>; + s3 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + qcom,switch-mode-frequency = <4800000>; }; - /* OTG */ - usb@12500000 { - status = "okay"; - dr_mode = "otg"; - ulpi { - phy { - v3p3-supply = <&pm8921_l3>; - v1p8-supply = <&pm8921_l4>; - }; - }; + s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + qcom,switch-mode-frequency = <3200000>; }; - usb@12520000 { - status = "okay"; - dr_mode = "host"; - ulpi { - phy { - v3p3-supply = <&pm8921_l3>; - v1p8-supply = <&pm8921_l23>; - }; - }; + s7 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + qcom,switch-mode-frequency = <3200000>; }; - usb@12530000 { - status = "okay"; - dr_mode = "host"; - ulpi { - phy { - v3p3-supply = <&pm8921_l3>; - v1p8-supply = <&pm8921_l23>; - }; - }; + l3 { + regulator-min-microvolt = <3050000>; + regulator-max-microvolt = <3300000>; + bias-pull-down; }; - pci@1b500000 { - status = "okay"; - vdda-supply = <&pm8921_s3>; - vdda_phy-supply = <&pm8921_lvs6>; - vdda_refclk-supply = <&ext_3p3v>; - pinctrl-0 = <&pcie_pins>; - pinctrl-names = "default"; - perst-gpios = <&tlmm_pinmux 27 GPIO_ACTIVE_LOW>; + l4 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1800000>; + bias-pull-down; }; - qcom,ssbi@500000 { - pmic@0 { - gpio@150 { - wlan_default_gpios: wlan-gpios-state { - pinconf { - pins = "gpio43"; - function = "normal"; - bias-disable; - power-source = <PM8921_GPIO_S4>; - }; - }; - - notify_led: nled-state { - pinconf { - pins = "gpio18"; - function = "normal"; - bias-disable; - power-source = <PM8921_GPIO_S4>; - }; - }; - }; - }; + l5 { + regulator-min-microvolt = <2750000>; + regulator-max-microvolt = <3000000>; + bias-pull-down; }; - amba { - /* eMMC */ - sdcc1: mmc@12400000 { - status = "okay"; - vmmc-supply = <&pm8921_l5>; - vqmmc-supply = <&pm8921_s4>; - }; + l6 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + bias-pull-down; + }; - /* External micro SD card */ - sdcc3: mmc@12180000 { - status = "okay"; - vmmc-supply = <&pm8921_l6>; - pinctrl-names = "default"; - pinctrl-0 = <&card_detect>; - cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>; - }; - /* WLAN */ - sdcc4: mmc@121c0000 { - status = "okay"; - vmmc-supply = <&ext_3p3v>; - vqmmc-supply = <&pm8921_lvs1>; - mmc-pwrseq = <&sdcc4_pwrseq>; - }; + l23 { + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <1900000>; + bias-pull-down; }; - hdmi-tx@4a00000 { - status = "okay"; + lvs1 { + bias-pull-down; + }; - core-vdda-supply = <&pm8921_hdmi_switch>; + lvs6 { + bias-pull-down; + }; + }; +}; - hpd-gpios = <&tlmm_pinmux 72 GPIO_ACTIVE_HIGH>; +&sata_phy0 { + status = "okay"; +}; - ports { - port@0 { - endpoint { - remote-endpoint = <&mdp_dtv_out>; - }; - }; +&sata0 { + target-supply = <&pm8921_s4>; + status = "okay"; +}; - port@1 { - endpoint { - remote-endpoint = <&hdmi_con>; - }; - }; - }; - }; +/* eMMC */ +&sdcc1 { + vmmc-supply = <&pm8921_l5>; + vqmmc-supply = <&pm8921_s4>; + status = "okay"; +}; - hdmi-phy@4a00400 { - status = "okay"; +/* External micro SD card */ +&sdcc3 { + vmmc-supply = <&pm8921_l6>; + pinctrl-names = "default"; + pinctrl-0 = <&card_detect>; + cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>; + status = "okay"; +}; - core-vdda-supply = <&pm8921_hdmi_switch>; - }; +/* WLAN */ +&sdcc4 { + vmmc-supply = <&ext_3p3v>; + vqmmc-supply = <&pm8921_lvs1>; + mmc-pwrseq = <&sdcc4_pwrseq>; + status = "okay"; +}; - mdp@5100000 { - status = "okay"; +&tlmm_pinmux { + card_detect: card_detect { + mux { + pins = "gpio26"; + function = "gpio"; + bias-disable; + }; + }; - ports { - port@3 { - endpoint { - remote-endpoint = <&hdmi_in>; - }; - }; - }; + pcie_pins: pcie_pinmux { + mux { + pins = "gpio27"; + function = "gpio"; + }; + conf { + pins = "gpio27"; + drive-strength = <12>; + bias-disable; }; }; }; + +&usb_hs1_phy { + v3p3-supply = <&pm8921_l3>; + v1p8-supply = <&pm8921_l4>; +}; + +&usb_hs3_phy { + v3p3-supply = <&pm8921_l3>; + v1p8-supply = <&pm8921_l23>; +}; + +&usb_hs4_phy { + v3p3-supply = <&pm8921_l3>; + v1p8-supply = <&pm8921_l23>; +}; + +/* OTG */ +&usb1 { + dr_mode = "otg"; + status = "okay"; +}; + +&usb3 { + dr_mode = "host"; + status = "okay"; +}; + +&usb4 { + dr_mode = "host"; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/qcom-apq8064-sony-xperia-lagan-yuga.dts b/arch/arm/boot/dts/qcom-apq8064-sony-xperia-lagan-yuga.dts index c07c5474750d..9244512b74d1 100644 --- a/arch/arm/boot/dts/qcom-apq8064-sony-xperia-lagan-yuga.dts +++ b/arch/arm/boot/dts/qcom-apq8064-sony-xperia-lagan-yuga.dts @@ -8,6 +8,7 @@ / { model = "Sony Xperia Z"; compatible = "sony,xperia-yuga", "qcom,apq8064"; + chassis-type = "handset"; aliases { serial0 = &gsbi5_serial; @@ -51,351 +52,338 @@ linux,code = <KEY_VOLUMEUP>; }; }; +}; + +&gsbi5 { + qcom,mode = <GSBI_PROT_I2C_UART>; + status = "okay"; +}; + +&gsbi5_serial { + pinctrl-names = "default"; + pinctrl-0 = <&gsbi5_uart_pin_a>; + status = "okay"; +}; + +&pm8921_gpio { + gpio_keys_pin_a: gpio-keys-active-state { + pins = "gpio3", "gpio4", "gpio29", "gpio35"; + function = "normal"; + + bias-pull-up; + drive-push-pull; + input-enable; + power-source = <2>; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; + qcom,pull-up-strength = <0>; + }; +}; + +&riva { + pinctrl-names = "default"; + pinctrl-0 = <&riva_wlan_pin_a>, <&riva_bt_pin_a>, <&riva_fm_pin_a>; + status = "okay"; +}; + +&rpm { + regulators { + vin_l1_l2_l12_l18-supply = <&pm8921_s4>; + vin_lvs_1_3_6-supply = <&pm8921_s4>; + vin_lvs_4_5_7-supply = <&pm8921_s4>; + vin_ncp-supply = <&pm8921_l6>; + vin_lvs2-supply = <&pm8921_s4>; + vin_l24-supply = <&pm8921_s1>; + vin_l25-supply = <&pm8921_s1>; + vin_l27-supply = <&pm8921_s7>; + vin_l28-supply = <&pm8921_s7>; + + /* Buck SMPS */ + s1 { + regulator-always-on; + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + qcom,switch-mode-frequency = <3200000>; + bias-pull-down; + }; + + s2 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + qcom,switch-mode-frequency = <1600000>; + bias-pull-down; + }; + + s3 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1150000>; + qcom,switch-mode-frequency = <4800000>; + bias-pull-down; + }; + + s4 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + qcom,switch-mode-frequency = <1600000>; + bias-pull-down; + qcom,force-mode = <QCOM_RPM_FORCE_MODE_AUTO>; + }; + + s7 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + qcom,switch-mode-frequency = <3200000>; + }; + + s8 { + regulator-min-microvolt = <2200000>; + regulator-max-microvolt = <2200000>; + qcom,switch-mode-frequency = <1600000>; + }; + + /* PMOS LDO */ + l1 { + regulator-always-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + bias-pull-down; + }; - soc { - pinctrl@800000 { - gsbi5_uart_pin_a: gsbi5-uart-pin-active { - rx { - pins = "gpio52"; - function = "gsbi5"; - drive-strength = <2>; - bias-pull-up; - }; - - tx { - pins = "gpio51"; - function = "gsbi5"; - drive-strength = <4>; - bias-disable; - }; - }; - - - sdcc3_cd_pin_a: sdcc3-cd-pin-active { - pins = "gpio26"; - function = "gpio"; - - drive-strength = <2>; - bias-disable; - }; - }; - - - rpm@108000 { - regulators { - vin_l1_l2_l12_l18-supply = <&pm8921_s4>; - vin_lvs_1_3_6-supply = <&pm8921_s4>; - vin_lvs_4_5_7-supply = <&pm8921_s4>; - vin_ncp-supply = <&pm8921_l6>; - vin_lvs2-supply = <&pm8921_s4>; - vin_l24-supply = <&pm8921_s1>; - vin_l25-supply = <&pm8921_s1>; - vin_l27-supply = <&pm8921_s7>; - vin_l28-supply = <&pm8921_s7>; - - /* Buck SMPS */ - s1 { - regulator-always-on; - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - qcom,switch-mode-frequency = <3200000>; - bias-pull-down; - }; - - s2 { - regulator-min-microvolt = <1300000>; - regulator-max-microvolt = <1300000>; - qcom,switch-mode-frequency = <1600000>; - bias-pull-down; - }; - - s3 { - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1150000>; - qcom,switch-mode-frequency = <4800000>; - bias-pull-down; - }; - - s4 { - regulator-always-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - qcom,switch-mode-frequency = <1600000>; - bias-pull-down; - qcom,force-mode = <QCOM_RPM_FORCE_MODE_AUTO>; - }; - - s7 { - regulator-min-microvolt = <1300000>; - regulator-max-microvolt = <1300000>; - qcom,switch-mode-frequency = <3200000>; - }; - - s8 { - regulator-min-microvolt = <2200000>; - regulator-max-microvolt = <2200000>; - qcom,switch-mode-frequency = <1600000>; - }; - - /* PMOS LDO */ - l1 { - regulator-always-on; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; - bias-pull-down; - }; - - l2 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - bias-pull-down; - }; - - l3 { - regulator-min-microvolt = <3075000>; - regulator-max-microvolt = <3075000>; - bias-pull-down; - }; - - l4 { - regulator-always-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - bias-pull-down; - }; - - l5 { - regulator-min-microvolt = <2950000>; - regulator-max-microvolt = <2950000>; - bias-pull-down; - }; - - l6 { - regulator-min-microvolt = <2950000>; - regulator-max-microvolt = <2950000>; - bias-pull-down; - }; - - l7 { - regulator-min-microvolt = <1850000>; - regulator-max-microvolt = <2950000>; - bias-pull-down; - }; - - l8 { - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - bias-pull-down; - }; - - l9 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - bias-pull-down; - }; - - l10 { - regulator-min-microvolt = <2900000>; - regulator-max-microvolt = <2900000>; - bias-pull-down; - }; - - l11 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - bias-pull-down; - }; - - l12 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - bias-pull-down; - }; - - l14 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - bias-pull-down; - }; - - l15 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - bias-pull-down; - }; - - l16 { - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - bias-pull-down; - }; - - l17 { - regulator-min-microvolt = <2000000>; - regulator-max-microvolt = <2000000>; - bias-pull-down; - }; - - l18 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - bias-pull-down; - }; - - l21 { - regulator-min-microvolt = <1050000>; - regulator-max-microvolt = <1050000>; - bias-pull-down; - }; - - l22 { - regulator-min-microvolt = <2600000>; - regulator-max-microvolt = <2600000>; - bias-pull-down; - }; - - l23 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - bias-pull-down; - }; - - l24 { - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <1150000>; - bias-pull-down; - }; - - l25 { - regulator-always-on; - regulator-min-microvolt = <1250000>; - regulator-max-microvolt = <1250000>; - bias-pull-down; - }; - - l27 { - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; - }; - - l28 { - regulator-min-microvolt = <1050000>; - regulator-max-microvolt = <1050000>; - bias-pull-down; - }; - - l29 { - regulator-min-microvolt = <2000000>; - regulator-max-microvolt = <2000000>; - bias-pull-down; - }; - - /* Low Voltage Switch */ - lvs1 { - bias-pull-down; - }; - - lvs2 { - bias-pull-down; - }; - - lvs3 { - bias-pull-down; - }; - - lvs4 { - bias-pull-down; - }; - - lvs5 { - bias-pull-down; - }; - - lvs6 { - bias-pull-down; - }; - - lvs7 { - bias-pull-down; - }; - - usb-switch {}; - - hdmi-switch {}; - - ncp { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - qcom,switch-mode-frequency = <1600000>; - }; - }; - }; - - qcom,ssbi@500000 { - pmic@0 { - gpio@150 { - gpio_keys_pin_a: gpio-keys-active-state { - pins = "gpio3", "gpio4", "gpio29", "gpio35"; - function = "normal"; - - bias-pull-up; - drive-push-pull; - input-enable; - power-source = <2>; - qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; - qcom,pull-up-strength = <0>; - }; - }; - }; - }; - - usb@12500000 { - status = "okay"; - dr_mode = "otg"; - ulpi { - phy { - v3p3-supply = <&pm8921_l3>; - v1p8-supply = <&pm8921_l4>; - }; - }; + l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + bias-pull-down; }; - gsbi@1a200000 { - status = "okay"; - qcom,mode = <GSBI_PROT_I2C_UART>; + l3 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + bias-pull-down; + }; + + l4 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + bias-pull-down; + }; + + l5 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + bias-pull-down; + }; + + l6 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + bias-pull-down; + }; + + l7 { + regulator-min-microvolt = <1850000>; + regulator-max-microvolt = <2950000>; + bias-pull-down; + }; + + l8 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + bias-pull-down; + }; + + l9 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + bias-pull-down; + }; + + l10 { + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + bias-pull-down; + }; - serial@1a240000 { - status = "okay"; + l11 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + bias-pull-down; + }; + + l12 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + bias-pull-down; + }; - pinctrl-names = "default"; - pinctrl-0 = <&gsbi5_uart_pin_a>; - }; + l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + bias-pull-down; }; - amba { - sdcc1: mmc@12400000 { - status = "okay"; + l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + bias-pull-down; + }; - vmmc-supply = <&pm8921_l5>; - vqmmc-supply = <&pm8921_s4>; - }; + l16 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + bias-pull-down; + }; - sdcc3: mmc@12180000 { - status = "okay"; + l17 { + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + bias-pull-down; + }; - vmmc-supply = <&pm8921_l6>; - cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>; + l18 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + bias-pull-down; + }; - pinctrl-names = "default"; - pinctrl-0 = <&sdcc3_pins>, <&sdcc3_cd_pin_a>; - }; + l21 { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + bias-pull-down; }; - riva-pil@3204000 { - status = "okay"; + l22 { + regulator-min-microvolt = <2600000>; + regulator-max-microvolt = <2600000>; + bias-pull-down; + }; - pinctrl-names = "default"; - pinctrl-0 = <&riva_wlan_pin_a>, <&riva_bt_pin_a>, <&riva_fm_pin_a>; + l23 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + bias-pull-down; + }; + + l24 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1150000>; + bias-pull-down; + }; + + l25 { + regulator-always-on; + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1250000>; + bias-pull-down; + }; + + l27 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + }; + + l28 { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + bias-pull-down; + }; + + l29 { + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + bias-pull-down; + }; + + /* Low Voltage Switch */ + lvs1 { + bias-pull-down; + }; + + lvs2 { + bias-pull-down; + }; + + lvs3 { + bias-pull-down; + }; + + lvs4 { + bias-pull-down; + }; + + lvs5 { + bias-pull-down; + }; + + lvs6 { + bias-pull-down; + }; + + lvs7 { + bias-pull-down; + }; + + usb-switch {}; + + hdmi-switch {}; + + ncp { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + qcom,switch-mode-frequency = <1600000>; }; }; }; + +&sdcc1 { + vmmc-supply = <&pm8921_l5>; + vqmmc-supply = <&pm8921_s4>; + status = "okay"; +}; + +&sdcc3 { + vmmc-supply = <&pm8921_l6>; + cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>; + + pinctrl-names = "default"; + pinctrl-0 = <&sdcc3_pins>, <&sdcc3_cd_pin_a>; + + status = "okay"; +}; + +&tlmm_pinmux { + gsbi5_uart_pin_a: gsbi5-uart-pin-active { + rx { + pins = "gpio52"; + function = "gsbi5"; + drive-strength = <2>; + bias-pull-up; + }; + + tx { + pins = "gpio51"; + function = "gsbi5"; + drive-strength = <4>; + bias-disable; + }; + }; + + + sdcc3_cd_pin_a: sdcc3-cd-pin-active { + pins = "gpio26"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; +}; + +&usb_hs1_phy { + v3p3-supply = <&pm8921_l3>; + v1p8-supply = <&pm8921_l4>; +}; + +&usb1 { + dr_mode = "otg"; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi index 942aa2278355..0da9623ea084 100644 --- a/arch/arm/boot/dts/qcom-apq8064.dtsi +++ b/arch/arm/boot/dts/qcom-apq8064.dtsi @@ -672,7 +672,7 @@ reg = <0x00c00000 0x1000>; qcom,controller-type = "pmic-arbiter"; - pm8821: pmic@1 { + pm8821: pmic { compatible = "qcom,pm8821"; interrupt-parent = <&tlmm_pinmux>; interrupts = <76 IRQ_TYPE_LEVEL_LOW>; @@ -693,12 +693,12 @@ }; }; - qcom,ssbi@500000 { + ssbi@500000 { compatible = "qcom,ssbi"; reg = <0x00500000 0x1000>; qcom,controller-type = "pmic-arbiter"; - pmicintc: pmic@0 { + pmicintc: pmic { compatible = "qcom,pm8921"; interrupt-parent = <&tlmm_pinmux>; interrupts = <74 8>; @@ -884,7 +884,7 @@ reg = <0x2011000 0x1000>; }; - rpm@108000 { + rpm: rpm@108000 { compatible = "qcom,rpm-apq8064"; reg = <0x108000 0x1000>; qcom,ipc = <&l2cc 0x8 2>; @@ -1085,15 +1085,21 @@ ports-implemented = <0x1>; }; - /* Temporary fixed regulator */ - sdcc1bam: dma-controller@12402000{ - compatible = "qcom,bam-v1.3.0"; - reg = <0x12402000 0x8000>; - interrupts = <0 98 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc SDC1_H_CLK>; - clock-names = "bam_clk"; - #dma-cells = <1>; - qcom,ee = <0>; + sdcc3: mmc@12180000 { + compatible = "arm,pl18x", "arm,primecell"; + arm,primecell-periphid = <0x00051180>; + status = "disabled"; + reg = <0x12180000 0x2000>; + interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>; + clock-names = "mclk", "apb_pclk"; + bus-width = <4>; + cap-sd-highspeed; + cap-mmc-highspeed; + max-frequency = <192000000>; + no-1-8-v; + dmas = <&sdcc3bam 2>, <&sdcc3bam 1>; + dma-names = "tx", "rx"; }; sdcc3bam: dma-controller@12182000{ @@ -1106,6 +1112,24 @@ qcom,ee = <0>; }; + sdcc4: mmc@121c0000 { + compatible = "arm,pl18x", "arm,primecell"; + arm,primecell-periphid = <0x00051180>; + status = "disabled"; + reg = <0x121c0000 0x2000>; + interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc SDC4_CLK>, <&gcc SDC4_H_CLK>; + clock-names = "mclk", "apb_pclk"; + bus-width = <4>; + cap-sd-highspeed; + cap-mmc-highspeed; + max-frequency = <48000000>; + dmas = <&sdcc4bam 2>, <&sdcc4bam 1>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&sdc4_gpios>; + }; + sdcc4bam: dma-controller@121c2000{ compatible = "qcom,bam-v1.3.0"; reg = <0x121c2000 0x8000>; @@ -1116,67 +1140,33 @@ qcom,ee = <0>; }; - amba { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - sdcc1: mmc@12400000 { - status = "disabled"; - compatible = "arm,pl18x", "arm,primecell"; - pinctrl-names = "default"; - pinctrl-0 = <&sdcc1_pins>; - arm,primecell-periphid = <0x00051180>; - reg = <0x12400000 0x2000>; - interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "cmd_irq"; - clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>; - clock-names = "mclk", "apb_pclk"; - bus-width = <8>; - max-frequency = <96000000>; - non-removable; - cap-sd-highspeed; - cap-mmc-highspeed; - dmas = <&sdcc1bam 2>, <&sdcc1bam 1>; - dma-names = "tx", "rx"; - }; - - sdcc3: mmc@12180000 { - compatible = "arm,pl18x", "arm,primecell"; - arm,primecell-periphid = <0x00051180>; - status = "disabled"; - reg = <0x12180000 0x2000>; - interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "cmd_irq"; - clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>; - clock-names = "mclk", "apb_pclk"; - bus-width = <4>; - cap-sd-highspeed; - cap-mmc-highspeed; - max-frequency = <192000000>; - no-1-8-v; - dmas = <&sdcc3bam 2>, <&sdcc3bam 1>; - dma-names = "tx", "rx"; - }; + sdcc1: mmc@12400000 { + status = "disabled"; + compatible = "arm,pl18x", "arm,primecell"; + pinctrl-names = "default"; + pinctrl-0 = <&sdcc1_pins>; + arm,primecell-periphid = <0x00051180>; + reg = <0x12400000 0x2000>; + interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>; + clock-names = "mclk", "apb_pclk"; + bus-width = <8>; + max-frequency = <96000000>; + non-removable; + cap-sd-highspeed; + cap-mmc-highspeed; + dmas = <&sdcc1bam 2>, <&sdcc1bam 1>; + dma-names = "tx", "rx"; + }; - sdcc4: mmc@121c0000 { - compatible = "arm,pl18x", "arm,primecell"; - arm,primecell-periphid = <0x00051180>; - status = "disabled"; - reg = <0x121c0000 0x2000>; - interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "cmd_irq"; - clocks = <&gcc SDC4_CLK>, <&gcc SDC4_H_CLK>; - clock-names = "mclk", "apb_pclk"; - bus-width = <4>; - cap-sd-highspeed; - cap-mmc-highspeed; - max-frequency = <48000000>; - dmas = <&sdcc4bam 2>, <&sdcc4bam 1>; - dma-names = "tx", "rx"; - pinctrl-names = "default"; - pinctrl-0 = <&sdc4_gpios>; - }; + sdcc1bam: dma-controller@12402000{ + compatible = "qcom,bam-v1.3.0"; + reg = <0x12402000 0x8000>; + interrupts = <0 98 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc SDC1_H_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; }; tcsr: syscon@1a400000 { @@ -1316,7 +1306,6 @@ <&dsi0_phy 1>; syscon-sfpb = <&mmss_sfpb>; phys = <&dsi0_phy>; - phy-names = "dsi"; status = "disabled"; ports { @@ -1338,7 +1327,7 @@ }; - dsi0_phy: dsi-phy@4700200 { + dsi0_phy: phy@4700200 { compatible = "qcom,dsi-phy-28nm-8960"; #clock-cells = <1>; #phy-cells = <0>; @@ -1470,6 +1459,8 @@ phys = <&hdmi_phy>; + status = "disabled"; + ports { #address-cells = <1>; #size-cells = <0>; @@ -1488,7 +1479,7 @@ }; }; - hdmi_phy: hdmi-phy@4a00400 { + hdmi_phy: phy@4a00400 { compatible = "qcom,hdmi-phy-8960"; reg = <0x4a00400 0x60>, <0x4a00500 0x100>; @@ -1498,6 +1489,8 @@ clocks = <&mmcc HDMI_S_AHB_CLK>; clock-names = "slave_iface"; #phy-cells = <0>; + + status = "disabled"; }; mdp: mdp@5100000 { @@ -1552,7 +1545,7 @@ }; }; - riva: riva-pil@3204000 { + riva: riva-pil@3200800 { compatible = "qcom,riva-pil"; reg = <0x03200800 0x1000>, <0x03202000 0x2000>, <0x03204000 0x100>; @@ -1615,7 +1608,7 @@ }; etb@1a01000 { - compatible = "coresight-etb10", "arm,primecell"; + compatible = "arm,coresight-etb10", "arm,primecell"; reg = <0x1a01000 0x1000>; clocks = <&rpmcc RPM_QDSS_CLK>; diff --git a/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts index 91716298ec5e..1345df7cbd00 100644 --- a/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts +++ b/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts @@ -35,30 +35,8 @@ }; }; -&otg { - status = "okay"; - - phys = <&usb_hs2_phy>; - phy-select = <&tcsr 0xb000 1>; - extcon = <&smbb>, <&usb_id>; - vbus-supply = <&chg_otg>; - hnp-disable; - srp-disable; - adp-disable; - - ulpi { - phy@b { - status = "okay"; - v3p3-supply = <&pm8941_l24>; - v1p8-supply = <&pm8941_l6>; - extcon = <&smbb>; - qcom,init-seq = /bits/ 8 <0x1 0x63>; - }; - }; -}; - &rpm_requests { - pm8841-regulators { + regulators-0 { compatible = "qcom,rpm-pm8841-regulators"; pm8841_s1: s1 { @@ -82,7 +60,7 @@ }; }; - pm8941-regulators { + regulators-1 { compatible = "qcom,rpm-pm8941-regulators"; vdd_l1_l3-supply = <&pm8941_s1>; @@ -272,34 +250,34 @@ }; &tlmm { - sdc1_on: sdc1-on { - clk { + sdc1_on: sdc1-on-state { + clk-pins { pins = "sdc1_clk"; drive-strength = <16>; bias-disable; }; - cmd-data { + cmd-data-pins { pins = "sdc1_cmd", "sdc1_data"; drive-strength = <10>; bias-pull-up; }; }; - sdc2_on: sdc2-on { - clk { + sdc2_on: sdc2-on-state { + clk-pins { pins = "sdc2_clk"; drive-strength = <10>; bias-disable; }; - cmd-data { + cmd-data-pins { pins = "sdc2_cmd", "sdc2_data"; drive-strength = <6>; bias-pull-up; }; - cd { + cd-pins { pins = "gpio62"; function = "gpio"; drive-strength = <2>; @@ -307,3 +285,23 @@ }; }; }; + +&usb { + status = "okay"; + + phys = <&usb_hs2_phy>; + phy-select = <&tcsr 0xb000 1>; + extcon = <&smbb>, <&usb_id>; + vbus-supply = <&chg_otg>; + hnp-disable; + srp-disable; + adp-disable; +}; + +&usb_hs2_phy { + status = "okay"; + v3p3-supply = <&pm8941_l24>; + v1p8-supply = <&pm8941_l6>; + extcon = <&smbb>; + qcom,init-seq = /bits/ 8 <0x1 0x63>; +}; diff --git a/arch/arm/boot/dts/qcom-apq8084.dtsi b/arch/arm/boot/dts/qcom-apq8084.dtsi index f2fb7c975af8..fe30abfff90a 100644 --- a/arch/arm/boot/dts/qcom-apq8084.dtsi +++ b/arch/arm/boot/dts/qcom-apq8084.dtsi @@ -72,7 +72,7 @@ }; L2: l2-cache { - compatible = "qcom,arch-cache"; + compatible = "cache"; cache-level = <2>; qcom,saw = <&saw_l2>; }; @@ -258,12 +258,14 @@ }; tsens: thermal-sensor@fc4a8000 { - compatible = "qcom,msm8974-tsens"; + compatible = "qcom,msm8974-tsens", "qcom,tsens-v0_1"; reg = <0xfc4a9000 0x1000>, /* TM */ <0xfc4a8000 0x1000>; /* SROT */ nvmem-cells = <&tsens_calib>, <&tsens_backup>; nvmem-cell-names = "calib", "calib_backup"; #qcom,sensors = <11>; + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow"; #thermal-sensor-cells = <1>; }; timer@f9020000 { @@ -394,7 +396,7 @@ #hwlock-cells = <1>; }; - rpm_msg_ram: memory@fc428000 { + rpm_msg_ram: sram@fc428000 { compatible = "qcom,rpm-msg-ram"; reg = <0xfc428000 0x4000>; }; @@ -474,7 +476,7 @@ compatible = "qcom,rpm-apq8084"; qcom,smd-channels = "rpm_requests"; - pma8084-regulators { + regulators-0 { compatible = "qcom,rpm-pma8084-regulators"; pma8084_s1: s1 {}; diff --git a/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac-bit.dts b/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac-bit.dts index cf7da1ab177c..1b27edce9d4f 100644 --- a/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac-bit.dts +++ b/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac-bit.dts @@ -9,7 +9,7 @@ leds { compatible = "gpio-leds"; - power { + led-power { label = "ap120c-ac:green:power"; function = LED_FUNCTION_POWER; color = <LED_COLOR_ID_GREEN>; @@ -17,14 +17,14 @@ default-state = "on"; }; - wlan { + led-wlan { label = "ap120c-ac:green:wlan"; function = LED_FUNCTION_WLAN; color = <LED_COLOR_ID_GREEN>; gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>; }; - support { + led-support { label = "ap120c-ac:green:support"; color = <LED_COLOR_ID_GREEN>; gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts b/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts index c4f89b712fd9..a707057c887d 100644 --- a/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts +++ b/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts @@ -7,7 +7,7 @@ leds { compatible = "gpio-leds"; - status: status { + status: led-status { label = "ap120c-ac:blue:status"; function = LED_FUNCTION_STATUS; color = <LED_COLOR_ID_BLUE>; @@ -15,7 +15,7 @@ default-state = "keep"; }; - wlan2g { + led-wlan2g { label = "ap120c-ac:green:wlan2g"; function = LED_FUNCTION_WLAN; color = <LED_COLOR_ID_GREEN>; @@ -23,7 +23,7 @@ linux,default-trigger = "phy0tpt"; }; - wlan5g { + led-wlan5g { label = "ap120c-ac:red:wlan5g"; function = LED_FUNCTION_WLAN; color = <LED_COLOR_ID_RED>; diff --git a/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dtsi b/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dtsi index af9a26fb5d4a..a5a6f3ebb274 100644 --- a/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dtsi +++ b/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dtsi @@ -6,7 +6,7 @@ / { model = "ALFA Network AP120C-AC"; - compatible = "alfa-network,ap120c-ac"; + compatible = "alfa-network,ap120c-ac", "qcom,ipq4018"; keys { compatible = "gpio-keys"; diff --git a/arch/arm/boot/dts/qcom-ipq4018-jalapeno.dts b/arch/arm/boot/dts/qcom-ipq4018-jalapeno.dts index 394412619894..365fbac417fd 100644 --- a/arch/arm/boot/dts/qcom-ipq4018-jalapeno.dts +++ b/arch/arm/boot/dts/qcom-ipq4018-jalapeno.dts @@ -7,7 +7,7 @@ / { model = "8devices Jalapeno"; - compatible = "8dev,jalapeno"; + compatible = "8dev,jalapeno", "qcom,ipq4018"; }; &tlmm { diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi index b23591110bd2..acb08dcf9442 100644 --- a/arch/arm/boot/dts/qcom-ipq4019.dtsi +++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi @@ -348,7 +348,7 @@ saw0: regulator@b089000 { compatible = "qcom,saw2"; reg = <0x0b089000 0x1000>, <0x0b009000 0x1000>; - regulator; + regulator; }; saw1: regulator@b099000 { diff --git a/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts b/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts index 5a65cce2500c..f908889c4f95 100644 --- a/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts +++ b/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts @@ -5,7 +5,7 @@ / { model = "MikroTik RB3011UiAS-RM"; - compatible = "mikrotik,rb3011"; + compatible = "mikrotik,rb3011", "qcom,ipq8064"; aliases { serial0 = &gsbi7_serial; @@ -264,8 +264,7 @@ &nand { status = "okay"; - nandcs@0 { - compatible = "qcom,nandcs"; + nand@0 { reg = <0>; nand-ecc-strength = <4>; diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi index 90c08b51680a..7e784b0995da 100644 --- a/arch/arm/boot/dts/qcom-ipq8064.dtsi +++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi @@ -513,8 +513,8 @@ gcc: clock-controller@900000 { compatible = "qcom,gcc-ipq8064", "syscon"; - clocks = <&pxo_board>, <&cxo_board>; - clock-names = "pxo", "cxo"; + clocks = <&pxo_board>, <&cxo_board>, <&lcc PLL4>; + clock-names = "pxo", "cxo", "pll4"; reg = <0x00900000 0x4000>; #clock-cells = <1>; #reset-cells = <1>; @@ -728,7 +728,6 @@ status = "disabled"; reg = <0x12180000 0x2000>; interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "cmd_irq"; clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>; clock-names = "mclk", "apb_pclk"; bus-width = <8>; @@ -748,7 +747,6 @@ arm,primecell-periphid = <0x00051180>; reg = <0x12400000 0x2000>; interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "cmd_irq"; clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>; clock-names = "mclk", "apb_pclk"; bus-width = <8>; @@ -756,7 +754,6 @@ non-removable; cap-sd-highspeed; cap-mmc-highspeed; - mmc-ddr-1_8v; vmmc-supply = <&vsdcc_fixed>; dmas = <&sdcc1bam 2>, <&sdcc1bam 1>; dma-names = "tx", "rx"; diff --git a/arch/arm/boot/dts/qcom-mdm9615-wp8548-mangoh-green.dts b/arch/arm/boot/dts/qcom-mdm9615-wp8548-mangoh-green.dts index 0827de5426c1..a8304769b509 100644 --- a/arch/arm/boot/dts/qcom-mdm9615-wp8548-mangoh-green.dts +++ b/arch/arm/boot/dts/qcom-mdm9615-wp8548-mangoh-green.dts @@ -1,46 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT /* * Device Tree Source for mangOH Green Board with WP8548 Module * * Copyright (C) 2016 BayLibre, SAS. * Author : Neil Armstrong <narmstrong@baylibre.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/input/input.h> @@ -82,8 +45,8 @@ * - 42: IOT0_GPIO1 and SD Card Detect */ - gpioext1_pins: gpioext1_pins { - pins { + gpioext1_pins: gpioext1-state { + gpioext1-pins { pins = "gpio2"; function = "gpio"; input-enable; @@ -91,8 +54,8 @@ }; }; - sdc_cd_pins: sdc_cd_pins { - pins { + sdc_cd_pins: sdc-cd-state { + sdc-cd-pins { pins = "gpio42"; function = "gpio"; drive-strength = <2>; @@ -153,7 +116,7 @@ #size-cells = <0>; reg = <4>; - gpioext0: gpio@3e { + gpioext0: pinctrl@3e { /* GPIO Expander 0 Mapping : * - 0: ARDUINO_RESET_Level shift * - 1: BattChrgr_PG_N @@ -179,7 +142,7 @@ interrupt-parent = <&gpioext1>; interrupts = <0 IRQ_TYPE_EDGE_FALLING>; - probe-reset; + semtech,probe-reset; gpio-controller; interrupt-controller; @@ -191,7 +154,7 @@ #size-cells = <0>; reg = <5>; - gpioext1: gpio@3f { + gpioext1: pinctrl@3f { /* GPIO Expander 1 Mapping : * - 0: GPIOEXP_INT1 * - 1: Battery detect @@ -220,7 +183,7 @@ interrupt-parent = <&msmgpio>; interrupts = <0 IRQ_TYPE_EDGE_FALLING>; - probe-reset; + semtech,probe-reset; gpio-controller; interrupt-controller; @@ -232,7 +195,7 @@ #size-cells = <0>; reg = <6>; - gpioext2: gpio@70 { + gpioext2: pinctrl@70 { /* GPIO Expander 2 Mapping : * - 0: USB_HUB_INTn * - 1: HUB_CONNECT @@ -258,7 +221,7 @@ interrupt-parent = <&gpioext1>; interrupts = <14 IRQ_TYPE_EDGE_FALLING>; - probe-reset; + semtech,probe-reset; gpio-controller; interrupt-controller; diff --git a/arch/arm/boot/dts/qcom-mdm9615-wp8548.dtsi b/arch/arm/boot/dts/qcom-mdm9615-wp8548.dtsi index 49de1821ac3a..92c8003dac25 100644 --- a/arch/arm/boot/dts/qcom-mdm9615-wp8548.dtsi +++ b/arch/arm/boot/dts/qcom-mdm9615-wp8548.dtsi @@ -1,46 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT /* * Device Tree Source for Sierra Wireless WP8548 Module * * Copyright (C) 2016 BayLibre, SAS. * Author : Neil Armstrong <narmstrong@baylibre.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include "qcom-mdm9615.dtsi" @@ -59,8 +22,8 @@ pinctrl-0 = <&reset_out_pins>; pinctrl-names = "default"; - gsbi3_pins: gsbi3_pins { - mux { + gsbi3_pins: gsbi3-state { + gsbi3-pins { pins = "gpio8", "gpio9", "gpio10", "gpio11"; function = "gsbi3"; drive-strength = <8>; @@ -68,8 +31,8 @@ }; }; - gsbi4_pins: gsbi4_pins { - mux { + gsbi4_pins: gsbi4-state { + gsbi4-pins { pins = "gpio12", "gpio13", "gpio14", "gpio15"; function = "gsbi4"; drive-strength = <8>; @@ -77,15 +40,15 @@ }; }; - gsbi5_i2c_pins: gsbi5_i2c_pins { - pin16 { + gsbi5_i2c_pins: gsbi5-i2c-state { + sda-pins { pins = "gpio16"; function = "gsbi5_i2c"; drive-strength = <8>; bias-disable; }; - pin17 { + scl-pins { pins = "gpio17"; function = "gsbi5_i2c"; drive-strength = <2>; @@ -93,8 +56,8 @@ }; }; - gsbi5_uart_pins: gsbi5_uart_pins { - mux { + gsbi5_uart_pins: gsbi5-uart-state { + gsbi5-uart-pins { pins = "gpio18", "gpio19"; function = "gsbi5_uart"; drive-strength = <8>; @@ -102,8 +65,8 @@ }; }; - reset_out_pins: reset_out_pins { - pins { + reset_out_pins: reset-out-state { + reset-out-pins { pins = "gpio66"; function = "gpio"; drive-strength = <2>; diff --git a/arch/arm/boot/dts/qcom-mdm9615.dtsi b/arch/arm/boot/dts/qcom-mdm9615.dtsi index b47c86412de2..b0fe1d95d88f 100644 --- a/arch/arm/boot/dts/qcom-mdm9615.dtsi +++ b/arch/arm/boot/dts/qcom-mdm9615.dtsi @@ -1,46 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT /* * Device Tree Source for Qualcomm MDM9615 SoC * * Copyright (C) 2016 BayLibre, SAS. * Author : Neil Armstrong <narmstrong@baylibre.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; @@ -64,6 +27,7 @@ cpu0: cpu@0 { compatible = "arm,cortex-a5"; + reg = <0>; device_type = "cpu"; next-level-cache = <&L2>; }; @@ -206,7 +170,6 @@ #size-cells = <0>; reg = <0x16280000 0x1000>; interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>; - spi-max-frequency = <24000000>; clocks = <&gcc GSBI3_QUP_CLK>, <&gcc GSBI3_H_CLK>; clock-names = "core", "iface"; @@ -283,7 +246,7 @@ reg = <0x500000 0x1000>; qcom,controller-type = "pmic-arbiter"; - pmicintc: pmic@0 { + pmicintc: pmic { compatible = "qcom,pm8018", "qcom,pm8921"; interrupts = <GIC_PPI 226 IRQ_TYPE_LEVEL_HIGH>; #interrupt-cells = <2>; @@ -351,51 +314,43 @@ qcom,ee = <0>; }; - amba { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - sdcc1: mmc@12180000 { - status = "disabled"; - compatible = "arm,pl18x", "arm,primecell"; - arm,primecell-periphid = <0x00051180>; - reg = <0x12180000 0x2000>; - interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "cmd_irq"; - clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>; - clock-names = "mclk", "apb_pclk"; - bus-width = <8>; - max-frequency = <48000000>; - cap-sd-highspeed; - cap-mmc-highspeed; - vmmc-supply = <&vsdcc_fixed>; - dmas = <&sdcc1bam 2>, <&sdcc1bam 1>; - dma-names = "tx", "rx"; - assigned-clocks = <&gcc SDC1_CLK>; - assigned-clock-rates = <400000>; - }; + sdcc1: mmc@12180000 { + status = "disabled"; + compatible = "arm,pl18x", "arm,primecell"; + arm,primecell-periphid = <0x00051180>; + reg = <0x12180000 0x2000>; + interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>; + clock-names = "mclk", "apb_pclk"; + bus-width = <8>; + max-frequency = <48000000>; + cap-sd-highspeed; + cap-mmc-highspeed; + vmmc-supply = <&vsdcc_fixed>; + dmas = <&sdcc1bam 2>, <&sdcc1bam 1>; + dma-names = "tx", "rx"; + assigned-clocks = <&gcc SDC1_CLK>; + assigned-clock-rates = <400000>; + }; - sdcc2: mmc@12140000 { - compatible = "arm,pl18x", "arm,primecell"; - arm,primecell-periphid = <0x00051180>; - status = "disabled"; - reg = <0x12140000 0x2000>; - interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "cmd_irq"; - clocks = <&gcc SDC2_CLK>, <&gcc SDC2_H_CLK>; - clock-names = "mclk", "apb_pclk"; - bus-width = <4>; - cap-sd-highspeed; - cap-mmc-highspeed; - max-frequency = <48000000>; - no-1-8-v; - vmmc-supply = <&vsdcc_fixed>; - dmas = <&sdcc2bam 2>, <&sdcc2bam 1>; - dma-names = "tx", "rx"; - assigned-clocks = <&gcc SDC2_CLK>; - assigned-clock-rates = <400000>; - }; + sdcc2: mmc@12140000 { + compatible = "arm,pl18x", "arm,primecell"; + arm,primecell-periphid = <0x00051180>; + status = "disabled"; + reg = <0x12140000 0x2000>; + interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc SDC2_CLK>, <&gcc SDC2_H_CLK>; + clock-names = "mclk", "apb_pclk"; + bus-width = <4>; + cap-sd-highspeed; + cap-mmc-highspeed; + max-frequency = <48000000>; + no-1-8-v; + vmmc-supply = <&vsdcc_fixed>; + dmas = <&sdcc2bam 2>, <&sdcc2bam 1>; + dma-names = "tx", "rx"; + assigned-clocks = <&gcc SDC2_CLK>; + assigned-clock-rates = <400000>; }; tcsr: syscon@1a400000 { diff --git a/arch/arm/boot/dts/qcom-msm8226-samsung-s3ve3g.dts b/arch/arm/boot/dts/qcom-msm8226-samsung-s3ve3g.dts index 290e1df631f0..6a082ad4418a 100644 --- a/arch/arm/boot/dts/qcom-msm8226-samsung-s3ve3g.dts +++ b/arch/arm/boot/dts/qcom-msm8226-samsung-s3ve3g.dts @@ -8,6 +8,7 @@ / { model = "Samsung Galaxy S III Neo"; compatible = "samsung,s3ve3g", "qcom,msm8226"; + chassis-type = "handset"; aliases { serial0 = &blsp1_uart3; diff --git a/arch/arm/boot/dts/qcom-msm8226.dtsi b/arch/arm/boot/dts/qcom-msm8226.dtsi index cf2d56929428..4cba25dad8d6 100644 --- a/arch/arm/boot/dts/qcom-msm8226.dtsi +++ b/arch/arm/boot/dts/qcom-msm8226.dtsi @@ -7,6 +7,7 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/qcom,gcc-msm8974.h> +#include <dt-bindings/clock/qcom,mmcc-msm8974.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/power/qcom-rpmpd.h> #include <dt-bindings/reset/qcom,gcc-msm8974.h> @@ -298,6 +299,33 @@ #size-cells = <0>; }; + cci: cci@fda0c000 { + compatible = "qcom,msm8226-cci"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0xfda0c000 0x1000>; + interrupts = <GIC_SPI 50 IRQ_TYPE_EDGE_RISING>; + clocks = <&mmcc CAMSS_TOP_AHB_CLK>, + <&mmcc CAMSS_CCI_CCI_AHB_CLK>, + <&mmcc CAMSS_CCI_CCI_CLK>; + clock-names = "camss_top_ahb", + "cci_ahb", + "cci"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&cci_default>; + pinctrl-1 = <&cci_sleep>; + + status = "disabled"; + + cci_i2c0: i2c-bus@0 { + reg = <0>; + clock-frequency = <400000>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + usb: usb@f9a55000 { compatible = "qcom,ci-hdrc"; reg = <0xf9a55000 0x200>, @@ -344,6 +372,14 @@ #power-domain-cells = <1>; }; + mmcc: clock-controller@fd8c0000 { + compatible = "qcom,mmcc-msm8226"; + reg = <0xfd8c0000 0x6000>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + tlmm: pinctrl@fd510000 { compatible = "qcom,msm8226-pinctrl"; reg = <0xfd510000 0x4000>; @@ -354,49 +390,65 @@ #interrupt-cells = <2>; interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; - blsp1_i2c1_pins: blsp1-i2c1 { + blsp1_i2c1_pins: blsp1-i2c1-state { pins = "gpio2", "gpio3"; function = "blsp_i2c1"; drive-strength = <2>; bias-disable; }; - blsp1_i2c2_pins: blsp1-i2c2 { + blsp1_i2c2_pins: blsp1-i2c2-state { pins = "gpio6", "gpio7"; function = "blsp_i2c2"; drive-strength = <2>; bias-disable; }; - blsp1_i2c3_pins: blsp1-i2c3 { + blsp1_i2c3_pins: blsp1-i2c3-state { pins = "gpio10", "gpio11"; function = "blsp_i2c3"; drive-strength = <2>; bias-disable; }; - blsp1_i2c4_pins: blsp1-i2c4 { + blsp1_i2c4_pins: blsp1-i2c4-state { pins = "gpio14", "gpio15"; function = "blsp_i2c4"; drive-strength = <2>; bias-disable; }; - blsp1_i2c5_pins: blsp1-i2c5 { + blsp1_i2c5_pins: blsp1-i2c5-state { pins = "gpio18", "gpio19"; function = "blsp_i2c5"; drive-strength = <2>; bias-disable; }; + cci_default: cci-default-state { + pins = "gpio29", "gpio30"; + function = "cci_i2c0"; + + drive-strength = <2>; + bias-disable; + }; + + cci_sleep: cci-sleep-state { + pins = "gpio29", "gpio30"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + sdhc1_default_state: sdhc1-default-state { - clk { + clk-pins { pins = "sdc1_clk"; drive-strength = <10>; bias-disable; }; - cmd-data { + cmd-data-pins { pins = "sdc1_cmd", "sdc1_data"; drive-strength = <10>; bias-pull-up; @@ -404,13 +456,13 @@ }; sdhc2_default_state: sdhc2-default-state { - clk { + clk-pins { pins = "sdc2_clk"; drive-strength = <10>; bias-disable; }; - cmd-data { + cmd-data-pins { pins = "sdc2_cmd", "sdc2_data"; drive-strength = <10>; bias-pull-up; @@ -418,21 +470,21 @@ }; sdhc3_default_state: sdhc3-default-state { - clk { + clk-pins { pins = "gpio44"; function = "sdc3"; drive-strength = <8>; bias-disable; }; - cmd { + cmd-pins { pins = "gpio43"; function = "sdc3"; drive-strength = <8>; bias-pull-up; }; - data { + data-pins { pins = "gpio39", "gpio40", "gpio41", "gpio42"; function = "sdc3"; drive-strength = <8>; @@ -527,7 +579,7 @@ }; }; - rpm_msg_ram: memory@fc428000 { + rpm_msg_ram: sram@fc428000 { compatible = "qcom,rpm-msg-ram"; reg = <0xfc428000 0x4000>; }; diff --git a/arch/arm/boot/dts/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom-msm8660.dtsi index ddce7d64ba99..86f76d0feff4 100644 --- a/arch/arm/boot/dts/qcom-msm8660.dtsi +++ b/arch/arm/boot/dts/qcom-msm8660.dtsi @@ -316,7 +316,7 @@ }; }; - external-bus@1a100000 { + ebi2: external-bus@1a100000 { compatible = "qcom,msm8660-ebi2"; #address-cells = <2>; #size-cells = <1>; @@ -333,12 +333,12 @@ status = "disabled"; }; - qcom,ssbi@500000 { + ssbi@500000 { compatible = "qcom,ssbi"; reg = <0x500000 0x1000>; qcom,controller-type = "pmic-arbiter"; - pm8058: pmic@0 { + pm8058: pmic { compatible = "qcom,pm8058"; interrupt-parent = <&tlmm>; interrupts = <88 8>; @@ -379,7 +379,7 @@ pull-up; }; - keypad@148 { + pm8058_keypad: keypad@148 { compatible = "qcom,pm8058-keypad"; reg = <0x148>; interrupt-parent = <&pm8058>; @@ -444,6 +444,31 @@ compatible = "qcom,pm8058-vib"; reg = <0x4a>; }; + + pm8058_led48: led@48 { + compatible = "qcom,pm8058-keypad-led"; + reg = <0x48>; + status = "disabled"; + }; + + pm8058_led131: led@131 { + compatible = "qcom,pm8058-led"; + reg = <0x131>; + status = "disabled"; + }; + + pm8058_led132: led@132 { + compatible = "qcom,pm8058-led"; + reg = <0x132>; + status = "disabled"; + }; + + pm8058_led133: led@133 { + compatible = "qcom,pm8058-led"; + reg = <0x133>; + status = "disabled"; + }; + }; }; @@ -471,7 +496,7 @@ clock-names = "pxo"; }; - pm8901-regulators { + regulators-0 { compatible = "qcom,rpm-pm8901-regulators"; pm8901_l0: l0 {}; @@ -495,7 +520,7 @@ pm8901_mvs: mvs {}; }; - pm8058-regulators { + regulators-1 { compatible = "qcom,rpm-pm8058-regulators"; pm8058_l0: l0 {}; @@ -549,7 +574,6 @@ arm,primecell-periphid = <0x00051180>; reg = <0x12400000 0x8000>; interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "cmd_irq"; clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>; clock-names = "mclk", "apb_pclk"; bus-width = <8>; @@ -565,7 +589,6 @@ arm,primecell-periphid = <0x00051180>; reg = <0x12140000 0x8000>; interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "cmd_irq"; clocks = <&gcc SDC2_CLK>, <&gcc SDC2_H_CLK>; clock-names = "mclk", "apb_pclk"; bus-width = <8>; @@ -580,7 +603,6 @@ status = "disabled"; reg = <0x12180000 0x8000>; interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "cmd_irq"; clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>; clock-names = "mclk", "apb_pclk"; bus-width = <4>; @@ -596,7 +618,6 @@ status = "disabled"; reg = <0x121c0000 0x8000>; interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "cmd_irq"; clocks = <&gcc SDC4_CLK>, <&gcc SDC4_H_CLK>; clock-names = "mclk", "apb_pclk"; bus-width = <4>; @@ -611,7 +632,6 @@ status = "disabled"; reg = <0x12200000 0x8000>; interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "cmd_irq"; clocks = <&gcc SDC5_CLK>, <&gcc SDC5_H_CLK>; clock-names = "mclk", "apb_pclk"; bus-width = <4>; diff --git a/arch/arm/boot/dts/qcom-msm8960-cdp.dts b/arch/arm/boot/dts/qcom-msm8960-cdp.dts index 9157e3c4f48f..8fa2befa629a 100644 --- a/arch/arm/boot/dts/qcom-msm8960-cdp.dts +++ b/arch/arm/boot/dts/qcom-msm8960-cdp.dts @@ -18,7 +18,7 @@ regulators { compatible = "simple-bus"; - ext_l2: gpio-regulator@91 { + ext_l2: gpio-regulator { compatible = "regulator-fixed"; regulator-name = "ext_l2"; gpio = <&msmgpio 91 0>; @@ -42,7 +42,7 @@ compatible = "micrel,ks8851"; reg = <0>; interrupt-parent = <&msmgpio>; - interrupts = <90 8>; + interrupts = <90 IRQ_TYPE_LEVEL_LOW>; spi-max-frequency = <5400000>; vdd-supply = <&ext_l2>; vdd-io-supply = <&pm8921_lvs6>; @@ -60,33 +60,32 @@ }; &msmgpio { - spi1_default: spi1_default { - mux { - pins = "gpio6", "gpio7", "gpio9"; - function = "gsbi1"; - }; - - mosi { + spi1_default: spi1-default-state { + mosi-pins { pins = "gpio6"; + function = "gsbi1"; drive-strength = <12>; bias-disable; }; - miso { + miso-pins { pins = "gpio7"; + function = "gsbi1"; drive-strength = <12>; bias-disable; }; - cs { + cs-pins { pins = "gpio8"; + function = "gsbi1"; drive-strength = <12>; bias-disable; output-low; }; - clk { + clk-pins { pins = "gpio9"; + function = "gsbi1"; drive-strength = <12>; bias-disable; }; diff --git a/arch/arm/boot/dts/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom-msm8960.dtsi index c5740da3754c..7debf9db7cb1 100644 --- a/arch/arm/boot/dts/qcom-msm8960.dtsi +++ b/arch/arm/boot/dts/qcom-msm8960.dtsi @@ -17,7 +17,7 @@ cpus { #address-cells = <1>; #size-cells = <0>; - interrupts = <1 14 0x304>; + interrupts = <GIC_PPI 14 0x304>; cpu@0 { compatible = "qcom,krait"; @@ -52,7 +52,7 @@ cpu-pmu { compatible = "qcom,krait-pmu"; - interrupts = <1 10 0x304>; + interrupts = <GIC_PPI 10 0x304>; qcom,no-pc-write; }; @@ -105,9 +105,9 @@ timer@200a000 { compatible = "qcom,kpss-timer", "qcom,kpss-wdt-msm8960", "qcom,msm-timer"; - interrupts = <1 1 0x301>, - <1 2 0x301>, - <1 3 0x301>; + interrupts = <GIC_PPI 1 0x301>, + <GIC_PPI 2 0x301>, + <GIC_PPI 3 0x301>; reg = <0x0200a000 0x100>; clock-frequency = <27000000>, <32768>; @@ -119,7 +119,7 @@ gpio-controller; gpio-ranges = <&msmgpio 0 0 152>; #gpio-cells = <2>; - interrupts = <0 16 0x4>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; #interrupt-cells = <2>; reg = <0x800000 0x4000>; @@ -247,15 +247,15 @@ }; }; - qcom,ssbi@500000 { + ssbi@500000 { compatible = "qcom,ssbi"; reg = <0x500000 0x1000>; qcom,controller-type = "pmic-arbiter"; - pmicintc: pmic@0 { + pmicintc: pmic { compatible = "qcom,pm8921"; interrupt-parent = <&msmgpio>; - interrupts = <104 8>; + interrupts = <104 IRQ_TYPE_LEVEL_LOW>; #interrupt-cells = <2>; interrupt-controller; #address-cells = <1>; @@ -265,7 +265,8 @@ compatible = "qcom,pm8921-pwrkey"; reg = <0x1c>; interrupt-parent = <&pmicintc>; - interrupts = <50 1>, <51 1>; + interrupts = <50 IRQ_TYPE_EDGE_RISING>, + <51 IRQ_TYPE_EDGE_RISING>; debounce = <15625>; pull-up; }; @@ -274,7 +275,8 @@ compatible = "qcom,pm8921-keypad"; reg = <0x148>; interrupt-parent = <&pmicintc>; - interrupts = <74 1>, <75 1>; + interrupts = <74 IRQ_TYPE_EDGE_RISING>, + <75 IRQ_TYPE_EDGE_RISING>; debounce = <15>; scan-delay = <32>; row-hold = <91500>; @@ -283,7 +285,7 @@ rtc@11d { compatible = "qcom,pm8921-rtc"; interrupt-parent = <&pmicintc>; - interrupts = <39 1>; + interrupts = <39 IRQ_TYPE_EDGE_RISING>; reg = <0x11d>; allow-set-time; }; @@ -297,44 +299,36 @@ clock-names = "core"; }; - amba { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - sdcc1: mmc@12400000 { - status = "disabled"; - compatible = "arm,pl18x", "arm,primecell"; - arm,primecell-periphid = <0x00051180>; - reg = <0x12400000 0x8000>; - interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "cmd_irq"; - clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>; - clock-names = "mclk", "apb_pclk"; - bus-width = <8>; - max-frequency = <96000000>; - non-removable; - cap-sd-highspeed; - cap-mmc-highspeed; - vmmc-supply = <&vsdcc_fixed>; - }; + sdcc3: mmc@12180000 { + compatible = "arm,pl18x", "arm,primecell"; + arm,primecell-periphid = <0x00051180>; + status = "disabled"; + reg = <0x12180000 0x8000>; + interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>; + clock-names = "mclk", "apb_pclk"; + bus-width = <4>; + cap-sd-highspeed; + cap-mmc-highspeed; + max-frequency = <192000000>; + no-1-8-v; + vmmc-supply = <&vsdcc_fixed>; + }; - sdcc3: mmc@12180000 { - compatible = "arm,pl18x", "arm,primecell"; - arm,primecell-periphid = <0x00051180>; - status = "disabled"; - reg = <0x12180000 0x8000>; - interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "cmd_irq"; - clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>; - clock-names = "mclk", "apb_pclk"; - bus-width = <4>; - cap-sd-highspeed; - cap-mmc-highspeed; - max-frequency = <192000000>; - no-1-8-v; - vmmc-supply = <&vsdcc_fixed>; - }; + sdcc1: mmc@12400000 { + status = "disabled"; + compatible = "arm,pl18x", "arm,primecell"; + arm,primecell-periphid = <0x00051180>; + reg = <0x12400000 0x8000>; + interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>; + clock-names = "mclk", "apb_pclk"; + bus-width = <8>; + max-frequency = <96000000>; + non-removable; + cap-sd-highspeed; + cap-mmc-highspeed; + vmmc-supply = <&vsdcc_fixed>; }; tcsr: syscon@1a400000 { diff --git a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts index 6daceaa87802..280e63e3ebf2 100644 --- a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts +++ b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts @@ -9,6 +9,7 @@ / { model = "LGE MSM 8974 HAMMERHEAD"; compatible = "lge,hammerhead", "qcom,msm8974"; + chassis-type = "handset"; aliases { serial0 = &blsp1_uart1; @@ -247,31 +248,6 @@ status = "okay"; }; -&otg { - status = "okay"; - - phys = <&usb_hs1_phy>; - phy-select = <&tcsr 0xb000 0>; - - extcon = <&charger>, <&usb_id>; - vbus-supply = <&usb_otg_vbus>; - - hnp-disable; - srp-disable; - adp-disable; - - ulpi { - phy@a { - status = "okay"; - - v1p8-supply = <&pm8941_l6>; - v3p3-supply = <&pm8941_l24>; - - qcom,init-seq = /bits/ 8 <0x1 0x64>; - }; - }; -}; - &pm8941_gpios { gpio_keys_pin_a: gpio-keys-active-state { pins = "gpio2", "gpio3"; @@ -344,7 +320,7 @@ }; &rpm_requests { - pm8841-regulators { + regulators-0 { compatible = "qcom,rpm-pm8841-regulators"; pm8841_s1: s1 { @@ -368,7 +344,7 @@ }; }; - pm8941-regulators { + regulators-1 { compatible = "qcom,rpm-pm8941-regulators"; vdd_l1_l3-supply = <&pm8941_s1>; @@ -573,43 +549,43 @@ }; &tlmm { - sdc1_on: sdc1-on { - clk { + sdc1_on: sdc1-on-state { + clk-pins { pins = "sdc1_clk"; drive-strength = <16>; bias-disable; }; - cmd-data { + cmd-data-pins { pins = "sdc1_cmd", "sdc1_data"; drive-strength = <10>; bias-pull-up; }; }; - sdc2_on: sdc2-on { - clk { + sdc2_on: sdc2-on-state { + clk-pins { pins = "sdc2_clk"; drive-strength = <6>; bias-disable; }; - cmd-data { + cmd-data-pins { pins = "sdc2_cmd", "sdc2_data"; drive-strength = <6>; bias-pull-up; }; }; - mpu6515_pin: mpu6515 { + mpu6515_pin: mpu6515-state { pins = "gpio73"; function = "gpio"; bias-disable; input-enable; }; - touch_pin: touch { - int { + touch_pin: touch-state { + int-pins { pins = "gpio5"; function = "gpio"; @@ -618,7 +594,7 @@ input-enable; }; - reset { + reset-pins { pins = "gpio8"; function = "gpio"; @@ -627,27 +603,50 @@ }; }; - panel_pin: panel { + panel_pin: panel-state { pins = "gpio12"; function = "mdp_vsync"; drive-strength = <2>; bias-disable; }; - bt_pin: bt { - hostwake { + bt_pin: bt-state { + hostwake-pins { pins = "gpio42"; function = "gpio"; }; - devwake { + devwake-pins { pins = "gpio62"; function = "gpio"; }; - shutdown { + shutdown-pins { pins = "gpio41"; function = "gpio"; }; }; }; + +&usb { + status = "okay"; + + phys = <&usb_hs1_phy>; + phy-select = <&tcsr 0xb000 0>; + + extcon = <&charger>, <&usb_id>; + vbus-supply = <&usb_otg_vbus>; + + hnp-disable; + srp-disable; + adp-disable; +}; + +&usb_hs1_phy { + status = "okay"; + + v1p8-supply = <&pm8941_l6>; + v3p3-supply = <&pm8941_l24>; + + qcom,init-seq = /bits/ 8 <0x1 0x64>; +}; diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine-amami.dts b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine-amami.dts index 68d5626bf491..9f2ab5c122d0 100644 --- a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine-amami.dts +++ b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine-amami.dts @@ -4,6 +4,7 @@ / { model = "Sony Xperia Z1 Compact"; compatible = "sony,xperia-amami", "qcom,msm8974"; + chassis-type = "handset"; }; &smbb { diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine-honami.dts b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine-honami.dts index ea6a941d8f8c..9028f17e5c4a 100644 --- a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine-honami.dts +++ b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine-honami.dts @@ -4,4 +4,5 @@ / { model = "Sony Xperia Z1"; compatible = "sony,xperia-honami", "qcom,msm8974"; + chassis-type = "handset"; }; diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine.dtsi b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine.dtsi index 5a70683d9103..1b683690a1ad 100644 --- a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine.dtsi +++ b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine.dtsi @@ -132,31 +132,6 @@ /* sii8334 MHL HDMI bridge */ }; -&otg { - status = "okay"; - - phys = <&usb_hs1_phy>; - phy-select = <&tcsr 0xb000 0>; - extcon = <&smbb>, <&usb_id>; - vbus-supply = <&chg_otg>; - - hnp-disable; - srp-disable; - adp-disable; - - ulpi { - phy@a { - status = "okay"; - - v1p8-supply = <&pm8941_l6>; - v3p3-supply = <&pm8941_l24>; - - extcon = <&smbb>; - qcom,init-seq = /bits/ 8 <0x1 0x64>; - }; - }; -}; - &pm8941_coincell { status = "okay"; qcom,rset-ohms = <2100>; @@ -178,7 +153,7 @@ qcom,power-source = <1>; - rgb-led { + multi-led { color = <LED_COLOR_ID_RGB>; function = LED_FUNCTION_STATUS; @@ -214,7 +189,7 @@ }; &rpm_requests { - pm8841-regulators { + regulators-0 { compatible = "qcom,rpm-pm8841-regulators"; pm8841_s1: s1 { @@ -238,7 +213,7 @@ }; }; - pm8941-regulators { + regulators-1 { compatible = "qcom,rpm-pm8941-regulators"; vdd_l1_l3-supply = <&pm8941_s1>; @@ -442,7 +417,7 @@ }; &tlmm { - ts_int_pin: touch-int { + ts_int_pin: touch-int-state { pins = "gpio61"; function = "gpio"; drive-strength = <2>; @@ -450,34 +425,34 @@ input-enable; }; - sdc1_on: sdc1-on { - clk { + sdc1_on: sdc1-on-state { + clk-pins { pins = "sdc1_clk"; drive-strength = <16>; bias-disable; }; - cmd-data { + cmd-data-pins { pins = "sdc1_cmd", "sdc1_data"; drive-strength = <10>; bias-pull-up; }; }; - sdc2_on: sdc-on { - clk { + sdc2_on: sdc-on-state { + clk-pins { pins = "sdc2_clk"; drive-strength = <10>; bias-disable; }; - cmd-data { + cmd-data-pins { pins = "sdc2_cmd", "sdc2_data"; drive-strength = <6>; bias-pull-up; }; - cd { + cd-pins { pins = "gpio62"; function = "gpio"; drive-strength = <2>; @@ -485,3 +460,26 @@ }; }; }; + +&usb { + status = "okay"; + + phys = <&usb_hs1_phy>; + phy-select = <&tcsr 0xb000 0>; + extcon = <&smbb>, <&usb_id>; + vbus-supply = <&chg_otg>; + + hnp-disable; + srp-disable; + adp-disable; +}; + +&usb_hs1_phy { + status = "okay"; + + v1p8-supply = <&pm8941_l6>; + v3p3-supply = <&pm8941_l24>; + + extcon = <&smbb>; + qcom,init-seq = /bits/ 8 <0x1 0x64>; +}; diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi index 7a9be0acf3f5..8d216a3c0851 100644 --- a/arch/arm/boot/dts/qcom-msm8974.dtsi +++ b/arch/arm/boot/dts/qcom-msm8974.dtsi @@ -653,7 +653,7 @@ #size-cells = <0>; }; - otg: usb@f9a55000 { + usb: usb@f9a55000 { compatible = "qcom,ci-hdrc"; reg = <0xf9a55000 0x200>, <0xf9a55200 0x200>; @@ -679,7 +679,7 @@ #phy-cells = <0>; clocks = <&xo_board>, <&gcc GCC_USB2A_PHY_SLEEP_CLK>; clock-names = "ref", "sleep"; - resets = <&gcc GCC_USB2A_PHY_BCR>, <&otg 0>; + resets = <&gcc GCC_USB2A_PHY_BCR>, <&usb 0>; reset-names = "phy", "por"; status = "disabled"; }; @@ -690,7 +690,7 @@ #phy-cells = <0>; clocks = <&xo_board>, <&gcc GCC_USB2B_PHY_SLEEP_CLK>; clock-names = "ref", "sleep"; - resets = <&gcc GCC_USB2B_PHY_BCR>, <&otg 1>; + resets = <&gcc GCC_USB2B_PHY_BCR>, <&usb 1>; reset-names = "phy", "por"; status = "disabled"; }; @@ -1056,7 +1056,7 @@ reg = <0xfc400000 0x4000>; }; - rpm_msg_ram: memory@fc428000 { + rpm_msg_ram: sram@fc428000 { compatible = "qcom,rpm-msg-ram"; reg = <0xfc428000 0x4000>; }; @@ -1116,7 +1116,7 @@ }; tsens: thermal-sensor@fc4a9000 { - compatible = "qcom,msm8974-tsens"; + compatible = "qcom,msm8974-tsens", "qcom,tsens-v0_1"; reg = <0xfc4a9000 0x1000>, /* TM */ <0xfc4a8000 0x1000>; /* SROT */ nvmem-cells = <&tsens_calib>, <&tsens_backup>; @@ -1194,7 +1194,7 @@ resets = <&gcc GCC_MSS_RESTART>; reset-names = "mss_restart"; - qcom,halt-regs = <&tcsr_mutex_block 0x1180 0x1200 0x1280>; + qcom,halt-regs = <&tcsr_mutex 0x1180 0x1200 0x1280>; qcom,smem-states = <&modem_smp2p_out 0>; qcom,smem-state-names = "stop"; @@ -1233,13 +1233,14 @@ }; }; - tcsr_mutex_block: syscon@fd484000 { - compatible = "syscon"; + tcsr_mutex: hwlock@fd484000 { + compatible = "qcom,msm8974-tcsr-mutex", "qcom,tcsr-mutex", "syscon"; reg = <0xfd484000 0x2000>; + #hwlock-cells = <1>; }; tcsr: syscon@fd4a0000 { - compatible = "syscon"; + compatible = "qcom,tcsr-msm8974", "syscon"; reg = <0xfd4a0000 0x10000>; }; @@ -1253,61 +1254,62 @@ #interrupt-cells = <2>; interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; - sdc1_off: sdc1-off { - clk { + sdc1_off: sdc1-off-state { + clk-pins { pins = "sdc1_clk"; bias-disable; drive-strength = <2>; }; - cmd { + cmd-pins { pins = "sdc1_cmd"; bias-pull-up; drive-strength = <2>; }; - data { + data-pins { pins = "sdc1_data"; bias-pull-up; drive-strength = <2>; }; }; - sdc2_off: sdc2-off { - clk { + sdc2_off: sdc2-off-state { + clk-pins { pins = "sdc2_clk"; bias-disable; drive-strength = <2>; }; - cmd { + cmd-pins { pins = "sdc2_cmd"; bias-pull-up; drive-strength = <2>; }; - data { + data-pins { pins = "sdc2_data"; bias-pull-up; drive-strength = <2>; }; - cd { + cd-pins { pins = "gpio54"; + function = "gpio"; bias-disable; drive-strength = <2>; }; }; - blsp1_uart2_default: blsp1-uart2-default { - rx { + blsp1_uart2_default: blsp1-uart2-default-state { + rx-pins { pins = "gpio5"; function = "blsp_uart2"; drive-strength = <2>; bias-pull-up; }; - tx { + tx-pins { pins = "gpio4"; function = "blsp_uart2"; drive-strength = <4>; @@ -1315,15 +1317,15 @@ }; }; - blsp2_uart1_default: blsp2-uart1-default { - tx-rts { + blsp2_uart1_default: blsp2-uart1-default-state { + tx-rts-pins { pins = "gpio41", "gpio44"; function = "blsp_uart7"; drive-strength = <2>; bias-disable; }; - rx-cts { + rx-cts-pins { pins = "gpio42", "gpio43"; function = "blsp_uart7"; drive-strength = <2>; @@ -1331,22 +1333,22 @@ }; }; - blsp2_uart1_sleep: blsp2-uart1-sleep { + blsp2_uart1_sleep: blsp2-uart1-sleep-state { pins = "gpio41", "gpio42", "gpio43", "gpio44"; function = "gpio"; drive-strength = <2>; bias-pull-down; }; - blsp2_uart4_default: blsp2-uart4-default { - tx-rts { + blsp2_uart4_default: blsp2-uart4-default-state { + tx-rts-pins { pins = "gpio53", "gpio56"; function = "blsp_uart10"; drive-strength = <2>; bias-disable; }; - rx-cts { + rx-cts-pins { pins = "gpio54", "gpio55"; function = "blsp_uart10"; drive-strength = <2>; @@ -1354,42 +1356,42 @@ }; }; - blsp1_i2c1_default: blsp1-i2c1-default { + blsp1_i2c1_default: blsp1-i2c1-default-state { pins = "gpio2", "gpio3"; function = "blsp_i2c1"; drive-strength = <2>; bias-disable; }; - blsp1_i2c1_sleep: blsp1-i2c1-sleep { + blsp1_i2c1_sleep: blsp1-i2c1-sleep-state { pins = "gpio2", "gpio3"; function = "blsp_i2c1"; drive-strength = <2>; bias-pull-up; }; - blsp1_i2c2_default: blsp1-i2c2-default { + blsp1_i2c2_default: blsp1-i2c2-default-state { pins = "gpio6", "gpio7"; function = "blsp_i2c2"; drive-strength = <2>; bias-disable; }; - blsp1_i2c2_sleep: blsp1-i2c2-sleep { + blsp1_i2c2_sleep: blsp1-i2c2-sleep-state { pins = "gpio6", "gpio7"; function = "blsp_i2c2"; drive-strength = <2>; bias-pull-up; }; - blsp1_i2c3_default: blsp1-i2c3-default { + blsp1_i2c3_default: blsp1-i2c3-default-state { pins = "gpio10", "gpio11"; function = "blsp_i2c3"; drive-strength = <2>; bias-disable; }; - blsp1_i2c3_sleep: blsp1-i2c3-sleep { + blsp1_i2c3_sleep: blsp1-i2c3-sleep-state { pins = "gpio10", "gpio11"; function = "blsp_i2c3"; drive-strength = <2>; @@ -1400,14 +1402,14 @@ /* BLSP1_I2C5 info is missing */ - blsp1_i2c6_default: blsp1-i2c6-default { + blsp1_i2c6_default: blsp1-i2c6-default-state { pins = "gpio29", "gpio30"; function = "blsp_i2c6"; drive-strength = <2>; bias-disable; }; - blsp1_i2c6_sleep: blsp1-i2c6-sleep { + blsp1_i2c6_sleep: blsp1-i2c6-sleep-state { pins = "gpio29", "gpio30"; function = "blsp_i2c6"; drive-strength = <2>; @@ -1417,14 +1419,14 @@ /* BLSP2_I2C1 info is missing */ - blsp2_i2c2_default: blsp2-i2c2-default { + blsp2_i2c2_default: blsp2-i2c2-default-state { pins = "gpio47", "gpio48"; function = "blsp_i2c8"; drive-strength = <2>; bias-disable; }; - blsp2_i2c2_sleep: blsp2-i2c2-sleep { + blsp2_i2c2_sleep: blsp2-i2c2-sleep-state { pins = "gpio47", "gpio48"; function = "blsp_i2c8"; drive-strength = <2>; @@ -1435,48 +1437,80 @@ /* BLSP2_I2C4 info is missing */ - blsp2_i2c5_default: blsp2-i2c5-default { + blsp2_i2c5_default: blsp2-i2c5-default-state { pins = "gpio83", "gpio84"; function = "blsp_i2c11"; drive-strength = <2>; bias-disable; }; - blsp2_i2c5_sleep: blsp2-i2c5-sleep { + blsp2_i2c5_sleep: blsp2-i2c5-sleep-state { pins = "gpio83", "gpio84"; function = "blsp_i2c11"; drive-strength = <2>; bias-pull-up; }; - blsp2_i2c6_default: blsp2-i2c6-default { + blsp2_i2c6_default: blsp2-i2c6-default-state { pins = "gpio87", "gpio88"; function = "blsp_i2c12"; drive-strength = <2>; bias-disable; }; - blsp2_i2c6_sleep: blsp2-i2c6-sleep { + blsp2_i2c6_sleep: blsp2-i2c6-sleep-state { pins = "gpio87", "gpio88"; function = "blsp_i2c12"; drive-strength = <2>; bias-pull-up; }; - spi8_default: spi8_default { - mosi { + cci_default: cci-default-state { + cci_i2c0_default: cci-i2c0-default-pins { + pins = "gpio19", "gpio20"; + function = "cci_i2c0"; + drive-strength = <2>; + bias-disable; + }; + + cci_i2c1_default: cci-i2c1-default-pins { + pins = "gpio21", "gpio22"; + function = "cci_i2c1"; + drive-strength = <2>; + bias-disable; + }; + }; + + cci_sleep: cci-sleep-state { + cci_i2c0_sleep: cci-i2c0-sleep-pins { + pins = "gpio19", "gpio20"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + cci_i2c1_sleep: cci-i2c1-sleep-pins { + pins = "gpio21", "gpio22"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + }; + + spi8_default: spi8_default-state { + mosi-pins { pins = "gpio45"; function = "blsp_spi8"; }; - miso { + miso-pins { pins = "gpio46"; function = "blsp_spi8"; }; - cs { + cs-pins { pins = "gpio47"; function = "blsp_spi8"; }; - clk { + clk-pins { pins = "gpio48"; function = "blsp_spi8"; }; @@ -1571,7 +1605,6 @@ "core_mmss"; phys = <&dsi0_phy>; - phy-names = "dsi-phy"; status = "disabled"; @@ -1597,7 +1630,7 @@ }; }; - dsi0_phy: dsi-phy@fd922a00 { + dsi0_phy: phy@fd922a00 { compatible = "qcom,dsi-phy-28nm-hpm"; reg = <0xfd922a00 0xd4>, <0xfd922b00 0x280>, @@ -1616,6 +1649,40 @@ }; }; + cci: cci@fda0c000 { + compatible = "qcom,msm8974-cci"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0xfda0c000 0x1000>; + interrupts = <GIC_SPI 50 IRQ_TYPE_EDGE_RISING>; + clocks = <&mmcc CAMSS_TOP_AHB_CLK>, + <&mmcc CAMSS_CCI_CCI_AHB_CLK>, + <&mmcc CAMSS_CCI_CCI_CLK>; + clock-names = "camss_top_ahb", + "cci_ahb", + "cci"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&cci_default>; + pinctrl-1 = <&cci_sleep>; + + status = "disabled"; + + cci_i2c0: i2c-bus@0 { + reg = <0>; + clock-frequency = <100000>; + #address-cells = <1>; + #size-cells = <0>; + }; + + cci_i2c1: i2c-bus@1 { + reg = <1>; + clock-frequency = <100000>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + gpu: adreno@fdb00000 { compatible = "qcom,adreno-330.1", "qcom,adreno"; reg = <0xfdb00000 0x10000>; @@ -1703,8 +1770,6 @@ qcom,ipc = <&apcs 8 8>; qcom,smd-edge = <1>; label = "lpass"; - #address-cells = <1>; - #size-cells = <0>; }; }; @@ -1719,13 +1784,6 @@ }; }; - tcsr_mutex: tcsr-mutex { - compatible = "qcom,tcsr-mutex"; - syscon = <&tcsr_mutex_block 0 0x80>; - - #hwlock-cells = <1>; - }; - thermal-zones { cpu0-thermal { polling-delay-passive = <250>; diff --git a/arch/arm/boot/dts/qcom-msm8974pro-fairphone-fp2.dts b/arch/arm/boot/dts/qcom-msm8974pro-fairphone-fp2.dts index ff6e0066768b..f531d2679f6c 100644 --- a/arch/arm/boot/dts/qcom-msm8974pro-fairphone-fp2.dts +++ b/arch/arm/boot/dts/qcom-msm8974pro-fairphone-fp2.dts @@ -8,7 +8,8 @@ / { model = "Fairphone 2"; - compatible = "fairphone,fp2", "qcom,msm8974"; + compatible = "fairphone,fp2", "qcom,msm8974pro", "qcom,msm8974"; + chassis-type = "handset"; aliases { mmc0 = &sdhc_1; @@ -85,31 +86,6 @@ }; }; -&otg { - status = "okay"; - - phys = <&usb_hs1_phy>; - phy-select = <&tcsr 0xb000 0>; - extcon = <&smbb>, <&usb_id>; - vbus-supply = <&chg_otg>; - - hnp-disable; - srp-disable; - adp-disable; - - ulpi { - phy@a { - status = "okay"; - - v1p8-supply = <&pm8941_l6>; - v3p3-supply = <&pm8941_l24>; - - extcon = <&smbb>; - qcom,init-seq = /bits/ 8 <0x1 0x64>; - }; - }; -}; - &pm8941_gpios { gpio_keys_pin_a: gpio-keys-active-state { pins = "gpio1", "gpio2", "gpio5"; @@ -190,7 +166,7 @@ }; &rpm_requests { - pm8841-regulators { + regulators-0 { compatible = "qcom,rpm-pm8841-regulators"; pm8841_s1: s1 { @@ -209,7 +185,7 @@ }; }; - pm8941-regulators { + regulators-1 { compatible = "qcom,rpm-pm8941-regulators"; vdd_l1_l3-supply = <&pm8941_s1>; @@ -408,36 +384,36 @@ }; &tlmm { - sdc1_on: sdc1-on { - clk { + sdc1_on: sdc1-on-state { + clk-pins { pins = "sdc1_clk"; drive-strength = <16>; bias-disable; }; - cmd-data { + cmd-data-pins { pins = "sdc1_cmd", "sdc1_data"; drive-strength = <10>; bias-pull-up; }; }; - sdc2_on: sdc2-on { - clk { + sdc2_on: sdc2-on-state { + clk-pins { pins = "sdc2_clk"; drive-strength = <10>; bias-disable; }; - cmd-data { + cmd-data-pins { pins = "sdc2_cmd", "sdc2_data"; drive-strength = <6>; bias-pull-up; }; }; - wcnss_pin_a: wcnss-pin-active { - wlan { + wcnss_pin_a: wcnss-pin-active-state { + wlan-pins { pins = "gpio36", "gpio37", "gpio38", "gpio39", "gpio40"; function = "wlan"; @@ -445,7 +421,7 @@ bias-pull-down; }; - bt { + bt-pins { pins = "gpio35", "gpio43", "gpio44"; function = "bt"; @@ -453,7 +429,7 @@ bias-pull-down; }; - fm { + fm-pins { pins = "gpio41", "gpio42"; function = "fm"; @@ -462,3 +438,26 @@ }; }; }; + +&usb { + status = "okay"; + + phys = <&usb_hs1_phy>; + phy-select = <&tcsr 0xb000 0>; + extcon = <&smbb>, <&usb_id>; + vbus-supply = <&chg_otg>; + + hnp-disable; + srp-disable; + adp-disable; +}; + +&usb_hs1_phy { + status = "okay"; + + v1p8-supply = <&pm8941_l6>; + v3p3-supply = <&pm8941_l24>; + + extcon = <&smbb>; + qcom,init-seq = /bits/ 8 <0x1 0x64>; +}; diff --git a/arch/arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts b/arch/arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts new file mode 100644 index 000000000000..b5606623f968 --- /dev/null +++ b/arch/arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts @@ -0,0 +1,417 @@ +// SPDX-License-Identifier: GPL-2.0 +#include "qcom-msm8974pro.dtsi" +#include "qcom-pm8841.dtsi" +#include "qcom-pm8941.dtsi" +#include <dt-bindings/input/input.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> + +/ { + model = "OnePlus One"; + compatible = "oneplus,bacon", "qcom,msm8974pro", "qcom,msm8974"; + chassis-type = "handset"; + qcom,msm-id = <194 0x10000>; + qcom,board-id = <8 0>; + + aliases { + serial0 = &blsp1_uart2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&blsp1_i2c1 { + status = "okay"; + + fuel-gauge@55 { + compatible = "ti,bq27541"; + reg = <0x55>; + power-supplies = <&bq24196_charger>; + }; +}; + +&blsp1_i2c2 { + status = "okay"; + + rmi4-i2c-dev@20 { + compatible = "syna,rmi4-i2c"; + reg = <0x20>; + + syna,startup-delay-ms = <100>; + + interrupts-extended = <&tlmm 61 IRQ_TYPE_EDGE_FALLING>; + vdd-supply = <&pm8941_l22>; + vio-supply = <&pm8941_lvs3>; + + pinctrl-names = "default"; + pinctrl-0 = <&touch_default_state>; + + #address-cells = <1>; + #size-cells = <0>; + + rmi4-f01@1 { + reg = <0x1>; + syna,nosleep-mode = <1>; + }; + + rmi4-f12@12 { + reg = <0x12>; + syna,sensor-type = <1>; + /* + * Touchscreen size is 2040x1080, y-values between + * 1920-2040 are used for touchkey (menu, home & back). + * For now clip it off so we don't get touch events + * outside of the display area. + */ + syna,clip-y-high = <1920>; + }; + }; +}; + +&blsp1_i2c6 { + status = "okay"; + + bq24196_charger: charger@6b { + compatible = "ti,bq24196"; + reg = <0x6b>; + interrupts-extended = <&tlmm 31 IRQ_TYPE_EDGE_FALLING>; + omit-battery-class; + }; +}; + +&blsp1_uart2 { + status = "okay"; +}; + +&gcc { + compatible = "qcom,gcc-msm8974pro-ac"; +}; + +&pm8941_coincell { + qcom,rset-ohms = <800>; + qcom,vset-millivolts = <3200>; + + status = "okay"; +}; + +&pronto { + vddmx-supply = <&pm8841_s1>; + vddcx-supply = <&pm8841_s2>; + vddpx-supply = <&pm8941_s3>; + + pinctrl-names = "default"; + pinctrl-0 = <&wcnss_pin_a>; + + status = "okay"; + + iris { + vddxo-supply = <&pm8941_l6>; + vddrfa-supply = <&pm8941_l11>; + vddpa-supply = <&pm8941_l19>; + vdddig-supply = <&pm8941_s3>; + }; + + smd-edge { + qcom,remote-pid = <4>; + label = "pronto"; + + wcnss { + status = "okay"; + }; + }; +}; + +&remoteproc_adsp { + cx-supply = <&pm8841_s2>; + + status = "okay"; +}; + +&rpm_requests { + regulators-0 { + compatible = "qcom,rpm-pm8841-regulators"; + + pm8841_s1: s1 { + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <1050000>; + }; + + pm8841_s2: s2 { + regulator-min-microvolt = <875000>; + regulator-max-microvolt = <1050000>; + regulator-always-on; + }; + + pm8841_s3: s3 { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + }; + }; + + regulators-1 { + compatible = "qcom,rpm-pm8941-regulators"; + + vdd_l1_l3-supply = <&pm8941_s1>; + vdd_l2_lvs1_2_3-supply = <&pm8941_s3>; + vdd_l4_l11-supply = <&pm8941_s1>; + vdd_l5_l7-supply = <&pm8941_s2>; + vdd_l6_l12_l14_l15-supply = <&pm8941_s2>; + vdd_l8_l16_l18_l19-supply = <&vreg_vph_pwr>; + vdd_l9_l10_l17_l22-supply = <&vreg_boost>; + vdd_l13_l20_l23_l24-supply = <&vreg_boost>; + vdd_l21-supply = <&vreg_boost>; + + pm8941_s1: s1 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + + regulator-always-on; + regulator-boot-on; + }; + + pm8941_s2: s2 { + regulator-min-microvolt = <2150000>; + regulator-max-microvolt = <2150000>; + + regulator-boot-on; + }; + + pm8941_s3: s3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-system-load = <154000>; + + regulator-always-on; + regulator-boot-on; + regulator-allow-set-load; + }; + + pm8941_l1: l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + + regulator-always-on; + regulator-boot-on; + }; + + pm8941_l2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8941_l3: l3 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + pm8941_l4: l4 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + pm8941_l5: l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8941_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-boot-on; + }; + + pm8941_l7: l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-boot-on; + }; + + pm8941_l8: l8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8941_l9: l9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8941_l10: l10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8941_l11: l11 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1350000>; + }; + + pm8941_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-always-on; + regulator-boot-on; + regulator-allow-set-load; + }; + + pm8941_l13: l13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + + regulator-boot-on; + }; + + pm8941_l14: l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8941_l15: l15 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + pm8941_l16: l16 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + + pm8941_l17: l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + pm8941_l18: l18 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + pm8941_l19: l19 { + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <3350000>; + }; + + pm8941_l20: l20 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + + regulator-system-load = <200000>; + regulator-allow-set-load; + regulator-boot-on; + }; + + pm8941_l21: l21 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + + regulator-boot-on; + }; + + pm8941_l22: l22 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-allow-set-load; + }; + + pm8941_l23: l23 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + pm8941_l24: l24 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + + regulator-boot-on; + }; + + pm8941_lvs3: lvs3 {}; + }; +}; + +&sdhc_1 { + vmmc-supply = <&pm8941_l20>; + vqmmc-supply = <&pm8941_s3>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_on>; + pinctrl-1 = <&sdc1_off>; + + status = "okay"; +}; + +&tlmm { + sdc1_on: sdc1-on-state { + clk-pins { + pins = "sdc1_clk"; + drive-strength = <4>; + bias-disable; + }; + + cmd-data-pins { + pins = "sdc1_cmd", "sdc1_data"; + drive-strength = <4>; + bias-pull-up; + }; + }; + + touch_default_state: touch-default-state { + int-pins { + pins = "gpio61"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + input-enable; + }; + + reset-pins { + pins = "gpio60"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + wcnss_pin_a: wcnss-pin-active-state { + wlan-pins { + pins = "gpio36", "gpio37", "gpio38", "gpio39", "gpio40"; + function = "wlan"; + drive-strength = <6>; + bias-pull-down; + }; + + bt-pins { + pins = "gpio35", "gpio43", "gpio44"; + function = "bt"; + drive-strength = <2>; + bias-pull-down; + }; + }; +}; + +&usb { + phys = <&usb_hs1_phy>; + phy-select = <&tcsr 0xb000 0>; + extcon = <&smbb>, <&usb_id>; + vbus-supply = <&chg_otg>; + + hnp-disable; + srp-disable; + adp-disable; + + status = "okay"; +}; + +&usb_hs1_phy { + status = "okay"; + + v1p8-supply = <&pm8941_l6>; + v3p3-supply = <&pm8941_l24>; + + extcon = <&smbb>; + qcom,init-seq = /bits/ 8 <0x1 0x64>; +}; diff --git a/arch/arm/boot/dts/qcom-msm8974pro-samsung-klte.dts b/arch/arm/boot/dts/qcom-msm8974pro-samsung-klte.dts index 983e10c3d863..b9698ffb66ca 100644 --- a/arch/arm/boot/dts/qcom-msm8974pro-samsung-klte.dts +++ b/arch/arm/boot/dts/qcom-msm8974pro-samsung-klte.dts @@ -7,7 +7,8 @@ / { model = "Samsung Galaxy S5"; - compatible = "samsung,klte", "qcom,msm8974"; + compatible = "samsung,klte", "qcom,msm8974pro", "qcom,msm8974"; + chassis-type = "handset"; aliases { serial0 = &blsp1_uart1; @@ -375,28 +376,6 @@ status = "okay"; }; -&otg { - status = "okay"; - - phys = <&usb_hs1_phy>; - phy-select = <&tcsr 0xb000 0>; - - hnp-disable; - srp-disable; - adp-disable; - - ulpi { - phy@a { - status = "okay"; - - v1p8-supply = <&pma8084_l6>; - v3p3-supply = <&pma8084_l24>; - - qcom,init-seq = /bits/ 8 <0x1 0x64>; - }; - }; -}; - &pma8084_gpios { gpio_keys_pin_a: gpio-keys-active-state { pins = "gpio2", "gpio3", "gpio5"; @@ -470,7 +449,7 @@ }; &rpm_requests { - pma8084-regulators { + regulators-0 { compatible = "qcom,rpm-pma8084-regulators"; pma8084_s1: s1 { @@ -706,57 +685,57 @@ &tlmm { /* This seems suspicious, but somebody with this device should look into it. */ - blsp2_uart2_pins_active: blsp2-uart2-pins-active { + blsp2_uart2_pins_active: blsp2-uart2-pins-active-state { pins = "gpio45", "gpio46", "gpio47", "gpio48"; function = "blsp_uart8"; drive-strength = <8>; bias-disable; }; - blsp2_uart2_pins_sleep: blsp2-uart2-pins-sleep { + blsp2_uart2_pins_sleep: blsp2-uart2-pins-sleep-state { pins = "gpio45", "gpio46", "gpio47", "gpio48"; function = "gpio"; drive-strength = <2>; bias-pull-down; }; - bt_pins: bt-pins { - hostwake { + bt_pins: bt-pins-state { + hostwake-pins { pins = "gpio75"; function = "gpio"; drive-strength = <16>; input-enable; }; - devwake { + devwake-pins { pins = "gpio91"; function = "gpio"; drive-strength = <2>; }; }; - sdc1_on: sdhc1-on { - clk { + sdc1_on: sdhc1-on-state { + clk-pins { pins = "sdc1_clk"; drive-strength = <4>; bias-disable; }; - cmd-data { + cmd-data-pins { pins = "sdc1_cmd", "sdc1_data"; drive-strength = <4>; bias-pull-up; }; }; - sdc3_on: sdc3-on { + sdc3_on: sdc3-on-state { pins = "gpio35", "gpio36", "gpio37", "gpio38", "gpio39", "gpio40"; function = "sdc3"; drive-strength = <8>; bias-disable; }; - sdhc3_cd_pin: sdc3-cd-on { + sdhc3_cd_pin: sdc3-cd-on-state { pins = "gpio62"; function = "gpio"; @@ -764,52 +743,72 @@ bias-disable; }; - sdc2_on: sdhc2-on { - clk { + sdc2_on: sdhc2-on-state { + clk-pins { pins = "sdc2_clk"; drive-strength = <6>; bias-disable; }; - cmd-data { + cmd-data-pins { pins = "sdc2_cmd", "sdc2_data"; drive-strength = <6>; bias-pull-up; }; }; - i2c_touchkey_pins: i2c-touchkey { + i2c_touchkey_pins: i2c-touchkey-state { pins = "gpio95", "gpio96"; function = "gpio"; input-enable; bias-pull-up; }; - i2c_led_gpioex_pins: i2c-led-gpioex { + i2c_led_gpioex_pins: i2c-led-gpioex-state { pins = "gpio120", "gpio121"; function = "gpio"; input-enable; bias-pull-down; }; - gpioex_pin: gpioex { + gpioex_pin: gpioex-state { pins = "gpio145"; function = "gpio"; bias-pull-up; drive-strength = <2>; }; - wifi_pin: wifi { + wifi_pin: wifi-state { pins = "gpio92"; function = "gpio"; input-enable; bias-pull-down; }; - panel_te_pin: panel { + panel_te_pin: panel-state { pins = "gpio12"; function = "mdp_vsync"; drive-strength = <2>; bias-disable; }; }; + +&usb { + status = "okay"; + + phys = <&usb_hs1_phy>; + phy-select = <&tcsr 0xb000 0>; + + hnp-disable; + srp-disable; + adp-disable; +}; + +&usb_hs1_phy { + status = "okay"; + + v1p8-supply = <&pma8084_l6>; + v3p3-supply = <&pma8084_l24>; + + qcom,init-seq = /bits/ 8 <0x1 0x64>; +}; diff --git a/arch/arm/boot/dts/qcom-msm8974pro-sony-xperia-shinano-castor.dts b/arch/arm/boot/dts/qcom-msm8974pro-sony-xperia-shinano-castor.dts index 3f45f5c5d37b..3b1cc39f2269 100644 --- a/arch/arm/boot/dts/qcom-msm8974pro-sony-xperia-shinano-castor.dts +++ b/arch/arm/boot/dts/qcom-msm8974pro-sony-xperia-shinano-castor.dts @@ -8,7 +8,8 @@ / { model = "Sony Xperia Z2 Tablet"; - compatible = "sony,xperia-castor", "qcom,msm8974"; + compatible = "sony,xperia-castor", "qcom,msm8974pro", "qcom,msm8974"; + chassis-type = "tablet"; aliases { serial0 = &blsp1_uart2; @@ -212,31 +213,6 @@ }; }; -&otg { - status = "okay"; - - phys = <&usb_hs1_phy>; - phy-select = <&tcsr 0xb000 0>; - extcon = <&smbb>, <&usb_id>; - vbus-supply = <&chg_otg>; - - hnp-disable; - srp-disable; - adp-disable; - - ulpi { - phy@a { - status = "okay"; - - v1p8-supply = <&pm8941_l6>; - v3p3-supply = <&pm8941_l24>; - - extcon = <&smbb>; - qcom,init-seq = /bits/ 8 <0x1 0x64>; - }; - }; -}; - &pm8941_coincell { status = "okay"; @@ -294,7 +270,7 @@ qcom,power-source = <1>; - rgb-led { + multi-led { color = <LED_COLOR_ID_RGB>; function = LED_FUNCTION_STATUS; @@ -319,7 +295,7 @@ }; &rpm_requests { - pm8941-regulators { + regulators-0 { compatible = "qcom,rpm-pm8941-regulators"; vdd_l1_l3-supply = <&pm8941_s1>; @@ -548,41 +524,42 @@ }; &tlmm { - lcd_backlight_en_pin_a: lcd-backlight-vddio { + lcd_backlight_en_pin_a: lcd-backlight-vddio-state { pins = "gpio69"; + function = "gpio"; drive-strength = <10>; output-low; bias-disable; }; - sdc1_on: sdc1-on { - clk { + sdc1_on: sdc1-on-state { + clk-pins { pins = "sdc1_clk"; drive-strength = <16>; bias-disable; }; - cmd-data { + cmd-data-pins { pins = "sdc1_cmd", "sdc1_data"; drive-strength = <10>; bias-pull-up; }; }; - sdc2_on: sdc2-on { - clk { + sdc2_on: sdc2-on-state { + clk-pins { pins = "sdc2_clk"; drive-strength = <6>; bias-disable; }; - cmd-data { + cmd-data-pins { pins = "sdc2_cmd", "sdc2_data"; drive-strength = <6>; bias-pull-up; }; - cd { + cd-pins { pins = "gpio62"; function = "gpio"; drive-strength = <2>; @@ -590,22 +567,22 @@ }; }; - sdc3_on: sdc3-on { - clk { + sdc3_on: sdc3-on-state { + clk-pins { pins = "gpio40"; function = "sdc3"; drive-strength = <10>; bias-disable; }; - cmd { + cmd-pins { pins = "gpio39"; function = "sdc3"; drive-strength = <10>; bias-pull-up; }; - data { + data-pins { pins = "gpio35", "gpio36", "gpio37", "gpio38"; function = "sdc3"; drive-strength = <10>; @@ -613,7 +590,7 @@ }; }; - ts_int_pin: ts-int-pin { + ts_int_pin: ts-int-pin-state { pins = "gpio86"; function = "gpio"; drive-strength = <2>; @@ -621,7 +598,7 @@ input-enable; }; - bt_host_wake_pin: bt-host-wake { + bt_host_wake_pin: bt-host-wake-state { pins = "gpio95"; function = "gpio"; drive-strength = <2>; @@ -629,10 +606,33 @@ output-low; }; - bt_dev_wake_pin: bt-dev-wake { + bt_dev_wake_pin: bt-dev-wake-state { pins = "gpio96"; function = "gpio"; drive-strength = <2>; bias-disable; }; }; + +&usb { + status = "okay"; + + phys = <&usb_hs1_phy>; + phy-select = <&tcsr 0xb000 0>; + extcon = <&smbb>, <&usb_id>; + vbus-supply = <&chg_otg>; + + hnp-disable; + srp-disable; + adp-disable; +}; + +&usb_hs1_phy { + status = "okay"; + + v1p8-supply = <&pm8941_l6>; + v3p3-supply = <&pm8941_l24>; + + extcon = <&smbb>; + qcom,init-seq = /bits/ 8 <0x1 0x64>; +}; diff --git a/arch/arm/boot/dts/qcom-pm8226.dtsi b/arch/arm/boot/dts/qcom-pm8226.dtsi index 9b7d9d04ded6..eb36d3662464 100644 --- a/arch/arm/boot/dts/qcom-pm8226.dtsi +++ b/arch/arm/boot/dts/qcom-pm8226.dtsi @@ -90,6 +90,16 @@ interrupt-controller; #interrupt-cells = <2>; }; + + pm8226_gpios: gpio@c000 { + compatible = "qcom,pm8226-gpio", "qcom,spmi-gpio"; + reg = <0xc000>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pm8226_gpios 0 0 8>; + interrupt-controller; + #interrupt-cells = <2>; + }; }; pm8226_1: pm8226@1 { @@ -98,7 +108,7 @@ #address-cells = <1>; #size-cells = <0>; - pm8226_spmi_regulators: pm8226-regulators { + pm8226_spmi_regulators: regulators { compatible = "qcom,pm8226-regulators"; }; diff --git a/arch/arm/boot/dts/qcom-pm8941.dtsi b/arch/arm/boot/dts/qcom-pm8941.dtsi index 9cd49deb9fa7..cd957a1e7cdf 100644 --- a/arch/arm/boot/dts/qcom-pm8941.dtsi +++ b/arch/arm/boot/dts/qcom-pm8941.dtsi @@ -27,7 +27,7 @@ bias-pull-up; }; - usb_id: misc@900 { + usb_id: usb-detect@900 { compatible = "qcom,pm8941-misc"; reg = <0x900>; interrupts = <0x0 0x9 0 IRQ_TYPE_EDGE_BOTH>; @@ -59,7 +59,7 @@ chg_otg: otg-vbus { }; }; - pm8941_gpios: gpios@c000 { + pm8941_gpios: gpio@c000 { compatible = "qcom,pm8941-gpio", "qcom,spmi-gpio"; reg = <0xc000>; gpio-controller; @@ -101,37 +101,44 @@ #size-cells = <0>; #io-channel-cells = <1>; - bat_temp { - reg = <VADC_LR_MUX1_BAT_THERM>; + + adc-chan@6 { + reg = <VADC_VBAT_SNS>; }; - die_temp { + + adc-chan@8 { reg = <VADC_DIE_TEMP>; }; - ref_625mv { + + adc-chan@9 { reg = <VADC_REF_625MV>; }; - ref_1250v { + + adc-chan@a { reg = <VADC_REF_1250MV>; }; - ref_gnd { + + adc-chan@e { reg = <VADC_GND_REF>; }; - ref_vdd { + + adc-chan@f { reg = <VADC_VDD_VADC>; }; - vbat_sns { - reg = <VADC_VBAT_SNS>; + + adc-chan@30 { + reg = <VADC_LR_MUX1_BAT_THERM>; }; }; - pm8941_iadc: iadc@3600 { + pm8941_iadc: adc@3600 { compatible = "qcom,pm8941-iadc", "qcom,spmi-iadc"; reg = <0x3600>; interrupts = <0x0 0x36 0x0 IRQ_TYPE_EDGE_RISING>; qcom,external-resistor-micro-ohms = <10000>; }; - pm8941_coincell: coincell@2800 { + pm8941_coincell: charger@2800 { compatible = "qcom,pm8941-coincell"; reg = <0x2800>; status = "disabled"; diff --git a/arch/arm/boot/dts/qcom-pma8084.dtsi b/arch/arm/boot/dts/qcom-pma8084.dtsi index e77602e9f95c..2dd4c6aa71c9 100644 --- a/arch/arm/boot/dts/qcom-pma8084.dtsi +++ b/arch/arm/boot/dts/qcom-pma8084.dtsi @@ -27,7 +27,7 @@ bias-pull-up; }; - pma8084_gpios: gpios@c000 { + pma8084_gpios: gpio@c000 { compatible = "qcom,pma8084-gpio", "qcom,spmi-gpio"; reg = <0xc000>; gpio-controller; @@ -64,22 +64,27 @@ #size-cells = <0>; #io-channel-cells = <1>; - die_temp { + adc-chan@8 { reg = <VADC_DIE_TEMP>; }; - ref_625mv { + + adc-chan@9 { reg = <VADC_REF_625MV>; }; - ref_1250v { + + adc-chan@a { reg = <VADC_REF_1250MV>; }; - ref_buf_625mv { + + adc-chan@c { reg = <VADC_SPARE1>; }; - ref_gnd { + + adc-chan@e { reg = <VADC_GND_REF>; }; - ref_vdd { + + adc-chan@f { reg = <VADC_VDD_VADC>; }; }; diff --git a/arch/arm/boot/dts/qcom-pmx65.dtsi b/arch/arm/boot/dts/qcom-pmx65.dtsi index abf229a8b75a..1c7fdf59c1f5 100644 --- a/arch/arm/boot/dts/qcom-pmx65.dtsi +++ b/arch/arm/boot/dts/qcom-pmx65.dtsi @@ -20,7 +20,7 @@ #thermal-sensor-cells = <0>; }; - pmx65_gpios: pinctrl@8800 { + pmx65_gpios: gpio@8800 { compatible = "qcom,pmx65-gpio", "qcom,spmi-gpio"; reg = <0x8800>; gpio-controller; diff --git a/arch/arm/boot/dts/qcom-sdx55-telit-fn980-tlb.dts b/arch/arm/boot/dts/qcom-sdx55-telit-fn980-tlb.dts index a4fa468a095f..ac8b4626ae9a 100644 --- a/arch/arm/boot/dts/qcom-sdx55-telit-fn980-tlb.dts +++ b/arch/arm/boot/dts/qcom-sdx55-telit-fn980-tlb.dts @@ -282,40 +282,25 @@ }; &tlmm { - pcie_ep_clkreq_default: pcie_ep_clkreq_default { - mux { - pins = "gpio56"; - function = "pcie_clkreq"; - }; - config { - pins = "gpio56"; - drive-strength = <2>; - bias-disable; - }; + pcie_ep_clkreq_default: pcie-ep-clkreq-default-state { + pins = "gpio56"; + function = "pcie_clkreq"; + drive-strength = <2>; + bias-disable; }; - pcie_ep_perst_default: pcie_ep_perst_default { - mux { - pins = "gpio57"; - function = "gpio"; - }; - config { - pins = "gpio57"; - drive-strength = <2>; - bias-pull-down; - }; + pcie_ep_perst_default: pcie-ep-perst-default-state { + pins = "gpio57"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; }; - pcie_ep_wake_default: pcie_ep_wake_default { - mux { - pins = "gpio53"; - function = "gpio"; - }; - config { - pins = "gpio53"; - drive-strength = <2>; - bias-disable; - }; + pcie_ep_wake_default: pcie-ep-wake-default-state { + pins = "gpio53"; + function = "gpio"; + drive-strength = <2>; + bias-disable; }; }; diff --git a/arch/arm/boot/dts/qcom-sdx55.dtsi b/arch/arm/boot/dts/qcom-sdx55.dtsi index c72540223fa9..f1c0dab40992 100644 --- a/arch/arm/boot/dts/qcom-sdx55.dtsi +++ b/arch/arm/boot/dts/qcom-sdx55.dtsi @@ -559,6 +559,7 @@ #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; + gpio-ranges = <&tlmm 0 0 109>; }; sram@1468f000 { diff --git a/arch/arm/boot/dts/qcom-sdx65.dtsi b/arch/arm/boot/dts/qcom-sdx65.dtsi index 4cd405db5500..b073e0c63df4 100644 --- a/arch/arm/boot/dts/qcom-sdx65.dtsi +++ b/arch/arm/boot/dts/qcom-sdx65.dtsi @@ -441,8 +441,8 @@ interrupt-controller; }; - imem@1468f000 { - compatible = "simple-mfd"; + sram@1468f000 { + compatible = "qcom,sdx65-imem", "syscon", "simple-mfd"; reg = <0x1468f000 0x1000>; ranges = <0x0 0x1468f000 0x1000>; #address-cells = <1>; diff --git a/arch/arm/boot/dts/r8a7742.dtsi b/arch/arm/boot/dts/r8a7742.dtsi index 758a1bf02fae..73be346001cb 100644 --- a/arch/arm/boot/dts/r8a7742.dtsi +++ b/arch/arm/boot/dts/r8a7742.dtsi @@ -1298,7 +1298,7 @@ dma-names = "rx", "tx", "rxu", "txu"; }; ssi1: ssi-1 { - interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x03>, <&audma1 0x04>, <&audma0 0x49>, <&audma1 0x4a>; dma-names = "rx", "tx", "rxu", "txu"; diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi index db171e3c62f2..111a6d23159e 100644 --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -1252,7 +1252,7 @@ dma-names = "rx", "tx", "rxu", "txu"; }; ssi1: ssi-1 { - interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x03>, <&audma1 0x04>, <&audma0 0x49>, <&audma1 0x4a>; dma-names = "rx", "tx", "rxu", "txu"; diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi index d8f91d9f42ae..777b672b59cc 100644 --- a/arch/arm/boot/dts/r8a7791.dtsi +++ b/arch/arm/boot/dts/r8a7791.dtsi @@ -1365,7 +1365,7 @@ dma-names = "rx", "tx", "rxu", "txu"; }; ssi1: ssi-1 { - interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x03>, <&audma1 0x04>, <&audma0 0x49>, <&audma1 0x4a>; dma-names = "rx", "tx", "rxu", "txu"; diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi index 9ebe7bfaf0ed..3e0be1b58931 100644 --- a/arch/arm/boot/dts/r8a7793.dtsi +++ b/arch/arm/boot/dts/r8a7793.dtsi @@ -1111,7 +1111,7 @@ dma-names = "rx", "tx", "rxu", "txu"; }; ssi1: ssi-1 { - interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x03>, <&audma1 0x04>, <&audma0 0x49>, <&audma1 0x4a>; dma-names = "rx", "tx", "rxu", "txu"; diff --git a/arch/arm/boot/dts/r9a06g032.dtsi b/arch/arm/boot/dts/r9a06g032.dtsi index 563024c9a4ae..41e19c0986ce 100644 --- a/arch/arm/boot/dts/r9a06g032.dtsi +++ b/arch/arm/boot/dts/r9a06g032.dtsi @@ -199,7 +199,7 @@ reg-io-width = <4>; clocks = <&sysctrl R9A06G032_CLK_UART3>, <&sysctrl R9A06G032_HCLK_UART3>; clock-names = "baudclk", "apb_pclk"; - dmas = <&dmamux 0 0 0 0 0 1>, <&dmamux 1 0 0 0 1 1>; + dmas = <&dmamux 0 0 0 0 0 1>, <&dmamux 1 0 0 0 1 1>; dma-names = "rx", "tx"; status = "disabled"; }; @@ -212,7 +212,7 @@ reg-io-width = <4>; clocks = <&sysctrl R9A06G032_CLK_UART4>, <&sysctrl R9A06G032_HCLK_UART4>; clock-names = "baudclk", "apb_pclk"; - dmas = <&dmamux 2 0 0 0 2 1>, <&dmamux 3 0 0 0 3 1>; + dmas = <&dmamux 2 0 0 0 2 1>, <&dmamux 3 0 0 0 3 1>; dma-names = "rx", "tx"; status = "disabled"; }; @@ -225,7 +225,7 @@ reg-io-width = <4>; clocks = <&sysctrl R9A06G032_CLK_UART5>, <&sysctrl R9A06G032_HCLK_UART5>; clock-names = "baudclk", "apb_pclk"; - dmas = <&dmamux 4 0 0 0 4 1>, <&dmamux 5 0 0 0 5 1>; + dmas = <&dmamux 4 0 0 0 4 1>, <&dmamux 5 0 0 0 5 1>; dma-names = "rx", "tx"; status = "disabled"; }; @@ -238,7 +238,7 @@ reg-io-width = <4>; clocks = <&sysctrl R9A06G032_CLK_UART6>, <&sysctrl R9A06G032_HCLK_UART6>; clock-names = "baudclk", "apb_pclk"; - dmas = <&dmamux 6 0 0 0 6 1>, <&dmamux 7 0 0 0 7 1>; + dmas = <&dmamux 6 0 0 0 6 1>, <&dmamux 7 0 0 0 7 1>; dma-names = "rx", "tx"; status = "disabled"; }; @@ -251,7 +251,7 @@ reg-io-width = <4>; clocks = <&sysctrl R9A06G032_CLK_UART7>, <&sysctrl R9A06G032_HCLK_UART7>; clock-names = "baudclk", "apb_pclk"; - dmas = <&dmamux 4 0 0 0 20 1>, <&dmamux 5 0 0 0 21 1>; + dmas = <&dmamux 4 0 0 0 20 1>, <&dmamux 5 0 0 0 21 1>; dma-names = "rx", "tx"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/rk3036-evb.dts b/arch/arm/boot/dts/rk3036-evb.dts index 9fd4d9db9f8f..becdc0b664bf 100644 --- a/arch/arm/boot/dts/rk3036-evb.dts +++ b/arch/arm/boot/dts/rk3036-evb.dts @@ -35,11 +35,10 @@ &i2c1 { status = "okay"; - hym8563: hym8563@51 { + hym8563: rtc@51 { compatible = "haoyu,hym8563"; reg = <0x51>; #clock-cells = <0>; - clock-frequency = <32768>; clock-output-names = "xin32k"; }; }; diff --git a/arch/arm/boot/dts/rk3066a-mk808.dts b/arch/arm/boot/dts/rk3066a-mk808.dts index cfa318a506eb..2db5ba706208 100644 --- a/arch/arm/boot/dts/rk3066a-mk808.dts +++ b/arch/arm/boot/dts/rk3066a-mk808.dts @@ -32,7 +32,7 @@ keyup-threshold-microvolt = <2500000>; poll-interval = <100>; - recovery { + button-recovery { label = "recovery"; linux,code = <KEY_VENDOR>; press-threshold-microvolt = <0>; diff --git a/arch/arm/boot/dts/rk3188-radxarock.dts b/arch/arm/boot/dts/rk3188-radxarock.dts index e7cf18823558..118deacd38c4 100644 --- a/arch/arm/boot/dts/rk3188-radxarock.dts +++ b/arch/arm/boot/dts/rk3188-radxarock.dts @@ -71,7 +71,7 @@ #sound-dai-cells = <0>; }; - ir_recv: gpio-ir-receiver { + ir_recv: ir-receiver { compatible = "gpio-ir-receiver"; gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi index cdd4a0bd5133..44b54af0bbf9 100644 --- a/arch/arm/boot/dts/rk3188.dtsi +++ b/arch/arm/boot/dts/rk3188.dtsi @@ -379,7 +379,7 @@ rockchip,pins = <2 RK_PD3 1 &pcfg_pull_none>; }; - lcdc1_rgb24: ldcd1-rgb24 { + lcdc1_rgb24: lcdc1-rgb24 { rockchip,pins = <2 RK_PA0 1 &pcfg_pull_none>, <2 RK_PA1 1 &pcfg_pull_none>, <2 RK_PA2 1 &pcfg_pull_none>, @@ -607,7 +607,6 @@ &global_timer { interrupts = <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>; - status = "disabled"; }; &local_timer { diff --git a/arch/arm/boot/dts/rk3288-evb-act8846.dts b/arch/arm/boot/dts/rk3288-evb-act8846.dts index be695b8c1f67..8a635c243127 100644 --- a/arch/arm/boot/dts/rk3288-evb-act8846.dts +++ b/arch/arm/boot/dts/rk3288-evb-act8846.dts @@ -54,7 +54,7 @@ vin-supply = <&vcc_sys>; }; - hym8563@51 { + rtc@51 { compatible = "haoyu,hym8563"; reg = <0x51>; diff --git a/arch/arm/boot/dts/rk3288-evb.dtsi b/arch/arm/boot/dts/rk3288-evb.dtsi index 399d6b9c5fd4..382d2839cf47 100644 --- a/arch/arm/boot/dts/rk3288-evb.dtsi +++ b/arch/arm/boot/dts/rk3288-evb.dtsi @@ -28,19 +28,19 @@ press-threshold-microvolt = <300000>; }; - menu { + button-menu { label = "Menu"; linux,code = <KEY_MENU>; press-threshold-microvolt = <640000>; }; - esc { + button-esc { label = "Esc"; linux,code = <KEY_ESC>; press-threshold-microvolt = <1000000>; }; - home { + button-home { label = "Home"; linux,code = <KEY_HOME>; press-threshold-microvolt = <1300000>; diff --git a/arch/arm/boot/dts/rk3288-firefly.dtsi b/arch/arm/boot/dts/rk3288-firefly.dtsi index 052afe5543e2..3836c61cfb76 100644 --- a/arch/arm/boot/dts/rk3288-firefly.dtsi +++ b/arch/arm/boot/dts/rk3288-firefly.dtsi @@ -233,11 +233,10 @@ vin-supply = <&vcc_sys>; }; - hym8563: hym8563@51 { + hym8563: rtc@51 { compatible = "haoyu,hym8563"; reg = <0x51>; #clock-cells = <0>; - clock-frequency = <32768>; clock-output-names = "xin32k"; interrupt-parent = <&gpio7>; interrupts = <RK_PA4 IRQ_TYPE_EDGE_FALLING>; diff --git a/arch/arm/boot/dts/rk3288-miqi.dts b/arch/arm/boot/dts/rk3288-miqi.dts index 713f55e143c6..db1eb648e0e1 100644 --- a/arch/arm/boot/dts/rk3288-miqi.dts +++ b/arch/arm/boot/dts/rk3288-miqi.dts @@ -162,11 +162,10 @@ vin-supply = <&vcc_sys>; }; - hym8563: hym8563@51 { + hym8563: rtc@51 { compatible = "haoyu,hym8563"; reg = <0x51>; #clock-cells = <0>; - clock-frequency = <32768>; clock-output-names = "xin32k"; }; diff --git a/arch/arm/boot/dts/rk3288-rock2-square.dts b/arch/arm/boot/dts/rk3288-rock2-square.dts index 80e0f07c8e87..13cfdaa95cc7 100644 --- a/arch/arm/boot/dts/rk3288-rock2-square.dts +++ b/arch/arm/boot/dts/rk3288-rock2-square.dts @@ -165,11 +165,10 @@ }; &i2c0 { - hym8563: hym8563@51 { + hym8563: rtc@51 { compatible = "haoyu,hym8563"; reg = <0x51>; #clock-cells = <0>; - clock-frequency = <32768>; clock-output-names = "xin32k"; interrupt-parent = <&gpio0>; interrupts = <RK_PA4 IRQ_TYPE_EDGE_FALLING>; diff --git a/arch/arm/boot/dts/rk3288-vmarc-som.dtsi b/arch/arm/boot/dts/rk3288-vmarc-som.dtsi index 0ae2bd150e37..793951655b73 100644 --- a/arch/arm/boot/dts/rk3288-vmarc-som.dtsi +++ b/arch/arm/boot/dts/rk3288-vmarc-som.dtsi @@ -241,7 +241,6 @@ interrupt-parent = <&gpio5>; interrupts = <RK_PC3 IRQ_TYPE_LEVEL_LOW>; #clock-cells = <0>; - clock-frequency = <32768>; clock-output-names = "hym8563"; pinctrl-names = "default"; pinctrl-0 = <&hym8563_int>; diff --git a/arch/arm/boot/dts/rk3xxx.dtsi b/arch/arm/boot/dts/rk3xxx.dtsi index bf285091a9eb..cb4e42ede56a 100644 --- a/arch/arm/boot/dts/rk3xxx.dtsi +++ b/arch/arm/boot/dts/rk3xxx.dtsi @@ -76,6 +76,13 @@ reg = <0x1013c200 0x20>; interrupts = <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>; clocks = <&cru CORE_PERI>; + status = "disabled"; + /* The clock source and the sched_clock provided by the arm_global_timer + * on Rockchip rk3066a/rk3188 are quite unstable because their rates + * depend on the CPU frequency. + * Keep the arm_global_timer disabled in order to have the + * DW_APB_TIMER (rk3066a) or ROCKCHIP_TIMER (rk3188) selected by default. + */ }; local_timer: local-timer@1013c600 { diff --git a/arch/arm/boot/dts/sama7g5-pinfunc.h b/arch/arm/boot/dts/sama7g5-pinfunc.h index 4eb30445d205..a67a156e26ab 100644 --- a/arch/arm/boot/dts/sama7g5-pinfunc.h +++ b/arch/arm/boot/dts/sama7g5-pinfunc.h @@ -261,7 +261,7 @@ #define PIN_PB2__FLEXCOM6_IO0 PINMUX_PIN(PIN_PB2, 2, 1) #define PIN_PB2__ADTRG PINMUX_PIN(PIN_PB2, 3, 1) #define PIN_PB2__A20 PINMUX_PIN(PIN_PB2, 4, 1) -#define PIN_PB2__FLEXCOM11_IO0 PINMUX_PIN(PIN_PB2, 6, 3) +#define PIN_PB2__FLEXCOM11_IO1 PINMUX_PIN(PIN_PB2, 6, 3) #define PIN_PB3 35 #define PIN_PB3__GPIO PINMUX_PIN(PIN_PB3, 0, 0) #define PIN_PB3__RF1 PINMUX_PIN(PIN_PB3, 1, 1) @@ -673,7 +673,7 @@ #define PIN_PD8__GPIO PINMUX_PIN(PIN_PD8, 0, 0) #define PIN_PD8__SDMMC2_DAT3 PINMUX_PIN(PIN_PD8, 1, 1) #define PIN_PD8__I2SMCC0_DIN0 PINMUX_PIN(PIN_PD8, 3, 1) -#define PIN_PD8__A11_NANDCLE PINMUX_PIN(PIN_PD8, 4, 2) +#define PIN_PD8__A22_NANDCLE PINMUX_PIN(PIN_PD8, 4, 2) #define PIN_PD8__TIOA2 PINMUX_PIN(PIN_PD8, 5, 2) #define PIN_PD8__FLEXCOM11_IO0 PINMUX_PIN(PIN_PD8, 6, 5) #define PIN_PD9 105 diff --git a/arch/arm/boot/dts/sama7g5.dtsi b/arch/arm/boot/dts/sama7g5.dtsi index 7bd8ae8e8d38..ab131762ecb5 100644 --- a/arch/arm/boot/dts/sama7g5.dtsi +++ b/arch/arm/boot/dts/sama7g5.dtsi @@ -9,12 +9,15 @@ * */ +#include <dt-bindings/iio/adc/at91-sama5d2_adc.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/at91.h> #include <dt-bindings/dma/at91.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/mfd/at91-usart.h> +#include <dt-bindings/nvmem/microchip,sama7g5-otpc.h> +#include <dt-bindings/thermal/thermal.h> / { model = "Microchip SAMA7G5 family SoC"; @@ -34,6 +37,7 @@ clocks = <&pmc PMC_TYPE_CORE PMC_CPUPLL>; clock-names = "cpu"; operating-points-v2 = <&cpu_opp_table>; + #cooling-cells = <2>; /* min followed by max */ }; }; @@ -72,6 +76,46 @@ }; }; + thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay-passive = <1000>; + polling-delay = <5000>; + thermal-sensors = <&thermal_sensor>; + + trips { + cpu_normal: cpu-alert0 { + temperature = <90000>; + hysteresis = <0>; + type = "passive"; + }; + + cpu_hot: cpu-alert1 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + cpu_critical: cpu-critical { + temperature = <100000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu_normal>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + + map1 { + trip = <&cpu_hot>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + }; + clocks { slow_xtal: slow_xtal { compatible = "fixed-clock"; @@ -108,6 +152,13 @@ ranges; }; + thermal_sensor: thermal-sensor { + compatible = "generic-adc-thermal"; + #thermal-sensor-cells = <0>; + io-channels = <&adc AT91_SAMA7G5_ADC_TEMP_CHANNEL>; + io-channel-names = "sensor-channel"; + }; + soc { compatible = "simple-bus"; #address-cells = <1>; @@ -153,7 +204,7 @@ }; }; - securam: securam@e0000000 { + securam: sram@e0000000 { compatible = "microchip,sama7g5-securam", "atmel,sama5d2-securam", "mmio-sram"; reg = <0xe0000000 0x4000>; clocks = <&pmc PMC_TYPE_PERIPHERAL 18>; @@ -420,6 +471,9 @@ atmel,min-sample-rate-hz = <200000>; atmel,max-sample-rate-hz = <20000000>; atmel,startup-time-ms = <4>; + #io-channel-cells = <1>; + nvmem-cells = <&temperature_calib>; + nvmem-cell-names = "temperature_calib"; status = "disabled"; }; @@ -888,6 +942,17 @@ reg = <0xe3804000 0x1000>; }; + otpc: efuse@e8c00000 { + compatible = "microchip,sama7g5-otpc", "syscon"; + reg = <0xe8c00000 0x100>; + #address-cells = <1>; + #size-cells = <1>; + + temperature_calib: calib@1 { + reg = <OTP_PKT(1) 76>; + }; + }; + gic: interrupt-controller@e8c11000 { compatible = "arm,cortex-a7-gic"; #interrupt-cells = <3>; diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi index 2459f3cd7dd9..6eda6fdc101b 100644 --- a/arch/arm/boot/dts/socfpga.dtsi +++ b/arch/arm/boot/dts/socfpga.dtsi @@ -453,7 +453,6 @@ compatible = "altr,socfpga-gate-clk"; clocks = <&f2s_periph_ref_clk>, <&main_nand_sdmmc_clk>, <&per_nand_mmc_clk>; clk-gate = <0xa0 8>; - clk-phase = <0 135>; }; sdmmc_clk_divided: sdmmc_clk_divided { @@ -755,7 +754,7 @@ reg = <0xff800000 0x1000>; }; - mmc: dwmmc0@ff704000 { + mmc: mmc@ff704000 { compatible = "altr,socfpga-dw-mshc"; reg = <0xff704000 0x1000>; interrupts = <0 139 4>; @@ -765,6 +764,7 @@ clocks = <&l4_mp_clk>, <&sdmmc_clk_divided>; clock-names = "biu", "ciu"; resets = <&rst SDMMC_RESET>; + altr,sysmgr-syscon = <&sysmgr 0x108 3>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/socfpga_arria10.dtsi b/arch/arm/boot/dts/socfpga_arria10.dtsi index 4370e3cbbb4b..3b2a2c9c6547 100644 --- a/arch/arm/boot/dts/socfpga_arria10.dtsi +++ b/arch/arm/boot/dts/socfpga_arria10.dtsi @@ -365,7 +365,6 @@ compatible = "altr,socfpga-a10-gate-clk"; clocks = <&sdmmc_free_clk>; clk-gate = <0xC8 5>; - clk-phase = <0 135>; }; qspi_clk: qspi_clk { @@ -656,7 +655,7 @@ arm,shared-override; }; - mmc: dwmmc0@ff808000 { + mmc: mmc@ff808000 { #address-cells = <1>; #size-cells = <0>; compatible = "altr,socfpga-dw-mshc"; @@ -666,6 +665,7 @@ clocks = <&l4_mp_clk>, <&sdmmc_clk>; clock-names = "biu", "ciu"; resets = <&rst SDMMC_RESET>; + altr,sysmgr-syscon = <&sysmgr 0x28 4>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/socfpga_arria10_mercury_aa1.dtsi b/arch/arm/boot/dts/socfpga_arria10_mercury_aa1.dtsi index ad7cd14de6b6..41f865c8c098 100644 --- a/arch/arm/boot/dts/socfpga_arria10_mercury_aa1.dtsi +++ b/arch/arm/boot/dts/socfpga_arria10_mercury_aa1.dtsi @@ -73,6 +73,7 @@ cap-sd-highspeed; broken-cd; bus-width = <4>; + clk-phase-sd-hs = <0>, <135>; }; &osc1 { diff --git a/arch/arm/boot/dts/socfpga_arria10_socdk_nand.dts b/arch/arm/boot/dts/socfpga_arria10_socdk_nand.dts index 9aa897b79544..a662df319a84 100644 --- a/arch/arm/boot/dts/socfpga_arria10_socdk_nand.dts +++ b/arch/arm/boot/dts/socfpga_arria10_socdk_nand.dts @@ -16,11 +16,11 @@ partition@0 { label = "Boot and fpga data"; - reg = <0x0 0x02000000>; + reg = <0x0 0x02500000>; }; partition@1c00000 { label = "Root Filesystem - JFFS2"; - reg = <0x02000000 0x06000000>; + reg = <0x02500000 0x05500000>; }; }; }; diff --git a/arch/arm/boot/dts/socfpga_arria10_socdk_sdmmc.dts b/arch/arm/boot/dts/socfpga_arria10_socdk_sdmmc.dts index 64dc0799f3d7..d3969367f4b5 100644 --- a/arch/arm/boot/dts/socfpga_arria10_socdk_sdmmc.dts +++ b/arch/arm/boot/dts/socfpga_arria10_socdk_sdmmc.dts @@ -12,6 +12,7 @@ cap-mmc-highspeed; broken-cd; bus-width = <4>; + clk-phase-sd-hs = <0>, <135>; }; &eccmgr { diff --git a/arch/arm/boot/dts/socfpga_arria5.dtsi b/arch/arm/boot/dts/socfpga_arria5.dtsi index 22dbf07afcff..40fecde65c54 100644 --- a/arch/arm/boot/dts/socfpga_arria5.dtsi +++ b/arch/arm/boot/dts/socfpga_arria5.dtsi @@ -18,11 +18,12 @@ }; }; - mmc0: dwmmc0@ff704000 { + mmc0: mmc@ff704000 { broken-cd; bus-width = <4>; cap-mmc-highspeed; cap-sd-highspeed; + clk-phase-sd-hs = <0>, <135>; }; sysmgr@ffd08000 { diff --git a/arch/arm/boot/dts/socfpga_arria5_socdk.dts b/arch/arm/boot/dts/socfpga_arria5_socdk.dts index 7f5458d8fccc..c48385702a85 100644 --- a/arch/arm/boot/dts/socfpga_arria5_socdk.dts +++ b/arch/arm/boot/dts/socfpga_arria5_socdk.dts @@ -29,22 +29,22 @@ leds { compatible = "gpio-leds"; - hps0 { + led-hps0 { label = "hps_led0"; gpios = <&porta 0 1>; }; - hps1 { + led-hps1 { label = "hps_led1"; gpios = <&portb 11 1>; }; - hps2 { + led-hps2 { label = "hps_led2"; gpios = <&porta 17 1>; }; - hps3 { + led-hps3 { label = "hps_led3"; gpios = <&porta 18 1>; }; diff --git a/arch/arm/boot/dts/socfpga_cyclone5.dtsi b/arch/arm/boot/dts/socfpga_cyclone5.dtsi index 319a71e41ea4..305fe207b237 100644 --- a/arch/arm/boot/dts/socfpga_cyclone5.dtsi +++ b/arch/arm/boot/dts/socfpga_cyclone5.dtsi @@ -18,11 +18,12 @@ }; }; - mmc0: dwmmc0@ff704000 { + mmc0: mmc@ff704000 { broken-cd; bus-width = <4>; cap-mmc-highspeed; cap-sd-highspeed; + clk-phase-sd-hs = <0>, <135>; }; sysmgr@ffd08000 { diff --git a/arch/arm/boot/dts/socfpga_cyclone5_de0_nano_soc.dts b/arch/arm/boot/dts/socfpga_cyclone5_de0_nano_soc.dts index c8f051fb2bf6..bedf577cb056 100644 --- a/arch/arm/boot/dts/socfpga_cyclone5_de0_nano_soc.dts +++ b/arch/arm/boot/dts/socfpga_cyclone5_de0_nano_soc.dts @@ -33,7 +33,7 @@ leds { compatible = "gpio-leds"; - hps0 { + led-hps0 { label = "hps_led0"; gpios = <&portb 24 0>; linux,default-trigger = "heartbeat"; diff --git a/arch/arm/boot/dts/socfpga_cyclone5_mcv.dtsi b/arch/arm/boot/dts/socfpga_cyclone5_mcv.dtsi index bd92806ffc12..3b9daddf91cd 100644 --- a/arch/arm/boot/dts/socfpga_cyclone5_mcv.dtsi +++ b/arch/arm/boot/dts/socfpga_cyclone5_mcv.dtsi @@ -18,5 +18,6 @@ &mmc0 { /* On-SoM eMMC */ bus-width = <8>; + clk-phase-sd-hs = <0>, <135>; status = "okay"; }; diff --git a/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts b/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts index b2241205c7a9..c7f5fa0ba0f2 100644 --- a/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts +++ b/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts @@ -29,22 +29,22 @@ leds { compatible = "gpio-leds"; - hps0 { + led-hps0 { label = "hps_led0"; gpios = <&portb 15 1>; }; - hps1 { + led-hps1 { label = "hps_led1"; gpios = <&portb 14 1>; }; - hps2 { + led-hps2 { label = "hps_led2"; gpios = <&portb 13 1>; }; - hps3 { + led-hps3 { label = "hps_led3"; gpios = <&portb 12 1>; }; diff --git a/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts b/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts index f24f17c2f5ee..e0630b0eed03 100644 --- a/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts +++ b/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts @@ -141,7 +141,7 @@ reg = <0x50>; }; - i2cswitch@70 { + i2c-mux@70 { compatible = "nxp,pca9548"; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/socfpga_vt.dts b/arch/arm/boot/dts/socfpga_vt.dts index a77846f73b34..3d0d806888b7 100644 --- a/arch/arm/boot/dts/socfpga_vt.dts +++ b/arch/arm/boot/dts/socfpga_vt.dts @@ -29,7 +29,7 @@ }; }; - dwmmc0@ff704000 { + mmc@ff704000 { broken-cd; bus-width = <4>; cap-mmc-highspeed; diff --git a/arch/arm/boot/dts/spear600.dtsi b/arch/arm/boot/dts/spear600.dtsi index fd41243a0b2c..6b67c0ceaed9 100644 --- a/arch/arm/boot/dts/spear600.dtsi +++ b/arch/arm/boot/dts/spear600.dtsi @@ -47,7 +47,7 @@ compatible = "arm,pl110", "arm,primecell"; reg = <0xfc200000 0x1000>; interrupt-parent = <&vic1>; - interrupts = <12>; + interrupts = <13>; status = "disabled"; }; @@ -207,6 +207,36 @@ interrupts = <6>; status = "disabled"; }; + + ssp1: spi@d0100000 { + compatible = "arm,pl022", "arm,primecell"; + reg = <0xd0100000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <&vic0>; + interrupts = <26>; + status = "disabled"; + }; + + ssp2: spi@d0180000 { + compatible = "arm,pl022", "arm,primecell"; + reg = <0xd0180000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <&vic0>; + interrupts = <27>; + status = "disabled"; + }; + + ssp3: spi@d8180000 { + compatible = "arm,pl022", "arm,primecell"; + reg = <0xd8180000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <&vic1>; + interrupts = <5>; + status = "disabled"; + }; }; }; }; diff --git a/arch/arm/boot/dts/ste-dbx5x0.dtsi b/arch/arm/boot/dts/ste-dbx5x0.dtsi index 9afe8301bd47..a42a4fd69299 100644 --- a/arch/arm/boot/dts/ste-dbx5x0.dtsi +++ b/arch/arm/boot/dts/ste-dbx5x0.dtsi @@ -1149,17 +1149,15 @@ compatible = "stericsson,ux500-cryp"; reg = <0xa03cb000 0x1000>; interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; - - v-ape-supply = <&db8500_vape_reg>; clocks = <&prcc_pclk 6 1>; + power-domains = <&pm_domains DOMAIN_VAPE>; }; hash@a03c2000 { compatible = "stericsson,ux500-hash"; reg = <0xa03c2000 0x1000>; - - v-ape-supply = <&db8500_vape_reg>; clocks = <&prcc_pclk 6 2>; + power-domains = <&pm_domains DOMAIN_VAPE>; }; }; }; diff --git a/arch/arm/boot/dts/ste-href.dtsi b/arch/arm/boot/dts/ste-href.dtsi index fbaa0ce46427..8f1bb78fc1e4 100644 --- a/arch/arm/boot/dts/ste-href.dtsi +++ b/arch/arm/boot/dts/ste-href.dtsi @@ -24,6 +24,14 @@ polling-delay = <0>; polling-delay-passive = <0>; thermal-sensors = <&bat_therm>; + + trips { + battery-crit-hi { + temperature = <70000>; + hysteresis = <2000>; + type = "critical"; + }; + }; }; }; diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts index 1c9094f24893..e2f0cdacba7d 100644 --- a/arch/arm/boot/dts/ste-snowball.dts +++ b/arch/arm/boot/dts/ste-snowball.dts @@ -28,6 +28,14 @@ polling-delay = <0>; polling-delay-passive = <0>; thermal-sensors = <&bat_therm>; + + trips { + battery-crit-hi { + temperature = <70000>; + hysteresis = <2000>; + type = "critical"; + }; + }; }; }; diff --git a/arch/arm/boot/dts/ste-ux500-samsung-codina-tmo.dts b/arch/arm/boot/dts/ste-ux500-samsung-codina-tmo.dts index d6940e0afa86..e036393d5415 100644 --- a/arch/arm/boot/dts/ste-ux500-samsung-codina-tmo.dts +++ b/arch/arm/boot/dts/ste-ux500-samsung-codina-tmo.dts @@ -44,6 +44,14 @@ polling-delay = <0>; polling-delay-passive = <0>; thermal-sensors = <&bat_therm>; + + trips { + battery-crit-hi { + temperature = <70000>; + hysteresis = <2000>; + type = "critical"; + }; + }; }; }; @@ -239,7 +247,7 @@ }; }; - spi-gpio-0 { + spi { compatible = "spi-gpio"; /* Clock on GPIO220, pin SCL */ sck-gpios = <&gpio6 28 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm/boot/dts/ste-ux500-samsung-codina.dts b/arch/arm/boot/dts/ste-ux500-samsung-codina.dts index 5f41256d7f4b..1a6d24a7ccb8 100644 --- a/arch/arm/boot/dts/ste-ux500-samsung-codina.dts +++ b/arch/arm/boot/dts/ste-ux500-samsung-codina.dts @@ -57,6 +57,14 @@ polling-delay = <0>; polling-delay-passive = <0>; thermal-sensors = <&bat_therm>; + + trips { + battery-crit-hi { + temperature = <70000>; + hysteresis = <2000>; + type = "critical"; + }; + }; }; }; @@ -325,7 +333,7 @@ }; }; - spi-gpio-0 { + spi { compatible = "spi-gpio"; /* Clock on GPIO220, pin SCL */ sck-gpios = <&gpio6 28 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm/boot/dts/ste-ux500-samsung-gavini.dts b/arch/arm/boot/dts/ste-ux500-samsung-gavini.dts index 806da3fc33cd..5b445fa4c8c0 100644 --- a/arch/arm/boot/dts/ste-ux500-samsung-gavini.dts +++ b/arch/arm/boot/dts/ste-ux500-samsung-gavini.dts @@ -30,6 +30,14 @@ polling-delay = <0>; polling-delay-passive = <0>; thermal-sensors = <&bat_therm>; + + trips { + battery-crit-hi { + temperature = <70000>; + hysteresis = <2000>; + type = "critical"; + }; + }; }; }; @@ -269,7 +277,7 @@ /* * TODO: See if we can use the PL023 for this instead. */ - spi-gpio-0 { + spi { compatible = "spi-gpio"; /* Clock on GPIO220, pin SCL */ sck-gpios = <&gpio6 28 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm/boot/dts/ste-ux500-samsung-golden.dts b/arch/arm/boot/dts/ste-ux500-samsung-golden.dts index b0dce91aff4b..9604695edf53 100644 --- a/arch/arm/boot/dts/ste-ux500-samsung-golden.dts +++ b/arch/arm/boot/dts/ste-ux500-samsung-golden.dts @@ -35,6 +35,14 @@ polling-delay = <0>; polling-delay-passive = <0>; thermal-sensors = <&bat_therm>; + + trips { + battery-crit-hi { + temperature = <70000>; + hysteresis = <2000>; + type = "critical"; + }; + }; }; }; diff --git a/arch/arm/boot/dts/ste-ux500-samsung-janice.dts b/arch/arm/boot/dts/ste-ux500-samsung-janice.dts index ed5c79c3d04b..e901cb76b899 100644 --- a/arch/arm/boot/dts/ste-ux500-samsung-janice.dts +++ b/arch/arm/boot/dts/ste-ux500-samsung-janice.dts @@ -30,6 +30,14 @@ polling-delay = <0>; polling-delay-passive = <0>; thermal-sensors = <&bat_therm>; + + trips { + battery-crit-hi { + temperature = <70000>; + hysteresis = <2000>; + type = "critical"; + }; + }; }; }; @@ -263,7 +271,7 @@ * this derivative is 3wire support, so it cannot be used to drive * this panel interface. We have to use GPIO bit-banging instead. */ - spi-gpio-0 { + spi { compatible = "spi-gpio"; /* Clock on GPIO220 */ sck-gpios = <&gpio6 28 GPIO_ACTIVE_HIGH>; @@ -365,9 +373,13 @@ #address-cells = <1>; #size-cells = <0>; - nfc@30 { - compatible = "nxp,pn547", "nxp,nxp-nci-i2c"; - reg = <0x30>; + /* This is only mounted on the GT-I9070P */ + nfc@2b { /* 0x30? */ + /* NXP NFC circuit PN544 C1 marked NXP 44501 */ + compatible = "nxp,pn544-i2c"; + /* IF0, IF1 high, gives I2C address 0x2B */ + reg = <0x2b>; + clock-frequency = <400000>; /* NFC IRQ on GPIO32 */ interrupt-parent = <&gpio1>; interrupts = <0 IRQ_TYPE_EDGE_FALLING>; @@ -376,7 +388,7 @@ /* GPIO88 */ enable-gpios = <&gpio2 24 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; - pinctrl-0 = <&pn547_janice_default>; + pinctrl-0 = <&pn544_janice_default>; }; }; @@ -951,7 +963,7 @@ }; }; nfc { - pn547_janice_default: pn547_janice { + pn544_janice_default: pn544_janice { /* Interrupt line */ janice_cfg1 { pins = "GPIO32_V2"; diff --git a/arch/arm/boot/dts/ste-ux500-samsung-kyle.dts b/arch/arm/boot/dts/ste-ux500-samsung-kyle.dts index c57676faf181..45fab5283a9d 100644 --- a/arch/arm/boot/dts/ste-ux500-samsung-kyle.dts +++ b/arch/arm/boot/dts/ste-ux500-samsung-kyle.dts @@ -34,6 +34,14 @@ polling-delay = <0>; polling-delay-passive = <0>; thermal-sensors = <&bat_therm>; + + trips { + battery-crit-hi { + temperature = <70000>; + hysteresis = <2000>; + type = "critical"; + }; + }; }; }; @@ -307,6 +315,21 @@ pinctrl-names = "default", "sleep"; pinctrl-0 = <&u1rxtx_a_1_default &u1ctsrts_a_1_default>; pinctrl-1 = <&u1rxtx_a_1_sleep &u1ctsrts_a_1_sleep>; + + gnss { + /* The CSRG05TA03-ICJE-R is a SirfStarV 5t chip */ + compatible = "csr,csrg05ta03-icje-r"; + /* GPS_RSTN on GPIO21 */ + reset-gpios = <&gpio0 21 GPIO_ACTIVE_LOW>; + /* GPS_ON_OFF on GPIO86 */ + sirf,onoff-gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>; + /* GPS_1V8 (VSMPS2) */ + vcc-supply = <&db8500_vsmps2_reg>; + pinctrl-names = "default"; + pinctrl-0 = <&g05ta03_kyle_default>; + /* According to /etc/sirfgps.conf */ + current-speed = <460800>; + }; }; /* Debugging console UART connected to AB8505 USB */ @@ -666,6 +689,20 @@ }; }; }; + g05ta03 { + g05ta03_kyle_default: g05ta03 { + /* Reset line, start out de-asserted */ + kyle_cfg1 { + pins = "GPIO21_AB3"; + ste,config = <&gpio_out_hi>; + }; + /* GPS_ON_OFF, start out deasserted (off) */ + kyle_cfg2 { + pins = "GPIO86_C6"; + ste,config = <&gpio_out_lo>; + }; + }; + }; }; &ab8505_gpio { diff --git a/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts b/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts index 81b341a5ae45..93e5f5ed888d 100644 --- a/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts +++ b/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts @@ -30,6 +30,14 @@ polling-delay = <0>; polling-delay-passive = <0>; thermal-sensors = <&bat_therm>; + + trips { + battery-crit-hi { + temperature = <70000>; + hysteresis = <2000>; + type = "critical"; + }; + }; }; }; diff --git a/arch/arm/boot/dts/stih410-b2260.dts b/arch/arm/boot/dts/stih410-b2260.dts index 26d93f26f6d0..240b62040000 100644 --- a/arch/arm/boot/dts/stih410-b2260.dts +++ b/arch/arm/boot/dts/stih410-b2260.dts @@ -27,26 +27,26 @@ leds { compatible = "gpio-leds"; - user_green_1 { + led-user-green-1 { label = "User_green_1"; gpios = <&pio1 3 GPIO_ACTIVE_LOW>; linux,default-trigger = "heartbeat"; default-state = "off"; }; - user_green_2 { + led-user-green-2 { label = "User_green_2"; gpios = <&pio4 1 GPIO_ACTIVE_LOW>; default-state = "off"; }; - user_green_3 { + led-user-green-3 { label = "User_green_3"; gpios = <&pio2 1 GPIO_ACTIVE_LOW>; default-state = "off"; }; - user_green_4 { + led-user-green-4 { label = "User_green_4"; gpios = <&pio2 5 GPIO_ACTIVE_LOW>; default-state = "off"; diff --git a/arch/arm/boot/dts/stih418-b2199.dts b/arch/arm/boot/dts/stih418-b2199.dts index d21bcc7c1271..53ac6c2b7b7d 100644 --- a/arch/arm/boot/dts/stih418-b2199.dts +++ b/arch/arm/boot/dts/stih418-b2199.dts @@ -26,12 +26,12 @@ leds { compatible = "gpio-leds"; - red { + led-red { label = "Front Panel LED"; gpios = <&pio4 1 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; }; - green { + led-green { gpios = <&pio1 3 GPIO_ACTIVE_HIGH>; default-state = "off"; }; diff --git a/arch/arm/boot/dts/stih418-b2264.dts b/arch/arm/boot/dts/stih418-b2264.dts index a99604bebf8c..34a518b037ab 100644 --- a/arch/arm/boot/dts/stih418-b2264.dts +++ b/arch/arm/boot/dts/stih418-b2264.dts @@ -76,7 +76,7 @@ soc { leds { compatible = "gpio-leds"; - green { + led-green { gpios = <&pio1 3 GPIO_ACTIVE_HIGH>; default-state = "off"; }; diff --git a/arch/arm/boot/dts/stihxxx-b2120.dtsi b/arch/arm/boot/dts/stihxxx-b2120.dtsi index 2aa94605d3d4..920a0bad7494 100644 --- a/arch/arm/boot/dts/stihxxx-b2120.dtsi +++ b/arch/arm/boot/dts/stihxxx-b2120.dtsi @@ -9,12 +9,12 @@ / { leds { compatible = "gpio-leds"; - red { + led-red { label = "Front Panel LED"; gpios = <&pio4 1 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; }; - green { + led-green { gpios = <&pio1 3 GPIO_ACTIVE_HIGH>; default-state = "off"; }; diff --git a/arch/arm/boot/dts/stm32h743.dtsi b/arch/arm/boot/dts/stm32h743.dtsi index 2059593da21d..28e3deb20e1e 100644 --- a/arch/arm/boot/dts/stm32h743.dtsi +++ b/arch/arm/boot/dts/stm32h743.dtsi @@ -375,7 +375,6 @@ arm,primecell-periphid = <0x10153180>; reg = <0x52007000 0x1000>; interrupts = <49>; - interrupt-names = "cmd_irq"; clocks = <&rcc SDMMC1_CK>; clock-names = "apb_pclk"; resets = <&rcc STM32H7_AHB3_RESET(SDMMC1)>; @@ -389,7 +388,6 @@ arm,primecell-periphid = <0x10153180>; reg = <0x48022400 0x400>; interrupts = <124>; - interrupt-names = "cmd_irq"; clocks = <&rcc SDMMC2_CK>; clock-names = "apb_pclk"; resets = <&rcc STM32H7_AHB2_RESET(SDMMC2)>; diff --git a/arch/arm/boot/dts/stm32mp13-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp13-pinctrl.dtsi index efdd163eba30..d377d4c0bef5 100644 --- a/arch/arm/boot/dts/stm32mp13-pinctrl.dtsi +++ b/arch/arm/boot/dts/stm32mp13-pinctrl.dtsi @@ -6,6 +6,13 @@ #include <dt-bindings/pinctrl/stm32-pinfunc.h> &pinctrl { + adc1_usb_cc_pins_a: adc1-usb-cc-pins-0 { + pins { + pinmux = <STM32_PINMUX('F', 12, ANALOG)>, /* ADC1 in6 */ + <STM32_PINMUX('A', 3, ANALOG)>; /* ADC1 in12 */ + }; + }; + i2c1_pins_a: i2c1-0 { pins { pinmux = <STM32_PINMUX('D', 12, AF5)>, /* I2C1_SCL */ @@ -40,6 +47,13 @@ }; }; + mcp23017_pins_a: mcp23017-0 { + pins { + pinmux = <STM32_PINMUX('G', 12, GPIO)>; + bias-pull-up; + }; + }; + sdmmc1_b4_pins_a: sdmmc1-b4-0 { pins { pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */ @@ -165,6 +179,13 @@ }; }; + stm32g0_intn_pins_a: stm32g0-intn-0 { + pins { + pinmux = <STM32_PINMUX('I', 2, GPIO)>; + bias-pull-up; + }; + }; + uart4_pins_a: uart4-0 { pins1 { pinmux = <STM32_PINMUX('D', 6, AF8)>; /* UART4_TX */ diff --git a/arch/arm/boot/dts/stm32mp131.dtsi b/arch/arm/boot/dts/stm32mp131.dtsi index dd35a607073d..accc3824f7e9 100644 --- a/arch/arm/boot/dts/stm32mp131.dtsi +++ b/arch/arm/boot/dts/stm32mp131.dtsi @@ -77,6 +77,28 @@ always-on; }; + /* PWR 1v1, 1v8 and 3v3 regulators defined as fixed, waiting for SCMI */ + reg11: reg11 { + compatible = "regulator-fixed"; + regulator-name = "reg11"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + }; + + reg18: reg18 { + compatible = "regulator-fixed"; + regulator-name = "reg18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + usb33: usb33 { + compatible = "regulator-fixed"; + regulator-name = "usb33"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + soc { compatible = "simple-bus"; #address-cells = <1>; @@ -231,6 +253,66 @@ dma-channels = <16>; }; + adc_2: adc@48004000 { + compatible = "st,stm32mp13-adc-core"; + reg = <0x48004000 0x400>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc ADC2>, <&rcc ADC2_K>; + clock-names = "bus", "adc"; + interrupt-controller; + #interrupt-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + adc2: adc@0 { + compatible = "st,stm32mp13-adc"; + #io-channel-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0>; + interrupt-parent = <&adc_2>; + interrupts = <0>; + dmas = <&dmamux1 10 0x400 0x80000001>; + dma-names = "rx"; + status = "disabled"; + + channel@13 { + reg = <13>; + label = "vrefint"; + }; + channel@14 { + reg = <14>; + label = "vddcore"; + }; + channel@16 { + reg = <16>; + label = "vddcpu"; + }; + channel@17 { + reg = <17>; + label = "vddq_ddr"; + }; + }; + }; + + usbotg_hs: usb@49000000 { + compatible = "st,stm32mp15-hsotg", "snps,dwc2"; + reg = <0x49000000 0x40000>; + clocks = <&rcc USBO_K>; + clock-names = "otg"; + resets = <&rcc USBO_R>; + reset-names = "dwc2"; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + g-rx-fifo-size = <512>; + g-np-tx-fifo-size = <32>; + g-tx-fifo-size = <256 16 16 16 16 16 16 16>; + dr_mode = "otg"; + otg-rev = <0x200>; + usb33d-supply = <&usb33>; + status = "disabled"; + }; + spi4: spi@4c002000 { compatible = "st,stm32h7-spi"; reg = <0x4c002000 0x400>; @@ -354,7 +436,6 @@ arm,primecell-periphid = <0x20253180>; reg = <0x58005000 0x1000>, <0x58006000 0x1000>; interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "cmd_irq"; clocks = <&rcc SDMMC1_K>; clock-names = "apb_pclk"; resets = <&rcc SDMMC1_R>; @@ -369,7 +450,6 @@ arm,primecell-periphid = <0x20253180>; reg = <0x58007000 0x1000>, <0x58008000 0x1000>; interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "cmd_irq"; clocks = <&rcc SDMMC2_K>; clock-names = "apb_pclk"; resets = <&rcc SDMMC2_R>; @@ -379,6 +459,25 @@ status = "disabled"; }; + usbh_ohci: usb@5800c000 { + compatible = "generic-ohci"; + reg = <0x5800c000 0x1000>; + clocks = <&usbphyc>, <&rcc USBH>; + resets = <&rcc USBH_R>; + interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + usbh_ehci: usb@5800d000 { + compatible = "generic-ehci"; + reg = <0x5800d000 0x1000>; + clocks = <&usbphyc>, <&rcc USBH>; + resets = <&rcc USBH_R>; + interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; + companion = <&usbh_ohci>; + status = "disabled"; + }; + iwdg2: watchdog@5a002000 { compatible = "st,stm32mp1-iwdg"; reg = <0x5a002000 0x400>; @@ -387,6 +486,29 @@ status = "disabled"; }; + usbphyc: usbphyc@5a006000 { + #address-cells = <1>; + #size-cells = <0>; + #clock-cells = <0>; + compatible = "st,stm32mp1-usbphyc"; + reg = <0x5a006000 0x1000>; + clocks = <&rcc USBPHY_K>; + resets = <&rcc USBPHY_R>; + vdda1v1-supply = <®11>; + vdda1v8-supply = <®18>; + status = "disabled"; + + usbphyc_port0: usb-phy@0 { + #phy-cells = <0>; + reg = <0>; + }; + + usbphyc_port1: usb-phy@1 { + #phy-cells = <1>; + reg = <1>; + }; + }; + rtc: rtc@5c004000 { compatible = "st,stm32mp1-rtc"; reg = <0x5c004000 0x400>; diff --git a/arch/arm/boot/dts/stm32mp133.dtsi b/arch/arm/boot/dts/stm32mp133.dtsi index 531c263c9f46..df451c3c2a26 100644 --- a/arch/arm/boot/dts/stm32mp133.dtsi +++ b/arch/arm/boot/dts/stm32mp133.dtsi @@ -33,5 +33,36 @@ bosch,mram-cfg = <0x1400 0 0 32 0 0 2 2>; status = "disabled"; }; + + adc_1: adc@48003000 { + compatible = "st,stm32mp13-adc-core"; + reg = <0x48003000 0x400>; + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc ADC1>, <&rcc ADC1_K>; + clock-names = "bus", "adc"; + interrupt-controller; + #interrupt-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + adc1: adc@0 { + compatible = "st,stm32mp13-adc"; + #io-channel-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0>; + interrupt-parent = <&adc_1>; + interrupts = <0>; + dmas = <&dmamux1 9 0x400 0x80000001>; + dma-names = "rx"; + status = "disabled"; + + channel@18 { + reg = <18>; + label = "vrefint"; + }; + }; + }; }; }; diff --git a/arch/arm/boot/dts/stm32mp135f-dk.dts b/arch/arm/boot/dts/stm32mp135f-dk.dts index de341d17e87d..9ff5a3eaf55b 100644 --- a/arch/arm/boot/dts/stm32mp135f-dk.dts +++ b/arch/arm/boot/dts/stm32mp135f-dk.dts @@ -59,6 +59,22 @@ }; }; + v3v3_sw: v3v3-sw { + compatible = "regulator-fixed"; + regulator-name = "v3v3_sw"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vdd_adc: vdd-adc { + compatible = "regulator-fixed"; + regulator-name = "vdd_adc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + vdd_sd: vdd-sd { compatible = "regulator-fixed"; regulator-name = "vdd_sd"; @@ -66,6 +82,39 @@ regulator-max-microvolt = <2900000>; regulator-always-on; }; + + vdd_usb: vdd-usb { + compatible = "regulator-fixed"; + regulator-name = "vdd_usb"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; +}; + +&adc_1 { + pinctrl-names = "default"; + pinctrl-0 = <&adc1_usb_cc_pins_a>; + vdda-supply = <&vdd_adc>; + vref-supply = <&vdd_adc>; + status = "okay"; + adc1: adc@0 { + status = "okay"; + /* + * Type-C USB_PWR_CC1 & USB_PWR_CC2 on in6 & in12. + * Use at least 5 * RC time, e.g. 5 * (Rp + Rd) * C: + * 5 * (5.1 + 47kOhms) * 5pF => 1.3us. + * Use arbitrary margin here (e.g. 5us). + */ + channel@6 { + reg = <6>; + st,min-sample-time-ns = <5000>; + }; + channel@12 { + reg = <12>; + st,min-sample-time-ns = <5000>; + }; + }; }; &i2c1 { @@ -79,6 +128,42 @@ /* spare dmas for other usage */ /delete-property/dmas; /delete-property/dma-names; + + mcp23017: pinctrl@21 { + compatible = "microchip,mcp23017"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + interrupts = <12 IRQ_TYPE_LEVEL_LOW>; + interrupt-parent = <&gpiog>; + pinctrl-names = "default"; + pinctrl-0 = <&mcp23017_pins_a>; + interrupt-controller; + #interrupt-cells = <2>; + microchip,irq-mirror; + }; + + typec@53 { + compatible = "st,stm32g0-typec"; + reg = <0x53>; + /* Alert pin on PI2 */ + interrupts = <2 IRQ_TYPE_EDGE_FALLING>; + interrupt-parent = <&gpioi>; + /* Internal pull-up on PI2 */ + pinctrl-names = "default"; + pinctrl-0 = <&stm32g0_intn_pins_a>; + firmware-name = "stm32g0-ucsi.mp135f-dk.fw"; + connector { + compatible = "usb-c-connector"; + label = "USB-C"; + + port { + con_usb_c_g0_ep: endpoint { + remote-endpoint = <&usbotg_hs_ep>; + }; + }; + }; + }; }; &i2c5 { @@ -108,7 +193,7 @@ pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_clk_pins_a>; pinctrl-1 = <&sdmmc1_b4_od_pins_a &sdmmc1_clk_pins_a>; pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>; - broken-cd; + cd-gpios = <&gpioh 4 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; disable-wp; st,neg-edge; bus-width = <4>; @@ -128,3 +213,60 @@ pinctrl-0 = <&uart4_pins_a>; status = "okay"; }; + +&usbh_ehci { + phys = <&usbphyc_port0>; + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + /* onboard HUB */ + hub@1 { + compatible = "usb424,2514"; + reg = <1>; + vdd-supply = <&v3v3_sw>; + }; +}; + +&usbotg_hs { + phys = <&usbphyc_port1 0>; + phy-names = "usb2-phy"; + usb-role-switch; + status = "okay"; + port { + usbotg_hs_ep: endpoint { + remote-endpoint = <&con_usb_c_g0_ep>; + }; + }; +}; + +&usbphyc { + status = "okay"; +}; + +&usbphyc_port0 { + phy-supply = <&vdd_usb>; + st,current-boost-microamp = <1000>; + st,decrease-hs-slew-rate; + st,tune-hs-dc-level = <2>; + st,enable-hs-rftime-reduction; + st,trim-hs-current = <11>; + st,trim-hs-impedance = <2>; + st,tune-squelch-level = <1>; + st,enable-hs-rx-gain-eq; + st,no-hs-ftime-ctrl; + st,no-lsfs-sc; +}; + +&usbphyc_port1 { + phy-supply = <&vdd_usb>; + st,current-boost-microamp = <1000>; + st,decrease-hs-slew-rate; + st,tune-hs-dc-level = <2>; + st,enable-hs-rftime-reduction; + st,trim-hs-current = <11>; + st,trim-hs-impedance = <2>; + st,tune-squelch-level = <1>; + st,enable-hs-rx-gain-eq; + st,no-hs-ftime-ctrl; + st,no-lsfs-sc; +}; diff --git a/arch/arm/boot/dts/stm32mp151.dtsi b/arch/arm/boot/dts/stm32mp151.dtsi index e02b3f5d44cb..5491b6c4dec2 100644 --- a/arch/arm/boot/dts/stm32mp151.dtsi +++ b/arch/arm/boot/dts/stm32mp151.dtsi @@ -1118,7 +1118,6 @@ arm,primecell-periphid = <0x00253180>; reg = <0x48004000 0x400>; interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "cmd_irq"; clocks = <&rcc SDMMC3_K>; clock-names = "apb_pclk"; resets = <&rcc SDMMC3_R>; @@ -1439,7 +1438,6 @@ arm,primecell-periphid = <0x00253180>; reg = <0x58005000 0x1000>; interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "cmd_irq"; clocks = <&rcc SDMMC1_K>; clock-names = "apb_pclk"; resets = <&rcc SDMMC1_R>; @@ -1454,7 +1452,6 @@ arm,primecell-periphid = <0x00253180>; reg = <0x58007000 0x1000>; interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "cmd_irq"; clocks = <&rcc SDMMC2_K>; clock-names = "apb_pclk"; resets = <&rcc SDMMC2_R>; diff --git a/arch/arm/boot/dts/stm32mp151a-dhcor-testbench.dts b/arch/arm/boot/dts/stm32mp151a-dhcor-testbench.dts new file mode 100644 index 000000000000..e0f828ecc2fa --- /dev/null +++ b/arch/arm/boot/dts/stm32mp151a-dhcor-testbench.dts @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause) +/* + * Copyright (C) 2022 Marek Vasut <marex@denx.de> + */ + +/dts-v1/; + +#include "stm32mp151.dtsi" +#include "stm32mp15xx-dhcor-som.dtsi" +#include "stm32mp15xx-dhcor-testbench.dtsi" + +/ { + model = "DH electronics STM32MP151A DHCOR Testbench"; + compatible = "dh,stm32mp151a-dhcor-testbench", + "dh,stm32mp151a-dhcor-som", + "st,stm32mp151"; +}; diff --git a/arch/arm/boot/dts/stm32mp157a-dhcor-avenger96.dts b/arch/arm/boot/dts/stm32mp157a-dhcor-avenger96.dts index 2e3c9fbb4eb3..275167f26fd9 100644 --- a/arch/arm/boot/dts/stm32mp157a-dhcor-avenger96.dts +++ b/arch/arm/boot/dts/stm32mp157a-dhcor-avenger96.dts @@ -13,7 +13,6 @@ /dts-v1/; #include "stm32mp157.dtsi" -#include "stm32mp15xc.dtsi" #include "stm32mp15xx-dhcor-som.dtsi" #include "stm32mp15xx-dhcor-avenger96.dtsi" diff --git a/arch/arm/boot/dts/stm32mp157c-emstamp-argon.dtsi b/arch/arm/boot/dts/stm32mp157c-emstamp-argon.dtsi index 30156b7546ed..aef02e6421a3 100644 --- a/arch/arm/boot/dts/stm32mp157c-emstamp-argon.dtsi +++ b/arch/arm/boot/dts/stm32mp157c-emstamp-argon.dtsi @@ -173,7 +173,7 @@ phy-handle = <&phy0>; st,eth-ref-clk-sel; - mdio0 { + mdio { #address-cells = <1>; #size-cells = <0>; compatible = "snps,dwmac-mdio"; diff --git a/arch/arm/boot/dts/stm32mp157c-ev1.dts b/arch/arm/boot/dts/stm32mp157c-ev1.dts index 050c3c27a420..a665189fe621 100644 --- a/arch/arm/boot/dts/stm32mp157c-ev1.dts +++ b/arch/arm/boot/dts/stm32mp157c-ev1.dts @@ -144,7 +144,7 @@ max-speed = <1000>; phy-handle = <&phy0>; - mdio0 { + mdio { #address-cells = <1>; #size-cells = <0>; compatible = "snps,dwmac-mdio"; @@ -370,6 +370,14 @@ &usbh_ehci { phys = <&usbphyc_port0>; status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + /* onboard HUB */ + hub@1 { + compatible = "usb424,2514"; + reg = <1>; + vdd-supply = <&v3v3>; + }; }; &usbotg_hs { @@ -393,6 +401,11 @@ st,tune-squelch-level = <3>; st,tune-hs-rx-offset = <2>; st,no-lsfs-sc; + + connector { + compatible = "usb-a-connector"; + vbus-supply = <&vbus_sw>; + }; }; &usbphyc_port1 { diff --git a/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts b/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts index e8d2ec41d537..cb00ce7cec8b 100644 --- a/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts +++ b/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts @@ -112,7 +112,7 @@ phy-handle = <ðphy>; status = "okay"; - mdio0 { + mdio { compatible = "snps,dwmac-mdio"; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/stm32mp157c-odyssey.dts b/arch/arm/boot/dts/stm32mp157c-odyssey.dts index ed66d25b8bf3..a8b3f7a54703 100644 --- a/arch/arm/boot/dts/stm32mp157c-odyssey.dts +++ b/arch/arm/boot/dts/stm32mp157c-odyssey.dts @@ -41,7 +41,7 @@ assigned-clock-rates = <125000000>; /* Clock PLL4 to 750Mhz in ATF/U-Boot */ st,eth-clk-sel; - mdio0 { + mdio { #address-cells = <1>; #size-cells = <0>; compatible = "snps,dwmac-mdio"; diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi index 5f586f024060..4709677151aa 100644 --- a/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi @@ -242,7 +242,7 @@ sai2a_port: port { sai2a_endpoint: endpoint { remote-endpoint = <&sgtl5000_tx_endpoint>; - format = "i2s"; + dai-format = "i2s"; mclk-fs = <512>; dai-tdm-slot-num = <2>; dai-tdm-slot-width = <16>; @@ -260,7 +260,7 @@ sai2b_port: port { sai2b_endpoint: endpoint { remote-endpoint = <&sgtl5000_rx_endpoint>; - format = "i2s"; + dai-format = "i2s"; mclk-fs = <512>; dai-tdm-slot-num = <2>; dai-tdm-slot-width = <16>; diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi index 238a611192e7..002f221f1694 100644 --- a/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi @@ -125,7 +125,7 @@ max-speed = <100>; phy-handle = <&phy0>; - mdio0 { + mdio { #address-cells = <1>; #size-cells = <0>; compatible = "snps,dwmac-mdio"; diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi index 90933077d66d..50af4a27d6be 100644 --- a/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi @@ -66,7 +66,6 @@ led4 { label = "green:user3"; gpios = <&gpiog 1 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "none"; default-state = "off"; panic-indicator; }; @@ -100,7 +99,7 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - gpios = <&gpioz 3 GPIO_ACTIVE_HIGH>; + gpio = <&gpioz 3 GPIO_ACTIVE_HIGH>; enable-active-high; }; }; @@ -151,7 +150,7 @@ max-speed = <1000>; phy-handle = <&phy0>; - mdio0 { + mdio { #address-cells = <1>; #size-cells = <0>; compatible = "snps,dwmac-mdio"; @@ -359,7 +358,7 @@ sai2a_port: port { sai2a_endpoint: endpoint { remote-endpoint = <&adv7513_i2s0>; - format = "i2s"; + dai-format = "i2s"; mclk-fs = <256>; }; }; diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcor-drc-compact.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcor-drc-compact.dtsi index 27477bb219de..c32c160f97f2 100644 --- a/arch/arm/boot/dts/stm32mp15xx-dhcor-drc-compact.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-dhcor-drc-compact.dtsi @@ -78,7 +78,7 @@ max-speed = <1000>; phy-handle = <&phy0>; - mdio0 { + mdio { #address-cells = <1>; #size-cells = <0>; compatible = "snps,dwmac-mdio"; diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcor-testbench.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcor-testbench.dtsi new file mode 100644 index 000000000000..5fdb74b652ac --- /dev/null +++ b/arch/arm/boot/dts/stm32mp15xx-dhcor-testbench.dtsi @@ -0,0 +1,171 @@ +// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause) +/* + * Copyright (C) 2022 Marek Vasut <marex@denx.de> + */ + +/ { + aliases { + ethernet0 = ðernet0; + mmc0 = &sdmmc1; + mmc1 = &sdmmc2; + serial0 = &uart4; + serial1 = &uart7; + spi0 = &qspi; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + sd_switch: regulator-sd_switch { + compatible = "regulator-gpio"; + regulator-name = "sd_switch"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2900000>; + regulator-type = "voltage"; + regulator-always-on; + + gpios = <&gpioi 5 GPIO_ACTIVE_HIGH>; + gpios-states = <0>; + states = <1800000 0x1>, + <2900000 0x0>; + }; +}; + +&adc { + pinctrl-names = "default"; + pinctrl-0 = <&adc12_ain_pins_b>; + vdd-supply = <&vdd>; + vdda-supply = <&vdda>; + vref-supply = <&vdda>; + status = "okay"; + + adc1: adc@0 { + st,adc-channels = <0 1 6>; + st,min-sample-time-nsecs = <5000>; + status = "okay"; + }; + + adc2: adc@100 { + st,adc-channels = <0 1 2>; + st,min-sample-time-nsecs = <5000>; + status = "okay"; + }; +}; + +ðernet0 { + status = "okay"; + pinctrl-0 = <ðernet0_rgmii_pins_c>; + pinctrl-1 = <ðernet0_rgmii_sleep_pins_c>; + pinctrl-names = "default", "sleep"; + phy-mode = "rgmii"; + max-speed = <1000>; + phy-handle = <&phy0>; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + reset-gpios = <&gpioz 2 GPIO_ACTIVE_LOW>; + reset-delay-us = <1000>; + reset-post-delay-us = <1000>; + + phy0: ethernet-phy@7 { + reg = <7>; + + rxc-skew-ps = <1500>; + rxdv-skew-ps = <540>; + rxd0-skew-ps = <420>; + rxd1-skew-ps = <420>; + rxd2-skew-ps = <420>; + rxd3-skew-ps = <420>; + + txc-skew-ps = <1440>; + txen-skew-ps = <540>; + txd0-skew-ps = <420>; + txd1-skew-ps = <420>; + txd2-skew-ps = <420>; + txd3-skew-ps = <420>; + }; + }; +}; + +&sdmmc1 { + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_b>; + pinctrl-1 = <&sdmmc1_b4_od_pins_a &sdmmc1_dir_pins_b>; + pinctrl-2 = <&sdmmc1_b4_sleep_pins_a &sdmmc1_dir_sleep_pins_b>; + cd-gpios = <&gpioi 8 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; + disable-wp; + st,sig-dir; + st,neg-edge; + st,use-ckin; + bus-width = <4>; + vmmc-supply = <&vdd_sd>; + vqmmc-supply = <&sd_switch>; + status = "okay"; +}; + +&sdmmc2 { + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_c>; + pinctrl-1 = <&sdmmc2_b4_od_pins_a &sdmmc2_d47_pins_c>; + pinctrl-2 = <&sdmmc2_b4_sleep_pins_a &sdmmc2_d47_sleep_pins_c>; + bus-width = <8>; + mmc-ddr-1_8v; + no-sd; + no-sdio; + non-removable; + st,neg-edge; + vmmc-supply = <&v3v3>; + vqmmc-supply = <&v3v3>; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&uart4_pins_b>; + /delete-property/dmas; + /delete-property/dma-names; + status = "okay"; +}; + +&uart7 { + pinctrl-names = "default"; + pinctrl-0 = <&uart7_pins_a>; + uart-has-rtscts; + /delete-property/dmas; + /delete-property/dma-names; + status = "okay"; +}; + +&usbh_ehci { + phys = <&usbphyc_port0>; + status = "okay"; +}; + +&usbh_ohci { + phys = <&usbphyc_port0>; + status = "okay"; +}; + +&usbotg_hs { + pinctrl-0 = <&usbotg_hs_pins_a>; + pinctrl-names = "default"; + phy-names = "usb2-phy"; + phys = <&usbphyc_port1 0>; + status = "okay"; + vbus-supply = <&vbus_otg>; +}; + +&usbphyc { + status = "okay"; +}; + +&usbphyc_port0 { + phy-supply = <&vdd_usb>; +}; + +&usbphyc_port1 { + phy-supply = <&vdd_usb>; +}; diff --git a/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi b/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi index 8b48d3c89a04..7798a2e17c5c 100644 --- a/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi @@ -141,7 +141,7 @@ max-speed = <1000>; phy-handle = <&phy0>; - mdio0 { + mdio { #address-cells = <1>; #size-cells = <0>; compatible = "snps,dwmac-mdio"; @@ -508,7 +508,7 @@ sai2a_port: port { sai2a_endpoint: endpoint { remote-endpoint = <&cs42l51_tx_endpoint>; - format = "i2s"; + dai-format = "i2s"; mclk-fs = <256>; dai-tdm-slot-num = <2>; dai-tdm-slot-width = <32>; @@ -526,7 +526,7 @@ sai2b_port: port { sai2b_endpoint: endpoint { remote-endpoint = <&cs42l51_rx_endpoint>; - format = "i2s"; + dai-format = "i2s"; mclk-fs = <256>; dai-tdm-slot-num = <2>; dai-tdm-slot-width = <32>; diff --git a/arch/arm/boot/dts/suniv-f1c100s.dtsi b/arch/arm/boot/dts/suniv-f1c100s.dtsi index 0edc1724407b..9455d27e516e 100644 --- a/arch/arm/boot/dts/suniv-f1c100s.dtsi +++ b/arch/arm/boot/dts/suniv-f1c100s.dtsi @@ -166,6 +166,12 @@ drive-strength = <30>; }; + /omit-if-no-ref/ + i2c0_pd_pins: i2c0-pd-pins { + pins = "PD0", "PD12"; + function = "i2c0"; + }; + spi0_pc_pins: spi0-pc-pins { pins = "PC0", "PC1", "PC2", "PC3"; function = "spi0"; @@ -177,6 +183,42 @@ }; }; + i2c0: i2c@1c27000 { + compatible = "allwinner,suniv-f1c100s-i2c", + "allwinner,sun6i-a31-i2c"; + reg = <0x01c27000 0x400>; + interrupts = <7>; + clocks = <&ccu CLK_BUS_I2C0>; + resets = <&ccu RST_BUS_I2C0>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c1: i2c@1c27400 { + compatible = "allwinner,suniv-f1c100s-i2c", + "allwinner,sun6i-a31-i2c"; + reg = <0x01c27400 0x400>; + interrupts = <8>; + clocks = <&ccu CLK_BUS_I2C1>; + resets = <&ccu RST_BUS_I2C1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@1c27800 { + compatible = "allwinner,suniv-f1c100s-i2c", + "allwinner,sun6i-a31-i2c"; + reg = <0x01c27800 0x400>; + interrupts = <9>; + clocks = <&ccu CLK_BUS_I2C2>; + resets = <&ccu RST_BUS_I2C2>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + timer@1c20c00 { compatible = "allwinner,suniv-f1c100s-timer"; reg = <0x01c20c00 0x90>; @@ -192,6 +234,34 @@ clocks = <&osc32k>; }; + pwm: pwm@1c21000 { + compatible = "allwinner,suniv-f1c100s-pwm", + "allwinner,sun7i-a20-pwm"; + reg = <0x01c21000 0x400>; + clocks = <&osc24M>; + #pwm-cells = <3>; + status = "disabled"; + }; + + ir: ir@1c22c00 { + compatible = "allwinner,suniv-f1c100s-ir", + "allwinner,sun6i-a31-ir"; + reg = <0x01c22c00 0x400>; + clocks = <&ccu CLK_BUS_IR>, <&ccu CLK_IR>; + clock-names = "apb", "ir"; + resets = <&ccu RST_BUS_IR>; + interrupts = <6>; + status = "disabled"; + }; + + lradc: lradc@1c23400 { + compatible = "allwinner,suniv-f1c100s-lradc", + "allwinner,sun8i-a83t-r-lradc"; + reg = <0x01c23400 0x400>; + interrupts = <22>; + status = "disabled"; + }; + uart0: serial@1c25000 { compatible = "snps,dw-apb-uart"; reg = <0x01c25000 0x400>; diff --git a/arch/arm/boot/dts/sunplus-sp7021.dtsi b/arch/arm/boot/dts/sunplus-sp7021.dtsi index 7dc4ce3619c7..ae9bbe0320b8 100644 --- a/arch/arm/boot/dts/sunplus-sp7021.dtsi +++ b/arch/arm/boot/dts/sunplus-sp7021.dtsi @@ -211,7 +211,6 @@ interrupt-names = "dma_w", "master_risc", "slave_risc"; clocks = <&clkc CLK_SPI_COMBO_1>; resets = <&rstc RST_SPI_COMBO_1>; - spi-max-frequency = <25000000>; status = "disabled"; }; @@ -225,7 +224,6 @@ interrupt-names = "dma_w", "master_risc", "slave_risc"; clocks = <&clkc CLK_SPI_COMBO_2>; resets = <&rstc RST_SPI_COMBO_2>; - spi-max-frequency = <25000000>; status = "disabled"; }; @@ -239,7 +237,6 @@ interrupt-names = "dma_w", "master_risc", "slave_risc"; clocks = <&clkc CLK_SPI_COMBO_3>; resets = <&rstc RST_SPI_COMBO_3>; - spi-max-frequency = <25000000>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi b/arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi index e899d14f38c3..1d1d127cf38f 100644 --- a/arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi +++ b/arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi @@ -89,13 +89,13 @@ }; reg_gmac_3v3: gmac-3v3 { - compatible = "regulator-fixed"; - regulator-name = "gmac-3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - startup-delay-us = <100000>; - enable-active-high; - gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>; + compatible = "regulator-fixed"; + regulator-name = "gmac-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <100000>; + enable-active-high; + gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>; }; wifi_pwrseq: wifi_pwrseq { diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/sunxi-h3-h5.dtsi index 09aefb4e90f8..686193bd6bd9 100644 --- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi +++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi @@ -302,6 +302,8 @@ interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ccu CLK_BUS_EHCI0>, <&ccu CLK_BUS_OHCI0>; resets = <&ccu RST_BUS_EHCI0>, <&ccu RST_BUS_OHCI0>; + phys = <&usbphy 0>; + phy-names = "usb"; status = "disabled"; }; @@ -312,6 +314,8 @@ clocks = <&ccu CLK_BUS_EHCI0>, <&ccu CLK_BUS_OHCI0>, <&ccu CLK_USB_OHCI0>; resets = <&ccu RST_BUS_EHCI0>, <&ccu RST_BUS_OHCI0>; + phys = <&usbphy 0>; + phy-names = "usb"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/tegra114-asus-tf701t.dts b/arch/arm/boot/dts/tegra114-asus-tf701t.dts index 284209b0bd96..9279d24db009 100644 --- a/arch/arm/boot/dts/tegra114-asus-tf701t.dts +++ b/arch/arm/boot/dts/tegra114-asus-tf701t.dts @@ -80,7 +80,7 @@ }; pinmux@70000868 { - asus_pad_ec_default: asus-pad-ec-default { + asus_pad_ec_default: pinmux-asus-pad-ec-default { ec-interrupt { nvidia,pins = "kb_col5_pq5"; nvidia,function = "kbc"; @@ -98,7 +98,7 @@ }; }; - backlight_default: backlight-default { + backlight_default: pinmux-backlight-default { backlight-enable { nvidia,pins = "gmi_ad10_ph2"; nvidia,function = "gmi"; @@ -108,7 +108,7 @@ }; }; - codec_default: codec-default { + codec_default: pinmux-codec-default { ldo1-en { nvidia,pins = "sdmmc1_wp_n_pv3"; nvidia,function = "sdmmc1"; @@ -127,7 +127,7 @@ }; }; - gpio_keys_default: gpio-keys-default { + gpio_keys_default: pinmux-gpio-keys-default { power { nvidia,pins = "kb_col0_pq0"; nvidia,function = "kbc"; @@ -146,7 +146,7 @@ }; }; - gpio_hall_sensor_default: gpio-hall-sensor-default { + gpio_hall_sensor_default: pinmux-gpio-hall-sensor-default { ulpi_data4_po5 { nvidia,pins = "ulpi_data4_po5"; nvidia,function = "spi2"; @@ -156,7 +156,7 @@ }; }; - hp_det_default: hp-det-default { + hp_det_default: pinmux-hp-det-default { gmi_iordy_pi5 { nvidia,pins = "kb_row7_pr7"; nvidia,function = "rsvd2"; @@ -166,7 +166,7 @@ }; }; - imu_default: imu-default { + imu_default: pinmux-imu-default { kb_row3_pr3 { nvidia,pins = "kb_row3_pr3"; nvidia,function = "rsvd3"; @@ -176,7 +176,7 @@ }; }; - pwm_default: pwm-default { + pwm_default: pinmux-pwm-default { gmi_ad9_ph1 { nvidia,pins = "gmi_ad9_ph1"; nvidia,function = "pwm1"; @@ -187,7 +187,7 @@ }; /* XXX make this something more sensible */ - pwm_sleep: pwm-sleep { + pwm_sleep: pinmux-pwm-sleep { gmi_ad9_ph1 { nvidia,pins = "gmi_ad9_ph1"; nvidia,function = "pwm1"; @@ -197,7 +197,7 @@ }; }; - sdmmc3_default: sdmmc3-default { + sdmmc3_default: pinmux-sdmmc3-default { sdmmc3_clk_pa6 { nvidia,pins = "sdmmc3_clk_pa6"; nvidia,function = "sdmmc3"; @@ -233,7 +233,7 @@ }; }; - sdmmc3_vdd_default: sdmmc3-vdd-default { + sdmmc3_vdd_default: pinmux-sdmmc3-vdd-default { gmi_clk_pk1 { nvidia,pins = "gmi_clk_pk1"; nvidia,function = "gmi"; @@ -243,7 +243,7 @@ }; }; - vdd_lcd_default: vdd-lcd-default { + vdd_lcd_default: pinmux-vdd-lcd-default { sdmmc4_clk_pcc4 { nvidia,pins = "sdmmc4_clk_pcc4"; nvidia,function = "sdmmc4"; diff --git a/arch/arm/boot/dts/tegra124-nyan-big.dts b/arch/arm/boot/dts/tegra124-nyan-big.dts index fdc1d64dfff9..9a01dfed1379 100644 --- a/arch/arm/boot/dts/tegra124-nyan-big.dts +++ b/arch/arm/boot/dts/tegra124-nyan-big.dts @@ -18,6 +18,7 @@ aux-bus { panel: panel { compatible = "auo,b133xtn01"; + power-supply = <&vdd_3v3_panel>; backlight = <&backlight>; }; }; @@ -39,7 +40,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinmux_default>; - pinmux_default: common { + pinmux_default: pinmux { clk_32k_out_pa0 { nvidia,pins = "clk_32k_out_pa0"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; diff --git a/arch/arm/boot/dts/tegra124-nyan-blaze.dts b/arch/arm/boot/dts/tegra124-nyan-blaze.dts index abdf4456826f..0beef1c03ff3 100644 --- a/arch/arm/boot/dts/tegra124-nyan-blaze.dts +++ b/arch/arm/boot/dts/tegra124-nyan-blaze.dts @@ -20,6 +20,7 @@ aux-bus { panel: panel { compatible = "samsung,ltn140at29-301"; + power-supply = <&vdd_3v3_panel>; backlight = <&backlight>; }; }; @@ -37,7 +38,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinmux_default>; - pinmux_default: common { + pinmux_default: pinmux { clk_32k_out_pa0 { nvidia,pins = "clk_32k_out_pa0"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; diff --git a/arch/arm/boot/dts/tegra124-venice2.dts b/arch/arm/boot/dts/tegra124-venice2.dts index 8f40fcfc11b0..7e739879c00c 100644 --- a/arch/arm/boot/dts/tegra124-venice2.dts +++ b/arch/arm/boot/dts/tegra124-venice2.dts @@ -52,6 +52,7 @@ aux-bus { panel: panel { compatible = "lg,lp129qe"; + power-supply = <&vdd_3v3_panel>; backlight = <&backlight>; }; }; @@ -70,7 +71,7 @@ pinctrl-names = "boot"; pinctrl-0 = <&pinmux_boot>; - pinmux_boot: common { + pinmux_boot: pinmux { dap_mclk1_pw4 { nvidia,pins = "dap_mclk1_pw4"; nvidia,function = "extperiph1"; diff --git a/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts b/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts index dac6d02a1b15..17afc2c7cb37 100644 --- a/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts +++ b/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts @@ -342,7 +342,7 @@ }; }; - state_i2cmux_ddc: pinmux_i2cmux_ddc { + state_i2cmux_ddc: pinmux-i2cmux-ddc { ddc { nvidia,pins = "ddc"; nvidia,function = "i2c2"; @@ -353,7 +353,7 @@ }; }; - state_i2cmux_pta: pinmux_i2cmux_pta { + state_i2cmux_pta: pinmux-i2cmux-pta { ddc { nvidia,pins = "ddc"; nvidia,function = "rsvd4"; @@ -364,7 +364,7 @@ }; }; - state_i2cmux_idle: pinmux_i2cmux_idle { + state_i2cmux_idle: pinmux-i2cmux-idle { ddc { nvidia,pins = "ddc"; nvidia,function = "rsvd4"; diff --git a/arch/arm/boot/dts/tegra20-asus-tf101.dts b/arch/arm/boot/dts/tegra20-asus-tf101.dts index bf797a1f27ea..c39ddb462ad0 100644 --- a/arch/arm/boot/dts/tegra20-asus-tf101.dts +++ b/arch/arm/boot/dts/tegra20-asus-tf101.dts @@ -399,7 +399,7 @@ }; }; - state_i2cmux_ddc: pinmux_i2cmux_ddc { + state_i2cmux_ddc: pinmux-i2cmux-ddc { ddc { nvidia,pins = "ddc"; nvidia,function = "i2c2"; @@ -411,7 +411,7 @@ }; }; - state_i2cmux_pta: pinmux_i2cmux_pta { + state_i2cmux_pta: pinmux-i2cmux-pta { ddc { nvidia,pins = "ddc"; nvidia,function = "rsvd4"; @@ -423,7 +423,7 @@ }; }; - state_i2cmux_idle: pinmux_i2cmux_idle { + state_i2cmux_idle: pinmux-i2cmux-idle { ddc { nvidia,pins = "ddc"; nvidia,function = "rsvd4"; @@ -1019,7 +1019,7 @@ }; display-panel { - compatible = "panel-lvds"; + compatible = "auo,b101ew05", "panel-lvds"; /* AUO B101EW05 using custom timings */ diff --git a/arch/arm/boot/dts/tegra20-seaboard.dts b/arch/arm/boot/dts/tegra20-seaboard.dts index 5b4c5ef30996..ab33ff67fdb9 100644 --- a/arch/arm/boot/dts/tegra20-seaboard.dts +++ b/arch/arm/boot/dts/tegra20-seaboard.dts @@ -285,7 +285,7 @@ }; }; - state_i2cmux_ddc: pinmux_i2cmux_ddc { + state_i2cmux_ddc: pinmux-i2cmux-ddc { ddc { nvidia,pins = "ddc"; nvidia,function = "i2c2"; @@ -296,7 +296,7 @@ }; }; - state_i2cmux_pta: pinmux_i2cmux_pta { + state_i2cmux_pta: pinmux-i2cmux-pta { ddc { nvidia,pins = "ddc"; nvidia,function = "rsvd4"; @@ -307,7 +307,7 @@ }; }; - state_i2cmux_idle: pinmux_i2cmux_idle { + state_i2cmux_idle: pinmux-i2cmux-idle { ddc { nvidia,pins = "ddc"; nvidia,function = "rsvd4"; diff --git a/arch/arm/boot/dts/tegra20-tamonten.dtsi b/arch/arm/boot/dts/tegra20-tamonten.dtsi index 0e19bd0a847c..980272ad59a4 100644 --- a/arch/arm/boot/dts/tegra20-tamonten.dtsi +++ b/arch/arm/boot/dts/tegra20-tamonten.dtsi @@ -249,7 +249,7 @@ }; }; - state_i2cmux_ddc: pinmux_i2cmux_ddc { + state_i2cmux_ddc: pinmux-i2cmux-ddc { ddc { nvidia,pins = "ddc"; nvidia,function = "i2c2"; @@ -260,7 +260,7 @@ }; }; - state_i2cmux_pta: pinmux_i2cmux_pta { + state_i2cmux_pta: pinmux-i2cmux-pta { ddc { nvidia,pins = "ddc"; nvidia,function = "rsvd4"; @@ -271,7 +271,7 @@ }; }; - state_i2cmux_idle: pinmux_i2cmux_idle { + state_i2cmux_idle: pinmux-i2cmux-idle { ddc { nvidia,pins = "ddc"; nvidia,function = "rsvd4"; diff --git a/arch/arm/boot/dts/tegra20-ventana.dts b/arch/arm/boot/dts/tegra20-ventana.dts index caa17e876e41..2d7bb442d6b6 100644 --- a/arch/arm/boot/dts/tegra20-ventana.dts +++ b/arch/arm/boot/dts/tegra20-ventana.dts @@ -284,7 +284,7 @@ }; }; - state_i2cmux_ddc: pinmux_i2cmux_ddc { + state_i2cmux_ddc: pinmux-i2cmux-ddc { ddc { nvidia,pins = "ddc"; nvidia,function = "i2c2"; @@ -295,7 +295,7 @@ }; }; - state_i2cmux_pta: pinmux_i2cmux_pta { + state_i2cmux_pta: pinmux-i2cmux-pta { ddc { nvidia,pins = "ddc"; nvidia,function = "rsvd4"; @@ -306,7 +306,7 @@ }; }; - state_i2cmux_idle: pinmux_i2cmux_idle { + state_i2cmux_idle: pinmux-i2cmux-idle { ddc { nvidia,pins = "ddc"; nvidia,function = "rsvd4"; diff --git a/arch/arm/boot/dts/tegra30-asus-transformer-common.dtsi b/arch/arm/boot/dts/tegra30-asus-transformer-common.dtsi index c27e70d8bf2b..08ea9cb32d0e 100644 --- a/arch/arm/boot/dts/tegra30-asus-transformer-common.dtsi +++ b/arch/arm/boot/dts/tegra30-asus-transformer-common.dtsi @@ -168,7 +168,7 @@ nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; nvidia,lock = <0>; - nvidia,ioreset = <0>; + nvidia,io-reset = <0>; }; /* SDMMC3 pinmux */ @@ -711,7 +711,7 @@ nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; nvidia,lock = <0>; - nvidia,ioreset = <0>; + nvidia,io-reset = <0>; }; /* GPIO keys pinmux */ @@ -805,7 +805,7 @@ nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; nvidia,lock = <0>; - nvidia,ioreset = <0>; + nvidia,io-reset = <0>; }; vi_d10_pt2 { @@ -937,7 +937,7 @@ nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; nvidia,lock = <0>; - nvidia,ioreset = <0>; + nvidia,io-reset = <0>; }; vi_mclk_pt1 { @@ -1509,7 +1509,6 @@ extcon-keys { compatible = "gpio-keys"; - interrupt-parent = <&gpio>; switch-dock-hall-sensor { label = "Lid sensor"; @@ -1542,7 +1541,6 @@ gpio-keys { compatible = "gpio-keys"; - interrupt-parent = <&gpio>; key-power { label = "Power"; diff --git a/arch/arm/boot/dts/tegra30-pegatron-chagall.dts b/arch/arm/boot/dts/tegra30-pegatron-chagall.dts index 7c81f0205549..d9408a90653a 100644 --- a/arch/arm/boot/dts/tegra30-pegatron-chagall.dts +++ b/arch/arm/boot/dts/tegra30-pegatron-chagall.dts @@ -134,7 +134,7 @@ nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; nvidia,lock = <0>; - nvidia,ioreset = <0>; + nvidia,io-reset = <0>; }; /* SDMMC3 pinmux */ @@ -150,7 +150,6 @@ nvidia,pins = "sdmmc3_cmd_pa7", "sdmmc3_dat3_pb4", "sdmmc3_dat2_pb5", - "sdmmc3_dat2_pb5", "sdmmc3_dat1_pb6", "sdmmc3_dat0_pb7", "sdmmc3_dat5_pd0", @@ -622,7 +621,7 @@ nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; nvidia,lock = <0>; - nvidia,ioreset = <0>; + nvidia,io-reset = <0>; }; pu1 { @@ -689,7 +688,7 @@ nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; nvidia,lock = <0>; - nvidia,ioreset = <0>; + nvidia,io-reset = <0>; }; vi_d10_pt2 { @@ -864,7 +863,7 @@ nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; nvidia,lock = <0>; - nvidia,ioreset = <0>; + nvidia,io-reset = <0>; }; vi_mclk_pt1 { @@ -2653,7 +2652,6 @@ extcon-keys { compatible = "gpio-keys"; - interrupt-parent = <&gpio>; switch-dock-insert { label = "Chagall Dock"; @@ -2686,7 +2684,6 @@ gpio-keys { compatible = "gpio-keys"; - interrupt-parent = <&gpio>; key-power { label = "Power"; diff --git a/arch/arm/boot/dts/uniphier-pro5-epcore.dts b/arch/arm/boot/dts/uniphier-pro5-epcore.dts new file mode 100644 index 000000000000..ed759dcc3216 --- /dev/null +++ b/arch/arm/boot/dts/uniphier-pro5-epcore.dts @@ -0,0 +1,76 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Device Tree Source for UniPhier Pro5 EP-CORE Board (Pro5-PCIe_EP-CORE) + * + * Copyright (C) 2021 Socionext Inc. + * Author: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> + */ + +/dts-v1/; +#include "uniphier-pro5.dtsi" +#include "uniphier-support-card.dtsi" + +/ { + model = "UniPhier Pro5 EP-CORE Board"; + compatible = "socionext,uniphier-pro5-epcore", "socionext,uniphier-pro5"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + aliases { + serial0 = &serial0; + serial1 = &serial1; + serial2 = &serial2; + i2c0 = &i2c0; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x40000000>; + }; +}; + +ðsc { + interrupts = <1 IRQ_TYPE_LEVEL_LOW>; +}; + +&serialsc { + interrupts = <1 IRQ_TYPE_LEVEL_LOW>; +}; + +&serial0 { + status = "okay"; +}; + +&serial1 { + status = "okay"; +}; + +&serial2 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; +}; + +&usb0 { + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; + +&emmc { + status = "okay"; +}; + +&sd { + status = "okay"; +}; + +&pcie_ep { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/uniphier-pro5-proex.dts b/arch/arm/boot/dts/uniphier-pro5-proex.dts new file mode 100644 index 000000000000..2cfb84f73cc0 --- /dev/null +++ b/arch/arm/boot/dts/uniphier-pro5-proex.dts @@ -0,0 +1,59 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Device Tree Source for UniPhier Pro5 ProEX Board + * + * Copyright (C) 2021 Socionext Inc. + * Author: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> + */ + +/dts-v1/; +#include "uniphier-pro5.dtsi" + +/ { + model = "UniPhier Pro5 ProEX Board"; + compatible = "socionext,uniphier-pro5-proex", "socionext,uniphier-pro5"; + + chosen { + stdout-path = "serial2:115200n8"; + }; + + aliases { + serial1 = &serial1; + serial2 = &serial2; + i2c0 = &i2c0; + i2c1 = &i2c3; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x40000000>; + }; +}; + +&serial1 { + status = "okay"; +}; + +&serial2 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; +}; + +&i2c3 { + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; + +&emmc { + status = "okay"; +}; + +&pcie_ep { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/vexpress-v2m.dtsi b/arch/arm/boot/dts/vexpress-v2m.dtsi index f434fe5cf4a1..def538ce8769 100644 --- a/arch/arm/boot/dts/vexpress-v2m.dtsi +++ b/arch/arm/boot/dts/vexpress-v2m.dtsi @@ -383,49 +383,49 @@ leds { compatible = "gpio-leds"; - user1 { + led-user1 { label = "v2m:green:user1"; gpios = <&v2m_led_gpios 0 0>; linux,default-trigger = "heartbeat"; }; - user2 { + led-user2 { label = "v2m:green:user2"; gpios = <&v2m_led_gpios 1 0>; linux,default-trigger = "mmc0"; }; - user3 { + led-user3 { label = "v2m:green:user3"; gpios = <&v2m_led_gpios 2 0>; linux,default-trigger = "cpu0"; }; - user4 { + led-user4 { label = "v2m:green:user4"; gpios = <&v2m_led_gpios 3 0>; linux,default-trigger = "cpu1"; }; - user5 { + led-user5 { label = "v2m:green:user5"; gpios = <&v2m_led_gpios 4 0>; linux,default-trigger = "cpu2"; }; - user6 { + led-user6 { label = "v2m:green:user6"; gpios = <&v2m_led_gpios 5 0>; linux,default-trigger = "cpu3"; }; - user7 { + led-user7 { label = "v2m:green:user7"; gpios = <&v2m_led_gpios 6 0>; linux,default-trigger = "cpu4"; }; - user8 { + led-user8 { label = "v2m:green:user8"; gpios = <&v2m_led_gpios 7 0>; linux,default-trigger = "cpu5"; diff --git a/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts b/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts index de79dcfd32e6..f892977da9e4 100644 --- a/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts +++ b/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts @@ -259,7 +259,7 @@ xtal-trim = /bits/ 8 <0x06>; sleep-gpio = <&gpio0 24 GPIO_ACTIVE_HIGH>; - reset-gpio = <&gpio6 10 GPIO_ACTIVE_HIGH>; + reset-gpio = <&gpio6 10 GPIO_ACTIVE_LOW>; fsl,spi-cs-sck-delay = <180>; fsl,spi-sck-cs-delay = <250>; |