diff options
Diffstat (limited to 'arch/arm')
74 files changed, 1207 insertions, 161 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index e91c7cdc6fe5..2f88d8d97701 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -6,7 +6,7 @@ config ARM select HAVE_DMA_API_DEBUG select HAVE_IDE if PCI || ISA || PCMCIA select HAVE_DMA_ATTRS - select HAVE_DMA_CONTIGUOUS if (CPU_V6 || CPU_V6K || CPU_V7) + select HAVE_DMA_CONTIGUOUS if MMU select HAVE_MEMBLOCK select RTC_LIB select SYS_SUPPORTS_APM_EMULATION @@ -38,7 +38,6 @@ config ARM select HARDIRQS_SW_RESEND select GENERIC_IRQ_PROBE select GENERIC_IRQ_SHOW - select GENERIC_IRQ_PROBE select ARCH_WANT_IPC_PARSE_VERSION select HARDIRQS_SW_RESEND select CPU_PM if (SUSPEND || CPU_IDLE) @@ -126,11 +125,6 @@ config TRACE_IRQFLAGS_SUPPORT bool default y -config GENERIC_LOCKBREAK - bool - default y - depends on SMP && PREEMPT - config RWSEM_GENERIC_SPINLOCK bool default y @@ -2150,6 +2144,7 @@ source "drivers/cpufreq/Kconfig" config CPU_FREQ_IMX tristate "CPUfreq driver for i.MX CPUs" depends on ARCH_MXC && CPU_FREQ + select CPU_FREQ_TABLE help This enables the CPUfreq driver for i.MX CPUs. diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index 59509c48d7e5..bd0cff3f808c 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -154,5 +154,10 @@ #size-cells = <0>; ti,hwmods = "i2c3"; }; + + wdt2: wdt@44e35000 { + compatible = "ti,omap3-wdt"; + ti,hwmods = "wd_timer2"; + }; }; }; diff --git a/arch/arm/boot/dts/at91sam9g25ek.dts b/arch/arm/boot/dts/at91sam9g25ek.dts index 7829a4d0cb22..96514c134e54 100644 --- a/arch/arm/boot/dts/at91sam9g25ek.dts +++ b/arch/arm/boot/dts/at91sam9g25ek.dts @@ -15,7 +15,7 @@ compatible = "atmel,at91sam9g25ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9"; chosen { - bootargs = "128M console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs"; + bootargs = "console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs"; }; ahb { diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts index cd86177a3ea2..59d9789e5508 100644 --- a/arch/arm/boot/dts/imx51-babbage.dts +++ b/arch/arm/boot/dts/imx51-babbage.dts @@ -25,8 +25,8 @@ aips@70000000 { /* aips-1 */ spba@70000000 { esdhc@70004000 { /* ESDHC1 */ - fsl,cd-internal; - fsl,wp-internal; + fsl,cd-controller; + fsl,wp-controller; status = "okay"; }; diff --git a/arch/arm/boot/dts/kirkwood-iconnect.dts b/arch/arm/boot/dts/kirkwood-iconnect.dts index 52d947045106..f8ca6fa88192 100644 --- a/arch/arm/boot/dts/kirkwood-iconnect.dts +++ b/arch/arm/boot/dts/kirkwood-iconnect.dts @@ -41,9 +41,13 @@ }; power-blue { label = "power:blue"; - gpios = <&gpio1 11 0>; + gpios = <&gpio1 10 0>; linux,default-trigger = "timer"; }; + power-red { + label = "power:red"; + gpios = <&gpio1 11 0>; + }; usb1 { label = "usb1:blue"; gpios = <&gpio1 12 0>; diff --git a/arch/arm/boot/dts/twl6030.dtsi b/arch/arm/boot/dts/twl6030.dtsi index 3b2f3510d7eb..d351b27d7213 100644 --- a/arch/arm/boot/dts/twl6030.dtsi +++ b/arch/arm/boot/dts/twl6030.dtsi @@ -66,6 +66,7 @@ vcxio: regulator@8 { compatible = "ti,twl6030-vcxio"; + regulator-always-on; }; vusb: regulator@9 { @@ -74,10 +75,12 @@ v1v8: regulator@10 { compatible = "ti,twl6030-v1v8"; + regulator-always-on; }; v2v1: regulator@11 { compatible = "ti,twl6030-v2v1"; + regulator-always-on; }; clk32kg: regulator@12 { diff --git a/arch/arm/configs/armadillo800eva_defconfig b/arch/arm/configs/armadillo800eva_defconfig index 7d8718468e0d..90610c7030f7 100644 --- a/arch/arm/configs/armadillo800eva_defconfig +++ b/arch/arm/configs/armadillo800eva_defconfig @@ -33,7 +33,7 @@ CONFIG_AEABI=y CONFIG_FORCE_MAX_ZONEORDER=13 CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="console=tty0 console=ttySC1,115200 earlyprintk=sh-sci.1,115200 ignore_loglevel root=/dev/nfs ip=dhcp nfsroot=,rsize=4096,wsize=4096" +CONFIG_CMDLINE="console=tty0 console=ttySC1,115200 earlyprintk=sh-sci.1,115200 ignore_loglevel root=/dev/nfs ip=dhcp nfsroot=,rsize=4096,wsize=4096 rw" CONFIG_CMDLINE_FORCE=y CONFIG_KEXEC=y CONFIG_VFP=y diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig index 2d4f661d1cf6..da6845493caa 100644 --- a/arch/arm/configs/u8500_defconfig +++ b/arch/arm/configs/u8500_defconfig @@ -86,6 +86,7 @@ CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y CONFIG_LEDS_LM3530=y CONFIG_LEDS_LP5521=y +CONFIG_LEDS_GPIO=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_AB8500=y CONFIG_RTC_DRV_PL031=y diff --git a/arch/arm/include/asm/dma-mapping.h b/arch/arm/include/asm/dma-mapping.h index 2ae842df4551..5c44dcb0987b 100644 --- a/arch/arm/include/asm/dma-mapping.h +++ b/arch/arm/include/asm/dma-mapping.h @@ -203,6 +203,13 @@ static inline void dma_free_writecombine(struct device *dev, size_t size, } /* + * This can be called during early boot to increase the size of the atomic + * coherent DMA pool above the default value of 256KiB. It must be called + * before postcore_initcall. + */ +extern void __init init_dma_coherent_pool_size(unsigned long size); + +/* * This can be called during boot to increase the size of the consistent * DMA region above it's default value of 2MB. It must be called before the * memory allocator is initialised, i.e. before any core_initcall. diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h index f66626d71e7d..41dc31f834c3 100644 --- a/arch/arm/include/asm/pgtable.h +++ b/arch/arm/include/asm/pgtable.h @@ -195,6 +195,18 @@ static inline pte_t *pmd_page_vaddr(pmd_t pmd) #define pte_clear(mm,addr,ptep) set_pte_ext(ptep, __pte(0), 0) +#define pte_none(pte) (!pte_val(pte)) +#define pte_present(pte) (pte_val(pte) & L_PTE_PRESENT) +#define pte_write(pte) (!(pte_val(pte) & L_PTE_RDONLY)) +#define pte_dirty(pte) (pte_val(pte) & L_PTE_DIRTY) +#define pte_young(pte) (pte_val(pte) & L_PTE_YOUNG) +#define pte_exec(pte) (!(pte_val(pte) & L_PTE_XN)) +#define pte_special(pte) (0) + +#define pte_present_user(pte) \ + ((pte_val(pte) & (L_PTE_PRESENT | L_PTE_USER)) == \ + (L_PTE_PRESENT | L_PTE_USER)) + #if __LINUX_ARM_ARCH__ < 6 static inline void __sync_icache_dcache(pte_t pteval) { @@ -206,25 +218,15 @@ extern void __sync_icache_dcache(pte_t pteval); static inline void set_pte_at(struct mm_struct *mm, unsigned long addr, pte_t *ptep, pte_t pteval) { - if (addr >= TASK_SIZE) - set_pte_ext(ptep, pteval, 0); - else { + unsigned long ext = 0; + + if (addr < TASK_SIZE && pte_present_user(pteval)) { __sync_icache_dcache(pteval); - set_pte_ext(ptep, pteval, PTE_EXT_NG); + ext |= PTE_EXT_NG; } -} -#define pte_none(pte) (!pte_val(pte)) -#define pte_present(pte) (pte_val(pte) & L_PTE_PRESENT) -#define pte_write(pte) (!(pte_val(pte) & L_PTE_RDONLY)) -#define pte_dirty(pte) (pte_val(pte) & L_PTE_DIRTY) -#define pte_young(pte) (pte_val(pte) & L_PTE_YOUNG) -#define pte_exec(pte) (!(pte_val(pte) & L_PTE_XN)) -#define pte_special(pte) (0) - -#define pte_present_user(pte) \ - ((pte_val(pte) & (L_PTE_PRESENT | L_PTE_USER)) == \ - (L_PTE_PRESENT | L_PTE_USER)) + set_pte_ext(ptep, pteval, ext); +} #define PTE_BIT_FUNC(fn,op) \ static inline pte_t pte_##fn(pte_t pte) { pte_val(pte) op; return pte; } @@ -251,13 +253,13 @@ static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) * * 3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1 * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 - * <--------------- offset --------------------> <- type --> 0 0 0 + * <--------------- offset ----------------------> < type -> 0 0 0 * - * This gives us up to 63 swap files and 32GB per swap file. Note that + * This gives us up to 31 swap files and 64GB per swap file. Note that * the offset field is always non-zero. */ #define __SWP_TYPE_SHIFT 3 -#define __SWP_TYPE_BITS 6 +#define __SWP_TYPE_BITS 5 #define __SWP_TYPE_MASK ((1 << __SWP_TYPE_BITS) - 1) #define __SWP_OFFSET_SHIFT (__SWP_TYPE_BITS + __SWP_TYPE_SHIFT) diff --git a/arch/arm/include/asm/sched_clock.h b/arch/arm/include/asm/sched_clock.h index e3f757263438..05b8e82ec9f5 100644 --- a/arch/arm/include/asm/sched_clock.h +++ b/arch/arm/include/asm/sched_clock.h @@ -10,5 +10,7 @@ extern void sched_clock_postinit(void); extern void setup_sched_clock(u32 (*read)(void), int bits, unsigned long rate); +extern void setup_sched_clock_needs_suspend(u32 (*read)(void), int bits, + unsigned long rate); #endif diff --git a/arch/arm/kernel/sched_clock.c b/arch/arm/kernel/sched_clock.c index 27d186abbc06..f4515393248d 100644 --- a/arch/arm/kernel/sched_clock.c +++ b/arch/arm/kernel/sched_clock.c @@ -21,6 +21,8 @@ struct clock_data { u32 epoch_cyc_copy; u32 mult; u32 shift; + bool suspended; + bool needs_suspend; }; static void sched_clock_poll(unsigned long wrap_ticks); @@ -49,6 +51,9 @@ static unsigned long long cyc_to_sched_clock(u32 cyc, u32 mask) u64 epoch_ns; u32 epoch_cyc; + if (cd.suspended) + return cd.epoch_ns; + /* * Load the epoch_cyc and epoch_ns atomically. We do this by * ensuring that we always write epoch_cyc, epoch_ns and @@ -98,6 +103,13 @@ static void sched_clock_poll(unsigned long wrap_ticks) update_sched_clock(); } +void __init setup_sched_clock_needs_suspend(u32 (*read)(void), int bits, + unsigned long rate) +{ + setup_sched_clock(read, bits, rate); + cd.needs_suspend = true; +} + void __init setup_sched_clock(u32 (*read)(void), int bits, unsigned long rate) { unsigned long r, w; @@ -169,11 +181,23 @@ void __init sched_clock_postinit(void) static int sched_clock_suspend(void) { sched_clock_poll(sched_clock_timer.data); + if (cd.needs_suspend) + cd.suspended = true; return 0; } +static void sched_clock_resume(void) +{ + if (cd.needs_suspend) { + cd.epoch_cyc = read_sched_clock(); + cd.epoch_cyc_copy = cd.epoch_cyc; + cd.suspended = false; + } +} + static struct syscore_ops sched_clock_ops = { .suspend = sched_clock_suspend, + .resume = sched_clock_resume, }; static int __init sched_clock_syscore_init(void) diff --git a/arch/arm/kernel/topology.c b/arch/arm/kernel/topology.c index 198b08456e90..26c12c6440fc 100644 --- a/arch/arm/kernel/topology.c +++ b/arch/arm/kernel/topology.c @@ -321,7 +321,7 @@ void store_cpu_topology(unsigned int cpuid) * init_cpu_topology is called at boot when only one cpu is running * which prevent simultaneous write access to cpu_topology array */ -void init_cpu_topology(void) +void __init init_cpu_topology(void) { unsigned int cpu; diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile index 2473fd1fd51c..af72969820b4 100644 --- a/arch/arm/lib/Makefile +++ b/arch/arm/lib/Makefile @@ -16,13 +16,30 @@ lib-y := backtrace.o changebit.o csumipv6.o csumpartial.o \ call_with_stack.o mmu-y := clear_user.o copy_page.o getuser.o putuser.o -mmu-y += copy_from_user.o copy_to_user.o + +# the code in uaccess.S is not preemption safe and +# probably faster on ARMv3 only +ifeq ($(CONFIG_PREEMPT),y) + mmu-y += copy_from_user.o copy_to_user.o +else +ifneq ($(CONFIG_CPU_32v3),y) + mmu-y += copy_from_user.o copy_to_user.o +else + mmu-y += uaccess.o +endif +endif # using lib_ here won't override already available weak symbols obj-$(CONFIG_UACCESS_WITH_MEMCPY) += uaccess_with_memcpy.o -lib-$(CONFIG_MMU) += $(mmu-y) -lib-y += io-readsw-armv4.o io-writesw-armv4.o +lib-$(CONFIG_MMU) += $(mmu-y) + +ifeq ($(CONFIG_CPU_32v3),y) + lib-y += io-readsw-armv3.o io-writesw-armv3.o +else + lib-y += io-readsw-armv4.o io-writesw-armv4.o +endif + lib-$(CONFIG_ARCH_RPC) += ecard.o io-acorn.o floppydma.o lib-$(CONFIG_ARCH_SHARK) += io-shark.o diff --git a/arch/arm/lib/io-readsw-armv3.S b/arch/arm/lib/io-readsw-armv3.S new file mode 100644 index 000000000000..88487c8c4f23 --- /dev/null +++ b/arch/arm/lib/io-readsw-armv3.S @@ -0,0 +1,106 @@ +/* + * linux/arch/arm/lib/io-readsw-armv3.S + * + * Copyright (C) 1995-2000 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/linkage.h> +#include <asm/assembler.h> + +.Linsw_bad_alignment: + adr r0, .Linsw_bad_align_msg + mov r2, lr + b panic +.Linsw_bad_align_msg: + .asciz "insw: bad buffer alignment (0x%p, lr=0x%08lX)\n" + .align + +.Linsw_align: tst r1, #1 + bne .Linsw_bad_alignment + + ldr r3, [r0] + strb r3, [r1], #1 + mov r3, r3, lsr #8 + strb r3, [r1], #1 + + subs r2, r2, #1 + moveq pc, lr + +ENTRY(__raw_readsw) + teq r2, #0 @ do we have to check for the zero len? + moveq pc, lr + tst r1, #3 + bne .Linsw_align + +.Linsw_aligned: mov ip, #0xff + orr ip, ip, ip, lsl #8 + stmfd sp!, {r4, r5, r6, lr} + + subs r2, r2, #8 + bmi .Lno_insw_8 + +.Linsw_8_lp: ldr r3, [r0] + and r3, r3, ip + ldr r4, [r0] + orr r3, r3, r4, lsl #16 + + ldr r4, [r0] + and r4, r4, ip + ldr r5, [r0] + orr r4, r4, r5, lsl #16 + + ldr r5, [r0] + and r5, r5, ip + ldr r6, [r0] + orr r5, r5, r6, lsl #16 + + ldr r6, [r0] + and r6, r6, ip + ldr lr, [r0] + orr r6, r6, lr, lsl #16 + + stmia r1!, {r3 - r6} + + subs r2, r2, #8 + bpl .Linsw_8_lp + + tst r2, #7 + ldmeqfd sp!, {r4, r5, r6, pc} + +.Lno_insw_8: tst r2, #4 + beq .Lno_insw_4 + + ldr r3, [r0] + and r3, r3, ip + ldr r4, [r0] + orr r3, r3, r4, lsl #16 + + ldr r4, [r0] + and r4, r4, ip + ldr r5, [r0] + orr r4, r4, r5, lsl #16 + + stmia r1!, {r3, r4} + +.Lno_insw_4: tst r2, #2 + beq .Lno_insw_2 + + ldr r3, [r0] + and r3, r3, ip + ldr r4, [r0] + orr r3, r3, r4, lsl #16 + + str r3, [r1], #4 + +.Lno_insw_2: tst r2, #1 + ldrne r3, [r0] + strneb r3, [r1], #1 + movne r3, r3, lsr #8 + strneb r3, [r1] + + ldmfd sp!, {r4, r5, r6, pc} + + diff --git a/arch/arm/lib/io-writesw-armv3.S b/arch/arm/lib/io-writesw-armv3.S new file mode 100644 index 000000000000..49b800419e32 --- /dev/null +++ b/arch/arm/lib/io-writesw-armv3.S @@ -0,0 +1,126 @@ +/* + * linux/arch/arm/lib/io-writesw-armv3.S + * + * Copyright (C) 1995-2000 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/linkage.h> +#include <asm/assembler.h> + +.Loutsw_bad_alignment: + adr r0, .Loutsw_bad_align_msg + mov r2, lr + b panic +.Loutsw_bad_align_msg: + .asciz "outsw: bad buffer alignment (0x%p, lr=0x%08lX)\n" + .align + +.Loutsw_align: tst r1, #1 + bne .Loutsw_bad_alignment + + add r1, r1, #2 + + ldr r3, [r1, #-4] + mov r3, r3, lsr #16 + orr r3, r3, r3, lsl #16 + str r3, [r0] + subs r2, r2, #1 + moveq pc, lr + +ENTRY(__raw_writesw) + teq r2, #0 @ do we have to check for the zero len? + moveq pc, lr + tst r1, #3 + bne .Loutsw_align + + stmfd sp!, {r4, r5, r6, lr} + + subs r2, r2, #8 + bmi .Lno_outsw_8 + +.Loutsw_8_lp: ldmia r1!, {r3, r4, r5, r6} + + mov ip, r3, lsl #16 + orr ip, ip, ip, lsr #16 + str ip, [r0] + + mov ip, r3, lsr #16 + orr ip, ip, ip, lsl #16 + str ip, [r0] + + mov ip, r4, lsl #16 + orr ip, ip, ip, lsr #16 + str ip, [r0] + + mov ip, r4, lsr #16 + orr ip, ip, ip, lsl #16 + str ip, [r0] + + mov ip, r5, lsl #16 + orr ip, ip, ip, lsr #16 + str ip, [r0] + + mov ip, r5, lsr #16 + orr ip, ip, ip, lsl #16 + str ip, [r0] + + mov ip, r6, lsl #16 + orr ip, ip, ip, lsr #16 + str ip, [r0] + + mov ip, r6, lsr #16 + orr ip, ip, ip, lsl #16 + str ip, [r0] + + subs r2, r2, #8 + bpl .Loutsw_8_lp + + tst r2, #7 + ldmeqfd sp!, {r4, r5, r6, pc} + +.Lno_outsw_8: tst r2, #4 + beq .Lno_outsw_4 + + ldmia r1!, {r3, r4} + + mov ip, r3, lsl #16 + orr ip, ip, ip, lsr #16 + str ip, [r0] + + mov ip, r3, lsr #16 + orr ip, ip, ip, lsl #16 + str ip, [r0] + + mov ip, r4, lsl #16 + orr ip, ip, ip, lsr #16 + str ip, [r0] + + mov ip, r4, lsr #16 + orr ip, ip, ip, lsl #16 + str ip, [r0] + +.Lno_outsw_4: tst r2, #2 + beq .Lno_outsw_2 + + ldr r3, [r1], #4 + + mov ip, r3, lsl #16 + orr ip, ip, ip, lsr #16 + str ip, [r0] + + mov ip, r3, lsr #16 + orr ip, ip, ip, lsl #16 + str ip, [r0] + +.Lno_outsw_2: tst r2, #1 + + ldrne r3, [r1] + + movne ip, r3, lsl #16 + orrne ip, ip, ip, lsr #16 + strne ip, [r0] + + ldmfd sp!, {r4, r5, r6, pc} diff --git a/arch/arm/lib/uaccess.S b/arch/arm/lib/uaccess.S new file mode 100644 index 000000000000..5c908b1cb8ed --- /dev/null +++ b/arch/arm/lib/uaccess.S @@ -0,0 +1,564 @@ +/* + * linux/arch/arm/lib/uaccess.S + * + * Copyright (C) 1995, 1996,1997,1998 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Routines to block copy data to/from user memory + * These are highly optimised both for the 4k page size + * and for various alignments. + */ +#include <linux/linkage.h> +#include <asm/assembler.h> +#include <asm/errno.h> +#include <asm/domain.h> + + .text + +#define PAGE_SHIFT 12 + +/* Prototype: int __copy_to_user(void *to, const char *from, size_t n) + * Purpose : copy a block to user memory from kernel memory + * Params : to - user memory + * : from - kernel memory + * : n - number of bytes to copy + * Returns : Number of bytes NOT copied. + */ + +.Lc2u_dest_not_aligned: + rsb ip, ip, #4 + cmp ip, #2 + ldrb r3, [r1], #1 +USER( TUSER( strb) r3, [r0], #1) @ May fault + ldrgeb r3, [r1], #1 +USER( TUSER( strgeb) r3, [r0], #1) @ May fault + ldrgtb r3, [r1], #1 +USER( TUSER( strgtb) r3, [r0], #1) @ May fault + sub r2, r2, ip + b .Lc2u_dest_aligned + +ENTRY(__copy_to_user) + stmfd sp!, {r2, r4 - r7, lr} + cmp r2, #4 + blt .Lc2u_not_enough + ands ip, r0, #3 + bne .Lc2u_dest_not_aligned +.Lc2u_dest_aligned: + + ands ip, r1, #3 + bne .Lc2u_src_not_aligned +/* + * Seeing as there has to be at least 8 bytes to copy, we can + * copy one word, and force a user-mode page fault... + */ + +.Lc2u_0fupi: subs r2, r2, #4 + addmi ip, r2, #4 + bmi .Lc2u_0nowords + ldr r3, [r1], #4 +USER( TUSER( str) r3, [r0], #4) @ May fault + mov ip, r0, lsl #32 - PAGE_SHIFT @ On each page, use a ld/st??t instruction + rsb ip, ip, #0 + movs ip, ip, lsr #32 - PAGE_SHIFT + beq .Lc2u_0fupi +/* + * ip = max no. of bytes to copy before needing another "strt" insn + */ + cmp r2, ip + movlt ip, r2 + sub r2, r2, ip + subs ip, ip, #32 + blt .Lc2u_0rem8lp + +.Lc2u_0cpy8lp: ldmia r1!, {r3 - r6} + stmia r0!, {r3 - r6} @ Shouldnt fault + ldmia r1!, {r3 - r6} + subs ip, ip, #32 + stmia r0!, {r3 - r6} @ Shouldnt fault + bpl .Lc2u_0cpy8lp + +.Lc2u_0rem8lp: cmn ip, #16 + ldmgeia r1!, {r3 - r6} + stmgeia r0!, {r3 - r6} @ Shouldnt fault + tst ip, #8 + ldmneia r1!, {r3 - r4} + stmneia r0!, {r3 - r4} @ Shouldnt fault + tst ip, #4 + ldrne r3, [r1], #4 + TUSER( strne) r3, [r0], #4 @ Shouldnt fault + ands ip, ip, #3 + beq .Lc2u_0fupi +.Lc2u_0nowords: teq ip, #0 + beq .Lc2u_finished +.Lc2u_nowords: cmp ip, #2 + ldrb r3, [r1], #1 +USER( TUSER( strb) r3, [r0], #1) @ May fault + ldrgeb r3, [r1], #1 +USER( TUSER( strgeb) r3, [r0], #1) @ May fault + ldrgtb r3, [r1], #1 +USER( TUSER( strgtb) r3, [r0], #1) @ May fault + b .Lc2u_finished + +.Lc2u_not_enough: + movs ip, r2 + bne .Lc2u_nowords +.Lc2u_finished: mov r0, #0 + ldmfd sp!, {r2, r4 - r7, pc} + +.Lc2u_src_not_aligned: + bic r1, r1, #3 + ldr r7, [r1], #4 + cmp ip, #2 + bgt .Lc2u_3fupi + beq .Lc2u_2fupi +.Lc2u_1fupi: subs r2, r2, #4 + addmi ip, r2, #4 + bmi .Lc2u_1nowords + mov r3, r7, pull #8 + ldr r7, [r1], #4 + orr r3, r3, r7, push #24 +USER( TUSER( str) r3, [r0], #4) @ May fault + mov ip, r0, lsl #32 - PAGE_SHIFT + rsb ip, ip, #0 + movs ip, ip, lsr #32 - PAGE_SHIFT + beq .Lc2u_1fupi + cmp r2, ip + movlt ip, r2 + sub r2, r2, ip + subs ip, ip, #16 + blt .Lc2u_1rem8lp + +.Lc2u_1cpy8lp: mov r3, r7, pull #8 + ldmia r1!, {r4 - r7} + subs ip, ip, #16 + orr r3, r3, r4, push #24 + mov r4, r4, pull #8 + orr r4, r4, r5, push #24 + mov r5, r5, pull #8 + orr r5, r5, r6, push #24 + mov r6, r6, pull #8 + orr r6, r6, r7, push #24 + stmia r0!, {r3 - r6} @ Shouldnt fault + bpl .Lc2u_1cpy8lp + +.Lc2u_1rem8lp: tst ip, #8 + movne r3, r7, pull #8 + ldmneia r1!, {r4, r7} + orrne r3, r3, r4, push #24 + movne r4, r4, pull #8 + orrne r4, r4, r7, push #24 + stmneia r0!, {r3 - r4} @ Shouldnt fault + tst ip, #4 + movne r3, r7, pull #8 + ldrne r7, [r1], #4 + orrne r3, r3, r7, push #24 + TUSER( strne) r3, [r0], #4 @ Shouldnt fault + ands ip, ip, #3 + beq .Lc2u_1fupi +.Lc2u_1nowords: mov r3, r7, get_byte_1 + teq ip, #0 + beq .Lc2u_finished + cmp ip, #2 +USER( TUSER( strb) r3, [r0], #1) @ May fault + movge r3, r7, get_byte_2 +USER( TUSER( strgeb) r3, [r0], #1) @ May fault + movgt r3, r7, get_byte_3 +USER( TUSER( strgtb) r3, [r0], #1) @ May fault + b .Lc2u_finished + +.Lc2u_2fupi: subs r2, r2, #4 + addmi ip, r2, #4 + bmi .Lc2u_2nowords + mov r3, r7, pull #16 + ldr r7, [r1], #4 + orr r3, r3, r7, push #16 +USER( TUSER( str) r3, [r0], #4) @ May fault + mov ip, r0, lsl #32 - PAGE_SHIFT + rsb ip, ip, #0 + movs ip, ip, lsr #32 - PAGE_SHIFT + beq .Lc2u_2fupi + cmp r2, ip + movlt ip, r2 + sub r2, r2, ip + subs ip, ip, #16 + blt .Lc2u_2rem8lp + +.Lc2u_2cpy8lp: mov r3, r7, pull #16 + ldmia r1!, {r4 - r7} + subs ip, ip, #16 + orr r3, r3, r4, push #16 + mov r4, r4, pull #16 + orr r4, r4, r5, push #16 + mov r5, r5, pull #16 + orr r5, r5, r6, push #16 + mov r6, r6, pull #16 + orr r6, r6, r7, push #16 + stmia r0!, {r3 - r6} @ Shouldnt fault + bpl .Lc2u_2cpy8lp + +.Lc2u_2rem8lp: tst ip, #8 + movne r3, r7, pull #16 + ldmneia r1!, {r4, r7} + orrne r3, r3, r4, push #16 + movne r4, r4, pull #16 + orrne r4, r4, r7, push #16 + stmneia r0!, {r3 - r4} @ Shouldnt fault + tst ip, #4 + movne r3, r7, pull #16 + ldrne r7, [r1], #4 + orrne r3, r3, r7, push #16 + TUSER( strne) r3, [r0], #4 @ Shouldnt fault + ands ip, ip, #3 + beq .Lc2u_2fupi +.Lc2u_2nowords: mov r3, r7, get_byte_2 + teq ip, #0 + beq .Lc2u_finished + cmp ip, #2 +USER( TUSER( strb) r3, [r0], #1) @ May fault + movge r3, r7, get_byte_3 +USER( TUSER( strgeb) r3, [r0], #1) @ May fault + ldrgtb r3, [r1], #0 +USER( TUSER( strgtb) r3, [r0], #1) @ May fault + b .Lc2u_finished + +.Lc2u_3fupi: subs r2, r2, #4 + addmi ip, r2, #4 + bmi .Lc2u_3nowords + mov r3, r7, pull #24 + ldr r7, [r1], #4 + orr r3, r3, r7, push #8 +USER( TUSER( str) r3, [r0], #4) @ May fault + mov ip, r0, lsl #32 - PAGE_SHIFT + rsb ip, ip, #0 + movs ip, ip, lsr #32 - PAGE_SHIFT + beq .Lc2u_3fupi + cmp r2, ip + movlt ip, r2 + sub r2, r2, ip + subs ip, ip, #16 + blt .Lc2u_3rem8lp + +.Lc2u_3cpy8lp: mov r3, r7, pull #24 + ldmia r1!, {r4 - r7} + subs ip, ip, #16 + orr r3, r3, r4, push #8 + mov r4, r4, pull #24 + orr r4, r4, r5, push #8 + mov r5, r5, pull #24 + orr r5, r5, r6, push #8 + mov r6, r6, pull #24 + orr r6, r6, r7, push #8 + stmia r0!, {r3 - r6} @ Shouldnt fault + bpl .Lc2u_3cpy8lp + +.Lc2u_3rem8lp: tst ip, #8 + movne r3, r7, pull #24 + ldmneia r1!, {r4, r7} + orrne r3, r3, r4, push #8 + movne r4, r4, pull #24 + orrne r4, r4, r7, push #8 + stmneia r0!, {r3 - r4} @ Shouldnt fault + tst ip, #4 + movne r3, r7, pull #24 + ldrne r7, [r1], #4 + orrne r3, r3, r7, push #8 + TUSER( strne) r3, [r0], #4 @ Shouldnt fault + ands ip, ip, #3 + beq .Lc2u_3fupi +.Lc2u_3nowords: mov r3, r7, get_byte_3 + teq ip, #0 + beq .Lc2u_finished + cmp ip, #2 +USER( TUSER( strb) r3, [r0], #1) @ May fault + ldrgeb r3, [r1], #1 +USER( TUSER( strgeb) r3, [r0], #1) @ May fault + ldrgtb r3, [r1], #0 +USER( TUSER( strgtb) r3, [r0], #1) @ May fault + b .Lc2u_finished +ENDPROC(__copy_to_user) + + .pushsection .fixup,"ax" + .align 0 +9001: ldmfd sp!, {r0, r4 - r7, pc} + .popsection + +/* Prototype: unsigned long __copy_from_user(void *to,const void *from,unsigned long n); + * Purpose : copy a block from user memory to kernel memory + * Params : to - kernel memory + * : from - user memory + * : n - number of bytes to copy + * Returns : Number of bytes NOT copied. + */ +.Lcfu_dest_not_aligned: + rsb ip, ip, #4 + cmp ip, #2 +USER( TUSER( ldrb) r3, [r1], #1) @ May fault + strb r3, [r0], #1 +USER( TUSER( ldrgeb) r3, [r1], #1) @ May fault + strgeb r3, [r0], #1 +USER( TUSER( ldrgtb) r3, [r1], #1) @ May fault + strgtb r3, [r0], #1 + sub r2, r2, ip + b .Lcfu_dest_aligned + +ENTRY(__copy_from_user) + stmfd sp!, {r0, r2, r4 - r7, lr} + cmp r2, #4 + blt .Lcfu_not_enough + ands ip, r0, #3 + bne .Lcfu_dest_not_aligned +.Lcfu_dest_aligned: + ands ip, r1, #3 + bne .Lcfu_src_not_aligned + +/* + * Seeing as there has to be at least 8 bytes to copy, we can + * copy one word, and force a user-mode page fault... + */ + +.Lcfu_0fupi: subs r2, r2, #4 + addmi ip, r2, #4 + bmi .Lcfu_0nowords +USER( TUSER( ldr) r3, [r1], #4) + str r3, [r0], #4 + mov ip, r1, lsl #32 - PAGE_SHIFT @ On each page, use a ld/st??t instruction + rsb ip, ip, #0 + movs ip, ip, lsr #32 - PAGE_SHIFT + beq .Lcfu_0fupi +/* + * ip = max no. of bytes to copy before needing another "strt" insn + */ + cmp r2, ip + movlt ip, r2 + sub r2, r2, ip + subs ip, ip, #32 + blt .Lcfu_0rem8lp + +.Lcfu_0cpy8lp: ldmia r1!, {r3 - r6} @ Shouldnt fault + stmia r0!, {r3 - r6} + ldmia r1!, {r3 - r6} @ Shouldnt fault + subs ip, ip, #32 + stmia r0!, {r3 - r6} + bpl .Lcfu_0cpy8lp + +.Lcfu_0rem8lp: cmn ip, #16 + ldmgeia r1!, {r3 - r6} @ Shouldnt fault + stmgeia r0!, {r3 - r6} + tst ip, #8 + ldmneia r1!, {r3 - r4} @ Shouldnt fault + stmneia r0!, {r3 - r4} + tst ip, #4 + TUSER( ldrne) r3, [r1], #4 @ Shouldnt fault + strne r3, [r0], #4 + ands ip, ip, #3 + beq .Lcfu_0fupi +.Lcfu_0nowords: teq ip, #0 + beq .Lcfu_finished +.Lcfu_nowords: cmp ip, #2 +USER( TUSER( ldrb) r3, [r1], #1) @ May fault + strb r3, [r0], #1 +USER( TUSER( ldrgeb) r3, [r1], #1) @ May fault + strgeb r3, [r0], #1 +USER( TUSER( ldrgtb) r3, [r1], #1) @ May fault + strgtb r3, [r0], #1 + b .Lcfu_finished + +.Lcfu_not_enough: + movs ip, r2 + bne .Lcfu_nowords +.Lcfu_finished: mov r0, #0 + add sp, sp, #8 + ldmfd sp!, {r4 - r7, pc} + +.Lcfu_src_not_aligned: + bic r1, r1, #3 +USER( TUSER( ldr) r7, [r1], #4) @ May fault + cmp ip, #2 + bgt .Lcfu_3fupi + beq .Lcfu_2fupi +.Lcfu_1fupi: subs r2, r2, #4 + addmi ip, r2, #4 + bmi .Lcfu_1nowords + mov r3, r7, pull #8 +USER( TUSER( ldr) r7, [r1], #4) @ May fault + orr r3, r3, r7, push #24 + str r3, [r0], #4 + mov ip, r1, lsl #32 - PAGE_SHIFT + rsb ip, ip, #0 + movs ip, ip, lsr #32 - PAGE_SHIFT + beq .Lcfu_1fupi + cmp r2, ip + movlt ip, r2 + sub r2, r2, ip + subs ip, ip, #16 + blt .Lcfu_1rem8lp + +.Lcfu_1cpy8lp: mov r3, r7, pull #8 + ldmia r1!, {r4 - r7} @ Shouldnt fault + subs ip, ip, #16 + orr r3, r3, r4, push #24 + mov r4, r4, pull #8 + orr r4, r4, r5, push #24 + mov r5, r5, pull #8 + orr r5, r5, r6, push #24 + mov r6, r6, pull #8 + orr r6, r6, r7, push #24 + stmia r0!, {r3 - r6} + bpl .Lcfu_1cpy8lp + +.Lcfu_1rem8lp: tst ip, #8 + movne r3, r7, pull #8 + ldmneia r1!, {r4, r7} @ Shouldnt fault + orrne r3, r3, r4, push #24 + movne r4, r4, pull #8 + orrne r4, r4, r7, push #24 + stmneia r0!, {r3 - r4} + tst ip, #4 + movne r3, r7, pull #8 +USER( TUSER( ldrne) r7, [r1], #4) @ May fault + orrne r3, r3, r7, push #24 + strne r3, [r0], #4 + ands ip, ip, #3 + beq .Lcfu_1fupi +.Lcfu_1nowords: mov r3, r7, get_byte_1 + teq ip, #0 + beq .Lcfu_finished + cmp ip, #2 + strb r3, [r0], #1 + movge r3, r7, get_byte_2 + strgeb r3, [r0], #1 + movgt r3, r7, get_byte_3 + strgtb r3, [r0], #1 + b .Lcfu_finished + +.Lcfu_2fupi: subs r2, r2, #4 + addmi ip, r2, #4 + bmi .Lcfu_2nowords + mov r3, r7, pull #16 +USER( TUSER( ldr) r7, [r1], #4) @ May fault + orr r3, r3, r7, push #16 + str r3, [r0], #4 + mov ip, r1, lsl #32 - PAGE_SHIFT + rsb ip, ip, #0 + movs ip, ip, lsr #32 - PAGE_SHIFT + beq .Lcfu_2fupi + cmp r2, ip + movlt ip, r2 + sub r2, r2, ip + subs ip, ip, #16 + blt .Lcfu_2rem8lp + + +.Lcfu_2cpy8lp: mov r3, r7, pull #16 + ldmia r1!, {r4 - r7} @ Shouldnt fault + subs ip, ip, #16 + orr r3, r3, r4, push #16 + mov r4, r4, pull #16 + orr r4, r4, r5, push #16 + mov r5, r5, pull #16 + orr r5, r5, r6, push #16 + mov r6, r6, pull #16 + orr r6, r6, r7, push #16 + stmia r0!, {r3 - r6} + bpl .Lcfu_2cpy8lp + +.Lcfu_2rem8lp: tst ip, #8 + movne r3, r7, pull #16 + ldmneia r1!, {r4, r7} @ Shouldnt fault + orrne r3, r3, r4, push #16 + movne r4, r4, pull #16 + orrne r4, r4, r7, push #16 + stmneia r0!, {r3 - r4} + tst ip, #4 + movne r3, r7, pull #16 +USER( TUSER( ldrne) r7, [r1], #4) @ May fault + orrne r3, r3, r7, push #16 + strne r3, [r0], #4 + ands ip, ip, #3 + beq .Lcfu_2fupi +.Lcfu_2nowords: mov r3, r7, get_byte_2 + teq ip, #0 + beq .Lcfu_finished + cmp ip, #2 + strb r3, [r0], #1 + movge r3, r7, get_byte_3 + strgeb r3, [r0], #1 +USER( TUSER( ldrgtb) r3, [r1], #0) @ May fault + strgtb r3, [r0], #1 + b .Lcfu_finished + +.Lcfu_3fupi: subs r2, r2, #4 + addmi ip, r2, #4 + bmi .Lcfu_3nowords + mov r3, r7, pull #24 +USER( TUSER( ldr) r7, [r1], #4) @ May fault + orr r3, r3, r7, push #8 + str r3, [r0], #4 + mov ip, r1, lsl #32 - PAGE_SHIFT + rsb ip, ip, #0 + movs ip, ip, lsr #32 - PAGE_SHIFT + beq .Lcfu_3fupi + cmp r2, ip + movlt ip, r2 + sub r2, r2, ip + subs ip, ip, #16 + blt .Lcfu_3rem8lp + +.Lcfu_3cpy8lp: mov r3, r7, pull #24 + ldmia r1!, {r4 - r7} @ Shouldnt fault + orr r3, r3, r4, push #8 + mov r4, r4, pull #24 + orr r4, r4, r5, push #8 + mov r5, r5, pull #24 + orr r5, r5, r6, push #8 + mov r6, r6, pull #24 + orr r6, r6, r7, push #8 + stmia r0!, {r3 - r6} + subs ip, ip, #16 + bpl .Lcfu_3cpy8lp + +.Lcfu_3rem8lp: tst ip, #8 + movne r3, r7, pull #24 + ldmneia r1!, {r4, r7} @ Shouldnt fault + orrne r3, r3, r4, push #8 + movne r4, r4, pull #24 + orrne r4, r4, r7, push #8 + stmneia r0!, {r3 - r4} + tst ip, #4 + movne r3, r7, pull #24 +USER( TUSER( ldrne) r7, [r1], #4) @ May fault + orrne r3, r3, r7, push #8 + strne r3, [r0], #4 + ands ip, ip, #3 + beq .Lcfu_3fupi +.Lcfu_3nowords: mov r3, r7, get_byte_3 + teq ip, #0 + beq .Lcfu_finished + cmp ip, #2 + strb r3, [r0], #1 +USER( TUSER( ldrgeb) r3, [r1], #1) @ May fault + strgeb r3, [r0], #1 +USER( TUSER( ldrgtb) r3, [r1], #1) @ May fault + strgtb r3, [r0], #1 + b .Lcfu_finished +ENDPROC(__copy_from_user) + + .pushsection .fixup,"ax" + .align 0 + /* + * We took an exception. r0 contains a pointer to + * the byte not copied. + */ +9001: ldr r2, [sp], #4 @ void *to + sub r2, r0, r2 @ bytes copied + ldr r1, [sp], #4 @ unsigned long count + subs r4, r1, r2 @ bytes left to copy + movne r1, r4 + blne __memzero + mov r0, r4 + ldmfd sp!, {r4 - r7, pc} + .popsection + diff --git a/arch/arm/mach-at91/at91rm9200_time.c b/arch/arm/mach-at91/at91rm9200_time.c index 104ca40d8d18..aaa443b48c91 100644 --- a/arch/arm/mach-at91/at91rm9200_time.c +++ b/arch/arm/mach-at91/at91rm9200_time.c @@ -197,7 +197,7 @@ void __init at91rm9200_timer_init(void) at91_st_read(AT91_ST_SR); /* Make IRQs happen for the system timer */ - setup_irq(AT91_ID_SYS, &at91rm9200_timer_irq); + setup_irq(NR_IRQS_LEGACY + AT91_ID_SYS, &at91rm9200_timer_irq); /* The 32KiHz "Slow Clock" (tick every 30517.58 nanoseconds) is used * directly for the clocksource and all clockevents, after adjusting diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c index 7b9c2ba396ed..bce572a530ef 100644 --- a/arch/arm/mach-at91/at91sam9260_devices.c +++ b/arch/arm/mach-at91/at91sam9260_devices.c @@ -726,6 +726,8 @@ static struct resource rtt_resources[] = { .flags = IORESOURCE_MEM, }, { .flags = IORESOURCE_MEM, + }, { + .flags = IORESOURCE_IRQ, }, }; @@ -744,10 +746,12 @@ static void __init at91_add_device_rtt_rtc(void) * The second resource is needed: * GPBR will serve as the storage for RTC time offset */ - at91sam9260_rtt_device.num_resources = 2; + at91sam9260_rtt_device.num_resources = 3; rtt_resources[1].start = AT91SAM9260_BASE_GPBR + 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR; rtt_resources[1].end = rtt_resources[1].start + 3; + rtt_resources[2].start = NR_IRQS_LEGACY + AT91_ID_SYS; + rtt_resources[2].end = NR_IRQS_LEGACY + AT91_ID_SYS; } #else static void __init at91_add_device_rtt_rtc(void) diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c index 8df5c1bdff92..bc2590d712d0 100644 --- a/arch/arm/mach-at91/at91sam9261_devices.c +++ b/arch/arm/mach-at91/at91sam9261_devices.c @@ -609,6 +609,8 @@ static struct resource rtt_resources[] = { .flags = IORESOURCE_MEM, }, { .flags = IORESOURCE_MEM, + }, { + .flags = IORESOURCE_IRQ, } }; @@ -626,10 +628,12 @@ static void __init at91_add_device_rtt_rtc(void) * The second resource is needed: * GPBR will serve as the storage for RTC time offset */ - at91sam9261_rtt_device.num_resources = 2; + at91sam9261_rtt_device.num_resources = 3; rtt_resources[1].start = AT91SAM9261_BASE_GPBR + 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR; rtt_resources[1].end = rtt_resources[1].start + 3; + rtt_resources[2].start = NR_IRQS_LEGACY + AT91_ID_SYS; + rtt_resources[2].end = NR_IRQS_LEGACY + AT91_ID_SYS; } #else static void __init at91_add_device_rtt_rtc(void) diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c index eb6bbf86fb9f..9b6ca734f1a9 100644 --- a/arch/arm/mach-at91/at91sam9263_devices.c +++ b/arch/arm/mach-at91/at91sam9263_devices.c @@ -990,6 +990,8 @@ static struct resource rtt0_resources[] = { .flags = IORESOURCE_MEM, }, { .flags = IORESOURCE_MEM, + }, { + .flags = IORESOURCE_IRQ, } }; @@ -1006,6 +1008,8 @@ static struct resource rtt1_resources[] = { .flags = IORESOURCE_MEM, }, { .flags = IORESOURCE_MEM, + }, { + .flags = IORESOURCE_IRQ, } }; @@ -1027,14 +1031,14 @@ static void __init at91_add_device_rtt_rtc(void) * The second resource is needed only for the chosen RTT: * GPBR will serve as the storage for RTC time offset */ - at91sam9263_rtt0_device.num_resources = 2; + at91sam9263_rtt0_device.num_resources = 3; at91sam9263_rtt1_device.num_resources = 1; pdev = &at91sam9263_rtt0_device; r = rtt0_resources; break; case 1: at91sam9263_rtt0_device.num_resources = 1; - at91sam9263_rtt1_device.num_resources = 2; + at91sam9263_rtt1_device.num_resources = 3; pdev = &at91sam9263_rtt1_device; r = rtt1_resources; break; @@ -1047,6 +1051,8 @@ static void __init at91_add_device_rtt_rtc(void) pdev->name = "rtc-at91sam9"; r[1].start = AT91SAM9263_BASE_GPBR + 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR; r[1].end = r[1].start + 3; + r[2].start = NR_IRQS_LEGACY + AT91_ID_SYS; + r[2].end = NR_IRQS_LEGACY + AT91_ID_SYS; } #else static void __init at91_add_device_rtt_rtc(void) diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c index 06073996a382..1b47319ca00b 100644 --- a/arch/arm/mach-at91/at91sam9g45_devices.c +++ b/arch/arm/mach-at91/at91sam9g45_devices.c @@ -1293,6 +1293,8 @@ static struct resource rtt_resources[] = { .flags = IORESOURCE_MEM, }, { .flags = IORESOURCE_MEM, + }, { + .flags = IORESOURCE_IRQ, } }; @@ -1310,10 +1312,12 @@ static void __init at91_add_device_rtt_rtc(void) * The second resource is needed: * GPBR will serve as the storage for RTC time offset */ - at91sam9g45_rtt_device.num_resources = 2; + at91sam9g45_rtt_device.num_resources = 3; rtt_resources[1].start = AT91SAM9G45_BASE_GPBR + 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR; rtt_resources[1].end = rtt_resources[1].start + 3; + rtt_resources[2].start = NR_IRQS_LEGACY + AT91_ID_SYS; + rtt_resources[2].end = NR_IRQS_LEGACY + AT91_ID_SYS; } #else static void __init at91_add_device_rtt_rtc(void) diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c index f09fff932172..b3d365dadef5 100644 --- a/arch/arm/mach-at91/at91sam9rl_devices.c +++ b/arch/arm/mach-at91/at91sam9rl_devices.c @@ -688,6 +688,8 @@ static struct resource rtt_resources[] = { .flags = IORESOURCE_MEM, }, { .flags = IORESOURCE_MEM, + }, { + .flags = IORESOURCE_IRQ, } }; @@ -705,10 +707,12 @@ static void __init at91_add_device_rtt_rtc(void) * The second resource is needed: * GPBR will serve as the storage for RTC time offset */ - at91sam9rl_rtt_device.num_resources = 2; + at91sam9rl_rtt_device.num_resources = 3; rtt_resources[1].start = AT91SAM9RL_BASE_GPBR + 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR; rtt_resources[1].end = rtt_resources[1].start + 3; + rtt_resources[2].start = NR_IRQS_LEGACY + AT91_ID_SYS; + rtt_resources[2].end = NR_IRQS_LEGACY + AT91_ID_SYS; } #else static void __init at91_add_device_rtt_rtc(void) diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c index de2ec6b8fea7..188c82971ebd 100644 --- a/arch/arm/mach-at91/clock.c +++ b/arch/arm/mach-at91/clock.c @@ -63,6 +63,12 @@ EXPORT_SYMBOL_GPL(at91_pmc_base); #define cpu_has_300M_plla() (cpu_is_at91sam9g10()) +#define cpu_has_240M_plla() (cpu_is_at91sam9261() \ + || cpu_is_at91sam9263() \ + || cpu_is_at91sam9rl()) + +#define cpu_has_210M_plla() (cpu_is_at91sam9260()) + #define cpu_has_pllb() (!(cpu_is_at91sam9rl() \ || cpu_is_at91sam9g45() \ || cpu_is_at91sam9x5() \ @@ -706,6 +712,12 @@ static int __init at91_pmc_init(unsigned long main_clock) } else if (cpu_has_800M_plla()) { if (plla.rate_hz > 800000000) pll_overclock = true; + } else if (cpu_has_240M_plla()) { + if (plla.rate_hz > 240000000) + pll_overclock = true; + } else if (cpu_has_210M_plla()) { + if (plla.rate_hz > 210000000) + pll_overclock = true; } else { if (plla.rate_hz > 209000000) pll_overclock = true; diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c index 4db5de54b6a7..6321567d8eaa 100644 --- a/arch/arm/mach-dove/common.c +++ b/arch/arm/mach-dove/common.c @@ -102,7 +102,8 @@ void __init dove_ehci1_init(void) void __init dove_ge00_init(struct mv643xx_eth_platform_data *eth_data) { orion_ge00_init(eth_data, DOVE_GE00_PHYS_BASE, - IRQ_DOVE_GE00_SUM, IRQ_DOVE_GE00_ERR); + IRQ_DOVE_GE00_SUM, IRQ_DOVE_GE00_ERR, + 1600); } /***************************************************************************** diff --git a/arch/arm/mach-exynos/mach-origen.c b/arch/arm/mach-exynos/mach-origen.c index 5ca80307d6d7..4e574c24581c 100644 --- a/arch/arm/mach-exynos/mach-origen.c +++ b/arch/arm/mach-exynos/mach-origen.c @@ -42,6 +42,7 @@ #include <plat/backlight.h> #include <plat/fb.h> #include <plat/mfc.h> +#include <plat/hdmi.h> #include <mach/ohci.h> #include <mach/map.h> @@ -734,6 +735,11 @@ static void __init origen_bt_setup(void) s3c_gpio_setpull(EXYNOS4_GPX2(2), S3C_GPIO_PULL_NONE); } +/* I2C module and id for HDMIPHY */ +static struct i2c_board_info hdmiphy_info = { + I2C_BOARD_INFO("hdmiphy-exynos4210", 0x38), +}; + static void s5p_tv_setup(void) { /* Direct HPD to HDMI chip */ @@ -781,6 +787,7 @@ static void __init origen_machine_init(void) s5p_tv_setup(); s5p_i2c_hdmiphy_set_platdata(NULL); + s5p_hdmi_set_platdata(&hdmiphy_info, NULL, 0); #ifdef CONFIG_DRM_EXYNOS s5p_device_fimd0.dev.platform_data = &drm_fimd_pdata; diff --git a/arch/arm/mach-exynos/mach-smdkv310.c b/arch/arm/mach-exynos/mach-smdkv310.c index 3cfa688d274a..73f2bce097e1 100644 --- a/arch/arm/mach-exynos/mach-smdkv310.c +++ b/arch/arm/mach-exynos/mach-smdkv310.c @@ -40,6 +40,7 @@ #include <plat/mfc.h> #include <plat/ehci.h> #include <plat/clock.h> +#include <plat/hdmi.h> #include <mach/map.h> #include <mach/ohci.h> @@ -354,6 +355,11 @@ static struct platform_pwm_backlight_data smdkv310_bl_data = { .pwm_period_ns = 1000, }; +/* I2C module and id for HDMIPHY */ +static struct i2c_board_info hdmiphy_info = { + I2C_BOARD_INFO("hdmiphy-exynos4210", 0x38), +}; + static void s5p_tv_setup(void) { /* direct HPD to HDMI chip */ @@ -388,6 +394,7 @@ static void __init smdkv310_machine_init(void) s5p_tv_setup(); s5p_i2c_hdmiphy_set_platdata(NULL); + s5p_hdmi_set_platdata(&hdmiphy_info, NULL, 0); samsung_keypad_set_platdata(&smdkv310_keypad_data); diff --git a/arch/arm/mach-gemini/irq.c b/arch/arm/mach-gemini/irq.c index ca70e5fcc7ac..020852d3bdd8 100644 --- a/arch/arm/mach-gemini/irq.c +++ b/arch/arm/mach-gemini/irq.c @@ -17,6 +17,7 @@ #include <linux/sched.h> #include <asm/irq.h> #include <asm/mach/irq.h> +#include <asm/system_misc.h> #include <mach/hardware.h> #define IRQ_SOURCE(base_addr) (base_addr + 0x00) diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index 07f7c226e4cf..d004d37ad9d8 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -9,7 +9,8 @@ obj-$(CONFIG_SOC_IMX27) += clk-imx27.o mm-imx27.o ehci-imx27.o obj-$(CONFIG_SOC_IMX31) += mm-imx3.o cpu-imx31.o clk-imx31.o iomux-imx31.o ehci-imx31.o pm-imx3.o obj-$(CONFIG_SOC_IMX35) += mm-imx3.o cpu-imx35.o clk-imx35.o ehci-imx35.o pm-imx3.o -obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o mm-imx5.o clk-imx51-imx53.o ehci-imx5.o pm-imx5.o cpu_op-mx51.o +imx5-pm-$(CONFIG_PM) += pm-imx5.o +obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o mm-imx5.o clk-imx51-imx53.o ehci-imx5.o $(imx5-pm-y) cpu_op-mx51.o obj-$(CONFIG_COMMON_CLK) += clk-pllv1.o clk-pllv2.o clk-pllv3.o clk-gate2.o \ clk-pfd.o clk-busy.o @@ -70,14 +71,13 @@ obj-$(CONFIG_DEBUG_LL) += lluart.o obj-$(CONFIG_HAVE_IMX_GPC) += gpc.o obj-$(CONFIG_HAVE_IMX_MMDC) += mmdc.o obj-$(CONFIG_HAVE_IMX_SRC) += src.o -obj-$(CONFIG_CPU_V7) += head-v7.o -AFLAGS_head-v7.o :=-Wa,-march=armv7-a -obj-$(CONFIG_SMP) += platsmp.o +AFLAGS_headsmp.o :=-Wa,-march=armv7-a +obj-$(CONFIG_SMP) += headsmp.o platsmp.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o obj-$(CONFIG_SOC_IMX6Q) += clk-imx6q.o mach-imx6q.o ifeq ($(CONFIG_PM),y) -obj-$(CONFIG_SOC_IMX6Q) += pm-imx6q.o +obj-$(CONFIG_SOC_IMX6Q) += pm-imx6q.o headsmp.o endif # i.MX5 based machines diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c index ea89520b6e22..4233d9e3531d 100644 --- a/arch/arm/mach-imx/clk-imx6q.c +++ b/arch/arm/mach-imx/clk-imx6q.c @@ -152,7 +152,7 @@ enum mx6q_clks { ssi2, ssi3, uart_ipg, uart_serial, usboh3, usdhc1, usdhc2, usdhc3, usdhc4, vdo_axi, vpu_axi, cko1, pll1_sys, pll2_bus, pll3_usb_otg, pll4_audio, pll5_video, pll6_mlb, pll7_usb_host, pll8_enet, ssi1_ipg, - ssi2_ipg, ssi3_ipg, rom, usbphy1, usbphy2, + ssi2_ipg, ssi3_ipg, rom, usbphy1, usbphy2, ldb_di0_div_3_5, ldb_di1_div_3_5, clk_max }; @@ -288,8 +288,10 @@ int __init mx6q_clocks_init(void) clk[gpu3d_shader] = imx_clk_divider("gpu3d_shader", "gpu3d_shader_sel", base + 0x18, 29, 3); clk[ipu1_podf] = imx_clk_divider("ipu1_podf", "ipu1_sel", base + 0x3c, 11, 3); clk[ipu2_podf] = imx_clk_divider("ipu2_podf", "ipu2_sel", base + 0x3c, 16, 3); - clk[ldb_di0_podf] = imx_clk_divider("ldb_di0_podf", "ldb_di0_sel", base + 0x20, 10, 1); - clk[ldb_di1_podf] = imx_clk_divider("ldb_di1_podf", "ldb_di1_sel", base + 0x20, 11, 1); + clk[ldb_di0_div_3_5] = imx_clk_fixed_factor("ldb_di0_div_3_5", "ldb_di0_sel", 2, 7); + clk[ldb_di0_podf] = imx_clk_divider("ldb_di0_podf", "ldb_di0_div_3_5", base + 0x20, 10, 1); + clk[ldb_di1_div_3_5] = imx_clk_fixed_factor("ldb_di1_div_3_5", "ldb_di1_sel", 2, 7); + clk[ldb_di1_podf] = imx_clk_divider("ldb_di1_podf", "ldb_di1_div_3_5", base + 0x20, 11, 1); clk[ipu1_di0_pre] = imx_clk_divider("ipu1_di0_pre", "ipu1_di0_pre_sel", base + 0x34, 3, 3); clk[ipu1_di1_pre] = imx_clk_divider("ipu1_di1_pre", "ipu1_di1_pre_sel", base + 0x34, 12, 3); clk[ipu2_di0_pre] = imx_clk_divider("ipu2_di0_pre", "ipu2_di0_pre_sel", base + 0x38, 3, 3); diff --git a/arch/arm/mach-imx/head-v7.S b/arch/arm/mach-imx/headsmp.S index 7e49deb128a4..7e49deb128a4 100644 --- a/arch/arm/mach-imx/head-v7.S +++ b/arch/arm/mach-imx/headsmp.S diff --git a/arch/arm/mach-imx/hotplug.c b/arch/arm/mach-imx/hotplug.c index 20ed2d56c1af..f8f7437c83b8 100644 --- a/arch/arm/mach-imx/hotplug.c +++ b/arch/arm/mach-imx/hotplug.c @@ -42,22 +42,6 @@ static inline void cpu_enter_lowpower(void) : "cc"); } -static inline void cpu_leave_lowpower(void) -{ - unsigned int v; - - asm volatile( - "mrc p15, 0, %0, c1, c0, 0\n" - " orr %0, %0, %1\n" - " mcr p15, 0, %0, c1, c0, 0\n" - " mrc p15, 0, %0, c1, c0, 1\n" - " orr %0, %0, %2\n" - " mcr p15, 0, %0, c1, c0, 1\n" - : "=&r" (v) - : "Ir" (CR_C), "Ir" (0x40) - : "cc"); -} - /* * platform-specific code to shutdown a CPU * @@ -67,11 +51,10 @@ void platform_cpu_die(unsigned int cpu) { cpu_enter_lowpower(); imx_enable_cpu(cpu, false); - cpu_do_idle(); - cpu_leave_lowpower(); - /* We should never return from idle */ - panic("cpu %d unexpectedly exit from shutdown\n", cpu); + /* spin here until hardware takes it down */ + while (1) + ; } int platform_cpu_disable(unsigned int cpu) diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c index 5ec0608f2a76..045b3f6a387d 100644 --- a/arch/arm/mach-imx/mach-imx6q.c +++ b/arch/arm/mach-imx/mach-imx6q.c @@ -71,7 +71,7 @@ soft: /* For imx6q sabrelite board: set KSZ9021RN RGMII pad skew */ static int ksz9021rn_phy_fixup(struct phy_device *phydev) { - if (IS_ENABLED(CONFIG_PHYLIB)) { + if (IS_BUILTIN(CONFIG_PHYLIB)) { /* min rx data delay */ phy_write(phydev, 0x0b, 0x8105); phy_write(phydev, 0x0c, 0x0000); @@ -112,7 +112,7 @@ put_clk: static void __init imx6q_sabrelite_init(void) { - if (IS_ENABLED(CONFIG_PHYLIB)) + if (IS_BUILTIN(CONFIG_PHYLIB)) phy_register_fixup_for_uid(PHY_ID_KSZ9021, MICREL_PHY_ID_MASK, ksz9021rn_phy_fixup); imx6q_sabrelite_cko1_setup(); diff --git a/arch/arm/mach-kirkwood/Makefile.boot b/arch/arm/mach-kirkwood/Makefile.boot index a5717558ee89..a13299d758e1 100644 --- a/arch/arm/mach-kirkwood/Makefile.boot +++ b/arch/arm/mach-kirkwood/Makefile.boot @@ -7,7 +7,8 @@ dtb-$(CONFIG_MACH_DLINK_KIRKWOOD_DT) += kirkwood-dns320.dtb dtb-$(CONFIG_MACH_DLINK_KIRKWOOD_DT) += kirkwood-dns325.dtb dtb-$(CONFIG_MACH_ICONNECT_DT) += kirkwood-iconnect.dtb dtb-$(CONFIG_MACH_IB62X0_DT) += kirkwood-ib62x0.dtb -dtb-$(CONFIG_MACH_TS219_DT) += kirkwood-qnap-ts219.dtb +dtb-$(CONFIG_MACH_TS219_DT) += kirkwood-ts219-6281.dtb +dtb-$(CONFIG_MACH_TS219_DT) += kirkwood-ts219-6282.dtb dtb-$(CONFIG_MACH_GOFLEXNET_DT) += kirkwood-goflexnet.dtb dtb-$(CONFIG_MACH_LSXL_DT) += kirkwood-lschlv2.dtb dtb-$(CONFIG_MACH_LSXL_DT) += kirkwood-lsxhl.dtb diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c index c4b64adcbfce..1201191d7f1b 100644 --- a/arch/arm/mach-kirkwood/common.c +++ b/arch/arm/mach-kirkwood/common.c @@ -301,7 +301,7 @@ void __init kirkwood_ge00_init(struct mv643xx_eth_platform_data *eth_data) { orion_ge00_init(eth_data, GE00_PHYS_BASE, IRQ_KIRKWOOD_GE00_SUM, - IRQ_KIRKWOOD_GE00_ERR); + IRQ_KIRKWOOD_GE00_ERR, 1600); /* The interface forgets the MAC address assigned by u-boot if the clock is turned off, so claim the clk now. */ clk_prepare_enable(ge0); @@ -315,7 +315,7 @@ void __init kirkwood_ge01_init(struct mv643xx_eth_platform_data *eth_data) { orion_ge01_init(eth_data, GE01_PHYS_BASE, IRQ_KIRKWOOD_GE01_SUM, - IRQ_KIRKWOOD_GE01_ERR); + IRQ_KIRKWOOD_GE01_ERR, 1600); clk_prepare_enable(ge1); } @@ -517,6 +517,13 @@ void __init kirkwood_wdt_init(void) void __init kirkwood_init_early(void) { orion_time_set_base(TIMER_VIRT_BASE); + + /* + * Some Kirkwood devices allocate their coherent buffers from atomic + * context. Increase size of atomic coherent pool to make sure such + * the allocations won't fail. + */ + init_dma_coherent_pool_size(SZ_1M); } int kirkwood_tclk; diff --git a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c index d93359379598..be90b7d0e10b 100644 --- a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c +++ b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c @@ -10,6 +10,7 @@ #include <linux/kernel.h> #include <linux/init.h> +#include <linux/sizes.h> #include <linux/platform_device.h> #include <linux/mtd/partitions.h> #include <linux/ata_platform.h> diff --git a/arch/arm/mach-mmp/sram.c b/arch/arm/mach-mmp/sram.c index 4304f9519372..7e8a5a2e1ec7 100644 --- a/arch/arm/mach-mmp/sram.c +++ b/arch/arm/mach-mmp/sram.c @@ -68,7 +68,7 @@ static int __devinit sram_probe(struct platform_device *pdev) struct resource *res; int ret = 0; - if (!pdata && !pdata->pool_name) + if (!pdata || !pdata->pool_name) return -ENODEV; info = kzalloc(sizeof(*info), GFP_KERNEL); diff --git a/arch/arm/mach-mv78xx0/addr-map.c b/arch/arm/mach-mv78xx0/addr-map.c index 62b53d710efd..a9bc84180d21 100644 --- a/arch/arm/mach-mv78xx0/addr-map.c +++ b/arch/arm/mach-mv78xx0/addr-map.c @@ -37,7 +37,7 @@ #define WIN0_OFF(n) (BRIDGE_VIRT_BASE + 0x0000 + ((n) << 4)) #define WIN8_OFF(n) (BRIDGE_VIRT_BASE + 0x0900 + (((n) - 8) << 4)) -static void __init __iomem *win_cfg_base(int win) +static void __init __iomem *win_cfg_base(const struct orion_addr_map_cfg *cfg, int win) { /* * Find the control register base address for this window. diff --git a/arch/arm/mach-mv78xx0/common.c b/arch/arm/mach-mv78xx0/common.c index b4c53b846c9c..3057f7d4329a 100644 --- a/arch/arm/mach-mv78xx0/common.c +++ b/arch/arm/mach-mv78xx0/common.c @@ -213,7 +213,8 @@ void __init mv78xx0_ge00_init(struct mv643xx_eth_platform_data *eth_data) { orion_ge00_init(eth_data, GE00_PHYS_BASE, IRQ_MV78XX0_GE00_SUM, - IRQ_MV78XX0_GE_ERR); + IRQ_MV78XX0_GE_ERR, + MV643XX_TX_CSUM_DEFAULT_LIMIT); } @@ -224,7 +225,8 @@ void __init mv78xx0_ge01_init(struct mv643xx_eth_platform_data *eth_data) { orion_ge01_init(eth_data, GE01_PHYS_BASE, IRQ_MV78XX0_GE01_SUM, - NO_IRQ); + NO_IRQ, + MV643XX_TX_CSUM_DEFAULT_LIMIT); } diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index dd2db025f778..fcd4e85c4ddc 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -62,13 +62,14 @@ config ARCH_OMAP4 select PM_OPP if PM select USB_ARCH_HAS_EHCI if USB_SUPPORT select ARM_CPU_SUSPEND if PM - select ARCH_NEEDS_CPU_IDLE_COUPLED + select ARCH_NEEDS_CPU_IDLE_COUPLED if SMP config SOC_OMAP5 bool "TI OMAP5" select CPU_V7 select ARM_GIC select HAVE_SMP + select ARM_CPU_SUSPEND if PM comment "OMAP Core Type" depends on ARCH_OMAP2 diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c index 74915295482e..28214483aaba 100644 --- a/arch/arm/mach-omap2/board-igep0020.c +++ b/arch/arm/mach-omap2/board-igep0020.c @@ -554,6 +554,8 @@ static const struct usbhs_omap_board_data igep3_usbhs_bdata __initconst = { #ifdef CONFIG_OMAP_MUX static struct omap_board_mux board_mux[] __initdata = { + /* SMSC9221 LAN Controller ETH IRQ (GPIO_176) */ + OMAP3_MUX(MCSPI1_CS2, OMAP_MUX_MODE4 | OMAP_PIN_INPUT), { .reg_offset = OMAP_MUX_TERMINATOR }, }; #endif diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index ef230a0eb5eb..0d362e9f9cb9 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -58,6 +58,7 @@ #include "hsmmc.h" #include "common-board-devices.h" +#define OMAP3_EVM_TS_GPIO 175 #define OMAP3_EVM_EHCI_VBUS 22 #define OMAP3_EVM_EHCI_SELECT 61 diff --git a/arch/arm/mach-omap2/common-board-devices.c b/arch/arm/mach-omap2/common-board-devices.c index 14734746457c..c1875862679f 100644 --- a/arch/arm/mach-omap2/common-board-devices.c +++ b/arch/arm/mach-omap2/common-board-devices.c @@ -35,16 +35,6 @@ static struct omap2_mcspi_device_config ads7846_mcspi_config = { .turbo_mode = 0, }; -/* - * ADS7846 driver maybe request a gpio according to the value - * of pdata->get_pendown_state, but we have done this. So set - * get_pendown_state to avoid twice gpio requesting. - */ -static int omap3_get_pendown_state(void) -{ - return !gpio_get_value(OMAP3_EVM_TS_GPIO); -} - static struct ads7846_platform_data ads7846_config = { .x_max = 0x0fff, .y_max = 0x0fff, @@ -55,7 +45,6 @@ static struct ads7846_platform_data ads7846_config = { .debounce_rep = 1, .gpio_pendown = -EINVAL, .keep_vref_on = 1, - .get_pendown_state = &omap3_get_pendown_state, }; static struct spi_board_info ads7846_spi_board_info __initdata = { diff --git a/arch/arm/mach-omap2/common-board-devices.h b/arch/arm/mach-omap2/common-board-devices.h index 4c4ef6a6166b..a0b4a42836ab 100644 --- a/arch/arm/mach-omap2/common-board-devices.h +++ b/arch/arm/mach-omap2/common-board-devices.h @@ -4,7 +4,6 @@ #include "twl-common.h" #define NAND_BLOCK_SIZE SZ_128K -#define OMAP3_EVM_TS_GPIO 175 struct mtd_partition; struct ads7846_platform_data; diff --git a/arch/arm/mach-omap2/cpuidle44xx.c b/arch/arm/mach-omap2/cpuidle44xx.c index ee05e193fc61..288bee6cbb76 100644 --- a/arch/arm/mach-omap2/cpuidle44xx.c +++ b/arch/arm/mach-omap2/cpuidle44xx.c @@ -238,8 +238,9 @@ int __init omap4_idle_init(void) for_each_cpu(cpu_id, cpu_online_mask) { dev = &per_cpu(omap4_idle_dev, cpu_id); dev->cpu = cpu_id; +#ifdef CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED dev->coupled_cpus = *cpu_online_mask; - +#endif cpuidle_register_driver(&omap4_idle_driver); if (cpuidle_register_device(dev)) { diff --git a/arch/arm/mach-omap2/mux.h b/arch/arm/mach-omap2/mux.h index 471e62a74a16..76f9b3c2f586 100644 --- a/arch/arm/mach-omap2/mux.h +++ b/arch/arm/mach-omap2/mux.h @@ -127,7 +127,6 @@ struct omap_mux_partition { * @gpio: GPIO number * @muxnames: available signal modes for a ball * @balls: available balls on the package - * @partition: mux partition */ struct omap_mux { u16 reg_offset; diff --git a/arch/arm/mach-omap2/opp4xxx_data.c b/arch/arm/mach-omap2/opp4xxx_data.c index 2293ba27101b..c95415da23c2 100644 --- a/arch/arm/mach-omap2/opp4xxx_data.c +++ b/arch/arm/mach-omap2/opp4xxx_data.c @@ -94,7 +94,7 @@ int __init omap4_opp_init(void) { int r = -ENODEV; - if (!cpu_is_omap44xx()) + if (!cpu_is_omap443x()) return r; r = omap_init_opp_table(omap44xx_opp_def_list, diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index e4fc88c65dbd..05bd8f02723f 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -272,21 +272,16 @@ void omap_sram_idle(void) per_next_state = pwrdm_read_next_pwrst(per_pwrdm); core_next_state = pwrdm_read_next_pwrst(core_pwrdm); - if (mpu_next_state < PWRDM_POWER_ON) { - pwrdm_pre_transition(mpu_pwrdm); - pwrdm_pre_transition(neon_pwrdm); - } + pwrdm_pre_transition(NULL); /* PER */ if (per_next_state < PWRDM_POWER_ON) { - pwrdm_pre_transition(per_pwrdm); per_going_off = (per_next_state == PWRDM_POWER_OFF) ? 1 : 0; omap2_gpio_prepare_for_idle(per_going_off); } /* CORE */ if (core_next_state < PWRDM_POWER_ON) { - pwrdm_pre_transition(core_pwrdm); if (core_next_state == PWRDM_POWER_OFF) { omap3_core_save_context(); omap3_cm_save_context(); @@ -339,20 +334,14 @@ void omap_sram_idle(void) omap2_prm_clear_mod_reg_bits(OMAP3430_AUTO_OFF_MASK, OMAP3430_GR_MOD, OMAP3_PRM_VOLTCTRL_OFFSET); - pwrdm_post_transition(core_pwrdm); } omap3_intc_resume_idle(); + pwrdm_post_transition(NULL); + /* PER */ - if (per_next_state < PWRDM_POWER_ON) { + if (per_next_state < PWRDM_POWER_ON) omap2_gpio_resume_after_idle(); - pwrdm_post_transition(per_pwrdm); - } - - if (mpu_next_state < PWRDM_POWER_ON) { - pwrdm_post_transition(mpu_pwrdm); - pwrdm_post_transition(neon_pwrdm); - } } static void omap3_pm_idle(void) diff --git a/arch/arm/mach-omap2/sleep44xx.S b/arch/arm/mach-omap2/sleep44xx.S index 9f6b83d1b193..91e71d8f46f0 100644 --- a/arch/arm/mach-omap2/sleep44xx.S +++ b/arch/arm/mach-omap2/sleep44xx.S @@ -56,9 +56,13 @@ ppa_por_params: * The restore function pointer is stored at CPUx_WAKEUP_NS_PA_ADDR_OFFSET. * It returns to the caller for CPU INACTIVE and ON power states or in case * CPU failed to transition to targeted OFF/DORMANT state. + * + * omap4_finish_suspend() calls v7_flush_dcache_all() which doesn't save + * stack frame and it expects the caller to take care of it. Hence the entire + * stack frame is saved to avoid possible stack corruption. */ ENTRY(omap4_finish_suspend) - stmfd sp!, {lr} + stmfd sp!, {r4-r12, lr} cmp r0, #0x0 beq do_WFI @ No lowpower state, jump to WFI @@ -226,7 +230,7 @@ scu_gp_clear: skip_scu_gp_clear: isb dsb - ldmfd sp!, {pc} + ldmfd sp!, {r4-r12, pc} ENDPROC(omap4_finish_suspend) /* diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c index de47f170ba50..db5ff6642375 100644 --- a/arch/arm/mach-omap2/twl-common.c +++ b/arch/arm/mach-omap2/twl-common.c @@ -67,6 +67,7 @@ void __init omap_pmic_init(int bus, u32 clkrate, const char *pmic_type, int pmic_irq, struct twl4030_platform_data *pmic_data) { + omap_mux_init_signal("sys_nirq", OMAP_PIN_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE); strncpy(pmic_i2c_board_info.type, pmic_type, sizeof(pmic_i2c_board_info.type)); pmic_i2c_board_info.irq = pmic_irq; diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c index 9148b229d0de..410291c67666 100644 --- a/arch/arm/mach-orion5x/common.c +++ b/arch/arm/mach-orion5x/common.c @@ -109,7 +109,8 @@ void __init orion5x_eth_init(struct mv643xx_eth_platform_data *eth_data) { orion_ge00_init(eth_data, ORION5X_ETH_PHYS_BASE, IRQ_ORION5X_ETH_SUM, - IRQ_ORION5X_ETH_ERR); + IRQ_ORION5X_ETH_ERR, + MV643XX_TX_CSUM_DEFAULT_LIMIT); } diff --git a/arch/arm/mach-s3c24xx/include/mach/dma.h b/arch/arm/mach-s3c24xx/include/mach/dma.h index 454831b66037..ee99fd56c043 100644 --- a/arch/arm/mach-s3c24xx/include/mach/dma.h +++ b/arch/arm/mach-s3c24xx/include/mach/dma.h @@ -24,7 +24,8 @@ */ enum dma_ch { - DMACH_XD0, + DMACH_DT_PROP = -1, /* not yet supported, do not use */ + DMACH_XD0 = 0, DMACH_XD1, DMACH_SDI, DMACH_SPI0, diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c index cf10f92856dc..453a6e50db8b 100644 --- a/arch/arm/mach-shmobile/board-armadillo800eva.c +++ b/arch/arm/mach-shmobile/board-armadillo800eva.c @@ -520,13 +520,14 @@ static struct platform_device hdmi_lcdc_device = { }; /* GPIO KEY */ -#define GPIO_KEY(c, g, d) { .code = c, .gpio = g, .desc = d, .active_low = 1 } +#define GPIO_KEY(c, g, d, ...) \ + { .code = c, .gpio = g, .desc = d, .active_low = 1, __VA_ARGS__ } static struct gpio_keys_button gpio_buttons[] = { - GPIO_KEY(KEY_POWER, GPIO_PORT99, "SW1"), - GPIO_KEY(KEY_BACK, GPIO_PORT100, "SW2"), - GPIO_KEY(KEY_MENU, GPIO_PORT97, "SW3"), - GPIO_KEY(KEY_HOME, GPIO_PORT98, "SW4"), + GPIO_KEY(KEY_POWER, GPIO_PORT99, "SW3", .wakeup = 1), + GPIO_KEY(KEY_BACK, GPIO_PORT100, "SW4"), + GPIO_KEY(KEY_MENU, GPIO_PORT97, "SW5"), + GPIO_KEY(KEY_HOME, GPIO_PORT98, "SW6"), }; static struct gpio_keys_platform_data gpio_key_info = { @@ -901,8 +902,8 @@ static struct platform_device *eva_devices[] __initdata = { &camera_device, &ceu0_device, &fsi_device, - &fsi_hdmi_device, &fsi_wm8978_device, + &fsi_hdmi_device, }; static void __init eva_clock_init(void) diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c index 7ea2b31e3199..c129542f6aed 100644 --- a/arch/arm/mach-shmobile/board-mackerel.c +++ b/arch/arm/mach-shmobile/board-mackerel.c @@ -695,6 +695,7 @@ static struct platform_device usbhs0_device = { * - J30 "open" * - modify usbhs1_get_id() USBHS_HOST -> USBHS_GADGET * - add .get_vbus = usbhs_get_vbus in usbhs1_private + * - check usbhs0_device(pio)/usbhs1_device(irq) order in mackerel_devices. */ #define IRQ8 evt2irq(0x0300) #define USB_PHY_MODE (1 << 4) @@ -1325,8 +1326,8 @@ static struct platform_device *mackerel_devices[] __initdata = { &nor_flash_device, &smc911x_device, &lcdc_device, - &usbhs1_device, &usbhs0_device, + &usbhs1_device, &leds_device, &fsi_device, &fsi_ak4643_device, diff --git a/arch/arm/mach-shmobile/board-marzen.c b/arch/arm/mach-shmobile/board-marzen.c index 3a528cf4366c..fcf5a47f4772 100644 --- a/arch/arm/mach-shmobile/board-marzen.c +++ b/arch/arm/mach-shmobile/board-marzen.c @@ -67,7 +67,7 @@ static struct smsc911x_platform_config smsc911x_platdata = { static struct platform_device eth_device = { .name = "smsc911x", - .id = 0, + .id = -1, .dev = { .platform_data = &smsc911x_platdata, }, diff --git a/arch/arm/mach-shmobile/intc-sh73a0.c b/arch/arm/mach-shmobile/intc-sh73a0.c index ee447404c857..588555a67d9c 100644 --- a/arch/arm/mach-shmobile/intc-sh73a0.c +++ b/arch/arm/mach-shmobile/intc-sh73a0.c @@ -259,9 +259,9 @@ static int sh73a0_set_wake(struct irq_data *data, unsigned int on) return 0; /* always allow wakeup */ } -#define RELOC_BASE 0x1000 +#define RELOC_BASE 0x1200 -/* INTCA IRQ pins at INTCS + 0x1000 to make space for GIC+INTC handling */ +/* INTCA IRQ pins at INTCS + RELOC_BASE to make space for GIC+INTC handling */ #define INTCS_VECT_RELOC(n, vect) INTCS_VECT((n), (vect) + RELOC_BASE) INTC_IRQ_PINS_32(intca_irq_pins, 0xe6900000, diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig index 220eb8a8b593..842c0a2d7481 100644 --- a/arch/arm/mach-ux500/Kconfig +++ b/arch/arm/mach-ux500/Kconfig @@ -42,7 +42,6 @@ config MACH_HREFV60 config MACH_SNOWBALL bool "U8500 Snowball platform" select MACH_MOP500 - select LEDS_GPIO help Include support for the snowball development platform. diff --git a/arch/arm/mach-ux500/board-mop500-msp.c b/arch/arm/mach-ux500/board-mop500-msp.c index 996048038743..df15646036aa 100644 --- a/arch/arm/mach-ux500/board-mop500-msp.c +++ b/arch/arm/mach-ux500/board-mop500-msp.c @@ -191,9 +191,9 @@ static struct platform_device *db8500_add_msp_i2s(struct device *parent, return pdev; } -/* Platform device for ASoC U8500 machine */ -static struct platform_device snd_soc_u8500 = { - .name = "snd-soc-u8500", +/* Platform device for ASoC MOP500 machine */ +static struct platform_device snd_soc_mop500 = { + .name = "snd-soc-mop500", .id = 0, .dev = { .platform_data = NULL, @@ -227,8 +227,8 @@ int mop500_msp_init(struct device *parent) { struct platform_device *msp1; - pr_info("%s: Register platform-device 'snd-soc-u8500'.\n", __func__); - platform_device_register(&snd_soc_u8500); + pr_info("%s: Register platform-device 'snd-soc-mop500'.\n", __func__); + platform_device_register(&snd_soc_mop500); pr_info("Initialize MSP I2S-devices.\n"); db8500_add_msp_i2s(parent, 0, U8500_MSP0_BASE, IRQ_DB8500_MSP0, diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index 34359b056e2e..dd629b7f0ecf 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -816,6 +816,7 @@ static void __init u8500_init_machine(void) ARRAY_SIZE(mop500_platform_devs)); mop500_sdi_init(parent); + mop500_msp_init(parent); i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices); i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs); i2c_register_board_info(2, mop500_i2c2_devices, @@ -823,6 +824,8 @@ static void __init u8500_init_machine(void) mop500_uib_init(); + } else if (of_machine_is_compatible("calaosystems,snowball-a9500")) { + mop500_msp_init(parent); } else if (of_machine_is_compatible("st-ericsson,hrefv60+")) { /* * The HREFv60 board removed a GPIO expander and routed @@ -834,6 +837,7 @@ static void __init u8500_init_machine(void) ARRAY_SIZE(mop500_platform_devs)); hrefv60_sdi_init(parent); + mop500_msp_init(parent); i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices); i2c0_devs -= NUM_PRE_V60_I2C0_DEVICES; diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c index 2a8e380501e8..577baf7d0a8d 100644 --- a/arch/arm/mm/cache-l2x0.c +++ b/arch/arm/mm/cache-l2x0.c @@ -554,7 +554,7 @@ static const struct of_device_id l2x0_ids[] __initconst = { int __init l2x0_of_init(u32 aux_val, u32 aux_mask) { struct device_node *np; - struct l2x0_of_data *data; + const struct l2x0_of_data *data; struct resource res; np = of_find_matching_node(NULL, l2x0_ids); diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index 4e7d1182e8a3..051204fc4617 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -267,17 +267,19 @@ static void __dma_free_remap(void *cpu_addr, size_t size) vunmap(cpu_addr); } +#define DEFAULT_DMA_COHERENT_POOL_SIZE SZ_256K + struct dma_pool { size_t size; spinlock_t lock; unsigned long *bitmap; unsigned long nr_pages; void *vaddr; - struct page *page; + struct page **pages; }; static struct dma_pool atomic_pool = { - .size = SZ_256K, + .size = DEFAULT_DMA_COHERENT_POOL_SIZE, }; static int __init early_coherent_pool(char *p) @@ -287,6 +289,21 @@ static int __init early_coherent_pool(char *p) } early_param("coherent_pool", early_coherent_pool); +void __init init_dma_coherent_pool_size(unsigned long size) +{ + /* + * Catch any attempt to set the pool size too late. + */ + BUG_ON(atomic_pool.vaddr); + + /* + * Set architecture specific coherent pool size only if + * it has not been changed by kernel command line parameter. + */ + if (atomic_pool.size == DEFAULT_DMA_COHERENT_POOL_SIZE) + atomic_pool.size = size; +} + /* * Initialise the coherent pool for atomic allocations. */ @@ -297,6 +314,7 @@ static int __init atomic_pool_init(void) unsigned long nr_pages = pool->size >> PAGE_SHIFT; unsigned long *bitmap; struct page *page; + struct page **pages; void *ptr; int bitmap_size = BITS_TO_LONGS(nr_pages) * sizeof(long); @@ -304,21 +322,31 @@ static int __init atomic_pool_init(void) if (!bitmap) goto no_bitmap; + pages = kzalloc(nr_pages * sizeof(struct page *), GFP_KERNEL); + if (!pages) + goto no_pages; + if (IS_ENABLED(CONFIG_CMA)) ptr = __alloc_from_contiguous(NULL, pool->size, prot, &page); else ptr = __alloc_remap_buffer(NULL, pool->size, GFP_KERNEL, prot, &page, NULL); if (ptr) { + int i; + + for (i = 0; i < nr_pages; i++) + pages[i] = page + i; + spin_lock_init(&pool->lock); pool->vaddr = ptr; - pool->page = page; + pool->pages = pages; pool->bitmap = bitmap; pool->nr_pages = nr_pages; pr_info("DMA: preallocated %u KiB pool for atomic coherent allocations\n", (unsigned)pool->size / 1024); return 0; } +no_pages: kfree(bitmap); no_bitmap: pr_err("DMA: failed to allocate %u KiB pool for atomic coherent allocation\n", @@ -443,27 +471,45 @@ static void *__alloc_from_pool(size_t size, struct page **ret_page) if (pageno < pool->nr_pages) { bitmap_set(pool->bitmap, pageno, count); ptr = pool->vaddr + PAGE_SIZE * pageno; - *ret_page = pool->page + pageno; + *ret_page = pool->pages[pageno]; + } else { + pr_err_once("ERROR: %u KiB atomic DMA coherent pool is too small!\n" + "Please increase it with coherent_pool= kernel parameter!\n", + (unsigned)pool->size / 1024); } spin_unlock_irqrestore(&pool->lock, flags); return ptr; } +static bool __in_atomic_pool(void *start, size_t size) +{ + struct dma_pool *pool = &atomic_pool; + void *end = start + size; + void *pool_start = pool->vaddr; + void *pool_end = pool->vaddr + pool->size; + + if (start < pool_start || start > pool_end) + return false; + + if (end <= pool_end) + return true; + + WARN(1, "Wrong coherent size(%p-%p) from atomic pool(%p-%p)\n", + start, end - 1, pool_start, pool_end - 1); + + return false; +} + static int __free_from_pool(void *start, size_t size) { struct dma_pool *pool = &atomic_pool; unsigned long pageno, count; unsigned long flags; - if (start < pool->vaddr || start > pool->vaddr + pool->size) + if (!__in_atomic_pool(start, size)) return 0; - if (start + size > pool->vaddr + pool->size) { - WARN(1, "freeing wrong coherent size from pool\n"); - return 0; - } - pageno = (start - pool->vaddr) >> PAGE_SHIFT; count = size >> PAGE_SHIFT; @@ -1090,10 +1136,22 @@ static int __iommu_remove_mapping(struct device *dev, dma_addr_t iova, size_t si return 0; } +static struct page **__atomic_get_pages(void *addr) +{ + struct dma_pool *pool = &atomic_pool; + struct page **pages = pool->pages; + int offs = (addr - pool->vaddr) >> PAGE_SHIFT; + + return pages + offs; +} + static struct page **__iommu_get_pages(void *cpu_addr, struct dma_attrs *attrs) { struct vm_struct *area; + if (__in_atomic_pool(cpu_addr, PAGE_SIZE)) + return __atomic_get_pages(cpu_addr); + if (dma_get_attr(DMA_ATTR_NO_KERNEL_MAPPING, attrs)) return cpu_addr; @@ -1103,6 +1161,34 @@ static struct page **__iommu_get_pages(void *cpu_addr, struct dma_attrs *attrs) return NULL; } +static void *__iommu_alloc_atomic(struct device *dev, size_t size, + dma_addr_t *handle) +{ + struct page *page; + void *addr; + + addr = __alloc_from_pool(size, &page); + if (!addr) + return NULL; + + *handle = __iommu_create_mapping(dev, &page, size); + if (*handle == DMA_ERROR_CODE) + goto err_mapping; + + return addr; + +err_mapping: + __free_from_pool(addr, size); + return NULL; +} + +static void __iommu_free_atomic(struct device *dev, struct page **pages, + dma_addr_t handle, size_t size) +{ + __iommu_remove_mapping(dev, handle, size); + __free_from_pool(page_address(pages[0]), size); +} + static void *arm_iommu_alloc_attrs(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp, struct dma_attrs *attrs) { @@ -1113,6 +1199,9 @@ static void *arm_iommu_alloc_attrs(struct device *dev, size_t size, *handle = DMA_ERROR_CODE; size = PAGE_ALIGN(size); + if (gfp & GFP_ATOMIC) + return __iommu_alloc_atomic(dev, size, handle); + pages = __iommu_alloc_buffer(dev, size, gfp); if (!pages) return NULL; @@ -1179,6 +1268,11 @@ void arm_iommu_free_attrs(struct device *dev, size_t size, void *cpu_addr, return; } + if (__in_atomic_pool(cpu_addr, size)) { + __iommu_free_atomic(dev, pages, handle, size); + return; + } + if (!dma_get_attr(DMA_ATTR_NO_KERNEL_MAPPING, attrs)) { unmap_kernel_range((unsigned long)cpu_addr, size); vunmap(cpu_addr); diff --git a/arch/arm/mm/flush.c b/arch/arm/mm/flush.c index 77458548e031..40ca11ed6e5f 100644 --- a/arch/arm/mm/flush.c +++ b/arch/arm/mm/flush.c @@ -231,8 +231,6 @@ void __sync_icache_dcache(pte_t pteval) struct page *page; struct address_space *mapping; - if (!pte_present_user(pteval)) - return; if (cache_is_vipt_nonaliasing() && !pte_exec(pteval)) /* only flush non-aliasing VIPT caches for exec mappings */ return; diff --git a/arch/arm/mm/tlb-v7.S b/arch/arm/mm/tlb-v7.S index c2021139cb56..ea94765acf9a 100644 --- a/arch/arm/mm/tlb-v7.S +++ b/arch/arm/mm/tlb-v7.S @@ -38,10 +38,10 @@ ENTRY(v7wbi_flush_user_tlb_range) dsb mov r0, r0, lsr #PAGE_SHIFT @ align address mov r1, r1, lsr #PAGE_SHIFT -#ifdef CONFIG_ARM_ERRATA_720789 - mov r3, #0 -#else asid r3, r3 @ mask ASID +#ifdef CONFIG_ARM_ERRATA_720789 + ALT_SMP(W(mov) r3, #0 ) + ALT_UP(W(nop) ) #endif orr r0, r3, r0, lsl #PAGE_SHIFT @ Create initial MVA mov r1, r1, lsl #PAGE_SHIFT diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c index 626ad8cad7a9..938b50a33439 100644 --- a/arch/arm/plat-omap/dmtimer.c +++ b/arch/arm/plat-omap/dmtimer.c @@ -189,6 +189,7 @@ struct omap_dm_timer *omap_dm_timer_request(void) timer->reserved = 1; break; } + spin_unlock_irqrestore(&dm_timer_lock, flags); if (timer) { ret = omap_dm_timer_prepare(timer); @@ -197,7 +198,6 @@ struct omap_dm_timer *omap_dm_timer_request(void) timer = NULL; } } - spin_unlock_irqrestore(&dm_timer_lock, flags); if (!timer) pr_debug("%s: timer request failed!\n", __func__); @@ -220,6 +220,7 @@ struct omap_dm_timer *omap_dm_timer_request_specific(int id) break; } } + spin_unlock_irqrestore(&dm_timer_lock, flags); if (timer) { ret = omap_dm_timer_prepare(timer); @@ -228,7 +229,6 @@ struct omap_dm_timer *omap_dm_timer_request_specific(int id) timer = NULL; } } - spin_unlock_irqrestore(&dm_timer_lock, flags); if (!timer) pr_debug("%s: timer%d request failed!\n", __func__, id); @@ -258,7 +258,7 @@ EXPORT_SYMBOL_GPL(omap_dm_timer_enable); void omap_dm_timer_disable(struct omap_dm_timer *timer) { - pm_runtime_put(&timer->pdev->dev); + pm_runtime_put_sync(&timer->pdev->dev); } EXPORT_SYMBOL_GPL(omap_dm_timer_disable); diff --git a/arch/arm/plat-omap/include/plat/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h index 68b180edcfff..bb5d08a70dbc 100644 --- a/arch/arm/plat-omap/include/plat/cpu.h +++ b/arch/arm/plat-omap/include/plat/cpu.h @@ -372,7 +372,8 @@ IS_OMAP_TYPE(3430, 0x3430) #define cpu_class_is_omap1() (cpu_is_omap7xx() || cpu_is_omap15xx() || \ cpu_is_omap16xx()) #define cpu_class_is_omap2() (cpu_is_omap24xx() || cpu_is_omap34xx() || \ - cpu_is_omap44xx() || soc_is_omap54xx()) + cpu_is_omap44xx() || soc_is_omap54xx() || \ + soc_is_am33xx()) /* Various silicon revisions for omap2 */ #define OMAP242X_CLASS 0x24200024 diff --git a/arch/arm/plat-omap/include/plat/multi.h b/arch/arm/plat-omap/include/plat/multi.h index 045e320f1067..324d31b14852 100644 --- a/arch/arm/plat-omap/include/plat/multi.h +++ b/arch/arm/plat-omap/include/plat/multi.h @@ -108,4 +108,13 @@ # endif #endif +#ifdef CONFIG_SOC_AM33XX +# ifdef OMAP_NAME +# undef MULTI_OMAP2 +# define MULTI_OMAP2 +# else +# define OMAP_NAME am33xx +# endif +#endif + #endif /* __PLAT_OMAP_MULTI_H */ diff --git a/arch/arm/plat-omap/include/plat/uncompress.h b/arch/arm/plat-omap/include/plat/uncompress.h index b8d19a136781..7f7b112acccb 100644 --- a/arch/arm/plat-omap/include/plat/uncompress.h +++ b/arch/arm/plat-omap/include/plat/uncompress.h @@ -110,7 +110,7 @@ static inline void flush(void) _DEBUG_LL_ENTRY(mach, AM33XX_UART##p##_BASE, OMAP_PORT_SHIFT, \ AM33XXUART##p) -static inline void __arch_decomp_setup(unsigned long arch_id) +static inline void arch_decomp_setup(void) { int port = 0; @@ -198,8 +198,6 @@ static inline void __arch_decomp_setup(unsigned long arch_id) } while (0); } -#define arch_decomp_setup() __arch_decomp_setup(arch_id) - /* * nothing to do */ diff --git a/arch/arm/plat-orion/common.c b/arch/arm/plat-orion/common.c index d245a87dc014..b8b747a9d360 100644 --- a/arch/arm/plat-orion/common.c +++ b/arch/arm/plat-orion/common.c @@ -291,10 +291,12 @@ static struct platform_device orion_ge00 = { void __init orion_ge00_init(struct mv643xx_eth_platform_data *eth_data, unsigned long mapbase, unsigned long irq, - unsigned long irq_err) + unsigned long irq_err, + unsigned int tx_csum_limit) { fill_resources(&orion_ge00_shared, orion_ge00_shared_resources, mapbase + 0x2000, SZ_16K - 1, irq_err); + orion_ge00_shared_data.tx_csum_limit = tx_csum_limit; ge_complete(&orion_ge00_shared_data, orion_ge00_resources, irq, &orion_ge00_shared, eth_data, &orion_ge00); @@ -343,10 +345,12 @@ static struct platform_device orion_ge01 = { void __init orion_ge01_init(struct mv643xx_eth_platform_data *eth_data, unsigned long mapbase, unsigned long irq, - unsigned long irq_err) + unsigned long irq_err, + unsigned int tx_csum_limit) { fill_resources(&orion_ge01_shared, orion_ge01_shared_resources, mapbase + 0x2000, SZ_16K - 1, irq_err); + orion_ge01_shared_data.tx_csum_limit = tx_csum_limit; ge_complete(&orion_ge01_shared_data, orion_ge01_resources, irq, &orion_ge01_shared, eth_data, &orion_ge01); diff --git a/arch/arm/plat-orion/include/plat/common.h b/arch/arm/plat-orion/include/plat/common.h index e00fdb213609..ae2377ef63e5 100644 --- a/arch/arm/plat-orion/include/plat/common.h +++ b/arch/arm/plat-orion/include/plat/common.h @@ -39,12 +39,14 @@ void __init orion_rtc_init(unsigned long mapbase, void __init orion_ge00_init(struct mv643xx_eth_platform_data *eth_data, unsigned long mapbase, unsigned long irq, - unsigned long irq_err); + unsigned long irq_err, + unsigned int tx_csum_limit); void __init orion_ge01_init(struct mv643xx_eth_platform_data *eth_data, unsigned long mapbase, unsigned long irq, - unsigned long irq_err); + unsigned long irq_err, + unsigned int tx_csum_limit); void __init orion_ge10_init(struct mv643xx_eth_platform_data *eth_data, unsigned long mapbase, diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c index 28f898f75380..db98e7021f0d 100644 --- a/arch/arm/plat-s3c24xx/dma.c +++ b/arch/arm/plat-s3c24xx/dma.c @@ -430,7 +430,7 @@ s3c2410_dma_canload(struct s3c2410_dma_chan *chan) * when necessary. */ -int s3c2410_dma_enqueue(unsigned int channel, void *id, +int s3c2410_dma_enqueue(enum dma_ch channel, void *id, dma_addr_t data, int size) { struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c index 74e31ce35538..fc49f3dabd76 100644 --- a/arch/arm/plat-samsung/devs.c +++ b/arch/arm/plat-samsung/devs.c @@ -32,6 +32,8 @@ #include <linux/platform_data/s3c-hsudc.h> #include <linux/platform_data/s3c-hsotg.h> +#include <media/s5p_hdmi.h> + #include <asm/irq.h> #include <asm/pmu.h> #include <asm/mach/arch.h> @@ -748,7 +750,8 @@ void __init s5p_i2c_hdmiphy_set_platdata(struct s3c2410_platform_i2c *pd) if (!pd) { pd = &default_i2c_data; - if (soc_is_exynos4210()) + if (soc_is_exynos4210() || + soc_is_exynos4212() || soc_is_exynos4412()) pd->bus_num = 8; else if (soc_is_s5pv210()) pd->bus_num = 3; @@ -759,6 +762,30 @@ void __init s5p_i2c_hdmiphy_set_platdata(struct s3c2410_platform_i2c *pd) npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c), &s5p_device_i2c_hdmiphy); } + +struct s5p_hdmi_platform_data s5p_hdmi_def_platdata; + +void __init s5p_hdmi_set_platdata(struct i2c_board_info *hdmiphy_info, + struct i2c_board_info *mhl_info, int mhl_bus) +{ + struct s5p_hdmi_platform_data *pd = &s5p_hdmi_def_platdata; + + if (soc_is_exynos4210() || + soc_is_exynos4212() || soc_is_exynos4412()) + pd->hdmiphy_bus = 8; + else if (soc_is_s5pv210()) + pd->hdmiphy_bus = 3; + else + pd->hdmiphy_bus = 0; + + pd->hdmiphy_info = hdmiphy_info; + pd->mhl_info = mhl_info; + pd->mhl_bus = mhl_bus; + + s3c_set_platdata(pd, sizeof(struct s5p_hdmi_platform_data), + &s5p_device_hdmi); +} + #endif /* CONFIG_S5P_DEV_I2C_HDMIPHY */ /* I2S */ diff --git a/arch/arm/plat-samsung/include/plat/hdmi.h b/arch/arm/plat-samsung/include/plat/hdmi.h new file mode 100644 index 000000000000..331d046ac2c5 --- /dev/null +++ b/arch/arm/plat-samsung/include/plat/hdmi.h @@ -0,0 +1,16 @@ +/* + * Copyright (C) 2012 Samsung Electronics Co.Ltd + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifndef __PLAT_SAMSUNG_HDMI_H +#define __PLAT_SAMSUNG_HDMI_H __FILE__ + +extern void s5p_hdmi_set_platdata(struct i2c_board_info *hdmiphy_info, + struct i2c_board_info *mhl_info, int mhl_bus); + +#endif /* __PLAT_SAMSUNG_HDMI_H */ diff --git a/arch/arm/plat-samsung/pm.c b/arch/arm/plat-samsung/pm.c index 64ab65f0fdbc..15070284343e 100644 --- a/arch/arm/plat-samsung/pm.c +++ b/arch/arm/plat-samsung/pm.c @@ -74,7 +74,7 @@ unsigned char pm_uart_udivslot; #ifdef CONFIG_SAMSUNG_PM_DEBUG -struct pm_uart_save uart_save[CONFIG_SERIAL_SAMSUNG_UARTS]; +static struct pm_uart_save uart_save[CONFIG_SERIAL_SAMSUNG_UARTS]; static void s3c_pm_save_uart(unsigned int uart, struct pm_uart_save *save) { diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c index fb849d044bde..c834b32af275 100644 --- a/arch/arm/vfp/vfpmodule.c +++ b/arch/arm/vfp/vfpmodule.c @@ -719,8 +719,10 @@ static int __init vfp_init(void) if ((fmrx(MVFR1) & 0x000fff00) == 0x00011100) elf_hwcap |= HWCAP_NEON; #endif +#ifdef CONFIG_VFPv3 if ((fmrx(MVFR1) & 0xf0000000) == 0x10000000) elf_hwcap |= HWCAP_VFPv4; +#endif } } return 0; |