diff options
Diffstat (limited to 'arch')
80 files changed, 268 insertions, 199 deletions
diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig index 99d2845f3feb..4092bec198be 100644 --- a/arch/arc/Kconfig +++ b/arch/arc/Kconfig @@ -6,7 +6,6 @@ config ARC def_bool y select ARC_TIMERS - select ARCH_HAS_CPU_CACHE_ALIASING select ARCH_HAS_CACHE_LINE_SIZE select ARCH_HAS_DEBUG_VM_PGTABLE select ARCH_HAS_DMA_PREP_COHERENT diff --git a/arch/arc/boot/Makefile b/arch/arc/boot/Makefile index 5648748c285f..5a8550124b73 100644 --- a/arch/arc/boot/Makefile +++ b/arch/arc/boot/Makefile @@ -1,8 +1,8 @@ # SPDX-License-Identifier: GPL-2.0 -# uImage build relies on mkimage being availble on your host for ARC target +# uImage build relies on mkimage being available on your host for ARC target # You will need to build u-boot for ARC, rename mkimage to arc-elf32-mkimage -# and make sure it's reacable from your PATH +# and make sure it's reachable from your PATH OBJCOPYFLAGS= -O binary -R .note -R .note.gnu.build-id -R .comment -S diff --git a/arch/arc/boot/dts/axc003.dtsi b/arch/arc/boot/dts/axc003.dtsi index 3434c8131ecd..c0a812674ce9 100644 --- a/arch/arc/boot/dts/axc003.dtsi +++ b/arch/arc/boot/dts/axc003.dtsi @@ -119,9 +119,9 @@ /* * The DW APB ICTL intc on MB is connected to CPU intc via a * DT "invisible" DW APB GPIO block, configured to simply pass thru - * interrupts - setup accordinly in platform init (plat-axs10x/ax10x.c) + * interrupts - setup accordingly in platform init (plat-axs10x/ax10x.c) * - * So here we mimic a direct connection betwen them, ignoring the + * So here we mimic a direct connection between them, ignoring the * ABPG GPIO. Thus set "interrupts = <24>" (DW APB GPIO to core) * instead of "interrupts = <12>" (DW APB ICTL to DW APB GPIO) * diff --git a/arch/arc/boot/dts/hsdk.dts b/arch/arc/boot/dts/hsdk.dts index 6691f4255077..41b980df862b 100644 --- a/arch/arc/boot/dts/hsdk.dts +++ b/arch/arc/boot/dts/hsdk.dts @@ -205,7 +205,6 @@ }; gmac: ethernet@8000 { - #interrupt-cells = <1>; compatible = "snps,dwmac"; reg = <0x8000 0x2000>; interrupts = <10>; diff --git a/arch/arc/boot/dts/vdk_axs10x_mb.dtsi b/arch/arc/boot/dts/vdk_axs10x_mb.dtsi index 90a412026e64..0e0e2d337bf8 100644 --- a/arch/arc/boot/dts/vdk_axs10x_mb.dtsi +++ b/arch/arc/boot/dts/vdk_axs10x_mb.dtsi @@ -113,7 +113,7 @@ /* * Embedded Vision subsystem UIO mappings; only relevant for EV VDK * - * This node is intentionally put outside of MB above becase + * This node is intentionally put outside of MB above because * it maps areas outside of MB's 0xez-0xfz. */ uio_ev: uio@d0000000 { diff --git a/arch/arc/include/asm/cachetype.h b/arch/arc/include/asm/cachetype.h deleted file mode 100644 index 05fc7ed59712..000000000000 --- a/arch/arc/include/asm/cachetype.h +++ /dev/null @@ -1,9 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef __ASM_ARC_CACHETYPE_H -#define __ASM_ARC_CACHETYPE_H - -#include <linux/types.h> - -#define cpu_dcache_is_aliasing() true - -#endif diff --git a/arch/arc/include/asm/dsp.h b/arch/arc/include/asm/dsp.h index 202c78e56704..f496dbc4640b 100644 --- a/arch/arc/include/asm/dsp.h +++ b/arch/arc/include/asm/dsp.h @@ -12,7 +12,7 @@ /* * DSP-related saved registers - need to be saved only when you are * scheduled out. - * structure fields name must correspond to aux register defenitions for + * structure fields name must correspond to aux register definitions for * automatic offset calculation in DSP_AUX_SAVE_RESTORE macros */ struct dsp_callee_regs { diff --git a/arch/arc/include/asm/entry-compact.h b/arch/arc/include/asm/entry-compact.h index 92c3e9f13252..00946fe04c9b 100644 --- a/arch/arc/include/asm/entry-compact.h +++ b/arch/arc/include/asm/entry-compact.h @@ -7,7 +7,7 @@ * Stack switching code can no longer reliably rely on the fact that * if we are NOT in user mode, stack is switched to kernel mode. * e.g. L2 IRQ interrupted a L1 ISR which had not yet completed - * it's prologue including stack switching from user mode + * its prologue including stack switching from user mode * * Vineetg: Aug 28th 2008: Bug #94984 * -Zero Overhead Loop Context shd be cleared when entering IRQ/EXcp/Trap @@ -143,7 +143,7 @@ * 2. L1 IRQ taken, ISR starts (CPU auto-switched to KERNEL mode) * 3. But before it could switch SP from USER to KERNEL stack * a L2 IRQ "Interrupts" L1 - * Thay way although L2 IRQ happened in Kernel mode, stack is still + * That way although L2 IRQ happened in Kernel mode, stack is still * not switched. * To handle this, we may need to switch stack even if in kernel mode * provided SP has values in range of USER mode stack ( < 0x7000_0000 ) @@ -173,7 +173,7 @@ GET_CURR_TASK_ON_CPU r9 - /* With current tsk in r9, get it's kernel mode stack base */ + /* With current tsk in r9, get its kernel mode stack base */ GET_TSK_STACK_BASE r9, r9 /* save U mode SP @ pt_regs->sp */ @@ -282,7 +282,7 @@ * NOTE: * * It is recommended that lp_count/ilink1/ilink2 not be used as a dest reg - * for memory load operations. If used in that way interrupts are deffered + * for memory load operations. If used in that way interrupts are deferred * by hardware and that is not good. *-------------------------------------------------------------*/ .macro EXCEPTION_EPILOGUE @@ -350,7 +350,7 @@ * NOTE: * * It is recommended that lp_count/ilink1/ilink2 not be used as a dest reg - * for memory load operations. If used in that way interrupts are deffered + * for memory load operations. If used in that way interrupts are deferred * by hardware and that is not good. *-------------------------------------------------------------*/ .macro INTERRUPT_EPILOGUE LVL diff --git a/arch/arc/include/asm/entry.h b/arch/arc/include/asm/entry.h index cf1ba376e992..38c35722cebf 100644 --- a/arch/arc/include/asm/entry.h +++ b/arch/arc/include/asm/entry.h @@ -7,7 +7,7 @@ #ifndef __ASM_ARC_ENTRY_H #define __ASM_ARC_ENTRY_H -#include <asm/unistd.h> /* For NR_syscalls defination */ +#include <asm/unistd.h> /* For NR_syscalls definition */ #include <asm/arcregs.h> #include <asm/ptrace.h> #include <asm/processor.h> /* For VMALLOC_START */ @@ -56,7 +56,7 @@ .endm /*------------------------------------------------------------- - * given a tsk struct, get to the base of it's kernel mode stack + * given a tsk struct, get to the base of its kernel mode stack * tsk->thread_info is really a PAGE, whose bottom hoists stack * which grows upwards towards thread_info *------------------------------------------------------------*/ diff --git a/arch/arc/include/asm/irq.h b/arch/arc/include/asm/irq.h index c574712ad865..9cd79263acba 100644 --- a/arch/arc/include/asm/irq.h +++ b/arch/arc/include/asm/irq.h @@ -10,7 +10,7 @@ * ARCv2 can support 240 interrupts in the core interrupts controllers and * 128 interrupts in IDU. Thus 512 virtual IRQs must be enough for most * configurations of boards. - * This doesnt affect ARCompact, but we change it to same value + * This doesn't affect ARCompact, but we change it to same value */ #define NR_IRQS 512 diff --git a/arch/arc/include/asm/irqflags-compact.h b/arch/arc/include/asm/irqflags-compact.h index 0d63e568d64c..936a2f21f315 100644 --- a/arch/arc/include/asm/irqflags-compact.h +++ b/arch/arc/include/asm/irqflags-compact.h @@ -46,7 +46,7 @@ * IRQ Control Macros * * All of them have "memory" clobber (compiler barrier) which is needed to - * ensure that LD/ST requiring irq safetly (R-M-W when LLSC is not available) + * ensure that LD/ST requiring irq safety (R-M-W when LLSC is not available) * are redone after IRQs are re-enabled (and gcc doesn't reuse stale register) * * Noted at the time of Abilis Timer List corruption diff --git a/arch/arc/include/asm/mmu_context.h b/arch/arc/include/asm/mmu_context.h index dda471f5f05b..9963bb1a5733 100644 --- a/arch/arc/include/asm/mmu_context.h +++ b/arch/arc/include/asm/mmu_context.h @@ -165,7 +165,7 @@ static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, * for retiring-mm. However destroy_context( ) still needs to do that because * between mm_release( ) = >deactive_mm( ) and * mmput => .. => __mmdrop( ) => destroy_context( ) - * there is a good chance that task gets sched-out/in, making it's ASID valid + * there is a good chance that task gets sched-out/in, making its ASID valid * again (this teased me for a whole day). */ diff --git a/arch/arc/include/asm/pgtable-bits-arcv2.h b/arch/arc/include/asm/pgtable-bits-arcv2.h index f3eea3f30b2e..8ebec1b21d24 100644 --- a/arch/arc/include/asm/pgtable-bits-arcv2.h +++ b/arch/arc/include/asm/pgtable-bits-arcv2.h @@ -66,7 +66,7 @@ * Other rules which cause the divergence from 1:1 mapping * * 1. Although ARC700 can do exclusive execute/write protection (meaning R - * can be tracked independet of X/W unlike some other CPUs), still to + * can be tracked independently of X/W unlike some other CPUs), still to * keep things consistent with other archs: * -Write implies Read: W => R * -Execute implies Read: X => R diff --git a/arch/arc/include/asm/ptrace.h b/arch/arc/include/asm/ptrace.h index 00b9318e551e..cf79df0b2570 100644 --- a/arch/arc/include/asm/ptrace.h +++ b/arch/arc/include/asm/ptrace.h @@ -169,7 +169,7 @@ static inline unsigned long regs_get_register(struct pt_regs *regs, return *(unsigned long *)((unsigned long)regs + offset); } -extern int syscall_trace_entry(struct pt_regs *); +extern int syscall_trace_enter(struct pt_regs *); extern void syscall_trace_exit(struct pt_regs *); #endif /* !__ASSEMBLY__ */ diff --git a/arch/arc/include/asm/shmparam.h b/arch/arc/include/asm/shmparam.h index 8b0251464ffd..719112af0f41 100644 --- a/arch/arc/include/asm/shmparam.h +++ b/arch/arc/include/asm/shmparam.h @@ -6,7 +6,7 @@ #ifndef __ARC_ASM_SHMPARAM_H #define __ARC_ASM_SHMPARAM_H -/* Handle upto 2 cache bins */ +/* Handle up to 2 cache bins */ #define SHMLBA (2 * PAGE_SIZE) /* Enforce SHMLBA in shmat */ diff --git a/arch/arc/include/asm/smp.h b/arch/arc/include/asm/smp.h index e0913f52c2cd..990f834909f0 100644 --- a/arch/arc/include/asm/smp.h +++ b/arch/arc/include/asm/smp.h @@ -77,7 +77,7 @@ static inline const char *arc_platform_smp_cpuinfo(void) /* * ARC700 doesn't support atomic Read-Modify-Write ops. - * Originally Interrupts had to be disabled around code to gaurantee atomicity. + * Originally Interrupts had to be disabled around code to guarantee atomicity. * The LLOCK/SCOND insns allow writing interrupt-hassle-free based atomic ops * based on retry-if-irq-in-atomic (with hardware assist). * However despite these, we provide the IRQ disabling variant @@ -86,7 +86,7 @@ static inline const char *arc_platform_smp_cpuinfo(void) * support needed. * * (2) In a SMP setup, the LLOCK/SCOND atomicity across CPUs needs to be - * gaurantted by the platform (not something which core handles). + * guaranteed by the platform (not something which core handles). * Assuming a platform won't, SMP Linux needs to use spinlocks + local IRQ * disabling for atomicity. * diff --git a/arch/arc/include/asm/thread_info.h b/arch/arc/include/asm/thread_info.h index 4c530cf131f3..12daaf3a61ea 100644 --- a/arch/arc/include/asm/thread_info.h +++ b/arch/arc/include/asm/thread_info.h @@ -38,7 +38,7 @@ struct thread_info { unsigned long flags; /* low level flags */ unsigned long ksp; /* kernel mode stack top in __switch_to */ - int preempt_count; /* 0 => preemptable, <0 => BUG */ + int preempt_count; /* 0 => preemptible, <0 => BUG */ int cpu; /* current CPU */ unsigned long thr_ptr; /* TLS ptr */ struct task_struct *task; /* main task structure */ diff --git a/arch/arc/include/uapi/asm/swab.h b/arch/arc/include/uapi/asm/swab.h index 02109cd48ee1..8d1f1ef44ba7 100644 --- a/arch/arc/include/uapi/asm/swab.h +++ b/arch/arc/include/uapi/asm/swab.h @@ -62,7 +62,7 @@ * 8051fdc4: st r2,[r1,20] ; Mem op : save result back to mem * * Joern suggested a better "C" algorithm which is great since - * (1) It is portable to any architecure + * (1) It is portable to any architecture * (2) At the same time it takes advantage of ARC ISA (rotate intrns) */ diff --git a/arch/arc/kernel/entry-arcv2.S b/arch/arc/kernel/entry-arcv2.S index 2e49c81c8086..e238b5fd3c8c 100644 --- a/arch/arc/kernel/entry-arcv2.S +++ b/arch/arc/kernel/entry-arcv2.S @@ -5,7 +5,7 @@ * Copyright (C) 2013 Synopsys, Inc. (www.synopsys.com) */ -#include <linux/linkage.h> /* ARC_{EXTRY,EXIT} */ +#include <linux/linkage.h> /* ARC_{ENTRY,EXIT} */ #include <asm/entry.h> /* SAVE_ALL_{INT1,INT2,TRAP...} */ #include <asm/errno.h> #include <asm/arcregs.h> @@ -31,7 +31,7 @@ VECTOR res_service ; Reset Vector VECTOR mem_service ; Mem exception VECTOR instr_service ; Instrn Error VECTOR EV_MachineCheck ; Fatal Machine check -VECTOR EV_TLBMissI ; Intruction TLB miss +VECTOR EV_TLBMissI ; Instruction TLB miss VECTOR EV_TLBMissD ; Data TLB miss VECTOR EV_TLBProtV ; Protection Violation VECTOR EV_PrivilegeV ; Privilege Violation @@ -76,11 +76,11 @@ ENTRY(handle_interrupt) # query in hard ISR path would return false (since .IE is set) which would # trips genirq interrupt handling asserts. # - # So do a "soft" disable of interrutps here. + # So do a "soft" disable of interrupts here. # # Note this disable is only for consistent book-keeping as further interrupts # will be disabled anyways even w/o this. Hardware tracks active interrupts - # seperately in AUX_IRQ_ACT.active and will not take new interrupts + # separately in AUX_IRQ_ACT.active and will not take new interrupts # unless this one returns (or higher prio becomes pending in 2-prio scheme) IRQ_DISABLE diff --git a/arch/arc/kernel/entry.S b/arch/arc/kernel/entry.S index 089f6680518f..3c7e74aba679 100644 --- a/arch/arc/kernel/entry.S +++ b/arch/arc/kernel/entry.S @@ -95,7 +95,7 @@ ENTRY(EV_MachineCheck) lr r0, [efa] mov r1, sp - ; MC excpetions disable MMU + ; MC exceptions disable MMU ARC_MMU_REENABLE r3 lsr r3, r10, 8 @@ -209,7 +209,7 @@ trap_with_param: ; --------------------------------------------- ; syscall TRAP -; ABI: (r0-r7) upto 8 args, (r8) syscall number +; ABI: (r0-r7) up to 8 args, (r8) syscall number ; --------------------------------------------- ENTRY(EV_Trap) diff --git a/arch/arc/kernel/head.S b/arch/arc/kernel/head.S index 9152782444b5..8d541f53fae3 100644 --- a/arch/arc/kernel/head.S +++ b/arch/arc/kernel/head.S @@ -165,7 +165,7 @@ ENTRY(first_lines_of_secondary) ; setup stack (fp, sp) mov fp, 0 - ; set it's stack base to tsk->thread_info bottom + ; set its stack base to tsk->thread_info bottom GET_TSK_STACK_BASE r0, sp j start_kernel_secondary diff --git a/arch/arc/kernel/intc-arcv2.c b/arch/arc/kernel/intc-arcv2.c index 678898757e47..f324f0e3341a 100644 --- a/arch/arc/kernel/intc-arcv2.c +++ b/arch/arc/kernel/intc-arcv2.c @@ -56,7 +56,7 @@ void arc_init_IRQ(void) WRITE_AUX(AUX_IRQ_CTRL, ictrl); /* - * ARCv2 core intc provides multiple interrupt priorities (upto 16). + * ARCv2 core intc provides multiple interrupt priorities (up to 16). * Typical builds though have only two levels (0-high, 1-low) * Linux by default uses lower prio 1 for most irqs, reserving 0 for * NMI style interrupts in future (say perf) diff --git a/arch/arc/kernel/kprobes.c b/arch/arc/kernel/kprobes.c index e71d64119d71..f8e2960832d9 100644 --- a/arch/arc/kernel/kprobes.c +++ b/arch/arc/kernel/kprobes.c @@ -190,7 +190,8 @@ static void __kprobes setup_singlestep(struct kprobe *p, struct pt_regs *regs) } } -int __kprobes arc_kprobe_handler(unsigned long addr, struct pt_regs *regs) +static int +__kprobes arc_kprobe_handler(unsigned long addr, struct pt_regs *regs) { struct kprobe *p; struct kprobe_ctlblk *kcb; @@ -241,8 +242,8 @@ int __kprobes arc_kprobe_handler(unsigned long addr, struct pt_regs *regs) return 0; } -static int __kprobes arc_post_kprobe_handler(unsigned long addr, - struct pt_regs *regs) +static int +__kprobes arc_post_kprobe_handler(unsigned long addr, struct pt_regs *regs) { struct kprobe *cur = kprobe_running(); struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); diff --git a/arch/arc/kernel/perf_event.c b/arch/arc/kernel/perf_event.c index adff957962da..6e5a651cd75c 100644 --- a/arch/arc/kernel/perf_event.c +++ b/arch/arc/kernel/perf_event.c @@ -38,7 +38,7 @@ * (based on a specific RTL build) * Below is the static map between perf generic/arc specific event_id and * h/w condition names. - * At the time of probe, we loop thru each index and find it's name to + * At the time of probe, we loop thru each index and find its name to * complete the mapping of perf event_id to h/w index as latter is needed * to program the counter really */ diff --git a/arch/arc/kernel/setup.c b/arch/arc/kernel/setup.c index d08a5092c2b4..7b6a9beba9db 100644 --- a/arch/arc/kernel/setup.c +++ b/arch/arc/kernel/setup.c @@ -390,7 +390,7 @@ static void arc_chk_core_config(struct cpuinfo_arc *info) #ifdef CONFIG_ARC_HAS_DCCM /* * DCCM can be arbit placed in hardware. - * Make sure it's placement/sz matches what Linux is built with + * Make sure its placement/sz matches what Linux is built with */ if ((unsigned int)__arc_dccm_base != info->dccm.base) panic("Linux built with incorrect DCCM Base address\n"); diff --git a/arch/arc/kernel/signal.c b/arch/arc/kernel/signal.c index 8f6f4a542964..fefa705a8638 100644 --- a/arch/arc/kernel/signal.c +++ b/arch/arc/kernel/signal.c @@ -8,15 +8,16 @@ * * vineetg: Nov 2009 (Everything needed for TIF_RESTORE_SIGMASK) * -do_signal() supports TIF_RESTORE_SIGMASK - * -do_signal() no loner needs oldset, required by OLD sys_sigsuspend - * -sys_rt_sigsuspend() now comes from generic code, so discard arch implemen + * -do_signal() no longer needs oldset, required by OLD sys_sigsuspend + * -sys_rt_sigsuspend() now comes from generic code, so discard arch + * implementation * -sys_sigsuspend() no longer needs to fudge ptregs, hence that arg removed * -sys_sigsuspend() no longer loops for do_signal(), sets TIF_xxx and leaves * the job to do_signal() * * vineetg: July 2009 * -Modified Code to support the uClibc provided userland sigreturn stub - * to avoid kernel synthesing it on user stack at runtime, costing TLB + * to avoid kernel synthesizing it on user stack at runtime, costing TLB * probes and Cache line flushes. * * vineetg: July 2009 diff --git a/arch/arc/kernel/traps.c b/arch/arc/kernel/traps.c index 9b9570b79362..a19751e824fb 100644 --- a/arch/arc/kernel/traps.c +++ b/arch/arc/kernel/traps.c @@ -89,7 +89,7 @@ int do_misaligned_access(unsigned long address, struct pt_regs *regs, /* * Entry point for miscll errors such as Nested Exceptions - * -Duplicate TLB entry is handled seperately though + * -Duplicate TLB entry is handled separately though */ void do_machine_check_fault(unsigned long address, struct pt_regs *regs) { diff --git a/arch/arc/kernel/vmlinux.lds.S b/arch/arc/kernel/vmlinux.lds.S index 549c3f407918..61a1b2b96e1d 100644 --- a/arch/arc/kernel/vmlinux.lds.S +++ b/arch/arc/kernel/vmlinux.lds.S @@ -41,8 +41,8 @@ SECTIONS #endif /* - * The reason for having a seperate subsection .init.ramfs is to - * prevent objump from including it in kernel dumps + * The reason for having a separate subsection .init.ramfs is to + * prevent objdump from including it in kernel dumps * * Reason for having .init.ramfs above .init is to make sure that the * binary blob is tucked away to one side, reducing the displacement diff --git a/arch/arc/mm/tlb.c b/arch/arc/mm/tlb.c index ad702b49aeb3..cae4a7aae0ed 100644 --- a/arch/arc/mm/tlb.c +++ b/arch/arc/mm/tlb.c @@ -212,7 +212,7 @@ void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start, unsigned long flags; /* If range @start to @end is more than 32 TLB entries deep, - * its better to move to a new ASID rather than searching for + * it's better to move to a new ASID rather than searching for * individual entries and then shooting them down * * The calc above is rough, doesn't account for unaligned parts, @@ -408,7 +408,7 @@ static void create_tlb(struct vm_area_struct *vma, unsigned long vaddr, pte_t *p * -More importantly it makes this handler inconsistent with fast-path * TLB Refill handler which always deals with "current" * - * Lets see the use cases when current->mm != vma->mm and we land here + * Let's see the use cases when current->mm != vma->mm and we land here * 1. execve->copy_strings()->__get_user_pages->handle_mm_fault * Here VM wants to pre-install a TLB entry for user stack while * current->mm still points to pre-execve mm (hence the condition). diff --git a/arch/arc/mm/tlbex.S b/arch/arc/mm/tlbex.S index e054780a8fe0..dc65e87a531f 100644 --- a/arch/arc/mm/tlbex.S +++ b/arch/arc/mm/tlbex.S @@ -5,19 +5,19 @@ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) * * Vineetg: April 2011 : - * -MMU v1: moved out legacy code into a seperate file + * -MMU v1: moved out legacy code into a separate file * -MMU v3: PD{0,1} bits layout changed: They don't overlap anymore, * helps avoid a shift when preparing PD0 from PTE * * Vineetg: July 2009 - * -For MMU V2, we need not do heuristics at the time of commiting a D-TLB - * entry, so that it doesn't knock out it's I-TLB entry + * -For MMU V2, we need not do heuristics at the time of committing a D-TLB + * entry, so that it doesn't knock out its I-TLB entry * -Some more fine tuning: * bmsk instead of add, asl.cc instead of branch, delay slot utilise etc * * Vineetg: July 2009 * -Practically rewrote the I/D TLB Miss handlers - * Now 40 and 135 instructions a peice as compared to 131 and 449 resp. + * Now 40 and 135 instructions apiece as compared to 131 and 449 resp. * Hence Leaner by 1.5 K * Used Conditional arithmetic to replace excessive branching * Also used short instructions wherever possible diff --git a/arch/arm/boot/dts/microchip/at91-sama7g54_curiosity.dts b/arch/arm/boot/dts/microchip/at91-sama7g54_curiosity.dts index 4f609e9e510e..009d2c832421 100644 --- a/arch/arm/boot/dts/microchip/at91-sama7g54_curiosity.dts +++ b/arch/arm/boot/dts/microchip/at91-sama7g54_curiosity.dts @@ -242,7 +242,7 @@ regulator-state-standby { regulator-on-in-suspend; - regulator-suspend-voltage = <1150000>; + regulator-suspend-microvolt = <1150000>; regulator-mode = <4>; }; @@ -263,7 +263,7 @@ regulator-state-standby { regulator-on-in-suspend; - regulator-suspend-voltage = <1050000>; + regulator-suspend-microvolt = <1050000>; regulator-mode = <4>; }; @@ -280,7 +280,7 @@ regulator-always-on; regulator-state-standby { - regulator-suspend-voltage = <1800000>; + regulator-suspend-microvolt = <1800000>; regulator-on-in-suspend; }; @@ -296,7 +296,7 @@ regulator-always-on; regulator-state-standby { - regulator-suspend-voltage = <3300000>; + regulator-suspend-microvolt = <3300000>; regulator-on-in-suspend; }; diff --git a/arch/arm/boot/dts/microchip/at91-sama7g5ek.dts b/arch/arm/boot/dts/microchip/at91-sama7g5ek.dts index 217e9b96c61e..20b2497657ae 100644 --- a/arch/arm/boot/dts/microchip/at91-sama7g5ek.dts +++ b/arch/arm/boot/dts/microchip/at91-sama7g5ek.dts @@ -293,7 +293,7 @@ regulator-state-standby { regulator-on-in-suspend; - regulator-suspend-voltage = <1150000>; + regulator-suspend-microvolt = <1150000>; regulator-mode = <4>; }; @@ -314,7 +314,7 @@ regulator-state-standby { regulator-on-in-suspend; - regulator-suspend-voltage = <1050000>; + regulator-suspend-microvolt = <1050000>; regulator-mode = <4>; }; @@ -331,7 +331,7 @@ regulator-always-on; regulator-state-standby { - regulator-suspend-voltage = <1800000>; + regulator-suspend-microvolt = <1800000>; regulator-on-in-suspend; }; @@ -346,7 +346,7 @@ regulator-max-microvolt = <3700000>; regulator-state-standby { - regulator-suspend-voltage = <1800000>; + regulator-suspend-microvolt = <1800000>; regulator-on-in-suspend; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-tarragon-common.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-tarragon-common.dtsi index 3fdece5bd31f..5248a058230c 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6ull-tarragon-common.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6ull-tarragon-common.dtsi @@ -805,6 +805,7 @@ &pinctrl_usb_pwr>; dr_mode = "host"; power-active-high; + over-current-active-low; disable-over-current; status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi index bfc5c81a5bd4..8141926e4ef1 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi @@ -1672,7 +1672,7 @@ <&clk IMX8MP_CLK_MEDIA_MIPI_PHY1_REF_ROOT>, <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>; clock-names = "pclk", "wrap", "phy", "axi"; - assigned-clocks = <&clk IMX8MP_CLK_MEDIA_CAM1_PIX>, + assigned-clocks = <&clk IMX8MP_CLK_MEDIA_CAM2_PIX>, <&clk IMX8MP_CLK_MEDIA_MIPI_PHY1_REF>; assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_1000M>, <&clk IMX8MP_CLK_24M>; diff --git a/arch/arm64/boot/dts/mediatek/mt2712-evb.dts b/arch/arm64/boot/dts/mediatek/mt2712-evb.dts index 0c38f7b51763..234e3b23d7a8 100644 --- a/arch/arm64/boot/dts/mediatek/mt2712-evb.dts +++ b/arch/arm64/boot/dts/mediatek/mt2712-evb.dts @@ -129,7 +129,7 @@ }; &pio { - eth_default: eth_default { + eth_default: eth-default-pins { tx_pins { pinmux = <MT2712_PIN_71_GBE_TXD3__FUNC_GBE_TXD3>, <MT2712_PIN_72_GBE_TXD2__FUNC_GBE_TXD2>, @@ -156,7 +156,7 @@ }; }; - eth_sleep: eth_sleep { + eth_sleep: eth-sleep-pins { tx_pins { pinmux = <MT2712_PIN_71_GBE_TXD3__FUNC_GPIO71>, <MT2712_PIN_72_GBE_TXD2__FUNC_GPIO72>, @@ -182,14 +182,14 @@ }; }; - usb0_id_pins_float: usb0_iddig { + usb0_id_pins_float: usb0-iddig-pins { pins_iddig { pinmux = <MT2712_PIN_12_IDDIG_P0__FUNC_IDDIG_A>; bias-pull-up; }; }; - usb1_id_pins_float: usb1_iddig { + usb1_id_pins_float: usb1-iddig-pins { pins_iddig { pinmux = <MT2712_PIN_14_IDDIG_P1__FUNC_IDDIG_B>; bias-pull-up; diff --git a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi index 6d218caa198c..082672efba0a 100644 --- a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi @@ -249,10 +249,11 @@ #clock-cells = <1>; }; - infracfg: syscon@10001000 { + infracfg: clock-controller@10001000 { compatible = "mediatek,mt2712-infracfg", "syscon"; reg = <0 0x10001000 0 0x1000>; #clock-cells = <1>; + #reset-cells = <1>; }; pericfg: syscon@10003000 { diff --git a/arch/arm64/boot/dts/mediatek/mt7622.dtsi b/arch/arm64/boot/dts/mediatek/mt7622.dtsi index 3ee9266fa8e9..917fa39a74f8 100644 --- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi @@ -252,7 +252,7 @@ clock-names = "hif_sel"; }; - cir: cir@10009000 { + cir: ir-receiver@10009000 { compatible = "mediatek,mt7622-cir"; reg = <0 0x10009000 0 0x1000>; interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_LOW>; @@ -283,16 +283,14 @@ }; }; - apmixedsys: apmixedsys@10209000 { - compatible = "mediatek,mt7622-apmixedsys", - "syscon"; + apmixedsys: clock-controller@10209000 { + compatible = "mediatek,mt7622-apmixedsys"; reg = <0 0x10209000 0 0x1000>; #clock-cells = <1>; }; - topckgen: topckgen@10210000 { - compatible = "mediatek,mt7622-topckgen", - "syscon"; + topckgen: clock-controller@10210000 { + compatible = "mediatek,mt7622-topckgen"; reg = <0 0x10210000 0 0x1000>; #clock-cells = <1>; }; @@ -515,7 +513,6 @@ <&pericfg CLK_PERI_AUXADC_PD>; clock-names = "therm", "auxadc"; resets = <&pericfg MT7622_PERI_THERM_SW_RST>; - reset-names = "therm"; mediatek,auxadc = <&auxadc>; mediatek,apmixedsys = <&apmixedsys>; nvmem-cells = <&thermal_calibration>; @@ -734,9 +731,8 @@ power-domains = <&scpsys MT7622_POWER_DOMAIN_WB>; }; - ssusbsys: ssusbsys@1a000000 { - compatible = "mediatek,mt7622-ssusbsys", - "syscon"; + ssusbsys: clock-controller@1a000000 { + compatible = "mediatek,mt7622-ssusbsys"; reg = <0 0x1a000000 0 0x1000>; #clock-cells = <1>; #reset-cells = <1>; @@ -793,9 +789,8 @@ }; }; - pciesys: pciesys@1a100800 { - compatible = "mediatek,mt7622-pciesys", - "syscon"; + pciesys: clock-controller@1a100800 { + compatible = "mediatek,mt7622-pciesys"; reg = <0 0x1a100800 0 0x1000>; #clock-cells = <1>; #reset-cells = <1>; @@ -921,12 +916,13 @@ }; }; - hifsys: syscon@1af00000 { - compatible = "mediatek,mt7622-hifsys", "syscon"; + hifsys: clock-controller@1af00000 { + compatible = "mediatek,mt7622-hifsys"; reg = <0 0x1af00000 0 0x70>; + #clock-cells = <1>; }; - ethsys: syscon@1b000000 { + ethsys: clock-controller@1b000000 { compatible = "mediatek,mt7622-ethsys", "syscon"; reg = <0 0x1b000000 0 0x1000>; @@ -966,9 +962,7 @@ }; eth: ethernet@1b100000 { - compatible = "mediatek,mt7622-eth", - "mediatek,mt2701-eth", - "syscon"; + compatible = "mediatek,mt7622-eth"; reg = <0 0x1b100000 0 0x20000>; interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_LOW>, <GIC_SPI 224 IRQ_TYPE_LEVEL_LOW>, diff --git a/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts index e04b1c0c0ebb..ed79ad1ae871 100644 --- a/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts +++ b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts @@ -146,19 +146,19 @@ &cpu_thermal { cooling-maps { - cpu-active-high { + map-cpu-active-high { /* active: set fan to cooling level 2 */ cooling-device = <&fan 2 2>; trip = <&cpu_trip_active_high>; }; - cpu-active-med { + map-cpu-active-med { /* active: set fan to cooling level 1 */ cooling-device = <&fan 1 1>; trip = <&cpu_trip_active_med>; }; - cpu-active-low { + map-cpu-active-low { /* active: set fan to cooling level 0 */ cooling-device = <&fan 0 0>; trip = <&cpu_trip_active_low>; diff --git a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi index b3f416b9a7a4..559990dcd1d1 100644 --- a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi @@ -332,9 +332,8 @@ reg = <0 0x1100c800 0 0x800>; interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; clocks = <&infracfg CLK_INFRA_THERM_CK>, - <&infracfg CLK_INFRA_ADC_26M_CK>, - <&infracfg CLK_INFRA_ADC_FRC_CK>; - clock-names = "therm", "auxadc", "adc_32k"; + <&infracfg CLK_INFRA_ADC_26M_CK>; + clock-names = "therm", "auxadc"; nvmem-cells = <&thermal_calibration>; nvmem-cell-names = "calibration-data"; #thermal-sensor-cells = <1>; @@ -492,8 +491,6 @@ compatible = "mediatek,mt7986-ethsys", "syscon"; reg = <0 0x15000000 0 0x1000>; - #address-cells = <1>; - #size-cells = <1>; #clock-cells = <1>; #reset-cells = <1>; }; @@ -556,7 +553,6 @@ <&topckgen CLK_TOP_SGM_325M_SEL>; assigned-clock-parents = <&apmixedsys CLK_APMIXED_NET2PLL>, <&apmixedsys CLK_APMIXED_SGMPLL>; - #reset-cells = <1>; #address-cells = <1>; #size-cells = <0>; mediatek,ethsys = <ðsys>; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi index 6bd7424ef66c..100191c6453b 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi @@ -433,7 +433,6 @@ }; &mt6358_vgpu_reg { - regulator-min-microvolt = <625000>; regulator-max-microvolt = <900000>; regulator-coupled-with = <&mt6358_vsram_gpu_reg>; diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi index 93dfbf130231..774ae5d9143f 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi @@ -1637,6 +1637,7 @@ compatible = "mediatek,mt8183-mfgcfg", "syscon"; reg = <0 0x13000000 0 0x1000>; #clock-cells = <1>; + power-domains = <&spm MT8183_POWER_DOMAIN_MFG_ASYNC>; }; gpu: gpu@13040000 { diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola.dtsi b/arch/arm64/boot/dts/mediatek/mt8186-corsola.dtsi index 3dea28f1d806..1807e9d6cb0e 100644 --- a/arch/arm64/boot/dts/mediatek/mt8186-corsola.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola.dtsi @@ -1296,7 +1296,7 @@ * regulator coupling requirements. */ regulator-name = "ppvar_dvdd_vgpu"; - regulator-min-microvolt = <600000>; + regulator-min-microvolt = <500000>; regulator-max-microvolt = <950000>; regulator-ramp-delay = <6250>; regulator-enable-ramp-delay = <200>; diff --git a/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi b/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi index 9b738f6a5d21..7a704246678f 100644 --- a/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi @@ -1421,7 +1421,7 @@ mt6315_6_vbuck1: vbuck1 { regulator-compatible = "vbuck1"; regulator-name = "Vbcpu"; - regulator-min-microvolt = <300000>; + regulator-min-microvolt = <400000>; regulator-max-microvolt = <1193750>; regulator-enable-ramp-delay = <256>; regulator-allowed-modes = <0 1 2>; @@ -1431,7 +1431,7 @@ mt6315_6_vbuck3: vbuck3 { regulator-compatible = "vbuck3"; regulator-name = "Vlcpu"; - regulator-min-microvolt = <300000>; + regulator-min-microvolt = <400000>; regulator-max-microvolt = <1193750>; regulator-enable-ramp-delay = <256>; regulator-allowed-modes = <0 1 2>; @@ -1448,7 +1448,7 @@ mt6315_7_vbuck1: vbuck1 { regulator-compatible = "vbuck1"; regulator-name = "Vgpu"; - regulator-min-microvolt = <606250>; + regulator-min-microvolt = <400000>; regulator-max-microvolt = <800000>; regulator-enable-ramp-delay = <256>; regulator-allowed-modes = <0 1 2>; diff --git a/arch/arm64/boot/dts/mediatek/mt8192.dtsi b/arch/arm64/boot/dts/mediatek/mt8192.dtsi index 05e401670bce..84cbdf6e9eb0 100644 --- a/arch/arm64/boot/dts/mediatek/mt8192.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8192.dtsi @@ -1464,6 +1464,7 @@ reg = <0 0x14001000 0 0x1000>; interrupts = <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH 0>; clocks = <&mmsys CLK_MM_DISP_MUTEX0>; + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x1000 0x1000>; mediatek,gce-events = <CMDQ_EVENT_DISP_STREAM_DONE_ENG_EVENT_0>, <CMDQ_EVENT_DISP_STREAM_DONE_ENG_EVENT_1>; power-domains = <&spm MT8192_POWER_DOMAIN_DISP>; diff --git a/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi b/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi index f94c07f8b933..4a11918da370 100644 --- a/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi @@ -264,6 +264,38 @@ status = "okay"; }; +&cpu0 { + cpu-supply = <&mt6359_vcore_buck_reg>; +}; + +&cpu1 { + cpu-supply = <&mt6359_vcore_buck_reg>; +}; + +&cpu2 { + cpu-supply = <&mt6359_vcore_buck_reg>; +}; + +&cpu3 { + cpu-supply = <&mt6359_vcore_buck_reg>; +}; + +&cpu4 { + cpu-supply = <&mt6315_6_vbuck1>; +}; + +&cpu5 { + cpu-supply = <&mt6315_6_vbuck1>; +}; + +&cpu6 { + cpu-supply = <&mt6315_6_vbuck1>; +}; + +&cpu7 { + cpu-supply = <&mt6315_6_vbuck1>; +}; + &dp_intf0 { status = "okay"; @@ -1214,7 +1246,7 @@ mt6315_6_vbuck1: vbuck1 { regulator-compatible = "vbuck1"; regulator-name = "Vbcpu"; - regulator-min-microvolt = <300000>; + regulator-min-microvolt = <400000>; regulator-max-microvolt = <1193750>; regulator-enable-ramp-delay = <256>; regulator-ramp-delay = <6250>; @@ -1232,7 +1264,7 @@ mt6315_7_vbuck1: vbuck1 { regulator-compatible = "vbuck1"; regulator-name = "Vgpu"; - regulator-min-microvolt = <625000>; + regulator-min-microvolt = <400000>; regulator-max-microvolt = <1193750>; regulator-enable-ramp-delay = <256>; regulator-ramp-delay = <6250>; diff --git a/arch/arm64/boot/dts/mediatek/mt8195.dtsi b/arch/arm64/boot/dts/mediatek/mt8195.dtsi index ea6dc220e1cc..5d8b68f86ce4 100644 --- a/arch/arm64/boot/dts/mediatek/mt8195.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi @@ -2028,6 +2028,7 @@ compatible = "mediatek,mt8195-vppsys0", "syscon"; reg = <0 0x14000000 0 0x1000>; #clock-cells = <1>; + mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0 0x1000>; }; dma-controller@14001000 { @@ -2251,6 +2252,7 @@ compatible = "mediatek,mt8195-vppsys1", "syscon"; reg = <0 0x14f00000 0 0x1000>; #clock-cells = <1>; + mediatek,gce-client-reg = <&gce1 SUBSYS_14f0XXXX 0 0x1000>; }; mutex@14f01000 { @@ -3080,6 +3082,7 @@ reg = <0 0x1c01a000 0 0x1000>; mboxes = <&gce0 0 CMDQ_THR_PRIO_4>; #clock-cells = <1>; + mediatek,gce-client-reg = <&gce0 SUBSYS_1c01XXXX 0xa000 0x1000>; }; @@ -3261,6 +3264,7 @@ interrupts = <GIC_SPI 658 IRQ_TYPE_LEVEL_HIGH 0>; power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>; clocks = <&vdosys0 CLK_VDO0_DISP_MUTEX0>; + mediatek,gce-client-reg = <&gce0 SUBSYS_1c01XXXX 0x6000 0x1000>; mediatek,gce-events = <CMDQ_EVENT_VDO0_DISP_STREAM_DONE_0>; }; @@ -3331,6 +3335,7 @@ power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>; clocks = <&vdosys1 CLK_VDO1_DISP_MUTEX>; clock-names = "vdo1_mutex"; + mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x1000 0x1000>; mediatek,gce-events = <CMDQ_EVENT_VDO1_STREAM_DONE_ENG_0>; }; diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi index 7e7f0f0fb41b..41f51d326111 100644 --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi @@ -3707,7 +3707,7 @@ compatible = "qcom,sc7280-adsp-pas"; reg = <0 0x03700000 0 0x100>; - interrupts-extended = <&pdc 6 IRQ_TYPE_LEVEL_HIGH>, + interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>, <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, @@ -3944,7 +3944,7 @@ compatible = "qcom,sc7280-cdsp-pas"; reg = <0 0x0a300000 0 0x10000>; - interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_LEVEL_HIGH>, + interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>, <&cdsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, <&cdsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, <&cdsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, diff --git a/arch/arm64/boot/dts/qcom/sc8180x.dtsi b/arch/arm64/boot/dts/qcom/sc8180x.dtsi index 32afc78d5b76..053f7861c3ce 100644 --- a/arch/arm64/boot/dts/qcom/sc8180x.dtsi +++ b/arch/arm64/boot/dts/qcom/sc8180x.dtsi @@ -2701,7 +2701,7 @@ resets = <&gcc GCC_USB30_SEC_BCR>; power-domains = <&gcc USB30_SEC_GDSC>; interrupts-extended = <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, - <&pdc 7 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 40 IRQ_TYPE_LEVEL_HIGH>, <&pdc 10 IRQ_TYPE_EDGE_BOTH>, <&pdc 11 IRQ_TYPE_EDGE_BOTH>; interrupt-names = "hs_phy_irq", "ss_phy_irq", diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi index a5b194813079..d0f82e12289e 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi +++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi @@ -1774,6 +1774,7 @@ reset-names = "pci"; power-domains = <&gcc PCIE_4_GDSC>; + required-opps = <&rpmhpd_opp_nom>; phys = <&pcie4_phy>; phy-names = "pciephy"; @@ -1872,6 +1873,7 @@ reset-names = "pci"; power-domains = <&gcc PCIE_3B_GDSC>; + required-opps = <&rpmhpd_opp_nom>; phys = <&pcie3b_phy>; phy-names = "pciephy"; @@ -1970,6 +1972,7 @@ reset-names = "pci"; power-domains = <&gcc PCIE_3A_GDSC>; + required-opps = <&rpmhpd_opp_nom>; phys = <&pcie3a_phy>; phy-names = "pciephy"; @@ -2071,6 +2074,7 @@ reset-names = "pci"; power-domains = <&gcc PCIE_2B_GDSC>; + required-opps = <&rpmhpd_opp_nom>; phys = <&pcie2b_phy>; phy-names = "pciephy"; @@ -2169,6 +2173,7 @@ reset-names = "pci"; power-domains = <&gcc PCIE_2A_GDSC>; + required-opps = <&rpmhpd_opp_nom>; phys = <&pcie2a_phy>; phy-names = "pciephy"; @@ -2641,7 +2646,7 @@ compatible = "qcom,sc8280xp-adsp-pas"; reg = <0 0x03000000 0 0x100>; - interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>, + interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>, <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>, <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>, <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>, @@ -4977,7 +4982,7 @@ compatible = "qcom,sc8280xp-nsp0-pas"; reg = <0 0x1b300000 0 0x100>; - interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_LEVEL_HIGH>, + interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>, <&smp2p_nsp0_in 0 IRQ_TYPE_EDGE_RISING>, <&smp2p_nsp0_in 1 IRQ_TYPE_EDGE_RISING>, <&smp2p_nsp0_in 2 IRQ_TYPE_EDGE_RISING>, @@ -5108,7 +5113,7 @@ compatible = "qcom,sc8280xp-nsp1-pas"; reg = <0 0x21300000 0 0x100>; - interrupts-extended = <&intc GIC_SPI 887 IRQ_TYPE_LEVEL_HIGH>, + interrupts-extended = <&intc GIC_SPI 887 IRQ_TYPE_EDGE_RISING>, <&smp2p_nsp1_in 0 IRQ_TYPE_EDGE_RISING>, <&smp2p_nsp1_in 1 IRQ_TYPE_EDGE_RISING>, <&smp2p_nsp1_in 2 IRQ_TYPE_EDGE_RISING>, diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi b/arch/arm64/boot/dts/qcom/sm6350.dtsi index 24bcec3366ef..0be053555602 100644 --- a/arch/arm64/boot/dts/qcom/sm6350.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi @@ -1252,7 +1252,7 @@ compatible = "qcom,sm6350-adsp-pas"; reg = <0 0x03000000 0 0x100>; - interrupts-extended = <&pdc 6 IRQ_TYPE_LEVEL_HIGH>, + interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>, <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>, <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>, <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>, @@ -1511,7 +1511,7 @@ compatible = "qcom,sm6350-cdsp-pas"; reg = <0 0x08300000 0 0x10000>; - interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_LEVEL_HIGH>, + interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>, <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>, <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>, <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>, diff --git a/arch/arm64/boot/dts/qcom/sm6375.dtsi b/arch/arm64/boot/dts/qcom/sm6375.dtsi index 4386f8a9c636..f40509d91bbd 100644 --- a/arch/arm64/boot/dts/qcom/sm6375.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6375.dtsi @@ -1561,7 +1561,7 @@ compatible = "qcom,sm6375-adsp-pas"; reg = <0 0x0a400000 0 0x100>; - interrupts-extended = <&intc GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>, + interrupts-extended = <&intc GIC_SPI 282 IRQ_TYPE_EDGE_RISING>, <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>, <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>, <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>, diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi index 39bd8f0eba1e..7f2333c9d17d 100644 --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi @@ -3062,7 +3062,7 @@ compatible = "qcom,sm8250-slpi-pas"; reg = <0 0x05c00000 0 0x4000>; - interrupts-extended = <&pdc 9 IRQ_TYPE_LEVEL_HIGH>, + interrupts-extended = <&pdc 9 IRQ_TYPE_EDGE_RISING>, <&smp2p_slpi_in 0 IRQ_TYPE_EDGE_RISING>, <&smp2p_slpi_in 1 IRQ_TYPE_EDGE_RISING>, <&smp2p_slpi_in 2 IRQ_TYPE_EDGE_RISING>, @@ -3766,7 +3766,7 @@ compatible = "qcom,sm8250-cdsp-pas"; reg = <0 0x08300000 0 0x10000>; - interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_LEVEL_HIGH>, + interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>, <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>, <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>, <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>, @@ -5928,7 +5928,7 @@ compatible = "qcom,sm8250-adsp-pas"; reg = <0 0x17300000 0 0x100>; - interrupts-extended = <&pdc 6 IRQ_TYPE_LEVEL_HIGH>, + interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>, <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>, <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>, <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>, diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi index b86be34a912b..024d2653cc30 100644 --- a/arch/arm64/boot/dts/qcom/sm8450.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi @@ -1777,12 +1777,8 @@ ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>, <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>; - /* - * MSIs for BDF (1:0.0) only works with Device ID 0x5980. - * Hence, the IDs are swapped. - */ - msi-map = <0x0 &gic_its 0x5981 0x1>, - <0x100 &gic_its 0x5980 0x1>; + msi-map = <0x0 &gic_its 0x5980 0x1>, + <0x100 &gic_its 0x5981 0x1>; msi-map-mask = <0xff00>; interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, @@ -1900,12 +1896,8 @@ ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>, <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>; - /* - * MSIs for BDF (1:0.0) only works with Device ID 0x5a00. - * Hence, the IDs are swapped. - */ - msi-map = <0x0 &gic_its 0x5a01 0x1>, - <0x100 &gic_its 0x5a00 0x1>; + msi-map = <0x0 &gic_its 0x5a00 0x1>, + <0x100 &gic_its 0x5a01 0x1>; msi-map-mask = <0xff00>; interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>, diff --git a/arch/arm64/boot/dts/qcom/sm8550.dtsi b/arch/arm64/boot/dts/qcom/sm8550.dtsi index 3904348075f6..3348bc06db48 100644 --- a/arch/arm64/boot/dts/qcom/sm8550.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8550.dtsi @@ -1755,9 +1755,8 @@ <&gem_noc MASTER_APPSS_PROC 0 &cnoc_main SLAVE_PCIE_0 0>; interconnect-names = "pcie-mem", "cpu-pcie"; - /* Entries are reversed due to the unusual ITS DeviceID encoding */ - msi-map = <0x0 &gic_its 0x1401 0x1>, - <0x100 &gic_its 0x1400 0x1>; + msi-map = <0x0 &gic_its 0x1400 0x1>, + <0x100 &gic_its 0x1401 0x1>; iommu-map = <0x0 &apps_smmu 0x1400 0x1>, <0x100 &apps_smmu 0x1401 0x1>; @@ -1867,9 +1866,8 @@ <&gem_noc MASTER_APPSS_PROC 0 &cnoc_main SLAVE_PCIE_1 0>; interconnect-names = "pcie-mem", "cpu-pcie"; - /* Entries are reversed due to the unusual ITS DeviceID encoding */ - msi-map = <0x0 &gic_its 0x1481 0x1>, - <0x100 &gic_its 0x1480 0x1>; + msi-map = <0x0 &gic_its 0x1480 0x1>, + <0x100 &gic_its 0x1481 0x1>; iommu-map = <0x0 &apps_smmu 0x1480 0x1>, <0x100 &apps_smmu 0x1481 0x1>; diff --git a/arch/arm64/boot/dts/qcom/sm8650.dtsi b/arch/arm64/boot/dts/qcom/sm8650.dtsi index ba72d8f38420..eb117866e59f 100644 --- a/arch/arm64/boot/dts/qcom/sm8650.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8650.dtsi @@ -2274,9 +2274,8 @@ interrupt-map-mask = <0 0 0 0x7>; #interrupt-cells = <1>; - /* Entries are reversed due to the unusual ITS DeviceID encoding */ - msi-map = <0x0 &gic_its 0x1401 0x1>, - <0x100 &gic_its 0x1400 0x1>; + msi-map = <0x0 &gic_its 0x1400 0x1>, + <0x100 &gic_its 0x1401 0x1>; msi-map-mask = <0xff00>; linux,pci-domain = <0>; @@ -2402,9 +2401,8 @@ interrupt-map-mask = <0 0 0 0x7>; #interrupt-cells = <1>; - /* Entries are reversed due to the unusual ITS DeviceID encoding */ - msi-map = <0x0 &gic_its 0x1481 0x1>, - <0x100 &gic_its 0x1480 0x1>; + msi-map = <0x0 &gic_its 0x1480 0x1>, + <0x100 &gic_its 0x1481 0x1>; msi-map-mask = <0xff00>; linux,pci-domain = <1>; diff --git a/arch/arm64/boot/dts/qcom/x1e80100.dtsi b/arch/arm64/boot/dts/qcom/x1e80100.dtsi index 8e517f76189e..6b40082bac68 100644 --- a/arch/arm64/boot/dts/qcom/x1e80100.dtsi +++ b/arch/arm64/boot/dts/qcom/x1e80100.dtsi @@ -284,7 +284,7 @@ domain-idle-states { CLUSTER_CL4: cluster-sleep-0 { - compatible = "arm,idle-state"; + compatible = "domain-idle-state"; idle-state-name = "l2-ret"; arm,psci-suspend-param = <0x01000044>; entry-latency-us = <350>; @@ -293,7 +293,7 @@ }; CLUSTER_CL5: cluster-sleep-1 { - compatible = "arm,idle-state"; + compatible = "domain-idle-state"; idle-state-name = "ret-pll-off"; arm,psci-suspend-param = <0x01000054>; entry-latency-us = <2200>; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi index 5846a11f0e84..d5e035823eb5 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi @@ -663,7 +663,7 @@ camera: &i2c7 { port@1 { reg = <1>; - mipi1_in_panel: endpoint@1 { + mipi1_in_panel: endpoint { remote-endpoint = <&mipi1_out_panel>; }; }; @@ -689,7 +689,6 @@ camera: &i2c7 { ep-gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>; /* PERST# asserted in S3 */ - pcie-reset-suspend = <1>; vpcie3v3-supply = <&wlan_3v3>; vpcie1v8-supply = <&pp1800_pcie>; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts b/arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts index dfb2a0bdea5b..9586bb12a5d8 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts @@ -611,7 +611,7 @@ #size-cells = <0>; interface@0 { /* interface 0 of configuration 1 */ - compatible = "usbbda,8156.config1.0"; + compatible = "usbifbda,8156.config1.0"; reg = <0 1>; }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts b/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts index 054c6a4d1a45..294eb2de263d 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts @@ -779,7 +779,6 @@ }; &pcie0 { - bus-scan-delay-ms = <1000>; ep-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>; num-lanes = <4>; pinctrl-names = "default"; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts b/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts index 2c3984a880af..f6f15946579e 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts @@ -194,6 +194,8 @@ num-lanes = <4>; pinctrl-names = "default"; pinctrl-0 = <&pcie_clkreqn_cpm>; + vpcie3v3-supply = <&vcc3v3_baseboard>; + vpcie12v-supply = <&dc_12v>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi index c08e69391c01..ccbe3a7a1d2c 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi @@ -79,6 +79,26 @@ regulator-max-microvolt = <5000000>; }; + vcca_0v9: vcca-0v9-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcca_0v9"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + vin-supply = <&vcc_1v8>; + }; + + vcca_1v8: vcca-1v8-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcca_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc3v3_sys>; + }; + vdd_log: vdd-log { compatible = "pwm-regulator"; pwms = <&pwm2 0 25000 1>; @@ -416,16 +436,28 @@ gpio1830-supply = <&vcc_1v8>; }; -&pmu_io_domains { - status = "okay"; - pmu1830-supply = <&vcc_1v8>; +&pcie0 { + /* PCIe PHY supplies */ + vpcie0v9-supply = <&vcca_0v9>; + vpcie1v8-supply = <&vcca_1v8>; }; -&pwm2 { - status = "okay"; +&pcie_clkreqn_cpm { + rockchip,pins = + <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_up>; }; &pinctrl { + pinctrl-names = "default"; + pinctrl-0 = <&q7_thermal_pin>; + + gpios { + q7_thermal_pin: q7-thermal-pin { + rockchip,pins = + <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + i2c8 { i2c8_xfer_a: i2c8-xfer { rockchip,pins = @@ -458,11 +490,20 @@ usb3 { usb3_id: usb3-id { rockchip,pins = - <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>; + <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_up>; }; }; }; +&pmu_io_domains { + status = "okay"; + pmu1830-supply = <&vcc_1v8>; +}; + +&pwm2 { + status = "okay"; +}; + &sdhci { /* * Signal integrity isn't great at 200MHz but 100MHz has proven stable diff --git a/arch/arm64/boot/dts/rockchip/rk3566-lubancat-1.dts b/arch/arm64/boot/dts/rockchip/rk3566-lubancat-1.dts index 6ecdf5d28339..c1194d1e438d 100644 --- a/arch/arm64/boot/dts/rockchip/rk3566-lubancat-1.dts +++ b/arch/arm64/boot/dts/rockchip/rk3566-lubancat-1.dts @@ -447,7 +447,6 @@ &pcie2x1 { reset-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>; - disable-gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>; vpcie3v3-supply = <&vcc3v3_pcie>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts b/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts index 7b5f3904ef61..c87fad2c34cb 100644 --- a/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts +++ b/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts @@ -416,6 +416,8 @@ vccio_sd: LDO_REG5 { regulator-name = "vccio_sd"; + regulator-always-on; + regulator-boot-on; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; @@ -525,9 +527,9 @@ #address-cells = <1>; #size-cells = <0>; - switch@0 { + switch@1f { compatible = "mediatek,mt7531"; - reg = <0>; + reg = <0x1f>; ports { #address-cells = <1>; diff --git a/arch/arm64/boot/dts/rockchip/rk3568-lubancat-2.dts b/arch/arm64/boot/dts/rockchip/rk3568-lubancat-2.dts index a8a4cc190eb3..a3112d5df200 100644 --- a/arch/arm64/boot/dts/rockchip/rk3568-lubancat-2.dts +++ b/arch/arm64/boot/dts/rockchip/rk3568-lubancat-2.dts @@ -523,7 +523,6 @@ &pcie2x1 { reset-gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_HIGH>; - disable-gpios = <&gpio3 RK_PC2 GPIO_ACTIVE_HIGH>; vpcie3v3-supply = <&vcc3v3_mini_pcie>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5.dtsi index cce1c8e83587..94ecb9b4f98f 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5.dtsi @@ -216,9 +216,9 @@ pinctrl-0 = <&i2c7m0_xfer>; status = "okay"; - es8316: audio-codec@11 { + es8316: audio-codec@10 { compatible = "everest,es8316"; - reg = <0x11>; + reg = <0x10>; assigned-clocks = <&cru I2S0_8CH_MCLKOUT>; assigned-clock-rates = <12288000>; clocks = <&cru I2S0_8CH_MCLKOUT>; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-plus.dts b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-plus.dts index 1b606ea5b6cf..1a604429fb26 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-plus.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-plus.dts @@ -485,6 +485,7 @@ pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>, <&rk806_dvs2_null>, <&rk806_dvs3_null>; spi-max-frequency = <1000000>; + system-power-controller; vcc1-supply = <&vcc5v0_sys>; vcc2-supply = <&vcc5v0_sys>; @@ -506,7 +507,7 @@ #gpio-cells = <2>; rk806_dvs1_null: dvs1-null-pins { - pins = "gpio_pwrctrl2"; + pins = "gpio_pwrctrl1"; function = "pin_fun0"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-quartzpro64.dts b/arch/arm64/boot/dts/rockchip/rk3588-quartzpro64.dts index 67414d72e2b6..22bbfbe729c1 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-quartzpro64.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588-quartzpro64.dts @@ -456,6 +456,7 @@ <&rk806_dvs2_null>, <&rk806_dvs3_null>; pinctrl-names = "default"; spi-max-frequency = <1000000>; + system-power-controller; vcc1-supply = <&vcc4v0_sys>; vcc2-supply = <&vcc4v0_sys>; diff --git a/arch/loongarch/Kconfig b/arch/loongarch/Kconfig index a5f300ec6f28..54ad04dacdee 100644 --- a/arch/loongarch/Kconfig +++ b/arch/loongarch/Kconfig @@ -595,7 +595,7 @@ config ARCH_SELECTS_CRASH_DUMP select RELOCATABLE config ARCH_HAS_GENERIC_CRASHKERNEL_RESERVATION - def_bool CRASH_CORE + def_bool CRASH_RESERVE config RELOCATABLE bool "Relocatable kernel" diff --git a/arch/loongarch/include/asm/crash_core.h b/arch/loongarch/include/asm/crash_reserve.h index 218bdbfa527b..a1d9b84b1c7d 100644 --- a/arch/loongarch/include/asm/crash_core.h +++ b/arch/loongarch/include/asm/crash_reserve.h @@ -1,6 +1,6 @@ /* SPDX-License-Identifier: GPL-2.0-only */ -#ifndef _LOONGARCH_CRASH_CORE_H -#define _LOONGARCH_CRASH_CORE_H +#ifndef _LOONGARCH_CRASH_RESERVE_H +#define _LOONGARCH_CRASH_RESERVE_H #define CRASH_ALIGN SZ_2M diff --git a/arch/loongarch/include/asm/perf_event.h b/arch/loongarch/include/asm/perf_event.h index 2a35a0bc2aaa..52b638059e40 100644 --- a/arch/loongarch/include/asm/perf_event.h +++ b/arch/loongarch/include/asm/perf_event.h @@ -7,6 +7,14 @@ #ifndef __LOONGARCH_PERF_EVENT_H__ #define __LOONGARCH_PERF_EVENT_H__ +#include <asm/ptrace.h> + #define perf_arch_bpf_user_pt_regs(regs) (struct user_pt_regs *)regs +#define perf_arch_fetch_caller_regs(regs, __ip) { \ + (regs)->csr_era = (__ip); \ + (regs)->regs[3] = current_stack_pointer; \ + (regs)->regs[22] = (unsigned long) __builtin_frame_address(0); \ +} + #endif /* __LOONGARCH_PERF_EVENT_H__ */ diff --git a/arch/loongarch/include/asm/tlb.h b/arch/loongarch/include/asm/tlb.h index da7a3b5b9374..e071f5e9e858 100644 --- a/arch/loongarch/include/asm/tlb.h +++ b/arch/loongarch/include/asm/tlb.h @@ -132,8 +132,6 @@ static __always_inline void invtlb_all(u32 op, u32 info, u64 addr) ); } -#define __tlb_remove_tlb_entry(tlb, ptep, address) do { } while (0) - static void tlb_flush(struct mmu_gather *tlb); #define tlb_flush tlb_flush diff --git a/arch/loongarch/kernel/perf_event.c b/arch/loongarch/kernel/perf_event.c index 0491bf453cd4..cac7cba81b65 100644 --- a/arch/loongarch/kernel/perf_event.c +++ b/arch/loongarch/kernel/perf_event.c @@ -884,4 +884,4 @@ static int __init init_hw_perf_events(void) return 0; } -early_initcall(init_hw_perf_events); +pure_initcall(init_hw_perf_events); diff --git a/arch/loongarch/mm/fault.c b/arch/loongarch/mm/fault.c index 1fc2f6813ea0..97b40defde06 100644 --- a/arch/loongarch/mm/fault.c +++ b/arch/loongarch/mm/fault.c @@ -202,10 +202,10 @@ good_area: if (!(vma->vm_flags & VM_WRITE)) goto bad_area; } else { - if (!(vma->vm_flags & VM_READ) && address != exception_era(regs)) - goto bad_area; if (!(vma->vm_flags & VM_EXEC) && address == exception_era(regs)) goto bad_area; + if (!(vma->vm_flags & (VM_READ | VM_WRITE)) && address != exception_era(regs)) + goto bad_area; } /* diff --git a/arch/riscv/Kconfig.errata b/arch/riscv/Kconfig.errata index 910ba8837add..2acc7d876e1f 100644 --- a/arch/riscv/Kconfig.errata +++ b/arch/riscv/Kconfig.errata @@ -82,14 +82,14 @@ config ERRATA_THEAD Otherwise, please say "N" here to avoid unnecessary overhead. -config ERRATA_THEAD_PBMT - bool "Apply T-Head memory type errata" +config ERRATA_THEAD_MAE + bool "Apply T-Head's memory attribute extension (XTheadMae) errata" depends on ERRATA_THEAD && 64BIT && MMU select RISCV_ALTERNATIVE_EARLY default y help - This will apply the memory type errata to handle the non-standard - memory type bits in page-table-entries on T-Head SoCs. + This will apply the memory attribute extension errata to handle the + non-standard PTE utilization on T-Head SoCs (XTheadMae). If you don't know what to do here, say "Y". diff --git a/arch/riscv/errata/thead/errata.c b/arch/riscv/errata/thead/errata.c index b1c410bbc1ae..bf6a0a6318ee 100644 --- a/arch/riscv/errata/thead/errata.c +++ b/arch/riscv/errata/thead/errata.c @@ -19,20 +19,26 @@ #include <asm/patch.h> #include <asm/vendorid_list.h> -static bool errata_probe_pbmt(unsigned int stage, - unsigned long arch_id, unsigned long impid) +#define CSR_TH_SXSTATUS 0x5c0 +#define SXSTATUS_MAEE _AC(0x200000, UL) + +static bool errata_probe_mae(unsigned int stage, + unsigned long arch_id, unsigned long impid) { - if (!IS_ENABLED(CONFIG_ERRATA_THEAD_PBMT)) + if (!IS_ENABLED(CONFIG_ERRATA_THEAD_MAE)) return false; if (arch_id != 0 || impid != 0) return false; - if (stage == RISCV_ALTERNATIVES_EARLY_BOOT || - stage == RISCV_ALTERNATIVES_MODULE) - return true; + if (stage != RISCV_ALTERNATIVES_EARLY_BOOT && + stage != RISCV_ALTERNATIVES_MODULE) + return false; + + if (!(csr_read(CSR_TH_SXSTATUS) & SXSTATUS_MAEE)) + return false; - return false; + return true; } /* @@ -140,8 +146,8 @@ static u32 thead_errata_probe(unsigned int stage, { u32 cpu_req_errata = 0; - if (errata_probe_pbmt(stage, archid, impid)) - cpu_req_errata |= BIT(ERRATA_THEAD_PBMT); + if (errata_probe_mae(stage, archid, impid)) + cpu_req_errata |= BIT(ERRATA_THEAD_MAE); errata_probe_cmo(stage, archid, impid); diff --git a/arch/riscv/include/asm/errata_list.h b/arch/riscv/include/asm/errata_list.h index 1f2dbfb8a8bf..efd851e1b483 100644 --- a/arch/riscv/include/asm/errata_list.h +++ b/arch/riscv/include/asm/errata_list.h @@ -23,7 +23,7 @@ #endif #ifdef CONFIG_ERRATA_THEAD -#define ERRATA_THEAD_PBMT 0 +#define ERRATA_THEAD_MAE 0 #define ERRATA_THEAD_PMU 1 #define ERRATA_THEAD_NUMBER 2 #endif @@ -53,20 +53,20 @@ asm(ALTERNATIVE("sfence.vma %0", "sfence.vma", SIFIVE_VENDOR_ID, \ * in the default case. */ #define ALT_SVPBMT_SHIFT 61 -#define ALT_THEAD_PBMT_SHIFT 59 +#define ALT_THEAD_MAE_SHIFT 59 #define ALT_SVPBMT(_val, prot) \ asm(ALTERNATIVE_2("li %0, 0\t\nnop", \ "li %0, %1\t\nslli %0,%0,%3", 0, \ RISCV_ISA_EXT_SVPBMT, CONFIG_RISCV_ISA_SVPBMT, \ "li %0, %2\t\nslli %0,%0,%4", THEAD_VENDOR_ID, \ - ERRATA_THEAD_PBMT, CONFIG_ERRATA_THEAD_PBMT) \ + ERRATA_THEAD_MAE, CONFIG_ERRATA_THEAD_MAE) \ : "=r"(_val) \ : "I"(prot##_SVPBMT >> ALT_SVPBMT_SHIFT), \ - "I"(prot##_THEAD >> ALT_THEAD_PBMT_SHIFT), \ + "I"(prot##_THEAD >> ALT_THEAD_MAE_SHIFT), \ "I"(ALT_SVPBMT_SHIFT), \ - "I"(ALT_THEAD_PBMT_SHIFT)) + "I"(ALT_THEAD_MAE_SHIFT)) -#ifdef CONFIG_ERRATA_THEAD_PBMT +#ifdef CONFIG_ERRATA_THEAD_MAE /* * IO/NOCACHE memory types are handled together with svpbmt, * so on T-Head chips, check if no other memory type is set, @@ -83,11 +83,11 @@ asm volatile(ALTERNATIVE( \ "slli t3, t3, %3\n\t" \ "or %0, %0, t3\n\t" \ "2:", THEAD_VENDOR_ID, \ - ERRATA_THEAD_PBMT, CONFIG_ERRATA_THEAD_PBMT) \ + ERRATA_THEAD_MAE, CONFIG_ERRATA_THEAD_MAE) \ : "+r"(_val) \ - : "I"(_PAGE_MTMASK_THEAD >> ALT_THEAD_PBMT_SHIFT), \ - "I"(_PAGE_PMA_THEAD >> ALT_THEAD_PBMT_SHIFT), \ - "I"(ALT_THEAD_PBMT_SHIFT) \ + : "I"(_PAGE_MTMASK_THEAD >> ALT_THEAD_MAE_SHIFT), \ + "I"(_PAGE_PMA_THEAD >> ALT_THEAD_MAE_SHIFT), \ + "I"(ALT_THEAD_MAE_SHIFT) \ : "t3") #else #define ALT_THEAD_PMA(_val) diff --git a/arch/riscv/include/asm/page.h b/arch/riscv/include/asm/page.h index 2947423b5082..115ac98b8d72 100644 --- a/arch/riscv/include/asm/page.h +++ b/arch/riscv/include/asm/page.h @@ -89,7 +89,7 @@ typedef struct page *pgtable_t; #define PTE_FMT "%08lx" #endif -#ifdef CONFIG_64BIT +#if defined(CONFIG_64BIT) && defined(CONFIG_MMU) /* * We override this value as its generic definition uses __pa too early in * the boot process (before kernel_map.va_pa_offset is set). diff --git a/arch/riscv/include/asm/pgtable.h b/arch/riscv/include/asm/pgtable.h index 9f8ea0e33eb1..6afd6bb4882e 100644 --- a/arch/riscv/include/asm/pgtable.h +++ b/arch/riscv/include/asm/pgtable.h @@ -896,7 +896,7 @@ static inline pte_t pte_swp_clear_exclusive(pte_t pte) #define PAGE_SHARED __pgprot(0) #define PAGE_KERNEL __pgprot(0) #define swapper_pg_dir NULL -#define TASK_SIZE 0xffffffffUL +#define TASK_SIZE _AC(-1, UL) #define VMALLOC_START _AC(0, UL) #define VMALLOC_END TASK_SIZE diff --git a/arch/riscv/include/uapi/asm/hwprobe.h b/arch/riscv/include/uapi/asm/hwprobe.h index 9f2a8e3ff204..2902f68dc913 100644 --- a/arch/riscv/include/uapi/asm/hwprobe.h +++ b/arch/riscv/include/uapi/asm/hwprobe.h @@ -54,7 +54,7 @@ struct riscv_hwprobe { #define RISCV_HWPROBE_EXT_ZFHMIN (1 << 28) #define RISCV_HWPROBE_EXT_ZIHINTNTL (1 << 29) #define RISCV_HWPROBE_EXT_ZVFH (1 << 30) -#define RISCV_HWPROBE_EXT_ZVFHMIN (1 << 31) +#define RISCV_HWPROBE_EXT_ZVFHMIN (1ULL << 31) #define RISCV_HWPROBE_EXT_ZFA (1ULL << 32) #define RISCV_HWPROBE_EXT_ZTSO (1ULL << 33) #define RISCV_HWPROBE_EXT_ZACAS (1ULL << 34) diff --git a/arch/riscv/mm/init.c b/arch/riscv/mm/init.c index fe8e159394d8..968761843203 100644 --- a/arch/riscv/mm/init.c +++ b/arch/riscv/mm/init.c @@ -231,7 +231,7 @@ static void __init setup_bootmem(void) * In 64-bit, any use of __va/__pa before this point is wrong as we * did not know the start of DRAM before. */ - if (IS_ENABLED(CONFIG_64BIT)) + if (IS_ENABLED(CONFIG_64BIT) && IS_ENABLED(CONFIG_MMU)) kernel_map.va_pa_offset = PAGE_OFFSET - phys_ram_base; /* |