diff options
Diffstat (limited to 'drivers/hid')
| -rw-r--r-- | drivers/hid/Kconfig | 2 | ||||
| -rw-r--r-- | drivers/hid/hid-holtek-kbd.c | 4 | ||||
| -rw-r--r-- | drivers/hid/hid-ids.h | 1 | ||||
| -rw-r--r-- | drivers/hid/hid-input.c | 2 | ||||
| -rw-r--r-- | drivers/hid/hid-logitech-hidpp.c | 5 | ||||
| -rw-r--r-- | drivers/hid/hid-multitouch.c | 4 | ||||
| -rw-r--r-- | drivers/hid/hid-nintendo.c | 175 | ||||
| -rw-r--r-- | drivers/hid/hid-nvidia-shield.c | 9 | ||||
| -rw-r--r-- | drivers/hid/hid-sony.c | 2 | ||||
| -rw-r--r-- | drivers/hid/hid-steelseries.c | 2 | ||||
| -rw-r--r-- | drivers/hid/i2c-hid/i2c-hid-core.c | 144 | ||||
| -rw-r--r-- | drivers/hid/intel-ish-hid/ipc/pci-ish.c | 8 |
12 files changed, 218 insertions, 140 deletions
diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig index 0cea301cc9a9..790aa908e2a7 100644 --- a/drivers/hid/Kconfig +++ b/drivers/hid/Kconfig @@ -799,6 +799,8 @@ config HID_NVIDIA_SHIELD tristate "NVIDIA SHIELD devices" depends on USB_HID depends on BT_HIDP + depends on LEDS_CLASS + select POWER_SUPPLY help Support for NVIDIA SHIELD accessories. diff --git a/drivers/hid/hid-holtek-kbd.c b/drivers/hid/hid-holtek-kbd.c index 403506b9697e..b346d68a06f5 100644 --- a/drivers/hid/hid-holtek-kbd.c +++ b/drivers/hid/hid-holtek-kbd.c @@ -130,6 +130,10 @@ static int holtek_kbd_input_event(struct input_dev *dev, unsigned int type, return -ENODEV; boot_hid = usb_get_intfdata(boot_interface); + if (list_empty(&boot_hid->inputs)) { + hid_err(hid, "no inputs found\n"); + return -ENODEV; + } boot_hid_input = list_first_entry(&boot_hid->inputs, struct hid_input, list); diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index 7e499992a793..e4d2dfd5d253 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -425,6 +425,7 @@ #define I2C_DEVICE_ID_HP_SPECTRE_X360_13T_AW100 0x29F5 #define I2C_DEVICE_ID_HP_SPECTRE_X360_14T_EA100_V1 0x2BED #define I2C_DEVICE_ID_HP_SPECTRE_X360_14T_EA100_V2 0x2BEE +#define I2C_DEVICE_ID_HP_ENVY_X360_15_EU0556NG 0x2D02 #define USB_VENDOR_ID_ELECOM 0x056e #define USB_DEVICE_ID_ELECOM_BM084 0x0061 diff --git a/drivers/hid/hid-input.c b/drivers/hid/hid-input.c index 0235cc1690a1..c8b20d44b147 100644 --- a/drivers/hid/hid-input.c +++ b/drivers/hid/hid-input.c @@ -409,6 +409,8 @@ static const struct hid_device_id hid_battery_quirks[] = { HID_BATTERY_QUIRK_IGNORE }, { HID_I2C_DEVICE(USB_VENDOR_ID_ELAN, I2C_DEVICE_ID_HP_SPECTRE_X360_14T_EA100_V2), HID_BATTERY_QUIRK_IGNORE }, + { HID_I2C_DEVICE(USB_VENDOR_ID_ELAN, I2C_DEVICE_ID_HP_ENVY_X360_15_EU0556NG), + HID_BATTERY_QUIRK_IGNORE }, {} }; diff --git a/drivers/hid/hid-logitech-hidpp.c b/drivers/hid/hid-logitech-hidpp.c index 05f5b5f588a2..a209d51bd247 100644 --- a/drivers/hid/hid-logitech-hidpp.c +++ b/drivers/hid/hid-logitech-hidpp.c @@ -4515,7 +4515,8 @@ static int hidpp_probe(struct hid_device *hdev, const struct hid_device_id *id) goto hid_hw_init_fail; } - hidpp_connect_event(hidpp); + schedule_work(&hidpp->work); + flush_work(&hidpp->work); if (will_restart) { /* Reset the HID node state */ @@ -4677,6 +4678,8 @@ static const struct hid_device_id hidpp_devices[] = { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_LOGITECH, 0xb008) }, { /* MX Master mouse over Bluetooth */ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_LOGITECH, 0xb012) }, + { /* M720 Triathlon mouse over Bluetooth */ + HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_LOGITECH, 0xb015) }, { /* MX Ergo trackball over Bluetooth */ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_LOGITECH, 0xb01d) }, { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_LOGITECH, 0xb01e) }, diff --git a/drivers/hid/hid-multitouch.c b/drivers/hid/hid-multitouch.c index 521b2ffb4244..8db4ae05febc 100644 --- a/drivers/hid/hid-multitouch.c +++ b/drivers/hid/hid-multitouch.c @@ -2146,6 +2146,10 @@ static const struct hid_device_id mt_devices[] = { /* Synaptics devices */ { .driver_data = MT_CLS_WIN_8_FORCE_MULTI_INPUT, HID_DEVICE(BUS_I2C, HID_GROUP_MULTITOUCH_WIN_8, + USB_VENDOR_ID_SYNAPTICS, 0xcd7e) }, + + { .driver_data = MT_CLS_WIN_8_FORCE_MULTI_INPUT, + HID_DEVICE(BUS_I2C, HID_GROUP_MULTITOUCH_WIN_8, USB_VENDOR_ID_SYNAPTICS, 0xce08) }, { .driver_data = MT_CLS_WIN_8_FORCE_MULTI_INPUT, diff --git a/drivers/hid/hid-nintendo.c b/drivers/hid/hid-nintendo.c index 250f5d2f888a..10468f727e5b 100644 --- a/drivers/hid/hid-nintendo.c +++ b/drivers/hid/hid-nintendo.c @@ -2088,7 +2088,9 @@ static int joycon_read_info(struct joycon_ctlr *ctlr) struct joycon_input_report *report; req.subcmd_id = JC_SUBCMD_REQ_DEV_INFO; + mutex_lock(&ctlr->output_mutex); ret = joycon_send_subcmd(ctlr, &req, 0, HZ); + mutex_unlock(&ctlr->output_mutex); if (ret) { hid_err(ctlr->hdev, "Failed to get joycon info; ret=%d\n", ret); return ret; @@ -2117,6 +2119,85 @@ static int joycon_read_info(struct joycon_ctlr *ctlr) return 0; } +static int joycon_init(struct hid_device *hdev) +{ + struct joycon_ctlr *ctlr = hid_get_drvdata(hdev); + int ret = 0; + + mutex_lock(&ctlr->output_mutex); + /* if handshake command fails, assume ble pro controller */ + if ((jc_type_is_procon(ctlr) || jc_type_is_chrggrip(ctlr)) && + !joycon_send_usb(ctlr, JC_USB_CMD_HANDSHAKE, HZ)) { + hid_dbg(hdev, "detected USB controller\n"); + /* set baudrate for improved latency */ + ret = joycon_send_usb(ctlr, JC_USB_CMD_BAUDRATE_3M, HZ); + if (ret) { + hid_err(hdev, "Failed to set baudrate; ret=%d\n", ret); + goto out_unlock; + } + /* handshake */ + ret = joycon_send_usb(ctlr, JC_USB_CMD_HANDSHAKE, HZ); + if (ret) { + hid_err(hdev, "Failed handshake; ret=%d\n", ret); + goto out_unlock; + } + /* + * Set no timeout (to keep controller in USB mode). + * This doesn't send a response, so ignore the timeout. + */ + joycon_send_usb(ctlr, JC_USB_CMD_NO_TIMEOUT, HZ/10); + } else if (jc_type_is_chrggrip(ctlr)) { + hid_err(hdev, "Failed charging grip handshake\n"); + ret = -ETIMEDOUT; + goto out_unlock; + } + + /* get controller calibration data, and parse it */ + ret = joycon_request_calibration(ctlr); + if (ret) { + /* + * We can function with default calibration, but it may be + * inaccurate. Provide a warning, and continue on. + */ + hid_warn(hdev, "Analog stick positions may be inaccurate\n"); + } + + /* get IMU calibration data, and parse it */ + ret = joycon_request_imu_calibration(ctlr); + if (ret) { + /* + * We can function with default calibration, but it may be + * inaccurate. Provide a warning, and continue on. + */ + hid_warn(hdev, "Unable to read IMU calibration data\n"); + } + + /* Set the reporting mode to 0x30, which is the full report mode */ + ret = joycon_set_report_mode(ctlr); + if (ret) { + hid_err(hdev, "Failed to set report mode; ret=%d\n", ret); + goto out_unlock; + } + + /* Enable rumble */ + ret = joycon_enable_rumble(ctlr); + if (ret) { + hid_err(hdev, "Failed to enable rumble; ret=%d\n", ret); + goto out_unlock; + } + + /* Enable the IMU */ + ret = joycon_enable_imu(ctlr); + if (ret) { + hid_err(hdev, "Failed to enable the IMU; ret=%d\n", ret); + goto out_unlock; + } + +out_unlock: + mutex_unlock(&ctlr->output_mutex); + return ret; +} + /* Common handler for parsing inputs */ static int joycon_ctlr_read_handler(struct joycon_ctlr *ctlr, u8 *data, int size) @@ -2248,85 +2329,19 @@ static int nintendo_hid_probe(struct hid_device *hdev, hid_device_io_start(hdev); - /* Initialize the controller */ - mutex_lock(&ctlr->output_mutex); - /* if handshake command fails, assume ble pro controller */ - if ((jc_type_is_procon(ctlr) || jc_type_is_chrggrip(ctlr)) && - !joycon_send_usb(ctlr, JC_USB_CMD_HANDSHAKE, HZ)) { - hid_dbg(hdev, "detected USB controller\n"); - /* set baudrate for improved latency */ - ret = joycon_send_usb(ctlr, JC_USB_CMD_BAUDRATE_3M, HZ); - if (ret) { - hid_err(hdev, "Failed to set baudrate; ret=%d\n", ret); - goto err_mutex; - } - /* handshake */ - ret = joycon_send_usb(ctlr, JC_USB_CMD_HANDSHAKE, HZ); - if (ret) { - hid_err(hdev, "Failed handshake; ret=%d\n", ret); - goto err_mutex; - } - /* - * Set no timeout (to keep controller in USB mode). - * This doesn't send a response, so ignore the timeout. - */ - joycon_send_usb(ctlr, JC_USB_CMD_NO_TIMEOUT, HZ/10); - } else if (jc_type_is_chrggrip(ctlr)) { - hid_err(hdev, "Failed charging grip handshake\n"); - ret = -ETIMEDOUT; - goto err_mutex; - } - - /* get controller calibration data, and parse it */ - ret = joycon_request_calibration(ctlr); + ret = joycon_init(hdev); if (ret) { - /* - * We can function with default calibration, but it may be - * inaccurate. Provide a warning, and continue on. - */ - hid_warn(hdev, "Analog stick positions may be inaccurate\n"); - } - - /* get IMU calibration data, and parse it */ - ret = joycon_request_imu_calibration(ctlr); - if (ret) { - /* - * We can function with default calibration, but it may be - * inaccurate. Provide a warning, and continue on. - */ - hid_warn(hdev, "Unable to read IMU calibration data\n"); - } - - /* Set the reporting mode to 0x30, which is the full report mode */ - ret = joycon_set_report_mode(ctlr); - if (ret) { - hid_err(hdev, "Failed to set report mode; ret=%d\n", ret); - goto err_mutex; - } - - /* Enable rumble */ - ret = joycon_enable_rumble(ctlr); - if (ret) { - hid_err(hdev, "Failed to enable rumble; ret=%d\n", ret); - goto err_mutex; - } - - /* Enable the IMU */ - ret = joycon_enable_imu(ctlr); - if (ret) { - hid_err(hdev, "Failed to enable the IMU; ret=%d\n", ret); - goto err_mutex; + hid_err(hdev, "Failed to initialize controller; ret=%d\n", ret); + goto err_close; } ret = joycon_read_info(ctlr); if (ret) { hid_err(hdev, "Failed to retrieve controller info; ret=%d\n", ret); - goto err_mutex; + goto err_close; } - mutex_unlock(&ctlr->output_mutex); - /* Initialize the leds */ ret = joycon_leds_create(ctlr); if (ret) { @@ -2352,8 +2367,6 @@ static int nintendo_hid_probe(struct hid_device *hdev, hid_dbg(hdev, "probe - success\n"); return 0; -err_mutex: - mutex_unlock(&ctlr->output_mutex); err_close: hid_hw_close(hdev); err_stop: @@ -2383,6 +2396,20 @@ static void nintendo_hid_remove(struct hid_device *hdev) hid_hw_stop(hdev); } +#ifdef CONFIG_PM + +static int nintendo_hid_resume(struct hid_device *hdev) +{ + int ret = joycon_init(hdev); + + if (ret) + hid_err(hdev, "Failed to restore controller after resume"); + + return ret; +} + +#endif + static const struct hid_device_id nintendo_hid_devices[] = { { HID_USB_DEVICE(USB_VENDOR_ID_NINTENDO, USB_DEVICE_ID_NINTENDO_PROCON) }, @@ -2404,6 +2431,10 @@ static struct hid_driver nintendo_hid_driver = { .probe = nintendo_hid_probe, .remove = nintendo_hid_remove, .raw_event = nintendo_hid_event, + +#ifdef CONFIG_PM + .resume = nintendo_hid_resume, +#endif }; module_hid_driver(nintendo_hid_driver); diff --git a/drivers/hid/hid-nvidia-shield.c b/drivers/hid/hid-nvidia-shield.c index 9a3576dbf421..c463e54decbc 100644 --- a/drivers/hid/hid-nvidia-shield.c +++ b/drivers/hid/hid-nvidia-shield.c @@ -801,7 +801,7 @@ static inline int thunderstrike_led_create(struct thunderstrike *ts) led->name = devm_kasprintf(&ts->base.hdev->dev, GFP_KERNEL, "thunderstrike%d:blue:led", ts->id); led->max_brightness = 1; - led->flags = LED_CORE_SUSPENDRESUME; + led->flags = LED_CORE_SUSPENDRESUME | LED_RETAIN_AT_SHUTDOWN; led->brightness_get = &thunderstrike_led_get_brightness; led->brightness_set = &thunderstrike_led_set_brightness; @@ -1058,7 +1058,7 @@ static int shield_probe(struct hid_device *hdev, const struct hid_device_id *id) ret = hid_hw_start(hdev, HID_CONNECT_HIDINPUT); if (ret) { hid_err(hdev, "Failed to start HID device\n"); - goto err_haptics; + goto err_ts_create; } ret = hid_hw_open(hdev); @@ -1073,9 +1073,12 @@ static int shield_probe(struct hid_device *hdev, const struct hid_device_id *id) err_stop: hid_hw_stop(hdev); -err_haptics: +err_ts_create: + power_supply_unregister(ts->base.battery_dev.psy); if (ts->haptics_dev) input_unregister_device(ts->haptics_dev); + led_classdev_unregister(&ts->led_dev); + ida_free(&thunderstrike_ida, ts->id); return ret; } diff --git a/drivers/hid/hid-sony.c b/drivers/hid/hid-sony.c index dd942061fd77..ebc0aa4e4345 100644 --- a/drivers/hid/hid-sony.c +++ b/drivers/hid/hid-sony.c @@ -2155,6 +2155,8 @@ static int sony_probe(struct hid_device *hdev, const struct hid_device_id *id) return ret; err: + usb_free_urb(sc->ghl_urb); + hid_hw_stop(hdev); return ret; } diff --git a/drivers/hid/hid-steelseries.c b/drivers/hid/hid-steelseries.c index 43d2cf7153d7..b3edadf42d6d 100644 --- a/drivers/hid/hid-steelseries.c +++ b/drivers/hid/hid-steelseries.c @@ -390,7 +390,7 @@ static int steelseries_headset_arctis_1_fetch_battery(struct hid_device *hdev) ret = hid_hw_raw_request(hdev, arctis_1_battery_request[0], write_buf, sizeof(arctis_1_battery_request), HID_OUTPUT_REPORT, HID_REQ_SET_REPORT); - if (ret < sizeof(arctis_1_battery_request)) { + if (ret < (int)sizeof(arctis_1_battery_request)) { hid_err(hdev, "hid_hw_raw_request() failed with %d\n", ret); ret = -ENODATA; } diff --git a/drivers/hid/i2c-hid/i2c-hid-core.c b/drivers/hid/i2c-hid/i2c-hid-core.c index 9601c0605fd9..2735cd585af0 100644 --- a/drivers/hid/i2c-hid/i2c-hid-core.c +++ b/drivers/hid/i2c-hid/i2c-hid-core.c @@ -998,45 +998,29 @@ static int i2c_hid_core_resume(struct i2c_hid *ihid) return hid_driver_reset_resume(hid); } -/** - * __do_i2c_hid_core_initial_power_up() - First time power up of the i2c-hid device. - * @ihid: The ihid object created during probe. - * - * This function is called at probe time. - * - * The initial power on is where we do some basic validation that the device - * exists, where we fetch the HID descriptor, and where we create the actual - * HID devices. - * - * Return: 0 or error code. +/* + * Check that the device exists and parse the HID descriptor. */ -static int __do_i2c_hid_core_initial_power_up(struct i2c_hid *ihid) +static int __i2c_hid_core_probe(struct i2c_hid *ihid) { struct i2c_client *client = ihid->client; struct hid_device *hid = ihid->hid; int ret; - ret = i2c_hid_core_power_up(ihid); - if (ret) - return ret; - /* Make sure there is something at this address */ ret = i2c_smbus_read_byte(client); if (ret < 0) { i2c_hid_dbg(ihid, "nothing at this address: %d\n", ret); - ret = -ENXIO; - goto err; + return -ENXIO; } ret = i2c_hid_fetch_hid_descriptor(ihid); if (ret < 0) { dev_err(&client->dev, "Failed to fetch the HID Descriptor\n"); - goto err; + return ret; } - enable_irq(client->irq); - hid->version = le16_to_cpu(ihid->hdesc.bcdVersion); hid->vendor = le16_to_cpu(ihid->hdesc.wVendorID); hid->product = le16_to_cpu(ihid->hdesc.wProductID); @@ -1050,17 +1034,49 @@ static int __do_i2c_hid_core_initial_power_up(struct i2c_hid *ihid) ihid->quirks = i2c_hid_lookup_quirk(hid->vendor, hid->product); + return 0; +} + +static int i2c_hid_core_register_hid(struct i2c_hid *ihid) +{ + struct i2c_client *client = ihid->client; + struct hid_device *hid = ihid->hid; + int ret; + + enable_irq(client->irq); + ret = hid_add_device(hid); if (ret) { if (ret != -ENODEV) hid_err(client, "can't add hid device: %d\n", ret); - goto err; + disable_irq(client->irq); + return ret; } return 0; +} + +static int i2c_hid_core_probe_panel_follower(struct i2c_hid *ihid) +{ + int ret; + + ret = i2c_hid_core_power_up(ihid); + if (ret) + return ret; -err: + ret = __i2c_hid_core_probe(ihid); + if (ret) + goto err_power_down; + + ret = i2c_hid_core_register_hid(ihid); + if (ret) + goto err_power_down; + + return 0; + +err_power_down: i2c_hid_core_power_down(ihid); + return ret; } @@ -1077,7 +1093,7 @@ static void ihid_core_panel_prepare_work(struct work_struct *work) * steps. */ if (!hid->version) - ret = __do_i2c_hid_core_initial_power_up(ihid); + ret = i2c_hid_core_probe_panel_follower(ihid); else ret = i2c_hid_core_resume(ihid); @@ -1136,7 +1152,6 @@ static int i2c_hid_core_register_panel_follower(struct i2c_hid *ihid) struct device *dev = &ihid->client->dev; int ret; - ihid->is_panel_follower = true; ihid->panel_follower.funcs = &i2c_hid_core_panel_follower_funcs; /* @@ -1156,30 +1171,6 @@ static int i2c_hid_core_register_panel_follower(struct i2c_hid *ihid) return 0; } -static int i2c_hid_core_initial_power_up(struct i2c_hid *ihid) -{ - /* - * If we're a panel follower, we'll register and do our initial power - * up when the panel turns on; otherwise we do it right away. - */ - if (drm_is_panel_follower(&ihid->client->dev)) - return i2c_hid_core_register_panel_follower(ihid); - else - return __do_i2c_hid_core_initial_power_up(ihid); -} - -static void i2c_hid_core_final_power_down(struct i2c_hid *ihid) -{ - /* - * If we're a follower, the act of unfollowing will cause us to be - * powered down. Otherwise we need to manually do it. - */ - if (ihid->is_panel_follower) - drm_panel_remove_follower(&ihid->panel_follower); - else - i2c_hid_core_suspend(ihid, true); -} - int i2c_hid_core_probe(struct i2c_client *client, struct i2chid_ops *ops, u16 hid_descriptor_address, u32 quirks) { @@ -1211,6 +1202,7 @@ int i2c_hid_core_probe(struct i2c_client *client, struct i2chid_ops *ops, ihid->ops = ops; ihid->client = client; ihid->wHIDDescRegister = cpu_to_le16(hid_descriptor_address); + ihid->is_panel_follower = drm_is_panel_follower(&client->dev); init_waitqueue_head(&ihid->wait); mutex_init(&ihid->reset_lock); @@ -1224,14 +1216,10 @@ int i2c_hid_core_probe(struct i2c_client *client, struct i2chid_ops *ops, return ret; device_enable_async_suspend(&client->dev); - ret = i2c_hid_init_irq(client); - if (ret < 0) - goto err_buffers_allocated; - hid = hid_allocate_device(); if (IS_ERR(hid)) { ret = PTR_ERR(hid); - goto err_irq; + goto err_free_buffers; } ihid->hid = hid; @@ -1242,19 +1230,42 @@ int i2c_hid_core_probe(struct i2c_client *client, struct i2chid_ops *ops, hid->bus = BUS_I2C; hid->initial_quirks = quirks; - ret = i2c_hid_core_initial_power_up(ihid); + /* Power on and probe unless device is a panel follower. */ + if (!ihid->is_panel_follower) { + ret = i2c_hid_core_power_up(ihid); + if (ret < 0) + goto err_destroy_device; + + ret = __i2c_hid_core_probe(ihid); + if (ret < 0) + goto err_power_down; + } + + ret = i2c_hid_init_irq(client); + if (ret < 0) + goto err_power_down; + + /* + * If we're a panel follower, we'll register when the panel turns on; + * otherwise we do it right away. + */ + if (ihid->is_panel_follower) + ret = i2c_hid_core_register_panel_follower(ihid); + else + ret = i2c_hid_core_register_hid(ihid); if (ret) - goto err_mem_free; + goto err_free_irq; return 0; -err_mem_free: - hid_destroy_device(hid); - -err_irq: +err_free_irq: free_irq(client->irq, ihid); - -err_buffers_allocated: +err_power_down: + if (!ihid->is_panel_follower) + i2c_hid_core_power_down(ihid); +err_destroy_device: + hid_destroy_device(hid); +err_free_buffers: i2c_hid_free_buffers(ihid); return ret; @@ -1266,7 +1277,14 @@ void i2c_hid_core_remove(struct i2c_client *client) struct i2c_hid *ihid = i2c_get_clientdata(client); struct hid_device *hid; - i2c_hid_core_final_power_down(ihid); + /* + * If we're a follower, the act of unfollowing will cause us to be + * powered down. Otherwise we need to manually do it. + */ + if (ihid->is_panel_follower) + drm_panel_remove_follower(&ihid->panel_follower); + else + i2c_hid_core_suspend(ihid, true); hid = ihid->hid; hid_destroy_device(hid); diff --git a/drivers/hid/intel-ish-hid/ipc/pci-ish.c b/drivers/hid/intel-ish-hid/ipc/pci-ish.c index 55cb25038e63..710fda5f19e1 100644 --- a/drivers/hid/intel-ish-hid/ipc/pci-ish.c +++ b/drivers/hid/intel-ish-hid/ipc/pci-ish.c @@ -133,6 +133,14 @@ static int enable_gpe(struct device *dev) } wakeup = &adev->wakeup; + /* + * Call acpi_disable_gpe(), so that reference count + * gpe_event_info->runtime_count doesn't overflow. + * When gpe_event_info->runtime_count = 0, the call + * to acpi_disable_gpe() simply return. + */ + acpi_disable_gpe(wakeup->gpe_device, wakeup->gpe_number); + acpi_sts = acpi_enable_gpe(wakeup->gpe_device, wakeup->gpe_number); if (ACPI_FAILURE(acpi_sts)) { dev_err(dev, "enable ose_gpe failed\n"); |