diff options
Diffstat (limited to 'drivers/net/ethernet/intel/ixgbe/ixgbe_common.c')
| -rw-r--r-- | drivers/net/ethernet/intel/ixgbe/ixgbe_common.c | 435 |
1 files changed, 211 insertions, 224 deletions
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c index 878dd8dff528..3be1bfb16498 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c @@ -10,10 +10,10 @@ #include "ixgbe_common.h" #include "ixgbe_phy.h" -static s32 ixgbe_acquire_eeprom(struct ixgbe_hw *hw); -static s32 ixgbe_get_eeprom_semaphore(struct ixgbe_hw *hw); +static int ixgbe_acquire_eeprom(struct ixgbe_hw *hw); +static int ixgbe_get_eeprom_semaphore(struct ixgbe_hw *hw); static void ixgbe_release_eeprom_semaphore(struct ixgbe_hw *hw); -static s32 ixgbe_ready_eeprom(struct ixgbe_hw *hw); +static int ixgbe_ready_eeprom(struct ixgbe_hw *hw); static void ixgbe_standby_eeprom(struct ixgbe_hw *hw); static void ixgbe_shift_out_eeprom_bits(struct ixgbe_hw *hw, u16 data, u16 count); @@ -22,15 +22,15 @@ static void ixgbe_raise_eeprom_clk(struct ixgbe_hw *hw, u32 *eec); static void ixgbe_lower_eeprom_clk(struct ixgbe_hw *hw, u32 *eec); static void ixgbe_release_eeprom(struct ixgbe_hw *hw); -static s32 ixgbe_mta_vector(struct ixgbe_hw *hw, u8 *mc_addr); -static s32 ixgbe_poll_eerd_eewr_done(struct ixgbe_hw *hw, u32 ee_reg); -static s32 ixgbe_read_eeprom_buffer_bit_bang(struct ixgbe_hw *hw, u16 offset, +static int ixgbe_mta_vector(struct ixgbe_hw *hw, u8 *mc_addr); +static int ixgbe_poll_eerd_eewr_done(struct ixgbe_hw *hw, u32 ee_reg); +static int ixgbe_read_eeprom_buffer_bit_bang(struct ixgbe_hw *hw, u16 offset, u16 words, u16 *data); -static s32 ixgbe_write_eeprom_buffer_bit_bang(struct ixgbe_hw *hw, u16 offset, - u16 words, u16 *data); -static s32 ixgbe_detect_eeprom_page_size_generic(struct ixgbe_hw *hw, +static int ixgbe_write_eeprom_buffer_bit_bang(struct ixgbe_hw *hw, u16 offset, + u16 words, u16 *data); +static int ixgbe_detect_eeprom_page_size_generic(struct ixgbe_hw *hw, u16 offset); -static s32 ixgbe_disable_pcie_primary(struct ixgbe_hw *hw); +static int ixgbe_disable_pcie_primary(struct ixgbe_hw *hw); /* Base table for registers values that change by MAC */ const u32 ixgbe_mvals_8259X[IXGBE_MVALS_IDX_LIMIT] = { @@ -111,12 +111,12 @@ bool ixgbe_device_supports_autoneg_fc(struct ixgbe_hw *hw) * * Called at init time to set up flow control. **/ -s32 ixgbe_setup_fc_generic(struct ixgbe_hw *hw) +int ixgbe_setup_fc_generic(struct ixgbe_hw *hw) { - s32 ret_val = 0; u32 reg = 0, reg_bp = 0; - u16 reg_cu = 0; bool locked = false; + int ret_val = 0; + u16 reg_cu = 0; /* * Validate the requested mode. Strict IEEE mode does not allow @@ -124,7 +124,7 @@ s32 ixgbe_setup_fc_generic(struct ixgbe_hw *hw) */ if (hw->fc.strict_ieee && hw->fc.requested_mode == ixgbe_fc_rx_pause) { hw_dbg(hw, "ixgbe_fc_rx_pause not valid in strict IEEE mode\n"); - return IXGBE_ERR_INVALID_LINK_SETTINGS; + return -EINVAL; } /* @@ -215,7 +215,7 @@ s32 ixgbe_setup_fc_generic(struct ixgbe_hw *hw) break; default: hw_dbg(hw, "Flow control param set incorrectly\n"); - return IXGBE_ERR_CONFIG; + return -EIO; } if (hw->mac.type != ixgbe_mac_X540) { @@ -267,11 +267,11 @@ s32 ixgbe_setup_fc_generic(struct ixgbe_hw *hw) * table, VLAN filter table, calls routine to set up link and flow control * settings, and leaves transmit and receive units disabled and uninitialized **/ -s32 ixgbe_start_hw_generic(struct ixgbe_hw *hw) +int ixgbe_start_hw_generic(struct ixgbe_hw *hw) { - s32 ret_val; - u32 ctrl_ext; u16 device_caps; + u32 ctrl_ext; + int ret_val; /* Set the media type */ hw->phy.media_type = hw->mac.ops.get_media_type(hw); @@ -330,7 +330,7 @@ s32 ixgbe_start_hw_generic(struct ixgbe_hw *hw) * 82599 * X540 **/ -s32 ixgbe_start_hw_gen2(struct ixgbe_hw *hw) +int ixgbe_start_hw_gen2(struct ixgbe_hw *hw) { u32 i; @@ -354,9 +354,9 @@ s32 ixgbe_start_hw_gen2(struct ixgbe_hw *hw) * up link and flow control settings, and leaves transmit and receive units * disabled and uninitialized **/ -s32 ixgbe_init_hw_generic(struct ixgbe_hw *hw) +int ixgbe_init_hw_generic(struct ixgbe_hw *hw) { - s32 status; + int status; /* Reset the hardware */ status = hw->mac.ops.reset_hw(hw); @@ -380,7 +380,7 @@ s32 ixgbe_init_hw_generic(struct ixgbe_hw *hw) * Clears all hardware statistics counters by reading them from the hardware * Statistics counters are clear on read. **/ -s32 ixgbe_clear_hw_cntrs_generic(struct ixgbe_hw *hw) +int ixgbe_clear_hw_cntrs_generic(struct ixgbe_hw *hw) { u16 i = 0; @@ -489,18 +489,18 @@ s32 ixgbe_clear_hw_cntrs_generic(struct ixgbe_hw *hw) * * Reads the part number string from the EEPROM. **/ -s32 ixgbe_read_pba_string_generic(struct ixgbe_hw *hw, u8 *pba_num, +int ixgbe_read_pba_string_generic(struct ixgbe_hw *hw, u8 *pba_num, u32 pba_num_size) { - s32 ret_val; - u16 data; + int ret_val; u16 pba_ptr; u16 offset; u16 length; + u16 data; if (pba_num == NULL) { hw_dbg(hw, "PBA string buffer was null\n"); - return IXGBE_ERR_INVALID_ARGUMENT; + return -EINVAL; } ret_val = hw->eeprom.ops.read(hw, IXGBE_PBANUM0_PTR, &data); @@ -526,7 +526,7 @@ s32 ixgbe_read_pba_string_generic(struct ixgbe_hw *hw, u8 *pba_num, /* we will need 11 characters to store the PBA */ if (pba_num_size < 11) { hw_dbg(hw, "PBA string buffer too small\n"); - return IXGBE_ERR_NO_SPACE; + return -ENOSPC; } /* extract hex string from data and pba_ptr */ @@ -563,13 +563,13 @@ s32 ixgbe_read_pba_string_generic(struct ixgbe_hw *hw, u8 *pba_num, if (length == 0xFFFF || length == 0) { hw_dbg(hw, "NVM PBA number section invalid length\n"); - return IXGBE_ERR_PBA_SECTION; + return -EIO; } /* check if pba_num buffer is big enough */ if (pba_num_size < (((u32)length * 2) - 1)) { hw_dbg(hw, "PBA string buffer too small\n"); - return IXGBE_ERR_NO_SPACE; + return -ENOSPC; } /* trim pba length from start of string */ @@ -599,7 +599,7 @@ s32 ixgbe_read_pba_string_generic(struct ixgbe_hw *hw, u8 *pba_num, * A reset of the adapter must be performed prior to calling this function * in order for the MAC address to have been loaded from the EEPROM into RAR0 **/ -s32 ixgbe_get_mac_addr_generic(struct ixgbe_hw *hw, u8 *mac_addr) +int ixgbe_get_mac_addr_generic(struct ixgbe_hw *hw, u8 *mac_addr) { u32 rar_high; u32 rar_low; @@ -653,7 +653,7 @@ enum ixgbe_bus_speed ixgbe_convert_bus_speed(u16 link_status) * * Sets the PCI bus info (speed, width, type) within the ixgbe_hw structure **/ -s32 ixgbe_get_bus_info_generic(struct ixgbe_hw *hw) +int ixgbe_get_bus_info_generic(struct ixgbe_hw *hw) { u16 link_status; @@ -684,7 +684,7 @@ void ixgbe_set_lan_id_multi_port_pcie(struct ixgbe_hw *hw) u32 reg; reg = IXGBE_READ_REG(hw, IXGBE_STATUS); - bus->func = (reg & IXGBE_STATUS_LAN_ID) >> IXGBE_STATUS_LAN_ID_SHIFT; + bus->func = FIELD_GET(IXGBE_STATUS_LAN_ID, reg); bus->lan_id = bus->func; /* check for a port swap */ @@ -695,8 +695,8 @@ void ixgbe_set_lan_id_multi_port_pcie(struct ixgbe_hw *hw) /* Get MAC instance from EEPROM for configuring CS4227 */ if (hw->device_id == IXGBE_DEV_ID_X550EM_A_SFP) { hw->eeprom.ops.read(hw, IXGBE_EEPROM_CTRL_4, &ee_ctrl_4); - bus->instance_id = (ee_ctrl_4 & IXGBE_EE_CTRL_4_INST_ID) >> - IXGBE_EE_CTRL_4_INST_ID_SHIFT; + bus->instance_id = FIELD_GET(IXGBE_EE_CTRL_4_INST_ID, + ee_ctrl_4); } } @@ -709,7 +709,7 @@ void ixgbe_set_lan_id_multi_port_pcie(struct ixgbe_hw *hw) * the shared code and drivers to determine if the adapter is in a stopped * state and should not touch the hardware. **/ -s32 ixgbe_stop_adapter_generic(struct ixgbe_hw *hw) +int ixgbe_stop_adapter_generic(struct ixgbe_hw *hw) { u32 reg_val; u16 i; @@ -759,7 +759,7 @@ s32 ixgbe_stop_adapter_generic(struct ixgbe_hw *hw) * Store the index for the link active LED. This will be used to support * blinking the LED. **/ -s32 ixgbe_init_led_link_act_generic(struct ixgbe_hw *hw) +int ixgbe_init_led_link_act_generic(struct ixgbe_hw *hw) { struct ixgbe_mac_info *mac = &hw->mac; u32 led_reg, led_mode; @@ -800,12 +800,12 @@ s32 ixgbe_init_led_link_act_generic(struct ixgbe_hw *hw) * @hw: pointer to hardware structure * @index: led number to turn on **/ -s32 ixgbe_led_on_generic(struct ixgbe_hw *hw, u32 index) +int ixgbe_led_on_generic(struct ixgbe_hw *hw, u32 index) { u32 led_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL); if (index > 3) - return IXGBE_ERR_PARAM; + return -EINVAL; /* To turn on the LED, set mode to ON. */ led_reg &= ~IXGBE_LED_MODE_MASK(index); @@ -821,12 +821,12 @@ s32 ixgbe_led_on_generic(struct ixgbe_hw *hw, u32 index) * @hw: pointer to hardware structure * @index: led number to turn off **/ -s32 ixgbe_led_off_generic(struct ixgbe_hw *hw, u32 index) +int ixgbe_led_off_generic(struct ixgbe_hw *hw, u32 index) { u32 led_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL); if (index > 3) - return IXGBE_ERR_PARAM; + return -EINVAL; /* To turn off the LED, set mode to OFF. */ led_reg &= ~IXGBE_LED_MODE_MASK(index); @@ -844,7 +844,7 @@ s32 ixgbe_led_off_generic(struct ixgbe_hw *hw, u32 index) * Initializes the EEPROM parameters ixgbe_eeprom_info within the * ixgbe_hw struct in order to set up EEPROM access. **/ -s32 ixgbe_init_eeprom_params_generic(struct ixgbe_hw *hw) +int ixgbe_init_eeprom_params_generic(struct ixgbe_hw *hw) { struct ixgbe_eeprom_info *eeprom = &hw->eeprom; u32 eec; @@ -870,10 +870,9 @@ s32 ixgbe_init_eeprom_params_generic(struct ixgbe_hw *hw) * SPI EEPROM is assumed here. This code would need to * change if a future EEPROM is not SPI. */ - eeprom_size = (u16)((eec & IXGBE_EEC_SIZE) >> - IXGBE_EEC_SIZE_SHIFT); + eeprom_size = FIELD_GET(IXGBE_EEC_SIZE, eec); eeprom->word_size = BIT(eeprom_size + - IXGBE_EEPROM_WORD_SIZE_SHIFT); + IXGBE_EEPROM_WORD_SIZE_SHIFT); } if (eec & IXGBE_EEC_ADDR_SIZE) @@ -896,19 +895,16 @@ s32 ixgbe_init_eeprom_params_generic(struct ixgbe_hw *hw) * * Reads 16 bit word(s) from EEPROM through bit-bang method **/ -s32 ixgbe_write_eeprom_buffer_bit_bang_generic(struct ixgbe_hw *hw, u16 offset, +int ixgbe_write_eeprom_buffer_bit_bang_generic(struct ixgbe_hw *hw, u16 offset, u16 words, u16 *data) { - s32 status; u16 i, count; + int status; hw->eeprom.ops.init_params(hw); - if (words == 0) - return IXGBE_ERR_INVALID_ARGUMENT; - - if (offset + words > hw->eeprom.word_size) - return IXGBE_ERR_EEPROM; + if (words == 0 || (offset + words > hw->eeprom.word_size)) + return -EINVAL; /* * The EEPROM page size cannot be queried from the chip. We do lazy @@ -946,14 +942,14 @@ s32 ixgbe_write_eeprom_buffer_bit_bang_generic(struct ixgbe_hw *hw, u16 offset, * If ixgbe_eeprom_update_checksum is not called after this function, the * EEPROM will most likely contain an invalid checksum. **/ -static s32 ixgbe_write_eeprom_buffer_bit_bang(struct ixgbe_hw *hw, u16 offset, +static int ixgbe_write_eeprom_buffer_bit_bang(struct ixgbe_hw *hw, u16 offset, u16 words, u16 *data) { - s32 status; - u16 word; + u8 write_opcode = IXGBE_EEPROM_WRITE_OPCODE_SPI; u16 page_size; + int status; + u16 word; u16 i; - u8 write_opcode = IXGBE_EEPROM_WRITE_OPCODE_SPI; /* Prepare the EEPROM for writing */ status = ixgbe_acquire_eeprom(hw); @@ -962,7 +958,7 @@ static s32 ixgbe_write_eeprom_buffer_bit_bang(struct ixgbe_hw *hw, u16 offset, if (ixgbe_ready_eeprom(hw) != 0) { ixgbe_release_eeprom(hw); - return IXGBE_ERR_EEPROM; + return -EIO; } for (i = 0; i < words; i++) { @@ -1023,12 +1019,12 @@ static s32 ixgbe_write_eeprom_buffer_bit_bang(struct ixgbe_hw *hw, u16 offset, * If ixgbe_eeprom_update_checksum is not called after this function, the * EEPROM will most likely contain an invalid checksum. **/ -s32 ixgbe_write_eeprom_generic(struct ixgbe_hw *hw, u16 offset, u16 data) +int ixgbe_write_eeprom_generic(struct ixgbe_hw *hw, u16 offset, u16 data) { hw->eeprom.ops.init_params(hw); if (offset >= hw->eeprom.word_size) - return IXGBE_ERR_EEPROM; + return -EINVAL; return ixgbe_write_eeprom_buffer_bit_bang(hw, offset, 1, &data); } @@ -1042,19 +1038,16 @@ s32 ixgbe_write_eeprom_generic(struct ixgbe_hw *hw, u16 offset, u16 data) * * Reads 16 bit word(s) from EEPROM through bit-bang method **/ -s32 ixgbe_read_eeprom_buffer_bit_bang_generic(struct ixgbe_hw *hw, u16 offset, +int ixgbe_read_eeprom_buffer_bit_bang_generic(struct ixgbe_hw *hw, u16 offset, u16 words, u16 *data) { - s32 status; u16 i, count; + int status; hw->eeprom.ops.init_params(hw); - if (words == 0) - return IXGBE_ERR_INVALID_ARGUMENT; - - if (offset + words > hw->eeprom.word_size) - return IXGBE_ERR_EEPROM; + if (words == 0 || (offset + words > hw->eeprom.word_size)) + return -EINVAL; /* * We cannot hold synchronization semaphores for too long @@ -1084,12 +1077,12 @@ s32 ixgbe_read_eeprom_buffer_bit_bang_generic(struct ixgbe_hw *hw, u16 offset, * * Reads 16 bit word(s) from EEPROM through bit-bang method **/ -static s32 ixgbe_read_eeprom_buffer_bit_bang(struct ixgbe_hw *hw, u16 offset, +static int ixgbe_read_eeprom_buffer_bit_bang(struct ixgbe_hw *hw, u16 offset, u16 words, u16 *data) { - s32 status; - u16 word_in; u8 read_opcode = IXGBE_EEPROM_READ_OPCODE_SPI; + u16 word_in; + int status; u16 i; /* Prepare the EEPROM for reading */ @@ -1099,7 +1092,7 @@ static s32 ixgbe_read_eeprom_buffer_bit_bang(struct ixgbe_hw *hw, u16 offset, if (ixgbe_ready_eeprom(hw) != 0) { ixgbe_release_eeprom(hw); - return IXGBE_ERR_EEPROM; + return -EIO; } for (i = 0; i < words; i++) { @@ -1136,13 +1129,13 @@ static s32 ixgbe_read_eeprom_buffer_bit_bang(struct ixgbe_hw *hw, u16 offset, * * Reads 16 bit value from EEPROM through bit-bang method **/ -s32 ixgbe_read_eeprom_bit_bang_generic(struct ixgbe_hw *hw, u16 offset, +int ixgbe_read_eeprom_bit_bang_generic(struct ixgbe_hw *hw, u16 offset, u16 *data) { hw->eeprom.ops.init_params(hw); if (offset >= hw->eeprom.word_size) - return IXGBE_ERR_EEPROM; + return -EINVAL; return ixgbe_read_eeprom_buffer_bit_bang(hw, offset, 1, data); } @@ -1156,20 +1149,17 @@ s32 ixgbe_read_eeprom_bit_bang_generic(struct ixgbe_hw *hw, u16 offset, * * Reads a 16 bit word(s) from the EEPROM using the EERD register. **/ -s32 ixgbe_read_eerd_buffer_generic(struct ixgbe_hw *hw, u16 offset, +int ixgbe_read_eerd_buffer_generic(struct ixgbe_hw *hw, u16 offset, u16 words, u16 *data) { + int status; u32 eerd; - s32 status; u32 i; hw->eeprom.ops.init_params(hw); - if (words == 0) - return IXGBE_ERR_INVALID_ARGUMENT; - - if (offset >= hw->eeprom.word_size) - return IXGBE_ERR_EEPROM; + if (words == 0 || offset >= hw->eeprom.word_size) + return -EINVAL; for (i = 0; i < words; i++) { eerd = ((offset + i) << IXGBE_EEPROM_RW_ADDR_SHIFT) | @@ -1199,11 +1189,11 @@ s32 ixgbe_read_eerd_buffer_generic(struct ixgbe_hw *hw, u16 offset, * This function is called only when we are writing a new large buffer * at given offset so the data would be overwritten anyway. **/ -static s32 ixgbe_detect_eeprom_page_size_generic(struct ixgbe_hw *hw, +static int ixgbe_detect_eeprom_page_size_generic(struct ixgbe_hw *hw, u16 offset) { u16 data[IXGBE_EEPROM_PAGE_SIZE_MAX]; - s32 status; + int status; u16 i; for (i = 0; i < IXGBE_EEPROM_PAGE_SIZE_MAX; i++) @@ -1239,7 +1229,7 @@ static s32 ixgbe_detect_eeprom_page_size_generic(struct ixgbe_hw *hw, * * Reads a 16 bit word from the EEPROM using the EERD register. **/ -s32 ixgbe_read_eerd_generic(struct ixgbe_hw *hw, u16 offset, u16 *data) +int ixgbe_read_eerd_generic(struct ixgbe_hw *hw, u16 offset, u16 *data) { return ixgbe_read_eerd_buffer_generic(hw, offset, 1, data); } @@ -1253,20 +1243,17 @@ s32 ixgbe_read_eerd_generic(struct ixgbe_hw *hw, u16 offset, u16 *data) * * Write a 16 bit word(s) to the EEPROM using the EEWR register. **/ -s32 ixgbe_write_eewr_buffer_generic(struct ixgbe_hw *hw, u16 offset, +int ixgbe_write_eewr_buffer_generic(struct ixgbe_hw *hw, u16 offset, u16 words, u16 *data) { + int status; u32 eewr; - s32 status; u16 i; hw->eeprom.ops.init_params(hw); - if (words == 0) - return IXGBE_ERR_INVALID_ARGUMENT; - - if (offset >= hw->eeprom.word_size) - return IXGBE_ERR_EEPROM; + if (words == 0 || offset >= hw->eeprom.word_size) + return -EINVAL; for (i = 0; i < words; i++) { eewr = ((offset + i) << IXGBE_EEPROM_RW_ADDR_SHIFT) | @@ -1299,7 +1286,7 @@ s32 ixgbe_write_eewr_buffer_generic(struct ixgbe_hw *hw, u16 offset, * * Write a 16 bit word to the EEPROM using the EEWR register. **/ -s32 ixgbe_write_eewr_generic(struct ixgbe_hw *hw, u16 offset, u16 data) +int ixgbe_write_eewr_generic(struct ixgbe_hw *hw, u16 offset, u16 data) { return ixgbe_write_eewr_buffer_generic(hw, offset, 1, &data); } @@ -1312,7 +1299,7 @@ s32 ixgbe_write_eewr_generic(struct ixgbe_hw *hw, u16 offset, u16 data) * Polls the status bit (bit 1) of the EERD or EEWR to determine when the * read or write is done respectively. **/ -static s32 ixgbe_poll_eerd_eewr_done(struct ixgbe_hw *hw, u32 ee_reg) +static int ixgbe_poll_eerd_eewr_done(struct ixgbe_hw *hw, u32 ee_reg) { u32 i; u32 reg; @@ -1328,7 +1315,7 @@ static s32 ixgbe_poll_eerd_eewr_done(struct ixgbe_hw *hw, u32 ee_reg) } udelay(5); } - return IXGBE_ERR_EEPROM; + return -EIO; } /** @@ -1338,13 +1325,13 @@ static s32 ixgbe_poll_eerd_eewr_done(struct ixgbe_hw *hw, u32 ee_reg) * Prepares EEPROM for access using bit-bang method. This function should * be called before issuing a command to the EEPROM. **/ -static s32 ixgbe_acquire_eeprom(struct ixgbe_hw *hw) +static int ixgbe_acquire_eeprom(struct ixgbe_hw *hw) { u32 eec; u32 i; if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM) != 0) - return IXGBE_ERR_SWFW_SYNC; + return -EBUSY; eec = IXGBE_READ_REG(hw, IXGBE_EEC(hw)); @@ -1366,7 +1353,7 @@ static s32 ixgbe_acquire_eeprom(struct ixgbe_hw *hw) hw_dbg(hw, "Could not acquire EEPROM grant\n"); hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM); - return IXGBE_ERR_EEPROM; + return -EIO; } /* Setup EEPROM for Read/Write */ @@ -1384,7 +1371,7 @@ static s32 ixgbe_acquire_eeprom(struct ixgbe_hw *hw) * * Sets the hardware semaphores so EEPROM access can occur for bit-bang method **/ -static s32 ixgbe_get_eeprom_semaphore(struct ixgbe_hw *hw) +static int ixgbe_get_eeprom_semaphore(struct ixgbe_hw *hw) { u32 timeout = 2000; u32 i; @@ -1419,7 +1406,7 @@ static s32 ixgbe_get_eeprom_semaphore(struct ixgbe_hw *hw) swsm = IXGBE_READ_REG(hw, IXGBE_SWSM(hw)); if (swsm & IXGBE_SWSM_SMBI) { hw_dbg(hw, "Software semaphore SMBI between device drivers not granted.\n"); - return IXGBE_ERR_EEPROM; + return -EIO; } } @@ -1447,7 +1434,7 @@ static s32 ixgbe_get_eeprom_semaphore(struct ixgbe_hw *hw) if (i >= timeout) { hw_dbg(hw, "SWESMBI Software EEPROM semaphore not granted.\n"); ixgbe_release_eeprom_semaphore(hw); - return IXGBE_ERR_EEPROM; + return -EIO; } return 0; @@ -1475,7 +1462,7 @@ static void ixgbe_release_eeprom_semaphore(struct ixgbe_hw *hw) * ixgbe_ready_eeprom - Polls for EEPROM ready * @hw: pointer to hardware structure **/ -static s32 ixgbe_ready_eeprom(struct ixgbe_hw *hw) +static int ixgbe_ready_eeprom(struct ixgbe_hw *hw) { u16 i; u8 spi_stat_reg; @@ -1503,7 +1490,7 @@ static s32 ixgbe_ready_eeprom(struct ixgbe_hw *hw) */ if (i >= IXGBE_EEPROM_MAX_RETRY_SPI) { hw_dbg(hw, "SPI EEPROM Status error\n"); - return IXGBE_ERR_EEPROM; + return -EIO; } return 0; @@ -1693,7 +1680,7 @@ static void ixgbe_release_eeprom(struct ixgbe_hw *hw) * ixgbe_calc_eeprom_checksum_generic - Calculates and returns the checksum * @hw: pointer to hardware structure **/ -s32 ixgbe_calc_eeprom_checksum_generic(struct ixgbe_hw *hw) +int ixgbe_calc_eeprom_checksum_generic(struct ixgbe_hw *hw) { u16 i; u16 j; @@ -1715,7 +1702,7 @@ s32 ixgbe_calc_eeprom_checksum_generic(struct ixgbe_hw *hw) for (i = IXGBE_PCIE_ANALOG_PTR; i < IXGBE_FW_PTR; i++) { if (hw->eeprom.ops.read(hw, i, &pointer)) { hw_dbg(hw, "EEPROM read failed\n"); - return IXGBE_ERR_EEPROM; + return -EIO; } /* If the pointer seems invalid */ @@ -1724,7 +1711,7 @@ s32 ixgbe_calc_eeprom_checksum_generic(struct ixgbe_hw *hw) if (hw->eeprom.ops.read(hw, pointer, &length)) { hw_dbg(hw, "EEPROM read failed\n"); - return IXGBE_ERR_EEPROM; + return -EIO; } if (length == 0xFFFF || length == 0) @@ -1733,7 +1720,7 @@ s32 ixgbe_calc_eeprom_checksum_generic(struct ixgbe_hw *hw) for (j = pointer + 1; j <= pointer + length; j++) { if (hw->eeprom.ops.read(hw, j, &word)) { hw_dbg(hw, "EEPROM read failed\n"); - return IXGBE_ERR_EEPROM; + return -EIO; } checksum += word; } @@ -1741,7 +1728,7 @@ s32 ixgbe_calc_eeprom_checksum_generic(struct ixgbe_hw *hw) checksum = (u16)IXGBE_EEPROM_SUM - checksum; - return (s32)checksum; + return (int)checksum; } /** @@ -1752,12 +1739,12 @@ s32 ixgbe_calc_eeprom_checksum_generic(struct ixgbe_hw *hw) * Performs checksum calculation and validates the EEPROM checksum. If the * caller does not need checksum_val, the value can be NULL. **/ -s32 ixgbe_validate_eeprom_checksum_generic(struct ixgbe_hw *hw, +int ixgbe_validate_eeprom_checksum_generic(struct ixgbe_hw *hw, u16 *checksum_val) { - s32 status; - u16 checksum; u16 read_checksum = 0; + u16 checksum; + int status; /* * Read the first word from the EEPROM. If this times out or fails, do @@ -1786,7 +1773,7 @@ s32 ixgbe_validate_eeprom_checksum_generic(struct ixgbe_hw *hw, * calculated checksum */ if (read_checksum != checksum) - status = IXGBE_ERR_EEPROM_CHECKSUM; + status = -EIO; /* If the user cares, return the calculated checksum */ if (checksum_val) @@ -1799,10 +1786,10 @@ s32 ixgbe_validate_eeprom_checksum_generic(struct ixgbe_hw *hw, * ixgbe_update_eeprom_checksum_generic - Updates the EEPROM checksum * @hw: pointer to hardware structure **/ -s32 ixgbe_update_eeprom_checksum_generic(struct ixgbe_hw *hw) +int ixgbe_update_eeprom_checksum_generic(struct ixgbe_hw *hw) { - s32 status; u16 checksum; + int status; /* * Read the first word from the EEPROM. If this times out or fails, do @@ -1836,7 +1823,7 @@ s32 ixgbe_update_eeprom_checksum_generic(struct ixgbe_hw *hw) * * Puts an ethernet address into a receive address register. **/ -s32 ixgbe_set_rar_generic(struct ixgbe_hw *hw, u32 index, u8 *addr, u32 vmdq, +int ixgbe_set_rar_generic(struct ixgbe_hw *hw, u32 index, u8 *addr, u32 vmdq, u32 enable_addr) { u32 rar_low, rar_high; @@ -1845,7 +1832,7 @@ s32 ixgbe_set_rar_generic(struct ixgbe_hw *hw, u32 index, u8 *addr, u32 vmdq, /* Make sure we are using a valid rar index range */ if (index >= rar_entries) { hw_dbg(hw, "RAR index %d is out of range.\n", index); - return IXGBE_ERR_INVALID_ARGUMENT; + return -EINVAL; } /* setup VMDq pool selection before this RAR gets enabled */ @@ -1889,7 +1876,7 @@ s32 ixgbe_set_rar_generic(struct ixgbe_hw *hw, u32 index, u8 *addr, u32 vmdq, * * Clears an ethernet address from a receive address register. **/ -s32 ixgbe_clear_rar_generic(struct ixgbe_hw *hw, u32 index) +int ixgbe_clear_rar_generic(struct ixgbe_hw *hw, u32 index) { u32 rar_high; u32 rar_entries = hw->mac.num_rar_entries; @@ -1897,7 +1884,7 @@ s32 ixgbe_clear_rar_generic(struct ixgbe_hw *hw, u32 index) /* Make sure we are using a valid rar index range */ if (index >= rar_entries) { hw_dbg(hw, "RAR index %d is out of range.\n", index); - return IXGBE_ERR_INVALID_ARGUMENT; + return -EINVAL; } /* @@ -1930,7 +1917,7 @@ s32 ixgbe_clear_rar_generic(struct ixgbe_hw *hw, u32 index) * of the receive address registers. Clears the multicast table. Assumes * the receiver is in reset when the routine is called. **/ -s32 ixgbe_init_rx_addrs_generic(struct ixgbe_hw *hw) +int ixgbe_init_rx_addrs_generic(struct ixgbe_hw *hw) { u32 i; u32 rar_entries = hw->mac.num_rar_entries; @@ -1993,7 +1980,7 @@ s32 ixgbe_init_rx_addrs_generic(struct ixgbe_hw *hw) * by the MO field of the MCSTCTRL. The MO field is set during initialization * to mc_filter_type. **/ -static s32 ixgbe_mta_vector(struct ixgbe_hw *hw, u8 *mc_addr) +static int ixgbe_mta_vector(struct ixgbe_hw *hw, u8 *mc_addr) { u32 vector = 0; @@ -2062,7 +2049,7 @@ static void ixgbe_set_mta(struct ixgbe_hw *hw, u8 *mc_addr) * registers for the first multicast addresses, and hashes the rest into the * multicast table. **/ -s32 ixgbe_update_mc_addr_list_generic(struct ixgbe_hw *hw, +int ixgbe_update_mc_addr_list_generic(struct ixgbe_hw *hw, struct net_device *netdev) { struct netdev_hw_addr *ha; @@ -2104,7 +2091,7 @@ s32 ixgbe_update_mc_addr_list_generic(struct ixgbe_hw *hw, * * Enables multicast address in RAR and the use of the multicast hash table. **/ -s32 ixgbe_enable_mc_generic(struct ixgbe_hw *hw) +int ixgbe_enable_mc_generic(struct ixgbe_hw *hw) { struct ixgbe_addr_filter_info *a = &hw->addr_ctrl; @@ -2121,7 +2108,7 @@ s32 ixgbe_enable_mc_generic(struct ixgbe_hw *hw) * * Disables multicast address in RAR and the use of the multicast hash table. **/ -s32 ixgbe_disable_mc_generic(struct ixgbe_hw *hw) +int ixgbe_disable_mc_generic(struct ixgbe_hw *hw) { struct ixgbe_addr_filter_info *a = &hw->addr_ctrl; @@ -2137,7 +2124,7 @@ s32 ixgbe_disable_mc_generic(struct ixgbe_hw *hw) * * Enable flow control according to the current settings. **/ -s32 ixgbe_fc_enable_generic(struct ixgbe_hw *hw) +int ixgbe_fc_enable_generic(struct ixgbe_hw *hw) { u32 mflcn_reg, fccfg_reg; u32 reg; @@ -2146,7 +2133,7 @@ s32 ixgbe_fc_enable_generic(struct ixgbe_hw *hw) /* Validate the water mark configuration. */ if (!hw->fc.pause_time) - return IXGBE_ERR_INVALID_LINK_SETTINGS; + return -EINVAL; /* Low water mark of zero causes XOFF floods */ for (i = 0; i < MAX_TRAFFIC_CLASS; i++) { @@ -2155,7 +2142,7 @@ s32 ixgbe_fc_enable_generic(struct ixgbe_hw *hw) if (!hw->fc.low_water[i] || hw->fc.low_water[i] >= hw->fc.high_water[i]) { hw_dbg(hw, "Invalid water mark configuration\n"); - return IXGBE_ERR_INVALID_LINK_SETTINGS; + return -EINVAL; } } } @@ -2212,7 +2199,7 @@ s32 ixgbe_fc_enable_generic(struct ixgbe_hw *hw) break; default: hw_dbg(hw, "Flow control param set incorrectly\n"); - return IXGBE_ERR_CONFIG; + return -EIO; } /* Set 802.3x based flow control settings. */ @@ -2265,11 +2252,11 @@ s32 ixgbe_fc_enable_generic(struct ixgbe_hw *hw) * Find the intersection between advertised settings and link partner's * advertised settings **/ -s32 ixgbe_negotiate_fc(struct ixgbe_hw *hw, u32 adv_reg, u32 lp_reg, +int ixgbe_negotiate_fc(struct ixgbe_hw *hw, u32 adv_reg, u32 lp_reg, u32 adv_sym, u32 adv_asm, u32 lp_sym, u32 lp_asm) { if ((!(adv_reg)) || (!(lp_reg))) - return IXGBE_ERR_FC_NOT_NEGOTIATED; + return -EINVAL; if ((adv_reg & adv_sym) && (lp_reg & lp_sym)) { /* @@ -2307,10 +2294,10 @@ s32 ixgbe_negotiate_fc(struct ixgbe_hw *hw, u32 adv_reg, u32 lp_reg, * * Enable flow control according on 1 gig fiber. **/ -static s32 ixgbe_fc_autoneg_fiber(struct ixgbe_hw *hw) +static int ixgbe_fc_autoneg_fiber(struct ixgbe_hw *hw) { u32 pcs_anadv_reg, pcs_lpab_reg, linkstat; - s32 ret_val; + int ret_val; /* * On multispeed fiber at 1g, bail out if @@ -2321,7 +2308,7 @@ static s32 ixgbe_fc_autoneg_fiber(struct ixgbe_hw *hw) linkstat = IXGBE_READ_REG(hw, IXGBE_PCS1GLSTA); if ((!!(linkstat & IXGBE_PCS1GLSTA_AN_COMPLETE) == 0) || (!!(linkstat & IXGBE_PCS1GLSTA_AN_TIMED_OUT) == 1)) - return IXGBE_ERR_FC_NOT_NEGOTIATED; + return -EIO; pcs_anadv_reg = IXGBE_READ_REG(hw, IXGBE_PCS1GANA); pcs_lpab_reg = IXGBE_READ_REG(hw, IXGBE_PCS1GANLP); @@ -2341,10 +2328,10 @@ static s32 ixgbe_fc_autoneg_fiber(struct ixgbe_hw *hw) * * Enable flow control according to IEEE clause 37. **/ -static s32 ixgbe_fc_autoneg_backplane(struct ixgbe_hw *hw) +static int ixgbe_fc_autoneg_backplane(struct ixgbe_hw *hw) { u32 links2, anlp1_reg, autoc_reg, links; - s32 ret_val; + int ret_val; /* * On backplane, bail out if @@ -2353,12 +2340,12 @@ static s32 ixgbe_fc_autoneg_backplane(struct ixgbe_hw *hw) */ links = IXGBE_READ_REG(hw, IXGBE_LINKS); if ((links & IXGBE_LINKS_KX_AN_COMP) == 0) - return IXGBE_ERR_FC_NOT_NEGOTIATED; + return -EIO; if (hw->mac.type == ixgbe_mac_82599EB) { links2 = IXGBE_READ_REG(hw, IXGBE_LINKS2); if ((links2 & IXGBE_LINKS2_AN_SUPPORTED) == 0) - return IXGBE_ERR_FC_NOT_NEGOTIATED; + return -EIO; } /* * Read the 10g AN autoc and LP ability registers and resolve @@ -2380,7 +2367,7 @@ static s32 ixgbe_fc_autoneg_backplane(struct ixgbe_hw *hw) * * Enable flow control according to IEEE clause 37. **/ -static s32 ixgbe_fc_autoneg_copper(struct ixgbe_hw *hw) +static int ixgbe_fc_autoneg_copper(struct ixgbe_hw *hw) { u16 technology_ability_reg = 0; u16 lp_technology_ability_reg = 0; @@ -2407,8 +2394,8 @@ static s32 ixgbe_fc_autoneg_copper(struct ixgbe_hw *hw) **/ void ixgbe_fc_autoneg(struct ixgbe_hw *hw) { - s32 ret_val = IXGBE_ERR_FC_NOT_NEGOTIATED; ixgbe_link_speed speed; + int ret_val = -EIO; bool link_up; /* @@ -2510,11 +2497,11 @@ static u32 ixgbe_pcie_timeout_poll(struct ixgbe_hw *hw) * @hw: pointer to hardware structure * * Disables PCI-Express primary access and verifies there are no pending - * requests. IXGBE_ERR_PRIMARY_REQUESTS_PENDING is returned if primary disable + * requests. -EALREADY is returned if primary disable * bit hasn't caused the primary requests to be disabled, else 0 * is returned signifying primary requests disabled. **/ -static s32 ixgbe_disable_pcie_primary(struct ixgbe_hw *hw) +static int ixgbe_disable_pcie_primary(struct ixgbe_hw *hw) { u32 i, poll; u16 value; @@ -2575,7 +2562,7 @@ gio_disable_fail: } hw_dbg(hw, "PCIe transaction pending bit also did not clear.\n"); - return IXGBE_ERR_PRIMARY_REQUESTS_PENDING; + return -EALREADY; } /** @@ -2586,7 +2573,7 @@ gio_disable_fail: * Acquires the SWFW semaphore through the GSSR register for the specified * function (CSR, PHY0, PHY1, EEPROM, Flash) **/ -s32 ixgbe_acquire_swfw_sync(struct ixgbe_hw *hw, u32 mask) +int ixgbe_acquire_swfw_sync(struct ixgbe_hw *hw, u32 mask) { u32 gssr = 0; u32 swmask = mask; @@ -2600,7 +2587,7 @@ s32 ixgbe_acquire_swfw_sync(struct ixgbe_hw *hw, u32 mask) * SW_FW_SYNC bits (not just NVM) */ if (ixgbe_get_eeprom_semaphore(hw)) - return IXGBE_ERR_SWFW_SYNC; + return -EBUSY; gssr = IXGBE_READ_REG(hw, IXGBE_GSSR); if (!(gssr & (fwmask | swmask))) { @@ -2620,7 +2607,7 @@ s32 ixgbe_acquire_swfw_sync(struct ixgbe_hw *hw, u32 mask) ixgbe_release_swfw_sync(hw, gssr & (fwmask | swmask)); usleep_range(5000, 10000); - return IXGBE_ERR_SWFW_SYNC; + return -EBUSY; } /** @@ -2654,7 +2641,7 @@ void ixgbe_release_swfw_sync(struct ixgbe_hw *hw, u32 mask) * * The default case requires no protection so just to the register read. **/ -s32 prot_autoc_read_generic(struct ixgbe_hw *hw, bool *locked, u32 *reg_val) +int prot_autoc_read_generic(struct ixgbe_hw *hw, bool *locked, u32 *reg_val) { *locked = false; *reg_val = IXGBE_READ_REG(hw, IXGBE_AUTOC); @@ -2668,7 +2655,7 @@ s32 prot_autoc_read_generic(struct ixgbe_hw *hw, bool *locked, u32 *reg_val) * @locked: bool to indicate whether the SW/FW lock was already taken by * previous read. **/ -s32 prot_autoc_write_generic(struct ixgbe_hw *hw, u32 reg_val, bool locked) +int prot_autoc_write_generic(struct ixgbe_hw *hw, u32 reg_val, bool locked) { IXGBE_WRITE_REG(hw, IXGBE_AUTOC, reg_val); return 0; @@ -2681,7 +2668,7 @@ s32 prot_autoc_write_generic(struct ixgbe_hw *hw, u32 reg_val, bool locked) * Stops the receive data path and waits for the HW to internally * empty the Rx security block. **/ -s32 ixgbe_disable_rx_buff_generic(struct ixgbe_hw *hw) +int ixgbe_disable_rx_buff_generic(struct ixgbe_hw *hw) { #define IXGBE_MAX_SECRX_POLL 40 int i; @@ -2713,7 +2700,7 @@ s32 ixgbe_disable_rx_buff_generic(struct ixgbe_hw *hw) * * Enables the receive data path **/ -s32 ixgbe_enable_rx_buff_generic(struct ixgbe_hw *hw) +int ixgbe_enable_rx_buff_generic(struct ixgbe_hw *hw) { u32 secrxreg; @@ -2732,7 +2719,7 @@ s32 ixgbe_enable_rx_buff_generic(struct ixgbe_hw *hw) * * Enables the Rx DMA unit **/ -s32 ixgbe_enable_rx_dma_generic(struct ixgbe_hw *hw, u32 regval) +int ixgbe_enable_rx_dma_generic(struct ixgbe_hw *hw, u32 regval) { if (regval & IXGBE_RXCTRL_RXEN) hw->mac.ops.enable_rx(hw); @@ -2747,17 +2734,17 @@ s32 ixgbe_enable_rx_dma_generic(struct ixgbe_hw *hw, u32 regval) * @hw: pointer to hardware structure * @index: led number to blink **/ -s32 ixgbe_blink_led_start_generic(struct ixgbe_hw *hw, u32 index) +int ixgbe_blink_led_start_generic(struct ixgbe_hw *hw, u32 index) { - ixgbe_link_speed speed = 0; - bool link_up = false; u32 autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC); u32 led_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL); + ixgbe_link_speed speed = 0; + bool link_up = false; bool locked = false; - s32 ret_val; + int ret_val; if (index > 3) - return IXGBE_ERR_PARAM; + return -EINVAL; /* * Link must be up to auto-blink the LEDs; @@ -2795,15 +2782,15 @@ s32 ixgbe_blink_led_start_generic(struct ixgbe_hw *hw, u32 index) * @hw: pointer to hardware structure * @index: led number to stop blinking **/ -s32 ixgbe_blink_led_stop_generic(struct ixgbe_hw *hw, u32 index) +int ixgbe_blink_led_stop_generic(struct ixgbe_hw *hw, u32 index) { - u32 autoc_reg = 0; u32 led_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL); bool locked = false; - s32 ret_val; + u32 autoc_reg = 0; + int ret_val; if (index > 3) - return IXGBE_ERR_PARAM; + return -EINVAL; ret_val = hw->mac.ops.prot_autoc_read(hw, &locked, &autoc_reg); if (ret_val) @@ -2834,10 +2821,10 @@ s32 ixgbe_blink_led_stop_generic(struct ixgbe_hw *hw, u32 index) * pointer, and returns the value at that location. This is used in both * get and set mac_addr routines. **/ -static s32 ixgbe_get_san_mac_addr_offset(struct ixgbe_hw *hw, - u16 *san_mac_offset) +static int ixgbe_get_san_mac_addr_offset(struct ixgbe_hw *hw, + u16 *san_mac_offset) { - s32 ret_val; + int ret_val; /* * First read the EEPROM pointer to see if the MAC addresses are @@ -2862,11 +2849,11 @@ static s32 ixgbe_get_san_mac_addr_offset(struct ixgbe_hw *hw, * set_lan_id() is called by identify_sfp(), but this cannot be relied * upon for non-SFP connections, so we must call it here. **/ -s32 ixgbe_get_san_mac_addr_generic(struct ixgbe_hw *hw, u8 *san_mac_addr) +int ixgbe_get_san_mac_addr_generic(struct ixgbe_hw *hw, u8 *san_mac_addr) { u16 san_mac_data, san_mac_offset; + int ret_val; u8 i; - s32 ret_val; /* * First read the EEPROM pointer to see if the MAC addresses are @@ -2955,7 +2942,7 @@ u16 ixgbe_get_pcie_msix_count_generic(struct ixgbe_hw *hw) * @rar: receive address register index to disassociate * @vmdq: VMDq pool index to remove from the rar **/ -s32 ixgbe_clear_vmdq_generic(struct ixgbe_hw *hw, u32 rar, u32 vmdq) +int ixgbe_clear_vmdq_generic(struct ixgbe_hw *hw, u32 rar, u32 vmdq) { u32 mpsar_lo, mpsar_hi; u32 rar_entries = hw->mac.num_rar_entries; @@ -2963,7 +2950,7 @@ s32 ixgbe_clear_vmdq_generic(struct ixgbe_hw *hw, u32 rar, u32 vmdq) /* Make sure we are using a valid rar index range */ if (rar >= rar_entries) { hw_dbg(hw, "RAR index %d is out of range.\n", rar); - return IXGBE_ERR_INVALID_ARGUMENT; + return -EINVAL; } mpsar_lo = IXGBE_READ_REG(hw, IXGBE_MPSAR_LO(rar)); @@ -3006,7 +2993,7 @@ s32 ixgbe_clear_vmdq_generic(struct ixgbe_hw *hw, u32 rar, u32 vmdq) * @rar: receive address register index to associate with a VMDq index * @vmdq: VMDq pool index **/ -s32 ixgbe_set_vmdq_generic(struct ixgbe_hw *hw, u32 rar, u32 vmdq) +int ixgbe_set_vmdq_generic(struct ixgbe_hw *hw, u32 rar, u32 vmdq) { u32 mpsar; u32 rar_entries = hw->mac.num_rar_entries; @@ -3014,7 +3001,7 @@ s32 ixgbe_set_vmdq_generic(struct ixgbe_hw *hw, u32 rar, u32 vmdq) /* Make sure we are using a valid rar index range */ if (rar >= rar_entries) { hw_dbg(hw, "RAR index %d is out of range.\n", rar); - return IXGBE_ERR_INVALID_ARGUMENT; + return -EINVAL; } if (vmdq < 32) { @@ -3039,7 +3026,7 @@ s32 ixgbe_set_vmdq_generic(struct ixgbe_hw *hw, u32 rar, u32 vmdq) * VFs advertized and not 0. * MPSAR table needs to be updated for SAN_MAC RAR [hw->mac.san_mac_rar_index] **/ -s32 ixgbe_set_vmdq_san_mac_generic(struct ixgbe_hw *hw, u32 vmdq) +int ixgbe_set_vmdq_san_mac_generic(struct ixgbe_hw *hw, u32 vmdq) { u32 rar = hw->mac.san_mac_rar_index; @@ -3058,7 +3045,7 @@ s32 ixgbe_set_vmdq_san_mac_generic(struct ixgbe_hw *hw, u32 vmdq) * ixgbe_init_uta_tables_generic - Initialize the Unicast Table Array * @hw: pointer to hardware structure **/ -s32 ixgbe_init_uta_tables_generic(struct ixgbe_hw *hw) +int ixgbe_init_uta_tables_generic(struct ixgbe_hw *hw) { int i; @@ -3078,9 +3065,9 @@ s32 ixgbe_init_uta_tables_generic(struct ixgbe_hw *hw) * return the VLVF index where this VLAN id should be placed * **/ -static s32 ixgbe_find_vlvf_slot(struct ixgbe_hw *hw, u32 vlan, bool vlvf_bypass) +static int ixgbe_find_vlvf_slot(struct ixgbe_hw *hw, u32 vlan, bool vlvf_bypass) { - s32 regindex, first_empty_slot; + int regindex, first_empty_slot; u32 bits; /* short cut the special case */ @@ -3091,7 +3078,7 @@ static s32 ixgbe_find_vlvf_slot(struct ixgbe_hw *hw, u32 vlan, bool vlvf_bypass) * will simply bypass the VLVF if there are no entries present in the * VLVF that contain our VLAN */ - first_empty_slot = vlvf_bypass ? IXGBE_ERR_NO_SPACE : 0; + first_empty_slot = vlvf_bypass ? -ENOSPC : 0; /* add VLAN enable bit for comparison */ vlan |= IXGBE_VLVF_VIEN; @@ -3115,7 +3102,7 @@ static s32 ixgbe_find_vlvf_slot(struct ixgbe_hw *hw, u32 vlan, bool vlvf_bypass) if (!first_empty_slot) hw_dbg(hw, "No space in VLVF.\n"); - return first_empty_slot ? : IXGBE_ERR_NO_SPACE; + return first_empty_slot ? : -ENOSPC; } /** @@ -3128,14 +3115,14 @@ static s32 ixgbe_find_vlvf_slot(struct ixgbe_hw *hw, u32 vlan, bool vlvf_bypass) * * Turn on/off specified VLAN in the VLAN filter table. **/ -s32 ixgbe_set_vfta_generic(struct ixgbe_hw *hw, u32 vlan, u32 vind, +int ixgbe_set_vfta_generic(struct ixgbe_hw *hw, u32 vlan, u32 vind, bool vlan_on, bool vlvf_bypass) { u32 regidx, vfta_delta, vfta, bits; - s32 vlvf_index; + int vlvf_index; if ((vlan > 4095) || (vind > 63)) - return IXGBE_ERR_PARAM; + return -EINVAL; /* * this is a 2 part operation - first the VFTA, then the @@ -3239,7 +3226,7 @@ vfta_update: * * Clears the VLAN filter table, and the VMDq index associated with the filter **/ -s32 ixgbe_clear_vfta_generic(struct ixgbe_hw *hw) +int ixgbe_clear_vfta_generic(struct ixgbe_hw *hw) { u32 offset; @@ -3289,7 +3276,7 @@ static bool ixgbe_need_crosstalk_fix(struct ixgbe_hw *hw) * * Reads the links register to determine if link is up and the current speed **/ -s32 ixgbe_check_mac_link_generic(struct ixgbe_hw *hw, ixgbe_link_speed *speed, +int ixgbe_check_mac_link_generic(struct ixgbe_hw *hw, ixgbe_link_speed *speed, bool *link_up, bool link_up_wait_to_complete) { bool crosstalk_fix_active = ixgbe_need_crosstalk_fix(hw); @@ -3409,8 +3396,8 @@ s32 ixgbe_check_mac_link_generic(struct ixgbe_hw *hw, ixgbe_link_speed *speed, * This function will read the EEPROM from the alternative SAN MAC address * block to check the support for the alternative WWNN/WWPN prefix support. **/ -s32 ixgbe_get_wwn_prefix_generic(struct ixgbe_hw *hw, u16 *wwnn_prefix, - u16 *wwpn_prefix) +int ixgbe_get_wwn_prefix_generic(struct ixgbe_hw *hw, u16 *wwnn_prefix, + u16 *wwpn_prefix) { u16 offset, caps; u16 alt_san_mac_blk_offset; @@ -3507,7 +3494,7 @@ void ixgbe_set_vlan_anti_spoofing(struct ixgbe_hw *hw, bool enable, int vf) * This function will read the EEPROM location for the device capabilities, * and return the word through device_caps. **/ -s32 ixgbe_get_device_caps_generic(struct ixgbe_hw *hw, u16 *device_caps) +int ixgbe_get_device_caps_generic(struct ixgbe_hw *hw, u16 *device_caps) { hw->eeprom.ops.read(hw, IXGBE_DEVICE_CAPS, device_caps); @@ -3611,12 +3598,13 @@ u8 ixgbe_calculate_checksum(u8 *buffer, u32 length) * * Communicates with the manageability block. On success return 0 * else returns semaphore error when encountering an error acquiring - * semaphore or IXGBE_ERR_HOST_INTERFACE_COMMAND when command fails. + * semaphore, -EINVAL when incorrect parameters passed or -EIO when + * command fails. * * This function assumes that the IXGBE_GSSR_SW_MNG_SM semaphore is held * by the caller. **/ -s32 ixgbe_hic_unlocked(struct ixgbe_hw *hw, u32 *buffer, u32 length, +int ixgbe_hic_unlocked(struct ixgbe_hw *hw, u32 *buffer, u32 length, u32 timeout) { u32 hicr, i, fwsts; @@ -3624,7 +3612,7 @@ s32 ixgbe_hic_unlocked(struct ixgbe_hw *hw, u32 *buffer, u32 length, if (!length || length > IXGBE_HI_MAX_BLOCK_BYTE_LENGTH) { hw_dbg(hw, "Buffer length failure buffersize-%d.\n", length); - return IXGBE_ERR_HOST_INTERFACE_COMMAND; + return -EINVAL; } /* Set bit 9 of FWSTS clearing FW reset indication */ @@ -3635,13 +3623,13 @@ s32 ixgbe_hic_unlocked(struct ixgbe_hw *hw, u32 *buffer, u32 length, hicr = IXGBE_READ_REG(hw, IXGBE_HICR); if (!(hicr & IXGBE_HICR_EN)) { hw_dbg(hw, "IXGBE_HOST_EN bit disabled.\n"); - return IXGBE_ERR_HOST_INTERFACE_COMMAND; + return -EIO; } /* Calculate length in DWORDs. We must be DWORD aligned */ if (length % sizeof(u32)) { hw_dbg(hw, "Buffer length failure, not aligned to dword"); - return IXGBE_ERR_INVALID_ARGUMENT; + return -EINVAL; } dword_len = length >> 2; @@ -3666,7 +3654,7 @@ s32 ixgbe_hic_unlocked(struct ixgbe_hw *hw, u32 *buffer, u32 length, /* Check command successful completion. */ if ((timeout && i == timeout) || !(IXGBE_READ_REG(hw, IXGBE_HICR) & IXGBE_HICR_SV)) - return IXGBE_ERR_HOST_INTERFACE_COMMAND; + return -EIO; return 0; } @@ -3686,22 +3674,22 @@ s32 ixgbe_hic_unlocked(struct ixgbe_hw *hw, u32 *buffer, u32 length, * in these cases. * * Communicates with the manageability block. On success return 0 - * else return IXGBE_ERR_HOST_INTERFACE_COMMAND. + * else return -EIO or -EINVAL. **/ -s32 ixgbe_host_interface_command(struct ixgbe_hw *hw, void *buffer, +int ixgbe_host_interface_command(struct ixgbe_hw *hw, void *buffer, u32 length, u32 timeout, bool return_data) { u32 hdr_size = sizeof(struct ixgbe_hic_hdr); struct ixgbe_hic_hdr *hdr = buffer; - u32 *u32arr = buffer; u16 buf_len, dword_len; - s32 status; + u32 *u32arr = buffer; + int status; u32 bi; if (!length || length > IXGBE_HI_MAX_BLOCK_BYTE_LENGTH) { hw_dbg(hw, "Buffer length failure buffersize-%d.\n", length); - return IXGBE_ERR_HOST_INTERFACE_COMMAND; + return -EINVAL; } /* Take management host interface semaphore */ status = hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_SW_MNG_SM); @@ -3731,7 +3719,7 @@ s32 ixgbe_host_interface_command(struct ixgbe_hw *hw, void *buffer, if (length < round_up(buf_len, 4) + hdr_size) { hw_dbg(hw, "Buffer not large enough for reply message.\n"); - status = IXGBE_ERR_HOST_INTERFACE_COMMAND; + status = -EIO; goto rel_out; } @@ -3762,16 +3750,16 @@ rel_out: * * Sends driver version number to firmware through the manageability * block. On success return 0 - * else returns IXGBE_ERR_SWFW_SYNC when encountering an error acquiring - * semaphore or IXGBE_ERR_HOST_INTERFACE_COMMAND when command fails. + * else returns -EBUSY when encountering an error acquiring + * semaphore or -EIO when command fails. **/ -s32 ixgbe_set_fw_drv_ver_generic(struct ixgbe_hw *hw, u8 maj, u8 min, +int ixgbe_set_fw_drv_ver_generic(struct ixgbe_hw *hw, u8 maj, u8 min, u8 build, u8 sub, __always_unused u16 len, __always_unused const char *driver_ver) { struct ixgbe_hic_drv_info fw_cmd; + int ret_val; int i; - s32 ret_val; fw_cmd.hdr.cmd = FW_CEM_CMD_DRIVER_INFO; fw_cmd.hdr.buf_len = FW_CEM_CMD_DRIVER_INFO_LEN; @@ -3799,7 +3787,7 @@ s32 ixgbe_set_fw_drv_ver_generic(struct ixgbe_hw *hw, u8 maj, u8 min, FW_CEM_RESP_STATUS_SUCCESS) ret_val = 0; else - ret_val = IXGBE_ERR_HOST_INTERFACE_COMMAND; + ret_val = -EIO; break; } @@ -3887,24 +3875,24 @@ static const u8 ixgbe_emc_therm_limit[4] = { * * Returns error code. **/ -static s32 ixgbe_get_ets_data(struct ixgbe_hw *hw, u16 *ets_cfg, +static int ixgbe_get_ets_data(struct ixgbe_hw *hw, u16 *ets_cfg, u16 *ets_offset) { - s32 status; + int status; status = hw->eeprom.ops.read(hw, IXGBE_ETS_CFG, ets_offset); if (status) return status; if ((*ets_offset == 0x0000) || (*ets_offset == 0xFFFF)) - return IXGBE_NOT_IMPLEMENTED; + return -EOPNOTSUPP; status = hw->eeprom.ops.read(hw, *ets_offset, ets_cfg); if (status) return status; if ((*ets_cfg & IXGBE_ETS_TYPE_MASK) != IXGBE_ETS_TYPE_EMC_SHIFTED) - return IXGBE_NOT_IMPLEMENTED; + return -EOPNOTSUPP; return 0; } @@ -3915,19 +3903,19 @@ static s32 ixgbe_get_ets_data(struct ixgbe_hw *hw, u16 *ets_cfg, * * Returns the thermal sensor data structure **/ -s32 ixgbe_get_thermal_sensor_data_generic(struct ixgbe_hw *hw) +int ixgbe_get_thermal_sensor_data_generic(struct ixgbe_hw *hw) { - s32 status; u16 ets_offset; - u16 ets_cfg; u16 ets_sensor; u8 num_sensors; + u16 ets_cfg; + int status; u8 i; struct ixgbe_thermal_sensor_data *data = &hw->mac.thermal_sensor_data; /* Only support thermal sensors attached to physical port 0 */ if ((IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_LAN_ID_1)) - return IXGBE_NOT_IMPLEMENTED; + return -EOPNOTSUPP; status = ixgbe_get_ets_data(hw, &ets_cfg, &ets_offset); if (status) @@ -3946,10 +3934,10 @@ s32 ixgbe_get_thermal_sensor_data_generic(struct ixgbe_hw *hw) if (status) return status; - sensor_index = ((ets_sensor & IXGBE_ETS_DATA_INDEX_MASK) >> - IXGBE_ETS_DATA_INDEX_SHIFT); - sensor_location = ((ets_sensor & IXGBE_ETS_DATA_LOC_MASK) >> - IXGBE_ETS_DATA_LOC_SHIFT); + sensor_index = FIELD_GET(IXGBE_ETS_DATA_INDEX_MASK, + ets_sensor); + sensor_location = FIELD_GET(IXGBE_ETS_DATA_LOC_MASK, + ets_sensor); if (sensor_location != 0) { status = hw->phy.ops.read_i2c_byte(hw, @@ -3971,30 +3959,29 @@ s32 ixgbe_get_thermal_sensor_data_generic(struct ixgbe_hw *hw) * Inits the thermal sensor thresholds according to the NVM map * and save off the threshold and location values into mac.thermal_sensor_data **/ -s32 ixgbe_init_thermal_sensor_thresh_generic(struct ixgbe_hw *hw) +int ixgbe_init_thermal_sensor_thresh_generic(struct ixgbe_hw *hw) { - s32 status; - u16 ets_offset; - u16 ets_cfg; - u16 ets_sensor; + struct ixgbe_thermal_sensor_data *data = &hw->mac.thermal_sensor_data; u8 low_thresh_delta; u8 num_sensors; u8 therm_limit; + u16 ets_sensor; + u16 ets_offset; + u16 ets_cfg; + int status; u8 i; - struct ixgbe_thermal_sensor_data *data = &hw->mac.thermal_sensor_data; memset(data, 0, sizeof(struct ixgbe_thermal_sensor_data)); /* Only support thermal sensors attached to physical port 0 */ if ((IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_LAN_ID_1)) - return IXGBE_NOT_IMPLEMENTED; + return -EOPNOTSUPP; status = ixgbe_get_ets_data(hw, &ets_cfg, &ets_offset); if (status) return status; - low_thresh_delta = ((ets_cfg & IXGBE_ETS_LTHRES_DELTA_MASK) >> - IXGBE_ETS_LTHRES_DELTA_SHIFT); + low_thresh_delta = FIELD_GET(IXGBE_ETS_LTHRES_DELTA_MASK, ets_cfg); num_sensors = (ets_cfg & IXGBE_ETS_NUM_SENSORS_MASK); if (num_sensors > IXGBE_MAX_SENSORS) num_sensors = IXGBE_MAX_SENSORS; @@ -4008,10 +3995,10 @@ s32 ixgbe_init_thermal_sensor_thresh_generic(struct ixgbe_hw *hw) ets_offset + 1 + i); continue; } - sensor_index = ((ets_sensor & IXGBE_ETS_DATA_INDEX_MASK) >> - IXGBE_ETS_DATA_INDEX_SHIFT); - sensor_location = ((ets_sensor & IXGBE_ETS_DATA_LOC_MASK) >> - IXGBE_ETS_DATA_LOC_SHIFT); + sensor_index = FIELD_GET(IXGBE_ETS_DATA_INDEX_MASK, + ets_sensor); + sensor_location = FIELD_GET(IXGBE_ETS_DATA_LOC_MASK, + ets_sensor); therm_limit = ets_sensor & IXGBE_ETS_DATA_HTHRESH_MASK; hw->phy.ops.write_i2c_byte(hw, @@ -4205,16 +4192,16 @@ bool ixgbe_mng_present(struct ixgbe_hw *hw) * * Set the link speed in the MAC and/or PHY register and restarts link. */ -s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw, +int ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw, ixgbe_link_speed speed, bool autoneg_wait_to_complete) { - ixgbe_link_speed link_speed = IXGBE_LINK_SPEED_UNKNOWN; ixgbe_link_speed highest_link_speed = IXGBE_LINK_SPEED_UNKNOWN; - s32 status = 0; + ixgbe_link_speed link_speed = IXGBE_LINK_SPEED_UNKNOWN; + bool autoneg, link_up = false; u32 speedcnt = 0; + int status = 0; u32 i = 0; - bool autoneg, link_up = false; /* Mask off requested but non-supported speeds */ status = hw->mac.ops.get_link_capabilities(hw, &link_speed, &autoneg); @@ -4353,8 +4340,8 @@ out: void ixgbe_set_soft_rate_select_speed(struct ixgbe_hw *hw, ixgbe_link_speed speed) { - s32 status; u8 rs, eeprom_data; + int status; switch (speed) { case IXGBE_LINK_SPEED_10GB_FULL: |