diff options
Diffstat (limited to 'drivers/net/phy')
-rw-r--r-- | drivers/net/phy/at803x.c | 32 | ||||
-rw-r--r-- | drivers/net/phy/phy-c45.c | 40 | ||||
-rw-r--r-- | drivers/net/phy/phy.c | 2 | ||||
-rw-r--r-- | drivers/net/phy/phy_device.c | 12 | ||||
-rw-r--r-- | drivers/net/phy/phylink.c | 6 |
5 files changed, 63 insertions, 29 deletions
diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c index 222ccd9ecfce..6ad8b1c63c34 100644 --- a/drivers/net/phy/at803x.c +++ b/drivers/net/phy/at803x.c @@ -257,36 +257,20 @@ static int at803x_config_init(struct phy_device *phydev) * after HW reset: RX delay enabled and TX delay disabled * after SW reset: RX delay enabled, while TX delay retains the * value before reset. - * - * So let's first disable the RX and TX delays in PHY and enable - * them based on the mode selected (this also takes care of RGMII - * mode where we expect delays to be disabled) */ - - ret = at803x_disable_rx_delay(phydev); - if (ret < 0) - return ret; - ret = at803x_disable_tx_delay(phydev); - if (ret < 0) - return ret; - if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID || - phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID) { - /* If RGMII_ID or RGMII_RXID are specified enable RX delay, - * otherwise keep it disabled - */ + phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID) ret = at803x_enable_rx_delay(phydev); - if (ret < 0) - return ret; - } + else + ret = at803x_disable_rx_delay(phydev); + if (ret < 0) + return ret; if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID || - phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID) { - /* If RGMII_ID or RGMII_TXID are specified enable TX delay, - * otherwise keep it disabled - */ + phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID) ret = at803x_enable_tx_delay(phydev); - } + else + ret = at803x_disable_tx_delay(phydev); return ret; } diff --git a/drivers/net/phy/phy-c45.c b/drivers/net/phy/phy-c45.c index b9d4145781ca..7935593debb1 100644 --- a/drivers/net/phy/phy-c45.c +++ b/drivers/net/phy/phy-c45.c @@ -219,6 +219,20 @@ int genphy_c45_read_link(struct phy_device *phydev) int val, devad; bool link = true; + if (phydev->c45_ids.devices_in_package & MDIO_DEVS_AN) { + val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_CTRL1); + if (val < 0) + return val; + + /* Autoneg is being started, therefore disregard current + * link status and report link as down. + */ + if (val & MDIO_AN_CTRL1_RESTART) { + phydev->link = 0; + return 0; + } + } + while (mmd_mask && link) { devad = __ffs(mmd_mask); mmd_mask &= ~BIT(devad); @@ -509,6 +523,32 @@ int genphy_c45_read_status(struct phy_device *phydev) } EXPORT_SYMBOL_GPL(genphy_c45_read_status); +/** + * genphy_c45_config_aneg - restart auto-negotiation or forced setup + * @phydev: target phy_device struct + * + * Description: If auto-negotiation is enabled, we configure the + * advertising, and then restart auto-negotiation. If it is not + * enabled, then we force a configuration. + */ +int genphy_c45_config_aneg(struct phy_device *phydev) +{ + bool changed = false; + int ret; + + if (phydev->autoneg == AUTONEG_DISABLE) + return genphy_c45_pma_setup_forced(phydev); + + ret = genphy_c45_an_config_aneg(phydev); + if (ret < 0) + return ret; + if (ret > 0) + changed = true; + + return genphy_c45_check_and_restart_aneg(phydev, changed); +} +EXPORT_SYMBOL_GPL(genphy_c45_config_aneg); + /* The gen10g_* functions are the old Clause 45 stub */ int gen10g_config_aneg(struct phy_device *phydev) diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c index ef7aa738e0dc..6b0f89369b46 100644 --- a/drivers/net/phy/phy.c +++ b/drivers/net/phy/phy.c @@ -507,7 +507,7 @@ static int phy_config_aneg(struct phy_device *phydev) * allowed to call genphy_config_aneg() */ if (phydev->is_c45 && !(phydev->c45_ids.devices_in_package & BIT(0))) - return -EOPNOTSUPP; + return genphy_c45_config_aneg(phydev); return genphy_config_aneg(phydev); } diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c index 7ddd91df99e3..27ebc2c6c2d0 100644 --- a/drivers/net/phy/phy_device.c +++ b/drivers/net/phy/phy_device.c @@ -1752,7 +1752,17 @@ EXPORT_SYMBOL(genphy_aneg_done); */ int genphy_update_link(struct phy_device *phydev) { - int status; + int status = 0, bmcr; + + bmcr = phy_read(phydev, MII_BMCR); + if (bmcr < 0) + return bmcr; + + /* Autoneg is being started, therefore disregard BMSR value and + * report link as down. + */ + if (bmcr & BMCR_ANRESTART) + goto done; /* The link state is latched low so that momentary link * drops can be detected. Do not double-read the status diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c index a45c5de96ab1..a5a57ca94c1a 100644 --- a/drivers/net/phy/phylink.c +++ b/drivers/net/phy/phylink.c @@ -376,8 +376,8 @@ static void phylink_get_fixed_state(struct phylink *pl, struct phylink_link_stat * Local device Link partner * Pause AsymDir Pause AsymDir Result * 1 X 1 X TX+RX - * 0 1 1 1 RX - * 1 1 0 1 TX + * 0 1 1 1 TX + * 1 1 0 1 RX */ static void phylink_resolve_flow(struct phylink *pl, struct phylink_link_state *state) @@ -398,7 +398,7 @@ static void phylink_resolve_flow(struct phylink *pl, new_pause = MLO_PAUSE_TX | MLO_PAUSE_RX; else if (pause & MLO_PAUSE_ASYM) new_pause = state->pause & MLO_PAUSE_SYM ? - MLO_PAUSE_RX : MLO_PAUSE_TX; + MLO_PAUSE_TX : MLO_PAUSE_RX; } else { new_pause = pl->link_config.pause & MLO_PAUSE_TXRX_MASK; } |