diff options
Diffstat (limited to 'drivers/net/wireless/ath/ath11k/wmi.h')
| -rw-r--r-- | drivers/net/wireless/ath/ath11k/wmi.h | 214 |
1 files changed, 120 insertions, 94 deletions
diff --git a/drivers/net/wireless/ath/ath11k/wmi.h b/drivers/net/wireless/ath/ath11k/wmi.h index 100bb816b592..bb419e3abb00 100644 --- a/drivers/net/wireless/ath/ath11k/wmi.h +++ b/drivers/net/wireless/ath/ath11k/wmi.h @@ -1,7 +1,7 @@ /* SPDX-License-Identifier: BSD-3-Clause-Clear */ /* * Copyright (c) 2018-2019 The Linux Foundation. All rights reserved. - * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved. + * Copyright (c) 2021-2023 Qualcomm Innovation Center, Inc. All rights reserved. */ #ifndef ATH11K_WMI_H @@ -15,6 +15,7 @@ struct ath11k; struct ath11k_fw_stats; struct ath11k_fw_dbglog; struct ath11k_vif; +struct ath11k_reg_tpc_power_info; #define PSOC_HOST_MAX_NUM_SS (8) @@ -327,6 +328,22 @@ enum wmi_tlv_cmd_id { WMI_VDEV_SET_CUSTOM_AGGR_SIZE_CMDID, WMI_VDEV_ENCRYPT_DECRYPT_DATA_REQ_CMDID, WMI_VDEV_ADD_MAC_ADDR_TO_RX_FILTER_CMDID, + WMI_VDEV_SET_ARP_STAT_CMDID, + WMI_VDEV_GET_ARP_STAT_CMDID, + WMI_VDEV_GET_TX_POWER_CMDID, + WMI_VDEV_LIMIT_OFFCHAN_CMDID, + WMI_VDEV_SET_CUSTOM_SW_RETRY_TH_CMDID, + WMI_VDEV_CHAINMASK_CONFIG_CMDID, + WMI_VDEV_GET_BCN_RECEPTION_STATS_CMDID, + WMI_VDEV_GET_MWS_COEX_INFO_CMDID, + WMI_VDEV_DELETE_ALL_PEER_CMDID, + WMI_VDEV_BSS_MAX_IDLE_TIME_CMDID, + WMI_VDEV_AUDIO_SYNC_TRIGGER_CMDID, + WMI_VDEV_AUDIO_SYNC_QTIMER_CMDID, + WMI_VDEV_SET_PCL_CMDID, + WMI_VDEV_GET_BIG_DATA_CMDID, + WMI_VDEV_GET_BIG_DATA_P2_CMDID, + WMI_VDEV_SET_TPC_POWER_CMDID, WMI_PEER_CREATE_CMDID = WMI_TLV_CMD(WMI_GRP_PEER), WMI_PEER_DELETE_CMDID, WMI_PEER_FLUSH_TIDS_CMDID, @@ -1096,25 +1113,27 @@ enum wmi_tlv_vdev_param { }; enum wmi_tlv_peer_flags { - WMI_TLV_PEER_AUTH = 0x00000001, - WMI_TLV_PEER_QOS = 0x00000002, - WMI_TLV_PEER_NEED_PTK_4_WAY = 0x00000004, - WMI_TLV_PEER_NEED_GTK_2_WAY = 0x00000010, - WMI_TLV_PEER_APSD = 0x00000800, - WMI_TLV_PEER_HT = 0x00001000, - WMI_TLV_PEER_40MHZ = 0x00002000, - WMI_TLV_PEER_STBC = 0x00008000, - WMI_TLV_PEER_LDPC = 0x00010000, - WMI_TLV_PEER_DYN_MIMOPS = 0x00020000, - WMI_TLV_PEER_STATIC_MIMOPS = 0x00040000, - WMI_TLV_PEER_SPATIAL_MUX = 0x00200000, - WMI_TLV_PEER_VHT = 0x02000000, - WMI_TLV_PEER_80MHZ = 0x04000000, - WMI_TLV_PEER_PMF = 0x08000000, + WMI_PEER_AUTH = 0x00000001, + WMI_PEER_QOS = 0x00000002, + WMI_PEER_NEED_PTK_4_WAY = 0x00000004, + WMI_PEER_NEED_GTK_2_WAY = 0x00000010, + WMI_PEER_HE = 0x00000400, + WMI_PEER_APSD = 0x00000800, + WMI_PEER_HT = 0x00001000, + WMI_PEER_40MHZ = 0x00002000, + WMI_PEER_STBC = 0x00008000, + WMI_PEER_LDPC = 0x00010000, + WMI_PEER_DYN_MIMOPS = 0x00020000, + WMI_PEER_STATIC_MIMOPS = 0x00040000, + WMI_PEER_SPATIAL_MUX = 0x00200000, + WMI_PEER_TWT_REQ = 0x00400000, + WMI_PEER_TWT_RESP = 0x00800000, + WMI_PEER_VHT = 0x02000000, + WMI_PEER_80MHZ = 0x04000000, + WMI_PEER_PMF = 0x08000000, WMI_PEER_IS_P2P_CAPABLE = 0x20000000, WMI_PEER_160MHZ = 0x40000000, WMI_PEER_SAFEMODE_EN = 0x80000000, - }; /** Enum list of TLV Tags for each parameter structure type. */ @@ -1878,6 +1897,8 @@ enum wmi_tlv_tag { WMI_TAG_PDEV_NON_SRG_OBSS_BSSID_ENABLE_BITMAP_CMD, WMI_TAG_REGULATORY_RULE_EXT_STRUCT = 0x3A9, WMI_TAG_REG_CHAN_LIST_CC_EXT_EVENT, + WMI_TAG_VDEV_SET_TPC_POWER_CMD = 0x3B5, + WMI_TAG_VDEV_CH_POWER_INFO, WMI_TAG_PDEV_SET_BIOS_SAR_TABLE_CMD = 0x3D8, WMI_TAG_PDEV_SET_BIOS_GEO_TABLE_CMD, WMI_TAG_MAX @@ -2112,6 +2133,7 @@ enum wmi_tlv_service { /* The second 128 bits */ WMI_MAX_EXT_SERVICE = 256, WMI_TLV_SERVICE_SCAN_CONFIG_PER_CHANNEL = 265, + WMI_TLV_SERVICE_EXT_TPC_REG_SUPPORT = 280, WMI_TLV_SERVICE_REG_CC_EXT_EVENT_SUPPORT = 281, WMI_TLV_SERVICE_BIOS_SAR_SUPPORT = 326, WMI_TLV_SERVICE_SUPPORT_11D_FOR_HOST_SCAN = 357, @@ -2580,7 +2602,6 @@ struct wmi_service_available_event { struct ath11k_pdev_wmi { struct ath11k_wmi_base *wmi_ab; enum ath11k_htc_ep_id eid; - const struct wmi_peer_flags_map *peer_flags; u32 rx_decap_mode; wait_queue_head_t tx_ce_desc_wq; }; @@ -3167,6 +3188,41 @@ struct wlan_ssid { u8 ssid[WLAN_SSID_MAX_LEN]; }; +struct wmi_vdev_ch_power_info { + u32 tlv_header; + + /* Channel center frequency (MHz) */ + u32 chan_cfreq; + + /* Unit: dBm, either PSD/EIRP power for this frequency or + * incremental for non-PSD BW + */ + u32 tx_power; +} __packed; + +struct wmi_vdev_set_tpc_power_cmd { + u32 tlv_header; + u32 vdev_id; + + /* Value: 0 or 1, is PSD power or not */ + u32 psd_power; + + /* Maximum EIRP power (dBm units), valid only if power is PSD */ + u32 eirp_power; + + /* Type: WMI_6GHZ_REG_TYPE, used for halphy CTL lookup */ + u32 power_type_6ghz; + + /* This fixed_param TLV is followed by the below TLVs: + * num_pwr_levels of wmi_vdev_ch_power_info + * For PSD power, it is the PSD/EIRP power of the frequency (20 MHz chunks). + * For non-PSD power, the power values are for 20, 40, and till + * BSS BW power levels. + * The num_pwr_levels will be checked by sw how many elements present + * in the variable-length array. + */ +} __packed; + #define WMI_IE_BITMAP_SIZE 8 /* prefix used by scan requestor ids on the host */ @@ -3307,24 +3363,19 @@ struct scan_req_params { u32 vdev_id; u32 pdev_id; enum wmi_scan_priority scan_priority; - union { - struct { - u32 scan_ev_started:1, - scan_ev_completed:1, - scan_ev_bss_chan:1, - scan_ev_foreign_chan:1, - scan_ev_dequeued:1, - scan_ev_preempted:1, - scan_ev_start_failed:1, - scan_ev_restarted:1, - scan_ev_foreign_chn_exit:1, - scan_ev_invalid:1, - scan_ev_gpio_timeout:1, - scan_ev_suspended:1, - scan_ev_resumed:1; - }; - u32 scan_events; - }; + u32 scan_ev_started:1, + scan_ev_completed:1, + scan_ev_bss_chan:1, + scan_ev_foreign_chan:1, + scan_ev_dequeued:1, + scan_ev_preempted:1, + scan_ev_start_failed:1, + scan_ev_restarted:1, + scan_ev_foreign_chn_exit:1, + scan_ev_invalid:1, + scan_ev_gpio_timeout:1, + scan_ev_suspended:1, + scan_ev_resumed:1; u32 scan_ctrl_flags_ext; u32 dwell_time_active; u32 dwell_time_active_2g; @@ -3338,36 +3389,31 @@ struct scan_req_params { u32 idle_time; u32 max_scan_time; u32 probe_delay; - union { - struct { - u32 scan_f_passive:1, - scan_f_bcast_probe:1, - scan_f_cck_rates:1, - scan_f_ofdm_rates:1, - scan_f_chan_stat_evnt:1, - scan_f_filter_prb_req:1, - scan_f_bypass_dfs_chn:1, - scan_f_continue_on_err:1, - scan_f_offchan_mgmt_tx:1, - scan_f_offchan_data_tx:1, - scan_f_promisc_mode:1, - scan_f_capture_phy_err:1, - scan_f_strict_passive_pch:1, - scan_f_half_rate:1, - scan_f_quarter_rate:1, - scan_f_force_active_dfs_chn:1, - scan_f_add_tpc_ie_in_probe:1, - scan_f_add_ds_ie_in_probe:1, - scan_f_add_spoofed_mac_in_probe:1, - scan_f_add_rand_seq_in_probe:1, - scan_f_en_ie_whitelist_in_probe:1, - scan_f_forced:1, - scan_f_2ghz:1, - scan_f_5ghz:1, - scan_f_80mhz:1; - }; - u32 scan_flags; - }; + u32 scan_f_passive:1, + scan_f_bcast_probe:1, + scan_f_cck_rates:1, + scan_f_ofdm_rates:1, + scan_f_chan_stat_evnt:1, + scan_f_filter_prb_req:1, + scan_f_bypass_dfs_chn:1, + scan_f_continue_on_err:1, + scan_f_offchan_mgmt_tx:1, + scan_f_offchan_data_tx:1, + scan_f_promisc_mode:1, + scan_f_capture_phy_err:1, + scan_f_strict_passive_pch:1, + scan_f_half_rate:1, + scan_f_quarter_rate:1, + scan_f_force_active_dfs_chn:1, + scan_f_add_tpc_ie_in_probe:1, + scan_f_add_ds_ie_in_probe:1, + scan_f_add_spoofed_mac_in_probe:1, + scan_f_add_rand_seq_in_probe:1, + scan_f_en_ie_whitelist_in_probe:1, + scan_f_forced:1, + scan_f_2ghz:1, + scan_f_5ghz:1, + scan_f_80mhz:1; enum scan_dwelltime_adaptive_mode adaptive_dwell_time_mode; u32 burst_duration; u32 num_chan; @@ -4062,31 +4108,6 @@ struct wmi_unit_test_cmd { #define MAX_SUPPORTED_RATES 128 -#define WMI_PEER_AUTH 0x00000001 -#define WMI_PEER_QOS 0x00000002 -#define WMI_PEER_NEED_PTK_4_WAY 0x00000004 -#define WMI_PEER_NEED_GTK_2_WAY 0x00000010 -#define WMI_PEER_HE 0x00000400 -#define WMI_PEER_APSD 0x00000800 -#define WMI_PEER_HT 0x00001000 -#define WMI_PEER_40MHZ 0x00002000 -#define WMI_PEER_STBC 0x00008000 -#define WMI_PEER_LDPC 0x00010000 -#define WMI_PEER_DYN_MIMOPS 0x00020000 -#define WMI_PEER_STATIC_MIMOPS 0x00040000 -#define WMI_PEER_SPATIAL_MUX 0x00200000 -#define WMI_PEER_TWT_REQ 0x00400000 -#define WMI_PEER_TWT_RESP 0x00800000 -#define WMI_PEER_VHT 0x02000000 -#define WMI_PEER_80MHZ 0x04000000 -#define WMI_PEER_PMF 0x08000000 -/* TODO: Place holder for WLAN_PEER_F_PS_PRESEND_REQUIRED = 0x10000000. - * Need to be cleaned up - */ -#define WMI_PEER_IS_P2P_CAPABLE 0x20000000 -#define WMI_PEER_160MHZ 0x40000000 -#define WMI_PEER_SAFEMODE_EN 0x80000000 - struct beacon_tmpl_params { u8 vdev_id; u32 tim_ie_offset; @@ -4143,6 +4164,7 @@ struct wmi_vdev_start_resp_event { }; u32 cfgd_tx_streams; u32 cfgd_rx_streams; + s32 max_allowed_tx_power; } __packed; /* VDEV start response status codes */ @@ -4975,6 +4997,7 @@ struct ath11k_targ_cap { }; enum wmi_vdev_type { + WMI_VDEV_TYPE_UNSPEC = 0, WMI_VDEV_TYPE_AP = 1, WMI_VDEV_TYPE_STA = 2, WMI_VDEV_TYPE_IBSS = 3, @@ -5754,7 +5777,6 @@ struct ath11k_wmi_base { struct completion unified_ready; DECLARE_BITMAP(svc_map, WMI_MAX_EXT2_SERVICE); wait_queue_head_t tx_credits_wq; - const struct wmi_peer_flags_map *peer_flags; u32 num_mem_chunks; u32 rx_decap_mode; struct wmi_host_mem_chunk mem_chunks[WMI_MAX_MEM_REQS]; @@ -6320,8 +6342,8 @@ enum wmi_sta_keepalive_method { #define WMI_STA_KEEPALIVE_INTERVAL_DEFAULT 30 #define WMI_STA_KEEPALIVE_INTERVAL_DISABLE 0 -const void **ath11k_wmi_tlv_parse_alloc(struct ath11k_base *ab, const void *ptr, - size_t len, gfp_t gfp); +const void **ath11k_wmi_tlv_parse_alloc(struct ath11k_base *ab, + struct sk_buff *skb, gfp_t gfp); int ath11k_wmi_cmd_send(struct ath11k_pdev_wmi *wmi, struct sk_buff *skb, u32 cmd_id); struct sk_buff *ath11k_wmi_alloc_skb(struct ath11k_wmi_base *wmi_sc, u32 len); @@ -6504,5 +6526,9 @@ int ath11k_wmi_pdev_set_bios_sar_table_param(struct ath11k *ar, const u8 *sar_va int ath11k_wmi_pdev_set_bios_geo_table_param(struct ath11k *ar); int ath11k_wmi_sta_keepalive(struct ath11k *ar, const struct wmi_sta_keepalive_arg *arg); +bool ath11k_wmi_supports_6ghz_cc_ext(struct ath11k *ar); +int ath11k_wmi_send_vdev_set_tpc_power(struct ath11k *ar, + u32 vdev_id, + struct ath11k_reg_tpc_power_info *param); #endif |