diff options
Diffstat (limited to 'drivers/thermal')
| -rw-r--r-- | drivers/thermal/Makefile | 4 | ||||
| -rw-r--r-- | drivers/thermal/thermal_core.c | 87 | ||||
| -rw-r--r-- | drivers/thermal/thermal_core.h | 4 | ||||
| -rw-r--r-- | drivers/thermal/thermal_helpers.c | 62 | ||||
| -rw-r--r-- | drivers/thermal/thermal_trip.c | 182 |
5 files changed, 188 insertions, 151 deletions
diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile index 2506c6c8ca83..8b8d8517697a 100644 --- a/drivers/thermal/Makefile +++ b/drivers/thermal/Makefile @@ -4,8 +4,8 @@ # obj-$(CONFIG_THERMAL) += thermal_sys.o -thermal_sys-y += thermal_core.o thermal_sysfs.o \ - thermal_helpers.o +thermal_sys-y += thermal_core.o thermal_sysfs.o +thermal_sys-y += thermal_trip.o thermal_helpers.o # netlink interface to manage the thermal framework thermal_sys-$(CONFIG_THERMAL_NETLINK) += thermal_netlink.o diff --git a/drivers/thermal/thermal_core.c b/drivers/thermal/thermal_core.c index 99869e9dd68e..2f6ecb7be8de 100644 --- a/drivers/thermal/thermal_core.c +++ b/drivers/thermal/thermal_core.c @@ -1156,12 +1156,6 @@ static void thermal_set_delay_jiffies(unsigned long *delay_jiffies, int delay_ms *delay_jiffies = round_jiffies(*delay_jiffies); } -int thermal_zone_get_num_trips(struct thermal_zone_device *tz) -{ - return tz->num_trips; -} -EXPORT_SYMBOL_GPL(thermal_zone_get_num_trips); - int thermal_zone_get_crit_temp(struct thermal_zone_device *tz, int *temp) { int i, ret = -EINVAL; @@ -1188,87 +1182,6 @@ int thermal_zone_get_crit_temp(struct thermal_zone_device *tz, int *temp) } EXPORT_SYMBOL_GPL(thermal_zone_get_crit_temp); -int __thermal_zone_get_trip(struct thermal_zone_device *tz, int trip_id, - struct thermal_trip *trip) -{ - int ret; - - if (!tz || trip_id < 0 || trip_id >= tz->num_trips || !trip) - return -EINVAL; - - if (tz->trips) { - *trip = tz->trips[trip_id]; - return 0; - } - - if (tz->ops->get_trip_hyst) { - ret = tz->ops->get_trip_hyst(tz, trip_id, &trip->hysteresis); - if (ret) - return ret; - } else { - trip->hysteresis = 0; - } - - ret = tz->ops->get_trip_temp(tz, trip_id, &trip->temperature); - if (ret) - return ret; - - return tz->ops->get_trip_type(tz, trip_id, &trip->type); -} -EXPORT_SYMBOL_GPL(__thermal_zone_get_trip); - -int thermal_zone_get_trip(struct thermal_zone_device *tz, int trip_id, - struct thermal_trip *trip) -{ - int ret; - - mutex_lock(&tz->lock); - ret = __thermal_zone_get_trip(tz, trip_id, trip); - mutex_unlock(&tz->lock); - - return ret; -} -EXPORT_SYMBOL_GPL(thermal_zone_get_trip); - -int thermal_zone_set_trip(struct thermal_zone_device *tz, int trip_id, - const struct thermal_trip *trip) -{ - struct thermal_trip t; - int ret; - - if (!tz->ops->set_trip_temp && !tz->ops->set_trip_hyst && !tz->trips) - return -EINVAL; - - ret = __thermal_zone_get_trip(tz, trip_id, &t); - if (ret) - return ret; - - if (t.type != trip->type) - return -EINVAL; - - if (t.temperature != trip->temperature && tz->ops->set_trip_temp) { - ret = tz->ops->set_trip_temp(tz, trip_id, trip->temperature); - if (ret) - return ret; - } - - if (t.hysteresis != trip->hysteresis && tz->ops->set_trip_hyst) { - ret = tz->ops->set_trip_hyst(tz, trip_id, trip->hysteresis); - if (ret) - return ret; - } - - if (tz->trips && (t.temperature != trip->temperature || t.hysteresis != trip->hysteresis)) - tz->trips[trip_id] = *trip; - - thermal_notify_tz_trip_change(tz->id, trip_id, trip->type, - trip->temperature, trip->hysteresis); - - __thermal_zone_device_update(tz, THERMAL_TRIP_CHANGED); - - return 0; -} - /** * thermal_zone_device_register_with_trips() - register a new thermal zone device * @type: the thermal zone device type diff --git a/drivers/thermal/thermal_core.h b/drivers/thermal/thermal_core.h index 26350206a98d..7af54382e915 100644 --- a/drivers/thermal/thermal_core.h +++ b/drivers/thermal/thermal_core.h @@ -52,6 +52,10 @@ int for_each_thermal_cooling_device(int (*cb)(struct thermal_cooling_device *, int for_each_thermal_governor(int (*cb)(struct thermal_governor *, void *), void *thermal_governor); +int __for_each_thermal_trip(struct thermal_zone_device *, + int (*cb)(struct thermal_trip *, void *), + void *); + struct thermal_zone_device *thermal_zone_get_by_id(int id); struct thermal_attr { diff --git a/drivers/thermal/thermal_helpers.c b/drivers/thermal/thermal_helpers.c index 8977d5ddc23c..0f648131b0b5 100644 --- a/drivers/thermal/thermal_helpers.c +++ b/drivers/thermal/thermal_helpers.c @@ -146,68 +146,6 @@ unlock: } EXPORT_SYMBOL_GPL(thermal_zone_get_temp); -/** - * __thermal_zone_set_trips - Computes the next trip points for the driver - * @tz: a pointer to a thermal zone device structure - * - * The function computes the next temperature boundaries by browsing - * the trip points. The result is the closer low and high trip points - * to the current temperature. These values are passed to the backend - * driver to let it set its own notification mechanism (usually an - * interrupt). - * - * This function must be called with tz->lock held. Both tz and tz->ops - * must be valid pointers. - * - * It does not return a value - */ -void __thermal_zone_set_trips(struct thermal_zone_device *tz) -{ - struct thermal_trip trip; - int low = -INT_MAX, high = INT_MAX; - int i, ret; - - lockdep_assert_held(&tz->lock); - - if (!tz->ops->set_trips) - return; - - for (i = 0; i < tz->num_trips; i++) { - int trip_low; - - ret = __thermal_zone_get_trip(tz, i , &trip); - if (ret) - return; - - trip_low = trip.temperature - trip.hysteresis; - - if (trip_low < tz->temperature && trip_low > low) - low = trip_low; - - if (trip.temperature > tz->temperature && - trip.temperature < high) - high = trip.temperature; - } - - /* No need to change trip points */ - if (tz->prev_low_trip == low && tz->prev_high_trip == high) - return; - - tz->prev_low_trip = low; - tz->prev_high_trip = high; - - dev_dbg(&tz->device, - "new temperature boundaries: %d < x < %d\n", low, high); - - /* - * Set a temperature window. When this window is left the driver - * must inform the thermal core via thermal_zone_device_update. - */ - ret = tz->ops->set_trips(tz, low, high); - if (ret) - dev_err(&tz->device, "Failed to set trips: %d\n", ret); -} - static void thermal_cdev_set_cur_state(struct thermal_cooling_device *cdev, int target) { diff --git a/drivers/thermal/thermal_trip.c b/drivers/thermal/thermal_trip.c new file mode 100644 index 000000000000..907f3a4d7bc8 --- /dev/null +++ b/drivers/thermal/thermal_trip.c @@ -0,0 +1,182 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2008 Intel Corp + * Copyright (C) 2008 Zhang Rui <rui.zhang@intel.com> + * Copyright (C) 2008 Sujith Thomas <sujith.thomas@intel.com> + * Copyright 2022 Linaro Limited + * + * Thermal trips handling + */ +#include "thermal_core.h" + +int __for_each_thermal_trip(struct thermal_zone_device *tz, + int (*cb)(struct thermal_trip *, void *), + void *data) +{ + int i, ret; + struct thermal_trip trip; + + lockdep_assert_held(&tz->lock); + + for (i = 0; i < tz->num_trips; i++) { + + ret = __thermal_zone_get_trip(tz, i, &trip); + if (ret) + return ret; + + ret = cb(&trip, data); + if (ret) + return ret; + } + + return 0; +} + +int thermal_zone_get_num_trips(struct thermal_zone_device *tz) +{ + return tz->num_trips; +} +EXPORT_SYMBOL_GPL(thermal_zone_get_num_trips); + +/** + * __thermal_zone_set_trips - Computes the next trip points for the driver + * @tz: a pointer to a thermal zone device structure + * + * The function computes the next temperature boundaries by browsing + * the trip points. The result is the closer low and high trip points + * to the current temperature. These values are passed to the backend + * driver to let it set its own notification mechanism (usually an + * interrupt). + * + * This function must be called with tz->lock held. Both tz and tz->ops + * must be valid pointers. + * + * It does not return a value + */ +void __thermal_zone_set_trips(struct thermal_zone_device *tz) +{ + struct thermal_trip trip; + int low = -INT_MAX, high = INT_MAX; + int i, ret; + + lockdep_assert_held(&tz->lock); + + if (!tz->ops->set_trips) + return; + + for (i = 0; i < tz->num_trips; i++) { + int trip_low; + + ret = __thermal_zone_get_trip(tz, i , &trip); + if (ret) + return; + + trip_low = trip.temperature - trip.hysteresis; + + if (trip_low < tz->temperature && trip_low > low) + low = trip_low; + + if (trip.temperature > tz->temperature && + trip.temperature < high) + high = trip.temperature; + } + + /* No need to change trip points */ + if (tz->prev_low_trip == low && tz->prev_high_trip == high) + return; + + tz->prev_low_trip = low; + tz->prev_high_trip = high; + + dev_dbg(&tz->device, + "new temperature boundaries: %d < x < %d\n", low, high); + + /* + * Set a temperature window. When this window is left the driver + * must inform the thermal core via thermal_zone_device_update. + */ + ret = tz->ops->set_trips(tz, low, high); + if (ret) + dev_err(&tz->device, "Failed to set trips: %d\n", ret); +} + +int __thermal_zone_get_trip(struct thermal_zone_device *tz, int trip_id, + struct thermal_trip *trip) +{ + int ret; + + if (!tz || trip_id < 0 || trip_id >= tz->num_trips || !trip) + return -EINVAL; + + if (tz->trips) { + *trip = tz->trips[trip_id]; + return 0; + } + + if (tz->ops->get_trip_hyst) { + ret = tz->ops->get_trip_hyst(tz, trip_id, &trip->hysteresis); + if (ret) + return ret; + } else { + trip->hysteresis = 0; + } + + ret = tz->ops->get_trip_temp(tz, trip_id, &trip->temperature); + if (ret) + return ret; + + return tz->ops->get_trip_type(tz, trip_id, &trip->type); +} +EXPORT_SYMBOL_GPL(__thermal_zone_get_trip); + +int thermal_zone_get_trip(struct thermal_zone_device *tz, int trip_id, + struct thermal_trip *trip) +{ + int ret; + + mutex_lock(&tz->lock); + ret = __thermal_zone_get_trip(tz, trip_id, trip); + mutex_unlock(&tz->lock); + + return ret; +} +EXPORT_SYMBOL_GPL(thermal_zone_get_trip); + +int thermal_zone_set_trip(struct thermal_zone_device *tz, int trip_id, + const struct thermal_trip *trip) +{ + struct thermal_trip t; + int ret; + + if (!tz->ops->set_trip_temp && !tz->ops->set_trip_hyst && !tz->trips) + return -EINVAL; + + ret = __thermal_zone_get_trip(tz, trip_id, &t); + if (ret) + return ret; + + if (t.type != trip->type) + return -EINVAL; + + if (t.temperature != trip->temperature && tz->ops->set_trip_temp) { + ret = tz->ops->set_trip_temp(tz, trip_id, trip->temperature); + if (ret) + return ret; + } + + if (t.hysteresis != trip->hysteresis && tz->ops->set_trip_hyst) { + ret = tz->ops->set_trip_hyst(tz, trip_id, trip->hysteresis); + if (ret) + return ret; + } + + if (tz->trips && (t.temperature != trip->temperature || t.hysteresis != trip->hysteresis)) + tz->trips[trip_id] = *trip; + + thermal_notify_tz_trip_change(tz->id, trip_id, trip->type, + trip->temperature, trip->hysteresis); + + __thermal_zone_device_update(tz, THERMAL_TRIP_CHANGED); + + return 0; +} |