diff options
Diffstat (limited to 'include/linux/firmware/intel')
| -rw-r--r-- | include/linux/firmware/intel/stratix10-smc.h | 49 | ||||
| -rw-r--r-- | include/linux/firmware/intel/stratix10-svc-client.h | 71 |
2 files changed, 51 insertions, 69 deletions
diff --git a/include/linux/firmware/intel/stratix10-smc.h b/include/linux/firmware/intel/stratix10-smc.h index 013ae4819deb..682dbf694007 100644 --- a/include/linux/firmware/intel/stratix10-smc.h +++ b/include/linux/firmware/intel/stratix10-smc.h @@ -54,32 +54,25 @@ * Secure monitor software doesn't recognize the request. * * INTEL_SIP_SMC_STATUS_OK: - * FPGA configuration completed successfully, - * In case of FPGA configuration write operation, it means secure monitor - * software can accept the next chunk of FPGA configuration data. + * Secure monitor software accepts the service client's request. * - * INTEL_SIP_SMC_FPGA_CONFIG_STATUS_BUSY: - * In case of FPGA configuration write operation, it means secure monitor - * software is still processing previous data & can't accept the next chunk - * of data. Service driver needs to issue - * INTEL_SIP_SMC_FPGA_CONFIG_COMPLETED_WRITE call to query the - * completed block(s). + * INTEL_SIP_SMC_STATUS_BUSY: + * Secure monitor software is still processing service client's request. * - * INTEL_SIP_SMC_FPGA_CONFIG_STATUS_ERROR: - * There is error during the FPGA configuration process. + * INTEL_SIP_SMC_STATUS_REJECTED: + * Secure monitor software reject the service client's request. * - * INTEL_SIP_SMC_REG_ERROR: - * There is error during a read or write operation of the protected registers. + * INTEL_SIP_SMC_STATUS_ERROR: + * There is error during the process of service request. * * INTEL_SIP_SMC_RSU_ERROR: - * There is error during a remote status update. + * There is error during the process of remote status update request. */ #define INTEL_SIP_SMC_RETURN_UNKNOWN_FUNCTION 0xFFFFFFFF #define INTEL_SIP_SMC_STATUS_OK 0x0 -#define INTEL_SIP_SMC_FPGA_CONFIG_STATUS_BUSY 0x1 -#define INTEL_SIP_SMC_FPGA_CONFIG_STATUS_REJECTED 0x2 -#define INTEL_SIP_SMC_FPGA_CONFIG_STATUS_ERROR 0x4 -#define INTEL_SIP_SMC_REG_ERROR 0x5 +#define INTEL_SIP_SMC_STATUS_BUSY 0x1 +#define INTEL_SIP_SMC_STATUS_REJECTED 0x2 +#define INTEL_SIP_SMC_STATUS_ERROR 0x4 #define INTEL_SIP_SMC_RSU_ERROR 0x7 /** @@ -95,7 +88,7 @@ * a2-7: not used. * * Return status: - * a0: INTEL_SIP_SMC_STATUS_OK, or INTEL_SIP_SMC_FPGA_CONFIG_STATUS_ERROR. + * a0: INTEL_SIP_SMC_STATUS_OK, or INTEL_SIP_SMC_STATUS_ERROR. * a1-3: not used. */ #define INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_START 1 @@ -115,8 +108,8 @@ * a3-7: not used. * * Return status: - * a0: INTEL_SIP_SMC_STATUS_OK, INTEL_SIP_SMC_FPGA_CONFIG_STATUS_BUSY or - * INTEL_SIP_SMC_FPGA_CONFIG_STATUS_ERROR. + * a0: INTEL_SIP_SMC_STATUS_OK, INTEL_SIP_SMC_STATUS_BUSY or + * INTEL_SIP_SMC_STATUS_ERROR. * a1: 64bit physical address of 1st completed memory block if any completed * block, otherwise zero value. * a2: 64bit physical address of 2nd completed memory block if any completed @@ -133,15 +126,15 @@ * * Sync call used by service driver at EL1 to track the completed write * transactions. This request is called after INTEL_SIP_SMC_FPGA_CONFIG_WRITE - * call returns INTEL_SIP_SMC_FPGA_CONFIG_STATUS_BUSY. + * call returns INTEL_SIP_SMC_STATUS_BUSY. * * Call register usage: * a0: INTEL_SIP_SMC_FPGA_CONFIG_COMPLETED_WRITE. * a1-7: not used. * * Return status: - * a0: INTEL_SIP_SMC_STATUS_OK, INTEL_SIP_SMC_FPGA_CONFIG_STATUS_BUSY or - * INTEL_SIP_SMC_FPGA_CONFIG_STATUS_ERROR. + * a0: INTEL_SIP_SMC_STATUS_OK, INTEL_SIP_SMC_FPGA_BUSY or + * INTEL_SIP_SMC_STATUS_ERROR. * a1: 64bit physical address of 1st completed memory block. * a2: 64bit physical address of 2nd completed memory block if * any completed block, otherwise zero value. @@ -164,8 +157,8 @@ INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_COMPLETED_WRITE) * a1-7: not used. * * Return status: - * a0: INTEL_SIP_SMC_STATUS_OK, INTEL_SIP_SMC_FPGA_CONFIG_STATUS_BUSY or - * INTEL_SIP_SMC_FPGA_CONFIG_STATUS_ERROR. + * a0: INTEL_SIP_SMC_STATUS_OK, INTEL_SIP_SMC_STATUS_BUSY or + * INTEL_SIP_SMC_STATUS_ERROR. * a1-3: not used. */ #define INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_ISDONE 4 @@ -183,7 +176,7 @@ INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_COMPLETED_WRITE) * a1-7: not used. * * Return status: - * a0: INTEL_SIP_SMC_STATUS_OK or INTEL_SIP_SMC_FPGA_CONFIG_STATUS_ERROR. + * a0: INTEL_SIP_SMC_STATUS_OK or INTEL_SIP_SMC_STATUS_ERROR. * a1: start of physical address of reserved memory block. * a2: size of reserved memory block. * a3: not used. @@ -203,7 +196,7 @@ INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_COMPLETED_WRITE) * a1-7: not used. * * Return status: - * a0: INTEL_SIP_SMC_STATUS_OK or INTEL_SIP_SMC_FPGA_CONFIG_STATUS_ERROR. + * a0: INTEL_SIP_SMC_STATUS_OK or INTEL_SIP_SMC_STATUS_ERROR. * a1-3: not used. */ #define INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_LOOPBACK 6 diff --git a/include/linux/firmware/intel/stratix10-svc-client.h b/include/linux/firmware/intel/stratix10-svc-client.h index 59bc6e2af693..64213c3e82f5 100644 --- a/include/linux/firmware/intel/stratix10-svc-client.h +++ b/include/linux/firmware/intel/stratix10-svc-client.h @@ -18,45 +18,37 @@ /** * Status of the sent command, in bit number * - * SVC_COMMAND_STATUS_RECONFIG_REQUEST_OK: - * Secure firmware accepts the request of FPGA reconfiguration. + * SVC_STATUS_OK: + * Secure firmware accepts the request issued by one of service clients. * - * SVC_STATUS_RECONFIG_BUFFER_SUBMITTED: - * Service client successfully submits FPGA configuration - * data buffer to secure firmware. + * SVC_STATUS_BUFFER_SUBMITTED: + * Service client successfully submits data buffer to secure firmware. * - * SVC_COMMAND_STATUS_RECONFIG_BUFFER_DONE: + * SVC_STATUS_BUFFER_DONE: * Secure firmware completes data process, ready to accept the * next WRITE transaction. * - * SVC_COMMAND_STATUS_RECONFIG_COMPLETED: - * Secure firmware completes FPGA configuration successfully, FPGA should - * be in user mode. + * SVC_STATUS_COMPLETED: + * Secure firmware completes service request successfully. In case of + * FPGA configuration, FPGA should be in user mode. * - * SVC_COMMAND_STATUS_RECONFIG_BUSY: - * FPGA configuration is still in process. + * SVC_COMMAND_STATUS_BUSY: + * Service request is still in process. * - * SVC_COMMAND_STATUS_RECONFIG_ERROR: - * Error encountered during FPGA configuration. + * SVC_COMMAND_STATUS_ERROR: + * Error encountered during the process of the service request. * - * SVC_STATUS_RSU_OK: - * Secure firmware accepts the request of remote status update (RSU). - * - * SVC_STATUS_RSU_ERROR: - * Error encountered during remote system update. - * - * SVC_STATUS_RSU_NO_SUPPORT: - * Secure firmware doesn't support RSU retry or notify feature. + * SVC_STATUS_NO_SUPPORT: + * Secure firmware doesn't support requested features such as RSU retry + * or RSU notify. */ -#define SVC_STATUS_RECONFIG_REQUEST_OK 0 -#define SVC_STATUS_RECONFIG_BUFFER_SUBMITTED 1 -#define SVC_STATUS_RECONFIG_BUFFER_DONE 2 -#define SVC_STATUS_RECONFIG_COMPLETED 3 -#define SVC_STATUS_RECONFIG_BUSY 4 -#define SVC_STATUS_RECONFIG_ERROR 5 -#define SVC_STATUS_RSU_OK 6 -#define SVC_STATUS_RSU_ERROR 7 -#define SVC_STATUS_RSU_NO_SUPPORT 8 +#define SVC_STATUS_OK 0 +#define SVC_STATUS_BUFFER_SUBMITTED 1 +#define SVC_STATUS_BUFFER_DONE 2 +#define SVC_STATUS_COMPLETED 3 +#define SVC_STATUS_BUSY 4 +#define SVC_STATUS_ERROR 5 +#define SVC_STATUS_NO_SUPPORT 6 /** * Flag bit for COMMAND_RECONFIG @@ -84,32 +76,29 @@ struct stratix10_svc_chan; * @COMMAND_NOOP: do 'dummy' request for integration/debug/trouble-shooting * * @COMMAND_RECONFIG: ask for FPGA configuration preparation, return status - * is SVC_STATUS_RECONFIG_REQUEST_OK + * is SVC_STATUS_OK * * @COMMAND_RECONFIG_DATA_SUBMIT: submit buffer(s) of bit-stream data for the - * FPGA configuration, return status is SVC_STATUS_RECONFIG_BUFFER_SUBMITTED, - * or SVC_STATUS_RECONFIG_ERROR + * FPGA configuration, return status is SVC_STATUS_SUBMITTED or SVC_STATUS_ERROR * * @COMMAND_RECONFIG_DATA_CLAIM: check the status of the configuration, return - * status is SVC_STATUS_RECONFIG_COMPLETED, or SVC_STATUS_RECONFIG_BUSY, or - * SVC_STATUS_RECONFIG_ERROR + * status is SVC_STATUS_COMPLETED, or SVC_STATUS_BUSY, or SVC_STATUS_ERROR * * @COMMAND_RECONFIG_STATUS: check the status of the configuration, return - * status is SVC_STATUS_RECONFIG_COMPLETED, or SVC_STATUS_RECONFIG_BUSY, or - * SVC_STATUS_RECONFIG_ERROR + * status is SVC_STATUS_COMPLETED, or SVC_STATUS_BUSY, or SVC_STATUS_ERROR * * @COMMAND_RSU_STATUS: request remote system update boot log, return status * is log data or SVC_STATUS_RSU_ERROR * * @COMMAND_RSU_UPDATE: set the offset of the bitstream to boot after reboot, - * return status is SVC_STATUS_RSU_OK or SVC_STATUS_RSU_ERROR + * return status is SVC_STATUS_OK or SVC_STATUS_ERROR * * @COMMAND_RSU_NOTIFY: report the status of hard processor system - * software to firmware, return status is SVC_STATUS_RSU_OK or - * SVC_STATUS_RSU_ERROR + * software to firmware, return status is SVC_STATUS_OK or + * SVC_STATUS_ERROR * * @COMMAND_RSU_RETRY: query firmware for the current image's retry counter, - * return status is SVC_STATUS_RSU_OK or SVC_STATUS_RSU_ERROR + * return status is SVC_STATUS_OK or SVC_STATUS_ERROR */ enum stratix10_svc_command_code { COMMAND_NOOP = 0, |