diff options
Diffstat (limited to 'include/linux/phy.h')
| -rw-r--r-- | include/linux/phy.h | 148 |
1 files changed, 133 insertions, 15 deletions
diff --git a/include/linux/phy.h b/include/linux/phy.h index db7c0bd67559..1351b802ffcf 100644 --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -14,6 +14,7 @@ #include <linux/compiler.h> #include <linux/spinlock.h> #include <linux/ethtool.h> +#include <linux/leds.h> #include <linux/linkmode.h> #include <linux/netlink.h> #include <linux/mdio.h> @@ -85,6 +86,7 @@ extern const int phy_10gbit_features_array[1]; #define PHY_IS_INTERNAL 0x00000001 #define PHY_RST_AFTER_CLK_EN 0x00000002 #define PHY_POLL_CABLE_TEST 0x00000004 +#define PHY_ALWAYS_CALL_SUSPEND 0x00000008 #define MDIO_DEVICE_IS_PHY 0x80000000 /** @@ -108,6 +110,7 @@ extern const int phy_10gbit_features_array[1]; * @PHY_INTERFACE_MODE_XGMII: 10 gigabit media-independent interface * @PHY_INTERFACE_MODE_XLGMII:40 gigabit media-independent interface * @PHY_INTERFACE_MODE_MOCA: Multimedia over Coax + * @PHY_INTERFACE_MODE_PSGMII: Penta SGMII * @PHY_INTERFACE_MODE_QSGMII: Quad SGMII * @PHY_INTERFACE_MODE_TRGMII: Turbo RGMII * @PHY_INTERFACE_MODE_100BASEX: 100 BaseX @@ -145,6 +148,7 @@ typedef enum { PHY_INTERFACE_MODE_XGMII, PHY_INTERFACE_MODE_XLGMII, PHY_INTERFACE_MODE_MOCA, + PHY_INTERFACE_MODE_PSGMII, PHY_INTERFACE_MODE_QSGMII, PHY_INTERFACE_MODE_TRGMII, PHY_INTERFACE_MODE_100BASEX, @@ -252,6 +256,8 @@ static inline const char *phy_modes(phy_interface_t interface) return "xlgmii"; case PHY_INTERFACE_MODE_MOCA: return "moca"; + case PHY_INTERFACE_MODE_PSGMII: + return "psgmii"; case PHY_INTERFACE_MODE_QSGMII: return "qsgmii"; case PHY_INTERFACE_MODE_TRGMII: @@ -296,6 +302,7 @@ static inline const char *phy_modes(phy_interface_t interface) #define MII_BUS_ID_SIZE 61 struct device; +struct kernel_hwtstamp_config; struct phylink; struct sfp_bus; struct sfp_upstream_ops; @@ -495,14 +502,17 @@ struct phy_device *mdiobus_scan_c22(struct mii_bus *bus, int addr); * Once complete, move to UP to restart the PHY. * - phy_stop aborts the running test and moves to @PHY_HALTED * - * @PHY_HALTED: PHY is up, but no polling or interrupts are done. Or - * PHY is in an error state. + * @PHY_HALTED: PHY is up, but no polling or interrupts are done. * - phy_start moves to @PHY_UP + * + * @PHY_ERROR: PHY is up, but is in an error state. + * - phy_stop moves to @PHY_HALTED */ enum phy_state { PHY_DOWN = 0, PHY_READY, PHY_HALTED, + PHY_ERROR, PHY_UP, PHY_RUNNING, PHY_NOLINK, @@ -547,6 +557,8 @@ struct macsec_ops; * @downshifted_rate: Set true if link speed has been downshifted. * @is_on_sfp_module: Set true if PHY is located on an SFP module. * @mac_managed_pm: Set true if MAC driver takes of suspending/resuming PHY + * @wol_enabled: Set to true if the PHY or the attached MAC have Wake-on-LAN + * enabled. * @state: State of the PHY for management purposes * @dev_flags: Device-specific flags used by the PHY driver. * @@ -600,6 +612,7 @@ struct macsec_ops; * @phy_num_led_triggers: Number of triggers in @phy_led_triggers * @led_link_trigger: LED trigger for link up/down * @last_triggered: last LED trigger for link speed + * @leds: list of PHY LED structures * @master_slave_set: User requested master/slave configuration * @master_slave_get: Current master/slave advertisement * @master_slave_state: Current master/slave configuration @@ -642,6 +655,7 @@ struct phy_device { unsigned downshifted_rate:1; unsigned is_on_sfp_module:1; unsigned mac_managed_pm:1; + unsigned wol_enabled:1; unsigned autoneg:1; /* The most recently read link state */ @@ -699,6 +713,7 @@ struct phy_device { struct phy_led_trigger *led_link_trigger; #endif + struct list_head leds; /* * Interrupt number for this PHY @@ -835,6 +850,23 @@ struct phy_plca_status { }; /** + * struct phy_led: An LED driven by the PHY + * + * @list: List of LEDs + * @phydev: PHY this LED is attached to + * @led_cdev: Standard LED class structure + * @index: Number of the LED + */ +struct phy_led { + struct list_head list; + struct phy_device *phydev; + struct led_classdev led_cdev; + u8 index; +}; + +#define to_phy_led(d) container_of(d, struct phy_led, led_cdev) + +/** * struct phy_driver - Driver structure for a particular PHY type * * @mdiodrv: Data common to all MDIO devices @@ -1056,6 +1088,60 @@ struct phy_driver { /** @get_plca_status: Return the current PLCA status info */ int (*get_plca_status)(struct phy_device *dev, struct phy_plca_status *plca_st); + + /** + * @led_brightness_set: Set a PHY LED brightness. Index + * indicates which of the PHYs led should be set. Value + * follows the standard LED class meaning, e.g. LED_OFF, + * LED_HALF, LED_FULL. + */ + int (*led_brightness_set)(struct phy_device *dev, + u8 index, enum led_brightness value); + + /** + * @led_blink_set: Set a PHY LED brightness. Index indicates + * which of the PHYs led should be configured to blink. Delays + * are in milliseconds and if both are zero then a sensible + * default should be chosen. The call should adjust the + * timings in that case and if it can't match the values + * specified exactly. + */ + int (*led_blink_set)(struct phy_device *dev, u8 index, + unsigned long *delay_on, + unsigned long *delay_off); + /** + * @led_hw_is_supported: Can the HW support the given rules. + * @dev: PHY device which has the LED + * @index: Which LED of the PHY device + * @rules The core is interested in these rules + * + * Return 0 if yes, -EOPNOTSUPP if not, or an error code. + */ + int (*led_hw_is_supported)(struct phy_device *dev, u8 index, + unsigned long rules); + /** + * @led_hw_control_set: Set the HW to control the LED + * @dev: PHY device which has the LED + * @index: Which LED of the PHY device + * @rules The rules used to control the LED + * + * Returns 0, or a an error code. + */ + int (*led_hw_control_set)(struct phy_device *dev, u8 index, + unsigned long rules); + /** + * @led_hw_control_get: Get how the HW is controlling the LED + * @dev: PHY device which has the LED + * @index: Which LED of the PHY device + * @rules Pointer to the rules used to control the LED + * + * Set *@rules to how the HW is currently blinking. Returns 0 + * on success, or a error code if the current blinking cannot + * be represented in rules, or some other error happens. + */ + int (*led_hw_control_get)(struct phy_device *dev, u8 index, + unsigned long *rules); + }; #define to_phy_driver(d) container_of(to_mdio_common_driver(d), \ struct phy_driver, mdiodrv) @@ -1067,6 +1153,34 @@ struct phy_driver { #define PHY_ID_MATCH_MODEL(id) .phy_id = (id), .phy_id_mask = GENMASK(31, 4) #define PHY_ID_MATCH_VENDOR(id) .phy_id = (id), .phy_id_mask = GENMASK(31, 10) +/** + * phy_id_compare - compare @id1 with @id2 taking account of @mask + * @id1: first PHY ID + * @id2: second PHY ID + * @mask: the PHY ID mask, set bits are significant in matching + * + * Return true if the bits from @id1 and @id2 specified by @mask match. + * This uses an equivalent test to (@id & @mask) == (@phy_id & @mask). + */ +static inline bool phy_id_compare(u32 id1, u32 id2, u32 mask) +{ + return !((id1 ^ id2) & mask); +} + +/** + * phydev_id_compare - compare @id with the PHY's Clause 22 ID + * @phydev: the PHY device + * @id: the PHY ID to be matched + * + * Compare the @phydev clause 22 ID with the provided @id and return true or + * false depending whether it matches, using the bound driver mask. The + * @phydev must be bound to a driver. + */ +static inline bool phydev_id_compare(struct phy_device *phydev, u32 id) +{ + return phy_id_compare(id, phydev->phy_id, phydev->drv->phy_id_mask); +} + /* A Structure for boards to register fixups with the PHY Lib */ struct phy_fixup { struct list_head list; @@ -1130,16 +1244,17 @@ static inline int phy_read(struct phy_device *phydev, u32 regnum) #define phy_read_poll_timeout(phydev, regnum, val, cond, sleep_us, \ timeout_us, sleep_before_read) \ ({ \ - int __ret = read_poll_timeout(phy_read, val, (cond) || val < 0, \ + int __ret, __val; \ + __ret = read_poll_timeout(__val = phy_read, val, \ + __val < 0 || (cond), \ sleep_us, timeout_us, sleep_before_read, phydev, regnum); \ - if (val < 0) \ - __ret = val; \ + if (__val < 0) \ + __ret = __val; \ if (__ret) \ phydev_err(phydev, "%s failed: %d\n", __func__, __ret); \ __ret; \ }) - /** * __phy_read - convenience function for reading a given PHY register * @phydev: the phy_device struct @@ -1227,11 +1342,13 @@ int phy_read_mmd(struct phy_device *phydev, int devad, u32 regnum); #define phy_read_mmd_poll_timeout(phydev, devaddr, regnum, val, cond, \ sleep_us, timeout_us, sleep_before_read) \ ({ \ - int __ret = read_poll_timeout(phy_read_mmd, val, (cond) || val < 0, \ + int __ret, __val; \ + __ret = read_poll_timeout(__val = phy_read_mmd, val, \ + __val < 0 || (cond), \ sleep_us, timeout_us, sleep_before_read, \ phydev, devaddr, regnum); \ - if (val < 0) \ - __ret = val; \ + if (__val < 0) \ + __ret = __val; \ if (__ret) \ phydev_err(phydev, "%s failed: %d\n", __func__, __ret); \ __ret; \ @@ -1652,10 +1769,6 @@ int phy_start_cable_test_tdr(struct phy_device *phydev, } #endif -int phy_cable_test_result(struct phy_device *phydev, u8 pair, u16 result); -int phy_cable_test_fault_length(struct phy_device *phydev, u8 pair, - u16 cm); - static inline void phy_device_reset(struct phy_device *phydev, int value) { mdio_device_reset(&phydev->mdio, value); @@ -1747,6 +1860,7 @@ int genphy_c45_an_config_aneg(struct phy_device *phydev); int genphy_c45_an_disable_aneg(struct phy_device *phydev); int genphy_c45_read_mdix(struct phy_device *phydev); int genphy_c45_pma_read_abilities(struct phy_device *phydev); +int genphy_c45_pma_baset1_read_abilities(struct phy_device *phydev); int genphy_c45_read_eee_abilities(struct phy_device *phydev); int genphy_c45_pma_baset1_read_master_slave(struct phy_device *phydev); int genphy_c45_read_status(struct phy_device *phydev); @@ -1860,10 +1974,8 @@ void phy_package_leave(struct phy_device *phydev); int devm_phy_package_join(struct device *dev, struct phy_device *phydev, int addr, size_t priv_size); -#if IS_ENABLED(CONFIG_PHYLIB) int __init mdio_bus_init(void); void mdio_bus_exit(void); -#endif int phy_ethtool_get_strings(struct phy_device *phydev, u8 *data); int phy_ethtool_get_sset_count(struct phy_device *phydev); @@ -1877,6 +1989,12 @@ int phy_ethtool_set_plca_cfg(struct phy_device *phydev, int phy_ethtool_get_plca_status(struct phy_device *phydev, struct phy_plca_status *plca_st); +int __phy_hwtstamp_get(struct phy_device *phydev, + struct kernel_hwtstamp_config *config); +int __phy_hwtstamp_set(struct phy_device *phydev, + struct kernel_hwtstamp_config *config, + struct netlink_ext_ack *extack); + static inline int phy_package_read(struct phy_device *phydev, u32 regnum) { struct phy_package_shared *shared = phydev->shared; |