diff options
Diffstat (limited to 'include/uapi')
132 files changed, 5844 insertions, 731 deletions
diff --git a/include/uapi/asm-generic/bitsperlong.h b/include/uapi/asm-generic/bitsperlong.h index 693d9a40eb7b..352cb81947b8 100644 --- a/include/uapi/asm-generic/bitsperlong.h +++ b/include/uapi/asm-generic/bitsperlong.h @@ -2,6 +2,17 @@ #ifndef _UAPI__ASM_GENERIC_BITS_PER_LONG #define _UAPI__ASM_GENERIC_BITS_PER_LONG +#ifndef __BITS_PER_LONG +/* + * In order to keep safe and avoid regression, only unify uapi + * bitsperlong.h for some archs which are using newer toolchains + * that have the definitions of __CHAR_BIT__ and __SIZEOF_LONG__. + * See the following link for more info: + * https://lore.kernel.org/linux-arch/b9624545-2c80-49a1-ac3c-39264a591f7b@app.fastmail.com/ + */ +#if defined(__CHAR_BIT__) && defined(__SIZEOF_LONG__) +#define __BITS_PER_LONG (__CHAR_BIT__ * __SIZEOF_LONG__) +#else /* * There seems to be no way of detecting this automatically from user * space, so 64 bit architectures should override this in their @@ -9,8 +20,8 @@ * both 32 and 64 bit user space must not rely on CONFIG_64BIT * to decide it, but rather check a compiler provided macro. */ -#ifndef __BITS_PER_LONG #define __BITS_PER_LONG 32 #endif +#endif #endif /* _UAPI__ASM_GENERIC_BITS_PER_LONG */ diff --git a/include/uapi/asm-generic/siginfo.h b/include/uapi/asm-generic/siginfo.h index ffbe4cec9f32..0f52d0ac47c5 100644 --- a/include/uapi/asm-generic/siginfo.h +++ b/include/uapi/asm-generic/siginfo.h @@ -242,7 +242,8 @@ typedef struct siginfo { #define SEGV_ADIPERR 7 /* Precise MCD exception */ #define SEGV_MTEAERR 8 /* Asynchronous ARM MTE error */ #define SEGV_MTESERR 9 /* Synchronous ARM MTE exception */ -#define NSIGSEGV 9 +#define SEGV_CPERR 10 /* Control protection fault */ +#define NSIGSEGV 10 /* * SIGBUS si_codes diff --git a/include/uapi/asm-generic/socket.h b/include/uapi/asm-generic/socket.h index 638230899e98..8ce8a39a1e5f 100644 --- a/include/uapi/asm-generic/socket.h +++ b/include/uapi/asm-generic/socket.h @@ -132,6 +132,9 @@ #define SO_RCVMARK 75 +#define SO_PASSPIDFD 76 +#define SO_PEERPIDFD 77 + #if !defined(__KERNEL__) #if __BITS_PER_LONG == 64 || (defined(__x86_64__) && defined(__ILP32__)) diff --git a/include/uapi/asm-generic/unistd.h b/include/uapi/asm-generic/unistd.h index 45fa180cc56a..abe087c53b4b 100644 --- a/include/uapi/asm-generic/unistd.h +++ b/include/uapi/asm-generic/unistd.h @@ -38,12 +38,12 @@ __SYSCALL(__NR_io_destroy, sys_io_destroy) __SC_COMP(__NR_io_submit, sys_io_submit, compat_sys_io_submit) #define __NR_io_cancel 3 __SYSCALL(__NR_io_cancel, sys_io_cancel) + #if defined(__ARCH_WANT_TIME32_SYSCALLS) || __BITS_PER_LONG != 32 #define __NR_io_getevents 4 __SC_3264(__NR_io_getevents, sys_io_getevents_time32, sys_io_getevents) #endif -/* fs/xattr.c */ #define __NR_setxattr 5 __SYSCALL(__NR_setxattr, sys_setxattr) #define __NR_lsetxattr 6 @@ -68,58 +68,38 @@ __SYSCALL(__NR_removexattr, sys_removexattr) __SYSCALL(__NR_lremovexattr, sys_lremovexattr) #define __NR_fremovexattr 16 __SYSCALL(__NR_fremovexattr, sys_fremovexattr) - -/* fs/dcache.c */ #define __NR_getcwd 17 __SYSCALL(__NR_getcwd, sys_getcwd) - -/* fs/cookies.c */ #define __NR_lookup_dcookie 18 __SC_COMP(__NR_lookup_dcookie, sys_lookup_dcookie, compat_sys_lookup_dcookie) - -/* fs/eventfd.c */ #define __NR_eventfd2 19 __SYSCALL(__NR_eventfd2, sys_eventfd2) - -/* fs/eventpoll.c */ #define __NR_epoll_create1 20 __SYSCALL(__NR_epoll_create1, sys_epoll_create1) #define __NR_epoll_ctl 21 __SYSCALL(__NR_epoll_ctl, sys_epoll_ctl) #define __NR_epoll_pwait 22 __SC_COMP(__NR_epoll_pwait, sys_epoll_pwait, compat_sys_epoll_pwait) - -/* fs/fcntl.c */ #define __NR_dup 23 __SYSCALL(__NR_dup, sys_dup) #define __NR_dup3 24 __SYSCALL(__NR_dup3, sys_dup3) #define __NR3264_fcntl 25 __SC_COMP_3264(__NR3264_fcntl, sys_fcntl64, sys_fcntl, compat_sys_fcntl64) - -/* fs/inotify_user.c */ #define __NR_inotify_init1 26 __SYSCALL(__NR_inotify_init1, sys_inotify_init1) #define __NR_inotify_add_watch 27 __SYSCALL(__NR_inotify_add_watch, sys_inotify_add_watch) #define __NR_inotify_rm_watch 28 __SYSCALL(__NR_inotify_rm_watch, sys_inotify_rm_watch) - -/* fs/ioctl.c */ #define __NR_ioctl 29 __SC_COMP(__NR_ioctl, sys_ioctl, compat_sys_ioctl) - -/* fs/ioprio.c */ #define __NR_ioprio_set 30 __SYSCALL(__NR_ioprio_set, sys_ioprio_set) #define __NR_ioprio_get 31 __SYSCALL(__NR_ioprio_get, sys_ioprio_get) - -/* fs/locks.c */ #define __NR_flock 32 __SYSCALL(__NR_flock, sys_flock) - -/* fs/namei.c */ #define __NR_mknodat 33 __SYSCALL(__NR_mknodat, sys_mknodat) #define __NR_mkdirat 34 @@ -130,25 +110,21 @@ __SYSCALL(__NR_unlinkat, sys_unlinkat) __SYSCALL(__NR_symlinkat, sys_symlinkat) #define __NR_linkat 37 __SYSCALL(__NR_linkat, sys_linkat) + #ifdef __ARCH_WANT_RENAMEAT /* renameat is superseded with flags by renameat2 */ #define __NR_renameat 38 __SYSCALL(__NR_renameat, sys_renameat) #endif /* __ARCH_WANT_RENAMEAT */ -/* fs/namespace.c */ #define __NR_umount2 39 __SYSCALL(__NR_umount2, sys_umount) #define __NR_mount 40 __SYSCALL(__NR_mount, sys_mount) #define __NR_pivot_root 41 __SYSCALL(__NR_pivot_root, sys_pivot_root) - -/* fs/nfsctl.c */ #define __NR_nfsservctl 42 __SYSCALL(__NR_nfsservctl, sys_ni_syscall) - -/* fs/open.c */ #define __NR3264_statfs 43 __SC_COMP_3264(__NR3264_statfs, sys_statfs64, sys_statfs, \ compat_sys_statfs64) @@ -161,7 +137,6 @@ __SC_COMP_3264(__NR3264_truncate, sys_truncate64, sys_truncate, \ #define __NR3264_ftruncate 46 __SC_COMP_3264(__NR3264_ftruncate, sys_ftruncate64, sys_ftruncate, \ compat_sys_ftruncate64) - #define __NR_fallocate 47 __SC_COMP(__NR_fallocate, sys_fallocate, compat_sys_fallocate) #define __NR_faccessat 48 @@ -186,20 +161,12 @@ __SYSCALL(__NR_openat, sys_openat) __SYSCALL(__NR_close, sys_close) #define __NR_vhangup 58 __SYSCALL(__NR_vhangup, sys_vhangup) - -/* fs/pipe.c */ #define __NR_pipe2 59 __SYSCALL(__NR_pipe2, sys_pipe2) - -/* fs/quota.c */ #define __NR_quotactl 60 __SYSCALL(__NR_quotactl, sys_quotactl) - -/* fs/readdir.c */ #define __NR_getdents64 61 __SYSCALL(__NR_getdents64, sys_getdents64) - -/* fs/read_write.c */ #define __NR3264_lseek 62 __SC_3264(__NR3264_lseek, sys_llseek, sys_lseek) #define __NR_read 63 @@ -218,12 +185,9 @@ __SC_COMP(__NR_pwrite64, sys_pwrite64, compat_sys_pwrite64) __SC_COMP(__NR_preadv, sys_preadv, compat_sys_preadv) #define __NR_pwritev 70 __SC_COMP(__NR_pwritev, sys_pwritev, compat_sys_pwritev) - -/* fs/sendfile.c */ #define __NR3264_sendfile 71 __SYSCALL(__NR3264_sendfile, sys_sendfile64) -/* fs/select.c */ #if defined(__ARCH_WANT_TIME32_SYSCALLS) || __BITS_PER_LONG != 32 #define __NR_pselect6 72 __SC_COMP_3264(__NR_pselect6, sys_pselect6_time32, sys_pselect6, compat_sys_pselect6_time32) @@ -231,21 +195,17 @@ __SC_COMP_3264(__NR_pselect6, sys_pselect6_time32, sys_pselect6, compat_sys_psel __SC_COMP_3264(__NR_ppoll, sys_ppoll_time32, sys_ppoll, compat_sys_ppoll_time32) #endif -/* fs/signalfd.c */ #define __NR_signalfd4 74 __SC_COMP(__NR_signalfd4, sys_signalfd4, compat_sys_signalfd4) - -/* fs/splice.c */ #define __NR_vmsplice 75 __SYSCALL(__NR_vmsplice, sys_vmsplice) #define __NR_splice 76 __SYSCALL(__NR_splice, sys_splice) #define __NR_tee 77 __SYSCALL(__NR_tee, sys_tee) - -/* fs/stat.c */ #define __NR_readlinkat 78 __SYSCALL(__NR_readlinkat, sys_readlinkat) + #if defined(__ARCH_WANT_NEW_STAT) || defined(__ARCH_WANT_STAT64) #define __NR3264_fstatat 79 __SC_3264(__NR3264_fstatat, sys_fstatat64, sys_newfstatat) @@ -253,13 +213,13 @@ __SC_3264(__NR3264_fstatat, sys_fstatat64, sys_newfstatat) __SC_3264(__NR3264_fstat, sys_fstat64, sys_newfstat) #endif -/* fs/sync.c */ #define __NR_sync 81 __SYSCALL(__NR_sync, sys_sync) #define __NR_fsync 82 __SYSCALL(__NR_fsync, sys_fsync) #define __NR_fdatasync 83 __SYSCALL(__NR_fdatasync, sys_fdatasync) + #ifdef __ARCH_WANT_SYNC_FILE_RANGE2 #define __NR_sync_file_range2 84 __SC_COMP(__NR_sync_file_range2, sys_sync_file_range2, \ @@ -270,9 +230,9 @@ __SC_COMP(__NR_sync_file_range, sys_sync_file_range, \ compat_sys_sync_file_range) #endif -/* fs/timerfd.c */ #define __NR_timerfd_create 85 __SYSCALL(__NR_timerfd_create, sys_timerfd_create) + #if defined(__ARCH_WANT_TIME32_SYSCALLS) || __BITS_PER_LONG != 32 #define __NR_timerfd_settime 86 __SC_3264(__NR_timerfd_settime, sys_timerfd_settime32, \ @@ -282,45 +242,35 @@ __SC_3264(__NR_timerfd_gettime, sys_timerfd_gettime32, \ sys_timerfd_gettime) #endif -/* fs/utimes.c */ #if defined(__ARCH_WANT_TIME32_SYSCALLS) || __BITS_PER_LONG != 32 #define __NR_utimensat 88 __SC_3264(__NR_utimensat, sys_utimensat_time32, sys_utimensat) #endif -/* kernel/acct.c */ #define __NR_acct 89 __SYSCALL(__NR_acct, sys_acct) - -/* kernel/capability.c */ #define __NR_capget 90 __SYSCALL(__NR_capget, sys_capget) #define __NR_capset 91 __SYSCALL(__NR_capset, sys_capset) - -/* kernel/exec_domain.c */ #define __NR_personality 92 __SYSCALL(__NR_personality, sys_personality) - -/* kernel/exit.c */ #define __NR_exit 93 __SYSCALL(__NR_exit, sys_exit) #define __NR_exit_group 94 __SYSCALL(__NR_exit_group, sys_exit_group) #define __NR_waitid 95 __SC_COMP(__NR_waitid, sys_waitid, compat_sys_waitid) - -/* kernel/fork.c */ #define __NR_set_tid_address 96 __SYSCALL(__NR_set_tid_address, sys_set_tid_address) #define __NR_unshare 97 __SYSCALL(__NR_unshare, sys_unshare) -/* kernel/futex.c */ #if defined(__ARCH_WANT_TIME32_SYSCALLS) || __BITS_PER_LONG != 32 #define __NR_futex 98 __SC_3264(__NR_futex, sys_futex_time32, sys_futex) #endif + #define __NR_set_robust_list 99 __SC_COMP(__NR_set_robust_list, sys_set_robust_list, \ compat_sys_set_robust_list) @@ -328,43 +278,40 @@ __SC_COMP(__NR_set_robust_list, sys_set_robust_list, \ __SC_COMP(__NR_get_robust_list, sys_get_robust_list, \ compat_sys_get_robust_list) -/* kernel/hrtimer.c */ #if defined(__ARCH_WANT_TIME32_SYSCALLS) || __BITS_PER_LONG != 32 #define __NR_nanosleep 101 __SC_3264(__NR_nanosleep, sys_nanosleep_time32, sys_nanosleep) #endif -/* kernel/itimer.c */ #define __NR_getitimer 102 __SC_COMP(__NR_getitimer, sys_getitimer, compat_sys_getitimer) #define __NR_setitimer 103 __SC_COMP(__NR_setitimer, sys_setitimer, compat_sys_setitimer) - -/* kernel/kexec.c */ #define __NR_kexec_load 104 __SC_COMP(__NR_kexec_load, sys_kexec_load, compat_sys_kexec_load) - -/* kernel/module.c */ #define __NR_init_module 105 __SYSCALL(__NR_init_module, sys_init_module) #define __NR_delete_module 106 __SYSCALL(__NR_delete_module, sys_delete_module) - -/* kernel/posix-timers.c */ #define __NR_timer_create 107 __SC_COMP(__NR_timer_create, sys_timer_create, compat_sys_timer_create) + #if defined(__ARCH_WANT_TIME32_SYSCALLS) || __BITS_PER_LONG != 32 #define __NR_timer_gettime 108 __SC_3264(__NR_timer_gettime, sys_timer_gettime32, sys_timer_gettime) #endif + #define __NR_timer_getoverrun 109 __SYSCALL(__NR_timer_getoverrun, sys_timer_getoverrun) + #if defined(__ARCH_WANT_TIME32_SYSCALLS) || __BITS_PER_LONG != 32 #define __NR_timer_settime 110 __SC_3264(__NR_timer_settime, sys_timer_settime32, sys_timer_settime) #endif + #define __NR_timer_delete 111 __SYSCALL(__NR_timer_delete, sys_timer_delete) + #if defined(__ARCH_WANT_TIME32_SYSCALLS) || __BITS_PER_LONG != 32 #define __NR_clock_settime 112 __SC_3264(__NR_clock_settime, sys_clock_settime32, sys_clock_settime) @@ -377,15 +324,10 @@ __SC_3264(__NR_clock_nanosleep, sys_clock_nanosleep_time32, \ sys_clock_nanosleep) #endif -/* kernel/printk.c */ #define __NR_syslog 116 __SYSCALL(__NR_syslog, sys_syslog) - -/* kernel/ptrace.c */ #define __NR_ptrace 117 __SC_COMP(__NR_ptrace, sys_ptrace, compat_sys_ptrace) - -/* kernel/sched/core.c */ #define __NR_sched_setparam 118 __SYSCALL(__NR_sched_setparam, sys_sched_setparam) #define __NR_sched_setscheduler 119 @@ -406,13 +348,13 @@ __SYSCALL(__NR_sched_yield, sys_sched_yield) __SYSCALL(__NR_sched_get_priority_max, sys_sched_get_priority_max) #define __NR_sched_get_priority_min 126 __SYSCALL(__NR_sched_get_priority_min, sys_sched_get_priority_min) + #if defined(__ARCH_WANT_TIME32_SYSCALLS) || __BITS_PER_LONG != 32 #define __NR_sched_rr_get_interval 127 __SC_3264(__NR_sched_rr_get_interval, sys_sched_rr_get_interval_time32, \ sys_sched_rr_get_interval) #endif -/* kernel/signal.c */ #define __NR_restart_syscall 128 __SYSCALL(__NR_restart_syscall, sys_restart_syscall) #define __NR_kill 129 @@ -431,18 +373,18 @@ __SC_COMP(__NR_rt_sigaction, sys_rt_sigaction, compat_sys_rt_sigaction) __SC_COMP(__NR_rt_sigprocmask, sys_rt_sigprocmask, compat_sys_rt_sigprocmask) #define __NR_rt_sigpending 136 __SC_COMP(__NR_rt_sigpending, sys_rt_sigpending, compat_sys_rt_sigpending) + #if defined(__ARCH_WANT_TIME32_SYSCALLS) || __BITS_PER_LONG != 32 #define __NR_rt_sigtimedwait 137 __SC_COMP_3264(__NR_rt_sigtimedwait, sys_rt_sigtimedwait_time32, \ sys_rt_sigtimedwait, compat_sys_rt_sigtimedwait_time32) #endif + #define __NR_rt_sigqueueinfo 138 __SC_COMP(__NR_rt_sigqueueinfo, sys_rt_sigqueueinfo, \ compat_sys_rt_sigqueueinfo) #define __NR_rt_sigreturn 139 __SC_COMP(__NR_rt_sigreturn, sys_rt_sigreturn, compat_sys_rt_sigreturn) - -/* kernel/sys.c */ #define __NR_setpriority 140 __SYSCALL(__NR_setpriority, sys_setpriority) #define __NR_getpriority 141 @@ -507,7 +449,6 @@ __SYSCALL(__NR_prctl, sys_prctl) #define __NR_getcpu 168 __SYSCALL(__NR_getcpu, sys_getcpu) -/* kernel/time.c */ #if defined(__ARCH_WANT_TIME32_SYSCALLS) || __BITS_PER_LONG != 32 #define __NR_gettimeofday 169 __SC_COMP(__NR_gettimeofday, sys_gettimeofday, compat_sys_gettimeofday) @@ -517,7 +458,6 @@ __SC_COMP(__NR_settimeofday, sys_settimeofday, compat_sys_settimeofday) __SC_3264(__NR_adjtimex, sys_adjtimex_time32, sys_adjtimex) #endif -/* kernel/sys.c */ #define __NR_getpid 172 __SYSCALL(__NR_getpid, sys_getpid) #define __NR_getppid 173 @@ -534,12 +474,11 @@ __SYSCALL(__NR_getegid, sys_getegid) __SYSCALL(__NR_gettid, sys_gettid) #define __NR_sysinfo 179 __SC_COMP(__NR_sysinfo, sys_sysinfo, compat_sys_sysinfo) - -/* ipc/mqueue.c */ #define __NR_mq_open 180 __SC_COMP(__NR_mq_open, sys_mq_open, compat_sys_mq_open) #define __NR_mq_unlink 181 __SYSCALL(__NR_mq_unlink, sys_mq_unlink) + #if defined(__ARCH_WANT_TIME32_SYSCALLS) || __BITS_PER_LONG != 32 #define __NR_mq_timedsend 182 __SC_3264(__NR_mq_timedsend, sys_mq_timedsend_time32, sys_mq_timedsend) @@ -547,12 +486,11 @@ __SC_3264(__NR_mq_timedsend, sys_mq_timedsend_time32, sys_mq_timedsend) __SC_3264(__NR_mq_timedreceive, sys_mq_timedreceive_time32, \ sys_mq_timedreceive) #endif + #define __NR_mq_notify 184 __SC_COMP(__NR_mq_notify, sys_mq_notify, compat_sys_mq_notify) #define __NR_mq_getsetattr 185 __SC_COMP(__NR_mq_getsetattr, sys_mq_getsetattr, compat_sys_mq_getsetattr) - -/* ipc/msg.c */ #define __NR_msgget 186 __SYSCALL(__NR_msgget, sys_msgget) #define __NR_msgctl 187 @@ -561,20 +499,18 @@ __SC_COMP(__NR_msgctl, sys_msgctl, compat_sys_msgctl) __SC_COMP(__NR_msgrcv, sys_msgrcv, compat_sys_msgrcv) #define __NR_msgsnd 189 __SC_COMP(__NR_msgsnd, sys_msgsnd, compat_sys_msgsnd) - -/* ipc/sem.c */ #define __NR_semget 190 __SYSCALL(__NR_semget, sys_semget) #define __NR_semctl 191 __SC_COMP(__NR_semctl, sys_semctl, compat_sys_semctl) + #if defined(__ARCH_WANT_TIME32_SYSCALLS) || __BITS_PER_LONG != 32 #define __NR_semtimedop 192 __SC_3264(__NR_semtimedop, sys_semtimedop_time32, sys_semtimedop) #endif + #define __NR_semop 193 __SYSCALL(__NR_semop, sys_semop) - -/* ipc/shm.c */ #define __NR_shmget 194 __SYSCALL(__NR_shmget, sys_shmget) #define __NR_shmctl 195 @@ -583,8 +519,6 @@ __SC_COMP(__NR_shmctl, sys_shmctl, compat_sys_shmctl) __SC_COMP(__NR_shmat, sys_shmat, compat_sys_shmat) #define __NR_shmdt 197 __SYSCALL(__NR_shmdt, sys_shmdt) - -/* net/socket.c */ #define __NR_socket 198 __SYSCALL(__NR_socket, sys_socket) #define __NR_socketpair 199 @@ -615,40 +549,30 @@ __SYSCALL(__NR_shutdown, sys_shutdown) __SC_COMP(__NR_sendmsg, sys_sendmsg, compat_sys_sendmsg) #define __NR_recvmsg 212 __SC_COMP(__NR_recvmsg, sys_recvmsg, compat_sys_recvmsg) - -/* mm/filemap.c */ #define __NR_readahead 213 __SC_COMP(__NR_readahead, sys_readahead, compat_sys_readahead) - -/* mm/nommu.c, also with MMU */ #define __NR_brk 214 __SYSCALL(__NR_brk, sys_brk) #define __NR_munmap 215 __SYSCALL(__NR_munmap, sys_munmap) #define __NR_mremap 216 __SYSCALL(__NR_mremap, sys_mremap) - -/* security/keys/keyctl.c */ #define __NR_add_key 217 __SYSCALL(__NR_add_key, sys_add_key) #define __NR_request_key 218 __SYSCALL(__NR_request_key, sys_request_key) #define __NR_keyctl 219 __SC_COMP(__NR_keyctl, sys_keyctl, compat_sys_keyctl) - -/* arch/example/kernel/sys_example.c */ #define __NR_clone 220 __SYSCALL(__NR_clone, sys_clone) #define __NR_execve 221 __SC_COMP(__NR_execve, sys_execve, compat_sys_execve) - #define __NR3264_mmap 222 __SC_3264(__NR3264_mmap, sys_mmap2, sys_mmap) -/* mm/fadvise.c */ #define __NR3264_fadvise64 223 __SC_COMP(__NR3264_fadvise64, sys_fadvise64_64, compat_sys_fadvise64_64) -/* mm/, CONFIG_MMU only */ +/* CONFIG_MMU only */ #ifndef __ARCH_NOMMU #define __NR_swapon 224 __SYSCALL(__NR_swapon, sys_swapon) @@ -691,6 +615,7 @@ __SC_COMP(__NR_rt_tgsigqueueinfo, sys_rt_tgsigqueueinfo, \ __SYSCALL(__NR_perf_event_open, sys_perf_event_open) #define __NR_accept4 242 __SYSCALL(__NR_accept4, sys_accept4) + #if defined(__ARCH_WANT_TIME32_SYSCALLS) || __BITS_PER_LONG != 32 #define __NR_recvmmsg 243 __SC_COMP_3264(__NR_recvmmsg, sys_recvmmsg_time32, sys_recvmmsg, compat_sys_recvmmsg_time32) @@ -706,6 +631,7 @@ __SC_COMP_3264(__NR_recvmmsg, sys_recvmmsg_time32, sys_recvmmsg, compat_sys_recv #define __NR_wait4 260 __SC_COMP(__NR_wait4, sys_wait4, compat_sys_wait4) #endif + #define __NR_prlimit64 261 __SYSCALL(__NR_prlimit64, sys_prlimit64) #define __NR_fanotify_init 262 @@ -716,10 +642,12 @@ __SYSCALL(__NR_fanotify_mark, sys_fanotify_mark) __SYSCALL(__NR_name_to_handle_at, sys_name_to_handle_at) #define __NR_open_by_handle_at 265 __SYSCALL(__NR_open_by_handle_at, sys_open_by_handle_at) + #if defined(__ARCH_WANT_TIME32_SYSCALLS) || __BITS_PER_LONG != 32 #define __NR_clock_adjtime 266 __SC_3264(__NR_clock_adjtime, sys_clock_adjtime32, sys_clock_adjtime) #endif + #define __NR_syncfs 267 __SYSCALL(__NR_syncfs, sys_syncfs) #define __NR_setns 268 @@ -770,15 +698,19 @@ __SYSCALL(__NR_pkey_alloc, sys_pkey_alloc) __SYSCALL(__NR_pkey_free, sys_pkey_free) #define __NR_statx 291 __SYSCALL(__NR_statx, sys_statx) + #if defined(__ARCH_WANT_TIME32_SYSCALLS) || __BITS_PER_LONG != 32 #define __NR_io_pgetevents 292 __SC_COMP_3264(__NR_io_pgetevents, sys_io_pgetevents_time32, sys_io_pgetevents, compat_sys_io_pgetevents) #endif + #define __NR_rseq 293 __SYSCALL(__NR_rseq, sys_rseq) #define __NR_kexec_file_load 294 __SYSCALL(__NR_kexec_file_load, sys_kexec_file_load) + /* 295 through 402 are unassigned to sync up with generic numbers, don't use */ + #if defined(__SYSCALL_COMPAT) || __BITS_PER_LONG == 32 #define __NR_clock_gettime64 403 __SYSCALL(__NR_clock_gettime64, sys_clock_gettime) @@ -844,13 +776,14 @@ __SYSCALL(__NR_fsmount, sys_fsmount) __SYSCALL(__NR_fspick, sys_fspick) #define __NR_pidfd_open 434 __SYSCALL(__NR_pidfd_open, sys_pidfd_open) + #ifdef __ARCH_WANT_SYS_CLONE3 #define __NR_clone3 435 __SYSCALL(__NR_clone3, sys_clone3) #endif + #define __NR_close_range 436 __SYSCALL(__NR_close_range, sys_close_range) - #define __NR_openat2 437 __SYSCALL(__NR_openat2, sys_openat2) #define __NR_pidfd_getfd 438 @@ -865,7 +798,6 @@ __SC_COMP(__NR_epoll_pwait2, sys_epoll_pwait2, compat_sys_epoll_pwait2) __SYSCALL(__NR_mount_setattr, sys_mount_setattr) #define __NR_quotactl_fd 443 __SYSCALL(__NR_quotactl_fd, sys_quotactl_fd) - #define __NR_landlock_create_ruleset 444 __SYSCALL(__NR_landlock_create_ruleset, sys_landlock_create_ruleset) #define __NR_landlock_add_rule 445 @@ -877,17 +809,22 @@ __SYSCALL(__NR_landlock_restrict_self, sys_landlock_restrict_self) #define __NR_memfd_secret 447 __SYSCALL(__NR_memfd_secret, sys_memfd_secret) #endif + #define __NR_process_mrelease 448 __SYSCALL(__NR_process_mrelease, sys_process_mrelease) - #define __NR_futex_waitv 449 __SYSCALL(__NR_futex_waitv, sys_futex_waitv) - #define __NR_set_mempolicy_home_node 450 __SYSCALL(__NR_set_mempolicy_home_node, sys_set_mempolicy_home_node) +#define __NR_cachestat 451 +__SYSCALL(__NR_cachestat, sys_cachestat) + +#define __NR_fchmodat2 452 +__SYSCALL(__NR_fchmodat2, sys_fchmodat2) + #undef __NR_syscalls -#define __NR_syscalls 451 +#define __NR_syscalls 453 /* * 32 bit systems traditionally used different diff --git a/include/uapi/drm/amdgpu_drm.h b/include/uapi/drm/amdgpu_drm.h index b6eb90df5d05..f477eda6a2b8 100644 --- a/include/uapi/drm/amdgpu_drm.h +++ b/include/uapi/drm/amdgpu_drm.h @@ -94,6 +94,9 @@ extern "C" { * * %AMDGPU_GEM_DOMAIN_OA Ordered append, used by 3D or Compute engines * for appending data. + * + * %AMDGPU_GEM_DOMAIN_DOORBELL Doorbell. It is an MMIO region for + * signalling user mode queues. */ #define AMDGPU_GEM_DOMAIN_CPU 0x1 #define AMDGPU_GEM_DOMAIN_GTT 0x2 @@ -101,12 +104,14 @@ extern "C" { #define AMDGPU_GEM_DOMAIN_GDS 0x8 #define AMDGPU_GEM_DOMAIN_GWS 0x10 #define AMDGPU_GEM_DOMAIN_OA 0x20 +#define AMDGPU_GEM_DOMAIN_DOORBELL 0x40 #define AMDGPU_GEM_DOMAIN_MASK (AMDGPU_GEM_DOMAIN_CPU | \ AMDGPU_GEM_DOMAIN_GTT | \ AMDGPU_GEM_DOMAIN_VRAM | \ AMDGPU_GEM_DOMAIN_GDS | \ AMDGPU_GEM_DOMAIN_GWS | \ - AMDGPU_GEM_DOMAIN_OA) + AMDGPU_GEM_DOMAIN_OA | \ + AMDGPU_GEM_DOMAIN_DOORBELL) /* Flag that CPU access will be required for the case of VRAM domain */ #define AMDGPU_GEM_CREATE_CPU_ACCESS_REQUIRED (1 << 0) @@ -245,6 +250,8 @@ union drm_amdgpu_bo_list { /* indicate some errors are detected by RAS */ #define AMDGPU_CTX_QUERY2_FLAGS_RAS_CE (1<<3) #define AMDGPU_CTX_QUERY2_FLAGS_RAS_UE (1<<4) +/* indicate that the reset hasn't completed yet */ +#define AMDGPU_CTX_QUERY2_FLAGS_RESET_IN_PROGRESS (1<<5) /* Context priority level */ #define AMDGPU_CTX_PRIORITY_UNSET -2048 @@ -592,6 +599,7 @@ struct drm_amdgpu_gem_va { #define AMDGPU_CHUNK_ID_SCHEDULED_DEPENDENCIES 0x07 #define AMDGPU_CHUNK_ID_SYNCOBJ_TIMELINE_WAIT 0x08 #define AMDGPU_CHUNK_ID_SYNCOBJ_TIMELINE_SIGNAL 0x09 +#define AMDGPU_CHUNK_ID_CP_GFX_SHADOW 0x0a struct drm_amdgpu_cs_chunk { __u32 chunk_id; @@ -708,6 +716,15 @@ struct drm_amdgpu_cs_chunk_data { }; }; +#define AMDGPU_CS_CHUNK_CP_GFX_SHADOW_FLAGS_INIT_SHADOW 0x1 + +struct drm_amdgpu_cs_chunk_cp_gfx_shadow { + __u64 shadow_va; + __u64 csa_va; + __u64 gds_va; + __u64 flags; +}; + /* * Query h/w info: Flag that this is integrated (a.h.a. fusion) GPU * @@ -876,6 +893,8 @@ struct drm_amdgpu_cs_chunk_data { #define AMDGPU_INFO_VIDEO_CAPS_DECODE 0 /* Subquery id: Encode */ #define AMDGPU_INFO_VIDEO_CAPS_ENCODE 1 +/* Query the max number of IBs per gang per submission */ +#define AMDGPU_INFO_MAX_IBS 0x22 #define AMDGPU_INFO_MMR_SE_INDEX_SHIFT 0 #define AMDGPU_INFO_MMR_SE_INDEX_MASK 0xff @@ -1126,6 +1145,14 @@ struct drm_amdgpu_info_device { __u64 mall_size; /* AKA infinity cache */ /* high 32 bits of the rb pipes mask */ __u32 enabled_rb_pipes_mask_hi; + /* shadow area size for gfx11 */ + __u32 shadow_size; + /* shadow area base virtual alignment for gfx11 */ + __u32 shadow_alignment; + /* context save area size for gfx11 */ + __u32 csa_size; + /* context save area base virtual alignment for gfx11 */ + __u32 csa_alignment; }; struct drm_amdgpu_info_hw_ip { diff --git a/include/uapi/drm/drm.h b/include/uapi/drm/drm.h index 642808520d92..794c1d857677 100644 --- a/include/uapi/drm/drm.h +++ b/include/uapi/drm/drm.h @@ -673,8 +673,11 @@ struct drm_gem_open { * Bitfield of supported PRIME sharing capabilities. See &DRM_PRIME_CAP_IMPORT * and &DRM_PRIME_CAP_EXPORT. * - * PRIME buffers are exposed as dma-buf file descriptors. See - * Documentation/gpu/drm-mm.rst, section "PRIME Buffer Sharing". + * Starting from kernel version 6.6, both &DRM_PRIME_CAP_IMPORT and + * &DRM_PRIME_CAP_EXPORT are always advertised. + * + * PRIME buffers are exposed as dma-buf file descriptors. + * See :ref:`prime_buffer_sharing`. */ #define DRM_CAP_PRIME 0x5 /** @@ -682,6 +685,8 @@ struct drm_gem_open { * * If this bit is set in &DRM_CAP_PRIME, the driver supports importing PRIME * buffers via the &DRM_IOCTL_PRIME_FD_TO_HANDLE ioctl. + * + * Starting from kernel version 6.6, this bit is always set in &DRM_CAP_PRIME. */ #define DRM_PRIME_CAP_IMPORT 0x1 /** @@ -689,6 +694,8 @@ struct drm_gem_open { * * If this bit is set in &DRM_CAP_PRIME, the driver supports exporting PRIME * buffers via the &DRM_IOCTL_PRIME_HANDLE_TO_FD ioctl. + * + * Starting from kernel version 6.6, this bit is always set in &DRM_CAP_PRIME. */ #define DRM_PRIME_CAP_EXPORT 0x2 /** @@ -756,15 +763,14 @@ struct drm_gem_open { /** * DRM_CAP_SYNCOBJ * - * If set to 1, the driver supports sync objects. See - * Documentation/gpu/drm-mm.rst, section "DRM Sync Objects". + * If set to 1, the driver supports sync objects. See :ref:`drm_sync_objects`. */ #define DRM_CAP_SYNCOBJ 0x13 /** * DRM_CAP_SYNCOBJ_TIMELINE * * If set to 1, the driver supports timeline operations on sync objects. See - * Documentation/gpu/drm-mm.rst, section "DRM Sync Objects". + * :ref:`drm_sync_objects`. */ #define DRM_CAP_SYNCOBJ_TIMELINE 0x14 @@ -909,6 +915,27 @@ struct drm_syncobj_timeline_wait { __u32 pad; }; +/** + * struct drm_syncobj_eventfd + * @handle: syncobj handle. + * @flags: Zero to wait for the point to be signalled, or + * &DRM_SYNCOBJ_WAIT_FLAGS_WAIT_AVAILABLE to wait for a fence to be + * available for the point. + * @point: syncobj timeline point (set to zero for binary syncobjs). + * @fd: Existing eventfd to sent events to. + * @pad: Must be zero. + * + * Register an eventfd to be signalled by a syncobj. The eventfd counter will + * be incremented by one. + */ +struct drm_syncobj_eventfd { + __u32 handle; + __u32 flags; + __u64 point; + __s32 fd; + __u32 pad; +}; + struct drm_syncobj_array { __u64 handles; @@ -972,6 +999,19 @@ extern "C" { #define DRM_IOCTL_GET_STATS DRM_IOR( 0x06, struct drm_stats) #define DRM_IOCTL_SET_VERSION DRM_IOWR(0x07, struct drm_set_version) #define DRM_IOCTL_MODESET_CTL DRM_IOW(0x08, struct drm_modeset_ctl) +/** + * DRM_IOCTL_GEM_CLOSE - Close a GEM handle. + * + * GEM handles are not reference-counted by the kernel. User-space is + * responsible for managing their lifetime. For example, if user-space imports + * the same memory object twice on the same DRM file description, the same GEM + * handle is returned by both imports, and user-space needs to ensure + * &DRM_IOCTL_GEM_CLOSE is performed once only. The same situation can happen + * when a memory object is allocated, then exported and imported again on the + * same DRM file description. The &DRM_IOCTL_MODE_GETFB2 IOCTL is an exception + * and always returns fresh new GEM handles even if an existing GEM handle + * already refers to the same memory object before the IOCTL is performed. + */ #define DRM_IOCTL_GEM_CLOSE DRM_IOW (0x09, struct drm_gem_close) #define DRM_IOCTL_GEM_FLINK DRM_IOWR(0x0a, struct drm_gem_flink) #define DRM_IOCTL_GEM_OPEN DRM_IOWR(0x0b, struct drm_gem_open) @@ -1012,7 +1052,37 @@ extern "C" { #define DRM_IOCTL_UNLOCK DRM_IOW( 0x2b, struct drm_lock) #define DRM_IOCTL_FINISH DRM_IOW( 0x2c, struct drm_lock) +/** + * DRM_IOCTL_PRIME_HANDLE_TO_FD - Convert a GEM handle to a DMA-BUF FD. + * + * User-space sets &drm_prime_handle.handle with the GEM handle to export and + * &drm_prime_handle.flags, and gets back a DMA-BUF file descriptor in + * &drm_prime_handle.fd. + * + * The export can fail for any driver-specific reason, e.g. because export is + * not supported for this specific GEM handle (but might be for others). + * + * Support for exporting DMA-BUFs is advertised via &DRM_PRIME_CAP_EXPORT. + */ #define DRM_IOCTL_PRIME_HANDLE_TO_FD DRM_IOWR(0x2d, struct drm_prime_handle) +/** + * DRM_IOCTL_PRIME_FD_TO_HANDLE - Convert a DMA-BUF FD to a GEM handle. + * + * User-space sets &drm_prime_handle.fd with a DMA-BUF file descriptor to + * import, and gets back a GEM handle in &drm_prime_handle.handle. + * &drm_prime_handle.flags is unused. + * + * If an existing GEM handle refers to the memory object backing the DMA-BUF, + * that GEM handle is returned. Therefore user-space which needs to handle + * arbitrary DMA-BUFs must have a user-space lookup data structure to manually + * reference-count duplicated GEM handles. For more information see + * &DRM_IOCTL_GEM_CLOSE. + * + * The import can fail for any driver-specific reason, e.g. because import is + * only supported for DMA-BUFs allocated on this DRM device. + * + * Support for importing DMA-BUFs is advertised via &DRM_PRIME_CAP_IMPORT. + */ #define DRM_IOCTL_PRIME_FD_TO_HANDLE DRM_IOWR(0x2e, struct drm_prime_handle) #define DRM_IOCTL_AGP_ACQUIRE DRM_IO( 0x30) @@ -1104,8 +1174,13 @@ extern "C" { * struct as the output. * * If the client is DRM master or has &CAP_SYS_ADMIN, &drm_mode_fb_cmd2.handles - * will be filled with GEM buffer handles. Planes are valid until one has a - * zero handle -- this can be used to compute the number of planes. + * will be filled with GEM buffer handles. Fresh new GEM handles are always + * returned, even if another GEM handle referring to the same memory object + * already exists on the DRM file description. The caller is responsible for + * removing the new handles, e.g. via the &DRM_IOCTL_GEM_CLOSE IOCTL. The same + * new handle will be returned for multiple planes in case they use the same + * memory object. Planes are valid until one has a zero handle -- this can be + * used to compute the number of planes. * * Otherwise, &drm_mode_fb_cmd2.handles will be zeroed and planes are valid * until one has a zero &drm_mode_fb_cmd2.pitches. @@ -1113,9 +1188,16 @@ extern "C" { * If the framebuffer has a format modifier, &DRM_MODE_FB_MODIFIERS will be set * in &drm_mode_fb_cmd2.flags and &drm_mode_fb_cmd2.modifier will contain the * modifier. Otherwise, user-space must ignore &drm_mode_fb_cmd2.modifier. + * + * To obtain DMA-BUF FDs for each plane without leaking GEM handles, user-space + * can export each handle via &DRM_IOCTL_PRIME_HANDLE_TO_FD, then immediately + * close each unique handle via &DRM_IOCTL_GEM_CLOSE, making sure to not + * double-close handles which are specified multiple times in the array. */ #define DRM_IOCTL_MODE_GETFB2 DRM_IOWR(0xCE, struct drm_mode_fb_cmd2) +#define DRM_IOCTL_SYNCOBJ_EVENTFD DRM_IOWR(0xCF, struct drm_syncobj_eventfd) + /* * Device specific ioctls should only be in their respective headers * The device specific ioctl range is from 0x40 to 0x9f. @@ -1127,25 +1209,50 @@ extern "C" { #define DRM_COMMAND_BASE 0x40 #define DRM_COMMAND_END 0xA0 -/* - * Header for events written back to userspace on the drm fd. The - * type defines the type of event, the length specifies the total - * length of the event (including the header), and user_data is - * typically a 64 bit value passed with the ioctl that triggered the - * event. A read on the drm fd will always only return complete - * events, that is, if for example the read buffer is 100 bytes, and - * there are two 64 byte events pending, only one will be returned. +/** + * struct drm_event - Header for DRM events + * @type: event type. + * @length: total number of payload bytes (including header). + * + * This struct is a header for events written back to user-space on the DRM FD. + * A read on the DRM FD will always only return complete events: e.g. if the + * read buffer is 100 bytes large and there are two 64 byte events pending, + * only one will be returned. * - * Event types 0 - 0x7fffffff are generic drm events, 0x80000000 and - * up are chipset specific. + * Event types 0 - 0x7fffffff are generic DRM events, 0x80000000 and + * up are chipset specific. Generic DRM events include &DRM_EVENT_VBLANK, + * &DRM_EVENT_FLIP_COMPLETE and &DRM_EVENT_CRTC_SEQUENCE. */ struct drm_event { __u32 type; __u32 length; }; +/** + * DRM_EVENT_VBLANK - vertical blanking event + * + * This event is sent in response to &DRM_IOCTL_WAIT_VBLANK with the + * &_DRM_VBLANK_EVENT flag set. + * + * The event payload is a struct drm_event_vblank. + */ #define DRM_EVENT_VBLANK 0x01 +/** + * DRM_EVENT_FLIP_COMPLETE - page-flip completion event + * + * This event is sent in response to an atomic commit or legacy page-flip with + * the &DRM_MODE_PAGE_FLIP_EVENT flag set. + * + * The event payload is a struct drm_event_vblank. + */ #define DRM_EVENT_FLIP_COMPLETE 0x02 +/** + * DRM_EVENT_CRTC_SEQUENCE - CRTC sequence event + * + * This event is sent in response to &DRM_IOCTL_CRTC_QUEUE_SEQUENCE. + * + * The event payload is a struct drm_event_crtc_sequence. + */ #define DRM_EVENT_CRTC_SEQUENCE 0x03 struct drm_event_vblank { diff --git a/include/uapi/drm/drm_fourcc.h b/include/uapi/drm/drm_fourcc.h index de703c6be969..8db7fd3f743e 100644 --- a/include/uapi/drm/drm_fourcc.h +++ b/include/uapi/drm/drm_fourcc.h @@ -658,6 +658,49 @@ extern "C" { #define I915_FORMAT_MOD_4_TILED_DG2_RC_CCS_CC fourcc_mod_code(INTEL, 12) /* + * Intel Color Control Surfaces (CCS) for display ver. 14 render compression. + * + * The main surface is tile4 and at plane index 0, the CCS is linear and + * at index 1. A 64B CCS cache line corresponds to an area of 4x1 tiles in + * main surface. In other words, 4 bits in CCS map to a main surface cache + * line pair. The main surface pitch is required to be a multiple of four + * tile4 widths. + */ +#define I915_FORMAT_MOD_4_TILED_MTL_RC_CCS fourcc_mod_code(INTEL, 13) + +/* + * Intel Color Control Surfaces (CCS) for display ver. 14 media compression + * + * The main surface is tile4 and at plane index 0, the CCS is linear and + * at index 1. A 64B CCS cache line corresponds to an area of 4x1 tiles in + * main surface. In other words, 4 bits in CCS map to a main surface cache + * line pair. The main surface pitch is required to be a multiple of four + * tile4 widths. For semi-planar formats like NV12, CCS planes follow the + * Y and UV planes i.e., planes 0 and 1 are used for Y and UV surfaces, + * planes 2 and 3 for the respective CCS. + */ +#define I915_FORMAT_MOD_4_TILED_MTL_MC_CCS fourcc_mod_code(INTEL, 14) + +/* + * Intel Color Control Surface with Clear Color (CCS) for display ver. 14 render + * compression. + * + * The main surface is tile4 and is at plane index 0 whereas CCS is linear + * and at index 1. The clear color is stored at index 2, and the pitch should + * be ignored. The clear color structure is 256 bits. The first 128 bits + * represents Raw Clear Color Red, Green, Blue and Alpha color each represented + * by 32 bits. The raw clear color is consumed by the 3d engine and generates + * the converted clear color of size 64 bits. The first 32 bits store the Lower + * Converted Clear Color value and the next 32 bits store the Higher Converted + * Clear Color value when applicable. The Converted Clear Color values are + * consumed by the DE. The last 64 bits are used to store Color Discard Enable + * and Depth Clear Value Valid which are ignored by the DE. A CCS cache line + * corresponds to an area of 4x1 tiles in the main surface. The main surface + * pitch is required to be a multiple of 4 tile widths. + */ +#define I915_FORMAT_MOD_4_TILED_MTL_RC_CCS_CC fourcc_mod_code(INTEL, 15) + +/* * Tiled, NV12MT, grouped in 64 (pixels) x 32 (lines) -sized macroblocks * * Macroblocks are laid in a Z-shape, and each pixel data is following the diff --git a/include/uapi/drm/drm_mode.h b/include/uapi/drm/drm_mode.h index 46becedf5b2f..ea1b639bcb28 100644 --- a/include/uapi/drm/drm_mode.h +++ b/include/uapi/drm/drm_mode.h @@ -488,6 +488,9 @@ struct drm_mode_get_connector { * This is not an object ID. This is a per-type connector number. Each * (type, type_id) combination is unique across all connectors of a DRM * device. + * + * The (type, type_id) combination is not a stable identifier: the + * type_id can change depending on the driver probe order. */ __u32 connector_type_id; @@ -834,6 +837,11 @@ struct drm_color_ctm { /* * Conversion matrix in S31.32 sign-magnitude * (not two's complement!) format. + * + * out matrix in + * |R| |0 1 2| |R| + * |G| = |3 4 5| x |G| + * |B| |6 7 8| |B| */ __u64 matrix[9]; }; @@ -878,7 +886,7 @@ struct hdr_metadata_infoframe { */ struct { __u16 x, y; - } display_primaries[3]; + } display_primaries[3]; /** * @white_point: White Point of Colorspace Data. * These are coded as unsigned 16-bit values in units of @@ -889,7 +897,7 @@ struct hdr_metadata_infoframe { */ struct { __u16 x, y; - } white_point; + } white_point; /** * @max_display_mastering_luminance: Max Mastering Display Luminance. * This value is coded as an unsigned 16-bit value in units of 1 cd/m2, diff --git a/include/uapi/drm/habanalabs_accel.h b/include/uapi/drm/habanalabs_accel.h index 331567ec9e79..e6436f3e8ea6 100644 --- a/include/uapi/drm/habanalabs_accel.h +++ b/include/uapi/drm/habanalabs_accel.h @@ -708,7 +708,8 @@ enum hl_server_type { HL_SERVER_GAUDI_HLS1H = 2, HL_SERVER_GAUDI_TYPE1 = 3, HL_SERVER_GAUDI_TYPE2 = 4, - HL_SERVER_GAUDI2_HLS2 = 5 + HL_SERVER_GAUDI2_HLS2 = 5, + HL_SERVER_GAUDI2_TYPE1 = 7 }; /* @@ -723,6 +724,10 @@ enum hl_server_type { * HL_NOTIFIER_EVENT_GENERAL_HW_ERR - Indicates device HW error * HL_NOTIFIER_EVENT_RAZWI - Indicates razwi happened * HL_NOTIFIER_EVENT_PAGE_FAULT - Indicates page fault happened + * HL_NOTIFIER_EVENT_CRITICAL_HW_ERR - Indicates a HW error that requires SW abort and + * HW reset + * HL_NOTIFIER_EVENT_CRITICAL_FW_ERR - Indicates a FW error that requires SW abort and + * HW reset */ #define HL_NOTIFIER_EVENT_TPC_ASSERT (1ULL << 0) #define HL_NOTIFIER_EVENT_UNDEFINED_OPCODE (1ULL << 1) @@ -733,6 +738,8 @@ enum hl_server_type { #define HL_NOTIFIER_EVENT_GENERAL_HW_ERR (1ULL << 6) #define HL_NOTIFIER_EVENT_RAZWI (1ULL << 7) #define HL_NOTIFIER_EVENT_PAGE_FAULT (1ULL << 8) +#define HL_NOTIFIER_EVENT_CRITICL_HW_ERR (1ULL << 9) +#define HL_NOTIFIER_EVENT_CRITICL_FW_ERR (1ULL << 10) /* Opcode for management ioctl * @@ -780,16 +787,28 @@ enum hl_server_type { * The address which accessing it caused the razwi. * Razwi initiator. * Razwi cause, was it a page fault or MMU access error. + * May return 0 even though no new data is available, in that case + * timestamp will be 0. * HL_INFO_DEV_MEM_ALLOC_PAGE_SIZES - Retrieve valid page sizes for device memory allocation * HL_INFO_SECURED_ATTESTATION - Retrieve attestation report of the boot. * HL_INFO_REGISTER_EVENTFD - Register eventfd for event notifications. * HL_INFO_UNREGISTER_EVENTFD - Unregister eventfd * HL_INFO_GET_EVENTS - Retrieve the last occurred events * HL_INFO_UNDEFINED_OPCODE_EVENT - Retrieve last undefined opcode error information. + * May return 0 even though no new data is available, in that case + * timestamp will be 0. * HL_INFO_ENGINE_STATUS - Retrieve the status of all the h/w engines in the asic. * HL_INFO_PAGE_FAULT_EVENT - Retrieve parameters of captured page fault. + * May return 0 even though no new data is available, in that case + * timestamp will be 0. * HL_INFO_USER_MAPPINGS - Retrieve user mappings, captured after page fault event. * HL_INFO_FW_GENERIC_REQ - Send generic request to FW. + * HL_INFO_HW_ERR_EVENT - Retrieve information on the reported HW error. + * May return 0 even though no new data is available, in that case + * timestamp will be 0. + * HL_INFO_FW_ERR_EVENT - Retrieve information on the reported FW error. + * May return 0 even though no new data is available, in that case + * timestamp will be 0. */ #define HL_INFO_HW_IP_INFO 0 #define HL_INFO_HW_EVENTS 1 @@ -824,6 +843,8 @@ enum hl_server_type { #define HL_INFO_PAGE_FAULT_EVENT 33 #define HL_INFO_USER_MAPPINGS 34 #define HL_INFO_FW_GENERIC_REQ 35 +#define HL_INFO_HW_ERR_EVENT 36 +#define HL_INFO_FW_ERR_EVENT 37 #define HL_INFO_VERSION_MAX_LEN 128 #define HL_INFO_CARD_NAME_MAX_LEN 16 @@ -875,6 +896,12 @@ enum hl_server_type { * application to use. Relevant for Gaudi2 and later. * @device_mem_alloc_default_page_size: default page size used in device memory allocation. * @revision_id: PCI revision ID of the ASIC. + * @tpc_interrupt_id: interrupt id for TPC to use in order to raise events towards the host. + * @rotator_enabled_mask: Bit-mask that represents which rotators are enabled. + * Relevant for Gaudi3 and later. + * @engine_core_interrupt_reg_addr: interrupt register address for engine core to use + * in order to raise events toward FW. + * @reserved_dram_size: DRAM size reserved for driver and firmware. */ struct hl_info_hw_ip_info { __u64 sram_base_address; @@ -902,15 +929,20 @@ struct hl_info_hw_ip_info { __u64 dram_page_size; __u32 edma_enabled_mask; __u16 number_of_user_interrupts; - __u16 pad2; - __u64 reserved4; + __u8 reserved1; + __u8 reserved2; + __u64 reserved3; __u64 device_mem_alloc_default_page_size; + __u64 reserved4; __u64 reserved5; - __u64 reserved6; - __u32 reserved7; - __u8 reserved8; + __u32 reserved6; + __u8 reserved7; __u8 revision_id; - __u8 pad[2]; + __u16 tpc_interrupt_id; + __u32 rotator_enabled_mask; + __u32 reserved9; + __u64 engine_core_interrupt_reg_addr; + __u64 reserved_dram_size; }; struct hl_info_dram_usage { @@ -1162,6 +1194,39 @@ struct hl_info_undefined_opcode_event { }; /** + * struct hl_info_hw_err_event - info about HW error + * @timestamp: timestamp of error occurrence + * @event_id: The async event ID (specific to each device type). + * @pad: size padding for u64 granularity. + */ +struct hl_info_hw_err_event { + __s64 timestamp; + __u16 event_id; + __u16 pad[3]; +}; + +/* FW error definition for event_type in struct hl_info_fw_err_event */ +enum hl_info_fw_err_type { + HL_INFO_FW_HEARTBEAT_ERR, + HL_INFO_FW_REPORTED_ERR, +}; + +/** + * struct hl_info_fw_err_event - info about FW error + * @timestamp: time-stamp of error occurrence + * @err_type: The type of event as defined in hl_info_fw_err_type. + * @event_id: The async event ID (specific to each device type, applicable only when event type is + * HL_INFO_FW_REPORTED_ERR). + * @pad: size padding for u64 granularity. + */ +struct hl_info_fw_err_event { + __s64 timestamp; + __u16 err_type; + __u16 event_id; + __u32 pad; +}; + +/** * struct hl_info_dev_memalloc_page_sizes - valid page sizes in device mem alloc information. * @page_order_bitmask: bitmap in which a set bit represents the order of the supported page size * (e.g. 0x2100000 means that 1MB and 32MB pages are supported). @@ -1486,17 +1551,31 @@ struct hl_cs_chunk { */ #define HL_CS_FLAGS_FLUSH_PCI_HBW_WRITES 0x8000 +/* + * The engines CS is merged into the existing CS ioctls. + * Use it to control engines modes. + */ +#define HL_CS_FLAGS_ENGINES_COMMAND 0x10000 + #define HL_CS_STATUS_SUCCESS 0 #define HL_MAX_JOBS_PER_CS 512 -/* HL_ENGINE_CORE_ values +/* + * enum hl_engine_command - engine command * - * HL_ENGINE_CORE_HALT: engine core halt - * HL_ENGINE_CORE_RUN: engine core run + * @HL_ENGINE_CORE_HALT: engine core halt + * @HL_ENGINE_CORE_RUN: engine core run + * @HL_ENGINE_STALL: user engine/s stall + * @HL_ENGINE_RESUME: user engine/s resume */ -#define HL_ENGINE_CORE_HALT (1 << 0) -#define HL_ENGINE_CORE_RUN (1 << 1) +enum hl_engine_command { + HL_ENGINE_CORE_HALT = 1, + HL_ENGINE_CORE_RUN = 2, + HL_ENGINE_STALL = 3, + HL_ENGINE_RESUME = 4, + HL_ENGINE_COMMAND_MAX +}; struct hl_cs_in { @@ -1520,6 +1599,18 @@ struct hl_cs_in { /* the core command to be sent towards engine cores */ __u32 core_command; }; + + /* Valid only when HL_CS_FLAGS_ENGINES_COMMAND is set */ + struct { + /* this holds address of array of uint32 for engines */ + __u64 engines; + + /* number of engines in engines array */ + __u32 num_engines; + + /* the engine command to be sent towards engines */ + __u32 engine_command; + }; }; union { diff --git a/include/uapi/drm/i915_drm.h b/include/uapi/drm/i915_drm.h index 8df261c5ab9b..7000e5910a1d 100644 --- a/include/uapi/drm/i915_drm.h +++ b/include/uapi/drm/i915_drm.h @@ -280,7 +280,16 @@ enum drm_i915_pmu_engine_sample { #define I915_PMU_ENGINE_SEMA(class, instance) \ __I915_PMU_ENGINE(class, instance, I915_SAMPLE_SEMA) -#define __I915_PMU_OTHER(x) (__I915_PMU_ENGINE(0xff, 0xff, 0xf) + 1 + (x)) +/* + * Top 4 bits of every non-engine counter are GT id. + */ +#define __I915_PMU_GT_SHIFT (60) + +#define ___I915_PMU_OTHER(gt, x) \ + (((__u64)__I915_PMU_ENGINE(0xff, 0xff, 0xf) + 1 + (x)) | \ + ((__u64)(gt) << __I915_PMU_GT_SHIFT)) + +#define __I915_PMU_OTHER(x) ___I915_PMU_OTHER(0, x) #define I915_PMU_ACTUAL_FREQUENCY __I915_PMU_OTHER(0) #define I915_PMU_REQUESTED_FREQUENCY __I915_PMU_OTHER(1) @@ -290,6 +299,12 @@ enum drm_i915_pmu_engine_sample { #define I915_PMU_LAST /* Deprecated - do not use */ I915_PMU_RC6_RESIDENCY +#define __I915_PMU_ACTUAL_FREQUENCY(gt) ___I915_PMU_OTHER(gt, 0) +#define __I915_PMU_REQUESTED_FREQUENCY(gt) ___I915_PMU_OTHER(gt, 1) +#define __I915_PMU_INTERRUPTS(gt) ___I915_PMU_OTHER(gt, 2) +#define __I915_PMU_RC6_RESIDENCY(gt) ___I915_PMU_OTHER(gt, 3) +#define __I915_PMU_SOFTWARE_GT_AWAKE_TIME(gt) ___I915_PMU_OTHER(gt, 4) + /* Each region is a minimum of 16k, and there are at most 255 of them. */ #define I915_NR_TEX_REGIONS 255 /* table size 2k - maximum due to use @@ -659,7 +674,8 @@ typedef struct drm_i915_irq_wait { * If the IOCTL is successful, the returned parameter will be set to one of the * following values: * * 0 if HuC firmware load is not complete, - * * 1 if HuC firmware is authenticated and running. + * * 1 if HuC firmware is loaded and fully authenticated, + * * 2 if HuC firmware is loaded and authenticated for clear media only */ #define I915_PARAM_HUC_STATUS 42 @@ -771,6 +787,25 @@ typedef struct drm_i915_irq_wait { */ #define I915_PARAM_OA_TIMESTAMP_FREQUENCY 57 +/* + * Query the status of PXP support in i915. + * + * The query can fail in the following scenarios with the listed error codes: + * -ENODEV = PXP support is not available on the GPU device or in the + * kernel due to missing component drivers or kernel configs. + * + * If the IOCTL is successful, the returned parameter will be set to one of + * the following values: + * 1 = PXP feature is supported and is ready for use. + * 2 = PXP feature is supported but should be ready soon (pending + * initialization of non-i915 system dependencies). + * + * NOTE: When param is supported (positive return values), user space should + * still refer to the GEM PXP context-creation UAPI header specs to be + * aware of possible failure due to system state machine at the time. + */ +#define I915_PARAM_PXP_STATUS 58 + /* Must be kept compact -- no holes and well documented */ /** @@ -2096,6 +2131,21 @@ struct drm_i915_gem_context_param { * * -ENODEV: feature not available * -EPERM: trying to mark a recoverable or not bannable context as protected + * -ENXIO: A dependency such as a component driver or firmware is not yet + * loaded so user space may need to attempt again. Depending on the + * device, this error may be reported if protected context creation is + * attempted very early after kernel start because the internal timeout + * waiting for such dependencies is not guaranteed to be larger than + * required (numbers differ depending on system and kernel config): + * - ADL/RPL: dependencies may take up to 3 seconds from kernel start + * while context creation internal timeout is 250 milisecs + * - MTL: dependencies may take up to 8 seconds from kernel start + * while context creation internal timeout is 250 milisecs + * NOTE: such dependencies happen once, so a subsequent call to create a + * protected context after a prior successful call will not experience + * such timeouts and will not return -ENXIO (unless the driver is reloaded, + * or, depending on the device, resumes from a suspended state). + * -EIO: The firmware did not succeed in creating the protected context. */ #define I915_CONTEXT_PARAM_PROTECTED_CONTENT 0xd /* Must be kept compact -- no holes and well documented */ @@ -2491,7 +2541,7 @@ struct i915_context_param_engines { #define I915_CONTEXT_ENGINES_EXT_LOAD_BALANCE 0 /* see i915_context_engines_load_balance */ #define I915_CONTEXT_ENGINES_EXT_BOND 1 /* see i915_context_engines_bond */ #define I915_CONTEXT_ENGINES_EXT_PARALLEL_SUBMIT 2 /* see i915_context_engines_parallel_submit */ - struct i915_engine_class_instance engines[0]; + struct i915_engine_class_instance engines[]; } __attribute__((packed)); #define I915_DEFINE_CONTEXT_PARAM_ENGINES(name__, N__) struct { \ @@ -2676,6 +2726,10 @@ enum drm_i915_oa_format { I915_OAR_FORMAT_A32u40_A4u32_B8_C8, I915_OA_FORMAT_A24u40_A14u32_B8_C8, + /* MTL OAM */ + I915_OAM_FORMAT_MPEC8u64_B8_C8, + I915_OAM_FORMAT_MPEC8u32_B8_C8, + I915_OA_FORMAT_MAX /* non-ABI */ }; @@ -2758,6 +2812,25 @@ enum drm_i915_perf_property_id { */ DRM_I915_PERF_PROP_POLL_OA_PERIOD, + /** + * Multiple engines may be mapped to the same OA unit. The OA unit is + * identified by class:instance of any engine mapped to it. + * + * This parameter specifies the engine class and must be passed along + * with DRM_I915_PERF_PROP_OA_ENGINE_INSTANCE. + * + * This property is available in perf revision 6. + */ + DRM_I915_PERF_PROP_OA_ENGINE_CLASS, + + /** + * This parameter specifies the engine instance and must be passed along + * with DRM_I915_PERF_PROP_OA_ENGINE_CLASS. + * + * This property is available in perf revision 6. + */ + DRM_I915_PERF_PROP_OA_ENGINE_INSTANCE, + DRM_I915_PERF_PROP_MAX /* non-ABI */ }; @@ -3607,9 +3680,13 @@ struct drm_i915_gem_create_ext { * * For I915_GEM_CREATE_EXT_PROTECTED_CONTENT usage see * struct drm_i915_gem_create_ext_protected_content. + * + * For I915_GEM_CREATE_EXT_SET_PAT usage see + * struct drm_i915_gem_create_ext_set_pat. */ #define I915_GEM_CREATE_EXT_MEMORY_REGIONS 0 #define I915_GEM_CREATE_EXT_PROTECTED_CONTENT 1 +#define I915_GEM_CREATE_EXT_SET_PAT 2 __u64 extensions; }; @@ -3724,6 +3801,43 @@ struct drm_i915_gem_create_ext_protected_content { __u32 flags; }; +/** + * struct drm_i915_gem_create_ext_set_pat - The + * I915_GEM_CREATE_EXT_SET_PAT extension. + * + * If this extension is provided, the specified caching policy (PAT index) is + * applied to the buffer object. + * + * Below is an example on how to create an object with specific caching policy: + * + * .. code-block:: C + * + * struct drm_i915_gem_create_ext_set_pat set_pat_ext = { + * .base = { .name = I915_GEM_CREATE_EXT_SET_PAT }, + * .pat_index = 0, + * }; + * struct drm_i915_gem_create_ext create_ext = { + * .size = PAGE_SIZE, + * .extensions = (uintptr_t)&set_pat_ext, + * }; + * + * int err = ioctl(fd, DRM_IOCTL_I915_GEM_CREATE_EXT, &create_ext); + * if (err) ... + */ +struct drm_i915_gem_create_ext_set_pat { + /** @base: Extension link. See struct i915_user_extension. */ + struct i915_user_extension base; + /** + * @pat_index: PAT index to be set + * PAT index is a bit field in Page Table Entry to control caching + * behaviors for GPU accesses. The definition of PAT index is + * platform dependent and can be found in hardware specifications, + */ + __u32 pat_index; + /** @rsvd: reserved for future use */ + __u32 rsvd; +}; + /* ID of the protected content session managed by i915 when PXP is active */ #define I915_PROTECTED_CONTENT_DEFAULT_SESSION 0xf diff --git a/include/uapi/drm/ivpu_accel.h b/include/uapi/drm/ivpu_accel.h index 839820aed87e..a58a14c9f222 100644 --- a/include/uapi/drm/ivpu_accel.h +++ b/include/uapi/drm/ivpu_accel.h @@ -60,6 +60,7 @@ extern "C" { #define DRM_IVPU_PARAM_UNIQUE_INFERENCE_ID 10 #define DRM_IVPU_PARAM_TILE_CONFIG 11 #define DRM_IVPU_PARAM_SKU 12 +#define DRM_IVPU_PARAM_CAPABILITIES 13 #define DRM_IVPU_PLATFORM_TYPE_SILICON 0 @@ -68,6 +69,9 @@ extern "C" { #define DRM_IVPU_CONTEXT_PRIORITY_FOCUS 2 #define DRM_IVPU_CONTEXT_PRIORITY_REALTIME 3 +#define DRM_IVPU_CAP_METRIC_STREAMER 1 +#define DRM_IVPU_CAP_DMA_MEMORY_RANGE 2 + /** * struct drm_ivpu_param - Get/Set VPU parameters */ @@ -129,8 +133,10 @@ struct drm_ivpu_param { __u64 value; }; -#define DRM_IVPU_BO_HIGH_MEM 0x00000001 +#define DRM_IVPU_BO_SHAVE_MEM 0x00000001 +#define DRM_IVPU_BO_HIGH_MEM DRM_IVPU_BO_SHAVE_MEM #define DRM_IVPU_BO_MAPPABLE 0x00000002 +#define DRM_IVPU_BO_DMA_MEM 0x00000004 #define DRM_IVPU_BO_CACHED 0x00000000 #define DRM_IVPU_BO_UNCACHED 0x00010000 @@ -140,6 +146,7 @@ struct drm_ivpu_param { #define DRM_IVPU_BO_FLAGS \ (DRM_IVPU_BO_HIGH_MEM | \ DRM_IVPU_BO_MAPPABLE | \ + DRM_IVPU_BO_DMA_MEM | \ DRM_IVPU_BO_CACHE_MASK) /** diff --git a/include/uapi/drm/msm_drm.h b/include/uapi/drm/msm_drm.h index 329100016e7c..6c34272a13fd 100644 --- a/include/uapi/drm/msm_drm.h +++ b/include/uapi/drm/msm_drm.h @@ -151,8 +151,13 @@ struct drm_msm_gem_info { #define MSM_PREP_READ 0x01 #define MSM_PREP_WRITE 0x02 #define MSM_PREP_NOSYNC 0x04 +#define MSM_PREP_BOOST 0x08 -#define MSM_PREP_FLAGS (MSM_PREP_READ | MSM_PREP_WRITE | MSM_PREP_NOSYNC) +#define MSM_PREP_FLAGS (MSM_PREP_READ | \ + MSM_PREP_WRITE | \ + MSM_PREP_NOSYNC | \ + MSM_PREP_BOOST | \ + 0) struct drm_msm_gem_cpu_prep { __u32 handle; /* in */ @@ -181,7 +186,11 @@ struct drm_msm_gem_cpu_fini { */ struct drm_msm_gem_submit_reloc { __u32 submit_offset; /* in, offset from submit_bo */ +#ifdef __cplusplus + __u32 _or; /* in, value OR'd with result */ +#else __u32 or; /* in, value OR'd with result */ +#endif __s32 shift; /* in, amount of left shift (can be negative) */ __u32 reloc_idx; /* in, index of reloc_bo buffer */ __u64 reloc_offset; /* in, offset from start of reloc_bo */ @@ -286,6 +295,11 @@ struct drm_msm_gem_submit { }; +#define MSM_WAIT_FENCE_BOOST 0x00000001 +#define MSM_WAIT_FENCE_FLAGS ( \ + MSM_WAIT_FENCE_BOOST | \ + 0) + /* The normal way to synchronize with the GPU is just to CPU_PREP on * a buffer if you need to access it from the CPU (other cmdstream * submission from same or other contexts, PAGE_FLIP ioctl, etc, all @@ -295,7 +309,7 @@ struct drm_msm_gem_submit { */ struct drm_msm_wait_fence { __u32 fence; /* in */ - __u32 pad; + __u32 flags; /* in, bitmask of MSM_WAIT_FENCE_x */ struct drm_msm_timespec timeout; /* in */ __u32 queueid; /* in, submitqueue id */ }; diff --git a/include/uapi/drm/nouveau_drm.h b/include/uapi/drm/nouveau_drm.h index 853a327433d3..8d7402c13e56 100644 --- a/include/uapi/drm/nouveau_drm.h +++ b/include/uapi/drm/nouveau_drm.h @@ -33,11 +33,51 @@ extern "C" { #endif +#define NOUVEAU_GETPARAM_PCI_VENDOR 3 +#define NOUVEAU_GETPARAM_PCI_DEVICE 4 +#define NOUVEAU_GETPARAM_BUS_TYPE 5 +#define NOUVEAU_GETPARAM_FB_SIZE 8 +#define NOUVEAU_GETPARAM_AGP_SIZE 9 +#define NOUVEAU_GETPARAM_CHIPSET_ID 11 +#define NOUVEAU_GETPARAM_VM_VRAM_BASE 12 +#define NOUVEAU_GETPARAM_GRAPH_UNITS 13 +#define NOUVEAU_GETPARAM_PTIMER_TIME 14 +#define NOUVEAU_GETPARAM_HAS_BO_USAGE 15 +#define NOUVEAU_GETPARAM_HAS_PAGEFLIP 16 +struct drm_nouveau_getparam { + __u64 param; + __u64 value; +}; + +struct drm_nouveau_channel_alloc { + __u32 fb_ctxdma_handle; + __u32 tt_ctxdma_handle; + + __s32 channel; + __u32 pushbuf_domains; + + /* Notifier memory */ + __u32 notifier_handle; + + /* DRM-enforced subchannel assignments */ + struct { + __u32 handle; + __u32 grclass; + } subchan[8]; + __u32 nr_subchan; +}; + +struct drm_nouveau_channel_free { + __s32 channel; +}; + #define NOUVEAU_GEM_DOMAIN_CPU (1 << 0) #define NOUVEAU_GEM_DOMAIN_VRAM (1 << 1) #define NOUVEAU_GEM_DOMAIN_GART (1 << 2) #define NOUVEAU_GEM_DOMAIN_MAPPABLE (1 << 3) #define NOUVEAU_GEM_DOMAIN_COHERENT (1 << 4) +/* The BO will never be shared via import or export. */ +#define NOUVEAU_GEM_DOMAIN_NO_SHARE (1 << 5) #define NOUVEAU_GEM_TILE_COMP 0x00030000 /* nv50-only */ #define NOUVEAU_GEM_TILE_LAYOUT_MASK 0x0000ff00 @@ -98,6 +138,7 @@ struct drm_nouveau_gem_pushbuf_push { __u32 pad; __u64 offset; __u64 length; +#define NOUVEAU_GEM_PUSHBUF_NO_PREFETCH (1 << 23) }; struct drm_nouveau_gem_pushbuf { @@ -126,16 +167,233 @@ struct drm_nouveau_gem_cpu_fini { __u32 handle; }; -#define DRM_NOUVEAU_GETPARAM 0x00 /* deprecated */ +/** + * struct drm_nouveau_sync - sync object + * + * This structure serves as synchronization mechanism for (potentially) + * asynchronous operations such as EXEC or VM_BIND. + */ +struct drm_nouveau_sync { + /** + * @flags: the flags for a sync object + * + * The first 8 bits are used to determine the type of the sync object. + */ + __u32 flags; +#define DRM_NOUVEAU_SYNC_SYNCOBJ 0x0 +#define DRM_NOUVEAU_SYNC_TIMELINE_SYNCOBJ 0x1 +#define DRM_NOUVEAU_SYNC_TYPE_MASK 0xf + /** + * @handle: the handle of the sync object + */ + __u32 handle; + /** + * @timeline_value: + * + * The timeline point of the sync object in case the syncobj is of + * type DRM_NOUVEAU_SYNC_TIMELINE_SYNCOBJ. + */ + __u64 timeline_value; +}; + +/** + * struct drm_nouveau_vm_init - GPU VA space init structure + * + * Used to initialize the GPU's VA space for a user client, telling the kernel + * which portion of the VA space is managed by the UMD and kernel respectively. + * + * For the UMD to use the VM_BIND uAPI, this must be called before any BOs or + * channels are created; if called afterwards DRM_IOCTL_NOUVEAU_VM_INIT fails + * with -ENOSYS. + */ +struct drm_nouveau_vm_init { + /** + * @kernel_managed_addr: start address of the kernel managed VA space + * region + */ + __u64 kernel_managed_addr; + /** + * @kernel_managed_size: size of the kernel managed VA space region in + * bytes + */ + __u64 kernel_managed_size; +}; + +/** + * struct drm_nouveau_vm_bind_op - VM_BIND operation + * + * This structure represents a single VM_BIND operation. UMDs should pass + * an array of this structure via struct drm_nouveau_vm_bind's &op_ptr field. + */ +struct drm_nouveau_vm_bind_op { + /** + * @op: the operation type + */ + __u32 op; +/** + * @DRM_NOUVEAU_VM_BIND_OP_MAP: + * + * Map a GEM object to the GPU's VA space. Optionally, the + * &DRM_NOUVEAU_VM_BIND_SPARSE flag can be passed to instruct the kernel to + * create sparse mappings for the given range. + */ +#define DRM_NOUVEAU_VM_BIND_OP_MAP 0x0 +/** + * @DRM_NOUVEAU_VM_BIND_OP_UNMAP: + * + * Unmap an existing mapping in the GPU's VA space. If the region the mapping + * is located in is a sparse region, new sparse mappings are created where the + * unmapped (memory backed) mapping was mapped previously. To remove a sparse + * region the &DRM_NOUVEAU_VM_BIND_SPARSE must be set. + */ +#define DRM_NOUVEAU_VM_BIND_OP_UNMAP 0x1 + /** + * @flags: the flags for a &drm_nouveau_vm_bind_op + */ + __u32 flags; +/** + * @DRM_NOUVEAU_VM_BIND_SPARSE: + * + * Indicates that an allocated VA space region should be sparse. + */ +#define DRM_NOUVEAU_VM_BIND_SPARSE (1 << 8) + /** + * @handle: the handle of the DRM GEM object to map + */ + __u32 handle; + /** + * @pad: 32 bit padding, should be 0 + */ + __u32 pad; + /** + * @addr: + * + * the address the VA space region or (memory backed) mapping should be mapped to + */ + __u64 addr; + /** + * @bo_offset: the offset within the BO backing the mapping + */ + __u64 bo_offset; + /** + * @range: the size of the requested mapping in bytes + */ + __u64 range; +}; + +/** + * struct drm_nouveau_vm_bind - structure for DRM_IOCTL_NOUVEAU_VM_BIND + */ +struct drm_nouveau_vm_bind { + /** + * @op_count: the number of &drm_nouveau_vm_bind_op + */ + __u32 op_count; + /** + * @flags: the flags for a &drm_nouveau_vm_bind ioctl + */ + __u32 flags; +/** + * @DRM_NOUVEAU_VM_BIND_RUN_ASYNC: + * + * Indicates that the given VM_BIND operation should be executed asynchronously + * by the kernel. + * + * If this flag is not supplied the kernel executes the associated operations + * synchronously and doesn't accept any &drm_nouveau_sync objects. + */ +#define DRM_NOUVEAU_VM_BIND_RUN_ASYNC 0x1 + /** + * @wait_count: the number of wait &drm_nouveau_syncs + */ + __u32 wait_count; + /** + * @sig_count: the number of &drm_nouveau_syncs to signal when finished + */ + __u32 sig_count; + /** + * @wait_ptr: pointer to &drm_nouveau_syncs to wait for + */ + __u64 wait_ptr; + /** + * @sig_ptr: pointer to &drm_nouveau_syncs to signal when finished + */ + __u64 sig_ptr; + /** + * @op_ptr: pointer to the &drm_nouveau_vm_bind_ops to execute + */ + __u64 op_ptr; +}; + +/** + * struct drm_nouveau_exec_push - EXEC push operation + * + * This structure represents a single EXEC push operation. UMDs should pass an + * array of this structure via struct drm_nouveau_exec's &push_ptr field. + */ +struct drm_nouveau_exec_push { + /** + * @va: the virtual address of the push buffer mapping + */ + __u64 va; + /** + * @va_len: the length of the push buffer mapping + */ + __u32 va_len; + /** + * @flags: the flags for this push buffer mapping + */ + __u32 flags; +#define DRM_NOUVEAU_EXEC_PUSH_NO_PREFETCH 0x1 +}; + +/** + * struct drm_nouveau_exec - structure for DRM_IOCTL_NOUVEAU_EXEC + */ +struct drm_nouveau_exec { + /** + * @channel: the channel to execute the push buffer in + */ + __u32 channel; + /** + * @push_count: the number of &drm_nouveau_exec_push ops + */ + __u32 push_count; + /** + * @wait_count: the number of wait &drm_nouveau_syncs + */ + __u32 wait_count; + /** + * @sig_count: the number of &drm_nouveau_syncs to signal when finished + */ + __u32 sig_count; + /** + * @wait_ptr: pointer to &drm_nouveau_syncs to wait for + */ + __u64 wait_ptr; + /** + * @sig_ptr: pointer to &drm_nouveau_syncs to signal when finished + */ + __u64 sig_ptr; + /** + * @push_ptr: pointer to &drm_nouveau_exec_push ops + */ + __u64 push_ptr; +}; + +#define DRM_NOUVEAU_GETPARAM 0x00 #define DRM_NOUVEAU_SETPARAM 0x01 /* deprecated */ -#define DRM_NOUVEAU_CHANNEL_ALLOC 0x02 /* deprecated */ -#define DRM_NOUVEAU_CHANNEL_FREE 0x03 /* deprecated */ +#define DRM_NOUVEAU_CHANNEL_ALLOC 0x02 +#define DRM_NOUVEAU_CHANNEL_FREE 0x03 #define DRM_NOUVEAU_GROBJ_ALLOC 0x04 /* deprecated */ #define DRM_NOUVEAU_NOTIFIEROBJ_ALLOC 0x05 /* deprecated */ #define DRM_NOUVEAU_GPUOBJ_FREE 0x06 /* deprecated */ #define DRM_NOUVEAU_NVIF 0x07 #define DRM_NOUVEAU_SVM_INIT 0x08 #define DRM_NOUVEAU_SVM_BIND 0x09 +#define DRM_NOUVEAU_VM_INIT 0x10 +#define DRM_NOUVEAU_VM_BIND 0x11 +#define DRM_NOUVEAU_EXEC 0x12 #define DRM_NOUVEAU_GEM_NEW 0x40 #define DRM_NOUVEAU_GEM_PUSHBUF 0x41 #define DRM_NOUVEAU_GEM_CPU_PREP 0x42 @@ -188,6 +446,10 @@ struct drm_nouveau_svm_bind { #define NOUVEAU_SVM_BIND_TARGET__GPU_VRAM (1UL << 31) +#define DRM_IOCTL_NOUVEAU_GETPARAM DRM_IOWR(DRM_COMMAND_BASE + DRM_NOUVEAU_GETPARAM, struct drm_nouveau_getparam) +#define DRM_IOCTL_NOUVEAU_CHANNEL_ALLOC DRM_IOWR(DRM_COMMAND_BASE + DRM_NOUVEAU_CHANNEL_ALLOC, struct drm_nouveau_channel_alloc) +#define DRM_IOCTL_NOUVEAU_CHANNEL_FREE DRM_IOW (DRM_COMMAND_BASE + DRM_NOUVEAU_CHANNEL_FREE, struct drm_nouveau_channel_free) + #define DRM_IOCTL_NOUVEAU_SVM_INIT DRM_IOWR(DRM_COMMAND_BASE + DRM_NOUVEAU_SVM_INIT, struct drm_nouveau_svm_init) #define DRM_IOCTL_NOUVEAU_SVM_BIND DRM_IOWR(DRM_COMMAND_BASE + DRM_NOUVEAU_SVM_BIND, struct drm_nouveau_svm_bind) @@ -197,6 +459,9 @@ struct drm_nouveau_svm_bind { #define DRM_IOCTL_NOUVEAU_GEM_CPU_FINI DRM_IOW (DRM_COMMAND_BASE + DRM_NOUVEAU_GEM_CPU_FINI, struct drm_nouveau_gem_cpu_fini) #define DRM_IOCTL_NOUVEAU_GEM_INFO DRM_IOWR(DRM_COMMAND_BASE + DRM_NOUVEAU_GEM_INFO, struct drm_nouveau_gem_info) +#define DRM_IOCTL_NOUVEAU_VM_INIT DRM_IOWR(DRM_COMMAND_BASE + DRM_NOUVEAU_VM_INIT, struct drm_nouveau_vm_init) +#define DRM_IOCTL_NOUVEAU_VM_BIND DRM_IOWR(DRM_COMMAND_BASE + DRM_NOUVEAU_VM_BIND, struct drm_nouveau_vm_bind) +#define DRM_IOCTL_NOUVEAU_EXEC DRM_IOWR(DRM_COMMAND_BASE + DRM_NOUVEAU_EXEC, struct drm_nouveau_exec) #if defined(__cplusplus) } #endif diff --git a/include/uapi/drm/qaic_accel.h b/include/uapi/drm/qaic_accel.h new file mode 100644 index 000000000000..2d348744a853 --- /dev/null +++ b/include/uapi/drm/qaic_accel.h @@ -0,0 +1,397 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note + * + * Copyright (c) 2019-2020, The Linux Foundation. All rights reserved. + * Copyright (c) 2021-2023 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +#ifndef QAIC_ACCEL_H_ +#define QAIC_ACCEL_H_ + +#include "drm.h" + +#if defined(__cplusplus) +extern "C" { +#endif + +/* The length(4K) includes len and count fields of qaic_manage_msg */ +#define QAIC_MANAGE_MAX_MSG_LENGTH SZ_4K + +/* semaphore flags */ +#define QAIC_SEM_INSYNCFENCE 2 +#define QAIC_SEM_OUTSYNCFENCE 1 + +/* Semaphore commands */ +#define QAIC_SEM_NOP 0 +#define QAIC_SEM_INIT 1 +#define QAIC_SEM_INC 2 +#define QAIC_SEM_DEC 3 +#define QAIC_SEM_WAIT_EQUAL 4 +#define QAIC_SEM_WAIT_GT_EQ 5 /* Greater than or equal */ +#define QAIC_SEM_WAIT_GT_0 6 /* Greater than 0 */ + +#define QAIC_TRANS_UNDEFINED 0 +#define QAIC_TRANS_PASSTHROUGH_FROM_USR 1 +#define QAIC_TRANS_PASSTHROUGH_TO_USR 2 +#define QAIC_TRANS_PASSTHROUGH_FROM_DEV 3 +#define QAIC_TRANS_PASSTHROUGH_TO_DEV 4 +#define QAIC_TRANS_DMA_XFER_FROM_USR 5 +#define QAIC_TRANS_DMA_XFER_TO_DEV 6 +#define QAIC_TRANS_ACTIVATE_FROM_USR 7 +#define QAIC_TRANS_ACTIVATE_FROM_DEV 8 +#define QAIC_TRANS_ACTIVATE_TO_DEV 9 +#define QAIC_TRANS_DEACTIVATE_FROM_USR 10 +#define QAIC_TRANS_DEACTIVATE_FROM_DEV 11 +#define QAIC_TRANS_STATUS_FROM_USR 12 +#define QAIC_TRANS_STATUS_TO_USR 13 +#define QAIC_TRANS_STATUS_FROM_DEV 14 +#define QAIC_TRANS_STATUS_TO_DEV 15 +#define QAIC_TRANS_TERMINATE_FROM_DEV 16 +#define QAIC_TRANS_TERMINATE_TO_DEV 17 +#define QAIC_TRANS_DMA_XFER_CONT 18 +#define QAIC_TRANS_VALIDATE_PARTITION_FROM_DEV 19 +#define QAIC_TRANS_VALIDATE_PARTITION_TO_DEV 20 + +/** + * struct qaic_manage_trans_hdr - Header for a transaction in a manage message. + * @type: In. Identifies this transaction. See QAIC_TRANS_* defines. + * @len: In. Length of this transaction, including this header. + */ +struct qaic_manage_trans_hdr { + __u32 type; + __u32 len; +}; + +/** + * struct qaic_manage_trans_passthrough - Defines a passthrough transaction. + * @hdr: In. Header to identify this transaction. + * @data: In. Payload of this ransaction. Opaque to the driver. Userspace must + * encode in little endian and align/pad to 64-bit. + */ +struct qaic_manage_trans_passthrough { + struct qaic_manage_trans_hdr hdr; + __u8 data[]; +}; + +/** + * struct qaic_manage_trans_dma_xfer - Defines a DMA transfer transaction. + * @hdr: In. Header to identify this transaction. + * @tag: In. Identified this transfer in other transactions. Opaque to the + * driver. + * @pad: Structure padding. + * @addr: In. Address of the data to DMA to the device. + * @size: In. Length of the data to DMA to the device. + */ +struct qaic_manage_trans_dma_xfer { + struct qaic_manage_trans_hdr hdr; + __u32 tag; + __u32 pad; + __u64 addr; + __u64 size; +}; + +/** + * struct qaic_manage_trans_activate_to_dev - Defines an activate request. + * @hdr: In. Header to identify this transaction. + * @queue_size: In. Number of elements for DBC request and response queues. + * @eventfd: Unused. + * @options: In. Device specific options for this activate. + * @pad: Structure padding. Must be 0. + */ +struct qaic_manage_trans_activate_to_dev { + struct qaic_manage_trans_hdr hdr; + __u32 queue_size; + __u32 eventfd; + __u32 options; + __u32 pad; +}; + +/** + * struct qaic_manage_trans_activate_from_dev - Defines an activate response. + * @hdr: Out. Header to identify this transaction. + * @status: Out. Return code of the request from the device. + * @dbc_id: Out. Id of the assigned DBC for successful request. + * @options: Out. Device specific options for this activate. + */ +struct qaic_manage_trans_activate_from_dev { + struct qaic_manage_trans_hdr hdr; + __u32 status; + __u32 dbc_id; + __u64 options; +}; + +/** + * struct qaic_manage_trans_deactivate - Defines a deactivate request. + * @hdr: In. Header to identify this transaction. + * @dbc_id: In. Id of assigned DBC. + * @pad: Structure padding. Must be 0. + */ +struct qaic_manage_trans_deactivate { + struct qaic_manage_trans_hdr hdr; + __u32 dbc_id; + __u32 pad; +}; + +/** + * struct qaic_manage_trans_status_to_dev - Defines a status request. + * @hdr: In. Header to identify this transaction. + */ +struct qaic_manage_trans_status_to_dev { + struct qaic_manage_trans_hdr hdr; +}; + +/** + * struct qaic_manage_trans_status_from_dev - Defines a status response. + * @hdr: Out. Header to identify this transaction. + * @major: Out. NNC protocol version major number. + * @minor: Out. NNC protocol version minor number. + * @status: Out. Return code from device. + * @status_flags: Out. Flags from device. Bit 0 indicates if CRCs are required. + */ +struct qaic_manage_trans_status_from_dev { + struct qaic_manage_trans_hdr hdr; + __u16 major; + __u16 minor; + __u32 status; + __u64 status_flags; +}; + +/** + * struct qaic_manage_msg - Defines a message to the device. + * @len: In. Length of all the transactions contained within this message. + * @count: In. Number of transactions in this message. + * @data: In. Address to an array where the transactions can be found. + */ +struct qaic_manage_msg { + __u32 len; + __u32 count; + __u64 data; +}; + +/** + * struct qaic_create_bo - Defines a request to create a buffer object. + * @size: In. Size of the buffer in bytes. + * @handle: Out. GEM handle for the BO. + * @pad: Structure padding. Must be 0. + */ +struct qaic_create_bo { + __u64 size; + __u32 handle; + __u32 pad; +}; + +/** + * struct qaic_mmap_bo - Defines a request to prepare a BO for mmap(). + * @handle: In. Handle of the GEM BO to prepare for mmap(). + * @pad: Structure padding. Must be 0. + * @offset: Out. Offset value to provide to mmap(). + */ +struct qaic_mmap_bo { + __u32 handle; + __u32 pad; + __u64 offset; +}; + +/** + * struct qaic_sem - Defines a semaphore command for a BO slice. + * @val: In. Only lower 12 bits are valid. + * @index: In. Only lower 5 bits are valid. + * @presync: In. 1 if presync operation, 0 if postsync. + * @cmd: In. One of QAIC_SEM_*. + * @flags: In. Bitfield. See QAIC_SEM_INSYNCFENCE and QAIC_SEM_OUTSYNCFENCE + * @pad: Structure padding. Must be 0. + */ +struct qaic_sem { + __u16 val; + __u8 index; + __u8 presync; + __u8 cmd; + __u8 flags; + __u16 pad; +}; + +/** + * struct qaic_attach_slice_entry - Defines a single BO slice. + * @size: In. Size of this slice in bytes. + * @sem0: In. Semaphore command 0. Must be 0 is not valid. + * @sem1: In. Semaphore command 1. Must be 0 is not valid. + * @sem2: In. Semaphore command 2. Must be 0 is not valid. + * @sem3: In. Semaphore command 3. Must be 0 is not valid. + * @dev_addr: In. Device address this slice pushes to or pulls from. + * @db_addr: In. Address of the doorbell to ring. + * @db_data: In. Data to write to the doorbell. + * @db_len: In. Size of the doorbell data in bits - 32, 16, or 8. 0 is for + * inactive doorbells. + * @offset: In. Start of this slice as an offset from the start of the BO. + */ +struct qaic_attach_slice_entry { + __u64 size; + struct qaic_sem sem0; + struct qaic_sem sem1; + struct qaic_sem sem2; + struct qaic_sem sem3; + __u64 dev_addr; + __u64 db_addr; + __u32 db_data; + __u32 db_len; + __u64 offset; +}; + +/** + * struct qaic_attach_slice_hdr - Defines metadata for a set of BO slices. + * @count: In. Number of slices for this BO. + * @dbc_id: In. Associate the sliced BO with this DBC. + * @handle: In. GEM handle of the BO to slice. + * @dir: In. Direction of data flow. 1 = DMA_TO_DEVICE, 2 = DMA_FROM_DEVICE + * @size: In. Total length of the BO. + * If BO is imported (DMABUF/PRIME) then this size + * should not exceed the size of DMABUF provided. + * If BO is allocated using DRM_IOCTL_QAIC_CREATE_BO + * then this size should be exactly same as the size + * provided during DRM_IOCTL_QAIC_CREATE_BO. + * @dev_addr: In. Device address this slice pushes to or pulls from. + * @db_addr: In. Address of the doorbell to ring. + * @db_data: In. Data to write to the doorbell. + * @db_len: In. Size of the doorbell data in bits - 32, 16, or 8. 0 is for + * inactive doorbells. + * @offset: In. Start of this slice as an offset from the start of the BO. + */ +struct qaic_attach_slice_hdr { + __u32 count; + __u32 dbc_id; + __u32 handle; + __u32 dir; + __u64 size; +}; + +/** + * struct qaic_attach_slice - Defines a set of BO slices. + * @hdr: In. Metadata of the set of slices. + * @data: In. Pointer to an array containing the slice definitions. + */ +struct qaic_attach_slice { + struct qaic_attach_slice_hdr hdr; + __u64 data; +}; + +/** + * struct qaic_execute_entry - Defines a BO to submit to the device. + * @handle: In. GEM handle of the BO to commit to the device. + * @dir: In. Direction of data. 1 = to device, 2 = from device. + */ +struct qaic_execute_entry { + __u32 handle; + __u32 dir; +}; + +/** + * struct qaic_partial_execute_entry - Defines a BO to resize and submit. + * @handle: In. GEM handle of the BO to commit to the device. + * @dir: In. Direction of data. 1 = to device, 2 = from device. + * @resize: In. New size of the BO. Must be <= the original BO size. 0 is + * short for no resize. + */ +struct qaic_partial_execute_entry { + __u32 handle; + __u32 dir; + __u64 resize; +}; + +/** + * struct qaic_execute_hdr - Defines metadata for BO submission. + * @count: In. Number of BOs to submit. + * @dbc_id: In. DBC to submit the BOs on. + */ +struct qaic_execute_hdr { + __u32 count; + __u32 dbc_id; +}; + +/** + * struct qaic_execute - Defines a list of BOs to submit to the device. + * @hdr: In. BO list metadata. + * @data: In. Pointer to an array of BOs to submit. + */ +struct qaic_execute { + struct qaic_execute_hdr hdr; + __u64 data; +}; + +/** + * struct qaic_wait - Defines a blocking wait for BO execution. + * @handle: In. GEM handle of the BO to wait on. + * @timeout: In. Maximum time in ms to wait for the BO. + * @dbc_id: In. DBC the BO is submitted to. + * @pad: Structure padding. Must be 0. + */ +struct qaic_wait { + __u32 handle; + __u32 timeout; + __u32 dbc_id; + __u32 pad; +}; + +/** + * struct qaic_perf_stats_hdr - Defines metadata for getting BO perf info. + * @count: In. Number of BOs requested. + * @pad: Structure padding. Must be 0. + * @dbc_id: In. DBC the BO are associated with. + */ +struct qaic_perf_stats_hdr { + __u16 count; + __u16 pad; + __u32 dbc_id; +}; + +/** + * struct qaic_perf_stats - Defines a request for getting BO perf info. + * @hdr: In. Request metadata + * @data: In. Pointer to array of stats structures that will receive the data. + */ +struct qaic_perf_stats { + struct qaic_perf_stats_hdr hdr; + __u64 data; +}; + +/** + * struct qaic_perf_stats_entry - Defines a BO perf info. + * @handle: In. GEM handle of the BO to get perf stats for. + * @queue_level_before: Out. Number of elements in the queue before this BO + * was submitted. + * @num_queue_element: Out. Number of elements added to the queue to submit + * this BO. + * @submit_latency_us: Out. Time taken by the driver to submit this BO. + * @device_latency_us: Out. Time taken by the device to execute this BO. + * @pad: Structure padding. Must be 0. + */ +struct qaic_perf_stats_entry { + __u32 handle; + __u32 queue_level_before; + __u32 num_queue_element; + __u32 submit_latency_us; + __u32 device_latency_us; + __u32 pad; +}; + +#define DRM_QAIC_MANAGE 0x00 +#define DRM_QAIC_CREATE_BO 0x01 +#define DRM_QAIC_MMAP_BO 0x02 +#define DRM_QAIC_ATTACH_SLICE_BO 0x03 +#define DRM_QAIC_EXECUTE_BO 0x04 +#define DRM_QAIC_PARTIAL_EXECUTE_BO 0x05 +#define DRM_QAIC_WAIT_BO 0x06 +#define DRM_QAIC_PERF_STATS_BO 0x07 + +#define DRM_IOCTL_QAIC_MANAGE DRM_IOWR(DRM_COMMAND_BASE + DRM_QAIC_MANAGE, struct qaic_manage_msg) +#define DRM_IOCTL_QAIC_CREATE_BO DRM_IOWR(DRM_COMMAND_BASE + DRM_QAIC_CREATE_BO, struct qaic_create_bo) +#define DRM_IOCTL_QAIC_MMAP_BO DRM_IOWR(DRM_COMMAND_BASE + DRM_QAIC_MMAP_BO, struct qaic_mmap_bo) +#define DRM_IOCTL_QAIC_ATTACH_SLICE_BO DRM_IOW(DRM_COMMAND_BASE + DRM_QAIC_ATTACH_SLICE_BO, struct qaic_attach_slice) +#define DRM_IOCTL_QAIC_EXECUTE_BO DRM_IOW(DRM_COMMAND_BASE + DRM_QAIC_EXECUTE_BO, struct qaic_execute) +#define DRM_IOCTL_QAIC_PARTIAL_EXECUTE_BO DRM_IOW(DRM_COMMAND_BASE + DRM_QAIC_PARTIAL_EXECUTE_BO, struct qaic_execute) +#define DRM_IOCTL_QAIC_WAIT_BO DRM_IOW(DRM_COMMAND_BASE + DRM_QAIC_WAIT_BO, struct qaic_wait) +#define DRM_IOCTL_QAIC_PERF_STATS_BO DRM_IOWR(DRM_COMMAND_BASE + DRM_QAIC_PERF_STATS_BO, struct qaic_perf_stats) + +#if defined(__cplusplus) +} +#endif + +#endif /* QAIC_ACCEL_H_ */ diff --git a/include/uapi/drm/virtgpu_drm.h b/include/uapi/drm/virtgpu_drm.h index 7b158fcb02b4..b1d0e56565bc 100644 --- a/include/uapi/drm/virtgpu_drm.h +++ b/include/uapi/drm/virtgpu_drm.h @@ -64,6 +64,16 @@ struct drm_virtgpu_map { __u32 pad; }; +#define VIRTGPU_EXECBUF_SYNCOBJ_RESET 0x01 +#define VIRTGPU_EXECBUF_SYNCOBJ_FLAGS ( \ + VIRTGPU_EXECBUF_SYNCOBJ_RESET | \ + 0) +struct drm_virtgpu_execbuffer_syncobj { + __u32 handle; + __u32 flags; + __u64 point; +}; + /* fence_fd is modified on success if VIRTGPU_EXECBUF_FENCE_FD_OUT flag is set. */ struct drm_virtgpu_execbuffer { __u32 flags; @@ -73,7 +83,11 @@ struct drm_virtgpu_execbuffer { __u32 num_bo_handles; __s32 fence_fd; /* in/out fence fd (see VIRTGPU_EXECBUF_FENCE_FD_IN/OUT) */ __u32 ring_idx; /* command ring index (see VIRTGPU_EXECBUF_RING_IDX) */ - __u32 pad; + __u32 syncobj_stride; /* size of @drm_virtgpu_execbuffer_syncobj */ + __u32 num_in_syncobjs; + __u32 num_out_syncobjs; + __u64 in_syncobjs; + __u64 out_syncobjs; }; #define VIRTGPU_PARAM_3D_FEATURES 1 /* do we have 3D features in the hw */ diff --git a/include/uapi/linux/affs_hardblocks.h b/include/uapi/linux/affs_hardblocks.h index 5e2fb8481252..a5aff2eb5f70 100644 --- a/include/uapi/linux/affs_hardblocks.h +++ b/include/uapi/linux/affs_hardblocks.h @@ -7,42 +7,42 @@ /* Just the needed definitions for the RDB of an Amiga HD. */ struct RigidDiskBlock { - __u32 rdb_ID; + __be32 rdb_ID; __be32 rdb_SummedLongs; - __s32 rdb_ChkSum; - __u32 rdb_HostID; + __be32 rdb_ChkSum; + __be32 rdb_HostID; __be32 rdb_BlockBytes; - __u32 rdb_Flags; - __u32 rdb_BadBlockList; + __be32 rdb_Flags; + __be32 rdb_BadBlockList; __be32 rdb_PartitionList; - __u32 rdb_FileSysHeaderList; - __u32 rdb_DriveInit; - __u32 rdb_Reserved1[6]; - __u32 rdb_Cylinders; - __u32 rdb_Sectors; - __u32 rdb_Heads; - __u32 rdb_Interleave; - __u32 rdb_Park; - __u32 rdb_Reserved2[3]; - __u32 rdb_WritePreComp; - __u32 rdb_ReducedWrite; - __u32 rdb_StepRate; - __u32 rdb_Reserved3[5]; - __u32 rdb_RDBBlocksLo; - __u32 rdb_RDBBlocksHi; - __u32 rdb_LoCylinder; - __u32 rdb_HiCylinder; - __u32 rdb_CylBlocks; - __u32 rdb_AutoParkSeconds; - __u32 rdb_HighRDSKBlock; - __u32 rdb_Reserved4; + __be32 rdb_FileSysHeaderList; + __be32 rdb_DriveInit; + __be32 rdb_Reserved1[6]; + __be32 rdb_Cylinders; + __be32 rdb_Sectors; + __be32 rdb_Heads; + __be32 rdb_Interleave; + __be32 rdb_Park; + __be32 rdb_Reserved2[3]; + __be32 rdb_WritePreComp; + __be32 rdb_ReducedWrite; + __be32 rdb_StepRate; + __be32 rdb_Reserved3[5]; + __be32 rdb_RDBBlocksLo; + __be32 rdb_RDBBlocksHi; + __be32 rdb_LoCylinder; + __be32 rdb_HiCylinder; + __be32 rdb_CylBlocks; + __be32 rdb_AutoParkSeconds; + __be32 rdb_HighRDSKBlock; + __be32 rdb_Reserved4; char rdb_DiskVendor[8]; char rdb_DiskProduct[16]; char rdb_DiskRevision[4]; char rdb_ControllerVendor[8]; char rdb_ControllerProduct[16]; char rdb_ControllerRevision[4]; - __u32 rdb_Reserved5[10]; + __be32 rdb_Reserved5[10]; }; #define IDNAME_RIGIDDISK 0x5244534B /* "RDSK" */ @@ -50,16 +50,16 @@ struct RigidDiskBlock { struct PartitionBlock { __be32 pb_ID; __be32 pb_SummedLongs; - __s32 pb_ChkSum; - __u32 pb_HostID; + __be32 pb_ChkSum; + __be32 pb_HostID; __be32 pb_Next; - __u32 pb_Flags; - __u32 pb_Reserved1[2]; - __u32 pb_DevFlags; + __be32 pb_Flags; + __be32 pb_Reserved1[2]; + __be32 pb_DevFlags; __u8 pb_DriveName[32]; - __u32 pb_Reserved2[15]; + __be32 pb_Reserved2[15]; __be32 pb_Environment[17]; - __u32 pb_EReserved[15]; + __be32 pb_EReserved[15]; }; #define IDNAME_PARTITION 0x50415254 /* "PART" */ diff --git a/include/uapi/linux/auto_dev-ioctl.h b/include/uapi/linux/auto_dev-ioctl.h index 62e625356dc8..08be539605fc 100644 --- a/include/uapi/linux/auto_dev-ioctl.h +++ b/include/uapi/linux/auto_dev-ioctl.h @@ -109,7 +109,7 @@ struct autofs_dev_ioctl { struct args_ismountpoint ismountpoint; }; - char path[0]; + char path[]; }; static inline void init_autofs_dev_ioctl(struct autofs_dev_ioctl *in) diff --git a/include/uapi/linux/blkzoned.h b/include/uapi/linux/blkzoned.h index b80fcc9ea525..f85743ef6e7d 100644 --- a/include/uapi/linux/blkzoned.h +++ b/include/uapi/linux/blkzoned.h @@ -51,13 +51,13 @@ enum blk_zone_type { * * The Zone Condition state machine in the ZBC/ZAC standards maps the above * deinitions as: - * - ZC1: Empty | BLK_ZONE_EMPTY + * - ZC1: Empty | BLK_ZONE_COND_EMPTY * - ZC2: Implicit Open | BLK_ZONE_COND_IMP_OPEN * - ZC3: Explicit Open | BLK_ZONE_COND_EXP_OPEN - * - ZC4: Closed | BLK_ZONE_CLOSED - * - ZC5: Full | BLK_ZONE_FULL - * - ZC6: Read Only | BLK_ZONE_READONLY - * - ZC7: Offline | BLK_ZONE_OFFLINE + * - ZC4: Closed | BLK_ZONE_COND_CLOSED + * - ZC5: Full | BLK_ZONE_COND_FULL + * - ZC6: Read Only | BLK_ZONE_COND_READONLY + * - ZC7: Offline | BLK_ZONE_COND_OFFLINE * * Conditions 0x5 to 0xC are reserved by the current ZBC/ZAC spec and should * be considered invalid. diff --git a/include/uapi/linux/bpf.h b/include/uapi/linux/bpf.h index 62ce1f5d1b1d..8790b3962e4b 100644 --- a/include/uapi/linux/bpf.h +++ b/include/uapi/linux/bpf.h @@ -19,6 +19,7 @@ /* ld/ldx fields */ #define BPF_DW 0x18 /* double word (64-bit) */ +#define BPF_MEMSX 0x80 /* load with sign extension */ #define BPF_ATOMIC 0xc0 /* atomic memory ops - op type in immediate */ #define BPF_XADD 0xc0 /* exclusive add - legacy name */ @@ -986,6 +987,7 @@ enum bpf_prog_type { BPF_PROG_TYPE_LSM, BPF_PROG_TYPE_SK_LOOKUP, BPF_PROG_TYPE_SYSCALL, /* a program that can execute syscalls */ + BPF_PROG_TYPE_NETFILTER, }; enum bpf_attach_type { @@ -1033,6 +1035,11 @@ enum bpf_attach_type { BPF_PERF_EVENT, BPF_TRACE_KPROBE_MULTI, BPF_LSM_CGROUP, + BPF_STRUCT_OPS, + BPF_NETFILTER, + BPF_TCX_INGRESS, + BPF_TCX_EGRESS, + BPF_TRACE_UPROBE_MULTI, __MAX_BPF_ATTACH_TYPE }; @@ -1049,10 +1056,22 @@ enum bpf_link_type { BPF_LINK_TYPE_PERF_EVENT = 7, BPF_LINK_TYPE_KPROBE_MULTI = 8, BPF_LINK_TYPE_STRUCT_OPS = 9, - + BPF_LINK_TYPE_NETFILTER = 10, + BPF_LINK_TYPE_TCX = 11, + BPF_LINK_TYPE_UPROBE_MULTI = 12, MAX_BPF_LINK_TYPE, }; +enum bpf_perf_event_type { + BPF_PERF_EVENT_UNSPEC = 0, + BPF_PERF_EVENT_UPROBE = 1, + BPF_PERF_EVENT_URETPROBE = 2, + BPF_PERF_EVENT_KPROBE = 3, + BPF_PERF_EVENT_KRETPROBE = 4, + BPF_PERF_EVENT_TRACEPOINT = 5, + BPF_PERF_EVENT_EVENT = 6, +}; + /* cgroup-bpf attach flags used in BPF_PROG_ATTACH command * * NONE(default): No further bpf programs allowed in the subtree. @@ -1099,7 +1118,12 @@ enum bpf_link_type { */ #define BPF_F_ALLOW_OVERRIDE (1U << 0) #define BPF_F_ALLOW_MULTI (1U << 1) +/* Generic attachment flags. */ #define BPF_F_REPLACE (1U << 2) +#define BPF_F_BEFORE (1U << 3) +#define BPF_F_AFTER (1U << 4) +#define BPF_F_ID (1U << 5) +#define BPF_F_LINK BPF_F_LINK /* 1 << 13 */ /* If BPF_F_STRICT_ALIGNMENT is used in BPF_PROG_LOAD command, the * verifier will perform strict alignment checking as if the kernel @@ -1108,7 +1132,7 @@ enum bpf_link_type { */ #define BPF_F_STRICT_ALIGNMENT (1U << 0) -/* If BPF_F_ANY_ALIGNMENT is used in BPF_PROF_LOAD command, the +/* If BPF_F_ANY_ALIGNMENT is used in BPF_PROG_LOAD command, the * verifier will allow any alignment whatsoever. On platforms * with strict alignment requirements for loads ands stores (such * as sparc and mips) the verifier validates that all loads and @@ -1164,7 +1188,21 @@ enum bpf_link_type { /* link_create.kprobe_multi.flags used in LINK_CREATE command for * BPF_TRACE_KPROBE_MULTI attach type to create return probe. */ -#define BPF_F_KPROBE_MULTI_RETURN (1U << 0) +enum { + BPF_F_KPROBE_MULTI_RETURN = (1U << 0) +}; + +/* link_create.uprobe_multi.flags used in LINK_CREATE command for + * BPF_TRACE_UPROBE_MULTI attach type to create return probe. + */ +enum { + BPF_F_UPROBE_MULTI_RETURN = (1U << 0) +}; + +/* link_create.netfilter.flags used in LINK_CREATE command for + * BPF_PROG_TYPE_NETFILTER to enable IP packet defragmentation. + */ +#define BPF_F_NETFILTER_IP_DEFRAG (1U << 0) /* When BPF ldimm64's insn[0].src_reg != 0 then this can have * the following extensions: @@ -1266,6 +1304,12 @@ enum { /* Create a map that is suitable to be an inner map with dynamic max entries */ BPF_F_INNER_MAP = (1U << 12), + +/* Create a map that will be registered/unregesitered by the backed bpf_link */ + BPF_F_LINK = (1U << 13), + +/* Get path from provided FD in BPF_OBJ_PIN/BPF_OBJ_GET commands */ + BPF_F_PATH_FD = (1U << 14), }; /* Flags for BPF_PROG_QUERY. */ @@ -1403,23 +1447,40 @@ union bpf_attr { __aligned_u64 fd_array; /* array of FDs */ __aligned_u64 core_relos; __u32 core_relo_rec_size; /* sizeof(struct bpf_core_relo) */ + /* output: actual total log contents size (including termintaing zero). + * It could be both larger than original log_size (if log was + * truncated), or smaller (if log buffer wasn't filled completely). + */ + __u32 log_true_size; }; struct { /* anonymous struct used by BPF_OBJ_* commands */ __aligned_u64 pathname; __u32 bpf_fd; __u32 file_flags; + /* Same as dirfd in openat() syscall; see openat(2) + * manpage for details of path FD and pathname semantics; + * path_fd should accompanied by BPF_F_PATH_FD flag set in + * file_flags field, otherwise it should be set to zero; + * if BPF_F_PATH_FD flag is not set, AT_FDCWD is assumed. + */ + __s32 path_fd; }; struct { /* anonymous struct used by BPF_PROG_ATTACH/DETACH commands */ - __u32 target_fd; /* container object to attach to */ - __u32 attach_bpf_fd; /* eBPF program to attach */ + union { + __u32 target_fd; /* target object to attach to or ... */ + __u32 target_ifindex; /* target ifindex */ + }; + __u32 attach_bpf_fd; __u32 attach_type; __u32 attach_flags; - __u32 replace_bpf_fd; /* previously attached eBPF - * program to replace if - * BPF_F_REPLACE is used - */ + __u32 replace_bpf_fd; + union { + __u32 relative_fd; + __u32 relative_id; + }; + __u64 expected_revision; }; struct { /* anonymous struct used by BPF_PROG_TEST_RUN command */ @@ -1465,16 +1526,26 @@ union bpf_attr { } info; struct { /* anonymous struct used by BPF_PROG_QUERY command */ - __u32 target_fd; /* container object to query */ + union { + __u32 target_fd; /* target object to query or ... */ + __u32 target_ifindex; /* target ifindex */ + }; __u32 attach_type; __u32 query_flags; __u32 attach_flags; __aligned_u64 prog_ids; - __u32 prog_cnt; + union { + __u32 prog_cnt; + __u32 count; + }; + __u32 :32; /* output: per-program attach_flags. * not allowed to be set during effective query. */ __aligned_u64 prog_attach_flags; + __aligned_u64 link_ids; + __aligned_u64 link_attach_flags; + __u64 revision; } query; struct { /* anonymous struct used by BPF_RAW_TRACEPOINT_OPEN command */ @@ -1488,6 +1559,11 @@ union bpf_attr { __u32 btf_size; __u32 btf_log_size; __u32 btf_log_level; + /* output: actual total log contents size (including termintaing zero). + * It could be both larger than original log_size (if log was + * truncated), or smaller (if log buffer wasn't filled completely). + */ + __u32 btf_log_true_size; }; struct { @@ -1507,15 +1583,18 @@ union bpf_attr { } task_fd_query; struct { /* struct used by BPF_LINK_CREATE command */ - __u32 prog_fd; /* eBPF program to attach */ union { - __u32 target_fd; /* object to attach to */ - __u32 target_ifindex; /* target ifindex */ + __u32 prog_fd; /* eBPF program to attach */ + __u32 map_fd; /* struct_ops to attach */ + }; + union { + __u32 target_fd; /* target object to attach to or ... */ + __u32 target_ifindex; /* target ifindex */ }; __u32 attach_type; /* attach type */ __u32 flags; /* extra flags */ union { - __u32 target_btf_id; /* btf_id of target to attach to */ + __u32 target_btf_id; /* btf_id of target to attach to */ struct { __aligned_u64 iter_info; /* extra bpf_iter_link_info */ __u32 iter_info_len; /* iter_info length */ @@ -1543,17 +1622,50 @@ union bpf_attr { */ __u64 cookie; } tracing; + struct { + __u32 pf; + __u32 hooknum; + __s32 priority; + __u32 flags; + } netfilter; + struct { + union { + __u32 relative_fd; + __u32 relative_id; + }; + __u64 expected_revision; + } tcx; + struct { + __aligned_u64 path; + __aligned_u64 offsets; + __aligned_u64 ref_ctr_offsets; + __aligned_u64 cookies; + __u32 cnt; + __u32 flags; + __u32 pid; + } uprobe_multi; }; } link_create; struct { /* struct used by BPF_LINK_UPDATE command */ __u32 link_fd; /* link fd */ - /* new program fd to update link with */ - __u32 new_prog_fd; + union { + /* new program fd to update link with */ + __u32 new_prog_fd; + /* new struct_ops map fd to update link with */ + __u32 new_map_fd; + }; __u32 flags; /* extra flags */ - /* expected link's program fd; is specified only if - * BPF_F_REPLACE flag is set in flags */ - __u32 old_prog_fd; + union { + /* expected link's program fd; is specified only if + * BPF_F_REPLACE flag is set in flags. + */ + __u32 old_prog_fd; + /* expected link's map fd; is specified only + * if BPF_F_REPLACE flag is set. + */ + __u32 old_map_fd; + }; } link_update; struct { @@ -1647,17 +1759,17 @@ union bpf_attr { * Description * This helper is a "printk()-like" facility for debugging. It * prints a message defined by format *fmt* (of size *fmt_size*) - * to file *\/sys/kernel/debug/tracing/trace* from DebugFS, if + * to file *\/sys/kernel/tracing/trace* from TraceFS, if * available. It can take up to three additional **u64** * arguments (as an eBPF helpers, the total number of arguments is * limited to five). * * Each time the helper is called, it appends a line to the trace. - * Lines are discarded while *\/sys/kernel/debug/tracing/trace* is - * open, use *\/sys/kernel/debug/tracing/trace_pipe* to avoid this. + * Lines are discarded while *\/sys/kernel/tracing/trace* is + * open, use *\/sys/kernel/tracing/trace_pipe* to avoid this. * The format of the trace is customizable, and the exact output * one will get depends on the options set in - * *\/sys/kernel/debug/tracing/trace_options* (see also the + * *\/sys/kernel/tracing/trace_options* (see also the * *README* file under the same directory). However, it usually * defaults to something like: * @@ -3131,6 +3243,10 @@ union bpf_attr { * **BPF_FIB_LOOKUP_DIRECT** * Do a direct table lookup vs full lookup using FIB * rules. + * **BPF_FIB_LOOKUP_TBID** + * Used with BPF_FIB_LOOKUP_DIRECT. + * Use the routing table ID present in *params*->tbid + * for the fib lookup. * **BPF_FIB_LOOKUP_OUTPUT** * Perform lookup from an egress perspective (default is * ingress). @@ -4108,9 +4224,6 @@ union bpf_attr { * **-EOPNOTSUPP** if the operation is not supported, for example * a call from outside of TC ingress. * - * **-ESOCKTNOSUPPORT** if the socket type is not supported - * (reuseport). - * * long bpf_sk_assign(struct bpf_sk_lookup *ctx, struct bpf_sock *sk, u64 flags) * Description * Helper is overloaded depending on BPF program type. This @@ -4969,6 +5082,12 @@ union bpf_attr { * different maps if key/value layout matches across maps. * Every bpf_timer_set_callback() can have different callback_fn. * + * *flags* can be one of: + * + * **BPF_F_TIMER_ABS** + * Start the timer in absolute expire value instead of the + * default relative one. + * * Return * 0 on success. * **-EINVAL** if *timer* was not initialized with bpf_timer_init() earlier @@ -4987,9 +5106,14 @@ union bpf_attr { * u64 bpf_get_func_ip(void *ctx) * Description * Get address of the traced function (for tracing and kprobe programs). + * + * When called for kprobe program attached as uprobe it returns + * probe address for both entry and return uprobe. + * * Return - * Address of the traced function. + * Address of the traced function for kprobe. * 0 for kprobes placed within the function (not at the entry). + * Address of the probe for uprobe and return uprobe. * * u64 bpf_get_attach_cookie(void *ctx) * Description @@ -5325,11 +5449,22 @@ union bpf_attr { * Description * Write *len* bytes from *src* into *dst*, starting from *offset* * into *dst*. - * *flags* is currently unused. + * + * *flags* must be 0 except for skb-type dynptrs. + * + * For skb-type dynptrs: + * * All data slices of the dynptr are automatically + * invalidated after **bpf_dynptr_write**\ (). This is + * because writing may pull the skb and change the + * underlying packet buffer. + * + * * For *flags*, please see the flags accepted by + * **bpf_skb_store_bytes**\ (). * Return * 0 on success, -E2BIG if *offset* + *len* exceeds the length * of *dst*'s data, -EINVAL if *dst* is an invalid dynptr or if *dst* - * is a read-only dynptr or if *flags* is not 0. + * is a read-only dynptr or if *flags* is not correct. For skb-type dynptrs, + * other errors correspond to errors returned by **bpf_skb_store_bytes**\ (). * * void *bpf_dynptr_data(const struct bpf_dynptr *ptr, u32 offset, u32 len) * Description @@ -5337,6 +5472,9 @@ union bpf_attr { * * *len* must be a statically known value. The returned data slice * is invalidated whenever the dynptr is invalidated. + * + * skb and xdp type dynptrs may not use bpf_dynptr_data. They should + * instead use bpf_dynptr_slice and bpf_dynptr_slice_rdwr. * Return * Pointer to the underlying dynptr data, NULL if the dynptr is * read-only, if the dynptr is invalid, or if the offset and length @@ -6116,6 +6254,19 @@ struct bpf_sock_tuple { }; }; +/* (Simplified) user return codes for tcx prog type. + * A valid tcx program must return one of these defined values. All other + * return codes are reserved for future use. Must remain compatible with + * their TC_ACT_* counter-parts. For compatibility in behavior, unknown + * return codes are mapped to TCX_NEXT. + */ +enum tcx_action_base { + TCX_NEXT = -1, + TCX_PASS = 0, + TCX_DROP = 2, + TCX_REDIRECT = 7, +}; + struct bpf_xdp_sock { __u32 queue_id; }; @@ -6359,6 +6510,49 @@ struct bpf_link_info { struct { __u32 ifindex; } xdp; + struct { + __u32 map_id; + } struct_ops; + struct { + __u32 pf; + __u32 hooknum; + __s32 priority; + __u32 flags; + } netfilter; + struct { + __aligned_u64 addrs; + __u32 count; /* in/out: kprobe_multi function count */ + __u32 flags; + } kprobe_multi; + struct { + __u32 type; /* enum bpf_perf_event_type */ + __u32 :32; + union { + struct { + __aligned_u64 file_name; /* in/out */ + __u32 name_len; + __u32 offset; /* offset from file_name */ + } uprobe; /* BPF_PERF_EVENT_UPROBE, BPF_PERF_EVENT_URETPROBE */ + struct { + __aligned_u64 func_name; /* in/out */ + __u32 name_len; + __u32 offset; /* offset from func_name */ + __u64 addr; + } kprobe; /* BPF_PERF_EVENT_KPROBE, BPF_PERF_EVENT_KRETPROBE */ + struct { + __aligned_u64 tp_name; /* in/out */ + __u32 name_len; + } tracepoint; /* BPF_PERF_EVENT_TRACEPOINT */ + struct { + __u64 config; + __u32 type; + } event; /* BPF_PERF_EVENT_EVENT */ + }; + } perf_event; + struct { + __u32 ifindex; + __u32 attach_type; + } tcx; }; } __attribute__((aligned(8))); @@ -6756,6 +6950,7 @@ enum { BPF_FIB_LOOKUP_DIRECT = (1U << 0), BPF_FIB_LOOKUP_OUTPUT = (1U << 1), BPF_FIB_LOOKUP_SKIP_NEIGH = (1U << 2), + BPF_FIB_LOOKUP_TBID = (1U << 3), }; enum { @@ -6816,9 +7011,19 @@ struct bpf_fib_lookup { __u32 ipv6_dst[4]; /* in6_addr; network order */ }; - /* output */ - __be16 h_vlan_proto; - __be16 h_vlan_TCI; + union { + struct { + /* output */ + __be16 h_vlan_proto; + __be16 h_vlan_TCI; + }; + /* input: when accompanied with the + * 'BPF_FIB_LOOKUP_DIRECT | BPF_FIB_LOOKUP_TBID` flags, a + * specific routing table to use for the fib lookup. + */ + __u32 tbid; + }; + __u8 smac[6]; /* ETH_ALEN */ __u8 dmac[6]; /* ETH_ALEN */ }; @@ -6921,6 +7126,7 @@ struct bpf_list_head { struct bpf_list_node { __u64 :64; __u64 :64; + __u64 :64; } __attribute__((aligned(8))); struct bpf_rb_root { @@ -6932,8 +7138,13 @@ struct bpf_rb_node { __u64 :64; __u64 :64; __u64 :64; + __u64 :64; } __attribute__((aligned(8))); +struct bpf_refcount { + __u32 :32; +} __attribute__((aligned(4))); + struct bpf_sysctl { __u32 write; /* Sysctl is being read (= 0) or written (= 1). * Allows 1,2,4-byte read, but no write. @@ -7083,4 +7294,21 @@ struct bpf_core_relo { enum bpf_core_relo_kind kind; }; +/* + * Flags to control bpf_timer_start() behaviour. + * - BPF_F_TIMER_ABS: Timeout passed is absolute time, by default it is + * relative to current time. + */ +enum { + BPF_F_TIMER_ABS = (1ULL << 0), +}; + +/* BPF numbers iterator state */ +struct bpf_iter_num { + /* opaque iterator state; having __u64 here allows to preserve correct + * alignment requirements in vmlinux.h, generated from BTF + */ + __u64 __opaque[1]; +} __attribute__((aligned(8))); + #endif /* _UAPI__LINUX_BPF_H__ */ diff --git a/include/uapi/linux/btrfs.h b/include/uapi/linux/btrfs.h index ada0a489bf2b..dbb8b96da50d 100644 --- a/include/uapi/linux/btrfs.h +++ b/include/uapi/linux/btrfs.h @@ -187,6 +187,7 @@ struct btrfs_scrub_progress { }; #define BTRFS_SCRUB_READONLY 1 +#define BTRFS_SCRUB_SUPPORTED_FLAGS (BTRFS_SCRUB_READONLY) struct btrfs_ioctl_scrub_args { __u64 devid; /* in */ __u64 start; /* in */ diff --git a/include/uapi/linux/btrfs_tree.h b/include/uapi/linux/btrfs_tree.h index ab38d0f411fa..fc3c32186d7e 100644 --- a/include/uapi/linux/btrfs_tree.h +++ b/include/uapi/linux/btrfs_tree.h @@ -220,7 +220,11 @@ #define BTRFS_EXTENT_DATA_REF_KEY 178 -#define BTRFS_EXTENT_REF_V0_KEY 180 +/* + * Obsolete key. Defintion removed in 6.6, value may be reused in the future. + * + * #define BTRFS_EXTENT_REF_V0_KEY 180 + */ #define BTRFS_SHARED_BLOCK_REF_KEY 182 diff --git a/include/uapi/linux/can.h b/include/uapi/linux/can.h index dd645ea72306..939db2388208 100644 --- a/include/uapi/linux/can.h +++ b/include/uapi/linux/can.h @@ -285,6 +285,5 @@ struct can_filter { }; #define CAN_INV_FILTER 0x20000000U /* to be set in can_filter.can_id */ -#define CAN_RAW_FILTER_MAX 512 /* maximum number of can_filter set via setsockopt() */ #endif /* !_UAPI_CAN_H */ diff --git a/include/uapi/linux/can/raw.h b/include/uapi/linux/can/raw.h index ff12f525c37c..31622c9b7988 100644 --- a/include/uapi/linux/can/raw.h +++ b/include/uapi/linux/can/raw.h @@ -49,6 +49,8 @@ #include <linux/can.h> #define SOL_CAN_RAW (SOL_CAN_BASE + CAN_RAW) +#define CAN_RAW_FILTER_MAX 512 /* maximum number of can_filter set via setsockopt() */ + enum { SCM_CAN_RAW_ERRQUEUE = 1, }; diff --git a/include/uapi/linux/capability.h b/include/uapi/linux/capability.h index 3d61a0ae055d..5bb906098697 100644 --- a/include/uapi/linux/capability.h +++ b/include/uapi/linux/capability.h @@ -41,11 +41,12 @@ typedef struct __user_cap_header_struct { int pid; } __user *cap_user_header_t; -typedef struct __user_cap_data_struct { +struct __user_cap_data_struct { __u32 effective; __u32 permitted; __u32 inheritable; -} __user *cap_user_data_t; +}; +typedef struct __user_cap_data_struct __user *cap_user_data_t; #define VFS_CAP_REVISION_MASK 0xFF000000 diff --git a/include/uapi/linux/cgroupstats.h b/include/uapi/linux/cgroupstats.h index aa306e4cd6c1..80b2c8594480 100644 --- a/include/uapi/linux/cgroupstats.h +++ b/include/uapi/linux/cgroupstats.h @@ -24,8 +24,6 @@ * basis. This data is shared using taskstats. * * Most of these states are derived by looking at the task->state value - * For the nr_io_wait state, a flag in the delay accounting structure - * indicates that the task is waiting on IO * * Each member is aligned to a 8 byte boundary. */ diff --git a/include/uapi/linux/cm4000_cs.h b/include/uapi/linux/cm4000_cs.h deleted file mode 100644 index c70a62ec8a49..000000000000 --- a/include/uapi/linux/cm4000_cs.h +++ /dev/null @@ -1,64 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -#ifndef _UAPI_CM4000_H_ -#define _UAPI_CM4000_H_ - -#include <linux/types.h> -#include <linux/ioctl.h> - -#define MAX_ATR 33 - -#define CM4000_MAX_DEV 4 - -/* those two structures are passed via ioctl() from/to userspace. They are - * used by existing userspace programs, so I kepth the awkward "bIFSD" naming - * not to break compilation of userspace apps. -HW */ - -typedef struct atreq { - __s32 atr_len; - unsigned char atr[64]; - __s32 power_act; - unsigned char bIFSD; - unsigned char bIFSC; -} atreq_t; - - -/* what is particularly stupid in the original driver is the arch-dependent - * member sizes. This leads to CONFIG_COMPAT breakage, since 32bit userspace - * will lay out the structure members differently than the 64bit kernel. - * - * I've changed "ptsreq.protocol" from "unsigned long" to "__u32". - * On 32bit this will make no difference. With 64bit kernels, it will make - * 32bit apps work, too. - */ - -typedef struct ptsreq { - __u32 protocol; /*T=0: 2^0, T=1: 2^1*/ - unsigned char flags; - unsigned char pts1; - unsigned char pts2; - unsigned char pts3; -} ptsreq_t; - -#define CM_IOC_MAGIC 'c' -#define CM_IOC_MAXNR 255 - -#define CM_IOCGSTATUS _IOR (CM_IOC_MAGIC, 0, unsigned char *) -#define CM_IOCGATR _IOWR(CM_IOC_MAGIC, 1, atreq_t *) -#define CM_IOCSPTS _IOW (CM_IOC_MAGIC, 2, ptsreq_t *) -#define CM_IOCSRDR _IO (CM_IOC_MAGIC, 3) -#define CM_IOCARDOFF _IO (CM_IOC_MAGIC, 4) - -#define CM_IOSDBGLVL _IOW(CM_IOC_MAGIC, 250, int*) - -/* card and device states */ -#define CM_CARD_INSERTED 0x01 -#define CM_CARD_POWERED 0x02 -#define CM_ATR_PRESENT 0x04 -#define CM_ATR_VALID 0x08 -#define CM_STATE_VALID 0x0f -/* extra info only from CM4000 */ -#define CM_NO_READER 0x10 -#define CM_BAD_CARD 0x20 - - -#endif /* _UAPI_CM4000_H_ */ diff --git a/include/uapi/linux/cn_proc.h b/include/uapi/linux/cn_proc.h index db210625cee8..f2afb7cc4926 100644 --- a/include/uapi/linux/cn_proc.h +++ b/include/uapi/linux/cn_proc.h @@ -30,6 +30,49 @@ enum proc_cn_mcast_op { PROC_CN_MCAST_IGNORE = 2 }; +#define PROC_EVENT_ALL (PROC_EVENT_FORK | PROC_EVENT_EXEC | PROC_EVENT_UID | \ + PROC_EVENT_GID | PROC_EVENT_SID | PROC_EVENT_PTRACE | \ + PROC_EVENT_COMM | PROC_EVENT_NONZERO_EXIT | \ + PROC_EVENT_COREDUMP | PROC_EVENT_EXIT) + +/* + * If you add an entry in proc_cn_event, make sure you add it in + * PROC_EVENT_ALL above as well. + */ +enum proc_cn_event { + /* Use successive bits so the enums can be used to record + * sets of events as well + */ + PROC_EVENT_NONE = 0x00000000, + PROC_EVENT_FORK = 0x00000001, + PROC_EVENT_EXEC = 0x00000002, + PROC_EVENT_UID = 0x00000004, + PROC_EVENT_GID = 0x00000040, + PROC_EVENT_SID = 0x00000080, + PROC_EVENT_PTRACE = 0x00000100, + PROC_EVENT_COMM = 0x00000200, + /* "next" should be 0x00000400 */ + /* "last" is the last process event: exit, + * while "next to last" is coredumping event + * before that is report only if process dies + * with non-zero exit status + */ + PROC_EVENT_NONZERO_EXIT = 0x20000000, + PROC_EVENT_COREDUMP = 0x40000000, + PROC_EVENT_EXIT = 0x80000000 +}; + +struct proc_input { + enum proc_cn_mcast_op mcast_op; + enum proc_cn_event event_type; +}; + +static inline enum proc_cn_event valid_event(enum proc_cn_event ev_type) +{ + ev_type &= PROC_EVENT_ALL; + return ev_type; +} + /* * From the user's point of view, the process * ID is the thread group ID and thread ID is the internal @@ -44,24 +87,7 @@ enum proc_cn_mcast_op { */ struct proc_event { - enum what { - /* Use successive bits so the enums can be used to record - * sets of events as well - */ - PROC_EVENT_NONE = 0x00000000, - PROC_EVENT_FORK = 0x00000001, - PROC_EVENT_EXEC = 0x00000002, - PROC_EVENT_UID = 0x00000004, - PROC_EVENT_GID = 0x00000040, - PROC_EVENT_SID = 0x00000080, - PROC_EVENT_PTRACE = 0x00000100, - PROC_EVENT_COMM = 0x00000200, - /* "next" should be 0x00000400 */ - /* "last" is the last process event: exit, - * while "next to last" is coredumping event */ - PROC_EVENT_COREDUMP = 0x40000000, - PROC_EVENT_EXIT = 0x80000000 - } what; + enum proc_cn_event what; __u32 cpu; __u64 __attribute__((aligned(8))) timestamp_ns; /* Number of nano seconds since system boot */ diff --git a/include/uapi/linux/const.h b/include/uapi/linux/const.h index af2a44c08683..a429381e7ca5 100644 --- a/include/uapi/linux/const.h +++ b/include/uapi/linux/const.h @@ -28,7 +28,7 @@ #define _BITUL(x) (_UL(1) << (x)) #define _BITULL(x) (_ULL(1) << (x)) -#define __ALIGN_KERNEL(x, a) __ALIGN_KERNEL_MASK(x, (typeof(x))(a) - 1) +#define __ALIGN_KERNEL(x, a) __ALIGN_KERNEL_MASK(x, (__typeof__(x))(a) - 1) #define __ALIGN_KERNEL_MASK(x, mask) (((x) + (mask)) & ~(mask)) #define __KERNEL_DIV_ROUND_UP(n, d) (((n) + (d) - 1) / (d)) diff --git a/include/uapi/linux/counter.h b/include/uapi/linux/counter.h index 8ab12d731e3b..fc248ef00e86 100644 --- a/include/uapi/linux/counter.h +++ b/include/uapi/linux/counter.h @@ -127,6 +127,12 @@ enum counter_count_mode { COUNTER_COUNT_MODE_RANGE_LIMIT, COUNTER_COUNT_MODE_NON_RECYCLE, COUNTER_COUNT_MODE_MODULO_N, + COUNTER_COUNT_MODE_INTERRUPT_ON_TERMINAL_COUNT, + COUNTER_COUNT_MODE_HARDWARE_RETRIGGERABLE_ONESHOT, + COUNTER_COUNT_MODE_RATE_GENERATOR, + COUNTER_COUNT_MODE_SQUARE_WAVE_MODE, + COUNTER_COUNT_MODE_SOFTWARE_TRIGGERED_STROBE, + COUNTER_COUNT_MODE_HARDWARE_TRIGGERED_STROBE, }; /* Count function values */ diff --git a/include/uapi/linux/cxl_mem.h b/include/uapi/linux/cxl_mem.h index 86bbacf2a315..14bc6e742148 100644 --- a/include/uapi/linux/cxl_mem.h +++ b/include/uapi/linux/cxl_mem.h @@ -40,19 +40,22 @@ ___C(SET_ALERT_CONFIG, "Set Alert Configuration"), \ ___C(GET_SHUTDOWN_STATE, "Get Shutdown State"), \ ___C(SET_SHUTDOWN_STATE, "Set Shutdown State"), \ - ___C(GET_POISON, "Get Poison List"), \ - ___C(INJECT_POISON, "Inject Poison"), \ - ___C(CLEAR_POISON, "Clear Poison"), \ + ___DEPRECATED(GET_POISON, "Get Poison List"), \ + ___DEPRECATED(INJECT_POISON, "Inject Poison"), \ + ___DEPRECATED(CLEAR_POISON, "Clear Poison"), \ ___C(GET_SCAN_MEDIA_CAPS, "Get Scan Media Capabilities"), \ - ___C(SCAN_MEDIA, "Scan Media"), \ - ___C(GET_SCAN_MEDIA, "Get Scan Media Results"), \ + ___DEPRECATED(SCAN_MEDIA, "Scan Media"), \ + ___DEPRECATED(GET_SCAN_MEDIA, "Get Scan Media Results"), \ ___C(MAX, "invalid / last command") #define ___C(a, b) CXL_MEM_COMMAND_ID_##a +#define ___DEPRECATED(a, b) CXL_MEM_DEPRECATED_ID_##a enum { CXL_CMDS }; #undef ___C +#undef ___DEPRECATED #define ___C(a, b) { b } +#define ___DEPRECATED(a, b) { "Deprecated " b } static const struct { const char *name; } cxl_command_names[] __attribute__((__unused__)) = { CXL_CMDS }; @@ -68,6 +71,28 @@ static const struct { */ #undef ___C +#undef ___DEPRECATED +#define ___C(a, b) (0) +#define ___DEPRECATED(a, b) (1) + +static const __u8 cxl_deprecated_commands[] + __attribute__((__unused__)) = { CXL_CMDS }; + +/* + * Here's how this actually breaks out: + * cxl_deprecated_commands[] = { + * [CXL_MEM_COMMAND_ID_INVALID] = 0, + * [CXL_MEM_COMMAND_ID_IDENTIFY] = 0, + * ... + * [CXL_MEM_DEPRECATED_ID_GET_POISON] = 1, + * [CXL_MEM_DEPRECATED_ID_INJECT_POISON] = 1, + * [CXL_MEM_DEPRECATED_ID_CLEAR_POISON] = 1, + * ... + * }; + */ + +#undef ___C +#undef ___DEPRECATED /** * struct cxl_command_info - Command information returned from a query. diff --git a/include/uapi/linux/devlink.h b/include/uapi/linux/devlink.h index 3782d4219ac9..03875e078be8 100644 --- a/include/uapi/linux/devlink.h +++ b/include/uapi/linux/devlink.h @@ -661,6 +661,8 @@ enum devlink_resource_unit { enum devlink_port_fn_attr_cap { DEVLINK_PORT_FN_ATTR_CAP_ROCE_BIT, DEVLINK_PORT_FN_ATTR_CAP_MIGRATABLE_BIT, + DEVLINK_PORT_FN_ATTR_CAP_IPSEC_CRYPTO_BIT, + DEVLINK_PORT_FN_ATTR_CAP_IPSEC_PACKET_BIT, /* Add new caps above */ __DEVLINK_PORT_FN_ATTR_CAPS_MAX, @@ -669,6 +671,8 @@ enum devlink_port_fn_attr_cap { #define DEVLINK_PORT_FN_CAP_ROCE _BITUL(DEVLINK_PORT_FN_ATTR_CAP_ROCE_BIT) #define DEVLINK_PORT_FN_CAP_MIGRATABLE \ _BITUL(DEVLINK_PORT_FN_ATTR_CAP_MIGRATABLE_BIT) +#define DEVLINK_PORT_FN_CAP_IPSEC_CRYPTO _BITUL(DEVLINK_PORT_FN_ATTR_CAP_IPSEC_CRYPTO_BIT) +#define DEVLINK_PORT_FN_CAP_IPSEC_PACKET _BITUL(DEVLINK_PORT_FN_ATTR_CAP_IPSEC_PACKET_BIT) enum devlink_port_function_attr { DEVLINK_PORT_FUNCTION_ATTR_UNSPEC, diff --git a/include/uapi/linux/dlm.h b/include/uapi/linux/dlm.h index 1923f4f3b05e..e7e905fb0bb2 100644 --- a/include/uapi/linux/dlm.h +++ b/include/uapi/linux/dlm.h @@ -68,6 +68,7 @@ struct dlm_lksb { /* dlm_new_lockspace() flags */ +/* DLM_LSFL_TIMEWARN is deprecated and reserved. DO NOT USE! */ #define DLM_LSFL_TIMEWARN 0x00000002 #define DLM_LSFL_NEWEXCL 0x00000008 diff --git a/include/uapi/linux/dlm_netlink.h b/include/uapi/linux/dlm_netlink.h deleted file mode 100644 index 5dc3a67d353d..000000000000 --- a/include/uapi/linux/dlm_netlink.h +++ /dev/null @@ -1,60 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -/* - * Copyright (C) 2007 Red Hat, Inc. All rights reserved. - * - * This copyrighted material is made available to anyone wishing to use, - * modify, copy, or redistribute it subject to the terms and conditions - * of the GNU General Public License v.2. - */ - -#ifndef _DLM_NETLINK_H -#define _DLM_NETLINK_H - -#include <linux/types.h> -#include <linux/dlmconstants.h> - -enum { - DLM_STATUS_WAITING = 1, - DLM_STATUS_GRANTED = 2, - DLM_STATUS_CONVERT = 3, -}; - -#define DLM_LOCK_DATA_VERSION 1 - -struct dlm_lock_data { - __u16 version; - __u32 lockspace_id; - int nodeid; - int ownpid; - __u32 id; - __u32 remid; - __u64 xid; - __s8 status; - __s8 grmode; - __s8 rqmode; - unsigned long timestamp; - int resource_namelen; - char resource_name[DLM_RESNAME_MAXLEN]; -}; - -enum { - DLM_CMD_UNSPEC = 0, - DLM_CMD_HELLO, /* user->kernel */ - DLM_CMD_TIMEOUT, /* kernel->user */ - __DLM_CMD_MAX, -}; - -#define DLM_CMD_MAX (__DLM_CMD_MAX - 1) - -enum { - DLM_TYPE_UNSPEC = 0, - DLM_TYPE_LOCK, - __DLM_TYPE_MAX, -}; - -#define DLM_TYPE_MAX (__DLM_TYPE_MAX - 1) - -#define DLM_GENL_VERSION 0x1 -#define DLM_GENL_NAME "DLM" - -#endif /* _DLM_NETLINK_H */ diff --git a/include/uapi/linux/dlm_plock.h b/include/uapi/linux/dlm_plock.h index 63b6c1fd9169..eb66afcac40e 100644 --- a/include/uapi/linux/dlm_plock.h +++ b/include/uapi/linux/dlm_plock.h @@ -22,6 +22,7 @@ enum { DLM_PLOCK_OP_LOCK = 1, DLM_PLOCK_OP_UNLOCK, DLM_PLOCK_OP_GET, + DLM_PLOCK_OP_CANCEL, }; #define DLM_PLOCK_FL_CLOSE 1 diff --git a/include/uapi/linux/dlmconstants.h b/include/uapi/linux/dlmconstants.h index a8ae47c32a37..6ca77a6388bc 100644 --- a/include/uapi/linux/dlmconstants.h +++ b/include/uapi/linux/dlmconstants.h @@ -87,7 +87,6 @@ * DLM_LKF_NODLCKWT * * Do not cancel the lock if it gets into conversion deadlock. - * Exclude this lock from being monitored due to DLM_LSFL_TIMEWARN. * * DLM_LKF_NODLCKBLK * @@ -132,6 +131,10 @@ * Unlock the lock even if it is converting or waiting or has sublocks. * Only really for use by the userland device.c code. * + * DLM_LKF_TIMEOUT + * + * This value is deprecated and reserved. DO NOT USE! + * */ #define DLM_LKF_NOQUEUE 0x00000001 diff --git a/include/uapi/linux/dm-ioctl.h b/include/uapi/linux/dm-ioctl.h index 7edf335778ba..1990b5700f69 100644 --- a/include/uapi/linux/dm-ioctl.h +++ b/include/uapi/linux/dm-ioctl.h @@ -286,9 +286,9 @@ enum { #define DM_DEV_SET_GEOMETRY _IOWR(DM_IOCTL, DM_DEV_SET_GEOMETRY_CMD, struct dm_ioctl) #define DM_VERSION_MAJOR 4 -#define DM_VERSION_MINOR 47 +#define DM_VERSION_MINOR 48 #define DM_VERSION_PATCHLEVEL 0 -#define DM_VERSION_EXTRA "-ioctl (2022-07-28)" +#define DM_VERSION_EXTRA "-ioctl (2023-03-01)" /* Status bits */ #define DM_READONLY_FLAG (1 << 0) /* In/Out */ diff --git a/include/uapi/linux/dvb/frontend.h b/include/uapi/linux/dvb/frontend.h index 326f6a53f1f2..7e0983b987c2 100644 --- a/include/uapi/linux/dvb/frontend.h +++ b/include/uapi/linux/dvb/frontend.h @@ -296,6 +296,10 @@ enum fe_spectral_inversion { * @FEC_28_45: Forward Error Correction Code 28/45 * @FEC_32_45: Forward Error Correction Code 32/45 * @FEC_77_90: Forward Error Correction Code 77/90 + * @FEC_11_45: Forward Error Correction Code 11/45 + * @FEC_4_15: Forward Error Correction Code 4/15 + * @FEC_14_45: Forward Error Correction Code 14/45 + * @FEC_7_15: Forward Error Correction Code 7/15 * * Please note that not all FEC types are supported by a given standard. */ @@ -329,6 +333,10 @@ enum fe_code_rate { FEC_28_45, FEC_32_45, FEC_77_90, + FEC_11_45, + FEC_4_15, + FEC_14_45, + FEC_7_15, }; /** diff --git a/include/uapi/linux/dvb/version.h b/include/uapi/linux/dvb/version.h index 1a8cd038aa0b..20bc874de321 100644 --- a/include/uapi/linux/dvb/version.h +++ b/include/uapi/linux/dvb/version.h @@ -10,6 +10,6 @@ #define _DVBVERSION_H_ #define DVB_API_VERSION 5 -#define DVB_API_VERSION_MINOR 11 +#define DVB_API_VERSION_MINOR 12 #endif /*_DVBVERSION_H_*/ diff --git a/include/uapi/linux/elf-fdpic.h b/include/uapi/linux/elf-fdpic.h index 4fcc6cfebe18..ec23f0871129 100644 --- a/include/uapi/linux/elf-fdpic.h +++ b/include/uapi/linux/elf-fdpic.h @@ -32,4 +32,19 @@ struct elf32_fdpic_loadmap { #define ELF32_FDPIC_LOADMAP_VERSION 0x0000 +/* segment mappings for ELF FDPIC libraries/executables/interpreters */ +struct elf64_fdpic_loadseg { + Elf64_Addr addr; /* core address to which mapped */ + Elf64_Addr p_vaddr; /* VMA recorded in file */ + Elf64_Word p_memsz; /* allocation size recorded in file */ +}; + +struct elf64_fdpic_loadmap { + Elf64_Half version; /* version of these structures, just in case... */ + Elf64_Half nsegs; /* number of segments */ + struct elf64_fdpic_loadseg segs[]; +}; + +#define ELF64_FDPIC_LOADMAP_VERSION 0x0000 + #endif /* _UAPI_LINUX_ELF_FDPIC_H */ diff --git a/include/uapi/linux/elf.h b/include/uapi/linux/elf.h index ac3da855fb19..ee0bcff14b69 100644 --- a/include/uapi/linux/elf.h +++ b/include/uapi/linux/elf.h @@ -372,7 +372,8 @@ typedef struct elf64_shdr { * Notes used in ET_CORE. Architectures export some of the arch register sets * using the corresponding note types via the PTRACE_GETREGSET and * PTRACE_SETREGSET requests. - * The note name for all these is "LINUX". + * The note name for these types is "LINUX", except NT_PRFPREG that is named + * "CORE". */ #define NT_PRSTATUS 1 #define NT_PRFPREG 2 @@ -403,9 +404,13 @@ typedef struct elf64_shdr { #define NT_PPC_TM_CPPR 0x10e /* TM checkpointed Program Priority Register */ #define NT_PPC_TM_CDSCR 0x10f /* TM checkpointed Data Stream Control Register */ #define NT_PPC_PKEY 0x110 /* Memory Protection Keys registers */ +#define NT_PPC_DEXCR 0x111 /* PowerPC DEXCR registers */ +#define NT_PPC_HASHKEYR 0x112 /* PowerPC HASHKEYR register */ #define NT_386_TLS 0x200 /* i386 TLS slots (struct user_desc) */ #define NT_386_IOPERM 0x201 /* x86 io permission bitmap (1=deny) */ #define NT_X86_XSTATE 0x202 /* x86 extended state using xsave */ +/* Old binutils treats 0x203 as a CET state */ +#define NT_X86_SHSTK 0x204 /* x86 SHSTK state */ #define NT_S390_HIGH_GPRS 0x300 /* s390 upper register halves */ #define NT_S390_TIMER 0x301 /* s390 timer register */ #define NT_S390_TODCMP 0x302 /* s390 TOD clock comparator register */ diff --git a/include/uapi/linux/ethtool_netlink.h b/include/uapi/linux/ethtool_netlink.h index d39ce21381c5..73e2c10dc2cc 100644 --- a/include/uapi/linux/ethtool_netlink.h +++ b/include/uapi/linux/ethtool_netlink.h @@ -357,6 +357,8 @@ enum { ETHTOOL_A_RINGS_CQE_SIZE, /* u32 */ ETHTOOL_A_RINGS_TX_PUSH, /* u8 */ ETHTOOL_A_RINGS_RX_PUSH, /* u8 */ + ETHTOOL_A_RINGS_TX_PUSH_BUF_LEN, /* u32 */ + ETHTOOL_A_RINGS_TX_PUSH_BUF_LEN_MAX, /* u32 */ /* add new constants above here */ __ETHTOOL_A_RINGS_CNT, @@ -781,7 +783,7 @@ enum { /* add new constants above here */ __ETHTOOL_A_STATS_GRP_CNT, - ETHTOOL_A_STATS_GRP_MAX = (__ETHTOOL_A_STATS_CNT - 1) + ETHTOOL_A_STATS_GRP_MAX = (__ETHTOOL_A_STATS_GRP_CNT - 1) }; enum { diff --git a/include/uapi/linux/eventfd.h b/include/uapi/linux/eventfd.h new file mode 100644 index 000000000000..2eb9ab6c32f3 --- /dev/null +++ b/include/uapi/linux/eventfd.h @@ -0,0 +1,11 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +#ifndef _UAPI_LINUX_EVENTFD_H +#define _UAPI_LINUX_EVENTFD_H + +#include <linux/fcntl.h> + +#define EFD_SEMAPHORE (1 << 0) +#define EFD_CLOEXEC O_CLOEXEC +#define EFD_NONBLOCK O_NONBLOCK + +#endif /* _UAPI_LINUX_EVENTFD_H */ diff --git a/include/uapi/linux/ext4.h b/include/uapi/linux/ext4.h new file mode 100644 index 000000000000..1c4c2dd29112 --- /dev/null +++ b/include/uapi/linux/ext4.h @@ -0,0 +1,117 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ + +#ifndef _UAPI_LINUX_EXT4_H +#define _UAPI_LINUX_EXT4_H +#include <linux/fiemap.h> +#include <linux/fs.h> +#include <linux/ioctl.h> +#include <linux/types.h> + +/* + * ext4-specific ioctl commands + */ +#define EXT4_IOC_GETVERSION _IOR('f', 3, long) +#define EXT4_IOC_SETVERSION _IOW('f', 4, long) +#define EXT4_IOC_GETVERSION_OLD FS_IOC_GETVERSION +#define EXT4_IOC_SETVERSION_OLD FS_IOC_SETVERSION +#define EXT4_IOC_GETRSVSZ _IOR('f', 5, long) +#define EXT4_IOC_SETRSVSZ _IOW('f', 6, long) +#define EXT4_IOC_GROUP_EXTEND _IOW('f', 7, unsigned long) +#define EXT4_IOC_GROUP_ADD _IOW('f', 8, struct ext4_new_group_input) +#define EXT4_IOC_MIGRATE _IO('f', 9) + /* note ioctl 10 reserved for an early version of the FIEMAP ioctl */ + /* note ioctl 11 reserved for filesystem-independent FIEMAP ioctl */ +#define EXT4_IOC_ALLOC_DA_BLKS _IO('f', 12) +#define EXT4_IOC_MOVE_EXT _IOWR('f', 15, struct move_extent) +#define EXT4_IOC_RESIZE_FS _IOW('f', 16, __u64) +#define EXT4_IOC_SWAP_BOOT _IO('f', 17) +#define EXT4_IOC_PRECACHE_EXTENTS _IO('f', 18) +/* ioctl codes 19--39 are reserved for fscrypt */ +#define EXT4_IOC_CLEAR_ES_CACHE _IO('f', 40) +#define EXT4_IOC_GETSTATE _IOW('f', 41, __u32) +#define EXT4_IOC_GET_ES_CACHE _IOWR('f', 42, struct fiemap) +#define EXT4_IOC_CHECKPOINT _IOW('f', 43, __u32) +#define EXT4_IOC_GETFSUUID _IOR('f', 44, struct fsuuid) +#define EXT4_IOC_SETFSUUID _IOW('f', 44, struct fsuuid) + +#define EXT4_IOC_SHUTDOWN _IOR('X', 125, __u32) + +/* + * ioctl commands in 32 bit emulation + */ +#define EXT4_IOC32_GETVERSION _IOR('f', 3, int) +#define EXT4_IOC32_SETVERSION _IOW('f', 4, int) +#define EXT4_IOC32_GETRSVSZ _IOR('f', 5, int) +#define EXT4_IOC32_SETRSVSZ _IOW('f', 6, int) +#define EXT4_IOC32_GROUP_EXTEND _IOW('f', 7, unsigned int) +#define EXT4_IOC32_GROUP_ADD _IOW('f', 8, struct compat_ext4_new_group_input) +#define EXT4_IOC32_GETVERSION_OLD FS_IOC32_GETVERSION +#define EXT4_IOC32_SETVERSION_OLD FS_IOC32_SETVERSION + +/* + * Flags returned by EXT4_IOC_GETSTATE + * + * We only expose to userspace a subset of the state flags in + * i_state_flags + */ +#define EXT4_STATE_FLAG_EXT_PRECACHED 0x00000001 +#define EXT4_STATE_FLAG_NEW 0x00000002 +#define EXT4_STATE_FLAG_NEWENTRY 0x00000004 +#define EXT4_STATE_FLAG_DA_ALLOC_CLOSE 0x00000008 + +/* + * Flags for ioctl EXT4_IOC_CHECKPOINT + */ +#define EXT4_IOC_CHECKPOINT_FLAG_DISCARD 0x1 +#define EXT4_IOC_CHECKPOINT_FLAG_ZEROOUT 0x2 +#define EXT4_IOC_CHECKPOINT_FLAG_DRY_RUN 0x4 +#define EXT4_IOC_CHECKPOINT_FLAG_VALID (EXT4_IOC_CHECKPOINT_FLAG_DISCARD | \ + EXT4_IOC_CHECKPOINT_FLAG_ZEROOUT | \ + EXT4_IOC_CHECKPOINT_FLAG_DRY_RUN) + +/* + * Structure for EXT4_IOC_GETFSUUID/EXT4_IOC_SETFSUUID + */ +struct fsuuid { + __u32 fsu_len; + __u32 fsu_flags; + __u8 fsu_uuid[]; +}; + +/* + * Structure for EXT4_IOC_MOVE_EXT + */ +struct move_extent { + __u32 reserved; /* should be zero */ + __u32 donor_fd; /* donor file descriptor */ + __u64 orig_start; /* logical start offset in block for orig */ + __u64 donor_start; /* logical start offset in block for donor */ + __u64 len; /* block length to be moved */ + __u64 moved_len; /* moved block length */ +}; + +/* + * Flags used by EXT4_IOC_SHUTDOWN + */ +#define EXT4_GOING_FLAGS_DEFAULT 0x0 /* going down */ +#define EXT4_GOING_FLAGS_LOGFLUSH 0x1 /* flush log but not data */ +#define EXT4_GOING_FLAGS_NOLOGFLUSH 0x2 /* don't flush log nor data */ + +/* Used to pass group descriptor data when online resize is done */ +struct ext4_new_group_input { + __u32 group; /* Group number for this data */ + __u64 block_bitmap; /* Absolute block number of block bitmap */ + __u64 inode_bitmap; /* Absolute block number of inode bitmap */ + __u64 inode_table; /* Absolute block number of inode table start */ + __u32 blocks_count; /* Total number of blocks in this group */ + __u16 reserved_blocks; /* Number of reserved blocks in this group */ + __u16 unused; +}; + +/* + * Returned by EXT4_IOC_GET_ES_CACHE as an additional possible flag. + * It indicates that the entry in extent status cache is for a hole. + */ +#define EXT4_FIEMAP_EXTENT_HOLE 0x08000000 + +#endif /* _UAPI_LINUX_EXT4_H */ diff --git a/include/uapi/linux/fcntl.h b/include/uapi/linux/fcntl.h index e8c07da58c9f..6c80f96049bd 100644 --- a/include/uapi/linux/fcntl.h +++ b/include/uapi/linux/fcntl.h @@ -112,4 +112,9 @@ #define AT_RECURSIVE 0x8000 /* Apply to the entire subtree */ +/* Flags for name_to_handle_at(2). We reuse AT_ flag space to save bits... */ +#define AT_HANDLE_FID AT_REMOVEDIR /* file handle is needed to + compare object identity and may not + be usable to open_by_handle_at(2) */ + #endif /* _UAPI_LINUX_FCNTL_H */ diff --git a/include/uapi/linux/firewire-cdev.h b/include/uapi/linux/firewire-cdev.h index 92be3ea3c6e0..1f2c9469f921 100644 --- a/include/uapi/linux/firewire-cdev.h +++ b/include/uapi/linux/firewire-cdev.h @@ -46,6 +46,12 @@ #define FW_CDEV_EVENT_PHY_PACKET_RECEIVED 0x08 #define FW_CDEV_EVENT_ISO_INTERRUPT_MULTICHANNEL 0x09 +/* available since kernel version 6.5 */ +#define FW_CDEV_EVENT_REQUEST3 0x0a +#define FW_CDEV_EVENT_RESPONSE2 0x0b +#define FW_CDEV_EVENT_PHY_PACKET_SENT2 0x0c +#define FW_CDEV_EVENT_PHY_PACKET_RECEIVED2 0x0d + /** * struct fw_cdev_event_common - Common part of all fw_cdev_event_* types * @closure: For arbitrary use by userspace @@ -103,6 +109,32 @@ struct fw_cdev_event_bus_reset { * @length: Data length, i.e. the response's payload size in bytes * @data: Payload data, if any * + * This event is sent instead of &fw_cdev_event_response if the kernel or the client implements + * ABI version <= 5. It has the lack of time stamp field comparing to &fw_cdev_event_response2. + */ +struct fw_cdev_event_response { + __u64 closure; + __u32 type; + __u32 rcode; + __u32 length; + __u32 data[]; +}; + +/** + * struct fw_cdev_event_response2 - Sent when a response packet was received + * @closure: See &fw_cdev_event_common; set by %FW_CDEV_IOC_SEND_REQUEST + * or %FW_CDEV_IOC_SEND_BROADCAST_REQUEST + * or %FW_CDEV_IOC_SEND_STREAM_PACKET ioctl + * @type: See &fw_cdev_event_common; always %FW_CDEV_EVENT_RESPONSE + * @rcode: Response code returned by the remote node + * @length: Data length, i.e. the response's payload size in bytes + * @request_tstamp: The time stamp of isochronous cycle at which the request was sent. + * @response_tstamp: The time stamp of isochronous cycle at which the response was sent. + * @padding: Padding to keep the size of structure as multiples of 8 in various architectures + * since 4 byte alignment is used for 8 byte of object type in System V ABI for i386 + * architecture. + * @data: Payload data, if any + * * This event is sent when the stack receives a response to an outgoing request * sent by %FW_CDEV_IOC_SEND_REQUEST ioctl. The payload data for responses * carrying data (read and lock responses) follows immediately and can be @@ -112,12 +144,21 @@ struct fw_cdev_event_bus_reset { * involve response packets. This includes unified write transactions, * broadcast write transactions, and transmission of asynchronous stream * packets. @rcode indicates success or failure of such transmissions. + * + * The value of @request_tstamp expresses the isochronous cycle at which the request was sent to + * initiate the transaction. The value of @response_tstamp expresses the isochronous cycle at which + * the response arrived to complete the transaction. Each value is unsigned 16 bit integer + * containing three low order bits of second field and all 13 bits of cycle field in format of + * CYCLE_TIMER register. */ -struct fw_cdev_event_response { +struct fw_cdev_event_response2 { __u64 closure; __u32 type; __u32 rcode; __u32 length; + __u32 request_tstamp; + __u32 response_tstamp; + __u32 padding; __u32 data[]; }; @@ -159,6 +200,41 @@ struct fw_cdev_event_request { * @length: Data length, i.e. the request's payload size in bytes * @data: Incoming data, if any * + * This event is sent instead of &fw_cdev_event_request3 if the kernel or the client implements + * ABI version <= 5. It has the lack of time stamp field comparing to &fw_cdev_event_request3. + */ +struct fw_cdev_event_request2 { + __u64 closure; + __u32 type; + __u32 tcode; + __u64 offset; + __u32 source_node_id; + __u32 destination_node_id; + __u32 card; + __u32 generation; + __u32 handle; + __u32 length; + __u32 data[]; +}; + +/** + * struct fw_cdev_event_request3 - Sent on incoming request to an address region + * @closure: See &fw_cdev_event_common; set by %FW_CDEV_IOC_ALLOCATE ioctl + * @type: See &fw_cdev_event_common; always %FW_CDEV_EVENT_REQUEST2 + * @tcode: Transaction code of the incoming request + * @offset: The offset into the 48-bit per-node address space + * @source_node_id: Sender node ID + * @destination_node_id: Destination node ID + * @card: The index of the card from which the request came + * @generation: Bus generation in which the request is valid + * @handle: Reference to the kernel-side pending request + * @length: Data length, i.e. the request's payload size in bytes + * @tstamp: The time stamp of isochronous cycle at which the request arrived. + * @padding: Padding to keep the size of structure as multiples of 8 in various architectures + * since 4 byte alignment is used for 8 byte of object type in System V ABI for i386 + * architecture. + * @data: Incoming data, if any + * * This event is sent when the stack receives an incoming request to an address * region registered using the %FW_CDEV_IOC_ALLOCATE ioctl. The request is * guaranteed to be completely contained in the specified region. Userspace is @@ -191,10 +267,14 @@ struct fw_cdev_event_request { * sent. * * If the client subsequently needs to initiate requests to the sender node of - * an &fw_cdev_event_request2, it needs to use a device file with matching + * an &fw_cdev_event_request3, it needs to use a device file with matching * card index, node ID, and generation for outbound requests. + * + * @tstamp is isochronous cycle at which the request arrived. It is 16 bit integer value and the + * higher 3 bits expresses three low order bits of second field in the format of CYCLE_TIME + * register and the rest 13 bits expresses cycle field. */ -struct fw_cdev_event_request2 { +struct fw_cdev_event_request3 { __u64 closure; __u32 type; __u32 tcode; @@ -205,6 +285,8 @@ struct fw_cdev_event_request2 { __u32 generation; __u32 handle; __u32 length; + __u32 tstamp; + __u32 padding; __u32 data[]; }; @@ -341,20 +423,59 @@ struct fw_cdev_event_iso_resource { * @type: %FW_CDEV_EVENT_PHY_PACKET_SENT or %..._RECEIVED * @rcode: %RCODE_..., indicates success or failure of transmission * @length: Data length in bytes + * @data: Incoming data for %FW_CDEV_IOC_RECEIVE_PHY_PACKETS. For %FW_CDEV_IOC_SEND_PHY_PACKET + * the field has the same data in the request, thus the length of 8 bytes. + * + * This event is sent instead of &fw_cdev_event_phy_packet2 if the kernel or + * the client implements ABI version <= 5. It has the lack of time stamp field comparing to + * &fw_cdev_event_phy_packet2. + */ +struct fw_cdev_event_phy_packet { + __u64 closure; + __u32 type; + __u32 rcode; + __u32 length; + __u32 data[]; +}; + +/** + * struct fw_cdev_event_phy_packet2 - A PHY packet was transmitted or received with time stamp. + * @closure: See &fw_cdev_event_common; set by %FW_CDEV_IOC_SEND_PHY_PACKET + * or %FW_CDEV_IOC_RECEIVE_PHY_PACKETS ioctl + * @type: %FW_CDEV_EVENT_PHY_PACKET_SENT2 or %FW_CDEV_EVENT_PHY_PACKET_RECEIVED2 + * @rcode: %RCODE_..., indicates success or failure of transmission + * @length: Data length in bytes + * @tstamp: For %FW_CDEV_EVENT_PHY_PACKET_RECEIVED2, the time stamp of isochronous cycle at + * which the packet arrived. For %FW_CDEV_EVENT_PHY_PACKET_SENT2 and non-ping packet, + * the time stamp of isochronous cycle at which the packet was sent. For ping packet, + * the tick count for round-trip time measured by 1394 OHCI controller. + * The time stamp of isochronous cycle at which either the response was sent for + * %FW_CDEV_EVENT_PHY_PACKET_SENT2 or the request arrived for + * %FW_CDEV_EVENT_PHY_PACKET_RECEIVED2. * @data: Incoming data * - * If @type is %FW_CDEV_EVENT_PHY_PACKET_SENT, @length is 0 and @data empty, - * except in case of a ping packet: Then, @length is 4, and @data[0] is the - * ping time in 49.152MHz clocks if @rcode is %RCODE_COMPLETE. + * If @type is %FW_CDEV_EVENT_PHY_PACKET_SENT2, @length is 8 and @data consists of the two PHY + * packet quadlets to be sent, in host byte order, * - * If @type is %FW_CDEV_EVENT_PHY_PACKET_RECEIVED, @length is 8 and @data - * consists of the two PHY packet quadlets, in host byte order. + * If @type is %FW_CDEV_EVENT_PHY_PACKET_RECEIVED2, @length is 8 and @data consists of the two PHY + * packet quadlets, in host byte order. + * + * For %FW_CDEV_EVENT_PHY_PACKET_RECEIVED2, the @tstamp is the isochronous cycle at which the + * packet arrived. It is 16 bit integer value and the higher 3 bits expresses three low order bits + * of second field and the rest 13 bits expresses cycle field in the format of CYCLE_TIME register. + * + * For %FW_CDEV_EVENT_PHY_PACKET_SENT2, the @tstamp has different meanings whether to sent the + * packet for ping or not. If it's not for ping, the @tstamp is the isochronous cycle at which the + * packet was sent, and use the same format as the case of %FW_CDEV_EVENT_PHY_PACKET_SENT2. If it's + * for ping, the @tstamp is for round-trip time measured by 1394 OHCI controller with 42.195 MHz + * resolution. */ -struct fw_cdev_event_phy_packet { +struct fw_cdev_event_phy_packet2 { __u64 closure; __u32 type; __u32 rcode; __u32 length; + __u32 tstamp; __u32 data[]; }; @@ -375,6 +496,11 @@ struct fw_cdev_event_phy_packet { * %FW_CDEV_EVENT_PHY_PACKET_SENT or * %FW_CDEV_EVENT_PHY_PACKET_RECEIVED * + * @request3: Valid if @common.type == %FW_CDEV_EVENT_REQUEST3 + * @response2: Valid if @common.type == %FW_CDEV_EVENT_RESPONSE2 + * @phy_packet2: Valid if @common.type == %FW_CDEV_EVENT_PHY_PACKET_SENT2 or + * %FW_CDEV_EVENT_PHY_PACKET_RECEIVED2 + * * Convenience union for userspace use. Events could be read(2) into an * appropriately aligned char buffer and then cast to this union for further * processing. Note that for a request, response or iso_interrupt event, @@ -393,6 +519,9 @@ union fw_cdev_event { struct fw_cdev_event_iso_interrupt_mc iso_interrupt_mc; /* added in 2.6.36 */ struct fw_cdev_event_iso_resource iso_resource; /* added in 2.6.30 */ struct fw_cdev_event_phy_packet phy_packet; /* added in 2.6.36 */ + struct fw_cdev_event_request3 request3; /* added in 6.5 */ + struct fw_cdev_event_response2 response2; /* added in 6.5 */ + struct fw_cdev_event_phy_packet2 phy_packet2; /* added in 6.5 */ }; /* available since kernel version 2.6.22 */ @@ -457,6 +586,11 @@ union fw_cdev_event { * 5 (3.4) - send %FW_CDEV_EVENT_ISO_INTERRUPT events when needed to * avoid dropping data * - added %FW_CDEV_IOC_FLUSH_ISO + * 6 (6.5) - added some event for subactions of asynchronous transaction with time stamp + * - %FW_CDEV_EVENT_REQUEST3 + * - %FW_CDEV_EVENT_RESPONSE2 + * - %FW_CDEV_EVENT_PHY_PACKET_SENT2 + * - %FW_CDEV_EVENT_PHY_PACKET_RECEIVED2 */ /** @@ -502,11 +636,11 @@ struct fw_cdev_get_info { * @data: Userspace pointer to payload * @generation: The bus generation where packet is valid * - * Send a request to the device. This ioctl implements all outgoing requests. - * Both quadlet and block request specify the payload as a pointer to the data - * in the @data field. Once the transaction completes, the kernel writes an - * &fw_cdev_event_response event back. The @closure field is passed back to - * user space in the response event. + * Send a request to the device. This ioctl implements all outgoing requests. Both quadlet and + * block request specify the payload as a pointer to the data in the @data field. Once the + * transaction completes, the kernel writes either &fw_cdev_event_response event or + * &fw_cdev_event_response event back. The @closure field is passed back to user space in the + * response event. */ struct fw_cdev_send_request { __u32 tcode; @@ -989,10 +1123,9 @@ struct fw_cdev_allocate_iso_resource { * @generation: The bus generation where packet is valid * @speed: Speed to transmit at * - * The %FW_CDEV_IOC_SEND_STREAM_PACKET ioctl sends an asynchronous stream packet - * to every device which is listening to the specified channel. The kernel - * writes an &fw_cdev_event_response event which indicates success or failure of - * the transmission. + * The %FW_CDEV_IOC_SEND_STREAM_PACKET ioctl sends an asynchronous stream packet to every device + * which is listening to the specified channel. The kernel writes either &fw_cdev_event_response + * event or &fw_cdev_event_response2 event which indicates success or failure of the transmission. */ struct fw_cdev_send_stream_packet { __u32 length; @@ -1011,8 +1144,8 @@ struct fw_cdev_send_stream_packet { * @data: First and second quadlet of the PHY packet * @generation: The bus generation where packet is valid * - * The %FW_CDEV_IOC_SEND_PHY_PACKET ioctl sends a PHY packet to all nodes - * on the same card as this device. After transmission, an + * The %FW_CDEV_IOC_SEND_PHY_PACKET ioctl sends a PHY packet to all nodes on the same card as this + * device. After transmission, either %FW_CDEV_EVENT_PHY_PACKET_SENT event or * %FW_CDEV_EVENT_PHY_PACKET_SENT event is generated. * * The payload @data\[\] shall be specified in host byte order. Usually, @@ -1031,8 +1164,9 @@ struct fw_cdev_send_phy_packet { * struct fw_cdev_receive_phy_packets - start reception of PHY packets * @closure: Passed back to userspace in phy packet events * - * This ioctl activates issuing of %FW_CDEV_EVENT_PHY_PACKET_RECEIVED due to - * incoming PHY packets from any node on the same bus as the device. + * This ioctl activates issuing of either %FW_CDEV_EVENT_PHY_PACKET_RECEIVED or + * %FW_CDEV_EVENT_PHY_PACKET_RECEIVED2 due to incoming PHY packets from any node on the same bus + * as the device. * * The ioctl is only permitted on device files which represent a local node. */ diff --git a/include/uapi/linux/fsi.h b/include/uapi/linux/fsi.h index b2f1977378c7..a2e730fc6309 100644 --- a/include/uapi/linux/fsi.h +++ b/include/uapi/linux/fsi.h @@ -60,6 +60,16 @@ struct scom_access { */ /** + * FSI_SBEFIFO_CMD_TIMEOUT sets the timeout for writing data to the SBEFIFO. + * + * The command timeout is specified in seconds. The minimum value of command + * timeout is 1 seconds (default) and the maximum value of command timeout is + * 120 seconds. A command timeout of 0 will reset the value to the default of + * 1 seconds. + */ +#define FSI_SBEFIFO_CMD_TIMEOUT_SECONDS _IOW('s', 0x01, __u32) + +/** * FSI_SBEFIFO_READ_TIMEOUT sets the read timeout for response from SBE. * * The read timeout is specified in seconds. The minimum value of read diff --git a/include/uapi/linux/fuse.h b/include/uapi/linux/fuse.h index 1b9d0dfae72d..b3fcab13fcd3 100644 --- a/include/uapi/linux/fuse.h +++ b/include/uapi/linux/fuse.h @@ -206,6 +206,7 @@ * - add extension header * - add FUSE_EXT_GROUPS * - add FUSE_CREATE_SUPP_GROUP + * - add FUSE_HAS_EXPIRE_ONLY */ #ifndef _LINUX_FUSE_H @@ -369,6 +370,7 @@ struct fuse_file_lock { * FUSE_HAS_INODE_DAX: use per inode DAX * FUSE_CREATE_SUPP_GROUP: add supplementary group info to create, mkdir, * symlink and mknod (single group that matches parent) + * FUSE_HAS_EXPIRE_ONLY: kernel supports expiry-only entry invalidation */ #define FUSE_ASYNC_READ (1 << 0) #define FUSE_POSIX_LOCKS (1 << 1) @@ -406,6 +408,7 @@ struct fuse_file_lock { #define FUSE_SECURITY_CTX (1ULL << 32) #define FUSE_HAS_INODE_DAX (1ULL << 33) #define FUSE_CREATE_SUPP_GROUP (1ULL << 34) +#define FUSE_HAS_EXPIRE_ONLY (1ULL << 35) /** * CUSE INIT request/reply flags diff --git a/include/uapi/linux/gsmmux.h b/include/uapi/linux/gsmmux.h index a703780aa095..4c878d84dbda 100644 --- a/include/uapi/linux/gsmmux.h +++ b/include/uapi/linux/gsmmux.h @@ -2,10 +2,45 @@ #ifndef _LINUX_GSMMUX_H #define _LINUX_GSMMUX_H +#include <linux/const.h> #include <linux/if.h> #include <linux/ioctl.h> #include <linux/types.h> +/* + * flags definition for n_gsm + * + * Used by: + * struct gsm_config_ext.flags + * struct gsm_dlci_config.flags + */ +/* Forces a DLCI reset if set. Otherwise, a DLCI reset is only done if + * incompatible settings were provided. Always cleared on retrieval. + */ +#define GSM_FL_RESTART _BITUL(0) + +/** + * struct gsm_config - n_gsm basic configuration parameters + * + * This structure is used in combination with GSMIOC_GETCONF and GSMIOC_SETCONF + * to retrieve and set the basic parameters of an n_gsm ldisc. + * struct gsm_config_ext can be used to configure extended ldisc parameters. + * + * All timers are in units of 1/100th of a second. + * + * @adaption: Convergence layer type + * @encapsulation: Framing (0 = basic option, 1 = advanced option) + * @initiator: Initiator or responder + * @t1: Acknowledgment timer + * @t2: Response timer for multiplexer control channel + * @t3: Response timer for wake-up procedure + * @n2: Maximum number of retransmissions + * @mru: Maximum incoming frame payload size + * @mtu: Maximum outgoing frame payload size + * @k: Window size + * @i: Frame type (1 = UIH, 2 = UI) + * @unused: Can not be used + */ struct gsm_config { unsigned int adaption; @@ -19,18 +54,32 @@ struct gsm_config unsigned int mtu; unsigned int k; unsigned int i; - unsigned int unused[8]; /* Can not be used */ + unsigned int unused[8]; }; #define GSMIOC_GETCONF _IOR('G', 0, struct gsm_config) #define GSMIOC_SETCONF _IOW('G', 1, struct gsm_config) +/** + * struct gsm_netconfig - n_gsm network configuration parameters + * + * This structure is used in combination with GSMIOC_ENABLE_NET and + * GSMIOC_DISABLE_NET to enable or disable a network data connection + * over a mux virtual tty channel. This is for modems that support + * data connections with raw IP frames instead of PPP. + * + * @adaption: Adaption to use in network mode. + * @protocol: Protocol to use - only ETH_P_IP supported. + * @unused2: Can not be used. + * @if_name: Interface name format string. + * @unused: Can not be used. + */ struct gsm_netconfig { - unsigned int adaption; /* Adaption to use in network mode */ - unsigned short protocol;/* Protocol to use - only ETH_P_IP supported */ - unsigned short unused2; /* Can not be used */ - char if_name[IFNAMSIZ]; /* interface name format string */ - __u8 unused[28]; /* Can not be used */ + unsigned int adaption; + unsigned short protocol; + unsigned short unused2; + char if_name[IFNAMSIZ]; + __u8 unused[28]; }; #define GSMIOC_ENABLE_NET _IOW('G', 2, struct gsm_netconfig) @@ -39,14 +88,60 @@ struct gsm_netconfig { /* get the base tty number for a configured gsmmux tty */ #define GSMIOC_GETFIRST _IOR('G', 4, __u32) +/** + * struct gsm_config_ext - n_gsm extended configuration parameters + * + * This structure is used in combination with GSMIOC_GETCONF_EXT and + * GSMIOC_SETCONF_EXT to retrieve and set the extended parameters of an + * n_gsm ldisc. + * + * All timers are in units of 1/100th of a second. + * + * @keep_alive: Control channel keep-alive in 1/100th of a second (0 to disable). + * @wait_config: Wait for DLCI config before opening virtual link? + * @flags: Mux specific flags. + * @reserved: For future use, must be initialized to zero. + */ struct gsm_config_ext { - __u32 keep_alive; /* Control channel keep-alive in 1/100th of a - * second (0 to disable) - */ - __u32 reserved[7]; /* For future use, must be initialized to zero */ + __u32 keep_alive; + __u32 wait_config; + __u32 flags; + __u32 reserved[5]; }; #define GSMIOC_GETCONF_EXT _IOR('G', 5, struct gsm_config_ext) #define GSMIOC_SETCONF_EXT _IOW('G', 6, struct gsm_config_ext) +/** + * struct gsm_dlci_config - n_gsm channel configuration parameters + * + * This structure is used in combination with GSMIOC_GETCONF_DLCI and + * GSMIOC_SETCONF_DLCI to retrieve and set the channel specific parameters + * of an n_gsm ldisc. + * + * Set the channel accordingly before calling GSMIOC_GETCONF_DLCI. + * + * @channel: DLCI (0 for the associated DLCI). + * @adaption: Convergence layer type. + * @mtu: Maximum transfer unit. + * @priority: Priority (0 for default value). + * @i: Frame type (1 = UIH, 2 = UI). + * @k: Window size (0 for default value). + * @flags: DLCI specific flags. + * @reserved: For future use, must be initialized to zero. + */ +struct gsm_dlci_config { + __u32 channel; + __u32 adaption; + __u32 mtu; + __u32 priority; + __u32 i; + __u32 k; + __u32 flags; + __u32 reserved[7]; +}; + +#define GSMIOC_GETCONF_DLCI _IOWR('G', 7, struct gsm_dlci_config) +#define GSMIOC_SETCONF_DLCI _IOW('G', 8, struct gsm_dlci_config) + #endif diff --git a/include/uapi/linux/handshake.h b/include/uapi/linux/handshake.h new file mode 100644 index 000000000000..3d7ea58778c9 --- /dev/null +++ b/include/uapi/linux/handshake.h @@ -0,0 +1,74 @@ +/* SPDX-License-Identifier: ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) */ +/* Do not edit directly, auto-generated from: */ +/* Documentation/netlink/specs/handshake.yaml */ +/* YNL-GEN uapi header */ + +#ifndef _UAPI_LINUX_HANDSHAKE_H +#define _UAPI_LINUX_HANDSHAKE_H + +#define HANDSHAKE_FAMILY_NAME "handshake" +#define HANDSHAKE_FAMILY_VERSION 1 + +enum handshake_handler_class { + HANDSHAKE_HANDLER_CLASS_NONE, + HANDSHAKE_HANDLER_CLASS_TLSHD, + HANDSHAKE_HANDLER_CLASS_MAX, +}; + +enum handshake_msg_type { + HANDSHAKE_MSG_TYPE_UNSPEC, + HANDSHAKE_MSG_TYPE_CLIENTHELLO, + HANDSHAKE_MSG_TYPE_SERVERHELLO, +}; + +enum handshake_auth { + HANDSHAKE_AUTH_UNSPEC, + HANDSHAKE_AUTH_UNAUTH, + HANDSHAKE_AUTH_PSK, + HANDSHAKE_AUTH_X509, +}; + +enum { + HANDSHAKE_A_X509_CERT = 1, + HANDSHAKE_A_X509_PRIVKEY, + + __HANDSHAKE_A_X509_MAX, + HANDSHAKE_A_X509_MAX = (__HANDSHAKE_A_X509_MAX - 1) +}; + +enum { + HANDSHAKE_A_ACCEPT_SOCKFD = 1, + HANDSHAKE_A_ACCEPT_HANDLER_CLASS, + HANDSHAKE_A_ACCEPT_MESSAGE_TYPE, + HANDSHAKE_A_ACCEPT_TIMEOUT, + HANDSHAKE_A_ACCEPT_AUTH_MODE, + HANDSHAKE_A_ACCEPT_PEER_IDENTITY, + HANDSHAKE_A_ACCEPT_CERTIFICATE, + HANDSHAKE_A_ACCEPT_PEERNAME, + + __HANDSHAKE_A_ACCEPT_MAX, + HANDSHAKE_A_ACCEPT_MAX = (__HANDSHAKE_A_ACCEPT_MAX - 1) +}; + +enum { + HANDSHAKE_A_DONE_STATUS = 1, + HANDSHAKE_A_DONE_SOCKFD, + HANDSHAKE_A_DONE_REMOTE_AUTH, + + __HANDSHAKE_A_DONE_MAX, + HANDSHAKE_A_DONE_MAX = (__HANDSHAKE_A_DONE_MAX - 1) +}; + +enum { + HANDSHAKE_CMD_READY = 1, + HANDSHAKE_CMD_ACCEPT, + HANDSHAKE_CMD_DONE, + + __HANDSHAKE_CMD_MAX, + HANDSHAKE_CMD_MAX = (__HANDSHAKE_CMD_MAX - 1) +}; + +#define HANDSHAKE_MCGRP_NONE "none" +#define HANDSHAKE_MCGRP_TLSHD "tlshd" + +#endif /* _UAPI_LINUX_HANDSHAKE_H */ diff --git a/include/uapi/linux/idxd.h b/include/uapi/linux/idxd.h index 1d553bedbdb5..606b52e88ce3 100644 --- a/include/uapi/linux/idxd.h +++ b/include/uapi/linux/idxd.h @@ -30,6 +30,7 @@ enum idxd_scmd_stat { IDXD_SCMD_WQ_NO_PRIV = 0x800f0000, IDXD_SCMD_WQ_IRQ_ERR = 0x80100000, IDXD_SCMD_WQ_USER_NO_IOMMU = 0x80110000, + IDXD_SCMD_DEV_EVL_ERR = 0x80120000, }; #define IDXD_SCMD_SOFTERR_MASK 0x80000000 @@ -72,12 +73,14 @@ enum dsa_opcode { DSA_OPCODE_CR_DELTA, DSA_OPCODE_AP_DELTA, DSA_OPCODE_DUALCAST, + DSA_OPCODE_TRANSL_FETCH, DSA_OPCODE_CRCGEN = 0x10, DSA_OPCODE_COPY_CRC, DSA_OPCODE_DIF_CHECK, DSA_OPCODE_DIF_INS, DSA_OPCODE_DIF_STRP, DSA_OPCODE_DIF_UPDT, + DSA_OPCODE_DIX_GEN = 0x17, DSA_OPCODE_CFLUSH = 0x20, }; @@ -132,6 +135,8 @@ enum dsa_completion_status { DSA_COMP_HW_ERR1, DSA_COMP_HW_ERR_DRB, DSA_COMP_TRANSLATION_FAIL, + DSA_COMP_DRAIN_EVL = 0x26, + DSA_COMP_BATCH_EVL_ERR, }; enum iax_completion_status { @@ -167,6 +172,7 @@ enum iax_completion_status { #define DSA_COMP_STATUS_MASK 0x7f #define DSA_COMP_STATUS_WRITE 0x80 +#define DSA_COMP_STATUS(status) ((status) & DSA_COMP_STATUS_MASK) struct dsa_hw_desc { uint32_t pasid:20; @@ -180,6 +186,8 @@ struct dsa_hw_desc { uint64_t rdback_addr; uint64_t pattern; uint64_t desc_list_addr; + uint64_t pattern_lower; + uint64_t transl_fetch_addr; }; union { uint64_t dst_addr; @@ -190,6 +198,7 @@ struct dsa_hw_desc { union { uint32_t xfer_size; uint32_t desc_count; + uint32_t region_size; }; uint16_t int_handle; uint16_t rsvd1; @@ -244,6 +253,26 @@ struct dsa_hw_desc { uint16_t dest_app_tag_seed; }; + /* Fill */ + uint64_t pattern_upper; + + /* Translation fetch */ + struct { + uint64_t transl_fetch_res; + uint32_t region_stride; + }; + + /* DIX generate */ + struct { + uint8_t dix_gen_res; + uint8_t dest_dif_flags; + uint8_t dif_flags; + uint8_t dix_gen_res2[13]; + uint32_t ref_tag_seed; + uint16_t app_tag_mask; + uint16_t app_tag_seed; + }; + uint8_t op_specific[24]; }; } __attribute__((packed)); @@ -284,8 +313,12 @@ struct dsa_completion_record { uint8_t result; uint8_t dif_status; }; - uint16_t rsvd; - uint32_t bytes_completed; + uint8_t fault_info; + uint8_t rsvd; + union { + uint32_t bytes_completed; + uint32_t descs_completed; + }; uint64_t fault_addr; union { /* common record */ @@ -322,6 +355,14 @@ struct dsa_completion_record { uint16_t dif_upd_dest_app_tag; }; + /* DIX generate */ + struct { + uint64_t dix_gen_res; + uint32_t dix_ref_tag; + uint16_t dix_app_tag_mask; + uint16_t dix_app_tag; + }; + uint8_t op_specific[16]; }; } __attribute__((packed)); @@ -333,7 +374,8 @@ struct dsa_raw_completion_record { struct iax_completion_record { volatile uint8_t status; uint8_t error_code; - uint16_t rsvd; + uint8_t fault_info; + uint8_t rsvd; uint32_t bytes_completed; uint64_t fault_addr; uint32_t invalid_flags; diff --git a/include/uapi/linux/if_bridge.h b/include/uapi/linux/if_bridge.h index d60c456710b3..f95326fce6bb 100644 --- a/include/uapi/linux/if_bridge.h +++ b/include/uapi/linux/if_bridge.h @@ -525,6 +525,7 @@ enum { BRIDGE_VLANDB_ENTRY_MCAST_ROUTER, BRIDGE_VLANDB_ENTRY_MCAST_N_GROUPS, BRIDGE_VLANDB_ENTRY_MCAST_MAX_GROUPS, + BRIDGE_VLANDB_ENTRY_NEIGH_SUPPRESS, __BRIDGE_VLANDB_ENTRY_MAX, }; #define BRIDGE_VLANDB_ENTRY_MAX (__BRIDGE_VLANDB_ENTRY_MAX - 1) @@ -633,6 +634,11 @@ enum { MDBA_MDB_EATTR_GROUP_MODE, MDBA_MDB_EATTR_SOURCE, MDBA_MDB_EATTR_RTPROT, + MDBA_MDB_EATTR_DST, + MDBA_MDB_EATTR_DST_PORT, + MDBA_MDB_EATTR_VNI, + MDBA_MDB_EATTR_IFINDEX, + MDBA_MDB_EATTR_SRC_VNI, __MDBA_MDB_EATTR_MAX }; #define MDBA_MDB_EATTR_MAX (__MDBA_MDB_EATTR_MAX - 1) @@ -728,6 +734,11 @@ enum { MDBE_ATTR_SRC_LIST, MDBE_ATTR_GROUP_MODE, MDBE_ATTR_RTPROT, + MDBE_ATTR_DST, + MDBE_ATTR_DST_PORT, + MDBE_ATTR_VNI, + MDBE_ATTR_IFINDEX, + MDBE_ATTR_SRC_VNI, __MDBE_ATTR_MAX, }; #define MDBE_ATTR_MAX (__MDBE_ATTR_MAX - 1) diff --git a/include/uapi/linux/if_link.h b/include/uapi/linux/if_link.h index 57ceb788250f..ce3117df9cec 100644 --- a/include/uapi/linux/if_link.h +++ b/include/uapi/linux/if_link.h @@ -569,6 +569,8 @@ enum { IFLA_BRPORT_MAB, IFLA_BRPORT_MCAST_N_GROUPS, IFLA_BRPORT_MCAST_MAX_GROUPS, + IFLA_BRPORT_NEIGH_VLAN_SUPPRESS, + IFLA_BRPORT_BACKUP_NHID, __IFLA_BRPORT_MAX }; #define IFLA_BRPORT_MAX (__IFLA_BRPORT_MAX - 1) @@ -635,6 +637,7 @@ enum { IFLA_MACVLAN_MACADDR_COUNT, IFLA_MACVLAN_BC_QUEUE_LEN, IFLA_MACVLAN_BC_QUEUE_LEN_USED, + IFLA_MACVLAN_BC_CUTOFF, __IFLA_MACVLAN_MAX, }; @@ -826,6 +829,7 @@ enum { IFLA_VXLAN_TTL_INHERIT, IFLA_VXLAN_DF, IFLA_VXLAN_VNIFILTER, /* only applicable with COLLECT_METADATA mode */ + IFLA_VXLAN_LOCALBYPASS, __IFLA_VXLAN_MAX }; #define IFLA_VXLAN_MAX (__IFLA_VXLAN_MAX - 1) diff --git a/include/uapi/linux/if_packet.h b/include/uapi/linux/if_packet.h index 78c981d6a9d4..4d0ad22f83b5 100644 --- a/include/uapi/linux/if_packet.h +++ b/include/uapi/linux/if_packet.h @@ -18,7 +18,11 @@ struct sockaddr_ll { unsigned short sll_hatype; unsigned char sll_pkttype; unsigned char sll_halen; - unsigned char sll_addr[8]; + union { + unsigned char sll_addr[8]; + /* Actual length is in sll_halen. */ + __DECLARE_FLEX_ARRAY(unsigned char, sll_addr_flex); + }; }; /* Packet types */ @@ -59,6 +63,7 @@ struct sockaddr_ll { #define PACKET_ROLLOVER_STATS 21 #define PACKET_FANOUT_DATA 22 #define PACKET_IGNORE_OUTGOING 23 +#define PACKET_VNET_HDR_SZ 24 #define PACKET_FANOUT_HASH 0 #define PACKET_FANOUT_LB 1 diff --git a/include/uapi/linux/if_xdp.h b/include/uapi/linux/if_xdp.h index a78a8096f4ce..8d48863472b9 100644 --- a/include/uapi/linux/if_xdp.h +++ b/include/uapi/linux/if_xdp.h @@ -25,6 +25,12 @@ * application. */ #define XDP_USE_NEED_WAKEUP (1 << 3) +/* By setting this option, userspace application indicates that it can + * handle multiple descriptors per packet thus enabling AF_XDP to split + * multi-buffer XDP frames into multiple Rx descriptors. Without this set + * such frames will be dropped. + */ +#define XDP_USE_SG (1 << 4) /* Flags for xsk_umem_config flags */ #define XDP_UMEM_UNALIGNED_CHUNK_FLAG (1 << 0) @@ -108,4 +114,11 @@ struct xdp_desc { /* UMEM descriptor is __u64 */ +/* Flag indicating that the packet continues with the buffer pointed out by the + * next frame in the ring. The end of the packet is signalled by setting this + * bit to zero. For single buffer packets, every descriptor has 'options' set + * to 0 and this maintains backward compatibility. + */ +#define XDP_PKT_CONTD (1 << 0) + #endif /* _LINUX_IF_XDP_H */ diff --git a/include/uapi/linux/in.h b/include/uapi/linux/in.h index 4b7f2df66b99..e682ab628dfa 100644 --- a/include/uapi/linux/in.h +++ b/include/uapi/linux/in.h @@ -163,6 +163,7 @@ struct in_addr { #define IP_MULTICAST_ALL 49 #define IP_UNICAST_IF 50 #define IP_LOCAL_PORT_RANGE 51 +#define IP_PROTOCOL 52 #define MCAST_EXCLUDE 0 #define MCAST_INCLUDE 1 diff --git a/include/uapi/linux/io_uring.h b/include/uapi/linux/io_uring.h index 709de6d4feb2..8e61f8b7c2ce 100644 --- a/include/uapi/linux/io_uring.h +++ b/include/uapi/linux/io_uring.h @@ -173,6 +173,23 @@ enum { */ #define IORING_SETUP_DEFER_TASKRUN (1U << 13) +/* + * Application provides the memory for the rings + */ +#define IORING_SETUP_NO_MMAP (1U << 14) + +/* + * Register the ring fd in itself for use with + * IORING_REGISTER_USE_REGISTERED_RING; return a registered fd index rather + * than an fd. + */ +#define IORING_SETUP_REGISTERED_FD_ONLY (1U << 15) + +/* + * Removes indirection through the SQ index array. + */ +#define IORING_SETUP_NO_SQARRAY (1U << 16) + enum io_uring_op { IORING_OP_NOP, IORING_OP_READV, @@ -232,8 +249,10 @@ enum io_uring_op { * sqe->uring_cmd_flags * IORING_URING_CMD_FIXED use registered buffer; pass this flag * along with setting sqe->buf_index. + * IORING_URING_CMD_POLLED driver use only */ #define IORING_URING_CMD_FIXED (1U << 0) +#define IORING_URING_CMD_POLLED (1U << 31) /* @@ -250,6 +269,7 @@ enum io_uring_op { #define IORING_TIMEOUT_REALTIME (1U << 3) #define IORING_LINK_TIMEOUT_UPDATE (1U << 4) #define IORING_TIMEOUT_ETIME_SUCCESS (1U << 5) +#define IORING_TIMEOUT_MULTISHOT (1U << 6) #define IORING_TIMEOUT_CLOCK_MASK (IORING_TIMEOUT_BOOTTIME | IORING_TIMEOUT_REALTIME) #define IORING_TIMEOUT_UPDATE_MASK (IORING_TIMEOUT_UPDATE | IORING_LINK_TIMEOUT_UPDATE) /* @@ -284,11 +304,15 @@ enum io_uring_op { * request 'user_data' * IORING_ASYNC_CANCEL_ANY Match any request * IORING_ASYNC_CANCEL_FD_FIXED 'fd' passed in is a fixed descriptor + * IORING_ASYNC_CANCEL_USERDATA Match on user_data, default for no other key + * IORING_ASYNC_CANCEL_OP Match request based on opcode */ #define IORING_ASYNC_CANCEL_ALL (1U << 0) #define IORING_ASYNC_CANCEL_FD (1U << 1) #define IORING_ASYNC_CANCEL_ANY (1U << 2) #define IORING_ASYNC_CANCEL_FD_FIXED (1U << 3) +#define IORING_ASYNC_CANCEL_USERDATA (1U << 4) +#define IORING_ASYNC_CANCEL_OP (1U << 5) /* * send/sendmsg and recv/recvmsg flags (sqe->ioprio) @@ -389,6 +413,9 @@ enum { #define IORING_OFF_SQ_RING 0ULL #define IORING_OFF_CQ_RING 0x8000000ULL #define IORING_OFF_SQES 0x10000000ULL +#define IORING_OFF_PBUF_RING 0x80000000ULL +#define IORING_OFF_PBUF_SHIFT 16 +#define IORING_OFF_MMAP_MASK 0xf8000000ULL /* * Filled with the offset for mmap(2) @@ -402,7 +429,7 @@ struct io_sqring_offsets { __u32 dropped; __u32 array; __u32 resv1; - __u64 resv2; + __u64 user_addr; }; /* @@ -421,7 +448,7 @@ struct io_cqring_offsets { __u32 cqes; __u32 flags; __u32 resv1; - __u64 resv2; + __u64 user_addr; }; /* @@ -568,19 +595,6 @@ struct io_uring_rsrc_update2 { __u32 resv2; }; -struct io_uring_notification_slot { - __u64 tag; - __u64 resv[3]; -}; - -struct io_uring_notification_register { - __u32 nr_slots; - __u32 resv; - __u64 resv2; - __u64 data; - __u64 resv3; -}; - /* Skip updating fd indexes set to this value in the fd table */ #define IORING_REGISTER_FILES_SKIP (-2) @@ -635,12 +649,26 @@ struct io_uring_buf_ring { }; }; +/* + * Flags for IORING_REGISTER_PBUF_RING. + * + * IOU_PBUF_RING_MMAP: If set, kernel will allocate the memory for the ring. + * The application must not set a ring_addr in struct + * io_uring_buf_reg, instead it must subsequently call + * mmap(2) with the offset set as: + * IORING_OFF_PBUF_RING | (bgid << IORING_OFF_PBUF_SHIFT) + * to get a virtual mapping for the ring. + */ +enum { + IOU_PBUF_RING_MMAP = 1, +}; + /* argument for IORING_(UN)REGISTER_PBUF_RING */ struct io_uring_buf_reg { __u64 ring_addr; __u32 ring_entries; __u16 bgid; - __u16 pad; + __u16 flags; __u64 resv[3]; }; @@ -678,7 +706,9 @@ struct io_uring_sync_cancel_reg { __s32 fd; __u32 flags; struct __kernel_timespec timeout; - __u64 pad[4]; + __u8 opcode; + __u8 pad[7]; + __u64 pad2[3]; }; /* @@ -698,6 +728,14 @@ struct io_uring_recvmsg_out { __u32 flags; }; +/* + * Argument for IORING_OP_URING_CMD when file is a socket + */ +enum { + SOCKET_URING_OP_SIOCINQ = 0, + SOCKET_URING_OP_SIOCOUTQ, +}; + #ifdef __cplusplus } #endif diff --git a/include/uapi/linux/iommufd.h b/include/uapi/linux/iommufd.h index 98ebba80cfa1..b4ba0c0cbab6 100644 --- a/include/uapi/linux/iommufd.h +++ b/include/uapi/linux/iommufd.h @@ -45,6 +45,8 @@ enum { IOMMUFD_CMD_IOAS_UNMAP, IOMMUFD_CMD_OPTION, IOMMUFD_CMD_VFIO_IOAS, + IOMMUFD_CMD_HWPT_ALLOC, + IOMMUFD_CMD_GET_HW_INFO, }; /** @@ -344,4 +346,99 @@ struct iommu_vfio_ioas { __u16 __reserved; }; #define IOMMU_VFIO_IOAS _IO(IOMMUFD_TYPE, IOMMUFD_CMD_VFIO_IOAS) + +/** + * struct iommu_hwpt_alloc - ioctl(IOMMU_HWPT_ALLOC) + * @size: sizeof(struct iommu_hwpt_alloc) + * @flags: Must be 0 + * @dev_id: The device to allocate this HWPT for + * @pt_id: The IOAS to connect this HWPT to + * @out_hwpt_id: The ID of the new HWPT + * @__reserved: Must be 0 + * + * Explicitly allocate a hardware page table object. This is the same object + * type that is returned by iommufd_device_attach() and represents the + * underlying iommu driver's iommu_domain kernel object. + * + * A HWPT will be created with the IOVA mappings from the given IOAS. + */ +struct iommu_hwpt_alloc { + __u32 size; + __u32 flags; + __u32 dev_id; + __u32 pt_id; + __u32 out_hwpt_id; + __u32 __reserved; +}; +#define IOMMU_HWPT_ALLOC _IO(IOMMUFD_TYPE, IOMMUFD_CMD_HWPT_ALLOC) + +/** + * struct iommu_hw_info_vtd - Intel VT-d hardware information + * + * @flags: Must be 0 + * @__reserved: Must be 0 + * + * @cap_reg: Value of Intel VT-d capability register defined in VT-d spec + * section 11.4.2 Capability Register. + * @ecap_reg: Value of Intel VT-d capability register defined in VT-d spec + * section 11.4.3 Extended Capability Register. + * + * User needs to understand the Intel VT-d specification to decode the + * register value. + */ +struct iommu_hw_info_vtd { + __u32 flags; + __u32 __reserved; + __aligned_u64 cap_reg; + __aligned_u64 ecap_reg; +}; + +/** + * enum iommu_hw_info_type - IOMMU Hardware Info Types + * @IOMMU_HW_INFO_TYPE_NONE: Used by the drivers that do not report hardware + * info + * @IOMMU_HW_INFO_TYPE_INTEL_VTD: Intel VT-d iommu info type + */ +enum iommu_hw_info_type { + IOMMU_HW_INFO_TYPE_NONE, + IOMMU_HW_INFO_TYPE_INTEL_VTD, +}; + +/** + * struct iommu_hw_info - ioctl(IOMMU_GET_HW_INFO) + * @size: sizeof(struct iommu_hw_info) + * @flags: Must be 0 + * @dev_id: The device bound to the iommufd + * @data_len: Input the length of a user buffer in bytes. Output the length of + * data that kernel supports + * @data_uptr: User pointer to a user-space buffer used by the kernel to fill + * the iommu type specific hardware information data + * @out_data_type: Output the iommu hardware info type as defined in the enum + * iommu_hw_info_type. + * @__reserved: Must be 0 + * + * Query an iommu type specific hardware information data from an iommu behind + * a given device that has been bound to iommufd. This hardware info data will + * be used to sync capabilities between the virtual iommu and the physical + * iommu, e.g. a nested translation setup needs to check the hardware info, so + * a guest stage-1 page table can be compatible with the physical iommu. + * + * To capture an iommu type specific hardware information data, @data_uptr and + * its length @data_len must be provided. Trailing bytes will be zeroed if the + * user buffer is larger than the data that kernel has. Otherwise, kernel only + * fills the buffer using the given length in @data_len. If the ioctl succeeds, + * @data_len will be updated to the length that kernel actually supports, + * @out_data_type will be filled to decode the data filled in the buffer + * pointed by @data_uptr. Input @data_len == zero is allowed. + */ +struct iommu_hw_info { + __u32 size; + __u32 flags; + __u32 dev_id; + __u32 data_len; + __aligned_u64 data_uptr; + __u32 out_data_type; + __u32 __reserved; +}; +#define IOMMU_GET_HW_INFO _IO(IOMMUFD_TYPE, IOMMUFD_CMD_GET_HW_INFO) #endif diff --git a/include/uapi/linux/ioprio.h b/include/uapi/linux/ioprio.h index f70f2596a6bf..bee2bdb0eedb 100644 --- a/include/uapi/linux/ioprio.h +++ b/include/uapi/linux/ioprio.h @@ -2,22 +2,23 @@ #ifndef _UAPI_LINUX_IOPRIO_H #define _UAPI_LINUX_IOPRIO_H +#include <linux/stddef.h> +#include <linux/types.h> + /* * Gives us 8 prio classes with 13-bits of data for each class */ #define IOPRIO_CLASS_SHIFT 13 -#define IOPRIO_CLASS_MASK 0x07 +#define IOPRIO_NR_CLASSES 8 +#define IOPRIO_CLASS_MASK (IOPRIO_NR_CLASSES - 1) #define IOPRIO_PRIO_MASK ((1UL << IOPRIO_CLASS_SHIFT) - 1) #define IOPRIO_PRIO_CLASS(ioprio) \ (((ioprio) >> IOPRIO_CLASS_SHIFT) & IOPRIO_CLASS_MASK) #define IOPRIO_PRIO_DATA(ioprio) ((ioprio) & IOPRIO_PRIO_MASK) -#define IOPRIO_PRIO_VALUE(class, data) \ - ((((class) & IOPRIO_CLASS_MASK) << IOPRIO_CLASS_SHIFT) | \ - ((data) & IOPRIO_PRIO_MASK)) /* - * These are the io priority groups as implemented by the BFQ and mq-deadline + * These are the io priority classes as implemented by the BFQ and mq-deadline * schedulers. RT is the realtime class, it always gets premium service. For * ATA disks supporting NCQ IO priority, RT class IOs will be processed using * high priority NCQ commands. BE is the best-effort scheduling class, the @@ -25,18 +26,30 @@ * served when no one else is using the disk. */ enum { - IOPRIO_CLASS_NONE, - IOPRIO_CLASS_RT, - IOPRIO_CLASS_BE, - IOPRIO_CLASS_IDLE, + IOPRIO_CLASS_NONE = 0, + IOPRIO_CLASS_RT = 1, + IOPRIO_CLASS_BE = 2, + IOPRIO_CLASS_IDLE = 3, + + /* Special class to indicate an invalid ioprio value */ + IOPRIO_CLASS_INVALID = 7, }; /* - * The RT and BE priority classes both support up to 8 priority levels. + * The RT and BE priority classes both support up to 8 priority levels that + * can be specified using the lower 3-bits of the priority data. */ -#define IOPRIO_NR_LEVELS 8 -#define IOPRIO_BE_NR IOPRIO_NR_LEVELS +#define IOPRIO_LEVEL_NR_BITS 3 +#define IOPRIO_NR_LEVELS (1 << IOPRIO_LEVEL_NR_BITS) +#define IOPRIO_LEVEL_MASK (IOPRIO_NR_LEVELS - 1) +#define IOPRIO_PRIO_LEVEL(ioprio) ((ioprio) & IOPRIO_LEVEL_MASK) + +#define IOPRIO_BE_NR IOPRIO_NR_LEVELS +/* + * Possible values for the "which" argument of the ioprio_get() and + * ioprio_set() system calls (see "man ioprio_set"). + */ enum { IOPRIO_WHO_PROCESS = 1, IOPRIO_WHO_PGRP, @@ -44,9 +57,71 @@ enum { }; /* - * Fallback BE priority level. + * Fallback BE class priority level. */ #define IOPRIO_NORM 4 #define IOPRIO_BE_NORM IOPRIO_NORM +/* + * The 10 bits between the priority class and the priority level are used to + * optionally define I/O hints for any combination of I/O priority class and + * level. Depending on the kernel configuration, I/O scheduler being used and + * the target I/O device being used, hints can influence how I/Os are processed + * without affecting the I/O scheduling ordering defined by the I/O priority + * class and level. + */ +#define IOPRIO_HINT_SHIFT IOPRIO_LEVEL_NR_BITS +#define IOPRIO_HINT_NR_BITS 10 +#define IOPRIO_NR_HINTS (1 << IOPRIO_HINT_NR_BITS) +#define IOPRIO_HINT_MASK (IOPRIO_NR_HINTS - 1) +#define IOPRIO_PRIO_HINT(ioprio) \ + (((ioprio) >> IOPRIO_HINT_SHIFT) & IOPRIO_HINT_MASK) + +/* + * I/O hints. + */ +enum { + /* No hint */ + IOPRIO_HINT_NONE = 0, + + /* + * Device command duration limits: indicate to the device a desired + * duration limit for the commands that will be used to process an I/O. + * These will currently only be effective for SCSI and ATA devices that + * support the command duration limits feature. If this feature is + * enabled, then the commands issued to the device to process an I/O with + * one of these hints set will have the duration limit index (dld field) + * set to the value of the hint. + */ + IOPRIO_HINT_DEV_DURATION_LIMIT_1 = 1, + IOPRIO_HINT_DEV_DURATION_LIMIT_2 = 2, + IOPRIO_HINT_DEV_DURATION_LIMIT_3 = 3, + IOPRIO_HINT_DEV_DURATION_LIMIT_4 = 4, + IOPRIO_HINT_DEV_DURATION_LIMIT_5 = 5, + IOPRIO_HINT_DEV_DURATION_LIMIT_6 = 6, + IOPRIO_HINT_DEV_DURATION_LIMIT_7 = 7, +}; + +#define IOPRIO_BAD_VALUE(val, max) ((val) < 0 || (val) >= (max)) + +/* + * Return an I/O priority value based on a class, a level and a hint. + */ +static __always_inline __u16 ioprio_value(int prioclass, int priolevel, + int priohint) +{ + if (IOPRIO_BAD_VALUE(prioclass, IOPRIO_NR_CLASSES) || + IOPRIO_BAD_VALUE(priolevel, IOPRIO_NR_LEVELS) || + IOPRIO_BAD_VALUE(priohint, IOPRIO_NR_HINTS)) + return IOPRIO_CLASS_INVALID << IOPRIO_CLASS_SHIFT; + + return (prioclass << IOPRIO_CLASS_SHIFT) | + (priohint << IOPRIO_HINT_SHIFT) | priolevel; +} + +#define IOPRIO_PRIO_VALUE(prioclass, priolevel) \ + ioprio_value(prioclass, priolevel, IOPRIO_HINT_NONE) +#define IOPRIO_PRIO_VALUE_HINT(prioclass, priolevel, priohint) \ + ioprio_value(prioclass, priolevel, priohint) + #endif /* _UAPI_LINUX_IOPRIO_H */ diff --git a/include/uapi/linux/ipv6.h b/include/uapi/linux/ipv6.h index 53326dfc59ec..cf592d7b630f 100644 --- a/include/uapi/linux/ipv6.h +++ b/include/uapi/linux/ipv6.h @@ -81,7 +81,7 @@ struct ipv6_opt_hdr { struct rt0_hdr { struct ipv6_rt_hdr rt_hdr; __u32 reserved; - struct in6_addr addr[0]; + struct in6_addr addr[]; #define rt0_type rt_hdr.type }; @@ -198,6 +198,7 @@ enum { DEVCONF_IOAM6_ID_WIDE, DEVCONF_NDISC_EVICT_NOCARRIER, DEVCONF_ACCEPT_UNTRACKED_NA, + DEVCONF_ACCEPT_RA_MIN_LFT, DEVCONF_MAX }; diff --git a/include/uapi/linux/isst_if.h b/include/uapi/linux/isst_if.h index ba078f8e9add..0df1a1c3caf4 100644 --- a/include/uapi/linux/isst_if.h +++ b/include/uapi/linux/isst_if.h @@ -163,10 +163,313 @@ struct isst_if_msr_cmds { struct isst_if_msr_cmd msr_cmd[1]; }; +/** + * struct isst_core_power - Structure to get/set core_power feature + * @get_set: 0: Get, 1: Set + * @socket_id: Socket/package id + * @power_domain: Power Domain id + * @enable: Feature enable status + * @priority_type: Priority type for the feature (ordered/proportional) + * + * Structure to get/set core_power feature state using IOCTL + * ISST_IF_CORE_POWER_STATE. + */ +struct isst_core_power { + __u8 get_set; + __u8 socket_id; + __u8 power_domain_id; + __u8 enable; + __u8 supported; + __u8 priority_type; +}; + +/** + * struct isst_clos_param - Structure to get/set clos praram + * @get_set: 0: Get, 1: Set + * @socket_id: Socket/package id + * @power_domain: Power Domain id + * clos: Clos ID for the parameters + * min_freq_mhz: Minimum frequency in MHz + * max_freq_mhz: Maximum frequency in MHz + * prop_prio: Proportional priority from 0-15 + * + * Structure to get/set per clos property using IOCTL + * ISST_IF_CLOS_PARAM. + */ +struct isst_clos_param { + __u8 get_set; + __u8 socket_id; + __u8 power_domain_id; + __u8 clos; + __u16 min_freq_mhz; + __u16 max_freq_mhz; + __u8 prop_prio; +}; + +/** + * struct isst_if_clos_assoc - Structure to assign clos to a CPU + * @socket_id: Socket/package id + * @power_domain: Power Domain id + * @logical_cpu: CPU number + * @clos: Clos ID to assign to the logical CPU + * + * Structure to get/set core_power feature. + */ +struct isst_if_clos_assoc { + __u8 socket_id; + __u8 power_domain_id; + __u16 logical_cpu; + __u16 clos; +}; + +/** + * struct isst_if_clos_assoc_cmds - Structure to assign clos to CPUs + * @cmd_count: Number of cmds (cpus) in this request + * @get_set: Request is for get or set + * @punit_cpu_map: Set to 1 if the CPU number is punit numbering not + * Linux CPU number + * + * Structure used to get/set associate CPUs to clos using IOCTL + * ISST_IF_CLOS_ASSOC. + */ +struct isst_if_clos_assoc_cmds { + __u16 cmd_count; + __u16 get_set; + __u16 punit_cpu_map; + struct isst_if_clos_assoc assoc_info[1]; +}; + +/** + * struct isst_tpmi_instance_count - Get number of TPMI instances per socket + * @socket_id: Socket/package id + * @count: Number of instances + * @valid_mask: Mask of instances as there can be holes + * + * Structure used to get TPMI instances information using + * IOCTL ISST_IF_COUNT_TPMI_INSTANCES. + */ +struct isst_tpmi_instance_count { + __u8 socket_id; + __u8 count; + __u16 valid_mask; +}; + +/** + * struct isst_perf_level_info - Structure to get information on SST-PP levels + * @socket_id: Socket/package id + * @power_domain: Power Domain id + * @logical_cpu: CPU number + * @clos: Clos ID to assign to the logical CPU + * @max_level: Maximum performance level supported by the platform + * @feature_rev: The feature revision for SST-PP supported by the platform + * @level_mask: Mask of supported performance levels + * @current_level: Current performance level + * @feature_state: SST-BF and SST-TF (enabled/disabled) status at current level + * @locked: SST-PP performance level change is locked/unlocked + * @enabled: SST-PP feature is enabled or not + * @sst-tf_support: SST-TF support status at this level + * @sst-bf_support: SST-BF support status at this level + * + * Structure to get SST-PP details using IOCTL ISST_IF_PERF_LEVELS. + */ +struct isst_perf_level_info { + __u8 socket_id; + __u8 power_domain_id; + __u8 max_level; + __u8 feature_rev; + __u8 level_mask; + __u8 current_level; + __u8 feature_state; + __u8 locked; + __u8 enabled; + __u8 sst_tf_support; + __u8 sst_bf_support; +}; + +/** + * struct isst_perf_level_control - Structure to set SST-PP level + * @socket_id: Socket/package id + * @power_domain: Power Domain id + * @level: level to set + * + * Structure used change SST-PP level using IOCTL ISST_IF_PERF_SET_LEVEL. + */ +struct isst_perf_level_control { + __u8 socket_id; + __u8 power_domain_id; + __u8 level; +}; + +/** + * struct isst_perf_feature_control - Structure to activate SST-BF/SST-TF + * @socket_id: Socket/package id + * @power_domain: Power Domain id + * @feature: bit 0 = SST-BF state, bit 1 = SST-TF state + * + * Structure used to enable SST-BF/SST-TF using IOCTL ISST_IF_PERF_SET_FEATURE. + */ +struct isst_perf_feature_control { + __u8 socket_id; + __u8 power_domain_id; + __u8 feature; +}; + +#define TRL_MAX_BUCKETS 8 +#define TRL_MAX_LEVELS 6 + +/** + * struct isst_perf_level_data_info - Structure to get SST-PP level details + * @socket_id: Socket/package id + * @power_domain: Power Domain id + * @level: SST-PP level for which caller wants to get information + * @tdp_ratio: TDP Ratio + * @base_freq_mhz: Base frequency in MHz + * @base_freq_avx2_mhz: AVX2 Base frequency in MHz + * @base_freq_avx512_mhz: AVX512 base frequency in MHz + * @base_freq_amx_mhz: AMX base frequency in MHz + * @thermal_design_power_w: Thermal design (TDP) power + * @tjunction_max_c: Max junction temperature + * @max_memory_freq_mhz: Max memory frequency in MHz + * @cooling_type: Type of cooling is used + * @p0_freq_mhz: core maximum frequency + * @p1_freq_mhz: Core TDP frequency + * @pn_freq_mhz: Core maximum efficiency frequency + * @pm_freq_mhz: Core minimum frequency + * @p0_fabric_freq_mhz: Fabric (Uncore) maximum frequency + * @p1_fabric_freq_mhz: Fabric (Uncore) TDP frequency + * @pn_fabric_freq_mhz: Fabric (Uncore) minimum efficiency frequency + * @pm_fabric_freq_mhz: Fabric (Uncore) minimum frequency + * @max_buckets: Maximum trl buckets + * @max_trl_levels: Maximum trl levels + * @bucket_core_counts[TRL_MAX_BUCKETS]: Number of cores per bucket + * @trl_freq_mhz[TRL_MAX_LEVELS][TRL_MAX_BUCKETS]: maximum frequency + * for a bucket and trl level + * + * Structure used to get information on frequencies and TDP for a SST-PP + * level using ISST_IF_GET_PERF_LEVEL_INFO. + */ +struct isst_perf_level_data_info { + __u8 socket_id; + __u8 power_domain_id; + __u16 level; + __u16 tdp_ratio; + __u16 base_freq_mhz; + __u16 base_freq_avx2_mhz; + __u16 base_freq_avx512_mhz; + __u16 base_freq_amx_mhz; + __u16 thermal_design_power_w; + __u16 tjunction_max_c; + __u16 max_memory_freq_mhz; + __u16 cooling_type; + __u16 p0_freq_mhz; + __u16 p1_freq_mhz; + __u16 pn_freq_mhz; + __u16 pm_freq_mhz; + __u16 p0_fabric_freq_mhz; + __u16 p1_fabric_freq_mhz; + __u16 pn_fabric_freq_mhz; + __u16 pm_fabric_freq_mhz; + __u16 max_buckets; + __u16 max_trl_levels; + __u16 bucket_core_counts[TRL_MAX_BUCKETS]; + __u16 trl_freq_mhz[TRL_MAX_LEVELS][TRL_MAX_BUCKETS]; +}; + +/** + * struct isst_perf_level_cpu_mask - Structure to get SST-PP level CPU mask + * @socket_id: Socket/package id + * @power_domain: Power Domain id + * @level: SST-PP level for which caller wants to get information + * @punit_cpu_map: Set to 1 if the CPU number is punit numbering not + * Linux CPU number. If 0 CPU buffer is copied to user space + * supplied cpu_buffer of size cpu_buffer_size. Punit + * cpu mask is copied to "mask" field. + * @mask: cpu mask for this PP level (punit CPU numbering) + * @cpu_buffer_size: size of cpu_buffer also used to return the copied CPU + * buffer size. + * @cpu_buffer: Buffer to copy CPU mask when punit_cpu_map is 0 + * + * Structure used to get cpumask for a SST-PP level using + * IOCTL ISST_IF_GET_PERF_LEVEL_CPU_MASK. Also used to get CPU mask for + * IOCTL ISST_IF_GET_BASE_FREQ_CPU_MASK for SST-BF. + */ +struct isst_perf_level_cpu_mask { + __u8 socket_id; + __u8 power_domain_id; + __u8 level; + __u8 punit_cpu_map; + __u64 mask; + __u16 cpu_buffer_size; + __s8 cpu_buffer[1]; +}; + +/** + * struct isst_base_freq_info - Structure to get SST-BF frequencies + * @socket_id: Socket/package id + * @power_domain: Power Domain id + * @level: SST-PP level for which caller wants to get information + * @high_base_freq_mhz: High priority CPU base frequency + * @low_base_freq_mhz: Low priority CPU base frequency + * @tjunction_max_c: Max junction temperature + * @thermal_design_power_w: Thermal design power in watts + * + * Structure used to get SST-BF information using + * IOCTL ISST_IF_GET_BASE_FREQ_INFO. + */ +struct isst_base_freq_info { + __u8 socket_id; + __u8 power_domain_id; + __u16 level; + __u16 high_base_freq_mhz; + __u16 low_base_freq_mhz; + __u16 tjunction_max_c; + __u16 thermal_design_power_w; +}; + +/** + * struct isst_turbo_freq_info - Structure to get SST-TF frequencies + * @socket_id: Socket/package id + * @power_domain: Power Domain id + * @level: SST-PP level for which caller wants to get information + * @max_clip_freqs: Maximum number of low priority core clipping frequencies + * @lp_clip_freq_mhz: Clip frequencies per trl level + * @bucket_core_counts: Maximum number of cores for a bucket + * @trl_freq_mhz: Frequencies per trl level for each bucket + * + * Structure used to get SST-TF information using + * IOCTL ISST_IF_GET_TURBO_FREQ_INFO. + */ +struct isst_turbo_freq_info { + __u8 socket_id; + __u8 power_domain_id; + __u16 level; + __u16 max_clip_freqs; + __u16 max_buckets; + __u16 max_trl_levels; + __u16 lp_clip_freq_mhz[TRL_MAX_LEVELS]; + __u16 bucket_core_counts[TRL_MAX_BUCKETS]; + __u16 trl_freq_mhz[TRL_MAX_LEVELS][TRL_MAX_BUCKETS]; +}; + #define ISST_IF_MAGIC 0xFE #define ISST_IF_GET_PLATFORM_INFO _IOR(ISST_IF_MAGIC, 0, struct isst_if_platform_info *) #define ISST_IF_GET_PHY_ID _IOWR(ISST_IF_MAGIC, 1, struct isst_if_cpu_map *) #define ISST_IF_IO_CMD _IOW(ISST_IF_MAGIC, 2, struct isst_if_io_regs *) #define ISST_IF_MBOX_COMMAND _IOWR(ISST_IF_MAGIC, 3, struct isst_if_mbox_cmds *) #define ISST_IF_MSR_COMMAND _IOWR(ISST_IF_MAGIC, 4, struct isst_if_msr_cmds *) + +#define ISST_IF_COUNT_TPMI_INSTANCES _IOR(ISST_IF_MAGIC, 5, struct isst_tpmi_instance_count *) +#define ISST_IF_CORE_POWER_STATE _IOWR(ISST_IF_MAGIC, 6, struct isst_core_power *) +#define ISST_IF_CLOS_PARAM _IOWR(ISST_IF_MAGIC, 7, struct isst_clos_param *) +#define ISST_IF_CLOS_ASSOC _IOWR(ISST_IF_MAGIC, 8, struct isst_if_clos_assoc_cmds *) + +#define ISST_IF_PERF_LEVELS _IOWR(ISST_IF_MAGIC, 9, struct isst_perf_level_info *) +#define ISST_IF_PERF_SET_LEVEL _IOW(ISST_IF_MAGIC, 10, struct isst_perf_level_control *) +#define ISST_IF_PERF_SET_FEATURE _IOW(ISST_IF_MAGIC, 11, struct isst_perf_feature_control *) +#define ISST_IF_GET_PERF_LEVEL_INFO _IOR(ISST_IF_MAGIC, 12, struct isst_perf_level_data_info *) +#define ISST_IF_GET_PERF_LEVEL_CPU_MASK _IOR(ISST_IF_MAGIC, 13, struct isst_perf_level_cpu_mask *) +#define ISST_IF_GET_BASE_FREQ_INFO _IOR(ISST_IF_MAGIC, 14, struct isst_base_freq_info *) +#define ISST_IF_GET_BASE_FREQ_CPU_MASK _IOR(ISST_IF_MAGIC, 15, struct isst_perf_level_cpu_mask *) +#define ISST_IF_GET_TURBO_FREQ_INFO _IOR(ISST_IF_MAGIC, 16, struct isst_turbo_freq_info *) + #endif diff --git a/include/uapi/linux/kexec.h b/include/uapi/linux/kexec.h index 981016e05cfa..01766dd839b0 100644 --- a/include/uapi/linux/kexec.h +++ b/include/uapi/linux/kexec.h @@ -12,6 +12,7 @@ /* kexec flags for different usage scenarios */ #define KEXEC_ON_CRASH 0x00000001 #define KEXEC_PRESERVE_CONTEXT 0x00000002 +#define KEXEC_UPDATE_ELFCOREHDR 0x00000004 #define KEXEC_ARCH_MASK 0xffff0000 /* diff --git a/include/uapi/linux/kfd_ioctl.h b/include/uapi/linux/kfd_ioctl.h index 42b60198b6c5..eeb2fdcbdcb7 100644 --- a/include/uapi/linux/kfd_ioctl.h +++ b/include/uapi/linux/kfd_ioctl.h @@ -37,9 +37,12 @@ * - 1.9 - Add available memory ioctl * - 1.10 - Add SMI profiler event log * - 1.11 - Add unified memory for ctx save/restore area + * - 1.12 - Add DMA buf export ioctl + * - 1.13 - Add debugger API + * - 1.14 - Update kfd_event_data */ #define KFD_IOCTL_MAJOR_VERSION 1 -#define KFD_IOCTL_MINOR_VERSION 11 +#define KFD_IOCTL_MINOR_VERSION 14 struct kfd_ioctl_get_version_args { __u32 major_version; /* from KFD */ @@ -109,6 +112,32 @@ struct kfd_ioctl_get_available_memory_args { __u32 pad; }; +struct kfd_dbg_device_info_entry { + __u64 exception_status; + __u64 lds_base; + __u64 lds_limit; + __u64 scratch_base; + __u64 scratch_limit; + __u64 gpuvm_base; + __u64 gpuvm_limit; + __u32 gpu_id; + __u32 location_id; + __u32 vendor_id; + __u32 device_id; + __u32 revision_id; + __u32 subsystem_vendor_id; + __u32 subsystem_device_id; + __u32 fw_version; + __u32 gfx_target_version; + __u32 simd_count; + __u32 max_waves_per_simd; + __u32 array_count; + __u32 simd_arrays_per_engine; + __u32 num_xcc; + __u32 capability; + __u32 debug_prop; +}; + /* For kfd_ioctl_set_memory_policy_args.default_policy and alternate_policy */ #define KFD_IOC_CACHE_POLICY_COHERENT 0 #define KFD_IOC_CACHE_POLICY_NONCOHERENT 1 @@ -292,12 +321,20 @@ struct kfd_hsa_hw_exception_data { __u32 gpu_id; }; +/* hsa signal event data */ +struct kfd_hsa_signal_event_data { + __u64 last_event_age; /* to and from KFD */ +}; + /* Event data */ struct kfd_event_data { union { + /* From KFD */ struct kfd_hsa_memory_exception_data memory_exception_data; struct kfd_hsa_hw_exception_data hw_exception_data; - }; /* From KFD */ + /* To and From KFD */ + struct kfd_hsa_signal_event_data signal_event_data; + }; __u64 kfd_event_data_ext; /* pointer to an extension structure for future exception types */ __u32 event_id; /* to KFD */ @@ -463,6 +500,12 @@ struct kfd_ioctl_import_dmabuf_args { __u32 dmabuf_fd; /* to KFD */ }; +struct kfd_ioctl_export_dmabuf_args { + __u64 handle; /* to KFD */ + __u32 flags; /* to KFD */ + __u32 dmabuf_fd; /* from KFD */ +}; + /* * KFD SMI(System Management Interface) events */ @@ -766,6 +809,640 @@ struct kfd_ioctl_set_xnack_mode_args { __s32 xnack_enabled; }; +/* Wave launch override modes */ +enum kfd_dbg_trap_override_mode { + KFD_DBG_TRAP_OVERRIDE_OR = 0, + KFD_DBG_TRAP_OVERRIDE_REPLACE = 1 +}; + +/* Wave launch overrides */ +enum kfd_dbg_trap_mask { + KFD_DBG_TRAP_MASK_FP_INVALID = 1, + KFD_DBG_TRAP_MASK_FP_INPUT_DENORMAL = 2, + KFD_DBG_TRAP_MASK_FP_DIVIDE_BY_ZERO = 4, + KFD_DBG_TRAP_MASK_FP_OVERFLOW = 8, + KFD_DBG_TRAP_MASK_FP_UNDERFLOW = 16, + KFD_DBG_TRAP_MASK_FP_INEXACT = 32, + KFD_DBG_TRAP_MASK_INT_DIVIDE_BY_ZERO = 64, + KFD_DBG_TRAP_MASK_DBG_ADDRESS_WATCH = 128, + KFD_DBG_TRAP_MASK_DBG_MEMORY_VIOLATION = 256, + KFD_DBG_TRAP_MASK_TRAP_ON_WAVE_START = (1 << 30), + KFD_DBG_TRAP_MASK_TRAP_ON_WAVE_END = (1 << 31) +}; + +/* Wave launch modes */ +enum kfd_dbg_trap_wave_launch_mode { + KFD_DBG_TRAP_WAVE_LAUNCH_MODE_NORMAL = 0, + KFD_DBG_TRAP_WAVE_LAUNCH_MODE_HALT = 1, + KFD_DBG_TRAP_WAVE_LAUNCH_MODE_DEBUG = 3 +}; + +/* Address watch modes */ +enum kfd_dbg_trap_address_watch_mode { + KFD_DBG_TRAP_ADDRESS_WATCH_MODE_READ = 0, + KFD_DBG_TRAP_ADDRESS_WATCH_MODE_NONREAD = 1, + KFD_DBG_TRAP_ADDRESS_WATCH_MODE_ATOMIC = 2, + KFD_DBG_TRAP_ADDRESS_WATCH_MODE_ALL = 3 +}; + +/* Additional wave settings */ +enum kfd_dbg_trap_flags { + KFD_DBG_TRAP_FLAG_SINGLE_MEM_OP = 1, +}; + +/* Trap exceptions */ +enum kfd_dbg_trap_exception_code { + EC_NONE = 0, + /* per queue */ + EC_QUEUE_WAVE_ABORT = 1, + EC_QUEUE_WAVE_TRAP = 2, + EC_QUEUE_WAVE_MATH_ERROR = 3, + EC_QUEUE_WAVE_ILLEGAL_INSTRUCTION = 4, + EC_QUEUE_WAVE_MEMORY_VIOLATION = 5, + EC_QUEUE_WAVE_APERTURE_VIOLATION = 6, + EC_QUEUE_PACKET_DISPATCH_DIM_INVALID = 16, + EC_QUEUE_PACKET_DISPATCH_GROUP_SEGMENT_SIZE_INVALID = 17, + EC_QUEUE_PACKET_DISPATCH_CODE_INVALID = 18, + EC_QUEUE_PACKET_RESERVED = 19, + EC_QUEUE_PACKET_UNSUPPORTED = 20, + EC_QUEUE_PACKET_DISPATCH_WORK_GROUP_SIZE_INVALID = 21, + EC_QUEUE_PACKET_DISPATCH_REGISTER_INVALID = 22, + EC_QUEUE_PACKET_VENDOR_UNSUPPORTED = 23, + EC_QUEUE_PREEMPTION_ERROR = 30, + EC_QUEUE_NEW = 31, + /* per device */ + EC_DEVICE_QUEUE_DELETE = 32, + EC_DEVICE_MEMORY_VIOLATION = 33, + EC_DEVICE_RAS_ERROR = 34, + EC_DEVICE_FATAL_HALT = 35, + EC_DEVICE_NEW = 36, + /* per process */ + EC_PROCESS_RUNTIME = 48, + EC_PROCESS_DEVICE_REMOVE = 49, + EC_MAX +}; + +/* Mask generated by ecode in kfd_dbg_trap_exception_code */ +#define KFD_EC_MASK(ecode) (1ULL << (ecode - 1)) + +/* Masks for exception code type checks below */ +#define KFD_EC_MASK_QUEUE (KFD_EC_MASK(EC_QUEUE_WAVE_ABORT) | \ + KFD_EC_MASK(EC_QUEUE_WAVE_TRAP) | \ + KFD_EC_MASK(EC_QUEUE_WAVE_MATH_ERROR) | \ + KFD_EC_MASK(EC_QUEUE_WAVE_ILLEGAL_INSTRUCTION) | \ + KFD_EC_MASK(EC_QUEUE_WAVE_MEMORY_VIOLATION) | \ + KFD_EC_MASK(EC_QUEUE_WAVE_APERTURE_VIOLATION) | \ + KFD_EC_MASK(EC_QUEUE_PACKET_DISPATCH_DIM_INVALID) | \ + KFD_EC_MASK(EC_QUEUE_PACKET_DISPATCH_GROUP_SEGMENT_SIZE_INVALID) | \ + KFD_EC_MASK(EC_QUEUE_PACKET_DISPATCH_CODE_INVALID) | \ + KFD_EC_MASK(EC_QUEUE_PACKET_RESERVED) | \ + KFD_EC_MASK(EC_QUEUE_PACKET_UNSUPPORTED) | \ + KFD_EC_MASK(EC_QUEUE_PACKET_DISPATCH_WORK_GROUP_SIZE_INVALID) | \ + KFD_EC_MASK(EC_QUEUE_PACKET_DISPATCH_REGISTER_INVALID) | \ + KFD_EC_MASK(EC_QUEUE_PACKET_VENDOR_UNSUPPORTED) | \ + KFD_EC_MASK(EC_QUEUE_PREEMPTION_ERROR) | \ + KFD_EC_MASK(EC_QUEUE_NEW)) +#define KFD_EC_MASK_DEVICE (KFD_EC_MASK(EC_DEVICE_QUEUE_DELETE) | \ + KFD_EC_MASK(EC_DEVICE_RAS_ERROR) | \ + KFD_EC_MASK(EC_DEVICE_FATAL_HALT) | \ + KFD_EC_MASK(EC_DEVICE_MEMORY_VIOLATION) | \ + KFD_EC_MASK(EC_DEVICE_NEW)) +#define KFD_EC_MASK_PROCESS (KFD_EC_MASK(EC_PROCESS_RUNTIME) | \ + KFD_EC_MASK(EC_PROCESS_DEVICE_REMOVE)) + +/* Checks for exception code types for KFD search */ +#define KFD_DBG_EC_TYPE_IS_QUEUE(ecode) \ + (!!(KFD_EC_MASK(ecode) & KFD_EC_MASK_QUEUE)) +#define KFD_DBG_EC_TYPE_IS_DEVICE(ecode) \ + (!!(KFD_EC_MASK(ecode) & KFD_EC_MASK_DEVICE)) +#define KFD_DBG_EC_TYPE_IS_PROCESS(ecode) \ + (!!(KFD_EC_MASK(ecode) & KFD_EC_MASK_PROCESS)) + + +/* Runtime enable states */ +enum kfd_dbg_runtime_state { + DEBUG_RUNTIME_STATE_DISABLED = 0, + DEBUG_RUNTIME_STATE_ENABLED = 1, + DEBUG_RUNTIME_STATE_ENABLED_BUSY = 2, + DEBUG_RUNTIME_STATE_ENABLED_ERROR = 3 +}; + +/* Runtime enable status */ +struct kfd_runtime_info { + __u64 r_debug; + __u32 runtime_state; + __u32 ttmp_setup; +}; + +/* Enable modes for runtime enable */ +#define KFD_RUNTIME_ENABLE_MODE_ENABLE_MASK 1 +#define KFD_RUNTIME_ENABLE_MODE_TTMP_SAVE_MASK 2 + +/** + * kfd_ioctl_runtime_enable_args - Arguments for runtime enable + * + * Coordinates debug exception signalling and debug device enablement with runtime. + * + * @r_debug - pointer to user struct for sharing information between ROCr and the debuggger + * @mode_mask - mask to set mode + * KFD_RUNTIME_ENABLE_MODE_ENABLE_MASK - enable runtime for debugging, otherwise disable + * KFD_RUNTIME_ENABLE_MODE_TTMP_SAVE_MASK - enable trap temporary setup (ignore on disable) + * @capabilities_mask - mask to notify runtime on what KFD supports + * + * Return - 0 on SUCCESS. + * - EBUSY if runtime enable call already pending. + * - EEXIST if user queues already active prior to call. + * If process is debug enabled, runtime enable will enable debug devices and + * wait for debugger process to send runtime exception EC_PROCESS_RUNTIME + * to unblock - see kfd_ioctl_dbg_trap_args. + * + */ +struct kfd_ioctl_runtime_enable_args { + __u64 r_debug; + __u32 mode_mask; + __u32 capabilities_mask; +}; + +/* Queue information */ +struct kfd_queue_snapshot_entry { + __u64 exception_status; + __u64 ring_base_address; + __u64 write_pointer_address; + __u64 read_pointer_address; + __u64 ctx_save_restore_address; + __u32 queue_id; + __u32 gpu_id; + __u32 ring_size; + __u32 queue_type; + __u32 ctx_save_restore_area_size; + __u32 reserved; +}; + +/* Queue status return for suspend/resume */ +#define KFD_DBG_QUEUE_ERROR_BIT 30 +#define KFD_DBG_QUEUE_INVALID_BIT 31 +#define KFD_DBG_QUEUE_ERROR_MASK (1 << KFD_DBG_QUEUE_ERROR_BIT) +#define KFD_DBG_QUEUE_INVALID_MASK (1 << KFD_DBG_QUEUE_INVALID_BIT) + +/* Context save area header information */ +struct kfd_context_save_area_header { + struct { + __u32 control_stack_offset; + __u32 control_stack_size; + __u32 wave_state_offset; + __u32 wave_state_size; + } wave_state; + __u32 debug_offset; + __u32 debug_size; + __u64 err_payload_addr; + __u32 err_event_id; + __u32 reserved1; +}; + +/* + * Debug operations + * + * For specifics on usage and return values, see documentation per operation + * below. Otherwise, generic error returns apply: + * - ESRCH if the process to debug does not exist. + * + * - EINVAL (with KFD_IOC_DBG_TRAP_ENABLE exempt) if operation + * KFD_IOC_DBG_TRAP_ENABLE has not succeeded prior. + * Also returns this error if GPU hardware scheduling is not supported. + * + * - EPERM (with KFD_IOC_DBG_TRAP_DISABLE exempt) if target process is not + * PTRACE_ATTACHED. KFD_IOC_DBG_TRAP_DISABLE is exempt to allow + * clean up of debug mode as long as process is debug enabled. + * + * - EACCES if any DBG_HW_OP (debug hardware operation) is requested when + * AMDKFD_IOC_RUNTIME_ENABLE has not succeeded prior. + * + * - ENODEV if any GPU does not support debugging on a DBG_HW_OP call. + * + * - Other errors may be returned when a DBG_HW_OP occurs while the GPU + * is in a fatal state. + * + */ +enum kfd_dbg_trap_operations { + KFD_IOC_DBG_TRAP_ENABLE = 0, + KFD_IOC_DBG_TRAP_DISABLE = 1, + KFD_IOC_DBG_TRAP_SEND_RUNTIME_EVENT = 2, + KFD_IOC_DBG_TRAP_SET_EXCEPTIONS_ENABLED = 3, + KFD_IOC_DBG_TRAP_SET_WAVE_LAUNCH_OVERRIDE = 4, /* DBG_HW_OP */ + KFD_IOC_DBG_TRAP_SET_WAVE_LAUNCH_MODE = 5, /* DBG_HW_OP */ + KFD_IOC_DBG_TRAP_SUSPEND_QUEUES = 6, /* DBG_HW_OP */ + KFD_IOC_DBG_TRAP_RESUME_QUEUES = 7, /* DBG_HW_OP */ + KFD_IOC_DBG_TRAP_SET_NODE_ADDRESS_WATCH = 8, /* DBG_HW_OP */ + KFD_IOC_DBG_TRAP_CLEAR_NODE_ADDRESS_WATCH = 9, /* DBG_HW_OP */ + KFD_IOC_DBG_TRAP_SET_FLAGS = 10, + KFD_IOC_DBG_TRAP_QUERY_DEBUG_EVENT = 11, + KFD_IOC_DBG_TRAP_QUERY_EXCEPTION_INFO = 12, + KFD_IOC_DBG_TRAP_GET_QUEUE_SNAPSHOT = 13, + KFD_IOC_DBG_TRAP_GET_DEVICE_SNAPSHOT = 14 +}; + +/** + * kfd_ioctl_dbg_trap_enable_args + * + * Arguments for KFD_IOC_DBG_TRAP_ENABLE. + * + * Enables debug session for target process. Call @op KFD_IOC_DBG_TRAP_DISABLE in + * kfd_ioctl_dbg_trap_args to disable debug session. + * + * @exception_mask (IN) - exceptions to raise to the debugger + * @rinfo_ptr (IN) - pointer to runtime info buffer (see kfd_runtime_info) + * @rinfo_size (IN/OUT) - size of runtime info buffer in bytes + * @dbg_fd (IN) - fd the KFD will nofify the debugger with of raised + * exceptions set in exception_mask. + * + * Generic errors apply (see kfd_dbg_trap_operations). + * Return - 0 on SUCCESS. + * Copies KFD saved kfd_runtime_info to @rinfo_ptr on enable. + * Size of kfd_runtime saved by the KFD returned to @rinfo_size. + * - EBADF if KFD cannot get a reference to dbg_fd. + * - EFAULT if KFD cannot copy runtime info to rinfo_ptr. + * - EINVAL if target process is already debug enabled. + * + */ +struct kfd_ioctl_dbg_trap_enable_args { + __u64 exception_mask; + __u64 rinfo_ptr; + __u32 rinfo_size; + __u32 dbg_fd; +}; + +/** + * kfd_ioctl_dbg_trap_send_runtime_event_args + * + * + * Arguments for KFD_IOC_DBG_TRAP_SEND_RUNTIME_EVENT. + * Raises exceptions to runtime. + * + * @exception_mask (IN) - exceptions to raise to runtime + * @gpu_id (IN) - target device id + * @queue_id (IN) - target queue id + * + * Generic errors apply (see kfd_dbg_trap_operations). + * Return - 0 on SUCCESS. + * - ENODEV if gpu_id not found. + * If exception_mask contains EC_PROCESS_RUNTIME, unblocks pending + * AMDKFD_IOC_RUNTIME_ENABLE call - see kfd_ioctl_runtime_enable_args. + * All other exceptions are raised to runtime through err_payload_addr. + * See kfd_context_save_area_header. + */ +struct kfd_ioctl_dbg_trap_send_runtime_event_args { + __u64 exception_mask; + __u32 gpu_id; + __u32 queue_id; +}; + +/** + * kfd_ioctl_dbg_trap_set_exceptions_enabled_args + * + * Arguments for KFD_IOC_SET_EXCEPTIONS_ENABLED + * Set new exceptions to be raised to the debugger. + * + * @exception_mask (IN) - new exceptions to raise the debugger + * + * Generic errors apply (see kfd_dbg_trap_operations). + * Return - 0 on SUCCESS. + */ +struct kfd_ioctl_dbg_trap_set_exceptions_enabled_args { + __u64 exception_mask; +}; + +/** + * kfd_ioctl_dbg_trap_set_wave_launch_override_args + * + * Arguments for KFD_IOC_DBG_TRAP_SET_WAVE_LAUNCH_OVERRIDE + * Enable HW exceptions to raise trap. + * + * @override_mode (IN) - see kfd_dbg_trap_override_mode + * @enable_mask (IN/OUT) - reference kfd_dbg_trap_mask. + * IN is the override modes requested to be enabled. + * OUT is referenced in Return below. + * @support_request_mask (IN/OUT) - reference kfd_dbg_trap_mask. + * IN is the override modes requested for support check. + * OUT is referenced in Return below. + * + * Generic errors apply (see kfd_dbg_trap_operations). + * Return - 0 on SUCCESS. + * Previous enablement is returned in @enable_mask. + * Actual override support is returned in @support_request_mask. + * - EINVAL if override mode is not supported. + * - EACCES if trap support requested is not actually supported. + * i.e. enable_mask (IN) is not a subset of support_request_mask (OUT). + * Otherwise it is considered a generic error (see kfd_dbg_trap_operations). + */ +struct kfd_ioctl_dbg_trap_set_wave_launch_override_args { + __u32 override_mode; + __u32 enable_mask; + __u32 support_request_mask; + __u32 pad; +}; + +/** + * kfd_ioctl_dbg_trap_set_wave_launch_mode_args + * + * Arguments for KFD_IOC_DBG_TRAP_SET_WAVE_LAUNCH_MODE + * Set wave launch mode. + * + * @mode (IN) - see kfd_dbg_trap_wave_launch_mode + * + * Generic errors apply (see kfd_dbg_trap_operations). + * Return - 0 on SUCCESS. + */ +struct kfd_ioctl_dbg_trap_set_wave_launch_mode_args { + __u32 launch_mode; + __u32 pad; +}; + +/** + * kfd_ioctl_dbg_trap_suspend_queues_ags + * + * Arguments for KFD_IOC_DBG_TRAP_SUSPEND_QUEUES + * Suspend queues. + * + * @exception_mask (IN) - raised exceptions to clear + * @queue_array_ptr (IN) - pointer to array of queue ids (u32 per queue id) + * to suspend + * @num_queues (IN) - number of queues to suspend in @queue_array_ptr + * @grace_period (IN) - wave time allowance before preemption + * per 1K GPU clock cycle unit + * + * Generic errors apply (see kfd_dbg_trap_operations). + * Destruction of a suspended queue is blocked until the queue is + * resumed. This allows the debugger to access queue information and + * the its context save area without running into a race condition on + * queue destruction. + * Automatically copies per queue context save area header information + * into the save area base + * (see kfd_queue_snapshot_entry and kfd_context_save_area_header). + * + * Return - Number of queues suspended on SUCCESS. + * . KFD_DBG_QUEUE_ERROR_MASK and KFD_DBG_QUEUE_INVALID_MASK masked + * for each queue id in @queue_array_ptr array reports unsuccessful + * suspend reason. + * KFD_DBG_QUEUE_ERROR_MASK = HW failure. + * KFD_DBG_QUEUE_INVALID_MASK = queue does not exist, is new or + * is being destroyed. + */ +struct kfd_ioctl_dbg_trap_suspend_queues_args { + __u64 exception_mask; + __u64 queue_array_ptr; + __u32 num_queues; + __u32 grace_period; +}; + +/** + * kfd_ioctl_dbg_trap_resume_queues_args + * + * Arguments for KFD_IOC_DBG_TRAP_RESUME_QUEUES + * Resume queues. + * + * @queue_array_ptr (IN) - pointer to array of queue ids (u32 per queue id) + * to resume + * @num_queues (IN) - number of queues to resume in @queue_array_ptr + * + * Generic errors apply (see kfd_dbg_trap_operations). + * Return - Number of queues resumed on SUCCESS. + * KFD_DBG_QUEUE_ERROR_MASK and KFD_DBG_QUEUE_INVALID_MASK mask + * for each queue id in @queue_array_ptr array reports unsuccessful + * resume reason. + * KFD_DBG_QUEUE_ERROR_MASK = HW failure. + * KFD_DBG_QUEUE_INVALID_MASK = queue does not exist. + */ +struct kfd_ioctl_dbg_trap_resume_queues_args { + __u64 queue_array_ptr; + __u32 num_queues; + __u32 pad; +}; + +/** + * kfd_ioctl_dbg_trap_set_node_address_watch_args + * + * Arguments for KFD_IOC_DBG_TRAP_SET_NODE_ADDRESS_WATCH + * Sets address watch for device. + * + * @address (IN) - watch address to set + * @mode (IN) - see kfd_dbg_trap_address_watch_mode + * @mask (IN) - watch address mask + * @gpu_id (IN) - target gpu to set watch point + * @id (OUT) - watch id allocated + * + * Generic errors apply (see kfd_dbg_trap_operations). + * Return - 0 on SUCCESS. + * Allocated watch ID returned to @id. + * - ENODEV if gpu_id not found. + * - ENOMEM if watch IDs can be allocated + */ +struct kfd_ioctl_dbg_trap_set_node_address_watch_args { + __u64 address; + __u32 mode; + __u32 mask; + __u32 gpu_id; + __u32 id; +}; + +/** + * kfd_ioctl_dbg_trap_clear_node_address_watch_args + * + * Arguments for KFD_IOC_DBG_TRAP_CLEAR_NODE_ADDRESS_WATCH + * Clear address watch for device. + * + * @gpu_id (IN) - target device to clear watch point + * @id (IN) - allocated watch id to clear + * + * Generic errors apply (see kfd_dbg_trap_operations). + * Return - 0 on SUCCESS. + * - ENODEV if gpu_id not found. + * - EINVAL if watch ID has not been allocated. + */ +struct kfd_ioctl_dbg_trap_clear_node_address_watch_args { + __u32 gpu_id; + __u32 id; +}; + +/** + * kfd_ioctl_dbg_trap_set_flags_args + * + * Arguments for KFD_IOC_DBG_TRAP_SET_FLAGS + * Sets flags for wave behaviour. + * + * @flags (IN/OUT) - IN = flags to enable, OUT = flags previously enabled + * + * Generic errors apply (see kfd_dbg_trap_operations). + * Return - 0 on SUCCESS. + * - EACCESS if any debug device does not allow flag options. + */ +struct kfd_ioctl_dbg_trap_set_flags_args { + __u32 flags; + __u32 pad; +}; + +/** + * kfd_ioctl_dbg_trap_query_debug_event_args + * + * Arguments for KFD_IOC_DBG_TRAP_QUERY_DEBUG_EVENT + * + * Find one or more raised exceptions. This function can return multiple + * exceptions from a single queue or a single device with one call. To find + * all raised exceptions, this function must be called repeatedly until it + * returns -EAGAIN. Returned exceptions can optionally be cleared by + * setting the corresponding bit in the @exception_mask input parameter. + * However, clearing an exception prevents retrieving further information + * about it with KFD_IOC_DBG_TRAP_QUERY_EXCEPTION_INFO. + * + * @exception_mask (IN/OUT) - exception to clear (IN) and raised (OUT) + * @gpu_id (OUT) - gpu id of exceptions raised + * @queue_id (OUT) - queue id of exceptions raised + * + * Generic errors apply (see kfd_dbg_trap_operations). + * Return - 0 on raised exception found + * Raised exceptions found are returned in @exception mask + * with reported source id returned in @gpu_id or @queue_id. + * - EAGAIN if no raised exception has been found + */ +struct kfd_ioctl_dbg_trap_query_debug_event_args { + __u64 exception_mask; + __u32 gpu_id; + __u32 queue_id; +}; + +/** + * kfd_ioctl_dbg_trap_query_exception_info_args + * + * Arguments KFD_IOC_DBG_TRAP_QUERY_EXCEPTION_INFO + * Get additional info on raised exception. + * + * @info_ptr (IN) - pointer to exception info buffer to copy to + * @info_size (IN/OUT) - exception info buffer size (bytes) + * @source_id (IN) - target gpu or queue id + * @exception_code (IN) - target exception + * @clear_exception (IN) - clear raised @exception_code exception + * (0 = false, 1 = true) + * + * Generic errors apply (see kfd_dbg_trap_operations). + * Return - 0 on SUCCESS. + * If @exception_code is EC_DEVICE_MEMORY_VIOLATION, copy @info_size(OUT) + * bytes of memory exception data to @info_ptr. + * If @exception_code is EC_PROCESS_RUNTIME, copy saved + * kfd_runtime_info to @info_ptr. + * Actual required @info_ptr size (bytes) is returned in @info_size. + */ +struct kfd_ioctl_dbg_trap_query_exception_info_args { + __u64 info_ptr; + __u32 info_size; + __u32 source_id; + __u32 exception_code; + __u32 clear_exception; +}; + +/** + * kfd_ioctl_dbg_trap_get_queue_snapshot_args + * + * Arguments KFD_IOC_DBG_TRAP_GET_QUEUE_SNAPSHOT + * Get queue information. + * + * @exception_mask (IN) - exceptions raised to clear + * @snapshot_buf_ptr (IN) - queue snapshot entry buffer (see kfd_queue_snapshot_entry) + * @num_queues (IN/OUT) - number of queue snapshot entries + * The debugger specifies the size of the array allocated in @num_queues. + * KFD returns the number of queues that actually existed. If this is + * larger than the size specified by the debugger, KFD will not overflow + * the array allocated by the debugger. + * + * @entry_size (IN/OUT) - size per entry in bytes + * The debugger specifies sizeof(struct kfd_queue_snapshot_entry) in + * @entry_size. KFD returns the number of bytes actually populated per + * entry. The debugger should use the KFD_IOCTL_MINOR_VERSION to determine, + * which fields in struct kfd_queue_snapshot_entry are valid. This allows + * growing the ABI in a backwards compatible manner. + * Note that entry_size(IN) should still be used to stride the snapshot buffer in the + * event that it's larger than actual kfd_queue_snapshot_entry. + * + * Generic errors apply (see kfd_dbg_trap_operations). + * Return - 0 on SUCCESS. + * Copies @num_queues(IN) queue snapshot entries of size @entry_size(IN) + * into @snapshot_buf_ptr if @num_queues(IN) > 0. + * Otherwise return @num_queues(OUT) queue snapshot entries that exist. + */ +struct kfd_ioctl_dbg_trap_queue_snapshot_args { + __u64 exception_mask; + __u64 snapshot_buf_ptr; + __u32 num_queues; + __u32 entry_size; +}; + +/** + * kfd_ioctl_dbg_trap_get_device_snapshot_args + * + * Arguments for KFD_IOC_DBG_TRAP_GET_DEVICE_SNAPSHOT + * Get device information. + * + * @exception_mask (IN) - exceptions raised to clear + * @snapshot_buf_ptr (IN) - pointer to snapshot buffer (see kfd_dbg_device_info_entry) + * @num_devices (IN/OUT) - number of debug devices to snapshot + * The debugger specifies the size of the array allocated in @num_devices. + * KFD returns the number of devices that actually existed. If this is + * larger than the size specified by the debugger, KFD will not overflow + * the array allocated by the debugger. + * + * @entry_size (IN/OUT) - size per entry in bytes + * The debugger specifies sizeof(struct kfd_dbg_device_info_entry) in + * @entry_size. KFD returns the number of bytes actually populated. The + * debugger should use KFD_IOCTL_MINOR_VERSION to determine, which fields + * in struct kfd_dbg_device_info_entry are valid. This allows growing the + * ABI in a backwards compatible manner. + * Note that entry_size(IN) should still be used to stride the snapshot buffer in the + * event that it's larger than actual kfd_dbg_device_info_entry. + * + * Generic errors apply (see kfd_dbg_trap_operations). + * Return - 0 on SUCCESS. + * Copies @num_devices(IN) device snapshot entries of size @entry_size(IN) + * into @snapshot_buf_ptr if @num_devices(IN) > 0. + * Otherwise return @num_devices(OUT) queue snapshot entries that exist. + */ +struct kfd_ioctl_dbg_trap_device_snapshot_args { + __u64 exception_mask; + __u64 snapshot_buf_ptr; + __u32 num_devices; + __u32 entry_size; +}; + +/** + * kfd_ioctl_dbg_trap_args + * + * Arguments to debug target process. + * + * @pid - target process to debug + * @op - debug operation (see kfd_dbg_trap_operations) + * + * @op determines which union struct args to use. + * Refer to kern docs for each kfd_ioctl_dbg_trap_*_args struct. + */ +struct kfd_ioctl_dbg_trap_args { + __u32 pid; + __u32 op; + + union { + struct kfd_ioctl_dbg_trap_enable_args enable; + struct kfd_ioctl_dbg_trap_send_runtime_event_args send_runtime_event; + struct kfd_ioctl_dbg_trap_set_exceptions_enabled_args set_exceptions_enabled; + struct kfd_ioctl_dbg_trap_set_wave_launch_override_args launch_override; + struct kfd_ioctl_dbg_trap_set_wave_launch_mode_args launch_mode; + struct kfd_ioctl_dbg_trap_suspend_queues_args suspend_queues; + struct kfd_ioctl_dbg_trap_resume_queues_args resume_queues; + struct kfd_ioctl_dbg_trap_set_node_address_watch_args set_node_address_watch; + struct kfd_ioctl_dbg_trap_clear_node_address_watch_args clear_node_address_watch; + struct kfd_ioctl_dbg_trap_set_flags_args set_flags; + struct kfd_ioctl_dbg_trap_query_debug_event_args query_debug_event; + struct kfd_ioctl_dbg_trap_query_exception_info_args query_exception_info; + struct kfd_ioctl_dbg_trap_queue_snapshot_args queue_snapshot; + struct kfd_ioctl_dbg_trap_device_snapshot_args device_snapshot; + }; +}; + #define AMDKFD_IOCTL_BASE 'K' #define AMDKFD_IO(nr) _IO(AMDKFD_IOCTL_BASE, nr) #define AMDKFD_IOR(nr, type) _IOR(AMDKFD_IOCTL_BASE, nr, type) @@ -877,7 +1554,16 @@ struct kfd_ioctl_set_xnack_mode_args { #define AMDKFD_IOC_AVAILABLE_MEMORY \ AMDKFD_IOWR(0x23, struct kfd_ioctl_get_available_memory_args) +#define AMDKFD_IOC_EXPORT_DMABUF \ + AMDKFD_IOWR(0x24, struct kfd_ioctl_export_dmabuf_args) + +#define AMDKFD_IOC_RUNTIME_ENABLE \ + AMDKFD_IOWR(0x25, struct kfd_ioctl_runtime_enable_args) + +#define AMDKFD_IOC_DBG_TRAP \ + AMDKFD_IOWR(0x26, struct kfd_ioctl_dbg_trap_args) + #define AMDKFD_COMMAND_START 0x01 -#define AMDKFD_COMMAND_END 0x24 +#define AMDKFD_COMMAND_END 0x27 #endif diff --git a/include/uapi/linux/kfd_sysfs.h b/include/uapi/linux/kfd_sysfs.h index 3e330f368917..a51b7331e0b4 100644 --- a/include/uapi/linux/kfd_sysfs.h +++ b/include/uapi/linux/kfd_sysfs.h @@ -43,6 +43,11 @@ #define HSA_CAP_DOORBELL_TYPE_2_0 0x2 #define HSA_CAP_AQL_QUEUE_DOUBLE_MAP 0x00004000 +#define HSA_CAP_TRAP_DEBUG_SUPPORT 0x00008000 +#define HSA_CAP_TRAP_DEBUG_WAVE_LAUNCH_TRAP_OVERRIDE_SUPPORTED 0x00010000 +#define HSA_CAP_TRAP_DEBUG_WAVE_LAUNCH_MODE_SUPPORTED 0x00020000 +#define HSA_CAP_TRAP_DEBUG_PRECISE_MEMORY_OPERATIONS_SUPPORTED 0x00040000 + /* Old buggy user mode depends on this being 0 */ #define HSA_CAP_RESERVED_WAS_SRAM_EDCSUPPORTED 0x00080000 @@ -53,8 +58,18 @@ #define HSA_CAP_SRAM_EDCSUPPORTED 0x04000000 #define HSA_CAP_SVMAPI_SUPPORTED 0x08000000 #define HSA_CAP_FLAGS_COHERENTHOSTACCESS 0x10000000 +#define HSA_CAP_TRAP_DEBUG_FIRMWARE_SUPPORTED 0x20000000 #define HSA_CAP_RESERVED 0xe00f8000 +/* debug_prop bits in node properties */ +#define HSA_DBG_WATCH_ADDR_MASK_LO_BIT_MASK 0x0000000f +#define HSA_DBG_WATCH_ADDR_MASK_LO_BIT_SHIFT 0 +#define HSA_DBG_WATCH_ADDR_MASK_HI_BIT_MASK 0x000003f0 +#define HSA_DBG_WATCH_ADDR_MASK_HI_BIT_SHIFT 4 +#define HSA_DBG_DISPATCH_INFO_ALWAYS_VALID 0x00000400 +#define HSA_DBG_WATCHPOINTS_EXCLUSIVE 0x00000800 +#define HSA_DBG_RESERVED 0xfffffffffffff000ull + /* Heap types in memory properties */ #define HSA_MEM_HEAP_TYPE_SYSTEM 0 #define HSA_MEM_HEAP_TYPE_FB_PUBLIC 1 diff --git a/include/uapi/linux/kvm.h b/include/uapi/linux/kvm.h index d77aef872a0a..13065dd96132 100644 --- a/include/uapi/linux/kvm.h +++ b/include/uapi/linux/kvm.h @@ -341,8 +341,13 @@ struct kvm_run { __u64 nr; __u64 args[6]; __u64 ret; - __u32 longmode; - __u32 pad; + + union { +#ifndef __KERNEL__ + __u32 longmode; +#endif + __u64 flags; + }; } hypercall; /* KVM_EXIT_TPR_ACCESS */ struct { @@ -1184,6 +1189,9 @@ struct kvm_ppc_resize_hpt { #define KVM_CAP_S390_PROTECTED_ASYNC_DISABLE 224 #define KVM_CAP_DIRTY_LOG_RING_WITH_BITMAP 225 #define KVM_CAP_PMU_EVENT_MASKED_EVENTS 226 +#define KVM_CAP_COUNTER_OFFSET 227 +#define KVM_CAP_ARM_EAGER_SPLIT_CHUNK_SIZE 228 +#define KVM_CAP_ARM_SUPPORTED_BLOCK_SIZES 229 #ifdef KVM_CAP_IRQ_ROUTING @@ -1410,9 +1418,16 @@ struct kvm_device_attr { __u64 addr; /* userspace address of attr data */ }; -#define KVM_DEV_VFIO_GROUP 1 -#define KVM_DEV_VFIO_GROUP_ADD 1 -#define KVM_DEV_VFIO_GROUP_DEL 2 +#define KVM_DEV_VFIO_FILE 1 + +#define KVM_DEV_VFIO_FILE_ADD 1 +#define KVM_DEV_VFIO_FILE_DEL 2 + +/* KVM_DEV_VFIO_GROUP aliases are for compile time uapi compatibility */ +#define KVM_DEV_VFIO_GROUP KVM_DEV_VFIO_FILE + +#define KVM_DEV_VFIO_GROUP_ADD KVM_DEV_VFIO_FILE_ADD +#define KVM_DEV_VFIO_GROUP_DEL KVM_DEV_VFIO_FILE_DEL #define KVM_DEV_VFIO_GROUP_SET_SPAPR_TCE 3 enum kvm_device_type { @@ -1436,6 +1451,8 @@ enum kvm_device_type { #define KVM_DEV_TYPE_XIVE KVM_DEV_TYPE_XIVE KVM_DEV_TYPE_ARM_PV_TIME, #define KVM_DEV_TYPE_ARM_PV_TIME KVM_DEV_TYPE_ARM_PV_TIME + KVM_DEV_TYPE_RISCV_AIA, +#define KVM_DEV_TYPE_RISCV_AIA KVM_DEV_TYPE_RISCV_AIA KVM_DEV_TYPE_MAX, }; @@ -1451,7 +1468,7 @@ struct kvm_vfio_spapr_tce { #define KVM_CREATE_VCPU _IO(KVMIO, 0x41) #define KVM_GET_DIRTY_LOG _IOW(KVMIO, 0x42, struct kvm_dirty_log) #define KVM_SET_NR_MMU_PAGES _IO(KVMIO, 0x44) -#define KVM_GET_NR_MMU_PAGES _IO(KVMIO, 0x45) +#define KVM_GET_NR_MMU_PAGES _IO(KVMIO, 0x45) /* deprecated */ #define KVM_SET_USER_MEMORY_REGION _IOW(KVMIO, 0x46, \ struct kvm_userspace_memory_region) #define KVM_SET_TSS_ADDR _IO(KVMIO, 0x47) @@ -1543,6 +1560,8 @@ struct kvm_s390_ucas_mapping { #define KVM_SET_PMU_EVENT_FILTER _IOW(KVMIO, 0xb2, struct kvm_pmu_event_filter) #define KVM_PPC_SVM_OFF _IO(KVMIO, 0xb3) #define KVM_ARM_MTE_COPY_TAGS _IOR(KVMIO, 0xb4, struct kvm_arm_copy_mte_tags) +/* Available with KVM_CAP_COUNTER_OFFSET */ +#define KVM_ARM_SET_COUNTER_OFFSET _IOW(KVMIO, 0xb5, struct kvm_arm_counter_offset) /* ioctl for vm fd */ #define KVM_CREATE_DEVICE _IOWR(KVMIO, 0xe0, struct kvm_create_device) @@ -1605,7 +1624,7 @@ struct kvm_s390_ucas_mapping { #define KVM_GET_DEBUGREGS _IOR(KVMIO, 0xa1, struct kvm_debugregs) #define KVM_SET_DEBUGREGS _IOW(KVMIO, 0xa2, struct kvm_debugregs) /* - * vcpu version available with KVM_ENABLE_CAP + * vcpu version available with KVM_CAP_ENABLE_CAP * vm version available with KVM_CAP_ENABLE_CAP_VM */ #define KVM_ENABLE_CAP _IOW(KVMIO, 0xa3, struct kvm_enable_cap) diff --git a/include/uapi/linux/mdio.h b/include/uapi/linux/mdio.h index 256b463e47a6..d03863da180e 100644 --- a/include/uapi/linux/mdio.h +++ b/include/uapi/linux/mdio.h @@ -82,6 +82,8 @@ #define MDIO_AN_10BT1_AN_CTRL 526 /* 10BASE-T1 AN control register */ #define MDIO_AN_10BT1_AN_STAT 527 /* 10BASE-T1 AN status register */ #define MDIO_PMA_PMD_BT1_CTRL 2100 /* BASE-T1 PMA/PMD control register */ +#define MDIO_PCS_1000BT1_CTRL 2304 /* 1000BASE-T1 PCS control register */ +#define MDIO_PCS_1000BT1_STAT 2305 /* 1000BASE-T1 PCS status register */ /* LASI (Link Alarm Status Interrupt) registers, defined by XENPAK MSA. */ #define MDIO_PMA_LASI_RXCTRL 0x9000 /* RX_ALARM control */ @@ -231,6 +233,30 @@ #define MDIO_PMA_EXTABLE_BT1 0x0800 /* BASE-T1 ability */ #define MDIO_PMA_EXTABLE_NBT 0x4000 /* 2.5/5GBASE-T ability */ +/* AN Clause 73 linkword */ +#define MDIO_AN_C73_0_S_MASK GENMASK(4, 0) +#define MDIO_AN_C73_0_E_MASK GENMASK(9, 5) +#define MDIO_AN_C73_0_PAUSE BIT(10) +#define MDIO_AN_C73_0_ASM_DIR BIT(11) +#define MDIO_AN_C73_0_C2 BIT(12) +#define MDIO_AN_C73_0_RF BIT(13) +#define MDIO_AN_C73_0_ACK BIT(14) +#define MDIO_AN_C73_0_NP BIT(15) +#define MDIO_AN_C73_1_T_MASK GENMASK(4, 0) +#define MDIO_AN_C73_1_1000BASE_KX BIT(5) +#define MDIO_AN_C73_1_10GBASE_KX4 BIT(6) +#define MDIO_AN_C73_1_10GBASE_KR BIT(7) +#define MDIO_AN_C73_1_40GBASE_KR4 BIT(8) +#define MDIO_AN_C73_1_40GBASE_CR4 BIT(9) +#define MDIO_AN_C73_1_100GBASE_CR10 BIT(10) +#define MDIO_AN_C73_1_100GBASE_KP4 BIT(11) +#define MDIO_AN_C73_1_100GBASE_KR4 BIT(12) +#define MDIO_AN_C73_1_100GBASE_CR4 BIT(13) +#define MDIO_AN_C73_1_25GBASE_R_S BIT(14) +#define MDIO_AN_C73_1_25GBASE_R BIT(15) +#define MDIO_AN_C73_2_2500BASE_KX BIT(0) +#define MDIO_AN_C73_2_5GBASE_KR BIT(1) + /* PHY XGXS lane state register. */ #define MDIO_PHYXS_LNSTAT_SYNC0 0x0001 #define MDIO_PHYXS_LNSTAT_SYNC1 0x0002 @@ -308,6 +334,8 @@ #define MDIO_PCS_10T1L_CTRL_RESET 0x8000 /* PCS reset */ /* BASE-T1 PMA/PMD extended ability register. */ +#define MDIO_PMA_PMD_BT1_B100_ABLE 0x0001 /* 100BASE-T1 Ability */ +#define MDIO_PMA_PMD_BT1_B1000_ABLE 0x0002 /* 1000BASE-T1 Ability */ #define MDIO_PMA_PMD_BT1_B10L_ABLE 0x0004 /* 10BASE-T1L Ability */ /* BASE-T1 auto-negotiation advertisement register [15:0] */ @@ -349,7 +377,19 @@ #define MDIO_AN_10BT1_AN_STAT_LPA_EEE_T1L 0x4000 /* 10BASE-T1L LP EEE ability advertisement */ /* BASE-T1 PMA/PMD control register */ -#define MDIO_PMA_PMD_BT1_CTRL_CFG_MST 0x4000 /* MASTER-SLAVE config value */ +#define MDIO_PMA_PMD_BT1_CTRL_STRAP 0x000F /* Type selection (Strap) */ +#define MDIO_PMA_PMD_BT1_CTRL_STRAP_B1000 0x0001 /* Select 1000BASE-T1 */ +#define MDIO_PMA_PMD_BT1_CTRL_CFG_MST 0x4000 /* MASTER-SLAVE config value */ + +/* 1000BASE-T1 PCS control register */ +#define MDIO_PCS_1000BT1_CTRL_LOW_POWER 0x0800 /* Low power mode */ +#define MDIO_PCS_1000BT1_CTRL_DISABLE_TX 0x4000 /* Global PMA transmit disable */ +#define MDIO_PCS_1000BT1_CTRL_RESET 0x8000 /* Software reset value */ + +/* 1000BASE-T1 PCS status register */ +#define MDIO_PCS_1000BT1_STAT_LINK 0x0004 /* PCS Link is up */ +#define MDIO_PCS_1000BT1_STAT_FAULT 0x0080 /* There is a fault condition */ + /* EEE Supported/Advertisement/LP Advertisement registers. * diff --git a/include/uapi/linux/media.h b/include/uapi/linux/media.h index 3ddadaea849f..1c80b1d6bbaf 100644 --- a/include/uapi/linux/media.h +++ b/include/uapi/linux/media.h @@ -140,8 +140,8 @@ struct media_device_info { #define MEDIA_ENT_F_DV_ENCODER (MEDIA_ENT_F_BASE + 0x6002) /* Entity flags */ -#define MEDIA_ENT_FL_DEFAULT (1 << 0) -#define MEDIA_ENT_FL_CONNECTOR (1 << 1) +#define MEDIA_ENT_FL_DEFAULT (1U << 0) +#define MEDIA_ENT_FL_CONNECTOR (1U << 1) /* OR with the entity id value to find the next entity */ #define MEDIA_ENT_ID_FLAG_NEXT (1U << 31) @@ -205,9 +205,9 @@ struct media_entity_desc { }; }; -#define MEDIA_PAD_FL_SINK (1 << 0) -#define MEDIA_PAD_FL_SOURCE (1 << 1) -#define MEDIA_PAD_FL_MUST_CONNECT (1 << 2) +#define MEDIA_PAD_FL_SINK (1U << 0) +#define MEDIA_PAD_FL_SOURCE (1U << 1) +#define MEDIA_PAD_FL_MUST_CONNECT (1U << 2) struct media_pad_desc { __u32 entity; /* entity ID */ @@ -216,14 +216,14 @@ struct media_pad_desc { __u32 reserved[2]; }; -#define MEDIA_LNK_FL_ENABLED (1 << 0) -#define MEDIA_LNK_FL_IMMUTABLE (1 << 1) -#define MEDIA_LNK_FL_DYNAMIC (1 << 2) +#define MEDIA_LNK_FL_ENABLED (1U << 0) +#define MEDIA_LNK_FL_IMMUTABLE (1U << 1) +#define MEDIA_LNK_FL_DYNAMIC (1U << 2) #define MEDIA_LNK_FL_LINK_TYPE (0xf << 28) -# define MEDIA_LNK_FL_DATA_LINK (0 << 28) -# define MEDIA_LNK_FL_INTERFACE_LINK (1 << 28) -# define MEDIA_LNK_FL_ANCILLARY_LINK (2 << 28) +# define MEDIA_LNK_FL_DATA_LINK (0U << 28) +# define MEDIA_LNK_FL_INTERFACE_LINK (1U << 28) +# define MEDIA_LNK_FL_ANCILLARY_LINK (2U << 28) struct media_link_desc { struct media_pad_desc source; @@ -293,7 +293,7 @@ struct media_links_enum { * struct media_device_info. */ #define MEDIA_V2_ENTITY_HAS_FLAGS(media_version) \ - ((media_version) >= ((4 << 16) | (19 << 8) | 0)) + ((media_version) >= ((4U << 16) | (19U << 8) | 0U)) struct media_v2_entity { __u32 id; @@ -328,7 +328,7 @@ struct media_v2_interface { * struct media_device_info. */ #define MEDIA_V2_PAD_HAS_INDEX(media_version) \ - ((media_version) >= ((4 << 16) | (19 << 8) | 0)) + ((media_version) >= ((4U << 16) | (19U << 8) | 0U)) struct media_v2_pad { __u32 id; @@ -432,7 +432,7 @@ struct media_v2_topology { #define MEDIA_INTF_T_ALSA_TIMER (MEDIA_INTF_T_ALSA_BASE + 7) /* Obsolete symbol for media_version, no longer used in the kernel */ -#define MEDIA_API_VERSION ((0 << 16) | (1 << 8) | 0) +#define MEDIA_API_VERSION ((0U << 16) | (1U << 8) | 0U) #endif diff --git a/include/uapi/linux/mei.h b/include/uapi/linux/mei.h index 4f3638489d01..6e57743628c0 100644 --- a/include/uapi/linux/mei.h +++ b/include/uapi/linux/mei.h @@ -7,7 +7,7 @@ #ifndef _LINUX_MEI_H #define _LINUX_MEI_H -#include <linux/uuid.h> +#include <linux/mei_uuid.h> /* * This IOCTL is used to associate the current file descriptor with a diff --git a/include/uapi/linux/mei_uuid.h b/include/uapi/linux/mei_uuid.h new file mode 100644 index 000000000000..676ebe12d623 --- /dev/null +++ b/include/uapi/linux/mei_uuid.h @@ -0,0 +1,29 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +/* + * MEI UUID definition + * + * Copyright (C) 2010, Intel Corp. + * Huang Ying <ying.huang@intel.com> + */ + +#ifndef _UAPI_LINUX_MEI_UUID_H_ +#define _UAPI_LINUX_MEI_UUID_H_ + +#include <linux/types.h> + +typedef struct { + __u8 b[16]; +} uuid_le; + +#define UUID_LE(a, b, c, d0, d1, d2, d3, d4, d5, d6, d7) \ +((uuid_le) \ +{{ (a) & 0xff, ((a) >> 8) & 0xff, ((a) >> 16) & 0xff, ((a) >> 24) & 0xff, \ + (b) & 0xff, ((b) >> 8) & 0xff, \ + (c) & 0xff, ((c) >> 8) & 0xff, \ + (d0), (d1), (d2), (d3), (d4), (d5), (d6), (d7) }}) + +#define NULL_UUID_LE \ + UUID_LE(0x00000000, 0x0000, 0x0000, 0x00, 0x00, 0x00, 0x00, \ + 0x00, 0x00, 0x00, 0x00) + +#endif /* _UAPI_LINUX_MEI_UUID_H_ */ diff --git a/include/uapi/linux/mman.h b/include/uapi/linux/mman.h index f55bc680b5b0..a246e11988d5 100644 --- a/include/uapi/linux/mman.h +++ b/include/uapi/linux/mman.h @@ -4,6 +4,7 @@ #include <asm/mman.h> #include <asm-generic/hugetlb_encode.h> +#include <linux/types.h> #define MREMAP_MAYMOVE 1 #define MREMAP_FIXED 2 @@ -41,4 +42,17 @@ #define MAP_HUGE_2GB HUGETLB_FLAG_ENCODE_2GB #define MAP_HUGE_16GB HUGETLB_FLAG_ENCODE_16GB +struct cachestat_range { + __u64 off; + __u64 len; +}; + +struct cachestat { + __u64 nr_cache; + __u64 nr_dirty; + __u64 nr_writeback; + __u64 nr_evicted; + __u64 nr_recently_evicted; +}; + #endif /* _UAPI_LINUX_MMAN_H */ diff --git a/include/uapi/linux/mount.h b/include/uapi/linux/mount.h index 4d93967f8aea..bb242fdcfe6b 100644 --- a/include/uapi/linux/mount.h +++ b/include/uapi/linux/mount.h @@ -74,7 +74,8 @@ #define MOVE_MOUNT_T_AUTOMOUNTS 0x00000020 /* Follow automounts on to path */ #define MOVE_MOUNT_T_EMPTY_PATH 0x00000040 /* Empty to path permitted */ #define MOVE_MOUNT_SET_GROUP 0x00000100 /* Set sharing group instead */ -#define MOVE_MOUNT__MASK 0x00000177 +#define MOVE_MOUNT_BENEATH 0x00000200 /* Mount beneath top mount */ +#define MOVE_MOUNT__MASK 0x00000377 /* * fsopen() flags. @@ -99,8 +100,9 @@ enum fsconfig_command { FSCONFIG_SET_PATH = 3, /* Set parameter, supplying an object by path */ FSCONFIG_SET_PATH_EMPTY = 4, /* Set parameter, supplying an object by (empty) path */ FSCONFIG_SET_FD = 5, /* Set parameter, supplying an object by fd */ - FSCONFIG_CMD_CREATE = 6, /* Invoke superblock creation */ + FSCONFIG_CMD_CREATE = 6, /* Create new or reuse existing superblock */ FSCONFIG_CMD_RECONFIGURE = 7, /* Invoke superblock reconfiguration */ + FSCONFIG_CMD_CREATE_EXCL = 8, /* Create new superblock, fail if reusing existing superblock */ }; /* diff --git a/include/uapi/linux/mptcp.h b/include/uapi/linux/mptcp.h index 32af2d278cb4..ee9c49f949a2 100644 --- a/include/uapi/linux/mptcp.h +++ b/include/uapi/linux/mptcp.h @@ -123,6 +123,11 @@ struct mptcp_info { __u8 mptcpi_local_addr_used; __u8 mptcpi_local_addr_max; __u8 mptcpi_csum_enabled; + __u32 mptcpi_retransmits; + __u64 mptcpi_bytes_retrans; + __u64 mptcpi_bytes_sent; + __u64 mptcpi_bytes_received; + __u64 mptcpi_bytes_acked; }; /* @@ -244,9 +249,33 @@ struct mptcp_subflow_addrs { }; }; +struct mptcp_subflow_info { + __u32 id; + struct mptcp_subflow_addrs addrs; +}; + +struct mptcp_full_info { + __u32 size_tcpinfo_kernel; /* must be 0, set by kernel */ + __u32 size_tcpinfo_user; + __u32 size_sfinfo_kernel; /* must be 0, set by kernel */ + __u32 size_sfinfo_user; + __u32 num_subflows; /* must be 0, set by kernel (real subflow count) */ + __u32 size_arrays_user; /* max subflows that userspace is interested in; + * the buffers at subflow_info/tcp_info + * are respectively at least: + * size_arrays * size_sfinfo_user + * size_arrays * size_tcpinfo_user + * bytes wide + */ + __aligned_u64 subflow_info; + __aligned_u64 tcp_info; + struct mptcp_info mptcp_info; +}; + /* MPTCP socket options */ #define MPTCP_INFO 1 #define MPTCP_TCPINFO 2 #define MPTCP_SUBFLOW_ADDRS 3 +#define MPTCP_FULL_INFO 4 #endif /* _UAPI_MPTCP_H */ diff --git a/include/uapi/linux/nbd.h b/include/uapi/linux/nbd.h index 20d6cc91435d..80ce0ef43afd 100644 --- a/include/uapi/linux/nbd.h +++ b/include/uapi/linux/nbd.h @@ -11,6 +11,8 @@ * Cleanup PARANOIA usage & code. * 2004/02/19 Paul Clements * Removed PARANOIA, plus various cleanup and comments + * 2023 Copyright Red Hat + * Link to userspace extensions, favor cookie over handle. */ #ifndef _UAPILINUX_NBD_H @@ -30,12 +32,18 @@ #define NBD_SET_TIMEOUT _IO( 0xab, 9 ) #define NBD_SET_FLAGS _IO( 0xab, 10) +/* + * See also https://github.com/NetworkBlockDevice/nbd/blob/master/doc/proto.md + * for additional userspace extensions not yet utilized in the kernel module. + */ + enum { NBD_CMD_READ = 0, NBD_CMD_WRITE = 1, NBD_CMD_DISC = 2, NBD_CMD_FLUSH = 3, NBD_CMD_TRIM = 4 + /* userspace defines additional extension commands */ }; /* values for flags field, these are server interaction specific. */ @@ -64,15 +72,19 @@ enum { #define NBD_REQUEST_MAGIC 0x25609513 #define NBD_REPLY_MAGIC 0x67446698 /* Do *not* use magics: 0x12560953 0x96744668. */ +/* magic 0x668e33ef for structured reply not supported by kernel yet */ /* * This is the packet used for communication between client and * server. All data are in network byte order. */ struct nbd_request { - __be32 magic; - __be32 type; /* == READ || == WRITE */ - char handle[8]; + __be32 magic; /* NBD_REQUEST_MAGIC */ + __be32 type; /* See NBD_CMD_* */ + union { + __be64 cookie; /* Opaque identifier for request */ + char handle[8]; /* older spelling of cookie */ + }; __be64 from; __be32 len; } __attribute__((packed)); @@ -82,8 +94,11 @@ struct nbd_request { * it has completed an I/O request (or an error occurs). */ struct nbd_reply { - __be32 magic; + __be32 magic; /* NBD_REPLY_MAGIC */ __be32 error; /* 0 = ok, else error */ - char handle[8]; /* handle you got from request */ + union { + __be64 cookie; /* Opaque identifier from request */ + char handle[8]; /* older spelling of cookie */ + }; }; #endif /* _UAPILINUX_NBD_H */ diff --git a/include/uapi/linux/netdev.h b/include/uapi/linux/netdev.h index 639524b59930..c1634b95c223 100644 --- a/include/uapi/linux/netdev.h +++ b/include/uapi/linux/netdev.h @@ -11,7 +11,7 @@ /** * enum netdev_xdp_act - * @NETDEV_XDP_ACT_BASIC: XDP feautues set supported by all drivers + * @NETDEV_XDP_ACT_BASIC: XDP features set supported by all drivers * (XDP_ABORTED, XDP_DROP, XDP_PASS, XDP_TX) * @NETDEV_XDP_ACT_REDIRECT: The netdev supports XDP_REDIRECT * @NETDEV_XDP_ACT_NDO_XMIT: This feature informs if netdev implements @@ -34,6 +34,7 @@ enum netdev_xdp_act { NETDEV_XDP_ACT_RX_SG = 32, NETDEV_XDP_ACT_NDO_XMIT_SG = 64, + /* private: */ NETDEV_XDP_ACT_MASK = 127, }; @@ -41,6 +42,7 @@ enum { NETDEV_A_DEV_IFINDEX = 1, NETDEV_A_DEV_PAD, NETDEV_A_DEV_XDP_FEATURES, + NETDEV_A_DEV_XDP_ZC_MAX_SEGS, __NETDEV_A_DEV_MAX, NETDEV_A_DEV_MAX = (__NETDEV_A_DEV_MAX - 1) diff --git a/include/uapi/linux/netfilter/nf_tables.h b/include/uapi/linux/netfilter/nf_tables.h index ff677f3a6cad..8466c2a9938f 100644 --- a/include/uapi/linux/netfilter/nf_tables.h +++ b/include/uapi/linux/netfilter/nf_tables.h @@ -105,6 +105,7 @@ enum nft_verdicts { * @NFT_MSG_DESTROYSETELEM: destroy a set element (enum nft_set_elem_attributes) * @NFT_MSG_DESTROYOBJ: destroy a stateful object (enum nft_object_attributes) * @NFT_MSG_DESTROYFLOWTABLE: destroy flow table (enum nft_flowtable_attributes) + * @NFT_MSG_GETSETELEM_RESET: get set elements and reset attached stateful expressions (enum nft_set_elem_attributes) */ enum nf_tables_msg_types { NFT_MSG_NEWTABLE, @@ -140,6 +141,7 @@ enum nf_tables_msg_types { NFT_MSG_DESTROYSETELEM, NFT_MSG_DESTROYOBJ, NFT_MSG_DESTROYFLOWTABLE, + NFT_MSG_GETSETELEM_RESET, NFT_MSG_MAX, }; @@ -685,7 +687,7 @@ enum nft_range_ops { * enum nft_range_attributes - nf_tables range expression netlink attributes * * @NFTA_RANGE_SREG: source register of data to compare (NLA_U32: nft_registers) - * @NFTA_RANGE_OP: cmp operation (NLA_U32: nft_cmp_ops) + * @NFTA_RANGE_OP: cmp operation (NLA_U32: nft_range_ops) * @NFTA_RANGE_FROM_DATA: data range from (NLA_NESTED: nft_data_attributes) * @NFTA_RANGE_TO_DATA: data range to (NLA_NESTED: nft_data_attributes) */ @@ -859,12 +861,14 @@ enum nft_exthdr_flags { * @NFT_EXTHDR_OP_TCP: match against tcp options * @NFT_EXTHDR_OP_IPV4: match against ipv4 options * @NFT_EXTHDR_OP_SCTP: match against sctp chunks + * @NFT_EXTHDR_OP_DCCP: match against dccp otions */ enum nft_exthdr_op { NFT_EXTHDR_OP_IPV6, NFT_EXTHDR_OP_TCPOPT, NFT_EXTHDR_OP_IPV4, NFT_EXTHDR_OP_SCTP, + NFT_EXTHDR_OP_DCCP, __NFT_EXTHDR_OP_MAX }; #define NFT_EXTHDR_OP_MAX (__NFT_EXTHDR_OP_MAX - 1) @@ -878,7 +882,7 @@ enum nft_exthdr_op { * @NFTA_EXTHDR_LEN: extension header length (NLA_U32) * @NFTA_EXTHDR_FLAGS: extension header flags (NLA_U32) * @NFTA_EXTHDR_OP: option match type (NLA_U32) - * @NFTA_EXTHDR_SREG: option match type (NLA_U32) + * @NFTA_EXTHDR_SREG: source register (NLA_U32: nft_registers) */ enum nft_exthdr_attributes { NFTA_EXTHDR_UNSPEC, @@ -931,6 +935,7 @@ enum nft_exthdr_attributes { * @NFT_META_TIME_HOUR: hour of day (in seconds) * @NFT_META_SDIF: slave device interface index * @NFT_META_SDIFNAME: slave device interface name + * @NFT_META_BRI_BROUTE: packet br_netfilter_broute bit */ enum nft_meta_keys { NFT_META_LEN, @@ -969,6 +974,7 @@ enum nft_meta_keys { NFT_META_TIME_HOUR, NFT_META_SDIF, NFT_META_SDIFNAME, + NFT_META_BRI_BROUTE, __NFT_META_IIFTYPE, }; @@ -1260,10 +1266,10 @@ enum nft_last_attributes { /** * enum nft_log_attributes - nf_tables log expression netlink attributes * - * @NFTA_LOG_GROUP: netlink group to send messages to (NLA_U32) + * @NFTA_LOG_GROUP: netlink group to send messages to (NLA_U16) * @NFTA_LOG_PREFIX: prefix to prepend to log messages (NLA_STRING) * @NFTA_LOG_SNAPLEN: length of payload to include in netlink message (NLA_U32) - * @NFTA_LOG_QTHRESHOLD: queue threshold (NLA_U32) + * @NFTA_LOG_QTHRESHOLD: queue threshold (NLA_U16) * @NFTA_LOG_LEVEL: log level (NLA_U32) * @NFTA_LOG_FLAGS: logging flags (NLA_U32) */ diff --git a/include/uapi/linux/netfilter/nfnetlink_hook.h b/include/uapi/linux/netfilter/nfnetlink_hook.h index bbcd285b22e1..84a561a74b98 100644 --- a/include/uapi/linux/netfilter/nfnetlink_hook.h +++ b/include/uapi/linux/netfilter/nfnetlink_hook.h @@ -32,8 +32,12 @@ enum nfnl_hook_attributes { /** * enum nfnl_hook_chain_info_attributes - chain description * - * NFNLA_HOOK_INFO_DESC: nft chain and table name (enum nft_table_attributes) (NLA_NESTED) - * NFNLA_HOOK_INFO_TYPE: chain type (enum nfnl_hook_chaintype) (NLA_U32) + * @NFNLA_HOOK_INFO_DESC: nft chain and table name (NLA_NESTED) + * @NFNLA_HOOK_INFO_TYPE: chain type (enum nfnl_hook_chaintype) (NLA_U32) + * + * NFNLA_HOOK_INFO_DESC depends on NFNLA_HOOK_INFO_TYPE value: + * NFNL_HOOK_TYPE_NFTABLES: enum nft_table_attributes + * NFNL_HOOK_TYPE_BPF: enum nfnl_hook_bpf_attributes */ enum nfnl_hook_chain_info_attributes { NFNLA_HOOK_INFO_UNSPEC, @@ -55,10 +59,24 @@ enum nfnl_hook_chain_desc_attributes { /** * enum nfnl_hook_chaintype - chain type * - * @NFNL_HOOK_TYPE_NFTABLES nf_tables base chain + * @NFNL_HOOK_TYPE_NFTABLES: nf_tables base chain + * @NFNL_HOOK_TYPE_BPF: bpf program */ enum nfnl_hook_chaintype { NFNL_HOOK_TYPE_NFTABLES = 0x1, + NFNL_HOOK_TYPE_BPF, +}; + +/** + * enum nfnl_hook_bpf_attributes - bpf prog description + * + * @NFNLA_HOOK_BPF_ID: bpf program id (NLA_U32) + */ +enum nfnl_hook_bpf_attributes { + NFNLA_HOOK_BPF_UNSPEC, + NFNLA_HOOK_BPF_ID, + __NFNLA_HOOK_BPF_MAX, }; +#define NFNLA_HOOK_BPF_MAX (__NFNLA_HOOK_BPF_MAX - 1) #endif /* _NFNL_HOOK_H */ diff --git a/include/uapi/linux/netfilter/nfnetlink_queue.h b/include/uapi/linux/netfilter/nfnetlink_queue.h index ef7c97f21a15..efcb7c044a74 100644 --- a/include/uapi/linux/netfilter/nfnetlink_queue.h +++ b/include/uapi/linux/netfilter/nfnetlink_queue.h @@ -62,6 +62,7 @@ enum nfqnl_attr_type { NFQA_VLAN, /* nested attribute: packet vlan info */ NFQA_L2HDR, /* full L2 header */ NFQA_PRIORITY, /* skb->priority */ + NFQA_CGROUP_CLASSID, /* __u32 cgroup classid */ __NFQA_MAX }; diff --git a/include/uapi/linux/netfilter_bridge/ebtables.h b/include/uapi/linux/netfilter_bridge/ebtables.h index a494cf43a755..4ff328f3d339 100644 --- a/include/uapi/linux/netfilter_bridge/ebtables.h +++ b/include/uapi/linux/netfilter_bridge/ebtables.h @@ -87,7 +87,7 @@ struct ebt_entries { /* nr. of entries */ unsigned int nentries; /* entry list */ - char data[0] __attribute__ ((aligned (__alignof__(struct ebt_replace)))); + char data[] __attribute__ ((aligned (__alignof__(struct ebt_replace)))); }; /* used for the bitmask of struct ebt_entry */ @@ -129,7 +129,7 @@ struct ebt_entry_match { } u; /* size of data */ unsigned int match_size; - unsigned char data[0] __attribute__ ((aligned (__alignof__(struct ebt_replace)))); + unsigned char data[] __attribute__ ((aligned (__alignof__(struct ebt_replace)))); }; struct ebt_entry_watcher { @@ -142,7 +142,7 @@ struct ebt_entry_watcher { } u; /* size of data */ unsigned int watcher_size; - unsigned char data[0] __attribute__ ((aligned (__alignof__(struct ebt_replace)))); + unsigned char data[] __attribute__ ((aligned (__alignof__(struct ebt_replace)))); }; struct ebt_entry_target { @@ -182,13 +182,15 @@ struct ebt_entry { unsigned char sourcemsk[ETH_ALEN]; unsigned char destmac[ETH_ALEN]; unsigned char destmsk[ETH_ALEN]; - /* sizeof ebt_entry + matches */ - unsigned int watchers_offset; - /* sizeof ebt_entry + matches + watchers */ - unsigned int target_offset; - /* sizeof ebt_entry + matches + watchers + target */ - unsigned int next_offset; - unsigned char elems[0] __attribute__ ((aligned (__alignof__(struct ebt_replace)))); + __struct_group(/* no tag */, offsets, /* no attrs */, + /* sizeof ebt_entry + matches */ + unsigned int watchers_offset; + /* sizeof ebt_entry + matches + watchers */ + unsigned int target_offset; + /* sizeof ebt_entry + matches + watchers + target */ + unsigned int next_offset; + ); + unsigned char elems[] __attribute__ ((aligned (__alignof__(struct ebt_replace)))); }; static __inline__ struct ebt_entry_target * diff --git a/include/uapi/linux/nfsd/export.h b/include/uapi/linux/nfsd/export.h index 2124ba904779..a73ca3703abb 100644 --- a/include/uapi/linux/nfsd/export.h +++ b/include/uapi/linux/nfsd/export.h @@ -62,5 +62,18 @@ | NFSEXP_ALLSQUASH \ | NFSEXP_INSECURE_PORT) +/* + * Transport layer security policies that are permitted to access + * an export + */ +#define NFSEXP_XPRTSEC_NONE 0x0001 +#define NFSEXP_XPRTSEC_TLS 0x0002 +#define NFSEXP_XPRTSEC_MTLS 0x0004 + +#define NFSEXP_XPRTSEC_NUM (3) + +#define NFSEXP_XPRTSEC_ALL (NFSEXP_XPRTSEC_NONE | \ + NFSEXP_XPRTSEC_TLS | \ + NFSEXP_XPRTSEC_MTLS) #endif /* _UAPINFSD_EXPORT_H */ diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index f14621a954e1..88eb85c63029 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -11,7 +11,7 @@ * Copyright 2008 Jouni Malinen <jouni.malinen@atheros.com> * Copyright 2008 Colin McCabe <colin@cozybit.com> * Copyright 2015-2017 Intel Deutschland GmbH - * Copyright (C) 2018-2022 Intel Corporation + * Copyright (C) 2018-2023 Intel Corporation * * Permission to use, copy, modify, and/or distribute this software for any * purpose with or without fee is hereby granted, provided that the above @@ -1299,6 +1299,21 @@ * @NL80211_CMD_MODIFY_LINK_STA: Modify a link of an MLD station * @NL80211_CMD_REMOVE_LINK_STA: Remove a link of an MLD station * + * @NL80211_CMD_SET_HW_TIMESTAMP: Enable/disable HW timestamping of Timing + * measurement and Fine timing measurement frames. If %NL80211_ATTR_MAC + * is included, enable/disable HW timestamping only for frames to/from the + * specified MAC address. Otherwise enable/disable HW timestamping for + * all TM/FTM frames (including ones that were enabled with specific MAC + * address). If %NL80211_ATTR_HW_TIMESTAMP_ENABLED is not included, disable + * HW timestamping. + * The number of peers that HW timestamping can be enabled for concurrently + * is indicated by %NL80211_ATTR_MAX_HW_TIMESTAMP_PEERS. + * + * @NL80211_CMD_LINKS_REMOVED: Notify userspace about the removal of STA MLD + * setup links due to AP MLD removing the corresponding affiliated APs with + * Multi-Link reconfiguration. %NL80211_ATTR_MLO_LINKS is used to provide + * information about the removed STA MLD setup links. + * * @NL80211_CMD_MAX: highest used command number * @__NL80211_CMD_AFTER_LAST: internal use */ @@ -1550,6 +1565,10 @@ enum nl80211_commands { NL80211_CMD_MODIFY_LINK_STA, NL80211_CMD_REMOVE_LINK_STA, + NL80211_CMD_SET_HW_TIMESTAMP, + + NL80211_CMD_LINKS_REMOVED, + /* add new commands above here */ /* used to define NL80211_CMD_MAX below */ @@ -2775,6 +2794,27 @@ enum nl80211_commands { * indicates that the sub-channel is punctured. Higher 16 bits are * reserved. * + * @NL80211_ATTR_MAX_HW_TIMESTAMP_PEERS: Maximum number of peers that HW + * timestamping can be enabled for concurrently (u16), a wiphy attribute. + * A value of 0xffff indicates setting for all peers (i.e. not specifying + * an address with %NL80211_CMD_SET_HW_TIMESTAMP) is supported. + * @NL80211_ATTR_HW_TIMESTAMP_ENABLED: Indicates whether HW timestamping should + * be enabled or not (flag attribute). + * + * @NL80211_ATTR_EMA_RNR_ELEMS: Optional nested attribute for + * reduced neighbor report (RNR) elements. This attribute can be used + * only when NL80211_MBSSID_CONFIG_ATTR_EMA is enabled. + * Userspace is responsible for splitting the RNR into multiple + * elements such that each element excludes the non-transmitting + * profiles already included in the MBSSID element + * (%NL80211_ATTR_MBSSID_ELEMS) at the same index. Each EMA beacon + * will be generated by adding MBSSID and RNR elements at the same + * index. If the userspace includes more RNR elements than number of + * MBSSID elements then these will be added in every EMA beacon. + * + * @NL80211_ATTR_MLO_LINK_DISABLED: Flag attribute indicating that the link is + * disabled. + * * @NUM_NL80211_ATTR: total number of nl80211_attrs available * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use @@ -3306,6 +3346,13 @@ enum nl80211_attrs { NL80211_ATTR_PUNCT_BITMAP, + NL80211_ATTR_MAX_HW_TIMESTAMP_PEERS, + NL80211_ATTR_HW_TIMESTAMP_ENABLED, + + NL80211_ATTR_EMA_RNR_ELEMS, + + NL80211_ATTR_MLO_LINK_DISABLED, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, @@ -3632,6 +3679,13 @@ enum nl80211_eht_ru_alloc { * (u8, see &enum nl80211_eht_gi) * @NL80211_RATE_INFO_EHT_RU_ALLOC: EHT RU allocation, if not present then * non-OFDMA was used (u8, see &enum nl80211_eht_ru_alloc) + * @NL80211_RATE_INFO_S1G_MCS: S1G MCS index (u8, 0-10) + * @NL80211_RATE_INFO_S1G_NSS: S1G NSS value (u8, 1-4) + * @NL80211_RATE_INFO_1_MHZ_WIDTH: 1 MHz S1G rate + * @NL80211_RATE_INFO_2_MHZ_WIDTH: 2 MHz S1G rate + * @NL80211_RATE_INFO_4_MHZ_WIDTH: 4 MHz S1G rate + * @NL80211_RATE_INFO_8_MHZ_WIDTH: 8 MHz S1G rate + * @NL80211_RATE_INFO_16_MHZ_WIDTH: 16 MHz S1G rate * @__NL80211_RATE_INFO_AFTER_LAST: internal use */ enum nl80211_rate_info { @@ -3658,6 +3712,13 @@ enum nl80211_rate_info { NL80211_RATE_INFO_EHT_NSS, NL80211_RATE_INFO_EHT_GI, NL80211_RATE_INFO_EHT_RU_ALLOC, + NL80211_RATE_INFO_S1G_MCS, + NL80211_RATE_INFO_S1G_NSS, + NL80211_RATE_INFO_1_MHZ_WIDTH, + NL80211_RATE_INFO_2_MHZ_WIDTH, + NL80211_RATE_INFO_4_MHZ_WIDTH, + NL80211_RATE_INFO_8_MHZ_WIDTH, + NL80211_RATE_INFO_16_MHZ_WIDTH, /* keep last */ __NL80211_RATE_INFO_AFTER_LAST, @@ -4026,6 +4087,10 @@ enum nl80211_band_iftype_attr { * @NL80211_BAND_ATTR_EDMG_BW_CONFIG: Channel BW Configuration subfield encodes * the allowed channel bandwidth configurations. * Defined by IEEE P802.11ay/D4.0 section 9.4.2.251, Table 13. + * @NL80211_BAND_ATTR_S1G_MCS_NSS_SET: S1G capabilities, supported S1G-MCS and NSS + * set subfield, as in the S1G information IE, 5 bytes + * @NL80211_BAND_ATTR_S1G_CAPA: S1G capabilities information subfield as in the + * S1G information IE, 10 bytes * @NL80211_BAND_ATTR_MAX: highest band attribute currently defined * @__NL80211_BAND_ATTR_AFTER_LAST: internal use */ @@ -4046,6 +4111,9 @@ enum nl80211_band_attr { NL80211_BAND_ATTR_EDMG_CHANNELS, NL80211_BAND_ATTR_EDMG_BW_CONFIG, + NL80211_BAND_ATTR_S1G_MCS_NSS_SET, + NL80211_BAND_ATTR_S1G_CAPA, + /* keep last */ __NL80211_BAND_ATTR_AFTER_LAST, NL80211_BAND_ATTR_MAX = __NL80211_BAND_ATTR_AFTER_LAST - 1 @@ -4382,6 +4450,7 @@ enum nl80211_sched_scan_match_attr { * @NL80211_RRF_NO_160MHZ: 160MHz operation not allowed * @NL80211_RRF_NO_HE: HE operation not allowed * @NL80211_RRF_NO_320MHZ: 320MHz operation not allowed + * @NL80211_RRF_NO_EHT: EHT operation not allowed */ enum nl80211_reg_rule_flags { NL80211_RRF_NO_OFDM = 1<<0, @@ -4401,6 +4470,7 @@ enum nl80211_reg_rule_flags { NL80211_RRF_NO_160MHZ = 1<<16, NL80211_RRF_NO_HE = 1<<17, NL80211_RRF_NO_320MHZ = 1<<18, + NL80211_RRF_NO_EHT = 1<<19, }; #define NL80211_RRF_PASSIVE_SCAN NL80211_RRF_NO_IR @@ -6326,6 +6396,10 @@ enum nl80211_feature_flags { * @NL80211_EXT_FEATURE_SECURE_NAN: Device supports NAN Pairing which enables * authentication, data encryption and message integrity. * + * @NL80211_EXT_FEATURE_AUTH_AND_DEAUTH_RANDOM_TA: Device supports randomized TA + * in authentication and deauthentication frames sent to unassociated peer + * using @NL80211_CMD_FRAME. + * * @NUM_NL80211_EXT_FEATURES: number of extended features. * @MAX_NL80211_EXT_FEATURES: highest extended feature index. */ @@ -6396,6 +6470,7 @@ enum nl80211_ext_feature_index { NL80211_EXT_FEATURE_POWERED_ADDR_CHANGE, NL80211_EXT_FEATURE_PUNCT, NL80211_EXT_FEATURE_SECURE_NAN, + NL80211_EXT_FEATURE_AUTH_AND_DEAUTH_RANDOM_TA, /* add new features before the definition below */ NUM_NL80211_EXT_FEATURES, @@ -6510,8 +6585,16 @@ enum nl80211_timeout_reason { * @NL80211_SCAN_FLAG_FREQ_KHZ: report scan results with * %NL80211_ATTR_SCAN_FREQ_KHZ. This also means * %NL80211_ATTR_SCAN_FREQUENCIES will not be included. - * @NL80211_SCAN_FLAG_COLOCATED_6GHZ: scan for colocated APs reported by - * 2.4/5 GHz APs + * @NL80211_SCAN_FLAG_COLOCATED_6GHZ: scan for collocated APs reported by + * 2.4/5 GHz APs. When the flag is set, the scan logic will use the + * information from the RNR element found in beacons/probe responses + * received on the 2.4/5 GHz channels to actively scan only the 6GHz + * channels on which APs are expected to be found. Note that when not set, + * the scan logic would scan all 6GHz channels, but since transmission of + * probe requests on non PSC channels is limited, it is highly likely that + * these channels would passively be scanned. Also note that when the flag + * is set, in addition to the colocated APs, PSC channels would also be + * scanned if the user space has asked for it. */ enum nl80211_scan_flags { NL80211_SCAN_FLAG_LOW_PRIORITY = 1<<0, diff --git a/include/uapi/linux/openvswitch.h b/include/uapi/linux/openvswitch.h index c5d62ee82567..efc82c318fa2 100644 --- a/include/uapi/linux/openvswitch.h +++ b/include/uapi/linux/openvswitch.h @@ -765,6 +765,7 @@ struct ovs_action_push_vlan { */ enum ovs_hash_alg { OVS_HASH_ALG_L4, + OVS_HASH_ALG_SYM_L4, }; /* @@ -964,6 +965,7 @@ struct check_pkt_len_arg { * start of the packet or at the start of the l3 header depending on the value * of l3 tunnel flag in the tun_flags field of OVS_ACTION_ATTR_ADD_MPLS * argument. + * @OVS_ACTION_ATTR_DROP: Explicit drop action. * * Only a single header can be set with a single %OVS_ACTION_ATTR_SET. Not all * fields within a header are modifiable, e.g. the IPv4 protocol and fragment @@ -1001,6 +1003,7 @@ enum ovs_action_attr { OVS_ACTION_ATTR_CHECK_PKT_LEN, /* Nested OVS_CHECK_PKT_LEN_ATTR_*. */ OVS_ACTION_ATTR_ADD_MPLS, /* struct ovs_action_add_mpls. */ OVS_ACTION_ATTR_DEC_TTL, /* Nested OVS_DEC_TTL_ATTR_*. */ + OVS_ACTION_ATTR_DROP, /* u32 error code. */ __OVS_ACTION_ATTR_MAX, /* Nothing past this will be accepted * from userspace. */ diff --git a/include/uapi/linux/parport.h b/include/uapi/linux/parport.h index f41388f88dc3..fe93e41fc205 100644 --- a/include/uapi/linux/parport.h +++ b/include/uapi/linux/parport.h @@ -90,6 +90,9 @@ typedef enum { /* Flags for block transfer operations. */ #define PARPORT_EPP_FAST (1<<0) /* Unreliable counts. */ #define PARPORT_W91284PIC (1<<1) /* have a Warp9 w91284pic in the device */ +#define PARPORT_EPP_FAST_32 PARPORT_EPP_FAST /* 32-bit EPP transfers */ +#define PARPORT_EPP_FAST_16 (1<<2) /* 16-bit EPP transfers */ +#define PARPORT_EPP_FAST_8 (1<<3) /* 8-bit EPP transfers */ /* The rest is for the kernel only */ #endif /* _UAPI_PARPORT_H_ */ diff --git a/include/uapi/linux/pci_regs.h b/include/uapi/linux/pci_regs.h index dc2000e0fe3a..e5f558d96493 100644 --- a/include/uapi/linux/pci_regs.h +++ b/include/uapi/linux/pci_regs.h @@ -738,6 +738,7 @@ #define PCI_EXT_CAP_ID_DVSEC 0x23 /* Designated Vendor-Specific */ #define PCI_EXT_CAP_ID_DLF 0x25 /* Data Link Feature */ #define PCI_EXT_CAP_ID_PL_16GT 0x26 /* Physical Layer 16.0 GT/s */ +#define PCI_EXT_CAP_ID_PL_32GT 0x2A /* Physical Layer 32.0 GT/s */ #define PCI_EXT_CAP_ID_DOE 0x2E /* Data Object Exchange */ #define PCI_EXT_CAP_ID_MAX PCI_EXT_CAP_ID_DOE diff --git a/include/uapi/linux/perf_event.h b/include/uapi/linux/perf_event.h index 37675437b768..39c6a250dd1b 100644 --- a/include/uapi/linux/perf_event.h +++ b/include/uapi/linux/perf_event.h @@ -1339,7 +1339,8 @@ union perf_mem_data_src { #define PERF_MEM_LVLNUM_L2 0x02 /* L2 */ #define PERF_MEM_LVLNUM_L3 0x03 /* L3 */ #define PERF_MEM_LVLNUM_L4 0x04 /* L4 */ -/* 5-0x8 available */ +/* 5-0x7 available */ +#define PERF_MEM_LVLNUM_UNC 0x08 /* Uncached */ #define PERF_MEM_LVLNUM_CXL 0x09 /* CXL */ #define PERF_MEM_LVLNUM_IO 0x0a /* I/O */ #define PERF_MEM_LVLNUM_ANY_CACHE 0x0b /* Any cache */ diff --git a/include/uapi/linux/pkt_cls.h b/include/uapi/linux/pkt_cls.h index 648a82f32666..c7082cc60d21 100644 --- a/include/uapi/linux/pkt_cls.h +++ b/include/uapi/linux/pkt_cls.h @@ -594,6 +594,13 @@ enum { TCA_FLOWER_KEY_L2TPV3_SID, /* be32 */ + TCA_FLOWER_L2_MISS, /* u8 */ + + TCA_FLOWER_KEY_CFM, /* nested */ + + TCA_FLOWER_KEY_SPI, /* be32 */ + TCA_FLOWER_KEY_SPI_MASK, /* be32 */ + __TCA_FLOWER_MAX, }; @@ -702,6 +709,15 @@ enum { TCA_FLOWER_KEY_FLAGS_FRAG_IS_FIRST = (1 << 1), }; +enum { + TCA_FLOWER_KEY_CFM_OPT_UNSPEC, + TCA_FLOWER_KEY_CFM_MD_LEVEL, + TCA_FLOWER_KEY_CFM_OPCODE, + __TCA_FLOWER_KEY_CFM_OPT_MAX, +}; + +#define TCA_FLOWER_KEY_CFM_OPT_MAX (__TCA_FLOWER_KEY_CFM_OPT_MAX - 1) + #define TCA_FLOWER_MASK_FLAGS_RANGE (1 << 0) /* Range-based match */ /* Match-all classifier */ diff --git a/include/uapi/linux/pkt_sched.h b/include/uapi/linux/pkt_sched.h index 000eec106856..3f85ae578056 100644 --- a/include/uapi/linux/pkt_sched.h +++ b/include/uapi/linux/pkt_sched.h @@ -603,6 +603,7 @@ enum { TCA_NETEM_JITTER64, TCA_NETEM_SLOT, TCA_NETEM_SLOT_DIST, + TCA_NETEM_PRNG_SEED, __TCA_NETEM_MAX, }; @@ -719,6 +720,11 @@ enum { #define __TC_MQPRIO_SHAPER_MAX (__TC_MQPRIO_SHAPER_MAX - 1) +enum { + TC_FP_EXPRESS = 1, + TC_FP_PREEMPTIBLE = 2, +}; + struct tc_mqprio_qopt { __u8 num_tc; __u8 prio_tc_map[TC_QOPT_BITMASK + 1]; @@ -733,11 +739,22 @@ struct tc_mqprio_qopt { #define TC_MQPRIO_F_MAX_RATE 0x8 enum { + TCA_MQPRIO_TC_ENTRY_UNSPEC, + TCA_MQPRIO_TC_ENTRY_INDEX, /* u32 */ + TCA_MQPRIO_TC_ENTRY_FP, /* u32 */ + + /* add new constants above here */ + __TCA_MQPRIO_TC_ENTRY_CNT, + TCA_MQPRIO_TC_ENTRY_MAX = (__TCA_MQPRIO_TC_ENTRY_CNT - 1) +}; + +enum { TCA_MQPRIO_UNSPEC, TCA_MQPRIO_MODE, TCA_MQPRIO_SHAPER, TCA_MQPRIO_MIN_RATE64, TCA_MQPRIO_MAX_RATE64, + TCA_MQPRIO_TC_ENTRY, __TCA_MQPRIO_MAX, }; @@ -1236,6 +1253,7 @@ enum { TCA_TAPRIO_TC_ENTRY_UNSPEC, TCA_TAPRIO_TC_ENTRY_INDEX, /* u32 */ TCA_TAPRIO_TC_ENTRY_MAX_SDU, /* u32 */ + TCA_TAPRIO_TC_ENTRY_FP, /* u32 */ /* add new constants above here */ __TCA_TAPRIO_TC_ENTRY_CNT, @@ -1243,6 +1261,16 @@ enum { }; enum { + TCA_TAPRIO_OFFLOAD_STATS_PAD = 1, /* u64 */ + TCA_TAPRIO_OFFLOAD_STATS_WINDOW_DROPS, /* u64 */ + TCA_TAPRIO_OFFLOAD_STATS_TX_OVERRUNS, /* u64 */ + + /* add new constants above here */ + __TCA_TAPRIO_OFFLOAD_STATS_CNT, + TCA_TAPRIO_OFFLOAD_STATS_MAX = (__TCA_TAPRIO_OFFLOAD_STATS_CNT - 1) +}; + +enum { TCA_TAPRIO_ATTR_UNSPEC, TCA_TAPRIO_ATTR_PRIOMAP, /* struct tc_mqprio_qopt */ TCA_TAPRIO_ATTR_SCHED_ENTRY_LIST, /* nested of entry */ diff --git a/include/uapi/linux/pktcdvd.h b/include/uapi/linux/pktcdvd.h index 6a5552dfd6af..987a3022dc5f 100644 --- a/include/uapi/linux/pktcdvd.h +++ b/include/uapi/linux/pktcdvd.h @@ -16,6 +16,7 @@ #include <linux/types.h> /* + * UNUSED: * 1 for normal debug messages, 2 is very verbose. 0 to turn it off. */ #define PACKET_DEBUG 1 diff --git a/include/uapi/linux/prctl.h b/include/uapi/linux/prctl.h index 1312a137f7fb..3c36aeade991 100644 --- a/include/uapi/linux/prctl.h +++ b/include/uapi/linux/prctl.h @@ -290,4 +290,19 @@ struct prctl_mm_map { #define PR_SET_VMA 0x53564d41 # define PR_SET_VMA_ANON_NAME 0 +#define PR_GET_AUXV 0x41555856 + +#define PR_SET_MEMORY_MERGE 67 +#define PR_GET_MEMORY_MERGE 68 + +#define PR_RISCV_V_SET_CONTROL 69 +#define PR_RISCV_V_GET_CONTROL 70 +# define PR_RISCV_V_VSTATE_CTRL_DEFAULT 0 +# define PR_RISCV_V_VSTATE_CTRL_OFF 1 +# define PR_RISCV_V_VSTATE_CTRL_ON 2 +# define PR_RISCV_V_VSTATE_CTRL_INHERIT (1 << 4) +# define PR_RISCV_V_VSTATE_CTRL_CUR_MASK 0x3 +# define PR_RISCV_V_VSTATE_CTRL_NEXT_MASK 0xc +# define PR_RISCV_V_VSTATE_CTRL_MASK 0x1f + #endif /* _LINUX_PRCTL_H */ diff --git a/include/uapi/linux/psp-dbc.h b/include/uapi/linux/psp-dbc.h new file mode 100644 index 000000000000..b3845a9ff5fd --- /dev/null +++ b/include/uapi/linux/psp-dbc.h @@ -0,0 +1,147 @@ +/* SPDX-License-Identifier: GPL-2.0-only WITH Linux-syscall-note */ +/* + * Userspace interface for AMD Dynamic Boost Control (DBC) + * + * Copyright (C) 2023 Advanced Micro Devices, Inc. + * + * Author: Mario Limonciello <mario.limonciello@amd.com> + */ + +#ifndef __PSP_DBC_USER_H__ +#define __PSP_DBC_USER_H__ + +#include <linux/types.h> + +/** + * DOC: AMD Dynamic Boost Control (DBC) interface + */ + +#define DBC_NONCE_SIZE 16 +#define DBC_SIG_SIZE 32 +#define DBC_UID_SIZE 16 + +/** + * struct dbc_user_nonce - Nonce exchange structure (input/output). + * @auth_needed: Whether the PSP should authenticate this request (input). + * 0: no authentication, PSP will return single use nonce. + * 1: authentication: PSP will return multi-use nonce. + * @nonce: 8 byte value used for future authentication (output). + * @signature: Optional 32 byte signature created by software using a + * previous nonce (input). + */ +struct dbc_user_nonce { + __u32 auth_needed; + __u8 nonce[DBC_NONCE_SIZE]; + __u8 signature[DBC_SIG_SIZE]; +} __packed; + +/** + * struct dbc_user_setuid - UID exchange structure (input). + * @uid: 16 byte value representing software identity + * @signature: 32 byte signature created by software using a previous nonce + */ +struct dbc_user_setuid { + __u8 uid[DBC_UID_SIZE]; + __u8 signature[DBC_SIG_SIZE]; +} __packed; + +/** + * struct dbc_user_param - Parameter exchange structure (input/output). + * @msg_index: Message indicating what parameter to set or get (input) + * @param: 4 byte parameter, units are message specific. (input/output) + * @signature: 32 byte signature. + * - When sending a message this is to be created by software + * using a previous nonce (input) + * - For interpreting results, this signature is updated by the + * PSP to allow software to validate the authenticity of the + * results. + */ +struct dbc_user_param { + __u32 msg_index; + __u32 param; + __u8 signature[DBC_SIG_SIZE]; +} __packed; + +/** + * Dynamic Boost Control (DBC) IOC + * + * possible return codes for all DBC IOCTLs: + * 0: success + * -EINVAL: invalid input + * -E2BIG: excess data passed + * -EFAULT: failed to copy to/from userspace + * -EBUSY: mailbox in recovery or in use + * -ENODEV: driver not bound with PSP device + * -EACCES: request isn't authorized + * -EINVAL: invalid parameter + * -ETIMEDOUT: request timed out + * -EAGAIN: invalid request for state machine + * -ENOENT: not implemented + * -ENFILE: overflow + * -EPERM: invalid signature + * -EIO: unknown error + */ +#define DBC_IOC_TYPE 'D' + +/** + * DBCIOCNONCE - Fetch a nonce from the PSP for authenticating commands. + * If a nonce is fetched without authentication it can only + * be utilized for one command. + * If a nonce is fetched with authentication it can be used + * for multiple requests. + */ +#define DBCIOCNONCE _IOWR(DBC_IOC_TYPE, 0x1, struct dbc_user_nonce) + +/** + * DBCIOCUID - Set the user ID (UID) of a calling process. + * The user ID is 8 bytes long. It must be programmed using a + * 32 byte signature built using the nonce fetched from + * DBCIOCNONCE. + * The UID can only be set once until the system is rebooted. + */ +#define DBCIOCUID _IOW(DBC_IOC_TYPE, 0x2, struct dbc_user_setuid) + +/** + * DBCIOCPARAM - Set or get a parameter from the PSP. + * This request will only work after DBCIOCUID has successfully + * set the UID of the calling process. + * Whether the parameter is set or get is controlled by the + * message ID in the request. + * This command must be sent using a 32 byte signature built + * using the nonce fetched from DBCIOCNONCE. + * When the command succeeds, the 32 byte signature will be + * updated by the PSP for software to authenticate the results. + */ +#define DBCIOCPARAM _IOWR(DBC_IOC_TYPE, 0x3, struct dbc_user_param) + +/** + * enum dbc_cmd_msg - Messages utilized by DBCIOCPARAM + * @PARAM_GET_FMAX_CAP: Get frequency cap (MHz) + * @PARAM_SET_FMAX_CAP: Set frequency cap (MHz) + * @PARAM_GET_PWR_CAP: Get socket power cap (mW) + * @PARAM_SET_PWR_CAP: Set socket power cap (mW) + * @PARAM_GET_GFX_MODE: Get graphics mode (0/1) + * @PARAM_SET_GFX_MODE: Set graphics mode (0/1) + * @PARAM_GET_CURR_TEMP: Get current temperature (degrees C) + * @PARAM_GET_FMAX_MAX: Get maximum allowed value for frequency (MHz) + * @PARAM_GET_FMAX_MIN: Get minimum allowed value for frequency (MHz) + * @PARAM_GET_SOC_PWR_MAX: Get maximum allowed value for SoC power (mw) + * @PARAM_GET_SOC_PWR_MIN: Get minimum allowed value for SoC power (mw) + * @PARAM_GET_SOC_PWR_CUR: Get current value for SoC Power (mW) + */ +enum dbc_cmd_msg { + PARAM_GET_FMAX_CAP = 0x3, + PARAM_SET_FMAX_CAP = 0x4, + PARAM_GET_PWR_CAP = 0x5, + PARAM_SET_PWR_CAP = 0x6, + PARAM_GET_GFX_MODE = 0x7, + PARAM_SET_GFX_MODE = 0x8, + PARAM_GET_CURR_TEMP = 0x9, + PARAM_GET_FMAX_MAX = 0xA, + PARAM_GET_FMAX_MIN = 0xB, + PARAM_GET_SOC_PWR_MAX = 0xC, + PARAM_GET_SOC_PWR_MIN = 0xD, + PARAM_GET_SOC_PWR_CUR = 0xE, +}; + +#endif /* __PSP_DBC_USER_H__ */ diff --git a/include/uapi/linux/ptp_clock.h b/include/uapi/linux/ptp_clock.h index 1d108d597f66..05cc35fc94ac 100644 --- a/include/uapi/linux/ptp_clock.h +++ b/include/uapi/linux/ptp_clock.h @@ -95,7 +95,8 @@ struct ptp_clock_caps { int cross_timestamping; /* Whether the clock supports adjust phase */ int adjust_phase; - int rsv[12]; /* Reserved for future use. */ + int max_phase_adj; /* Maximum phase adjustment in nanoseconds. */ + int rsv[11]; /* Reserved for future use. */ }; struct ptp_extts_request { diff --git a/include/uapi/linux/quota.h b/include/uapi/linux/quota.h index f17c9636a859..52090105b828 100644 --- a/include/uapi/linux/quota.h +++ b/include/uapi/linux/quota.h @@ -77,6 +77,7 @@ #define QFMT_VFS_V0 2 #define QFMT_OCFS2 3 #define QFMT_VFS_V1 4 +#define QFMT_SHMEM 5 /* Size of block in which space limits are passed through the quota * interface */ diff --git a/include/uapi/linux/sctp.h b/include/uapi/linux/sctp.h index ed7d4ecbf53d..b7d91d4cf0db 100644 --- a/include/uapi/linux/sctp.h +++ b/include/uapi/linux/sctp.h @@ -1211,7 +1211,9 @@ enum sctp_sched_type { SCTP_SS_DEFAULT = SCTP_SS_FCFS, SCTP_SS_PRIO, SCTP_SS_RR, - SCTP_SS_MAX = SCTP_SS_RR + SCTP_SS_FC, + SCTP_SS_WFQ, + SCTP_SS_MAX = SCTP_SS_WFQ }; /* Probe Interval socket option */ diff --git a/include/uapi/linux/seccomp.h b/include/uapi/linux/seccomp.h index 0fdc6ef02b94..dbfc9b37fcae 100644 --- a/include/uapi/linux/seccomp.h +++ b/include/uapi/linux/seccomp.h @@ -115,6 +115,8 @@ struct seccomp_notif_resp { __u32 flags; }; +#define SECCOMP_USER_NOTIF_FD_SYNC_WAKE_UP (1UL << 0) + /* valid flags for seccomp_notif_addfd */ #define SECCOMP_ADDFD_FLAG_SETFD (1UL << 0) /* Specify remote fd */ #define SECCOMP_ADDFD_FLAG_SEND (1UL << 1) /* Addfd and return it, atomically */ @@ -150,4 +152,6 @@ struct seccomp_notif_addfd { #define SECCOMP_IOCTL_NOTIF_ADDFD SECCOMP_IOW(3, \ struct seccomp_notif_addfd) +#define SECCOMP_IOCTL_NOTIF_SET_FLAGS SECCOMP_IOW(4, __u64) + #endif /* _UAPI_LINUX_SECCOMP_H */ diff --git a/include/uapi/linux/sed-opal.h b/include/uapi/linux/sed-opal.h index d7a1524023db..d3994b7716bc 100644 --- a/include/uapi/linux/sed-opal.h +++ b/include/uapi/linux/sed-opal.h @@ -49,13 +49,23 @@ enum opal_lock_flags { OPAL_SAVE_FOR_LOCK = 0x01, }; +enum opal_key_type { + OPAL_INCLUDED = 0, /* key[] is the key */ + OPAL_KEYRING, /* key is in keyring */ +}; + struct opal_key { __u8 lr; __u8 key_len; - __u8 __align[6]; + __u8 key_type; + __u8 __align[5]; __u8 key[OPAL_KEY_MAX]; }; +enum opal_revert_lsp_opts { + OPAL_PRESERVE = 0x01, +}; + struct opal_lr_act { struct opal_key key; __u32 sum; @@ -78,6 +88,16 @@ struct opal_user_lr_setup { struct opal_session_info session; }; +struct opal_lr_status { + struct opal_session_info session; + __u64 range_start; + __u64 range_length; + __u32 RLE; /* Read Lock enabled */ + __u32 WLE; /* Write Lock Enabled */ + __u32 l_state; + __u8 align[4]; +}; + struct opal_lock_unlock { struct opal_session_info session; __u32 l_state; @@ -151,6 +171,29 @@ struct opal_status { __u32 reserved; }; +/* + * Geometry Reporting per TCG Storage OPAL SSC + * section 3.1.1.4 + */ +struct opal_geometry { + __u8 align; + __u32 logical_block_size; + __u64 alignment_granularity; + __u64 lowest_aligned_lba; + __u8 __align[3]; +}; + +struct opal_discovery { + __u64 data; + __u64 size; +}; + +struct opal_revert_lsp { + struct opal_key key; + __u32 options; + __u32 __pad; +}; + #define IOC_OPAL_SAVE _IOW('p', 220, struct opal_lock_unlock) #define IOC_OPAL_LOCK_UNLOCK _IOW('p', 221, struct opal_lock_unlock) #define IOC_OPAL_TAKE_OWNERSHIP _IOW('p', 222, struct opal_key) @@ -168,5 +211,9 @@ struct opal_status { #define IOC_OPAL_WRITE_SHADOW_MBR _IOW('p', 234, struct opal_shadow_mbr) #define IOC_OPAL_GENERIC_TABLE_RW _IOW('p', 235, struct opal_read_write_table) #define IOC_OPAL_GET_STATUS _IOR('p', 236, struct opal_status) +#define IOC_OPAL_GET_LR_STATUS _IOW('p', 237, struct opal_lr_status) +#define IOC_OPAL_GET_GEOMETRY _IOR('p', 238, struct opal_geometry) +#define IOC_OPAL_DISCOVERY _IOW('p', 239, struct opal_discovery) +#define IOC_OPAL_REVERT_LSP _IOW('p', 240, struct opal_revert_lsp) #endif /* _UAPI_SED_OPAL_H */ diff --git a/include/uapi/linux/serial_core.h b/include/uapi/linux/serial_core.h index 281fa286555c..add349889d0a 100644 --- a/include/uapi/linux/serial_core.h +++ b/include/uapi/linux/serial_core.h @@ -25,6 +25,8 @@ /* * The type definitions. These are from Ted Ts'o's serial.h + * By historical reasons the values from 0 to 13 are defined + * in the include/uapi/linux/serial.h, do not define them here. */ #define PORT_NS16550A 14 #define PORT_XSCALE 15 @@ -94,15 +96,9 @@ #define PORT_SCIF 53 #define PORT_IRDA 54 -/* Samsung S3C2410 SoC and derivatives thereof */ -#define PORT_S3C2410 55 - /* SGI IP22 aka Indy / Challenge S / Indigo 2 */ #define PORT_IP22ZILOG 56 -/* Sharp LH7a40x -- an ARM9 SoC series */ -#define PORT_LH7A40X 57 - /* PPC CPM type number */ #define PORT_CPM 58 @@ -112,37 +108,23 @@ /* IBM icom */ #define PORT_ICOM 60 -/* Samsung S3C2440 SoC */ -#define PORT_S3C2440 61 - /* Motorola i.MX SoC */ #define PORT_IMX 62 -/* Marvell MPSC (obsolete unused) */ -#define PORT_MPSC 63 - /* TXX9 type number */ #define PORT_TXX9 64 -/* Samsung S3C2400 SoC */ -#define PORT_S3C2400 67 - -/* M32R SIO */ -#define PORT_M32R_SIO 68 - /*Digi jsm */ #define PORT_JSM 69 /* SUN4V Hypervisor Console */ #define PORT_SUNHV 72 -#define PORT_S3C2412 73 - /* Xilinx uartlite */ #define PORT_UARTLITE 74 -/* Blackfin bf5xx */ -#define PORT_BFIN 75 +/* Broadcom BCM7271 UART */ +#define PORT_BCM7271 76 /* Broadcom SB1250, etc. SOC */ #define PORT_SB1250_DUART 77 @@ -150,13 +132,6 @@ /* Freescale ColdFire */ #define PORT_MCF 78 -/* Blackfin SPORT */ -#define PORT_BFIN_SPORT 79 - -/* MN10300 on-chip UART numbers */ -#define PORT_MN10300 80 -#define PORT_MN10300_CTS 81 - #define PORT_SC26XX 82 /* SH-SCI */ @@ -164,9 +139,6 @@ #define PORT_S3C6400 84 -/* NWPSERIAL, now removed */ -#define PORT_NWPSERIAL 85 - /* MAX3100 */ #define PORT_MAX3100 86 @@ -225,13 +197,10 @@ /* ST ASC type numbers */ #define PORT_ASC 105 -/* Tilera TILE-Gx UART */ -#define PORT_TILEGX 106 - /* MEN 16z135 UART */ #define PORT_MEN_Z135 107 -/* SC16IS74xx */ +/* SC16IS7xx */ #define PORT_SC16IS7XX 108 /* MESON */ @@ -243,9 +212,6 @@ /* SPRD SERIAL */ #define PORT_SPRD 111 -/* Cris v10 / v32 SoC */ -#define PORT_CRIS 112 - /* STM32 USART */ #define PORT_STM32 113 diff --git a/include/uapi/linux/smc.h b/include/uapi/linux/smc.h index bb4dacca31e7..837fcd4b0abc 100644 --- a/include/uapi/linux/smc.h +++ b/include/uapi/linux/smc.h @@ -107,6 +107,8 @@ enum { enum { SMC_NLA_LGR_R_V2_UNSPEC, SMC_NLA_LGR_R_V2_DIRECT, /* u8 */ + SMC_NLA_LGR_R_V2_MAX_CONNS, /* u8 */ + SMC_NLA_LGR_R_V2_MAX_LINKS, /* u8 */ __SMC_NLA_LGR_R_V2_MAX, SMC_NLA_LGR_R_V2_MAX = __SMC_NLA_LGR_R_V2_MAX - 1 }; diff --git a/include/uapi/linux/spi/spi.h b/include/uapi/linux/spi/spi.h index 9d5f58059703..ca56e477d161 100644 --- a/include/uapi/linux/spi/spi.h +++ b/include/uapi/linux/spi/spi.h @@ -28,6 +28,7 @@ #define SPI_RX_OCTAL _BITUL(14) /* receive with 8 wires */ #define SPI_3WIRE_HIZ _BITUL(15) /* high impedance turnaround */ #define SPI_RX_CPHA_FLIP _BITUL(16) /* flip CPHA on Rx only xfer */ +#define SPI_MOSI_IDLE_LOW _BITUL(17) /* leave mosi line low when idle */ /* * All the bits defined above should be covered by SPI_MODE_USER_MASK. @@ -37,6 +38,6 @@ * These bits must not overlap. A static assert check should make sure of that. * If adding extra bits, make sure to increase the bit index below as well. */ -#define SPI_MODE_USER_MASK (_BITUL(17) - 1) +#define SPI_MODE_USER_MASK (_BITUL(18) - 1) #endif /* _UAPI_SPI_H */ diff --git a/include/uapi/linux/stddef.h b/include/uapi/linux/stddef.h index 7837ba4fe728..7c3fc3980881 100644 --- a/include/uapi/linux/stddef.h +++ b/include/uapi/linux/stddef.h @@ -45,3 +45,7 @@ TYPE NAME[]; \ } #endif + +#ifndef __counted_by +#define __counted_by(m) +#endif diff --git a/include/uapi/linux/sync_file.h b/include/uapi/linux/sync_file.h index ee2dcfb3d660..ff0a931833e2 100644 --- a/include/uapi/linux/sync_file.h +++ b/include/uapi/linux/sync_file.h @@ -16,12 +16,16 @@ #include <linux/types.h> /** - * struct sync_merge_data - data passed to merge ioctl + * struct sync_merge_data - SYNC_IOC_MERGE: merge two fences * @name: name of new fence * @fd2: file descriptor of second fence * @fence: returns the fd of the new fence to userspace * @flags: merge_data flags * @pad: padding for 64-bit alignment, should always be zero + * + * Creates a new fence containing copies of the sync_pts in both + * the calling fd and sync_merge_data.fd2. Returns the new fence's + * fd in sync_merge_data.fence */ struct sync_merge_data { char name[32]; @@ -34,8 +38,8 @@ struct sync_merge_data { /** * struct sync_fence_info - detailed fence information * @obj_name: name of parent sync_timeline -* @driver_name: name of driver implementing the parent -* @status: status of the fence 0:active 1:signaled <0:error + * @driver_name: name of driver implementing the parent + * @status: status of the fence 0:active 1:signaled <0:error * @flags: fence_info flags * @timestamp_ns: timestamp of status change in nanoseconds */ @@ -48,14 +52,19 @@ struct sync_fence_info { }; /** - * struct sync_file_info - data returned from fence info ioctl + * struct sync_file_info - SYNC_IOC_FILE_INFO: get detailed information on a sync_file * @name: name of fence * @status: status of fence. 1: signaled 0:active <0:error * @flags: sync_file_info flags - * @num_fences number of fences in the sync_file + * @num_fences: number of fences in the sync_file * @pad: padding for 64-bit alignment, should always be zero - * @sync_fence_info: pointer to array of structs sync_fence_info with all + * @sync_fence_info: pointer to array of struct &sync_fence_info with all * fences in the sync_file + * + * Takes a struct sync_file_info. If num_fences is 0, the field is updated + * with the actual number of fences. If num_fences is > 0, the system will + * use the pointer provided on sync_fence_info to return up to num_fences of + * struct sync_fence_info, with detailed fence information. */ struct sync_file_info { char name[32]; @@ -69,30 +78,14 @@ struct sync_file_info { #define SYNC_IOC_MAGIC '>' -/** +/* * Opcodes 0, 1 and 2 were burned during a API change to avoid users of the * old API to get weird errors when trying to handling sync_files. The API * change happened during the de-stage of the Sync Framework when there was * no upstream users available. */ -/** - * DOC: SYNC_IOC_MERGE - merge two fences - * - * Takes a struct sync_merge_data. Creates a new fence containing copies of - * the sync_pts in both the calling fd and sync_merge_data.fd2. Returns the - * new fence's fd in sync_merge_data.fence - */ #define SYNC_IOC_MERGE _IOWR(SYNC_IOC_MAGIC, 3, struct sync_merge_data) - -/** - * DOC: SYNC_IOC_FILE_INFO - get detailed information on a sync_file - * - * Takes a struct sync_file_info. If num_fences is 0, the field is updated - * with the actual number of fences. If num_fences is > 0, the system will - * use the pointer provided on sync_fence_info to return up to num_fences of - * struct sync_fence_info, with detailed fence information. - */ #define SYNC_IOC_FILE_INFO _IOWR(SYNC_IOC_MAGIC, 4, struct sync_file_info) #endif /* _UAPI_LINUX_SYNC_H */ diff --git a/include/uapi/linux/target_core_user.h b/include/uapi/linux/target_core_user.h index fbd8ca67e107..f925a77f19ed 100644 --- a/include/uapi/linux/target_core_user.h +++ b/include/uapi/linux/target_core_user.h @@ -119,7 +119,7 @@ struct tcmu_cmd_entry { __u64 cdb_off; __u64 __pad1; __u64 __pad2; - struct iovec iov[0]; + __DECLARE_FLEX_ARRAY(struct iovec, iov); } req; struct { __u8 scsi_status; diff --git a/include/uapi/linux/taskstats.h b/include/uapi/linux/taskstats.h index a7f5b11a8f1b..b50b2eb257a0 100644 --- a/include/uapi/linux/taskstats.h +++ b/include/uapi/linux/taskstats.h @@ -34,7 +34,7 @@ */ -#define TASKSTATS_VERSION 13 +#define TASKSTATS_VERSION 14 #define TS_COMM_LEN 32 /* should be >= TASK_COMM_LEN * in linux/sched.h */ @@ -198,6 +198,10 @@ struct taskstats { /* v13: Delay waiting for write-protect copy */ __u64 wpcopy_count; __u64 wpcopy_delay_total; + + /* v14: Delay waiting for IRQ/SOFTIRQ */ + __u64 irq_count; + __u64 irq_delay_total; }; diff --git a/include/uapi/linux/tc_act/tc_tunnel_key.h b/include/uapi/linux/tc_act/tc_tunnel_key.h index 49ad4033951b..37c6f612f161 100644 --- a/include/uapi/linux/tc_act/tc_tunnel_key.h +++ b/include/uapi/linux/tc_act/tc_tunnel_key.h @@ -34,6 +34,7 @@ enum { */ TCA_TUNNEL_KEY_ENC_TOS, /* u8 */ TCA_TUNNEL_KEY_ENC_TTL, /* u8 */ + TCA_TUNNEL_KEY_NO_FRAG, /* flag */ __TCA_TUNNEL_KEY_MAX, }; diff --git a/include/uapi/linux/tps6594_pfsm.h b/include/uapi/linux/tps6594_pfsm.h new file mode 100644 index 000000000000..c69569e0a7a2 --- /dev/null +++ b/include/uapi/linux/tps6594_pfsm.h @@ -0,0 +1,37 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +/* + * Userspace ABI for TPS6594 PMIC Pre-configurable Finite State Machine + * + * Copyright (C) 2023 BayLibre Incorporated - https://www.baylibre.com/ + */ + +#ifndef __TPS6594_PFSM_H +#define __TPS6594_PFSM_H + +#include <linux/const.h> +#include <linux/ioctl.h> +#include <linux/types.h> + +/** + * struct pmic_state_opt - PMIC state options + * @gpio_retention: if enabled, power rails associated with GPIO retention remain active + * @ddr_retention: if enabled, power rails associated with DDR retention remain active + * @mcu_only_startup_dest: if enabled, startup destination state is MCU_ONLY + */ +struct pmic_state_opt { + __u8 gpio_retention; + __u8 ddr_retention; + __u8 mcu_only_startup_dest; +}; + +/* Commands */ +#define PMIC_BASE 'P' + +#define PMIC_GOTO_STANDBY _IO(PMIC_BASE, 0) +#define PMIC_GOTO_LP_STANDBY _IO(PMIC_BASE, 1) +#define PMIC_UPDATE_PGM _IO(PMIC_BASE, 2) +#define PMIC_SET_ACTIVE_STATE _IO(PMIC_BASE, 3) +#define PMIC_SET_MCU_ONLY_STATE _IOW(PMIC_BASE, 4, struct pmic_state_opt) +#define PMIC_SET_RETENTION_STATE _IOW(PMIC_BASE, 5, struct pmic_state_opt) + +#endif /* __TPS6594_PFSM_H */ diff --git a/include/uapi/linux/types.h b/include/uapi/linux/types.h index 308433be33c2..6375a0684052 100644 --- a/include/uapi/linux/types.h +++ b/include/uapi/linux/types.h @@ -13,6 +13,10 @@ #include <linux/posix_types.h> +#ifdef __SIZEOF_INT128__ +typedef __signed__ __int128 __s128 __attribute__((aligned(16))); +typedef unsigned __int128 __u128 __attribute__((aligned(16))); +#endif /* * Below are truly Linux-specific types that should never collide with diff --git a/include/uapi/linux/ublk_cmd.h b/include/uapi/linux/ublk_cmd.h index f6238ccc7800..b9cfc5c96268 100644 --- a/include/uapi/linux/ublk_cmd.h +++ b/include/uapi/linux/ublk_cmd.h @@ -8,6 +8,9 @@ /* * Admin commands, issued by ublk server, and handled by ublk driver. + * + * Legacy command definition, don't use in new application, and don't + * add new such definition any more */ #define UBLK_CMD_GET_QUEUE_AFFINITY 0x01 #define UBLK_CMD_GET_DEV_INFO 0x02 @@ -21,6 +24,38 @@ #define UBLK_CMD_END_USER_RECOVERY 0x11 #define UBLK_CMD_GET_DEV_INFO2 0x12 +/* Any new ctrl command should encode by __IO*() */ +#define UBLK_U_CMD_GET_QUEUE_AFFINITY \ + _IOR('u', UBLK_CMD_GET_QUEUE_AFFINITY, struct ublksrv_ctrl_cmd) +#define UBLK_U_CMD_GET_DEV_INFO \ + _IOR('u', UBLK_CMD_GET_DEV_INFO, struct ublksrv_ctrl_cmd) +#define UBLK_U_CMD_ADD_DEV \ + _IOWR('u', UBLK_CMD_ADD_DEV, struct ublksrv_ctrl_cmd) +#define UBLK_U_CMD_DEL_DEV \ + _IOWR('u', UBLK_CMD_DEL_DEV, struct ublksrv_ctrl_cmd) +#define UBLK_U_CMD_START_DEV \ + _IOWR('u', UBLK_CMD_START_DEV, struct ublksrv_ctrl_cmd) +#define UBLK_U_CMD_STOP_DEV \ + _IOWR('u', UBLK_CMD_STOP_DEV, struct ublksrv_ctrl_cmd) +#define UBLK_U_CMD_SET_PARAMS \ + _IOWR('u', UBLK_CMD_SET_PARAMS, struct ublksrv_ctrl_cmd) +#define UBLK_U_CMD_GET_PARAMS \ + _IOR('u', UBLK_CMD_GET_PARAMS, struct ublksrv_ctrl_cmd) +#define UBLK_U_CMD_START_USER_RECOVERY \ + _IOWR('u', UBLK_CMD_START_USER_RECOVERY, struct ublksrv_ctrl_cmd) +#define UBLK_U_CMD_END_USER_RECOVERY \ + _IOWR('u', UBLK_CMD_END_USER_RECOVERY, struct ublksrv_ctrl_cmd) +#define UBLK_U_CMD_GET_DEV_INFO2 \ + _IOR('u', UBLK_CMD_GET_DEV_INFO2, struct ublksrv_ctrl_cmd) +#define UBLK_U_CMD_GET_FEATURES \ + _IOR('u', 0x13, struct ublksrv_ctrl_cmd) + +/* + * 64bits are enough now, and it should be easy to extend in case of + * running out of feature flags + */ +#define UBLK_FEATURES_LEN 8 + /* * IO commands, issued by ublk server, and handled by ublk driver. * @@ -41,10 +76,23 @@ * It is only used if ublksrv set UBLK_F_NEED_GET_DATA flag * while starting a ublk device. */ + +/* + * Legacy IO command definition, don't use in new application, and don't + * add new such definition any more + */ #define UBLK_IO_FETCH_REQ 0x20 #define UBLK_IO_COMMIT_AND_FETCH_REQ 0x21 #define UBLK_IO_NEED_GET_DATA 0x22 +/* Any new IO command should encode by __IOWR() */ +#define UBLK_U_IO_FETCH_REQ \ + _IOWR('u', UBLK_IO_FETCH_REQ, struct ublksrv_io_cmd) +#define UBLK_U_IO_COMMIT_AND_FETCH_REQ \ + _IOWR('u', UBLK_IO_COMMIT_AND_FETCH_REQ, struct ublksrv_io_cmd) +#define UBLK_U_IO_NEED_GET_DATA \ + _IOWR('u', UBLK_IO_NEED_GET_DATA, struct ublksrv_io_cmd) + /* only ABORT means that no re-fetch */ #define UBLK_IO_RES_OK 0 #define UBLK_IO_RES_NEED_GET_DATA 1 @@ -53,9 +101,29 @@ #define UBLKSRV_CMD_BUF_OFFSET 0 #define UBLKSRV_IO_BUF_OFFSET 0x80000000 -/* tag bit is 12bit, so at most 4096 IOs for each queue */ +/* tag bit is 16bit, so far limit at most 4096 IOs for each queue */ #define UBLK_MAX_QUEUE_DEPTH 4096 +/* single IO buffer max size is 32MB */ +#define UBLK_IO_BUF_OFF 0 +#define UBLK_IO_BUF_BITS 25 +#define UBLK_IO_BUF_BITS_MASK ((1ULL << UBLK_IO_BUF_BITS) - 1) + +/* so at most 64K IOs for each queue */ +#define UBLK_TAG_OFF UBLK_IO_BUF_BITS +#define UBLK_TAG_BITS 16 +#define UBLK_TAG_BITS_MASK ((1ULL << UBLK_TAG_BITS) - 1) + +/* max 4096 queues */ +#define UBLK_QID_OFF (UBLK_TAG_OFF + UBLK_TAG_BITS) +#define UBLK_QID_BITS 12 +#define UBLK_QID_BITS_MASK ((1ULL << UBLK_QID_BITS) - 1) + +#define UBLK_MAX_NR_QUEUES (1U << UBLK_QID_BITS) + +#define UBLKSRV_IO_BUF_TOTAL_BITS (UBLK_QID_OFF + UBLK_QID_BITS) +#define UBLKSRV_IO_BUF_TOTAL_SIZE (1ULL << UBLKSRV_IO_BUF_TOTAL_BITS) + /* * zero copy requires 4k block size, and can remap ublk driver's io * request into ublksrv's vm space @@ -102,6 +170,18 @@ */ #define UBLK_F_UNPRIVILEGED_DEV (1UL << 5) +/* use ioctl encoding for uring command */ +#define UBLK_F_CMD_IOCTL_ENCODE (1UL << 6) + +/* Copy between request and user buffer by pread()/pwrite() */ +#define UBLK_F_USER_COPY (1UL << 7) + +/* + * User space sets this flag when setting up the device to request zoned storage support. Kernel may + * deny the request by returning an error. + */ +#define UBLK_F_ZONED (1ULL << 8) + /* device state */ #define UBLK_S_DEV_DEAD 0 #define UBLK_S_DEV_LIVE 1 @@ -158,9 +238,27 @@ struct ublksrv_ctrl_dev_info { #define UBLK_IO_OP_READ 0 #define UBLK_IO_OP_WRITE 1 #define UBLK_IO_OP_FLUSH 2 -#define UBLK_IO_OP_DISCARD 3 -#define UBLK_IO_OP_WRITE_SAME 4 -#define UBLK_IO_OP_WRITE_ZEROES 5 +#define UBLK_IO_OP_DISCARD 3 +#define UBLK_IO_OP_WRITE_SAME 4 +#define UBLK_IO_OP_WRITE_ZEROES 5 +#define UBLK_IO_OP_ZONE_OPEN 10 +#define UBLK_IO_OP_ZONE_CLOSE 11 +#define UBLK_IO_OP_ZONE_FINISH 12 +#define UBLK_IO_OP_ZONE_APPEND 13 +#define UBLK_IO_OP_ZONE_RESET_ALL 14 +#define UBLK_IO_OP_ZONE_RESET 15 +/* + * Construct a zone report. The report request is carried in `struct + * ublksrv_io_desc`. The `start_sector` field must be the first sector of a zone + * and shall indicate the first zone of the report. The `nr_zones` shall + * indicate how many zones should be reported at most. The report shall be + * delivered as a `struct blk_zone` array. To report fewer zones than requested, + * zero the last entry of the returned array. + * + * Related definitions(blk_zone, blk_zone_cond, blk_zone_type, ...) in + * include/uapi/linux/blkzoned.h are part of ublk UAPI. + */ +#define UBLK_IO_OP_REPORT_ZONES 18 #define UBLK_IO_F_FAILFAST_DEV (1U << 8) #define UBLK_IO_F_FAILFAST_TRANSPORT (1U << 9) @@ -181,7 +279,10 @@ struct ublksrv_io_desc { /* op: bit 0-7, flags: bit 8-31 */ __u32 op_flags; - __u32 nr_sectors; + union { + __u32 nr_sectors; + __u32 nr_zones; /* for UBLK_IO_OP_REPORT_ZONES */ + }; /* start sector for this io */ __u64 start_sector; @@ -210,11 +311,21 @@ struct ublksrv_io_cmd { /* io result, it is valid for COMMIT* command only */ __s32 result; - /* - * userspace buffer address in ublksrv daemon process, valid for - * FETCH* command only - */ - __u64 addr; + union { + /* + * userspace buffer address in ublksrv daemon process, valid for + * FETCH* command only + * + * `addr` should not be used when UBLK_F_USER_COPY is enabled, + * because userspace handles data copy by pread()/pwrite() over + * /dev/ublkcN. But in case of UBLK_F_ZONED, this union is + * re-used to pass back the allocated LBA for + * UBLK_IO_OP_ZONE_APPEND which actually depends on + * UBLK_F_USER_COPY + */ + __u64 addr; + __u64 zone_append_lba; + }; }; struct ublk_param_basic { @@ -257,6 +368,13 @@ struct ublk_param_devt { __u32 disk_minor; }; +struct ublk_param_zoned { + __u32 max_open_zones; + __u32 max_active_zones; + __u32 max_zone_append_sectors; + __u8 reserved[20]; +}; + struct ublk_params { /* * Total length of parameters, userspace has to set 'len' for both @@ -268,11 +386,13 @@ struct ublk_params { #define UBLK_PARAM_TYPE_BASIC (1 << 0) #define UBLK_PARAM_TYPE_DISCARD (1 << 1) #define UBLK_PARAM_TYPE_DEVT (1 << 2) +#define UBLK_PARAM_TYPE_ZONED (1 << 3) __u32 types; /* types of parameter included */ struct ublk_param_basic basic; struct ublk_param_discard discard; struct ublk_param_devt devt; + struct ublk_param_zoned zoned; }; #endif diff --git a/include/uapi/linux/usb/ch11.h b/include/uapi/linux/usb/ch11.h index fb0cd24c392c..ce4c83f2e66a 100644 --- a/include/uapi/linux/usb/ch11.h +++ b/include/uapi/linux/usb/ch11.h @@ -15,10 +15,8 @@ /* This is arbitrary. * From USB 2.0 spec Table 11-13, offset 7, a hub can * have up to 255 ports. The most yet reported is 10. - * - * Current Wireless USB host hardware (Intel i1480 for example) allows - * up to 22 devices to connect. Upcoming hardware might raise that - * limit. Because the arrays need to add a bit for hub status data, we + * Upcoming hardware might raise that limit. + * Because the arrays need to add a bit for hub status data, we * use 31, so plus one evens out to four bytes. */ #define USB_MAXCHILDREN 31 diff --git a/include/uapi/linux/usb/ch9.h b/include/uapi/linux/usb/ch9.h index b17e3a21b15f..8a147abfc680 100644 --- a/include/uapi/linux/usb/ch9.h +++ b/include/uapi/linux/usb/ch9.h @@ -3,7 +3,7 @@ * This file holds USB constants and structures that are needed for * USB device APIs. These are used by the USB device model, which is * defined in chapter 9 of the USB 2.0 specification and in the - * Wireless USB 1.0 (spread around). Linux has several APIs in C that + * Wireless USB 1.0 spec (now defunct). Linux has several APIs in C that * need these: * * - the master/host side Linux-USB kernel driver API; @@ -14,9 +14,6 @@ * act either as a USB master/host or as a USB slave/device. That means * the master and slave side APIs benefit from working well together. * - * There's also "Wireless USB", using low power short range radios for - * peripheral interconnection but otherwise building on the USB framework. - * * Note all descriptors are declared '__attribute__((packed))' so that: * * [a] they never get padded, either internally (USB spec writers @@ -376,7 +373,10 @@ struct usb_string_descriptor { __u8 bLength; __u8 bDescriptorType; - __le16 wData[1]; /* UTF-16LE encoded */ + union { + __le16 legacy_padding; + __DECLARE_FLEX_ARRAY(__le16, wData); /* UTF-16LE encoded */ + }; } __attribute__ ((packed)); /* note that "string" zero is special, it holds language codes that @@ -981,7 +981,11 @@ struct usb_ssp_cap_descriptor { #define USB_SSP_MIN_RX_LANE_COUNT (0xf << 8) #define USB_SSP_MIN_TX_LANE_COUNT (0xf << 12) __le16 wReserved; - __le32 bmSublinkSpeedAttr[1]; /* list of sublink speed attrib entries */ + union { + __le32 legacy_padding; + /* list of sublink speed attrib entries */ + __DECLARE_FLEX_ARRAY(__le32, bmSublinkSpeedAttr); + }; #define USB_SSP_SUBLINK_SPEED_SSID (0xf) /* sublink speed ID */ #define USB_SSP_SUBLINK_SPEED_LSE (0x3 << 4) /* Lanespeed exponent */ #define USB_SSP_SUBLINK_SPEED_LSE_BPS 0 diff --git a/include/uapi/linux/user_events.h b/include/uapi/linux/user_events.h new file mode 100644 index 000000000000..2984aae4a2b4 --- /dev/null +++ b/include/uapi/linux/user_events.h @@ -0,0 +1,81 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +/* + * Copyright (c) 2021-2022, Microsoft Corporation. + * + * Authors: + * Beau Belgrave <beaub@linux.microsoft.com> + */ +#ifndef _UAPI_LINUX_USER_EVENTS_H +#define _UAPI_LINUX_USER_EVENTS_H + +#include <linux/types.h> +#include <linux/ioctl.h> + +#define USER_EVENTS_SYSTEM "user_events" +#define USER_EVENTS_PREFIX "u:" + +/* Create dynamic location entry within a 32-bit value */ +#define DYN_LOC(offset, size) ((size) << 16 | (offset)) + +/* + * Describes an event registration and stores the results of the registration. + * This structure is passed to the DIAG_IOCSREG ioctl, callers at a minimum + * must set the size and name_args before invocation. + */ +struct user_reg { + + /* Input: Size of the user_reg structure being used */ + __u32 size; + + /* Input: Bit in enable address to use */ + __u8 enable_bit; + + /* Input: Enable size in bytes at address */ + __u8 enable_size; + + /* Input: Flags for future use, set to 0 */ + __u16 flags; + + /* Input: Address to update when enabled */ + __u64 enable_addr; + + /* Input: Pointer to string with event name, description and flags */ + __u64 name_args; + + /* Output: Index of the event to use when writing data */ + __u32 write_index; +} __attribute__((__packed__)); + +/* + * Describes an event unregister, callers must set the size, address and bit. + * This structure is passed to the DIAG_IOCSUNREG ioctl to disable bit updates. + */ +struct user_unreg { + /* Input: Size of the user_unreg structure being used */ + __u32 size; + + /* Input: Bit to unregister */ + __u8 disable_bit; + + /* Input: Reserved, set to 0 */ + __u8 __reserved; + + /* Input: Reserved, set to 0 */ + __u16 __reserved2; + + /* Input: Address to unregister */ + __u64 disable_addr; +} __attribute__((__packed__)); + +#define DIAG_IOC_MAGIC '*' + +/* Request to register a user_event */ +#define DIAG_IOCSREG _IOWR(DIAG_IOC_MAGIC, 0, struct user_reg *) + +/* Request to delete a user_event */ +#define DIAG_IOCSDEL _IOW(DIAG_IOC_MAGIC, 1, char *) + +/* Requests to unregister a user_event */ +#define DIAG_IOCSUNREG _IOW(DIAG_IOC_MAGIC, 2, struct user_unreg*) + +#endif /* _UAPI_LINUX_USER_EVENTS_H */ diff --git a/include/uapi/linux/userfaultfd.h b/include/uapi/linux/userfaultfd.h index 005e5e306266..62151706c5a3 100644 --- a/include/uapi/linux/userfaultfd.h +++ b/include/uapi/linux/userfaultfd.h @@ -38,7 +38,9 @@ UFFD_FEATURE_MINOR_HUGETLBFS | \ UFFD_FEATURE_MINOR_SHMEM | \ UFFD_FEATURE_EXACT_ADDRESS | \ - UFFD_FEATURE_WP_HUGETLBFS_SHMEM) + UFFD_FEATURE_WP_HUGETLBFS_SHMEM | \ + UFFD_FEATURE_WP_UNPOPULATED | \ + UFFD_FEATURE_POISON) #define UFFD_API_IOCTLS \ ((__u64)1 << _UFFDIO_REGISTER | \ (__u64)1 << _UFFDIO_UNREGISTER | \ @@ -48,12 +50,14 @@ (__u64)1 << _UFFDIO_COPY | \ (__u64)1 << _UFFDIO_ZEROPAGE | \ (__u64)1 << _UFFDIO_WRITEPROTECT | \ - (__u64)1 << _UFFDIO_CONTINUE) + (__u64)1 << _UFFDIO_CONTINUE | \ + (__u64)1 << _UFFDIO_POISON) #define UFFD_API_RANGE_IOCTLS_BASIC \ ((__u64)1 << _UFFDIO_WAKE | \ (__u64)1 << _UFFDIO_COPY | \ + (__u64)1 << _UFFDIO_WRITEPROTECT | \ (__u64)1 << _UFFDIO_CONTINUE | \ - (__u64)1 << _UFFDIO_WRITEPROTECT) + (__u64)1 << _UFFDIO_POISON) /* * Valid ioctl command number range with this API is from 0x00 to @@ -70,6 +74,7 @@ #define _UFFDIO_ZEROPAGE (0x04) #define _UFFDIO_WRITEPROTECT (0x06) #define _UFFDIO_CONTINUE (0x07) +#define _UFFDIO_POISON (0x08) #define _UFFDIO_API (0x3F) /* userfaultfd ioctl ids */ @@ -90,6 +95,8 @@ struct uffdio_writeprotect) #define UFFDIO_CONTINUE _IOWR(UFFDIO, _UFFDIO_CONTINUE, \ struct uffdio_continue) +#define UFFDIO_POISON _IOWR(UFFDIO, _UFFDIO_POISON, \ + struct uffdio_poison) /* read() structure */ struct uffd_msg { @@ -203,6 +210,12 @@ struct uffdio_api { * * UFFD_FEATURE_WP_HUGETLBFS_SHMEM indicates that userfaultfd * write-protection mode is supported on both shmem and hugetlbfs. + * + * UFFD_FEATURE_WP_UNPOPULATED indicates that userfaultfd + * write-protection mode will always apply to unpopulated pages + * (i.e. empty ptes). This will be the default behavior for shmem + * & hugetlbfs, so this flag only affects anonymous memory behavior + * when userfault write-protection mode is registered. */ #define UFFD_FEATURE_PAGEFAULT_FLAG_WP (1<<0) #define UFFD_FEATURE_EVENT_FORK (1<<1) @@ -217,6 +230,8 @@ struct uffdio_api { #define UFFD_FEATURE_MINOR_SHMEM (1<<10) #define UFFD_FEATURE_EXACT_ADDRESS (1<<11) #define UFFD_FEATURE_WP_HUGETLBFS_SHMEM (1<<12) +#define UFFD_FEATURE_WP_UNPOPULATED (1<<13) +#define UFFD_FEATURE_POISON (1<<14) __u64 features; __u64 ioctls; @@ -297,6 +312,13 @@ struct uffdio_writeprotect { struct uffdio_continue { struct uffdio_range range; #define UFFDIO_CONTINUE_MODE_DONTWAKE ((__u64)1<<0) + /* + * UFFDIO_CONTINUE_MODE_WP will map the page write protected on + * the fly. UFFDIO_CONTINUE_MODE_WP is available only if the + * write protected ioctl is implemented for the range + * according to the uffdio_register.ioctls. + */ +#define UFFDIO_CONTINUE_MODE_WP ((__u64)1<<1) __u64 mode; /* @@ -306,6 +328,18 @@ struct uffdio_continue { __s64 mapped; }; +struct uffdio_poison { + struct uffdio_range range; +#define UFFDIO_POISON_MODE_DONTWAKE ((__u64)1<<0) + __u64 mode; + + /* + * Fields below here are written by the ioctl and must be at the end: + * the copy_from_user will not read past here. + */ + __s64 updated; +}; + /* * Flags for the userfaultfd(2) system call itself. */ diff --git a/include/uapi/linux/uuid.h b/include/uapi/linux/uuid.h index 96ac684a4b2f..8443738f4bb2 100644 --- a/include/uapi/linux/uuid.h +++ b/include/uapi/linux/uuid.h @@ -1,30 +1 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -/* DO NOT USE in new code! This is solely for MEI due to legacy reasons */ -/* - * MEI UUID definition - * - * Copyright (C) 2010, Intel Corp. - * Huang Ying <ying.huang@intel.com> - */ - -#ifndef _UAPI_LINUX_UUID_H_ -#define _UAPI_LINUX_UUID_H_ - -#include <linux/types.h> - -typedef struct { - __u8 b[16]; -} uuid_le; - -#define UUID_LE(a, b, c, d0, d1, d2, d3, d4, d5, d6, d7) \ -((uuid_le) \ -{{ (a) & 0xff, ((a) >> 8) & 0xff, ((a) >> 16) & 0xff, ((a) >> 24) & 0xff, \ - (b) & 0xff, ((b) >> 8) & 0xff, \ - (c) & 0xff, ((c) >> 8) & 0xff, \ - (d0), (d1), (d2), (d3), (d4), (d5), (d6), (d7) }}) - -#define NULL_UUID_LE \ - UUID_LE(0x00000000, 0x0000, 0x0000, 0x00, 0x00, 0x00, 0x00, \ - 0x00, 0x00, 0x00, 0x00) - -#endif /* _UAPI_LINUX_UUID_H_ */ +#include <linux/mei_uuid.h> diff --git a/include/uapi/linux/v4l2-controls.h b/include/uapi/linux/v4l2-controls.h index 5e80daa4ffe0..c3604a0a3e30 100644 --- a/include/uapi/linux/v4l2-controls.h +++ b/include/uapi/linux/v4l2-controls.h @@ -804,6 +804,88 @@ enum v4l2_mpeg_video_frame_skip_mode { #define V4L2_CID_MPEG_VIDEO_DEC_DISPLAY_DELAY (V4L2_CID_CODEC_BASE + 653) #define V4L2_CID_MPEG_VIDEO_DEC_DISPLAY_DELAY_ENABLE (V4L2_CID_CODEC_BASE + 654) +#define V4L2_CID_MPEG_VIDEO_AV1_PROFILE (V4L2_CID_CODEC_BASE + 655) +/** + * enum v4l2_mpeg_video_av1_profile - AV1 profiles + * + * @V4L2_MPEG_VIDEO_AV1_PROFILE_MAIN: compliant decoders must be able to decode + * streams with seq_profile equal to 0. + * @V4L2_MPEG_VIDEO_AV1_PROFILE_HIGH: compliant decoders must be able to decode + * streams with seq_profile equal less than or equal to 1. + * @V4L2_MPEG_VIDEO_AV1_PROFILE_PROFESSIONAL: compliant decoders must be able to + * decode streams with seq_profile less than or equal to 2. + * + * Conveys the highest profile a decoder can work with. + */ +enum v4l2_mpeg_video_av1_profile { + V4L2_MPEG_VIDEO_AV1_PROFILE_MAIN = 0, + V4L2_MPEG_VIDEO_AV1_PROFILE_HIGH = 1, + V4L2_MPEG_VIDEO_AV1_PROFILE_PROFESSIONAL = 2, +}; + +#define V4L2_CID_MPEG_VIDEO_AV1_LEVEL (V4L2_CID_CODEC_BASE + 656) +/** + * enum v4l2_mpeg_video_av1_level - AV1 levels + * + * @V4L2_MPEG_VIDEO_AV1_LEVEL_2_0: Level 2.0. + * @V4L2_MPEG_VIDEO_AV1_LEVEL_2_1: Level 2.1. + * @V4L2_MPEG_VIDEO_AV1_LEVEL_2_2: Level 2.2. + * @V4L2_MPEG_VIDEO_AV1_LEVEL_2_3: Level 2.3. + * @V4L2_MPEG_VIDEO_AV1_LEVEL_3_0: Level 3.0. + * @V4L2_MPEG_VIDEO_AV1_LEVEL_3_1: Level 3.1. + * @V4L2_MPEG_VIDEO_AV1_LEVEL_3_2: Level 3.2. + * @V4L2_MPEG_VIDEO_AV1_LEVEL_3_3: Level 3.3. + * @V4L2_MPEG_VIDEO_AV1_LEVEL_4_0: Level 4.0. + * @V4L2_MPEG_VIDEO_AV1_LEVEL_4_1: Level 4.1. + * @V4L2_MPEG_VIDEO_AV1_LEVEL_4_2: Level 4.2. + * @V4L2_MPEG_VIDEO_AV1_LEVEL_4_3: Level 4.3. + * @V4L2_MPEG_VIDEO_AV1_LEVEL_5_0: Level 5.0. + * @V4L2_MPEG_VIDEO_AV1_LEVEL_5_1: Level 5.1. + * @V4L2_MPEG_VIDEO_AV1_LEVEL_5_2: Level 5.2. + * @V4L2_MPEG_VIDEO_AV1_LEVEL_5_3: Level 5.3. + * @V4L2_MPEG_VIDEO_AV1_LEVEL_6_0: Level 6.0. + * @V4L2_MPEG_VIDEO_AV1_LEVEL_6_1: Level 6.1. + * @V4L2_MPEG_VIDEO_AV1_LEVEL_6_2: Level 6.2. + * @V4L2_MPEG_VIDEO_AV1_LEVEL_6_3: Level 6.3. + * @V4L2_MPEG_VIDEO_AV1_LEVEL_7_0: Level 7.0. + * @V4L2_MPEG_VIDEO_AV1_LEVEL_7_1: Level 7.1. + * @V4L2_MPEG_VIDEO_AV1_LEVEL_7_2: Level 7.2. + * @V4L2_MPEG_VIDEO_AV1_LEVEL_7_3: Level 7.3. + * + * Conveys the highest level a decoder can work with. + */ +enum v4l2_mpeg_video_av1_level { + V4L2_MPEG_VIDEO_AV1_LEVEL_2_0 = 0, + V4L2_MPEG_VIDEO_AV1_LEVEL_2_1 = 1, + V4L2_MPEG_VIDEO_AV1_LEVEL_2_2 = 2, + V4L2_MPEG_VIDEO_AV1_LEVEL_2_3 = 3, + + V4L2_MPEG_VIDEO_AV1_LEVEL_3_0 = 4, + V4L2_MPEG_VIDEO_AV1_LEVEL_3_1 = 5, + V4L2_MPEG_VIDEO_AV1_LEVEL_3_2 = 6, + V4L2_MPEG_VIDEO_AV1_LEVEL_3_3 = 7, + + V4L2_MPEG_VIDEO_AV1_LEVEL_4_0 = 8, + V4L2_MPEG_VIDEO_AV1_LEVEL_4_1 = 9, + V4L2_MPEG_VIDEO_AV1_LEVEL_4_2 = 10, + V4L2_MPEG_VIDEO_AV1_LEVEL_4_3 = 11, + + V4L2_MPEG_VIDEO_AV1_LEVEL_5_0 = 12, + V4L2_MPEG_VIDEO_AV1_LEVEL_5_1 = 13, + V4L2_MPEG_VIDEO_AV1_LEVEL_5_2 = 14, + V4L2_MPEG_VIDEO_AV1_LEVEL_5_3 = 15, + + V4L2_MPEG_VIDEO_AV1_LEVEL_6_0 = 16, + V4L2_MPEG_VIDEO_AV1_LEVEL_6_1 = 17, + V4L2_MPEG_VIDEO_AV1_LEVEL_6_2 = 18, + V4L2_MPEG_VIDEO_AV1_LEVEL_6_3 = 19, + + V4L2_MPEG_VIDEO_AV1_LEVEL_7_0 = 20, + V4L2_MPEG_VIDEO_AV1_LEVEL_7_1 = 21, + V4L2_MPEG_VIDEO_AV1_LEVEL_7_2 = 22, + V4L2_MPEG_VIDEO_AV1_LEVEL_7_3 = 23 +}; + /* MPEG-class control IDs specific to the CX2341x driver as defined by V4L2 */ #define V4L2_CID_CODEC_CX2341X_BASE (V4L2_CTRL_CLASS_CODEC | 0x1000) #define V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE (V4L2_CID_CODEC_CX2341X_BASE+0) @@ -2385,6 +2467,9 @@ struct v4l2_ctrl_hevc_slice_params { * @poc_st_curr_after: provides the index of the short term after references * in DPB array * @poc_lt_curr: provides the index of the long term references in DPB array + * @num_delta_pocs_of_ref_rps_idx: same as the derived value NumDeltaPocs[RefRpsIdx], + * can be used to parse the RPS data in slice headers + * instead of skipping it with @short_term_ref_pic_set_size. * @reserved: padding field. Should be zeroed by applications. * @dpb: the decoded picture buffer, for meta-data about reference frames * @flags: see V4L2_HEVC_DECODE_PARAM_FLAG_{} @@ -2400,7 +2485,8 @@ struct v4l2_ctrl_hevc_decode_params { __u8 poc_st_curr_before[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]; __u8 poc_st_curr_after[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]; __u8 poc_lt_curr[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]; - __u8 reserved[4]; + __u8 num_delta_pocs_of_ref_rps_idx; + __u8 reserved[3]; struct v4l2_hevc_dpb_entry dpb[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]; __u64 flags; }; @@ -2754,6 +2840,645 @@ struct v4l2_ctrl_vp9_compressed_hdr { struct v4l2_vp9_mv_probs mv; }; +/* Stateless AV1 controls */ + +#define V4L2_AV1_TOTAL_REFS_PER_FRAME 8 +#define V4L2_AV1_CDEF_MAX 8 +#define V4L2_AV1_NUM_PLANES_MAX 3 /* 1 if monochrome, 3 otherwise */ +#define V4L2_AV1_MAX_SEGMENTS 8 +#define V4L2_AV1_MAX_OPERATING_POINTS (1 << 5) /* 5 bits to encode */ +#define V4L2_AV1_REFS_PER_FRAME 7 +#define V4L2_AV1_MAX_NUM_Y_POINTS (1 << 4) /* 4 bits to encode */ +#define V4L2_AV1_MAX_NUM_CB_POINTS (1 << 4) /* 4 bits to encode */ +#define V4L2_AV1_MAX_NUM_CR_POINTS (1 << 4) /* 4 bits to encode */ +#define V4L2_AV1_AR_COEFFS_SIZE 25 /* (2 * 3 * (3 + 1)) + 1 */ +#define V4L2_AV1_MAX_NUM_PLANES 3 +#define V4L2_AV1_MAX_TILE_COLS 64 +#define V4L2_AV1_MAX_TILE_ROWS 64 +#define V4L2_AV1_MAX_TILE_COUNT 512 + +#define V4L2_AV1_SEQUENCE_FLAG_STILL_PICTURE 0x00000001 +#define V4L2_AV1_SEQUENCE_FLAG_USE_128X128_SUPERBLOCK 0x00000002 +#define V4L2_AV1_SEQUENCE_FLAG_ENABLE_FILTER_INTRA 0x00000004 +#define V4L2_AV1_SEQUENCE_FLAG_ENABLE_INTRA_EDGE_FILTER 0x00000008 +#define V4L2_AV1_SEQUENCE_FLAG_ENABLE_INTERINTRA_COMPOUND 0x00000010 +#define V4L2_AV1_SEQUENCE_FLAG_ENABLE_MASKED_COMPOUND 0x00000020 +#define V4L2_AV1_SEQUENCE_FLAG_ENABLE_WARPED_MOTION 0x00000040 +#define V4L2_AV1_SEQUENCE_FLAG_ENABLE_DUAL_FILTER 0x00000080 +#define V4L2_AV1_SEQUENCE_FLAG_ENABLE_ORDER_HINT 0x00000100 +#define V4L2_AV1_SEQUENCE_FLAG_ENABLE_JNT_COMP 0x00000200 +#define V4L2_AV1_SEQUENCE_FLAG_ENABLE_REF_FRAME_MVS 0x00000400 +#define V4L2_AV1_SEQUENCE_FLAG_ENABLE_SUPERRES 0x00000800 +#define V4L2_AV1_SEQUENCE_FLAG_ENABLE_CDEF 0x00001000 +#define V4L2_AV1_SEQUENCE_FLAG_ENABLE_RESTORATION 0x00002000 +#define V4L2_AV1_SEQUENCE_FLAG_MONO_CHROME 0x00004000 +#define V4L2_AV1_SEQUENCE_FLAG_COLOR_RANGE 0x00008000 +#define V4L2_AV1_SEQUENCE_FLAG_SUBSAMPLING_X 0x00010000 +#define V4L2_AV1_SEQUENCE_FLAG_SUBSAMPLING_Y 0x00020000 +#define V4L2_AV1_SEQUENCE_FLAG_FILM_GRAIN_PARAMS_PRESENT 0x00040000 +#define V4L2_AV1_SEQUENCE_FLAG_SEPARATE_UV_DELTA_Q 0x00080000 + +#define V4L2_CID_STATELESS_AV1_SEQUENCE (V4L2_CID_CODEC_STATELESS_BASE + 500) +/** + * struct v4l2_ctrl_av1_sequence - AV1 Sequence + * + * Represents an AV1 Sequence OBU. See section 5.5 "Sequence header OBU syntax" + * for more details. + * + * @flags: See V4L2_AV1_SEQUENCE_FLAG_{}. + * @seq_profile: specifies the features that can be used in the coded video + * sequence. + * @order_hint_bits: specifies the number of bits used for the order_hint field + * at each frame. + * @bit_depth: the bitdepth to use for the sequence as described in section + * 5.5.2 "Color config syntax". + * @reserved: padding field. Should be zeroed by applications. + * @max_frame_width_minus_1: specifies the maximum frame width minus 1 for the + * frames represented by this sequence header. + * @max_frame_height_minus_1: specifies the maximum frame height minus 1 for the + * frames represented by this sequence header. + */ +struct v4l2_ctrl_av1_sequence { + __u32 flags; + __u8 seq_profile; + __u8 order_hint_bits; + __u8 bit_depth; + __u8 reserved; + __u16 max_frame_width_minus_1; + __u16 max_frame_height_minus_1; +}; + +#define V4L2_CID_STATELESS_AV1_TILE_GROUP_ENTRY (V4L2_CID_CODEC_STATELESS_BASE + 501) +/** + * struct v4l2_ctrl_av1_tile_group_entry - AV1 Tile Group entry + * + * Represents a single AV1 tile inside an AV1 Tile Group. Note that MiRowStart, + * MiRowEnd, MiColStart and MiColEnd can be retrieved from struct + * v4l2_av1_tile_info in struct v4l2_ctrl_av1_frame using tile_row and + * tile_col. See section 6.10.1 "General tile group OBU semantics" for more + * details. + * + * @tile_offset: offset from the OBU data, i.e. where the coded tile data + * actually starts. + * @tile_size: specifies the size in bytes of the coded tile. Equivalent to + * "TileSize" in the AV1 Specification. + * @tile_row: specifies the row of the current tile. Equivalent to "TileRow" in + * the AV1 Specification. + * @tile_col: specifies the col of the current tile. Equivalent to "TileCol" in + * the AV1 Specification. + */ +struct v4l2_ctrl_av1_tile_group_entry { + __u32 tile_offset; + __u32 tile_size; + __u32 tile_row; + __u32 tile_col; +}; + +/** + * enum v4l2_av1_warp_model - AV1 Warp Model as described in section 3 + * "Symbols and abbreviated terms" of the AV1 Specification. + * + * @V4L2_AV1_WARP_MODEL_IDENTITY: Warp model is just an identity transform. + * @V4L2_AV1_WARP_MODEL_TRANSLATION: Warp model is a pure translation. + * @V4L2_AV1_WARP_MODEL_ROTZOOM: Warp model is a rotation + symmetric zoom + + * translation. + * @V4L2_AV1_WARP_MODEL_AFFINE: Warp model is a general affine transform. + */ +enum v4l2_av1_warp_model { + V4L2_AV1_WARP_MODEL_IDENTITY = 0, + V4L2_AV1_WARP_MODEL_TRANSLATION = 1, + V4L2_AV1_WARP_MODEL_ROTZOOM = 2, + V4L2_AV1_WARP_MODEL_AFFINE = 3, +}; + +/** + * enum v4l2_av1_reference_frame - AV1 reference frames + * + * @V4L2_AV1_REF_INTRA_FRAME: Intra Frame Reference + * @V4L2_AV1_REF_LAST_FRAME: Last Reference Frame + * @V4L2_AV1_REF_LAST2_FRAME: Last2 Reference Frame + * @V4L2_AV1_REF_LAST3_FRAME: Last3 Reference Frame + * @V4L2_AV1_REF_GOLDEN_FRAME: Golden Reference Frame + * @V4L2_AV1_REF_BWDREF_FRAME: BWD Reference Frame + * @V4L2_AV1_REF_ALTREF2_FRAME: Alternative2 Reference Frame + * @V4L2_AV1_REF_ALTREF_FRAME: Alternative Reference Frame + */ +enum v4l2_av1_reference_frame { + V4L2_AV1_REF_INTRA_FRAME = 0, + V4L2_AV1_REF_LAST_FRAME = 1, + V4L2_AV1_REF_LAST2_FRAME = 2, + V4L2_AV1_REF_LAST3_FRAME = 3, + V4L2_AV1_REF_GOLDEN_FRAME = 4, + V4L2_AV1_REF_BWDREF_FRAME = 5, + V4L2_AV1_REF_ALTREF2_FRAME = 6, + V4L2_AV1_REF_ALTREF_FRAME = 7, +}; + +#define V4L2_AV1_GLOBAL_MOTION_IS_INVALID(ref) (1 << (ref)) + +#define V4L2_AV1_GLOBAL_MOTION_FLAG_IS_GLOBAL 0x1 +#define V4L2_AV1_GLOBAL_MOTION_FLAG_IS_ROT_ZOOM 0x2 +#define V4L2_AV1_GLOBAL_MOTION_FLAG_IS_TRANSLATION 0x4 +/** + * struct v4l2_av1_global_motion - AV1 Global Motion parameters as described in + * section 6.8.17 "Global motion params semantics" of the AV1 specification. + * + * @flags: A bitfield containing the flags per reference frame. See + * V4L2_AV1_GLOBAL_MOTION_FLAG_{} + * @type: The type of global motion transform used. + * @params: this field has the same meaning as "gm_params" in the AV1 + * specification. + * @invalid: bitfield indicating whether the global motion params are invalid + * for a given reference frame. See section 7.11.3.6 Setup shear process and + * the variable "warpValid". Use V4L2_AV1_GLOBAL_MOTION_IS_INVALID(ref) to + * create a suitable mask. + * @reserved: padding field. Should be zeroed by applications. + */ + +struct v4l2_av1_global_motion { + __u8 flags[V4L2_AV1_TOTAL_REFS_PER_FRAME]; + enum v4l2_av1_warp_model type[V4L2_AV1_TOTAL_REFS_PER_FRAME]; + __s32 params[V4L2_AV1_TOTAL_REFS_PER_FRAME][6]; + __u8 invalid; + __u8 reserved[3]; +}; + +/** + * enum v4l2_av1_frame_restoration_type - AV1 Frame Restoration Type + * @V4L2_AV1_FRAME_RESTORE_NONE: no filtering is applied. + * @V4L2_AV1_FRAME_RESTORE_WIENER: Wiener filter process is invoked. + * @V4L2_AV1_FRAME_RESTORE_SGRPROJ: self guided filter process is invoked. + * @V4L2_AV1_FRAME_RESTORE_SWITCHABLE: restoration filter is swichtable. + */ +enum v4l2_av1_frame_restoration_type { + V4L2_AV1_FRAME_RESTORE_NONE = 0, + V4L2_AV1_FRAME_RESTORE_WIENER = 1, + V4L2_AV1_FRAME_RESTORE_SGRPROJ = 2, + V4L2_AV1_FRAME_RESTORE_SWITCHABLE = 3, +}; + +#define V4L2_AV1_LOOP_RESTORATION_FLAG_USES_LR 0x1 +#define V4L2_AV1_LOOP_RESTORATION_FLAG_USES_CHROMA_LR 0x2 + +/** + * struct v4l2_av1_loop_restoration - AV1 Loop Restauration as described in + * section 6.10.15 "Loop restoration params semantics" of the AV1 specification. + * + * @flags: See V4L2_AV1_LOOP_RESTORATION_FLAG_{}. + * @lr_unit_shift: specifies if the luma restoration size should be halved. + * @lr_uv_shift: specifies if the chroma size should be half the luma size. + * @reserved: padding field. Should be zeroed by applications. + * @frame_restoration_type: specifies the type of restoration used for each + * plane. See enum v4l2_av1_frame_restoration_type. + * @loop_restoration_size: specifies the size of loop restoration units in units + * of samples in the current plane. + */ +struct v4l2_av1_loop_restoration { + __u8 flags; + __u8 lr_unit_shift; + __u8 lr_uv_shift; + __u8 reserved; + enum v4l2_av1_frame_restoration_type frame_restoration_type[V4L2_AV1_NUM_PLANES_MAX]; + __u32 loop_restoration_size[V4L2_AV1_MAX_NUM_PLANES]; +}; + +/** + * struct v4l2_av1_cdef - AV1 CDEF params semantics as described in section + * 6.10.14 "CDEF params semantics" of the AV1 specification + * + * @damping_minus_3: controls the amount of damping in the deringing filter. + * @bits: specifies the number of bits needed to specify which CDEF filter to + * apply. + * @y_pri_strength: specifies the strength of the primary filter. + * @y_sec_strength: specifies the strength of the secondary filter. + * @uv_pri_strength: specifies the strength of the primary filter. + * @uv_sec_strength: specifies the strength of the secondary filter. + */ +struct v4l2_av1_cdef { + __u8 damping_minus_3; + __u8 bits; + __u8 y_pri_strength[V4L2_AV1_CDEF_MAX]; + __u8 y_sec_strength[V4L2_AV1_CDEF_MAX]; + __u8 uv_pri_strength[V4L2_AV1_CDEF_MAX]; + __u8 uv_sec_strength[V4L2_AV1_CDEF_MAX]; +}; + +#define V4L2_AV1_SEGMENTATION_FLAG_ENABLED 0x1 +#define V4L2_AV1_SEGMENTATION_FLAG_UPDATE_MAP 0x2 +#define V4L2_AV1_SEGMENTATION_FLAG_TEMPORAL_UPDATE 0x4 +#define V4L2_AV1_SEGMENTATION_FLAG_UPDATE_DATA 0x8 +#define V4L2_AV1_SEGMENTATION_FLAG_SEG_ID_PRE_SKIP 0x10 + +/** + * enum v4l2_av1_segment_feature - AV1 segment features as described in section + * 3 "Symbols and abbreviated terms" of the AV1 specification. + * + * @V4L2_AV1_SEG_LVL_ALT_Q: Index for quantizer segment feature. + * @V4L2_AV1_SEG_LVL_ALT_LF_Y_V: Index for vertical luma loop filter segment + * feature. + * @V4L2_AV1_SEG_LVL_REF_FRAME: Index for reference frame segment feature. + * @V4L2_AV1_SEG_LVL_REF_SKIP: Index for skip segment feature. + * @V4L2_AV1_SEG_LVL_REF_GLOBALMV: Index for global mv feature. + * @V4L2_AV1_SEG_LVL_MAX: Number of segment features. + */ +enum v4l2_av1_segment_feature { + V4L2_AV1_SEG_LVL_ALT_Q = 0, + V4L2_AV1_SEG_LVL_ALT_LF_Y_V = 1, + V4L2_AV1_SEG_LVL_REF_FRAME = 5, + V4L2_AV1_SEG_LVL_REF_SKIP = 6, + V4L2_AV1_SEG_LVL_REF_GLOBALMV = 7, + V4L2_AV1_SEG_LVL_MAX = 8 +}; + +#define V4L2_AV1_SEGMENT_FEATURE_ENABLED(id) (1 << (id)) + +/** + * struct v4l2_av1_segmentation - AV1 Segmentation params as defined in section + * 6.8.13 "Segmentation params semantics" of the AV1 specification. + * + * @flags: see V4L2_AV1_SEGMENTATION_FLAG_{}. + * @last_active_seg_id: indicates the highest numbered segment id that has some + * enabled feature. This is used when decoding the segment id to only decode + * choices corresponding to used segments. + * @feature_enabled: bitmask defining which features are enabled in each + * segment. Use V4L2_AV1_SEGMENT_FEATURE_ENABLED to build a suitable mask. + * @feature_data: data attached to each feature. Data entry is only valid if the + * feature is enabled + */ +struct v4l2_av1_segmentation { + __u8 flags; + __u8 last_active_seg_id; + __u8 feature_enabled[V4L2_AV1_MAX_SEGMENTS]; + __s16 feature_data[V4L2_AV1_MAX_SEGMENTS][V4L2_AV1_SEG_LVL_MAX]; +}; + +#define V4L2_AV1_LOOP_FILTER_FLAG_DELTA_ENABLED 0x1 +#define V4L2_AV1_LOOP_FILTER_FLAG_DELTA_UPDATE 0x2 +#define V4L2_AV1_LOOP_FILTER_FLAG_DELTA_LF_PRESENT 0x4 +#define V4L2_AV1_LOOP_FILTER_FLAG_DELTA_LF_MULTI 0x8 + +/** + * struct v4l2_av1_loop_filter - AV1 Loop filter params as defined in section + * 6.8.10 "Loop filter semantics" and 6.8.16 "Loop filter delta parameters + * semantics" of the AV1 specification. + * + * @flags: see V4L2_AV1_LOOP_FILTER_FLAG_{} + * @level: an array containing loop filter strength values. Different loop + * filter strength values from the array are used depending on the image plane + * being filtered, and the edge direction (vertical or horizontal) being + * filtered. + * @sharpness: indicates the sharpness level. The loop_filter_level and + * loop_filter_sharpness together determine when a block edge is filtered, and + * by how much the filtering can change the sample values. The loop filter + * process is described in section 7.14 of the AV1 specification. + * @ref_deltas: contains the adjustment needed for the filter level based on the + * chosen reference frame. If this syntax element is not present, it maintains + * its previous value. + * @mode_deltas: contains the adjustment needed for the filter level based on + * the chosen mode. If this syntax element is not present, it maintains its + * previous value. + * @delta_lf_res: specifies the left shift which should be applied to decoded + * loop filter delta values. + */ +struct v4l2_av1_loop_filter { + __u8 flags; + __u8 level[4]; + __u8 sharpness; + __s8 ref_deltas[V4L2_AV1_TOTAL_REFS_PER_FRAME]; + __s8 mode_deltas[2]; + __u8 delta_lf_res; +}; + +#define V4L2_AV1_QUANTIZATION_FLAG_DIFF_UV_DELTA 0x1 +#define V4L2_AV1_QUANTIZATION_FLAG_USING_QMATRIX 0x2 +#define V4L2_AV1_QUANTIZATION_FLAG_DELTA_Q_PRESENT 0x4 + +/** + * struct v4l2_av1_quantization - AV1 Quantization params as defined in section + * 6.8.11 "Quantization params semantics" of the AV1 specification. + * + * @flags: see V4L2_AV1_QUANTIZATION_FLAG_{} + * @base_q_idx: indicates the base frame qindex. This is used for Y AC + * coefficients and as the base value for the other quantizers. + * @delta_q_y_dc: indicates the Y DC quantizer relative to base_q_idx. + * @delta_q_u_dc: indicates the U DC quantizer relative to base_q_idx. + * @delta_q_u_ac: indicates the U AC quantizer relative to base_q_idx. + * @delta_q_v_dc: indicates the V DC quantizer relative to base_q_idx. + * @delta_q_v_ac: indicates the V AC quantizer relative to base_q_idx. + * @qm_y: specifies the level in the quantizer matrix that should be used for + * luma plane decoding. + * @qm_u: specifies the level in the quantizer matrix that should be used for + * chroma U plane decoding. + * @qm_v: specifies the level in the quantizer matrix that should be used for + * chroma V plane decoding. + * @delta_q_res: specifies the left shift which should be applied to decoded + * quantizer index delta values. + */ +struct v4l2_av1_quantization { + __u8 flags; + __u8 base_q_idx; + __s8 delta_q_y_dc; + __s8 delta_q_u_dc; + __s8 delta_q_u_ac; + __s8 delta_q_v_dc; + __s8 delta_q_v_ac; + __u8 qm_y; + __u8 qm_u; + __u8 qm_v; + __u8 delta_q_res; +}; + +#define V4L2_AV1_TILE_INFO_FLAG_UNIFORM_TILE_SPACING 0x1 + +/** + * struct v4l2_av1_tile_info - AV1 Tile info as defined in section 6.8.14 "Tile + * info semantics" of the AV1 specification. + * + * @flags: see V4L2_AV1_TILE_INFO_FLAG_{} + * @context_update_tile_id: specifies which tile to use for the CDF update. + * @tile_rows: specifies the number of tiles down the frame. + * @tile_cols: specifies the number of tiles across the frame. + * @mi_col_starts: an array specifying the start column (in units of 4x4 luma + * samples) for each tile across the image. + * @mi_row_starts: an array specifying the start row (in units of 4x4 luma + * samples) for each tile down the image. + * @width_in_sbs_minus_1: specifies the width of a tile minus 1 in units of + * superblocks. + * @height_in_sbs_minus_1: specifies the height of a tile minus 1 in units of + * superblocks. + * @tile_size_bytes: specifies the number of bytes needed to code each tile + * size. + * @reserved: padding field. Should be zeroed by applications. + */ +struct v4l2_av1_tile_info { + __u8 flags; + __u8 context_update_tile_id; + __u8 tile_cols; + __u8 tile_rows; + __u32 mi_col_starts[V4L2_AV1_MAX_TILE_COLS + 1]; + __u32 mi_row_starts[V4L2_AV1_MAX_TILE_ROWS + 1]; + __u32 width_in_sbs_minus_1[V4L2_AV1_MAX_TILE_COLS]; + __u32 height_in_sbs_minus_1[V4L2_AV1_MAX_TILE_ROWS]; + __u8 tile_size_bytes; + __u8 reserved[3]; +}; + +/** + * enum v4l2_av1_frame_type - AV1 Frame Type + * + * @V4L2_AV1_KEY_FRAME: Key frame + * @V4L2_AV1_INTER_FRAME: Inter frame + * @V4L2_AV1_INTRA_ONLY_FRAME: Intra-only frame + * @V4L2_AV1_SWITCH_FRAME: Switch frame + */ +enum v4l2_av1_frame_type { + V4L2_AV1_KEY_FRAME = 0, + V4L2_AV1_INTER_FRAME = 1, + V4L2_AV1_INTRA_ONLY_FRAME = 2, + V4L2_AV1_SWITCH_FRAME = 3 +}; + +/** + * enum v4l2_av1_interpolation_filter - AV1 interpolation filter types + * + * @V4L2_AV1_INTERPOLATION_FILTER_EIGHTTAP: eight tap filter + * @V4L2_AV1_INTERPOLATION_FILTER_EIGHTTAP_SMOOTH: eight tap smooth filter + * @V4L2_AV1_INTERPOLATION_FILTER_EIGHTTAP_SHARP: eight tap sharp filter + * @V4L2_AV1_INTERPOLATION_FILTER_BILINEAR: bilinear filter + * @V4L2_AV1_INTERPOLATION_FILTER_SWITCHABLE: filter selection is signaled at + * the block level + * + * See section 6.8.9 "Interpolation filter semantics" of the AV1 specification + * for more details. + */ +enum v4l2_av1_interpolation_filter { + V4L2_AV1_INTERPOLATION_FILTER_EIGHTTAP = 0, + V4L2_AV1_INTERPOLATION_FILTER_EIGHTTAP_SMOOTH = 1, + V4L2_AV1_INTERPOLATION_FILTER_EIGHTTAP_SHARP = 2, + V4L2_AV1_INTERPOLATION_FILTER_BILINEAR = 3, + V4L2_AV1_INTERPOLATION_FILTER_SWITCHABLE = 4, +}; + +/** + * enum v4l2_av1_tx_mode - AV1 Tx mode as described in section 6.8.21 "TX mode + * semantics" of the AV1 specification. + * @V4L2_AV1_TX_MODE_ONLY_4X4: the inverse transform will use only 4x4 + * transforms + * @V4L2_AV1_TX_MODE_LARGEST: the inverse transform will use the largest + * transform size that fits inside the block + * @V4L2_AV1_TX_MODE_SELECT: the choice of transform size is specified + * explicitly for each block. + */ +enum v4l2_av1_tx_mode { + V4L2_AV1_TX_MODE_ONLY_4X4 = 0, + V4L2_AV1_TX_MODE_LARGEST = 1, + V4L2_AV1_TX_MODE_SELECT = 2 +}; + +#define V4L2_AV1_FRAME_FLAG_SHOW_FRAME 0x00000001 +#define V4L2_AV1_FRAME_FLAG_SHOWABLE_FRAME 0x00000002 +#define V4L2_AV1_FRAME_FLAG_ERROR_RESILIENT_MODE 0x00000004 +#define V4L2_AV1_FRAME_FLAG_DISABLE_CDF_UPDATE 0x00000008 +#define V4L2_AV1_FRAME_FLAG_ALLOW_SCREEN_CONTENT_TOOLS 0x00000010 +#define V4L2_AV1_FRAME_FLAG_FORCE_INTEGER_MV 0x00000020 +#define V4L2_AV1_FRAME_FLAG_ALLOW_INTRABC 0x00000040 +#define V4L2_AV1_FRAME_FLAG_USE_SUPERRES 0x00000080 +#define V4L2_AV1_FRAME_FLAG_ALLOW_HIGH_PRECISION_MV 0x00000100 +#define V4L2_AV1_FRAME_FLAG_IS_MOTION_MODE_SWITCHABLE 0x00000200 +#define V4L2_AV1_FRAME_FLAG_USE_REF_FRAME_MVS 0x00000400 +#define V4L2_AV1_FRAME_FLAG_DISABLE_FRAME_END_UPDATE_CDF 0x00000800 +#define V4L2_AV1_FRAME_FLAG_ALLOW_WARPED_MOTION 0x00001000 +#define V4L2_AV1_FRAME_FLAG_REFERENCE_SELECT 0x00002000 +#define V4L2_AV1_FRAME_FLAG_REDUCED_TX_SET 0x00004000 +#define V4L2_AV1_FRAME_FLAG_SKIP_MODE_ALLOWED 0x00008000 +#define V4L2_AV1_FRAME_FLAG_SKIP_MODE_PRESENT 0x00010000 +#define V4L2_AV1_FRAME_FLAG_FRAME_SIZE_OVERRIDE 0x00020000 +#define V4L2_AV1_FRAME_FLAG_BUFFER_REMOVAL_TIME_PRESENT 0x00040000 +#define V4L2_AV1_FRAME_FLAG_FRAME_REFS_SHORT_SIGNALING 0x00080000 + +#define V4L2_CID_STATELESS_AV1_FRAME (V4L2_CID_CODEC_STATELESS_BASE + 502) +/** + * struct v4l2_ctrl_av1_frame - Represents an AV1 Frame Header OBU. + * + * @tile_info: tile info + * @quantization: quantization params + * @segmentation: segmentation params + * @superres_denom: the denominator for the upscaling ratio. + * @loop_filter: loop filter params + * @cdef: cdef params + * @skip_mode_frame: specifies the frames to use for compound prediction when + * skip_mode is equal to 1. + * @primary_ref_frame: specifies which reference frame contains the CDF values + * and other state that should be loaded at the start of the frame. + * @loop_restoration: loop restoration params + * @global_motion: global motion params + * @flags: see V4L2_AV1_FRAME_FLAG_{} + * @frame_type: specifies the AV1 frame type + * @order_hint: specifies OrderHintBits least significant bits of the expected + * output order for this frame. + * @upscaled_width: the upscaled width. + * @interpolation_filter: specifies the filter selection used for performing + * inter prediction. + * @tx_mode: specifies how the transform size is determined. + * @frame_width_minus_1: add 1 to get the frame's width. + * @frame_height_minus_1: add 1 to get the frame's height + * @render_width_minus_1: add 1 to get the render width of the frame in luma + * samples. + * @render_height_minus_1: add 1 to get the render height of the frame in luma + * samples. + * @current_frame_id: specifies the frame id number for the current frame. Frame + * id numbers are additional information that do not affect the decoding + * process, but provide decoders with a way of detecting missing reference + * frames so that appropriate action can be taken. + * @buffer_removal_time: specifies the frame removal time in units of DecCT clock + * ticks counted from the removal time of the last random access point for + * operating point opNum. + * @reserved: padding field. Should be zeroed by applications. + * @order_hints: specifies the expected output order hint for each reference + * frame. This field corresponds to the OrderHints variable from the + * specification (section 5.9.2 "Uncompressed header syntax"). As such, this is + * only used for non-intra frames and ignored otherwise. order_hints[0] is + * always ignored. + * @reference_frame_ts: the V4L2 timestamp of the reference frame slots. + * @ref_frame_idx: used to index into @reference_frame_ts when decoding + * inter-frames. The meaning of this array is the same as in the specification. + * The timestamp refers to the timestamp field in struct v4l2_buffer. Use + * v4l2_timeval_to_ns() to convert the struct timeval to a __u64. + * @refresh_frame_flags: contains a bitmask that specifies which reference frame + * slots will be updated with the current frame after it is decoded. + */ +struct v4l2_ctrl_av1_frame { + struct v4l2_av1_tile_info tile_info; + struct v4l2_av1_quantization quantization; + __u8 superres_denom; + struct v4l2_av1_segmentation segmentation; + struct v4l2_av1_loop_filter loop_filter; + struct v4l2_av1_cdef cdef; + __u8 skip_mode_frame[2]; + __u8 primary_ref_frame; + struct v4l2_av1_loop_restoration loop_restoration; + struct v4l2_av1_global_motion global_motion; + __u32 flags; + enum v4l2_av1_frame_type frame_type; + __u32 order_hint; + __u32 upscaled_width; + enum v4l2_av1_interpolation_filter interpolation_filter; + enum v4l2_av1_tx_mode tx_mode; + __u32 frame_width_minus_1; + __u32 frame_height_minus_1; + __u16 render_width_minus_1; + __u16 render_height_minus_1; + + __u32 current_frame_id; + __u32 buffer_removal_time[V4L2_AV1_MAX_OPERATING_POINTS]; + __u8 reserved[4]; + __u32 order_hints[V4L2_AV1_TOTAL_REFS_PER_FRAME]; + __u64 reference_frame_ts[V4L2_AV1_TOTAL_REFS_PER_FRAME]; + __s8 ref_frame_idx[V4L2_AV1_REFS_PER_FRAME]; + __u8 refresh_frame_flags; +}; + +#define V4L2_AV1_FILM_GRAIN_FLAG_APPLY_GRAIN 0x1 +#define V4L2_AV1_FILM_GRAIN_FLAG_UPDATE_GRAIN 0x2 +#define V4L2_AV1_FILM_GRAIN_FLAG_CHROMA_SCALING_FROM_LUMA 0x4 +#define V4L2_AV1_FILM_GRAIN_FLAG_OVERLAP 0x8 +#define V4L2_AV1_FILM_GRAIN_FLAG_CLIP_TO_RESTRICTED_RANGE 0x10 + +#define V4L2_CID_STATELESS_AV1_FILM_GRAIN (V4L2_CID_CODEC_STATELESS_BASE + 505) +/** + * struct v4l2_ctrl_av1_film_grain - AV1 Film Grain parameters. + * + * Film grain parameters as specified by section 6.8.20 of the AV1 Specification. + * + * @flags: see V4L2_AV1_FILM_GRAIN_{}. + * @cr_mult: represents a multiplier for the cr component used in derivation of + * the input index to the cr component scaling function. + * @grain_seed: specifies the starting value for the pseudo-random numbers used + * during film grain synthesis. + * @film_grain_params_ref_idx: indicates which reference frame contains the + * film grain parameters to be used for this frame. + * @num_y_points: specifies the number of points for the piece-wise linear + * scaling function of the luma component. + * @point_y_value: represents the x (luma value) coordinate for the i-th point + * of the piecewise linear scaling function for luma component. The values are + * signaled on the scale of 0..255. In case of 10 bit video, these values + * correspond to luma values divided by 4. In case of 12 bit video, these values + * correspond to luma values divided by 16. + * @point_y_scaling: represents the scaling (output) value for the i-th point + * of the piecewise linear scaling function for luma component. + * @num_cb_points: specifies the number of points for the piece-wise linear + * scaling function of the cb component. + * @point_cb_value: represents the x coordinate for the i-th point of the + * piece-wise linear scaling function for cb component. The values are signaled + * on the scale of 0..255. + * @point_cb_scaling: represents the scaling (output) value for the i-th point + * of the piecewise linear scaling function for cb component. + * @num_cr_points: specifies represents the number of points for the piece-wise + * linear scaling function of the cr component. + * @point_cr_value: represents the x coordinate for the i-th point of the + * piece-wise linear scaling function for cr component. The values are signaled + * on the scale of 0..255. + * @point_cr_scaling: represents the scaling (output) value for the i-th point + * of the piecewise linear scaling function for cr component. + * @grain_scaling_minus_8: represents the shift – 8 applied to the values of the + * chroma component. The grain_scaling_minus_8 can take values of 0..3 and + * determines the range and quantization step of the standard deviation of film + * grain. + * @ar_coeff_lag: specifies the number of auto-regressive coefficients for luma + * and chroma. + * @ar_coeffs_y_plus_128: specifies auto-regressive coefficients used for the Y + * plane. + * @ar_coeffs_cb_plus_128: specifies auto-regressive coefficients used for the U + * plane. + * @ar_coeffs_cr_plus_128: specifies auto-regressive coefficients used for the V + * plane. + * @ar_coeff_shift_minus_6: specifies the range of the auto-regressive + * coefficients. Values of 0, 1, 2, and 3 correspond to the ranges for + * auto-regressive coefficients of [-2, 2), [-1, 1), [-0.5, 0.5) and [-0.25, + * 0.25) respectively. + * @grain_scale_shift: specifies how much the Gaussian random numbers should be + * scaled down during the grain synthesis process. + * @cb_mult: represents a multiplier for the cb component used in derivation of + * the input index to the cb component scaling function. + * @cb_luma_mult: represents a multiplier for the average luma component used in + * derivation of the input index to the cb component scaling function. + * @cr_luma_mult: represents a multiplier for the average luma component used in + * derivation of the input index to the cr component scaling function. + * @cb_offset: represents an offset used in derivation of the input index to the + * cb component scaling function. + * @cr_offset: represents an offset used in derivation of the input index to the + * cr component scaling function. + * @reserved: padding field. Should be zeroed by applications. + */ +struct v4l2_ctrl_av1_film_grain { + __u8 flags; + __u8 cr_mult; + __u16 grain_seed; + __u8 film_grain_params_ref_idx; + __u8 num_y_points; + __u8 point_y_value[V4L2_AV1_MAX_NUM_Y_POINTS]; + __u8 point_y_scaling[V4L2_AV1_MAX_NUM_Y_POINTS]; + __u8 num_cb_points; + __u8 point_cb_value[V4L2_AV1_MAX_NUM_CB_POINTS]; + __u8 point_cb_scaling[V4L2_AV1_MAX_NUM_CB_POINTS]; + __u8 num_cr_points; + __u8 point_cr_value[V4L2_AV1_MAX_NUM_CR_POINTS]; + __u8 point_cr_scaling[V4L2_AV1_MAX_NUM_CR_POINTS]; + __u8 grain_scaling_minus_8; + __u8 ar_coeff_lag; + __u8 ar_coeffs_y_plus_128[V4L2_AV1_AR_COEFFS_SIZE]; + __u8 ar_coeffs_cb_plus_128[V4L2_AV1_AR_COEFFS_SIZE]; + __u8 ar_coeffs_cr_plus_128[V4L2_AV1_AR_COEFFS_SIZE]; + __u8 ar_coeff_shift_minus_6; + __u8 grain_scale_shift; + __u8 cb_mult; + __u8 cb_luma_mult; + __u8 cr_luma_mult; + __u16 cb_offset; + __u16 cr_offset; + __u8 reserved[4]; +}; + /* MPEG-compression definitions kept for backwards compatibility */ #ifndef __KERNEL__ #define V4L2_CTRL_CLASS_MPEG V4L2_CTRL_CLASS_CODEC diff --git a/include/uapi/linux/v4l2-subdev.h b/include/uapi/linux/v4l2-subdev.h index 654d659de835..4a195b68f28f 100644 --- a/include/uapi/linux/v4l2-subdev.h +++ b/include/uapi/linux/v4l2-subdev.h @@ -233,6 +233,24 @@ struct v4l2_subdev_routing { __u32 reserved[6]; }; +/* + * The client is aware of streams. Setting this flag enables the use of 'stream' + * fields (referring to the stream number) with various ioctls. If this is not + * set (which is the default), the 'stream' fields will be forced to 0 by the + * kernel. + */ + #define V4L2_SUBDEV_CLIENT_CAP_STREAMS (1U << 0) + +/** + * struct v4l2_subdev_client_capability - Capabilities of the client accessing + * the subdev + * + * @capabilities: A bitmask of V4L2_SUBDEV_CLIENT_CAP_* flags. + */ +struct v4l2_subdev_client_capability { + __u64 capabilities; +}; + /* Backwards compatibility define --- to be removed */ #define v4l2_subdev_edid v4l2_edid @@ -250,6 +268,9 @@ struct v4l2_subdev_routing { #define VIDIOC_SUBDEV_S_SELECTION _IOWR('V', 62, struct v4l2_subdev_selection) #define VIDIOC_SUBDEV_G_ROUTING _IOWR('V', 38, struct v4l2_subdev_routing) #define VIDIOC_SUBDEV_S_ROUTING _IOWR('V', 39, struct v4l2_subdev_routing) +#define VIDIOC_SUBDEV_G_CLIENT_CAP _IOR('V', 101, struct v4l2_subdev_client_capability) +#define VIDIOC_SUBDEV_S_CLIENT_CAP _IOWR('V', 102, struct v4l2_subdev_client_capability) + /* The following ioctls are identical to the ioctls in videodev2.h */ #define VIDIOC_SUBDEV_G_STD _IOR('V', 23, v4l2_std_id) #define VIDIOC_SUBDEV_S_STD _IOW('V', 24, v4l2_std_id) diff --git a/include/uapi/linux/vfio.h b/include/uapi/linux/vfio.h index 0552e8dcf0cb..afc1369216d9 100644 --- a/include/uapi/linux/vfio.h +++ b/include/uapi/linux/vfio.h @@ -213,9 +213,11 @@ struct vfio_device_info { #define VFIO_DEVICE_FLAGS_AP (1 << 5) /* vfio-ap device */ #define VFIO_DEVICE_FLAGS_FSL_MC (1 << 6) /* vfio-fsl-mc device */ #define VFIO_DEVICE_FLAGS_CAPS (1 << 7) /* Info supports caps */ +#define VFIO_DEVICE_FLAGS_CDX (1 << 8) /* vfio-cdx device */ __u32 num_regions; /* Max region index + 1 */ __u32 num_irqs; /* Max IRQ index + 1 */ __u32 cap_offset; /* Offset within info struct of first cap */ + __u32 pad; }; #define VFIO_DEVICE_GET_INFO _IO(VFIO_TYPE, VFIO_BASE + 7) @@ -240,6 +242,20 @@ struct vfio_device_info { #define VFIO_DEVICE_INFO_CAP_ZPCI_UTIL 3 #define VFIO_DEVICE_INFO_CAP_ZPCI_PFIP 4 +/* + * The following VFIO_DEVICE_INFO capability reports support for PCIe AtomicOp + * completion to the root bus with supported widths provided via flags. + */ +#define VFIO_DEVICE_INFO_CAP_PCI_ATOMIC_COMP 5 +struct vfio_device_info_cap_pci_atomic_comp { + struct vfio_info_cap_header header; + __u32 flags; +#define VFIO_PCI_ATOMIC_COMP32 (1 << 0) +#define VFIO_PCI_ATOMIC_COMP64 (1 << 1) +#define VFIO_PCI_ATOMIC_COMP128 (1 << 2) + __u32 reserved; +}; + /** * VFIO_DEVICE_GET_REGION_INFO - _IOWR(VFIO_TYPE, VFIO_BASE + 8, * struct vfio_region_info) @@ -511,6 +527,9 @@ struct vfio_region_info_cap_nvlink2_lnkspd { * then add and unmask vectors, it's up to userspace to make the decision * whether to allocate the maximum supported number of vectors or tear * down setup and incrementally increase the vectors as each is enabled. + * Absence of the NORESIZE flag indicates that vectors can be enabled + * and disabled dynamically without impacting other vectors within the + * index. */ struct vfio_irq_info { __u32 argsz; @@ -646,15 +665,73 @@ enum { VFIO_CCW_NUM_IRQS }; +/* + * The vfio-ap bus driver makes use of the following IRQ index mapping. + * Unimplemented IRQ types return a count of zero. + */ +enum { + VFIO_AP_REQ_IRQ_INDEX, + VFIO_AP_NUM_IRQS +}; + /** * VFIO_DEVICE_GET_PCI_HOT_RESET_INFO - _IOWR(VFIO_TYPE, VFIO_BASE + 12, * struct vfio_pci_hot_reset_info) * + * This command is used to query the affected devices in the hot reset for + * a given device. + * + * This command always reports the segment, bus, and devfn information for + * each affected device, and selectively reports the group_id or devid per + * the way how the calling device is opened. + * + * - If the calling device is opened via the traditional group/container + * API, group_id is reported. User should check if it has owned all + * the affected devices and provides a set of group fds to prove the + * ownership in VFIO_DEVICE_PCI_HOT_RESET ioctl. + * + * - If the calling device is opened as a cdev, devid is reported. + * Flag VFIO_PCI_HOT_RESET_FLAG_DEV_ID is set to indicate this + * data type. All the affected devices should be represented in + * the dev_set, ex. bound to a vfio driver, and also be owned by + * this interface which is determined by the following conditions: + * 1) Has a valid devid within the iommufd_ctx of the calling device. + * Ownership cannot be determined across separate iommufd_ctx and + * the cdev calling conventions do not support a proof-of-ownership + * model as provided in the legacy group interface. In this case + * valid devid with value greater than zero is provided in the return + * structure. + * 2) Does not have a valid devid within the iommufd_ctx of the calling + * device, but belongs to the same IOMMU group as the calling device + * or another opened device that has a valid devid within the + * iommufd_ctx of the calling device. This provides implicit ownership + * for devices within the same DMA isolation context. In this case + * the devid value of VFIO_PCI_DEVID_OWNED is provided in the return + * structure. + * + * A devid value of VFIO_PCI_DEVID_NOT_OWNED is provided in the return + * structure for affected devices where device is NOT represented in the + * dev_set or ownership is not available. Such devices prevent the use + * of VFIO_DEVICE_PCI_HOT_RESET ioctl outside of the proof-of-ownership + * calling conventions (ie. via legacy group accessed devices). Flag + * VFIO_PCI_HOT_RESET_FLAG_DEV_ID_OWNED would be set when all the + * affected devices are represented in the dev_set and also owned by + * the user. This flag is available only when + * flag VFIO_PCI_HOT_RESET_FLAG_DEV_ID is set, otherwise reserved. + * When set, user could invoke VFIO_DEVICE_PCI_HOT_RESET with a zero + * length fd array on the calling device as the ownership is validated + * by iommufd_ctx. + * * Return: 0 on success, -errno on failure: * -enospc = insufficient buffer, -enodev = unsupported for device. */ struct vfio_pci_dependent_device { - __u32 group_id; + union { + __u32 group_id; + __u32 devid; +#define VFIO_PCI_DEVID_OWNED 0 +#define VFIO_PCI_DEVID_NOT_OWNED -1 + }; __u16 segment; __u8 bus; __u8 devfn; /* Use PCI_SLOT/PCI_FUNC */ @@ -663,6 +740,8 @@ struct vfio_pci_dependent_device { struct vfio_pci_hot_reset_info { __u32 argsz; __u32 flags; +#define VFIO_PCI_HOT_RESET_FLAG_DEV_ID (1 << 0) +#define VFIO_PCI_HOT_RESET_FLAG_DEV_ID_OWNED (1 << 1) __u32 count; struct vfio_pci_dependent_device devices[]; }; @@ -673,6 +752,24 @@ struct vfio_pci_hot_reset_info { * VFIO_DEVICE_PCI_HOT_RESET - _IOW(VFIO_TYPE, VFIO_BASE + 13, * struct vfio_pci_hot_reset) * + * A PCI hot reset results in either a bus or slot reset which may affect + * other devices sharing the bus/slot. The calling user must have + * ownership of the full set of affected devices as determined by the + * VFIO_DEVICE_GET_PCI_HOT_RESET_INFO ioctl. + * + * When called on a device file descriptor acquired through the vfio + * group interface, the user is required to provide proof of ownership + * of those affected devices via the group_fds array in struct + * vfio_pci_hot_reset. + * + * When called on a direct cdev opened vfio device, the flags field of + * struct vfio_pci_hot_reset_info reports the ownership status of the + * affected devices and this ioctl must be called with an empty group_fds + * array. See above INFO ioctl definition for ownership requirements. + * + * Mixed usage of legacy groups and cdevs across the set of affected + * devices is not supported. + * * Return: 0 on success, -errno on failure. */ struct vfio_pci_hot_reset { @@ -802,6 +899,83 @@ struct vfio_device_feature { #define VFIO_DEVICE_FEATURE _IO(VFIO_TYPE, VFIO_BASE + 17) /* + * VFIO_DEVICE_BIND_IOMMUFD - _IOR(VFIO_TYPE, VFIO_BASE + 18, + * struct vfio_device_bind_iommufd) + * @argsz: User filled size of this data. + * @flags: Must be 0. + * @iommufd: iommufd to bind. + * @out_devid: The device id generated by this bind. devid is a handle for + * this device/iommufd bond and can be used in IOMMUFD commands. + * + * Bind a vfio_device to the specified iommufd. + * + * User is restricted from accessing the device before the binding operation + * is completed. Only allowed on cdev fds. + * + * Unbind is automatically conducted when device fd is closed. + * + * Return: 0 on success, -errno on failure. + */ +struct vfio_device_bind_iommufd { + __u32 argsz; + __u32 flags; + __s32 iommufd; + __u32 out_devid; +}; + +#define VFIO_DEVICE_BIND_IOMMUFD _IO(VFIO_TYPE, VFIO_BASE + 18) + +/* + * VFIO_DEVICE_ATTACH_IOMMUFD_PT - _IOW(VFIO_TYPE, VFIO_BASE + 19, + * struct vfio_device_attach_iommufd_pt) + * @argsz: User filled size of this data. + * @flags: Must be 0. + * @pt_id: Input the target id which can represent an ioas or a hwpt + * allocated via iommufd subsystem. + * Output the input ioas id or the attached hwpt id which could + * be the specified hwpt itself or a hwpt automatically created + * for the specified ioas by kernel during the attachment. + * + * Associate the device with an address space within the bound iommufd. + * Undo by VFIO_DEVICE_DETACH_IOMMUFD_PT or device fd close. This is only + * allowed on cdev fds. + * + * If a vfio device is currently attached to a valid hw_pagetable, without doing + * a VFIO_DEVICE_DETACH_IOMMUFD_PT, a second VFIO_DEVICE_ATTACH_IOMMUFD_PT ioctl + * passing in another hw_pagetable (hwpt) id is allowed. This action, also known + * as a hw_pagetable replacement, will replace the device's currently attached + * hw_pagetable with a new hw_pagetable corresponding to the given pt_id. + * + * Return: 0 on success, -errno on failure. + */ +struct vfio_device_attach_iommufd_pt { + __u32 argsz; + __u32 flags; + __u32 pt_id; +}; + +#define VFIO_DEVICE_ATTACH_IOMMUFD_PT _IO(VFIO_TYPE, VFIO_BASE + 19) + +/* + * VFIO_DEVICE_DETACH_IOMMUFD_PT - _IOW(VFIO_TYPE, VFIO_BASE + 20, + * struct vfio_device_detach_iommufd_pt) + * @argsz: User filled size of this data. + * @flags: Must be 0. + * + * Remove the association of the device and its current associated address + * space. After it, the device should be in a blocking DMA state. This is only + * allowed on cdev fds. + * + * Return: 0 on success, -errno on failure. + */ +struct vfio_device_detach_iommufd_pt { + __u32 argsz; + __u32 flags; +}; + +#define VFIO_DEVICE_DETACH_IOMMUFD_PT _IO(VFIO_TYPE, VFIO_BASE + 20) + +/* * Provide support for setting a PCI VF Token, which is used as a shared * secret between PF and VF drivers. This feature may only be set on a * PCI SR-IOV PF when SR-IOV is enabled on the PF and there are no existing @@ -1277,6 +1451,7 @@ struct vfio_iommu_type1_info { #define VFIO_IOMMU_INFO_CAPS (1 << 1) /* Info supports caps */ __u64 iova_pgsizes; /* Bitmap of supported page sizes */ __u32 cap_offset; /* Offset within info struct of first cap */ + __u32 pad; }; /* diff --git a/include/uapi/linux/vhost.h b/include/uapi/linux/vhost.h index 92e1b700b51c..f5c48b61ab62 100644 --- a/include/uapi/linux/vhost.h +++ b/include/uapi/linux/vhost.h @@ -45,6 +45,25 @@ #define VHOST_SET_LOG_BASE _IOW(VHOST_VIRTIO, 0x04, __u64) /* Specify an eventfd file descriptor to signal on log write. */ #define VHOST_SET_LOG_FD _IOW(VHOST_VIRTIO, 0x07, int) +/* By default, a device gets one vhost_worker that its virtqueues share. This + * command allows the owner of the device to create an additional vhost_worker + * for the device. It can later be bound to 1 or more of its virtqueues using + * the VHOST_ATTACH_VRING_WORKER command. + * + * This must be called after VHOST_SET_OWNER and the caller must be the owner + * of the device. The new thread will inherit caller's cgroups and namespaces, + * and will share the caller's memory space. The new thread will also be + * counted against the caller's RLIMIT_NPROC value. + * + * The worker's ID used in other commands will be returned in + * vhost_worker_state. + */ +#define VHOST_NEW_WORKER _IOR(VHOST_VIRTIO, 0x8, struct vhost_worker_state) +/* Free a worker created with VHOST_NEW_WORKER if it's not attached to any + * virtqueue. If userspace is not able to call this for workers its created, + * the kernel will free all the device's workers when the device is closed. + */ +#define VHOST_FREE_WORKER _IOW(VHOST_VIRTIO, 0x9, struct vhost_worker_state) /* Ring setup. */ /* Set number of descriptors in ring. This parameter can not @@ -70,6 +89,18 @@ #define VHOST_VRING_BIG_ENDIAN 1 #define VHOST_SET_VRING_ENDIAN _IOW(VHOST_VIRTIO, 0x13, struct vhost_vring_state) #define VHOST_GET_VRING_ENDIAN _IOW(VHOST_VIRTIO, 0x14, struct vhost_vring_state) +/* Attach a vhost_worker created with VHOST_NEW_WORKER to one of the device's + * virtqueues. + * + * This will replace the virtqueue's existing worker. If the replaced worker + * is no longer attached to any virtqueues, it can be freed with + * VHOST_FREE_WORKER. + */ +#define VHOST_ATTACH_VRING_WORKER _IOW(VHOST_VIRTIO, 0x15, \ + struct vhost_vring_worker) +/* Return the vring worker's ID */ +#define VHOST_GET_VRING_WORKER _IOWR(VHOST_VIRTIO, 0x16, \ + struct vhost_vring_worker) /* The following ioctls use eventfd file descriptors to signal and poll * for events. */ diff --git a/include/uapi/linux/vhost_types.h b/include/uapi/linux/vhost_types.h index c5690a8992d8..2d827d22cd99 100644 --- a/include/uapi/linux/vhost_types.h +++ b/include/uapi/linux/vhost_types.h @@ -47,6 +47,22 @@ struct vhost_vring_addr { __u64 log_guest_addr; }; +struct vhost_worker_state { + /* + * For VHOST_NEW_WORKER the kernel will return the new vhost_worker id. + * For VHOST_FREE_WORKER this must be set to the id of the vhost_worker + * to free. + */ + unsigned int worker_id; +}; + +struct vhost_vring_worker { + /* vring index */ + unsigned int index; + /* The id of the vhost_worker returned from VHOST_NEW_WORKER */ + unsigned int worker_id; +}; + /* no alignment requirement */ struct vhost_iotlb_msg { __u64 iova; @@ -165,5 +181,9 @@ struct vhost_vdpa_iova_range { #define VHOST_BACKEND_F_SUSPEND 0x4 /* Device can be resumed */ #define VHOST_BACKEND_F_RESUME 0x5 +/* Device supports the driver enabling virtqueues both before and after + * DRIVER_OK + */ +#define VHOST_BACKEND_F_ENABLE_AFTER_DRIVER_OK 0x6 #endif diff --git a/include/uapi/linux/videodev2.h b/include/uapi/linux/videodev2.h index 17a9b975177a..78260e5d9985 100644 --- a/include/uapi/linux/videodev2.h +++ b/include/uapi/linux/videodev2.h @@ -580,12 +580,17 @@ struct v4l2_pix_format { #define V4L2_PIX_FMT_RGBA1010102 v4l2_fourcc('R', 'A', '3', '0') /* 32 RGBA-10-10-10-2 */ #define V4L2_PIX_FMT_ARGB2101010 v4l2_fourcc('A', 'R', '3', '0') /* 32 ARGB-2-10-10-10 */ +/* RGB formats (6 or 8 bytes per pixel) */ +#define V4L2_PIX_FMT_BGR48_12 v4l2_fourcc('B', '3', '1', '2') /* 48 BGR 12-bit per component */ +#define V4L2_PIX_FMT_ABGR64_12 v4l2_fourcc('B', '4', '1', '2') /* 64 BGRA 12-bit per component */ + /* Grey formats */ #define V4L2_PIX_FMT_GREY v4l2_fourcc('G', 'R', 'E', 'Y') /* 8 Greyscale */ #define V4L2_PIX_FMT_Y4 v4l2_fourcc('Y', '0', '4', ' ') /* 4 Greyscale */ #define V4L2_PIX_FMT_Y6 v4l2_fourcc('Y', '0', '6', ' ') /* 6 Greyscale */ #define V4L2_PIX_FMT_Y10 v4l2_fourcc('Y', '1', '0', ' ') /* 10 Greyscale */ #define V4L2_PIX_FMT_Y12 v4l2_fourcc('Y', '1', '2', ' ') /* 12 Greyscale */ +#define V4L2_PIX_FMT_Y012 v4l2_fourcc('Y', '0', '1', '2') /* 12 Greyscale */ #define V4L2_PIX_FMT_Y14 v4l2_fourcc('Y', '1', '4', ' ') /* 14 Greyscale */ #define V4L2_PIX_FMT_Y16 v4l2_fourcc('Y', '1', '6', ' ') /* 16 Greyscale */ #define V4L2_PIX_FMT_Y16_BE v4l2_fourcc_be('Y', '1', '6', ' ') /* 16 Greyscale BE */ @@ -620,6 +625,7 @@ struct v4l2_pix_format { #define V4L2_PIX_FMT_YUVA32 v4l2_fourcc('Y', 'U', 'V', 'A') /* 32 YUVA-8-8-8-8 */ #define V4L2_PIX_FMT_YUVX32 v4l2_fourcc('Y', 'U', 'V', 'X') /* 32 YUVX-8-8-8-8 */ #define V4L2_PIX_FMT_M420 v4l2_fourcc('M', '4', '2', '0') /* 12 YUV 4:2:0 2 lines y, 1 line uv interleaved */ +#define V4L2_PIX_FMT_YUV48_12 v4l2_fourcc('Y', '3', '1', '2') /* 48 YUV 4:4:4 12-bit per component */ /* * YCbCr packed format. For each Y2xx format, xx bits of valid data occupy the MSBs @@ -637,12 +643,14 @@ struct v4l2_pix_format { #define V4L2_PIX_FMT_NV24 v4l2_fourcc('N', 'V', '2', '4') /* 24 Y/CbCr 4:4:4 */ #define V4L2_PIX_FMT_NV42 v4l2_fourcc('N', 'V', '4', '2') /* 24 Y/CrCb 4:4:4 */ #define V4L2_PIX_FMT_P010 v4l2_fourcc('P', '0', '1', '0') /* 24 Y/CbCr 4:2:0 10-bit per component */ +#define V4L2_PIX_FMT_P012 v4l2_fourcc('P', '0', '1', '2') /* 24 Y/CbCr 4:2:0 12-bit per component */ /* two non contiguous planes - one Y, one Cr + Cb interleaved */ #define V4L2_PIX_FMT_NV12M v4l2_fourcc('N', 'M', '1', '2') /* 12 Y/CbCr 4:2:0 */ #define V4L2_PIX_FMT_NV21M v4l2_fourcc('N', 'M', '2', '1') /* 21 Y/CrCb 4:2:0 */ #define V4L2_PIX_FMT_NV16M v4l2_fourcc('N', 'M', '1', '6') /* 16 Y/CbCr 4:2:2 */ #define V4L2_PIX_FMT_NV61M v4l2_fourcc('N', 'M', '6', '1') /* 16 Y/CrCb 4:2:2 */ +#define V4L2_PIX_FMT_P012M v4l2_fourcc('P', 'M', '1', '2') /* 24 Y/CbCr 4:2:0 12-bit per component */ /* three planes - Y Cb, Cr */ #define V4L2_PIX_FMT_YUV410 v4l2_fourcc('Y', 'U', 'V', '9') /* 9 YUV 4:1:0 */ @@ -664,6 +672,7 @@ struct v4l2_pix_format { #define V4L2_PIX_FMT_NV12_4L4 v4l2_fourcc('V', 'T', '1', '2') /* 12 Y/CbCr 4:2:0 4x4 tiles */ #define V4L2_PIX_FMT_NV12_16L16 v4l2_fourcc('H', 'M', '1', '2') /* 12 Y/CbCr 4:2:0 16x16 tiles */ #define V4L2_PIX_FMT_NV12_32L32 v4l2_fourcc('S', 'T', '1', '2') /* 12 Y/CbCr 4:2:0 32x32 tiles */ +#define V4L2_PIX_FMT_NV15_4L4 v4l2_fourcc('V', 'T', '1', '5') /* 15 Y/CbCr 4:2:0 10-bit 4x4 tiles */ #define V4L2_PIX_FMT_P010_4L4 v4l2_fourcc('T', '0', '1', '0') /* 12 Y/CbCr 4:2:0 10-bit 4x4 macroblocks */ #define V4L2_PIX_FMT_NV12_8L128 v4l2_fourcc('A', 'T', '1', '2') /* Y/CbCr 4:2:0 8x128 tiles */ #define V4L2_PIX_FMT_NV12_10BE_8L128 v4l2_fourcc_be('A', 'X', '1', '2') /* Y/CbCr 4:2:0 10-bit 8x128 tiles */ @@ -750,6 +759,10 @@ struct v4l2_pix_format { #define V4L2_PIX_FMT_FWHT_STATELESS v4l2_fourcc('S', 'F', 'W', 'H') /* Stateless FWHT (vicodec) */ #define V4L2_PIX_FMT_H264_SLICE v4l2_fourcc('S', '2', '6', '4') /* H264 parsed slices */ #define V4L2_PIX_FMT_HEVC_SLICE v4l2_fourcc('S', '2', '6', '5') /* HEVC parsed slices */ +#define V4L2_PIX_FMT_AV1_FRAME v4l2_fourcc('A', 'V', '1', 'F') /* AV1 parsed frame */ +#define V4L2_PIX_FMT_SPK v4l2_fourcc('S', 'P', 'K', '0') /* Sorenson Spark */ +#define V4L2_PIX_FMT_RV30 v4l2_fourcc('R', 'V', '3', '0') /* RealVideo 8 */ +#define V4L2_PIX_FMT_RV40 v4l2_fourcc('R', 'V', '4', '0') /* RealVideo 9 & 10 */ /* Vendor-specific formats */ #define V4L2_PIX_FMT_CPIA1 v4l2_fourcc('C', 'P', 'I', 'A') /* cpia1 YUV */ @@ -783,6 +796,8 @@ struct v4l2_pix_format { #define V4L2_PIX_FMT_Z16 v4l2_fourcc('Z', '1', '6', ' ') /* Depth data 16-bit */ #define V4L2_PIX_FMT_MT21C v4l2_fourcc('M', 'T', '2', '1') /* Mediatek compressed block mode */ #define V4L2_PIX_FMT_MM21 v4l2_fourcc('M', 'M', '2', '1') /* Mediatek 8-bit block mode, two non-contiguous planes */ +#define V4L2_PIX_FMT_MT2110T v4l2_fourcc('M', 'T', '2', 'T') /* Mediatek 10-bit block tile mode */ +#define V4L2_PIX_FMT_MT2110R v4l2_fourcc('M', 'T', '2', 'R') /* Mediatek 10-bit block raster mode */ #define V4L2_PIX_FMT_INZI v4l2_fourcc('I', 'N', 'Z', 'I') /* Intel Planar Greyscale 10-bit and Depth 16-bit */ #define V4L2_PIX_FMT_CNF4 v4l2_fourcc('C', 'N', 'F', '4') /* Intel 4-bit packed depth confidence information */ #define V4L2_PIX_FMT_HI240 v4l2_fourcc('H', 'I', '2', '4') /* BTTV 8-bit dithered RGB */ @@ -1224,8 +1239,10 @@ struct v4l2_framebuffer { /* Flags for the 'capability' field. Read only */ #define V4L2_FBUF_CAP_EXTERNOVERLAY 0x0001 #define V4L2_FBUF_CAP_CHROMAKEY 0x0002 +#ifndef __KERNEL__ #define V4L2_FBUF_CAP_LIST_CLIPPING 0x0004 #define V4L2_FBUF_CAP_BITMAP_CLIPPING 0x0008 +#endif #define V4L2_FBUF_CAP_LOCAL_ALPHA 0x0010 #define V4L2_FBUF_CAP_GLOBAL_ALPHA 0x0020 #define V4L2_FBUF_CAP_LOCAL_INV_ALPHA 0x0040 @@ -1707,7 +1724,7 @@ struct v4l2_input { __u8 name[32]; /* Label */ __u32 type; /* Type of input */ __u32 audioset; /* Associated audios (bitfield) */ - __u32 tuner; /* enum v4l2_tuner_type */ + __u32 tuner; /* Tuner index */ v4l2_std_id std; __u32 status; __u32 capabilities; @@ -1794,8 +1811,8 @@ struct v4l2_ext_control { __u8 __user *p_u8; __u16 __user *p_u16; __u32 __user *p_u32; - __u32 __user *p_s32; - __u32 __user *p_s64; + __s32 __user *p_s32; + __s64 __user *p_s64; struct v4l2_area __user *p_area; struct v4l2_ctrl_h264_sps __user *p_h264_sps; struct v4l2_ctrl_h264_pps *p_h264_pps; @@ -1815,6 +1832,10 @@ struct v4l2_ext_control { struct v4l2_ctrl_hevc_slice_params __user *p_hevc_slice_params; struct v4l2_ctrl_hevc_scaling_matrix __user *p_hevc_scaling_matrix; struct v4l2_ctrl_hevc_decode_params __user *p_hevc_decode_params; + struct v4l2_ctrl_av1_sequence __user *p_av1_sequence; + struct v4l2_ctrl_av1_tile_group_entry __user *p_av1_tile_group_entry; + struct v4l2_ctrl_av1_frame __user *p_av1_frame; + struct v4l2_ctrl_av1_film_grain __user *p_av1_film_grain; void __user *ptr; }; } __attribute__ ((packed)); @@ -1888,6 +1909,11 @@ enum v4l2_ctrl_type { V4L2_CTRL_TYPE_HEVC_SLICE_PARAMS = 0x0272, V4L2_CTRL_TYPE_HEVC_SCALING_MATRIX = 0x0273, V4L2_CTRL_TYPE_HEVC_DECODE_PARAMS = 0x0274, + + V4L2_CTRL_TYPE_AV1_SEQUENCE = 0x280, + V4L2_CTRL_TYPE_AV1_TILE_GROUP_ENTRY = 0x281, + V4L2_CTRL_TYPE_AV1_FRAME = 0x282, + V4L2_CTRL_TYPE_AV1_FILM_GRAIN = 0x283, }; /* Used in the VIDIOC_QUERYCTRL ioctl for querying controls */ diff --git a/include/uapi/linux/virtio_config.h b/include/uapi/linux/virtio_config.h index 3c05162bc988..2c712c654165 100644 --- a/include/uapi/linux/virtio_config.h +++ b/include/uapi/linux/virtio_config.h @@ -100,6 +100,12 @@ #define VIRTIO_F_SR_IOV 37 /* + * This feature indicates that the driver passes extra data (besides + * identifying the virtqueue) in its device notifications. + */ +#define VIRTIO_F_NOTIFICATION_DATA 38 + +/* * This feature indicates that the driver can reset a queue individually. */ #define VIRTIO_F_RING_RESET 40 diff --git a/include/uapi/linux/virtio_net.h b/include/uapi/linux/virtio_net.h index b4062bed186a..cc65ef0f3c3e 100644 --- a/include/uapi/linux/virtio_net.h +++ b/include/uapi/linux/virtio_net.h @@ -56,11 +56,13 @@ #define VIRTIO_NET_F_MQ 22 /* Device supports Receive Flow * Steering */ #define VIRTIO_NET_F_CTRL_MAC_ADDR 23 /* Set MAC address */ +#define VIRTIO_NET_F_VQ_NOTF_COAL 52 /* Device supports virtqueue notification coalescing */ #define VIRTIO_NET_F_NOTF_COAL 53 /* Device supports notifications coalescing */ #define VIRTIO_NET_F_GUEST_USO4 54 /* Guest can handle USOv4 in. */ #define VIRTIO_NET_F_GUEST_USO6 55 /* Guest can handle USOv6 in. */ #define VIRTIO_NET_F_HOST_USO 56 /* Host can handle USO in. */ #define VIRTIO_NET_F_HASH_REPORT 57 /* Supports hash report */ +#define VIRTIO_NET_F_GUEST_HDRLEN 59 /* Guest provides the exact hdr_len value. */ #define VIRTIO_NET_F_RSS 60 /* Supports RSS RX steering */ #define VIRTIO_NET_F_RSC_EXT 61 /* extended coalescing info */ #define VIRTIO_NET_F_STANDBY 62 /* Act as standby for another device @@ -390,5 +392,18 @@ struct virtio_net_ctrl_coal_rx { }; #define VIRTIO_NET_CTRL_NOTF_COAL_RX_SET 1 +#define VIRTIO_NET_CTRL_NOTF_COAL_VQ_SET 2 +#define VIRTIO_NET_CTRL_NOTF_COAL_VQ_GET 3 + +struct virtio_net_ctrl_coal { + __le32 max_packets; + __le32 max_usecs; +}; + +struct virtio_net_ctrl_coal_vq { + __le16 vqn; + __le16 reserved; + struct virtio_net_ctrl_coal coal; +}; #endif /* _UAPI_LINUX_VIRTIO_NET_H */ diff --git a/include/uapi/linux/wireless.h b/include/uapi/linux/wireless.h index 08967b3f19c8..3c2ad5fae17f 100644 --- a/include/uapi/linux/wireless.h +++ b/include/uapi/linux/wireless.h @@ -835,7 +835,7 @@ struct iw_encode_ext { * individual keys */ __u16 alg; /* IW_ENCODE_ALG_* */ __u16 key_len; - __u8 key[0]; + __u8 key[]; }; /* SIOCSIWMLME data */ diff --git a/include/uapi/rdma/bnxt_re-abi.h b/include/uapi/rdma/bnxt_re-abi.h index b1de99bf56ce..6e7c67a0cca3 100644 --- a/include/uapi/rdma/bnxt_re-abi.h +++ b/include/uapi/rdma/bnxt_re-abi.h @@ -41,6 +41,7 @@ #define __BNXT_RE_UVERBS_ABI_H__ #include <linux/types.h> +#include <rdma/ib_user_ioctl_cmds.h> #define BNXT_RE_ABI_VERSION 1 @@ -51,6 +52,8 @@ enum { BNXT_RE_UCNTX_CMASK_HAVE_CCTX = 0x1ULL, BNXT_RE_UCNTX_CMASK_HAVE_MODE = 0x02ULL, + BNXT_RE_UCNTX_CMASK_WC_DPI_ENABLED = 0x04ULL, + BNXT_RE_UCNTX_CMASK_DBR_PACING_ENABLED = 0x08ULL, }; enum bnxt_re_wqe_mode { @@ -96,6 +99,10 @@ struct bnxt_re_cq_resp { __u32 rsvd; }; +struct bnxt_re_resize_cq_req { + __aligned_u64 cq_va; +}; + struct bnxt_re_qp_req { __aligned_u64 qpsva; __aligned_u64 qprva; @@ -123,4 +130,35 @@ enum bnxt_re_shpg_offt { BNXT_RE_END_RESV_OFFT = 0xFF0 }; +enum bnxt_re_objects { + BNXT_RE_OBJECT_ALLOC_PAGE = (1U << UVERBS_ID_NS_SHIFT), + BNXT_RE_OBJECT_NOTIFY_DRV, +}; + +enum bnxt_re_alloc_page_type { + BNXT_RE_ALLOC_WC_PAGE = 0, + BNXT_RE_ALLOC_DBR_BAR_PAGE, + BNXT_RE_ALLOC_DBR_PAGE, +}; + +enum bnxt_re_var_alloc_page_attrs { + BNXT_RE_ALLOC_PAGE_HANDLE = (1U << UVERBS_ID_NS_SHIFT), + BNXT_RE_ALLOC_PAGE_TYPE, + BNXT_RE_ALLOC_PAGE_DPI, + BNXT_RE_ALLOC_PAGE_MMAP_OFFSET, + BNXT_RE_ALLOC_PAGE_MMAP_LENGTH, +}; + +enum bnxt_re_alloc_page_attrs { + BNXT_RE_DESTROY_PAGE_HANDLE = (1U << UVERBS_ID_NS_SHIFT), +}; + +enum bnxt_re_alloc_page_methods { + BNXT_RE_METHOD_ALLOC_PAGE = (1U << UVERBS_ID_NS_SHIFT), + BNXT_RE_METHOD_DESTROY_PAGE, +}; + +enum bnxt_re_notify_drv_methods { + BNXT_RE_METHOD_NOTIFY_DRV = (1U << UVERBS_ID_NS_SHIFT), +}; #endif /* __BNXT_RE_UVERBS_ABI_H__*/ diff --git a/include/uapi/rdma/efa-abi.h b/include/uapi/rdma/efa-abi.h index 163ac79556d6..d94c32f28804 100644 --- a/include/uapi/rdma/efa-abi.h +++ b/include/uapi/rdma/efa-abi.h @@ -1,6 +1,6 @@ /* SPDX-License-Identifier: ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) */ /* - * Copyright 2018-2022 Amazon.com, Inc. or its affiliates. All rights reserved. + * Copyright 2018-2023 Amazon.com, Inc. or its affiliates. All rights reserved. */ #ifndef EFA_ABI_USER_H @@ -120,6 +120,8 @@ enum { EFA_QUERY_DEVICE_CAPS_RNR_RETRY = 1 << 1, EFA_QUERY_DEVICE_CAPS_CQ_NOTIFICATIONS = 1 << 2, EFA_QUERY_DEVICE_CAPS_CQ_WITH_SGID = 1 << 3, + EFA_QUERY_DEVICE_CAPS_DATA_POLLING_128 = 1 << 4, + EFA_QUERY_DEVICE_CAPS_RDMA_WRITE = 1 << 5, }; struct efa_ibv_ex_query_device_resp { diff --git a/include/uapi/rdma/irdma-abi.h b/include/uapi/rdma/irdma-abi.h index a7085e092d34..bb18f15489e3 100644 --- a/include/uapi/rdma/irdma-abi.h +++ b/include/uapi/rdma/irdma-abi.h @@ -22,10 +22,16 @@ enum irdma_memreg_type { IRDMA_MEMREG_TYPE_CQ = 2, }; +enum { + IRDMA_ALLOC_UCTX_USE_RAW_ATTR = 1 << 0, + IRDMA_ALLOC_UCTX_MIN_HW_WQ_SIZE = 1 << 1, +}; + struct irdma_alloc_ucontext_req { __u32 rsvd32; __u8 userspace_ver; __u8 rsvd8[3]; + __aligned_u64 comp_mask; }; struct irdma_alloc_ucontext_resp { @@ -46,6 +52,9 @@ struct irdma_alloc_ucontext_resp { __u16 max_hw_sq_chunk; __u8 hw_rev; __u8 rsvd2; + __aligned_u64 comp_mask; + __u16 min_hw_wq_size; + __u8 rsvd3[6]; }; struct irdma_alloc_pd_resp { diff --git a/include/uapi/scsi/scsi_bsg_ufs.h b/include/uapi/scsi/scsi_bsg_ufs.h index 2801b65299aa..7c7975f9905e 100644 --- a/include/uapi/scsi/scsi_bsg_ufs.h +++ b/include/uapi/scsi/scsi_bsg_ufs.h @@ -8,6 +8,7 @@ #ifndef SCSI_BSG_UFS_H #define SCSI_BSG_UFS_H +#include <asm/byteorder.h> #include <linux/types.h> /* * This file intended to be included by both kernel and user space @@ -40,11 +41,56 @@ enum ufs_rpmb_op_type { * @dword_0: UPIU header DW-0 * @dword_1: UPIU header DW-1 * @dword_2: UPIU header DW-2 + * + * @transaction_code: Type of request or response. See also enum + * upiu_request_transaction and enum upiu_response_transaction. + * @flags: UPIU flags. The meaning of individual flags depends on the + * transaction code. + * @lun: Logical unit number. + * @task_tag: Task tag. + * @iid: Initiator ID. + * @command_set_type: 0 for SCSI command set; 1 for UFS specific. + * @tm_function: Task management function in case of a task management request + * UPIU. + * @query_function: Query function in case of a query request UPIU. + * @response: 0 for success; 1 for failure. + * @status: SCSI status if this is the header of a response to a SCSI command. + * @ehs_length: EHS length in units of 32 bytes. + * @device_information: + * @data_segment_length: data segment length. */ struct utp_upiu_header { - __be32 dword_0; - __be32 dword_1; - __be32 dword_2; + union { + struct { + __be32 dword_0; + __be32 dword_1; + __be32 dword_2; + }; + struct { + __u8 transaction_code; + __u8 flags; + __u8 lun; + __u8 task_tag; +#if defined(__BIG_ENDIAN) + __u8 iid: 4; + __u8 command_set_type: 4; +#elif defined(__LITTLE_ENDIAN) + __u8 command_set_type: 4; + __u8 iid: 4; +#else +#error +#endif + union { + __u8 tm_function; + __u8 query_function; + }; + __u8 response; + __u8 status; + __u8 ehs_length; + __u8 device_information; + __be16 data_segment_length; + }; + }; }; /** @@ -71,6 +117,31 @@ struct utp_upiu_query { }; /** + * struct utp_upiu_query_v4_0 - upiu request buffer structure for + * query request >= UFS 4.0 spec. + * @opcode: command to perform B-0 + * @idn: a value that indicates the particular type of data B-1 + * @index: Index to further identify data B-2 + * @selector: Index to further identify data B-3 + * @osf4: spec field B-5 + * @osf5: spec field B 6,7 + * @osf6: spec field DW 8,9 + * @osf7: spec field DW 10,11 + */ +struct utp_upiu_query_v4_0 { + __u8 opcode; + __u8 idn; + __u8 index; + __u8 selector; + __u8 osf3; + __u8 osf4; + __be16 osf5; + __be32 osf6; + __be32 osf7; + __be32 reserved; +}; + +/** * struct utp_upiu_cmd - Command UPIU structure * @data_transfer_len: Data Transfer Length DW-3 * @cdb: Command Descriptor Block CDB DW-4 to DW-7 diff --git a/include/uapi/sound/asequencer.h b/include/uapi/sound/asequencer.h index 00d2703e8fca..b5bc8604efe8 100644 --- a/include/uapi/sound/asequencer.h +++ b/include/uapi/sound/asequencer.h @@ -10,7 +10,7 @@ #include <sound/asound.h> /** version of the sequencer */ -#define SNDRV_SEQ_VERSION SNDRV_PROTOCOL_VERSION(1, 0, 2) +#define SNDRV_SEQ_VERSION SNDRV_PROTOCOL_VERSION(1, 0, 3) /** * definition of sequencer event types @@ -174,6 +174,7 @@ struct snd_seq_connect { #define SNDRV_SEQ_PRIORITY_HIGH (1<<4) /* event should be processed before others */ #define SNDRV_SEQ_PRIORITY_MASK (1<<4) +#define SNDRV_SEQ_EVENT_UMP (1<<5) /* event holds a UMP packet */ /* note event */ struct snd_seq_ev_note { @@ -252,6 +253,19 @@ struct snd_seq_ev_quote { struct snd_seq_event *event; /* quoted event */ } __attribute__((packed)); +union snd_seq_event_data { /* event data... */ + struct snd_seq_ev_note note; + struct snd_seq_ev_ctrl control; + struct snd_seq_ev_raw8 raw8; + struct snd_seq_ev_raw32 raw32; + struct snd_seq_ev_ext ext; + struct snd_seq_ev_queue_control queue; + union snd_seq_timestamp time; + struct snd_seq_addr addr; + struct snd_seq_connect connect; + struct snd_seq_result result; + struct snd_seq_ev_quote quote; +}; /* sequencer event */ struct snd_seq_event { @@ -262,25 +276,27 @@ struct snd_seq_event { unsigned char queue; /* schedule queue */ union snd_seq_timestamp time; /* schedule time */ - struct snd_seq_addr source; /* source address */ struct snd_seq_addr dest; /* destination address */ - union { /* event data... */ - struct snd_seq_ev_note note; - struct snd_seq_ev_ctrl control; - struct snd_seq_ev_raw8 raw8; - struct snd_seq_ev_raw32 raw32; - struct snd_seq_ev_ext ext; - struct snd_seq_ev_queue_control queue; - union snd_seq_timestamp time; - struct snd_seq_addr addr; - struct snd_seq_connect connect; - struct snd_seq_result result; - struct snd_seq_ev_quote quote; - } data; + union snd_seq_event_data data; }; + /* (compatible) event for UMP-capable clients */ +struct snd_seq_ump_event { + snd_seq_event_type_t type; /* event type */ + unsigned char flags; /* event flags */ + char tag; + unsigned char queue; /* schedule queue */ + union snd_seq_timestamp time; /* schedule time */ + struct snd_seq_addr source; /* source address */ + struct snd_seq_addr dest; /* destination address */ + + union { + union snd_seq_event_data data; + unsigned int ump[4]; + }; +}; /* * bounce event - stored as variable size data @@ -331,6 +347,7 @@ typedef int __bitwise snd_seq_client_type_t; #define SNDRV_SEQ_FILTER_BROADCAST (1U<<0) /* accept broadcast messages */ #define SNDRV_SEQ_FILTER_MULTICAST (1U<<1) /* accept multicast messages */ #define SNDRV_SEQ_FILTER_BOUNCE (1U<<2) /* accept bounce event in error */ +#define SNDRV_SEQ_FILTER_NO_CONVERT (1U<<30) /* don't convert UMP events */ #define SNDRV_SEQ_FILTER_USE_EVENT (1U<<31) /* use event filter */ struct snd_seq_client_info { @@ -344,9 +361,18 @@ struct snd_seq_client_info { int event_lost; /* number of lost events */ int card; /* RO: card number[kernel] */ int pid; /* RO: pid[user] */ - char reserved[56]; /* for future use */ + unsigned int midi_version; /* MIDI version */ + unsigned int group_filter; /* UMP group filter bitmap + * (bit 0 = groupless messages, + * bit 1-16 = messages for groups 1-16) + */ + char reserved[48]; /* for future use */ }; +/* MIDI version numbers in client info */ +#define SNDRV_SEQ_CLIENT_LEGACY_MIDI 0 /* Legacy client */ +#define SNDRV_SEQ_CLIENT_UMP_MIDI_1_0 1 /* UMP MIDI 1.0 */ +#define SNDRV_SEQ_CLIENT_UMP_MIDI_2_0 2 /* UMP MIDI 2.0 */ /* client pool size */ struct snd_seq_client_pool { @@ -406,6 +432,8 @@ struct snd_seq_remove_events { #define SNDRV_SEQ_PORT_CAP_SUBS_READ (1<<5) /* allow read subscription */ #define SNDRV_SEQ_PORT_CAP_SUBS_WRITE (1<<6) /* allow write subscription */ #define SNDRV_SEQ_PORT_CAP_NO_EXPORT (1<<7) /* routing not allowed */ +#define SNDRV_SEQ_PORT_CAP_INACTIVE (1<<8) /* inactive port */ +#define SNDRV_SEQ_PORT_CAP_UMP_ENDPOINT (1<<9) /* MIDI 2.0 UMP Endpoint port */ /* port type */ #define SNDRV_SEQ_PORT_TYPE_SPECIFIC (1<<0) /* hardware specific */ @@ -415,6 +443,7 @@ struct snd_seq_remove_events { #define SNDRV_SEQ_PORT_TYPE_MIDI_XG (1<<4) /* XG compatible device */ #define SNDRV_SEQ_PORT_TYPE_MIDI_MT32 (1<<5) /* MT-32 compatible device */ #define SNDRV_SEQ_PORT_TYPE_MIDI_GM2 (1<<6) /* General MIDI 2 compatible device */ +#define SNDRV_SEQ_PORT_TYPE_MIDI_UMP (1<<7) /* UMP */ /* other standards...*/ #define SNDRV_SEQ_PORT_TYPE_SYNTH (1<<10) /* Synth device (no MIDI compatible - direct wavetable) */ @@ -432,6 +461,12 @@ struct snd_seq_remove_events { #define SNDRV_SEQ_PORT_FLG_TIMESTAMP (1<<1) #define SNDRV_SEQ_PORT_FLG_TIME_REAL (1<<2) +/* port direction */ +#define SNDRV_SEQ_PORT_DIR_UNKNOWN 0 +#define SNDRV_SEQ_PORT_DIR_INPUT 1 +#define SNDRV_SEQ_PORT_DIR_OUTPUT 2 +#define SNDRV_SEQ_PORT_DIR_BIDIRECTION 3 + struct snd_seq_port_info { struct snd_seq_addr addr; /* client/port numbers */ char name[64]; /* port name */ @@ -448,7 +483,9 @@ struct snd_seq_port_info { void *kernel; /* reserved for kernel use (must be NULL) */ unsigned int flags; /* misc. conditioning */ unsigned char time_queue; /* queue # for timestamping */ - char reserved[59]; /* for future use */ + unsigned char direction; /* port usage direction (r/w/bidir) */ + unsigned char ump_group; /* 0 = UMP EP (no conversion), 1-16 = UMP group number */ + char reserved[57]; /* for future use */ }; @@ -552,6 +589,18 @@ struct snd_seq_query_subs { char reserved[64]; /* for future use */ }; +/* + * UMP-specific information + */ +/* type of UMP info query */ +#define SNDRV_SEQ_CLIENT_UMP_INFO_ENDPOINT 0 +#define SNDRV_SEQ_CLIENT_UMP_INFO_BLOCK 1 + +struct snd_seq_client_ump_info { + int client; /* client number to inquire/set */ + int type; /* type to inquire/set */ + unsigned char info[512]; /* info (either UMP ep or block info) */ +} __packed; /* * IOCTL commands @@ -561,9 +610,12 @@ struct snd_seq_query_subs { #define SNDRV_SEQ_IOCTL_CLIENT_ID _IOR ('S', 0x01, int) #define SNDRV_SEQ_IOCTL_SYSTEM_INFO _IOWR('S', 0x02, struct snd_seq_system_info) #define SNDRV_SEQ_IOCTL_RUNNING_MODE _IOWR('S', 0x03, struct snd_seq_running_info) +#define SNDRV_SEQ_IOCTL_USER_PVERSION _IOW('S', 0x04, int) #define SNDRV_SEQ_IOCTL_GET_CLIENT_INFO _IOWR('S', 0x10, struct snd_seq_client_info) #define SNDRV_SEQ_IOCTL_SET_CLIENT_INFO _IOW ('S', 0x11, struct snd_seq_client_info) +#define SNDRV_SEQ_IOCTL_GET_CLIENT_UMP_INFO _IOWR('S', 0x12, struct snd_seq_client_ump_info) +#define SNDRV_SEQ_IOCTL_SET_CLIENT_UMP_INFO _IOWR('S', 0x13, struct snd_seq_client_ump_info) #define SNDRV_SEQ_IOCTL_CREATE_PORT _IOWR('S', 0x20, struct snd_seq_port_info) #define SNDRV_SEQ_IOCTL_DELETE_PORT _IOW ('S', 0x21, struct snd_seq_port_info) diff --git a/include/uapi/sound/asoc.h b/include/uapi/sound/asoc.h index 9f35bedafcff..10851bca7174 100644 --- a/include/uapi/sound/asoc.h +++ b/include/uapi/sound/asoc.h @@ -222,9 +222,9 @@ struct snd_soc_tplg_vendor_array { __le32 type; /* SND_SOC_TPLG_TUPLE_TYPE_ */ __le32 num_elems; /* number of elements in array */ union { - struct snd_soc_tplg_vendor_uuid_elem uuid[0]; - struct snd_soc_tplg_vendor_value_elem value[0]; - struct snd_soc_tplg_vendor_string_elem string[0]; + __DECLARE_FLEX_ARRAY(struct snd_soc_tplg_vendor_uuid_elem, uuid); + __DECLARE_FLEX_ARRAY(struct snd_soc_tplg_vendor_value_elem, value); + __DECLARE_FLEX_ARRAY(struct snd_soc_tplg_vendor_string_elem, string); }; } __attribute__((packed)); diff --git a/include/uapi/sound/asound.h b/include/uapi/sound/asound.h index de6810e94abe..f9939da41122 100644 --- a/include/uapi/sound/asound.h +++ b/include/uapi/sound/asound.h @@ -274,6 +274,7 @@ typedef int __bitwise snd_pcm_subformat_t; #define SNDRV_PCM_INFO_DOUBLE 0x00000004 /* Double buffering needed for PCM start/stop */ #define SNDRV_PCM_INFO_BATCH 0x00000010 /* double buffering */ #define SNDRV_PCM_INFO_SYNC_APPLPTR 0x00000020 /* need the explicit sync of appl_ptr update */ +#define SNDRV_PCM_INFO_PERFECT_DRAIN 0x00000040 /* silencing at the end of stream is not required */ #define SNDRV_PCM_INFO_INTERLEAVED 0x00000100 /* channels are interleaved */ #define SNDRV_PCM_INFO_NONINTERLEAVED 0x00000200 /* channels are not interleaved */ #define SNDRV_PCM_INFO_COMPLEX 0x00000400 /* complex frame organization (mmap only) */ @@ -383,6 +384,9 @@ typedef int snd_pcm_hw_param_t; #define SNDRV_PCM_HW_PARAMS_NORESAMPLE (1<<0) /* avoid rate resampling */ #define SNDRV_PCM_HW_PARAMS_EXPORT_BUFFER (1<<1) /* export buffer */ #define SNDRV_PCM_HW_PARAMS_NO_PERIOD_WAKEUP (1<<2) /* disable period wakeups */ +#define SNDRV_PCM_HW_PARAMS_NO_DRAIN_SILENCE (1<<3) /* suppress drain with the filling + * of the silence samples + */ struct snd_interval { unsigned int min, max; @@ -429,9 +433,14 @@ struct snd_pcm_sw_params { snd_pcm_uframes_t avail_min; /* min avail frames for wakeup */ snd_pcm_uframes_t xfer_align; /* obsolete: xfer size need to be a multiple */ snd_pcm_uframes_t start_threshold; /* min hw_avail frames for automatic start */ - snd_pcm_uframes_t stop_threshold; /* min avail frames for automatic stop */ - snd_pcm_uframes_t silence_threshold; /* min distance from noise for silence filling */ - snd_pcm_uframes_t silence_size; /* silence block size */ + /* + * The following two thresholds alleviate playback buffer underruns; when + * hw_avail drops below the threshold, the respective action is triggered: + */ + snd_pcm_uframes_t stop_threshold; /* - stop playback */ + snd_pcm_uframes_t silence_threshold; /* - pre-fill buffer with silence */ + snd_pcm_uframes_t silence_size; /* max size of silence pre-fill; when >= boundary, + * fill played area with silence immediately */ snd_pcm_uframes_t boundary; /* pointers wrap point */ unsigned int proto; /* protocol version */ unsigned int tstamp_type; /* timestamp type (req. proto >= 2.0.12) */ @@ -570,7 +579,8 @@ struct __snd_pcm_mmap_status64 { struct __snd_pcm_mmap_control64 { __pad_before_uframe __pad1; snd_pcm_uframes_t appl_ptr; /* RW: appl ptr (0...boundary-1) */ - __pad_before_uframe __pad2; + __pad_before_uframe __pad2; // This should be __pad_after_uframe, but binary + // backwards compatibility constraints prevent a fix. __pad_before_uframe __pad3; snd_pcm_uframes_t avail_min; /* RW: min available frames for wakeup */ @@ -702,7 +712,7 @@ enum { * Raw MIDI section - /dev/snd/midi?? */ -#define SNDRV_RAWMIDI_VERSION SNDRV_PROTOCOL_VERSION(2, 0, 2) +#define SNDRV_RAWMIDI_VERSION SNDRV_PROTOCOL_VERSION(2, 0, 4) enum { SNDRV_RAWMIDI_STREAM_OUTPUT = 0, @@ -713,6 +723,7 @@ enum { #define SNDRV_RAWMIDI_INFO_OUTPUT 0x00000001 #define SNDRV_RAWMIDI_INFO_INPUT 0x00000002 #define SNDRV_RAWMIDI_INFO_DUPLEX 0x00000004 +#define SNDRV_RAWMIDI_INFO_UMP 0x00000008 struct snd_rawmidi_info { unsigned int device; /* RO/WR (control): device number */ @@ -773,6 +784,72 @@ struct snd_rawmidi_status { }; #endif +/* UMP EP info flags */ +#define SNDRV_UMP_EP_INFO_STATIC_BLOCKS 0x01 + +/* UMP EP Protocol / JRTS capability bits */ +#define SNDRV_UMP_EP_INFO_PROTO_MIDI_MASK 0x0300 +#define SNDRV_UMP_EP_INFO_PROTO_MIDI1 0x0100 /* MIDI 1.0 */ +#define SNDRV_UMP_EP_INFO_PROTO_MIDI2 0x0200 /* MIDI 2.0 */ +#define SNDRV_UMP_EP_INFO_PROTO_JRTS_MASK 0x0003 +#define SNDRV_UMP_EP_INFO_PROTO_JRTS_TX 0x0001 /* JRTS Transmit */ +#define SNDRV_UMP_EP_INFO_PROTO_JRTS_RX 0x0002 /* JRTS Receive */ + +/* UMP Endpoint information */ +struct snd_ump_endpoint_info { + int card; /* card number */ + int device; /* device number */ + unsigned int flags; /* additional info */ + unsigned int protocol_caps; /* protocol capabilities */ + unsigned int protocol; /* current protocol */ + unsigned int num_blocks; /* # of function blocks */ + unsigned short version; /* UMP major/minor version */ + unsigned short family_id; /* MIDI device family ID */ + unsigned short model_id; /* MIDI family model ID */ + unsigned int manufacturer_id; /* MIDI manufacturer ID */ + unsigned char sw_revision[4]; /* software revision */ + unsigned short padding; + unsigned char name[128]; /* endpoint name string */ + unsigned char product_id[128]; /* unique product id string */ + unsigned char reserved[32]; +} __packed; + +/* UMP direction */ +#define SNDRV_UMP_DIR_INPUT 0x01 +#define SNDRV_UMP_DIR_OUTPUT 0x02 +#define SNDRV_UMP_DIR_BIDIRECTION 0x03 + +/* UMP block info flags */ +#define SNDRV_UMP_BLOCK_IS_MIDI1 (1U << 0) /* MIDI 1.0 port w/o restrict */ +#define SNDRV_UMP_BLOCK_IS_LOWSPEED (1U << 1) /* 31.25Kbps B/W MIDI1 port */ + +/* UMP block user-interface hint */ +#define SNDRV_UMP_BLOCK_UI_HINT_UNKNOWN 0x00 +#define SNDRV_UMP_BLOCK_UI_HINT_RECEIVER 0x01 +#define SNDRV_UMP_BLOCK_UI_HINT_SENDER 0x02 +#define SNDRV_UMP_BLOCK_UI_HINT_BOTH 0x03 + +/* UMP groups and blocks */ +#define SNDRV_UMP_MAX_GROUPS 16 +#define SNDRV_UMP_MAX_BLOCKS 32 + +/* UMP Block information */ +struct snd_ump_block_info { + int card; /* card number */ + int device; /* device number */ + unsigned char block_id; /* block ID (R/W) */ + unsigned char direction; /* UMP direction */ + unsigned char active; /* Activeness */ + unsigned char first_group; /* first group ID */ + unsigned char num_groups; /* number of groups */ + unsigned char midi_ci_version; /* MIDI-CI support version */ + unsigned char sysex8_streams; /* max number of sysex8 streams */ + unsigned char ui_hint; /* user interface hint */ + unsigned int flags; /* various info flags */ + unsigned char name[128]; /* block name string */ + unsigned char reserved[32]; +} __packed; + #define SNDRV_RAWMIDI_IOCTL_PVERSION _IOR('W', 0x00, int) #define SNDRV_RAWMIDI_IOCTL_INFO _IOR('W', 0x01, struct snd_rawmidi_info) #define SNDRV_RAWMIDI_IOCTL_USER_PVERSION _IOW('W', 0x02, int) @@ -780,6 +857,9 @@ struct snd_rawmidi_status { #define SNDRV_RAWMIDI_IOCTL_STATUS _IOWR('W', 0x20, struct snd_rawmidi_status) #define SNDRV_RAWMIDI_IOCTL_DROP _IOW('W', 0x30, int) #define SNDRV_RAWMIDI_IOCTL_DRAIN _IOW('W', 0x31, int) +/* Additional ioctls for UMP rawmidi devices */ +#define SNDRV_UMP_IOCTL_ENDPOINT_INFO _IOR('W', 0x40, struct snd_ump_endpoint_info) +#define SNDRV_UMP_IOCTL_BLOCK_INFO _IOR('W', 0x41, struct snd_ump_block_info) /* * Timer section - /dev/snd/timer @@ -955,7 +1035,7 @@ struct snd_timer_tread { * * ****************************************************************************/ -#define SNDRV_CTL_VERSION SNDRV_PROTOCOL_VERSION(2, 0, 8) +#define SNDRV_CTL_VERSION SNDRV_PROTOCOL_VERSION(2, 0, 9) struct snd_ctl_card_info { int card; /* card number */ @@ -1116,6 +1196,9 @@ struct snd_ctl_tlv { #define SNDRV_CTL_IOCTL_RAWMIDI_NEXT_DEVICE _IOWR('U', 0x40, int) #define SNDRV_CTL_IOCTL_RAWMIDI_INFO _IOWR('U', 0x41, struct snd_rawmidi_info) #define SNDRV_CTL_IOCTL_RAWMIDI_PREFER_SUBDEVICE _IOW('U', 0x42, int) +#define SNDRV_CTL_IOCTL_UMP_NEXT_DEVICE _IOWR('U', 0x43, int) +#define SNDRV_CTL_IOCTL_UMP_ENDPOINT_INFO _IOWR('U', 0x44, struct snd_ump_endpoint_info) +#define SNDRV_CTL_IOCTL_UMP_BLOCK_INFO _IOWR('U', 0x45, struct snd_ump_block_info) #define SNDRV_CTL_IOCTL_POWER _IOWR('U', 0xd0, int) #define SNDRV_CTL_IOCTL_POWER_STATE _IOR('U', 0xd1, int) diff --git a/include/uapi/sound/emu10k1.h b/include/uapi/sound/emu10k1.h index 1c1f1dd44611..4c32a116e7ad 100644 --- a/include/uapi/sound/emu10k1.h +++ b/include/uapi/sound/emu10k1.h @@ -15,9 +15,6 @@ * ---- FX8010 ---- */ -#define EMU10K1_CARD_CREATIVE 0x00000000 -#define EMU10K1_CARD_EMUAPS 0x00000001 - #define EMU10K1_FX8010_PCM_COUNT 8 /* @@ -46,6 +43,19 @@ #define iINTERP 0x0e /* R = A + (X * (Y - A) >> 31) ; saturation */ #define iSKIP 0x0f /* R = A (cc_reg), X (count), Y (cc_test) */ +#define LOWORD_OPX_MASK 0x000ffc00 /* Instruction operand X */ +#define LOWORD_OPY_MASK 0x000003ff /* Instruction operand Y */ +#define HIWORD_OPCODE_MASK 0x00f00000 /* Instruction opcode */ +#define HIWORD_RESULT_MASK 0x000ffc00 /* Instruction result */ +#define HIWORD_OPA_MASK 0x000003ff /* Instruction operand A */ + +/* Audigy Soundcards have a different instruction format */ +#define A_LOWORD_OPX_MASK 0x007ff000 +#define A_LOWORD_OPY_MASK 0x000007ff +#define A_HIWORD_OPCODE_MASK 0x0f000000 +#define A_HIWORD_RESULT_MASK 0x007ff000 +#define A_HIWORD_OPA_MASK 0x000007ff + /* GPRs */ #define FXBUS(x) (0x00 + (x)) /* x = 0x00 - 0x0f */ #define EXTIN(x) (0x10 + (x)) /* x = 0x00 - 0x0f */ @@ -53,6 +63,16 @@ #define FXBUS2(x) (0x30 + (x)) /* x = 0x00 - 0x0f copies of fx buses for capture -> FXWC high 16 bits */ /* NB: 0x31 and 0x32 are shared with Center/LFE on SB live 5.1 */ +#define A_FXBUS(x) (0x00 + (x)) /* x = 0x00 - 0x3f FX buses */ +#define A_EXTIN(x) (0x40 + (x)) /* x = 0x00 - 0x0f physical ins */ +#define A_P16VIN(x) (0x50 + (x)) /* x = 0x00 - 0x0f p16v ins (A2 only) "EMU32 inputs" */ +#define A_EXTOUT(x) (0x60 + (x)) /* x = 0x00 - 0x1f physical outs -> A_FXWC1 0x79-7f unknown */ +#define A_FXBUS2(x) (0x80 + (x)) /* x = 0x00 - 0x1f extra outs used for EFX capture -> A_FXWC2 */ +#define A_EMU32OUTH(x) (0xa0 + (x)) /* x = 0x00 - 0x0f "EMU32_OUT_10 - _1F" */ +#define A_EMU32OUTL(x) (0xb0 + (x)) /* x = 0x00 - 0x0f "EMU32_OUT_01 - _0F" */ +#define A3_EMU32IN(x) (0x160 + (x)) /* x = 0x00 - 0x1f "EMU32_IN_00 - _1F" - Only when .device = 0x0008 */ +#define A3_EMU32OUT(x) (0x1E0 + (x)) /* x = 0x00 - 0x1f "EMU32_OUT_00 - _1F" - Only when .device = 0x0008 */ + #define C_00000000 0x40 #define C_00000001 0x41 #define C_00000002 0x42 @@ -81,12 +101,66 @@ #define GPR_NOISE1 0x59 /* noise source */ #define GPR_IRQ 0x5a /* IRQ register */ #define GPR_DBAC 0x5b /* TRAM Delay Base Address Counter */ + +/* Audigy constants */ +#define A_C_00000000 0xc0 +#define A_C_00000001 0xc1 +#define A_C_00000002 0xc2 +#define A_C_00000003 0xc3 +#define A_C_00000004 0xc4 +#define A_C_00000008 0xc5 +#define A_C_00000010 0xc6 +#define A_C_00000020 0xc7 +#define A_C_00000100 0xc8 +#define A_C_00010000 0xc9 +#define A_C_00000800 0xca +#define A_C_10000000 0xcb +#define A_C_20000000 0xcc +#define A_C_40000000 0xcd +#define A_C_80000000 0xce +#define A_C_7fffffff 0xcf +#define A_C_ffffffff 0xd0 +#define A_C_fffffffe 0xd1 +#define A_C_c0000000 0xd2 +#define A_C_4f1bbcdc 0xd3 +#define A_C_5a7ef9db 0xd4 +#define A_C_00100000 0xd5 +#define A_GPR_ACCU 0xd6 /* ACCUM, accumulator */ +#define A_GPR_COND 0xd7 /* CCR, condition register */ +#define A_GPR_NOISE0 0xd8 /* noise source */ +#define A_GPR_NOISE1 0xd9 /* noise source */ +#define A_GPR_IRQ 0xda /* IRQ register */ +#define A_GPR_DBAC 0xdb /* TRAM Delay Base Address Counter - internal */ +#define A_GPR_DBACE 0xde /* TRAM Delay Base Address Counter - external */ + +/* Each FX general purpose register is 32 bits in length, all bits are used */ +#define FXGPREGBASE 0x100 /* FX general purpose registers base */ +#define A_FXGPREGBASE 0x400 /* Audigy GPRs, 0x400 to 0x5ff */ + +#define A_TANKMEMCTLREGBASE 0x100 /* Tank memory control registers base - only for Audigy */ +#define A_TANKMEMCTLREG_MASK 0x1f /* only 5 bits used - only for Audigy */ + +/* Tank audio data is logarithmically compressed down to 16 bits before writing to TRAM and is */ +/* decompressed back to 20 bits on a read. There are a total of 160 locations, the last 32 */ +/* locations are for external TRAM. */ +#define TANKMEMDATAREGBASE 0x200 /* Tank memory data registers base */ +#define TANKMEMDATAREG_MASK 0x000fffff /* 20 bit tank audio data field */ + +/* Combined address field and memory opcode or flag field. 160 locations, last 32 are external */ +#define TANKMEMADDRREGBASE 0x300 /* Tank memory address registers base */ +#define TANKMEMADDRREG_ADDR_MASK 0x000fffff /* 20 bit tank address field */ +#define TANKMEMADDRREG_CLEAR 0x00800000 /* Clear tank memory */ +#define TANKMEMADDRREG_ALIGN 0x00400000 /* Align read or write relative to tank access */ +#define TANKMEMADDRREG_WRITE 0x00200000 /* Write to tank memory */ +#define TANKMEMADDRREG_READ 0x00100000 /* Read from tank memory */ + #define GPR(x) (FXGPREGBASE + (x)) /* free GPRs: x = 0x00 - 0xff */ #define ITRAM_DATA(x) (TANKMEMDATAREGBASE + 0x00 + (x)) /* x = 0x00 - 0x7f */ #define ETRAM_DATA(x) (TANKMEMDATAREGBASE + 0x80 + (x)) /* x = 0x00 - 0x1f */ #define ITRAM_ADDR(x) (TANKMEMADDRREGBASE + 0x00 + (x)) /* x = 0x00 - 0x7f */ #define ETRAM_ADDR(x) (TANKMEMADDRREGBASE + 0x80 + (x)) /* x = 0x00 - 0x1f */ +#define A_GPR(x) (A_FXGPREGBASE + (x)) #define A_ITRAM_DATA(x) (TANKMEMDATAREGBASE + 0x00 + (x)) /* x = 0x00 - 0xbf */ #define A_ETRAM_DATA(x) (TANKMEMDATAREGBASE + 0xc0 + (x)) /* x = 0x00 - 0x3f */ #define A_ITRAM_ADDR(x) (TANKMEMADDRREGBASE + 0x00 + (x)) /* x = 0x00 - 0xbf */ @@ -94,17 +168,6 @@ #define A_ITRAM_CTL(x) (A_TANKMEMCTLREGBASE + 0x00 + (x)) /* x = 0x00 - 0xbf */ #define A_ETRAM_CTL(x) (A_TANKMEMCTLREGBASE + 0xc0 + (x)) /* x = 0x00 - 0x3f */ -#define A_FXBUS(x) (0x00 + (x)) /* x = 0x00 - 0x3f FX buses */ -#define A_EXTIN(x) (0x40 + (x)) /* x = 0x00 - 0x0f physical ins */ -#define A_P16VIN(x) (0x50 + (x)) /* x = 0x00 - 0x0f p16v ins (A2 only) "EMU32 inputs" */ -#define A_EXTOUT(x) (0x60 + (x)) /* x = 0x00 - 0x1f physical outs -> A_FXWC1 0x79-7f unknown */ -#define A_FXBUS2(x) (0x80 + (x)) /* x = 0x00 - 0x1f extra outs used for EFX capture -> A_FXWC2 */ -#define A_EMU32OUTH(x) (0xa0 + (x)) /* x = 0x00 - 0x0f "EMU32_OUT_10 - _1F" - ??? */ -#define A_EMU32OUTL(x) (0xb0 + (x)) /* x = 0x00 - 0x0f "EMU32_OUT_1 - _F" - ??? */ -#define A3_EMU32IN(x) (0x160 + (x)) /* x = 0x00 - 0x3f "EMU32_IN_00 - _3F" - Only when .device = 0x0008 */ -#define A3_EMU32OUT(x) (0x1E0 + (x)) /* x = 0x00 - 0x0f "EMU32_OUT_00 - _3F" - Only when .device = 0x0008 */ -#define A_GPR(x) (A_FXGPREGBASE + (x)) - /* cc_reg constants */ #define CC_REG_NORMALIZED C_00000001 #define CC_REG_BORROW C_00000002 @@ -113,7 +176,17 @@ #define CC_REG_SATURATE C_00000010 #define CC_REG_NONZERO C_00000100 +#define A_CC_REG_NORMALIZED A_C_00000001 +#define A_CC_REG_BORROW A_C_00000002 +#define A_CC_REG_MINUS A_C_00000004 +#define A_CC_REG_ZERO A_C_00000008 +#define A_CC_REG_SATURATE A_C_00000010 +#define A_CC_REG_NONZERO A_C_00000100 + /* FX buses */ +// These are arbitrary mappings; our DSP code simply expects +// the config files to route the channels this way. +// The numbers are documented in {audigy,sb-live}-mixer.rst. #define FXBUS_PCM_LEFT 0x00 #define FXBUS_PCM_RIGHT 0x01 #define FXBUS_PCM_LEFT_REAR 0x02 @@ -203,38 +276,7 @@ #define A_EXTOUT_ADC_CAP_R 0x17 /* right */ #define A_EXTOUT_MIC_CAP 0x18 /* Mic capture buffer */ -/* Audigy constants */ -#define A_C_00000000 0xc0 -#define A_C_00000001 0xc1 -#define A_C_00000002 0xc2 -#define A_C_00000003 0xc3 -#define A_C_00000004 0xc4 -#define A_C_00000008 0xc5 -#define A_C_00000010 0xc6 -#define A_C_00000020 0xc7 -#define A_C_00000100 0xc8 -#define A_C_00010000 0xc9 -#define A_C_00000800 0xca -#define A_C_10000000 0xcb -#define A_C_20000000 0xcc -#define A_C_40000000 0xcd -#define A_C_80000000 0xce -#define A_C_7fffffff 0xcf -#define A_C_ffffffff 0xd0 -#define A_C_fffffffe 0xd1 -#define A_C_c0000000 0xd2 -#define A_C_4f1bbcdc 0xd3 -#define A_C_5a7ef9db 0xd4 -#define A_C_00100000 0xd5 -#define A_GPR_ACCU 0xd6 /* ACCUM, accumulator */ -#define A_GPR_COND 0xd7 /* CCR, condition register */ -#define A_GPR_NOISE0 0xd8 /* noise source */ -#define A_GPR_NOISE1 0xd9 /* noise source */ -#define A_GPR_IRQ 0xda /* IRQ register */ -#define A_GPR_DBAC 0xdb /* TRAM Delay Base Address Counter - internal */ -#define A_GPR_DBACE 0xde /* TRAM Delay Base Address Counter - external */ - -/* definitions for debug register */ +/* Definitions for debug register. Note that these are for emu10k1 ONLY. */ #define EMU10K1_DBG_ZC 0x80000000 /* zero tram counter */ #define EMU10K1_DBG_SATURATION_OCCURED 0x02000000 /* saturation control */ #define EMU10K1_DBG_SATURATION_ADDR 0x01ff0000 /* saturation address */ @@ -243,14 +285,14 @@ #define EMU10K1_DBG_CONDITION_CODE 0x00003e00 /* condition code */ #define EMU10K1_DBG_SINGLE_STEP_ADDR 0x000001ff /* single step address */ -/* tank memory address line */ -#ifndef __KERNEL__ -#define TANKMEMADDRREG_ADDR_MASK 0x000fffff /* 20 bit tank address field */ -#define TANKMEMADDRREG_CLEAR 0x00800000 /* Clear tank memory */ -#define TANKMEMADDRREG_ALIGN 0x00400000 /* Align read or write relative to tank access */ -#define TANKMEMADDRREG_WRITE 0x00200000 /* Write to tank memory */ -#define TANKMEMADDRREG_READ 0x00100000 /* Read from tank memory */ -#endif +/* Definitions for emu10k2 debug register. */ +#define A_DBG_ZC 0x40000000 /* zero tram counter */ +#define A_DBG_SATURATION_OCCURED 0x20000000 +#define A_DBG_SATURATION_ADDR 0x0ffc0000 +#define A_DBG_SINGLE_STEP 0x00020000 /* Set to zero to start dsp */ +#define A_DBG_STEP 0x00010000 +#define A_DBG_CONDITION_CODE 0x0000f800 +#define A_DBG_STEP_ADDR 0x000003ff struct snd_emu10k1_fx8010_info { unsigned int internal_tram_size; /* in samples */ @@ -266,6 +308,8 @@ struct snd_emu10k1_fx8010_info { #define EMU10K1_GPR_TRANSLATION_BASS 2 #define EMU10K1_GPR_TRANSLATION_TREBLE 3 #define EMU10K1_GPR_TRANSLATION_ONOFF 4 +#define EMU10K1_GPR_TRANSLATION_NEGATE 5 +#define EMU10K1_GPR_TRANSLATION_NEG_TABLE100 6 enum emu10k1_ctl_elem_iface { EMU10K1_CTL_ELEM_IFACE_MIXER = 2, /* virtual mixer device */ @@ -286,9 +330,9 @@ struct snd_emu10k1_fx8010_control_gpr { unsigned int vcount; /* visible count */ unsigned int count; /* count of GPR (1..16) */ unsigned short gpr[32]; /* GPR number(s) */ - unsigned int value[32]; /* initial values */ - unsigned int min; /* minimum range */ - unsigned int max; /* maximum range */ + int value[32]; /* initial values */ + int min; /* minimum range */ + int max; /* maximum range */ unsigned int translation; /* translation type (EMU10K1_GPR_TRANSLATION*) */ const unsigned int *tlv; }; diff --git a/include/uapi/sound/skl-tplg-interface.h b/include/uapi/sound/skl-tplg-interface.h index f29899b179a6..4bf9c4f9add8 100644 --- a/include/uapi/sound/skl-tplg-interface.h +++ b/include/uapi/sound/skl-tplg-interface.h @@ -66,7 +66,8 @@ enum skl_ch_cfg { SKL_CH_CFG_DUAL_MONO = 9, SKL_CH_CFG_I2S_DUAL_STEREO_0 = 10, SKL_CH_CFG_I2S_DUAL_STEREO_1 = 11, - SKL_CH_CFG_4_CHANNEL = 12, + SKL_CH_CFG_7_1 = 12, + SKL_CH_CFG_4_CHANNEL = SKL_CH_CFG_7_1, SKL_CH_CFG_INVALID }; diff --git a/include/uapi/sound/sof/abi.h b/include/uapi/sound/sof/abi.h index 3566630ca965..45c657c3919e 100644 --- a/include/uapi/sound/sof/abi.h +++ b/include/uapi/sound/sof/abi.h @@ -60,5 +60,7 @@ /* SOF ABI magic number "SOF\0". */ #define SOF_ABI_MAGIC 0x00464F53 +/* SOF IPC4 ABI magic number "SOF4". */ +#define SOF_IPC4_ABI_MAGIC 0x34464F53 #endif diff --git a/include/uapi/sound/sof/header.h b/include/uapi/sound/sof/header.h index e9bba93a5399..cb3c1ace69e3 100644 --- a/include/uapi/sound/sof/header.h +++ b/include/uapi/sound/sof/header.h @@ -11,19 +11,30 @@ #include <linux/types.h> -/* - * Header for all non IPC ABI data. +/** + * struct sof_abi_hdr - Header for all non IPC ABI data. + * @magic: Magic number for validation + * for IPC3 data: 0x00464F53 ('S', 'O', 'F', '\0') + * for IPC4 data: 0x34464F53 ('S', 'O', 'F', '4') + * @type: module specific parameter + * for IPC3: Component specific type + * for IPC4: parameter ID (param_id) of the data + * @size: The size in bytes of the data, excluding this struct + * @abi: SOF ABI version. The version is valid in scope of the 'magic', IPC3 and + * IPC4 ABI version numbers have no relationship. + * @reserved: Reserved for future use + * @data: Component data - opaque to core * * Identifies data type, size and ABI. * Used by any bespoke component data structures or binary blobs. */ struct sof_abi_hdr { - __u32 magic; /**< 'S', 'O', 'F', '\0' */ - __u32 type; /**< component specific type */ - __u32 size; /**< size in bytes of data excl. this struct */ - __u32 abi; /**< SOF ABI version */ - __u32 reserved[4]; /**< reserved for future use */ - __u32 data[]; /**< Component data - opaque to core */ + __u32 magic; + __u32 type; + __u32 size; + __u32 abi; + __u32 reserved[4]; + __u32 data[]; } __packed; #define SOF_MANIFEST_DATA_TYPE_NHLT 1 diff --git a/include/uapi/sound/sof/tokens.h b/include/uapi/sound/sof/tokens.h index bacaf8a6317e..453cab2a1209 100644 --- a/include/uapi/sound/sof/tokens.h +++ b/include/uapi/sound/sof/tokens.h @@ -54,6 +54,7 @@ #define SOF_TKN_SCHED_DYNAMIC_PIPELINE 206 #define SOF_TKN_SCHED_LP_MODE 207 #define SOF_TKN_SCHED_MEM_USAGE 208 +#define SOF_TKN_SCHED_USE_CHAIN_DMA 209 /* volume */ #define SOF_TKN_VOLUME_RAMP_STEP_TYPE 250 @@ -88,15 +89,21 @@ #define SOF_TKN_COMP_CPC 406 #define SOF_TKN_COMP_IS_PAGES 409 #define SOF_TKN_COMP_NUM_AUDIO_FORMATS 410 -#define SOF_TKN_COMP_NUM_SINK_PINS 411 -#define SOF_TKN_COMP_NUM_SOURCE_PINS 412 +#define SOF_TKN_COMP_NUM_INPUT_PINS 411 +#define SOF_TKN_COMP_NUM_OUTPUT_PINS 412 /* - * The token for sink/source pin binding, it specifies the widget - * name that the sink/source pin is connected from/to. + * The token for input/output pin binding, it specifies the widget + * name that the input/output pin is connected from/to. */ -#define SOF_TKN_COMP_SINK_PIN_BINDING_WNAME 413 -#define SOF_TKN_COMP_SRC_PIN_BINDING_WNAME 414 - +#define SOF_TKN_COMP_INPUT_PIN_BINDING_WNAME 413 +#define SOF_TKN_COMP_OUTPUT_PIN_BINDING_WNAME 414 +#define SOF_TKN_COMP_NUM_INPUT_AUDIO_FORMATS 415 +#define SOF_TKN_COMP_NUM_OUTPUT_AUDIO_FORMATS 416 +/* + * The token value is copied to the dapm_widget's + * no_wname_in_kcontrol_name. + */ +#define SOF_TKN_COMP_NO_WNAME_IN_KCONTROL_NAME 417 /* SSP */ #define SOF_TKN_INTEL_SSP_CLKS_CONTROL 500 @@ -173,23 +180,25 @@ /* CAVS AUDIO FORMAT */ #define SOF_TKN_CAVS_AUDIO_FORMAT_IN_RATE 1900 #define SOF_TKN_CAVS_AUDIO_FORMAT_IN_BIT_DEPTH 1901 -#define SOF_TKN_CAVS_AUDIO_FORMAT_IN_VALID_BIT 1902 +#define SOF_TKN_CAVS_AUDIO_FORMAT_IN_VALID_BIT_DEPTH 1902 #define SOF_TKN_CAVS_AUDIO_FORMAT_IN_CHANNELS 1903 #define SOF_TKN_CAVS_AUDIO_FORMAT_IN_CH_MAP 1904 #define SOF_TKN_CAVS_AUDIO_FORMAT_IN_CH_CFG 1905 #define SOF_TKN_CAVS_AUDIO_FORMAT_IN_INTERLEAVING_STYLE 1906 #define SOF_TKN_CAVS_AUDIO_FORMAT_IN_FMT_CFG 1907 #define SOF_TKN_CAVS_AUDIO_FORMAT_IN_SAMPLE_TYPE 1908 +#define SOF_TKN_CAVS_AUDIO_FORMAT_INPUT_PIN_INDEX 1909 /* intentional token numbering discontinuity, reserved for future use */ #define SOF_TKN_CAVS_AUDIO_FORMAT_OUT_RATE 1930 #define SOF_TKN_CAVS_AUDIO_FORMAT_OUT_BIT_DEPTH 1931 -#define SOF_TKN_CAVS_AUDIO_FORMAT_OUT_VALID_BIT 1932 +#define SOF_TKN_CAVS_AUDIO_FORMAT_OUT_VALID_BIT_DEPTH 1932 #define SOF_TKN_CAVS_AUDIO_FORMAT_OUT_CHANNELS 1933 #define SOF_TKN_CAVS_AUDIO_FORMAT_OUT_CH_MAP 1934 #define SOF_TKN_CAVS_AUDIO_FORMAT_OUT_CH_CFG 1935 #define SOF_TKN_CAVS_AUDIO_FORMAT_OUT_INTERLEAVING_STYLE 1936 #define SOF_TKN_CAVS_AUDIO_FORMAT_OUT_FMT_CFG 1937 #define SOF_TKN_CAVS_AUDIO_FORMAT_OUT_SAMPLE_TYPE 1938 +#define SOF_TKN_CAVS_AUDIO_FORMAT_OUTPUT_PIN_INDEX 1939 /* intentional token numbering discontinuity, reserved for future use */ #define SOF_TKN_CAVS_AUDIO_FORMAT_IBS 1970 #define SOF_TKN_CAVS_AUDIO_FORMAT_OBS 1971 @@ -197,6 +206,7 @@ /* COPIER */ #define SOF_TKN_INTEL_COPIER_NODE_TYPE 1980 +#define SOF_TKN_INTEL_COPIER_DEEP_BUFFER_DMA_MS 1981 /* ACP I2S */ #define SOF_TKN_AMD_ACPI2S_RATE 1700 diff --git a/include/uapi/xen/evtchn.h b/include/uapi/xen/evtchn.h index 7fbf732f168f..aef2b75f3413 100644 --- a/include/uapi/xen/evtchn.h +++ b/include/uapi/xen/evtchn.h @@ -101,4 +101,13 @@ struct ioctl_evtchn_restrict_domid { domid_t domid; }; +/* + * Bind statically allocated @port. + */ +#define IOCTL_EVTCHN_BIND_STATIC \ + _IOC(_IOC_NONE, 'E', 7, sizeof(struct ioctl_evtchn_bind)) +struct ioctl_evtchn_bind { + unsigned int port; +}; + #endif /* __LINUX_PUBLIC_EVTCHN_H__ */ diff --git a/include/uapi/xen/privcmd.h b/include/uapi/xen/privcmd.h index d2029556083e..375718ba4ab6 100644 --- a/include/uapi/xen/privcmd.h +++ b/include/uapi/xen/privcmd.h @@ -98,6 +98,18 @@ struct privcmd_mmap_resource { __u64 addr; }; +/* For privcmd_irqfd::flags */ +#define PRIVCMD_IRQFD_FLAG_DEASSIGN (1 << 0) + +struct privcmd_irqfd { + void __user *dm_op; + __u32 size; /* Size of structure pointed by dm_op */ + __u32 fd; + __u32 flags; + domid_t dom; + __u8 pad[2]; +}; + /* * @cmd: IOCTL_PRIVCMD_HYPERCALL * @arg: &privcmd_hypercall_t @@ -125,5 +137,7 @@ struct privcmd_mmap_resource { _IOC(_IOC_NONE, 'P', 6, sizeof(domid_t)) #define IOCTL_PRIVCMD_MMAP_RESOURCE \ _IOC(_IOC_NONE, 'P', 7, sizeof(struct privcmd_mmap_resource)) +#define IOCTL_PRIVCMD_IRQFD \ + _IOC(_IOC_NONE, 'P', 8, sizeof(struct privcmd_irqfd)) #endif /* __LINUX_PUBLIC_PRIVCMD_H__ */ |