| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The balance state machine is complex so it's good to verify the
assumptions in helpers, however reset_balance_state() is used
at the end of balance and fs_info::balance_ctl is properly set up before
and protected by the exclusive op ownership in btrfs_balance().
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
btrfs_alloc_reserved_file_extent()
The file extents are normally reserved in subvolume roots but could be
also in the data reloc tree. Change the BUG_ON to assertions as this
verifies the usage assumptions.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The BUG_ON in btrfs_set_buffer_lockdep_class() is a sanity check of the
level which is verified in callers, e.g. when initializing an extent
buffer or reading from an eb header. Change it to an assertion as this
would not happen unless things are really bad and would fail elsewhere
too.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
There's one caller of btrfs_read_roots() and that already uses the
tree_root pointer, it's pointless to BUG_ON on it. As it's an assumption
of the initialization helpers make it an assert instead.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The BUG_ON verifies a condition that should be guaranteed by the correct
use of the path search (with keep_locks and lowest_level set), an
assertion is the suitable check.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The pointer to root is initialized in btrfs_init_delayed_node(), no need
to check for it again. Change the BUG_ON to assertion.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
There's a BUG_ON checking for a valid pointer of fs_info::delayed_root
but it is valid since init_mount_fs_info() and has the same lifetime as
fs_info.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The get_parent handler looks up a parent of a given dentry, this can be
either a subvolume or a directory. The search is set up with offset -1
but it's never expected to find such item, as it would break allowed
range of inode number or a root id. This means it's a corruption (ext4
also returns this error code).
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The check_committed_ref() helper looks up an extent item by a key,
allowing to do an inexact search when key->offset is -1. It's never
expected to find such item, as it would break the allowed range of a
extent item offset.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The unhandled case in btrfs_relocate_sys_chunks() loop is a corruption,
as it could be caused only by two impossible conditions:
- at first the search key is set up to look for a chunk tree item, with
offset -1, this is an inexact search and the key->offset will contain
the correct offset upon a successful search, a valid chunk tree item
cannot have an offset -1
- after first successful search, the found_key corresponds to a chunk
item, the offset is decremented by 1 before the next loop, it's
impossible to find a chunk item there due to alignment and size
constraints
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The btrfs_init_root_free_objectid() looks up a root by a key, allowing
to do an inexact search when key->offset is -1. It's never expected to
find such item, as it would break the allowed range of a root id.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The btrfs_find_root() looks up a root by a key, allowing to do an
inexact search when key->offset is -1. It's never expected to find such
item, as it would break allowed the range of a root id.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We're deleting a root and looking it up by key does not succeed, this
is an inconsistent state and we can't do anything. All callers handle
errors and abort a transaction.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The unlikely case of lookup error in btrfs_remove_block_group() can be
handled properly, in its caller this would lead to a transaction abort.
We can't do anything else, a block group must have been loaded first.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Turn a BUG_ON to a properly handled error and update the error message
in the caller. It is expected that @em_in and @start passed to
btrfs_add_extent_mapping() overlap. Besides tests, the only caller
btrfs_get_extent() makes sure this is true.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The helper btrfs_may_delete() is a copy of generic fs/namei.c:may_delete()
to verify various conditions before deletion. There's a BUG_ON added
before linux.git started, we can turn it to a proper error handling
at least in our local helper. A mistmatch between directory and the
deleted dentry is clearly invalid.
This won't be probably ever hit due to the way how the parameters are
set from the caller btrfs_ioctl_snap_destroy(), using a VFS helper
lookup_one().
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Since we can read/modify the value from the sysfs interface concurrently,
it would be better to protect it from compiler optimizations.
Currently, there is only one read policy BTRFS_READ_POLICY_PID available,
so no actual problem can happen now. This is a preparation for the future
expansion.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
When logging an inode and we require to copy items from subvolume leaves
to the log tree, we clone each subvolume leaf and than use that clone to
copy items to the log tree. This is required to avoid possible deadlocks
as stated in commit 796787c978ef ("btrfs: do not modify log tree while
holding a leaf from fs tree locked").
The cloning requires allocating an extent buffer (struct extent_buffer)
and then allocating pages (folios) to attach to the extent buffer. This
may be slow in case we are under memory pressure, and since we are doing
the cloning while holding a read lock on a subvolume leaf, it means we
can be blocking other operations on that leaf for significant periods of
time, which can increase latency on operations like creating other files,
renaming files, etc. Similarly because we're under a log transaction, we
may also cause extra delay on other tasks doing an fsync, because syncing
the log requires waiting for tasks that joined a log transaction to exit
the transaction.
So to improve this, for any inode logging operation that needs to copy
items from a subvolume leaf ("full sync" or "copy everything" bit set
in the inode), preallocate a dummy extent buffer before locking any
extent buffer from the subvolume tree, and even before joining a log
transaction, add it to the log context and then use it when we need to
copy items from a subvolume leaf to the log tree. This avoids making
other operations get extra latency when waiting to lock a subvolume
leaf that is used during inode logging and we are under heavy memory
pressure.
The following test script with bonnie++ was used to test this:
$ cat test.sh
#!/bin/bash
DEV=/dev/sdh
MNT=/mnt/sdh
MOUNT_OPTIONS="-o ssd"
MEMTOTAL_BYTES=`free -b | grep Mem: | awk '{ print $2 }'`
NR_DIRECTORIES=20
NR_FILES=20480
DATASET_SIZE=$((MEMTOTAL_BYTES * 2 / 1048576))
DIRECTORY_SIZE=$((MEMTOTAL_BYTES * 2 / NR_FILES))
NR_FILES=$((NR_FILES / 1024))
echo "performance" | \
tee /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor
umount $DEV &> /dev/null
mkfs.btrfs -f $MKFS_OPTIONS $DEV
mount $MOUNT_OPTIONS $DEV $MNT
bonnie++ -u root -d $MNT \
-n $NR_FILES:$DIRECTORY_SIZE:$DIRECTORY_SIZE:$NR_DIRECTORIES \
-r 0 -s $DATASET_SIZE -b
umount $MNT
The results of this test on a 8G VM running a non-debug kernel (Debian's
default kernel config), were the following.
Before this change:
Version 2.00a ------Sequential Output------ --Sequential Input- --Random-
-Per Chr- --Block-- -Rewrite- -Per Chr- --Block-- --Seeks--
Name:Size etc /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP
debian0 7501M 376k 99 1.4g 96 117m 14 1510k 99 2.5g 95 +++++ +++
Latency 35068us 24976us 2944ms 30725us 71770us 26152us
Version 2.00a ------Sequential Create------ --------Random Create--------
debian0 -Create-- --Read--- -Delete-- -Create-- --Read--- -Delete--
files:max:min /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP
20:384100:384100/20 20480 32 20480 58 20480 48 20480 39 20480 56 20480 61
Latency 411ms 11914us 119ms 617ms 10296us 110ms
After this change:
Version 2.00a ------Sequential Output------ --Sequential Input- --Random-
-Per Chr- --Block-- -Rewrite- -Per Chr- --Block-- --Seeks--
Name:Size etc /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP
debian0 7501M 375k 99 1.4g 97 117m 14 1546k 99 2.3g 98 +++++ +++
Latency 35975us 20945us 2144ms 10297us 2217us 6004us
Version 2.00a ------Sequential Create------ --------Random Create--------
debian0 -Create-- --Read--- -Delete-- -Create-- --Read--- -Delete--
files:max:min /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP
20:384100:384100/20 20480 35 20480 58 20480 48 20480 40 20480 57 20480 59
Latency 320ms 11237us 77779us 518ms 6470us 86389us
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
At btrfs_delete_unused_bgs(), the use of the list_is_singular() check on
a block group may not be immediately obvious. It is there to prevent
losing raid profile information for a block group type (data, metadata or
system), as that information is removed from
fs_info->avail_[data|metadata|system]_alloc_bits when the last block group
of a given type is deleted. So deleting the block group would later result
in creating block groups of that type with a single profile (because
fs_info->avail_*_alloc_bits would have a value of 0).
This check was added in commit aefbe9a633b5 ("btrfs: Fix lost-data-profile
caused by auto removing bg").
So add a comment mentioning the need for the check.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Add some comments to struct btrfs_fs_info to explicitly document which
members are protected by the spinlock unused_bgs_lock. It is currently
used to protect two linked lists, the reclaim_bgs and unused_bgs lists.
So add an explicit comment on top of each list to mention its protected
by unused_bgs_lock, as well as comment on top of unused_bgs_lock to
mention the lists it protects.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
This helper is used in transaction abort or cleanup context and the
callers cannot handle all errors, only do best effort.
btrfs_cleanup_one_transaction
btrfs_destroy_delayed_refs
btrfs_error_unpin_extent_range
btrfs_destroy_pinned_extent
btrfs_error_unpin_extent_range
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Handle the lookup failure of the block group to unpin, this is a logic
error as the block group must exist at this point. If not, something else
must have freed it, like clean_pinned_extents() would do without locking
the unused_bg_unpin_mutex.
Push the errors to the callers, proper handling will be done in followup
patches.
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We've had numerous attempts to let function unpin_extent_cache() return
void as it only returns 0. There are still error cases to handle so do
that, in addition to the verbose messages. The only caller
btrfs_finish_one_ordered() will now abort the transaction, previously it
let it continue which could lead to further problems.
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
There is a spelling mistake in a warning message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Note: this is a fixed version that was previously reverted as
e01a83e12604 ("Revert "btrfs: zstd: fix and simplify the inline extent
decompression""), with fixed parameters to memzero_page().
[BUG]
If we have a filesystem with 4k sectorsize, and an inlined compressed
extent created like this:
item 4 key (257 INODE_ITEM 0) itemoff 15863 itemsize 160
generation 8 transid 8 size 4096 nbytes 4096
block group 0 mode 100600 links 1 uid 0 gid 0 rdev 0
sequence 1 flags 0x0(none)
item 5 key (257 INODE_REF 256) itemoff 15839 itemsize 24
index 2 namelen 14 name: source_inlined
item 6 key (257 EXTENT_DATA 0) itemoff 15770 itemsize 69
generation 8 type 0 (inline)
inline extent data size 48 ram_bytes 4096 compression 3 (zstd)
Then trying to reflink that extent in an aarch64 system with 64K page
size, the reflink would just fail:
# xfs_io -f -c "reflink $mnt/source_inlined 0 60k 4k" $mnt/dest
XFS_IOC_CLONE_RANGE: Input/output error
[CAUSE]
In zstd_decompress(), we didn't treat @start_byte as just a page offset,
but also use it as an indicator on whether we should error out, without
any proper explanation (this is copied from other decompression code).
In reality, for subpage cases, although @start_byte can be non-zero,
we should never switch input/output buffer nor error out, since the whole
input/output buffer should never exceed one sector, thus we should not
need to do any buffer switch.
Thus the current code using @start_byte as a condition to switch
input/output buffer or finish the decompression is completely incorrect.
[FIX]
The fix involves several modification:
- Rename @start_byte to @dest_pgoff to properly express its meaning
- Use @sectorsize other than PAGE_SIZE to properly initialize the
output buffer size
- Use correct destination offset inside the destination page
- Simplify the main loop
Since the input/output buffer should never switch, we only need one
zstd_decompress_stream() call.
- Consider early end as an error
After the fix, even on 64K page sized aarch64, above reflink now
works as expected:
# xfs_io -f -c "reflink $mnt/source_inlined 0 60k 4k" $mnt/dest
linked 4096/4096 bytes at offset 61440
And results the correct file layout:
item 9 key (258 INODE_ITEM 0) itemoff 15542 itemsize 160
generation 10 transid 10 size 65536 nbytes 4096
block group 0 mode 100600 links 1 uid 0 gid 0 rdev 0
sequence 1 flags 0x0(none)
item 10 key (258 INODE_REF 256) itemoff 15528 itemsize 14
index 3 namelen 4 name: dest
item 11 key (258 XATTR_ITEM 3817753667) itemoff 15445 itemsize 83
location key (0 UNKNOWN.0 0) type XATTR
transid 10 data_len 37 name_len 16
name: security.selinux
data unconfined_u:object_r:unlabeled_t:s0
item 12 key (258 EXTENT_DATA 61440) itemoff 15392 itemsize 53
generation 10 type 1 (regular)
extent data disk byte 13631488 nr 4096
extent data offset 0 nr 4096 ram 4096
extent compression 0 (none)
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
With help of neovim, LSP and clangd we can identify header files that
are not actually needed to be included in the .c files. This is focused
only on removal (with minor fixups), further cleanups are possible but
will require doing the header files properly with forward declarations,
minimized includes and include-what-you-use care.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The block size calculated by i_blocksize from inode is the same as what
we have in fs_info, initalized in inode_init_always(). Unify that to use
the fs_info value everywhere.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The block size stored in the super block is used by subsystems outside
of btrfs and it's a copy of fs_info::sectorsize. Unify that to always
use our sectorsize, with the exception of mount where we first need to
use fixed values (4K) until we read the super block and can set the
sectorsize.
Replace all uses, in most cases it's fewer pointer indirections.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Remove the duplicate physical recording of the original write physical
address in case of a single device write.
This duplicated code is most likely present due to a rebase error.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Convert use of struct page to struct folio inside btrfs_truncate_block().
The only page based function is set_page_extent_mapped(). All other
functions have folio equivalents.
Had to use __filemap_get_folio() because filemap_grab_folio() does not
allow passing allocation mask as a parameter.
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Remove more hidden calls to compound_head() by using an array of folios
instead of pages. Also neaten the error path in defrag_one_range() by
adjusting the length of the array instead of checking for NULL.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Use a folio throughout defrag_prepare_one_page() to remove dozens of
hidden calls to compound_head(). There is no support here for large
folios; indeed, turn the existing check for PageCompound into a check
for large folios.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Turn set_page_extent_mapped() into a wrapper around this version.
Saves a call to compound_head() for callers who already have a folio
and removes a couple of users of page->mapping.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
fstests looks for WARN_ON's in dmesg. Add WARN_ON_ONCE() to our leak
detection code (enabled only in debug builds) so that fstests will fail
if these things trip at all. This will allow us to easily catch
problems with our reference counting that may otherwise go unnoticed.
Reviewed-by: Neal Gompa <neal@gompa.dev>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
There's no need to do a forward declaration of struct extent_map_tree at
extent_io.h, as there are no function prototypes, inline functions or data
structures that refer to struct extent_map_tree.
So remove that forward declaration, which is not needed since commit
477a30ba5f8d ("btrfs: Sink extent_tree arguments in
try_release_extent_mapping").
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
After the conversion to folio interfaces (but without the patch to
enable larger folio allocation), there is an LTP report about observable
performance drop on metadata heavy operations.
https://lore.kernel.org/linux-btrfs/202312221750.571925bd-oliver.sang@intel.com/
This drop is caused by the extra code of calculating the
folio_size()/folio_shift(), instead of the old hard coded
PAGE_SIZE/PAGE_SHIFT.
To slightly reduce the overhead, just cache both folio_size and
folio_shift in extent_buffer.
The two new members (u32 folio_size and u8 folio_shift) are stored
inside the holes of extent_buffer. folio_size is shared with len, which
is reduced to u32. The size of eb does not change.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The variable @bio_offset was introduced in commit 7ffd27e378d2 ("btrfs:
pass bio_offset to check_data_csum() directly"), when we are still using
the same endio function for both data and metadata.
Later we had several changes to data and metadata endio functions:
- Data verification is handled by btrfs bio layer
- Split data and metadata endio paths
Now for data path we no longer do any verification in
end_bbio_data_read(), as the verification is handled by btrfs bio layer
already.
Thus there is no need for such bio_offset variable.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The parameter @pg_offset of btrfs_get_extent() is only utilized for
inlined extent, and we already have an ASSERT() and tree-checker, to
make sure we can only get inline extent at file offset 0.
Any invalid inline extent with non-zero file offset would be rejected by
tree-checker in the first place.
Thus the @pg_offset parameter is not really necessary, just remove it.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
Pull phy fixes from Vinod Koul:
- qcom: m31 pointer err fix, eusb2 fix redundant zero-out loop and v3
offset fix on qmp-usb
- freescale: fix for dphy alias
* tag 'phy-fixes2-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy:
phy: qcom-qmp-usb: fix v3 offsets data
phy: qualcomm: eusb2-repeater: Rework init to drop redundant zero-out loop
phy: qcom: phy-qcom-m31: fix wrong pointer pass to PTR_ERR()
phy: freescale: phy-fsl-imx8-mipi-dphy: Fix alias name to use dashes
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine fixes from Vinod Koul:
- dw-edma fixes to improve driver and remote HDMA setup
- fsl-edma fixes for SoC hange, irq init and byte calculations and
sparse fixes
- idxd: safe user copy of completion record fix
- ptdma: consistent DMA mask fix
* tag 'dmaengine-fix2-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
dmaengine: ptdma: use consistent DMA masks
dmaengine: fsl-qdma: add __iomem and struct in union to fix sparse warning
dmaengine: idxd: Ensure safe user copy of completion record
dmaengine: fsl-edma: correct max_segment_size setting
dmaengine: idxd: Remove shadow Event Log head stored in idxd
dmaengine: fsl-edma: correct calculation of 'nbytes' in multi-fifo scenario
dmaengine: fsl-qdma: init irq after reg initialization
dmaengine: fsl-qdma: fix SoC may hang on 16 byte unaligned read
dmaengine: dw-edma: eDMA: Add sync read before starting the DMA transfer in remote setup
dmaengine: dw-edma: HDMA: Add sync read before starting the DMA transfer in remote setup
dmaengine: dw-edma: Add HDMA remote interrupt configuration
dmaengine: dw-edma: HDMA_V0_REMOTEL_STOP_INT_EN typo fix
dmaengine: dw-edma: Fix wrong interrupt bit set for HDMA
dmaengine: dw-edma: Fix the ch_count hdma callback
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix IOMMU table initialisation when doing kdump over SR-IOV
- Fix incorrect RTAS function name for resetting TCE tables
- Fix fpu_signal selftest failures since a recent change
Thanks to Gaurav Batra and Nathan Lynch.
* tag 'powerpc-6.8-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
selftests/powerpc: Fix fpu_signal failures
powerpc/rtas: use correct function name for resetting TCE tables
powerpc/pseries/iommu: IOMMU table is not initialized for kdump over SR-IOV
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Do not reserve SETUP_RNG_SEED setup data in the e820 map as it should
be used by kexec only
- Make sure MKTME feature detection happens at an earlier time in the
boot process so that the physical address size supported by the CPU
is properly corrected and MTRR masks are programmed properly, leading
to TDX systems booting without disable_mtrr_cleanup on the cmdline
- Make sure the different address sizes supported by the CPU are read
out as early as possible
* tag 'x86_urgent_for_v6.8_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/e820: Don't reserve SETUP_RNG_SEED in e820
x86/cpu/intel: Detect TME keyid bits before setting MTRR mask registers
x86/cpu: Allow reducing x86_phys_bits during early_identify_cpu()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394
Pull firewire fixes from Takashi Sakamoto:
"A workaround to suppress the continuous bus resets in the case that
older devices are connected to the modern 1394 OHCI hardware and
devices
In IEEE 1394 Amendment (IEEE 1394a-2000), the short bus reset is added
to resolve the shortcomings of the long bus reset in IEEE 1394-1995.
However, it is well-known that the solution is not necessarily
effective in the mixing environment that both IEEE 1394-1995 PHY and
IEEE 1394a-2000 (or later) PHY exist, as described in section 8.4.6.2
of IEEE 1394a-2000.
The current implementation of firewire stack schedules the short bus
reset when attempting to resolve the mismatch of gap count in the
certain generation of bus topology. It can cause the continuous bus
reset in the issued environment.
The workaround simply uses the long bus reset instead of the short bus
reset. It is desirable to detect whether the issued environment or
not. However, the way to access PHY registers from remote note is
firstly defined in IEEE 1394a-2000, thus it is not available in the
case"
* tag 'firewire-fixes-6.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
firewire: core: use long bus reset on gap count error
|
|
Pull xfs fix from Chandan Babu:
"Drop experimental warning message when mounting an xfs filesystem on
an fsdax device. We now consider xfs on fsdax to be stable"
* tag 'xfs-6.8-fixes-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: drop experimental warning for FSDAX
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix resource freeing ordering in error path when adding a GPIO chip
- only set pins to output after the reset is complete in gpio-74x164
* tag 'gpio-fixes-for-v6.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: fix resource unwinding order in error path
gpiolib: Fix the error path order in gpiochip_add_data_with_key()
gpio: 74x164: Enable output pins after registers are reset
|
|
In commit 19416123ab3e ("block: define 'struct bvec_iter' as packed"),
what we need is to save the 4byte padding, and avoid `bio` to spread on
one extra cache line.
It is enough to define it as '__packed __aligned(4)', as '__packed'
alone means byte aligned, and can cause compiler to generate horrible
code on architectures that don't support unaligned access in case that
bvec_iter is embedded in other structures.
Cc: Mikulas Patocka <mpatocka@redhat.com>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Fixes: 19416123ab3e ("block: define 'struct bvec_iter' as packed")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Two small fixes, all in drivers (the more obsolete mpt3sas and the
newer mpi3mr)"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: mpt3sas: Prevent sending diag_reset when the controller is ready
scsi: mpi3mr: Reduce stack usage in mpi3mr_refresh_sas_ports()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply fixes from Sebastian Reichel:
- Kconfig dependency fix
- bq27xxx-i2c: do not free non-existing IRQ
* tag 'for-v6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply:
power: supply: bq27xxx-i2c: Do not free non existing IRQ
power: supply: mm8013: select REGMAP_I2C
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd
Pull iommufd fixes from Jason Gunthorpe:
"Four syzkaller found bugs:
- Corruption during error unwind in iommufd_access_change_ioas()
- Overlapping IDs in the test suite due to out of order destruction
- Missing locking for access->ioas in the test suite
- False failures in the test suite validation logic with huge pages"
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd:
iommufd/selftest: Don't check map/unmap pairing with HUGE_PAGES
iommufd: Fix protection fault in iommufd_test_syz_conv_iova
iommufd/selftest: Fix mock_dev_num bug
iommufd: Fix iopt_access_list_id overwrite bug
|
David Sterba
Naohiro Aota
Filipe Manana
Colin Ian King
Qu Wenruo
Johannes Thumshirn
Goldwyn Rodrigues
Matthew Wilcox (Oracle)
Josef Bacik
Linus Torvalds
Ming Lei
