| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into soc/dt
Devicetree changes for omaps for v6.9 merge window
Few device tree warning fixes, updates to use https links, and
add system-power-controller property for omap4-panda and
omap4-epson-embt2ws.
* tag 'omap-for-v6.9/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: omap4-panda-common: Enable powering off the device
ARM: dts: omap-embt2ws: system-power-controller for bt200
ARM: dts: omap: Switch over to https:// url
ARM: dts: ti: omap: add missing abb_{mpu,ivahd,dspeve,gpu} unit addresses for dra7 SoC
ARM: dts: ti: omap: add missing sys_32k_ck unit address for dra7 SoC
ARM: dts: ti: omap: add missing phy_gmii_sel unit address for dra7 SoC
Link: https://lore.kernel.org/r/pull-1709102762-376748@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/dt
TI K3 device tree updates for v6.9
New Features across family / New SoCs:
- J722s SoC and board support with OSPI NOR, CPSW ethernet
- Camera capture support on mulitple J7xx SoCs, AM68, AM69 and AM62P SoCs
- Wave5 Encoder/Decoder support for J721s2, J784s4 and AM62P
Generic Cleanups/Fixes:
- Stop spliting single mbox items
- Adds MIT license along with GPL-2.0 for all TI DTS files
- Moves PCIe EP nodes in overlays
- VTM Power domain fixups for J7xx SoCs
- Conversion of mmio mux users to reg-mux where possible
- Drops unnecessary UART pinmuxes on J7xx SoCs
- MMC TAP value updates for AM64/AM62A/AM62P for improved stability
- DSS register space updates for AM65/AM62/AM62A
SoC specific Fixes/Features:
J7200:
- Adds CAN support
- New compatible for J7200 to support IO wakeup
AM62A
- HDMI Display (DSS) support
- Move to simple-bus for main_conf node
- eMMC, additional MMC/SD instance support
AM62
- move to simple-bus for main_conf node
AM654
- IOT2050-SM board support
- IOT2050 DT refractoring.
AM64
- SolidRun AM642 HummingBoard-T support and its DT overlays
- ICSSG Ethernet support and associated peripherals
Board specific fixes/Features:
- Beagle Play MDIO and USB node fixes
- TPM support on k3-am642-phyboard-electra and verdin-am62-mallow
- Phycore-am64 ADC
- PCIe + USB2.0 SERDES and PCIe + USB3.0 SERDES card support
- USB1 support on verdin-am62
* tag 'ti-k3-dt-for-v6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux: (126 commits)
arm64: dts: ti: hummingboard-t: add overlays for m.2 pci-e and usb-3
arm64: dts: add description for solidrun am642 som and evaluation board
dt-bindings: arm: ti: Add bindings for SolidRun AM642 HummingBoard-T
arm64: dts: ti: k3-am62p: Add Wave5 Video Encoder/Decoder Node
arm64: dts: ti: k3-j721s2-main: Add Wave5 Video Encoder/Decoder Node
arm64: dts: ti: k3-j784s4: Add Wave5 Video Encoder/Decoder Node
arm64: dts: ti: k3-am69-sk: Add support for OSPI flash
arm64: dts: ti: k3-am69-sk: Enable CAN interfaces for AM69 SK board
arm64: dts: ti: Enable overlays for SK-AM62P
arm64: dts: ti: k3-am62p: Add nodes for CSI-RX
arm64: dts: ti: k3-am62p: Add DMASS1 for CSI
arm64: dts: ti: k3-am62p: Fix memory ranges for DMSS
arm64: dts: ti: k3-j722s-evm: Enable OSPI NOR support
arm64: dts: ti: k3-j722s-evm: Enable CPSW3G RGMII1
arm64: dts: ti: k3-j784s4-main: Fix mux-reg-masks in serdes_ln_ctrl
arm64: dts: ti: k3-j721e: Fix mux-reg-masks in hbmc_mux
arm64: dts: ti: Add common1 register space for AM62A SoC
arm64: dts: ti: Add common1 register space for AM62x SoC
arm64: dts: ti: Add common1 register space for AM65x SoC
arm64: dts: ti: k3-am642-evm: add overlay for ICSSG1 2nd port
...
Link: https://lore.kernel.org/r/e7e984db-47b9-404a-9471-5d2ed0effe1d@ti.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into soc/dt
Microchip AT91 device tree updates for v6.9
It contains:
- use DMA for DBGU of at91sam9x5ek.dtsi and USART3 of
at91sam9g25-gardena-smart-gateway.dts
- the new SAMA7G54 Curiosity board
- cleanups
* tag 'at91-dt-6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: dts: microchip: sama7g5: add sama7g5 compatible
ARM: dts: microchip: sam9x60: align dmas to the opening '<'
ARM: dts: microchip: sama7g5: align dmas to the opening '<'
ARM: dts: microchip: sama7g54_curiosity: Add initial device tree of the board
ARM: dts: microchip: sama7g5: Add flexcom 10 node
dt-bindings: ARM: at91: Document Microchip SAMA7G54 Curiosity
ARM: dts: microchip: gardena-smart-gateway: Use DMA for USART3
ARM: dts: microchip: at91sam9x5ek: Use DMA for DBGU serial port
Link: https://lore.kernel.org/r/20240226183635.1964704-1-claudiu.beznea@tuxon.dev
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
soc/dt
arm64: ZynqMP DT changes for 6.9
dt-bindings:
- Describe firmware for Versal NET
- Describe all firmware child nodes
- Align versal-fpga node name with dt schema
- Describe k26 rev2 and kv260
DTs:
- Align firmware node with dt schema
- Add an optee node
- Describe reset for CANs
- Update ECAM size to discover up to 256 buses
- Describe assigned-clocks for uarts
- Add u-boot node
- Comment SMMU entries
- Align dwc3 nodes with dt schema
- Rename i2c groups to match dt schema
- Small DT updates (comments)
- Fix default clock frequency for si570 (zcu102, zcu106)
- Add output-enable pins and cover MIO38 (SOM)
* tag 'zynqmp-dt-for-6.9' of https://github.com/Xilinx/linux-xlnx: (21 commits)
dt-bindings: firmware: xilinx: Describe soc-nvmem subnode
dt-bindings: soc: xilinx: Add support for KV260 CC
dt-bindings: soc: xilinx: Add support for K26 rev2 SOMs
arm64: zynqmp: Align usb clock nodes with binding
arm64: zynqmp: Comment all smmu entries
arm64: zynqmp: Rename i2c?-gpio to i2c?-gpio-grp
arm64: zynqmp: Disable Tri-state for MIO38 Pin
arm64: zynqmp: Remove incorrect comment from kv260s
arm64: zynqmp: Introduce u-boot options node with bootscr-address
arm64: zynqmp: Fix comment to be aligned with board name.
arm64: zynqmp: Update ECAM size to discover up to 256 buses
arm64: zynqmp: Describe assigned-clocks for uarts
arm64: zynqmp: Setup default si570 frequency to 156.25MHz
arm64: zynqmp: Add resets property for CAN nodes
arm64: zynqmp: Add an OP-TEE node to the device tree
arm64: zynqmp: Add output-enable pins to SOMs
arm64: zynqmp: Rename zynqmp-power node to power-management
dt-bindings: firmware: xilinx: Sort node names (clock-controller)
dt-bindings: firmware: xilinx: Describe missing child nodes
dt-bindings: firmware: xilinx: Fix versal-fpga node name
...
Link: https://lore.kernel.org/r/CAHTX3dLEoFMTGg1Q4+OuOwWYd8N73YBTXki8Vvj3cGHUpLJ0=A@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into soc/dt
Add PowerVR Series5 SGX GPUs for the TI SoCs
With the Imagination Rogue GPU binding added, let's also add the devicetree
binding for earlier SGX GPUs. Let's also patch the TI SoCs for the related
SGX GPU nodes.
Based on the mailing list discussions, the conclusion was that we need two
separate device tree bindings, one for Rogue and upcoming GPUS, and one for
the older SGX GPUs.
For merging the changes, I applied the binding changes together with the
TI SoC related changes into a branch leaving out the sun6i and mips changes
as suggested by Rob.
These changes are mostly 32-bit SoCs, but also contains one arm64 change.
It does not cause any merge conflicts.
* tag 'sgx-for-v6.9-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
arm64: dts: ti: k3-am654-main: Add device tree entry for SGX GPU
ARM: dts: DRA7xx: Add device tree entry for SGX GPU
ARM: dts: AM437x: Add device tree entry for SGX GPU
ARM: dts: AM33xx: Add device tree entry for SGX GPU
ARM: dts: omap5: Add device tree entry for SGX GPU
ARM: dts: omap4: Add device tree entry for SGX GPU
ARM: dts: omap3: Add device tree entry for SGX GPU
dt-bindings: gpu: Add PowerVR Series5 SGX GPUs
dt-bindings: gpu: Rename img,powervr to img,powervr-rogue
Link: https://lore.kernel.org/r/pull-1708943489-872615@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt
i.MX arm64 device tree for 6.9:
- New board support: Apalis eval v1.2 carrier board, Variscite
VAR-SOM-MX93, phyBOARD-Segin-i.MX93.
- A series from Adam Ford to enable bluetooth, configure multiple queues
on eqos, remove unnecessary clock configuration for i.MX8 Beacon boards.
- Several changesets from Alexander Stein to add i.MX8DXP support, enable
audio and GPU for i.MX8QXP, re-parent MEDIA_MIPI_PHY1_REF clock for
i.MX8MP, and improve MBA8xx board description.
- A few dt-schema fixes from Fabio Estevam for i.MX8MM and i.MX93 devices.
- A bunch of changes from Frank Li to improve i.MX8QM and i.MX8DXL
support, correcting edma3 power-domains and interrupt numbers, adding
I2C, FlexCAN and SMMU devices, etc.
- A series from Frieder Schrempf to improve imx8mm-kontron board
descriptions, disabling pulls, fixing up RTC device, adding EEPROM,
and refactoring OSM-S module, etc.
- A set of Data Modul i.MX8M Plus eDM SBC improvements from Marek Vasut.
- A series from Shengjiu Wang to add PDM micphone and SPDIF sound card
support for imx8mm-evk board.
- A series of imx8mm-venice boards improvement from Tim Harvey to add
TPM device, fix USB OTG VBUS etc.
- Other small and random improvements on various boards.
* tag 'imx-dt64-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (77 commits)
arm64: dts: imx8mm-kontron-bl-osm-s: Fix Ethernet PHY compatible
arm64: dts: imx8-apalis-v1.1: Remove reset-names from ethernet-phy
arm64: dts: imx8mp-evk: Fix hdmi@3d node
arm64: dts: imx93-var-som: Remove phy-supply from eqos
arm64: dts: imx8mp-phyboard-pollux: Disable pull-up for CD GPIO
arm64: dts: imx8mp-phyboard-pollux: Reduce drive strength for eqos tx lines
arm64: dts: imx8mp-phyboard-pollux: Set debug uart muxing to 0x140
arm64: dts: imx8mp-phyboard-pollux: Add and update rtc devicetree node
arm64: dts: imx8mm-evk: Add spdif sound card support
arm64: dts: mba8xx: Add missing #interrupt-cells
arm64: dts: imx8mp: Set SPI NOR to max 40 MHz on Data Modul i.MX8M Plus eDM SBC
arm64: dts: imx8mn: tqma8mqnl-mba8mx: Add USB DR overlay
arm64: dts: imx8mq: tqma8mq-mba8mx: Add missing USB vbus supply
arm64: dts: freescale: imx8mm/imx8mq: mba8mx: Use PCIe clock generator
arm64: dts: imx8mn-beacon: Remove unnecessary clock configuration
arm64: dts: imx8mn: Slow default video_pll clock rate
arm64: dts: imx8mp-beacon: Configure multiple queues on eqos
arm64: dts: imx8mp-beacon: Enable Bluetooth
arm64: dts: freescale: minor whitespace cleanup
arm64: dts: lx2160a: Fix DTS for full PL011 UART
...
Link: https://lore.kernel.org/r/20240226034147.233993-4-shawnguo2@yeah.net
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt
i.MX ARM device tree for 6.9:
- New board support: Sielaff i.MX6 Solo, Apalis Evaluation Board v1.2.
- A bunch of i.MX7 TQMA7/MBA7 updates from Alexander Stein that add
various devices, improve hardware descriptions and fix dt-schema
warnings, etc.
- Correct touchscreen rotation for imx6sl-tolino-shine2hd board.
- An imx53-qsb update from Dmitry Baryshkov to add HDMI expander support.
- A couple of i.MX1 and i.MX28 device node name fixes from Fabio Estevam.
- Enable usb3-lpm-capable for LS1021A usb3 node.
- A couple of imx6dl-yapp4 board improvements from Michal Vokáč.
- A series from Sebastian Reichel to improve imx6ull descriptions.
* tag 'imx-dt-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (43 commits)
ARM: dts: nxp: imx: fix weim node name
ARM: dts: nxp: imx6ul: fix touchscreen node name
ARM: dts: nxp: imx6ul: xnur-gpio -> xnur-gpios
ARM: dts: imx6ul: Remove fsl,anatop from usbotg1
ARM: dts: imx6ull: fix pinctrl node name
ARM: dts: imx1-apf9328: Fix Ethernet node name
ARM: dts: imx28-evk: Use 'eeprom' as the node name
ARM: dts: ls1021a: Enable usb3-lpm-capable for usb3 node
ARM: dts: imx6dl-yapp4: Move the internal switch PHYs under the switch node
ARM: dts: imx6dl-yapp4: Fix typo in the QCA switch register address
ARM: dts: imx6ul: Set macaddress location in ocotp
ARM: dts: imx53-qsb: add support for the HDMI expander
ARM: dts: imx6ull-dhcom: Remove /omit-if-no-ref/ from node usdhc1-pwrseq
ARM: dts: imx: Add support for Apalis Evaluation Board v1.2
ARM: dts: imx6: skov: add aliases for all ethernet nodes
ARM: dts: imx6qdl-hummingboard: Add rtc0 and rtc1 aliases to fix hctosys
ARM: dts: imx6dl: Add support for Sielaff i.MX6 Solo board
ARM: dts: imx6ul: Add missing #thermal-sensor-cells to tempmon
ARM: dts: imx6sl-tolino-shine2hd: fix touchscreen rotation
ARM: dts: imx6ull-dhcor: Remove 900MHz operating point
...
Link: https://lore.kernel.org/r/20240226034147.233993-3-shawnguo2@yeah.net
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt
i.MX dt-bindings for 6.9:
- New compatibles for boards: TQMa8Xx, Sielaff i.MX6 Solo, Toradex Apalis
imx6q-eval-v1.2, VAR-SOM-MX93, phyBOARD-Segin-i.MX93, UNI-T UTi260B.
- Add vendor prefix for UNI-T.
* tag 'imx-bindings-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
dt-bindings: arm: add UNI-T UTi260B
dt-bindings: vendor-prefixes: add UNI-T
dt-bindings: arm: fsl: remove redundant company name
dt-bindings: arm: fsl: add imx8qm apalis eval v1.2 carrier board
dt-bindings: arm: fsl: Add toradex,apalis_imx6q-eval-v1.2 board
dt-bindings: arm: fsl: Add phyBOARD-Segin-i.MX93
dt-bindings: arm: fsl: Add Sielaff i.MX6 Solo board
dt-bindings: arm: fsl: Add VAR-SOM-MX93 with Symphony
dt-bindings: arm: add TQMa8Xx boards
Link: https://lore.kernel.org/r/20240226034147.233993-2-shawnguo2@yeah.net
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into soc/dt
SoCFPGA DTS updates for v6.9
- Drop the "master" suffix in I3C controller node name
* tag 'socfpga_dts_updates_for_v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
arm64: dts: intel: agilex5: drop "master" I3C node name suffix
Link: https://lore.kernel.org/r/20240226012528.20380-1-dinguyen@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
Qualcomm ARM64 DeviceTree updates for v6.9
Four variants of Samsung Galaxy Core Prime and Grand Prime, built on
MSM8916, and the Hardware Development Kit (HDK) for SM8550, are
introduced.
On X Elite audio and compute remoteprocs, IPCC, PCIe, AOSS QMP, SMP2P,
TCSR, USB, display, audio, and soundwire support is introduced, and
enabled across the CRD and QCP devices.
For SM8650 PCIe controllers are moved to GIC-ITS and msi-map-mask is
defined. Missing qlink-logging reserved-memory region is added for the
modem remoteproc. FastRPC compute contexts are marked dma-coherent.
Audio, USB Type-C and PM8010 support is introduced across MTP and QRD
devices.
GPU cooling devices are hooked up across MSM8916, MSM8939, SC8180X,
SDM630, SDM845, SM6115, SM8150, SM8250, SM8350, and SM8550.
UFS PHY clocks are corrected across MSM8996, MSM8998, SC8180X, SC8280XP,
SDM845, SM6115, SM6125, SM8150, SM8250, SM8350, SM8550, and SM8650.
PCI MSI interrupts are wired up across SM8150, SM8250, SM8350, SM8450,
SM8550, SM8650, SC7280, and SC8180X
On IPQ6018 QUP5 I2C, tsens sand thermal zones are defined. The Inline
Crypto Engine (ICE) is enabled for IPQ9574.
On MSM8953 the GPU and its IOMMU is introduced, the reset for the
display subsystem is also wired up.
VLS CLAMP registers are specified for USB3 PHYs on MSM8998, QCM2290, and
SM6115.
USB Type-C port management is enabled on QRB4210 RB2.
On the SA8295P ADP the MAX20411 regulator powering the GPU rails is
introduced and the GPU is enabled. The first PCI instance on SA8540P
Ride is disabled for now, as a fix for the interrupt storm produced here
has not been presented.
On SA8775P the firmware memory map has changed and is updated. Safety
IRQ is added to the Ethernet controller.
On SC7180 UFS support is introduced and the cros-ec-spi is marked as
wakeup source.
For SC7280 capacity and DPC properties are added, cryptobam definition
is improved to work in more firmware environments, more Chrome-specific
properties are moved out from main dtsi, and cros-ec-spi is maked as a
wakeup source. Slimbus definition is added to the platform.
A missing reserved-memory range is added to Fairphone FP5, PMIC GLINK
and Venus are enabled. LEDs are introduced and voltage settings
corrected on the QCM6490 IDP, and RB3gen2 sees the same voltage changes
and GCC protected clocks are introduced to make the board boot properly.
RPMh sleep stats and a variety of cleanups and fixes are introduced for
SC8180X.
On SC8280XP the additional tsens instances are introduced. Camera
Subsystem and Camera Control Interface (CCI) are added. PMIC die-temp
vadc channels are introduced on the CRD, to allow ADC channels to be
tied to the shared PMIC temp-alarms, to actually report temperature.
On SDM630 USB QMP PHY support is introduced and enabled on the Inforce
IFC6560 board. On the various Sony Xperia XA2 variants WLED is enabled
and configured.
On SM6350 display subsystem interconnects and tsens-based thermal zones
are added. On SM7125 UFS support is added.
On Fairphone FP4, on SM7225, display and GPU are enabled, and firmware
paths are corrected.
SM8150 PCIe controller definitions are corrected.
As with SM8650, the SM8550 the fastrpc compute contexts are marked
dm-coherent, and PCIe controllers are moved to use GIC-ITS. The UFS
controller frequency definition is moved to the generic opp-table.
Touchscreen is enabled on the QRD device.
As usual, a variety of smaller cleanups and corrections to match
DeviceTree bindings and style guidelines are introduced across the
various files.
* tag 'qcom-arm64-for-6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (176 commits)
arm64: dts: qcom: sm6115: fix USB PHY configuration
arm64: dts: sm8650: Add msi-map-mask for PCIe nodes
arm64: dts: qcom: replace underscores in node names
dt-bindings: arm: qcom: Add Samsung Galaxy Tab 4 10.1 LTE
arm64: dts: qcom: pm4125: define USB-C related blocks
arm64: dts: qcom: sa8540p-ride: disable pcie2a node
arm64: dts: qcom: sc7280: add slimbus DT node
arm64: dts: qcom: sc7280: Add capacity and DPC properties
arm64: dts: qcom: pmi632: Add PBS client and use in LPG node
arm64: dts: qcom: sm8550: Use GIC-ITS for PCIe0 and PCIe1
arm64: dts: qcom: sm8150: correct PCIe wake-gpios
arm64: dts: qcom: sdm845-db845c: correct PCIe wake-gpios
arm64: dts: qcom: sm7225-fairphone-fp4: Enable display and GPU
arm64: dts: qcom: sm6350: Remove "disabled" state of GMU
arm64: dts: qcom: msm8916-samsung-fortuna/rossa: Add fuel gauge
arm64: dts: qcom: sm6350: Add interconnect for MDSS
arm64: dts: qcom: msm8916-samsung-fortuna/rossa: Add initial device trees
arm64: dts: qcom: sm8550: Switch UFS from opp-table-hz to opp-v2
arm64: dts: qcom: sc8180x: describe all PCI MSI interrupts
arm64: dts: qcom: minor whitespace cleanup
...
Link: https://lore.kernel.org/r/20240225050146.484422-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/dt
- new H616 peripherals: SPDIF, DMA, THS
- H616 fanout pin configuration
- H6 SPDIF node update
- minor cleanups
- enabled regulator on FETA40i board
- added wifi to Transpeed 8K618-T board
- new boards: Jide Remix Mini PC, Sipeed Longan Module 3H and
Longan Pi 3H
* tag 'sunxi-dt-for-6.9-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: dts: allwinner: h616: Add thermal sensor and zones
ARM: dts: sun8i: Open FETA40i-C regulator aldo1
arm64: dts: allwinner: h616: Add Sipeed Longan SoM 3H and Pi 3H board support
dt-bindings: arm: sunxi: Add Sipeed Longan Module 3H and Longan Pi 3H
arm64: dts: allwinner: h616: minor whitespace cleanup
arm64: dts: allwinner: use capital "OR" for multiple licenses in SPDX
arm64: dts: allwinner: Transpeed 8K618-T: add WiFi nodes
arm64: dts: allwinner: h616: Add 32K fanout pin
arm64: dts: allwinner: Add Jide Remix Mini PC support
dt-bindings: arm: sunxi: document Remix Mini PC name
dt-bindings: vendor-prefixes: add Jide
arm64: dts: allwinner: h616: Add SPDIF device node
arm64: dts: allwinner: h616: Add DMA controller and DMA channels
arm64: dts: allwinner: h6: Add RX DMA channel for SPDIF
dt-bindings: sram: narrow regex for unit address to hex numbers
arm64: dts: allwinner: h616: Add Orange Pi Zero 2W to Makefile
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt
arm64: tegra: Device tree changes for v6.9-rc1
This set of changes refactors the audio-related device tree nodes on
Tegra234 and improves USB support for Jetson AGX Xavier. Furthermore
this consolidates SD/MMC aliases on Tegra234 and provides correct
configuration data for the MGBE Ethernet devices found on Tegra234
so that they can operate at full speed.
* tag 'tegra-for-6.9-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: tegra: Remove Jetson Orin NX and Jetson Orin Nano DTSI
arm64: tegra: Add audio support for Jetson Orin NX and Jetson Orin Nano
arm64: tegra: Define missing IO ports
arm64: tegra: Move AHUB ports to SoC DTSI
arm64: tegra: Add USB Type-C controller for Jetson AGX Xavier
arm64: tegra: Add USB device support for Jetson AGX Xavier
arm64: tegra: Add current monitors for Jetson Xavier
arm64: tegra: Add AXI configuration for Tegra234 MGBE
arm64: tegra: Use consistent SD/MMC aliases on Tegra234
arm64: tegra: Enable cros-ec-spi as wake source
Link: https://lore.kernel.org/r/20240223174849.1509465-5-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt
ARM: tegra: Device tree changes for v6.9-rc1
Add support for the LG Optimus 4X HD and LG Optimus VU devices and clean
up some minor issues.
* tag 'tegra-for-6.9-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra: Add device-tree for LG Optimus 4X HD (P880)
ARM: tegra: Add device-tree for LG Optimus Vu (P895)
ARM: tegra: nexus7: Add missing clock binding into sound node
ARM: tegra: Enable cros-ec-spi as wake source
Link: https://lore.kernel.org/r/20240223174849.1509465-4-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt
dt-bindings: Changes for v6.9-rc1
This contains device tree bindings additions for LG Optimus devices as
well as cleanups for the PMC hardware block.
* tag 'tegra-for-6.9-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
dt-bindings: arm: tegra: Add LG Optimus Vu P895 and Optimus 4X P880
dt-bindings: tegra: pmc: Update scratch as an optional aperture
Link: https://lore.kernel.org/r/20240223174849.1509465-3-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
Renesas DTS updates for v6.9 (take two)
- Add pin control, I2C, GPIO, CA76 cluster, Ethernet, SD/MMC, DMA, and
HyperFLASH/QSPI (RPC) support for the R-Car V4M SoC,
- Add I2C EEPROM, Ethernet, eMMC, and QSPI FLASH support for the Gray
Hawk Single development board,
- Fix PCIe power on ULCB development boards equipped with the
Shimafuji Kingfisher extension,
- Add PSCI support for the RZ/G3S SoC,
- Add camera support for the RZ/G2UL SMARC EVK development board,
- Add display support for the RZ/G2L{,C} and RZ/V2L SoCs and SMARC EVK
development boards,
- Miscellaneous fixes and improvements,
* tag 'renesas-dts-for-v6.9-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: (31 commits)
arm64: dts: renesas: rzg2l-smarc: Enable DU and link with DSI
arm64: dts: renesas: r9a07g054: Add DU node
arm64: dts: renesas: r9a07g044: Add DU node
arm64: dts: renesas: gray-hawk-single: Add QSPI FLASH support
arm64: dts: renesas: r8a779h0: Add RPC node
arm64: dts: renesas: r8a779h0: Add DMA support
arm64: dts: renesas: gray-hawk-single: Add eMMC support
arm64: dts: renesas: r8a779h0: Add SD/MMC node
ARM: dts: renesas: r8a7778: Add missing reg-names to sound node
arm64: dts: renesas: rzg2ul-smarc: Enable CRU, CSI support
arm64: dts: renesas: gray-hawk-single: Add Ethernet support
arm64: dts: renesas: r8a779h0: Add Ethernet-AVB support
arm64: dts: renesas: r8a779g0: Correct avb[01] reg sizes
arm64: dts: renesas: r8a779a0: Correct avb[01] reg sizes
arm64: dts: renesas: r9a08g045: Add PSCI support
arm64: dts: renesas: rzg3s-smarc-som: Guard Ethernet IRQ GPIO hogs
arm64: dts: renesas: r9a08g045: Add missing interrupts to IRQC node
arm64: dts: renesas: rzg2l: Add missing interrupts to IRQC nodes
arm64: dts: renesas: r8a779h0: Add CA76 operating points
arm64: dts: renesas: r8a779h0: Add CPU core clocks
...
Link: https://lore.kernel.org/r/cover.1708687134.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
Renesas DT binding updates for v6.9 (take two)
- Restore sort order,
- Document preferred compatible naming,
* tag 'renesas-dt-bindings-for-v6.9-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
dt-bindings: renesas: Document preferred compatible naming
dt-bindings: soc: renesas: Preserve the order of SoCs based on their part numbers
Link: https://lore.kernel.org/r/cover.1708687132.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt
Display output for rk3128 and some adaptions to binding clarifications
for hdmi nodes on some older socs.
* tag 'v6.9-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: rockchip: fix rk322x hdmi ports node
ARM: dts: rockchip: fix rk3288 hdmi ports node
ARM: dts: rockchip: Enable HDMI output for XPI-3128
ARM: dts: rockchip: Add HDMI node for RK3128
ARM: dts: rockchip: Add display subsystem for RK3128
Link: https://lore.kernel.org/r/37970455.XM6RcZxFsP@diego
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt
New boards: Powkiddy RGB10MAX3, Pine64 PineTab2, NanoPi R6C+R6S, Anbernic
RG-ARC S and RG-ARC D.
New peripherals: rs485 on Theobroma Systems boards, usb3 on Indidroid Nova,
Edgeble NCM6A (usb2, m.2, ethernet, wifi, cpu-regulator), Rock-5b rfkill
for wifi, cache information for rk3399.
Snmaller DT fixes (hdmi nodes, aliases, redundant card-detect gpios, max-
frequency for spi-flashes on rock-pi 4 boards, missing pmu-io-domains on
Ringneck)
* tag 'v6.9-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (38 commits)
arm64: dts: rockchip: Add USB3.0 to Indiedroid Nova
arm64: dts: rockchip: adjust phy-handle name on rock-pi-e
arm64: dts: rockchip: fix rk3399 hdmi ports node
arm64: dts: rockchip: fix rk3328 hdmi ports node
arm64: dts: rockchip: remove redundant cd-gpios from rk3588 sdmmc nodes
arm64: dts: rockchip: add rs485 support on uart5 of px30-ringneck-haikou
arm64: dts: rockchip: add rs485 support on uart2 of rk3399-puma-haikou
arm64: dts: rockchip: Add Powkiddy RGB10MAX3
dt-bindings: arm: rockchip: Add Powkiddy RGB10MAX3
arm64: dts: rockchip: Update powkiddy rk2023 dtsi for RGB10MAX3
arm64: dts: rockchip: Add devicetree for Pine64 PineTab2
dt-bindings: arm64: rockchip: Add Pine64 PineTab2
arm64: dts: rockchip: Add Touch to Anbernic RG-ARC D
arm64: dts: rockchip: fix nanopc-t6 sdmmc regulator
arm64: dts: rockchip: remove duplicate SPI aliases for helios64
arm64: dts: rockchip: add spi controller aliases on rk3399
arm64: dts: rockchip: Add support for NanoPi R6C
arm64: dts: rockchip: Add support for NanoPi R6S
dt-bindings: arm: rockchip: Add NanoPi R6 series boards
arm64: dts: rockchip: Increase maximum frequency of SPI flash for ROCK Pi 4A/B/C
...
Link: https://lore.kernel.org/r/3622360.hdfAi7Kttb@diego
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into soc/dt
DTS fixes for the ARM Versatile boards:
- Use the "mtd-rom" compatible for the Realview ROM
- Fix up two VGA connector cells and labels
- Fix up the Cortex spelling
* tag 'versatile-dts-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator:
dt-bindings: arm: realview: Spelling s/ARM 11/Arm11/, s/Cortex A-/Cortex-A/
ARM: dts: integrator: Fix up VGA connector
ARM: dts: versatile: Fix up VGA connector
ARM: dts: arm: realview: Fix development chip ROM compatible value
Link: https://lore.kernel.org/r/CACRpkdaL6j6OdixHFHoMms4e=tXEw_6ynBMFb6m8=7KkVgEedA@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into soc/dt
Gemini DTS changes for the v6.9 kernel:
- Fix the node names of the DSA switch in DIR-685.
- Fix the node names of the Vitesse DSA switches.
- Fix up the Wiligear compatible strings
- Use KEY_RESTART where applicable.
* tag 'gemini-dts-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator:
ARM: dts: gemini: Fix switch node names on Vitesse switches
ARM: dts: gemini: Map reset keys to KEY_RESTART
ARM: dts: gemini: Fix wiligear compatible strings
ARM: dts: gemini: Fix switch node names in the DIR-685
Link: https://lore.kernel.org/r/CACRpkdYQv9cyCZyjgQB4FTrxek9Hfu4EZ3syfHqHF7P6gzddvA@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux into soc/dt
MediaTek ARM64 DeviceTree updates for v6.9
This adds support for the following new machines:
- MT7981B: Xiaomi AX3000T
- MT7986A: Acelink EW-7886CAX
- MT7988A: BananaPi BPI-R4
- MT8186 Chromebooks: Tentacruel, Tentacool, Steelix, Rusty, Magneton
- MT8395/MT8195: Radxa NIO 12L
Also adds more support for the MediaTek MT8186 SoC's Video and JPEG
encoders and for MT7988 clocks, enables wakeup support for the CrOS
EC on SPI in all MediaTek Chromebooks, performs some cleanups and
includes some spare fixes.
* tag 'mtk-dts64-for-v6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux: (51 commits)
arm64: dts: mt8195-cherry-tomato: change watchdog reset boot flow
arm64: dts: mt7986: add port@5 as CPU port
arm64: dts: mt7622: add port@5 as CPU port
arm64: dts: mediatek: Replace deprecated extcon-usb-gpio id-gpio/vbus-gpio properties
arm64: dts: mediatek: replace underscores in node names
arm64: dts: mediatek: mt8186: Add missing xhci clock to usb controllers
arm64: dts: mediatek: mt8186: Add missing clocks to ssusb power domains
arm64: dts: mediatek: mt7622: add missing "device_type" to memory nodes
arm64: dts: mediatek: mt7986: reorder nodes
arm64: dts: mediatek: mt7986: reorder properties
arm64: dts: mediatek: Add Acelink EW-7886CAX
dt-bindings: arm64: dts: mediatek: Add Acelink EW-7886CAX access point
dt-bindings: vendor-prefixes: add acelink
arm64: dts: mediatek: Introduce the MT8395 Radxa NIO 12L board
dt-bindings: arm64: mediatek: Add MT8395 Radxa NIO 12L board compatible
arm64: dts: mediatek: mt8186: Add video decoder device nodes
arm64: dts: mediatek: mt8195: Add MTU3 nodes and correctly describe USB
arm64: dts: mediatek: Add MT8186 Magneton Chromebooks
arm64: dts: mediatek: Add MT8186 Steelix platform based Rusty
arm64: dts: mediatek: Introduce MT8186 Steelix
...
Link: https://lore.kernel.org/r/20240219131230.157792-1-angelogioacchino.delregno@collabora.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt into soc/dt
Minor improvements in ARM DTS for v6.9
1. Marvell MMP2: Very old issue, for which I sent patch back in 2014.
Patch was never picked up and now another try to fix the same
happened, so here it goes: use proper compatible MAX8925.
2. Marvell Dove: add proper unit-addresses.
3. TI DA850: add MMC interrupts.
4. STI: minor white-space fixes.
* tag 'dt-cleanup-6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt:
ARM: dts: sti: minor whitespace cleanup around '='
ARM: dts: da850: add MMD SDIO interrupts
ARM: dts: marvell: dove-cubox: fix si5351 node names
arm: dts: marvell: Fix maxium->maxim typo in brownstone dts
Link: https://lore.kernel.org/r/20240218182656.32103-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/dt
Samsung DTS ARM changes for v6.9
1. Disable thermal polling by Linux in Eynos5422 Odroid XU3 boards,
because drivers implement now proper dynamic trip points management.
2. Mark crosc-ec-spi in Peach Pi and Peach Pit as wake-up source, to
reflect the hardware capabilities.
3. Samsung P4 Note (Exynos4412): add accelerometer.
4. Samsung Galaxy Tab (Exynos5420):
- Reduce available RAM to avoid conflict with TrustZone.
- Add WiFi on MMC.
* tag 'samsung-dt-6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: samsung: exynos5420-galaxy-tab-common: add wifi node
ARM: dts: samsung: exynos5420-galaxy-tab: decrease available memory
ARM: dts: samsung: exynos4412-p4note: add accelerometer and gyro to p4note
ARM: dts: samsung: exynos5800-peach: Enable cros-ec-spi as wake source
ARM: dts: samsung: exynos5420-peach: Enable cros-ec-spi as wake source
ARM: dts: samsung: exynos5422-odroidxu3: disable thermal polling
Link: https://lore.kernel.org/r/20240218182141.31213-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/dt
Samsung DTS ARM64 changes for v6.9
Mostly work around Google GS101 SoC and Pixel phone (Oriole) adding
support for:
1. Multi Core Timer (MCT) clocksource.
2. Several clock controllers (DTS and DT bindings) and use new clocks in
several other device nodes.
3. More serial-interface instances: USI8 and USI12 with I2C.
Exynos850:
1. SPI and DMA controllers (PL330).
* tag 'samsung-dt64-6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
arm64: dts: fsd: Add fifosize for UART in Device Tree
arm64: dts: exynos: gs101: minor whitespace cleanup
arm64: dts: exynos: gs101: enable i2c bus 12 on gs101-oriole
arm64: dts: exynos: gs101: define USI12 with I2C configuration
arm64: dts: exynos: gs101: enable cmu-peric1 clock controller
dt-bindings: clock: google,gs101-clock: add PERIC1 clock management unit
arm64: dts: exynos: Add SPI nodes for Exynos850
arm64: dts: exynos: Add PDMA node for Exynos850
arm64: dts: exynos: gs101: use correct clocks for usi_uart
arm64: dts: exynos: gs101: use correct clocks for usi8
arm64: dts: exynos: gs101: sysreg_peric0 needs a clock
arm64: dts: exynos: gs101: enable eeprom on gs101-oriole
arm64: dts: exynos: gs101: define USI8 with I2C configuration
arm64: dts: exynos: gs101: update USI UART to use peric0 clocks
arm64: dts: exynos: gs101: enable cmu-peric0 clock controller
arm64: dts: exynos: gs101: remove reg-io-width from serial
arm64: dts: exynos: gs101: define Multi Core Timer (MCT) node
dt-bindings: clock: exynos850: Add PDMA clocks
dt-bindings: clock: google,gs101-clock: add PERIC0 clock management unit
Link: https://lore.kernel.org/r/20240218182141.31213-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
Renesas DTS updates for v6.9
- Add GPIO keys and watchdog support for the RZ/G3S SMARC development
board,
- Add GNSS support for Renesas ULCB development boards equipped with
the Shimafuji Kingfisher extension,
- Add support for the standalone White Hawk CPU board,
- Add support for the R-Car V4H ES2.0 (R8A779G2) SoC and the White
Hawk Single development board,
- Add initial support for the R-Car V4M (R8A779H0) SoC and the Gray
Hawk Single development board,
- Add camera support for the RZ/G2UL SoC,
- Miscellaneous fixes and improvements.
* tag 'renesas-dts-for-v6.9-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: (29 commits)
arm64: dts: renesas: gray-hawk-single: Enable watchdog timer
arm64: dts: renesas: r8a779h0: Add RWDT node
arm64: dts: renesas: Improve TMU interrupt descriptions
ARM: dts: renesas: Improve TMU interrupt descriptions
arm64: dts: renesas: r9a07g043u: Add CSI and CRU nodes
arm64: dts: renesas: Add Gray Hawk Single board support
arm64: dts: renesas: Add Renesas R8A779H0 SoC support
arm64: dts: renesas: rzg3s-smarc-som: Enable the watchdog interface
arm64: dts: renesas: r9a08g045: Add watchdog node
arm64: dts: renesas: r8a779g0: Add missing SCIF_CLK2
dt-bindings: clock: Add R8A779H0 V4M CPG Core Clock Definitions
dt-bindings: clock: renesas,cpg-mssr: Document R-Car V4M support
dt-bindings: power: Add r8a779h0 SYSC power domain definitions
dt-bindings: power: renesas,rcar-sysc: Document R-Car V4M support
arm64: dts: renesas: r8a779g2: Add White Hawk Single support
arm64: dts: renesas: Add Renesas R8A779G2 SoC support
arm64: dts: renesas: white-hawk: Factor out common parts
arm64: dts: renesas: white-hawk-cpu: Factor out common parts
arm64: dts: renesas: white-hawk: Add SoC name to top-level comment
arm64: dts: renesas: white-hawk: Drop SoC parts from sub boards
...
Link: https://lore.kernel.org/r/cover.1707487834.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
Renesas DT binding updates for v6.9
- Document support for the Renesas R-Car V4M (R8A779H0) SoC, and the
White Hawk Single and Gray Hawk Single development boards.
* tag 'renesas-dt-bindings-for-v6.9-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
dt-bindings: soc: renesas: Document R-Car V4M Gray Hawk Single
dt-bindings: reset: renesas,rst: Document R-Car V4M support
dt-bindings: soc: renesas: Document R-Car V4H White Hawk Single
Link: https://lore.kernel.org/r/cover.1707487832.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Now that all the interrupt warnings have been fixed, enable
'interrupt_provider' check by default. This will also enable
'interrupt_map' check.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20240213-arm-dt-cleanups-v1-6-f2dee1292525@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
As the TWL6030 chip is the main power controller here, declare
it as system-power-controller
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Message-ID: <20240217082007.3238948-5-andreas@kemnade.info>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
Configure the TWL6032 as system power controller to let the device
power off.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Message-ID: <20240217082007.3238948-4-andreas@kemnade.info>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
Move the pending urls back to https:// and mark the ones that are no
longer accessible (http or https) as defunct.
Signed-off-by: Nishanth Menon <nm@ti.com>
Message-ID: <20240109195500.3833121-1-nm@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
for dra7 SoC
abb_{mpu,ivahd,dspeve,gpu} have 'reg' so they must have unit address to fix dtc
W=1 warnings:
Warning (unit_address_vs_reg): /ocp/regulator-abb-mpu: node has a reg or ranges property, but no unit name
Warning (unit_address_vs_reg): /ocp/regulator-abb-ivahd: node has a reg or ranges property, but no unit name
Warning (unit_address_vs_reg): /ocp/regulator-abb-dspeve: node has a reg or ranges property, but no unit name
Warning (unit_address_vs_reg): /ocp/regulator-abb-gpu: node has a reg or ranges property, but no unit name
Signed-off-by: Romain Naour <romain.naour@skf.com>
Message-ID: <20240123085551.733155-3-romain.naour@smile.fr>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
sys_32k_ck node have 'reg' so it must have unit address to fix dtc
W=1 warnings:
Warning (unit_address_vs_reg): /ocp/interconnect@4a000000/segment@0/target-module@2000/scm@0/scm_conf@0/clocks/clock-sys-32k: node has a reg or ranges property, but no unit name
Signed-off-by: Romain Naour <romain.naour@skf.com>
Message-ID: <20240123085551.733155-2-romain.naour@smile.fr>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
phy_gmii_sel node have 'reg' so it must have unit address to fix dtc
W=1 warnings:
Warning (unit_address_vs_reg): /ocp/interconnect@4a000000/segment@0/target-module@2000/scm@0/scm_conf@0/phy-gmii-sel: node has a reg or ranges property, but no unit name
Signed-off-by: Romain Naour <romain.naour@skf.com>
Message-ID: <20240123085551.733155-1-romain.naour@smile.fr>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
HummingBoard-T features two M.2 connectors labeled "M1" and "M2".
The single SerDes lane of the SoC can be routed to either M1 pci-e
signals, or M2 usb-3 signals by a gpio-controlled mux.
Add overlays for each configuration.
Signed-off-by: Josua Mayer <josua@solid-run.com>
Link: https://lore.kernel.org/r/20240219-add-am64-som-v7-4-0e6e95b0a05d@solid-run.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
|
|
Add description for the SolidRun AM642 SoM, and HummingBoard-T
evaluation board.
The SoM features:
- 1x cpsw ethernet with phy
- 2x pru ethernet with phy
- eMMC
- spi flash (assembly option)
Additionally microSD and usb-2.0 otg are included in the SoM
description as they are supported boot sources for the SOC boot-rom.
The Carrier provides:
- 3x RJ45 connector
- 2x M.2 connector
- USB-2.0 Hub
- USB-A Connector
- LEDs
- 2x CAN transceiver
- 1x RS485 transceiver
- sensors
The M.2 connectors support either USB-3.1 or PCI-E depending on status
of a mux. By default the mux is switched off.
Signed-off-by: Josua Mayer <josua@solid-run.com>
Link: https://lore.kernel.org/r/20240219-add-am64-som-v7-3-0e6e95b0a05d@solid-run.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
|
|
Add bindings for SolidRun AM642 HummingBoard-T Board, which is the
evaluation board for SolidRun AM642 SoM.
Signed-off-by: Josua Mayer <josua@solid-run.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240219-add-am64-som-v7-1-0e6e95b0a05d@solid-run.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
|
|
According to motorcomm,yt8xxx.yaml, the compatible string must be
only 'ethernet-phy-id4f51.e91b'.
Remove 'ethernet-phy-ieee802.3-c22' to fix the following dt-schema warning:
imx8mm-kontron-bl-osm-s.dtb: ethernet-phy@0: compatible: ['ethernet-phy-id4f51.e91b', 'ethernet-phy-ieee802.3-c22'] is too long
from schema $id: http://devicetree.org/schemas/net/motorcomm,yt8xxx.yaml#
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The 'reset-names' property is not a valid one under ethernet-phy
and causes the following dt-schema warning:
/imx8qm-apalis-v1.1-eval-v1.2.dtb: ethernet-phy@7: 'resets' is a dependency of 'reset-names'
from schema $id: http://devicetree.org/schemas/reset/reset.yaml#
Remove this property.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
DT node names should be generic, so replace "weim" node name with
"memory-controller" in all i.MX SoC DT files.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The canonical node name for touchscreens is "touchscreen",
so update the i.MX6UL "tsc" node accordingly.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Replace all "xnur-gpio" with "xnur-gpios" in the i.MX6UL(L) Touchscreen
node, since the -gpio suffix is deprecated. All known implementations of
this binding can handle -gpio and -gpios since day 1, so this should be
fully backwards compatible.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
fsl,anatop should only be added to the usbphy nodes.
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
pinctrl node name must be either pinctrl or pinmux.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Per davicom,dm9000.yaml, the Ethernet node name should be 'ethernet'.
Change it to fix the following schema warning:
imx1-apf9328.dtb: eth@4,c00000: $nodename:0: 'eth@4,c00000' does not match '^ethernet(@.*)?$'
from schema $id: http://devicetree.org/schemas/net/davicom,dm9000.yaml#
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Per at24.yaml, the node name should be 'eeprom'.
Change it accordingly to fix the following schema warning:
imx28-evk.dtb: at24@51: $nodename:0: 'at24@51' does not match '^eeprom@[0-9a-f]{1,2}$'
from schema $id: http://devicetree.org/schemas/eeprom/at24.yaml#
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Enable USB3 HW LPM feature.
Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
|
|
Pull bcachefs fixes from Kent Overstreet:
"Some more mostly boring fixes, but some not
User reported ones:
- the BTREE_ITER_FILTER_SNAPSHOTS one fixes a really nasty
performance bug; user reported an untar initially taking two
seconds and then ~2 minutes
- kill a __GFP_NOFAIL in the buffered read path; this was a leftover
from the trickier fix to kill __GFP_NOFAIL in readahead, where we
can't return errors (and have to silently truncate the read
ourselves).
bcachefs can't use GFP_NOFAIL for folio state unlike iomap based
filesystems because our folio state is just barely too big, 2MB
hugepages cause us to exceed the 2 page threshhold for GFP_NOFAIL.
additionally, the flags argument was just buggy, we weren't
supplying GFP_KERNEL previously (!)"
* tag 'bcachefs-2024-02-25' of https://evilpiepirate.org/git/bcachefs:
bcachefs: fix bch2_save_backtrace()
bcachefs: Fix check_snapshot() memcpy
bcachefs: Fix bch2_journal_flush_device_pins()
bcachefs: fix iov_iter count underflow on sub-block dio read
bcachefs: Fix BTREE_ITER_FILTER_SNAPSHOTS on inodes btree
bcachefs: Kill __GFP_NOFAIL in buffered read path
bcachefs: fix backpointer_to_text() when dev does not exist
|
|
Missed a call in the previous fix.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Pull two documentation build fixes from Jonathan Corbet:
- The XFS online fsck documentation uses incredibly deeply nested
subsection and list nesting; that broke the PDF docs build. Tweak a
parameter to tell LaTeX to allow the deeper nesting.
- Fix a 6.8 PDF-build regression
* tag 'docs-6.8-fixes3' of git://git.lwn.net/linux:
docs: translations: use attribute to store current language
docs: Instruct LaTeX to cope with deeper nesting
|
Arnd Bergmann
Rob Herring
Andreas Kemnade
Nishanth Menon
Romain Naour
Josua Mayer
Fabio Estevam
Sebastian Reichel
Li Yang
Linus Torvalds
Kent Overstreet
