Age | Commit message (Collapse) | Author | Files | Lines |
|
The CXL specification claims S3 support at a hardware level, but at a
system software level there are some missing pieces. Section 9.4 (CXL
2.0) rightly claims that "CXL mem adapters may need aux power to retain
memory context across S3", but there is no enumeration mechanism for the
OS to determine if a given adapter has that support. Moreover the save
state and resume image for the system may inadvertantly end up in a CXL
device that needs to be restored before the save state is recoverable.
I.e. a circular dependency that is not resolvable without a third party
save-area.
Arrange for the cxl_mem driver to fail S3 attempts. This still nominaly
allows for suspend, but requires unbinding all CXL memory devices before
the suspend to ensure the typical DRAM flow is taken. The cxl_mem unbind
flow is intended to also tear down all CXL memory regions associated
with a given cxl_memdev.
It is reasonable to assume that any device participating in a System RAM
range published in the EFI memory map is covered by aux power and
save-area outside the device itself. So this restriction can be
minimized in the future once pre-existing region enumeration support
arrives, and perhaps a spec update to clarify if the EFI memory map is
sufficent for determining the range of devices managed by
platform-firmware for S3 support.
Per Rafael, if the CXL configuration prevents suspend then it should
fail early before tasks are frozen, and mem_sleep should stop showing
'mem' as an option [1]. Effectively CXL augments the platform suspend
->valid() op since, for example, the ACPI ops are not aware of the CXL /
PCI dependencies. Given the split role of platform firmware vs OS
provisioned CXL memory it is up to the cxl_mem driver to determine if
the CXL configuration has elements that platform firmware may not be
prepared to restore.
Link: https://lore.kernel.org/r/CAJZ5v0hGVN_=3iU8OLpHY3Ak35T5+JcBM-qs8SbojKrpd0VXsA@mail.gmail.com [1]
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Len Brown <len.brown@intel.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/165066828317.3907920.5690432272182042556.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
cxl_mem_probe() already emits a log message when HDM operation can not
be established. Delete the similar one in cxl_hdm_decode_init().
What is less obvious is why global_ctrl being enabled makes positive
values of info->ranges irrelevant, and the Linux behavior with respect
to the spec recommendation to mirror CXL Range registers with HDM
Decoder Base + Size registers.
Cc: Ben Widawsky <ben.widawsky@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Link: https://lore.kernel.org/r/164944616743.454665.7055846627973202403.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
cxl_dvsec_decode_init() is tasked with checking whether legacy DVSEC
range based decode is in effect, or whether HDM can be enabled / already
is enabled. As such it either succeeds or fails and that result is the
return value. The @do_hdm_init variable is misleading in the case where
HDM operation is already found to be active, so just call it @retval.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Link: https://lore.kernel.org/r/164730736435.3806189.2537160791687837469.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
cxl_dvsec_ranges(), the helper for enumerating the presence of an active
legacy CXL.mem configuration on a CXL 2.0 Memory Expander, is not fatal
for cxl_pci because there is still value to enable mailbox operations
even if CXL.mem operation is disabled. Recall that the reason cxl_pci
does this initialization and not cxl_mem is to preserve the useful
property (for unit testing) that cxl_mem is cxl_memdev + mmio generic,
and does not require access to a 'struct pci_dev' to issue config
cycles.
Update 'struct cxl_endpoint_dvsec_info' to carry either a positive
number of non-zero size legacy CXL DVSEC ranges, or the negative error
code from __cxl_dvsec_ranges() in its @ranges member.
Reported-by: Krzysztof Zach <krzysztof.zach@intel.com>
Fixes: 560f78559006 ("cxl/pci: Retrieve CXL DVSEC memory info")
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Link: https://lore.kernel.org/r/164730735869.3806189.4032428192652531946.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
In preparation for the cxl_pci driver to continue operation after
cxl_dvsec_range() failure, update cxl_mem to check for negative error
codes in info->ranges. Treat that condition as fatal regardless of the
state of the HDM configuration since cxl_mem needs positive confirmation
that legacy ranges were not established by platform firmware or another
agent.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com.
Reviewed-by: Ben Widawsky <ben.widawsky@intel.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Link: https://lore.kernel.org/r/164730735324.3806189.4167509857771192422.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
In preparation for not treating DVSEC range initialization failures as
fatal to cxl_pci_probe() add individual dev_dbg() statements for each of
the major failure reasons in cxl_dvsec_ranges().
The rationale for cxl_dvsec_ranges() failure not being fatal is that
there is still value for cxl_pci to enable mailbox operations even if
CXL.mem operation is disabled.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ben Widawsky <ben.widawsky@intel.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Link: https://lore.kernel.org/r/164730734812.3806189.2726330688692684104.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
When the driver finds legacy DVSEC ranges active on a CXL Memory
Expander it indicates that platform firmware is not aware of, or is
deliberately disabling common CXL 2.0 operation. In this case Linux
generally has no choice, but to leave the device alone.
The driver attempts to validate that the DVSEC range is in the EFI
memory map. Remove that logic since there is no requirement that the
BIOS publish DVSEC ranges in the EFI Memory Map.
In the future the driver will want to permanently reserve this capacity
out of the available CFMWS capacity and hide it from
request_free_mem_region(), but it serves no purpose to warn about the
range not appearing in the EFI Memory Map.
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ben Widawsky <ben.widawsky@intel.com>
Link: https://lore.kernel.org/r/164730734246.3806189.13995924771963139898.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Use the global cxl_mbox_cmd_rc table to improve debug messaging
in __cxl_pci_mbox_send_cmd() and allow cxl_mbox_send_cmd()
to map to proper kernel style errno codes - this patch
continues to use -ENXIO only so no change in semantics.
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed by: Adam Manzanares <a.manzanares@samsung.com>
Link: https://lore.kernel.org/r/20220404021216.66841-5-dave@stgolabs.net
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Upon a completed command the caller is still expected to check
the actual return_code register to ensure it succeed. This
adds, per the spec, the potential command return codes. It maps
the hardware return code with the kernel's errno style, and by
default continues to use -ENXIO (Command completed, but device
reported an error).
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed by: Adam Manzanares <a.manzanares@samsung.com>
Link: https://lore.kernel.org/r/20220404021216.66841-4-dave@stgolabs.net
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Also mention the need for the caller to check against any
errors from the hardware in return_code.
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed by: Adam Manzanares <a.manzanares@samsung.com>
Link: https://lore.kernel.org/r/20220404021216.66841-3-dave@stgolabs.net
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
... we have lockdep for this.
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed by: Adam Manzanares <a.manzanares@samsung.com>
Link: https://lore.kernel.org/r/20220404021216.66841-2-dave@stgolabs.net
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
With SET_PARTITION_INFO on the exclusive_cmds list for the CXL_PMEM
driver, userspace cannot execute a set-partition command without
first unbinding the pmem driver from the device.
When userspace requests a partition change to take effect on the
next reboot this unbind requirement is unnecessarily restrictive.
The driver does not need to enforce an unbind because partitions
will not change until the next reboot. Of course, userspace still
needs to be aware that changing the size of persistent capacity
on the next reboot will result in the loss of data stored. That
can happen regardless of whether it is presently bound at the time
of issuing the set-partition command.
When userspace requests a partition change to take effect immediately,
restrictions are needed. The CXL_MEM driver currently blocks the usage
of immediate mode, making the presence of SET_PARTITION_INFO, in this
exclusive commands list, redundant.
In the future, when the CXL_MEM driver adds support for immediate
changes to device partitions it will ensure that the partition change
will not affect any active decode. That means the work will not fall
right back here, onto the CXL_PMEM driver.
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Link: https://lore.kernel.org/r/accc6abc878f0662093b81490a1a052f2ff6f06e.1648687552.git.alison.schofield@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
User space may send the SET_PARTITION_INFO mailbox command using
the IOCTL interface. Inspect the input payload and fail if the
immediate flag is set.
This is the first instance of the driver inspecting an input payload
from user space. Assume there will be more such cases and implement
with an extensible helper.
In order for the kernel to react to an immediate partition change it
needs to assert that the change will not affect any active decode. At
a minimum this requires validating that the device is using HDM
decoders instead of the CXL DVSEC for decode, and that none of the
active HDM decoders are affected by the partition change. For now,
just fail until that support arrives.
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://lore.kernel.org/r/241821186c363833980adbc389e2c547bc5a6395.1648687552.git.alison.schofield@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
cxl_validate_command_from_user() is now the single point of validation
for mailbox commands coming from user space. Previously, it returned a
a cxl_mem_command, but that was not sufficient when validation of the
actual mailbox command became a requirement. Now, it returns a fully
validated cxl_mbox_cmd.
Remove the extraneous cxl_mem_command parameter. Define and use a
local version only.
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://lore.kernel.org/r/c11a437896d914daf36f5ac8ec62f999c5ec2da7.1648687552.git.alison.schofield@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Previously, handle_mailbox_cmd_from_user(), constructed the mailbox
command and dispatched it to the hardware. The construction work
has moved to the validation path.
handle_mailbox_cmd_from_user() now expects a fully validated
mbox param. Make it's caller, cxl_send_cmd(), deliver it. Update
the comments and dereferencing of the new mbox parameter.
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://lore.kernel.org/r/77050ba512d6c30eccf7505467509e460dd325a0.1648687552.git.alison.schofield@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
In preparation for removing access to struct cxl_mem_command,
change this debug message to use cxl_mbox_cmd fields instead.
Retrieve the pretty command name from cxl_mbox_cmd using a new
opcode to command name helper.
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://lore.kernel.org/r/57265751d336a6e95f5ca31a9c77189408b05742.1648687552.git.alison.schofield@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
This is a step in refactoring the handling of user space mailbox
commands. The intent is to have all the validation work originate
in cxl_validate_cmd_from_user().
Move the construction and validation of a mailbox command to the
validation path. Continue to pass both the out_cmd and the mbox_cmd
until handle_mbox_cmd_from_user() learns how to use a mbox_cmd param.
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://lore.kernel.org/r/c9fbdad968a2b619f9108bb6c37cef1a853cdf5a.1648687552.git.alison.schofield@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
In preparation for moving the construction of a mailbox command
to the validation path, extract the work into a helper functions.
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://lore.kernel.org/r/493d7618a846d787c3ae28778935ca35e2b85eed.1648687552.git.alison.schofield@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
This move serves two purposes: 1) Emit the warning in the raw
command validation path, and 2) Remove the dependency on the
struct cxl_mem_command in handle_mailbox_cmd_from_user() in
preparation for a refactor of that function.
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://lore.kernel.org/r/df5f0e0ec8afa1f75299aa86b4226ab4479ef325.1648687552.git.alison.schofield@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Sanitizing and constructing a cxl_mem_command from a userspace
command is part of the validation process prior to submitting
the command to a CXL device. Move this work to helper functions:
cxl_to_mem_cmd(), cxl_to_mem_cmd_raw().
This declutters cxl_validate_cmd_from_user() in preparation for
adding new validation steps.
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://lore.kernel.org/r/7d9b826f29262e3a484cb4bb7b63872134d60bd7.1648687552.git.alison.schofield@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull serial driver fix from Greg KH:
"This is a single serial driver fix for a build issue that showed up
due to changes that came in through the tty tree in 5.18-rc1 that were
missed previously. It resolves a build error with the mpc52xx_uart
driver.
It has been in linux-next this week with no reported problems"
* tag 'tty-5.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
tty: serial: mpc52xx_uart: make rx/tx hooks return unsigned, part II.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fix from Greg KH:
"Here is a single staging driver fix for 5.18-rc2 that resolves an
endian issue for the r8188eu driver. It has been in linux-next all
this week with no reported problems"
* tag 'staging-5.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: r8188eu: Fix PPPoE tag insertion on little endian systems
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here are two small driver core changes for 5.18-rc2.
They are the final bits in the removal of the default_attrs field in
struct kobj_type. I had to wait until after 5.18-rc1 for all of the
changes to do this came in through different development trees, and
then one new user snuck in. So this series has two changes:
- removal of the default_attrs field in the powerpc/pseries/vas code.
The change has been acked by the PPC maintainers to come through
this tree
- removal of default_attrs from struct kobj_type now that all
in-kernel users are removed.
This cleans up the kobject code a little bit and removes some
duplicated functionality that confused people (now there is only
one way to do default groups)
Both of these have been in linux-next for all of this week with no
reported problems"
* tag 'driver-core-5.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
kobject: kobj_type: remove default_attrs
powerpc/pseries/vas: use default_groups in kobj_type
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fix from Greg KH:
"A single driver fix. It resolves the build warning issue on 32bit
systems in the habannalabs driver that came in during the 5.18-rc1
merge cycle.
It has been in linux-next for all this week with no reported problems"
* tag 'char-misc-5.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
habanalabs: Fix test build failures
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix KVM "lost kick" race, where an attempt to pull a vcpu out of the
guest could be lost (or delayed until the next guest exit).
- Disable SCV (system call vectored) when PR KVM guests could be run.
- Fix KVM PR guests using SCV, by disallowing AIL != 0 for KVM PR
guests.
- Add a new KVM CAP to indicate if AIL == 3 is supported.
- Fix a regression when hotplugging a CPU to a memoryless/cpuless node.
- Make virt_addr_valid() stricter for 64-bit Book3E & 32-bit, which
fixes crashes seen due to hardened usercopy.
- Revert a change to max_mapnr which broke HIGHMEM.
Thanks to Christophe Leroy, Fabiano Rosas, Kefeng Wang, Nicholas Piggin,
and Srikar Dronamraju.
* tag 'powerpc-5.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
Revert "powerpc: Set max_mapnr correctly"
powerpc: Fix virt_addr_valid() for 64-bit Book3E & 32-bit
KVM: PPC: Move kvmhv_on_pseries() into kvm_ppc.h
powerpc/numa: Handle partially initialized numa nodes
powerpc/64: Fix build failure with allyesconfig in book3s_64_entry.S
KVM: PPC: Use KVM_CAP_PPC_AIL_MODE_3
KVM: PPC: Book3S PR: Disallow AIL != 0
KVM: PPC: Book3S PR: Disable SCV when AIL could be disabled
KVM: PPC: Book3S HV P9: Fix "lost kick" race
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
"A set of interrupt chip driver fixes:
- A fix for a long standing bug in the ARM GICv3 redistributor
polling which uses the wrong bit number to test.
- Prevent translation of bogus ACPI table entries which map device
interrupts into the IPI space on ARM GICs.
- Don't write into the pending register of ARM GICV4 before the scan
in hardware has completed.
- A set of build and correctness fixes for the Qualcomm MPM driver"
* tag 'irq-urgent-2022-04-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/gic, gic-v3: Prevent GSI to SGI translations
irqchip/gic-v3: Fix GICR_CTLR.RWP polling
irqchip/gic-v4: Wait for GICR_VPENDBASER.Dirty to clear before descheduling
irqchip/irq-qcom-mpm: fix return value check in qcom_mpm_init()
irq/qcom-mpm: Fix build error without MAILBOX
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Fix the MSI message data struct definition
- Use local labels in the exception table macros to avoid symbol
conflicts with clang LTO builds
- A couple of fixes to objtool checking of the relatively newly added
SLS and IBT code
- Rename a local var in the WARN* macro machinery to prevent shadowing
* tag 'x86_urgent_for_v5.18_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/msi: Fix msi message data shadow struct
x86/extable: Prefer local labels in .set directives
x86,bpf: Avoid IBT objtool warning
objtool: Fix SLS validation for kcov tail-call replacement
objtool: Fix IBT tail-call detection
x86/bug: Prevent shadowing in __WARN_FLAGS
x86/mm/tlb: Revert retpoline avoidance approach
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Borislav Petkov:
- A couple of fixes to cgroup-related handling of perf events
- A couple of fixes to event encoding on Sapphire Rapids
- Pass event caps of inherited events so that perf doesn't fail wrongly
at fork()
- Add support for a new Raptor Lake CPU
* tag 'perf_urgent_for_v5.18_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Always set cpuctx cgrp when enable cgroup event
perf/core: Fix perf_cgroup_switch()
perf/core: Use perf_cgroup_info->active to check if cgroup is active
perf/core: Don't pass task around when ctx sched in
perf/x86/intel: Update the FRONTEND MSR mask on Sapphire Rapids
perf/x86/intel: Don't extend the pseudo-encoding to GP counters
perf/core: Inherit event_caps
perf/x86/uncore: Add Raptor Lake uncore support
perf/x86/msr: Add Raptor Lake CPU support
perf/x86/cstate: Add Raptor Lake support
perf/x86: Add Intel Raptor Lake support
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fixes from Borislav Petkov:
- Allow the compiler to optimize away unused percpu accesses and change
the local_lock_* macros back to inline functions
- A couple of fixes to static call insn patching
* tag 'locking_urgent_for_v5.18_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Revert "mm/page_alloc: mark pagesets as __maybe_unused"
Revert "locking/local_lock: Make the empty local_lock_*() function a macro."
x86/percpu: Remove volatile from arch_raw_cpu_ptr().
static_call: Remove __DEFINE_STATIC_CALL macro
static_call: Properly initialise DEFINE_STATIC_CALL_RET0()
static_call: Don't make __static_call_return0 static
x86,static_call: Fix __static_call_return0 for i386
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Borislav Petkov:
- Use the correct static key checking primitive on the IRQ exit path
- Two fixes for the new forceidle balancer
* tag 'sched_urgent_for_v5.18_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
entry: Fix compile error in dynamic_irqentry_exit_cond_resched()
sched: Teach the forced-newidle balancer about CPU affinity limitation.
sched/core: Fix forceidle balancing
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Fix the clang command line option probing and remove some options to
filter out, fixing the build with the latest clang versions
- Fix 'perf bench' futex and epoll benchmarks to deal with machines
with more than 1K CPUs
- Fix 'perf test tsc' error message when not supported
- Remap perf ring buffer if there is no space for event, fixing perf
usage in 32-bit ChromeOS
- Drop objdump stderr to avoid getting stuck waiting for stdout output
in 'perf annotate'
- Fix up garbled output by now showing unwind error messages when
augmenting frame in best effort mode
- Fix perf's libperf_print callback, use the va_args eprintf() variant
- Sync vhost and arm64 cputype headers with the kernel sources
- Fix 'perf report --mem-mode' with ARM SPE
- Add missing external commands ('iiostat', etc) to 'perf --list-cmds'
* tag 'perf-tools-fixes-for-v5.18-2022-04-09' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf annotate: Drop objdump stderr to avoid getting stuck waiting for stdout output
perf tools: Add external commands to list-cmds
perf docs: Add perf-iostat link to manpages
perf session: Remap buf if there is no space for event
perf bench: Fix epoll bench to correct usage of affinity for machines with #CPUs > 1K
perf bench: Fix futex bench to correct usage of affinity for machines with #CPUs > 1K
perf tools: Fix perf's libperf_print callback
perf: arm-spe: Fix perf report --mem-mode
perf unwind: Don't show unwind error messages when augmenting frame pointer stack
tools headers arm64: Sync arm64's cputype.h with the kernel sources
perf test tsc: Fix error message when not supported
perf build: Don't use -ffat-lto-objects in the python feature test when building with clang-13
perf python: Fix probing for some clang command line options
tools build: Filter out options and warnings not supported by clang
tools build: Use $(shell ) instead of `` to get embedded libperl's ccopts
tools include UAPI: Sync linux/vhost.h with the kernel sources
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull cxl and nvdimm fixes from Dan Williams:
- Fix a compile error in the nvdimm unit tests
- Fix a shadowed variable warning in the CXL PCI driver
* tag 'cxl+nvdimm-for-5.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
cxl/pci: Drop shadowed variable
tools/testing/nvdimm: Fix security_init() symbol collision
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fix from Bartosz Golaszewski:
- fix a race condition with consumers accessing the fields of GPIO IRQ
chips before they're fully initialized
* tag 'gpio-fixes-for-v5.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: Restrict usage of GPIO chip irq members before initialization
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent
Pull irqchip fixes from Marc Zyngier:
- Fix GICv3 polling for RWP in redistributors
- Reject ACPI attempts to use SGIs on GIC/GICv3
- Fix unpredictible behaviour when making a VPE non-resident
with GICv4
- A couple of fixes for the newly merged qcom-mpm driver
Link: https://lore.kernel.org/lkml/20220409094229.267649-1-maz@kernel.org
|
|
output
If objdump writes to stderr it can block waiting for it to be read. As
perf doesn't read stderr then progress stops with perf waiting for
stdout output.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Truong <alexandre.truong@arm.com>
Cc: Dave Marchevsky <davemarchevsky@fb.com>
Cc: Denis Nikitin <denik@chromium.org>
Cc: German Gomez <german.gomez@arm.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Lexi Shao <shaolexi@huawei.com>
Cc: Li Huafei <lihuafei1@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin Liška <mliska@suse.cz>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Remi Bernon <rbernon@codeweavers.com>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Cc: William Cohen <wcohen@redhat.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lore.kernel.org/lkml/20220407230503.1265036-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The `perf --list-cmds` output prints only internal commands, although
there is no reason for that from users' perspective.
Adding the external commands to commands array with NULL function
pointer allows printing all perf commands while not changing the logic
of command handler selection.
Signed-off-by: Michael Petlan <mpetlan@redhat.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20220404221541.30312-2-mpetlan@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Signed-off-by: Michael Petlan <mpetlan@redhat.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20220404221541.30312-1-mpetlan@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
If a perf event doesn't fit into remaining buffer space return NULL to
remap buf and fetch the event again.
Keep the logic to error out on inadequate input from fuzzing.
This fixes perf failing on ChromeOS (with 32b userspace):
$ perf report -v -i perf.data
...
prefetch_event: head=0x1fffff8 event->header_size=0x30, mmap_size=0x2000000: fuzzed or compressed perf.data?
Error:
failed to process sample
Fixes: 57fc032ad643ffd0 ("perf session: Avoid infinite loop when seeing invalid header.size")
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Denis Nikitin <denik@chromium.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20220330031130.2152327-1-denik@chromium.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
- add support for new devices (ufs, mvsas)
- a major set of fixes in lpfc
- get rid of a driver specific ioctl in pcmraid
- a major rework of aha152x to get rid of the scsi_pointer.
- minor fixes and obvious changes including several spelling updates.
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (36 commits)
scsi: megaraid_sas: Target with invalid LUN ID is deleted during scan
scsi: ufs: ufshpb: Fix a NULL check on list iterator
scsi: sd: Clean up gendisk if device_add_disk() failed
scsi: message: fusion: Remove redundant variable dmp
scsi: mvsas: Add PCI ID of RocketRaid 2640
scsi: sd: sd_read_cpr() requires VPD pages
scsi: mpt3sas: Fail reset operation if config request timed out
scsi: sym53c500_cs: Stop using struct scsi_pointer
scsi: ufs: ufs-pci: Add support for Intel MTL
scsi: mpt3sas: Fix mpt3sas_check_same_4gb_region() kdoc comment
scsi: scsi_debug: Fix sdebug_blk_mq_poll() in_use_bm bitmap use
scsi: bnx2i: Fix spelling mistake "mis-match" -> "mismatch"
scsi: bnx2fc: Fix spelling mistake "mis-match" -> "mismatch"
scsi: zorro7xx: Fix a resource leak in zorro7xx_remove_one()
scsi: aic7xxx: Use standard PCI subsystem, subdevice defines
scsi: ufs: qcom: Drop custom Android boot parameters
scsi: core: sysfs: Remove comments that conflict with the actual logic
scsi: hisi_sas: Remove stray fallthrough annotation
scsi: virtio-scsi: Eliminate anonymous module_init & module_exit
scsi: isci: Fix spelling mistake "doesnt" -> "doesn't"
...
|
|
#CPUs > 1K
The 'perf bench epoll' testcase fails on systems with more than 1K CPUs.
Testcase: perf bench epoll all
Result snippet:
<<>>
Run summary [PID 106497]: 1399 threads monitoring on 64 file-descriptors for 8 secs.
perf: pthread_create: No such file or directory
<<>>
In epoll benchmarks (ctl, wait) pthread_create is invoked in do_threads
from respective bench_epoll_* function. Though the logs shows direct
failure from pthread_create, the actual failure is from
"sched_setaffinity" returning EINVAL (invalid argument).
This happens because the default mask size in glibc is 1024. To overcome
this 1024 CPUs mask size limitation of cpu_set_t, change the mask size
using the CPU_*_S macros.
Patch addresses this by fixing all the epoll benchmarks to use CPU_ALLOC
to allocate cpumask, CPU_ALLOC_SIZE for size, and CPU_SET_S to set the
mask.
Reported-by: Disha Goel <disgoel@linux.vnet.ibm.com>
Signed-off-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Tested-by: Disha Goel <disgoel@linux.vnet.ibm.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nageswara R Sastry <rnsastry@linux.ibm.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20220406175113.87881-3-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
#CPUs > 1K
The 'perf bench futex' testcase fails on systems with more than 1K CPUs.
Testcase: perf bench futex all
Failure snippet:
<<>>Running futex/hash benchmark...
perf: pthread_create: No such file or directory
<<>>
All the futex benchmarks (ie hash, lock-api, requeue, wake,
wake-parallel), pthread_create is invoked in respective bench_futex_*
function. Though the logs shows direct failure from pthread_create,
strace logs showed that actual failure is from "sched_setaffinity"
returning EINVAL (invalid argument).
This happens because the default mask size in glibc is 1024. To overcome
this 1024 CPUs mask size limitation of cpu_set_t, change the mask size
using the CPU_*_S macros.
Patch addresses this by fixing all the futex benchmarks to use CPU_ALLOC
to allocate cpumask, CPU_ALLOC_SIZE for size, and CPU_SET_S to set the
mask.
Reported-by: Disha Goel <disgoel@linux.vnet.ibm.com>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Tested-by: Disha Goel <disgoel@linux.vnet.ibm.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nageswara R Sastry <rnsastry@linux.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20220406175113.87881-2-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
eprintf() does not expect va_list as the type of the 4th parameter.
Use veprintf() because it does.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Fixes: 428dab813a56ce94 ("libperf: Merge libperf_set_print() into libperf_init()")
Cc: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20220408132625.2451452-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Since commit bb30acae4c4dacfa ("perf report: Bail out --mem-mode if mem
info is not available") "perf mem report" and "perf report --mem-mode"
don't allow opening the file unless one of the events has
PERF_SAMPLE_DATA_SRC set.
SPE doesn't have this set even though synthetic memory data is generated
after it is decoded. Fix this issue by setting DATA_SRC on SPE events.
This has no effect on the data collected because the SPE driver doesn't
do anything with that flag and doesn't generate samples.
Fixes: bb30acae4c4dacfa ("perf report: Bail out --mem-mode if mem info is not available")
Signed-off-by: James Clark <james.clark@arm.com>
Tested-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20220408144056.1955535-1-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
stack
Commit Fixes: b9f6fbb3b2c29736 ("perf arm64: Inject missing frames when
using 'perf record --call-graph=fp'") intended to add a 'best effort'
DWARF unwind that improved the frame pointer stack in most scenarios.
It's expected that the unwind will fail sometimes, but this shouldn't be
reported as an error. It only works when the return address can be
determined from the contents of the link register alone.
Fix the error shown when the unwinder requires extra registers by adding
a new flag that suppresses error messages. This flag is not set in the
normal --call-graph=dwarf unwind mode so that behavior is not changed.
Fixes: b9f6fbb3b2c29736 ("perf arm64: Inject missing frames when using 'perf record --call-graph=fp'")
Reported-by: John Garry <john.garry@huawei.com>
Signed-off-by: James Clark <james.clark@arm.com>
Tested-by: John Garry <john.garry@huawei.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Truong <alexandre.truong@arm.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20220406145651.1392529-1-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To get the changes in:
83bea32ac7ed37bb ("arm64: Add part number for Arm Cortex-A78AE")
That addresses this perf build warning:
Warning: Kernel ABI header at 'tools/arch/arm64/include/asm/cputype.h' differs from latest version at 'arch/arm64/include/asm/cputype.h'
diff -u tools/arch/arm64/include/asm/cputype.h arch/arm64/include/asm/cputype.h
Cc: Ali Saidi <alisaidi@amazon.com>
Cc: Andrew Kilroy <andrew.kilroy@arm.com>
Cc: Chanho Park <chanho61.park@samsung.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: James Clark <james.clark@arm.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Will Deacon <will@kernel.org>
Link: http://lore.kernel.org/lkml/
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
By default `perf test tsc` does not return the error message when the
child process detected kernel does not support it. Instead, the child
process prints an error message to stderr, unfortunately stderr is
redirected to /dev/null when verbose <= 0.
This patch does:
- return TEST_SKIP to the parent process instead of TEST_OK when
perf_read_tsc_conversion() is not supported.
- Add a new subtest of testing if TSC is supported on current
architecture by moving exist code to a separate function.
It avoids two places in test__perf_time_to_tsc() that return
TEST_SKIP by doing this.
- Extend the test suite definition to contain above two subtests.
Current test_suite and test_case structs do not support printing skip
reason when the number of subtest less than 1. To print skip reason, it
is necessary to extend current test suite definition.
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Chengdong Li <chengdongli@tencent.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: likexu@tencent.com
Link: https://lore.kernel.org/r/20220408084748.43707-1-chengdongli@tencent.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
building with clang-13
Using -ffat-lto-objects in the python feature test when building with
clang-13 results in:
clang-13: error: optimization flag '-ffat-lto-objects' is not supported [-Werror,-Wignored-optimization-argument]
error: command '/usr/sbin/clang' failed with exit code 1
cp: cannot stat '/tmp/build/perf/python_ext_build/lib/perf*.so': No such file or directory
make[2]: *** [Makefile.perf:639: /tmp/build/perf/python/perf.so] Error 1
Noticed when building on a docker.io/library/archlinux:base container.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Fangrui Song <maskray@google.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Keeping <john@metanate.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The clang compiler complains about some options even without a source
file being available, while others require one, so use the simple
tools/build/feature/test-hello.c file.
Then check for the "is not supported" string in its output, in addition
to the "unknown argument" already being looked for.
This was noticed when building with clang-13 where -ffat-lto-objects
isn't supported and since we were looking just for "unknown argument"
and not providing a source code to clang, was mistakenly assumed as
being available and not being filtered to set of command line options
provided to clang, leading to a build failure.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Fangrui Song <maskray@google.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Keeping <john@metanate.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Sedat Dilek <sedat.dilek@gmail.com>
Link: http://lore.kernel.org/lkml/
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
These make the feature check fail when using clang, so remove them just
like is done in tools/perf/Makefile.config to build perf itself.
Adding -Wno-compound-token-split-by-macro to tools/perf/Makefile.config
when building with clang is also necessary to avoid these warnings
turned into errors (-Werror):
CC /tmp/build/perf/util/scripting-engines/trace-event-perl.o
In file included from util/scripting-engines/trace-event-perl.c:35:
In file included from /usr/lib64/perl5/CORE/perl.h:4085:
In file included from /usr/lib64/perl5/CORE/hv.h:659:
In file included from /usr/lib64/perl5/CORE/hv_func.h:34:
In file included from /usr/lib64/perl5/CORE/sbox32_hash.h:4:
/usr/lib64/perl5/CORE/zaphod32_hash.h:150:5: error: '(' and '{' tokens introducing statement expression appear in different macro expansion contexts [-Werror,-Wcompound-token-split-by-macro]
ZAPHOD32_SCRAMBLE32(state[0],0x9fade23b);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/usr/lib64/perl5/CORE/zaphod32_hash.h:80:38: note: expanded from macro 'ZAPHOD32_SCRAMBLE32'
#define ZAPHOD32_SCRAMBLE32(v,prime) STMT_START { \
^~~~~~~~~~
/usr/lib64/perl5/CORE/perl.h:737:29: note: expanded from macro 'STMT_START'
# define STMT_START (void)( /* gcc supports "({ STATEMENTS; })" */
^
/usr/lib64/perl5/CORE/zaphod32_hash.h:150:5: note: '{' token is here
ZAPHOD32_SCRAMBLE32(state[0],0x9fade23b);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/usr/lib64/perl5/CORE/zaphod32_hash.h:80:49: note: expanded from macro 'ZAPHOD32_SCRAMBLE32'
#define ZAPHOD32_SCRAMBLE32(v,prime) STMT_START { \
^
/usr/lib64/perl5/CORE/zaphod32_hash.h:150:5: error: '}' and ')' tokens terminating statement expression appear in different macro expansion contexts [-Werror,-Wcompound-token-split-by-macro]
ZAPHOD32_SCRAMBLE32(state[0],0x9fade23b);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/usr/lib64/perl5/CORE/zaphod32_hash.h:87:41: note: expanded from macro 'ZAPHOD32_SCRAMBLE32'
v ^= (v>>23); \
^
/usr/lib64/perl5/CORE/zaphod32_hash.h:150:5: note: ')' token is here
ZAPHOD32_SCRAMBLE32(state[0],0x9fade23b);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/usr/lib64/perl5/CORE/zaphod32_hash.h:88:3: note: expanded from macro 'ZAPHOD32_SCRAMBLE32'
} STMT_END
^~~~~~~~
/usr/lib64/perl5/CORE/perl.h:738:21: note: expanded from macro 'STMT_END'
# define STMT_END )
^
Please refer to the discussion on the Link: tag below, where Nathan
clarifies the situation:
<quote>
acme> And then get to the problems at the end of this message, which seem
acme> similar to the problem described here:
acme>
acme> From Nathan Chancellor <>
acme> Subject [PATCH] mwifiex: Remove unnecessary braces from HostCmd_SET_SEQ_NO_BSS_INFO
acme>
acme> https://lkml.org/lkml/2020/9/1/135
acme>
acme> So perhaps in this case its better to disable that
acme> -Werror,-Wcompound-token-split-by-macro when building with clang?
Yes, I think that is probably the best solution. As far as I can tell,
at least in this file and context, the warning appears harmless, as the
"create a GNU C statement expression from two different macros" is very
much intentional, based on the presence of PERL_USE_GCC_BRACE_GROUPS.
The warning is fixed in upstream Perl by just avoiding creating GNU C
statement expressions using STMT_START and STMT_END:
https://github.com/Perl/perl5/issues/18780
https://github.com/Perl/perl5/pull/18984
If I am reading the source code correctly, an alternative to disabling
the warning would be specifying -DPERL_GCC_BRACE_GROUPS_FORBIDDEN but it
seems like that might end up impacting more than just this site,
according to the issue discussion above.
</quote>
Based-on-a-patch-by: Sedat Dilek <sedat.dilek@gmail.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # Debian/Selfmade LLVM-14 (x86-64)
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Fangrui Song <maskray@google.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Keeping <john@metanate.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Link: http://lore.kernel.org/lkml/YkxWcYzph5pC1EK8@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|