| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Test perf interface to kprobes: listing, adding and removing probes. It
is run as a part of perftool-testsuite_probe test case.
Signed-off-by: Veronika Molnarova <vmolnaro@redhat.com>
Signed-off-by: Michael Petlan <mpetlan@redhat.com>
Cc: kjain@linux.ibm.com
Cc: atrajeev@linux.vnet.ibm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240215110231.15385-7-mpetlan@redhat.com
|
|
As a form of validation, it is a common practice to check the outputs
of commands whether they contain expected patterns or match a certain
regex.
Add helpers for verifying that all regexes are found in the output, that
all lines match any pattern from a set and that a certain expression is
not present in the output.
In verbose mode these helpers log mismatches for easier failure
investigation.
Signed-off-by: Veronika Molnarova <vmolnaro@redhat.com>
Signed-off-by: Michael Petlan <mpetlan@redhat.com>
Cc: kjain@linux.ibm.com
Cc: atrajeev@linux.vnet.ibm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240215110231.15385-6-mpetlan@redhat.com
|
|
Add new perf probe test case that acts as an entry element in perf test
list. Runs multiple subtests from directory "base_probe", which will be
added in incomming patches and can be expanded without further editing.
Signed-off-by: Veronika Molnarova <vmolnaro@redhat.com>
Signed-off-by: Michael Petlan <mpetlan@redhat.com>
Cc: kjain@linux.ibm.com
Cc: atrajeev@linux.vnet.ibm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240215110231.15385-5-mpetlan@redhat.com
|
|
Initialize reporting and logging functions that unifies formatting
of the test output used for shell tests.
Signed-off-by: Veronika Molnarova <vmolnaro@redhat.com>
Signed-off-by: Michael Petlan <mpetlan@redhat.com>
Cc: kjain@linux.ibm.com
Cc: atrajeev@linux.vnet.ibm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240215110231.15385-4-mpetlan@redhat.com
|
|
Add settings defining sample commands later shared by shell tests. This
adds the possibility to globally adjust the default values for the whole
testsuite.
Signed-off-by: Veronika Molnarova <vmolnaro@redhat.com>
Signed-off-by: Michael Petlan <mpetlan@redhat.com>
Cc: kjain@linux.ibm.com
Cc: atrajeev@linux.vnet.ibm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240215110231.15385-3-mpetlan@redhat.com
|
|
Unify perf regexes for checking testing output into a single file
to reduce duplicates and prevent errors when editing.
This will be used in upcomming patches in shell tests.
Signed-off-by: Veronika Molnarova <vmolnaro@redhat.com>
Signed-off-by: Michael Petlan <mpetlan@redhat.com>
Cc: kjain@linux.ibm.com
Cc: atrajeev@linux.vnet.ibm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240215110231.15385-2-mpetlan@redhat.com
|
|
The test needs a struct machine and creates one for the current host,
but a side-effect is that struct machine has set up kernel maps
including module maps.
If the 'Symbols' test --dso option specifies a current kernel module,
it will already be present as a kernel dso, and a map with kmaps needs
to be used otherwise there will be a segfault - see below.
For that case, find the existing map and use that. In that case also,
the dso is split by section into multiple dsos, so test those dsos
also. That in turn, shows up that those dsos have not had overlapping
symbols removed, so the test fails.
Example:
Before:
$ perf test -F -v Symbols --dso /lib/modules/$(uname -r)/kernel/arch/x86/kvm/kvm-intel.ko
70: Symbols :
--- start ---
Testing /lib/modules/6.7.2-local/kernel/arch/x86/kvm/kvm-intel.ko
Segmentation fault (core dumped)
After:
$ perf test -F -v Symbols --dso /lib/modules/$(uname -r)/kernel/arch/x86/kvm/kvm-intel.ko
70: Symbols :
--- start ---
Testing /lib/modules/6.7.2-local/kernel/arch/x86/kvm/kvm-intel.ko
Overlapping symbols:
41d30-41fbb l vmx_init
41d30-41fbb g init_module
---- end ----
Symbols: FAILED!
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240131192416.16387-1-adrian.hunter@intel.com
|
|
The target is to allow the tool to always enable the perf register
feature for native parsing and cross parsing, and current code doesn't
depend on the macro 'HAVE_PERF_REGS_SUPPORT'.
This patch remove the variable 'NO_PERF_REGS' and the defined macro
'HAVE_PERF_REGS_SUPPORT' from the Makefile.
Signed-off-by: Leo Yan <leo.yan@linux.dev>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Ming Wang <wangming01@loongson.cn>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: linux-csky@vger.kernel.org
Cc: linux-riscv@lists.infradead.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240214113947.240957-5-leo.yan@linux.dev
|
|
Every architecture can provide a register list for sampling. If an
architecture doesn't support register sampling, it won't define the data
structure 'sample_reg_masks'. Consequently, any code using this
structure must be protected by the macro 'HAVE_PERF_REGS_SUPPORT'.
This patch defines a weak function, arch__sample_reg_masks(), which will
be replaced by an architecture-defined function for returning the
architecture's register list. With this refactoring, the function always
exists, the condition checking for 'HAVE_PERF_REGS_SUPPORT' is not
needed anymore, so remove it.
Signed-off-by: Leo Yan <leo.yan@linux.dev>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Ming Wang <wangming01@loongson.cn>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: linux-csky@vger.kernel.org
Cc: linux-riscv@lists.infradead.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240214113947.240957-4-leo.yan@linux.dev
|
|
Currently, the macro HAVE_PERF_REGS_SUPPORT is used as a switch to turn
on or turn off the code of perf registers. If any architecture cannot
support perf register, it disables the perf register parsing, for both
the native parsing and cross parsing for other architectures.
To support both the native parsing and cross parsing, the tool should
always build the perf regs functions. Thus, this patch removes
HAVE_PERF_REGS_SUPPORT from the perf regs files.
Signed-off-by: Leo Yan <leo.yan@linux.dev>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Ming Wang <wangming01@loongson.cn>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: linux-csky@vger.kernel.org
Cc: linux-riscv@lists.infradead.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240214113947.240957-3-leo.yan@linux.dev
|
|
CONFIG_PERF_REGS is not used, remove it.
Signed-off-by: Leo Yan <leo.yan@linux.dev>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Ming Wang <wangming01@loongson.cn>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: linux-csky@vger.kernel.org
Cc: linux-riscv@lists.infradead.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240214113947.240957-2-leo.yan@linux.dev
|
|
Counts were switched from the scaled saved value form to the
aggregated count to avoid double accounting. When this happened the
removing of scaling for a count should have been removed, however, it
wasn't and this wasn't observed as it normally doesn't matter because
a counter's scale is 1. A problem was observed with RAPL events that
are scaled.
Fixes: 37cc8ad77cf8 ("perf metric: Directly use counts rather than saved_value")
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: James Clark <james.clark@arm.com>
Cc: Kaige Ye <ye@kaige.org>
Cc: John Garry <john.g.garry@oracle.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240209204947.3873294-5-irogers@google.com
|
|
Cycles is recognized as part of a hard coded metric in stat-shadow.c,
it may call print_metric_only with a NULL fmt string leading to a
segfault. Handle the NULL fmt explicitly.
Fixes: 088519f318be ("perf stat: Move the display functions to stat-display.c")
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: James Clark <james.clark@arm.com>
Cc: Kaige Ye <ye@kaige.org>
Cc: John Garry <john.g.garry@oracle.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240209204947.3873294-4-irogers@google.com
|
|
Events in metrics cannot use '/' as a separator, it would be
recognized as a divide, so they use '@'. The '@' is recognized in the
metricgroups code and changed to '/', do the same in the has_event
function so that the parsing is only tried without the @s.
Fixes: 4a4a9bf9075f ("perf expr: Add has_event function")
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: James Clark <james.clark@arm.com>
Cc: Kaige Ye <ye@kaige.org>
Cc: John Garry <john.g.garry@oracle.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240209204947.3873294-3-irogers@google.com
|
|
Currently only floating point numbers can be parsed, add a special
case for NaN.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: James Clark <james.clark@arm.com>
Cc: Kaige Ye <ye@kaige.org>
Cc: John Garry <john.g.garry@oracle.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240209204947.3873294-2-irogers@google.com
|
|
After this change maps__nr_maps is only used by tests, existing users
are migrated to maps__empty. Compute maps__empty under the read lock.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: James Clark <james.clark@arm.com>
Cc: Vincent Whitchurch <vincent.whitchurch@axis.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Song Liu <song@kernel.org>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Artem Savkov <asavkov@redhat.com>
Cc: bpf@vger.kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240210031746.4057262-7-irogers@google.com
|
|
Move the struct into the C file. Add maps__equal to work around
exposing the struct for reference count checking. Add accessors for
the unwind_libunwind_ops. Move maps_list_node to its only use in
symbol.c.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: James Clark <james.clark@arm.com>
Cc: Vincent Whitchurch <vincent.whitchurch@axis.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Song Liu <song@kernel.org>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Artem Savkov <asavkov@redhat.com>
Cc: bpf@vger.kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240210031746.4057262-6-irogers@google.com
|
|
Finding a map is done under a lock, returning the map without a
reference count means it can be removed without notice and causing
uses after free. Grab a reference count to the map within the lock
region and return this. Fix up locations that need a map__put
following this.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: James Clark <james.clark@arm.com>
Cc: Vincent Whitchurch <vincent.whitchurch@axis.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Song Liu <song@kernel.org>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Artem Savkov <asavkov@redhat.com>
Cc: bpf@vger.kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240210031746.4057262-5-irogers@google.com
|
|
Finding a map is done under a lock, returning the map without a
reference count means it can be removed without notice and causing
uses after free. Grab a reference count to the map within the lock
region and return this. Fix up locations that need a map__put
following this. Also fix some reference counted pointer comparisons.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: James Clark <james.clark@arm.com>
Cc: Vincent Whitchurch <vincent.whitchurch@axis.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Song Liu <song@kernel.org>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Artem Savkov <asavkov@redhat.com>
Cc: bpf@vger.kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240210031746.4057262-4-irogers@google.com
|
|
Finding a map is done under a lock, returning the map without a
reference count means it can be removed without notice and causing
uses after free. Grab a reference count to the map within the lock
region and return this. Fix up locations that need a map__put
following this.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: James Clark <james.clark@arm.com>
Cc: Vincent Whitchurch <vincent.whitchurch@axis.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Song Liu <song@kernel.org>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Artem Savkov <asavkov@redhat.com>
Cc: bpf@vger.kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240210031746.4057262-3-irogers@google.com
|
|
Maps is a collection of maps primarily sorted by the starting address
of the map. Prior to this change the maps were held in an rbtree
requiring 4 pointers per node. Prior to reference count checking, the
rbnode was embedded in the map so 3 pointers per node were
necessary. This change switches the rbtree to an array lazily sorted
by address, much as the array sorting nodes by name. 1 pointer is
needed per node, but to avoid excessive resizing the backing array may
be twice the number of used elements. Meaning the memory overhead is
roughly half that of the rbtree. For a perf record with
"--no-bpf-event -g -a" of true, the memory overhead of perf inject is
reduce fom 3.3MB to 3MB, so 10% or 300KB is saved.
Map inserts always happen at the end of the array. The code tracks
whether the insertion violates the sorting property. O(log n) rb-tree
complexity is switched to O(1).
Remove slides the array, so O(log n) rb-tree complexity is degraded to
O(n).
A find may need to sort the array using qsort which is O(n*log n), but
in general the maps should be sorted and so average performance should
be O(log n) as with the rbtree.
An rbtree node consumes a cache line, but with the array 4 nodes fit
on a cache line. Iteration is simplified to scanning an array rather
than pointer chasing.
Overall it is expected the performance after the change should be
comparable to before, but with half of the memory consumed.
To avoid a list and repeated logic around splitting maps,
maps__merge_in is rewritten in terms of
maps__fixup_overlap_and_insert. maps_merge_in splits the given mapping
inserting remaining gaps. maps__fixup_overlap_and_insert splits the
existing mappings, then adds the incoming mapping. By adding the new
mapping first, then re-inserting the existing mappings the splitting
behavior matches.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: James Clark <james.clark@arm.com>
Cc: Vincent Whitchurch <vincent.whitchurch@axis.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Song Liu <song@kernel.org>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Artem Savkov <asavkov@redhat.com>
Cc: bpf@vger.kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240210031746.4057262-2-irogers@google.com
|
|
To get some fixes in the perf test and JSON metrics into the development
branch.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
The child_process for addr2line sets in and out to -1 so that pipes
get created. It is the caller's responsibility to close the pipes,
finish_command doesn't do it. Add the missed closes.
Fixes: b3801e791231 ("perf srcline: Simplify addr2line subprocess")
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: James Clark <james.clark@arm.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Tom Rix <trix@redhat.com>
Cc: llvm@lists.linux.dev
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240201001504.1348511-8-irogers@google.com
|
|
Some platforms have 'cluster' topology and CPUs in the cluster will
share resources like L3 Cache Tag (for HiSilicon Kunpeng SoC) or L2
cache (for Intel Jacobsville). Currently parsing and building cluster
topology have been supported since [1].
perf stat has already supported aggregation for other topologies like
die or socket, etc. It'll be useful to aggregate per-cluster to find
problems like L3T bandwidth contention.
This patch add support for "--per-cluster" option for per-cluster
aggregation. Also update the docs and related test. The output will
be like:
[root@localhost tmp]# perf stat -a -e LLC-load --per-cluster -- sleep 5
Performance counter stats for 'system wide':
S56-D0-CLS158 4 1,321,521,570 LLC-load
S56-D0-CLS594 4 794,211,453 LLC-load
S56-D0-CLS1030 4 41,623 LLC-load
S56-D0-CLS1466 4 41,646 LLC-load
S56-D0-CLS1902 4 16,863 LLC-load
S56-D0-CLS2338 4 15,721 LLC-load
S56-D0-CLS2774 4 22,671 LLC-load
[...]
On a legacy system without cluster or cluster support, the output will
be look like:
[root@localhost perf]# perf stat -a -e cycles --per-cluster -- sleep 1
Performance counter stats for 'system wide':
S56-D0-CLS0 64 18,011,485 cycles
S7182-D0-CLS0 64 16,548,835 cycles
Note that this patch doesn't mix the cluster information in the outputs
of --per-core to avoid breaking any tools/scripts using it.
Note that perf recently supports "--per-cache" aggregation, but it's not
the same with the cluster although cluster CPUs may share some cache
resources. For example on my machine all clusters within a die share the
same L3 cache:
$ cat /sys/devices/system/cpu/cpu0/cache/index3/shared_cpu_list
0-31
$ cat /sys/devices/system/cpu/cpu0/topology/cluster_cpus_list
0-3
[1] commit c5e22feffdd7 ("topology: Represent clusters of CPUs within a die")
Tested-by: Jie Zhan <zhanjie9@hisilicon.com>
Reviewed-by: Tim Chen <tim.c.chen@linux.intel.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Cc: james.clark@arm.com
Cc: 21cnbao@gmail.com
Cc: prime.zeng@hisilicon.com
Cc: Jonathan.Cameron@huawei.com
Cc: fanghao11@huawei.com
Cc: linuxarm@huawei.com
Cc: tim.c.chen@intel.com
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240208024026.2691-1-yangyicong@huawei.com
|
|
When it converts sample IP to or from objdump-capable one, there's a
comment saying that kernel modules have DSO_SPACE__USER. But commit
02213cec64bb ("perf maps: Mark module DSOs with kernel type") changed
it and makes the comment confusing. Let's get rid of it.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20240208181025.1329645-1-namhyung@kernel.org
|
|
slist needs to be freed in both error path and normal path in
thread_map__new_by_tid_str().
Fixes: b52956c961be3a04 ("perf tools: Allow multiple threads or processes in record, stat, top")
Reviewed-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240206083228.172607-6-yangjihong1@huawei.com
|
|
perf_sched__{lat|map|replay}()
The curr_pid and cpu_last_switched are used only for the
'perf sched replay/latency/map'. Put their initialization in
perf_sched__{lat|map|replay () to reduce unnecessary actions in other
commands.
Simple functional testing:
# perf sched record perf bench sched messaging
# Running 'sched/messaging' benchmark:
# 20 sender and receiver processes per group
# 10 groups == 400 processes run
Total time: 0.209 [sec]
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 16.456 MB perf.data (147907 samples) ]
# perf sched lat
-------------------------------------------------------------------------------------------------------------------------------------------
Task | Runtime ms | Switches | Avg delay ms | Max delay ms | Max delay start | Max delay end |
-------------------------------------------------------------------------------------------------------------------------------------------
sched-messaging:(401) | 2990.699 ms | 38705 | avg: 0.661 ms | max: 67.046 ms | max start: 456532.624830 s | max end: 456532.691876 s
qemu-system-x86:(7) | 179.764 ms | 2191 | avg: 0.152 ms | max: 21.857 ms | max start: 456532.576434 s | max end: 456532.598291 s
sshd:48125 | 0.522 ms | 2 | avg: 0.037 ms | max: 0.046 ms | max start: 456532.514610 s | max end: 456532.514656 s
<SNIP>
ksoftirqd/11:82 | 0.063 ms | 1 | avg: 0.005 ms | max: 0.005 ms | max start: 456532.769366 s | max end: 456532.769371 s
kworker/9:0-mm_:34624 | 0.233 ms | 20 | avg: 0.004 ms | max: 0.007 ms | max start: 456532.690804 s | max end: 456532.690812 s
migration/13:93 | 0.000 ms | 1 | avg: 0.004 ms | max: 0.004 ms | max start: 456532.512669 s | max end: 456532.512674 s
-----------------------------------------------------------------------------------------------------------------
TOTAL: | 3180.750 ms | 41368 |
---------------------------------------------------
# echo $?
0
# perf sched map
*A0 456532.510141 secs A0 => migration/0:15
*. 456532.510171 secs . => swapper:0
. *B0 456532.510261 secs B0 => migration/1:21
. *. 456532.510279 secs
<SNIP>
L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 *L7 . . . . 456532.785979 secs
L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 *L7 . . . 456532.786054 secs
L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 *L7 . . 456532.786127 secs
L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 *L7 . 456532.786197 secs
L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 *L7 456532.786270 secs
# echo $?
0
# perf sched replay
run measurement overhead: 108 nsecs
sleep measurement overhead: 66473 nsecs
the run test took 1000002 nsecs
the sleep test took 1082686 nsecs
nr_run_events: 49334
nr_sleep_events: 50054
nr_wakeup_events: 34701
target-less wakeups: 165
multi-target wakeups: 766
task 0 ( swapper: 0), nr_events: 15419
task 1 ( swapper: 1), nr_events: 1
task 2 ( swapper: 2), nr_events: 1
<SNIP>
task 715 ( sched-messaging: 110248), nr_events: 1438
task 716 ( sched-messaging: 110249), nr_events: 512
task 717 ( sched-messaging: 110250), nr_events: 500
task 718 ( sched-messaging: 110251), nr_events: 537
task 719 ( sched-messaging: 110252), nr_events: 823
------------------------------------------------------------
#1 : 1325.288, ravg: 1325.29, cpu: 7823.35 / 7823.35
#2 : 1363.606, ravg: 1329.12, cpu: 7655.53 / 7806.56
#3 : 1349.494, ravg: 1331.16, cpu: 7544.80 / 7780.39
#4 : 1311.488, ravg: 1329.19, cpu: 7495.13 / 7751.86
#5 : 1309.902, ravg: 1327.26, cpu: 7266.65 / 7703.34
#6 : 1309.535, ravg: 1325.49, cpu: 7843.86 / 7717.39
#7 : 1316.482, ravg: 1324.59, cpu: 7854.41 / 7731.09
#8 : 1366.604, ravg: 1328.79, cpu: 7955.81 / 7753.57
#9 : 1326.286, ravg: 1328.54, cpu: 7466.86 / 7724.90
#10 : 1356.653, ravg: 1331.35, cpu: 7566.60 / 7709.07
# echo $?
0
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240206083228.172607-5-yangjihong1@huawei.com
|
|
The curr_thread is used only for the 'perf sched map'. Put initialization
in perf_sched__map() to reduce unnecessary actions in other commands.
Simple functional testing:
# perf sched record perf bench sched messaging
# Running 'sched/messaging' benchmark:
# 20 sender and receiver processes per group
# 10 groups == 400 processes run
Total time: 0.197 [sec]
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 15.526 MB perf.data (140095 samples) ]
# perf sched map
*A0 451264.532445 secs A0 => migration/0:15
*. 451264.532468 secs . => swapper:0
. *B0 451264.532537 secs B0 => migration/1:21
. *. 451264.532560 secs
. . *C0 451264.532644 secs C0 => migration/2:27
. . *. 451264.532668 secs
. . . *D0 451264.532753 secs D0 => migration/3:33
. . . *. 451264.532778 secs
. . . . *E0 451264.532861 secs E0 => migration/4:39
. . . . *. 451264.532886 secs
. . . . . *F0 451264.532973 secs F0 => migration/5:45
<SNIP>
A7 A7 A7 A7 A7 *A7 . . . . . . . . . . 451264.790785 secs
A7 A7 A7 A7 A7 A7 *A7 . . . . . . . . . 451264.790858 secs
A7 A7 A7 A7 A7 A7 A7 *A7 . . . . . . . . 451264.790934 secs
A7 A7 A7 A7 A7 A7 A7 A7 *A7 . . . . . . . 451264.791004 secs
A7 A7 A7 A7 A7 A7 A7 A7 A7 *A7 . . . . . . 451264.791075 secs
A7 A7 A7 A7 A7 A7 A7 A7 A7 A7 *A7 . . . . . 451264.791143 secs
A7 A7 A7 A7 A7 A7 A7 A7 A7 A7 A7 *A7 . . . . 451264.791232 secs
A7 A7 A7 A7 A7 A7 A7 A7 A7 A7 A7 A7 *A7 . . . 451264.791336 secs
A7 A7 A7 A7 A7 A7 A7 A7 A7 A7 A7 A7 A7 *A7 . . 451264.791407 secs
A7 A7 A7 A7 A7 A7 A7 A7 A7 A7 A7 A7 A7 A7 *A7 . 451264.791484 secs
A7 A7 A7 A7 A7 A7 A7 A7 A7 A7 A7 A7 A7 A7 A7 *A7 451264.791553 secs
# echo $?
0
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240206083228.172607-4-yangjihong1@huawei.com
|
|
perf_sched__map() needs to free memory of map_cpus, color_pids and
color_cpus in normal path and rollback allocated memory in error path.
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240206083228.172607-3-yangjihong1@huawei.com
|
|
perf_sched__replay()
The start_work_mutex and work_done_wait_mutex are used only for the
'perf sched replay'. Put their initialization in perf_sched__replay () to
reduce unnecessary actions in other commands.
Simple functional testing:
# perf sched record perf bench sched messaging
# Running 'sched/messaging' benchmark:
# 20 sender and receiver processes per group
# 10 groups == 400 processes run
Total time: 0.197 [sec]
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 14.952 MB perf.data (134165 samples) ]
# perf sched replay
run measurement overhead: 108 nsecs
sleep measurement overhead: 65658 nsecs
the run test took 999991 nsecs
the sleep test took 1079324 nsecs
nr_run_events: 42378
nr_sleep_events: 43102
nr_wakeup_events: 31852
target-less wakeups: 17
multi-target wakeups: 712
task 0 ( swapper: 0), nr_events: 10451
task 1 ( swapper: 1), nr_events: 3
task 2 ( swapper: 2), nr_events: 1
<SNIP>
task 717 ( sched-messaging: 74483), nr_events: 152
task 718 ( sched-messaging: 74484), nr_events: 1944
task 719 ( sched-messaging: 74485), nr_events: 73
task 720 ( sched-messaging: 74486), nr_events: 163
task 721 ( sched-messaging: 74487), nr_events: 942
task 722 ( sched-messaging: 74488), nr_events: 78
task 723 ( sched-messaging: 74489), nr_events: 1090
------------------------------------------------------------
#1 : 1366.507, ravg: 1366.51, cpu: 7682.70 / 7682.70
#2 : 1410.072, ravg: 1370.86, cpu: 7723.88 / 7686.82
#3 : 1396.296, ravg: 1373.41, cpu: 7568.20 / 7674.96
#4 : 1381.019, ravg: 1374.17, cpu: 7531.81 / 7660.64
#5 : 1393.826, ravg: 1376.13, cpu: 7725.25 / 7667.11
#6 : 1401.581, ravg: 1378.68, cpu: 7594.82 / 7659.88
#7 : 1381.337, ravg: 1378.94, cpu: 7371.22 / 7631.01
#8 : 1373.842, ravg: 1378.43, cpu: 7894.92 / 7657.40
#9 : 1364.697, ravg: 1377.06, cpu: 7324.91 / 7624.15
#10 : 1363.613, ravg: 1375.72, cpu: 7209.55 / 7582.69
# echo $?
0
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240206083228.172607-2-yangjihong1@huawei.com
|
|
stat+std_output.sh test fails on my arm64 machine:
[root@localhost shell]# ./stat+std_output.sh
Checking STD output: no args Unknown event name in TopDownL1 # 0.18 retiring
[root@localhost shell]# ./stat+std_output.sh
Checking STD output: no args [Success]
Checking STD output: system wide [Success]
Checking STD output: interval [Success]
Checking STD output: per thread Unknown event name in tmux: server-1114960 # 0.41 frontend_bound
When no args specified `perf stat` will add TopdownL1 metric group
and the output will be like:
[root@localhost shell]# perf stat -- stress-ng --vm 1 --timeout 1
stress-ng: info: [3351733] setting to a 1 second run per stressor
stress-ng: info: [3351733] dispatching hogs: 1 vm
stress-ng: info: [3351733] successful run completed in 1.02s
Performance counter stats for 'stress-ng --vm 1 --timeout 1':
1,037.71 msec task-clock # 1.000 CPUs utilized
13 context-switches # 12.528 /sec
1 cpu-migrations # 0.964 /sec
67,544 page-faults # 65.090 K/sec
2,691,932,561 cycles # 2.594 GHz (74.56%)
6,571,333,653 instructions # 2.44 insn per cycle (74.92%)
521,863,142 branches # 502.901 M/sec (75.21%)
425,879 branch-misses # 0.08% of all branches (87.57%)
TopDownL1 # 0.61 retiring (87.67%)
# 0.03 frontend_bound (87.67%)
# 0.02 bad_speculation (87.67%)
# 0.34 backend_bound (74.61%)
1.038138390 seconds time elapsed
0.844849000 seconds user
0.189053000 seconds sys
Metrics in group TopDownL1 don't have event name on arm64 but are not
listed in the $skip_metric list which they should be listed. Add them
to the skip list as what does for x86 platforms in [1].
[1] commit 4d60e83dfcee ("perf test: Skip metrics w/o event name in stat STD output linter")
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: linuxarm@huawei.com
Cc: kan.liang@linux.intel.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240207091222.54096-1-yangyicong@huawei.com
|
|
Currently perf does not record module section addresses except for
the .text section. In general that means perf cannot get module section
mappings correct (except for .text) when loading symbols from a kernel
module file. (Note using --kcore does not have this issue)
Improve that situation slightly by identifying executable sections that
use the same mapping as the .text section. That happens when an
executable section comes directly after the .text section, both in memory
and on file, something that can be determined by following the same layout
rules used by the kernel, refer kernel layout_sections(). Note whether
that happens is somewhat arbitrary, so this is not a final solution.
Example from tracing a virtual machine process:
Before:
$ perf script | grep unknown
CPU 0/KVM 1718 203.511270: 318341 cpu-cycles:P: ffffffffc13e8a70 [unknown] (/lib/modules/6.7.2-local/kernel/arch/x86/kvm/kvm-intel.ko)
$ perf script -vvv 2>&1 >/dev/null | grep kvm.intel | grep 'noinstr.text\|ffff'
Map: 0-7e0 41430 [kvm_intel].noinstr.text
Map: ffffffffc13a7000-ffffffffc1421000 a0 /lib/modules/6.7.2-local/kernel/arch/x86/kvm/kvm-intel.ko
After:
$ perf script | grep 203.511270
CPU 0/KVM 1718 203.511270: 318341 cpu-cycles:P: ffffffffc13e8a70 vmx_vmexit+0x0 (/lib/modules/6.7.2-local/kernel/arch/x86/kvm/kvm-intel.ko)
$ perf script -vvv 2>&1 >/dev/null | grep kvm.intel | grep 'noinstr.text\|ffff'
Map: ffffffffc13a7000-ffffffffc1421000 a0 /lib/modules/6.7.2-local/kernel/arch/x86/kvm/kvm-intel.ko
Reported-by: Like Xu <like.xu.linux@gmail.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240208085326.13432-3-adrian.hunter@intel.com
|
|
Dump kmaps if using 'perf --debug kmaps' or verbose > 2 (e.g. -vvv) for
tools 'perf script' and 'perf report' if there is no browser.
Example:
$ perf --debug kmaps script 2>&1 >/dev/null | grep kvm.intel
build id event received for /lib/modules/6.7.2-local/kernel/arch/x86/kvm/kvm-intel.ko: 0691d75e10e72ebbbd45a44c59f6d00a5604badf [20]
Map: 0-3a3 4f5d8 [kvm_intel].modinfo
Map: 0-5240 5f280 [kvm_intel]__versions
Map: 0-30 64 [kvm_intel].note.Linux
Map: 0-14 644c0 [kvm_intel].orc_header
Map: 0-5297 43680 [kvm_intel].rodata
Map: 0-5bee 3b837 [kvm_intel].text.unlikely
Map: 0-7e0 41430 [kvm_intel].noinstr.text
Map: 0-2080 713c0 [kvm_intel].bss
Map: 0-26 705c8 [kvm_intel].data..read_mostly
Map: 0-5888 6a4c0 [kvm_intel].data
Map: 0-22 70220 [kvm_intel].data.once
Map: 0-40 705f0 [kvm_intel].data..percpu
Map: 0-1685 41d20 [kvm_intel].init.text
Map: 0-4b8 6fd60 [kvm_intel].init.data
Map: 0-380 70248 [kvm_intel]__dyndbg
Map: 0-8 70218 [kvm_intel].exit.data
Map: 0-438 4f980 [kvm_intel]__param
Map: 0-5f5 4ca0f [kvm_intel].rodata.str1.1
Map: 0-3657 493b8 [kvm_intel].rodata.str1.8
Map: 0-e0 70640 [kvm_intel].data..ro_after_init
Map: 0-500 70ec0 [kvm_intel].gnu.linkonce.this_module
Map: ffffffffc13a7000-ffffffffc1421000 a0 /lib/modules/6.7.2-local/kernel/arch/x86/kvm/kvm-intel.ko
The example above shows how the module section mappings are all wrong
except for the main .text mapping at 0xffffffffc13a7000.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Like Xu <like.xu.linux@gmail.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240208085326.13432-2-adrian.hunter@intel.com
|
|
Currently pipe mode doesn't set the file size and it results in a
misleading message of 0 data size at the end. Although it might miss
some accounting for pipe header or more, just displaying the data size
would reduce the possible confusion.
Before:
$ perf record -o- perf test -w noploop | perf report -i- -q --percent-limit=1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.000 MB - ] <====== (here)
99.58% perf perf [.] noploop
After:
$ perf record -o- perf test -w noploop | perf report -i- -q --percent-limit=1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.229 MB - ]
99.46% perf perf [.] noploop
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20240112231340.779469-1-namhyung@kernel.org
|
|
With the srcline option, the perf script only prints a source line at
the beginning of a sample with call/ret from functions, but not for
each jump in brstackinsn. It's useful to print a source line for each
jump in brstackinsn when the end user analyze the full assembler
sequences of branch sequences for the sample.
The srccode option can also be used to locate the source code line.
However, it's printed almost for every line and makes the output less
readable.
$perf script -F +brstackinsn,+srcline --xed
Before the patch,
tchain_edit_deb 1463275 15228549.107820: 282495 instructions:u: 401133 f3+0xd (/home/kan/os.li>
tchain_edit.c:22
f3+40: tchain_edit.c:20
000000000040114e jle 0x401133 # PRED 6 cycles [6]
0000000000401133 movl -0x4(%rbp), %eax
0000000000401136 and $0x1, %eax
0000000000401139 test %eax, %eax
000000000040113b jz 0x401143
000000000040113d addl $0x1, -0x4(%rbp)
0000000000401141 jmp 0x401147 # PRED 3 cycles [9] 2.00 IPC
0000000000401147 cmpl $0x3e7, -0x4(%rbp)
000000000040114e jle 0x401133 # PRED 6 cycles [15] 0.33 IPC
After the patch,
tchain_edit_deb 1463275 15228549.107820: 282495 instructions:u: 401133 f3+0xd (/home/kan/os.li>
tchain_edit.c:22
f3+40: tchain_edit.c:20
000000000040114e jle 0x401133 srcline: tchain_edit.c:20 # PRED 6 cycles [6]
0000000000401133 movl -0x4(%rbp), %eax
0000000000401136 and $0x1, %eax
0000000000401139 test %eax, %eax
000000000040113b jz 0x401143
000000000040113d addl $0x1, -0x4(%rbp)
0000000000401141 jmp 0x401147 srcline: tchain_edit.c:23 # PRED 3 cycles [9] 2.00 IPC
0000000000401147 cmpl $0x3e7, -0x4(%rbp)
000000000040114e jle 0x401133 srcline: tchain_edit.c:20 # PRED 6 cycles [15] 0.33 IPC
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: ahmad.yasin@intel.com
Cc: amiri.khalil@intel.com
Cc: ak@linux.intel.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240205145819.1943114-1-kan.liang@linux.intel.com
|
|
Updates to struct parse_events_error needed to be carried through to
PowerPC specific event parsing.
Fixes: fd7b8e8fb20f ("perf parse-events: Print all errors")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung <namhyung@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240206235902.2917395-1-irogers@google.com
|
|
Update the Power11 PVR to json mapfile to enable
json events. Power11 is PowerISA v3.1 compliant
and support Power10 events.
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Cc: atrajeev@linux.vnet.ibm.com
Cc: disgoel@linux.vnet.ibm.com
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240129120855.551529-1-maddy@linux.ibm.com
|
|
perf script exposes the evsel_name to python scripts as part of the data
passed to the sample or tracepoint handler function, and it passes the id and
stream_id to the throttled/unthrottled handler functions. This makes matching
throttle events and samples difficult.
To make this possible, this change exposes the sample id and stream_id values
to the script.
Signed-off-by: Ben Gainey <ben.gainey@arm.com>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: will@kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240123103137.1890779-2-ben.gainey@arm.com
|
|
When building perf with BPF skels we either copy the minimalistic
tools/perf/util/bpf_skel/vmlinux/vmlinux.h or use bpftool to generate a
vmlinux from BTF, storing the result in $(SKEL_OUT)/vmlinux.h.
We need to remove that when doing a 'make -C tools/perf clean', fix it.
Fixes: b7a2d774c9c5a9a3 ("perf build: Add ability to build with a generated vmlinux.h")
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: bpf@vger.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/Zbz89KK5wHfZ82jv@x1
|
|
Prior to this patch '0' would be dropped as the config values default
to 0. Some json values are hex and the string '0' wouldn't match '0x0'
as zero. Add a more robust is_zero test to drop these event terms.
When encoding numbers as hex, if the number is between 0 and 9
inclusive then don't add a 0x prefix.
Update test expectations for these changes.
On x86 this reduces the event/metric C string by 58,411 bytes.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Edward Baker <edward.baker@intel.com>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Veronika Molnarova <vmolnaro@redhat.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240131201429.792138-1-irogers@google.com
|
|
Prior to this patch the first and the last error encountered during
parsing are printed. To see other errors verbose needs
enabling. Unfortunately this can drop useful errors, in particular on
terms. This patch changes the errors so that instead of the first and
last all errors are recorded and printed, the underlying data
structure is changed to a list.
Before:
```
$ perf stat -e 'slots/edge=2/' true
event syntax error: 'slots/edge=2/'
\___ Bad event or PMU
Unable to find PMU or event on a PMU of 'slots'
Initial error:
event syntax error: 'slots/edge=2/'
\___ Cannot find PMU `slots'. Missing kernel support?
Run 'perf list' for a list of valid events
Usage: perf stat [<options>] [<command>]
-e, --event <event> event selector. use 'perf list' to list available events
```
After:
```
$ perf stat -e 'slots/edge=2/' true
event syntax error: 'slots/edge=2/'
\___ Bad event or PMU
Unable to find PMU or event on a PMU of 'slots'
event syntax error: 'slots/edge=2/'
\___ value too big for format (edge), maximum is 1
event syntax error: 'slots/edge=2/'
\___ Cannot find PMU `slots'. Missing kernel support?
Run 'perf list' for a list of valid events
Usage: perf stat [<options>] [<command>]
-e, --event <event> event selector. use 'perf list' to list available events
```
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: James Clark <james.clark@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: tchen168@asu.edu
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240131134940.593788-3-irogers@google.com
|
|
A PMU event/alias will have a set of format terms that replace it when
an event is parsed. The location of the terms is their position when
parsed for the event/alias either from sysfs or json. This location is
of little use when an event fails to parse as the error will be given
in terms of the location in the string of events parsed not the json
or sysfs string. Fix this by making the cloned terms location that of
the event/alias.
If a cloned term from an event/alias is invalid the bad format is hard
to determine from the error string. Add the name of the bad format
into the error string.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: James Clark <james.clark@arm.com>
Cc: tchen168@asu.edu
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240131134940.593788-2-irogers@google.com
|
|
It is assumed that debug statements always print a newline, fix two
missing ones.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: James Clark <james.clark@arm.com>
Cc: tchen168@asu.edu
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240131134940.593788-1-irogers@google.com
|
|
Add some (hopefully useful) hints to tips.txt
Also some minor corrections.
Would probably good to make it a reviewer rule that if generally useful
options are added the patch must add an example to tips.txt
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240131021352.151440-1-ak@linux.intel.com
|
|
The original test report was too complicated to read with information
that not really useful. This new update simplify the report which should
largely improve the readibility.
Signed-off-by: Weilin Wang <weilin.wang@intel.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Samantha Alt <samantha.alt@intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240130180907.639729-1-weilin.wang@intel.com
|
|
Prevent a perf report segfault with the (non sensical) --no-parent
option
Signed-off-By: Andi Kleen <ak@linux.intel.com>
Acked-by: Namhyung <namhyung@kernel.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240130185552.150578-1-ak@linux.intel.com
|
|
data->id has been initialized at line 2362, remove duplicate initialization.
Fixes: 3ad31d8a0df2 ("perf evsel: Centralize perf_sample initialization")
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Reviewed-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240127025756.4041808-1-yangjihong1@huawei.com
|
|
Since get_states() assumes the existence of libtraceevent, so move
to where it should belong, i.e, util/trace-event-parse.c, and also
rename it to parse_task_states().
Leave evsel_getstate() untouched as it fits well in the evsel
category.
Also make some necessary tweaks for python support, and get it
verified with: perf test python.
Signed-off-by: Ze Gao <zegao@tencent.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240123070210.1669843-2-zegao@tencent.com
|
|
sources
To pick up the changes in:
1ab33c03145d0f6c ("asm-generic: make sparse happy with odd-sized put_unaligned_*()")
Addressing this perf tools build warning:
Warning: Kernel ABI header differences:
diff -u tools/include/asm-generic/unaligned.h include/asm-generic/unaligned.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/Zbp9I7rmFj1Owhug@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To pick the changes from:
35e27a5744131996 ("fs: keep struct mnt_id_req extensible")
b4c2bea8ceaa50cd ("add listmount(2) syscall")
46eae99ef73302f9 ("add statmount(2) syscall")
That doesn't change anything in tools this time as nothing that is
harvested by the beauty scripts got changed:
$ ls -1 tools/perf/trace/beauty/*mount*sh
tools/perf/trace/beauty/fsmount.sh
tools/perf/trace/beauty/mount_flags.sh
tools/perf/trace/beauty/move_mount_flags.sh
$
This addresses this perf build warning.
Warning: Kernel ABI header differences:
diff -u tools/include/uapi/linux/mount.h include/uapi/linux/mount.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/ZbkMiB7ZcOsLP2V5@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
Veronika Molnarova
Adrian Hunter
Leo Yan
Ian Rogers
Namhyung Kim
Yicong Yang
Yang Jihong
Kan Liang
Madhavan Srinivasan
Ben Gainey
Arnaldo Carvalho de Melo
Andi Kleen
Weilin Wang
Ze Gao
Arnaldo Carvalho de Melo
