Age | Commit message (Collapse) | Author | Files | Lines |
|
git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/dt
SoCFPGA dts updates for v6.3, part 2
- Add support for the enclustra PE1 board that is based on Arria10
* tag 'socfpga_dts_updates_for_v6.3_part2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
ARM: dts: socfpga: Add enclustra PE1 devicetree
dt-bindings: altera: Add enclustra mercury PE1
Link: https://lore.kernel.org/r/20230216160910.509065-1-dinguyen@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Add binding for the enclustra PE1 baseboard from enclustra GmbH.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt
More Qualcomm ARM32 DTS updates for 6.3
This adds backlight, notification LED, vibrator, volume keys and hall
sensor to the OnePlus One, and provides a range of Devicetree validation
fixes across various platforms.
* tag 'qcom-dts-for-6.3-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (22 commits)
ARM: dts: qcom: align OPP table names with DT schema
ARM: dts: qcom: msm8974-oneplus-bacon: Add notification LED
ARM: dts: qcom: msm8974-oneplus-bacon: Add backlight
ARM: dts: qcom: msm8974-oneplus-bacon: Add volume keys and hall sensor
ARM: dts: qcom: msm8974-oneplus-bacon: Add vibrator
ARM: dts: qcom: pm8941: Add vibrator node
ARM: dts: qcom: sdx55: correct TLMM gpio-ranges
dt-bindings: arm: qcom: add the sa8775p-ride board
ARM: dts: qcom: apq8064: add second DSI host and PHY
ARM: dts: qcom: apq8060-dragonboard: align MPP pin node names with DT schema
dt-bindings: arm: qcom: Add Xiaomi Mi Pad 5 Pro (xiaomi-elish)
ARM: dts: qcom-sdx65: align RPMh regulator nodes with bindings
ARM: dts: qcom-sdx55: align RPMh regulator nodes with bindings
ARM: dts: qcom: use "okay" for status
ARM: dts: qcom: sdx65: Add Qcom SMMU-500 as the fallback for IOMMU node
ARM: dts: qcom: sdx55: Add Qcom SMMU-500 as the fallback for IOMMU node
ARM: dts: qcom: apq8064: use hdmi_phy for the MMCC's hdmipll clock
ARM: dts: qcom: apq8064: add #clock-cells to the HDMI PHY node
ARM: dts: qcom: ipq8064: move reg-less nodes outside soc node
dt-bindings: qcom: Document msm8916-thwc-uf896 and ufi001c
...
Link: https://lore.kernel.org/r/20230210185846.2032601-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/dt
AT91 device tree updates for 6.3 #2
It contains:
- cleanups arround flexcom nodes on SAM9X60 SoC as follows:
- preserve same ID for flexcoms and the embedded nodes (e.g. flx4
will embed uart4, spi4, i2c4 but not e.g. uart1, spi2, i2c3);
- SoC specific bindings were moved from board specific file to SoC
specific file
- DMA bindings for all flexcom nodes were added
- SoC file was filled with missing flexcom nodes
- new SAM9X60 Curiosity board that contains 1 uSDcard interface, 1 SDcard
interface, 1 USB device interface, 2 USB Type-A interfaces, 2 CAN
interfaces, 1 10/100 Ethernet interface, 1 LCD RGB666 interface,
1 Gb DDR2, 4 Gb NAND Flash, 2Kb EEPROM, leds, button, power
regulators, UART and JTAG connectors
* tag 'at91-dt-6.3-2' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: dts: at91: sam9x60_curiosity: Add device tree for sam9x60 curiosity board
dt-bindings: arm: at91: Add info on sam9x60 curiosity
ARM: dts: at91: sam9x60: Add missing flexcom definitions
ARM: dts: at91: sam9x60: Add DMA bindings for the flexcom nodes
ARM: dts: at91: sam9x60: Specify the FIFO size for the Flexcom UART
ARM: dts: at91: sam9x60: fix spi4 node
ARM: dts: at91: sam9x60: move flexcom definitions
ARM: dts: at91: sam9x60: Fix the label numbering for the flexcom functions
Link: https://lore.kernel.org/r/20230209084930.289721-1-claudiu.beznea@microchip.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc into arm/dt
ASPEED device tree updates for 6.3
- New machines
* Ufispace NCPLite AST2600 BMC
* Facebook Greatlakes AST2600 BMC
- Updates for ethanolx, bletchley and tyan s8036
* tag 'aspeed-6.3-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc:
ARM: dts: aspeed: p10bmc: Enable UART2
ARM: dts: aspeed: Add device tree for Ufispace NCPLite BMC
dt-bindings: arm: aspeed: document Ufispace NCPLite BMC
dt-bindings: vendor-prefixes: Add prefix for Ufi Space
arm: dts: aspeed: tyan s8036: Enable kcs interrupts
ARM: dts: aspeed: bletchley: Enable wdtrst1
ARM: dts: aspeed: bletchley: Rename flash1 label
ARM: dts: aspeed: ethanolx: Add BIOS flash chip
ARM: dts: aspeed: ethanolx: Enable CTS/RTS pins on UART1
ARM: dts: aspeed: ethanolx: Add label for the master partition
ARM: dts: aspeed: ethanolx: Correct EEPROM device name
ARM: dts: aspeed: ethanolx: Enable VUART
ARM: dts: aspeed: greatlakes: Add Facebook greatlakes (AST2600) BMC
dt-bindings: arm: aspeed: add Facebook Greatlakes board
Link: https://lore.kernel.org/r/CACPK8XdbffU5yRSZF-zR2xv-+6aJK+hEXP8TOkW=SvS+nNTGxg@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Document the sa8775p SoC and its reference board: sa8775p-ride.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230201152038.203387-5-brgl@bgdev.pl
|
|
Add a compatible for Xiaomi Mi Pad 5 Pro.
Signed-off-by: Jianhua Lu <lujianhua000@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230131123515.833-1-lujianhua000@gmail.com
|
|
Document the new thwc,uf896/ufi001c device tree bindings used in their device
trees.
Signed-off-by: Yang Xiwen <forbidden405@foxmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Adding the sam9x60 curiosity board from Microchip into the atmel AT91 board
description yaml file.
Signed-off-by: Durai Manickam KR <durai.manickamkr@microchip.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20230207110651.197268-8-durai.manickamkr@microchip.com
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into arm/dt
TI K3 device tree updates for v6.3
New features:
J784S4 SoC and EVM support
AM68 and AM69 StarterKit, phyBOARD-Electra-AM642, Siemens IoT2050 M.2
AM62A7 SK additional peripherals
AM62 SK USB support
Non critical fixes
AM62:
McSPI Clock ID fixes
MMC TAP value updates
J7200:
pinmux range update
All:
Cache DT node fixes
Cleanups:
Reorder dts Makefile entries alphabetically
* tag 'ti-k3-dt-for-v6.3' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux: (25 commits)
arm64: dts: ti: Makefile: Rearrange entries alphabetically
arch: arm64: dts: Add support for AM69 Starter Kit
dt-bindings: arm: ti: Add binding for AM69 Starter Kit
arm64: dts: ti: iot2050: Add support for M.2 variant
dt-bindings: arm: ti: Add binding for Siemens IOT2050 M.2 variant
arm64: dts: ti: iot2050: Add layout of OSPI flash
arm64: dts: ti: k3-j7200: Fix wakeup pinmux range
arm64: dts: ti: k3-am68-sk: Add support for AM68 SK base board
arm64: dts: ti: Add initial support for AM68 SK System on Module
dt-bindings: arm: ti: Add binding for AM68 SK
arm64: dts: Update cache properties for ti
arm64: dts: ti: Add support for phyBOARD-Electra-AM642
dt-bindings: arm: ti: Add bindings for PHYTEC AM64x based hardware
arm64: dts: ti: k3-am62a7-sk: Enable USB1 node
arm64: dts: ti: k3-am62a7-sk: Enable ethernet port
arm64: dts: ti: k3-am62a-main: Add more peripheral nodes
arm64: dts: ti: k3-am62a-mcu: Add MCU domain peripherals
arm64: dts: ti: Add support for J784S4 EVM board
arm64: dts: ti: Add initial support for J784S4 SoC
dt-bindings: pinctrl: k3: Introduce pinmux definitions for J784s4
...
Link: https://lore.kernel.org/r/642cf238-43e5-d6fa-68b5-a9dfbc0277bf@ti.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Add compatibles for the Pro SKU of the sc7280 CRD boards
which come with a Pro variant of the qcard.
The Pro qcard variant has smps9 from pm8350c ganged up with
smps7 and smps8.
Signed-off-by: Rajendra Nayak <quic_rjendra@quicinc.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221216112918.1243-1-quic_rjendra@quicinc.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt
Two new 32bit SoC were added, the rv1126 and rk3128.
New boards are thr rk3128-eval-board, and a number of rv1126-based compute
modules from Edgeble AI.
Also included are some dt-binding improvements with relevant Acks from
maintainers when the changes touch these areas.
* tag 'v6.3-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
dt-bindings: phy: rename phy-rockchip-inno-usb2.yaml
dt-bindings: soc: rockchip: grf: add rockchip,rk3288-dp-phy.yaml
dt-bindings: phy: rockchip: convert rockchip-dp-phy.txt to yaml
ARM: dts: rockchip: Enable Ethernet on rv1126 Neu2-IO
ARM: dts: rockchip: Add Ethernet GMAC node for RV1126
ARM: dts: rockchip: Add ethernet rgmiim1 pin-control for rv1126
dt-bindings: arm: rockchip: Add Edgeble Neural Compute Module 6
ARM: dts: rockchip: add brcmf node to rk3066a-mk808
ARM: dts: rockchip: add space between label and nodename nfc pinctrl on rk3128
ARM: dts: rockchip: add rk3128-evb
ARM: dts: rockchip: add rk3128 soc dtsi
dt-bindings: arm: rockchip: Add Rockchip RK3128 Evaluation board
ARM: dts: rockchip: Add Edgeble Neural Compute Module 2(Neu2) IO board
ARM: dts: rockchip: Add Edgeble RV1126 Neural Compute Module 2(Neu2)
dt-bindings: arm: rockchip: Add Edgeble Neural Compute Module 2
dt-bindings: vendor-prefixes: Add Edgeble AI Technologies Pvt. Ltd.
ARM: dts: rockchip: Add Rockchip RV1126 SoC
ARM: dts: rockchip: Add Rockchip RV1126 pinctrl
dt-bindings: arm: rockchip: Add pmu compatible for rv1126
Link: https://lore.kernel.org/r/5651506.31r3eYUQgx@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt
New SoC supported is the rk3588.
New boards rk3588-evb1, EmbedFire Lubancat 1+2 (based on different SoCs),
a number of Radxa boards (rock-5a and -5b, compute module 3, cm3i e25),
OrangePi R1 plus and the Edgeble Neu6 SoM and baseboard.
A number of improvements for the Odroid Go (and its clones) including
touchscreen and display support, led and audio changes.
As well as some improvements for the rk356x, better gpu thermal values for
px30 and some minor improvement for rock3a, rock5a, rk3566-demo,
roc-rk3399-pc and bi-r2pro.
* tag 'v6.3-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (46 commits)
arm64: dts: rockchip: Correct the model name for Radxa E25
arm64: dts: rockchip: Drop unneeded model for Radxa CM3i
arm64: dts: rockchip: Add missing CM3i fallback compatible for Radxa E25
arm64: dts: rockchip: Fix compatible for Radxa CM3
arm64: dts: rockchip: rk3566: Enable WiFi, BT support for Radxa CM3
arm64: dts: rockchip: Enable Ethernet for Radxa CM3 IO
arm64: dts: rockchip: add display to RG503
arm64: dts: rockchip: add pinctrls for 16-bit/18-bit rgb interface to rk356x
arm64: dts: rockchip: Update eMMC, SD aliases for Radxa SBC boards
arm64: dts: rockchip: Update eMMC, SD aliases for Radxa SoM boards
arm64: dts: rockchip: Add Radxa Compute Module 3 IO board
arm64: dts: rockchip: Add rk3566 based Radxa Compute Module 3
dt-bindings: arm: rockchip: Add Radxa Compute Module 3
arm64: dts: rockchip: Fix RX delay for ethernet phy on rk3588s-rock5a
arm64: dts: rockchip: add Hynitron cst340 for Anbernic 353 series
arm64: dts: rockchip: Enable wifi module AP6398s for rk3566 box demo
arm64: dts: rockchip: rk3588: Add Edgeble Neu6 Model A IO
arm64: dts: rockchip: rk3588: Add Edgeble Neu6 Model A SoM
arm64: dts: rockchip: fix hdmi cec on rock-3a
arm64: dts: rockchip: assign rate to clk_rtc_32k on rk356x
...
Link: https://lore.kernel.org/r/6491956.DvuYhMxLoT@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/dt
mt7986:
- add USB host support
- add support for mmc, pcie
- add support for Bananpi R3
mt8173:
- switch to SMC watchdog for Acer Chromebook R13
- move panel under aux bus
mt8183:
- support detachable keyboards on kukui based Chromebooks
- describe 13 MHz clock correctly
- complete CPU cache information
mt8186:
- Add pm-domains, iommu, dsi
- describe 13 MHz clock correctly
- complete CPU cache information
- add crypto support for the eMMC
- add audio controler, DPI and ADSP mailbox support
- describe CPUs as a single cluster
mt8192:
- describe 13 MHz clock correctly
- complete CPU cache information
- enable display regulators, backlight, internal display and audio on
Acer Chromebook 514
- describe CPUs as a single cluster
mt8195:
- Add power domain to t-phy
- describe 13 MHz clock correctly
- complete CPU cache information
- enable audio for Acer Chromebook Spin 513
- add ethernet support for the demo board
- add JPG enconder and decoder device
- describe CPUs as a single cluster
Smaller changes for mt6795, mt7622, mt8516 and mt6358.
* tag 'v6.2-next-dts64' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: (58 commits)
arm64: dts: mediatek: mt8516: Fix the watchdog node name
arm64: dts: mediatek: mt7986: Fix watchdog compatible
arm64: dts: mediatek: mt8195: Fix watchdog compatible
arm64: dts: mediatek: mt8186: Fix watchdog compatible
arm64: dts: mt8173-elm: Switch to SMC watchdog
arm64: dts: mediatek: mt7622: Add missing pwm-cells to pwm node
arm64: dts: mt8192: Change idle states names to reflect actual function
arm64: dts: mt8186: Change idle states names to reflect actual function
arm64: dts: mt8195: Change idle states names to reflect actual function
arm64: dts: mt8186: Fix CPU map for single-cluster SoC
arm64: dts: mt8192: Fix CPU map for single-cluster SoC
arm64: dts: mt8195: Fix CPU map for single-cluster SoC
arm64: dts: mt8195: add jpeg decode device node
arm64: dts: mt8195: add jpeg encode device node
arm64: dts: mediatek: mt8183: drop double interrupts
arm64: dts: mediatek: mt7622: drop serial clock-names
arm64: dts: mt8195: Add efuse node to mt8195
arm64: dts: mt8183: jacuzzi: Move panel under aux-bus
arm64: dts: mediatek: mt8173-elm: Move display to ps8640 auxiliary bus
arm64: dts: mt8195: Add Ethernet controller
...
Link: https://lore.kernel.org/r/2eefe6d4-6ca3-dc5f-6a04-f4f3c49692dd@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
AM69 Starter Kit is a single board designed for TI AM69 SoC.
The AM69 SoC belongs to the K3 Multicore SoC architecture platform,
providing advanced system integration in automotive ADAS applications,
autonomous mobile robot and edge AI applications.
Add DT binding for AM69 Starter Kit.
Signed-off-by: Dasnavis Sabiya <sabiya.d@ti.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20230119132958.124435-2-sabiya.d@ti.com
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into arm/dt
Amlogic ARM64 DT changes for v6.3:
- Merge of immutable bindings branch with Reset & power domain binding
- New boards:
- Odroid-N2L (Smaller version of Odroid-N2+)
- BananaPi M2-Pro (Variant of BPI=M5 with on-board wifi)
- Radxa Zero2 (New version of Radza Zero with A311D SoC)
- Add DT node for the VIPNano-QI on the A311D
- DT bindings fixups covering all SoC families
- MAC address nodes
- ethernet PHY node name
- scpi & child node names
- SD/SDIO node name
- USB supply name
- invalid clock-names
- rng node name
- rtc node name
- ETH phy mux node name
- button & adc keys node name
- leds node names
- RK818 pmic properties
- remove CPU opps below 1GHz for G12A boards, like it was done for G12B/SM1
- Fix WiFi/Bt definition around P212 & Khadas VIM1
- Add audio node to P212
- Fix FAN trip definition to Odroid-HC4
- Fix gpio-fan gpios definition
- Permit Radxa Zero OTG on USB1
- Fix VDDIO_C enable gpio by using OPEN DRAIN flag
* tag 'amlogic-arm64-dt-for-v6.3' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux: (43 commits)
arm64: dts: meson: add support for Radxa Zero2
dt-bindings: arm: amlogic: add support for Radxa Zero2
arm64: dts: meson: add support for BananaPi M2-Pro
dt-bindings: arm: amlogic: add support for BananaPi M2-Pro
arm64: dts: meson: bananapi-m5: convert dts to dtsi
arm64: dts: meson: bananapi-m5: remove redundant status from sound node
arm64: dts: meson: bananapi-m5: switch VDDIO_C pin to OPEN_DRAIN
arm64: dts: meson: radxa-zero: allow usb otg mode
arm64: dts: meson-gxm-khadas-vim2: use gpio-fan matrix instead of an array
arm64: dts: meson-g12b-odroid: Add initial support for Hardkernel ODROID-N2L
arm64: dts: meson-g12b: move common node into new odroid.dtsi
dt-bindings: arm: amlogic: document Odroid-N2L
arm64: dts: amlogic: meson-sm1-odroid-hc4: fix active fan thermal trip
arm64: dts: meson: add audio playback to S905X-P212 dts
arm64: dts: meson: remove WiFi/BT nodes from Khadas VIM1
arm64: dts: meson: move pwm_ef node in P212 dtsi
arm64: dts: meson: add Broadcom WiFi to P212 dtsi
arm64: dts: amlogic: meson-g12b-odroid-go-ultra: fix rk818 pmic properties
arm64: dts: amlogic: meson-gxbb-kii-pro: fix led node name
arm64: dts: amlogic: meson-gxl-s905d-phicomm-n1: fix led node name
...
Link: https://lore.kernel.org/r/c1641ffd-71c9-9ac9-89d9-c22da4acea10@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt
i.MX DT bindings for 6.3:
- New board compatibles: Beacon EmbeddedWorks i.MX8M Plus kit,
DHCOM PDK2, PicoITX and DRC02, Enumerate Debix, Starterkit SK-iMX53,
verdin yavia carrier-board.
- Add vendor prefix for Polyhex Technology Co.
- A series from Krzysztof Kozlowski to fix up fsl,imx-gpc bindings.
- Add clock cells for imx8mp-hsio-blk-ctrl bindings.
- A series from Marek Vasut to shuffle i.MX8MM board entries.
- A couple changes from Stefan Wahren to update compatibles for i.MX28
based boards.
* tag 'imx-bindings-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
dt-bindings: arm: fsl: Add verdin yavia carrier-board
dt-bindings: arm: fsl: Add PDK2, PicoITX and DRC02 boards for the DHCOM i.MX6ULL SoM
dt-bindings: arm: Document the rest of i.MX28 based boards
dt-bindings: arm: fsl: Fix bindings for APF28Dev board
dt-bindings: power: fsl,imx-gpc: document interrupt-controller
dt-bindings: power: fsl,imx-gpc: correct compatibles
dt-bindings: power: fsl,imx-gpc: document fsl,imx6ul-gpc compatible
dt-bindings: arm: Add Beacon EmbeddedWorks i.MX8M Plus kit
dt-bindings: arm: Move i.MX8MM Cloos PHG Board to TQM entry
dt-bindings: arm: Split i.MX8M Plus DHCOM based boards
dt-bindings: arm: Split i.MX8M Mini NITROGEN SoM based boards
dt-bindings: arm: Move MX8Menlo board to i.MX8M Mini Toradex Verdin SoM entry
dt-bindings: soc: imx: add IOMUXC GPR support
dt-bindings: arm: fsl: Add the Starterkit SK-iMX53 board
dt-bindings: vendor-prefixes: add Startkit
dt-bindings: soc: imx8mp-hsio-blk-ctrl: add clock cells
dt-bindings: arm: fsl: Enumerate Debix Model A Board
dt-bindings: vendor-prefixes: Add Polyhex Technology Co.
Link: https://lore.kernel.org/r/20230130023947.11780-3-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt
Samsung DTS ARM changes for v6.3
1. Big cleanup and rework towards achieving zero-warning of dtbs_check
and dtc W=1:
- align node names with the bindings,
- drop or correct incorrect properties in several boards,
- correct HDMI bridge ports nodes on Exynos4412 Midas,
- add dummy regulator supplies when necessary to fullfil bindings
requirements,
- use lowercase hex,
- move non-MMIO exynos-bus nodes out of soc node,
- add unit address to USB DWC3 nodes.
2. Correct Exynos5420 MIPI DSI and phy compatibles.
3. Correct Exynos4210 and Exynos4412 HDMI phy compatibles.
4. Add Samsung Galaxy S5 (SM-G900H) board.
* tag 'samsung-dt-6.3' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: (27 commits)
ARM: dts: exynos: add unit address to DWC3 node wrapper in Exynos54xx
ARM: dts: exynos: add unit address to DWC3 node wrapper in Exynos5250
ARM: dts: exynos: move exynos-bus nodes out of soc in Exynos4412
ARM: dts: exynos: move exynos-bus nodes out of soc in Exynos4210
ARM: dts: exynos: move exynos-bus nodes out of soc in Exynos3250
ARM: dts: exynos: move exynos-bus nodes out of soc in Exynos5420
ARM: dts: exynos: use lowercase hex addresses
ARM: dts: exynos: use generic node names for phy
ARM: dts: exynos: correct HDMI phy compatible in Exynos4
ARM: dts: exynos: Add Samsung Galaxy S5 (SM-G900H) board
dt-bindings: arm: samsung: Add compatible for Samsung Galaxy S5 (SM-G900H)
ARM: dts: exynos: Use Exynos5422 compatible for the DSI controller
ARM: dts: exynos: Use Exynos5420 compatible for the MIPI video phy
ARM: dts: exynos: correct HSI2C properties in Exynos5410 Odroid XU
ARM: dts: exynos: correct HS200 property in Exynos5260
ARM: dts: exynos: correct SATA clocks in Exynos5250
ARM: dts: exynos: align HSOTG/USB node names
ARM: dts: exynos: add backlight supply in P4 Note
ARM: dts: exynos: add panel supply in Tiny4412
ARM: dts: exynos: add ports in HDMI bridge in Exynos4412 Midas
...
Link: https://lore.kernel.org/r/20230129143944.5104-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The compatible string "radxa,radxa-cm3" referring the product name
as "Radxa Radxa CM3" but the actual product name is "Radxa CM3".
Fix the compatible strings.
Fixes: 24a28d3eb07d ("dt-bindings: arm: rockchip: Add Radxa Compute Module 3")
Fixes: 7469ab529bca ("arm64: dts: rockchip: Add rk3566 based Radxa Compute Module 3")
Fixes: 096ebfb74b19 ("arm64: dts: rockchip: Add Radxa Compute Module 3 IO board")
Suggested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230123071654.73139-1-jagan@amarulasolutions.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
The Radxa Zero2 is a small form-factor SBC using the Amlogic
A311D chip.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230127150536.3719090-1-christianshewitt@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
|
BPI-M2-PRO is based upon the BPI-M5 using the Amlogic SM1 (S905X3) chipset.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230127142221.3718184-5-christianshewitt@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
|
Document Ufispace NCPLite board compatible.
Signed-off-by: Jordan Chang <jordan.chang@ufispace.com>
Link: https://lore.kernel.org/r/20230119102102.73414-3-jordan.chang@ufispace.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Add the Verdin Yavia Carrier-Board that exists for both Verdin iMX8M
Plus and Verdin iMX8M Mini.
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
i.MX6ULL SoM
Add DH electronics DHCOM PDK2, PicoITX and DRC02 boards
for the DHCOM i.MX6ULL SoM.
Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Not all compatibles of i.MX28 based boards are documented, which
cause dtbs_check warnings. So add the missing compatibles to
fsl.yaml.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Adjust the compatibles for the APF28Dev board in order to fix the
dtbs_check warning:
DTC_CHK arch/arm/boot/dts/imx28-apf28dev.dtb
/home/stefanw/torvalds/arch/arm/boot/dts/imx28-apf28dev.dtb: /: compatible:
oneOf' conditional failed, one must be fixed:
['armadeus,imx28-apf28dev', 'armadeus,imx28-apf28', 'fsl,imx28'] is too long
['armadeus,imx28-apf28dev', 'armadeus,imx28-apf28', 'fsl,imx28'] is too short
...
Fixes: 3d735471d066 ("dt-bindings: arm: Document Armadeus SoM and Dev boards devicetree binding")
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
ODROID-N2L is a variant SBC in small form factor and some peripherals
are removed from ODROID-N2PLUS based on S922X SoC.
- On-board ethernet is removed
- On-board RTC is removed
- USB 3.0 hub is removed, so one USB 2.0 and one USB 3.0 host ports
are available
- Huge heatsink is replaced with 40x40mm heatsink, 5V active heatsink
is recommended or a tall passive sink is optional
- 3.5mm earjack is removed
- IR remote receiver is removed
- MIPI DSI port is added
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230122-topic-odroid-n2l-upstream-initial-v2-1-8d3fea6d403d@linaro.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
|
This new variant is derived from the Advanced PG2 board, replacing the
MiniPCI slot with B and E-keyed M.2 slots.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/e49b4451b6c85ba28bdbbe42b25d9eeecebbe2d7.1674110442.git.jan.kiszka@siemens.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
|
|
Add DT compatible string for a Beacon EmbeddedWorks development
kit based on the i.MX8M Plus from NXP.
Signed-off-by: Adam Ford <aford173@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add the compatible for k3g in the Samsung Exynos5800 boards section.
Signed-off-by: Markuss Broks <markuss.broks@gmail.com>
Link: https://lore.kernel.org/r/20230123222329.13994-2-markuss.broks@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
Document the new compatibles used on Facebook Greatlakes
Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@Wiwynn.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221111034828.2377-2-Delphine_CC_Chiu@Wiwynn.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
AM68 Starter Kit is a low cost, small form factor board designed for
TI's AM68 SoC which is optimized to provide best in class performance
for industrial applications and add binding for the same.
Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
Reviewed-by: Neha Malcom Francis <n-francis@ti.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20230116071446.28867-2-sinthu.raja@ti.com
|
|
gt58 and gt510 are Samsung Galaxy Tab A 8.0/9.7 (2015) tablets.
Document their compatibles.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230107141911.47229-2-nikita@trvn.ru
|
|
Document the new samsung-j5x device tree bindings used in its device tree.
Signed-off-by: Lin, Meng-Bo <linmengbo0689@protonmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230106142956.547081-1-linmengbo0689@protonmail.com
|
|
Document the MSM8939 and supported boards in upstream Sony "Tulip" M4 Aqua
and Square APQ8039 T2.
MSM8939 is one of the older SoCs so we need to expand the list of
qcom,board-ids to allow for the bootloader DTS board-id matching
dependency.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230117024846.1367794-2-bryan.odonoghue@linaro.org
|
|
Add devicetree bindings for AM64x based phyCORE-AM64 SoM
and phyBOARD-Electra RDK.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20230104162927.1215033-1-w.egorov@phytec.de
|
|
Radxa Compute Module 3(CM3) is one of the modules from a series
System On Module based on the Radxa ROCK 3 series and is compatible
with Raspberry Pi CM4 in pinout and form factor.
Specification:
- Rockchip RK3566
- up to 8GB LPDDR4
- up to 128GB high performance eMMC
- Optional wireless LAN, 2.4GHz and 5.0GHz IEEE 802.11b/g/n/ac wireless,
BT 5.0, BLE with onboard and external antenna.
- Gigabit Ethernet PHY
Add dt-bindings for Radxa CM3.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230112105902.192852-1-jagan@amarulasolutions.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Add binding for J784S4 SoC
Signed-off-by: Apurva Nandan <a-nandan@ti.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20230112142725.77785-2-a-nandan@ti.com
|
|
Document the new gplus,fl8005a device tree bindings used in its
device tree.
Signed-off-by: Lin, Meng-Bo <linmengbo0689@protonmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230107133158.139785-1-linmengbo0689@protonmail.com
|
|
Neural Compute Module 6(Neu6) is a 96boards SoM-CB compute module
based on Rockchip RK3588 from Edgeble AI.
Edgeble Neural Compute Module 6(Neu6) IO board is an industrial
form factor evaluation board from Edgeble AI.
Neu6 needs to mount on top of this IO board in order to create complete
Edgeble Neural Compute Module 6(Neu6) IO platform.
This patch add dt-bindings for Edgeble Neu6 Model A SoM based IO board.
Signed-off-by: Jagan Teki <jagan@edgeble.ai>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230110134658.820691-1-jagan@edgeble.ai
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Document SM6115P, an APQ version of SM6115.
Document Lenovo Tab P11 (J606F) as a SM6115P device.
Add SM6115 to the msm-id list of shame.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221208201401.530555-4-konrad.dybcio@linaro.org
|
|
Allow qcom,board-id and qcom,msm-id leagcy properties on these older
platforms: MSM8956, SDM636 and SM4250. Also mention more OnePlus
devices using modified qcom,board-id field.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221214150605.173346-1-krzysztof.kozlowski@linaro.org
|
|
Add entries in the device tree binding for sc7280-zombie with NVMe.
Signed-off-by: Owen Yang <ecs.taipeikernel@gmail.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221214114706.1.Ie4ca64ad56748de5aacd36237d42c80dd003c1a9@changeid
|
|
Add DT binding documentation for the Rockchip RK3588 EVB1,
Radxa Rock 5 Model A and B.
Co-Developed-by: Christopher Obbard <chris.obbard@collabora.com>
Signed-off-by: Christopher Obbard <chris.obbard@collabora.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Jagan Teki <jagan@edgeble.ai>
Link: https://lore.kernel.org/r/20230109155801.51642-5-sebastian.reichel@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Add devicetree binding documentation for the Orange Pi R1 Plus.
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221203074149.11543-2-amadeus@jmu.edu.cn
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Add EmbedFire LubanCat 2
Signed-off-by: Andy Yan <andyshrk@163.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230108110742.2214800-1-andyshrk@163.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Document the SM8550 SoC binding and the MTP board.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230106201047.337409-2-abel.vesa@linaro.org
|
|
Add devicetree binding documentation for the EmbedFire LubanCat 1.
Signed-off-by: Wenhao Cui <lasstp5011@gmail.com>
Signed-off-by: Yuteng Zhong <zonyitoo@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/Y6UdvrhLjS0/8Oic@VM-66-53-centos
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Add bindings for the Mediatek mt8365-evk board.
Signed-off-by: Bernhard Rosenkränzer <bero@baylibre.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20221213234346.2868828-2-bero@baylibre.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
|
|
The i.MX8MM Cloos PHG Board is based on TQ-Systems GmbH i.MX8MM TQMa8MQML SOM,
which results in compatible string in the form:
"vendor,custom-board", "tqm,som", "fsl,soc"
Move the binding entry so this triplet can be matched on.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Marek Vasut <marex@denx.de>
Acked-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|