| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Enable BPF Kernel Functions (kfuncs) in the powerpc BPF JIT.
- Allow per-process DEXCR (Dynamic Execution Control Register) settings
via prctl, notably NPHIE which controls hashst/hashchk for ROP
protection.
- Install powerpc selftests in sub-directories. Note this changes the
way run_kselftest.sh needs to be invoked for powerpc selftests.
- Change fadump (Firmware Assisted Dump) to better handle memory
add/remove.
- Add support for passing additional parameters to the fadump kernel.
- Add support for updating the kdump image on CPU/memory add/remove
events.
- Other small features, cleanups and fixes.
Thanks to Andrew Donnellan, Andy Shevchenko, Aneesh Kumar K.V, Arnd
Bergmann, Benjamin Gray, Bjorn Helgaas, Christian Zigotzky, Christophe
Jaillet, Christophe Leroy, Colin Ian King, Cédric Le Goater, Dr. David
Alan Gilbert, Erhard Furtner, Frank Li, GUO Zihua, Ganesh Goudar, Geoff
Levand, Ghanshyam Agrawal, Greg Kurz, Hari Bathini, Joel Stanley, Justin
Stitt, Kunwu Chan, Li Yang, Lidong Zhong, Madhavan Srinivasan, Mahesh
Salgaonkar, Masahiro Yamada, Matthias Schiffer, Naresh Kamboju, Nathan
Chancellor, Nathan Lynch, Naveen N Rao, Nicholas Miehlbradt, Ran Wang,
Randy Dunlap, Ritesh Harjani, Sachin Sant, Shirisha Ganta, Shrikanth
Hegde, Sourabh Jain, Stephen Rothwell, sundar, Thorsten Blum, Vaibhav
Jain, Xiaowei Bao, Yang Li, and Zhao Chenhui.
* tag 'powerpc-6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (85 commits)
powerpc/fadump: Fix section mismatch warning
powerpc/85xx: fix compile error without CONFIG_CRASH_DUMP
powerpc/fadump: update documentation about bootargs_append
powerpc/fadump: pass additional parameters when fadump is active
powerpc/fadump: setup additional parameters for dump capture kernel
powerpc/pseries/fadump: add support for multiple boot memory regions
selftests/powerpc/dexcr: Fix spelling mistake "predicition" -> "prediction"
KVM: PPC: Book3S HV nestedv2: Fix an error handling path in gs_msg_ops_kvmhv_nestedv2_config_fill_info()
KVM: PPC: Fix documentation for ppc mmu caps
KVM: PPC: code cleanup for kvmppc_book3s_irqprio_deliver
KVM: PPC: Book3S HV nestedv2: Cancel pending DEC exception
powerpc/xmon: Check cpu id in commands "c#", "dp#" and "dx#"
powerpc/code-patching: Use dedicated memory routines for patching
powerpc/code-patching: Test patch_instructions() during boot
powerpc64/kasan: Pass virtual addresses to kasan_init_phys_region()
powerpc: rename SPRN_HID2 define to SPRN_HID2_750FX
powerpc: Fix typos
powerpc/eeh: Fix spelling of the word "auxillary" and update comment
macintosh/ams: Fix unused variable warning
powerpc/Makefile: Remove bits related to the previous use of -mcmodel=large
...
|
|
KVM cleanups for 6.10:
- Misc cleanups extracted from the "exit on missing userspace mapping" series,
which has been put on hold in anticipation of a "KVM Userfault" approach,
which should provide a superset of functionality.
- Remove kvm_make_all_cpus_request_except(), which got added to hack around an
AVIC bug, and then became dead code when a more robust fix came along.
- Fix a goof in the KVM_CREATE_GUEST_MEMFD documentation.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for Linux 6.10
- Move a lot of state that was previously stored on a per vcpu
basis into a per-CPU area, because it is only pertinent to the
host while the vcpu is loaded. This results in better state
tracking, and a smaller vcpu structure.
- Add full handling of the ERET/ERETAA/ERETAB instructions in
nested virtualisation. The last two instructions also require
emulating part of the pointer authentication extension.
As a result, the trap handling of pointer authentication has
been greattly simplified.
- Turn the global (and not very scalable) LPI translation cache
into a per-ITS, scalable cache, making non directly injected
LPIs much cheaper to make visible to the vcpu.
- A batch of pKVM patches, mostly fixes and cleanups, as the
upstreaming process seems to be resuming. Fingers crossed!
- Allocate PPIs and SGIs outside of the vcpu structure, allowing
for smaller EL2 mapping and some flexibility in implementing
more or less than 32 private IRQs.
- Purge stale mpidr_data if a vcpu is created after the MPIDR
map has been created.
- Preserve vcpu-specific ID registers across a vcpu reset.
- Various minor cleanups and improvements.
|
|
The GHCB protocol version may be different from one guest to the next.
Add a field to track it for each KVM instance and extend KVM_SEV_INIT2
to allow it to be configured by userspace.
Now that all SEV-ES support for GHCB protocol version 2 is in place, go
ahead and default to it when creating SEV-ES guests through the new
KVM_SEV_INIT2 interface. Keep the older KVM_SEV_ES_INIT interface
restricted to GHCB protocol version 1.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Message-ID: <20240501071048.2208265-5-michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The documentation mentions KVM_CAP_PPC_RADIX_MMU, but the defines in the
kvm headers spell it KVM_CAP_PPC_MMU_RADIX. Similarly with
KVM_CAP_PPC_MMU_HASH_V3.
Fixes: c92701322711 ("KVM: PPC: Book3S HV: Add userspace interfaces for POWER9 MMU")
Signed-off-by: Joel Stanley <joel@jms.id.au>
Acked-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230411061446.26324-1-joel@jms.id.au
|
|
The KVM_CREATE_GUEST_MEMFD ioctl returns a file descriptor, and is
documented as such in the description. However, the "Returns" field
in the documentation states that the ioctl returns 0 on success.
Update this to match the description.
Signed-off-by: Carlos López <clopez@suse.de>
Fixes: a7800aa80ea4 ("KVM: Add KVM_CREATE_GUEST_MEMFD ioctl() for guest-specific backing memory")
Link: https://lore.kernel.org/r/20240424103317.28522-1-clopez@suse.de
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
* kvm-arm64/pkvm-6.10: (25 commits)
: .
: At last, a bunch of pKVM patches, courtesy of Fuad Tabba.
: From the cover letter:
:
: "This series is a bit of a bombay-mix of patches we've been
: carrying. There's no one overarching theme, but they do improve
: the code by fixing existing bugs in pKVM, refactoring code to
: make it more readable and easier to re-use for pKVM, or adding
: functionality to the existing pKVM code upstream."
: .
KVM: arm64: Force injection of a data abort on NISV MMIO exit
KVM: arm64: Restrict supported capabilities for protected VMs
KVM: arm64: Refactor setting the return value in kvm_vm_ioctl_enable_cap()
KVM: arm64: Document the KVM/arm64-specific calls in hypercalls.rst
KVM: arm64: Rename firmware pseudo-register documentation file
KVM: arm64: Reformat/beautify PTP hypercall documentation
KVM: arm64: Clarify rationale for ZCR_EL1 value restored on guest exit
KVM: arm64: Introduce and use predicates that check for protected VMs
KVM: arm64: Add is_pkvm_initialized() helper
KVM: arm64: Simplify vgic-v3 hypercalls
KVM: arm64: Move setting the page as dirty out of the critical section
KVM: arm64: Change kvm_handle_mmio_return() return polarity
KVM: arm64: Fix comment for __pkvm_vcpu_init_traps()
KVM: arm64: Prevent kmemleak from accessing .hyp.data
KVM: arm64: Do not map the host fpsimd state to hyp in pKVM
KVM: arm64: Rename __tlb_switch_to_{guest,host}() in VHE
KVM: arm64: Support TLB invalidation in guest context
KVM: arm64: Avoid BBM when changing only s/w bits in Stage-2 PTE
KVM: arm64: Check for PTE validity when checking for executable/cacheable
KVM: arm64: Avoid BUG-ing from the host abort path
...
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
If a vcpu exits for a data abort with an invalid syndrome, the
expectations are that userspace has a chance to save the day if
it has requested to see such exits.
However, this is completely futile in the case of a protected VM,
as none of the state is available. In this particular case, inject
a data abort directly into the vcpu, consistent with what userspace
could do.
This also helps with pKVM, which discards all syndrome information when
forwarding data aborts that are not known to be MMIO.
Finally, document this tweak to the API.
Signed-off-by: Fuad Tabba <tabba@google.com>
Acked-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240423150538.2103045-31-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
KVM/arm64 makes use of the SMCCC "Vendor Specific Hypervisor Service
Call Range" to expose KVM-specific hypercalls to guests in a
discoverable and extensible fashion.
Document the existence of this interface and the discovery hypercall.
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Fuad Tabba <tabba@google.com>
Acked-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240423150538.2103045-28-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
In preparation for describing the guest view of KVM/arm64 hypercalls in
hypercalls.rst, move the existing contents of the file concerning the
firmware pseudo-registers elsewhere.
Cc: Raghavendra Rao Ananta <rananta@google.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Fuad Tabba <tabba@google.com>
Acked-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240423150538.2103045-27-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
The PTP hypercall documentation doesn't produce the best-looking table
when formatting in HTML as all of the return value definitions end up
on the same line.
Reformat the PTP hypercall documentation to follow the formatting used
by hypercalls.rst.
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Fuad Tabba <tabba@google.com>
Acked-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240423150538.2103045-26-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
The idea that no parameter would ever be necessary when enabling SEV or
SEV-ES for a VM was decidedly optimistic. In fact, in some sense it's
already a parameter whether SEV or SEV-ES is desired. Another possible
source of variability is the desired set of VMSA features, as that affects
the measurement of the VM's initial state and cannot be changed
arbitrarily by the hypervisor.
Create a new sub-operation for KVM_MEMORY_ENCRYPT_OP that can take a struct,
and put the new op to work by including the VMSA features as a field of the
struct. The existing KVM_SEV_INIT and KVM_SEV_ES_INIT use the full set of
supported VMSA features for backwards compatibility.
The struct also includes the usual bells and whistles for future
extensibility: a flags field that must be zero for now, and some padding
at the end.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20240404121327.3107131-13-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20240404121327.3107131-11-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Compute the set of features to be stored in the VMSA when KVM is
initialized; move it from there into kvm_sev_info when SEV is initialized,
and then into the initial VMSA.
The new variable can then be used to return the set of supported features
to userspace, via the KVM_GET_DEVICE_ATTR ioctl.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Isaku Yamahata <isaku.yamahata@intel.com>
Message-ID: <20240404121327.3107131-6-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Explain that it operates on the VM file descriptor, and also clarify how
detection of SEV operates on old kernels predating commit 2da1ed62d55c
("KVM: SVM: document KVM_MEM_ENCRYPT_OP, let userspace detect if SEV
is available").
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The description of firmware is included part under the "SEV Key Management"
header, part under the KVM_SEV_INIT ioctl. Put these two bits together and
and rename "SEV Key Management" to what it actually is, namely a description
of the KVM_MEMORY_ENCRYPT_OP API.
Reviewed-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
HEAD
Guest-side KVM async #PF ABI cleanup for 6.9
Delete kvm_vcpu_pv_apf_data.enabled to fix a goof in KVM's async #PF ABI where
the enabled field pushes the size of "struct kvm_vcpu_pv_apf_data" from 64 to
68 bytes, i.e. beyond a single cache line.
The enabled field is purely a guest-side flag that Linux-as-a-guest uses to
track whether or not the guest has enabled async #PF support. The actual flag
that is passed to the host, i.e. to KVM proper, is a single bit in a synthetic
MSR, MSR_KVM_ASYNC_PF_EN, i.e. is in a location completely unrelated to the
shared kvm_vcpu_pv_apf_data structure.
Simply drop the the field and use a dedicated guest-side per-CPU variable to
fix the ABI, as opposed to fixing the documentation to match reality. KVM has
never consumed kvm_vcpu_pv_apf_data.enabled, so the odds of the ABI change
breaking anything are extremely low.
|
|
Pull kvm updates from Paolo Bonzini:
"S390:
- Changes to FPU handling came in via the main s390 pull request
- Only deliver to the guest the SCLP events that userspace has
requested
- More virtual vs physical address fixes (only a cleanup since
virtual and physical address spaces are currently the same)
- Fix selftests undefined behavior
x86:
- Fix a restriction that the guest can't program a PMU event whose
encoding matches an architectural event that isn't included in the
guest CPUID. The enumeration of an architectural event only says
that if a CPU supports an architectural event, then the event can
be programmed *using the architectural encoding*. The enumeration
does NOT say anything about the encoding when the CPU doesn't
report support the event *in general*. It might support it, and it
might support it using the same encoding that made it into the
architectural PMU spec
- Fix a variety of bugs in KVM's emulation of RDPMC (more details on
individual commits) and add a selftest to verify KVM correctly
emulates RDMPC, counter availability, and a variety of other
PMC-related behaviors that depend on guest CPUID and therefore are
easier to validate with selftests than with custom guests (aka
kvm-unit-tests)
- Zero out PMU state on AMD if the virtual PMU is disabled, it does
not cause any bug but it wastes time in various cases where KVM
would check if a PMC event needs to be synthesized
- Optimize triggering of emulated events, with a nice ~10%
performance improvement in VM-Exit microbenchmarks when a vPMU is
exposed to the guest
- Tighten the check for "PMI in guest" to reduce false positives if
an NMI arrives in the host while KVM is handling an IRQ VM-Exit
- Fix a bug where KVM would report stale/bogus exit qualification
information when exiting to userspace with an internal error exit
code
- Add a VMX flag in /proc/cpuinfo to report 5-level EPT support
- Rework TDP MMU root unload, free, and alloc to run with mmu_lock
held for read, e.g. to avoid serializing vCPUs when userspace
deletes a memslot
- Tear down TDP MMU page tables at 4KiB granularity (used to be
1GiB). KVM doesn't support yielding in the middle of processing a
zap, and 1GiB granularity resulted in multi-millisecond lags that
are quite impolite for CONFIG_PREEMPT kernels
- Allocate write-tracking metadata on-demand to avoid the memory
overhead when a kernel is built with i915 virtualization support
but the workloads use neither shadow paging nor i915 virtualization
- Explicitly initialize a variety of on-stack variables in the
emulator that triggered KMSAN false positives
- Fix the debugregs ABI for 32-bit KVM
- Rework the "force immediate exit" code so that vendor code
ultimately decides how and when to force the exit, which allowed
some optimization for both Intel and AMD
- Fix a long-standing bug where kvm_has_noapic_vcpu could be left
elevated if vCPU creation ultimately failed, causing extra
unnecessary work
- Cleanup the logic for checking if the currently loaded vCPU is
in-kernel
- Harden against underflowing the active mmu_notifier invalidation
count, so that "bad" invalidations (usually due to bugs elsehwere
in the kernel) are detected earlier and are less likely to hang the
kernel
x86 Xen emulation:
- Overlay pages can now be cached based on host virtual address,
instead of guest physical addresses. This removes the need to
reconfigure and invalidate the cache if the guest changes the gpa
but the underlying host virtual address remains the same
- When possible, use a single host TSC value when computing the
deadline for Xen timers in order to improve the accuracy of the
timer emulation
- Inject pending upcall events when the vCPU software-enables its
APIC to fix a bug where an upcall can be lost (and to follow Xen's
behavior)
- Fall back to the slow path instead of warning if "fast" IRQ
delivery of Xen events fails, e.g. if the guest has aliased xAPIC
IDs
RISC-V:
- Support exception and interrupt handling in selftests
- New self test for RISC-V architectural timer (Sstc extension)
- New extension support (Ztso, Zacas)
- Support userspace emulation of random number seed CSRs
ARM:
- Infrastructure for building KVM's trap configuration based on the
architectural features (or lack thereof) advertised in the VM's ID
registers
- Support for mapping vfio-pci BARs as Normal-NC (vaguely similar to
x86's WC) at stage-2, improving the performance of interacting with
assigned devices that can tolerate it
- Conversion of KVM's representation of LPIs to an xarray, utilized
to address serialization some of the serialization on the LPI
injection path
- Support for _architectural_ VHE-only systems, advertised through
the absence of FEAT_E2H0 in the CPU's ID register
- Miscellaneous cleanups, fixes, and spelling corrections to KVM and
selftests
LoongArch:
- Set reserved bits as zero in CPUCFG
- Start SW timer only when vcpu is blocking
- Do not restart SW timer when it is expired
- Remove unnecessary CSR register saving during enter guest
- Misc cleanups and fixes as usual
Generic:
- Clean up Kconfig by removing CONFIG_HAVE_KVM, which was basically
always true on all architectures except MIPS (where Kconfig
determines the available depending on CPU capabilities). It is
replaced either by an architecture-dependent symbol for MIPS, and
IS_ENABLED(CONFIG_KVM) everywhere else
- Factor common "select" statements in common code instead of
requiring each architecture to specify it
- Remove thoroughly obsolete APIs from the uapi headers
- Move architecture-dependent stuff to uapi/asm/kvm.h
- Always flush the async page fault workqueue when a work item is
being removed, especially during vCPU destruction, to ensure that
there are no workers running in KVM code when all references to
KVM-the-module are gone, i.e. to prevent a very unlikely
use-after-free if kvm.ko is unloaded
- Grab a reference to the VM's mm_struct in the async #PF worker
itself instead of gifting the worker a reference, so that there's
no need to remember to *conditionally* clean up after the worker
Selftests:
- Reduce boilerplate especially when utilize selftest TAP
infrastructure
- Add basic smoke tests for SEV and SEV-ES, along with a pile of
library support for handling private/encrypted/protected memory
- Fix benign bugs where tests neglect to close() guest_memfd files"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (246 commits)
selftests: kvm: remove meaningless assignments in Makefiles
KVM: riscv: selftests: Add Zacas extension to get-reg-list test
RISC-V: KVM: Allow Zacas extension for Guest/VM
KVM: riscv: selftests: Add Ztso extension to get-reg-list test
RISC-V: KVM: Allow Ztso extension for Guest/VM
RISC-V: KVM: Forward SEED CSR access to user space
KVM: riscv: selftests: Add sstc timer test
KVM: riscv: selftests: Change vcpu_has_ext to a common function
KVM: riscv: selftests: Add guest helper to get vcpu id
KVM: riscv: selftests: Add exception handling support
LoongArch: KVM: Remove unnecessary CSR register saving during enter guest
LoongArch: KVM: Do not restart SW timer when it is expired
LoongArch: KVM: Start SW timer only when vcpu is blocking
LoongArch: KVM: Set reserved bits as zero in CPUCFG
KVM: selftests: Explicitly close guest_memfd files in some gmem tests
KVM: x86/xen: fix recursive deadlock in timer injection
KVM: pfncache: simplify locking and make more self-contained
KVM: x86/xen: remove WARN_ON_ONCE() with false positives in evtchn delivery
KVM: x86/xen: inject vCPU upcall vector when local APIC is enabled
KVM: x86/xen: improve accuracy of Xen timers
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 SEV updates from Borislav Petkov:
- Add the x86 part of the SEV-SNP host support.
This will allow the kernel to be used as a KVM hypervisor capable of
running SNP (Secure Nested Paging) guests. Roughly speaking, SEV-SNP
is the ultimate goal of the AMD confidential computing side,
providing the most comprehensive confidential computing environment
up to date.
This is the x86 part and there is a KVM part which did not get ready
in time for the merge window so latter will be forthcoming in the
next cycle.
- Rework the early code's position-dependent SEV variable references in
order to allow building the kernel with clang and -fPIE/-fPIC and
-mcmodel=kernel
- The usual set of fixes, cleanups and improvements all over the place
* tag 'x86_sev_for_v6.9_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits)
x86/sev: Disable KMSAN for memory encryption TUs
x86/sev: Dump SEV_STATUS
crypto: ccp - Have it depend on AMD_IOMMU
iommu/amd: Fix failure return from snp_lookup_rmpentry()
x86/sev: Fix position dependent variable references in startup code
crypto: ccp: Make snp_range_list static
x86/Kconfig: Remove CONFIG_AMD_MEM_ENCRYPT_ACTIVE_BY_DEFAULT
Documentation: virt: Fix up pre-formatted text block for SEV ioctls
crypto: ccp: Add the SNP_SET_CONFIG command
crypto: ccp: Add the SNP_COMMIT command
crypto: ccp: Add the SNP_PLATFORM_STATUS command
x86/cpufeatures: Enable/unmask SEV-SNP CPU feature
KVM: SEV: Make AVIC backing, VMSA and VMCB memory allocation SNP safe
crypto: ccp: Add panic notifier for SEV/SNP firmware shutdown on kdump
iommu/amd: Clean up RMP entries for IOMMU pages during SNP shutdown
crypto: ccp: Handle legacy SEV commands when SNP is enabled
crypto: ccp: Handle non-volatile INIT_EX data when SNP is enabled
crypto: ccp: Handle the legacy TMR allocation when SNP is enabled
x86/sev: Introduce an SNP leaked pages list
crypto: ccp: Provide an API to issue SEV and SNP commands
...
|
|
KVM Xen and pfncache changes for 6.9:
- Rip out the half-baked support for using gfn_to_pfn caches to manage pages
that are "mapped" into guests via physical addresses.
- Add support for using gfn_to_pfn caches with only a host virtual address,
i.e. to bypass the "gfn" stage of the cache. The primary use case is
overlay pages, where the guest may change the gfn used to reference the
overlay page, but the backing hva+pfn remains the same.
- Add an ioctl() to allow mapping Xen's shared_info page using an hva instead
of a gpa, so that userspace doesn't need to reconfigure and invalidate the
cache/mapping if the guest changes the gpa (but userspace keeps the resolved
hva the same).
- When possible, use a single host TSC value when computing the deadline for
Xen timers in order to improve the accuracy of the timer emulation.
- Inject pending upcall events when the vCPU software-enables its APIC to fix
a bug where an upcall can be lost (and to follow Xen's behavior).
- Fall back to the slow path instead of warning if "fast" IRQ delivery of Xen
events fails, e.g. if the guest has aliased xAPIC IDs.
- Extend gfn_to_pfn_cache's mutex to cover (de)activation (in addition to
refresh), and drop a now-redundant acquisition of xen_lock (that was
protecting the shared_info cache) to fix a deadlock due to recursively
acquiring xen_lock.
|
|
Pull kvm fixes from Paolo Bonzini:
"KVM GUEST_MEMFD fixes for 6.8:
- Make KVM_MEM_GUEST_MEMFD mutually exclusive with KVM_MEM_READONLY
to avoid creating an inconsistent ABI (KVM_MEM_GUEST_MEMFD is not
writable from userspace, so there would be no way to write to a
read-only guest_memfd).
- Update documentation for KVM_SW_PROTECTED_VM to make it abundantly
clear that such VMs are purely for development and testing.
- Limit KVM_SW_PROTECTED_VM guests to the TDP MMU, as the long term
plan is to support confidential VMs with deterministic private
memory (SNP and TDX) only in the TDP MMU.
- Fix a bug in a GUEST_MEMFD dirty logging test that caused false
passes.
x86 fixes:
- Fix missing marking of a guest page as dirty when emulating an
atomic access.
- Check for mmu_notifier invalidation events before faulting in the
pfn, and before acquiring mmu_lock, to avoid unnecessary work and
lock contention with preemptible kernels (including
CONFIG_PREEMPT_DYNAMIC in non-preemptible mode).
- Disable AMD DebugSwap by default, it breaks VMSA signing and will
be re-enabled with a better VM creation API in 6.10.
- Do the cache flush of converted pages in svm_register_enc_region()
before dropping kvm->lock, to avoid a race with unregistering of
the same region and the consequent use-after-free issue"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
SEV: disable SEV-ES DebugSwap by default
KVM: x86/mmu: Retry fault before acquiring mmu_lock if mapping is changing
KVM: SVM: Flush pages under kvm->lock to fix UAF in svm_register_enc_region()
KVM: selftests: Add a testcase to verify GUEST_MEMFD and READONLY are exclusive
KVM: selftests: Create GUEST_MEMFD for relevant invalid flags testcases
KVM: x86/mmu: Restrict KVM_SW_PROTECTED_VM to the TDP MMU
KVM: x86: Update KVM_SW_PROTECTED_VM docs to make it clear they're a WIP
KVM: Make KVM_MEM_GUEST_MEMFD mutually exclusive with KVM_MEM_READONLY
KVM: x86: Mark target gfn of emulated atomic instruction as dirty
|
|
Add documentation topic for PCI pass-thru devices in Linux guests
on Hyper-V and for the associated PCI controller driver (pci-hyperv.c).
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Link: https://lore.kernel.org/r/20240222200710.305259-1-mhklinux@outlook.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20240222200710.305259-1-mhklinux@outlook.com>
|
|
Rewrite the help message for KVM_SW_PROTECTED_VM to make it clear that
software-protected VMs are a development and testing vehicle for
guest_memfd(), and that attempting to use KVM_SW_PROTECTED_VM for anything
remotely resembling a "real" VM will fail. E.g. any memory accesses from
KVM will incorrectly access shared memory, nested TDP is wildly broken,
and so on and so forth.
Update KVM's API documentation with similar warnings to discourage anyone
from attempting to run anything but selftests with KVM_X86_SW_PROTECTED_VM.
Fixes: 89ea60c2c7b5 ("KVM: x86: Add support for "protected VMs" that can utilize private memory")
Link: https://lore.kernel.org/r/20240222190612.2942589-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
If the guest does not explicitly set the GPA of vcpu_info structure in
memory then, for guests with 32 vCPUs or fewer, the vcpu_info embedded
in the shared_info page may be used. As described in a previous commit,
the shared_info page is an overlay at a fixed HVA within the VMM, so in
this case it also more optimal to activate the vcpu_info cache with a
fixed HVA to avoid unnecessary invalidation if the guest memory layout
is modified.
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Link: https://lore.kernel.org/r/20240215152916.1158-14-paul@xen.org
[sean: use kvm_gpc_is_{gpa,hva}_active()]
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
The shared_info page is not guest memory as such. It is a dedicated page
allocated by the VMM and overlaid onto guest memory in a GFN chosen by the
guest and specified in the XENMEM_add_to_physmap hypercall. The guest may
even request that shared_info be moved from one GFN to another by
re-issuing that hypercall, but the HVA is never going to change.
Because the shared_info page is an overlay the memory slots need to be
updated in response to the hypercall. However, memory slot adjustment is
not atomic and, whilst all vCPUs are paused, there is still the possibility
that events may be delivered (which requires the shared_info page to be
updated) whilst the shared_info GPA is absent. The HVA is never absent
though, so it makes much more sense to use that as the basis for the
kernel's mapping.
Hence add a new KVM_XEN_ATTR_TYPE_SHARED_INFO_HVA attribute type for this
purpose and a KVM_XEN_HVM_CONFIG_SHARED_INFO_HVA flag to advertize its
availability. Don't actually advertize it yet though. That will be done in
a subsequent patch, which will also add tests for the new attribute type.
Also update the KVM API documentation with the new attribute and also fix
it up to consistently refer to 'shared_info' (with the underscore).
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Link: https://lore.kernel.org/r/20240215152916.1158-13-paul@xen.org
[sean: store "hva" as a user pointer, use kvm_gpc_is_{gpa,hva}_active()]
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Fix some incorrect statement of MSR_KVM_ASYNC_PF_EN documentation and
state clearly the token in 'struct kvm_vcpu_pv_apf_data' of 'page ready'
event is matchted with the token in CR2 in 'page not present' event.
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Link: https://lore.kernel.org/r/20231025055914.1201792-3-xiaoyao.li@intel.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Refer to commit fd10cde9294f ("KVM paravirt: Add async PF initialization
to PV guest") and commit 344d9588a9df ("KVM: Add PV MSR to enable
asynchronous page faults delivery"). It turns out that at the time when
asyncpf was introduced, the purpose was defining the shared PV data 'struct
kvm_vcpu_pv_apf_data' with the size of 64 bytes. However, it made a mistake
and defined the size to 68 bytes, which failed to make fit in a cache line
and made the code inconsistent with the documentation.
Below justification quoted from Sean[*]
KVM (the host side) has *never* read kvm_vcpu_pv_apf_data.enabled, and
the documentation clearly states that enabling is based solely on the
bit in the synthetic MSR.
So rather than update the documentation, fix the goof by removing the
enabled filed and use the separate percpu variable instread.
KVM-as-a-host obviously doesn't enforce anything or consume the size,
and changing the header will only affect guests that are rebuilt against
the new header, so there's no chance of ABI breakage between KVM and its
guests. The only possible breakage is if some other hypervisor is
emulating KVM's async #PF (LOL) and relies on the guest to set
kvm_vcpu_pv_apf_data.enabled. But (a) I highly doubt such a hypervisor
exists, (b) that would arguably be a violation of KVM's "spec", and
(c) the worst case scenario is that the guest would simply lose async
#PF functionality.
[*] https://lore.kernel.org/all/ZS7ERnnRqs8Fl0ZF@google.com/T/#u
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Link: https://lore.kernel.org/r/20231025055914.1201792-2-xiaoyao.li@intel.com
[sean: use true/false instead of 1/0 for booleans]
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
A missing newline after "::" resulted in the htmldocs build failing to
recognize the start of a pre-formatted block of text, resulting in
kernel/linux/Documentation/virt/coco/sev-guest.rst:75: WARNING: Inline emphasis start-string without end-string.
kernel/linux/Documentation/virt/coco/sev-guest.rst:78: WARNING: Inline emphasis start-string without end-string.
kernel/linux/Documentation/virt/coco/sev-guest.rst:81: WARNING: Inline emphasis start-string without end-string.
kernel/linux/Documentation/virt/coco/sev-guest.rst:83: WARNING: Definition list ends without a blank line; unexpected unindent.
Fix it.
Fixes: f5db8841ebe5 ("crypto: ccp: Add the SNP_PLATFORM_STATUS command")
Closes: https://lore.kernel.org/linux-next/20240202145932.31c62fd6@canb.auug.org.au/
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20240202160544.2297320-1-michael.roth@amd.com
|
|
The SEV-SNP firmware provides the SNP_CONFIG command used to set various
system-wide configuration values for SNP guests, such as the reported
TCB version used when signing guest attestation reports. Add an
interface to set this via userspace.
[ mdr: Squash in doc patch from Dionna, drop extended request/
certificate handling and simplify this to a simple wrapper around
SNP_CONFIG fw cmd. ]
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Co-developed-by: Alexey Kardashevskiy <aik@amd.com>
Signed-off-by: Alexey Kardashevskiy <aik@amd.com>
Co-developed-by: Dionna Glaze <dionnaglaze@google.com>
Signed-off-by: Dionna Glaze <dionnaglaze@google.com>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20240126041126.1927228-26-michael.roth@amd.com
|
|
The SNP_COMMIT command is used to commit the currently installed version
of the SEV firmware. Once committed, the firmware cannot be replaced
with a previous firmware version (cannot be rolled back). This command
will also update the reported TCB to match that of the currently
installed firmware.
[ mdr: Note the reported TCB update in the documentation/commit. ]
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20240126041126.1927228-25-michael.roth@amd.com
|
|
This command is used to query the SNP platform status. See the SEV-SNP
spec for more details.
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20240126041126.1927228-24-michael.roth@amd.com
|
|
KVM x86 MMU changes for 6.8:
- Fix a relatively benign off-by-one error when splitting huge pages during
CLEAR_DIRTY_LOG.
- Fix a bug where KVM could incorrectly test-and-clear dirty bits in non-leaf
TDP MMU SPTEs if a racing thread replaces a huge SPTE with a non-huge SPTE.
- Relax the TDP MMU's lockdep assertions related to holding mmu_lock for read
versus write so that KVM doesn't pass "bool shared" all over the place just
to have precise assertions in paths that don't actually care about whether
the caller is a reader or a writer.
|
|
KVM Xen change for 6.8:
To workaround Xen guests that don't expect Xen PV clocks to be marked as being
based on a stable TSC, add a Xen config knob to allow userspace to opt out of
KVM setting the "TSC stable" bit in Xen PV clocks. Note, the "TSC stable" bit
was added to the PVCLOCK ABI by KVM without an ack from Xen, i.e. KVM isn't
entirely blameless for the buggy guest behavior.
|
|
The deprecated interfaces were removed 15 years ago. KVM's
device assignment was deprecated in 4.2 and removed 6.5 years
ago; the only interest might be in compiling ancient versions
of QEMU, but QEMU has been using its own imported copy of the
kernel headers since June 2011. So again we go into archaeology
territory; just remove the cruft.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Unless explicitly told to do so (by passing 'clocksource=tsc' and
'tsc=stable:socket', and then jumping through some hoops concerning
potential CPU hotplug) Xen will never use TSC as its clocksource.
Hence, by default, a Xen guest will not see PVCLOCK_TSC_STABLE_BIT set
in either the primary or secondary pvclock memory areas. This has
led to bugs in some guest kernels which only become evident if
PVCLOCK_TSC_STABLE_BIT *is* set in the pvclocks. Hence, to support
such guests, give the VMM a new Xen HVM config flag to tell KVM to
forcibly clear the bit in the Xen pvclocks.
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Link: https://lore.kernel.org/r/20231102162128.2353459-1-paul@xen.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
It is cheap to take tdp_mmu_pages_lock in all write-side critical sections.
We already do it all the time when zapping with read_lock(), so it is not
a problem to do it from the kvm_tdp_mmu_zap_all() path (aka
kvm_arch_flush_shadow_all(), aka VM destruction and MMU notifier release).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Link: https://lore.kernel.org/r/20231125083400.1399197-4-pbonzini@redhat.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Add a new x86 VM type, KVM_X86_SW_PROTECTED_VM, to serve as a development
and testing vehicle for Confidential (CoCo) VMs, and potentially to even
become a "real" product in the distant future, e.g. a la pKVM.
The private memory support in KVM x86 is aimed at AMD's SEV-SNP and
Intel's TDX, but those technologies are extremely complex (understatement),
difficult to debug, don't support running as nested guests, and require
hardware that's isn't universally accessible. I.e. relying SEV-SNP or TDX
for maintaining guest private memory isn't a realistic option.
At the very least, KVM_X86_SW_PROTECTED_VM will enable a variety of
selftests for guest_memfd and private memory support without requiring
unique hardware.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20231027182217.3615211-24-seanjc@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Add support for resolving page faults on guest private memory for VMs
that differentiate between "shared" and "private" memory. For such VMs,
KVM_MEM_GUEST_MEMFD memslots can include both fd-based private memory and
hva-based shared memory, and KVM needs to map in the "correct" variant,
i.e. KVM needs to map the gfn shared/private as appropriate based on the
current state of the gfn's KVM_MEMORY_ATTRIBUTE_PRIVATE flag.
For AMD's SEV-SNP and Intel's TDX, the guest effectively gets to request
shared vs. private via a bit in the guest page tables, i.e. what the guest
wants may conflict with the current memory attributes. To support such
"implicit" conversion requests, exit to user with KVM_EXIT_MEMORY_FAULT
to forward the request to userspace. Add a new flag for memory faults,
KVM_MEMORY_EXIT_FLAG_PRIVATE, to communicate whether the guest wants to
map memory as shared vs. private.
Like KVM_MEMORY_ATTRIBUTE_PRIVATE, use bit 3 for flagging private memory
so that KVM can use bits 0-2 for capturing RWX behavior if/when userspace
needs such information, e.g. a likely user of KVM_EXIT_MEMORY_FAULT is to
exit on missing mappings when handling guest page fault VM-Exits. In
that case, userspace will want to know RWX information in order to
correctly/precisely resolve the fault.
Note, private memory *must* be backed by guest_memfd, i.e. shared mappings
always come from the host userspace page tables, and private mappings
always come from a guest_memfd instance.
Co-developed-by: Yu Zhang <yu.c.zhang@linux.intel.com>
Signed-off-by: Yu Zhang <yu.c.zhang@linux.intel.com>
Signed-off-by: Chao Peng <chao.p.peng@linux.intel.com>
Co-developed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Message-Id: <20231027182217.3615211-21-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Introduce an ioctl(), KVM_CREATE_GUEST_MEMFD, to allow creating file-based
memory that is tied to a specific KVM virtual machine and whose primary
purpose is to serve guest memory.
A guest-first memory subsystem allows for optimizations and enhancements
that are kludgy or outright infeasible to implement/support in a generic
memory subsystem. With guest_memfd, guest protections and mapping sizes
are fully decoupled from host userspace mappings. E.g. KVM currently
doesn't support mapping memory as writable in the guest without it also
being writable in host userspace, as KVM's ABI uses VMA protections to
define the allow guest protection. Userspace can fudge this by
establishing two mappings, a writable mapping for the guest and readable
one for itself, but that’s suboptimal on multiple fronts.
Similarly, KVM currently requires the guest mapping size to be a strict
subset of the host userspace mapping size, e.g. KVM doesn’t support
creating a 1GiB guest mapping unless userspace also has a 1GiB guest
mapping. Decoupling the mappings sizes would allow userspace to precisely
map only what is needed without impacting guest performance, e.g. to
harden against unintentional accesses to guest memory.
Decoupling guest and userspace mappings may also allow for a cleaner
alternative to high-granularity mappings for HugeTLB, which has reached a
bit of an impasse and is unlikely to ever be merged.
A guest-first memory subsystem also provides clearer line of sight to
things like a dedicated memory pool (for slice-of-hardware VMs) and
elimination of "struct page" (for offload setups where userspace _never_
needs to mmap() guest memory).
More immediately, being able to map memory into KVM guests without mapping
said memory into the host is critical for Confidential VMs (CoCo VMs), the
initial use case for guest_memfd. While AMD's SEV and Intel's TDX prevent
untrusted software from reading guest private data by encrypting guest
memory with a key that isn't usable by the untrusted host, projects such
as Protected KVM (pKVM) provide confidentiality and integrity *without*
relying on memory encryption. And with SEV-SNP and TDX, accessing guest
private memory can be fatal to the host, i.e. KVM must be prevent host
userspace from accessing guest memory irrespective of hardware behavior.
Attempt #1 to support CoCo VMs was to add a VMA flag to mark memory as
being mappable only by KVM (or a similarly enlightened kernel subsystem).
That approach was abandoned largely due to it needing to play games with
PROT_NONE to prevent userspace from accessing guest memory.
Attempt #2 to was to usurp PG_hwpoison to prevent the host from mapping
guest private memory into userspace, but that approach failed to meet
several requirements for software-based CoCo VMs, e.g. pKVM, as the kernel
wouldn't easily be able to enforce a 1:1 page:guest association, let alone
a 1:1 pfn:gfn mapping. And using PG_hwpoison does not work for memory
that isn't backed by 'struct page', e.g. if devices gain support for
exposing encrypted memory regions to guests.
Attempt #3 was to extend the memfd() syscall and wrap shmem to provide
dedicated file-based guest memory. That approach made it as far as v10
before feedback from Hugh Dickins and Christian Brauner (and others) led
to it demise.
Hugh's objection was that piggybacking shmem made no sense for KVM's use
case as KVM didn't actually *want* the features provided by shmem. I.e.
KVM was using memfd() and shmem to avoid having to manage memory directly,
not because memfd() and shmem were the optimal solution, e.g. things like
read/write/mmap in shmem were dead weight.
Christian pointed out flaws with implementing a partial overlay (wrapping
only _some_ of shmem), e.g. poking at inode_operations or super_operations
would show shmem stuff, but address_space_operations and file_operations
would show KVM's overlay. Paraphrashing heavily, Christian suggested KVM
stop being lazy and create a proper API.
Link: https://lore.kernel.org/all/20201020061859.18385-1-kirill.shutemov@linux.intel.com
Link: https://lore.kernel.org/all/20210416154106.23721-1-kirill.shutemov@linux.intel.com
Link: https://lore.kernel.org/all/20210824005248.200037-1-seanjc@google.com
Link: https://lore.kernel.org/all/20211111141352.26311-1-chao.p.peng@linux.intel.com
Link: https://lore.kernel.org/all/20221202061347.1070246-1-chao.p.peng@linux.intel.com
Link: https://lore.kernel.org/all/ff5c5b97-acdf-9745-ebe5-c6609dd6322e@google.com
Link: https://lore.kernel.org/all/20230418-anfallen-irdisch-6993a61be10b@brauner
Link: https://lore.kernel.org/all/ZEM5Zq8oo+xnApW9@google.com
Link: https://lore.kernel.org/linux-mm/20230306191944.GA15773@monkey
Link: https://lore.kernel.org/linux-mm/ZII1p8ZHlHaQ3dDl@casper.infradead.org
Cc: Fuad Tabba <tabba@google.com>
Cc: Vishal Annapurve <vannapurve@google.com>
Cc: Ackerley Tng <ackerleytng@google.com>
Cc: Jarkko Sakkinen <jarkko@kernel.org>
Cc: Maciej Szmigiero <mail@maciej.szmigiero.name>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: David Hildenbrand <david@redhat.com>
Cc: Quentin Perret <qperret@google.com>
Cc: Michael Roth <michael.roth@amd.com>
Cc: Wang <wei.w.wang@intel.com>
Cc: Liam Merwick <liam.merwick@oracle.com>
Cc: Isaku Yamahata <isaku.yamahata@gmail.com>
Co-developed-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Co-developed-by: Yu Zhang <yu.c.zhang@linux.intel.com>
Signed-off-by: Yu Zhang <yu.c.zhang@linux.intel.com>
Co-developed-by: Chao Peng <chao.p.peng@linux.intel.com>
Signed-off-by: Chao Peng <chao.p.peng@linux.intel.com>
Co-developed-by: Ackerley Tng <ackerleytng@google.com>
Signed-off-by: Ackerley Tng <ackerleytng@google.com>
Co-developed-by: Isaku Yamahata <isaku.yamahata@intel.com>
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Co-developed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Co-developed-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20231027182217.3615211-17-seanjc@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
In confidential computing usages, whether a page is private or shared is
necessary information for KVM to perform operations like page fault
handling, page zapping etc. There are other potential use cases for
per-page memory attributes, e.g. to make memory read-only (or no-exec,
or exec-only, etc.) without having to modify memslots.
Introduce the KVM_SET_MEMORY_ATTRIBUTES ioctl, advertised by
KVM_CAP_MEMORY_ATTRIBUTES, to allow userspace to set the per-page memory
attributes to a guest memory range.
Use an xarray to store the per-page attributes internally, with a naive,
not fully optimized implementation, i.e. prioritize correctness over
performance for the initial implementation.
Use bit 3 for the PRIVATE attribute so that KVM can use bits 0-2 for RWX
attributes/protections in the future, e.g. to give userspace fine-grained
control over read, write, and execute protections for guest memory.
Provide arch hooks for handling attribute changes before and after common
code sets the new attributes, e.g. x86 will use the "pre" hook to zap all
relevant mappings, and the "post" hook to track whether or not hugepages
can be used to map the range.
To simplify the implementation wrap the entire sequence with
kvm_mmu_invalidate_{begin,end}() even though the operation isn't strictly
guaranteed to be an invalidation. For the initial use case, x86 *will*
always invalidate memory, and preventing arch code from creating new
mappings while the attributes are in flux makes it much easier to reason
about the correctness of consuming attributes.
It's possible that future usages may not require an invalidation, e.g.
if KVM ends up supporting RWX protections and userspace grants _more_
protections, but again opt for simplicity and punt optimizations to
if/when they are needed.
Suggested-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/all/Y2WB48kD0J4VGynX@google.com
Cc: Fuad Tabba <tabba@google.com>
Cc: Xu Yilun <yilun.xu@intel.com>
Cc: Mickaël Salaün <mic@digikod.net>
Signed-off-by: Chao Peng <chao.p.peng@linux.intel.com>
Co-developed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20231027182217.3615211-14-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Add a new KVM exit type to allow userspace to handle memory faults that
KVM cannot resolve, but that userspace *may* be able to handle (without
terminating the guest).
KVM will initially use KVM_EXIT_MEMORY_FAULT to report implicit
conversions between private and shared memory. With guest private memory,
there will be two kind of memory conversions:
- explicit conversion: happens when the guest explicitly calls into KVM
to map a range (as private or shared)
- implicit conversion: happens when the guest attempts to access a gfn
that is configured in the "wrong" state (private vs. shared)
On x86 (first architecture to support guest private memory), explicit
conversions will be reported via KVM_EXIT_HYPERCALL+KVM_HC_MAP_GPA_RANGE,
but reporting KVM_EXIT_HYPERCALL for implicit conversions is undesriable
as there is (obviously) no hypercall, and there is no guarantee that the
guest actually intends to convert between private and shared, i.e. what
KVM thinks is an implicit conversion "request" could actually be the
result of a guest code bug.
KVM_EXIT_MEMORY_FAULT will be used to report memory faults that appear to
be implicit conversions.
Note! To allow for future possibilities where KVM reports
KVM_EXIT_MEMORY_FAULT and fills run->memory_fault on _any_ unresolved
fault, KVM returns "-EFAULT" (-1 with errno == EFAULT from userspace's
perspective), not '0'! Due to historical baggage within KVM, exiting to
userspace with '0' from deep callstacks, e.g. in emulation paths, is
infeasible as doing so would require a near-complete overhaul of KVM,
whereas KVM already propagates -errno return codes to userspace even when
the -errno originated in a low level helper.
Report the gpa+size instead of a single gfn even though the initial usage
is expected to always report single pages. It's entirely possible, likely
even, that KVM will someday support sub-page granularity faults, e.g.
Intel's sub-page protection feature allows for additional protections at
128-byte granularity.
Link: https://lore.kernel.org/all/20230908222905.1321305-5-amoorthy@google.com
Link: https://lore.kernel.org/all/ZQ3AmLO2SYv3DszH@google.com
Cc: Anish Moorthy <amoorthy@google.com>
Cc: David Matlack <dmatlack@google.com>
Suggested-by: Sean Christopherson <seanjc@google.com>
Co-developed-by: Yu Zhang <yu.c.zhang@linux.intel.com>
Signed-off-by: Yu Zhang <yu.c.zhang@linux.intel.com>
Signed-off-by: Chao Peng <chao.p.peng@linux.intel.com>
Co-developed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20231027182217.3615211-10-seanjc@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Introduce a "version 2" of KVM_SET_USER_MEMORY_REGION so that additional
information can be supplied without setting userspace up to fail. The
padding in the new kvm_userspace_memory_region2 structure will be used to
pass a file descriptor in addition to the userspace_addr, i.e. allow
userspace to point at a file descriptor and map memory into a guest that
is NOT mapped into host userspace.
Alternatively, KVM could simply add "struct kvm_userspace_memory_region2"
without a new ioctl(), but as Paolo pointed out, adding a new ioctl()
makes detection of bad flags a bit more robust, e.g. if the new fd field
is guarded only by a flag and not a new ioctl(), then a userspace bug
(setting a "bad" flag) would generate out-of-bounds access instead of an
-EINVAL error.
Cc: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Message-Id: <20231027182217.3615211-9-seanjc@google.com>
Acked-by: Kai Huang <kai.huang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for 6.7
- Generalized infrastructure for 'writable' ID registers, effectively
allowing userspace to opt-out of certain vCPU features for its guest
- Optimization for vSGI injection, opportunistically compressing MPIDR
to vCPU mapping into a table
- Improvements to KVM's PMU emulation, allowing userspace to select
the number of PMCs available to a VM
- Guest support for memory operation instructions (FEAT_MOPS)
- Cleanups to handling feature flags in KVM_ARM_VCPU_INIT, squashing
bugs and getting rid of useless code
- Changes to the way the SMCCC filter is constructed, avoiding wasted
memory allocations when not in use
- Load the stage-2 MMU context at vcpu_load() for VHE systems, reducing
the overhead of errata mitigations
- Miscellaneous kernel and selftest fixes
|
|
KVM x86 Documentation updates for 6.7:
- Fix various typos, notably a confusing reference to the non-existent
"struct kvm_vcpu_event" (the actual structure is kvm_vcpu_events, plural).
- Update x86's kvm_mmu_page documentation to bring it closer to the code
(this raced with the removal of async zapping and so the documentation is
already stale; my bad).
- Document the behavior of x86 PMU filters on fixed counters.
|
|
* kvm-arm64/writable-id-regs:
: Writable ID registers, courtesy of Jing Zhang
:
: This series significantly expands the architectural feature set that
: userspace can manipulate via the ID registers. A new ioctl is defined
: that makes the mutable fields in the ID registers discoverable to
: userspace.
KVM: selftests: Avoid using forced target for generating arm64 headers
tools headers arm64: Fix references to top srcdir in Makefile
KVM: arm64: selftests: Test for setting ID register from usersapce
tools headers arm64: Update sysreg.h with kernel sources
KVM: selftests: Generate sysreg-defs.h and add to include path
perf build: Generate arm64's sysreg-defs.h and add to include path
tools: arm64: Add a Makefile for generating sysreg-defs.h
KVM: arm64: Document vCPU feature selection UAPIs
KVM: arm64: Allow userspace to change ID_AA64ZFR0_EL1
KVM: arm64: Allow userspace to change ID_AA64PFR0_EL1
KVM: arm64: Allow userspace to change ID_AA64MMFR{0-2}_EL1
KVM: arm64: Allow userspace to change ID_AA64ISAR{0-2}_EL1
KVM: arm64: Bump up the default KVM sanitised debug version to v8p8
KVM: arm64: Reject attempts to set invalid debug arch version
KVM: arm64: Advertise selected DebugVer in DBGDIDR.Version
KVM: arm64: Use guest ID register values for the sake of emulation
KVM: arm64: Document KVM_ARM_GET_REG_WRITABLE_MASKS
KVM: arm64: Allow userspace to get the writable masks for feature ID registers
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
KVM/arm64 has a couple schemes for handling vCPU feature selection now,
which is a lot to put on userspace. Add some documentation about how
these interact and provide some recommendations for how to use the
writable ID register scheme.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20231003230408.3405722-11-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Add some basic documentation on how to get feature ID register writable
masks from userspace.
Signed-off-by: Jing Zhang <jingzhangos@google.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20231003230408.3405722-3-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Supplement kvm document about LoongArch-specific part, such as add
api introduction for GET/SET_ONE_REG, GET/SET_FPU, GET/SET_MP_STATE,
etc.
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Tianrui Zhao <zhaotianrui@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
It goes without saying, but it is probably better to spell it out:
If userspace tries to restore and VM, but creates vcpus and/or RDs
in a different order, the vcpu/RD mapping will be different. Yes,
our API is an ugly piece of crap and I can't believe that we missed
this.
If we want to relax the above, we'll need to define a new userspace
API that allows the mapping to be specified, rather than relying
on the kernel to perform the mapping on its own.
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230927090911.3355209-12-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Update the documentation for the KVM_SET_PMU_EVENT_FILTER ioctl
to include a detailed description of how fixed performance events
are handled in the pmu filter. The action and fixed_counter_bitmap
members of the pmu filter to determine whether fixed performance
events can be programmed by the guest. This information is helpful
for correctly configuring the fixed_counter_bitmap and action fields
to filter fixed performance events.
Suggested-by: Like Xu <likexu@tencent.com>
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/oe-kbuild-all/202304150850.rx4UDDsB-lkp@intel.com
Signed-off-by: Jinrong Liang <cloudliang@tencent.com>
Link: https://lore.kernel.org/r/20230531075052.43239-1-cloudliang@tencent.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
Linus Torvalds
Paolo Bonzini
Michael Roth
Joel Stanley
Carlos López
Marc Zyngier
Will Deacon
Michael Kelley
Sean Christopherson
Paul Durrant
Xiaoyao Li
Brijesh Singh
Tom Lendacky
Chao Peng
Oliver Upton
Jing Zhang
Tianrui Zhao
Jinrong Liang
