aboutsummaryrefslogtreecommitdiff
path: root/Documentation
AgeCommit message (Collapse)AuthorFilesLines
2020-08-12Merge tag 'clk-for-linus' of ↵Gravatar Linus Torvalds 8-209/+293
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull more clk updates from Stephen Boyd: "Here's some more updates that missed the last pull request because I happened to tag the tree at an earlier point in the history of clk-next. I must have fat fingered it and checked out an older version of clk-next on this second computer I'm using. This time it actually includes more code for Qualcomm SoCs, the AT91 major updates, and some Rockchip SoC clk driver updates as well. I've corrected this flow so this shouldn't happen again" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (83 commits) clk: bcm2835: Do not use prediv with bcm2711's PLLs clk: drop unused function __clk_get_flags clk: hsdk: Fix bad dependency on IOMEM dt-bindings: clock: Fix YAML schemas for LPASS clocks on SC7180 clk: mmp: avoid missing prototype warning clk: sparx5: Add Sparx5 SoC DPLL clock driver dt-bindings: clock: sparx5: Add bindings include file clk: qoriq: add LS1021A core pll mux options clk: clk-atlas6: fix return value check in atlas6_clk_init() clk: tegra: pll: Improve PLLM enable-state detection clk: X1000: Add support for calculat REFCLK of USB PHY. clk: JZ4780: Reformat the code to align it. clk: JZ4780: Add functions for enable and disable USB PHY. clk: Ingenic: Add RTC related clocks for Ingenic SoCs. dt-bindings: clock: Add tabs to align code. dt-bindings: clock: Add RTC related clocks for Ingenic SoCs. clk: davinci: Use fallthrough pseudo-keyword clk: imx: Use fallthrough pseudo-keyword clk: qcom: gcc-sdm660: Fix up gcc_mss_mnoc_bimc_axi_clk clk: qcom: gcc-sdm660: Add missing modem reset ...
2020-08-12Merge tag 'linux-watchdog-5.9-rc1' of ↵Gravatar Linus Torvalds 9-55/+164
git://www.linux-watchdog.org/linux-watchdog Pull watchdog updates from Wim Van Sebroeck: - f71808e_wdt imporvements - dw_wdt improvements - mlx-wdt: support new watchdog type with longer timeout period - fallthrough pseudo-keyword replacements - overall small fixes and improvements * tag 'linux-watchdog-5.9-rc1' of git://www.linux-watchdog.org/linux-watchdog: (35 commits) watchdog: rti-wdt: balance pm runtime enable calls watchdog: rti-wdt: attach to running watchdog during probe watchdog: add support for adjusting last known HW keepalive time watchdog: use __watchdog_ping in startup watchdog: softdog: Add options 'soft_reboot_cmd' and 'soft_active_on_boot' watchdog: pcwd_usb: remove needless check before usb_free_coherent() watchdog: Replace HTTP links with HTTPS ones dt-bindings: watchdog: renesas,wdt: Document r8a774e1 support watchdog: initialize device before misc_register watchdog: booke_wdt: Add common nowayout parameter driver watchdog: scx200_wdt: Use fallthrough pseudo-keyword watchdog: Use fallthrough pseudo-keyword watchdog: f71808e_wdt: do stricter parameter validation watchdog: f71808e_wdt: clear watchdog timeout occurred flag watchdog: f71808e_wdt: remove use of wrong watchdog_info option watchdog: f71808e_wdt: indicate WDIOF_CARDRESET support in watchdog_info.options docs: watchdog: codify ident.options as superset of possible status flags dt-bindings: watchdog: Add compatible for QCS404, SC7180, SDM845, SM8150 dt-bindings: watchdog: Convert QCOM watchdog timer bindings to YAML watchdog: dw_wdt: Add DebugFS files ...
2020-08-12Merge branch 'akpm' (patches from Andrew)Gravatar Linus Torvalds 5-9/+51
Merge more updates from Andrew Morton: - most of the rest of MM (memcg, hugetlb, vmscan, proc, compaction, mempolicy, oom-kill, hugetlbfs, migration, thp, cma, util, memory-hotplug, cleanups, uaccess, migration, gup, pagemap), - various other subsystems (alpha, misc, sparse, bitmap, lib, bitops, checkpatch, autofs, minix, nilfs, ufs, fat, signals, kmod, coredump, exec, kdump, rapidio, panic, kcov, kgdb, ipc). * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (164 commits) mm/gup: remove task_struct pointer for all gup code mm: clean up the last pieces of page fault accountings mm/xtensa: use general page fault accounting mm/x86: use general page fault accounting mm/sparc64: use general page fault accounting mm/sparc32: use general page fault accounting mm/sh: use general page fault accounting mm/s390: use general page fault accounting mm/riscv: use general page fault accounting mm/powerpc: use general page fault accounting mm/parisc: use general page fault accounting mm/openrisc: use general page fault accounting mm/nios2: use general page fault accounting mm/nds32: use general page fault accounting mm/mips: use general page fault accounting mm/microblaze: use general page fault accounting mm/m68k: use general page fault accounting mm/ia64: use general page fault accounting mm/hexagon: use general page fault accounting mm/csky: use general page fault accounting ...
2020-08-12coredump: add %f for executable filenameGravatar Lepton Wu 1-1/+2
The document reads "%e" should be "executable filename" while actually it could be changed by things like pr_ctl PR_SET_NAME. People who uses "%e" in core_pattern get surprised when they find out they get thread name instead of executable filename. This is either a bug of document or a bug of code. Since the behavior of "%e" is there for long time, it could bring another surprise for users if we "fix" the code. So we just "fix" the document. And more, for users who really need the "executable filename" in core_pattern, we introduce a new "%f" for the real executable filename. We already have "%E" for executable path in kernel, so just reuse most of its code for the new added "%f" format. Signed-off-by: Lepton Wu <ytht.net@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/r/20200701031432.2978761-1-ytht.net@gmail.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-12mm/vmstat: add events for THP migration without splitGravatar Anshuman Khandual 1-0/+27
Add following new vmstat events which will help in validating THP migration without split. Statistics reported through these new VM events will help in performance debugging. 1. THP_MIGRATION_SUCCESS 2. THP_MIGRATION_FAILURE 3. THP_MIGRATION_SPLIT In addition, these new events also update normal page migration statistics appropriately via PGMIGRATE_SUCCESS and PGMIGRATE_FAILURE. While here, this updates current trace event 'mm_migrate_pages' to accommodate now available THP statistics. [akpm@linux-foundation.org: s/hpage_nr_pages/thp_nr_pages/] [ziy@nvidia.com: v2] Link: http://lkml.kernel.org/r/C5E3C65C-8253-4638-9D3C-71A61858BB8B@nvidia.com [anshuman.khandual@arm.com: s/thp_nr_pages/hpage_nr_pages/] Link: http://lkml.kernel.org/r/1594287583-16568-1-git-send-email-anshuman.khandual@arm.com Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com> Signed-off-by: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: Hugh Dickins <hughd@google.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Zi Yan <ziy@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Link: http://lkml.kernel.org/r/1594080415-27924-1-git-send-email-anshuman.khandual@arm.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-12doc, mm: clarify /proc/<pid>/oom_score value rangeGravatar Michal Hocko 1-0/+3
The exported value includes oom_score_adj so the range is no [0, 1000] as described in the previous section but rather [0, 2000]. Mention that fact explicitly. Signed-off-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: David Rientjes <rientjes@google.com> Cc: Yafang Shao <laoar.shao@gmail.com> Link: http://lkml.kernel.org/r/20200709062603.18480-2-mhocko@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-12doc, mm: sync up oom_score_adj documentationGravatar Michal Hocko 1-8/+0
There are at least two notes in the oom section. The 3% discount for root processes is gone since d46078b28889 ("mm, oom: remove 3% bonus for CAP_SYS_ADMIN processes"). Likewise children of the selected oom victim are not sacrificed since bbbe48029720 ("mm, oom: remove 'prefer children over parent' heuristic") Drop both of them. Signed-off-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: David Rientjes <rientjes@google.com> Cc: Yafang Shao <laoar.shao@gmail.com> Link: http://lkml.kernel.org/r/20200709062603.18480-1-mhocko@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-12mm: proactive compactionGravatar Nitin Gupta 1-0/+15
For some applications, we need to allocate almost all memory as hugepages. However, on a running system, higher-order allocations can fail if the memory is fragmented. Linux kernel currently does on-demand compaction as we request more hugepages, but this style of compaction incurs very high latency. Experiments with one-time full memory compaction (followed by hugepage allocations) show that kernel is able to restore a highly fragmented memory state to a fairly compacted memory state within <1 sec for a 32G system. Such data suggests that a more proactive compaction can help us allocate a large fraction of memory as hugepages keeping allocation latencies low. For a more proactive compaction, the approach taken here is to define a new sysctl called 'vm.compaction_proactiveness' which dictates bounds for external fragmentation which kcompactd tries to maintain. The tunable takes a value in range [0, 100], with a default of 20. Note that a previous version of this patch [1] was found to introduce too many tunables (per-order extfrag{low, high}), but this one reduces them to just one sysctl. Also, the new tunable is an opaque value instead of asking for specific bounds of "external fragmentation", which would have been difficult to estimate. The internal interpretation of this opaque value allows for future fine-tuning. Currently, we use a simple translation from this tunable to [low, high] "fragmentation score" thresholds (low=100-proactiveness, high=low+10%). The score for a node is defined as weighted mean of per-zone external fragmentation. A zone's present_pages determines its weight. To periodically check per-node score, we reuse per-node kcompactd threads, which are woken up every 500 milliseconds to check the same. If a node's score exceeds its high threshold (as derived from user-provided proactiveness value), proactive compaction is started until its score reaches its low threshold value. By default, proactiveness is set to 20, which implies threshold values of low=80 and high=90. This patch is largely based on ideas from Michal Hocko [2]. See also the LWN article [3]. Performance data ================ System: x64_64, 1T RAM, 80 CPU threads. Kernel: 5.6.0-rc3 + this patch echo madvise | sudo tee /sys/kernel/mm/transparent_hugepage/enabled echo madvise | sudo tee /sys/kernel/mm/transparent_hugepage/defrag Before starting the driver, the system was fragmented from a userspace program that allocates all memory and then for each 2M aligned section, frees 3/4 of base pages using munmap. The workload is mainly anonymous userspace pages, which are easy to move around. I intentionally avoided unmovable pages in this test to see how much latency we incur when hugepage allocations hit direct compaction. 1. Kernel hugepage allocation latencies With the system in such a fragmented state, a kernel driver then allocates as many hugepages as possible and measures allocation latency: (all latency values are in microseconds) - With vanilla 5.6.0-rc3 percentile latency –––––––––– ––––––– 5 7894 10 9496 25 12561 30 15295 40 18244 50 21229 60 27556 75 30147 80 31047 90 32859 95 33799 Total 2M hugepages allocated = 383859 (749G worth of hugepages out of 762G total free => 98% of free memory could be allocated as hugepages) - With 5.6.0-rc3 + this patch, with proactiveness=20 sysctl -w vm.compaction_proactiveness=20 percentile latency –––––––––– ––––––– 5 2 10 2 25 3 30 3 40 3 50 4 60 4 75 4 80 4 90 5 95 429 Total 2M hugepages allocated = 384105 (750G worth of hugepages out of 762G total free => 98% of free memory could be allocated as hugepages) 2. JAVA heap allocation In this test, we first fragment memory using the same method as for (1). Then, we start a Java process with a heap size set to 700G and request the heap to be allocated with THP hugepages. We also set THP to madvise to allow hugepage backing of this heap. /usr/bin/time java -Xms700G -Xmx700G -XX:+UseTransparentHugePages -XX:+AlwaysPreTouch The above command allocates 700G of Java heap using hugepages. - With vanilla 5.6.0-rc3 17.39user 1666.48system 27:37.89elapsed - With 5.6.0-rc3 + this patch, with proactiveness=20 8.35user 194.58system 3:19.62elapsed Elapsed time remains around 3:15, as proactiveness is further increased. Note that proactive compaction happens throughout the runtime of these workloads. The situation of one-time compaction, sufficient to supply hugepages for following allocation stream, can probably happen for more extreme proactiveness values, like 80 or 90. In the above Java workload, proactiveness is set to 20. The test starts with a node's score of 80 or higher, depending on the delay between the fragmentation step and starting the benchmark, which gives more-or-less time for the initial round of compaction. As t he benchmark consumes hugepages, node's score quickly rises above the high threshold (90) and proactive compaction starts again, which brings down the score to the low threshold level (80). Repeat. bpftrace also confirms proactive compaction running 20+ times during the runtime of this Java benchmark. kcompactd threads consume 100% of one of the CPUs while it tries to bring a node's score within thresholds. Backoff behavior ================ Above workloads produce a memory state which is easy to compact. However, if memory is filled with unmovable pages, proactive compaction should essentially back off. To test this aspect: - Created a kernel driver that allocates almost all memory as hugepages followed by freeing first 3/4 of each hugepage. - Set proactiveness=40 - Note that proactive_compact_node() is deferred maximum number of times with HPAGE_FRAG_CHECK_INTERVAL_MSEC of wait between each check (=> ~30 seconds between retries). [1] https://patchwork.kernel.org/patch/11098289/ [2] https://lore.kernel.org/linux-mm/20161230131412.GI13301@dhcp22.suse.cz/ [3] https://lwn.net/Articles/817905/ Signed-off-by: Nitin Gupta <nigupta@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Oleksandr Natalenko <oleksandr@redhat.com> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Khalid Aziz <khalid.aziz@oracle.com> Reviewed-by: Oleksandr Natalenko <oleksandr@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Khalid Aziz <khalid.aziz@oracle.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: David Rientjes <rientjes@google.com> Cc: Nitin Gupta <ngupta@nitingupta.dev> Cc: Oleksandr Natalenko <oleksandr@redhat.com> Link: http://lkml.kernel.org/r/20200616204527.19185-1-nigupta@nvidia.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-12mm: memcg/percpu: per-memcg percpu memory statisticsGravatar Roman Gushchin 1-0/+4
Percpu memory can represent a noticeable chunk of the total memory consumption, especially on big machines with many CPUs. Let's track percpu memory usage for each memcg and display it in memory.stat. A percpu allocation is usually scattered over multiple pages (and nodes), and can be significantly smaller than a page. So let's add a byte-sized counter on the memcg level: MEMCG_PERCPU_B. Byte-sized vmstat infra created for slabs can be perfectly reused for percpu case. [guro@fb.com: v3] Link: http://lkml.kernel.org/r/20200623184515.4132564-4-guro@fb.com Signed-off-by: Roman Gushchin <guro@fb.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Shakeel Butt <shakeelb@google.com> Acked-by: Dennis Zhou <dennis@kernel.org> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@kernel.org> Cc: Pekka Enberg <penberg@kernel.org> Cc: Tejun Heo <tj@kernel.org> Cc: Tobin C. Harding <tobin@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Waiman Long <longman@redhat.com> Cc: Bixuan Cui <cuibixuan@huawei.com> Cc: Michal Koutný <mkoutny@suse.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Link: http://lkml.kernel.org/r/20200608230819.832349-4-guro@fb.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-12rtc: pcf2127: add pca2129 device idGravatar Liam Beguin 1-0/+2
The PCA2129 is the automotive grade version of the PCF2129. add it to the list of compatibles. Signed-off-by: Liam Beguin <lvb@xiphos.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Reviewed-by: Bruno Thomsen <bruno.thomsen@gmail.com> Link: https://lore.kernel.org/r/20200630024211.12782-2-liambeguin@gmail.com
2020-08-11Merge tag 'zonefs-5.9-rc1' of ↵Gravatar Linus Torvalds 1-10/+12
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs Pull zonefs update from Damien Le Moal: "A single change for this cycle adding support for zone capacities smaller than the zone size, from Johannes" * tag 'zonefs-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs: zonefs: update documentation to reflect zone size vs capacity zonefs: add zone-capacity support
2020-08-11Merge tag 'iommu-updates-v5.9' of ↵Gravatar Linus Torvalds 6-4/+41
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull iommu updates from Joerg Roedel: - Remove of the dev->archdata.iommu (or similar) pointers from most architectures. Only Sparc is left, but this is private to Sparc as their drivers don't use the IOMMU-API. - ARM-SMMU updates from Will Deacon: - Support for SMMU-500 implementation in Marvell Armada-AP806 SoC - Support for SMMU-500 implementation in NVIDIA Tegra194 SoC - DT compatible string updates - Remove unused IOMMU_SYS_CACHE_ONLY flag - Move ARM-SMMU drivers into their own subdirectory - Intel VT-d updates from Lu Baolu: - Misc tweaks and fixes for vSVA - Report/response page request events - Cleanups - Move the Kconfig and Makefile bits for the AMD and Intel drivers into their respective subdirectory. - MT6779 IOMMU Support - Support for new chipsets in the Renesas IOMMU driver - Other misc cleanups and fixes (e.g. to improve compile test coverage) * tag 'iommu-updates-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (77 commits) iommu/amd: Move Kconfig and Makefile bits down into amd directory iommu/vt-d: Move Kconfig and Makefile bits down into intel directory iommu/arm-smmu: Move Arm SMMU drivers into their own subdirectory iommu/vt-d: Skip TE disabling on quirky gfx dedicated iommu iommu: Add gfp parameter to io_pgtable_ops->map() iommu: Mark __iommu_map_sg() as static iommu/vt-d: Rename intel-pasid.h to pasid.h iommu/vt-d: Add page response ops support iommu/vt-d: Report page request faults for guest SVA iommu/vt-d: Add a helper to get svm and sdev for pasid iommu/vt-d: Refactor device_to_iommu() helper iommu/vt-d: Disable multiple GPASID-dev bind iommu/vt-d: Warn on out-of-range invalidation address iommu/vt-d: Fix devTLB flush for vSVA iommu/vt-d: Handle non-page aligned address iommu/vt-d: Fix PASID devTLB invalidation iommu/vt-d: Remove global page support in devTLB flush iommu/vt-d: Enforce PASID devTLB field mask iommu: Make some functions static iommu/amd: Remove double zero check ...
2020-08-11Merge tag 'backlight-next-5.9' of ↵Gravatar Linus Torvalds 2-0/+13
git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight Pull backlight updates from Lee Jones: "Core Framework: - Trivial: Code refactoring - New API backlight_is_blank() - New API backlight_get_brightness() - Additional/reworked documentation - Remove 'extern' labels from prototypes - Drop backlight_put() - Staticify of_find_backlight() Driver Removal: - Removal of unused OT200 driver - Removal of unused Generic Backlight driver Fix-ups - Bunch of W=1 warning fixes - Convert to GPIO descriptors; sky81452 - Move platform data handling into driver; sky81452 - Remove superfluous code; lms501kf03 - Many instances of using new APIs" * tag 'backlight-next-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight: (34 commits) video: backlight: cr_bllcd: Remove unused variable 'intensity' backlight: backlight: Make of_find_backlight static backlight: backlight: Drop backlight_put() backlight: Use backlight_get_brightness() throughout backlight: jornada720_bl: Introduce backlight_is_blank() backlight: gpio_backlight: Simplify update_status() backlight: cr_bllcd: Introduce gpio-backlight semantics backlight: as3711_bl: Simplify update_status backlight: backlight: Introduce backlight_get_brightness() doc-rst: Wire-up Backlight kernel-doc documentation backlight: backlight: Add overview and update existing doc backlight: backlight: Drop extern from prototypes backlight: generic_bl: Remove this driver as it is unused backlight: backlight: Document enums in backlight.h backlight: backlight: Document inline functions in backlight.h backlight: backlight: Improve backlight_device documentation backlight: backlight: Improve backlight_properties documentation backlight: backlight: Improve backlight_ops documentation backlight: backlight: Add backlight_is_blank() backlight: backlight: Refactor fb_notifier_callback() ...
2020-08-11Merge tag 'hwlock-v5.9' of ↵Gravatar Linus Torvalds 2-39/+42
git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc Pull hwspinlock updates from Bjorn Andersson: "This introduces a new DT binding format to describe the Qualcomm hardware mutex block and deprecates the old, invalid, one. It also cleans up the Kconfig slightly" * tag 'hwlock-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc: dt-bindings: hwlock: qcom: Remove invalid binding hwspinlock: qcom: Allow mmio usage in addition to syscon dt-bindings: hwlock: qcom: Allow device on mmio bus dt-bindings: hwlock: qcom: Migrate binding to YAML hwspinlock: Simplify Kconfig
2020-08-11Merge tag 'rproc-v5.9' of ↵Gravatar Linus Torvalds 5-3/+276
git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc Pull remoteproc updates from Bjorn Andersson: "This introduces a new "detached" state for remote processors that are deemed to be running at the time Linux boots and the infrastructure for "attaching" to these. It then introduces the support for performing this operation for the STM32 platform. The coredump functionality is moved out from the core file and gains support for an optional mode where the recovery phase awaits the notification from devcoredump that the dump should be released. This allows userspace to grab the coredump in scenarios where vmalloc space is too low for creating a complete copy of the coredump before handing this to devcoredump. A new character device based interface is introduced to allow tying the stoppage of a remote processor to the termination of a user space process. This is useful in situations when such process provides crucial resources/operations for the firmware running on the remote processor. The Texas Instrument K3 driver gains support for the C66x and C71x DSPs. Qualcomm remoteprocs gains support for stashing relocation information in IMEM, to aid post mortem debugging and the crash notification mechanism is generalized to be reusable in cases where loosely coupled drivers needs to know about the status of a remote processor. One such example is the IPA hardware block, which is jointly owned with the modem and migrated to this improved interface. It also introduces a number of bug fixes and debug improvements for the Qualcomm modem remoteproc driver. And it cleans up the inconsistent interface for remoteproc drivers to implement power management" * tag 'rproc-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc: (56 commits) remoteproc: core: Register the character device interface remoteproc: Add remoteproc character device interface remoteproc: kill IPA notify code net: ipa: new notification infrastructure remoteproc: k3-dsp: Add support for C71x DSPs dt-bindings: remoteproc: k3-dsp: Update bindings for C71x DSPs remoteproc: k3-dsp: Add support for L2RAM loading on C66x DSPs remoteproc: k3-dsp: Add a remoteproc driver of K3 C66x DSPs dt-bindings: remoteproc: Add bindings for C66x DSPs on TI K3 SoCs remoteproc: k3: Add TI-SCI processor control helper functions remoteproc: Introduce rproc_of_parse_firmware() helper dt-bindings: arm: keystone: Add common TI SCI bindings remoteproc: qcom_q6v5_mss: Remove redundant running state remoteproc: qcom: q6v5: Update running state before requesting stop remoteproc: qcom_q6v5_mss: Add modem debug policy support remoteproc: qcom_q6v5_mss: Validate modem blob firmware size before load remoteproc: qcom_q6v5_mss: Validate MBA firmware size before load rpmsg: update documentation remoteproc: qcom_q6v5_mss: Add MBA log extraction support remoteproc: Add coredump debugfs entry ...
2020-08-11Merge tag 'libnvdimm-for-5.9' of ↵Gravatar Linus Torvalds 3-0/+107
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm updayes from Vishal Verma: "You'd normally receive this pull request from Dan Williams, but he's busy watching a newborn (Congrats Dan!), so I'm watching libnvdimm this cycle. This adds a new feature in libnvdimm - 'Runtime Firmware Activation', and a few small cleanups and fixes in libnvdimm and DAX. I'd originally intended to make separate topic-based pull requests - one for libnvdimm, and one for DAX, but some of the DAX material fell out since it wasn't quite ready. Summary: - add 'Runtime Firmware Activation' support for NVDIMMs that advertise the relevant capability - misc libnvdimm and DAX cleanups" * tag 'libnvdimm-for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: libnvdimm/security: ensure sysfs poll thread woke up and fetch updated attr libnvdimm/security: the 'security' attr never show 'overwrite' state libnvdimm/security: fix a typo ACPI: NFIT: Fix ARS zero-sized allocation dax: Fix incorrect argument passed to xas_set_err() ACPI: NFIT: Add runtime firmware activate support PM, libnvdimm: Add runtime firmware activation support libnvdimm: Convert to DEVICE_ATTR_ADMIN_RO() drivers/dax: Expand lock scope to cover the use of addresses fs/dax: Remove unused size parameter dax: print error message by pr_info() in __generic_fsdax_supported() driver-core: Introduce DEVICE_ATTR_ADMIN_{RO,RW} tools/testing/nvdimm: Emulate firmware activation commands tools/testing/nvdimm: Prepare nfit_ctl_test() for ND_CMD_CALL emulation tools/testing/nvdimm: Add command debug messages tools/testing/nvdimm: Cleanup dimm index passing ACPI: NFIT: Define runtime firmware activation commands ACPI: NFIT: Move bus_dsm_mask out of generic nvdimm_bus_descriptor libnvdimm: Validate command family indices
2020-08-11doc/zh_CN: resolve undefined label warning in admin-guide indexGravatar Lukas Bulwahn 1-1/+1
Documentation generation warns: Documentation/translations/zh_CN/admin-guide/index.rst:3: WARNING: undefined label: documentation/admin-guide/index.rst Use doc reference for .rst files to resolve the warning. Fixes: 37a607cf2318 ("doc/zh_CN: add admin-guide index") Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Link: https://lore.kernel.org/r/20200802161956.18268-1-lukas.bulwahn@gmail.com Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2020-08-11doc/zh_CN: fix title heading markup in admin-guide cpu-loadGravatar Lukas Bulwahn 1-2/+2
Documentation generation warns: Documentation/translations/zh_CN/admin-guide/cpu-load.rst:1: WARNING: Title overline too short. Extend title heading markup by one. It was just off by one. Fixes: e210c66d567c ("doc/zh_CN: add cpu-load Chinese version") Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Acked-by: Tao Zhou <ouwen210@hotmail.com> Link: https://lore.kernel.org/r/20200802162101.18875-1-lukas.bulwahn@gmail.com Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2020-08-11docs: remove the 2.6 "Upgrading I2C Drivers" guideGravatar Stephen Kitt 2-286/+0
All the drivers have long since been upgraded, and all the important information here is also included in the "Implementing I2C device drivers" guide. Signed-off-by: Stephen Kitt <steve@sk2.org> Reviewed-by: Wolfram Sang <wsa@kernel.org> Link: https://lore.kernel.org/r/20200806161456.8680-1-steve@sk2.org Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2020-08-11docs: Correct the release date of 5.2 stableGravatar Billy Wilson 1-1/+1
A table lists the 5.2 stable release date as September 15, but it was released on July 7. This may confuse a reader who is trying to understand the stable update release cycle. Signed-off-by: Billy Wilson <billy_wilson@byu.edu> Link: https://lore.kernel.org/r/20200806231754.7735-1-billy_wilson@byu.edu Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2020-08-11docs: cdrom: Fix a typo and rst markupGravatar Remi Andruccioli 1-2/+2
"The capability fags" should be "The capability flags". In rst markup, a incorrect markup expression is causing bad rendering in Sphinx output. Replace the erroneous single quote by a backquote. Signed-off-by: Remi Andruccioli <remi.andruccioli@gmail.com> Link: https://lore.kernel.org/r/20200808163123.17643-1-remi.andruccioli@gmail.com Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2020-08-11Doc: admin-guide: use correct legends in kernel-parameters.txtGravatar Randy Dunlap 1-18/+18
Documentation/admin-guide/kernel-parameters.rst includes a legend telling us what configurations or hardware platforms are relevant for certain boot options. For X86, it is spelled "X86" and for x86_64, it is spelled "X86-64", so make corrections for those. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: linux-doc@vger.kernel.org Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: x86@kernel.org Link: https://lore.kernel.org/r/20200810024941.30231-1-rdunlap@infradead.org Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2020-08-11Documentation/features: refresh RISC-V arch support filesGravatar Tobias Klauser 4-4/+4
Support for these was added by the following commits: f2c9699f6555 ("riscv: Add STACKPROTECTOR supported") 3c4697982982 ("riscv: Enable LOCKDEP_SUPPORT & fixup TRACE_IRQFLAGS_SUPPORT"). ed48b297fe21 ("riscv: Enable context tracking") cbb3d91d3bcf ("riscv: Add kmemleak support") Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Link: https://lore.kernel.org/r/20200810095000.32092-1-tklauser@distanz.ch Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2020-08-11documentation: coccinelle: Improve command example for make C={1,2}Gravatar Sumera Priyadarsini 1-4/+11
Modify coccinelle documentation to further clarify the usage of the makefile C variable by coccicheck. Signed-off-by: Sumera Priyadarsini <sylphrenadin@gmail.com> Acked-by: Julia Lawall <julia.lawall@inria.fr> Link: https://lore.kernel.org/r/20200811002350.5553-1-sylphrenadin@gmail.com Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2020-08-11Core-api: Documentation: Replace deprecated :c:func: UsageGravatar Puranjay Mohan 1-16/+16
Replace :c:func: with func() as the previous usage is deprecated. Signed-off-by: Puranjay Mohan <puranjay12@gmail.com> Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org> Link: https://lore.kernel.org/r/20200810183019.22170-1-puranjay12@gmail.com Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2020-08-11Dev-tools: Documentation: Replace deprecated :c:func: UsageGravatar Puranjay Mohan 1-8/+8
Replace :c:func: with func() as the previous usage is deprecated. Signed-off-by: Puranjay Mohan <puranjay12@gmail.com> Link: https://lore.kernel.org/r/20200810183613.25643-1-puranjay12@gmail.com Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2020-08-11Filesystems: Documentation: Replace deprecated :c:func: UsageGravatar Puranjay Mohan 1-33/+33
Replace :c:func: with func() as the previous usage is deprecated. Signed-off-by: Puranjay Mohan <puranjay12@gmail.com> Link: https://lore.kernel.org/r/20200810184828.29297-1-puranjay12@gmail.com Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2020-08-11docs: trace: fix a typoGravatar Bryan Brattlof 1-1/+1
emumerated -> enumerated Signed-off-by: Bryan Brattlof <hello@bryanbrattlof.com> Link: https://lore.kernel.org/r/87lfili2d8.fsf@bryanbrattlof.com Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2020-08-11cpufreq: intel_pstate: Implement passive mode with HWP enabledGravatar Rafael J. Wysocki 1-46/+43
Allow intel_pstate to work in the passive mode with HWP enabled and make it set the HWP minimum performance limit (HWP floor) to the P-state value given by the target frequency supplied by the cpufreq governor, so as to prevent the HWP algorithm and the CPU scheduler from working against each other, at least when the schedutil governor is in use, and update the intel_pstate documentation accordingly. Among other things, this allows utilization clamps to be taken into account, at least to a certain extent, when intel_pstate is in use and makes it more likely that sufficient capacity for deadline tasks will be provided. After this change, the resulting behavior of an HWP system with intel_pstate in the passive mode should be close to the behavior of the analogous non-HWP system with intel_pstate in the passive mode, except that the HWP algorithm is generally allowed to make the CPU run at a frequency above the floor P-state set by intel_pstate in the entire available range of P-states, while without HWP a CPU can run in a P-state above the requested one if the latter falls into the range of turbo P-states (referred to as the turbo range) or if the P-states of all CPUs in one package are coordinated with each other at the hardware level. [Note that in principle the HWP floor may not be taken into account by the processor if it falls into the turbo range, in which case the processor has a license to choose any P-state, either below or above the HWP floor, just like a non-HWP processor in the case when the target P-state falls into the turbo range.] With this change applied, intel_pstate in the passive mode assumes complete control over the HWP request MSR and concurrent changes of that MSR (eg. via the direct MSR access interface) are overridden by it. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Reviewed-by: Francisco Jerez <currojerez@riseup.net>
2020-08-11zonefs: update documentation to reflect zone size vs capacityGravatar Johannes Thumshirn 1-10/+12
Update the zonefs documentation to reflect the difference between a zone's size and it's capacity. The maximum file size in zonefs is the zones capacity, for ZBC and ZAC based devices, which do not have a separate zone capacity, the zone capacity is equal to the zone size. Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
2020-08-10Merge tag 'locking-urgent-2020-08-10' of ↵Gravatar Linus Torvalds 1-0/+52
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking updates from Thomas Gleixner: "A set of locking fixes and updates: - Untangle the header spaghetti which causes build failures in various situations caused by the lockdep additions to seqcount to validate that the write side critical sections are non-preemptible. - The seqcount associated lock debug addons which were blocked by the above fallout. seqcount writers contrary to seqlock writers must be externally serialized, which usually happens via locking - except for strict per CPU seqcounts. As the lock is not part of the seqcount, lockdep cannot validate that the lock is held. This new debug mechanism adds the concept of associated locks. sequence count has now lock type variants and corresponding initializers which take a pointer to the associated lock used for writer serialization. If lockdep is enabled the pointer is stored and write_seqcount_begin() has a lockdep assertion to validate that the lock is held. Aside of the type and the initializer no other code changes are required at the seqcount usage sites. The rest of the seqcount API is unchanged and determines the type at compile time with the help of _Generic which is possible now that the minimal GCC version has been moved up. Adding this lockdep coverage unearthed a handful of seqcount bugs which have been addressed already independent of this. While generally useful this comes with a Trojan Horse twist: On RT kernels the write side critical section can become preemtible if the writers are serialized by an associated lock, which leads to the well known reader preempts writer livelock. RT prevents this by storing the associated lock pointer independent of lockdep in the seqcount and changing the reader side to block on the lock when a reader detects that a writer is in the write side critical section. - Conversion of seqcount usage sites to associated types and initializers" * tag 'locking-urgent-2020-08-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (25 commits) locking/seqlock, headers: Untangle the spaghetti monster locking, arch/ia64: Reduce <asm/smp.h> header dependencies by moving XTP bits into the new <asm/xtp.h> header x86/headers: Remove APIC headers from <asm/smp.h> seqcount: More consistent seqprop names seqcount: Compress SEQCNT_LOCKNAME_ZERO() seqlock: Fold seqcount_LOCKNAME_init() definition seqlock: Fold seqcount_LOCKNAME_t definition seqlock: s/__SEQ_LOCKDEP/__SEQ_LOCK/g hrtimer: Use sequence counter with associated raw spinlock kvm/eventfd: Use sequence counter with associated spinlock userfaultfd: Use sequence counter with associated spinlock NFSv4: Use sequence counter with associated spinlock iocost: Use sequence counter with associated spinlock raid5: Use sequence counter with associated spinlock vfs: Use sequence counter with associated spinlock timekeeping: Use sequence counter with associated raw spinlock xfrm: policy: Use sequence counters with associated lock netfilter: nft_set_rbtree: Use sequence counter with associated rwlock netfilter: conntrack: Use sequence counter with associated spinlock sched: tasks: Use sequence counter with associated spinlock ...
2020-08-10Merge tag 'f2fs-for-5.9-rc1' of ↵Gravatar Linus Torvalds 2-3/+7
git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs Pull f2fs updates from Jaegeuk Kim: "In this round, we've added two small interfaces: (a) GC_URGENT_LOW mode for performance and (b) F2FS_IOC_SEC_TRIM_FILE ioctl for security. The new GC mode allows Android to run some lower priority GCs in background, while new ioctl discards user information without race condition when the account is removed. In addition, some patches were merged to address latency-related issues. We've fixed some compression-related bug fixes as well as edge race conditions. Enhancements: - add GC_URGENT_LOW mode in gc_urgent - introduce F2FS_IOC_SEC_TRIM_FILE ioctl - bypass racy readahead to improve read latencies - shrink node_write lock coverage to avoid long latency Bug fixes: - fix missing compression flag control, i_size, and mount option - fix deadlock between quota writes and checkpoint - remove inode eviction path in synchronous path to avoid deadlock - fix to wait GCed compressed page writeback - fix a kernel panic in f2fs_is_compressed_page - check page dirty status before writeback - wait page writeback before update in node page write flow - fix a race condition between f2fs_write_end_io and f2fs_del_fsync_node_entry We've added some minor sanity checks and refactored trivial code blocks for better readability and debugging information" * tag 'f2fs-for-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (52 commits) f2fs: prepare a waiter before entering io_schedule f2fs: update_sit_entry: Make the judgment condition of f2fs_bug_on more intuitive f2fs: replace test_and_set/clear_bit() with set/clear_bit() f2fs: make file immutable even if releasing zero compression block f2fs: compress: disable compression mount option if compression is off f2fs: compress: add sanity check during compressed cluster read f2fs: use macro instead of f2fs verity version f2fs: fix deadlock between quota writes and checkpoint f2fs: correct comment of f2fs_exist_written_data f2fs: compress: delay temp page allocation f2fs: compress: fix to update isize when overwriting compressed file f2fs: space related cleanup f2fs: fix use-after-free issue f2fs: Change the type of f2fs_flush_inline_data() to void f2fs: add F2FS_IOC_SEC_TRIM_FILE ioctl f2fs: should avoid inode eviction in synchronous path f2fs: segment.h: delete a duplicated word f2fs: compress: fix to avoid memory leak on cc->cpages f2fs: use generic names for generic ioctls f2fs: don't keep meta inode pages used for compressed block migration ...
2020-08-10Merge branch 'for-linus' of ↵Gravatar Linus Torvalds 4-29/+76
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: - an update to Elan touchpad controller driver supporting newer ICs with enhanced precision reports and a new firmware update process - an update to EXC3000 touch controller supporting additional parts - assorted driver fixups * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (27 commits) Input: exc3000 - add support to query model and fw_version Input: exc3000 - add reset gpio support Input: exc3000 - add EXC80H60 and EXC80H84 support dt-bindings: touchscreen: Convert EETI EXC3000 touchscreen to json-schema Input: sentelic - fix error return when fsp_reg_write fails Input: alps - remove redundant assignment to variable ret Input: ims-pcu - return error code rather than -ENOMEM Input: elan_i2c - add ic type 0x15 Input: atmel_mxt_ts - only read messages in mxt_acquire_irq() when necessary Input: uinput - fix typo in function name documentation Input: ati_remote2 - add missing newlines when printing module parameters Input: psmouse - add a newline when printing 'proto' by sysfs Input: synaptics-rmi4 - drop a duplicated word Input: elan_i2c - add support for high resolution reports Input: elan_i2c - do not constantly re-query pattern ID Input: elan_i2c - add firmware update info for ICs 0x11, 0x13, 0x14 Input: elan_i2c - handle firmware updated on newer ICs Input: elan_i2c - add support for different firmware page sizes Input: elan_i2c - fix detecting IAP version on older controllers Input: elan_i2c - handle devices with patterns above 1 ...
2020-08-10dt-bindings: lpspi: Add missing boolean type for fsl,spi-only-use-cs1-selGravatar Geert Uytterhoeven 1-0/+1
When running "make dt_binding_check" (even if restricted to an unrelated binding document using DT_SCHEMA_FILES=...): Documentation/devicetree/bindings/spi/spi-fsl-lpspi.yaml: ignoring, error in schema: properties: fsl,spi-only-use-cs1-sel warning: no schema found in file: Documentation/devicetree/bindings/spi/spi-fsl-lpspi.yaml Fix this by adding a proper type definition for the vendor-specific fsl,spi-only-use-cs1-sel property. Fixes: 7ac9bbf6ab3085c2 ("dt-bindings: lpspi: New property in document DT bindings for LPSPI") Suggested-by: Rob Herring <robh+dt@kernel.org> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20200807121057.14204-1-geert+renesas@glider.be Signed-off-by: Mark Brown <broonie@kernel.org>
2020-08-09Merge tag 'kbuild-v5.9' of ↵Gravatar Linus Torvalds 4-12/+55
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - run the checker (e.g. sparse) after the compiler - remove unneeded cc-option tests for old compiler flags - fix tar-pkg to install dtbs - introduce ccflags-remove-y and asflags-remove-y syntax - allow to trace functions in sub-directories of lib/ - introduce hostprogs-always-y and userprogs-always-y syntax - various Makefile cleanups * tag 'kbuild-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kbuild: stop filtering out $(GCC_PLUGINS_CFLAGS) from cc-option base kbuild: include scripts/Makefile.* only when relevant CONFIG is enabled kbuild: introduce hostprogs-always-y and userprogs-always-y kbuild: sort hostprogs before passing it to ifneq kbuild: move host .so build rules to scripts/gcc-plugins/Makefile kbuild: Replace HTTP links with HTTPS ones kbuild: trace functions in subdirectories of lib/ kbuild: introduce ccflags-remove-y and asflags-remove-y kbuild: do not export LDFLAGS_vmlinux kbuild: always create directories of targets powerpc/boot: add DTB to 'targets' kbuild: buildtar: add dtbs support kbuild: remove cc-option test of -ffreestanding kbuild: remove cc-option test of -fno-stack-protector Revert "kbuild: Create directory for target DTB" kbuild: run the checker after the compiler
2020-08-09Merge tag 'pinctrl-v5.9-1' of ↵Gravatar Linus Torvalds 8-169/+483
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "This is the bulk of the pin control changes for the v5.9 kernel series: Core changes: - The GPIO patch "gpiolib: Introduce for_each_requested_gpio_in_range() macro" was put in an immutable branch and merged into the pinctrl tree as well. We see these changes also here. - Improved debug output for pins used as GPIO. New drivers: - Ocelot Sparx5 SoC driver. - Intel Emmitsburg SoC subdriver. - Intel Tiger Lake-H SoC subdriver. - Qualcomm PM660 SoC subdriver. - Renesas SH-PFC R8A774E1 subdriver. Driver improvements: - Linear improvement and cleanups of the Intel drivers for Cherryview, Lynxpoint, Baytrail etc. Improved locking among other things. - Renesas SH-PFC has added support for RPC pins, groups, and functions to r8a77970 and r8a77980. - The newere Freescale (now NXP) i.MX8 pin controllers have been modularized. This is driven by the Google Android GKI initiative I think. - Open drain support for pins on the Qualcomm IPQ4019. - The Ingenic driver can handle both edges IRQ detection. - A big slew of documentation fixes all over the place. - A few irqchip template conversions by yours truly. * tag 'pinctrl-v5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (107 commits) dt-bindings: pinctrl: add bindings for MediaTek MT6779 SoC pinctrl: stmfx: Use irqchip template pinctrl: amd: Use irqchip template pinctrl: mediatek: fix build for tristate changes pinctrl: samsung: Use bank name as irqchip name pinctrl: core: print gpio in pins debugfs file pinctrl: mediatek: add mt6779 eint support pinctrl: mediatek: add pinctrl support for MT6779 SoC pinctrl: mediatek: avoid virtual gpio trying to set reg pinctrl: mediatek: update pinmux definitions for mt6779 pinctrl: stm32: use the hwspin_lock_timeout_in_atomic() API pinctrl: mcp23s08: Use irqchip template pinctrl: sx150x: Use irqchip template dt-bindings: ingenic,pinctrl: Support pinmux/pinconf nodes pinctrl: intel: Add Intel Emmitsburg pin controller support pinctl: ti: iodelay: Replace HTTP links with HTTPS ones Revert "gpio: omap: handle pin config bias flags" pinctrl: single: Use fallthrough pseudo-keyword pinctrl: qcom: spmi-gpio: Use fallthrough pseudo-keyword pinctrl: baytrail: Use fallthrough pseudo-keyword ...
2020-08-09Merge tag 'mtd/for-5.9' of ↵Gravatar Linus Torvalds 5-33/+323
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux Pull mtd updates from Miquel Raynal: "MTD core changes: - Spelling - http to https updates NAND core changes: - Drop useless 'depends on' in Kconfig - Add an extra level in the Kconfig hierarchy - Trivial spellings - Dynamic allocation of the interface configurations - Dropping the default ONFI timing mode - Various cleanup (types, structures, naming, comments) - Hide the chip->data_interface indirection - Add the generic rb-gpios property - Add the ->choose_interface_config() hook - Introduce nand_choose_best_sdr_timings() - Use default values for tPROG_max and tBERS_max - Avoid redefining tR_max and tCCS_min - Add a helper to find the closest ONFI mode - bcm63xx MTD parsers: simplify CFE detection Raw NAND controller drivers changes: - fsl-upm: Deprecation of specific DT properties - fsl_upm: Driver rework and cleanup in favor of ->exec_op() - Ingenic: Cleanup ARRAY_SIZE() vs sizeof() use - brcmnand: ECC error handling on EDU transfers - brcmnand: Don't default to EDU transfers - qcom: Set BAM mode only if not set already - qcom: Avoid write to unavailable register - gpio: Driver rework in favor of ->exec_op() - tango: ->exec_op() conversion - mtk: ->exec_op() conversion Raw NAND chip drivers changes: - toshiba: Implement ->choose_interface_config() for TH58NVG2S3HBAI4, TC58NVG0S3E, and TC58TEG5DCLTA00 - hynix: Implement ->choose_interface_config() for H27UCG8T2ATR-BC SPI NOR core changes: - Disable Quad Mode in spi_nor_restore(). - Don't abort BFPT parsing when QER reserved value is used. - Add support/update capabilities for few flashes. - Drop s70fl01gs flash: it does not support RDSR(05h) which is critical for erase/write. - Merge the SPIMEM DTR bits in spi-nor/next to avoid conflicts during the release cycle. SPI NOR controller drivers changes: - Move the cadence-quadspi driver to spi-mem. The series was taken through the SPI tree. Merge it also in spi-nor/next to avoid conflicts during the release cycle. - intel-spi: - Add new PCI IDs. - Ignore the Write Disable command, the controller doesn't support it. - Fix performance regression" * tag 'mtd/for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (79 commits) MTD: pfow.h: drop a duplicated word MTD: mtd-abi.h: drop a duplicated word mtd: rawnand: omap_elm: Replace HTTP links with HTTPS ones mtd: Replace HTTP links with HTTPS ones mtd: hyperbus: Replace HTTP links with HTTPS ones mtd: revert "spi-nor: intel: provide a range for poll_timout" mtd: spi-nor: update read capabilities for w25q64 and s25fl064k mtd: spi-nor: micron: Add SPI_NOR_DUAL_READ flag on mt25qu02g mtd: spi-nor: macronix: Add support for mx66u2g45g mtd: spi-nor: intel-spi: Simulate WRDI command mtd: spi-nor: Disable the flash quad mode in spi_nor_restore() mtd: spi-nor: Add capability to disable flash quad mode mtd: spi-nor: spansion: Remove s70fl01gs from flash_info mtd: spi-nor: sfdp: do not make invalid quad enable fatal dt-bindings: mtd: fsl-upm-nand: Deprecate chip-delay and fsl, upm-wait-flags mtd: rawnand: stm32_fmc2: get resources from parent node mtd: rawnand: stm32_fmc2: use regmap APIs memory: stm32-fmc2-ebi: add STM32 FMC2 EBI controller driver dt-bindings: memory-controller: add STM32 FMC2 EBI controller documentation dt-bindings: mtd: update STM32 FMC2 NAND controller documentation ...
2020-08-09Merge tag 'kvm-ppc-next-5.9-1' of ↵Gravatar Paolo Bonzini 1-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc into kvm-next-5.6 PPC KVM update for 5.9 - Improvements and bug-fixes for secure VM support, giving reduced startup time and memory hotplug support. - Locking fixes in nested KVM code - Increase number of guests supported by HV KVM to 4094 - Preliminary POWER10 support
2020-08-10kbuild: introduce hostprogs-always-y and userprogs-always-yGravatar Masahiro Yamada 1-1/+30
To build host programs, you need to add the program names to 'hostprogs' to use the necessary build rule, but it is not enough to build them because there is no dependency. There are two types of host programs: built as the prerequisite of another (e.g. gen_crc32table in lib/Makefile), or always built when Kbuild visits the Makefile (e.g. genksyms in scripts/genksyms/Makefile). The latter is typical in Makefiles under scripts/, which contains host programs globally used during the kernel build. To build them, you need to add them to both 'hostprogs' and 'always-y'. This commit adds hostprogs-always-y as a shorthand. The same applies to user programs. net/bpfilter/Makefile builds bpfilter_umh on demand, hence always-y is unneeded. In contrast, programs under samples/ are added to both 'userprogs' and 'always-y' so they are always built when Kbuild visits the Makefiles. userprogs-always-y works as a shorthand. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Acked-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
2020-08-10kbuild: Replace HTTP links with HTTPS onesGravatar Alexander A. Klimov 3-9/+9
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-08-10kbuild: introduce ccflags-remove-y and asflags-remove-yGravatar Masahiro Yamada 1-0/+14
CFLAGS_REMOVE_<file>.o filters out flags when compiling a particular object, but there is no convenient way to do that for every object in a directory. Add ccflags-remove-y and asflags-remove-y to make it easily. Use ccflags-remove-y to clean up some Makefiles. The add/remove order works as follows: [1] KBUILD_CFLAGS specifies compiler flags used globally [2] ccflags-y adds compiler flags for all objects in the current Makefile [3] ccflags-remove-y removes compiler flags for all objects in the current Makefile (New feature) [4] CFLAGS_<file> adds compiler flags per file. [5] CFLAGS_REMOVE_<file> removes compiler flags per file. Having [3] before [4] allows us to remove flags from most (but not all) objects in the current Makefile. For example, kernel/trace/Makefile removes $(CC_FLAGS_FTRACE) from all objects in the directory, then adds it back to trace_selftest_dynamic.o and CFLAGS_trace_kprobe_selftest.o The same applies to lib/livepatch/Makefile. Please note ccflags-remove-y has no effect to the sub-directories. In contrast, the previous notation got rid of compiler flags also from all the sub-directories. The following are not affected because they have no sub-directories: arch/arm/boot/compressed/ arch/powerpc/xmon/ arch/sh/ kernel/trace/ However, lib/ has several sub-directories. To keep the behavior, I added ccflags-remove-y to all Makefiles in subdirectories of lib/, except the following: lib/vdso/Makefile - Kbuild does not descend into this Makefile lib/raid/test/Makefile - This is not used for the kernel build I think commit 2464a609ded0 ("ftrace: do not trace library functions") excluded too much. In the next commit, I will remove ccflags-remove-y from the sub-directories of lib/. Suggested-by: Sami Tolvanen <samitolvanen@google.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Acked-by: Brendan Higgins <brendanhiggins@google.com> (KUnit) Tested-by: Anders Roxell <anders.roxell@linaro.org>
2020-08-08Merge tag 'for-linus-5.9-1' of git://github.com/cminyard/linux-ipmiGravatar Linus Torvalds 1-0/+4
Pull IPMI updates from Corey Minyard: "Minor cleanups to the IPMI driver for 5.9 Nothing of any major consequence. Duplicate code, some missing \n's in sysfs files, some documentation and comment changes" * tag 'for-linus-5.9-1' of git://github.com/cminyard/linux-ipmi: ipmi/watchdog: add missing newlines when printing parameters by sysfs ipmi: remve duplicate code in __ipmi_bmc_register() ipmi: ssif: Remove finished TODO comment about SMBus alert Doc: driver-api: ipmi: Add description of alerts_broken module param
2020-08-07Merge tag 'for-v5.9' of ↵Gravatar Linus Torvalds 9-130/+326
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply Pull power supply and reset updates from Sebastian Reichel: "Power-supply core: - add COOL/WARM/HOT state from JEITA JISC8712:2015 specification - convert simple-battery DT binding to YAML - add long-life charging mode Battery/charger drivers: - bq25150: new charger driver - bq27xxx: add support for BQ27z561 and BQ28z610 - max17040: support CAPACITY_ALERT_MIN - sbs-battery: add PEC support - wilco-ec: support long-life charging mode - bq25890: fix DT binding - misc. fixes and cleanups Reset drivers: - linkstation: new reset driver" * tag 'for-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (32 commits) power: supply: wilco_ec: Add long life charging mode power: supply: bq27xxx_battery: Add the BQ28z610 Battery monitor dt-bindings: power: Add BQ28z610 compatible power: supply: bq27xxx_battery: Add the BQ27Z561 Battery monitor dt-bindings: power: Add BQ27Z561 compatible power: supply: test_power: Fix battery_current initial value power: supply: Fix kerneldoc of power_supply_temp2resist_simple() power: supply: cpcap-battery: Fix kerneldoc of cpcap_battery_read_accumulated() dt-bindings: power: Convert battery.txt to battery.yaml power: supply: rt5033_battery: Fix error code in rt5033_battery_probe() power: supply: max17040: Add POWER_SUPPLY_PROP_CAPACITY_ALERT_MIN power: supply: check if calc_soc succeeded in pm860x_init_battery power: supply: bq2xxxx: Replace HTTP links with HTTPS ones power: reset: add driver for LinkStation power off power: supply: sc27xx: prevent adc * 1000 from overflow math64: New DIV_S64_ROUND_CLOSEST helper power: fix duplicated words in bq2415x_charger.h power: Convert to DEFINE_SHOW_ATTRIBUTE power: reset: keystone-reset: Replace HTTP links with HTTPS ones power: supply: bq25150 introduce the bq25150 ...
2020-08-07Merge tag 'pci-v5.9-changes' of ↵Gravatar Linus Torvalds 9-32/+330
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Enumeration: - Fix pci_cfg_wait queue locking problem (Bjorn Helgaas) - Convert PCIe capability PCIBIOS errors to errno (Bolarinwa Olayemi Saheed) - Align PCIe capability and PCI accessor return values (Bolarinwa Olayemi Saheed) - Fix pci_create_slot() reference count leak (Qiushi Wu) - Announce device after early fixups (Tiezhu Yang) PCI device hotplug: - Make rpadlpar functions static (Wei Yongjun) Driver binding: - Add device even if driver attach failed (Rajat Jain) Virtualization: - xen: Remove redundant initialization of irq (Colin Ian King) IOMMU: - Add pci_pri_supported() to check device or associated PF (Ashok Raj) - Release IVRS table in AMD ACS quirk (Hanjun Guo) - Mark AMD Navi10 GPU rev 0x00 ATS as broken (Kai-Heng Feng) - Treat "external-facing" devices themselves as internal (Rajat Jain) MSI: - Forward MSI-X error code in pci_alloc_irq_vectors_affinity() (Piotr Stankiewicz) Error handling: - Clear PCIe Device Status errors only if OS owns AER (Jonathan Cameron) - Log correctable errors as warning, not error (Matt Jolly) - Use 'pci_channel_state_t' instead of 'enum pci_channel_state' (Luc Van Oostenryck) Peer-to-peer DMA: - Allow P2PDMA on AMD Zen and newer CPUs (Logan Gunthorpe) ASPM: - Add missing newline in sysfs 'policy' (Xiongfeng Wang) Native PCIe controllers: - Convert to devm_platform_ioremap_resource_byname() (Dejin Zheng) - Convert to devm_platform_ioremap_resource() (Dejin Zheng) - Remove duplicate error message from devm_pci_remap_cfg_resource() callers (Dejin Zheng) - Fix runtime PM imbalance on error (Dinghao Liu) - Remove dev_err() when handing an error from platform_get_irq() (Krzysztof Wilczyński) - Use pci_host_bridge.windows list directly instead of splicing in a temporary list for cadence, mvebu, host-common (Rob Herring) - Use pci_host_probe() instead of open-coding all the pieces for altera, brcmstb, iproc, mobiveil, rcar, rockchip, tegra, v3, versatile, xgene, xilinx, xilinx-nwl (Rob Herring) - Default host bridge parent device to the platform device (Rob Herring) - Use pci_is_root_bus() instead of tracking root bus number separately in aardvark, designware (imx6, keystone, designware-host), mobiveil, xilinx-nwl, xilinx, rockchip, rcar (Rob Herring) - Set host bridge bus number in pci_scan_root_bus_bridge() instead of each driver for aardvark, designware-host, host-common, mediatek, rcar, tegra, v3-semi (Rob Herring) - Move DT resource setup into devm_pci_alloc_host_bridge() (Rob Herring) - Set bridge map_irq and swizzle_irq to default functions; drivers that don't support legacy IRQs (iproc) need to undo this (Rob Herring) ARM Versatile PCIe controller driver: - Drop flag PCI_ENABLE_PROC_DOMAINS (Rob Herring) Cadence PCIe controller driver: - Use "dma-ranges" instead of "cdns,no-bar-match-nbits" property (Kishon Vijay Abraham I) - Remove "mem" from reg binding (Kishon Vijay Abraham I) - Fix cdns_pcie_{host|ep}_setup() error path (Kishon Vijay Abraham I) - Convert all r/w accessors to perform only 32-bit accesses (Kishon Vijay Abraham I) - Add support to start link and verify link status (Kishon Vijay Abraham I) - Allow pci_host_bridge to have custom pci_ops (Kishon Vijay Abraham I) - Add new *ops* for CPU addr fixup (Kishon Vijay Abraham I) - Fix updating Vendor ID and Subsystem Vendor ID register (Kishon Vijay Abraham I) - Use bridge resources for outbound window setup (Rob Herring) - Remove private bus number and range storage (Rob Herring) Cadence PCIe endpoint driver: - Add MSI-X support (Alan Douglas) HiSilicon PCIe controller driver: - Remove non-ECAM HiSilicon hip05/hip06 driver (Rob Herring) Intel VMD host bridge driver: - Use Shadow MEMBAR registers for QEMU/KVM guests (Jon Derrick) Loongson PCIe controller driver: - Use DECLARE_PCI_FIXUP_EARLY for bridge_class_quirk() (Tiezhu Yang) Marvell Aardvark PCIe controller driver: - Indicate error in 'val' when config read fails (Pali Rohár) - Don't touch PCIe registers if no card connected (Pali Rohár) Marvell MVEBU PCIe controller driver: - Setup BAR0 in order to fix MSI (Shmuel Hazan) Microsoft Hyper-V host bridge driver: - Fix a timing issue which causes kdump to fail occasionally (Wei Hu) - Make some functions static (Wei Yongjun) NVIDIA Tegra PCIe controller driver: - Revert tegra124 raw_violation_fixup (Nicolas Chauvet) - Remove PLL power supplies (Thierry Reding) Qualcomm PCIe controller driver: - Change duplicate PCI reset to phy reset (Abhishek Sahu) - Add missing ipq806x clocks in PCIe driver (Ansuel Smith) - Add missing reset for ipq806x (Ansuel Smith) - Add ext reset (Ansuel Smith) - Use bulk clk API and assert on error (Ansuel Smith) - Add support for tx term offset for rev 2.1.0 (Ansuel Smith) - Define some PARF params needed for ipq8064 SoC (Ansuel Smith) - Add ipq8064 rev2 variant (Ansuel Smith) - Support PCI speed set for ipq806x (Sham Muthayyan) Renesas R-Car PCIe controller driver: - Use devm_pci_alloc_host_bridge() (Rob Herring) - Use struct pci_host_bridge.windows list directly (Rob Herring) - Convert rcar-gen2 to use modern host bridge probe functions (Rob Herring) TI J721E PCIe driver: - Add TI J721E PCIe host and endpoint driver (Kishon Vijay Abraham I) Xilinx Versal CPM PCIe controller driver: - Add Versal CPM Root Port driver and YAML schema (Bharat Kumar Gogada) MicroSemi Switchtec management driver: - Add missing __iomem and __user tags to fix sparse warnings (Logan Gunthorpe) Miscellaneous: - Replace http:// links with https:// (Alexander A. Klimov) - Replace lkml.org, spinics, gmane with lore.kernel.org (Bjorn Helgaas) - Remove unused pci_lost_interrupt() (Heiner Kallweit) - Move PCI_VENDOR_ID_REDHAT definition to pci_ids.h (Huacai Chen) - Fix kerneldoc warnings (Krzysztof Kozlowski)" * tag 'pci-v5.9-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (113 commits) PCI: Fix kerneldoc warnings PCI: xilinx-cpm: Add Versal CPM Root Port driver PCI: xilinx-cpm: Add YAML schemas for Versal CPM Root Port PCI: Set bridge map_irq and swizzle_irq to default functions PCI: Move DT resource setup into devm_pci_alloc_host_bridge() PCI: rcar-gen2: Convert to use modern host bridge probe functions PCI: Remove dev_err() when handing an error from platform_get_irq() MAINTAINERS: Add Kishon Vijay Abraham I for TI J721E SoC PCIe misc: pci_endpoint_test: Add J721E in pci_device_id table PCI: j721e: Add TI J721E PCIe driver PCI: switchtec: Add missing __iomem tag to fix sparse warnings PCI: switchtec: Add missing __iomem and __user tags to fix sparse warnings PCI: rpadlpar: Make functions static PCI/P2PDMA: Allow P2PDMA on AMD Zen and newer CPUs PCI: Release IVRS table in AMD ACS quirk PCI: Announce device after early fixups PCI: Mark AMD Navi10 GPU rev 0x00 ATS as broken PCI: Remove unused pci_lost_interrupt() dt-bindings: PCI: Add EP mode dt-bindings for TI's J721E SoC dt-bindings: PCI: Add host mode dt-bindings for TI's J721E SoC ...
2020-08-07Merge tag 'trace-v5.9' of ↵Gravatar Linus Torvalds 1-0/+11
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing updates from Steven Rostedt: - The biggest news in that the tracing ring buffer can now time events that interrupted other ring buffer events. Before this change, if an interrupt came in while recording another event, and that interrupt also had an event, those events would all have the same time stamp as the event it interrupted. Now, with the new design, those events will have a unique time stamp and rightfully display the time for those events that were recorded while interrupting another event. - Bootconfig how has an "override" operator that lets the users have a default config, but then add options to override the default. - A fix was made to properly filter function graph tracing to the ftrace PIDs. This came in at the end of the -rc cycle, and needs to be backported. - Several clean ups, performance updates, and minor fixes as well. * tag 'trace-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (39 commits) tracing: Add trace_array_init_printk() to initialize instance trace_printk() buffers kprobes: Fix compiler warning for !CONFIG_KPROBES_ON_FTRACE tracing: Use trace_sched_process_free() instead of exit() for pid tracing bootconfig: Fix to find the initargs correctly Documentation: bootconfig: Add bootconfig override operator tools/bootconfig: Add testcases for value override operator lib/bootconfig: Add override operator support kprobes: Remove show_registers() function prototype tracing/uprobe: Remove dead code in trace_uprobe_register() kprobes: Fix NULL pointer dereference at kprobe_ftrace_handler ftrace: Fix ftrace_trace_task return value tracepoint: Use __used attribute definitions from compiler_attributes.h tracepoint: Mark __tracepoint_string's __used trace : Have tracing buffer info use kvzalloc instead of kzalloc tracing: Remove outdated comment in stack handling ftrace: Do not let direct or IPMODIFY ftrace_ops be added to module and set trampolines ftrace: Setup correct FTRACE_FL_REGS flags for module tracing/hwlat: Honor the tracing_cpumask tracing/hwlat: Drop the duplicate assignment in start_kthread() tracing: Save one trace_event->type by using __TRACE_LAST_TYPE ...
2020-08-07Merge tag 'clk-for-linus' of ↵Gravatar Linus Torvalds 22-283/+473
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "It looks like a smaller batch of clk updates this time around. In the core framework we just have some minor tweaks and a debugfs feature, so not much to see there. The driver updates are fairly well split between AT91 and Qualcomm clk support. Adding those two drivers together equals about 50% of the diffstat. Otherwise, the big amount of work this time was on supporting Broadcom's Raspberry Pi firmware clks. Highlights: Core: - Document clk_hw_round_rate() so it gets some more use - Remove unused __clk_get_flags() - Add a prepare/enable debugfs feature similar to rate setting New Drivers: - Add support for SAMA7G5 SoC clks - Enable CPU clks on Qualcomm IPQ6018 SoCs - Enable CPU clks on Qualcomm MSM8996 SoCs - GPU clk support for Qualcomm SM8150 and SM8250 SoCs - Audio clks on Qualcomm SC7180 SoCs - Microchip Sparx5 DPLL clk - Add support for the new Renesas RZ/G2H (R8A774E1) SoC Updates: - Make defines for bcm63xx-gate clks to use in DT - Support BCM2711 SoC firmware clks - Add HDMI clks for BCM2711 SoCs - Add RTC related clks on Ingenic SoCs - Support USB PHY clks on Ingenic SoCs - Support gate clks on BCM6318 SoCs - RMU and DMAC/GPIO clock support for Actions Semi S500 SoCs - Use poll_timeout functions in Rockchip clk driver - Support Rockchip rk3288w SoC variant - Mark mac_lbtest critical on Rockchip rk3188 - Add CAAM clock support for i.MX vf610 driver - Add MU root clock support for i.MX imx8mp driver - Amlogic g12: add neural network accelerator clock sources - Amlogic meson8: remove critical flag for main PLL divider - Amlogic meson8: add video decoder clock gates - Convert one more Renesas DT binding to json-schema - Enhance critical clock handling on Renesas platforms to only consider clocks that were enabled at boot time" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (79 commits) clk: qcom: gcc: Make disp gpll0 branch aon for sc7180/sdm845 ipq806x: gcc: add support for child probe clk: qcom: msm8996: Make symbol 'cpu_msm8996_clks' static clk: qcom: ipq8074: Add correct index for PCIe clocks clk: <linux/clk-provider.h>: drop a duplicated word clk: renesas: cpg-mssr: Add r8a774e1 support dt-bindings: clock: renesas,cpg-mssr: Document r8a774e1 clk: Drop duplicate selection in Kconfig clk: qcom: smd: Add support for MSM8992/4 rpm clocks clk: qcom: ipq8074: Add missing clocks for pcie dt-bindings: clock: qcom: ipq8074: Add missing bindings for PCIe Replace HTTP links with HTTPS ones: Common CLK framework clk: qcom: Add CPU clock driver for msm8996 dt-bindings: clk: qcom: Add bindings for CPU clock for msm8996 soc: qcom: Separate kryo l2 accessors from PMU driver clk: meson: meson8b: add the vclk2_en gate clock clk: meson: meson8b: add the vclk_en gate clock clk: qcom: Fix return value check in apss_ipq6018_probe() clk: bcm: dvp: Add missing module informations clk: meson: meson8b: Drop CLK_IS_CRITICAL from fclk_div2 ...
2020-08-07Merge tag 'pm-5.9-rc1-2' of ↵Gravatar Linus Torvalds 1-0/+69
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more power management updates from Rafael Wysocki: "These are mostly ARM cpufreq driver updates plus a cpufreq core cleanup, an ARM-wide change to make schedutil the default scaling governor, an intel_pstate driver fix and some runtime PM changes regarding kerneldoc comments. Specifics: - Add adaptive voltage scaling (AVS) support to the brcmstb cpufreq driver and clean it up (Florian Fainelli, Markus Mayer). - Add a new Tegra cpufreq driver and clean up the existing one (Jon Hunter, Sumit Gupta). - Add bandwidth level support to the Qcom cpufreq driver along with OPP changes (Sibi Sankar). - Clean up the sti, cpufreq-dt, ap806, CPPC cpufreq drivers (Viresh Kumar, Lee Jones, Ivan Kokshaysky, Sven Auhagen, Xin Hao). - Make schedutil the default governor for ARM (Valentin Schneider). - Fix dependency issues for the imx cpufreq driver (Walter Lozano). - Clean up cached_resolved_idx handlihng in the cpufreq core (Viresh Kumar). - Fix the intel_pstate driver to use the correct maximum frequency value when MSR_TURBO_RATIO_LIMIT is 0 (Srinivas Pandruvada). - Provide kenrneldoc comments for multiple runtime PM helpers and improve the pm_runtime_get_if_active() kerneldoc (Rafael Wysocki)" * tag 'pm-5.9-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (22 commits) cpufreq: intel_pstate: Fix cpuinfo_max_freq when MSR_TURBO_RATIO_LIMIT is 0 PM: runtime: Improve kerneldoc of pm_runtime_get_if_active() PM: runtime: Add kerneldoc comments to multiple helpers cpufreq: make schedutil the default for arm and arm64 cpufreq: cached_resolved_idx can not be negative cpufreq: Add Tegra194 cpufreq driver dt-bindings: arm: Add NVIDIA Tegra194 CPU Complex binding cpufreq: imx: Select NVMEM_IMX_OCOTP cpufreq: sti-cpufreq: Fix some formatting and misspelling issues cpufreq: tegra186: Simplify probe return path cpufreq: CPPC: Reuse caps variable in few routines cpufreq: ap806: fix cpufreq driver needs ap cpu clk cpufreq: cppc: Reorder code and remove apply_hisi_workaround variable cpufreq: dt: fix oops on armada37xx cpufreq: brcmstb-avs-cpufreq: send S2_ENTER / S2_EXIT commands to AVS cpufreq: brcmstb-avs-cpufreq: Support polling AVS firmware cpufreq: brcmstb-avs-cpufreq: more flexible interface for __issue_avs_command() cpufreq: qcom: Disable fast switch when scaling DDR/L3 cpufreq: qcom: Update the bandwidth levels on frequency change OPP: Add and export helper to set bandwidth ...
2020-08-07Merge tag 'for-5.9/dm-changes' of ↵Gravatar Linus Torvalds 2-7/+29
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper updates from Mike Snitzer: - DM multipath locking fixes around m->flags tests and improvements to bio-based code so that it follows patterns established by request-based code. - Request-based DM core improvement to eliminate unnecessary call to blk_mq_queue_stopped(). - Add "panic_on_corruption" error handling mode to DM verity target. - DM bufio fix to to perform buffer cleanup from a workqueue rather than wait for IO in reclaim context from shrinker. - DM crypt improvement to optionally avoid async processing via workqueues for reads and/or writes -- via "no_read_workqueue" and "no_write_workqueue" features. This more direct IO processing improves latency and throughput with faster storage. Avoiding workqueue IO submission for writes (DM_CRYPT_NO_WRITE_WORKQUEUE) is a requirement for adding zoned block device support to DM crypt. - Add zoned block device support to DM crypt. Makes use of DM_CRYPT_NO_WRITE_WORKQUEUE and a new optional feature (DM_CRYPT_WRITE_INLINE) that allows write completion to wait for encryption to complete. This allows write ordering to be preserved, which is needed for zoned block devices. - Fix DM ebs target's check for REQ_OP_FLUSH. - Fix DM core's report zones support to not report more zones than were requested. - A few small compiler warning fixes. - DM dust improvements to return output directly to the user rather than require they scrape the system log for output. * tag 'for-5.9/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm: don't call report zones for more than the user requested dm ebs: Fix incorrect checking for REQ_OP_FLUSH dm init: Set file local variable static dm ioctl: Fix compilation warning dm raid: Remove empty if statement dm verity: Fix compilation warning dm crypt: Enable zoned block device support dm crypt: add flags to optionally bypass kcryptd workqueues dm bufio: do buffer cleanup from a workqueue dm rq: don't call blk_mq_queue_stopped() in dm_stop_queue() dm dust: add interface to list all badblocks dm dust: report some message results directly back to user dm verity: add "panic_on_corruption" error handling mode dm mpath: use double checked locking in fast path dm mpath: rename current_pgpath to pgpath in multipath_prepare_ioctl dm mpath: rework __map_bio() dm mpath: factor out multipath_queue_bio dm mpath: push locking down to must_push_back_rq() dm mpath: take m->lock spinlock when testing QUEUE_IF_NO_PATH dm mpath: changes from initial m->flags locking audit
2020-08-07Merge tag 'media/v5.9-1' of ↵Gravatar Linus Torvalds 37-186/+2125
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - Legacy soc_camera driver was removed from staging - New I2C sensor related drivers: dw9768, ch7322, max9271, rdacm20 - TI vpe driver code was re-organized and had new features added - Added Xilinx MIPI CSI-2 Rx Subsystem driver - Added support for Infrared Toy and IR Droid devices - Lots of random driver fixes, new features and cleanups * tag 'media/v5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (318 commits) media: camss: fix memory leaks on error handling paths in probe media: davinci: vpif_capture: fix potential double free media: radio: remove redundant assignment to variable retval media: allegro: fix potential null dereference on header media: mtk-mdp: Fix a refcounting bug on error in init media: allegro: fix an error pointer vs NULL check media: meye: fix missing pm_mchip_mode field media: cafe-driver: use generic power management media: saa7164: use generic power management media: v4l2-dev/ioctl: Fix document for VIDIOC_QUERYCAP media: v4l2: Correct kernel-doc inconsistency media: v4l2: Correct kernel-doc inconsistency media: dvbdev.h: keep * together with the type media: v4l2-subdev.h: keep * together with the type media: videobuf2: Print videobuf2 buffer state by name media: colorspaces-details.rst: fix V4L2_COLORSPACE_JPEG description media: tw68: use generic power management media: meye: use generic power management media: cx88: use generic power management media: cx25821: use generic power management ...
2020-08-07Merge tag 'mailbox-v5.9' of ↵Gravatar Linus Torvalds 2-3/+7
git://git.linaro.org/landing-teams/working/fujitsu/integration Pull mailbox updates from Jassi Brar: "mediatek: - add support for mt6779 gce - shutdown cleanup and address shift support qcom: - add msm8994 apcs and sdm660 hmss compatibility imx: - mark PM funcs __maybe pcc: - put acpi table before bailout misc: - replace http with https links" * tag 'mailbox-v5.9' of git://git.linaro.org/landing-teams/working/fujitsu/integration: mailbox: mediatek: cmdq: clear task in channel before shutdown mailbox: cmdq: support mt6779 gce platform definition mailbox: cmdq: variablize address shift in platform dt-binding: gce: add gce header file for mt6779 mailbox: qcom: Add msm8994 apcs compatible mailbox: qcom: Add sdm660 hmss compatible mailbox: imx: Mark PM functions as __maybe_unused mailbox: pcc: Put the PCCT table for error path mailbox: Replace HTTP links with HTTPS ones