| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt
i.MX arm64 device tree for 6.9:
- New board support: Apalis eval v1.2 carrier board, Variscite
VAR-SOM-MX93, phyBOARD-Segin-i.MX93.
- A series from Adam Ford to enable bluetooth, configure multiple queues
on eqos, remove unnecessary clock configuration for i.MX8 Beacon boards.
- Several changesets from Alexander Stein to add i.MX8DXP support, enable
audio and GPU for i.MX8QXP, re-parent MEDIA_MIPI_PHY1_REF clock for
i.MX8MP, and improve MBA8xx board description.
- A few dt-schema fixes from Fabio Estevam for i.MX8MM and i.MX93 devices.
- A bunch of changes from Frank Li to improve i.MX8QM and i.MX8DXL
support, correcting edma3 power-domains and interrupt numbers, adding
I2C, FlexCAN and SMMU devices, etc.
- A series from Frieder Schrempf to improve imx8mm-kontron board
descriptions, disabling pulls, fixing up RTC device, adding EEPROM,
and refactoring OSM-S module, etc.
- A set of Data Modul i.MX8M Plus eDM SBC improvements from Marek Vasut.
- A series from Shengjiu Wang to add PDM micphone and SPDIF sound card
support for imx8mm-evk board.
- A series of imx8mm-venice boards improvement from Tim Harvey to add
TPM device, fix USB OTG VBUS etc.
- Other small and random improvements on various boards.
* tag 'imx-dt64-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (77 commits)
arm64: dts: imx8mm-kontron-bl-osm-s: Fix Ethernet PHY compatible
arm64: dts: imx8-apalis-v1.1: Remove reset-names from ethernet-phy
arm64: dts: imx8mp-evk: Fix hdmi@3d node
arm64: dts: imx93-var-som: Remove phy-supply from eqos
arm64: dts: imx8mp-phyboard-pollux: Disable pull-up for CD GPIO
arm64: dts: imx8mp-phyboard-pollux: Reduce drive strength for eqos tx lines
arm64: dts: imx8mp-phyboard-pollux: Set debug uart muxing to 0x140
arm64: dts: imx8mp-phyboard-pollux: Add and update rtc devicetree node
arm64: dts: imx8mm-evk: Add spdif sound card support
arm64: dts: mba8xx: Add missing #interrupt-cells
arm64: dts: imx8mp: Set SPI NOR to max 40 MHz on Data Modul i.MX8M Plus eDM SBC
arm64: dts: imx8mn: tqma8mqnl-mba8mx: Add USB DR overlay
arm64: dts: imx8mq: tqma8mq-mba8mx: Add missing USB vbus supply
arm64: dts: freescale: imx8mm/imx8mq: mba8mx: Use PCIe clock generator
arm64: dts: imx8mn-beacon: Remove unnecessary clock configuration
arm64: dts: imx8mn: Slow default video_pll clock rate
arm64: dts: imx8mp-beacon: Configure multiple queues on eqos
arm64: dts: imx8mp-beacon: Enable Bluetooth
arm64: dts: freescale: minor whitespace cleanup
arm64: dts: lx2160a: Fix DTS for full PL011 UART
...
Link: https://lore.kernel.org/r/20240226034147.233993-4-shawnguo2@yeah.net
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt
i.MX ARM device tree for 6.9:
- New board support: Sielaff i.MX6 Solo, Apalis Evaluation Board v1.2.
- A bunch of i.MX7 TQMA7/MBA7 updates from Alexander Stein that add
various devices, improve hardware descriptions and fix dt-schema
warnings, etc.
- Correct touchscreen rotation for imx6sl-tolino-shine2hd board.
- An imx53-qsb update from Dmitry Baryshkov to add HDMI expander support.
- A couple of i.MX1 and i.MX28 device node name fixes from Fabio Estevam.
- Enable usb3-lpm-capable for LS1021A usb3 node.
- A couple of imx6dl-yapp4 board improvements from Michal Vokáč.
- A series from Sebastian Reichel to improve imx6ull descriptions.
* tag 'imx-dt-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (43 commits)
ARM: dts: nxp: imx: fix weim node name
ARM: dts: nxp: imx6ul: fix touchscreen node name
ARM: dts: nxp: imx6ul: xnur-gpio -> xnur-gpios
ARM: dts: imx6ul: Remove fsl,anatop from usbotg1
ARM: dts: imx6ull: fix pinctrl node name
ARM: dts: imx1-apf9328: Fix Ethernet node name
ARM: dts: imx28-evk: Use 'eeprom' as the node name
ARM: dts: ls1021a: Enable usb3-lpm-capable for usb3 node
ARM: dts: imx6dl-yapp4: Move the internal switch PHYs under the switch node
ARM: dts: imx6dl-yapp4: Fix typo in the QCA switch register address
ARM: dts: imx6ul: Set macaddress location in ocotp
ARM: dts: imx53-qsb: add support for the HDMI expander
ARM: dts: imx6ull-dhcom: Remove /omit-if-no-ref/ from node usdhc1-pwrseq
ARM: dts: imx: Add support for Apalis Evaluation Board v1.2
ARM: dts: imx6: skov: add aliases for all ethernet nodes
ARM: dts: imx6qdl-hummingboard: Add rtc0 and rtc1 aliases to fix hctosys
ARM: dts: imx6dl: Add support for Sielaff i.MX6 Solo board
ARM: dts: imx6ul: Add missing #thermal-sensor-cells to tempmon
ARM: dts: imx6sl-tolino-shine2hd: fix touchscreen rotation
ARM: dts: imx6ull-dhcor: Remove 900MHz operating point
...
Link: https://lore.kernel.org/r/20240226034147.233993-3-shawnguo2@yeah.net
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
Qualcomm ARM64 DeviceTree updates for v6.9
Four variants of Samsung Galaxy Core Prime and Grand Prime, built on
MSM8916, and the Hardware Development Kit (HDK) for SM8550, are
introduced.
On X Elite audio and compute remoteprocs, IPCC, PCIe, AOSS QMP, SMP2P,
TCSR, USB, display, audio, and soundwire support is introduced, and
enabled across the CRD and QCP devices.
For SM8650 PCIe controllers are moved to GIC-ITS and msi-map-mask is
defined. Missing qlink-logging reserved-memory region is added for the
modem remoteproc. FastRPC compute contexts are marked dma-coherent.
Audio, USB Type-C and PM8010 support is introduced across MTP and QRD
devices.
GPU cooling devices are hooked up across MSM8916, MSM8939, SC8180X,
SDM630, SDM845, SM6115, SM8150, SM8250, SM8350, and SM8550.
UFS PHY clocks are corrected across MSM8996, MSM8998, SC8180X, SC8280XP,
SDM845, SM6115, SM6125, SM8150, SM8250, SM8350, SM8550, and SM8650.
PCI MSI interrupts are wired up across SM8150, SM8250, SM8350, SM8450,
SM8550, SM8650, SC7280, and SC8180X
On IPQ6018 QUP5 I2C, tsens sand thermal zones are defined. The Inline
Crypto Engine (ICE) is enabled for IPQ9574.
On MSM8953 the GPU and its IOMMU is introduced, the reset for the
display subsystem is also wired up.
VLS CLAMP registers are specified for USB3 PHYs on MSM8998, QCM2290, and
SM6115.
USB Type-C port management is enabled on QRB4210 RB2.
On the SA8295P ADP the MAX20411 regulator powering the GPU rails is
introduced and the GPU is enabled. The first PCI instance on SA8540P
Ride is disabled for now, as a fix for the interrupt storm produced here
has not been presented.
On SA8775P the firmware memory map has changed and is updated. Safety
IRQ is added to the Ethernet controller.
On SC7180 UFS support is introduced and the cros-ec-spi is marked as
wakeup source.
For SC7280 capacity and DPC properties are added, cryptobam definition
is improved to work in more firmware environments, more Chrome-specific
properties are moved out from main dtsi, and cros-ec-spi is maked as a
wakeup source. Slimbus definition is added to the platform.
A missing reserved-memory range is added to Fairphone FP5, PMIC GLINK
and Venus are enabled. LEDs are introduced and voltage settings
corrected on the QCM6490 IDP, and RB3gen2 sees the same voltage changes
and GCC protected clocks are introduced to make the board boot properly.
RPMh sleep stats and a variety of cleanups and fixes are introduced for
SC8180X.
On SC8280XP the additional tsens instances are introduced. Camera
Subsystem and Camera Control Interface (CCI) are added. PMIC die-temp
vadc channels are introduced on the CRD, to allow ADC channels to be
tied to the shared PMIC temp-alarms, to actually report temperature.
On SDM630 USB QMP PHY support is introduced and enabled on the Inforce
IFC6560 board. On the various Sony Xperia XA2 variants WLED is enabled
and configured.
On SM6350 display subsystem interconnects and tsens-based thermal zones
are added. On SM7125 UFS support is added.
On Fairphone FP4, on SM7225, display and GPU are enabled, and firmware
paths are corrected.
SM8150 PCIe controller definitions are corrected.
As with SM8650, the SM8550 the fastrpc compute contexts are marked
dm-coherent, and PCIe controllers are moved to use GIC-ITS. The UFS
controller frequency definition is moved to the generic opp-table.
Touchscreen is enabled on the QRD device.
As usual, a variety of smaller cleanups and corrections to match
DeviceTree bindings and style guidelines are introduced across the
various files.
* tag 'qcom-arm64-for-6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (176 commits)
arm64: dts: qcom: sm6115: fix USB PHY configuration
arm64: dts: sm8650: Add msi-map-mask for PCIe nodes
arm64: dts: qcom: replace underscores in node names
dt-bindings: arm: qcom: Add Samsung Galaxy Tab 4 10.1 LTE
arm64: dts: qcom: pm4125: define USB-C related blocks
arm64: dts: qcom: sa8540p-ride: disable pcie2a node
arm64: dts: qcom: sc7280: add slimbus DT node
arm64: dts: qcom: sc7280: Add capacity and DPC properties
arm64: dts: qcom: pmi632: Add PBS client and use in LPG node
arm64: dts: qcom: sm8550: Use GIC-ITS for PCIe0 and PCIe1
arm64: dts: qcom: sm8150: correct PCIe wake-gpios
arm64: dts: qcom: sdm845-db845c: correct PCIe wake-gpios
arm64: dts: qcom: sm7225-fairphone-fp4: Enable display and GPU
arm64: dts: qcom: sm6350: Remove "disabled" state of GMU
arm64: dts: qcom: msm8916-samsung-fortuna/rossa: Add fuel gauge
arm64: dts: qcom: sm6350: Add interconnect for MDSS
arm64: dts: qcom: msm8916-samsung-fortuna/rossa: Add initial device trees
arm64: dts: qcom: sm8550: Switch UFS from opp-table-hz to opp-v2
arm64: dts: qcom: sc8180x: describe all PCI MSI interrupts
arm64: dts: qcom: minor whitespace cleanup
...
Link: https://lore.kernel.org/r/20240225050146.484422-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/dt
- new H616 peripherals: SPDIF, DMA, THS
- H616 fanout pin configuration
- H6 SPDIF node update
- minor cleanups
- enabled regulator on FETA40i board
- added wifi to Transpeed 8K618-T board
- new boards: Jide Remix Mini PC, Sipeed Longan Module 3H and
Longan Pi 3H
* tag 'sunxi-dt-for-6.9-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: dts: allwinner: h616: Add thermal sensor and zones
ARM: dts: sun8i: Open FETA40i-C regulator aldo1
arm64: dts: allwinner: h616: Add Sipeed Longan SoM 3H and Pi 3H board support
dt-bindings: arm: sunxi: Add Sipeed Longan Module 3H and Longan Pi 3H
arm64: dts: allwinner: h616: minor whitespace cleanup
arm64: dts: allwinner: use capital "OR" for multiple licenses in SPDX
arm64: dts: allwinner: Transpeed 8K618-T: add WiFi nodes
arm64: dts: allwinner: h616: Add 32K fanout pin
arm64: dts: allwinner: Add Jide Remix Mini PC support
dt-bindings: arm: sunxi: document Remix Mini PC name
dt-bindings: vendor-prefixes: add Jide
arm64: dts: allwinner: h616: Add SPDIF device node
arm64: dts: allwinner: h616: Add DMA controller and DMA channels
arm64: dts: allwinner: h6: Add RX DMA channel for SPDIF
dt-bindings: sram: narrow regex for unit address to hex numbers
arm64: dts: allwinner: h616: Add Orange Pi Zero 2W to Makefile
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt
ARM: tegra: Device tree changes for v6.9-rc1
Add support for the LG Optimus 4X HD and LG Optimus VU devices and clean
up some minor issues.
* tag 'tegra-for-6.9-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra: Add device-tree for LG Optimus 4X HD (P880)
ARM: tegra: Add device-tree for LG Optimus Vu (P895)
ARM: tegra: nexus7: Add missing clock binding into sound node
ARM: tegra: Enable cros-ec-spi as wake source
Link: https://lore.kernel.org/r/20240223174849.1509465-4-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
Renesas DTS updates for v6.9 (take two)
- Add pin control, I2C, GPIO, CA76 cluster, Ethernet, SD/MMC, DMA, and
HyperFLASH/QSPI (RPC) support for the R-Car V4M SoC,
- Add I2C EEPROM, Ethernet, eMMC, and QSPI FLASH support for the Gray
Hawk Single development board,
- Fix PCIe power on ULCB development boards equipped with the
Shimafuji Kingfisher extension,
- Add PSCI support for the RZ/G3S SoC,
- Add camera support for the RZ/G2UL SMARC EVK development board,
- Add display support for the RZ/G2L{,C} and RZ/V2L SoCs and SMARC EVK
development boards,
- Miscellaneous fixes and improvements,
* tag 'renesas-dts-for-v6.9-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: (31 commits)
arm64: dts: renesas: rzg2l-smarc: Enable DU and link with DSI
arm64: dts: renesas: r9a07g054: Add DU node
arm64: dts: renesas: r9a07g044: Add DU node
arm64: dts: renesas: gray-hawk-single: Add QSPI FLASH support
arm64: dts: renesas: r8a779h0: Add RPC node
arm64: dts: renesas: r8a779h0: Add DMA support
arm64: dts: renesas: gray-hawk-single: Add eMMC support
arm64: dts: renesas: r8a779h0: Add SD/MMC node
ARM: dts: renesas: r8a7778: Add missing reg-names to sound node
arm64: dts: renesas: rzg2ul-smarc: Enable CRU, CSI support
arm64: dts: renesas: gray-hawk-single: Add Ethernet support
arm64: dts: renesas: r8a779h0: Add Ethernet-AVB support
arm64: dts: renesas: r8a779g0: Correct avb[01] reg sizes
arm64: dts: renesas: r8a779a0: Correct avb[01] reg sizes
arm64: dts: renesas: r9a08g045: Add PSCI support
arm64: dts: renesas: rzg3s-smarc-som: Guard Ethernet IRQ GPIO hogs
arm64: dts: renesas: r9a08g045: Add missing interrupts to IRQC node
arm64: dts: renesas: rzg2l: Add missing interrupts to IRQC nodes
arm64: dts: renesas: r8a779h0: Add CA76 operating points
arm64: dts: renesas: r8a779h0: Add CPU core clocks
...
Link: https://lore.kernel.org/r/cover.1708687134.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt
Display output for rk3128 and some adaptions to binding clarifications
for hdmi nodes on some older socs.
* tag 'v6.9-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: rockchip: fix rk322x hdmi ports node
ARM: dts: rockchip: fix rk3288 hdmi ports node
ARM: dts: rockchip: Enable HDMI output for XPI-3128
ARM: dts: rockchip: Add HDMI node for RK3128
ARM: dts: rockchip: Add display subsystem for RK3128
Link: https://lore.kernel.org/r/37970455.XM6RcZxFsP@diego
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into soc/dt
DTS fixes for the ARM Versatile boards:
- Use the "mtd-rom" compatible for the Realview ROM
- Fix up two VGA connector cells and labels
- Fix up the Cortex spelling
* tag 'versatile-dts-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator:
dt-bindings: arm: realview: Spelling s/ARM 11/Arm11/, s/Cortex A-/Cortex-A/
ARM: dts: integrator: Fix up VGA connector
ARM: dts: versatile: Fix up VGA connector
ARM: dts: arm: realview: Fix development chip ROM compatible value
Link: https://lore.kernel.org/r/CACRpkdaL6j6OdixHFHoMms4e=tXEw_6ynBMFb6m8=7KkVgEedA@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into soc/dt
Gemini DTS changes for the v6.9 kernel:
- Fix the node names of the DSA switch in DIR-685.
- Fix the node names of the Vitesse DSA switches.
- Fix up the Wiligear compatible strings
- Use KEY_RESTART where applicable.
* tag 'gemini-dts-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator:
ARM: dts: gemini: Fix switch node names on Vitesse switches
ARM: dts: gemini: Map reset keys to KEY_RESTART
ARM: dts: gemini: Fix wiligear compatible strings
ARM: dts: gemini: Fix switch node names in the DIR-685
Link: https://lore.kernel.org/r/CACRpkdYQv9cyCZyjgQB4FTrxek9Hfu4EZ3syfHqHF7P6gzddvA@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt into soc/dt
Minor improvements in ARM DTS for v6.9
1. Marvell MMP2: Very old issue, for which I sent patch back in 2014.
Patch was never picked up and now another try to fix the same
happened, so here it goes: use proper compatible MAX8925.
2. Marvell Dove: add proper unit-addresses.
3. TI DA850: add MMC interrupts.
4. STI: minor white-space fixes.
* tag 'dt-cleanup-6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt:
ARM: dts: sti: minor whitespace cleanup around '='
ARM: dts: da850: add MMD SDIO interrupts
ARM: dts: marvell: dove-cubox: fix si5351 node names
arm: dts: marvell: Fix maxium->maxim typo in brownstone dts
Link: https://lore.kernel.org/r/20240218182656.32103-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/dt
Samsung DTS ARM changes for v6.9
1. Disable thermal polling by Linux in Eynos5422 Odroid XU3 boards,
because drivers implement now proper dynamic trip points management.
2. Mark crosc-ec-spi in Peach Pi and Peach Pit as wake-up source, to
reflect the hardware capabilities.
3. Samsung P4 Note (Exynos4412): add accelerometer.
4. Samsung Galaxy Tab (Exynos5420):
- Reduce available RAM to avoid conflict with TrustZone.
- Add WiFi on MMC.
* tag 'samsung-dt-6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: samsung: exynos5420-galaxy-tab-common: add wifi node
ARM: dts: samsung: exynos5420-galaxy-tab: decrease available memory
ARM: dts: samsung: exynos4412-p4note: add accelerometer and gyro to p4note
ARM: dts: samsung: exynos5800-peach: Enable cros-ec-spi as wake source
ARM: dts: samsung: exynos5420-peach: Enable cros-ec-spi as wake source
ARM: dts: samsung: exynos5422-odroidxu3: disable thermal polling
Link: https://lore.kernel.org/r/20240218182141.31213-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
Renesas DTS updates for v6.9
- Add GPIO keys and watchdog support for the RZ/G3S SMARC development
board,
- Add GNSS support for Renesas ULCB development boards equipped with
the Shimafuji Kingfisher extension,
- Add support for the standalone White Hawk CPU board,
- Add support for the R-Car V4H ES2.0 (R8A779G2) SoC and the White
Hawk Single development board,
- Add initial support for the R-Car V4M (R8A779H0) SoC and the Gray
Hawk Single development board,
- Add camera support for the RZ/G2UL SoC,
- Miscellaneous fixes and improvements.
* tag 'renesas-dts-for-v6.9-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: (29 commits)
arm64: dts: renesas: gray-hawk-single: Enable watchdog timer
arm64: dts: renesas: r8a779h0: Add RWDT node
arm64: dts: renesas: Improve TMU interrupt descriptions
ARM: dts: renesas: Improve TMU interrupt descriptions
arm64: dts: renesas: r9a07g043u: Add CSI and CRU nodes
arm64: dts: renesas: Add Gray Hawk Single board support
arm64: dts: renesas: Add Renesas R8A779H0 SoC support
arm64: dts: renesas: rzg3s-smarc-som: Enable the watchdog interface
arm64: dts: renesas: r9a08g045: Add watchdog node
arm64: dts: renesas: r8a779g0: Add missing SCIF_CLK2
dt-bindings: clock: Add R8A779H0 V4M CPG Core Clock Definitions
dt-bindings: clock: renesas,cpg-mssr: Document R-Car V4M support
dt-bindings: power: Add r8a779h0 SYSC power domain definitions
dt-bindings: power: renesas,rcar-sysc: Document R-Car V4M support
arm64: dts: renesas: r8a779g2: Add White Hawk Single support
arm64: dts: renesas: Add Renesas R8A779G2 SoC support
arm64: dts: renesas: white-hawk: Factor out common parts
arm64: dts: renesas: white-hawk-cpu: Factor out common parts
arm64: dts: renesas: white-hawk: Add SoC name to top-level comment
arm64: dts: renesas: white-hawk: Drop SoC parts from sub boards
...
Link: https://lore.kernel.org/r/cover.1707487834.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
DT node names should be generic, so replace "weim" node name with
"memory-controller" in all i.MX SoC DT files.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The canonical node name for touchscreens is "touchscreen",
so update the i.MX6UL "tsc" node accordingly.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Replace all "xnur-gpio" with "xnur-gpios" in the i.MX6UL(L) Touchscreen
node, since the -gpio suffix is deprecated. All known implementations of
this binding can handle -gpio and -gpios since day 1, so this should be
fully backwards compatible.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
fsl,anatop should only be added to the usbphy nodes.
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
pinctrl node name must be either pinctrl or pinmux.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Per davicom,dm9000.yaml, the Ethernet node name should be 'ethernet'.
Change it to fix the following schema warning:
imx1-apf9328.dtb: eth@4,c00000: $nodename:0: 'eth@4,c00000' does not match '^ethernet(@.*)?$'
from schema $id: http://devicetree.org/schemas/net/davicom,dm9000.yaml#
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Per at24.yaml, the node name should be 'eeprom'.
Change it accordingly to fix the following schema warning:
imx28-evk.dtb: at24@51: $nodename:0: 'at24@51' does not match '^eeprom@[0-9a-f]{1,2}$'
from schema $id: http://devicetree.org/schemas/eeprom/at24.yaml#
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Enable USB3 HW LPM feature.
Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
We identified that the PHYs actually do not work since commit 7da7b84fee58
("ARM: dts: imx6dl-yapp4: Move phy reset into switch node") as
a coincidence of several circumstances.
The reset signal is kept asserted by a pull-down resistor on the board
unless it is deasserted by GPIO from the SoC. This is to keep the switch
dead until it is configured properly by the kernel and user space.
Prior to the referenced commit the switch was reset by the FEC driver
and the reset GPIO was actively deasserted. The mdio-bus was scanned
and the attached switch and its PHYs were found and configured.
With the referenced commit the switch is reset by the qca8k driver.
Because of another bug in the qca8k driver, functionality of the reset
pin depends on its pre-kernel configuration. See commit c44fc98f0a8f
("net: dsa: qca8k: fix illegal usage of GPIO")
The problem did not appear until we removed support for the switch
and configuration of its reset pin from the bootloader.
To fix that, properly describe the internal mdio-bus configuration of
the qca8334 switch. The PHYs are internal to the switch and sit on its
internal mdio-bus.
Fixes: 7da7b84fee58 ("ARM: dts: imx6dl-yapp4: Move phy reset into switch node")
Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
This change does not have any functional effect. The switch works just
fine without this patch as it has full access to all the addresses
on the bus. This is simply a clean-up to set the node name address
and reg address to the same value.
Fixes: 15b43e497ffd ("ARM: dts: imx6dl-yapp4: Use correct pseudo PHY address for the switch")
Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
If a bootloader does not configure the MAC address, devices come up with
a random MAC at the moment.
ocotp provides registers for storing the mac-address.
Configure those for i.MX6UL and i.MX6ULL allows net/core to retrieve it from
there.
Signed-off-by: Manuel Traut <manuel.traut@mt.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The USB PHY in the Allwinner R40 SoC seems to rely on voltage on the
VCC-TVIN/OUT supply pins for proper operation, on top of its own supply
voltage on VCC-USB. Without a 3.3V voltage supplied to VCC-TV*, USB
operation becomes unstable and can result in disconnects.
The Forlinx FETA40i-C SoM connects both the VCC-TVOUT and VCC-TVIN pins
to the ALDO1 rail of the PMIC, so we need to enable that rail for USB
operation. Since there is no supply property in the DT bindings for
the USB core, we need to always enable the regulator.
This fixes unstable USB operation on boards using the Forlinx FETA40i-C
module.
Signed-off-by: Fuyao Kashizuku <fuyao@sjterm.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/ZYqRZev1g_mztff2@debian.cyg
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/fixes
Renesas fixes for v6.8
- Add missing #interrupt-cells to DA9063 nodes.
* tag 'renesas-fixes-for-v6.8-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
ARM: dts: renesas: rcar-gen2: Add missing #interrupt-cells to DA9063 nodes
Link: https://lore.kernel.org/r/cover.1708597150.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Add support for the MCIMXHDMICARD expansion card attached to the iMX53
QSB / QSRB platforms. This enables HDMI output on those devices.
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add device-tree for LG Optimus 4X HD P880, which is a NVIDIA
Tegra30-based smartphone, originally running Android.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Add device-tree for LG Optimus Vu P895, which is a NVIDIA
Tegra30-based smartphone, originally running Android.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
A recent rt5640 codec update requires mclk definition in the
device tree. Without mclk defined sound will not work.
Signed-off-by: Robert Eckelmann <longnoserob@gmail.com>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Sound Driver requires "reg-names" to get register info. Current driver
tries to get register info via "reg" instead of "reg-names" as backup
plan, but this support will be removed soon.
Use "reg-namess" for r8a7778 sound.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/87cyszpwmp.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
make dtbs_check W=2:
arch/arm/boot/dts/renesas/r8a7790-lager.dts:444.11-458.5: Warning (interrupt_provider): /i2c-mux4/pmic@58: Missing '#interrupt-cells' in interrupt provider
...
Fix this by adding the missing #interrupt-cells properties.
Reported-by: Rob Herring <robh@kernel.org>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/a351e503ea97fb1af68395843f513925ff1bdf26.1707922460.git.geert+renesas@glider.be
|
|
The bridge does not have any cells on the node level, just on the
ports.
The VGA connector is actually named "J30" on the board so give it that
name in the device tree.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
The bridge does not have any cells on the node level, just on the
ports.
The VGA connector is actually named "J1" on the board so give it that
name in the device tree.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
When the development chip ROM was added, the "direct-mapped" compatible
value was already obsolete. In addition, the device node lacked the
accompanying "probe-type" property, causing the old physmap_of_core
driver to fall back to trying all available probe types.
Unfortunately this fallback was lost when the DT and pdata cases were
merged.
Fix this by using the modern "mtd-rom" compatible value instead.
Fixes: 5c3f5edbe0a1dff3 ("ARM: realview: add flash devices to the PB1176 DTS")
Fixes: 642b1e8dbed7bbbf ("mtd: maps: Merge physmap_of.c into physmap-core.c")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
The formally correct node names have "ethernet-*" prefix on
switch, ports and port, fix it up.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240211-gemini-dts-v1-4-6c09adeb4c2e@linaro.org
|
|
This maps the misc "reset", "setup" and "facory reset" keys to the
only key a standard userspace is likely to understand: KEY_RESTART.
On OpenWrt this will simply restart the system under controlled
forms.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240211-gemini-dts-v1-3-6c09adeb4c2e@linaro.org
|
|
These board strings were deprecated in the bindings ages ago,
switch the boards over to the real names.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240211-gemini-dts-v1-2-6c09adeb4c2e@linaro.org
|
|
The formally correct node names have "ethernet-*" prefix on
switch, ports, port and phy, fix it up.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240211-gemini-dts-v1-1-6c09adeb4c2e@linaro.org
|
|
The dtc interrupt_map warning is off because its dependency,
interrupt_provider, is off by default. Fix all the warnings so it can be
enabled.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240213-arm-dt-cleanups-v1-4-f2dee1292525@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The dtc interrupt_provider warning is off by default. Fix all the warnings
so it can be enabled.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Reviewed-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com> #Broadcom
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20240213-arm-dt-cleanups-v1-2-f2dee1292525@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/fixes
Some fixes to make devicetrees conform to bindings better (pwm irqs), dt
styling fixes (unneeded jaguar status, whitespaces, Cool Pi regulator
naming) and functionality fixes (px30 spi chipselect number, allowing
rk3588-evb1 to turn off, pcie lane numbers on CoolPi, wrong gpio-names
on Indidroid Nova and some CoolPi sdmmc aliases to match what uboot uses).
* tag 'v6.8-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: Correct Indiedroid Nova GPIO Names
arm64: dts: rockchip: Drop interrupts property from rk3328 pwm-rockchip node
arm64: dts: rockchip: set num-cs property for spi on px30
arm64: dts: rockchip: minor rk3588 whitespace cleanup
arm64: dts: rockchip: drop unneeded status from rk3588-jaguar gpio-leds
ARM: dts: rockchip: Drop interrupts property from pwm-rockchip nodes
arm64: dts: rockchip: Fix the num-lanes of pcie3x4 on Cool Pi CM5 EVB
arm64: dts: rockchip: rename vcc5v0_usb30_host regulator for Cool Pi CM5 EVB
arm64: dts: rockchip: aliase sdmmc as mmc1 for Cool Pi CM5 EVB
arm64: dts: rockchip: aliase sdmmc as mmc1 for Cool Pi 4B
arm64: dts: rockchip: mark system power controller on rk3588-evb1
Link: https://lore.kernel.org/r/2450634.jE0xQCEvom@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The cros_ec driver currently assumes that cros-ec-spi compatible device
nodes are a wakeup-source even though the wakeup-source property is not
defined.
Some Chromebooks use a separate wake pin, while others overload the
interrupt for wake and IO. With the current assumption, spurious wakes
can occur on systems that use a separate wake pin. It is planned to
update the driver to no longer assume that the EC interrupt pin should
be enabled for wake.
Add the wakeup-source property to all cros-ec-spi compatible device
nodes to signify to the driver that they should still be a valid wakeup
source.
Signed-off-by: Mark Hasemeyer <markhas@chromium.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Fix rk322x hdmi ports node so that it matches the
rockchip,dw-hdmi.yaml binding.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/9b84adf0-9312-47fd-becc-cadd06941f70@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Fix rk3288 hdmi ports node so that it matches the
rockchip,dw-hdmi.yaml binding with some reordering
to align with the (new) documentation about
property ordering.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/cc3a9b4f-076d-4660-b464-615003b6a066@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
By using brcm/brcmfmac4354-sdio.bin from linux-firmware together with
nvram.txt from vendor firmware wifi works well on the chagall-wifi and
klimt-lte.
Signed-off-by: Henrik Grimler <henrik@grimler.se>
Link: https://lore.kernel.org/r/20240206-galaxy-tab-s-cleanup-v2-1-89025c6c66c5@grimler.se
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
The last 6 MiB are used by trustzone firmware, and cannot be used by
Linux. Currently we are saved by that the proprietary bootloader
(sboot) passes available memory to kernel through ATAG_MEM. Change
memory range in any case so that we do not have to rely on ATAG_MEM.
Signed-off-by: Henrik Grimler <henrik@grimler.se>
Link: https://lore.kernel.org/r/20240130-galaxy-tab-s-cleanup-v1-3-d4e17857241d@grimler.se
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
Add the input capture interrupt on Timer Unit instances that have it.
Add "interrupt-names" properties for clarity.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/389a18ee2cea96726462c28463cf212330f74ee3.1705325654.git.geert+renesas@glider.be
|
|
Remove /omit-if-no-ref/ from node usdhc1-pwrseq, because if the compile
flag -@ (include symbols) is used the node will always be there. In this
case, GPIO H is not released and therefore cannot be used. Therefore,
remove this node manually from the corresponding devicetree file and
don't rely on /omit-if-no-ref/.
Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add support for the new Apalis Evaluation Board v1.2. Because
only the imx6q-apalis-eval.dts was available, the imx6q-apalis-eval.dtsi
has been created which has common hardware configurations for v1.0, v1.1
and v1.2. Both imx6q-apalis-eval.dts and imx6q-apalis-eval-v1.2.dts
files include imx6q-apalis-eval.dtsi.
Versions 1.0 and 1.1 are compatible with each other and should
use imx6q-apalis-eval.dts file. Now for v1.2, the new device-tree file
should be used.
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Hiago De Franco <hiago.franco@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add aliases for all ethernet nodes including the switch. It makes it
easier to find this nodes by the boot loader.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
Arnd Bergmann
Sebastian Reichel
Fabio Estevam
Li Yang
Michal Vokáč
Manuel Traut
Fuyao Kashizuku
Dmitry Baryshkov
Svyatoslav Ryhel
Robert Eckelmann
Kuninori Morimoto
Geert Uytterhoeven
Linus Walleij
Rob Herring
Mark Hasemeyer
Johan Jonker
Henrik Grimler
Christoph Niedermaier
Hiago De Franco
Oleksij Rempel
