aboutsummaryrefslogtreecommitdiff
path: root/arch/mips/kvm
AgeCommit message (Collapse)AuthorFilesLines
2022-09-26KVM: remove KVM_REQ_UNHALTGravatar Paolo Bonzini 1-1/+0
KVM_REQ_UNHALT is now unnecessary because it is replaced by the return value of kvm_vcpu_block/kvm_vcpu_halt. Remove it. No functional change intended. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Acked-by: Marc Zyngier <maz@kernel.org> Message-Id: <20220921003201.1441511-13-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-09-26KVM: mips, x86: do not rely on KVM_REQ_UNHALTGravatar Paolo Bonzini 1-4/+3
KVM_REQ_UNHALT is a weird request that simply reports the value of kvm_arch_vcpu_runnable() on exit from kvm_vcpu_halt(). Only MIPS and x86 are looking at it, the others just clear it. Check the state of the vCPU directly so that the request is handled as a nop on all architectures. No functional change intended, except for corner cases where an event arrive immediately after a signal become pending or after another similar host-side event. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20220921003201.1441511-12-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-08-19KVM: Rename mmu_notifier_* to mmu_invalidate_*Gravatar Chao Peng 1-6/+6
The motivation of this renaming is to make these variables and related helper functions less mmu_notifier bound and can also be used for non mmu_notifier based page invalidation. mmu_invalidate_* was chosen to better describe the purpose of 'invalidating' a page that those variables are used for. - mmu_notifier_seq/range_start/range_end are renamed to mmu_invalidate_seq/range_start/range_end. - mmu_notifier_retry{_hva} helper functions are renamed to mmu_invalidate_retry{_hva}. - mmu_notifier_count is renamed to mmu_invalidate_in_progress to avoid confusion with mn_active_invalidate_count. - While here, also update kvm_inc/dec_notifier_count() to kvm_mmu_invalidate_begin/end() to match the change for mmu_notifier_count. No functional change intended. Signed-off-by: Chao Peng <chao.p.peng@linux.intel.com> Message-Id: <20220816125322.1110439-3-chao.p.peng@linux.intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-07-17mips: rename PGD_ORDER to PGD_TABLE_ORDERGravatar Mike Rapoport 1-1/+1
This is the order of the page table allocation, not the order of a PGD. While at it remove unused defintion of _PGD_ORDER in asm-offsets. Link: https://lkml.kernel.org/r/20220703141203.147893-7-rppt@kernel.org Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Dinh Nguyen <dinguyen@kernel.org> Cc: Guo Ren <guoren@kernel.org> Cc: Helge Deller <deller@gmx.de> Cc: Huacai Chen <chenhuacai@kernel.org> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Xuerui Wang <kernel@xen0n.name> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-04MIPS: fix typos in commentsGravatar Julia Lawall 1-1/+1
Various spelling mistakes in comments. Detected with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2022-02-05Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmGravatar Linus Torvalds 1-4/+46
Pull kvm fixes from Paolo Bonzini: "ARM: - A couple of fixes when handling an exception while a SError has been delivered - Workaround for Cortex-A510's single-step erratum RISC-V: - Make CY, TM, and IR counters accessible in VU mode - Fix SBI implementation version x86: - Report deprecation of x87 features in supported CPUID - Preparation for fixing an interrupt delivery race on AMD hardware - Sparse fix All except POWER and s390: - Rework guest entry code to correctly mark noinstr areas and fix vtime' accounting (for x86, this was already mostly correct but not entirely; for ARM, MIPS and RISC-V it wasn't)" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: x86: Use ERR_PTR_USR() to return -EFAULT as a __user pointer KVM: x86: Report deprecated x87 features in supported CPUID KVM: arm64: Workaround Cortex-A510's single-step and PAC trap errata KVM: arm64: Stop handle_exit() from handling HVC twice when an SError occurs KVM: arm64: Avoid consuming a stale esr value when SError occur RISC-V: KVM: Fix SBI implementation version RISC-V: KVM: make CY, TM, and IR counters accessible in VU mode kvm/riscv: rework guest entry logic kvm/arm64: rework guest entry logic kvm/x86: rework guest entry logic kvm/mips: rework guest entry logic kvm: add guest_state_{enter,exit}_irqoff() KVM: x86: Move delivery of non-APICv interrupt into vendor code kvm: Move KVM_GET_XSAVE2 IOCTL definition at the end of kvm.h
2022-02-01kvm/mips: rework guest entry logicGravatar Mark Rutland 1-4/+46
In kvm_arch_vcpu_ioctl_run() we use guest_enter_irqoff() and guest_exit_irqoff() directly, with interrupts masked between these. As we don't handle any timer ticks during this window, we will not account time spent within the guest as guest time, which is unfortunate. Additionally, we do not inform lockdep or tracing that interrupts will be enabled during guest execution, which caan lead to misleading traces and warnings that interrupts have been enabled for overly-long periods. This patch fixes these issues by using the new timing and context entry/exit helpers to ensure that interrupts are handled during guest vtime but with RCU watching, with a sequence: guest_timing_enter_irqoff(); guest_state_enter_irqoff(); < run the vcpu > guest_state_exit_irqoff(); < take any pending IRQs > guest_timing_exit_irqoff(); In addition, as guest exits during the "run the vcpu" step are handled by kvm_mips_handle_exit(), a wrapper function is added which ensures that such exists are handled with a sequence: guest_state_exit_irqoff(); < handle the exit > guest_state_enter_irqoff(); This means that exits which stop the vCPU running will have a redundant guest_state_enter_irqoff() .. guest_state_exit_irqoff() sequence, which can be addressed with future rework. Since instrumentation may make use of RCU, we must also ensure that no instrumented code is run during the EQS. I've split out the critical section into a new kvm_mips_enter_exit_vcpu() helper which is marked noinstr. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com> Cc: Frederic Weisbecker <frederic@kernel.org> Cc: Huacai Chen <chenhuacai@kernel.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul E. McKenney <paulmck@kernel.org> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Message-Id: <20220201132926.3301912-6-mark.rutland@arm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-02-01MIPS: KVM: fix vz.c kernel-doc notationGravatar Randy Dunlap 1-3/+9
Fix all kernel-doc warnings in mips/kvm/vz.c as reported by the kernel test robot: arch/mips/kvm/vz.c:471: warning: Function parameter or member 'out_compare' not described in '_kvm_vz_save_htimer' arch/mips/kvm/vz.c:471: warning: Function parameter or member 'out_cause' not described in '_kvm_vz_save_htimer' arch/mips/kvm/vz.c:471: warning: Excess function parameter 'compare' description in '_kvm_vz_save_htimer' arch/mips/kvm/vz.c:471: warning: Excess function parameter 'cause' description in '_kvm_vz_save_htimer' arch/mips/kvm/vz.c:1551: warning: No description found for return value of 'kvm_trap_vz_handle_cop_unusable' arch/mips/kvm/vz.c:1552: warning: expecting prototype for kvm_trap_vz_handle_cop_unusuable(). Prototype was for kvm_trap_vz_handle_cop_unusable() instead arch/mips/kvm/vz.c:1597: warning: No description found for return value of 'kvm_trap_vz_handle_msa_disabled' Fixes: c992a4f6a9b0 ("KVM: MIPS: Implement VZ support") Fixes: f4474d50c7d4 ("KVM: MIPS/VZ: Support hardware guest timer") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kernel test robot <lkp@intel.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: linux-mips@vger.kernel.org Cc: Huacai Chen <chenhuacai@kernel.org> Cc: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com> Cc: James Hogan <jhogan@kernel.org> Cc: kvm@vger.kernel.org Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-12-09KVM: mips: Use Makefile.kvm for common filesGravatar David Woodhouse 1-1/+2
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Message-Id: <20211121125451.9489-5-dwmw2@infradead.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-12-08KVM: Rename kvm_vcpu_block() => kvm_vcpu_halt()Gravatar Sean Christopherson 1-1/+1
Rename kvm_vcpu_block() to kvm_vcpu_halt() in preparation for splitting the actual "block" sequences into a separate helper (to be named kvm_vcpu_block()). x86 will use the standalone block-only path to handle non-halt cases where the vCPU is not runnable. Rename block_ns to halt_ns to match the new function name. No functional change intended. Reviewed-by: David Matlack <dmatlack@google.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20211009021236.4122790-14-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-12-08KVM: Use interval tree to do fast hva lookup in memslotsGravatar Maciej S. Szmigiero 1-0/+1
The current memslots implementation only allows quick binary search by gfn, quick lookup by hva is not possible - the implementation has to do a linear scan of the whole memslots array, even though the operation being performed might apply just to a single memslot. This significantly hurts performance of per-hva operations with higher memslot counts. Since hva ranges can overlap between memslots an interval tree is needed for tracking them. [sean: handle interval tree updates in kvm_replace_memslot()] Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com> Message-Id: <d66b9974becaa9839be9c4e1a5de97b177b4ac20.1638817640.git.maciej.szmigiero@oracle.com>
2021-12-08KVM: Stop passing kvm_userspace_memory_region to arch memslot hooksGravatar Sean Christopherson 1-2/+0
Drop the @mem param from kvm_arch_{prepare,commit}_memory_region() now that its use has been removed in all architectures. No functional change intended. Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com> Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com> Message-Id: <aa5ed3e62c27e881d0d8bc0acbc1572bc336dc19.1638817640.git.maciej.szmigiero@oracle.com>
2021-12-08KVM: MIPS: Drop pr_debug from memslot commit to avoid using "mem"Gravatar Sean Christopherson 1-4/+0
Remove an old (circa 2012) kvm_debug from kvm_arch_commit_memory_region() to print basic information when committing a memslot change. The primary motivation for removing the kvm_debug is to avoid using @mem, the user memory region, so that said param can be removed. Alternatively, the debug message could be converted to use @new, but that would require synthesizing select state to play nice with the DELETED case, which will pass NULL for @new in the future. And there's no argument to be had for dumping generic information in an arch callback, i.e. if there's a good reason for the debug message, then it belongs in common KVM code where all architectures can benefit. Signed-off-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com> Message-Id: <446929a668f6e1346751571b71db41e94e976cdf.1638817639.git.maciej.szmigiero@oracle.com>
2021-12-08KVM: Let/force architectures to deal with arch specific memslot dataGravatar Sean Christopherson 1-1/+2
Pass the "old" slot to kvm_arch_prepare_memory_region() and force arch code to handle propagating arch specific data from "new" to "old" when necessary. This is a baby step towards dynamically allocating "new" from the get go, and is a (very) minor performance boost on x86 due to not unnecessarily copying arch data. For PPC HV, copy the rmap in the !CREATE and !DELETE paths, i.e. for MOVE and FLAGS_ONLY. This is functionally a nop as the previous behavior would overwrite the pointer for CREATE, and eventually discard/ignore it for DELETE. For x86, copy the arch data only for FLAGS_ONLY changes. Unlike PPC HV, x86 needs to reallocate arch data in the MOVE case as the size of x86's allocations depend on the alignment of the memslot's gfn. Opportunistically tweak kvm_arch_prepare_memory_region()'s param order to match the "commit" prototype. Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com> [mss: add missing RISCV kvm_arch_prepare_memory_region() change] Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com> Message-Id: <67dea5f11bbcfd71e3da5986f11e87f5dd4013f9.1638817639.git.maciej.szmigiero@oracle.com>
2021-12-08KVM: mips: Use kvm_get_vcpu() instead of open-coded accessGravatar Marc Zyngier 2-3/+3
As we are about to change the way vcpus are allocated, mandate the use of kvm_get_vcpu() instead of open-coding the access. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Message-Id: <20211116160403.4074052-3-maz@kernel.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-12-08KVM: Move wiping of the kvm->vcpus array to common codeGravatar Marc Zyngier 1-20/+1
All architectures have similar loops iterating over the vcpus, freeing one vcpu at a time, and eventually wiping the reference off the vcpus array. They are also inconsistently taking the kvm->lock mutex when wiping the references from the array. Make this code common, which will simplify further changes. The locking is dropped altogether, as this should only be called when there is no further references on the kvm structure. Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Message-Id: <20211116160403.4074052-2-maz@kernel.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-11-18KVM: MIPS: Cap KVM_CAP_NR_VCPUS by KVM_CAP_MAX_VCPUSGravatar Vitaly Kuznetsov 1-1/+1
It doesn't make sense to return the recommended maximum number of vCPUs which exceeds the maximum possible number of vCPUs. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Message-Id: <20211116163443.88707-3-vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-11-05Merge tag 'mips_5.16' of ↵Gravatar Linus Torvalds 1-7/+1
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull MIPS updates from Thomas Bogendoerfer: - added printing of CPU options for /proc/cpuinfo - removed support for Netlogic SOCs - fixes and cleanup * tag 'mips_5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MIPS: Cobalt: Explain GT64111 early PCI fixup mips: fix HUGETLB function without THP enabled mips: cm: Convert to bitfield API to fix out-of-bounds access MIPS: Remove NETLOGIC support MIPS: kernel: proc: add CPU option reporting MIPS: kernel: proc: use seq_puts instead of seq_printf MIPS: kernel: proc: fix trivial style errors MIPS: Fix assembly error from MIPSr2 code used within MIPS_ISA_ARCH_LEVEL MIPS: octeon: Remove unused functions MIPS: Loongson64: Add of_node_put() before break bcm47xx: Replace printk(KERN_ALERT ... pci_devname(dev)) with pci_alert() bcm47xx: Get rid of redundant 'else' MIPS: sni: Fix the build MIPS: Avoid macro redefinitions MIPS: loongson64: Fix no screen display during boot-up MIPS: loongson64: make CPU_LOONGSON64 depends on MIPS_FP_SUPPORT
2021-10-24MIPS: Remove NETLOGIC supportGravatar Thomas Bogendoerfer 1-7/+1
No (active) developer owns this hardware, so let's remove Linux support. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-09-30kvm: rename KVM_MAX_VCPU_ID to KVM_MAX_VCPU_IDSGravatar Juergen Gross 1-1/+1
KVM_MAX_VCPU_ID is not specifying the highest allowed vcpu-id, but the number of allowed vcpu-ids. This has already led to confusion, so rename KVM_MAX_VCPU_ID to KVM_MAX_VCPU_IDS to make its semantics more clear Suggested-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20210913135745.13944-3-jgross@suse.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-09-07Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmGravatar Linus Torvalds 2-6/+1
Pull KVM updates from Paolo Bonzini: "ARM: - Page ownership tracking between host EL1 and EL2 - Rely on userspace page tables to create large stage-2 mappings - Fix incompatibility between pKVM and kmemleak - Fix the PMU reset state, and improve the performance of the virtual PMU - Move over to the generic KVM entry code - Address PSCI reset issues w.r.t. save/restore - Preliminary rework for the upcoming pKVM fixed feature - A bunch of MM cleanups - a vGIC fix for timer spurious interrupts - Various cleanups s390: - enable interpretation of specification exceptions - fix a vcpu_idx vs vcpu_id mixup x86: - fast (lockless) page fault support for the new MMU - new MMU now the default - increased maximum allowed VCPU count - allow inhibit IRQs on KVM_RUN while debugging guests - let Hyper-V-enabled guests run with virtualized LAPIC as long as they do not enable the Hyper-V "AutoEOI" feature - fixes and optimizations for the toggling of AMD AVIC (virtualized LAPIC) - tuning for the case when two-dimensional paging (EPT/NPT) is disabled - bugfixes and cleanups, especially with respect to vCPU reset and choosing a paging mode based on CR0/CR4/EFER - support for 5-level page table on AMD processors Generic: - MMU notifier invalidation callbacks do not take mmu_lock unless necessary - improved caching of LRU kvm_memory_slot - support for histogram statistics - add statistics for halt polling and remote TLB flush requests" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (210 commits) KVM: Drop unused kvm_dirty_gfn_invalid() KVM: x86: Update vCPU's hv_clock before back to guest when tsc_offset is adjusted KVM: MMU: mark role_regs and role accessors as maybe unused KVM: MIPS: Remove a "set but not used" variable x86/kvm: Don't enable IRQ when IRQ enabled in kvm_wait KVM: stats: Add VM stat for remote tlb flush requests KVM: Remove unnecessary export of kvm_{inc,dec}_notifier_count() KVM: x86/mmu: Move lpage_disallowed_link further "down" in kvm_mmu_page KVM: x86/mmu: Relocate kvm_mmu_page.tdp_mmu_page for better cache locality Revert "KVM: x86: mmu: Add guest physical address check in translate_gpa()" KVM: x86/mmu: Remove unused field mmio_cached in struct kvm_mmu_page kvm: x86: Increase KVM_SOFT_MAX_VCPUS to 710 kvm: x86: Increase MAX_VCPUS to 1024 kvm: x86: Set KVM_MAX_VCPU_ID to 4*KVM_MAX_VCPUS KVM: VMX: avoid running vmx_handle_exit_irqoff in case of emulation KVM: x86/mmu: Don't freak out if pml5_root is NULL on 4-level host KVM: s390: index kvm->arch.idle_mask by vcpu_idx KVM: s390: Enable specification exception interpretation KVM: arm64: Trim guest debug exception handling KVM: SVM: Add 5-level page table support for SVM ...
2021-09-06KVM: MIPS: Remove a "set but not used" variableGravatar Huacai Chen 1-2/+1
This fix a build warning: arch/mips/kvm/vz.c: In function '_kvm_vz_restore_htimer': >> arch/mips/kvm/vz.c:392:10: warning: variable 'freeze_time' set but not used [-Wunused-but-set-variable] 392 | ktime_t freeze_time; | ^~~~~~~~~~~ Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> Message-Id: <20210406024911.2008046-1-chenhuacai@loongson.cn> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-08-21MIPS: Return true/false (not 1/0) from bool functionsGravatar Huilong Deng 1-2/+2
./arch/mips/kernel/uprobes.c:261:8-9: WARNING: return of 0/1 in function 'arch_uprobe_skip_sstep' with return type bool ./arch/mips/kernel/uprobes.c:78:10-11: WARNING: return of 0/1 in function 'is_trap_insn' with return type bool ./arch/mips/kvm/mmu.c:489:9-10: WARNING: return of 0/1 in function 'kvm_test_age_gfn' with return type bool ./arch/mips/kvm/mmu.c:445:8-9: WARNING: return of 0/1 in function 'kvm_unmap_gfn_range' with return type bool Signed-off-by: Huilong Deng <denghuilong@cdjrlc.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-08-20KVM: stats: Support linear and logarithmic histogram statisticsGravatar Jing Zhang 1-4/+0
Add new types of KVM stats, linear and logarithmic histogram. Histogram are very useful for observing the value distribution of time or size related stats. Signed-off-by: Jing Zhang <jingzhangos@google.com> Message-Id: <20210802165633.1866976-2-jingzhangos@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-07-22mips: clean up kvm MakefileGravatar Masahiro Yamada 1-10/+7
You can use kvm-y instead of kvm-objs to create the composite module. kvm-$(CONFIG_...) looks cleaner. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-07-22mips: replace deprecated EXTRA_CFLAGS with ccflags-yGravatar Masahiro Yamada 1-1/+1
As Documentation/kbuild/makefiles.rst says, EXTRA_CFLAGS is deprecated. Replace it with ccflags-y. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-07-01Merge tag 'mips_5.14' of ↵Gravatar Linus Torvalds 1-2/+1
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull MIPS updates from Thomas Bogendoerfer: - add support for OpeneEmbed SOM9331 board - Ingenic fixes/improvments - other fixes and cleanups * tag 'mips_5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (39 commits) MIPS: Fix PKMAP with 32-bit MIPS huge page support MIPS: CI20: Add second percpu timer for SMP. MIPS: CI20: Reduce clocksource to 750 kHz. MIPS: Ingenic: Add MAC syscon nodes for Ingenic SoCs. dt-bindings: clock: Add documentation for MAC PHY control bindings. MIPS: X1830: Respect cell count of common properties. MIPS: set mips32r5 for virt extensions MIPS: loongsoon64: Reserve memory below starting pfn to prevent Oops MIPS: MT extensions are not available on MIPS32r1 mips/kvm: Use BUG_ON instead of if condition followed by BUG MIPS: OCTEON: octeon-usb: Use devm_platform_get_and_ioremap_resource() MIPS: add PMD table accounting into MIPS'pmd_alloc_one MIPS: Loongson64: fix spelling of SPDX tag MIPS: ingenic: rs90: Add dedicated VRAM memory region MIPS: ingenic: gcw0: Set codec to cap-less mode for FM radio MIPS: ingenic: jz4780: Fix I2C nodes to match DT doc MIPS: ingenic: Select CPU_SUPPORTS_CPUFREQ && MIPS_EXTERNAL_TIMER MIPS: Kconfig: ingenic: Ensure MACH_INGENIC_GENERIC selects all SoCs MIPS: cpu-probe: Fix FPU detection on Ingenic JZ4760(B) MIPS: boot: Support specifying UART port on Ingenic SoCs ...
2021-06-24KVM: debugfs: Reuse binary stats descriptorsGravatar Jing Zhang 1-39/+0
To remove code duplication, use the binary stats descriptors in the implementation of the debugfs interface for statistics. This unifies the definition of statistics for the binary and debugfs interfaces. Signed-off-by: Jing Zhang <jingzhangos@google.com> Message-Id: <20210618222709.1858088-8-jingzhangos@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-06-24KVM: stats: Support binary stats retrieval for a VCPUGravatar Jing Zhang 1-0/+44
Add a VCPU ioctl to get a statistics file descriptor by which a read functionality is provided for userspace to read out VCPU stats header, descriptors and data. Define VCPU statistics descriptors and header for all architectures. Reviewed-by: David Matlack <dmatlack@google.com> Reviewed-by: Ricardo Koller <ricarkol@google.com> Reviewed-by: Krish Sadhukhan <krish.sadhukhan@oracle.com> Reviewed-by: Fuad Tabba <tabba@google.com> Tested-by: Fuad Tabba <tabba@google.com> #arm64 Signed-off-by: Jing Zhang <jingzhangos@google.com> Message-Id: <20210618222709.1858088-5-jingzhangos@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-06-24KVM: stats: Support binary stats retrieval for a VMGravatar Jing Zhang 1-0/+15
Add a VM ioctl to get a statistics file descriptor by which a read functionality is provided for userspace to read out VM stats header, descriptors and data. Define VM statistics descriptors and header for all architectures. Reviewed-by: David Matlack <dmatlack@google.com> Reviewed-by: Ricardo Koller <ricarkol@google.com> Reviewed-by: Krish Sadhukhan <krish.sadhukhan@oracle.com> Reviewed-by: Fuad Tabba <tabba@google.com> Tested-by: Fuad Tabba <tabba@google.com> #arm64 Signed-off-by: Jing Zhang <jingzhangos@google.com> Message-Id: <20210618222709.1858088-4-jingzhangos@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-06-24KVM: stats: Add fd-based API to read binary stats dataGravatar Jing Zhang 1-1/+1
This commit defines the API for userspace and prepare the common functionalities to support per VM/VCPU binary stats data readings. The KVM stats now is only accessible by debugfs, which has some shortcomings this change series are supposed to fix: 1. The current debugfs stats solution in KVM could be disabled when kernel Lockdown mode is enabled, which is a potential rick for production. 2. The current debugfs stats solution in KVM is organized as "one stats per file", it is good for debugging, but not efficient for production. 3. The stats read/clear in current debugfs solution in KVM are protected by the global kvm_lock. Besides that, there are some other benefits with this change: 1. All KVM VM/VCPU stats can be read out in a bulk by one copy to userspace. 2. A schema is used to describe KVM statistics. From userspace's perspective, the KVM statistics are self-describing. 3. With the fd-based solution, a separate telemetry would be able to read KVM stats in a less privileged environment. 4. After the initial setup by reading in stats descriptors, a telemetry only needs to read the stats data itself, no more parsing or setup is needed. Reviewed-by: David Matlack <dmatlack@google.com> Reviewed-by: Ricardo Koller <ricarkol@google.com> Reviewed-by: Krish Sadhukhan <krish.sadhukhan@oracle.com> Reviewed-by: Fuad Tabba <tabba@google.com> Tested-by: Fuad Tabba <tabba@google.com> #arm64 Signed-off-by: Jing Zhang <jingzhangos@google.com> Message-Id: <20210618222709.1858088-3-jingzhangos@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-06-24KVM: stats: Separate generic stats from architecture specific onesGravatar Jing Zhang 1-6/+6
Generic KVM stats are those collected in architecture independent code or those supported by all architectures; put all generic statistics in a separate structure. This ensures that they are defined the same way in the statistics API which is being added, removing duplication among different architectures in the declaration of the descriptors. No functional change intended. Reviewed-by: David Matlack <dmatlack@google.com> Reviewed-by: Ricardo Koller <ricarkol@google.com> Reviewed-by: Krish Sadhukhan <krish.sadhukhan@oracle.com> Signed-off-by: Jing Zhang <jingzhangos@google.com> Message-Id: <20210618222709.1858088-2-jingzhangos@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-06-21mips/kvm: Use BUG_ON instead of if condition followed by BUGGravatar zhouchuangao 1-2/+1
BUG_ON uses unlikely in if(), it can be optimized at compile time. Usually, the condition in if() is not satisfied. In my opinion, this can improve the efficiency of the multi-stage pipeline. Signed-off-by: zhouchuangao <zhouchuangao@vivo.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-05-01Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmGravatar Linus Torvalds 3-112/+28
Pull kvm updates from Paolo Bonzini: "This is a large update by KVM standards, including AMD PSP (Platform Security Processor, aka "AMD Secure Technology") and ARM CoreSight (debug and trace) changes. ARM: - CoreSight: Add support for ETE and TRBE - Stage-2 isolation for the host kernel when running in protected mode - Guest SVE support when running in nVHE mode - Force W^X hypervisor mappings in nVHE mode - ITS save/restore for guests using direct injection with GICv4.1 - nVHE panics now produce readable backtraces - Guest support for PTP using the ptp_kvm driver - Performance improvements in the S2 fault handler x86: - AMD PSP driver changes - Optimizations and cleanup of nested SVM code - AMD: Support for virtual SPEC_CTRL - Optimizations of the new MMU code: fast invalidation, zap under read lock, enable/disably dirty page logging under read lock - /dev/kvm API for AMD SEV live migration (guest API coming soon) - support SEV virtual machines sharing the same encryption context - support SGX in virtual machines - add a few more statistics - improved directed yield heuristics - Lots and lots of cleanups Generic: - Rework of MMU notifier interface, simplifying and optimizing the architecture-specific code - a handful of "Get rid of oprofile leftovers" patches - Some selftests improvements" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (379 commits) KVM: selftests: Speed up set_memory_region_test selftests: kvm: Fix the check of return value KVM: x86: Take advantage of kvm_arch_dy_has_pending_interrupt() KVM: SVM: Skip SEV cache flush if no ASIDs have been used KVM: SVM: Remove an unnecessary prototype declaration of sev_flush_asids() KVM: SVM: Drop redundant svm_sev_enabled() helper KVM: SVM: Move SEV VMCB tracking allocation to sev.c KVM: SVM: Explicitly check max SEV ASID during sev_hardware_setup() KVM: SVM: Unconditionally invoke sev_hardware_teardown() KVM: SVM: Enable SEV/SEV-ES functionality by default (when supported) KVM: SVM: Condition sev_enabled and sev_es_enabled on CONFIG_KVM_AMD_SEV=y KVM: SVM: Append "_enabled" to module-scoped SEV/SEV-ES control variables KVM: SEV: Mask CPUID[0x8000001F].eax according to supported features KVM: SVM: Move SEV module params/variables to sev.c KVM: SVM: Disable SEV/SEV-ES if NPT is disabled KVM: SVM: Free sev_asid_bitmap during init if SEV setup fails KVM: SVM: Zero out the VMCB array used to track SEV ASID association x86/sev: Drop redundant and potentially misleading 'sev_enabled' KVM: x86: Move reverse CPUID helpers to separate header file KVM: x86: Rename GPR accessors to make mode-aware variants the defaults ...
2021-04-17KVM: MIPS/MMU: Convert to the gfn-based MMU notifier callbacksGravatar Sean Christopherson 1-79/+13
Move MIPS to the gfn-based MMU notifier APIs, which do the hva->gfn lookup in common code, and whose code is nearly identical to MIPS' lookup. No meaningful functional change intended, though the exact order of operations is slightly different since the memslot lookups occur before calling into arch code. Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20210402005658.3024832-5-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-04-17KVM: MIPS: defer flush to generic MMU notifier codeGravatar Paolo Bonzini 1-9/+2
Return 1 from kvm_unmap_hva_range and kvm_set_spte_hva if a flush is needed, so that the generic code can coalesce the flushes. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-04-17KVM: MIPS: let generic code call prepare_flush_shadowGravatar Paolo Bonzini 2-10/+7
Since all calls to kvm_flush_remote_tlbs must be preceded by kvm_mips_callbacks->prepare_flush_shadow, repurpose kvm_arch_flush_remote_tlb to invoke it. This makes it possible to use the TLB flushing mechanism provided by the generic MMU notifier code. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-04-17KVM: MIPS: rework flush_shadow_* callbacks into one that prepares the flushGravatar Paolo Bonzini 4-35/+18
Both trap-and-emulate and VZ have a single implementation that covers both .flush_shadow_all and .flush_shadow_memslot, and both of them end with a call to kvm_flush_remote_tlbs. Unify the callbacks into one and extract the call to kvm_flush_remote_tlbs. The next patches will pull it further out of the the architecture-specific MMU notifier functions kvm_unmap_hva_range and kvm_set_spte_hva. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-04-17KVM: constify kvm_arch_flush_remote_tlbs_memslotGravatar Paolo Bonzini 1-1/+1
memslots are stored in RCU and there should be no need to change them. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-03-10MIPS: Remove KVM_TE supportGravatar Thomas Bogendoerfer 14-4023/+23
After removal of the guest part of KVM TE (trap and emulate), also remove the host part. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-02-03KVM: MIPS: remove unneeded semicolonGravatar Yang Li 1-1/+1
Eliminate the following coccicheck warning: ./arch/mips/kvm/mips.c:151:2-3: Unneeded semicolon Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Reviewed-by: Huacai Chen <chenhuacai@kernel.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-11-19MIPS: kvm: Use vm_get_page_prot to get protection bitsGravatar Thomas Bogendoerfer 1-1/+3
MIPS protection bits are setup during runtime so using defines like PAGE_SHARED ignores this runtime changes. Using vm_get_page_prot to get correct page protection fixes this. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-09-28KVM: MIPS: clean up redundant kvm_run parameters in assemblyGravatar Tianjia Zhang 4-16/+12
In the current kvm version, 'kvm_run' has been included in the 'kvm_vcpu' structure. For historical reasons, many kvm-related function parameters retain the 'kvm_run' and 'kvm_vcpu' parameters at the same time. This patch does a unified cleanup of these remaining redundant parameters. Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com> Reviewed-by: Huacai Chen <chenhc@lemote.com> Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Message-Id: <20200623131418.31473-6-tianjia.zhang@linux.alibaba.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-11KVM: MIPS: Change the definition of kvm typeGravatar Huacai Chen 1-0/+2
MIPS defines two kvm types: #define KVM_VM_MIPS_TE 0 #define KVM_VM_MIPS_VZ 1 In Documentation/virt/kvm/api.rst it is said that "You probably want to use 0 as machine type", which implies that type 0 be the "automatic" or "default" type. And, in user-space libvirt use the null-machine (with type 0) to detect the kvm capability, which returns "KVM not supported" on a VZ platform. I try to fix it in QEMU but it is ugly: https://lists.nongnu.org/archive/html/qemu-devel/2020-08/msg05629.html And Thomas Huth suggests me to change the definition of kvm type: https://lists.nongnu.org/archive/html/qemu-devel/2020-09/msg03281.html So I define like this: #define KVM_VM_MIPS_AUTO 0 #define KVM_VM_MIPS_VZ 1 #define KVM_VM_MIPS_TE 2 Since VZ and TE cannot co-exists, using type 0 on a TE platform will still return success (so old user-space tools have no problems on new kernels); the advantage is that using type 0 on a VZ platform will not return failure. So, the only problem is "new user-space tools use type 2 on old kernels", but if we treat this as a kernel bug, we can backport this patch to old stable kernels. Signed-off-by: Huacai Chen <chenhc@lemote.com> Message-Id: <1599734031-28746-1-git-send-email-chenhc@lemote.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-08-21KVM: Pass MMU notifier range flags to kvm_unmap_hva_range()Gravatar Will Deacon 1-1/+2
The 'flags' field of 'struct mmu_notifier_range' is used to indicate whether invalidate_range_{start,end}() are permitted to block. In the case of kvm_mmu_notifier_invalidate_range_start(), this field is not forwarded on to the architecture-specific implementation of kvm_unmap_hva_range() and therefore the backend cannot sensibly decide whether or not to block. Add an extra 'flags' parameter to kvm_unmap_hva_range() so that architectures are aware as to whether or not they are permitted to block. Cc: <stable@vger.kernel.org> Cc: Marc Zyngier <maz@kernel.org> Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: James Morse <james.morse@arm.com> Signed-off-by: Will Deacon <will@kernel.org> Message-Id: <20200811102725.7121-2-will@kernel.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-08-11KVM: MIPS/VZ: Fix build error caused by 'kvm_run' cleanupGravatar Xingxing Su 1-2/+1
Commit c34b26b98caca48ec9ee9 ("KVM: MIPS: clean up redundant 'kvm_run' parameters") remove the 'kvm_run' parameter in kvm_vz_gpsi_lwc2. The following build error: arch/mips/kvm/vz.c: In function 'kvm_trap_vz_handle_gpsi': arch/mips/kvm/vz.c:1243:43: error: 'run' undeclared (first use in this function) er = kvm_vz_gpsi_lwc2(inst, opc, cause, run, vcpu); ^~~ arch/mips/kvm/vz.c:1243:43: note: each undeclared identifier is reported only once for each function it appears in scripts/Makefile.build:283: recipe for target 'arch/mips/kvm/vz.o' failed make[2]: *** [arch/mips/kvm/vz.o] Error 1 scripts/Makefile.build:500: recipe for target 'arch/mips/kvm' failed make[1]: *** [arch/mips/kvm] Error 2 Makefile:1785: recipe for target 'arch/mips' failed make: *** [arch/mips] Error 2 Signed-off-by: Xingxing Su <suxingxing@loongson.cn> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-08-10MIPS: KVM: Convert a fallthrough comment to fallthroughGravatar Jiaxun Yang 1-1/+1
There is a fallthrough comment being forgotten, GCC complains about it: arch/mips/kvm/emulate.c: In function kvm_mips_emulate_load: arch/mips/kvm/emulate.c:1936:21: error: this statement may fall through 1936 | vcpu->mmio_needed = 1; /* unsigned */ | ~~~~~~~~~~~~~~~~~~^~~ arch/mips/kvm/emulate.c:1939:2: note: here 1939 | case lw_op: Just fix it. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Reviewed-by: Huacai Chen <chenhc@lemote.com> Message-Id: <20200810011749.3211128-1-jiaxun.yang@flygoat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-08-09MIPS: VZ: Only include loongson_regs.h for CPU_LOONGSON64Gravatar Huacai Chen 1-0/+2
Only Loongson64 platform has and needs loongson_regs.h, including it unconditionally will cause build errors. Fixes: 7f2a83f1c2a941ebfee5 ("KVM: MIPS: Add CPUCFG emulation for Loongson-3") Cc: stable@vger.kernel.org Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Huacai Chen <chenhc@lemote.com> Message-Id: <1596891052-24052-1-git-send-email-chenhc@lemote.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-08-06Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmGravatar Linus Torvalds 7-200/+94
Pull KVM updates from Paolo Bonzini: "s390: - implement diag318 x86: - Report last CPU for debugging - Emulate smaller MAXPHYADDR in the guest than in the host - .noinstr and tracing fixes from Thomas - nested SVM page table switching optimization and fixes Generic: - Unify shadow MMU cache data structures across architectures" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (127 commits) KVM: SVM: Fix sev_pin_memory() error handling KVM: LAPIC: Set the TDCR settable bits KVM: x86: Specify max TDP level via kvm_configure_mmu() KVM: x86/mmu: Rename max_page_level to max_huge_page_level KVM: x86: Dynamically calculate TDP level from max level and MAXPHYADDR KVM: VXM: Remove temporary WARN on expected vs. actual EPTP level mismatch KVM: x86: Pull the PGD's level from the MMU instead of recalculating it KVM: VMX: Make vmx_load_mmu_pgd() static KVM: x86/mmu: Add separate helper for shadow NPT root page role calc KVM: VMX: Drop a duplicate declaration of construct_eptp() KVM: nSVM: Correctly set the shadow NPT root level in its MMU role KVM: Using macros instead of magic values MIPS: KVM: Fix build error caused by 'kvm_run' cleanup KVM: nSVM: remove nonsensical EXITINFO1 adjustment on nested NPF KVM: x86: Add a capability for GUEST_MAXPHYADDR < HOST_MAXPHYADDR support KVM: VMX: optimize #PF injection when MAXPHYADDR does not match KVM: VMX: Add guest physical address check in EPT violation and misconfig KVM: VMX: introduce vmx_need_pf_intercept KVM: x86: update exception bitmap on CPUID changes KVM: x86: rename update_bp_intercept to update_exception_bitmap ...
2020-08-06Merge tag 'mips_5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linuxGravatar Linus Torvalds 1-2/+2
Pull MIPS upates from Thomas Bogendoerfer: - improvements for Loongson64 - extended ingenic support - removal of not maintained paravirt system type - cleanups and fixes * tag 'mips_5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (81 commits) MIPS: SGI-IP27: always enable NUMA in Kconfig MAINTAINERS: Update KVM/MIPS maintainers MIPS: Update default config file for Loongson-3 MIPS: KVM: Add kvm guest support for Loongson-3 dt-bindings: mips: Document Loongson kvm guest board MIPS: handle Loongson-specific GSExc exception MIPS: add definitions for Loongson-specific CP0.Diag1 register MIPS: only register FTLBPar exception handler for supported models MIPS: ingenic: Hardcode mem size for qi,lb60 board MIPS: DTS: ingenic/qi,lb60: Add model and memory node MIPS: ingenic: Use fw_passed_dtb even if CONFIG_BUILTIN_DTB MIPS: head.S: Init fw_passed_dtb to builtin DTB of: address: Fix parser address/size cells initialization of_address: Guard of_bus_pci_get_flags with CONFIG_PCI MIPS: DTS: Fix number of msi vectors for Loongson64G MIPS: Loongson64: Add ISA node for LS7A PCH MIPS: Loongson64: DTS: Fix ISA and PCI I/O ranges for RS780E PCH MIPS: Loongson64: Enlarge IO_SPACE_LIMIT MIPS: Loongson64: Process ISA Node in DeviceTree of_address: Add bus type match for pci ranges parser ...
Copyright © 1990 – 2022 jet tsang zeon-git.
All Rights Reverse Engineered.