| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
We should not be calling virtio_break_device from an IRQ context.
Move breaking the device into the workqueue so that it is done from
a reasonable context.
Fixes: af9fb41ed315 ("um: virtio_uml: Fix broken device handling in time-travel")
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
Mark the device as not registered anymore when scheduling the work to
remove it. Otherwise we could end up scheduling the work multiple times
in a row, including scheduling it while it is already running.
Fixes: af9fb41ed315 ("um: virtio_uml: Fix broken device handling in time-travel")
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
while(){}, semicolon do not need to be appended.
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2237
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
If VHOST_USER_PROTOCOL_F_INBAND_NOTIFICATIONS is activated, the user mode
linux virtio irq handler only read one msg from the corresponding socket.
This creates issues, when the device emulation creates multiple call
requests (e.g. for multiple virtqueues), as the socket buffer tend to fill
up and the call requests are delayed.
This creates a deadlock situation, when the device simulation blocks,
because of sending a msg and the kernel side blocks because of
synchronously waiting for an acknowledge of kick request.
Actually inband notifications are meant to be used in combination with the
time travel protocol, but it is not required, therefore this corner case
needs to be handled.
Anyways, in general it seems to be more natural to consume always all
messages from a socket, instead of only a single one.
Fixes: 2cd097ba8c05 ("um: virtio: Implement VHOST_USER_PROTOCOL_F_SLAVE_REQ")
Signed-off-by: Benjamin Beichler <benjamin.beichler@uni-rostock.de>
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
This reverts commit a10fba0377145fccefea4dc4dd5915b7ed87e546: the
proposed API isn't supported on all transports but no
effort was made to address this.
It might not be hard to fix if we want to: maybe just
rename size to size_hint and make sure legacy
transports ignore the hint.
But it's not sure what the benefit is in any case, so
let's drop it.
Fixes: a10fba037714 ("virtio: find_vqs() add arg sizes")
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20220816053602.173815-8-mst@redhat.com>
|
|
find_vqs() adds a new parameter sizes to specify the size of each vq
vring.
NULL as sizes means that all queues in find_vqs() use the maximum size.
A value in the array is 0, which means that the corresponding queue uses
the maximum size.
In the split scenario, the meaning of size is the largest size, because
it may be limited by memory, the virtio core will try a smaller size.
And the size is power of 2.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20220801063902.129329-34-xuanzhuo@linux.alibaba.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
virtio-net can display the maximum (supported by hardware) ring size in
ethtool -g eth0.
When the subsequent patch implements vring reset, it can judge whether
the ring size passed by the driver is legal based on this.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20220801063902.129329-2-xuanzhuo@linux.alibaba.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
If a device implementation crashes, virtio_uml will mark it
as dead by calling virtio_break_device() and scheduling the
work that will remove it.
This still seems like the right thing to do, but it's done
directly while reading the message, and if time-travel is
used, this is in the time-travel handler, outside of the
normal Linux machinery. Therefore, we cannot acquire locks
or do normal "linux-y" things because e.g. lockdep will be
confused about the context.
Move handling this situation out of the read function and
into the actual IRQ handler and response handling instead,
so that in the case of time-travel we don't call it in the
wrong context.
Chances are the system will still crash immediately, since
the device implementation crashing may also cause the time-
travel controller to go down, but at least all of that now
happens without strange warnings from lockdep.
Fixes: c8177aba37ca ("um: time-travel: rework interrupt handling in ext mode")
Cc: stable@vger.kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
Allow the virtio_uml device to be probed from the devicetree so that
sub-devices can be specified using the standard virtio bindings, for
example:
virtio@1 {
compatible = "virtio,uml";
socket-path = "i2c.sock";
virtio-device-id = <0x22>;
i2c-controller {
compatible = "virtio,device22";
#address-cells = <0x01>;
#size-cells = <0x00>;
light-sensor@01 {
compatible = "ti,opt3001";
reg = <0x01>;
};
};
};
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
When creating an external event, the current time needs to
be propagated to other participants of a simulation. This
is done in the places here where we kick a virtq etc.
However, it must be done for _all_ external events, and
that includes making the initial socket connection and
later closing it. Call time_travel_propagate_time() to do
this before making or closing the socket connection.
Apparently, at least for the initial connection creation,
due to the remote side in my use cases using microseconds
(rather than nanoseconds), this wasn't a problem yet; only
started failing between 5.14-rc1 and 5.15-rc1 (didn't test
others much), or possibly depending on the configuration,
where more delays happen before the virtio devices are
initialized.
Fixes: 88ce64249233 ("um: Implement time-travel=ext")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
If initialization fails, e.g. because the connection failed,
we leak the 'vu_dev'. Fix that. Reported by smatch.
Fixes: 5d38f324993f ("um: drivers: Add virtio vhost-user driver")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-By: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
This fixes a sparse warning, since the function defined
here should have a declaration (or be static).
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 43c590cb8666 ("um: virtio/pci: enable suspend/resume")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-By: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
The UM virtual PCI devices currently cannot be suspended properly
since the virtio driver already disables VQs well before the PCI
bus's suspend_noirq wants to complete the transition by writing to
PCI config space.
After trying around for a long time with moving the devices on the
DPM list, trying to create dependencies between them, etc. I gave
up and instead added UML specific cross-driver API that lets the
virt-pci code enable not suspending/resuming VQs for its devices.
This then allows the PCI bus suspend_noirq to still talk to the
device, and suspend/resume works properly.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
With all the IRQ machinery being in place, we can allow virtio
devices to additionally be configured as wakeup sources, in
which case basically any interrupt from them wakes us up. Note
that this requires a call FD because the VQs are all disabled.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
In external time-travel mode, where time is controlled via the
controller application socket, interrupt handling is a little
tricky. For example on virtio, the following happens:
* we receive a message (that requires an ACK) on the vhost-user socket
* we add a time-travel event to handle the interrupt
(this causes communication on the time socket)
* we ACK the original vhost-user message
* we then handle the interrupt once the event is triggered
This protocol ensures that the sender of the interrupt only continues
to run in the simulation when the time-travel event has been added.
So far, this was only done in the virtio driver, but it was actually
wrong, because only virtqueue interrupts were handled this way, and
config change interrupts were handled immediately. Additionally, the
messages were actually handled in the real Linux interrupt handler,
but Linux interrupt handlers are part of the simulation and shouldn't
run while there's no time event.
To really do this properly and only handle all kinds of interrupts in
the time-travel event when we are scheduled to run in the simulation,
rework this to plug in to the lower interrupt layers in UML directly:
Add a um_request_irq_tt() function that let's a time-travel aware
driver request an interrupt with an additional timetravel_handler()
that is called outside of the context of the simulation, to handle
the message only. It then adds an event to the time-travel calendar
if necessary, and no "real" Linux code runs outside of the time
simulation.
This also hooks in with suspend/resume properly now, since this new
timetravel_handler() can run while Linux is suspended and interrupts
are disabled, and decide to wake up (or not) the system based on the
message it received. Importantly in this case, it ACKs the message
before the system even resumes and interrupts are re-enabled, thus
allowing the simulation to progress properly.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
If the system is suspended, the device shouldn't be able to send
anything to it. Disable virtqueues in suspend to simulate this,
and as we might be only using s2idle (kernel services are still
on), prevent sending anything on them as well.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
If we have a message without payload, we call full_read() with
len set to 0, which causes it to return -ECONNRESET. Catch this
case and explicitly return 0 for it so we can actually use the
zero-size config-changed message.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
There's no 'simtime' device, because implementing that through
virtio was just too much complexity. Clean up the comment that
still refers to it.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
Since struct device is refcounted, we shouldn't free the vu_dev
immediately when it's removed from the platform device, but only
when the references actually all go away. Move the freeing to
the release to accomplish that.
Fixes: 5d38f324993f ("um: drivers: Add virtio vhost-user driver")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
We don't actually use this in um_request_irq(), so it can
never be assigned. It's also not clear what that would be
useful for, so just remove it.
This results in quite a number of cleanups, all the way to
removing the "SIGIO on close" startup check, since the data
it assigns (pty_close_sigio) is not used anymore.
While at it, also make this an enum so we get a minimum of
type checking, and remove the IRQ_NONE hack in virtio since
we now no longer have the name twice.
Acked-By: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-By: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
This separates the devices, which is better for debug and for
later suspend/resume and wakeup support, since there we'll
have to separate which IRQs can wake up the system and which
cannot.
Acked-By: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-By: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
It's cumbersome and error-prone to keep adding fixed IRQ numbers,
and for proper device wakeup support for the virtio/vhost-user
support we need to have different IRQs for each device. Even if
in theory two IRQs (with and without wake) might be sufficient,
it's much easier to reason about it when we have dynamic number
assignment. It also makes it easier to add new devices that may
dynamically exist or depending on the configuration, etc.
Add support for this, up to 64 IRQs (the same limit as epoll FDs
we have right now). Since it's not easy to port all the existing
places to dynamic allocation (some data is statically initialized)
keep the low numbers are reserved for the existing hard-coded IRQ
numbers.
Acked-By: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-By: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
Rename the bit to match latest virtio spec.
Add a compat macro to avoid breaking existing userspace.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
|
|
Defining a macro with ... and __VA_ARGS__ (without ##) can cause
compilation errors if a macro use does not have additional args.
Add ## to __VA_ARGS__ in the macro definition.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
This implements synchronized time-travel mode which - using a special
application on a unix socket - lets multiple machines take part in a
time-travelling simulation together.
The protocol for the unix domain socket is defined in the new file
include/uapi/linux/um_timetravel.h.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
Implement in-band notifications that are necessary for running
vhost-user devices under externally synchronized time-travel
mode (which is in a follow-up patch). This feature makes what
usually should be eventfd notifications in-band messages.
We'll prefer this feature, under the assumption that only a
few (simulation) devices will ever support it, since it's not
very efficient.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
This driver *can* be a module, but then its parameters (socket path)
are untrusted data from inside the VM, and that isn't allowed. Allow
the code to only be built-in to avoid that.
Fixes: 5d38f324993f ("um: drivers: Add virtio vhost-user driver")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-by: Anton Ivanov <anton.ivanov@cambridgegreys.co.uk>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
When we get an interrupt from the socket getting readable,
and start reading, there's a possibility for a race. This
depends on the implementation of the device, but e.g. with
qemu's libvhost-user, we can see:
device virtio_uml
---------------------------------------
write header
get interrupt
read header
read body -> returns -EAGAIN
write body
The -EAGAIN return is because the socket is non-blocking,
and then this leads us to abandon this message.
In fact, we've already read the header, so when the get
another signal/interrupt for the body, we again read it
as though it's a new message header, and also abandon it
for the same reason (wrong size etc.)
This essentially breaks things, and if that message was
one that required a response, it leads to a deadlock as
the device is waiting for the response but we'll never
reply.
Fix this by spinning on -EAGAIN as well when we read the
message body. We need to handle -EAGAIN as "no message"
while reading the header, since we share an interrupt.
Note that this situation is highly unlikely to occur in
normal usage, since there will be very few messages and
only in the startup phase. With the inband call feature
this does tend to happen (eventually) though.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
If the connection drops, just remove the device, we don't try
to recover from this right now.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
Implement the VHOST_USER_PROTOCOL_F_REPLY_ACK extension for both
slave requests (previous patch) where we have to reply and our
own requests where it helps understand if the slave failed.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
Implement the communication channel for the device to notify
us of some events, and notably implement the handling of the
config updates needed for the combination of this feature
and VHOST_USER_PROTOCOL_F_CONFIG.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
This module allows virtio devices to be used over a vhost-user socket.
Signed-off-by: Erel Geron <erelx.geron@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
Benjamin Berg
Yang Li
Benjamin Beichler
Michael S. Tsirkin
Xuan Zhuo
Johannes Berg
Vincent Whitchurch
Joe Perches
Erel Geron
