aboutsummaryrefslogtreecommitdiff
path: root/arch/x86/pci
AgeCommit message (Collapse)AuthorFilesLines
2023-10-06x86/PCI: Avoid PME from D3hot/D3cold for AMD Rembrandt and Phoenix USB4Gravatar Mario Limonciello 1-0/+59
Iain reports that USB devices can't be used to wake a Lenovo Z13 from suspend. This occurs because on some AMD platforms, even though the Root Ports advertise PME_Support for D3hot and D3cold, wakeup events from devices on a USB4 controller don't result in wakeup interrupts from the Root Port when amd-pmc has put the platform in a hardware sleep state. If amd-pmc will be involved in the suspend, remove D3hot and D3cold from the PME_Support mask of Root Ports above USB4 controllers so we avoid those states if we need wakeups. Restore D3 support at resume so that it can be used by runtime suspend. This affects both AMD Rembrandt and Phoenix SoCs. "pm_suspend_target_state == PM_SUSPEND_ON" means we're doing runtime suspend, and amd-pmc will not be involved. In that case PMEs work as advertised in D3hot/D3cold, so we don't need to do anything. Note that amd-pmc is technically optional, and there's no need for this quirk if it's not present, but we assume it's always present because power consumption is so high without it. Fixes: 9d26d3a8f1b0 ("PCI: Put PCIe ports into D3 during suspend") Link: https://lore.kernel.org/r/20231004144959.158840-1-mario.limonciello@amd.com Reported-by: Iain Lane <iain@orangesquash.org.uk> Closes: https://forums.lenovo.com/t5/Ubuntu/Z13-can-t-resume-from-suspend-with-external-USB-keyboard/m-p/5217121 Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> [bhelgaas: commit log, move to arch/x86/pci/fixup.c, add #includes] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org
2023-08-30Merge tag 'pci-v6.6-changes' of ↵Gravatar Linus Torvalds 1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci Pull PCI updates from Bjorn Helgaas: "Enumeration: - Add locking to read/modify/write PCIe Capability Register accessors for Link Control and Root Control - Use pci_dev_id() when possible instead of manually composing ID from dev->bus->number and dev->devfn Resource management: - Move prototypes for __weak sysfs resource files to linux/pci.h to fix 'no previous prototype' warnings - Make more I/O port accesses depend on HAS_IOPORT - Use devm_platform_get_and_ioremap_resource() instead of open-coding platform_get_resource() followed by devm_ioremap_resource() Power management: - Ensure devices are powered up while accessing VPD - If device is powered-up, keep it that way while polling for PME - Only read PCI_PM_CTRL register when available, to avoid reading the wrong register and corrupting dev->current_state Virtualization: - Avoid Secondary Bus Reset on NVIDIA T4 GPUs Error handling: - Remove unused pci_disable_pcie_error_reporting() - Unexport pci_enable_pcie_error_reporting(), used only by aer.c - Unexport pcie_port_bus_type, used only by PCI core VGA: - Simplify and clean up typos in VGA arbiter Apple PCIe controller driver: - Initialize pcie->nvecs (number of available MSIs) before use Broadcom iProc PCIe controller driver: - Use of_property_read_bool() instead of low-level accessors for boolean properties Broadcom STB PCIe controller driver: - Assert PERST# when probing BCM2711 because some bootloaders don't do it Freescale i.MX6 PCIe controller driver: - Add .host_deinit() callback so we can clean up things like regulators on probe failure or driver unload Freescale Layerscape PCIe controller driver: - Add support for link-down notification so the endpoint driver can process LINK_DOWN events - Add suspend/resume support, including manual PME_Turn_off/PME_TO_Ack handshake - Save Link Capabilities during probe so they can be restored when handling a link-up event, since the controller loses the Link Width and Link Speed values during reset Intel VMD host bridge driver: - Fix disable of bridge windows during domain reset; previously we cleared the base/limit registers, which actually left the windows enabled Marvell MVEBU PCIe controller driver: - Remove unused busn member Microchip PolarFlare PCIe controller driver: - Fix interrupt bit definitions so the SEC and DED interrupt handlers work correctly - Make driver buildable as a module - Read FPGA MSI configuration parameters from hardware instead of hard-coding them Microsoft Hyper-V host bridge driver: - To avoid a NULL pointer dereference, skip MSI restore after hibernate if MSI/MSI-X hasn't been enabled NVIDIA Tegra194 PCIe controller driver: - Revert 'PCI: tegra194: Enable support for 256 Byte payload' because Linux doesn't know how to reduce MPS from to 256 to 128 bytes for endpoints below a switch (because other devices below the switch might already be operating), which leads to 'Malformed TLP' errors Qualcomm PCIe controller driver: - Add DT and driver support for interconnect bandwidth voting for 'pcie-mem' and 'cpu-pcie' interconnects - Fix broken SDX65 'compatible' DT property - Configure controller so MHI bus master clock will be switched off while in ASPM L1.x states - Use alignment restriction from EPF core in EPF MHI driver - Add Endpoint eDMA support - Add MHI eDMA support - Add Snapdragon SM8450 support to the EPF MHI driversupport - Add MHI eDMA support - Add Snapdragon SM8450 support to the EPF MHI driversupport - Add MHI eDMA support - Add Snapdragon SM8450 support to the EPF MHI driversupport - Add MHI eDMA support - Add Snapdragon SM8450 support to the EPF MHI driver - Use iATU for EPF MHI transfers smaller than 4K to avoid eDMA setup latency - Add sa8775p DT binding and driver support Rockchip PCIe controller driver: - Use 64-bit mask on MSI 64-bit PCI address to avoid zeroing out the upper 32 bits SiFive FU740 PCIe controller driver: - Set the supported number of MSI vectors so we can use all available MSI interrupts Synopsys DesignWare PCIe controller driver: - Add generic dwc suspend/resume APIs (dw_pcie_suspend_noirq() and dw_pcie_resume_noirq()) to be called by controller driver suspend/resume ops, and a controller callback to send PME_Turn_Off MicroSemi Switchtec management driver: - Add support for PCIe Gen5 devices Miscellaneous: - Reorder and compress to reduce size of struct pci_dev - Fix race in DOE destroy_work_on_stack() - Add stubs to avoid casts between incompatible function types - Explicitly include correct DT includes to untangle headers" * tag 'pci-v6.6-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (96 commits) PCI: qcom-ep: Add ICC bandwidth voting support dt-bindings: PCI: qcom: ep: Add interconnects path PCI: qcom-ep: Treat unknown IRQ events as an error dt-bindings: PCI: qcom: Fix SDX65 compatible PCI: endpoint: Add kernel-doc for pci_epc_mem_init() API PCI: epf-mhi: Use iATU for small transfers PCI: epf-mhi: Add support for SM8450 PCI: epf-mhi: Add eDMA support PCI: qcom-ep: Add eDMA support PCI: epf-mhi: Make use of the alignment restriction from EPF core PCI/PM: Only read PCI_PM_CTRL register when available PCI: qcom: Add support for sa8775p SoC dt-bindings: PCI: qcom: Add sa8775p compatible PCI: qcom-ep: Pass alignment restriction to the EPF core PCI: Simplify pcie_capability_clear_and_set_word() control flow PCI: Tidy config space save/restore messages PCI: Fix code formatting inconsistencies PCI: Fix typos in docs and comments PCI: Fix pci_bus_resetable(), pci_slot_resetable() name typos PCI: Simplify pci_dev_driver() ...
2023-08-30Merge tag 'x86_apic_for_6.6-rc1' of ↵Gravatar Linus Torvalds 1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 apic updates from Dave Hansen: "This includes a very thorough rework of the 'struct apic' handlers. Quite a variety of them popped up over the years, especially in the 32-bit days when odd apics were much more in vogue. The end result speaks for itself, which is a removal of a ton of code and static calls to replace indirect calls. If there's any breakage here, it's likely to be around the 32-bit museum pieces that get light to no testing these days. Summary: - Rework apic callbacks, getting rid of unnecessary ones and coalescing lots of silly duplicates. - Use static_calls() instead of indirect calls for apic->foo() - Tons of cleanups an crap removal along the way" * tag 'x86_apic_for_6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (64 commits) x86/apic: Turn on static calls x86/apic: Provide static call infrastructure for APIC callbacks x86/apic: Wrap IPI calls into helper functions x86/apic: Mark all hotpath APIC callback wrappers __always_inline x86/xen/apic: Mark apic __ro_after_init x86/apic: Convert other overrides to apic_update_callback() x86/apic: Replace acpi_wake_cpu_handler_update() and apic_set_eoi_cb() x86/apic: Provide apic_update_callback() x86/xen/apic: Use standard apic driver mechanism for Xen PV x86/apic: Provide common init infrastructure x86/apic: Wrap apic->native_eoi() into a helper x86/apic: Nuke ack_APIC_irq() x86/apic: Remove pointless arguments from [native_]eoi_write() x86/apic/noop: Tidy up the code x86/apic: Remove pointless NULL initializations x86/apic: Sanitize APIC ID range validation x86/apic: Prepare x2APIC for using apic::max_apic_id x86/apic: Simplify X2APIC ID validation x86/apic: Add max_apic_id member x86/apic: Wrap APIC ID validation into an inline ...
2023-08-18range.h: Move resource API and constant to respective filesGravatar Andy Shevchenko 2-1/+9
range.h works with struct range data type. The resource_size_t is an alien here. (1) Move cap_resource() implementation into its only user, and (2) rename and move RESOURCE_SIZE_MAX to limits.h. Link: https://lkml.kernel.org/r/20230804064636.15368-1-andriy.shevchenko@linux.intel.com Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Alexander Sverdlin <alexander.sverdlin@nokia.com> Cc: Borislav Petkov (AMD) <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-08-09x86/apic: Rename disable_apicGravatar Thomas Gleixner 1-1/+1
It reflects a state and not a command. Make it bool while at it. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Michael Kelley <mikelley@microsoft.com> Tested-by: Sohil Mehta <sohil.mehta@intel.com> Tested-by: Juergen Gross <jgross@suse.com> # Xen PV (dom0 and unpriv. guest)
2023-07-13x86/PCI: Use struct_size() in pirq_convert_irt_table()Gravatar Christophe JAILLET 1-2/+2
Use struct_size() instead of hand-writing it. It is less verbose, more robust and more informative. Link: https://lore.kernel.org/r/00a5cc2cd322e7dea26579916ac6dda9c637aa57.1684518118.git.christophe.jaillet@wanadoo.fr Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2023-06-26Merge tag 'x86_cleanups_for_6.5' of ↵Gravatar Linus Torvalds 1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 cleanups from Dave Hansen: "As usual, these are all over the map. The biggest cluster is work from Arnd to eliminate -Wmissing-prototype warnings: - Address -Wmissing-prototype warnings - Remove repeated 'the' in comments - Remove unused current_untag_mask() - Document urgent tip branch timing - Clean up MSR kernel-doc notation - Clean up paravirt_ops doc - Update Srivatsa S. Bhat's maintained areas - Remove unused extern declaration acpi_copy_wakeup_routine()" * tag 'x86_cleanups_for_6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (22 commits) x86/acpi: Remove unused extern declaration acpi_copy_wakeup_routine() Documentation: virt: Clean up paravirt_ops doc x86/mm: Remove unused current_untag_mask() x86/mm: Remove repeated word in comments x86/lib/msr: Clean up kernel-doc notation x86/platform: Avoid missing-prototype warnings for OLPC x86/mm: Add early_memremap_pgprot_adjust() prototype x86/usercopy: Include arch_wb_cache_pmem() declaration x86/vdso: Include vdso/processor.h x86/mce: Add copy_mc_fragile_handle_tail() prototype x86/fbdev: Include asm/fb.h as needed x86/hibernate: Declare global functions in suspend.h x86/entry: Add do_SYSENTER_32() prototype x86/quirks: Include linux/pnp.h for arch_pnpbios_disabled() x86/mm: Include asm/numa.h for set_highmem_pages_init() x86: Avoid missing-prototype warnings for doublefault code x86/fpu: Include asm/fpu/regset.h x86: Add dummy prototype for mk_early_pgtbl_32() x86/pci: Mark local functions as 'static' x86/ftrace: Move prepare_ftrace_return prototype to header ...
2023-05-27Merge tag 'for-linus-6.4-rc4-tag' of ↵Gravatar Linus Torvalds 1-3/+5
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fixes from Juergen Gross: - a double free fix in the Xen pvcalls backend driver - a fix for a regression causing the MSI related sysfs entries to not being created in Xen PV guests - a fix in the Xen blkfront driver for handling insane input data better * tag 'for-linus-6.4-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: x86/pci/xen: populate MSI sysfs entries xen/pvcalls-back: fix double frees with pvcalls_new_active_socket() xen/blkfront: Only check REQ_FUA for writes
2023-05-24x86/pci/xen: populate MSI sysfs entriesGravatar Maximilian Heyne 1-3/+5
Commit bf5e758f02fc ("genirq/msi: Simplify sysfs handling") reworked the creation of sysfs entries for MSI IRQs. The creation used to be in msi_domain_alloc_irqs_descs_locked after calling ops->domain_alloc_irqs. Then it moved into __msi_domain_alloc_irqs which is an implementation of domain_alloc_irqs. However, Xen comes with the only other implementation of domain_alloc_irqs and hence doesn't run the sysfs population code anymore. Commit 6c796996ee70 ("x86/pci/xen: Fixup fallout from the PCI/MSI overhaul") set the flag MSI_FLAG_DEV_SYSFS for the xen msi_domain_info but that doesn't actually have an effect because Xen uses it's own domain_alloc_irqs implementation. Fix this by making use of the fallback functions for sysfs population. Fixes: bf5e758f02fc ("genirq/msi: Simplify sysfs handling") Signed-off-by: Maximilian Heyne <mheyne@amazon.de> Reviewed-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/20230503131656.15928-1-mheyne@amazon.de Signed-off-by: Juergen Gross <jgross@suse.com>
2023-05-18x86/pci: Mark local functions as 'static'Gravatar Arnd Bergmann 1-2/+2
Two functions in this file are global but have no prototype in a header and are not called from elsewhere, so they should be static: arch/x86/pci/ce4100.c:86:6: error: no previous prototype for 'sata_revid_init' [-Werror=missing-prototypes] arch/x86/pci/ce4100.c:175:5: error: no previous prototype for 'bridge_read' [-Werror=missing-prototypes] Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com> Link: https://lore.kernel.org/all/20230516193549.544673-3-arnd%40kernel.org
2023-04-27Merge tag 'pci-v6.4-changes' of ↵Gravatar Linus Torvalds 1-0/+59
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci Pull pci updates from Bjorn Helgaas: "Resource management: - Add pci_dev_for_each_resource() and pci_bus_for_each_resource() iterators PCIe native device hotplug: - Fix AB-BA deadlock between reset_lock and device_lock Power management: - Wait longer for devices to become ready after resume (as we do for reset) to accommodate Intel Titan Ridge xHCI devices - Extend D3hot delay for NVIDIA HDA controllers to avoid unrecoverable devices after a bus reset Error handling: - Clear PCIe Device Status after EDR since generic error recovery now only clears it when AER is native ASPM: - Work around Chromebook firmware defect that clobbers Capability list (including ASPM L1 PM Substates Cap) when returning from D3cold to D0 Freescale i.MX6 PCIe controller driver: - Install imprecise external abort handler only when DT indicates PCIe support Freescale Layerscape PCIe controller driver: - Add ls1028a endpoint mode support Qualcomm PCIe controller driver: - Add SM8550 DT binding and driver support - Add SDX55 DT binding and driver support - Use bulk APIs for clocks of IP 1.0.0, 2.3.2, 2.3.3 - Use bulk APIs for reset of IP 2.1.0, 2.3.3, 2.4.0 - Add DT "mhi" register region for supported SoCs - Expose link transition counts via debugfs to help debug low power issues - Support system suspend and resume; reduce interconnect bandwidth and turn off clock and PHY if there are no active devices - Enable async probe by default to reduce boot time Miscellaneous: - Sort controller Kconfig entries by vendor" * tag 'pci-v6.4-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (56 commits) PCI: xilinx: Drop obsolete dependency on COMPILE_TEST PCI: mobiveil: Sort Kconfig entries by vendor PCI: dwc: Sort Kconfig entries by vendor PCI: Sort controller Kconfig entries by vendor PCI: Use consistent controller Kconfig menu entry language PCI: xilinx-nwl: Add 'Xilinx' to Kconfig prompt PCI: hv: Add 'Microsoft' to Kconfig prompt PCI: meson: Add 'Amlogic' to Kconfig prompt PCI: Use of_property_present() for testing DT property presence PCI/PM: Extend D3hot delay for NVIDIA HDA controllers dt-bindings: PCI: qcom: Document msi-map and msi-map-mask properties PCI: qcom: Add SM8550 PCIe support dt-bindings: PCI: qcom: Add SM8550 compatible PCI: qcom: Add support for SDX55 SoC dt-bindings: PCI: qcom-ep: Fix the unit address used in example dt-bindings: PCI: qcom: Add SDX55 SoC dt-bindings: PCI: qcom: Update maintainers entry PCI: qcom: Enable async probe by default PCI: qcom: Add support for system suspend and resume PCI/PM: Drop pci_bridge_wait_for_secondary_bus() timeout parameter ...
2023-04-11PCI: Fix up L1SS capability for Intel Apollo Lake Root PortGravatar Ron Lee 1-0/+59
On Google Coral and Reef family Chromebooks with Intel Apollo Lake SoC, firmware clobbers the header of the L1 PM Substates capability and the previous capability when returning from D3cold to D0. Save those headers at enumeration-time and restore them at resume. [bhelgaas: The main benefit is to make the lspci output after resume correct. Apparently there's little or no effect on power consumption.] Link: https://lore.kernel.org/linux-pci/CAFJ_xbq0cxcH-cgpXLU4Mjk30+muWyWm1aUZGK7iG53yaLBaQg@mail.gmail.com/T/#u Link: https://lore.kernel.org/r/20230411160213.4453-1-ron.lee@intel.com Signed-off-by: Ron Lee <ron.lee@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2023-04-06x86/PCI: Add quirk for AMD XHCI controller that loses MSI-X state in D3hotGravatar Basavaraj Natikar 1-0/+21
The AMD [1022:15b8] USB controller loses some internal functional MSI-X context when transitioning from D0 to D3hot. BIOS normally traps D0->D3hot and D3hot->D0 transitions so it can save and restore that internal context, but some firmware in the field can't do this because it fails to clear the AMD_15B8_RCC_DEV2_EPF0_STRAP2 NO_SOFT_RESET bit. Clear AMD_15B8_RCC_DEV2_EPF0_STRAP2 NO_SOFT_RESET bit before USB controller initialization during boot. Link: https://lore.kernel.org/linux-usb/Y%2Fz9GdHjPyF2rNG3@glanzmann.de/T/#u Link: https://lore.kernel.org/r/20230329172859.699743-1-Basavaraj.Natikar@amd.com Reported-by: Thomas Glanzmann <thomas@glanzmann.de> Tested-by: Thomas Glanzmann <thomas@glanzmann.de> Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Cc: stable@vger.kernel.org
2023-01-16x86/pci/xen: Fixup fallout from the PCI/MSI overhaulGravatar Thomas Gleixner 1-1/+2
David reported that the recent PCI/MSI rework results in MSI descriptor leakage under XEN. This is caused by: 1) The missing MSI_FLAG_FREE_MSI_DESCS flag in the XEN MSI domain info, which is required now that PCI/MSI delegates descriptor freeing to the core MSI code. 2) Not disassociating the interrupts on teardown, by setting the msi_desc::irq to 0. This was not required before because the teardown was unconditional and did not check whether a MSI descriptor was still connected to a Linux interrupt. On further inspection it came to light that the MSI_FLAG_DEV_SYSFS is missing in the XEN MSI domain info as well to restore the pre 6.2 status quo. Add the missing MSI flags and disassociate the MSI descriptor from the Linux interrupt in the XEN specific teardown function. Fixes: b2bdda205c0c ("PCI/MSI: Let the MSI core free descriptors") Fixes: 2f2940d16823 ("genirq/msi: Remove filter from msi_free_descs_free_range()") Fixes: ffd84485e6be ("PCI/MSI: Let the irq code handle sysfs groups") Reported-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: David Woodhouse <dwmw@amazon.co.uk> Link: https://lore.kernel.org/r/871qnunycr.ffs@tglx
2023-01-16x86/pci/xen: Set MSI_FLAG_PCI_MSIX support in Xen MSI domainGravatar David Woodhouse 1-0/+1
The Xen MSI → PIRQ magic does support MSI-X, so advertise it. (In fact it's better off with MSI-X than MSI, because it's actually broken by design for 32-bit MSI, since it puts the high bits of the PIRQ# into the high 32 bits of the MSI message address, instead of the Extended Destination ID field which is in bits 4-11. Strictly speaking, this really fixes a much older commit 2e4386eba0c0 ("x86/xen: Wrap XEN MSI management into irqdomain") which failed to set the flag. But that never really mattered until __pci_enable_msix_range() started to check and bail out early. So in 6.2-rc we see failures e.g. to bring up networking on an Amazon EC2 m4.16xlarge instance: [ 41.498694] ena 0000:00:03.0 (unnamed net_device) (uninitialized): Failed to enable MSI-X. irq_cnt -524 [ 41.498705] ena 0000:00:03.0: Can not reserve msix vectors [ 41.498712] ena 0000:00:03.0: Failed to enable and set the admin interrupts Side note: This is the first bug found, and first patch tested, by running Xen guests under QEMU/KVM instead of running under actual Xen. Fixes: 99f3d2797657 ("PCI/MSI: Reject MSI-X early") Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/4bffa69a949bfdc92c4a18e5a1c3cbb3b94a0d32.camel@infradead.org
2023-01-13x86/pci: Treat EfiMemoryMappedIO as reservation of ECAM spaceGravatar Bjorn Helgaas 1-0/+31
Normally we reject ECAM space unless it is reported as reserved in the E820 table or via a PNP0C02 _CRS method (PCI Firmware, r3.3, sec 4.1.2). 07eab0901ede ("efi/x86: Remove EfiMemoryMappedIO from E820 map"), removes E820 entries that correspond to EfiMemoryMappedIO regions because some other firmware uses EfiMemoryMappedIO for PCI host bridge windows, and the E820 entries prevent Linux from allocating BAR space for hot-added devices. Some firmware doesn't report ECAM space via PNP0C02 _CRS methods, but does mention it as an EfiMemoryMappedIO region via EFI GetMemoryMap(), which is normally converted to an E820 entry by a bootloader or EFI stub. After 07eab0901ede, that E820 entry is removed, so we reject this ECAM space, which makes PCI extended config space (offsets 0x100-0xfff) inaccessible. The lack of extended config space breaks anything that relies on it, including perf, VSEC telemetry, EDAC, QAT, SR-IOV, etc. Allow use of ECAM for extended config space when the region is covered by an EfiMemoryMappedIO region, even if it's not included in E820 or PNP0C02 _CRS. Link: https://lore.kernel.org/r/ac2693d8-8ba3-72e0-5b66-b3ae008d539d@linux.intel.com Link: https://bugzilla.kernel.org/show_bug.cgi?id=216891 Fixes: 07eab0901ede ("efi/x86: Remove EfiMemoryMappedIO from E820 map") Link: https://lore.kernel.org/r/20230110180243.1590045-3-helgaas@kernel.org Reported-by: Kan Liang <kan.liang@linux.intel.com> Reported-by: Tony Luck <tony.luck@intel.com> Reported-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Reported-by: Yunying Sun <yunying.sun@intel.com> Reported-by: Baowen Zheng <baowen.zheng@corigine.com> Reported-by: Zhenzhong Duan <zhenzhong.duan@intel.com> Reported-by: Yang Lixiao <lixiao.yang@intel.com> Tested-by: Tony Luck <tony.luck@intel.com> Tested-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Tested-by: Kan Liang <kan.liang@linux.intel.com> Tested-by: Yunying Sun <yunying.sun@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Rafael J. Wysocki <rafael@kernel.org>
2023-01-11x86/pci: Simplify is_mmconf_reserved() messagesGravatar Bjorn Helgaas 1-6/+7
is_mmconf_reserved() takes a "with_e820" parameter that only determines the message logged if it finds the MMCONFIG region is reserved. Pass the message directly, which will simplify a future patch that adds a new way of looking for that reservation. No functional change intended. Link: https://lore.kernel.org/r/20230110180243.1590045-2-helgaas@kernel.org Tested-by: Tony Luck <tony.luck@intel.com> Tested-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Tested-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com>
2022-12-10x86/PCI: Use pr_info() when possibleGravatar Bjorn Helgaas 1-21/+18
Use pr_info() and similar when possible. No functional change intended. Link: https://lore.kernel.org/r/20221209205131.GA1726524@bhelgaas Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2022-12-10x86/PCI: Fix log message typoGravatar Bjorn Helgaas 1-1/+1
Add missing word in the log message: - ... so future kernels can this automatically + ... so future kernels can do this automatically Suggested-by: Andy Shevchenko <andriy.shevchenko@intel.com> Link: https://lore.kernel.org/r/20221208190341.1560157-5-helgaas@kernel.org Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Hans de Goede <hdegoede@redhat.com>
2022-06-17x86/PCI: Revert "x86/PCI: Clip only host bridge windows for E820 regions"Gravatar Hans de Goede 1-7/+1
This reverts commit 4c5e242d3e93. Prior to 4c5e242d3e93 ("x86/PCI: Clip only host bridge windows for E820 regions"), E820 regions did not affect PCI host bridge windows. We only looked at E820 regions and avoided them when allocating new MMIO space. If firmware PCI bridge window and BAR assignments used E820 regions, we left them alone. After 4c5e242d3e93, we removed E820 regions from the PCI host bridge windows before looking at BARs, so firmware assignments in E820 regions looked like errors, and we moved things around to fit in the space left (if any) after removing the E820 regions. This unnecessary BAR reassignment broke several machines. Guilherme reported that Steam Deck fails to boot after 4c5e242d3e93. We clipped the window that contained most 32-bit BARs: BIOS-e820: [mem 0x00000000a0000000-0x00000000a00fffff] reserved acpi PNP0A08:00: clipped [mem 0x80000000-0xf7ffffff window] to [mem 0xa0100000-0xf7ffffff window] for e820 entry [mem 0xa0000000-0xa00fffff] which forced us to reassign all those BARs, for example, this NVMe BAR: pci 0000:00:01.2: PCI bridge to [bus 01] pci 0000:00:01.2: bridge window [mem 0x80600000-0x806fffff] pci 0000:01:00.0: BAR 0: [mem 0x80600000-0x80603fff 64bit] pci 0000:00:01.2: can't claim window [mem 0x80600000-0x806fffff]: no compatible bridge window pci 0000:01:00.0: can't claim BAR 0 [mem 0x80600000-0x80603fff 64bit]: no compatible bridge window pci 0000:00:01.2: bridge window: assigned [mem 0xa0100000-0xa01fffff] pci 0000:01:00.0: BAR 0: assigned [mem 0xa0100000-0xa0103fff 64bit] All the reassignments were successful, so the devices should have been functional at the new addresses, but some were not. Andy reported a similar failure on an Intel MID platform. Benjamin reported a similar failure on a VMWare Fusion VM. Note: this is not a clean revert; this revert keeps the later change to make the clipping dependent on a new pci_use_e820 bool, moving the checking of this bool to arch_remove_reservations(). [bhelgaas: commit log, add more reporters and testers] BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=216109 Reported-by: Guilherme G. Piccoli <gpiccoli@igalia.com> Reported-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reported-by: Benjamin Coddington <bcodding@redhat.com> Reported-by: Jongman Heo <jongman.heo@gmail.com> Fixes: 4c5e242d3e93 ("x86/PCI: Clip only host bridge windows for E820 regions") Link: https://lore.kernel.org/r/20220612144325.85366-1-hdegoede@redhat.com Tested-by: Guilherme G. Piccoli <gpiccoli@igalia.com> Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Benjamin Coddington <bcodding@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2022-05-27Merge tag 'pci-v5.19-changes' of ↵Gravatar Linus Torvalds 2-0/+101
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull pci updates from Bjorn Helgaas: "Resource management: - Restrict E820 clipping to PCI host bridge windows (Bjorn Helgaas) - Log E820 clipping better (Bjorn Helgaas) - Add kernel cmdline options to enable/disable E820 clipping (Hans de Goede) - Disable E820 reserved region clipping for IdeaPads, Yoga, Yoga Slip, Acer Spin 5, Clevo Barebone systems where clipping leaves no usable address space for touchpads, Thunderbolt devices, etc (Hans de Goede) - Disable E820 clipping by default starting in 2023 (Hans de Goede) PCI device hotplug: - Include files to remove implicit dependencies (Christophe Leroy) - Only put Root Ports in D3 if they can signal and wake from D3 so AMD Yellow Carp doesn't miss hotplug events (Mario Limonciello) Power management: - Define pci_restore_standard_config() only for CONFIG_PM_SLEEP since it's unused otherwise (Krzysztof Kozlowski) - Power up devices completely, including anything platform firmware needs to do, during runtime resume (Rafael J. Wysocki) - Move pci_resume_bus() to PM callbacks so we observe the required bridge power-up delays (Rafael J. Wysocki) - Drop unneeded runtime_d3cold device flag (Rafael J. Wysocki) - Split pci_raw_set_power_state() between pci_power_up() and a new pci_set_low_power_state() (Rafael J. Wysocki) - Set current_state to D3cold if config read returns ~0, indicating the device is not accessible (Rafael J. Wysocki) - Do not call pci_update_current_state() from pci_power_up() so BARs and ASPM config are restored correctly (Rafael J. Wysocki) - Write 0 to PMCSR in pci_power_up() in all cases (Rafael J. Wysocki) - Split pci_power_up() to pci_set_full_power_state() to avoid some redundant operations (Rafael J. Wysocki) - Skip restoring BARs if device is not in D0 (Rafael J. Wysocki) - Rearrange and clarify pci_set_power_state() (Rafael J. Wysocki) - Remove redundant BAR restores from pci_pm_thaw_noirq() (Rafael J. Wysocki) Virtualization: - Acquire device lock before config space access lock to avoid AB/BA deadlock with sriov_numvfs_store() (Yicong Yang) Error handling: - Clear MULTI_ERR_COR/UNCOR_RCV bits, which a race could previously leave permanently set (Kuppuswamy Sathyanarayanan) Peer-to-peer DMA: - Whitelist Intel Skylake-E Root Ports regardless of which devfn they are (Shlomo Pongratz) ASPM: - Override L1 acceptable latency advertised by Intel DG2 so ASPM L1 can be enabled (Mika Westerberg) Cadence PCIe controller driver: - Set up device-specific register to allow PTM Responder to be enabled by the normal architected bit (Christian Gmeiner) - Override advertised FLR support since the controller doesn't implement FLR correctly (Parshuram Thombare) Cadence PCIe endpoint driver: - Correct bitmap size for the ob_region_map of outbound window usage (Dan Carpenter) Freescale i.MX6 PCIe controller driver: - Fix PERST# assertion/deassertion so we observe the required delays before accessing device (Francesco Dolcini) Freescale Layerscape PCIe controller driver: - Add "big-endian" DT property (Hou Zhiqiang) - Update SCFG DT property (Hou Zhiqiang) - Add "aer", "pme", "intr" DT properties (Li Yang) - Add DT compatible strings for ls1028a (Xiaowei Bao) Intel VMD host bridge driver: - Assign VMD IRQ domain before enumeration to avoid IOMMU interrupt remapping errors when MSI-X remapping is disabled (Nirmal Patel) - Revert VMD workaround that kept MSI-X remapping enabled when IOMMU remapping was enabled (Nirmal Patel) Marvell MVEBU PCIe controller driver: - Add of_pci_get_slot_power_limit() to parse the 'slot-power-limit-milliwatt' DT property (Pali Rohár) - Add mvebu support for sending Set_Slot_Power_Limit message (Pali Rohár) MediaTek PCIe controller driver: - Fix refcount leak in mtk_pcie_subsys_powerup() (Miaoqian Lin) MediaTek PCIe Gen3 controller driver: - Reset PHY and MAC at probe time (AngeloGioacchino Del Regno) Microchip PolarFlare PCIe controller driver: - Add chained_irq_enter()/chained_irq_exit() calls to mc_handle_msi() and mc_handle_intx() to avoid lost interrupts (Conor Dooley) - Fix interrupt handling race (Daire McNamara) NVIDIA Tegra194 PCIe controller driver: - Drop tegra194 MSI register save/restore, which is unnecessary since the DWC core does it (Jisheng Zhang) Qualcomm PCIe controller driver: - Add SM8150 SoC DT binding and support (Bhupesh Sharma) - Fix pipe clock imbalance (Johan Hovold) - Fix runtime PM imbalance on probe errors (Johan Hovold) - Fix PHY init imbalance on probe errors (Johan Hovold) - Convert DT binding to YAML (Dmitry Baryshkov) - Update DT binding to show that resets aren't required for MSM8996/APQ8096 platforms (Dmitry Baryshkov) - Add explicit register names per chipset in DT binding (Dmitry Baryshkov) - Add sc7280-specific clock and reset definitions to DT binding (Dmitry Baryshkov) Rockchip PCIe controller driver: - Fix bitmap size when searching for free outbound region (Dan Carpenter) Rockchip DesignWare PCIe controller driver: - Remove "snps,dw-pcie" from rockchip-dwc DT "compatible" property because it's not fully compatible with rockchip (Peter Geis) - Reset rockchip-dwc controller at probe (Peter Geis) - Add rockchip-dwc INTx support (Peter Geis) Synopsys DesignWare PCIe controller driver: - Return error instead of success if DMA mapping of MSI area fails (Jiantao Zhang) Miscellaneous: - Change pci_set_dma_mask() documentation references to dma_set_mask() (Alex Williamson)" * tag 'pci-v5.19-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (64 commits) dt-bindings: PCI: qcom: Add schema for sc7280 chipset dt-bindings: PCI: qcom: Specify reg-names explicitly dt-bindings: PCI: qcom: Do not require resets on msm8996 platforms dt-bindings: PCI: qcom: Convert to YAML PCI: qcom: Fix unbalanced PHY init on probe errors PCI: qcom: Fix runtime PM imbalance on probe errors PCI: qcom: Fix pipe clock imbalance PCI: qcom: Add SM8150 SoC support dt-bindings: pci: qcom: Document PCIe bindings for SM8150 SoC x86/PCI: Disable E820 reserved region clipping starting in 2023 x86/PCI: Disable E820 reserved region clipping via quirks x86/PCI: Add kernel cmdline options to use/ignore E820 reserved regions PCI: microchip: Fix potential race in interrupt handling PCI/AER: Clear MULTI_ERR_COR/UNCOR_RCV bits PCI: cadence: Clear FLR in device capabilities register PCI: cadence: Allow PTM Responder to be enabled PCI: vmd: Revert 2565e5b69c44 ("PCI: vmd: Do not disable MSI-X remapping if interrupt remapping is enabled by IOMMU.") PCI: vmd: Assign VMD IRQ domain before enumeration PCI: Avoid pci_dev_lock() AB/BA deadlock with sriov_numvfs_store() PCI: rockchip-dwc: Add legacy interrupt support ...
2022-05-25Merge tag 'dma-mapping-5.19-2022-05-25' of ↵Gravatar Linus Torvalds 1-1/+1
git://git.infradead.org/users/hch/dma-mapping Pull dma-mapping updates from Christoph Hellwig: - don't over-decrypt memory (Robin Murphy) - takes min align mask into account for the swiotlb max mapping size (Tianyu Lan) - use GFP_ATOMIC in dma-debug (Mikulas Patocka) - fix DMA_ATTR_NO_KERNEL_MAPPING on xen/arm (me) - don't fail on highmem CMA pages in dma_direct_alloc_pages (me) - cleanup swiotlb initialization and share more code with swiotlb-xen (me, Stefano Stabellini) * tag 'dma-mapping-5.19-2022-05-25' of git://git.infradead.org/users/hch/dma-mapping: (23 commits) dma-direct: don't over-decrypt memory swiotlb: max mapping size takes min align mask into account swiotlb: use the right nslabs-derived sizes in swiotlb_init_late swiotlb: use the right nslabs value in swiotlb_init_remap swiotlb: don't panic when the swiotlb buffer can't be allocated dma-debug: change allocation mode from GFP_NOWAIT to GFP_ATIOMIC dma-direct: don't fail on highmem CMA pages in dma_direct_alloc_pages swiotlb-xen: fix DMA_ATTR_NO_KERNEL_MAPPING on arm x86: remove cruft from <asm/dma-mapping.h> swiotlb: remove swiotlb_init_with_tbl and swiotlb_init_late_with_tbl swiotlb: merge swiotlb-xen initialization into swiotlb swiotlb: provide swiotlb_init variants that remap the buffer swiotlb: pass a gfp_mask argument to swiotlb_init_late swiotlb: add a SWIOTLB_ANY flag to lift the low memory restriction swiotlb: make the swiotlb_init interface more useful x86: centralize setting SWIOTLB_FORCE when guest memory encryption is enabled x86: remove the IOMMU table infrastructure MIPS/octeon: use swiotlb_init instead of open coding it arm/xen: don't check for xen_initial_domain() in xen_create_contiguous_region swiotlb: rename swiotlb_late_init_with_default_size ...
2022-05-23Merge tag 'x86-irq-2022-05-23' of ↵Gravatar Linus Torvalds 1-64/+313
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 PCI irq routing updates from Thomas Gleixner: - Cleanup and robustify the PCI interrupt routing table handling including proper range checks - Add support for Intel 82378ZB/82379AB, SiS85C497 PIRQ routers - Fix the ALi M1487 router handling - Handle the IRT routing table format in AMI BIOSes correctly * tag 'x86-irq-2022-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/PCI: Fix coding style in PIRQ table verification x86/PCI: Fix ALi M1487 (IBC) PIRQ router link value interpretation x86/PCI: Add $IRT PIRQ routing table support x86/PCI: Handle PIRQ routing tables with no router device given x86/PCI: Add PIRQ routing table range checks x86/PCI: Add support for the SiS85C497 PIRQ router x86/PCI: Disambiguate SiS85C503 PIRQ router code entities x86/PCI: Handle IRQ swizzling with PIRQ routers x86/PCI: Also match function number in $PIR table x86/PCI: Include function number in $PIR table dump x86/PCI: Show the physical address of the $PIR table
2022-05-19x86/PCI: Disable E820 reserved region clipping starting in 2023Gravatar Hans de Goede 1-0/+21
Some firmware includes unusable space (host bridge registers, hidden PCI device BARs, etc) in PCI host bridge _CRS. As far as we know, there's nothing in the ACPI, UEFI, or PCI Firmware spec that requires the OS to remove E820 reserved regions from _CRS, so this seems like a firmware defect. As a workaround, 4dc2287c1805 ("x86: avoid E820 regions when allocating address space") has clipped out the unusable space in the past. This is required for machines like the following: - Dell Precision T3500 (the original motivator for 4dc2287c1805); see https://bugzilla.kernel.org/show_bug.cgi?id=16228 - Asus C523NA (Coral) Chromebook; see https://lore.kernel.org/all/4e9fca2f-0af1-3684-6c97-4c35befd5019@redhat.com/ - Lenovo ThinkPad X1 Gen 2; see: https://bugzilla.redhat.com/show_bug.cgi?id=2029207 But other firmware supplies E820 reserved regions that cover entire _CRS windows, and clipping throws away the entire window, leaving none for hot-added or uninitialized devices. This clipping breaks a whole range of Lenovo IdeaPads, Yogas, Yoga Slims, and notebooks, as well as Acer Spin 5 and Clevo X170KM-G Barebone machines. E820 reserved entries that cover a memory-mapped PCI host bridge, including its registers and memory/IO windows, are probably *not* a firmware defect. Per ACPI v5.4, sec 15.2, the E820 memory map may include: Address ranges defined for baseboard memory-mapped I/O devices, such as APICs, are returned as reserved. Disable the E820 clipping by default for all post-2022 machines. We already have quirks to disable clipping for pre-2023 machines, and we'll likely need quirks to *enable* clipping for post-2022 machines that incorrectly include unusable space in _CRS, including Chromebooks and Lenovo ThinkPads. Here's the rationale for doing this. If we do nothing, and continue clipping by default: - Future systems like the Lenovo IdeaPads, Yogas, etc, Acer Spin, and Clevo Barebones will require new quirks to disable clipping. - The problem here is E820 entries that cover entire _CRS windows that should not be clipped out. - I think these E820 entries are legal per spec, and it would be hard to get BIOS vendors to change them. - We will discover new systems that need clipping disabled piecemeal as they are released. - Future systems like Lenovo X1 Carbon and the Chromebooks (probably anything using coreboot) will just work, even though their _CRS is incorrect, so we will not notice new ones that rely on the clipping. - BIOS updates will not require new quirks unless they change the DMI model string. If we add the date check in this commit that disables clipping, e.g., "no clipping when date >= 2023": - Future systems like Lenovo *IIL*, Acer Spin, and Clevo Barebones will just work without new quirks. - Future systems like Lenovo X1 Carbon and the Chromebooks will require new quirks to *enable* clipping. - The problem here is that _CRS contains regions that are not usable by PCI devices, and we rely on the E820 kludge to clip them out. - I think this use of E820 is clearly a firmware bug, so we have a fighting chance of getting it changed eventually. - BIOS updates after the cutoff date *will* require quirks, but only for systems like Lenovo X1 Carbon and Chromebooks that we already think have broken firmware. It seems to me like it's better to add quirks for firmware that we think is broken than for firmware that seems unusual but correct. [bhelgaas: comment and commit log] Link: https://lore.kernel.org/linux-pci/20220518220754.GA7911@bhelgaas/ Link: https://lore.kernel.org/r/20220519152150.6135-4-hdegoede@redhat.com Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Benoit Grégoire <benoitg@coeus.ca> Cc: Hui Wang <hui.wang@canonical.com>
2022-05-19x86/PCI: Disable E820 reserved region clipping via quirksGravatar Hans de Goede 1-0/+53
To avoid unusable space that some firmware includes in PCI host bridge _CRS, Linux currently excludes E820 reserved regions from _CRS windows; see 4dc2287c1805 ("x86: avoid E820 regions when allocating address space"). However, some systems supply E820 reserved regions that cover the entire memory window from _CRS, so clipping them out leaves no space for hot-added or uninitialized PCI devices. For example, from a Lenovo IdeaPad 3 15IIL 81WE: BIOS-e820: [mem 0x4bc50000-0xcfffffff] reserved pci_bus 0000:00: root bus resource [mem 0x65400000-0xbfffffff window] pci 0000:00:15.0: BAR 0: [mem 0x00000000-0x00000fff 64bit] pci 0000:00:15.0: BAR 0: no space for [mem size 0x00001000 64bit] Add quirks to disable the E820 clipping for machines known to do this. A single DMI_PRODUCT_VERSION "IIL" quirk matches all the below: Lenovo IdeaPad 3 14IIL05 Lenovo IdeaPad 3 15IIL05 Lenovo IdeaPad 3 17IIL05 Lenovo IdeaPad 5 14IIL05 Lenovo IdeaPad 5 15IIL05 Lenovo IdeaPad Slim 7 14IIL05 Lenovo IdeaPad Slim 7 15IIL05 Lenovo IdeaPad S145-15IIL Lenovo IdeaPad S340-14IIL Lenovo IdeaPad S340-15IIL Lenovo IdeaPad C340-15IIL Lenovo BS145-15IIL Lenovo V14-IIL Lenovo V15-IIL Lenovo V17-IIL Lenovo Yoga C940-14IIL Lenovo Yoga S740-14IIL Lenovo Yoga Slim 7 14IIL05 Lenovo Yoga Slim 7 15IIL05 in addition to the following that don't actually need it because they have no E820 reserved regions that overlap _CRS windows: Lenovo IdeaPad Flex 5 14IIL05 Lenovo IdeaPad Flex 5 15IIL05 Lenovo ThinkBook 14-IIL Lenovo ThinkBook 15-IIL Lenovo Yoga S940-14IIL Other quirks match these: Acer Spin 5 (SP513-54N) Clevo X170KM-G Barebone Link: https://bugzilla.kernel.org/show_bug.cgi?id=206459 Lenovo Yoga C940-14IIL Link: https://bugzilla.kernel.org/show_bug.cgi?id=214259 Clevo X170KM Barebone Link: https://bugzilla.redhat.com/show_bug.cgi?id=1868899 Lenovo IdeaPad 3 15IIL05 Link: https://bugzilla.redhat.com/show_bug.cgi?id=1871793 Lenovo IdeaPad 5 14IIL05 Link: https://bugs.launchpad.net/bugs/1878279 Lenovo IdeaPad 5 14IIL05 Link: https://bugs.launchpad.net/bugs/1880172 Lenovo IdeaPad 3 14IIL05 Link: https://bugs.launchpad.net/bugs/1884232 Acer Spin SP513-54N Link: https://bugs.launchpad.net/bugs/1921649 Lenovo IdeaPad S145 Link: https://bugs.launchpad.net/bugs/1931715 Lenovo IdeaPad S145 Link: https://bugs.launchpad.net/bugs/1932069 Lenovo BS145-15IIL Link: https://lore.kernel.org/r/20220519152150.6135-3-hdegoede@redhat.com Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Benoit Grégoire <benoitg@coeus.ca> Cc: Hui Wang <hui.wang@canonical.com>
2022-05-19x86/PCI: Add kernel cmdline options to use/ignore E820 reserved regionsGravatar Hans de Goede 2-2/+24
Some firmware supplies PCI host bridge _CRS that includes address space unusable by PCI devices, e.g., space occupied by host bridge registers or used by hidden PCI devices. To avoid this unusable space, Linux currently excludes E820 reserved regions from _CRS windows; see 4dc2287c1805 ("x86: avoid E820 regions when allocating address space"). However, this use of E820 reserved regions to clip things out of _CRS is not supported by ACPI, UEFI, or PCI Firmware specs, and some systems have E820 reserved regions that cover the entire memory window from _CRS. 4dc2287c1805 clips the entire window, leaving no space for hot-added or uninitialized PCI devices. For example, from a Lenovo IdeaPad 3 15IIL 81WE: BIOS-e820: [mem 0x4bc50000-0xcfffffff] reserved pci_bus 0000:00: root bus resource [mem 0x65400000-0xbfffffff window] pci 0000:00:15.0: BAR 0: [mem 0x00000000-0x00000fff 64bit] pci 0000:00:15.0: BAR 0: no space for [mem size 0x00001000 64bit] Future patches will add quirks to enable/disable E820 clipping automatically. Add a "pci=no_e820" kernel command line option to disable clipping with E820 reserved regions. Also add a matching "pci=use_e820" option to enable clipping with E820 reserved regions if that has been disabled by default by further patches in this patch-set. Both options taint the kernel because they are intended for debugging and workaround purposes until a quirk can set them automatically. [bhelgaas: commit log, add printk] Link: https://bugzilla.redhat.com/show_bug.cgi?id=1868899 Lenovo IdeaPad 3 Link: https://lore.kernel.org/r/20220519152150.6135-2-hdegoede@redhat.com Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Benoit Grégoire <benoitg@coeus.ca> Cc: Hui Wang <hui.wang@canonical.com>
2022-04-29x86/pci/xen: Disable PCI/MSI[-X] masking for XEN_HVM guestsGravatar Thomas Gleixner 1-1/+5
When a XEN_HVM guest uses the XEN PIRQ/Eventchannel mechanism, then PCI/MSI[-X] masking is solely controlled by the hypervisor, but contrary to XEN_PV guests this does not disable PCI/MSI[-X] masking in the PCI/MSI layer. This can lead to a situation where the PCI/MSI layer masks an MSI[-X] interrupt and the hypervisor grants the write despite the fact that it already requested the interrupt. As a consequence interrupt delivery on the affected device is not happening ever. Set pci_msi_ignore_mask to prevent that like it's done for XEN_PV guests already. Fixes: 809f9267bbab ("xen: map MSIs into pirqs") Reported-by: Jeremi Piotrowski <jpiotrowski@linux.microsoft.com> Reported-by: Dusty Mabe <dustymabe@redhat.com> Reported-by: Salvatore Bonaccorso <carnil@debian.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Noah Meyerhans <noahm@debian.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/87tuaduxj5.ffs@tglx
2022-04-18swiotlb: provide swiotlb_init variants that remap the bufferGravatar Christoph Hellwig 1-1/+1
To shared more code between swiotlb and xen-swiotlb, offer a swiotlb_init_remap interface and add a remap callback to swiotlb_init_late that will allow Xen to remap the buffer without duplicating much of the logic. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2022-04-18swiotlb: pass a gfp_mask argument to swiotlb_init_lateGravatar Christoph Hellwig 1-1/+1
Let the caller chose a zone to allocate from. This will be used later on by the xen-swiotlb initialization on arm. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2022-04-18swiotlb: rename swiotlb_late_init_with_default_sizeGravatar Christoph Hellwig 1-1/+1
swiotlb_late_init_with_default_size is an overly verbose name that doesn't even catch what the function is doing, given that the size is not just a default but the actual requested size. Rename it to swiotlb_init_late. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2022-04-10x86/PCI: Fix coding style in PIRQ table verificationGravatar Maciej W. Rozycki 1-1/+1
Remove an extraneous space with a cast in `pirq_check_routing_table'. Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/alpine.DEB.2.21.2203310017260.44113@angie.orcam.me.uk
2022-04-10x86/PCI: Fix ALi M1487 (IBC) PIRQ router link value interpretationGravatar Maciej W. Rozycki 1-3/+16
Fix an issue with commit 1ce849c75534 ("x86/PCI: Add support for the ALi M1487 (IBC) PIRQ router") and correct ALi M1487 (IBC) PIRQ router link value (`pirq' cookie) interpretation according to findings in the BIOS. Credit to Nikolai Zhubr for the detective work as to the bit layout. Fixes: 1ce849c75534 ("x86/PCI: Add support for the ALi M1487 (IBC) PIRQ router") Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/alpine.DEB.2.21.2203310013270.44113@angie.orcam.me.uk
2022-04-10x86/PCI: Add $IRT PIRQ routing table supportGravatar Maciej W. Rozycki 1-0/+76
Handle the $IRT PCI IRQ Routing Table format used by AMI for its BCP (BIOS Configuration Program) external tool meant for tweaking BIOS structures without the need to rebuild it from sources[1]. The $IRT format has been invented by AMI before Microsoft has come up with its $PIR format and a $IRT table is therefore there in some systems that lack a $PIR table, such as the DataExpert EXP8449 mainboard based on the ALi FinALi 486 chipset (M1489/M1487), which predates DMI 2.0 and cannot therefore be easily identified at run time. Unlike with the $PIR format there is no alignment guarantee as to the placement of the $IRT table, so scan the whole BIOS area bytewise. Credit to Michal Necasek for helping me chase documentation for the format. References: [1] "What is BCP? - AMI", <https://www.ami.com/what-is-bcp/> Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> # crosvm Link: https://lore.kernel.org/r/alpine.DEB.2.21.2203302228410.9038@angie.orcam.me.uk
2022-04-10x86/PCI: Handle PIRQ routing tables with no router device givenGravatar Maciej W. Rozycki 1-20/+44
PIRQ routing tables provided by the PCI BIOS usually specify the PCI vendor:device ID as well as the bus address of the device implementing the PIRQ router, e.g.: PCI: Interrupt Routing Table found at 0xc00fde10 [...] PCI: Attempting to find IRQ router for [8086:7000] pci 0000:00:07.0: PIIX/ICH IRQ router [8086:7000] however in some cases they do not, in which case we fail to match the router handler, e.g.: PCI: Interrupt Routing Table found at 0xc00fdae0 [...] PCI: Attempting to find IRQ router for [0000:0000] PCI: Interrupt router not found at 00:00 This is because we always match the vendor:device ID and the bus address literally, even if they are all zeros. Handle this case then and iterate over all PCI devices until we find a matching router handler if the vendor ID given by the routing table is the invalid value of zero: PCI: Attempting to find IRQ router for [0000:0000] PCI: Trying IRQ router for [1039:0496] pci 0000:00:05.0: SiS85C497 IRQ router [1039:0496] Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Nikolai Zhubr <zhubr.2@gmail.com> Link: https://lore.kernel.org/r/alpine.DEB.2.21.2203302018570.9038@angie.orcam.me.uk
2022-04-10x86/PCI: Add PIRQ routing table range checksGravatar Maciej W. Rozycki 1-5/+12
Verify that the PCI IRQ Routing Table header as well as individual slot entries are all wholly contained within the BIOS memory area. Do not even call the checksum calculator if the header would overrun the area and then bail out early if any slot would. Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/alpine.DEB.2.21.2203301735510.22465@angie.orcam.me.uk
2022-04-10x86/PCI: Add support for the SiS85C497 PIRQ routerGravatar Maciej W. Rozycki 1-0/+80
The SiS 85C496/497 486 Green PC VESA/ISA/PCI Chipset has support for PCI steering and the ELCR register implemented. These features are handled by the SiS85C497 AT Bus Controller & Megacell (ATM) ISA bridge, however the device is wired as a peer bridge directly to the host bus and has its PCI configuration registers decoded at addresses 0x80-0xff by the accompanying SiS85C496 PCI & CPU Memory Controller (PCM) host bridge[1]. Therefore we need to match on the host bridge's vendor and device ID. Like with the SiS85C503 PIRQ router handle link value ranges of 1-4 and 0xc0-0xc3, corresponding respectively to PIRQ line numbers counted from 1 and link register PCI configuration space addresses. References: [1] "486 Green PC VESA/ISA/PCI Chipset, SiS 85C496/497", Rev 3.0, Silicon Integrated Systems Corp., July 1995, Part IV, Section 3. "PCI Configuration Space Registers (00h ~ FFh)", p. 114 Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Nikolai Zhubr <zhubr.2@gmail.com> Link: https://lore.kernel.org/r/alpine.DEB.2.21.2203301610490.22465@angie.orcam.me.uk
2022-04-10x86/PCI: Disambiguate SiS85C503 PIRQ router code entitiesGravatar Maciej W. Rozycki 1-15/+18
In preparation to adding support for the SiS85C497 PIRQ router add `503' to the names of SiS85C503 PIRQ router code entities so that they clearly indicate which device they refer to. Also restructure `sis_router_probe' such that new device IDs will be just new switch cases. No functional change. Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/alpine.DEB.2.21.2203301610000.22465@angie.orcam.me.uk
2022-04-10x86/PCI: Handle IRQ swizzling with PIRQ routersGravatar Maciej W. Rozycki 1-13/+47
Similarly to MP-tables PIRQ routing tables may not list devices behind PCI-to-PCI bridges, leading to interrupt routing failures, e.g.: pci 0000:00:07.0: PIIX/ICH IRQ router [8086:7000] pci 0000:02:00.0: ignoring bogus IRQ 255 pci 0000:02:01.0: ignoring bogus IRQ 255 pci 0000:02:02.0: ignoring bogus IRQ 255 pci 0000:04:00.0: ignoring bogus IRQ 255 pci 0000:04:00.3: ignoring bogus IRQ 255 pci 0000:00:11.0: PCI INT A -> PIRQ 63, mask deb8, excl 0c20 pci 0000:00:11.0: PCI INT A -> newirq 0 PCI: setting IRQ 11 as level-triggered pci 0000:00:11.0: found PCI INT A -> IRQ 11 pci 0000:00:11.0: sharing IRQ 11 with 0000:00:07.2 pci 0000:02:00.0: PCI INT A not found in routing table pci 0000:02:01.0: PCI INT A not found in routing table pci 0000:02:02.0: PCI INT A not found in routing table pci 0000:04:00.0: PCI INT A not found in routing table pci 0000:04:00.3: PCI INT D not found in routing table pci 0000:06:05.0: PCI INT A not found in routing table pci 0000:06:08.0: PCI INT A not found in routing table pci 0000:06:08.1: PCI INT B not found in routing table pci 0000:06:08.2: PCI INT C not found in routing table and consequently non-working devices. Since PCI-to-PCI bridges have a standardised way of routing interrupts by the means of swizzling do it for configurations that use a PIRQ router as well, like with APIC-based setups, and use the determined corresponding topmost bridge's interrupt pin assignment to route a given device's interrupt: pci 0000:00:07.0: PIIX/ICH IRQ router [8086:7000] pci 0000:02:00.0: ignoring bogus IRQ 255 pci 0000:02:01.0: ignoring bogus IRQ 255 pci 0000:02:02.0: ignoring bogus IRQ 255 pci 0000:04:00.0: ignoring bogus IRQ 255 pci 0000:04:00.3: ignoring bogus IRQ 255 pci 0000:00:11.0: PCI INT A -> PIRQ 63, mask deb8, excl 0c20 pci 0000:00:11.0: PCI INT A -> newirq 0 PCI: setting IRQ 11 as level-triggered pci 0000:00:11.0: found PCI INT A -> IRQ 11 pci 0000:00:11.0: sharing IRQ 11 with 0000:00:07.2 pci 0000:02:00.0: using bridge 0000:00:11.0 INT A to get INT A pci 0000:00:11.0: sharing IRQ 11 with 0000:02:00.0 pci 0000:02:01.0: using bridge 0000:00:11.0 INT B to get INT A pci 0000:02:02.0: using bridge 0000:00:11.0 INT C to get INT A pci 0000:04:00.0: using bridge 0000:00:11.0 INT B to get INT A pci 0000:04:00.3: using bridge 0000:00:11.0 INT A to get INT D pci 0000:00:11.0: sharing IRQ 11 with 0000:04:00.3 pci 0000:06:05.0: using bridge 0000:00:11.0 INT D to get INT A pci 0000:06:08.0: using bridge 0000:00:11.0 INT C to get INT A pci 0000:06:08.1: using bridge 0000:00:11.0 INT D to get INT B pci 0000:06:08.2: using bridge 0000:00:11.0 INT A to get INT C pci 0000:00:11.0: sharing IRQ 11 with 0000:06:08.2 pci 0000:02:01.0: using bridge 0000:00:11.0 INT B to get INT A pci 0000:02:01.0: PCI INT A -> PIRQ 60, mask deb8, excl 0c20 pci 0000:02:01.0: PCI INT A -> newirq 0 PCI: setting IRQ 10 as level-triggered pci 0000:02:01.0: found PCI INT A -> IRQ 10 pci 0000:02:01.0: sharing IRQ 10 with 0000:00:14.0 pci 0000:02:00.0: using bridge 0000:00:11.0 INT A to get INT A pci 0000:02:01.0: using bridge 0000:00:11.0 INT B to get INT A pci 0000:02:02.0: using bridge 0000:00:11.0 INT C to get INT A pci 0000:04:00.0: using bridge 0000:00:11.0 INT B to get INT A pci 0000:02:01.0: sharing IRQ 10 with 0000:04:00.0 pci 0000:04:00.3: using bridge 0000:00:11.0 INT A to get INT D pci 0000:06:05.0: using bridge 0000:00:11.0 INT D to get INT A pci 0000:06:08.0: using bridge 0000:00:11.0 INT C to get INT A pci 0000:06:08.1: using bridge 0000:00:11.0 INT D to get INT B pci 0000:06:08.2: using bridge 0000:00:11.0 INT A to get INT C pci 0000:02:02.0: using bridge 0000:00:11.0 INT C to get INT A pci 0000:02:02.0: PCI INT A -> PIRQ 61, mask deb8, excl 0c20 pci 0000:02:02.0: PCI INT A -> newirq 0 PCI: setting IRQ 5 as level-triggered pci 0000:02:02.0: found PCI INT A -> IRQ 5 pci 0000:02:02.0: sharing IRQ 5 with 0000:00:13.0 pci 0000:02:00.0: using bridge 0000:00:11.0 INT A to get INT A pci 0000:02:01.0: using bridge 0000:00:11.0 INT B to get INT A pci 0000:02:02.0: using bridge 0000:00:11.0 INT C to get INT A pci 0000:04:00.0: using bridge 0000:00:11.0 INT B to get INT A pci 0000:04:00.3: using bridge 0000:00:11.0 INT A to get INT D pci 0000:06:05.0: using bridge 0000:00:11.0 INT D to get INT A pci 0000:06:08.0: using bridge 0000:00:11.0 INT C to get INT A pci 0000:02:02.0: sharing IRQ 5 with 0000:06:08.0 pci 0000:06:08.1: using bridge 0000:00:11.0 INT D to get INT B pci 0000:06:08.2: using bridge 0000:00:11.0 INT A to get INT C pci 0000:06:05.0: using bridge 0000:00:11.0 INT D to get INT A pci 0000:06:05.0: PCI INT A -> PIRQ 62, mask deb8, excl 0c20 pci 0000:06:05.0: PCI INT A -> newirq 0 pci 0000:06:05.0: found PCI INT A -> IRQ 5 pci 0000:06:05.0: sharing IRQ 5 with 0000:00:12.0 pci 0000:02:00.0: using bridge 0000:00:11.0 INT A to get INT A pci 0000:02:01.0: using bridge 0000:00:11.0 INT B to get INT A pci 0000:02:02.0: using bridge 0000:00:11.0 INT C to get INT A pci 0000:04:00.0: using bridge 0000:00:11.0 INT B to get INT A pci 0000:04:00.3: using bridge 0000:00:11.0 INT A to get INT D pci 0000:06:05.0: using bridge 0000:00:11.0 INT D to get INT A pci 0000:06:08.0: using bridge 0000:00:11.0 INT C to get INT A pci 0000:06:08.1: using bridge 0000:00:11.0 INT D to get INT B pci 0000:06:05.0: sharing IRQ 5 with 0000:06:08.1 pci 0000:06:08.2: using bridge 0000:00:11.0 INT A to get INT C Adjust log messages accordingly. Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/alpine.DEB.2.21.2203301538440.22465@angie.orcam.me.uk
2022-04-10x86/PCI: Also match function number in $PIR tableGravatar Maciej W. Rozycki 1-4/+15
Contrary to the PCI BIOS specification[1] some systems include the PCI function number for onboard devices in their $PIR table. Consequently the wrong entry can be matched leading to interrupt routing failures. For example the Tyan Tomcat IV S1564D board has: 00:07.1 slot=00 0:00/deb8 1:00/deb8 2:00/deb8 3:00/deb8 00:07.2 slot=00 0:00/deb8 1:00/deb8 2:00/deb8 3:63/deb8 for its IDE interface and USB controller functions of the 82371SB PIIX3 southbridge. Consequently the first entry matches causing the inability to route the USB interrupt in the `noapic' mode, in which case we need to rely on the interrupt line set by the BIOS: uhci_hcd 0000:00:07.2: runtime IRQ mapping not provided by arch uhci_hcd 0000:00:07.2: PCI INT D not routed uhci_hcd 0000:00:07.2: enabling bus mastering uhci_hcd 0000:00:07.2: UHCI Host Controller uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:07.2: irq 11, io base 0x00006000 Try to match the PCI device and function combined then and if that fails move on to PCI device matching only. Compliant systems will only have a single $PIR table entry per PCI device, so this update does not change the semantics with them, while systems that have several entries for individual functions of a single PCI device each will match the correct entry: uhci_hcd 0000:00:07.2: runtime IRQ mapping not provided by arch uhci_hcd 0000:00:07.2: PCI INT D -> PIRQ 63, mask deb8, excl 0c20 uhci_hcd 0000:00:07.2: PCI INT D -> newirq 11 uhci_hcd 0000:00:07.2: found PCI INT D -> IRQ 11 uhci_hcd 0000:00:07.2: sharing IRQ 11 with 0000:00:11.0 uhci_hcd 0000:00:07.2: enabling bus mastering uhci_hcd 0000:00:07.2: UHCI Host Controller uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:07.2: irq 11, io base 0x00006000 [1] "PCI BIOS Specification", Revision 2.1, PCI Special Interest Group, August 26, 1994, Table 4-1 "Layout of IRQ routing table entry.", p. 12 Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/alpine.DEB.2.21.2203301536020.22465@angie.orcam.me.uk
2022-04-10x86/PCI: Include function number in $PIR table dumpGravatar Maciej W. Rozycki 1-1/+2
Contrary to the PCI BIOS specification[1] some systems include the PCI function number for motherboard devices in their $PIR table, e.g. this is what the Tyan Tomcat IV S1564D board reports: 00:14 slot=01 0:60/deb8 1:61/deb8 2:62/deb8 3:63/deb8 00:13 slot=02 0:61/deb8 1:62/deb8 2:63/deb8 3:60/deb8 00:12 slot=03 0:62/deb8 1:63/deb8 2:60/deb8 3:61/deb8 00:11 slot=04 0:63/deb8 1:60/deb8 2:61/deb8 3:62/deb8 00:07 slot=00 0:00/deb8 1:00/deb8 2:00/deb8 3:00/deb8 00:07 slot=00 0:00/deb8 1:00/deb8 2:00/deb8 3:63/deb8 Print the function number then in the debug $PIR table dump: 00:14.0 slot=01 0:60/deb8 1:61/deb8 2:62/deb8 3:63/deb8 00:13.0 slot=02 0:61/deb8 1:62/deb8 2:63/deb8 3:60/deb8 00:12.0 slot=03 0:62/deb8 1:63/deb8 2:60/deb8 3:61/deb8 00:11.0 slot=04 0:63/deb8 1:60/deb8 2:61/deb8 3:62/deb8 00:07.1 slot=00 0:00/deb8 1:00/deb8 2:00/deb8 3:00/deb8 00:07.2 slot=00 0:00/deb8 1:00/deb8 2:00/deb8 3:63/deb8 References: [1] "PCI BIOS Specification", Revision 2.1, PCI Special Interest Group, August 26, 1994, Table 4-1 "Layout of IRQ routing table entry.", p. 12 Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/alpine.DEB.2.21.2203301534440.22465@angie.orcam.me.uk
2022-04-10x86/PCI: Show the physical address of the $PIR tableGravatar Maciej W. Rozycki 1-2/+2
It makes no sense to hide the address of the $PIR table in a debug dump: PCI: Interrupt Routing Table found at 0x(ptrval) let alone print its virtual address, given that this is a BIOS entity at a fixed location in the system's memory map. Show the physical address instead then, e.g.: PCI: Interrupt Routing Table found at 0xfde10 Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/alpine.DEB.2.21.2203301532330.22465@angie.orcam.me.uk
2022-04-08x86/PCI: Clip only host bridge windows for E820 regionsGravatar Bjorn Helgaas 1-0/+5
ACPI firmware advertises PCI host bridge resources via PNP0A03 _CRS methods. Some BIOSes include non-window address space in _CRS, and if we allocate that non-window space for PCI devices, they don't work. 4dc2287c1805 ("x86: avoid E820 regions when allocating address space") works around this issue by clipping out any regions mentioned in the E820 table in the allocate_resource() path, but the implementation has a couple issues: - The clipping is done for *all* allocations, not just those for PCI address space, and - The clipping is done at each allocation instead of being done once when setting up the host bridge windows. Rework the implementation so we only clip PCI host bridge windows, and we do it once when setting them up. Example output changes: BIOS-e820: [mem 0x00000000b0000000-0x00000000c00fffff] reserved + acpi PNP0A08:00: clipped [mem 0xc0000000-0xfebfffff window] to [mem 0xc0100000-0xfebfffff window] for e820 entry [mem 0xb0000000-0xc00fffff] - pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window] + pci_bus 0000:00: root bus resource [mem 0xc0100000-0xfebfffff window] Link: https://lore.kernel.org/r/20220304035110.988712-3-helgaas@kernel.org Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-01-26PCI/sysfs: Find shadow ROM before static attribute initializationGravatar Bjorn Helgaas 1-2/+2
Ville reported that the sysfs "rom" file for VGA devices disappeared after 527139d738d7 ("PCI/sysfs: Convert "rom" to static attribute"). Prior to 527139d738d7, FINAL fixups, including pci_fixup_video() where we find shadow ROMs, were run before pci_create_sysfs_dev_files() created the sysfs "rom" file. After 527139d738d7, "rom" is a static attribute and is created before FINAL fixups are run, so we didn't create "rom" files for shadow ROMs: acpi_pci_root_add ... pci_scan_single_device pci_device_add pci_fixup_video # <-- new HEADER fixup device_add ... if (grp->is_visible()) pci_dev_rom_attr_is_visible # after 527139d738d7 pci_bus_add_devices pci_bus_add_device pci_fixup_device(pci_fixup_final) pci_fixup_video # <-- previous FINAL fixup pci_create_sysfs_dev_files if (pci_resource_len(pdev, PCI_ROM_RESOURCE)) sysfs_create_bin_file("rom") # before 527139d738d7 Change pci_fixup_video() to be a HEADER fixup so it runs before sysfs static attributes are initialized. Rename the Loongson pci_fixup_radeon() to pci_fixup_video() and make its dmesg logging identical to the others since it is doing the same job. Link: https://lore.kernel.org/r/YbxqIyrkv3GhZVxx@intel.com Fixes: 527139d738d7 ("PCI/sysfs: Convert "rom" to static attribute") Link: https://lore.kernel.org/r/20220126154001.16895-1-helgaas@kernel.org Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org # v5.13+ Cc: Huacai Chen <chenhuacai@kernel.org> Cc: Jiaxun Yang <jiaxun.yang@flygoat.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Krzysztof Wilczyński <kw@linux.com>
2022-01-16Merge tag 'pci-v5.17-changes' of ↵Gravatar Linus Torvalds 1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull pci updates from Bjorn Helgaas: "Enumeration: - Use pci_find_vsec_capability() instead of open-coding it (Andy Shevchenko) - Convert pci_dev_present() stub from macro to static inline to avoid 'unused variable' errors (Hans de Goede) - Convert sysfs slot attributes from default_attrs to default_groups (Greg Kroah-Hartman) - Use DWORD accesses for LTR, L1 SS to avoid BayHub OZ711LV2 erratum (Rajat Jain) - Remove unnecessary initialization of static variables (Longji Guo) Resource management: - Always write Intel I210 ROM BAR on update to work around device defect (Bjorn Helgaas) PCIe native device hotplug: - Fix pciehp lockdep errors on Thunderbolt undock (Hans de Goede) - Fix infinite loop in pciehp IRQ handler on power fault (Lukas Wunner) Power management: - Convert amd64-agp, sis-agp, via-agp from legacy PCI power management to generic power management (Vaibhav Gupta) IOMMU: - Add function 1 DMA alias quirk for Marvell 88SE9125 SATA controller so it can work with an IOMMU (Yifeng Li) Error handling: - Add PCI_ERROR_RESPONSE and related definitions for signaling and checking for transaction errors on PCI (Naveen Naidu) - Fabricate PCI_ERROR_RESPONSE data (~0) in config read wrappers, instead of in host controller drivers, when transactions fail on PCI (Naveen Naidu) - Use PCI_POSSIBLE_ERROR() to check for possible failure of config reads (Naveen Naidu) Peer-to-peer DMA: - Add Logan Gunthorpe as P2PDMA maintainer (Bjorn Helgaas) ASPM: - Calculate link L0s and L1 exit latencies when needed instead of caching them (Saheed O. Bolarinwa) - Calculate device L0s and L1 acceptable exit latencies when needed instead of caching them (Saheed O. Bolarinwa) - Remove struct aspm_latency since it's no longer needed (Saheed O. Bolarinwa) APM X-Gene PCIe controller driver: - Fix IB window setup, which was broken by the fact that IB resources are now sorted in address order instead of DT dma-ranges order (Rob Herring) Apple PCIe controller driver: - Enable clock gating to save power (Hector Martin) - Fix REFCLK1 enable/poll logic (Hector Martin) Broadcom STB PCIe controller driver: - Declare bitmap correctly for use by bitmap interfaces (Christophe JAILLET) - Clean up computation of legacy and non-legacy MSI bitmasks (Florian Fainelli) - Update suspend/resume/remove error handling to warn about errors and not fail the operation (Jim Quinlan) - Correct the "pcie" and "msi" interrupt descriptions in DT binding (Jim Quinlan) - Add DT bindings for endpoint voltage regulators (Jim Quinlan) - Split brcm_pcie_setup() into two functions (Jim Quinlan) - Add mechanism for turning on voltage regulators for connected devices (Jim Quinlan) - Turn voltage regulators for connected devices on/off when bus is added or removed (Jim Quinlan) - When suspending, don't turn off voltage regulators for wakeup devices (Jim Quinlan) Freescale i.MX6 PCIe controller driver: - Add i.MX8MM support (Richard Zhu) Freescale Layerscape PCIe controller driver: - Use DWC common ops instead of layerscape-specific link-up functions (Hou Zhiqiang) Intel VMD host bridge driver: - Honor platform ACPI _OSC feature negotiation for Root Ports below VMD (Kai-Heng Feng) - Add support for Raptor Lake SKUs (Karthik L Gopalakrishnan) - Reset everything below VMD before enumerating to work around failure to enumerate NVMe devices when guest OS reboots (Nirmal Patel) Bridge emulation (used by Marvell Aardvark and MVEBU): - Make emulated ROM BAR read-only by default (Pali Rohár) - Make some emulated legacy PCI bits read-only for PCIe devices (Pali Rohár) - Update reserved bits in emulated PCIe Capability (Pali Rohár) - Allow drivers to emulate different PCIe Capability versions (Pali Rohár) - Set emulated Capabilities List bit for all PCIe devices, since they must have at least a PCIe Capability (Pali Rohár) Marvell Aardvark PCIe controller driver: - Add bridge emulation definitions for PCIe DEVCAP2, DEVCTL2, DEVSTA2, LNKCAP2, LNKCTL2, LNKSTA2, SLTCAP2, SLTCTL2, SLTSTA2 (Pali Rohár) - Add aardvark support for DEVCAP2, DEVCTL2, LNKCAP2 and LNKCTL2 registers (Pali Rohár) - Clear all MSIs at setup to avoid spurious interrupts (Pali Rohár) - Disable bus mastering when unbinding host controller driver (Pali Rohár) - Mask all interrupts when unbinding host controller driver (Pali Rohár) - Fix memory leak in host controller unbind (Pali Rohár) - Assert PERST# when unbinding host controller driver (Pali Rohár) - Disable link training when unbinding host controller driver (Pali Rohár) - Disable common PHY when unbinding host controller driver (Pali Rohár) - Fix resource type checking to check only IORESOURCE_MEM, not IORESOURCE_MEM_64, which is a flavor of IORESOURCE_MEM (Pali Rohár) Marvell MVEBU PCIe controller driver: - Implement pci_remap_iospace() for ARM so mvebu can use devm_pci_remap_iospace() instead of the previous ARM-specific pci_ioremap_io() interface (Pali Rohár) - Use the standard pci_host_probe() instead of the device-specific mvebu_pci_host_probe() (Pali Rohár) - Replace all uses of ARM-specific pci_ioremap_io() with the ARM implementation of the standard pci_remap_iospace() interface and remove pci_ioremap_io() (Pali Rohár) - Skip initializing invalid Root Ports (Pali Rohár) - Check for errors from pci_bridge_emul_init() (Pali Rohár) - Ignore any bridges at non-zero function numbers (Pali Rohár) - Return ~0 data for invalid config read size (Pali Rohár) - Disallow mapping interrupts on emulated bridges (Pali Rohár) - Clear Root Port Memory & I/O Space Enable and Bus Master Enable at initialization (Pali Rohár) - Make type bits in Root Port I/O Base register read-only (Pali Rohár) - Disable Root Port windows when base/limit set to invalid values (Pali Rohár) - Set controller to Root Complex mode (Pali Rohár) - Set Root Port Class Code to PCI Bridge (Pali Rohár) - Update emulated Root Port secondary bus numbers to better reflect the actual topology (Pali Rohár) - Add PCI_BRIDGE_CTL_BUS_RESET support to emulated Root Ports so pci_reset_secondary_bus() can reset connected devices (Pali Rohár) - Add PCI_EXP_DEVCTL Error Reporting Enable support to emulated Root Ports (Pali Rohár) - Add PCI_EXP_RTSTA PME Status bit support to emulated Root Ports (Pali Rohár) - Add DEVCAP2, DEVCTL2 and LNKCTL2 support to emulated Root Ports on Armada XP and newer devices (Pali Rohár) - Export mvebu-mbus.c symbols to allow pci-mvebu.c to be a module (Pali Rohár) - Add support for compiling as a module (Pali Rohár) MediaTek PCIe controller driver: - Assert PERST# for 100ms to allow power and clock to stabilize (qizhong cheng) MediaTek PCIe Gen3 controller driver: - Disable Mediatek DVFSRC voltage request since lack of DVFSRC to respond to the request causes failure to exit L1 PM Substate (Jianjun Wang) MediaTek MT7621 PCIe controller driver: - Declare mt7621_pci_ops static (Sergio Paracuellos) - Give pcibios_root_bridge_prepare() access to host bridge windows (Sergio Paracuellos) - Move MIPS I/O coherency unit setup from driver to pcibios_root_bridge_prepare() (Sergio Paracuellos) - Add missing MODULE_LICENSE() (Sergio Paracuellos) - Allow COMPILE_TEST for all arches (Sergio Paracuellos) Microsoft Hyper-V host bridge driver: - Add hv-internal interfaces to encapsulate arch IRQ dependencies (Sunil Muthuswamy) - Add arm64 Hyper-V vPCI support (Sunil Muthuswamy) Qualcomm PCIe controller driver: - Undo PM setup in qcom_pcie_probe() error handling path (Christophe JAILLET) - Use __be16 type to store return value from cpu_to_be16() (Manivannan Sadhasivam) - Constify static dw_pcie_ep_ops (Rikard Falkeborn) Renesas R-Car PCIe controller driver: - Fix aarch32 abort handler so it doesn't check the wrong bus clock before accessing the host controller (Marek Vasut) TI Keystone PCIe controller driver: - Add register offset for ti,syscon-pcie-id and ti,syscon-pcie-mode DT properties (Kishon Vijay Abraham I) MicroSemi Switchtec management driver: - Add Gen4 automotive device IDs (Kelvin Cao) - Declare state_names[] as static so it's not allocated and initialized for every call (Kelvin Cao) Host controller driver cleanups: - Use of_device_get_match_data(), not of_match_device(), when we only need the device data in altera, artpec6, cadence, designware-plat, dra7xx, keystone, kirin (Fan Fei) - Drop pointless of_device_get_match_data() cast in j721e (Bjorn Helgaas) - Drop redundant struct device * from j721e since struct cdns_pcie already has one (Bjorn Helgaas) - Rename driver structs to *_pcie in intel-gw, iproc, ls-gen4, mediatek-gen3, microchip, mt7621, rcar-gen2, tegra194, uniphier, xgene, xilinx, xilinx-cpm for consistency across drivers (Fan Fei) - Fix invalid address space conversions in hisi, spear13xx (Bjorn Helgaas) Miscellaneous: - Sort Intel Device IDs by value (Andy Shevchenko) - Change Capability offsets to hex to match spec (Baruch Siach) - Correct misspellings (Krzysztof Wilczyński) - Terminate statement with semicolon in pci_endpoint_test.c (Ming Wang)" * tag 'pci-v5.17-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (151 commits) PCI: mt7621: Allow COMPILE_TEST for all arches PCI: mt7621: Add missing MODULE_LICENSE() PCI: mt7621: Move MIPS setup to pcibios_root_bridge_prepare() PCI: Let pcibios_root_bridge_prepare() access bridge->windows PCI: mt7621: Declare mt7621_pci_ops static PCI: brcmstb: Do not turn off WOL regulators on suspend PCI: brcmstb: Add control of subdevice voltage regulators PCI: brcmstb: Add mechanism to turn on subdev regulators PCI: brcmstb: Split brcm_pcie_setup() into two funcs dt-bindings: PCI: Add bindings for Brcmstb EP voltage regulators dt-bindings: PCI: Correct brcmstb interrupts, interrupt-map. PCI: brcmstb: Fix function return value handling PCI: brcmstb: Do not use __GENMASK PCI: brcmstb: Declare 'used' as bitmap, not unsigned long PCI: hv: Add arm64 Hyper-V vPCI support PCI: hv: Make the code arch neutral by adding arch specific interfaces PCI: pciehp: Use down_read/write_nested(reset_lock) to fix lockdep errors x86/PCI: Remove initialization of static variables to false PCI: Use DWORD accesses for LTR, L1 SS to avoid erratum misc: pci_endpoint_test: Terminate statement with semicolon ...
2022-01-11x86/PCI: Remove initialization of static variables to falseGravatar Longji Guo 1-1/+1
Remove the initialization of pci_ignore_seg to false which is pointless. Link: https://lore.kernel.org/r/20211203080758.962-1-guolongji@uniontech.com Signed-off-by: Longji Guo <guolongji@uniontech.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-12-16x86/pci/xen: Use msi_for_each_desc()Gravatar Thomas Gleixner 1-8/+6
Replace the about to vanish iterators. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Link: https://lore.kernel.org/r/20211206210748.198359105@linutronix.de
2021-12-16PCI/MSI: Use msi_desc::msi_indexGravatar Thomas Gleixner 1-1/+1
The usage of msi_desc::pci::entry_nr is confusing at best. It's the index into the MSI[X] descriptor table. Use msi_desc::msi_index which is shared between all MSI incarnations instead of having a PCI specific storage for no value. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Michael Kelley <mikelley@microsoft.com> Tested-by: Nishanth Menon <nm@ti.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://lore.kernel.org/r/20211210221814.602911509@linutronix.de
2021-12-16x86/pci/XEN: Use PCI device propertyGravatar Thomas Gleixner 1-7/+2
instead of fiddling with MSI descriptors. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Link: https://lore.kernel.org/r/20211210221813.311410967@linutronix.de
2021-12-09PCI/MSI: Make arch_restore_msi_irqs() less horrible.Gravatar Thomas Gleixner 1-6/+7
Make arch_restore_msi_irqs() return a boolean which indicates whether the core code should restore the MSI message or not. Get rid of the indirection in x86. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Juergen Gross <jgross@suse.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> # PCI Link: https://lore.kernel.org/r/20211206210224.485668098@linutronix.de
2021-12-09genirq/msi, treewide: Use a named struct for PCI/MSI attributesGravatar Thomas Gleixner 1-3/+3
The unnamed struct sucks and is in the way of further cleanups. Stick the PCI related MSI data into a real data structure and cleanup all users. No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Juergen Gross <jgross@suse.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20211206210224.374863119@linutronix.de
Copyright © 1990 – 2022 jet tsang zeon-git.
All Rights Reverse Engineered.