| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
"Core changes:
- Make default-domains mandatory for all IOMMU drivers
- Remove group refcounting
- Add generic_single_device_group() helper and consolidate drivers
- Cleanup map/unmap ops
- Scaling improvements for the IOVA rcache depot
- Convert dart & iommufd to the new domain_alloc_paging()
ARM-SMMU:
- Device-tree binding update:
- Add qcom,sm7150-smmu-v2 for Adreno on SM7150 SoC
- SMMUv2:
- Support for Qualcomm SDM670 (MDSS) and SM7150 SoCs
- SMMUv3:
- Large refactoring of the context descriptor code to move the CD
table into the master, paving the way for '->set_dev_pasid()'
support on non-SVA domains
- Minor cleanups to the SVA code
Intel VT-d:
- Enable debugfs to dump domain attached to a pasid
- Remove an unnecessary inline function
AMD IOMMU:
- Initial patches for SVA support (not complete yet)
S390 IOMMU:
- DMA-API conversion and optimized IOTLB flushing
And some smaller fixes and improvements"
* tag 'iommu-updates-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (102 commits)
iommu/dart: Remove the force_bypass variable
iommu/dart: Call apple_dart_finalize_domain() as part of alloc_paging()
iommu/dart: Convert to domain_alloc_paging()
iommu/dart: Move the blocked domain support to a global static
iommu/dart: Use static global identity domains
iommufd: Convert to alloc_domain_paging()
iommu/vt-d: Use ops->blocked_domain
iommu/vt-d: Update the definition of the blocking domain
iommu: Move IOMMU_DOMAIN_BLOCKED global statics to ops->blocked_domain
Revert "iommu/vt-d: Remove unused function"
iommu/amd: Remove DMA_FQ type from domain allocation path
iommu: change iommu_map_sgtable to return signed values
iommu/virtio: Add __counted_by for struct viommu_request and use struct_size()
iommu/vt-d: debugfs: Support dumping a specified page table
iommu/vt-d: debugfs: Create/remove debugfs file per {device, pasid}
iommu/vt-d: debugfs: Dump entry pointing to huge page
iommu/vt-d: Remove unused function
iommu/arm-smmu-v3-sva: Remove bond refcount
iommu/arm-smmu-v3-sva: Remove unused iommu_sva handle
iommu/arm-smmu-v3: Rename cdcfg to cd_table
...
|
|
This patch leverages the alternative mechanism to dynamically optimize
bitops (including __ffs, __fls, ffs, fls) with Zbb instructions. When
Zbb ext is not supported by the runtime CPU, legacy implementation is
used. If Zbb is supported, then the optimized variants will be selected
via alternative patching.
The legacy bitops support is taken from the generic C implementation as
fallback.
If the parameter is a build-time constant, we leverage compiler builtin to
calculate the result directly, this approach is inspired by x86 bitops
implementation.
EFI stub runs before the kernel, so alternative mechanism should not be
used there, this patch introduces a macro NO_ALTERNATIVE for this purpose.
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Link: https://lore.kernel.org/r/20231031064553.2319688-3-xiao.w.wang@intel.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Now hwcap.h and cpufeature.h are mutually including each other, and most of
the variable/API declarations in hwcap.h are implemented in cpufeature.c,
so, it's better to move them into cpufeature.h and leave only macros for
ISA extension logical IDs in hwcap.h.
BTW, the riscv_isa_extension_mask macro is not used now, so this patch
removes it.
Suggested-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20231031064553.2319688-2-xiao.w.wang@intel.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Commit 6ac19f96515e ("arm64: avoid prototype warnings for syscalls")
added missing declarations to various syscall wrapper macros. It
however proved a little too zealous in __SYSCALL_DEFINEx(), as a
declaration for __arm64_sys##name was already present. A declaration
is required before the call to ALLOW_ERROR_INJECTION(), so keep
the original one and remove the new one.
Fixes: 6ac19f96515e ("arm64: avoid prototype warnings for syscalls")
Signed-off-by: Kevin Brodsky <kevin.brodsky@arm.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20231109141153.250046-1-kevin.brodsky@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
counter"
This is really just a single patch, but since the offending fix hasn't
yet made it to my for-next I'm merging it here.
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Currently, the kernel enumerates the possible CPUs by parsing both ACPI
MADT Local APIC entries and x2APIC entries. So CPUs with "valid" APIC IDs,
even if they have duplicated APIC IDs in Local APIC and x2APIC, are always
enumerated.
Below is what ACPI MADT Local APIC and x2APIC describes on an
Ivebridge-EP system,
[02Ch 0044 1] Subtable Type : 00 [Processor Local APIC]
[02Fh 0047 1] Local Apic ID : 00
...
[164h 0356 1] Subtable Type : 00 [Processor Local APIC]
[167h 0359 1] Local Apic ID : 39
[16Ch 0364 1] Subtable Type : 00 [Processor Local APIC]
[16Fh 0367 1] Local Apic ID : FF
...
[3ECh 1004 1] Subtable Type : 09 [Processor Local x2APIC]
[3F0h 1008 4] Processor x2Apic ID : 00000000
...
[B5Ch 2908 1] Subtable Type : 09 [Processor Local x2APIC]
[B60h 2912 4] Processor x2Apic ID : 00000077
As a result, kernel shows "smpboot: Allowing 168 CPUs, 120 hotplug CPUs".
And this wastes significant amount of memory for the per-cpu data.
Plus this also breaks https://lore.kernel.org/all/87edm36qqb.ffs@tglx/,
because __max_logical_packages is over-estimated by the APIC IDs in
the x2APIC entries.
According to https://uefi.org/specs/ACPI/6.5/05_ACPI_Software_Programming_Model.html#processor-local-x2apic-structure:
"[Compatibility note] On some legacy OSes, Logical processors with APIC
ID values less than 255 (whether in XAPIC or X2APIC mode) must use the
Processor Local APIC structure to convey their APIC information to OSPM,
and those processors must be declared in the DSDT using the Processor()
keyword. Logical processors with APIC ID values 255 and greater must use
the Processor Local x2APIC structure and be declared using the Device()
keyword."
Therefore prevent the registration of x2APIC entries with an APIC ID less
than 255 if the local APIC table enumerates valid APIC IDs.
[ tglx: Simplify the logic ]
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230702162802.344176-1-rui.zhang@intel.com
|
|
These two ended up in the AIA series, but they're really independent
improvements.
* b4-shazam-merge:
of: property: Add fw_devlink support for msi-parent
RISC-V: Don't fail in riscv_of_parent_hartid() for disabled HARTs
Link: https://lore.kernel.org/r/20231027154254.355853-1-apatel@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
The riscv_of_processor_hartid() used by riscv_of_parent_hartid() fails
for HARTs disabled in the DT. This results in the following warning
thrown by the RISC-V INTC driver for the E-core on SiFive boards:
[ 0.000000] riscv-intc: unable to find hart id for /cpus/cpu@0/interrupt-controller
The riscv_of_parent_hartid() is only expected to read the hartid
from the DT so we directly call of_get_cpu_hwid() instead of calling
riscv_of_processor_hartid().
Fixes: ad635e723e17 ("riscv: cpu: Add 64bit hartid support on RV64")
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20231027154254.355853-2-apatel@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull more s390 updates from Vasily Gorbik:
- Get rid of s390 specific use of two PTEs per 4KB page with complex
half-used pages tracking. Using full 4KB pages for 2KB PTEs increases
the memory footprint of page tables but drastically simplify mm code,
removing a common blocker for common code changes and adaptations
- Simplify and rework "cmma no-dat" handling. This is a follow up for
recent fixes which prevent potential incorrect guest TLB flushes
- Add perf user stack unwinding as well as USER_STACKTRACE support for
user space built with -mbackchain compile option
- Add few missing conversion from tlb_remove_table to tlb_remove_ptdesc
- Fix crypto cards vanishing in a secure execution environment due to
asynchronous errors
- Avoid reporting crypto cards or queues in check-stop state as online
- Fix null-ptr deference in AP bus code triggered by early config
change via SCLP
- Couple of stability improvements in AP queue interrupt handling
* tag 's390-6.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/mm: make pte_free_tlb() similar to pXd_free_tlb()
s390/mm: use compound page order to distinguish page tables
s390/mm: use full 4KB page for 2KB PTE
s390/cmma: rework no-dat handling
s390/cmma: move arch_set_page_dat() to header file
s390/cmma: move set_page_stable() and friends to header file
s390/cmma: move parsing of cmma kernel parameter to early boot code
s390/cmma: cleanup inline assemblies
s390/ap: fix vanishing crypto cards in SE environment
s390/zcrypt: don't report online if card or queue is in check-stop state
s390: add USER_STACKTRACE support
s390/perf: implement perf_callchain_user()
s390/ap: fix AP bus crash on early config change callback invocation
s390/ap: re-enable interrupt for AP queues
s390/ap: rework to use irq info from ap queue status
s390/mm: add missing conversion to use ptdescs
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- Support for cbo.zero in userspace
- Support for CBOs on ACPI-based systems
- A handful of improvements for the T-Head cache flushing ops
- Support for software shadow call stacks
- Various cleanups and fixes
* tag 'riscv-for-linus-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (31 commits)
RISC-V: hwprobe: Fix vDSO SIGSEGV
riscv: configs: defconfig: Enable configs required for RZ/Five SoC
riscv: errata: prefix T-Head mnemonics with th.
riscv: put interrupt entries into .irqentry.text
riscv: mm: Update the comment of CONFIG_PAGE_OFFSET
riscv: Using TOOLCHAIN_HAS_ZIHINTPAUSE marco replace zihintpause
riscv/mm: Fix the comment for swap pte format
RISC-V: clarify the QEMU workaround in ISA parser
riscv: correct pt_level name via pgtable_l5/4_enabled
RISC-V: Provide pgtable_l5_enabled on rv32
clocksource: timer-riscv: Increase rating of clock_event_device for Sstc
clocksource: timer-riscv: Don't enable/disable timer interrupt
lkdtm: Fix CFI_BACKWARD on RISC-V
riscv: Use separate IRQ shadow call stacks
riscv: Implement Shadow Call Stack
riscv: Move global pointer loading to a macro
riscv: Deduplicate IRQ stack switching
riscv: VMAP_STACK overflow detection thread-safe
RISC-V: cacheflush: Initialize CBO variables on ACPI systems
RISC-V: ACPI: RHCT: Add function to get CBO block sizes
...
|
|
When a signal is being delivered, the kernel needs to make accesses to
userspace. These accesses could encounter an access error, in which case
the signal delivery itself will trigger a segfault. Usually this would
result in the kernel killing the process. But in the case of a SEGV signal
handler being configured, the failure of the first signal delivery will
result in *another* signal getting delivered. The second signal may
succeed if another thread has resolved the issue that triggered the
segfault (i.e. a well timed mprotect()/mmap()), or the second signal is
being delivered to another stack (i.e. an alt stack).
On x86, in the non-shadow stack case, all the accesses to userspace are
done before changes to the registers (in pt_regs). The operation is
aborted when an access error occurs, so although there may be writes done
for the first signal, control flow changes for the signal (regs->ip,
regs->sp, etc) are not committed until all the accesses have already
completed successfully. This means that the second signal will be
delivered as if it happened at the time of the first signal. It will
effectively replace the first aborted signal, overwriting the half-written
frame of the aborted signal. So on sigreturn from the second signal,
control flow will resume happily from the point of control flow where the
original signal was delivered.
The problem is, when shadow stack is active, the shadow stack SSP
register/MSR is updated *before* some of the userspace accesses. This
means if the earlier accesses succeed and the later ones fail, the second
signal will not be delivered at the same spot on the shadow stack as the
first one. So on sigreturn from the second signal, the SSP will be
pointing to the wrong location on the shadow stack (off by a frame).
Pengfei privately reported that while using a shadow stack enabled glibc,
the “signal06” test in the LTP test-suite hung. It turns out it is
testing the above described double signal scenario. When this test was
compiled with shadow stack, the first signal pushed a shadow stack
sigframe, then the second pushed another. When the second signal was
handled, the SSP was at the first shadow stack signal frame instead of
the original location. The test then got stuck as the #CP from the twice
incremented SSP was incorrect and generated segfaults in a loop.
Fix this by adjusting the SSP register only after any userspace accesses,
such that there can be no failures after the SSP is adjusted. Do this by
moving the shadow stack sigframe push logic to happen after all other
userspace accesses.
Note, sigreturn (as opposed to the signal delivery dealt with in this
patch) has ordering behavior that could lead to similar failures. The
ordering issues there extend beyond shadow stack to include the alt stack
restoration. Fixing that would require cross-arch changes, and the
ordering today does not cause any known test or apps breakages. So leave
it as is, for now.
[ dhansen: minor changelog/subject tweak ]
Fixes: 05e36022c054 ("x86/shstk: Handle signals for shadow stack")
Reported-by: Pengfei Xu <pengfei.xu@intel.com>
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Tested-by: Pengfei Xu <pengfei.xu@intel.com>
Cc:stable@vger.kernel.org
Link: https://lore.kernel.org/all/20231107182251.91276-1-rick.p.edgecombe%40intel.com
Link: https://github.com/linux-test-project/ltp/blob/master/testcases/kernel/syscalls/signal/signal06.c
|
|
This reverts commit a07a594152173a3dd3bdd12fc7d73dbba54cdbca.
This is no longer needed after the patch ("arm64: Move MediaTek GIC
quirk handling from irqchip to core).
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20231107072651.v2.2.I2c5fa192e767eb3ee233bc28eb60e2f8656c29a6@changeid
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
In commit 44bd78dd2b88 ("irqchip/gic-v3: Disable pseudo NMIs on
MediaTek devices w/ firmware issues") we added a method for detecting
MediaTek devices with broken firmware and disabled pseudo-NMI. While
that worked, it didn't address the problem at a deep enough level.
The fundamental issue with this broken firmware is that it's not
saving and restoring several important GICR registers. The current
list is believed to be:
* GICR_NUM_IPRIORITYR
* GICR_CTLR
* GICR_ISPENDR0
* GICR_ISACTIVER0
* GICR_NSACR
Pseudo-NMI didn't work because it was the only thing (currently) in
the kernel that relied on the broken registers, so forcing pseudo-NMI
off was an effective fix. However, it could be observed that calling
system_uses_irq_prio_masking() on these systems still returned
"true". That caused confusion and led to the need for
commit a07a59415217 ("arm64: smp: avoid NMI IPIs with broken MediaTek
FW"). It's worried that the incorrect value returned by
system_uses_irq_prio_masking() on these systems will continue to
confuse future developers.
Let's fix the issue a little more completely by disabling IRQ
priorities at a deeper level in the kernel. Once we do this we can
revert some of the other bits of code dealing with this quirk.
This includes a partial revert of commit 44bd78dd2b88
("irqchip/gic-v3: Disable pseudo NMIs on MediaTek devices w/ firmware
issues"). This isn't a full revert because it leaves some of the
changes to the "quirks" structure around in case future code needs it.
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20231107072651.v2.1.Ide945748593cffd8ff0feb9ae22b795935b944d6@changeid
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Alexandre Ghiti <alexghiti@rivosinc.com> says:
Those 2 patches fix the set_memory_XX() and set_direct_map_XX() APIs, which
in turn fix STRICT_KERNEL_RWX and memfd_secret(). Those were broken since the
permission changes were not applied to the linear mapping because the linear
mapping is mapped using hugepages and walk_page_range_novma() does not split
such mappings.
To fix that, patch 1 disables PGD mappings in the linear mapping as it is
hard to propagate changes at this level in *all* the page tables, this has the
downside of disabling PMD mapping for sv32 and PUD (1GB) mapping for sv39 in
the linear mapping (for specific kernels, we could add a Kconfig to enable
ARCH_HAS_SET_DIRECT_MAP and STRICT_KERNEL_RWX if needed, I'm pretty sure we'll
discuss that).
patch 2 implements the split of the huge linear mappings so that
walk_page_range_novma() can properly apply the permissions. The whole split is
protected with mmap_sem in write mode, but I'm wondering if that's enough,
any opinion on that is appreciated.
* b4-shazam-merge:
riscv: Fix set_memory_XX() and set_direct_map_XX() by splitting huge linear mappings
riscv: Don't use PGD entries for the linear mapping
Link: https://lore.kernel.org/r/20231108075930.7157-1-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
mappings
When STRICT_KERNEL_RWX is set, any change of permissions on any kernel
mapping (vmalloc/modules/kernel text...etc) should be applied on its
linear mapping alias. The problem is that the riscv kernel uses huge
mappings for the linear mapping and walk_page_range_novma() does not
split those huge mappings.
So this patchset implements such split in order to apply fine-grained
permissions on the linear mapping.
Below is the difference before and after (the first PUD mapping is split
into PTE/PMD mappings):
Before:
---[ Linear mapping ]---
0xffffaf8000080000-0xffffaf8000200000 0x0000000080080000 1536K PTE D A G . . W R V
0xffffaf8000200000-0xffffaf8077c00000 0x0000000080200000 1914M PMD D A G . . W R V
0xffffaf8077c00000-0xffffaf8078800000 0x00000000f7c00000 12M PMD D A G . . . R V
0xffffaf8078800000-0xffffaf8078c00000 0x00000000f8800000 4M PMD D A G . . W R V
0xffffaf8078c00000-0xffffaf8079200000 0x00000000f8c00000 6M PMD D A G . . . R V
0xffffaf8079200000-0xffffaf807e600000 0x00000000f9200000 84M PMD D A G . . W R V
0xffffaf807e600000-0xffffaf807e716000 0x00000000fe600000 1112K PTE D A G . . W R V
0xffffaf807e717000-0xffffaf807e71a000 0x00000000fe717000 12K PTE D A G . . W R V
0xffffaf807e71d000-0xffffaf807e71e000 0x00000000fe71d000 4K PTE D A G . . W R V
0xffffaf807e722000-0xffffaf807e800000 0x00000000fe722000 888K PTE D A G . . W R V
0xffffaf807e800000-0xffffaf807fe00000 0x00000000fe800000 22M PMD D A G . . W R V
0xffffaf807fe00000-0xffffaf807ff54000 0x00000000ffe00000 1360K PTE D A G . . W R V
0xffffaf807ff55000-0xffffaf8080000000 0x00000000fff55000 684K PTE D A G . . W R V
0xffffaf8080000000-0xffffaf8400000000 0x0000000100000000 14G PUD D A G . . W R V
After:
---[ Linear mapping ]---
0xffffaf8000080000-0xffffaf8000200000 0x0000000080080000 1536K PTE D A G . . W R V
0xffffaf8000200000-0xffffaf8077c00000 0x0000000080200000 1914M PMD D A G . . W R V
0xffffaf8077c00000-0xffffaf8078800000 0x00000000f7c00000 12M PMD D A G . . . R V
0xffffaf8078800000-0xffffaf8078a00000 0x00000000f8800000 2M PMD D A G . . W R V
0xffffaf8078a00000-0xffffaf8078c00000 0x00000000f8a00000 2M PTE D A G . . W R V
0xffffaf8078c00000-0xffffaf8079200000 0x00000000f8c00000 6M PMD D A G . . . R V
0xffffaf8079200000-0xffffaf807e600000 0x00000000f9200000 84M PMD D A G . . W R V
0xffffaf807e600000-0xffffaf807e716000 0x00000000fe600000 1112K PTE D A G . . W R V
0xffffaf807e717000-0xffffaf807e71a000 0x00000000fe717000 12K PTE D A G . . W R V
0xffffaf807e71d000-0xffffaf807e71e000 0x00000000fe71d000 4K PTE D A G . . W R V
0xffffaf807e722000-0xffffaf807e800000 0x00000000fe722000 888K PTE D A G . . W R V
0xffffaf807e800000-0xffffaf807fe00000 0x00000000fe800000 22M PMD D A G . . W R V
0xffffaf807fe00000-0xffffaf807ff54000 0x00000000ffe00000 1360K PTE D A G . . W R V
0xffffaf807ff55000-0xffffaf8080000000 0x00000000fff55000 684K PTE D A G . . W R V
0xffffaf8080000000-0xffffaf8080800000 0x0000000100000000 8M PMD D A G . . W R V
0xffffaf8080800000-0xffffaf8080af6000 0x0000000100800000 3032K PTE D A G . . W R V
0xffffaf8080af6000-0xffffaf8080af8000 0x0000000100af6000 8K PTE D A G . X . R V
0xffffaf8080af8000-0xffffaf8080c00000 0x0000000100af8000 1056K PTE D A G . . W R V
0xffffaf8080c00000-0xffffaf8081a00000 0x0000000100c00000 14M PMD D A G . . W R V
0xffffaf8081a00000-0xffffaf8081a40000 0x0000000101a00000 256K PTE D A G . . W R V
0xffffaf8081a40000-0xffffaf8081a44000 0x0000000101a40000 16K PTE D A G . X . R V
0xffffaf8081a44000-0xffffaf8081a52000 0x0000000101a44000 56K PTE D A G . . W R V
0xffffaf8081a52000-0xffffaf8081a54000 0x0000000101a52000 8K PTE D A G . X . R V
...
0xffffaf809e800000-0xffffaf80c0000000 0x000000011e800000 536M PMD D A G . . W R V
0xffffaf80c0000000-0xffffaf8400000000 0x0000000140000000 13G PUD D A G . . W R V
Note that this also fixes memfd_secret() syscall which uses
set_direct_map_invalid_noflush() and set_direct_map_default_noflush() to
remove the pages from the linear mapping. Below is the kernel page table
while a memfd_secret() syscall is running, you can see all the !valid
page table entries in the linear mapping:
...
0xffffaf8082240000-0xffffaf8082241000 0x0000000102240000 4K PTE D A G . . W R .
0xffffaf8082241000-0xffffaf8082250000 0x0000000102241000 60K PTE D A G . . W R V
0xffffaf8082250000-0xffffaf8082252000 0x0000000102250000 8K PTE D A G . . W R .
0xffffaf8082252000-0xffffaf8082256000 0x0000000102252000 16K PTE D A G . . W R V
0xffffaf8082256000-0xffffaf8082257000 0x0000000102256000 4K PTE D A G . . W R .
0xffffaf8082257000-0xffffaf8082258000 0x0000000102257000 4K PTE D A G . . W R V
0xffffaf8082258000-0xffffaf8082259000 0x0000000102258000 4K PTE D A G . . W R .
0xffffaf8082259000-0xffffaf808225a000 0x0000000102259000 4K PTE D A G . . W R V
0xffffaf808225a000-0xffffaf808225c000 0x000000010225a000 8K PTE D A G . . W R .
0xffffaf808225c000-0xffffaf8082266000 0x000000010225c000 40K PTE D A G . . W R V
0xffffaf8082266000-0xffffaf8082268000 0x0000000102266000 8K PTE D A G . . W R .
0xffffaf8082268000-0xffffaf8082284000 0x0000000102268000 112K PTE D A G . . W R V
0xffffaf8082284000-0xffffaf8082288000 0x0000000102284000 16K PTE D A G . . W R .
0xffffaf8082288000-0xffffaf808229c000 0x0000000102288000 80K PTE D A G . . W R V
0xffffaf808229c000-0xffffaf80822a0000 0x000000010229c000 16K PTE D A G . . W R .
0xffffaf80822a0000-0xffffaf80822a5000 0x00000001022a0000 20K PTE D A G . . W R V
0xffffaf80822a5000-0xffffaf80822a6000 0x00000001022a5000 4K PTE D A G . . . R V
0xffffaf80822a6000-0xffffaf80822ab000 0x00000001022a6000 20K PTE D A G . . W R V
...
And when the memfd_secret() fd is released, the linear mapping is
correctly reset:
...
0xffffaf8082240000-0xffffaf80822a5000 0x0000000102240000 404K PTE D A G . . W R V
0xffffaf80822a5000-0xffffaf80822a6000 0x00000001022a5000 4K PTE D A G . . . R V
0xffffaf80822a6000-0xffffaf80822af000 0x00000001022a6000 36K PTE D A G . . W R V
...
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20231108075930.7157-3-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Propagating changes at this level is cumbersome as we need to go through
all the page tables when that happens (either when changing the
permissions or when splitting the mapping).
Note that this prevents the use of 4MB mapping for sv32 and 1GB mapping for
sv39 in the linear mapping.
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20231108075930.7157-2-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Add support for signed mod instructions.
Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Add support for signed div instructions.
Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Add support for 32-bit offset jmp instruction. Currently, we use b
instruction which supports range within ±128MB for such jumps. This
should be large enough for BPF progs.
Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Add support for unconditional bswap instruction. Since LoongArch is
always little-endian, just treat unconditional bswap the same as big-
endian conversion.
Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Add support for sign-extension mov instructions.
Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Add support for sign-extension load instructions.
Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
This patch adds more instruction opcodes and their corresponding emit_*
helpers which will be used in later patches.
Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
rcutree_report_cpu_starting() must be called before cpu_probe() to avoid
the following lockdep splat that triggered by calling __alloc_pages() when
CONFIG_PROVE_RCU_LIST=y:
=============================
WARNING: suspicious RCU usage
6.6.0+ #980 Not tainted
-----------------------------
kernel/locking/lockdep.c:3761 RCU-list traversed in non-reader section!!
other info that might help us debug this:
RCU used illegally from offline CPU!
rcu_scheduler_active = 1, debug_locks = 1
1 lock held by swapper/1/0:
#0: 900000000c82ef98 (&pcp->lock){+.+.}-{2:2}, at: get_page_from_freelist+0x894/0x1790
CPU: 1 PID: 0 Comm: swapper/1 Not tainted 6.6.0+ #980
Stack : 0000000000000001 9000000004f79508 9000000004893670 9000000100310000
90000001003137d0 0000000000000000 90000001003137d8 9000000004f79508
0000000000000000 0000000000000001 0000000000000000 90000000048a3384
203a656d616e2065 ca43677b3687e616 90000001002c3480 0000000000000008
000000000000009d 0000000000000000 0000000000000001 80000000ffffe0b8
000000000000000d 0000000000000033 0000000007ec0000 13bbf50562dad831
9000000005140748 0000000000000000 9000000004f79508 0000000000000004
0000000000000000 9000000005140748 90000001002bad40 0000000000000000
90000001002ba400 0000000000000000 9000000003573ec8 0000000000000000
00000000000000b0 0000000000000004 0000000000000000 0000000000070000
...
Call Trace:
[<9000000003573ec8>] show_stack+0x38/0x150
[<9000000004893670>] dump_stack_lvl+0x74/0xa8
[<900000000360d2bc>] lockdep_rcu_suspicious+0x14c/0x190
[<900000000361235c>] __lock_acquire+0xd0c/0x2740
[<90000000036146f4>] lock_acquire+0x104/0x2c0
[<90000000048a955c>] _raw_spin_lock_irqsave+0x5c/0x90
[<900000000381cd5c>] rmqueue_bulk+0x6c/0x950
[<900000000381fc0c>] get_page_from_freelist+0xd4c/0x1790
[<9000000003821c6c>] __alloc_pages+0x1bc/0x3e0
[<9000000003583b40>] tlb_init+0x150/0x2a0
[<90000000035742a0>] per_cpu_trap_init+0xf0/0x110
[<90000000035712fc>] cpu_probe+0x3dc/0x7a0
[<900000000357ed20>] start_secondary+0x40/0xb0
[<9000000004897138>] smpboot_entry+0x54/0x58
raw_smp_processor_id() is required in order to avoid calling into lockdep
before RCU has declared the CPU to be watched for readers.
See also commit 29368e093921 ("x86/smpboot: Move rcu_cpu_starting() earlier"),
commit de5d9dae150c ("s390/smp: move rcu_cpu_starting() earlier") and commit
99f070b62322 ("powerpc/smp: Call rcu_cpu_starting() earlier").
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
This patch relaxes the implementation while satisfying the memory ordering
requirements for atomic operations, which will help improve performance on
LA664+.
Unixbench with full threads (8)
before after
Dhrystone 2 using register variables 203910714.2 203909539.8 0.00%
Double-Precision Whetstone 37930.9 37931 0.00%
Execl Throughput 29431.5 29545.8 0.39%
File Copy 1024 bufsize 2000 maxblocks 6645759.5 6676320 0.46%
File Copy 256 bufsize 500 maxblocks 2138772.4 2144182.4 0.25%
File Copy 4096 bufsize 8000 maxblocks 11640698.4 11602703 -0.33%
Pipe Throughput 8849077.7 8917009.4 0.77%
Pipe-based Context Switching 1255108.5 1287277.3 2.56%
Process Creation 50825.9 50442.1 -0.76%
Shell Scripts (1 concurrent) 25795.8 25942.3 0.57%
Shell Scripts (8 concurrent) 3812.6 3835.2 0.59%
System Call Overhead 9248212.6 9353348.6 1.14%
=======
System Benchmarks Index Score 8076.6 8114.4 0.47%
Signed-off-by: WANG Rui <wangrui@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
A recent change to the optimization pipeline in LLVM reveals some
fragility around the inlining of LoongArch's __percpu functions, which
manifests as a BUILD_BUG() failure:
In file included from kernel/sched/build_policy.c:17:
In file included from include/linux/sched/cputime.h:5:
In file included from include/linux/sched/signal.h:5:
In file included from include/linux/rculist.h:11:
In file included from include/linux/rcupdate.h:26:
In file included from include/linux/irqflags.h:18:
arch/loongarch/include/asm/percpu.h:97:3: error: call to '__compiletime_assert_51' declared with 'error' attribute: BUILD_BUG failed
97 | BUILD_BUG();
| ^
include/linux/build_bug.h:59:21: note: expanded from macro 'BUILD_BUG'
59 | #define BUILD_BUG() BUILD_BUG_ON_MSG(1, "BUILD_BUG failed")
| ^
include/linux/build_bug.h:39:37: note: expanded from macro 'BUILD_BUG_ON_MSG'
39 | #define BUILD_BUG_ON_MSG(cond, msg) compiletime_assert(!(cond), msg)
| ^
include/linux/compiler_types.h:425:2: note: expanded from macro 'compiletime_assert'
425 | _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
| ^
include/linux/compiler_types.h:413:2: note: expanded from macro '_compiletime_assert'
413 | __compiletime_assert(condition, msg, prefix, suffix)
| ^
include/linux/compiler_types.h:406:4: note: expanded from macro '__compiletime_assert'
406 | prefix ## suffix(); \
| ^
<scratch space>:86:1: note: expanded from here
86 | __compiletime_assert_51
| ^
1 error generated.
If these functions are not inlined (which the compiler is free to do
even with functions marked with the standard 'inline' keyword), the
BUILD_BUG() in the default case cannot be eliminated since the compiler
cannot prove it is never used, resulting in a build failure due to the
error attribute.
Mark these functions as __always_inline to guarantee inlining so that
the BUILD_BUG() only triggers when the default case genuinely cannot be
eliminated due to an unexpected size.
Cc: <stable@vger.kernel.org>
Closes: https://github.com/ClangBuiltLinux/linux/issues/1955
Fixes: 46859ac8af52 ("LoongArch: Add multi-processor (SMP) support")
Link: https://github.com/llvm/llvm-project/commit/1a2e77cf9e11dbf56b5720c607313a566eebb16e
Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
The distance between vmlinux and the module is too far so that PC-REL
cannot be accessed directly, only GOT.
When compiling module with GCC, the option `-mdirect-extern-access` is
disabled by default. The Clang option `-fdirect-access-external-data` is
enabled by default, so it needs to be explicitly disabled.
Signed-off-by: WANG Rui <wangrui@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Since commit 4e90d0522a688371402c ("riscv: support PREEMPT_DYNAMIC with
static keys"), the infrastructure is complete and we can simply select
HAVE_PREEMPT_DYNAMIC_KEY to enable PREEMPT_DYNAMIC on LoongArch because
we already support static keys.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull remoteproc updates from Bjorn Andersson:
"Support for controlling the second core in Mediatek's SCP dual-core
setup is introduced.
Support for audio, compute and modem DSPs on Qualcomm SM6375, and the
audio DSP in SC7180 are introduced. The peripheral NoC clock is
dropped from MSM8996 modem DSP, as this is handled through the
interconnect provider.
In the zynqmp driver the setup for TCM memory, and device address
translation thereof, when operating in lockstep mode is corrected.
A few bug fixes and cleanups are introduces across the ST and STM32
remoteproc drivers"
* tag 'rproc-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (28 commits)
remoteproc: st: Fix sometimes uninitialized ret in st_rproc_probe()
remoteproc: st: Use device_get_match_data()
remoteproc: zynqmp: Change tcm address translation method
remoteproc: mediatek: Refactor single core check and fix retrocompatibility
remoteproc: qcom: q6v5-mss: Remove PNoC clock from 8996 MSS
dt-bindings: remoteproc: qcom,msm8996-mss-pil: Remove PNoC clock
dt-bindings: remoteproc: qcom,adsp: Remove AGGRE2 clock
remoteproc: qcom: pas: Add SM6375 MPSS
remoteproc: qcom: pas: Add SM6375 ADSP & CDSP
dt-bindings: remoteproc: qcom,sm6375-pas: Document remoteprocs
dt-bindings: remoteproc: pru: Add Interrupt property
remoteproc: qcom: pas: Add sc7180 adsp
dt-bindings: remoteproc: qcom: sc7180-pas: Add ADSP compatible
arm64: dts: mediatek: Update the node name of SCP rpmsg subnode
remoteproc: zynqmp: fix TCM carveouts in lockstep mode
remoteproc: mediatek: Refine ipi handler error message
remoteproc: mediatek: Report watchdog crash to all cores
remoteproc: mediatek: Handle MT8195 SCP core 1 watchdog timeout
remoteproc: mediatek: Setup MT8195 SCP core 1 SRAM offset
remoteproc: mediatek: Remove dependency of MT8195 SCP L2TCM power control on dual-core SCP
...
|
|
Probing for misaligned access speed takes about 0.06 seconds. On a
system with 64 cores, doing this in smp_callin() means it's done
serially, extending boot time by 3.8 seconds. That's a lot of boot time.
Instead of measuring each CPU serially, let's do the measurements on
all CPUs in parallel. If we disable preemption on all CPUs, the
jiffies stop ticking, so we can do this in stages of 1) everybody
except core 0, then 2) core 0. The allocations are all done outside of
on_each_cpu() to avoid calling alloc_pages() with interrupts disabled.
For hotplugged CPUs that come in after the boot time measurement,
register CPU hotplug callbacks, and do the measurement there. Interrupts
are enabled in those callbacks, so they're fine to do alloc_pages() in.
Reported-by: Jisheng Zhang <jszhang@kernel.org>
Closes: https://lore.kernel.org/all/mhng-9359993d-6872-4134-83ce-c97debe1cf9a@palmer-ri-x1c9/T/#mae9b8f40016f9df428829d33360144dc5026bcbf
Fixes: 584ea6564bca ("RISC-V: Probe for unaligned access speed")
Signed-off-by: Evan Green <evan@rivosinc.com>
Link: https://lore.kernel.org/r/20231106225855.3121724-1-evan@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
This function shouldn't be __init, since it's called during hotplug. The
warning says it well enough:
WARNING: modpost: vmlinux: section mismatch in reference:
check_unaligned_access_all_cpus+0x13a (section: .text) ->
unaligned_emulation_finish (section: .init.text)
Signed-off-by: Evan Green <evan@rivosinc.com>
Fixes: 71c54b3d169d ("riscv: report misaligned accesses emulation to hwprobe")
Link: https://lore.kernel.org/r/20231106231105.3141413-1-evan@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
In /proc/cpuinfo, most of the information we show for each processor is
specific to that hart: marchid, mvendorid, mimpid, processor, hart,
compatible, and the mmu size. But the ISA string gets filtered through a
lowest common denominator mask, so that if one CPU is missing an ISA
extension, no CPUs will show it.
Now that we track the ISA extensions for each hart, let's report ISA
extension info accurately per-hart in /proc/cpuinfo. We cannot change
the "isa:" line, as usermode may be relying on that line to show only
the common set of extensions supported across all harts. Add a new "hart
isa" line instead, which reports the true set of extensions for that
hart.
Signed-off-by: Evan Green <evan@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20231106232439.3176268-1-evan@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Without this I get a bunch of warnings along the lines of
arch/riscv/kernel/module.c:535:26: error: positional initialization of field in 'struct' declared with 'designated_init' attribute [-Werror=designated-init]
535 | [R_RISCV_32] = { apply_r_riscv_32_rela },
This just mades the member initializers explicit instead of positional.
I also aligned some of the table, but mostly just to make the batch
editing go faster.
Fixes: b51fc88cb35e ("Merge patch series "riscv: Add remaining module relocations and tests"")
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Link: https://lore.kernel.org/r/20231107155529.8368-1-palmer@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Charlie Jenkins <charlie@rivosinc.com> says:
A handful of module relocations were missing, this patch includes the
remaining ones. I also wrote some test cases to ensure that module
loading works properly. Some relocations cannot be supported in the
kernel, these include the ones that rely on thread local storage and
dynamic linking.
This patch also overhauls the implementation of ADD/SUB/SET/ULEB128
relocations to handle overflow. "Overflow" is different for ULEB128
since it is a variable-length encoding that the compiler can be expected
to generate enough space for. Instead of overflowing, ULEB128 will
expand into the next 8-bit segment of the location.
A psABI proposal [1] was merged that mandates that SET_ULEB128 and
SUB_ULEB128 are paired, however the discussion following the merging of
the pull request revealed that while the pull request was valid, it
would be better for linkers to properly handle this overflow. This patch
proactively implements this methodology for future compatibility.
This can be tested by enabling KUNIT, RUNTIME_KERNEL_TESTING_MENU, and
RISCV_MODULE_LINKING_KUNIT.
[1] https://github.com/riscv-non-isa/riscv-elf-psabi-doc/pull/403
* b4-shazam-merge:
riscv: Add tests for riscv module loading
riscv: Add remaining module relocations
riscv: Avoid unaligned access when relocating modules
Link: https://lore.kernel.org/r/20231101-module_relocations-v9-0-8dfa3483c400@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Add test cases for the two main groups of relocations added: SUB and
SET, along with uleb128.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Link: https://lore.kernel.org/r/20231101-module_relocations-v9-3-8dfa3483c400@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Add all final module relocations and add error logs explaining the ones
that are not supported. Implement overflow checks for
ADD/SUB/SET/ULEB128 relocations.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Link: https://lore.kernel.org/r/20231101-module_relocations-v9-2-8dfa3483c400@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
With the C-extension regular 32bit instructions are not
necessarily aligned on 4-byte boundaries. RISC-V instructions
are in fact an ordered list of 16bit little-endian
"parcels", so access the instruction as such.
This should also make the code work in case someone builds
a big-endian RISC-V machine.
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Link: https://lore.kernel.org/r/20231101-module_relocations-v9-1-8dfa3483c400@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
When calculating the pfn for the iitlbt/idtlbt instruction, do not
drop the upper 5 address bits. This doesn't seem to have an effect
on physical hardware which uses less physical address bits, but in
qemu the missing bits are visible.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org>
|
|
The cache ops are also used by the pmem code which is unconditionally
built into the kernel. Move them into a separate file that is built
based on the correct config option.
Fixes: fd962781270e ("riscv: RISCV_NONSTANDARD_CACHE_OPS shouldn't depend on RISCV_DMA_NONCOHERENT")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> #
Link: https://lore.kernel.org/r/20231028155101.1039049-1-hch@lst.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
The driver used to truncate several 64-bit registers such as PMCEID[n]
registers used to describe whether architectural and microarchitectural
events in range 0x4000-0x401f exist. Due to discarding the bits, the
driver made the events invisible, even if they existed.
Moreover, PMCCFILTR and PMCR registers have additional bits in the upper
32 bits. This patch makes them available although they aren't currently
used. Finally, functions handling PMXEVCNTR and PMXEVTYPER registers are
removed as they not being used at all.
Fixes: df29ddf4f04b ("arm64: perf: Abstract system register accesses away")
Reported-by: Carl Worth <carl@os.amperecomputing.com>
Signed-off-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Acked-by: Will Deacon <will@kernel.org>
Closes: https://lore.kernel.org/..
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20231102183012.1251410-1-ilkka@os.amperecomputing.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
>From a W=1 build:
>> arch/powerpc/kernel/rtas-proc.c:771: warning: Function parameter or member 'm' not described in
>> 'ppc_rtas_rmo_buf_show'
>> arch/powerpc/kernel/rtas-proc.c:771: warning: Function parameter or member 'v' not described in
>> 'ppc_rtas_rmo_buf_show'
Add the missing parameter descriptions.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202309211645.1Lvwmbv4-lkp@intel.com/
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231106-rtas-trivial-v1-2-61847655c51f@linux.ibm.com
|
|
>From a W=1 build:
>> arch/powerpc/platforms/pseries/rtas-work-area.c:189: warning: Function parameter or member 'limit' not
>> described in 'rtas_work_area_reserve_arena'
Add the missing description of the limit parameter.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202309131221.Bm1pg96n-lkp@intel.com/
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231106-rtas-trivial-v1-1-61847655c51f@linux.ibm.com
|
|
This adds a separate segment for kernel text in /proc/kcore, which has a
different address than the direct linear map.
Signed-off-by: Andreas Schwab <schwab@suse.de>
Link: https://lore.kernel.org/r/mvmh6m758ao.fsf@suse.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- the old V4L2 core videobuf kAPI was finally removed. All media
drivers should now be using VB2 kAPI
- new automotive driver: mgb4
- new platform video driver: npcm-video
- new sensor driver: mt9m114
- new TI driver used in conjunction with Cadence CSI2RX IP to bridge
TI-specific parts
- ir-rx51 was removed and the N900 DT binding was moved to the
pwm-ir-tx generic driver
- drop atomisp-specific ov5693, using the upstream driver instead
- the camss driver has gained RDI3 support for VFE 17x
- the atomisp driver now detects ISP2400 or ISP2401 at run time. No
need to set it up at build time anymore
- lots of driver fixes, cleanups and improvements
* tag 'media/v6.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (377 commits)
media: nuvoton: VIDEO_NPCM_VCD_ECE should depend on ARCH_NPCM
media: venus: Fix firmware path for resources
media: venus: hfi_cmds: Replace one-element array with flex-array member and use __counted_by
media: venus: hfi_parser: Add check to keep the number of codecs within range
media: venus: hfi: add checks to handle capabilities from firmware
media: venus: hfi: fix the check to handle session buffer requirement
media: venus: hfi: add checks to perform sanity on queue pointers
media: platform: cadence: select MIPI_DPHY dependency
media: MAINTAINERS: Fix path for J721E CSI2RX bindings
media: cec: meson: always include meson sub-directory in Makefile
media: videobuf2: Fix IS_ERR checking in vb2_dc_put_userptr()
media: platform: mtk-mdp3: fix uninitialized variable in mdp_path_config()
media: mediatek: vcodec: using encoder device to alloc/free encoder memory
media: imx-jpeg: notify source chagne event when the first picture parsed
media: cx231xx: Use EP5_BUF_SIZE macro
media: siano: Drop unnecessary error check for debugfs_create_dir/file()
media: mediatek: vcodec: Handle invalid encoder vsi
media: aspeed: Drop unnecessary error check for debugfs_create_file()
Documentation: media: buffer.rst: fix V4L2_BUF_FLAG_PREPARED
Documentation: media: gen-errors.rst: fix confusing ENOTTY description
...
|
|
Some data were incorrectly annotated with SYM_FUNC_*() instead of
SYM_DATA_*() ones. Use the correct ones.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20231024132655.730417-4-cleger@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
ENTRY()/END()/WEAK() macros are deprecated and we should make use of the
new SYM_*() macros [1] for better annotation of symbols. Replace the
deprecated ones with the new ones and fix wrong usage of END()/ENDPROC()
to correctly describe the symbols.
[1] https://docs.kernel.org/core-api/asm-annotations.html
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20231024132655.730417-3-cleger@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
For the sake of coherency, use local labels in assembly when
applicable. This also avoid kprobes being confused when applying a
kprobe since the size of function is computed by checking where the
next visible symbol is located. This might end up in computing some
function size to be way shorter than expected and thus failing to apply
kprobes to the specified offset.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20231024132655.730417-2-cleger@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
When flashing loader.bin for K210 using kflash:
[ERROR] This is an ELF file and cannot be programmed to flash directly: arch/riscv/boot/loader.bin
Before, loader.bin relied on "OBJCOPYFLAGS := -O binary" in the main
RISC-V Makefile to create a boot image with the right format. With this
removed, the image is now created in the wrong (ELF) format.
Fix this by adding an explicit rule.
Fixes: 505b02957e74f0c5 ("riscv: Remove duplicate objcopy flag")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/1086025809583809538dfecaa899892218f44e7e.1698159066.git.geert+renesas@glider.be
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Alexandre Ghiti <alexghiti@rivosinc.com> says:
This series optimizes the tlb flushes on riscv which used to simply
flush the whole tlb whatever the size of the range to flush or the size
of the stride.
Patch 3 introduces a threshold that is microarchitecture specific and
will very likely be modified by vendors, not sure though which mechanism
we'll use to do that (dt? alternatives? vendor initialization code?).
* b4-shazam-merge:
riscv: Improve flush_tlb_kernel_range()
riscv: Make __flush_tlb_range() loop over pte instead of flushing the whole tlb
riscv: Improve flush_tlb_range() for hugetlb pages
riscv: Improve tlb_flush()
Link: https://lore.kernel.org/r/20231030133027.19542-1-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
This function used to simply flush the whole tlb of all harts, be more
subtile and try to only flush the range.
The problem is that we can only use PAGE_SIZE as stride since we don't know
the size of the underlying mapping and then this function will be improved
only if the size of the region to flush is < threshold * PAGE_SIZE.
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # On RZ/Five SMARC
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Tested-by: Samuel Holland <samuel.holland@sifive.com>
Link: https://lore.kernel.org/r/20231030133027.19542-5-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
Linus Torvalds
Xiao Wang
Kevin Brodsky
Palmer Dabbelt
Zhang Rui
Anup Patel
Rick Edgecombe
Douglas Anderson
Alexandre Ghiti
Hengqi Chen
Huacai Chen
WANG Rui
Nathan Chancellor
Evan Green
Charlie Jenkins
Emil Renner Berthing
Helge Deller
Christoph Hellwig
Ilkka Koskinen
Nathan Lynch
Andreas Schwab
Clément Léger
Geert Uytterhoeven
