| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
* acpi-cppc:
ACPI: CPPC: Fix access width used for PCC registers
ACPI: CPPC: Fix bit_offset shift in MASK_VAL() macro
|
|
Commit 073237281a50 ("ACPI: PM: s2idle: Enable Low-Power S0 Idle MSFT
UUID for non-AMD systems") attempted to avoid evaluating the same Low-
Power S0 Idle _DSM functions for different UUIDs, but that turns out to
be a mistake, because some systems in the field are adversely affected
by it.
Address this by allowing all Low-Power S0 Idle _DSM functions to be
evaluated, but still print the message regarding duplication of Low-
Power S0 Idle _DSM function sets for different UUIDs.
Fixes: 073237281a50 ("ACPI: PM: s2idle: Enable Low-Power S0 Idle MSFT UUID for non-AMD systems")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218750
Reported-and-tested-by: Mark Pearson <mpearson@lenovo.com>
Suggested-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
|
|
commit 2f4a4d63a193 ("ACPI: CPPC: Use access_width over bit_width for system
memory accesses") modified cpc_read()/cpc_write() to use access_width to
read CPC registers.
However, for PCC registers the access width field in the ACPI register
macro specifies the PCC subspace ID. For non-zero PCC subspace ID it is
incorrectly treated as access width. This causes errors when reading
from PCC registers in the CPPC driver.
For PCC registers, base the size of read/write on the bit width field.
The debug message in cpc_read()/cpc_write() is updated to print relevant
information for the address space type used to read the register.
Fixes: 2f4a4d63a193 ("ACPI: CPPC: Use access_width over bit_width for system memory accesses")
Signed-off-by: Vanshidhar Konda <vanshikonda@os.amperecomputing.com>
Tested-by: Jarred White <jarredwhite@linux.microsoft.com>
Reviewed-by: Jarred White <jarredwhite@linux.microsoft.com>
Reviewed-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Cc: 5.15+ <stable@vger.kernel.org> # 5.15+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Commit 2f4a4d63a193 ("ACPI: CPPC: Use access_width over bit_width for
system memory accesses") neglected to properly wrap the bit_offset shift
when it comes to applying the mask. This may cause incorrect values to be
read and may cause the cpufreq module not be loaded.
[ 11.059751] cpu_capacity: CPU0 missing/invalid highest performance.
[ 11.066005] cpu_capacity: partial information: fallback to 1024 for all CPUs
Also, corrected the bitmask generation in GENMASK (extra bit being added).
Fixes: 2f4a4d63a193 ("ACPI: CPPC: Use access_width over bit_width for system memory accesses")
Signed-off-by: Jarred White <jarredwhite@linux.microsoft.com>
Cc: 5.15+ <stable@vger.kernel.org> # 5.15+
Reviewed-by: Vanshidhar Konda <vanshikonda@os.amperecomputing.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
On the Toshiba Encore WT10-A tablet the BATC battery ACPI device depends
on 3 other devices:
Name (_DEP, Package (0x03) // _DEP: Dependencies
{
I2C1,
GPO2,
GPO0
})
acpi_scan_check_dep() adds all 3 of these to the acpi_dep_list and then
before an acpi_device is created for the BATC handle (and thus before
acpi_scan_dep_init() runs) acpi_scan_clear_dep() gets called for both
GPIO depenencies, with free_when_met not set for the dependencies.
Since there is no adev for BATC yet, there also is no dep_unmet to
decrement. The only result of acpi_scan_clear_dep() in this case is
dep->met getting set.
Soon after acpi_scan_clear_dep() has been called for the GPIO dependencies
the acpi_device gets created for the BATC handle and acpi_scan_dep_init()
runs, this sees 3 dependencies on the acpi_dep_list and initializes
unmet_dep to 3. Later when the dependency for I2C1 is met unmet_dep
becomes 2, but since the 2 GPIO deps where already met it never becomes 0
causing battery monitoring to not work.
Fix this by modifying acpi_scan_dep_init() to not increase dep_met for
dependencies which have already been marked as being met.
Fixes: 3ba12d8de3fa ("ACPI: scan: Reduce overhead related to devices with dependencies")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Cc: 6.5+ <stable@vger.kernel.org> # 6.5+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Some laptops where the thermal control is handled by the EC may
provide trip points that fail the kernels new validation, but still have
working temperature sensors. An example of this is the Framework 13 AMD.
This patch allows the thermal zone to still be registered without trip
points if the trip points fail validation, allowing the temperature
sensor to be viewed and used by the user.
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218586
Fixes: 9c8647224e9f ("ACPI: thermal: Use library functions to obtain trip point temperature values")
Signed-off-by: Stephen Horvath <s.horvath@outlook.com.au>
[ rjw: Subject edits, remove redundant braces ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
* acpica:
ACPICA: debugger: check status of acpi_evaluate_object() in acpi_db_walk_for_fields()
|
|
acpi_db_walk_for_fields()
ACPICA commit 9061cd9aa131205657c811a52a9f8325a040c6c9
Errors in acpi_evaluate_object() can lead to incorrect state of buffer.
This can lead to access to data in previously ACPI_FREEd buffer and
secondary ACPI_FREE to the same buffer later.
Handle errors in acpi_evaluate_object the same way it is done earlier
with acpi_ns_handle_to_pathname.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Link: https://github.com/acpica/acpica/commit/9061cd9a
Fixes: 5fd033288a86 ("ACPICA: debugger: add command to dump all fields of particular subtype")
Signed-off-by: Nikita Kiryushin <kiryushin@ancud.ru>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The remove callback of a device is called whenever it is unbound,
which may happen during runtime e.g. through sysfs, so this is not
allowed to be dropped from the binary:
WARNING: modpost: vmlinux: section mismatch in reference: einj_driver+0x8 (section: .data) -> einj_remove (section: .exit.text)
ERROR: modpost: Section mismatches detected.
Remove that annotation.
Fixes: 12fb28ea6b1c ("EINJ: Add CXL error type support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- Support for various vector-accelerated crypto routines
- Hibernation is now enabled for portable kernel builds
- mmap_rnd_bits_max is larger on systems with larger VAs
- Support for fast GUP
- Support for membarrier-based instruction cache synchronization
- Support for the Andes hart-level interrupt controller and PMU
- Some cleanups around unaligned access speed probing and Kconfig
settings
- Support for ACPI LPI and CPPC
- Various cleanus related to barriers
- A handful of fixes
* tag 'riscv-for-linus-6.9-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (66 commits)
riscv: Fix syscall wrapper for >word-size arguments
crypto: riscv - add vector crypto accelerated AES-CBC-CTS
crypto: riscv - parallelize AES-CBC decryption
riscv: Only flush the mm icache when setting an exec pte
riscv: Use kcalloc() instead of kzalloc()
riscv/barrier: Add missing space after ','
riscv/barrier: Consolidate fence definitions
riscv/barrier: Define RISCV_FULL_BARRIER
riscv/barrier: Define __{mb,rmb,wmb}
RISC-V: defconfig: Enable CONFIG_ACPI_CPPC_CPUFREQ
cpufreq: Move CPPC configs to common Kconfig and add RISC-V
ACPI: RISC-V: Add CPPC driver
ACPI: Enable ACPI_PROCESSOR for RISC-V
ACPI: RISC-V: Add LPI driver
cpuidle: RISC-V: Move few functions to arch/riscv
riscv: Introduce set_compat_task() in asm/compat.h
riscv: Introduce is_compat_thread() into compat.h
riscv: add compile-time test into is_compat_task()
riscv: Replace direct thread flag check with is_compat_task()
riscv: Improve arch_get_mmap_end() macro
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Generate a list of built DTB files (arch/*/boot/dts/dtbs-list)
- Use more threads when building Debian packages in parallel
- Fix warnings shown during the RPM kernel package uninstallation
- Change OBJECT_FILES_NON_STANDARD_*.o etc. to take a relative path to
Makefile
- Support GCC's -fmin-function-alignment flag
- Fix a null pointer dereference bug in modpost
- Add the DTB support to the RPM package
- Various fixes and cleanups in Kconfig
* tag 'kbuild-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (67 commits)
kconfig: tests: test dependency after shuffling choices
kconfig: tests: add a test for randconfig with dependent choices
kconfig: tests: support KCONFIG_SEED for the randconfig runner
kbuild: rpm-pkg: add dtb files in kernel rpm
kconfig: remove unneeded menu_is_visible() call in conf_write_defconfig()
kconfig: check prompt for choice while parsing
kconfig: lxdialog: remove unused dialog colors
kconfig: lxdialog: fix button color for blackbg theme
modpost: fix null pointer dereference
kbuild: remove GCC's default -Wpacked-bitfield-compat flag
kbuild: unexport abs_srctree and abs_objtree
kbuild: Move -Wenum-{compare-conditional,enum-conversion} into W=1
kconfig: remove named choice support
kconfig: use linked list in get_symbol_str() to iterate over menus
kconfig: link menus to a symbol
kbuild: fix inconsistent indentation in top Makefile
kbuild: Use -fmin-function-alignment when available
alpha: merge two entries for CONFIG_ALPHA_GAMMA
alpha: merge two entries for CONFIG_ALPHA_EV4
kbuild: change DTC_FLAGS_<basetarget>.o to take the path relative to $(obj)
...
|
|
Add cpufreq driver based on ACPI CPPC for RISC-V. The driver uses either
SBI CPPC interfaces or the CSRs to access the CPPC registers as defined
by the RISC-V FFH spec.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20240208034414.22579-2-sunilvl@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
The ACPI processor driver is not currently enabled for RISC-V.
This is required to enable CPU related functionalities like
LPI and CPPC. Hence, enable ACPI_PROCESSOR for RISC-V.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20240118062930.245937-4-sunilvl@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Enable Low Power Idle (LPI) based cpuidle driver for RISC-V platforms.
It depends on SBI HSM calls for idle state transitions.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20240118062930.245937-3-sunilvl@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more ACPI updates from Rafael Wysocki:
"These update ACPI documentation and kerneldoc comments.
Specifics:
- Add markup to generate links from footnotes in the ACPI enumeration
document (Chris Packham)
- Update the handle_eject_request() kerneldoc comment to document the
arguments of the function and improve kerneldoc comments for ACPI
suspend and hibernation functions (Yang Li)"
* tag 'acpi-6.9-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: PM: Improve kerneldoc comments for suspend and hibernation functions
ACPI: docs: enumeration: Make footnotes links
ACPI: Document handle_eject_request() arguments
|
|
Pull CXL updates from Dan Williams:
"CXL has mechanisms to enumerate the performance characteristics of
memory devices. Those mechanisms allow Linux to build the equivalent
of ACPI SRAT, SLIT, and HMAT tables dynamically at runtime. That
capability is necessary because static ACPI can not represent dynamic
CXL configurations (and reconfigurations).
So, building on the v6.8 work to add "Quality of Service" enumeration,
this update plumbs CXL "access coordinates" (read/write access latency
and bandwidth) in all the same places that ACPI HMAT feeds similar
data. Follow-on patches from the -mm side can then use that data to
feed mechanisms like mm/memory-tiers.c. Greg has acked the touch to
drivers/base/.
The other feature update this cycle is support for CXL error injection
via the ACPI EINJ module. That facility enables injection of bus
protocol errors provided the user knows the magic address values to
insert in the interface. To hide that magic, and make this easier to
use, new error injection attributes were added to CXL debugfs. That
interface injects the errors relative to a CXL object rather than
require user tooling to know how to lookup and inject RCRB (Root
Complex Register Block) addresses into the raw EINJ debugfs interface.
It received some helpful review comments from Tony, but no explicit
acks from the ACPI side. The primary user visible change for existing
EINJ users is that they may find that einj.ko was already loaded by
cxl_core.ko. Previously, einj.ko was only loaded on demand.
The usual collection of miscellaneous cleanups are also present this
cycle.
Summary:
- Supplement ACPI HMAT reported memory performance with native CXL
memory performance enumeration
- Add support for CXL error injection via the ACPI EINJ mechanism
- Cleanup CXL DOE and CDAT integration
- Miscellaneous cleanups and fixes"
* tag 'cxl-for-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (21 commits)
Documentation/ABI/testing/debugfs-cxl: Fix "Unexpected indentation"
lib/firmware_table: Provide buffer length argument to cdat_table_parse()
cxl/pci: Get rid of pointer arithmetic reading CDAT table
cxl/pci: Rename DOE mailbox handle to doe_mb
cxl: Fix the incorrect assignment of SSLBIS entry pointer initial location
cxl/core: Add CXL EINJ debugfs files
EINJ, Documentation: Update EINJ kernel doc
EINJ: Add CXL error type support
EINJ: Migrate to a platform driver
cxl/region: Deal with numa nodes not enumerated by SRAT
cxl/region: Add memory hotplug notifier for cxl region
cxl/region: Add sysfs attribute for locality attributes of CXL regions
cxl/region: Calculate performance data for a region
cxl: Set cxlmd->endpoint before adding port device
cxl: Move QoS class to be calculated from the nearest CPU
cxl: Split out host bridge access coordinates
cxl: Split out combine_coordinates() for common shared usage
ACPI: HMAT / cxl: Add retrieval of generic port coordinates for both access classes
ACPI: HMAT: Introduce 2 levels of generic port access class
base/node / ACPI: Enumerate node access class for 'struct access_coordinate'
...
|
|
This patch enhances the documentation for the ACPI power management
functions related to system suspend and hibernation.
This includes the use of kernel-doc style comments which provide
developers with clearer guidance on the usage and expectations of
these functions.
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
[ rjw: Subject edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"This was a relatively calm development cycle. Most of changes are
rather small device-specific fixes and enhancements. The only
significant changes in ALSA core are code refactoring with the recent
cleanup infrastructure, which should bring no functionality changes.
Some highlights below:
Core:
- Lots of cleanups in ALSA core code with automatic kfree cleanup and
locking guard macros
- New ALSA core kunit test
ASoC:
- SoundWire support for AMD ACP 6.3 systems
- Support for reporting version information for AVS firmware
- Support DSPless mode for Intel Soundwire systems
- Support for configuring CS35L56 amplifiers using EFI calibration
data
- Log which component is being operated on as part of power
management trace events.
- Support for Microchip SAM9x7, NXP i.MX95 and Qualcomm WCD939x
HD- and USB-audio:
- More Cirrus HD-audio codec support
- TAS2781 HD-audio codec fixes
- Scarlett2 mixer fixes
Others:
- Enhancement of virtio driver for audio control supports
- Cleanups of legacy PM code with new macros
- Firewire sound updates"
* tag 'sound-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (307 commits)
ALSA: usb-audio: Stop parsing channels bits when all channels are found.
ALSA: hda/tas2781: remove unnecessary runtime_pm calls
ALSA: hda/realtek - ALC236 fix volume mute & mic mute LED on some HP models
ALSA: aaci: Delete unused variable in aaci_do_suspend
ALSA: scarlett2: Fix Scarlett 4th Gen input gain range again
ALSA: scarlett2: Fix Scarlett 4th Gen input gain range
ALSA: scarlett2: Fix Scarlett 4th Gen autogain status values
ALSA: scarlett2: Fix Scarlett 4th Gen 4i4 low-voltage detection
ALSA: hda/tas2781: restore power state after system_resume
ALSA: hda/tas2781: do not call pm_runtime_force_* in system_resume/suspend
ALSA: hda/tas2781: do not reset cur_* values in runtime_suspend
ALSA: hda/tas2781: add lock to system_suspend
ALSA: hda/tas2781: use dev_dbg in system_resume
ALSA: hda/realtek: fix ALC285 issues on HP Envy x360 laptops
platform/x86: serial-multi-instantiate: Add support for CS35L54 and CS35L57
ALSA: hda: cs35l56: Add support for CS35L54 and CS35L57
ASoC: cs35l56: Add support for CS35L54 and CS35L57
ASoC: Intel: catpt: Carefully use PCI bitwise constants
ALSA: hda: hda_component: Include sound/hda_codec.h
ALSA: hda: hda_component: Add missing #include guards
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Consolidate interrupt related code in irq.c (Ilpo Järvinen)
- Reduce kernel size by replacing sysfs resource macros with
functions (Ilpo Järvinen)
- Reduce kernel size by compiling sysfs support only when
CONFIG_SYSFS=y (Lukas Wunner)
- Avoid using Extended Tags on 3ware-9650SE Root Port to work around
an apparent hardware defect (Jörg Wedekind)
Resource management:
- Fix an MMIO mapping leak in pci_iounmap() (Philipp Stanner)
- Move pci_iomap.c and other PCI-specific devres code to drivers/pci
(Philipp Stanner)
- Consolidate PCI devres code in devres.c (Philipp Stanner)
Power management:
- Avoid D3cold on Asus B1400 PCI-NVMe bridge, where firmware doesn't
know how to return correctly to D0, and remove previous quirk that
wasn't as specific (Daniel Drake)
- Allow runtime PM when the driver enables it but doesn't need any
runtime PM callbacks (Raag Jadav)
- Drain runtime-idle callbacks before driver removal to avoid races
between .remove() and .runtime_idle(), which caused intermittent
page faults when the rtsx .runtime_idle() accessed registers that
its .remove() had already unmapped (Rafael J. Wysocki)
Virtualization:
- Avoid Secondary Bus Reset on LSI FW643 so it can be assigned to VMs
with VFIO, e.g., for professional audio software on many Apple
machines, at the cost of leaking state between VMs (Edmund Raile)
Error handling:
- Print all logged TLP Prefixes, not just the first, after AER or DPC
errors (Ilpo Järvinen)
- Quirk the DPC PIO log size for Intel Raptor Lake Root Ports, which
still don't advertise a legal size (Paul Menzel)
- Ignore expected DPC Surprise Down errors on hot removal (Smita
Koralahalli)
- Block runtime suspend while handling AER errors to avoid races that
prevent the device form being resumed from D3hot (Stanislaw
Gruszka)
Peer-to-peer DMA:
- Use atomic XA allocation in RCU read section (Christophe JAILLET)
ASPM:
- Collect bits of ASPM-related code that we need even without
CONFIG_PCIEASPM into aspm.c (David E. Box)
- Save/restore L1 PM Substates config for suspend/resume (David E.
Box)
- Update save_save when ASPM config is changed, so a .slot_reset()
during error recovery restores the changed config, not the
.probe()-time config (Vidya Sagar)
Endpoint framework:
- Refactor and improve pci_epf_alloc_space() API (Niklas Cassel)
- Clean up endpoint BAR descriptions (Niklas Cassel)
- Fix ntb_register_device() name leak in error path (Yang Yingliang)
- Return actual error code for pci_vntb_probe() failure (Yang
Yingliang)
Broadcom STB PCIe controller driver:
- Fix MDIO write polling, which previously never waited for
completion (Jonathan Bell)
Cadence PCIe endpoint driver:
- Clear the ARI "Next Function Number" of last function (Jasko-EXT
Wojciech)
Freescale i.MX6 PCIe controller driver:
- Simplify by replacing switch statements with function pointers for
different hardware variants (Frank Li)
- Simplify by using clk_bulk*() API (Frank Li)
- Remove redundant DT clock and reg/reg-name details (Frank Li)
- Add i.MX95 DT and driver support for both Root Complex and Endpoint
mode (Frank Li)
Microsoft Hyper-V host bridge driver:
- Reduce memory usage by limiting ring buffer size to 16KB instead of
4 pages (Michael Kelley)
Qualcomm PCIe controller driver:
- Add X1E80100 DT and driver support (Abel Vesa)
- Add DT 'required-opps' for SoCs that require a minimum performance
level (Johan Hovold)
- Make DT 'msi-map-mask' optional, depending on how MSI interrupts
are mapped (Johan Hovold)
- Disable ASPM L0s for sc8280xp, sa8540p and sa8295p because the PHY
configuration isn't tuned correctly for L0s (Johan Hovold)
- Split dt-binding qcom,pcie.yaml into qcom,pcie-common.yaml and
separate files for SA8775p, SC7280, SC8180X, SC8280XP, SM8150,
SM8250, SM8350, SM8450, SM8550 for easier reviewing (Krzysztof
Kozlowski)
- Enable BDF to SID translation by disabling bypass mode (Manivannan
Sadhasivam)
- Add endpoint MHI support for Snapdragon SA8775P SoC (Mrinmay
Sarkar)
Synopsys DesignWare PCIe controller driver:
- Allocate 64-bit MSI address if no 32-bit address is available (Ajay
Agarwal)
- Fix endpoint Resizable BAR to actually advertise the required 1MB
size (Niklas Cassel)
MicroSemi Switchtec management driver:
- Release resources if the .probe() fails (Christophe JAILLET)
Miscellaneous:
- Make pcie_port_bus_type const (Ricardo B. Marliere)"
* tag 'pci-v6.9-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (77 commits)
PCI/ASPM: Update save_state when configuration changes
PCI/ASPM: Disable L1 before configuring L1 Substates
PCI/ASPM: Call pci_save_ltr_state() from pci_save_pcie_state()
PCI/ASPM: Save L1 PM Substates Capability for suspend/resume
PCI: hv: Fix ring buffer size calculation
PCI: dwc: endpoint: Fix advertised resizable BAR size
PCI: cadence: Clear the ARI Capability Next Function Number of the last function
PCI: dwc: Strengthen the MSI address allocation logic
PCI: brcmstb: Fix broken brcm_pcie_mdio_write() polling
PCI: qcom: Add X1E80100 PCIe support
dt-bindings: PCI: qcom: Document the X1E80100 PCIe Controller
PCI: qcom: Enable BDF to SID translation properly
PCI/AER: Generalize TLP Header Log reading
PCI/AER: Use explicit register size for PCI_ERR_CAP
PCI: qcom: Disable ASPM L0s for sc8280xp, sa8540p and sa8295p
dt-bindings: PCI: qcom: Do not require 'msi-map-mask'
dt-bindings: PCI: qcom: Allow 'required-opps'
PCI/AER: Block runtime suspend when handling errors
PCI/ASPM: Move pci_save_ltr_state() to aspm.c
PCI/ASPM: Always build aspm.c
...
|
|
Add argument descriptions to the handle_eject_request() kerneldoc
comment.
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control updates from Rafael Wysocki:
"These mostly change the thermal core in a few ways allowing thermal
drivers to be simplified, in particular in their removal and failing
probe handling parts that are notoriously prone to errors, and
propagate the changes to several drivers.
Apart from that, support for a new platform is added (Intel Lunar
Lake-M), some bugs are fixed and some code is cleaned up, as usual.
Specifics:
- Store zone trips table and zone operations directly in struct
thermal_zone_device (Rafael Wysocki)
- Fix up flex array initialization during thermal zone device
registration (Nathan Chancellor)
- Rework writable trip points handling in the thermal core and
several drivers (Rafael Wysocki)
- Thermal core code cleanups (Dan Carpenter, Flavio Suligoi)
- Use thermal zone accessor functions in the int340x Intel thermal
driver (Rafael Wysocki)
- Add Lunar Lake-M PCI ID to the int340x Intel thermal driver
(Srinivas Pandruvada)
- Minor fixes for thermal governors (Rafael Wysocki, Di Shen)
- Trip point handling fixes for the iwlwifi wireless driver (Rafael
Wysocki)
- Code cleanups (Rafael J. Wysocki, AngeloGioacchino Del Regno)"
* tag 'thermal-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (29 commits)
thermal: core: remove unnecessary check in trip_point_hyst_store()
thermal: intel: int340x_thermal: Use thermal zone accessor functions
thermal: core: Remove excess empty line from a comment
thermal: int340x: processor_thermal: Add Lunar Lake-M PCI ID
thermal: core: Eliminate writable trip points masks
thermal: of: Set THERMAL_TRIP_FLAG_RW_TEMP directly
thermal: imx: Set THERMAL_TRIP_FLAG_RW_TEMP directly
wifi: iwlwifi: mvm: Set THERMAL_TRIP_FLAG_RW_TEMP directly
mlxsw: core_thermal: Set THERMAL_TRIP_FLAG_RW_TEMP directly
thermal: intel: Set THERMAL_TRIP_FLAG_RW_TEMP directly
thermal: core: Drop the .set_trip_hyst() thermal zone operation
thermal: core: Add flags to struct thermal_trip
thermal: core: Move initial num_trips assignment before memcpy()
thermal: Get rid of CONFIG_THERMAL_WRITABLE_TRIPS
thermal: intel: Adjust ops handling during thermal zone registration
thermal: ACPI: Constify acpi_thermal_zone_ops
thermal: core: Store zone ops in struct thermal_zone_device
thermal: intel: Discard trip tables after zone registration
thermal: ACPI: Discard trips table after zone registration
thermal: core: Store zone trips table in struct thermal_zone_device
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These modify the ACPI device events and processor enumeration code to
take the 'enabled' _STA bit into account as mandated by the ACPI
specification, convert several platform drivers to using a remove
callback that returns void, add some new quirks for ACPI IRQ override
and other things, address assorted issues and clean up code.
Specifics:
- Rearrange Device Check and Bus Check notification handling in the
ACPI device hotplug code to make it get the "enabled" _STA bit into
account (Rafael Wysocki)
- Modify acpi_processor_add() to skip processors with the "enabled"
_STA bit clear, as per the specification (Rafael Wysocki)
- Stop failing Device Check notification handling without a valid
reason (Rafael Wysocki)
- Defer enumeration of devices that depend on a device with an ACPI
device ID equalt to INTC10CF to address probe ordering issues on
some platforms (Wentong Wu)
- Constify acpi_bus_type (Ricardo Marliere)
- Make the ACPI-specific suspend-to-idle code take the Low-Power S0
Idle MSFT UUID into account on non-AMD systems (Rafael Wysocki)
- Add ACPI IRQ override quirks for some new platforms (Sergey
Kalinichev, Maxim Kudinov, Alexey Froloff, Sviatoslav Harasymchuk,
Nicolas Haye)
- Make the NFIT parsing code use acpi_evaluate_dsm_typed() (Andy
Shevchenko)
- Fix a memory leak in acpi_processor_power_exit() (Armin Wolf)
- Make it possible to quirk the CSI-2 and MIPI DisCo for Imaging
properties parsing and add a quirk for Dell XPS 9315 (Sakari Ailus)
- Prevent false-positive static checker warnings from triggering by
intializing some variables in the ACPI thermal code to zero (Colin
Ian King)
- Add DELL0501 handling to acpi_quirk_skip_serdev_enumeration() and
make that function generic (Hans de Goede)
- Make the ACPI backlight code handle fetching EDID that is longer
than 256 bytes (Mario Limonciello)
- Skip initialization of GHES_ASSIST structures for Machine Check
Architecture in APEI (Avadhut Naik)
- Convert several plaform drivers in the ACPI subsystem to using a
remove callback that returns void (Uwe Kleine-König)
- Drop the long-deprecated custom_method debugfs interface that is
problematic from the security standpoint (Rafael Wysocki)
- Use %pe in a couple of places in the ACPI code for easier error
decoding (Onkarnath)
- Fix register width information handling during system memory
accesses in the ACPI CPPC library (Jarred White)
- Add AMD CPPC V2 support for family 17h processors to the ACPI CPPC
library (Perry Yuan)"
* tag 'acpi-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (35 commits)
ACPI: resource: Use IRQ override on Maibenben X565
ACPI: CPPC: Use access_width over bit_width for system memory accesses
ACPI: CPPC: enable AMD CPPC V2 support for family 17h processors
ACPI: APEI: Skip initialization of GHES_ASSIST structures for Machine Check Architecture
ACPI: scan: Consolidate Device Check and Bus Check notification handling
ACPI: scan: Rework Device Check and Bus Check notification handling
ACPI: scan: Make acpi_processor_add() check the device enabled bit
ACPI: scan: Relocate acpi_bus_trim_one()
ACPI: scan: Fix device check notification handling
ACPI: resource: Add MAIBENBEN X577 to irq1_edge_low_force_override
ACPI: pfr_update: Convert to platform remove callback returning void
ACPI: pfr_telemetry: Convert to platform remove callback returning void
ACPI: fan: Convert to platform remove callback returning void
ACPI: GED: Convert to platform remove callback returning void
ACPI: DPTF: Convert to platform remove callback returning void
ACPI: AGDI: Convert to platform remove callback returning void
ACPI: TAD: Convert to platform remove callback returning void
ACPI: APEI: GHES: Convert to platform remove callback returning void
ACPI: property: Polish ignoring bad data nodes
ACPI: thermal_lib: Initialize temp_decik to zero
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"From the functional perspective, the most significant change here is
the addition of support for Energy Models that can be updated
dynamically at run time.
There is also the addition of LZ4 compression support for hibernation,
the new preferred core support in amd-pstate, new platforms support in
the Intel RAPL driver, new model-specific EPP handling in intel_pstate
and more.
Apart from that, the cpufreq default transition delay is reduced from
10 ms to 2 ms (along with some related adjustments), the system
suspend statistics code undergoes a significant rework and there is a
usual bunch of fixes and code cleanups all over.
Specifics:
- Allow the Energy Model to be updated dynamically (Lukasz Luba)
- Add support for LZ4 compression algorithm to the hibernation image
creation and loading code (Nikhil V)
- Fix and clean up system suspend statistics collection (Rafael
Wysocki)
- Simplify device suspend and resume handling in the power management
core code (Rafael Wysocki)
- Fix PCI hibernation support description (Yiwei Lin)
- Make hibernation take set_memory_ro() return values into account as
appropriate (Christophe Leroy)
- Set mem_sleep_current during kernel command line setup to avoid an
ordering issue with handling it (Maulik Shah)
- Fix wake IRQs handling when pm_runtime_force_suspend() is used as a
driver's system suspend callback (Qingliang Li)
- Simplify pm_runtime_get_if_active() usage and add a replacement for
pm_runtime_put_autosuspend() (Sakari Ailus)
- Add a tracepoint for runtime_status changes tracking (Vilas Bhat)
- Fix section title markdown in the runtime PM documentation (Yiwei
Lin)
- Enable preferred core support in the amd-pstate cpufreq driver
(Meng Li)
- Fix min_perf assignment in amd_pstate_adjust_perf() and make the
min/max limit perf values in amd-pstate always stay within the
(highest perf, lowest perf) range (Tor Vic, Meng Li)
- Allow intel_pstate to assign model-specific values to strings used
in the EPP sysfs interface and make it do so on Meteor Lake
(Srinivas Pandruvada)
- Drop long-unused cpudata::prev_cummulative_iowait from the
intel_pstate cpufreq driver (Jiri Slaby)
- Prevent scaling_cur_freq from exceeding scaling_max_freq when the
latter is an inefficient frequency (Shivnandan Kumar)
- Change default transition delay in cpufreq to 2ms (Qais Yousef)
- Remove references to 10ms minimum sampling rate from comments in
the cpufreq code (Pierre Gondois)
- Honour transition_latency over transition_delay_us in cpufreq (Qais
Yousef)
- Stop unregistering cpufreq cooling on CPU hot-remove (Viresh Kumar)
- General enhancements / cleanups to ARM cpufreq drivers (tianyu2,
Nícolas F. R. A. Prado, Erick Archer, Arnd Bergmann, Anastasia
Belova)
- Update cpufreq-dt-platdev to block/approve devices (Richard Acayan)
- Make the SCMI cpufreq driver get a transition delay value from
firmware (Pierre Gondois)
- Prevent the haltpoll cpuidle governor from shrinking guest
poll_limit_ns below grow_start (Parshuram Sangle)
- Avoid potential overflow in integer multiplication when computing
cpuidle state parameters (C Cheng)
- Adjust MWAIT hint target C-state computation in the ACPI cpuidle
driver and in intel_idle to return a correct value for C0 (He
Rongguang)
- Address multiple issues in the TPMI RAPL driver and add support for
new platforms (Lunar Lake-M, Arrow Lake) to Intel RAPL (Zhang Rui)
- Fix freq_qos_add_request() return value check in dtpm_cpu (Daniel
Lezcano)
- Fix kernel-doc for dtpm_create_hierarchy() (Yang Li)
- Fix file leak in get_pkg_num() in x86_energy_perf_policy (Samasth
Norway Ananda)
- Fix cpupower-frequency-info.1 man page typo (Jan Kratochvil)
- Fix a couple of warnings in the OPP core code related to W=1 builds
(Viresh Kumar)
- Move dev_pm_opp_{init|free}_cpufreq_table() to pm_opp.h (Viresh
Kumar)
- Extend dev_pm_opp_data with turbo support (Sibi Sankar)
- dt-bindings: drop maxItems from inner items (David Heidelberg)"
* tag 'pm-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (95 commits)
dt-bindings: opp: drop maxItems from inner items
OPP: debugfs: Fix warning around icc_get_name()
OPP: debugfs: Fix warning with W=1 builds
cpufreq: Move dev_pm_opp_{init|free}_cpufreq_table() to pm_opp.h
OPP: Extend dev_pm_opp_data with turbo support
Fix cpupower-frequency-info.1 man page typo
cpufreq: scmi: Set transition_delay_us
firmware: arm_scmi: Populate fast channel rate_limit
firmware: arm_scmi: Populate perf commands rate_limit
cpuidle: ACPI/intel: fix MWAIT hint target C-state computation
PM: sleep: wakeirq: fix wake irq warning in system suspend
powercap: dtpm: Fix kernel-doc for dtpm_create_hierarchy() function
cpufreq: Don't unregister cpufreq cooling on CPU hotplug
PM: suspend: Set mem_sleep_current during kernel command line setup
cpufreq: Honour transition_latency over transition_delay_us
cpufreq: Limit resolving a frequency to policy min/max
Documentation: PM: Fix runtime_pm.rst markdown syntax
cpufreq: amd-pstate: adjust min/max limit perf
cpufreq: Remove references to 10ms min sampling rate
cpufreq: intel_pstate: Update default EPPs for Meteor Lake
...
|
|
Pick up support for injecting errors via ACPI EINJ into the CXL protocol
for v6.9.
|
|
Pick up support for CXL "HMEM reporting" for v6.9, i.e. build an HMAT
from CXL CDAT and PCIe switch information.
|
|
There exist card implementations with a CDAT table using a fixed size
buffer, but with entries filled in that do not fill the whole table
length size. Then, the last entry in the CDAT table may not mark the
end of the CDAT table buffer specified by the length field in the CDAT
header. It can be shorter with trailing unused (zero'ed) data. The
actual table length is determined while reading all CDAT entries of
the table with DOE.
If the table is greater than expected (containing zero'ed trailing
data), the CDAT parser fails with:
[ 48.691717] Malformed DSMAS table length: (24:0)
[ 48.702084] [CDAT:0x00] Invalid zero length
[ 48.711460] cxl_port endpoint1: Failed to parse CDAT: -22
In addition, a check of the table buffer length is missing to prevent
an out-of-bound access then parsing the CDAT table.
Hardening code against device returning borked table. Fix that by
providing an optional buffer length argument to
acpi_parse_entries_array() that can be used by cdat_table_parse() to
propagate the buffer size down to its users to check the buffer
length. This also prevents a possible out-of-bound access mentioned.
Add a check to warn about a malformed CDAT table length.
Cc: Rafael J. Wysocki <rafael@kernel.org>
Cc: Len Brown <lenb@kernel.org>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Robert Richter <rrichter@amd.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/ZdEnopFO0Tl3t2O1@rric.localdomain
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Move CXL protocol error types from einj.c (now einj-core.c) to einj-cxl.c.
einj-cxl.c implements the necessary handling for CXL protocol error
injection and exposes an API for the CXL core to use said functionality,
while also allowing the EINJ module to be built without CXL support.
Because CXL error types targeting CXL 1.0/1.1 ports require special
handling, only allow them to be injected through the new cxl debugfs
interface (next commit) and return an error when attempting to inject
through the legacy interface.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Ben Cheatham <Benjamin.Cheatham@amd.com>
Link: https://lore.kernel.org/r/20240311142508.31717-3-Benjamin.Cheatham@amd.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Change the EINJ module to install a platform device/driver on module
init and move the module init() and exit() functions to driver probe and
remove. This change allows the EINJ module to load regardless of whether
setting up EINJ succeeds, which allows dependent modules to still load
(i.e. the CXL core).
Since EINJ may no longer be initialized when the module loads, any
functions that are called from dependent/external modules should
safegaurd against the case EINJ didn't load.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Ben Cheatham <Benjamin.Cheatham@amd.com>
Link: https://lore.kernel.org/r/20240311142508.31717-2-Benjamin.Cheatham@amd.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
For the numa nodes that are not created by SRAT, no memory_target is
allocated and is not managed by the HMAT_REPORTING code. Therefore
hmat_callback() memory hotplug notifier will exit early on those NUMA
nodes. The CXL memory hotplug notifier will need to call
node_set_perf_attrs() directly in order to setup the access sysfs
attributes.
In acpi_numa_init(), the last proximity domain (pxm) id created by SRAT is
stored. Add a helper function acpi_node_backed_by_real_pxm() in order to
check if a NUMA node id is defined by SRAT or created by CFMWS.
node_set_perf_attrs() symbol is exported to allow update of perf attribs
for a node. The sysfs path of
/sys/devices/system/node/nodeX/access0/initiators/* is created by
node_set_perf_attrs() for the various attributes where nodeX is matched
to the NUMA node of the CXL region.
Cc: Rafael J. Wysocki <rafael@kernel.org>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20240308220055.2172956-13-dave.jiang@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
When the CXL region is formed, the driver computes the performance data
for the region. However this data is not available at the node data
collection that has been populated by the HMAT during kernel
initialization. Add a memory hotplug notifier to update the access
coordinates to the 'struct memory_target' context kept by the
HMAT_REPORTING code.
Add CXL_CALLBACK_PRI for a memory hotplug callback priority. Set the
priority number to be called before HMAT_CALLBACK_PRI. The CXL update must
happen before hmat_callback().
A new HMAT_REPORTING helper hmat_update_target_coordinates() is added in
order to allow CXL to update the memory_target access coordinates.
A new ext_updated member is added to the memory_target to indicate that
the access coordinates within the memory_target has been updated by an
external agent such as CXL. This prevents data being overwritten by the
hmat_update_target_attrs() triggered by hmat_callback().
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Rafael J. Wysocki <rafael@kernel.org>
Reviewed-by: Huang, Ying <ying.huang@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20240308220055.2172956-12-dave.jiang@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
classes
Update acpi_get_genport_coordinates() to allow retrieval of both access
classes of the 'struct access_coordinate' for a generic target. The update
will allow CXL code to compute access coordinates for both access class.
Cc: Rafael J. Wysocki <rafael@kernel.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20240308220055.2172956-5-dave.jiang@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
In order to compute access0 and access1 classes for CXL memory, 2 levels
of generic port information must be stored. Access0 will indicate the
generic port access coordinates to the closest initiator and access1
will indicate the generic port access coordinates to the cloest CPU.
Cc: Rafael J. Wysocki <rafael@kernel.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20240308220055.2172956-4-dave.jiang@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Both generic node and HMAT handling code have been using magic numbers to
indicate access classes for 'struct access_coordinate'. Introduce enums to
enumerate the access0 and access1 classes shared by the two subsystems.
Update the function parameters and callers as appropriate to utilize the
new enum.
Access0 is named to ACCESS_COORDINATE_LOCAL in order to indicate that the
access class is for 'struct access_coordinate' between a target node and
the nearest initiator node.
Access1 is named to ACCESS_COORDINATE_CPU in order to indicate that the
access class is for 'struct access_coordinate' between a target node and
the nearest CPU node.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Rafael J. Wysocki <rafael@kernel.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20240308220055.2172956-3-dave.jiang@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
For generic targets, there's no reason to call
register_memory_node_under_compute_node() with the access levels that are
only visible to HMAT handling code. Only update the attributes and rename
hmat_register_generic_target_initiators() to hmat_update_generic_target().
The original call path ends up triggering register_memory_node_under_compute_node().
Although the access level would be "3" and not impact any current node arrays, it
introduces unwanted data into the numa node access_coordinate array.
Fixes: a3a3e341f169 ("acpi: numa: Add setting of generic port system locality attributes")
Cc: Rafael J. Wysocki <rafael@kernel.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20240308220055.2172956-2-dave.jiang@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v6.9
This has been quite a small release, there's a lot of driver specific
cleanups and minor enhancements but hardly anything on the core and only
one new driver. Highlights include:
- SoundWire support for AMD ACP 6.3 systems.
- Support for reporting version information for AVS firmware.
- Support DSPless mode for Intel Soundwire systems.
- Support for configuring CS35L56 amplifiers using EFI calibration
data.
- Log which component is being operated on as part of power management
trace events.
- Support for Microchip SAM9x7, NXP i.MX95 and Qualcomm WCD939x
|
|
|
|
Merge x86-specific ACPI changes, an ACPI backlight driver change, ACPI
APEI change and miscellaneous ACPI-related changes for 6.9-rc1:
- Add DELL0501 handling to acpi_quirk_skip_serdev_enumeration() and
make that function generic (Hans de Goede).
- Make the ACPI backlight code handle fetching EDID that is longer than
256 bytes (Mario Limonciello).
- Skip initialization of GHES_ASSIST structures for Machine Check
Architecture in APEI (Avadhut Naik).
- Convert several plaform drivers in the ACPI subsystem to using a
remove callback that returns void (Uwe Kleine-König).
- Drop the long-deprecated custom_method debugfs interface that is
problematic from the security standpoint (Rafael Wysocki).
- Use %pe in a couple of places in the ACPI code for easier error
decoding (Onkarnath).
* acpi-x86:
ACPI: x86: Add DELL0501 handling to acpi_quirk_skip_serdev_enumeration()
ACPI: x86: Move acpi_quirk_skip_serdev_enumeration() out of CONFIG_X86_ANDROID_TABLETS
* acpi-video:
ACPI: video: Handle fetching EDID that is longer than 256 bytes
* acpi-apei:
ACPI: APEI: Skip initialization of GHES_ASSIST structures for Machine Check Architecture
ACPI: APEI: GHES: Convert to platform remove callback returning void
* acpi-misc:
ACPI: pfr_update: Convert to platform remove callback returning void
ACPI: pfr_telemetry: Convert to platform remove callback returning void
ACPI: fan: Convert to platform remove callback returning void
ACPI: GED: Convert to platform remove callback returning void
ACPI: DPTF: Convert to platform remove callback returning void
ACPI: AGDI: Convert to platform remove callback returning void
ACPI: TAD: Convert to platform remove callback returning void
ACPI: Drop the custom_method debugfs interface
ACPI: use %pe for better readability of errors while printing
|
|
'acpi-thermal'
Merge ACPI tables parsing change, ACPI processor driver change, ACPI
device properties handling changes and an ACPI thermal code change for
6.9-rc1:
- Make the NFIT parsing code use acpi_evaluate_dsm_typed() (Andy
Shevchenko).
- Fix a memory leak in acpi_processor_power_exit() (Armin Wolf).
- Make it possible to quirk the CSI-2 and MIPI DisCo for Imaging
properties parsing and add a quirk for Dell XPS 9315 (Sakari Ailus).
- Prevent false-positive static checker warnings from triggering by
intializing some variables in the ACPI thermal code to zero (Colin
Ian King).
* acpi-tables:
ACPI: NFIT: Switch to use acpi_evaluate_dsm_typed()
* acpi-processor:
ACPI: processor_idle: Fix memory leak in acpi_processor_power_exit()
* acpi-property:
ACPI: property: Polish ignoring bad data nodes
ACPI: property: Ignore bad graph port nodes on Dell XPS 9315
ACPI: utils: Make acpi_handle_path() not static
* acpi-thermal:
ACPI: thermal_lib: Initialize temp_decik to zero
|
|
Merge ACPI device enumeration and bus type changes, ACPI power
management changes and ACPI IRQ override handling quirks for 6.9-rc1:
- Rearrange Device Check and Bus Check notification handling in the
ACPI device hotplug code to make it get the "enabled" _STA bit into
account (Rafael Wysocki).
- Modify acpi_processor_add() to skip processors with the "enabled"
_STA bit clear, as per the specification (Rafael Wysocki).
- Stop failing Device Check notification handling without a valid
reason (Rafael Wysocki).
- Defer enumeration of devices that depend on a device with an ACPI
device ID equalt to INTC10CF to address probe ordering issues on
some platforms (Wentong Wu).
- Constify acpi_bus_type (Ricardo Marliere).
- Make the ACPI-specific suspend-to-idle code take the Low-Power S0
Idle MSFT UUID into account on non-AMD systems (Rafael Wysocki).
- Add ACPI IRQ override quirks for some new platforms (Sergey
Kalinichev, Maxim Kudinov, Alexey Froloff, Sviatoslav Harasymchuk,
Nicolas Haye).
* acpi-scan:
ACPI: scan: Consolidate Device Check and Bus Check notification handling
ACPI: scan: Rework Device Check and Bus Check notification handling
ACPI: scan: Make acpi_processor_add() check the device enabled bit
ACPI: scan: Relocate acpi_bus_trim_one()
ACPI: scan: Fix device check notification handling
ACPI: scan: Defer enumeration of devices with a _DEP pointing to IVSC device
* acpi-bus:
ACPI: bus: make acpi_bus_type const
* acpi-pm:
ACPI: PM: s2idle: Enable Low-Power S0 Idle MSFT UUID for non-AMD systems
* acpi-resource:
ACPI: resource: Use IRQ override on Maibenben X565
ACPI: resource: Add MAIBENBEN X577 to irq1_edge_low_force_override
ACPI: resource: Do IRQ override on Lunnen Ground laptops
ACPI: resource: Add IRQ override quirk for ASUS ExpertBook B2502FBA
ACPI: resource: Skip IRQ override on ASUS ExpertBook B1502CVA
|
|
Add the ACPI HIDs and smi_node descriptions for the CS35L54 and CS35L57
Boosted Smart Amplifiers.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Acked-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <20240308135900.603192-4-rf@opensource.cirrus.com>
|
|
Use ACPI IRQ override on Maibenben X565 laptop to make the internal
keyboard work.
Add a new entry to the irq1_edge_low_force_override structure, similar
to the existing ones.
Signed-off-by: Sergey Kalinichev <kalinichev.so.0@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
To align with ACPI 6.3+, since bit_width can be any 8-bit value, it
cannot be depended on to be always on a clean 8b boundary. This was
uncovered on the Cobalt 100 platform.
SError Interrupt on CPU26, code 0xbe000011 -- SError
CPU: 26 PID: 1510 Comm: systemd-udevd Not tainted 5.15.2.1-13 #1
Hardware name: MICROSOFT CORPORATION, BIOS MICROSOFT CORPORATION
pstate: 62400009 (nZCv daif +PAN -UAO +TCO -DIT -SSBS BTYPE=--)
pc : cppc_get_perf_caps+0xec/0x410
lr : cppc_get_perf_caps+0xe8/0x410
sp : ffff8000155ab730
x29: ffff8000155ab730 x28: ffff0080139d0038 x27: ffff0080139d0078
x26: 0000000000000000 x25: ffff0080139d0058 x24: 00000000ffffffff
x23: ffff0080139d0298 x22: ffff0080139d0278 x21: 0000000000000000
x20: ffff00802b251910 x19: ffff0080139d0000 x18: ffffffffffffffff
x17: 0000000000000000 x16: ffffdc7e111bad04 x15: ffff00802b251008
x14: ffffffffffffffff x13: ffff013f1fd63300 x12: 0000000000000006
x11: ffffdc7e128f4420 x10: 0000000000000000 x9 : ffffdc7e111badec
x8 : ffff00802b251980 x7 : 0000000000000000 x6 : ffff0080139d0028
x5 : 0000000000000000 x4 : ffff0080139d0018 x3 : 00000000ffffffff
x2 : 0000000000000008 x1 : ffff8000155ab7a0 x0 : 0000000000000000
Kernel panic - not syncing: Asynchronous SError Interrupt
CPU: 26 PID: 1510 Comm: systemd-udevd Not tainted
5.15.2.1-13 #1
Hardware name: MICROSOFT CORPORATION, BIOS MICROSOFT CORPORATION
Call trace:
dump_backtrace+0x0/0x1e0
show_stack+0x24/0x30
dump_stack_lvl+0x8c/0xb8
dump_stack+0x18/0x34
panic+0x16c/0x384
add_taint+0x0/0xc0
arm64_serror_panic+0x7c/0x90
arm64_is_fatal_ras_serror+0x34/0xa4
do_serror+0x50/0x6c
el1h_64_error_handler+0x40/0x74
el1h_64_error+0x7c/0x80
cppc_get_perf_caps+0xec/0x410
cppc_cpufreq_cpu_init+0x74/0x400 [cppc_cpufreq]
cpufreq_online+0x2dc/0xa30
cpufreq_add_dev+0xc0/0xd4
subsys_interface_register+0x134/0x14c
cpufreq_register_driver+0x1b0/0x354
cppc_cpufreq_init+0x1a8/0x1000 [cppc_cpufreq]
do_one_initcall+0x50/0x250
do_init_module+0x60/0x27c
load_module+0x2300/0x2570
__do_sys_finit_module+0xa8/0x114
__arm64_sys_finit_module+0x2c/0x3c
invoke_syscall+0x78/0x100
el0_svc_common.constprop.0+0x180/0x1a0
do_el0_svc+0x84/0xa0
el0_svc+0x2c/0xc0
el0t_64_sync_handler+0xa4/0x12c
el0t_64_sync+0x1a4/0x1a8
Instead, use access_width to determine the size and use the offset and
width to shift and mask the bits to read/write out. Make sure to add a
check for system memory since pcc redefines the access_width to
subspace id.
If access_width is not set, then fall back to using bit_width.
Signed-off-by: Jarred White <jarredwhite@linux.microsoft.com>
Reviewed-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Cc: 5.15+ <stable@vger.kernel.org> # 5.15+
[ rjw: Subject and changelog edits, comment adjustments ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
This reverts commit d52848620de00cde4a3a5df908e231b8c8868250, which was
originally put in place to work around a s2idle failure on this platform
where the NVMe device was inaccessible upon resume.
After extended testing, we found that the firmware's implementation of S3
is buggy and intermittently fails to wake up the system. We need to revert
to s2idle mode.
The NVMe issue has now been solved more precisely in the commit titled
"PCI: Disable D3cold on Asus B1400 PCI-NVMe bridge"
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215742
Link: https://lore.kernel.org/r/20240228075316.7404-2-drake@endlessos.org
Signed-off-by: Daniel Drake <drake@endlessos.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Jian-Hong Pan <jhp@endlessos.org>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
|
|
Architecture
To support GHES_ASSIST on Machine Check Architecture (MCA) error sources,
a set of GHES structures is provided by the system firmware for each MCA
error source. Each of these sets consists of a GHES structure for each MCA
bank on each logical CPU, with all structures of a set sharing a common
Related Source ID, equal to the Source ID of one of the MCA error source
structures.[1] On SOCs with large core counts, this typically equates to
tens of thousands of GHES_ASSIST structures for MCA under
"/sys/bus/platform/drivers/GHES".
Support for GHES_ASSIST however, hasn't been implemented in the kernel. As
such, the information provided through these structures is not consumed by
Linux. Moreover, these GHES_ASSIST structures for MCA, which are supposed
to provide supplemental information in context of an error reported by
hardware, are setup as independent error sources by the kernel during HEST
initialization.
Additionally, if the Type field of the Notification structure, associated
with these GHES_ASSIST structures for MCA, is set to Polled, the kernel
sets up a timer for each individual structure. The duration of the timer
is derived from the Poll Interval field of the Notification structure. On
SOCs with high core counts, this will result in tens of thousands of
timers expiring periodically causing unnecessary preemptions and wastage
of CPU cycles. The problem will particularly intensify if Poll Interval
duration is not sufficiently high.
Since GHES_ASSIST support is not present in kernel, skip initialization
of GHES_ASSIST structures for MCA to eliminate their performance impact.
[1] ACPI specification 6.5, section 18.7
Signed-off-by: Avadhut Naik <avadhut.naik@amd.com>
Reviewed-by: Yazen Ghannam <yazen.ghannam@amd.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Revert a recent EC driver change that introduced an unexpected and
undesirable user-visible difference in behavior (Rafael Wysocki)"
* tag 'acpi-6.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
Revert "ACPI: EC: Use a spin lock without disabing interrupts"
|
|
There is no particular reason why device object subtree rescans in
acpi_scan_device_check() and acpi_scan_device_check() should be carried
out differently, so move the rescan code into a new function called
acpi_scan_rescan_bus() and make both the functions above invoke it.
While at it, in the Device Check case, start the device object subtree
rescan mentioned above from the target device's parent, as per the
specification. [1]
Link: https://uefi.org/specs/ACPI/6.5/05_ACPI_Software_Programming_Model.html#device-object-notification-values # [1]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The underlying problem is the handling of the enabled bit in device
status (bit 1 of _STA return value) which is required by the ACPI
specification to be observed in addition to the present bit (bit 0
of _STA return value) [1], but Linux does not observe it.
Since Linux has not looked at that bit for a long time, it is generally
risky to start obseving it in all device enumeration cases, especially
at the system initialization time, but it can be observed when the
kernel receives a Bus Check or Device Check notification indicating a
change in device configuration. In those cases, seeing the enabled bit
clear may be regarded as an indication that the device at hand should
not be used any more.
For this reason, rework the handling of Device Check and Bus Check
notifications in the ACPI core device enumeration code in the
following way:
1. Rename acpi_bus_trim_one() to acpi_scan_check_and_detach() and make
it check device status if its second argument is not NULL, in which
case it will detach scan handlers or ACPI drivers from devices whose
_STA returns the enabled bit clear.
2. Make acpi_scan_device_check() and acpi_scan_bus_check() invoke
acpi_scan_check_and_detach() with a non-NULL second argument
unconditionally, so scan handlers and ACPI drivers are detached
from the target device and its ancestors if their _STA returns the
enabled bit clear.
Link: https://uefi.org/specs/ACPI/6.5/06_Device_Configuration.html#sta-device-status # [1]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Modify acpi_processor_add() return an error if _STA returns the enabled
bit clear for the given processor device, so as to avoid using processors
that don't decode their resources, as per the ACPI specification. [1]
Link: https://uefi.org/specs/ACPI/6.5/06_Device_Configuration.html#sta-device-status # [1]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Relocate acpi_bus_trim_one() (without modifications) so as to avoid the
need to add a forward declaration of it in a subsequent patch.
No functional changes.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
It is generally invalid to fail a Device Check notification if the scan
handler has not been attached to the given device after a bus rescan,
because there may be valid reasons for the scan handler to refuse
attaching to the device (for example, the device is not ready).
For this reason, modify acpi_scan_device_check() to return 0 in that
case without printing a warning.
While at it, reduce the log level of the "already enumerated" message
in the same function, because it is only interesting when debugging
notification handling
Fixes: 443fc8202272 ("ACPI / hotplug: Rework generic code to handle suprise removals")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
Rafael J. Wysocki
Vanshidhar Konda
Jarred White
Hans de Goede
Stephen Horvath
Nikita Kiryushin
Arnd Bergmann
Linus Torvalds
Sunil V L
Yang Li
Dan Williams
Robert Richter
Ben Cheatham
Dave Jiang
Takashi Iwai
Simon Trimmer
Sergey Kalinichev
Daniel Drake
Avadhut Naik
