Age | Commit message (Collapse) | Author | Files | Lines |
|
DP2.1 Specs added new DPCDs definitions for square pattern configs[1]
These new definitions are used for UHBR Source Transmitter
Equalizations tests[2]. Add the 3 new values for square pattern.
v2: rebase
[1]: DP2.1 Specs - 2.12.3.6.5 Square Pattern
[2]: DP2.1 PHY CTS specs - 4.3 UHBR Source Transmitter Equalization
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Lee Shawn C <shawn.c.lee@intel.com>
Signed-off-by: Khaled Almahallawy <khaled.almahallawy@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231130231510.221143-1-khaled.almahallawy@intel.com
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-next
drm/i915 feature pull for v6.8:
Features and functionality:
- Major DP MST improvements on bandwidth management, DSC (Imre, Stan, Ville)
- DP panel replay enabling (Animesh, Jouni)
- MTL C20 phy state verification (Mika)
- MTL DP DSC fractional bpp support (Ankit, Vandita, Swati, Imre)
- Audio fastset support (Ville)
Refactoring and cleanups:
- Use dma fence interfaces instead of i915_sw_fence (Jouni)
- Separate gem and display code (Jouni, Juha-Pekka)
- AUX register macro refactoring (Jani)
- Separate display module/device parameters from the rest (Jouni)
- Move display capabilities debugfs under display (Vinod)
- Makefile cleanup (Jani)
- Register cleanups (Ville)
- Enginer iterator cleanups (Tvrtko)
- Move display lock inits under display/ (Jani)
- VLV/CHV DPIO PHY register and interface refactoring (Jani)
- DSI VBT sequence refactoring (Jani, Andy Shevchenko)
- C10/C20 PHY PLL hardware readout and calculation abstractions (Lucas)
- DPLL code cleanups (Ville)
- Cleanup PXP plane protection checks (Jani)
Fixes:
- Replace VLV/CHV DSI GPIO direct access with proper GPIO API usage (Andy Shevchenko)
- Fix VLV/CHV DSI GPIO wrong initial value (Hans de Goede)
- Fix UHBR data, link M/N/TU and PBN values (Imre)
- Fix HDCP state on an enable/disable cycle (Suraj)
- Fix DP MST modeset sequence to be according to spec (Ville)
- Improved atomicity for multi-pipe commits (Ville)
- Update URLs in i915 MAINTAINERS entry and code (Jani)
- Check for VGA converter presence in eDP probe (Ville)
- Fix surface size checks (Ville)
- Fix LNL port/phy assignment (Lucas)
- Reset C10/C20 message bus harder to avoid sporadic failures (Mika)
- Fix bogus VBT HDMI level shift on BDW (Ville)
- Add workaround for LNL underruns when enabling FBC (Vinod)
- DSB refactoring (Animesh)
- DPT refactoring (Juha-Pekka)
- Disable DSC on DP MST on ICL (Imre)
- Fix PSR VSC packet setup timing (Mika)
- Fix LUT rounding and conversions (Ville)
DRM core display changes:
- DP MST fixes, helpers, refactoring to support bandwidth management (Imre)
- DP MST PBN divider value refactoring and fixes (Imre)
- DPCD register definitions (Ankit, Imre)
- Add helper to get DSC bpp precision (Ankit)
- Fix color LUT rounding (Ville)
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87v89sl2ao.fsf@intel.com
[sima: Some conflicts in the amdgpu dp mst code]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
The current way of calculating the pbn_div value, the link BW per each
MTP slot, worked only for DP 1.4 link rates. Fix things up for UHBR
rates calculating with the correct channel coding efficiency based on
the link rate.
v2:
- Return the fractional pbn_div value from drm_dp_get_vc_payload_bw().
v3:
- Fix rounding up quotient while calculating req_slots. (Ville)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231117150929.1767227-1-imre.deak@intel.com
|
|
On UHBR links the PBN divider is a fractional number, accordingly store
it in fixed point format. For now drm_dp_get_vc_payload_bw() always
returns a whole number and all callers will use only the integer part of
it which should preserve the current behavior. The next patch will fix
drm_dp_get_vc_payload_bw() for UHBR rates returning a fractional number
for those (also accounting for the channel coding efficiency correctly).
Cc: Lyude Paul <lyude@redhat.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Wayne Lin <wayne.lin@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
[Rebased changes in dm_helpers_construct_old_payload() on drm-intel-next]
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231116131841.1588781-2-imre.deak@intel.com
|
|
Add helper to get the DSC bits_per_pixel precision for the DP sink.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Sui Jingfeng <suijingfeng@loongson.cn>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231110101020.4067342-2-ankit.k.nautiyal@intel.com
|
|
Add DPCD register definition for discovering, enabling and
checking status of panel replay of the sink.
Cc: Jouni Högander <jouni.hogander@intel.com>
Cc: Arun R Murthy <arun.r.murthy@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231108072303.3414118-2-animesh.manna@intel.com
|
|
Add helpers drivers can use to calculate the BW allocation overhead -
due to SSC, FEC, DSC and data alignment on symbol cycles - and the
channel coding efficiency - due to the 8b/10b, 128b/132b encoding. On
128b/132b links the FEC overhead is part of the coding efficiency, so
not accounted for in the BW allocation overhead.
The drivers can use these functions to calculate a ratio, controlling
the stream symbol insertion rate of the source device in each SST TU
or MST MTP frame. Drivers can calculate this
m/n = (pixel_data_rate * drm_dp_bw_overhead()) /
(link_data_rate * drm_dp_bw_channel_coding_efficiency())
ratio for a given link and pixel stream and with that the
slots_per_mtp = CEIL(64 * m / n)
allocated slots per MTP for the stream in a link frame and with
that the
pbn = slots_per_mtp * drm_mst_get_pbn_divider()
allocated PBNs for the stream on the MST link path.
Take drm_dp_bw_overhead() into use in drm_dp_calc_pbn_mode(), for
drivers calculating the PBN value directly.
v2:
- Add dockbook description to drm_dp_bw_channel_coding_efficiency().
(LKP).
- Clarify the way m/n ratio is calculated in the commit log.
v3:
- Fix compile breakage for !CONFIG_BACKLIGHT_CLASS_DEVICE. (LKP)
- Account for FEC_PM overhead (+ 0.0015625 %), add comment
with the formula to calculate the total FEC overhead. (Ville)
v4:
- Rename DRM_DP_OVERHEAD_SSC to DRM_DP_OVERHEAD_SSC_REF_CLK. (Ville)
v5:
- Clarify in the commit log what MTP means.
- Simplify the commit log's formula to calculate PBN.
Cc: Lyude Paul <lyude@redhat.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: kernel test robot <lkp@intel.com>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> (v2)
Acked-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231107001505.3370108-1-imre.deak@intel.com
|
|
Add a quirk for Synaptics MST hubs, which require a workaround - at leat
on i915 - for some modes, on which the hub applies HBLANK expansion.
These modes will only work by enabling DSC decompression for them, a
follow-up patch will do this in i915.
v2:
- Fix the quirk name in its DocBook description.
Cc: Lyude Paul <lyude@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231030155843.2251023-9-imre.deak@intel.com
|
|
Add the DPCD flag to enable DSC passthrough in a last branch device,
used in a follow-up i915 patch.
Also add a flag to detect HBLANK expansion support in a branch device,
used by a workaround in a follow-up i915 patch.
Cc: Lyude Paul <lyude@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231030155843.2251023-8-imre.deak@intel.com
|
|
Factor out a helper to check the atomic state for one MST topology
manager, returning the MST port where the BW limit check has failed.
This will be used in a follow-up patch by the i915 driver to improve the
BW sharing between MST streams.
Cc: Lyude Paul <lyude@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231030155843.2251023-5-imre.deak@intel.com
|
|
Add drm_dp_mst_port_downstream_of_parent() required by the i915
driver in a follow-up patch to resolve a BW overallocation of MST
streams going through a given MST port.
Cc: Lyude Paul <lyude@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231030155843.2251023-4-imre.deak@intel.com
|
|
The current code does '(bpp << 4) / 16' in the MST PBN
calculation, but that is just the same as 'bpp' so the
DSC codepath achieves absolutely nothing. Fix it up so that
the fractional part of the bpp value is actually used instead
of truncated away. 64*1006 has enough zero lsbs that we can
just shift that down in the dividend and thus still manage
to stick to a 32bit divisor.
And while touching this, let's just make the whole thing more
straightforward by making the passed in bpp value .4 binary
fixed point always, instead of having to pass in different
things based on whether DSC is enabled or not.
v2:
- Fix DSC kunit test cases.
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: David Francis <David.Francis@amd.com>
Cc: Mikita Lipski <mikita.lipski@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Fixes: dc48529fb14e ("drm/dp_mst: Add PBN calculation for DSC modes")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
[Imre: Fix kunit test cases]
Acked-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231030155843.2251023-3-imre.deak@intel.com
|
|
Updating drm-misc-next to the state of Linux v6.6-rc2.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
|
|
Prefer struct drm_edid where possible. With limited users for the
drm_dp_downstream_*() helpers, this is fairly straightforward.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231004162149.2802113-1-jani.nikula@intel.com
|
|
Backmerge to sync up with drm-intel-gt-next and drm-misc-next.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-next
drm/i915 feature pull for v6.7:
Features and functionality:
- Early Xe2 LPD / Lunarlake (LNL) display enabling (Lucas, Matt, Gustavo,
Stanislav, Luca, Clint, Juha-Pekka, Balasubramani, Ravi)
- Plenty of various DSC improvements and fixes (Ankit)
- Add DSC PPS state readout and verification (Suraj)
- Improve fastsets for VRR, LRR and M/N updates (Ville)
- Use connector->ddc to create (non-DP MST) connector sysfs ddc symlinks (Ville)
- Various DSB improvements, load LUTs using DSB (Ville)
- Improve shared link bandwidth management, starting with FDI (Imre)
- Optimize get param ioctl for PXP status (Alan)
- Remove DG2 pre-production hardware workarounds (Matt)
- Add more RPL P/U PCI IDs (Dnyaneshwar)
- Add new DG2-G12 stepping (Swati)
- Add PSR sink error status to debugfs (Jouni)
- Add DP enhanced framing to crtc state checker (Ville)
Refactoring and cleanups:
- Simplify TileY/Tile4 tiling selftest enumeration (Matt)
- Remove some unused power domain code (Gustavo)
- Check stepping of display IP version rather than MTL platform (Matt)
- DP audio compute config cleanups (Vinod)
- SDVO cleanups and refactoring, more robust failure handling (Ville)
- Color register definition and readout cleanups (Jani)
- Reduce header interdependencies for frontbuffer tracking (Jani)
- Continue replacing struct edid with struct drm_edid (Jani)
- Use source physical address instead of EDID for CEC (Jani)
- Clean up Type-C port lane count functions (Luca)
- Clean up DSC PPS register definitions and readout (Jani)
- Stop using GEM_BUG_ON()/GEM_WARN_ON() in display code (Jani)
- Move more of the display probe to display code (Jani)
- Remove redundant runtime suspended state flag (Jouni)
- Move display info printing to display code (Balasubramani)
- Frontbuffer tracking improvements (Jouni)
- Add trailing newlines to debug logging (Jim Cromie)
- Separate display workarounds from clock gating init (Matt)
- Reduce dmesg log spamming for combo PHY, PLL state, FEC, DP MST (Ville, Imre)
Fixes:
- Fix hotplug poll detect loops via suspend/resume (Imre)
- Fix hotplug detect for forced connectors (Imre)
- Fix DSC first_line_bpg_offset calculation (Suraj)
- Fix debug prints for SDP CRC16 (Arun)
- Fix PXP runtime resume (Alan)
- Fix cx0 PHY lane handling (Gustavo)
- Fix frontbuffer tracking locking in debugfs (Juha-Pekka)
- Fix SDVO detect on some models (Ville)
- Fix SDP split configuration for DP MST (Vinod)
- Fix AUX usage and reads for HDCP on DP MST (Suraj)
- Fix PSR workaround (Jouni)
- Fix redundant AUX power get/put in DP force (Imre)
- Fix ICL DSI TCLK POST by letting hardware handle it (William)
- Fix IRQ reset for XE LP+ (Gustavo)
- Fix h/vsync_end instead of h/vtotal in VBT (Ville)
- Fix C20 PHY msgbus timeout issues (Gustavo)
- Fix pre-TGL FEC pipe A vs. DDI A mixup (Ville)
- Fix FEC state readout for DP MST (Ville)
DRM subsystem core changes:
- Assume sink supports 8 bpc when DSC is supported (Ankit)
- Add drm_edid_is_digital() helper (Jani)
- Parse source physical address from EDID (Jani)
- Add function to attach CEC without EDID (Jani)
- Reorder connector sysfs/debugfs remove (Ville)
- Register connector sysfs ddc symlink later (Ville)
Media subsystem changes:
- Add comments about CEC source physical address usage (Jani)
Merges:
- Backmerge drm-next to get v6.6-rc1 (Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
# Conflicts:
# drivers/gpu/drm/i915/i915_drv.h
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87r0mhi7a6.fsf@intel.com
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v6.7-rc1:
UAPI Changes:
- Nouveau changed to not set NO_PREFETCH flag explicitly.
Cross-subsystem Changes:
- Update documentation of dma-buf intro and uapi.
- fbdev/sbus fixes.
- Use initializer macros in a lot of fbdev drivers.
- Add Boris Brezillon as Panfrost driver maintainer.
- Add Jessica Zhang as drm/panel reviewer.
- Make more fbdev drivers use fb_ops helpers for deferred io.
- Small hid trailing whitespace fix.
- Use fb_ops in hid/picolcd
Core Changes:
- Assorted small fixes to ttm tests, drm/mst.
- Documentation updates to bridge.
- Add kunit tests for some drm_fb functions.
- Rework drm_debugfs implementation.
- Update xe documentation to mark todos as completed.
Driver Changes:
- Add support to rockchip for rv1126 mipi-dsi and vop.
- Assorted small fixes to nouveau, bridge/samsung-dsim,
bridge/lvds-codec, loongson, rockchip, panfrost, gma500, repaper,
komeda, virtio, ssd130x.
- Add support for simple panels Mitsubishi AA084XE01,
JDI LPM102A188A,
- Documentation updates to accel/ivpu.
- Some nouveau scheduling/fence fixes.
- Power management related fixes and other fixes to ivpu.
- Assorted bridge/it66121 fixes.
- Make platform drivers return void in remove() callback.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3da6554b-3b47-fe7d-c4ea-21f4f819dbb6@linux.intel.com
|
|
Sync to v6.6-rc1.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
[Why]
Today, the allocation/deallocation steps and status is a bit unclear.
For instance, payload->vc_start_slot = -1 stands for "the failure of
updating DPCD payload ID table" and can also represent as "payload is not
allocated yet". These two cases should be handled differently and hence
better to distinguish them for better understanding.
[How]
Define enumeration - ALLOCATION_LOCAL, ALLOCATION_DFP and ALLOCATION_REMOTE
to distinguish different allocation status. Adjust the code to handle
different status accordingly for better understanding the sequence of
payload allocation and payload removement.
For payload creation, the procedure should look like this:
DRM part 1:
* step 1 - update sw mst mgr variables to add a new payload
* step 2 - add payload at immediate DFP DPCD payload table
Driver:
* Add new payload in HW and sync up with DFP by sending ACT
DRM Part 2:
* Send ALLOCATE_PAYLOAD sideband message to allocate bandwidth along the
virtual channel.
And as for payload removement, the procedure should look like this:
DRM part 1:
* step 1 - Send ALLOCATE_PAYLOAD sideband message to release bandwidth
along the virtual channel
* step 2 - Clear payload allocation at immediate DFP DPCD payload table
Driver:
* Remove the payload in HW and sync up with DFP by sending ACT
DRM part 2:
* update sw mst mgr variables to remove the payload
Note that it's fine to fail when communicate with the branch device
connected at immediate downstrean-facing port, but updating variables of
SW mst mgr and HW configuration should be conducted anyway. That's because
it's under commit_tail and we need to complete the HW programming.
Changes since v1:
* Remove the set but not use variable 'old_payload' in function
'nv50_msto_prepare'. Catched by kernel test robot <lkp@intel.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230807025639.1612361-3-Wayne.Lin@amd.com
|
|
Connectors have source physical address available in display
info. There's no need to parse the EDID again for this. Add
drm_dp_cec_attach() to do this.
Seems like the set_edid/unset_edid naming is a bit specific now that
there's no need to pass the EDID at all, so aim for attach/detach going
forward.
v2: Fix the embarrashing build failures
Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: linux-media@vger.kernel.org
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230825130120.1250089-1-jani.nikula@intel.com
|
|
DP DSC Receiver Capabilities are exposed via DPCD 60h-6Fh.
Fix the DSC RECEIVER CAP SIZE accordingly.
Fixes: ffddc4363c28 ("drm/dp: Add DP DSC DPCD receiver capability size define and missing SHIFT")
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: <stable@vger.kernel.org> # v5.0+
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230818044436.177806-1-ankit.k.nautiyal@intel.com
|
|
https://gitlab.freedesktop.org/drm/msm into drm-next
Updates for v6.5.. this includes a backmerg of drm-next tree to be able
to use new DRM DSC helpers.
Core:
+ Add Marijn Suijten as drm/msm reviewer
+ Adreno A660 bindings
+ SM8350 MDSS bindings fix
+ Fix adreno_is_a690() warnings
+ More generic (DRM) and MSM-specific DSC helpers
DP:
+ Removed obsolete USB-PD remains
+ Documented DP compatible string for sm8550 platform
DPU:
+ Enable missing features (DSPP, DSC, split display) on sc8180x,
sc8280xp, sm8450
+ Enabled writeback on sc7280
+ Implemented tearcheck support to support vsync on SM150 and
newer platforms
+ Native HDMI output support
+ Dropped unused features: regdma, GC, IGC
+ Fixed the DSC flush operations
+ Simplified QoS handling, removing obsolete and unused features
and merging SSPP and WB code paths
+ Reworked dpu_encoder initialisation path
+ Enabled DSPP support on sdm845
+ Disabled color-management if DSPP blocks are not available
+ Added support for DSC 1.2 blocks found on sm8350 and later
+ Added .fb_dirty to fix CMD panels
DSI:
+ Drop powerup quirks in favour of using pre_enable_prev_first for
downstream bridges
+ Fixed 14nm DSI PHY programming
+ Added support for DSI and 28nm DSI PHY on MSM8226 platform
+ Make use of DRM and MSM DSC helpers
MDP5:
+ Added support for display controller on MSM8226 platform
GPU:
+ A690 support
+ Don't set IO_PGTABLE_QUIRK_ARM_OUTER_WBWA on devices with coherent SMMU
(like A690)
+ Move cmdstream dumping out of fence signaling path
+ Cleanups
+ Support for a6xx devices without GMU (aka "GMU wrapper"
+ a610 support
+ a619_holi support (a619 variant without GMU)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGsUB=tRB4nR6ZCJMuLhro5zN3BQWUSywVYbaipqqDZ_cQ@mail.gmail.com
|
|
[Why]
The sequence for collecting down_reply from source perspective should
be:
Request_n->repeat (get partial reply of Request_n->clear message ready
flag to ack DPRX that the message is received) till all partial
replies for Request_n are received->new Request_n+1.
Now there is chance that drm_dp_mst_hpd_irq() will fire new down
request in the tx queue when the down reply is incomplete. Source is
restricted to generate interveleaved message transactions so we should
avoid it.
Also, while assembling partial reply packets, reading out DPCD DOWN_REP
Sideband MSG buffer + clearing DOWN_REP_MSG_RDY flag should be
wrapped up as a complete operation for reading out a reply packet.
Kicking off a new request before clearing DOWN_REP_MSG_RDY flag might
be risky. e.g. If the reply of the new request has overwritten the
DPRX DOWN_REP Sideband MSG buffer before source writing one to clear
DOWN_REP_MSG_RDY flag, source then unintentionally flushes the reply
for the new request. Should handle the up request in the same way.
[How]
Separete drm_dp_mst_hpd_irq() into 2 steps. After acking the MST IRQ
event, driver calls drm_dp_mst_hpd_irq_send_new_request() and might
trigger drm_dp_mst_kick_tx() only when there is no on going message
transaction.
Changes since v1:
* Reworked on review comments received
-> Adjust the fix to let driver explicitly kick off new down request
when mst irq event is handled and acked
-> Adjust the commit message
Changes since v2:
* Adjust the commit message
* Adjust the naming of the divided 2 functions and add a new input
parameter "ack".
* Adjust code flow as per review comments.
Changes since v3:
* Update the function description of drm_dp_mst_hpd_irq_handle_event
Changes since v4:
* Change ack of drm_dp_mst_hpd_irq_handle_event() to be an array align
the size of esi[]
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add helper to get the integer value of drm_dsc_config.bits_per_pixel
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/539268/
Link: https://lore.kernel.org/r/20230329-rfc-msm-dsc-helper-v14-3-bafc7be95691@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Add a helper setting config values which are typically constant across
operating modes (table E-4 of the standard) and mux_word_size (which is
a const according to 3.5.2).
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/539280/
Link: https://lore.kernel.org/r/20230329-rfc-msm-dsc-helper-v14-2-bafc7be95691@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Add helpers to calculate det_thresh_flatness and initial_scale_value as
these calculations are defined within the DSC spec.
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/539282/
Link: https://lore.kernel.org/r/20230329-rfc-msm-dsc-helper-v14-1-bafc7be95691@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-next
amd-drm-next-6.5-2023-06-02:
amdgpu:
- SR-IOV fixes
- Warning fixes
- Misc code cleanups and spelling fixes
- DCN 3.2 updates
- Improved DC FAMS support for better power management
- Improved DC SubVP support for better power management
- DCN 3.1.x fixes
- Max IB size query
- DC GPU reset fixes
- RAS updates
- DCN 3.0.x fixes
- S/G display fixes
- CP shadow buffer support
- Implement connector force callback
- Z8 power improvements
- PSP 13.0.10 vbflash support
- Mode2 reset fixes
- Store MQDs in VRAM to improve queue switch latency
- VCN 3.x fixes
- JPEG 3.x fixes
- Enable DC_FP on LoongArch
- GFXOFF fixes
- GC 9.4.3 partition support
- SDMA 4.4.2 partition support
- VCN/JPEG 4.0.3 partition support
- VCN 4.0.3 updates
- NBIO 7.9 updates
- GC 9.4.3 updates
- Take NUMA into account when allocating memory
- Handle NUMA for partitions
- SMU 13.0.6 updates
- GC 9.4.3 RAS updates
- Stop including unused swiotlb.h
- SMU 13.0.7 fixes
- Fix clock output ordering on some APUs
- Clean up DC FPGA code
- GFX9 preemption fixes
- Misc irq fixes
- S0ix fixes
- Add new DRM_AMDGPU_WERROR config parameter to help with CI
- PCIe fix for RDNA2
- kdoc fixes
- Documentation updates
amdkfd:
- Query TTM mem limit rather than hardcoding it
- GC 9.4.3 partition support
- Handle NUMA for partitions
radeon:
- Fix possible double free
- Stop including unused swiotlb.h
- Fix possible division by zero
ttm:
- Add query for TTM mem limit
- Add NUMA awareness to pools
- Export ttm_pool_fini()
UAPI:
- Add new ctx query flag to better handle GPU resets
Mesa MR: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/22290
- Add new interface to query and set shadow buffer for RDNA3
Mesa MR: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/21986
- Add new INFO query for max IB size
Proposed userspace: https://gitlab.freedesktop.org/bnieuwenhuizen/mesa/-/commits/ib-rejection-v3
amd-drm-next-6.5-2023-06-09:
amdgpu:
- S0ix fixes
- Initial SMU13 Overdrive support
- kdoc fixes
- Misc clode cleanups
- Flexible array fixes
- Display OTG fixes
- SMU 13.0.6 updates
- Revert some broken clock counter updates
- Misc display fixes
- GFX9 preemption fixes
- Add support for newer EEPROM bad page table format
- Add missing radeon secondary id
- Add support for new colorspace KMS API
- CSA fix
- Stable pstate fixes for APUs
- make vbl interface admin only
- Handle PCI accelerator class
amdkfd:
- Add debugger support for gdb
radeon:
- Fix possible UAF
drm:
- Add Colorspace functionality
UAPI:
- Add debugger interface for enabling gdb
Proposed userspace: https://github.com/ROCm-Developer-Tools/ROCdbgapi/tree/wip-dbgapi
- Add KMS colorspace API
Discussion: https://lists.freedesktop.org/archives/dri-devel/2023-June/408128.html
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230609174817.7764-1-alexander.deucher@amd.com
|
|
This allows us to use strongly typed arguments.
v2:
- Bring NO_DATA back
- Provide explicit enum values
v3:
- Drop unnecessary '&' from kerneldoc (emersion)
v4:
- Fix Normal Colorimetry comment
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Sebastian Wick <sebastian.wick@redhat.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Reviewed-by: Joshua Ashton <joshua@froggi.es>
Cc: Pekka Paalanen <ppaalanen@gmail.com>
Cc: Sebastian Wick <sebastian.wick@redhat.com>
Cc: Vitaly.Prosyak@amd.com
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Joshua Ashton <joshua@froggi.es>
Cc: Simon Ser <contact@emersion.fr>
Cc: Melissa Wen <mwen@igalia.com>
Cc: dri-devel@lists.freedesktop.org
Cc: amd-gfx@lists.freedesktop.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Convert the topology manager to use struct drm_edid, add
drm_dp_mst_edid_read() that returns drm_edid, and rewrite the old
drm_dp_mst_get_edid() to use it.
Note that the old drm_get_edid() ended up calling
drm_connector_update_edid_property(). This responsibility is now
deferred to drivers, which all do it anyway after calling
drm_dp_mst_edid_read() or drm_dp_mst_get_edid().
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/9c32e5c241934093fc4144eed4c01155e1f03af1.1685437501.git.jani.nikula@intel.com
|
|
Caching the has_audio in struct drm_dp_mst_port seems odd, and oddly
placed. Defer audio handling to drivers, and use the info from the
connector display info. i915 was the only one using it anyway.
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/7d9eefdf150870479c5797f027d4c2b0a19ff583.1685437500.git.jani.nikula@intel.com
|
|
Sync the drm-intel-gt-next changes back to drm-intel-next via drm-next.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Include RC parameters for YCbCr 4:2:2 and 4:2:0 configurations.
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230517102807.2181589-9-dmitry.baryshkov@linaro.org
Acked-by: Dave Airlie <airlied@redhat.com>
|
|
The array of rc_parameters contains a mixture of parameters from DSC 1.1
and DSC 1.2 standards. Split these tow configuration arrays in
preparation to adding more configuration data.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Suraj Kandpal
Reviewed-by: Suraj Kandpal
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230517102807.2181589-7-dmitry.baryshkov@linaro.org
Acked-by: Dave Airlie <airlied@redhat.com>
|
|
Move DSC RC tables to DRM DSC helper. No additional code changes
and/or cleanups are a part of this commit, it will be cleaned up in the
followup commits.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230517102807.2181589-4-dmitry.baryshkov@linaro.org
Acked-by: Dave Airlie <airlied@redhat.com>
|
|
The rc_buf_thresh values are common to all DSC implementations. Move
them to the common helper together with the code to propagate them to
the drm_dsc_config.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230517102807.2181589-3-dmitry.baryshkov@linaro.org
Acked-by: Dave Airlie <airlied@redhat.com>
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for 6.5:
UAPI Changes:
Cross-subsystem Changes:
- arch: Consolidate <asm/fb.h>
Core Changes:
- aperture: Ignore firmware framebuffers with non-primary devices
- fbdev: Use fbdev's I/O helpers
- sysfs: Expose DRM connector ID
- tests: More tests for drm_rect
Driver Changes:
- armada: Implement fbdev emulation as a client
- bridge:
- fsl-ldb: Support i.MX6SX
- lt9211: Remove blanking packets
- lt9611: Remove blanking packets
- tc358768: Implement input bus formats reporting, fix various
timings and clocks settings
- ti-sn65dsi86: Implement wait_hpd_asserted
- nouveau: Improve NULL pointer checks before dereference
- panel:
- nt36523: Support Lenovo J606F
- st7703: Support Anbernic RG353V-V2
- new panels: InnoLux G070ACE-L01
- sun4i: Fix MIPI-DSI dotclock
- vc4: RGB Range toggle property, BT601 and BT2020 support for HDMI
- vkms: Convert to drmm helpers, Add reflection and rotation support
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/2pxmxdzsk2ekjy6xvbpj67zrhtwvkkhfspuvdm5pfm5i54hed6@sooct7yq6z4w
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
drm-misc-fixes for v6.4-rc2:
- More DSC macro fixes.
- Small mipi-dsi fix.
- Scheduler timeout handling fix.
---
drm-misc-fixes for v6.4-rc1:
- Fix DSC macros.
- Fix VESA format for simplefb.
- Prohibit potential out-of-bounds access in generic fbdev emulation.
- Improve AST2500+ compat on ARM.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b34135e3-2651-4e0a-a776-9b047882b1b2@linux.intel.com
|
|
The macro values just don't match the specs. Fix them.
Fixes: 1482ec00be4a ("drm: Add missing DP DSC extended capability definitions.")
Cc: Vinod Govindapillai <vinod.govindapillai@intel.com>
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230406134615.1422509-2-jani.nikula@intel.com
|
|
The operator precedence between << and & is wrong, leading to the high
byte being completely ignored. For example, with the 6.4 format, 32
becomes 0 and 24 becomes 8. Fix it, and remove the slightly confusing
and unnecessary DP_DSC_MAX_BITS_PER_PIXEL_HI_SHIFT macro while at it.
Fixes: 0575650077ea ("drm/dp: DRM DP helper/macros to get DP sink DSC parameters")
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Cc: Manasi Navare <navaremanasi@google.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: <stable@vger.kernel.org> # v5.0+
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230406134615.1422509-1-jani.nikula@intel.com
|
|
This commit adds missing luminance control registers to enable a more
standard way (VESA) to deal with eDP luminance control.
Cc: Anthony Koo <anthony.koo@amd.com>
Cc: Iswara Negulendran <iswara.nagulendran@amd.com>
Cc: Felipe Clark <felipe.clark@amd.com>
Cc: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230412000943.429031-1-Rodrigo.Siqueira@amd.com
|
|
[HOW&WHY]
Write DPCD 721 bit 7 to high, and
the appropriate luminance level
to DPCD 734-736 if bit 4 from DPCD register
734 is high, indicating that the panel
luminance control is enabled from the panel side.
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Iswara Nagulendran <Iswara.Nagulendran@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-next
- Fix DPT+shmem combo and add i915.enable_dpt modparam (Ville)
- i915.enable_sagv module parameter (Ville)
- Correction to QGV related register addresses (Vinod)
- IPS debugfs per-crtc and new file for false_color (Ville)
- More clean-up and reorganization of Display code (Jani)
- DP DSC related fixes and improvements (Stanislav, Ankit, Suraj, Swati)
- Make utility pin asserts more accurate (Ville)
- Meteor Lake enabling (Daniele)
- High refresh rate PSR fixes (Jouni)
- Cursor and Plane chicken register fixes (Ville)
- Align the ADL-P TypeC sequences with hardware specification (Imre)
- Documentation build fixes and improvements to catch bugs earlier (Lee, Jani)
- PL1 power limit hwmon entry changed to use 0 as disabled state (Ashutosh)
- DP aux sync fix and improvements (Ville)
- DP MST fixes and w/a (Stanislav)
- Limit PXP drm-errors or warning on firmware API failures (Alan)
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZC7RR3Laet8ywHRo@intel.com
|
|
Include the device and connector information in the SCDC
debugs. Makes it easier to figure out who did what.
v2: Rely on connector->ddc (Maxime)
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Cc: Robert Foss <rfoss@kernel.org>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Jernej Skrabec <jernej.skrabec@gmail.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Emma Anholt <emma@anholt.net>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: intel-gfx@lists.freedesktop.org
Cc: linux-tegra@vger.kernel.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230403223652.18848-1-ville.syrjala@linux.intel.com
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Acked-by: Thierry Reding <treding@nvidia.com>
|
|
Add helper to check if the DP sink supports DSC with the given
o/p format.
v2: Add documentation for the helper. (Uma Shankar)
v3: /** instead of /* (Uma Shankar)
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230309062855.393087-2-suraj.kandpal@intel.com
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-next
Core Changes:
- drm: Add SDP Error Detection Configuration Register (Arun)
Driver Changes:
- Meteor Lake enabling and fixes (RK, Jose, Madhumitha)
- Lock the fbdev obj before vma pin (Tejas)
- DSC fixes (Stanislav)
- Fixes and clean-up on opregion code (Imre)
- More wm/vblank stuff (Ville)
- More general display code organization (Jani)
- DP Fixes (Stanislav, Ville)
- Introduce flags to ignore long HPD and link training issues \
for handling spurious issues on CI (Vinod)
- Plane cleanups and extra registers (Ville)
- Update audio keepalive clock values (Clint)
- Rename find_section to bdb_find_section (Maarten)
- DP SDP CRC16 for 128b132b link layer (Arun)
- Fix various issues with noarm register writes (Ville)
- Fix a few TypeC / MST issues (Imre)
- Create GSC submission targeting HDCP and PXP usages on MTL+ (Suraj)
- Enable HDCP2.x via GSC CS (Suraj)
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZBy56qc9C00tCLOY@intel.com
|
|
DP2.0 E11 defines a new register to facilitate SDP error detection by a
128B/132B capable DPRX device.
v2: Update the macro name to reflect the DP spec(Harry)
Signed-off-by: Arun R Murthy <arun.r.murthy@intel.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230302081532.765821-2-arun.r.murthy@intel.com
|
|
Add a function to get the old MST topology state, required by a
follow-up i915 patch.
While at it clarify the code comment of
drm_atomic_get_new_mst_topology_state() and add _new prefix
to the new state pointer to remind about its difference from the old
state.
v2: Use old_/new_ prefixes for the state pointers. (Ville)
Cc: Lyude Paul <lyude@redhat.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: stable@vger.kernel.org # 6.1
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Lyude Paul <lyude@redhat.com>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230206114856.2665066-3-imre.deak@intel.com
|
|
Atm, drm_dp_remove_payload() uses the same payload state to both get the
vc_start_slot required for the payload removal DPCD message and to
deduct time_slots from vc_start_slot of all payloads after the one being
removed.
The above isn't always correct, as vc_start_slot must be the up-to-date
version contained in the new payload state, but time_slots must be the
one used when the payload was previously added, contained in the old
payload state. The new payload's time_slots can change vs. the old one
if the current atomic commit changes the corresponding mode.
This patch let's drivers pass the old and new payload states to
drm_dp_remove_payload(), but keeps these the same for now in all drivers
not to change the behavior. A follow-up i915 patch will pass in that
driver the correct old and new states to the function.
Cc: Lyude Paul <lyude@redhat.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Karol Herbst <kherbst@redhat.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Wayne Lin <Wayne.Lin@amd.com>
Cc: stable@vger.kernel.org # 6.1
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Lyude Paul <lyude@redhat.com>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230206114856.2665066-2-imre.deak@intel.com
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-next
drm/i915 feature pull #1 for v6.3:
Features and functionality:
- Meteorlake display enabling (Animesh, Luca, Stan, Jouni, Anusha)
- DP MST DSC support (Stan)
- Gamma/degamma readout support for the state checker (Ville)
- Enable SDP split support for DP 2.0 (Vinod)
- Add probe blocking support to i915.force_probe parameter (Rodrigo)
- Enable Xe HP 4tile support (Jonathan)
Refactoring and cleanups:
- Color refactoring, especially related to DSB usage (Ville)
- DSB refactoring (Ville)
- DVO refactoring (Ville)
- Backlight register and logging cleanups (Jani)
- Avoid display direct calls to uncore (Maarten, Jani)
- Add new "soc" sub-directory (Jani)
- Refactor DSC platform support checks (Swati)
Fixes:
- Interlace modes are no longer supported starting at display version 12 (Ankit)
- Use polling read for aux control (Arun)
- DMC firmware no longer requires specific versions (Gustavo)
- Fix PSR flickering and freeze issues (Jouni)
- Fix ICL+ DSI GPIO handling (Jani)
- Ratelimit errors in display engine irqs (Lucas)
- Fix DP MST DSC bpp and timeslot calculations (Stan)
- Fix CDCLK squash and crawl sequences (Ville, Anusha)
- Fix bigjoiner checks for fused pipes (Ville)
- Fix ADP+ degamma LUT size (Ville)
- Fix DVO ch7xxx and sil164 suspend/resume (Ville)
- Fix memory leak in VBT parsing (Xia Fukun)
- Fix VBT packet port selection for dual link DSI (Mikko Kovanen)
- Fix SDP infoframe product string for discrete graphics (Clint)
- Fix VLV/CHV HDMI/DP audio enable (Ville)
- Fix VRR delays and calculations (Ville)
- No longer disable transcoder for PHY test pattern change (Khaled)
- Fix dual PPS handling (Ville)
- Fix timeout and wait for DDI BUF CTL active after enabling (Ankit)
Merges:
- Backmerge drm-next to sync up with v6.2-rc1 (Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87tu0wez34.fsf@intel.com
|
|
The missing DPCD definitions from DP2.0 spec is as follows:
DOWNSPREAD_CTRL (107h):
FIXED_VTOTAL_AS_SDP_EN_IN_PR_ACTIVE (bit 6)
For sink devices that support Adaptive-Sync operation
and Panel Replay
DPRX_FEATURE_ENUMERATION_LIST_CONT_1 (2214h):
ADAPTIVE_SYNC_SDP_SUPPORTED (bit 0)
Bit to check sink device has Adaptive-Sync capability
AS_SDP_FIRST_HALF_LINE_OR_3840_PIXEL_CYCLE_WINDOW_NOT_SUPPORTED (bit 1)
A sink device that clears this bit will generate VSync pulse
leading edge of the HDMI output on the line count at which
Adaptive-Sync SDP is received as long as source device transmits
Adaptive-Sync SDP either in first line or first 3840 pixel cycles
of the line whichever occurs first.
VSC_EXT_SDP_FRAMEWORK_VERSION_1_SUPPORTED (bit 4)
Bit to check sink device has SDP framework version 1 capability
Signed-off-by: Sung Joon Kim <Sungjoon.Kim@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|