| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull more RISC-V updates from Palmer Dabbelt:
- The kernel now dynamically probes for misaligned access speed, as
opposed to relying on a table of known implementations.
- Support for non-coherent devices on systems using the Andes AX45MP
core, including the RZ/Five SoCs.
- Support for the V extension in ptrace(), again.
- Support for KASLR.
- Support for the BPF prog pack allocator in RISC-V.
- A handful of bug fixes and cleanups.
* tag 'riscv-for-linus-6.6-mw2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (25 commits)
soc: renesas: Kconfig: For ARCH_R9A07G043 select the required configs if dependencies are met
riscv: Kconfig.errata: Add dependency for RISCV_SBI in ERRATA_ANDES config
riscv: Kconfig.errata: Drop dependency for MMU in ERRATA_ANDES_CMO config
riscv: Kconfig: Select DMA_DIRECT_REMAP only if MMU is enabled
bpf, riscv: use prog pack allocator in the BPF JIT
riscv: implement a memset like function for text
riscv: extend patch_text_nosync() for multiple pages
bpf: make bpf_prog_pack allocator portable
riscv: libstub: Implement KASLR by using generic functions
libstub: Fix compilation warning for rv32
arm64: libstub: Move KASLR handling functions to kaslr.c
riscv: Dump out kernel offset information on panic
riscv: Introduce virtual kernel mapping KASLR
RISC-V: Add ptrace support for vectors
soc: renesas: Kconfig: Select the required configs for RZ/Five SoC
cache: Add L2 cache management for Andes AX45MP RISC-V core
dt-bindings: cache: andestech,ax45mp-cache: Add DT binding documentation for L2 cache controller
riscv: mm: dma-noncoherent: nonstandard cache operations support
riscv: errata: Add Andes alternative ports
riscv: asm: vendorid_list: Add Andes Technology to the vendors list
...
|
|
Puranjay Mohan <puranjay12@gmail.com> says:
Here is some data to prove the V2 fixes the problem:
Without this series:
root@rv-selftester:~/src/kselftest/bpf# time ./test_tag
test_tag: OK (40945 tests)
real 7m47.562s
user 0m24.145s
sys 6m37.064s
With this series applied:
root@rv-selftester:~/src/selftest/bpf# time ./test_tag
test_tag: OK (40945 tests)
real 7m29.472s
user 0m25.865s
sys 6m18.401s
BPF programs currently consume a page each on RISCV. For systems with many BPF
programs, this adds significant pressure to instruction TLB. High iTLB pressure
usually causes slow down for the whole system.
Song Liu introduced the BPF prog pack allocator[1] to mitigate the above issue.
It packs multiple BPF programs into a single huge page. It is currently only
enabled for the x86_64 BPF JIT.
I enabled this allocator on the ARM64 BPF JIT[2]. It is being reviewed now.
This patch series enables the BPF prog pack allocator for the RISCV BPF JIT.
======================================================
Performance Analysis of prog pack allocator on RISCV64
======================================================
Test setup:
===========
Host machine: Debian GNU/Linux 11 (bullseye)
Qemu Version: QEMU emulator version 8.0.3 (Debian 1:8.0.3+dfsg-1)
u-boot-qemu Version: 2023.07+dfsg-1
opensbi Version: 1.3-1
To test the performance of the BPF prog pack allocator on RV, a stresser
tool[4] linked below was built. This tool loads 8 BPF programs on the system and
triggers 5 of them in an infinite loop by doing system calls.
The runner script starts 20 instances of the above which loads 8*20=160 BPF
programs on the system, 5*20=100 of which are being constantly triggered.
The script is passed a command which would be run in the above environment.
The script was run with following perf command:
./run.sh "perf stat -a \
-e iTLB-load-misses \
-e dTLB-load-misses \
-e dTLB-store-misses \
-e instructions \
--timeout 60000"
The output of the above command is discussed below before and after enabling the
BPF prog pack allocator.
The tests were run on qemu-system-riscv64 with 8 cpus, 16G memory. The rootfs
was created using Bjorn's riscv-cross-builder[5] docker container linked below.
Results
=======
Before enabling prog pack allocator:
------------------------------------
Performance counter stats for 'system wide':
4939048 iTLB-load-misses
5468689 dTLB-load-misses
465234 dTLB-store-misses
1441082097998 instructions
60.045791200 seconds time elapsed
After enabling prog pack allocator:
-----------------------------------
Performance counter stats for 'system wide':
3430035 iTLB-load-misses
5008745 dTLB-load-misses
409944 dTLB-store-misses
1441535637988 instructions
60.046296600 seconds time elapsed
Improvements in metrics
=======================
It was expected that the iTLB-load-misses would decrease as now a single huge
page is used to keep all the BPF programs compared to a single page for each
program earlier.
--------------------------------------------
The improvement in iTLB-load-misses: -30.5 %
--------------------------------------------
I repeated this expriment more than 100 times in different setups and the
improvement was always greater than 30%.
This patch series is boot tested on the Starfive VisionFive 2 board[6].
The performance analysis was not done on the board because it doesn't
expose iTLB-load-misses, etc. The stresser program was run on the board to test
the loading and unloading of BPF programs
[1] https://lore.kernel.org/bpf/20220204185742.271030-1-song@kernel.org/
[2] https://lore.kernel.org/all/20230626085811.3192402-1-puranjay12@gmail.com/
[3] https://lore.kernel.org/all/20230626085811.3192402-2-puranjay12@gmail.com/
[4] https://github.com/puranjaymohan/BPF-Allocator-Bench
[5] https://github.com/bjoto/riscv-cross-builder
[6] https://www.starfivetech.com/en/site/boards
* b4-shazam-merge:
bpf, riscv: use prog pack allocator in the BPF JIT
riscv: implement a memset like function for text
riscv: extend patch_text_nosync() for multiple pages
bpf: make bpf_prog_pack allocator portable
Link: https://lore.kernel.org/r/20230831131229.497941-1-puranjay12@gmail.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking updates from Jakub Kicinski:
"Including fixes from netfilter and bpf.
Current release - regressions:
- eth: stmmac: fix failure to probe without MAC interface specified
Current release - new code bugs:
- docs: netlink: fix missing classic_netlink doc reference
Previous releases - regressions:
- deal with integer overflows in kmalloc_reserve()
- use sk_forward_alloc_get() in sk_get_meminfo()
- bpf_sk_storage: fix the missing uncharge in sk_omem_alloc
- fib: avoid warn splat in flow dissector after packet mangling
- skb_segment: call zero copy functions before using skbuff frags
- eth: sfc: check for zero length in EF10 RX prefix
Previous releases - always broken:
- af_unix: fix msg_controllen test in scm_pidfd_recv() for
MSG_CMSG_COMPAT
- xsk: fix xsk_build_skb() dereferencing possible ERR_PTR()
- netfilter:
- nft_exthdr: fix non-linear header modification
- xt_u32, xt_sctp: validate user space input
- nftables: exthdr: fix 4-byte stack OOB write
- nfnetlink_osf: avoid OOB read
- one more fix for the garbage collection work from last release
- igmp: limit igmpv3_newpack() packet size to IP_MAX_MTU
- bpf, sockmap: fix preempt_rt splat when using raw_spin_lock_t
- handshake: fix null-deref in handshake_nl_done_doit()
- ip: ignore dst hint for multipath routes to ensure packets are
hashed across the nexthops
- phy: micrel:
- correct bit assignments for cable test errata
- disable EEE according to the KSZ9477 errata
Misc:
- docs/bpf: document compile-once-run-everywhere (CO-RE) relocations
- Revert "net: macsec: preserve ingress frame ordering", it appears
to have been developed against an older kernel, problem doesn't
exist upstream"
* tag 'net-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (95 commits)
net: enetc: distinguish error from valid pointers in enetc_fixup_clear_rss_rfs()
Revert "net: team: do not use dynamic lockdep key"
net: hns3: remove GSO partial feature bit
net: hns3: fix the port information display when sfp is absent
net: hns3: fix invalid mutex between tc qdisc and dcb ets command issue
net: hns3: fix debugfs concurrency issue between kfree buffer and read
net: hns3: fix byte order conversion issue in hclge_dbg_fd_tcam_read()
net: hns3: Support query tx timeout threshold by debugfs
net: hns3: fix tx timeout issue
net: phy: Provide Module 4 KSZ9477 errata (DS80000754C)
netfilter: nf_tables: Unbreak audit log reset
netfilter: ipset: add the missing IP_SET_HASH_WITH_NET0 macro for ip_set_hash_netportnet.c
netfilter: nft_set_rbtree: skip sync GC for new elements in this transaction
netfilter: nf_tables: uapi: Describe NFTA_RULE_CHAIN_ID
netfilter: nfnetlink_osf: avoid OOB read
netfilter: nftables: exthdr: fix 4-byte stack OOB write
selftests/bpf: Check bpf_sk_storage has uncharged sk_omem_alloc
bpf: bpf_sk_storage: Fix the missing uncharge in sk_omem_alloc
bpf: bpf_sk_storage: Fix invalid wait context lockdep report
s390/bpf: Pass through tail call counter in trampolines
...
|
|
The bpf_prog_pack allocator currently uses module_alloc() and
module_memfree() to allocate and free memory. This is not portable
because different architectures use different methods for allocating
memory for BPF programs. Like ARM64 and riscv use vmalloc()/vfree().
Use bpf_jit_alloc_exec() and bpf_jit_free_exec() for memory management
in bpf_prog_pack allocator. Other architectures can override these with
their implementation and will be able to use bpf_prog_pack directly.
On architectures that don't override bpf_jit_alloc/free_exec() this is
basically a NOP.
Signed-off-by: Puranjay Mohan <puranjay12@gmail.com>
Acked-by: Song Liu <song@kernel.org>
Acked-by: Björn Töpel <bjorn@kernel.org>
Tested-by: Björn Töpel <bjorn@rivosinc.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20230831131229.497941-2-puranjay12@gmail.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
The commit c83597fa5dc6 ("bpf: Refactor some inode/task/sk storage functions
for reuse"), refactored the bpf_{sk,task,inode}_storage_free() into
bpf_local_storage_unlink_nolock() which then later renamed to
bpf_local_storage_destroy(). The commit accidentally passed the
"bool uncharge_mem = false" argument to bpf_selem_unlink_storage_nolock()
which then stopped the uncharge from happening to the sk->sk_omem_alloc.
This missing uncharge only happens when the sk is going away (during
__sk_destruct).
This patch fixes it by always passing "uncharge_mem = true". It is a
noop to the task/inode/cgroup storage because they do not have the
map_local_storage_(un)charge enabled in the map_ops. A followup patch
will be done in bpf-next to remove the uncharge_mem argument.
A selftest is added in the next patch.
Fixes: c83597fa5dc6 ("bpf: Refactor some inode/task/sk storage functions for reuse")
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230901231129.578493-3-martin.lau@linux.dev
|
|
'./test_progs -t test_local_storage' reported a splat:
[ 27.137569] =============================
[ 27.138122] [ BUG: Invalid wait context ]
[ 27.138650] 6.5.0-03980-gd11ae1b16b0a #247 Tainted: G O
[ 27.139542] -----------------------------
[ 27.140106] test_progs/1729 is trying to lock:
[ 27.140713] ffff8883ef047b88 (stock_lock){-.-.}-{3:3}, at: local_lock_acquire+0x9/0x130
[ 27.141834] other info that might help us debug this:
[ 27.142437] context-{5:5}
[ 27.142856] 2 locks held by test_progs/1729:
[ 27.143352] #0: ffffffff84bcd9c0 (rcu_read_lock){....}-{1:3}, at: rcu_lock_acquire+0x4/0x40
[ 27.144492] #1: ffff888107deb2c0 (&storage->lock){..-.}-{2:2}, at: bpf_local_storage_update+0x39e/0x8e0
[ 27.145855] stack backtrace:
[ 27.146274] CPU: 0 PID: 1729 Comm: test_progs Tainted: G O 6.5.0-03980-gd11ae1b16b0a #247
[ 27.147550] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
[ 27.149127] Call Trace:
[ 27.149490] <TASK>
[ 27.149867] dump_stack_lvl+0x130/0x1d0
[ 27.152609] dump_stack+0x14/0x20
[ 27.153131] __lock_acquire+0x1657/0x2220
[ 27.153677] lock_acquire+0x1b8/0x510
[ 27.157908] local_lock_acquire+0x29/0x130
[ 27.159048] obj_cgroup_charge+0xf4/0x3c0
[ 27.160794] slab_pre_alloc_hook+0x28e/0x2b0
[ 27.161931] __kmem_cache_alloc_node+0x51/0x210
[ 27.163557] __kmalloc+0xaa/0x210
[ 27.164593] bpf_map_kzalloc+0xbc/0x170
[ 27.165147] bpf_selem_alloc+0x130/0x510
[ 27.166295] bpf_local_storage_update+0x5aa/0x8e0
[ 27.167042] bpf_fd_sk_storage_update_elem+0xdb/0x1a0
[ 27.169199] bpf_map_update_value+0x415/0x4f0
[ 27.169871] map_update_elem+0x413/0x550
[ 27.170330] __sys_bpf+0x5e9/0x640
[ 27.174065] __x64_sys_bpf+0x80/0x90
[ 27.174568] do_syscall_64+0x48/0xa0
[ 27.175201] entry_SYSCALL_64_after_hwframe+0x6e/0xd8
[ 27.175932] RIP: 0033:0x7effb40e41ad
[ 27.176357] Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d8
[ 27.179028] RSP: 002b:00007ffe64c21fc8 EFLAGS: 00000202 ORIG_RAX: 0000000000000141
[ 27.180088] RAX: ffffffffffffffda RBX: 00007ffe64c22768 RCX: 00007effb40e41ad
[ 27.181082] RDX: 0000000000000020 RSI: 00007ffe64c22008 RDI: 0000000000000002
[ 27.182030] RBP: 00007ffe64c21ff0 R08: 0000000000000000 R09: 00007ffe64c22788
[ 27.183038] R10: 0000000000000064 R11: 0000000000000202 R12: 0000000000000000
[ 27.184006] R13: 00007ffe64c22788 R14: 00007effb42a1000 R15: 0000000000000000
[ 27.184958] </TASK>
It complains about acquiring a local_lock while holding a raw_spin_lock.
It means it should not allocate memory while holding a raw_spin_lock
since it is not safe for RT.
raw_spin_lock is needed because bpf_local_storage supports tracing
context. In particular for task local storage, it is easy to
get a "current" task PTR_TO_BTF_ID in tracing bpf prog.
However, task (and cgroup) local storage has already been moved to
bpf mem allocator which can be used after raw_spin_lock.
The splat is for the sk storage. For sk (and inode) storage,
it has not been moved to bpf mem allocator. Using raw_spin_lock or not,
kzalloc(GFP_ATOMIC) could theoretically be unsafe in tracing context.
However, the local storage helper requires a verifier accepted
sk pointer (PTR_TO_BTF_ID), it is hypothetical if that (mean running
a bpf prog in a kzalloc unsafe context and also able to hold a verifier
accepted sk pointer) could happen.
This patch avoids kzalloc after raw_spin_lock to silent the splat.
There is an existing kzalloc before the raw_spin_lock. At that point,
a kzalloc is very likely required because a lookup has just been done
before. Thus, this patch always does the kzalloc before acquiring
the raw_spin_lock and remove the later kzalloc usage after the
raw_spin_lock. After this change, it will have a charge and then
uncharge during the syscall bpf_map_update_elem() code path.
This patch opts for simplicity and not continue the old
optimization to save one charge and uncharge.
This issue is dated back to the very first commit of bpf_sk_storage
which had been refactored multiple times to create task, inode, and
cgroup storage. This patch uses a Fixes tag with a more recent
commit that should be easier to do backport.
Fixes: b00fa38a9c1c ("bpf: Enable non-atomic allocations in local storage")
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230901231129.578493-2-martin.lau@linux.dev
|
|
__bpf_prog_enter_recur() assigns bpf_tramp_run_ctx::saved_run_ctx before
performing the recursion check which means in case of a recursion
__bpf_prog_exit_recur() uses the previously set bpf_tramp_run_ctx::saved_run_ctx
value.
__bpf_prog_enter_sleepable_recur() assigns bpf_tramp_run_ctx::saved_run_ctx
after the recursion check which means in case of a recursion
__bpf_prog_exit_sleepable_recur() uses an uninitialized value. This does not
look right. If I read the entry trampoline code right, then bpf_tramp_run_ctx
isn't initialized upfront.
Align __bpf_prog_enter_sleepable_recur() with __bpf_prog_enter_recur() and
set bpf_tramp_run_ctx::saved_run_ctx before the recursion check is made.
Remove the assignment of saved_run_ctx in kern_sys_bpf() since it happens
a few cycles later.
Fixes: e384c7b7b46d0 ("bpf, x86: Create bpf_tramp_run_ctx on the caller thread's stack")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20230830080405.251926-3-bigeasy@linutronix.de
|
|
If __bpf_prog_enter_sleepable_recur() detects recursion then it returns
0 without undoing rcu_read_lock_trace(), migrate_disable() or
decrementing the recursion counter. This is fine in the JIT case because
the JIT code will jump in the 0 case to the end and invoke the matching
exit trampoline (__bpf_prog_exit_sleepable_recur()).
This is not the case in kern_sys_bpf() which returns directly to the
caller with an error code.
Add __bpf_prog_exit_sleepable_recur() as clean up in the recursion case.
Fixes: b1d18a7574d0d ("bpf: Extend sys_bpf commands for bpf_syscall programs.")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20230830080405.251926-2-bigeasy@linutronix.de
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes updates from Masami Hiramatsu:
- kprobes: use struct_size() for variable size kretprobe_instance data
structure.
- eprobe: Simplify trace_eprobe list iteration.
- probe events: Data structure field access support on BTF argument.
- Update BTF argument support on the functions in the kernel
loadable modules (only loaded modules are supported).
- Move generic BTF access function (search function prototype and
get function parameters) to a separated file.
- Add a function to search a member of data structure in BTF.
- Support accessing BTF data structure member from probe args by
C-like arrow('->') and dot('.') operators. e.g.
't sched_switch next=next->pid vruntime=next->se.vruntime'
- Support accessing BTF data structure member from $retval. e.g.
'f getname_flags%return +0($retval->name):string'
- Add string type checking if BTF type info is available. This will
reject if user specify ":string" type for non "char pointer"
type.
- Automatically assume the fprobe event as a function return event
if $retval is used.
- selftests/ftrace: Add BTF data field access test cases.
- Documentation: Update fprobe event example with BTF data field.
* tag 'probes-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
Documentation: tracing: Update fprobe event example with BTF field
selftests/ftrace: Add BTF fields access testcases
tracing/fprobe-event: Assume fprobe is a return event by $retval
tracing/probes: Add string type check with BTF
tracing/probes: Support BTF field access from $retval
tracing/probes: Support BTF based data structure field access
tracing/probes: Add a function to search a member of a struct/union
tracing/probes: Move finding func-proto API and getting func-param API to trace_btf
tracing/probes: Support BTF argument on module functions
tracing/eprobe: Iterate trace_eprobe directly
kernel: kprobes: Use struct_size()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"Core:
- Increase size limits for to-be-sent skb frag allocations. This
allows tun, tap devices and packet sockets to better cope with
large writes operations
- Store netdevs in an xarray, to simplify iterating over netdevs
- Refactor nexthop selection for multipath routes
- Improve sched class lifetime handling
- Add backup nexthop ID support for bridge
- Implement drop reasons support in openvswitch
- Several data races annotations and fixes
- Constify the sk parameter of routing functions
- Prepend kernel version to netconsole message
Protocols:
- Implement support for TCP probing the peer being under memory
pressure
- Remove hard coded limitation on IPv6 specific info placement inside
the socket struct
- Get rid of sysctl_tcp_adv_win_scale and use an auto-estimated per
socket scaling factor
- Scaling-up the IPv6 expired route GC via a separated list of
expiring routes
- In-kernel support for the TLS alert protocol
- Better support for UDP reuseport with connected sockets
- Add NEXT-C-SID support for SRv6 End.X behavior, reducing the SR
header size
- Get rid of additional ancillary per MPTCP connection struct socket
- Implement support for BPF-based MPTCP packet schedulers
- Format MPTCP subtests selftests results in TAP
- Several new SMC 2.1 features including unique experimental options,
max connections per lgr negotiation, max links per lgr negotiation
BPF:
- Multi-buffer support in AF_XDP
- Add multi uprobe BPF links for attaching multiple uprobes and usdt
probes, which is significantly faster and saves extra fds
- Implement an fd-based tc BPF attach API (TCX) and BPF link support
on top of it
- Add SO_REUSEPORT support for TC bpf_sk_assign
- Support new instructions from cpu v4 to simplify the generated code
and feature completeness, for x86, arm64, riscv64
- Support defragmenting IPv(4|6) packets in BPF
- Teach verifier actual bounds of bpf_get_smp_processor_id() and fix
perf+libbpf issue related to custom section handling
- Introduce bpf map element count and enable it for all program types
- Add a BPF hook in sys_socket() to change the protocol ID from
IPPROTO_TCP to IPPROTO_MPTCP to cover migration for legacy
- Introduce bpf_me_mcache_free_rcu() and fix OOM under stress
- Add uprobe support for the bpf_get_func_ip helper
- Check skb ownership against full socket
- Support for up to 12 arguments in BPF trampoline
- Extend link_info for kprobe_multi and perf_event links
Netfilter:
- Speed-up process exit by aborting ruleset validation if a fatal
signal is pending
- Allow NLA_POLICY_MASK to be used with BE16/BE32 types
Driver API:
- Page pool optimizations, to improve data locality and cache usage
- Introduce ndo_hwtstamp_get() and ndo_hwtstamp_set() to avoid the
need for raw ioctl() handling in drivers
- Simplify genetlink dump operations (doit/dumpit) providing them the
common information already populated in struct genl_info
- Extend and use the yaml devlink specs to [re]generate the split ops
- Introduce devlink selective dumps, to allow SF filtering SF based
on handle and other attributes
- Add yaml netlink spec for netlink-raw families, allow route, link
and address related queries via the ynl tool
- Remove phylink legacy mode support
- Support offload LED blinking to phy
- Add devlink port function attributes for IPsec
New hardware / drivers:
- Ethernet:
- Broadcom ASP 2.0 (72165) ethernet controller
- MediaTek MT7988 SoC
- Texas Instruments AM654 SoC
- Texas Instruments IEP driver
- Atheros qca8081 phy
- Marvell 88Q2110 phy
- NXP TJA1120 phy
- WiFi:
- MediaTek mt7981 support
- Can:
- Kvaser SmartFusion2 PCI Express devices
- Allwinner T113 controllers
- Texas Instruments tcan4552/4553 chips
- Bluetooth:
- Intel Gale Peak
- Qualcomm WCN3988 and WCN7850
- NXP AW693 and IW624
- Mediatek MT2925
Drivers:
- Ethernet NICs:
- nVidia/Mellanox:
- mlx5:
- support UDP encapsulation in packet offload mode
- IPsec packet offload support in eswitch mode
- improve aRFS observability by adding new set of counters
- extends MACsec offload support to cover RoCE traffic
- dynamic completion EQs
- mlx4:
- convert to use auxiliary bus instead of custom interface
logic
- Intel
- ice:
- implement switchdev bridge offload, even for LAG
interfaces
- implement SRIOV support for LAG interfaces
- igc:
- add support for multiple in-flight TX timestamps
- Broadcom:
- bnxt:
- use the unified RX page pool buffers for XDP and non-XDP
- use the NAPI skb allocation cache
- OcteonTX2:
- support Round Robin scheduling HTB offload
- TC flower offload support for SPI field
- Freescale:
- add XDP_TX feature support
- AMD:
- ionic: add support for PCI FLR event
- sfc:
- basic conntrack offload
- introduce eth, ipv4 and ipv6 pedit offloads
- ST Microelectronics:
- stmmac: maximze PTP timestamping resolution
- Virtual NICs:
- Microsoft vNIC:
- batch ringing RX queue doorbell on receiving packets
- add page pool for RX buffers
- Virtio vNIC:
- add per queue interrupt coalescing support
- Google vNIC:
- add queue-page-list mode support
- Ethernet high-speed switches:
- nVidia/Mellanox (mlxsw):
- add port range matching tc-flower offload
- permit enslavement to netdevices with uppers
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- convert to phylink_pcs
- Renesas:
- r8A779fx: add speed change support
- rzn1: enables vlan support
- Ethernet PHYs:
- convert mv88e6xxx to phylink_pcs
- WiFi:
- Qualcomm Wi-Fi 7 (ath12k):
- extremely High Throughput (EHT) PHY support
- RealTek (rtl8xxxu):
- enable AP mode for: RTL8192FU, RTL8710BU (RTL8188GU),
RTL8192EU and RTL8723BU
- RealTek (rtw89):
- Introduce Time Averaged SAR (TAS) support
- Connector:
- support for event filtering"
* tag 'net-next-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1806 commits)
net: ethernet: mtk_wed: minor change in wed_{tx,rx}info_show
net: ethernet: mtk_wed: add some more info in wed_txinfo_show handler
net: stmmac: clarify difference between "interface" and "phy_interface"
r8152: add vendor/device ID pair for D-Link DUB-E250
devlink: move devlink_notify_register/unregister() to dev.c
devlink: move small_ops definition into netlink.c
devlink: move tracepoint definitions into core.c
devlink: push linecard related code into separate file
devlink: push rate related code into separate file
devlink: push trap related code into separate file
devlink: use tracepoint_enabled() helper
devlink: push region related code into separate file
devlink: push param related code into separate file
devlink: push resource related code into separate file
devlink: push dpipe related code into separate file
devlink: move and rename devlink_dpipe_send_and_alloc_skb() helper
devlink: push shared buffer related code into separate file
devlink: push port related code into separate file
devlink: push object register/unregister notifications into separate helpers
inet: fix IP_TRANSPARENT error handling
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs timestamp updates from Christian Brauner:
"This adds VFS support for multi-grain timestamps and converts tmpfs,
xfs, ext4, and btrfs to use them. This carries acks from all relevant
filesystems.
The VFS always uses coarse-grained timestamps when updating the ctime
and mtime after a change. This has the benefit of allowing filesystems
to optimize away a lot of metadata updates, down to around 1 per
jiffy, even when a file is under heavy writes.
Unfortunately, this has always been an issue when we're exporting via
NFSv3, which relies on timestamps to validate caches. A lot of changes
can happen in a jiffy, so timestamps aren't sufficient to help the
client decide to invalidate the cache.
Even with NFSv4, a lot of exported filesystems don't properly support
a change attribute and are subject to the same problems with timestamp
granularity. Other applications have similar issues with timestamps
(e.g., backup applications).
If we were to always use fine-grained timestamps, that would improve
the situation, but that becomes rather expensive, as the underlying
filesystem would have to log a lot more metadata updates.
This introduces fine-grained timestamps that are used when they are
actively queried.
This uses the 31st bit of the ctime tv_nsec field to indicate that
something has queried the inode for the mtime or ctime. When this flag
is set, on the next mtime or ctime update, the kernel will fetch a
fine-grained timestamp instead of the usual coarse-grained one.
As POSIX generally mandates that when the mtime changes, the ctime
must also change the kernel always stores normalized ctime values, so
only the first 30 bits of the tv_nsec field are ever used.
Filesytems can opt into this behavior by setting the FS_MGTIME flag in
the fstype. Filesystems that don't set this flag will continue to use
coarse-grained timestamps.
Various preparatory changes, fixes and cleanups are included:
- Fixup all relevant places where POSIX requires updating ctime
together with mtime. This is a wide-range of places and all
maintainers provided necessary Acks.
- Add new accessors for inode->i_ctime directly and change all
callers to rely on them. Plain accesses to inode->i_ctime are now
gone and it is accordingly rename to inode->__i_ctime and commented
as requiring accessors.
- Extend generic_fillattr() to pass in a request mask mirroring in a
sense the statx() uapi. This allows callers to pass in a request
mask to only get a subset of attributes filled in.
- Rework timestamp updates so it's possible to drop the @now
parameter the update_time() inode operation and associated helpers.
- Add inode_update_timestamps() and convert all filesystems to it
removing a bunch of open-coding"
* tag 'v6.6-vfs.ctime' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (107 commits)
btrfs: convert to multigrain timestamps
ext4: switch to multigrain timestamps
xfs: switch to multigrain timestamps
tmpfs: add support for multigrain timestamps
fs: add infrastructure for multigrain timestamps
fs: drop the timespec64 argument from update_time
xfs: have xfs_vn_update_time gets its own timestamp
fat: make fat_update_time get its own timestamp
fat: remove i_version handling from fat_update_time
ubifs: have ubifs_update_time use inode_update_timestamps
btrfs: have it use inode_update_timestamps
fs: drop the timespec64 arg from generic_update_time
fs: pass the request_mask to generic_fillattr
fs: remove silly warning from current_time
gfs2: fix timestamp handling on quota inodes
fs: rename i_ctime field to __i_ctime
selinux: convert to ctime accessor functions
security: convert to ctime accessor functions
apparmor: convert to ctime accessor functions
sunrpc: convert to ctime accessor functions
...
|
|
Commit 9e7a4d9831e8 ("bpf: Allow LSM programs to use bpf spin locks")
disabled bpf_spin_lock usage in sleepable progs, stating:
Sleepable LSM programs can be preempted which means that allowng spin
locks will need more work (disabling preemption and the verifier
ensuring that no sleepable helpers are called when a spin lock is
held).
This patch disables preemption before grabbing bpf_spin_lock. The second
requirement above "no sleepable helpers are called when a spin lock is
held" is implicitly enforced by current verifier logic due to helper
calls in spin_lock CS being disabled except for a few exceptions, none
of which sleep.
Due to above preemption changes, bpf_spin_lock CS can also be considered
a RCU CS, so verifier's in_rcu_cs check is modified to account for this.
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/r/20230821193311.3290257-7-davemarchevsky@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
An earlier patch in the series ensures that the underlying memory of
nodes with bpf_refcount - which can have multiple owners - is not reused
until RCU grace period has elapsed. This prevents
use-after-free with non-owning references that may point to
recently-freed memory. While RCU read lock is held, it's safe to
dereference such a non-owning ref, as by definition RCU GP couldn't have
elapsed and therefore underlying memory couldn't have been reused.
From the perspective of verifier "trustedness" non-owning refs to
refcounted nodes are now trusted only in RCU CS and therefore should no
longer pass is_trusted_reg, but rather is_rcu_reg. Let's mark them
MEM_RCU in order to reflect this new state.
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/r/20230821193311.3290257-6-davemarchevsky@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Now that all reported issues are fixed, bpf_refcount_acquire can be
turned back on. Also reenable all bpf_refcount-related tests which were
disabled.
This a revert of:
* commit f3514a5d6740 ("selftests/bpf: Disable newly-added 'owner' field test until refcount re-enabled")
* commit 7deca5eae833 ("bpf: Disable bpf_refcount_acquire kfunc calls until race conditions are fixed")
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20230821193311.3290257-5-davemarchevsky@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This is the final fix for the use-after-free scenario described in
commit 7793fc3babe9 ("bpf: Make bpf_refcount_acquire fallible for
non-owning refs"). That commit, by virtue of changing
bpf_refcount_acquire's refcount_inc to a refcount_inc_not_zero, fixed
the "refcount incr on 0" splat. The not_zero check in
refcount_inc_not_zero, though, still occurs on memory that could have
been free'd and reused, so the commit didn't properly fix the root
cause.
This patch actually fixes the issue by free'ing using the recently-added
bpf_mem_free_rcu, which ensures that the memory is not reused until
RCU grace period has elapsed. If that has happened then
there are no non-owning references alive that point to the
recently-free'd memory, so it can be safely reused.
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20230821193311.3290257-4-davemarchevsky@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
refcount_acquire
It's straightforward to prove that kptr_struct_meta must be non-NULL for
any valid call to these kfuncs:
* btf_parse_struct_metas in btf.c creates a btf_struct_meta for any
struct in user BTF with a special field (e.g. bpf_refcount,
{rb,list}_node). These are stored in that BTF's struct_meta_tab.
* __process_kf_arg_ptr_to_graph_node in verifier.c ensures that nodes
have {rb,list}_node field and that it's at the correct offset.
Similarly, check_kfunc_args ensures bpf_refcount field existence for
node param to bpf_refcount_acquire.
* So a btf_struct_meta must have been created for the struct type of
node param to these kfuncs
* That BTF and its struct_meta_tab are guaranteed to still be around.
Any arbitrary {rb,list} node the BPF program interacts with either:
came from bpf_obj_new or a collection removal kfunc in the same
program, in which case the BTF is associated with the program and
still around; or came from bpf_kptr_xchg, in which case the BTF was
associated with the map and is still around
Instead of silently continuing with NULL struct_meta, which caused
confusing bugs such as those addressed by commit 2140a6e3422d ("bpf: Set
kptr_struct_meta for node param to list and rbtree insert funcs"), let's
error out. Then, at runtime, we can confidently say that the
implementations of these kfuncs were given a non-NULL kptr_struct_meta,
meaning that special-field-specific functionality like
bpf_obj_free_fields and the bpf_obj_drop change introduced later in this
series are guaranteed to execute.
This patch doesn't change functionality, just makes it easier to reason
about existing functionality.
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20230821193311.3290257-2-davemarchevsky@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Currently, in function bpf_obj_free_fields(), for local kptr,
a warning will be issued if the struct does not contain any
special fields. But actually the kernel seems totally okay
with a local kptr without any special fields. Permitting
no special fields also aligns with future percpu kptr which
also allows no special fields.
Acked-by: Dave Marchevsky <davemarchevsky@fb.com>
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20230824063417.201925-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
After we converted the capabilities of our networking-bpf program from
cap_sys_admin to cap_net_admin+cap_bpf, our networking-bpf program
failed to start. Because it failed the bpf verifier, and the error log
is "R3 pointer comparison prohibited".
A simple reproducer as follows,
SEC("cls-ingress")
int ingress(struct __sk_buff *skb)
{
struct iphdr *iph = (void *)(long)skb->data + sizeof(struct ethhdr);
if ((long)(iph + 1) > (long)skb->data_end)
return TC_ACT_STOLEN;
return TC_ACT_OK;
}
Per discussion with Yonghong and Alexei [1], comparison of two packet
pointers is not a pointer leak. This patch fixes it.
Our local kernel is 6.1.y and we expect this fix to be backported to
6.1.y, so stable is CCed.
[1]. https://lore.kernel.org/bpf/CAADnVQ+Nmspr7Si+pxWn8zkE7hX-7s93ugwC+94aXSy4uQ9vBg@mail.gmail.com/
Suggested-by: Yonghong Song <yonghong.song@linux.dev>
Suggested-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230823020703.3790-2-laoar.shao@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Since the btf returned from bpf_get_btf_vmlinux() only covers functions in
the vmlinux, BTF argument is not available on the functions in the modules.
Use bpf_find_btf_id() instead of bpf_get_btf_vmlinux()+btf_find_name_kind()
so that BTF argument can find the correct struct btf and btf_type in it.
With this fix, fprobe events can use `$arg*` on module functions as below
# grep nf_log_ip_packet /proc/kallsyms
ffffffffa0005c00 t nf_log_ip_packet [nf_log_syslog]
ffffffffa0005bf0 t __pfx_nf_log_ip_packet [nf_log_syslog]
# echo 'f nf_log_ip_packet $arg*' > dynamic_events
# cat dynamic_events
f:fprobes/nf_log_ip_packet__entry nf_log_ip_packet net=net pf=pf hooknum=hooknum skb=skb in=in out=out loginfo=loginfo prefix=prefix
To support the module's btf which is removable, the struct btf needs to be
ref-counted. So this also records the btf in the traceprobe_parse_context
and returns the refcount when the parse has done.
Link: https://lore.kernel.org/all/169272154223.160970.3507930084247934031.stgit@devnote2/
Suggested-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The commit being fixed introduced a hunk into check_func_arg_reg_off
that bypasses reg->off == 0 enforcement when offset points to a graph
node or root. This might possibly be done for treating bpf_rbtree_remove
and others as KF_RELEASE and then later check correct reg->off in helper
argument checks.
But this is not the case, those helpers are already not KF_RELEASE and
permit non-zero reg->off and verify it later to match the subobject in
BTF type.
However, this logic leads to bpf_obj_drop permitting free of register
arguments with non-zero offset when they point to a graph root or node
within them, which is not ok.
For instance:
struct foo {
int i;
int j;
struct bpf_rb_node node;
};
struct foo *f = bpf_obj_new(typeof(*f));
if (!f) ...
bpf_obj_drop(f); // OK
bpf_obj_drop(&f->i); // still ok from verifier PoV
bpf_obj_drop(&f->node); // Not OK, but permitted right now
Fix this by dropping the whole part of code altogether.
Fixes: 6a3cd3318ff6 ("bpf: Migrate release_on_unlock logic to non-owning ref semantics")
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20230822175140.1317749-2-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
When reviewing local percpu kptr support, Alexei discovered a bug
wherea bpf_kptr_xchg() may succeed even if the map value kptr type and
locally allocated obj type do not match ([1]). Missed struct btf_id
comparison is the reason for the bug. This patch added such struct btf_id
comparison and will flag verification failure if types do not match.
[1] https://lore.kernel.org/bpf/20230819002907.io3iphmnuk43xblu@macbook-pro-8.dhcp.thefacebook.com/#t
Reported-by: Alexei Starovoitov <ast@kernel.org>
Fixes: 738c96d5e2e3 ("bpf: Allow local kptrs to be exchanged via bpf_kptr_xchg")
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20230822050053.2886960-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Adding support to specify pid for uprobe_multi link and the uprobes
are created only for task with given pid value.
Using the consumer.filter filter callback for that, so the task gets
filtered during the uprobe installation.
We still need to check the task during runtime in the uprobe handler,
because the handler could get executed if there's another system
wide consumer on the same uprobe (thanks Oleg for the insight).
Cc: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20230809083440.3209381-6-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Adding support to specify cookies array for uprobe_multi link.
The cookies array share indexes and length with other uprobe_multi
arrays (offsets/ref_ctr_offsets).
The cookies[i] value defines cookie for i-the uprobe and will be
returned by bpf_get_attach_cookie helper when called from ebpf
program hooked to that specific uprobe.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20230809083440.3209381-5-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Adding new multi uprobe link that allows to attach bpf program
to multiple uprobes.
Uprobes to attach are specified via new link_create uprobe_multi
union:
struct {
__aligned_u64 path;
__aligned_u64 offsets;
__aligned_u64 ref_ctr_offsets;
__u32 cnt;
__u32 flags;
} uprobe_multi;
Uprobes are defined for single binary specified in path and multiple
calling sites specified in offsets array with optional reference
counters specified in ref_ctr_offsets array. All specified arrays
have length of 'cnt'.
The 'flags' supports single bit for now that marks the uprobe as
return probe.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20230809083440.3209381-4-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add extra attach_type checks from link_create under
bpf_prog_attach_check_attach_type.
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20230809083440.3209381-3-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
After synchronous_rcu(), both the dettached XDP program and
xdp_do_flush() are completed, and the only user of bpf_cpu_map_entry
will be cpu_map_kthread_run(), so instead of calling
__cpu_map_entry_replace() to stop kthread and cleanup entry after a RCU
grace period, do these things directly.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20230816045959.358059-3-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
As for now __cpu_map_entry_replace() uses call_rcu() to wait for the
inflight xdp program to exit the RCU read critical section, and then
launch kworker cpu_map_kthread_stop() to call kthread_stop() to flush
all pending xdp frames or skbs.
But it is unnecessary to use rcu_barrier() in cpu_map_kthread_stop() to
wait for the completion of __cpu_map_entry_free(), because rcu_barrier()
will wait for all pending RCU callbacks and cpu_map_kthread_stop() only
needs to wait for the completion of a specific __cpu_map_entry_free().
So use queue_rcu_work() to replace call_rcu(), schedule_work() and
rcu_barrier(). queue_rcu_work() will queue a __cpu_map_entry_free()
kworker after a RCU grace period. Because __cpu_map_entry_free() is
running in a kworker context, so it is OK to do all of these freeing
procedures include kthread_stop() in it.
After the update, there is no need to do reference-counting for
bpf_cpu_map_entry, because bpf_cpu_map_entry is freed directly in
__cpu_map_entry_free(), so just remove it.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20230816045959.358059-2-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The commit 1b715e1b0ec5 ("bpf: Support ->fill_link_info for perf_event") leads
to the following Smatch static checker warning:
kernel/bpf/syscall.c:3416 bpf_perf_link_fill_kprobe()
error: uninitialized symbol 'type'.
That can happens when uname is NULL. So fix it by verifying the uname when we
really need to fill it.
Fixes: 1b715e1b0ec5 ("bpf: Support ->fill_link_info for perf_event")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Closes: https://lore.kernel.org/bpf/85697a7e-f897-4f74-8b43-82721bebc462@kili.mountain
Link: https://lore.kernel.org/bpf/20230813141900.1268-2-laoar.shao@gmail.com
|
|
Currently, if a struct_ops map is loaded with BPF_F_LINK, it must also
define the .validate() and .update() callbacks in its corresponding
struct bpf_struct_ops in the kernel. Enabling struct_ops link is useful
in its own right to ensure that the map is unloaded if an application
crashes. For example, with sched_ext, we want to automatically unload
the host-wide scheduler if the application crashes. We would likely
never support updating elements of a sched_ext struct_ops map, so we'd
have to implement these callbacks showing that they _can't_ support
element updates just to benefit from the basic lifetime management of
struct_ops links.
Let's enable struct_ops maps to work with BPF_F_LINK even if they
haven't defined these callbacks, by assuming that a struct_ops map
element cannot be updated by default.
Acked-by: Kui-Feng Lee <thinker.li@gmail.com>
Signed-off-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20230814185908.700553-2-void@manifault.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Commit 3a08c2fd7634 ("bpf: LRU List") declared but never implemented this.
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20230808145531.19692-1-yuehaibing@huawei.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
syzbot reports a verifier bug which triggers a runtime panic.
The test bpf program is:
0: (62) *(u32 *)(r10 -8) = 553656332
1: (bf) r1 = (s16)r10
2: (07) r1 += -8
3: (b7) r2 = 3
4: (bd) if r2 <= r1 goto pc+0
5: (85) call bpf_trace_printk#-138320
6: (b7) r0 = 0
7: (95) exit
At insn 1, the current implementation keeps 'r1' as a frame pointer,
which caused later bpf_trace_printk helper call crash since frame
pointer address is not valid any more. Note that at insn 4,
the 'pointer vs. scalar' comparison is allowed for privileged
prog run.
To fix the problem with above insn 1, the fix in the patch adopts
similar pattern to existing 'R1 = (u32) R2' handling. For unprivileged
prog run, verification will fail with 'R<num> sign-extension part of pointer'.
For privileged prog run, the dst_reg 'r1' will be marked as
an unknown scalar, so later 'bpf_trace_pointk' helper will complain
since it expected certain pointers.
Reported-by: syzbot+d61b595e9205573133b3@syzkaller.appspotmail.com
Fixes: 8100928c8814 ("bpf: Support new sign-extension mov insns")
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20230807175721.671696-1-yonghong.song@linux.dev
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
The bpf_alu_sign_string and bpf_movsx_string introduced in commit
f835bb622299 ("bpf: Add kernel/bpftool asm support for new instructions")
are only used in disasm.c now, change them to static.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202308050615.wxAn1v2J-lkp@intel.com/
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20230803023128.3753323-1-yangyingliang@huawei.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Verify if the pointer obtained from bpf_xdp_pointer() is either an error or
NULL before returning it.
The function bpf_dynptr_slice() mistakenly returned an ERR_PTR. Instead of
solely checking for NULL, it should also verify if the pointer returned by
bpf_xdp_pointer() is an error or NULL.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/bpf/d1360219-85c3-4a03-9449-253ea905f9d1@moroto.mountain/
Fixes: 66e3a13e7c2c ("bpf: Add bpf_dynptr_slice and bpf_dynptr_slice_rdwr")
Suggested-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20230803231206.1060485-1-thinker.li@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
syzbot reported an UBSAN array-index-out-of-bounds access in bpf_mprog_read()
upon bpf_mprog_detach(). While it did not have a reproducer, I was able to
manually reproduce through an empty mprog entry which just has miniq present.
The latter is important given otherwise we get an ENOENT error as tcx detaches
the whole mprog entry. The index 4294967295 was triggered via NULL dtuple.prog
which then attempts to detach from the back. bpf_mprog_fetch() in this case
did hit the idx == total and therefore tried to grab the entry at idx -1.
Fix it by adding an explicit bpf_mprog_total() check in bpf_mprog_detach() and
bail out early with ENOENT.
Fixes: 053c8e1f235d ("bpf: Add generic attach/detach/query API for multi-progs")
Reported-by: syzbot+0c06ba0f831fe07a8f27@syzkaller.appspotmail.com
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20230804131112.11012-1-daniel@iogearbox.net
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
err and tlinks is assigned first, so it does not need to initialize the
assignment.
Signed-off-by: Li kunyu <kunyu@nfschina.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230804175929.2867-1-kunyu@nfschina.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Martin KaFai Lau says:
====================
pull-request: bpf-next 2023-08-03
We've added 54 non-merge commits during the last 10 day(s) which contain
a total of 84 files changed, 4026 insertions(+), 562 deletions(-).
The main changes are:
1) Add SO_REUSEPORT support for TC bpf_sk_assign from Lorenz Bauer,
Daniel Borkmann
2) Support new insns from cpu v4 from Yonghong Song
3) Non-atomically allocate freelist during prefill from YiFei Zhu
4) Support defragmenting IPv(4|6) packets in BPF from Daniel Xu
5) Add tracepoint to xdp attaching failure from Leon Hwang
6) struct netdev_rx_queue and xdp.h reshuffling to reduce
rebuild time from Jakub Kicinski
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (54 commits)
net: invert the netdevice.h vs xdp.h dependency
net: move struct netdev_rx_queue out of netdevice.h
eth: add missing xdp.h includes in drivers
selftests/bpf: Add testcase for xdp attaching failure tracepoint
bpf, xdp: Add tracepoint to xdp attaching failure
selftests/bpf: fix static assert compilation issue for test_cls_*.c
bpf: fix bpf_probe_read_kernel prototype mismatch
riscv, bpf: Adapt bpf trampoline to optimized riscv ftrace framework
libbpf: fix typos in Makefile
tracing: bpf: use struct trace_entry in struct syscall_tp_t
bpf, devmap: Remove unused dtab field from bpf_dtab_netdev
bpf, cpumap: Remove unused cmap field from bpf_cpu_map_entry
netfilter: bpf: Only define get_proto_defrag_hook() if necessary
bpf: Fix an array-index-out-of-bounds issue in disasm.c
net: remove duplicate INDIRECT_CALLABLE_DECLARE of udp[6]_ehashfn
docs/bpf: Fix malformed documentation
bpf: selftests: Add defrag selftests
bpf: selftests: Support custom type and proto for client sockets
bpf: selftests: Support not connecting client socket
netfilter: bpf: Support BPF_F_NETFILTER_IP_DEFRAG in netfilter link
...
====================
Link: https://lore.kernel.org/r/20230803174845.825419-1-martin.lau@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
net/dsa/port.c
9945c1fb03a3 ("net: dsa: fix older DSA drivers using phylink")
a88dd7538461 ("net: dsa: remove legacy_pre_march2020 detection")
https://lore.kernel.org/all/20230731102254.2c9868ca@canb.auug.org.au/
net/xdp/xsk.c
3c5b4d69c358 ("net: annotate data-races around sk->sk_mark")
b7f72a30e9ac ("xsk: introduce wrappers and helpers for supporting multi-buffer in Tx path")
https://lore.kernel.org/all/20230731102631.39988412@canb.auug.org.au/
drivers/net/ethernet/broadcom/bnxt/bnxt.c
37b61cda9c16 ("bnxt: don't handle XDP in netpoll")
2b56b3d99241 ("eth: bnxt: handle invalid Tx completions more gracefully")
https://lore.kernel.org/all/20230801101708.1dc7faac@canb.auug.org.au/
Adjacent changes:
drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec_fs.c
62da08331f1a ("net/mlx5e: Set proper IPsec source port in L4 selector")
fbd517549c32 ("net/mlx5e: Add function to get IPsec offload namespace")
drivers/net/ethernet/sfc/selftest.c
55c1528f9b97 ("sfc: fix field-spanning memcpy in selftest")
ae9d445cd41f ("sfc: Miscellaneous comment removals")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
xdp.h is far more specific and is included in only 67 other
files vs netdevice.h's 1538 include sites.
Make xdp.h include netdevice.h, instead of the other way around.
This decreases the incremental allmodconfig builds size when
xdp.h is touched from 5947 to 662 objects.
Move bpf_prog_run_xdp() to xdp.h, seems appropriate and filter.h
is a mega-header in its own right so it's nice to avoid xdp.h
getting included there as well.
The only unfortunate part is that the typedef for xdp_features_t
has to move to netdevice.h, since its embedded in struct netdevice.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Link: https://lore.kernel.org/r/20230803010230.1755386-4-kuba@kernel.org
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
bpf_probe_read_kernel() has a __weak definition in core.c and another
definition with an incompatible prototype in kernel/trace/bpf_trace.c,
when CONFIG_BPF_EVENTS is enabled.
Since the two are incompatible, there cannot be a shared declaration in
a header file, but the lack of a prototype causes a W=1 warning:
kernel/bpf/core.c:1638:12: error: no previous prototype for 'bpf_probe_read_kernel' [-Werror=missing-prototypes]
On 32-bit architectures, the local prototype
u64 __weak bpf_probe_read_kernel(void *dst, u32 size, const void *unsafe_ptr)
passes arguments in other registers as the one in bpf_trace.c
BPF_CALL_3(bpf_probe_read_kernel, void *, dst, u32, size,
const void *, unsafe_ptr)
which uses 64-bit arguments in pairs of registers.
As both versions of the function are fairly simple and only really
differ in one line, just move them into a header file as an inline
function that does not add any overhead for the bpf_trace.c callers
and actually avoids a function call for the other one.
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/ac25cb0f-b804-1649-3afb-1dc6138c2716@iogearbox.net/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20230801111449.185301-1-arnd@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Commit 96360004b862 ("xdp: Make devmap flush_list common for all map
instances") removes the use of bpf_dtab_netdev::dtab in bq_enqueue(),
so just remove dtab from bpf_dtab_netdev.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Link: https://lore.kernel.org/r/20230728014942.892272-3-houtao@huaweicloud.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Since commit cdfafe98cabe ("xdp: Make cpumap flush_list common for all
map instances"), cmap is no longer used, so just remove it.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230728014942.892272-2-houtao@huaweicloud.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
syzbot reported an array-index-out-of-bounds when printing out bpf
insns. Further investigation shows the insn is illegal but
is printed out due to log level 1 or 2 before actual insn verification
in do_check().
This particular illegal insn is a MOVSX insn with offset value 2.
The legal offset value for MOVSX should be 8, 16 and 32.
The disasm sign-extension-size array index is calculated as
(insn->off / 8) - 1
and offset value 2 gives an out-of-bound index -1.
Tighten the checking for MOVSX insn in disasm.c to avoid
array-index-out-of-bounds issue.
Reported-by: syzbot+3758842a6c01012aa73b@syzkaller.appspotmail.com
Fixes: f835bb622299 ("bpf: Add kernel/bpftool asm support for new instructions")
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20230731204534.1975311-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The following warning was reported when running xdp_redirect_cpu with
both skb-mode and stress-mode enabled:
------------[ cut here ]------------
Incorrect XDP memory type (-2128176192) usage
WARNING: CPU: 7 PID: 1442 at net/core/xdp.c:405
Modules linked in:
CPU: 7 PID: 1442 Comm: kworker/7:0 Tainted: G 6.5.0-rc2+ #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
Workqueue: events __cpu_map_entry_free
RIP: 0010:__xdp_return+0x1e4/0x4a0
......
Call Trace:
<TASK>
? show_regs+0x65/0x70
? __warn+0xa5/0x240
? __xdp_return+0x1e4/0x4a0
......
xdp_return_frame+0x4d/0x150
__cpu_map_entry_free+0xf9/0x230
process_one_work+0x6b0/0xb80
worker_thread+0x96/0x720
kthread+0x1a5/0x1f0
ret_from_fork+0x3a/0x70
ret_from_fork_asm+0x1b/0x30
</TASK>
The reason for the warning is twofold. One is due to the kthread
cpu_map_kthread_run() is stopped prematurely. Another one is
__cpu_map_ring_cleanup() doesn't handle skb mode and treats skbs in
ptr_ring as XDP frames.
Prematurely-stopped kthread will be fixed by the preceding patch and
ptr_ring will be empty when __cpu_map_ring_cleanup() is called. But
as the comments in __cpu_map_ring_cleanup() said, handling and freeing
skbs in ptr_ring as well to "catch any broken behaviour gracefully".
Fixes: 11941f8a8536 ("bpf: cpumap: Implement generic cpumap")
Signed-off-by: Hou Tao <houtao1@huawei.com>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Link: https://lore.kernel.org/r/20230729095107.1722450-3-houtao@huaweicloud.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
The following warning was reported when running stress-mode enabled
xdp_redirect_cpu with some RT threads:
------------[ cut here ]------------
WARNING: CPU: 4 PID: 65 at kernel/bpf/cpumap.c:135
CPU: 4 PID: 65 Comm: kworker/4:1 Not tainted 6.5.0-rc2+ #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
Workqueue: events cpu_map_kthread_stop
RIP: 0010:put_cpu_map_entry+0xda/0x220
......
Call Trace:
<TASK>
? show_regs+0x65/0x70
? __warn+0xa5/0x240
......
? put_cpu_map_entry+0xda/0x220
cpu_map_kthread_stop+0x41/0x60
process_one_work+0x6b0/0xb80
worker_thread+0x96/0x720
kthread+0x1a5/0x1f0
ret_from_fork+0x3a/0x70
ret_from_fork_asm+0x1b/0x30
</TASK>
The root cause is the same as commit 436901649731 ("bpf: cpumap: Fix memory
leak in cpu_map_update_elem"). The kthread is stopped prematurely by
kthread_stop() in cpu_map_kthread_stop(), and kthread() doesn't call
cpu_map_kthread_run() at all but XDP program has already queued some
frames or skbs into ptr_ring. So when __cpu_map_ring_cleanup() checks
the ptr_ring, it will find it was not emptied and report a warning.
An alternative fix is to use __cpu_map_ring_cleanup() to drop these
pending frames or skbs when kthread_stop() returns -EINTR, but it may
confuse the user, because these frames or skbs have been handled
correctly by XDP program. So instead of dropping these frames or skbs,
just make sure the per-cpu kthread is running before
__cpu_map_entry_alloc() returns.
After apply the fix, the error handle for kthread_stop() will be
unnecessary because it will always return 0, so just remove it.
Fixes: 6710e1126934 ("bpf: introduce new bpf cpu map type BPF_MAP_TYPE_CPUMAP")
Signed-off-by: Hou Tao <houtao1@huawei.com>
Reviewed-by: Pu Lehui <pulehui@huawei.com>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Link: https://lore.kernel.org/r/20230729095107.1722450-2-houtao@huaweicloud.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
During unregister_netdevice_many_notify(), the ordering of our concerned
function calls is like this:
unregister_netdevice_many_notify
dev_shutdown
qdisc_put
clsact_destroy
tcx_uninstall
The syzbot reproducer triggered a case that the qdisc refcnt is not
zero during dev_shutdown().
tcx_uninstall() will then WARN_ON_ONCE(tcx_entry(entry)->miniq_active)
because the miniq is still active and the entry should not be freed.
The latter assumed that qdisc destruction happens before tcx teardown.
This fix is to avoid tcx_uninstall() doing tcx_entry_free() when the
miniq is still alive and let the clsact_destroy() do the free later, so
that we do not assume any specific ordering for either of them.
If still active, tcx_uninstall() does clear the entry when flushing out
the prog/link. clsact_destroy() will then notice the "!tcx_entry_is_active()"
and then does the tcx_entry_free() eventually.
Fixes: e420bed02507 ("bpf: Add fd-based tcx multi-prog infra with link support")
Reported-by: syzbot+376a289e86a0fd02b9ba@syzkaller.appspotmail.com
Reported-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Co-developed-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: syzbot+376a289e86a0fd02b9ba@syzkaller.appspotmail.com
Tested-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/222255fe07cb58f15ee662e7ee78328af5b438e4.1690549248.git.daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In internal testing of test_maps, we sometimes observed failures like:
test_maps: test_maps.c:173: void test_hashmap_percpu(unsigned int, void *):
Assertion `bpf_map_update_elem(fd, &key, value, BPF_ANY) == 0' failed.
where the errno is ENOMEM. After some troubleshooting and enabling
the warnings, we saw:
[ 91.304708] percpu: allocation failed, size=8 align=8 atomic=1, atomic alloc failed, no space left
[ 91.304716] CPU: 51 PID: 24145 Comm: test_maps Kdump: loaded Tainted: G N 6.1.38-smp-DEV #7
[ 91.304719] Hardware name: Google Astoria/astoria, BIOS 0.20230627.0-0 06/27/2023
[ 91.304721] Call Trace:
[ 91.304724] <TASK>
[ 91.304730] [<ffffffffa7ef83b9>] dump_stack_lvl+0x59/0x88
[ 91.304737] [<ffffffffa7ef83f8>] dump_stack+0x10/0x18
[ 91.304738] [<ffffffffa75caa0c>] pcpu_alloc+0x6fc/0x870
[ 91.304741] [<ffffffffa75ca302>] __alloc_percpu_gfp+0x12/0x20
[ 91.304743] [<ffffffffa756785e>] alloc_bulk+0xde/0x1e0
[ 91.304746] [<ffffffffa7566c02>] bpf_mem_alloc_init+0xd2/0x2f0
[ 91.304747] [<ffffffffa7547c69>] htab_map_alloc+0x479/0x650
[ 91.304750] [<ffffffffa751d6e0>] map_create+0x140/0x2e0
[ 91.304752] [<ffffffffa751d413>] __sys_bpf+0x5a3/0x6c0
[ 91.304753] [<ffffffffa751c3ec>] __x64_sys_bpf+0x1c/0x30
[ 91.304754] [<ffffffffa7ef847a>] do_syscall_64+0x5a/0x80
[ 91.304756] [<ffffffffa800009b>] entry_SYSCALL_64_after_hwframe+0x63/0xcd
This makes sense, because in atomic context, percpu allocation would
not create new chunks; it would only create in non-atomic contexts.
And if during prefill all precpu chunks are full, -ENOMEM would
happen immediately upon next unit_alloc.
Prefill phase does not actually run in atomic context, so we can
use this fact to allocate non-atomically with GFP_KERNEL instead
of GFP_NOWAIT. This avoids the immediate -ENOMEM.
GFP_NOWAIT has to be used in unit_alloc when bpf program runs
in atomic context. Even if bpf program runs in non-atomic context,
in most cases, rcu read lock is enabled for the program so
GFP_NOWAIT is still needed. This is often also the case for
BPF_MAP_UPDATE_ELEM syscalls.
Signed-off-by: YiFei Zhu <zhuyifei@google.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Acked-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20230728043359.3324347-1-zhuyifei@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The kernel test robot reported compilation warnings when -Wparentheses is
added to KBUILD_CFLAGS with gcc compiler. The following is the error message:
.../bpf-next/kernel/bpf/verifier.c: In function ‘coerce_reg_to_size_sx’:
.../bpf-next/kernel/bpf/verifier.c:5901:14:
error: suggest parentheses around comparison in operand of ‘==’ [-Werror=parentheses]
if (s64_max >= 0 == s64_min >= 0) {
~~~~~~~~^~~~
.../bpf-next/kernel/bpf/verifier.c: In function ‘coerce_subreg_to_size_sx’:
.../bpf-next/kernel/bpf/verifier.c:5965:14:
error: suggest parentheses around comparison in operand of ‘==’ [-Werror=parentheses]
if (s32_min >= 0 == s32_max >= 0) {
~~~~~~~~^~~~
To fix the issue, add proper parentheses for the above '>=' condition
to silence the warning/error.
I tried a few clang compilers like clang16 and clang18 and they do not emit
such warnings with -Wparentheses.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202307281133.wi0c4SqG-lkp@intel.com/
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230728055740.2284534-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add asm support for new instructions so kernel verifier and bpftool
xlated insn dumps can have proper asm syntax for new instructions.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add interpreter/jit/verifier support for 32bit offset jmp instruction.
If a conditional jmp instruction needs more than 16bit offset,
it can be simulated with a conditional jmp + a 32bit jmp insn.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20230728011231.3716103-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Handle new insns properly in bpf_jit_blind_insn() function.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20230728011225.3715812-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
Linus Torvalds
Palmer Dabbelt
Puranjay Mohan
Martin KaFai Lau
Sebastian Andrzej Siewior
Dave Marchevsky
Yonghong Song
Yafang Shao
Masami Hiramatsu (Google)
Kumar Kartikeya Dwivedi
Jiri Olsa
Hou Tao
David Vernet
Yue Haibing
Yang Yingliang
Kui-Feng Lee
Daniel Borkmann
Li kunyu
Jakub Kicinski
Arnd Bergmann
YiFei Zhu
