| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk updates from Petr Mladek:
"Improve the behavior during panic. The issues were found when testing
the ongoing changes introducing atomic consoles and printk kthreads:
- pr_flush() has to wait for the last reserved record instead of the
last finalized one. Note that records are finalized in random order
when generated by more CPUs in parallel.
- Ignore non-finalized records during panic(). Messages printed on
panic-CPU are always finalized. Messages printed by other CPUs
might never be finalized when the CPUs get stopped.
- Block new printk() calls on non-panic CPUs completely. Backtraces
are printed before entering the panic mode. Later messages would
just mess information printed by the panic CPU.
- Do not take console_lock in console_flush_on_panic() at all. The
original code did try_lock()/console_unlock(). The unlock part
might cause a deadlock when panic() happened in a scheduler code.
- Fix conversion of 64-bit sequence number for 32-bit atomic
operations"
* tag 'printk-for-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
dump_stack: Do not get cpu_sync for panic CPU
panic: Flush kernel log buffer at the end
printk: Avoid non-panic CPUs writing to ringbuffer
printk: Disable passing console lock owner completely during panic()
printk: ringbuffer: Skip non-finalized records in panic
printk: Wait for all reserved records with pr_flush()
printk: ringbuffer: Cleanup reader terminology
printk: Add this_cpu_in_panic()
printk: For @suppress_panic_printk check for other CPU in panic
printk: ringbuffer: Clarify special lpos values
printk: ringbuffer: Do not skip non-finalized records with prb_next_seq()
printk: Use prb_first_seq() as base for 32bit seq macros
printk: Adjust mapping for 32bit seq macros
printk: nbcon: Relocate 32bit seq macros
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Large effort by Eric to lower rtnl_lock pressure and remove locks:
- Make commonly used parts of rtnetlink (address, route dumps
etc) lockless, protected by RCU instead of rtnl_lock.
- Add a netns exit callback which already holds rtnl_lock,
allowing netns exit to take rtnl_lock once in the core instead
of once for each driver / callback.
- Remove locks / serialization in the socket diag interface.
- Remove 6 calls to synchronize_rcu() while holding rtnl_lock.
- Remove the dev_base_lock, depend on RCU where necessary.
- Support busy polling on a per-epoll context basis. Poll length and
budget parameters can be set independently of system defaults.
- Introduce struct net_hotdata, to make sure read-mostly global
config variables fit in as few cache lines as possible.
- Add optional per-nexthop statistics to ease monitoring / debug of
ECMP imbalance problems.
- Support TCP_NOTSENT_LOWAT in MPTCP.
- Ensure that IPv6 temporary addresses' preferred lifetimes are long
enough, compared to other configured lifetimes, and at least 2 sec.
- Support forwarding of ICMP Error messages in IPSec, per RFC 4301.
- Add support for the independent control state machine for bonding
per IEEE 802.1AX-2008 5.4.15 in addition to the existing coupled
control state machine.
- Add "network ID" to MCTP socket APIs to support hosts with multiple
disjoint MCTP networks.
- Re-use the mono_delivery_time skbuff bit for packets which user
space wants to be sent at a specified time. Maintain the timing
information while traversing veth links, bridge etc.
- Take advantage of MSG_SPLICE_PAGES for RxRPC DATA and ACK packets.
- Simplify many places iterating over netdevs by using an xarray
instead of a hash table walk (hash table remains in place, for use
on fastpaths).
- Speed up scanning for expired routes by keeping a dedicated list.
- Speed up "generic" XDP by trying harder to avoid large allocations.
- Support attaching arbitrary metadata to netconsole messages.
Things we sprinkled into general kernel code:
- Enforce VM_IOREMAP flag and range in ioremap_page_range and
introduce VM_SPARSE kind and vm_area_[un]map_pages (used by
bpf_arena).
- Rework selftest harness to enable the use of the full range of ksft
exit code (pass, fail, skip, xfail, xpass).
Netfilter:
- Allow userspace to define a table that is exclusively owned by a
daemon (via netlink socket aliveness) without auto-removing this
table when the userspace program exits. Such table gets marked as
orphaned and a restarting management daemon can re-attach/regain
ownership.
- Speed up element insertions to nftables' concatenated-ranges set
type. Compact a few related data structures.
BPF:
- Add BPF token support for delegating a subset of BPF subsystem
functionality from privileged system-wide daemons such as systemd
through special mount options for userns-bound BPF fs to a trusted
& unprivileged application.
- Introduce bpf_arena which is sparse shared memory region between
BPF program and user space where structures inside the arena can
have pointers to other areas of the arena, and pointers work
seamlessly for both user-space programs and BPF programs.
- Introduce may_goto instruction that is a contract between the
verifier and the program. The verifier allows the program to loop
assuming it's behaving well, but reserves the right to terminate
it.
- Extend the BPF verifier to enable static subprog calls in spin lock
critical sections.
- Support registration of struct_ops types from modules which helps
projects like fuse-bpf that seeks to implement a new struct_ops
type.
- Add support for retrieval of cookies for perf/kprobe multi links.
- Support arbitrary TCP SYN cookie generation / validation in the TC
layer with BPF to allow creating SYN flood handling in BPF
firewalls.
- Add code generation to inline the bpf_kptr_xchg() helper which
improves performance when stashing/popping the allocated BPF
objects.
Wireless:
- Add SPP (signaling and payload protected) AMSDU support.
- Support wider bandwidth OFDMA, as required for EHT operation.
Driver API:
- Major overhaul of the Energy Efficient Ethernet internals to
support new link modes (2.5GE, 5GE), share more code between
drivers (especially those using phylib), and encourage more
uniform behavior. Convert and clean up drivers.
- Define an API for querying per netdev queue statistics from
drivers.
- IPSec: account in global stats for fully offloaded sessions.
- Create a concept of Ethernet PHY Packages at the Device Tree level,
to allow parameterizing the existing PHY package code.
- Enable Rx hashing (RSS) on GTP protocol fields.
Misc:
- Improvements and refactoring all over networking selftests.
- Create uniform module aliases for TC classifiers, actions, and
packet schedulers to simplify creating modprobe policies.
- Address all missing MODULE_DESCRIPTION() warnings in networking.
- Extend the Netlink descriptions in YAML to cover message
encapsulation or "Netlink polymorphism", where interpretation of
nested attributes depends on link type, classifier type or some
other "class type".
Drivers:
- Ethernet high-speed NICs:
- Add a new driver for Marvell's Octeon PCI Endpoint NIC VF.
- Intel (100G, ice, idpf):
- support E825-C devices
- nVidia/Mellanox:
- support devices with one port and multiple PCIe links
- Broadcom (bnxt):
- support n-tuple filters
- support configuring the RSS key
- Wangxun (ngbe/txgbe):
- implement irq_domain for TXGBE's sub-interrupts
- Pensando/AMD:
- support XDP
- optimize queue submission and wakeup handling (+17% bps)
- optimize struct layout, saving 28% of memory on queues
- Ethernet NICs embedded and virtual:
- Google cloud vNIC:
- refactor driver to perform memory allocations for new queue
config before stopping and freeing the old queue memory
- Synopsys (stmmac):
- obey queueMaxSDU and implement counters required by 802.1Qbv
- Renesas (ravb):
- support packet checksum offload
- suspend to RAM and runtime PM support
- Ethernet switches:
- nVidia/Mellanox:
- support for nexthop group statistics
- Microchip:
- ksz8: implement PHY loopback
- add support for KSZ8567, a 7-port 10/100Mbps switch
- PTP:
- New driver for RENESAS FemtoClock3 Wireless clock generator.
- Support OCP PTP cards designed and built by Adva.
- CAN:
- Support recvmsg() flags for own, local and remote traffic on CAN
BCM sockets.
- Support for esd GmbH PCIe/402 CAN device family.
- m_can:
- Rx/Tx submission coalescing
- wake on frame Rx
- WiFi:
- Intel (iwlwifi):
- enable signaling and payload protected A-MSDUs
- support wider-bandwidth OFDMA
- support for new devices
- bump FW API to 89 for AX devices; 90 for BZ/SC devices
- MediaTek (mt76):
- mt7915: newer ADIE version support
- mt7925: radio temperature sensor support
- Qualcomm (ath11k):
- support 6 GHz station power modes: Low Power Indoor (LPI),
Standard Power) SP and Very Low Power (VLP)
- QCA6390 & WCN6855: support 2 concurrent station interfaces
- QCA2066 support
- Qualcomm (ath12k):
- refactoring in preparation for Multi-Link Operation (MLO)
support
- 1024 Block Ack window size support
- firmware-2.bin support
- support having multiple identical PCI devices (firmware needs
to have ATH12K_FW_FEATURE_MULTI_QRTR_ID)
- QCN9274: support split-PHY devices
- WCN7850: enable Power Save Mode in station mode
- WCN7850: P2P support
- RealTek:
- rtw88: support for more rtw8811cu and rtw8821cu devices
- rtw89: support SCAN_RANDOM_SN and SET_SCAN_DWELL
- rtlwifi: speed up USB firmware initialization
- rtwl8xxxu:
- RTL8188F: concurrent interface support
- Channel Switch Announcement (CSA) support in AP mode
- Broadcom (brcmfmac):
- per-vendor feature support
- per-vendor SAE password setup
- DMI nvram filename quirk for ACEPC W5 Pro"
* tag 'net-next-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2255 commits)
nexthop: Fix splat with CONFIG_DEBUG_PREEMPT=y
nexthop: Fix out-of-bounds access during attribute validation
nexthop: Only parse NHA_OP_FLAGS for dump messages that require it
nexthop: Only parse NHA_OP_FLAGS for get messages that require it
bpf: move sleepable flag from bpf_prog_aux to bpf_prog
bpf: hardcode BPF_PROG_PACK_SIZE to 2MB * num_possible_nodes()
selftests/bpf: Add kprobe multi triggering benchmarks
ptp: Move from simple ida to xarray
vxlan: Remove generic .ndo_get_stats64
vxlan: Do not alloc tstats manually
devlink: Add comments to use netlink gen tool
nfp: flower: handle acti_netdevs allocation failure
net/packet: Add getsockopt support for PACKET_COPY_THRESH
net/netlink: Add getsockopt support for NETLINK_LISTEN_ALL_NSID
selftests/bpf: Add bpf_arena_htab test.
selftests/bpf: Add bpf_arena_list test.
selftests/bpf: Add unit tests for bpf_arena_alloc/free_pages
bpf: Add helper macro bpf_addr_space_cast()
libbpf: Recognize __arena global variables.
bpftool: Recognize arena map type
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening updates from Kees Cook:
"As is pretty normal for this tree, there are changes all over the
place, especially for small fixes, selftest improvements, and improved
macro usability.
Some header changes ended up landing via this tree as they depended on
the string header cleanups. Also, a notable set of changes is the work
for the reintroduction of the UBSAN signed integer overflow sanitizer
so that we can continue to make improvements on the compiler side to
make this sanitizer a more viable future security hardening option.
Summary:
- string.h and related header cleanups (Tanzir Hasan, Andy
Shevchenko)
- VMCI memcpy() usage and struct_size() cleanups (Vasiliy Kovalev,
Harshit Mogalapalli)
- selftests/powerpc: Fix load_unaligned_zeropad build failure
(Michael Ellerman)
- hardened Kconfig fragment updates (Marco Elver, Lukas Bulwahn)
- Handle tail call optimization better in LKDTM (Douglas Anderson)
- Use long form types in overflow.h (Andy Shevchenko)
- Add flags param to string_get_size() (Andy Shevchenko)
- Add Coccinelle script for potential struct_size() use (Jacob
Keller)
- Fix objtool corner case under KCFI (Josh Poimboeuf)
- Drop 13 year old backward compat CAP_SYS_ADMIN check (Jingzi Meng)
- Add str_plural() helper (Michal Wajdeczko, Kees Cook)
- Ignore relocations in .notes section
- Add comments to explain how __is_constexpr() works
- Fix m68k stack alignment expectations in stackinit Kunit test
- Convert string selftests to KUnit
- Add KUnit tests for fortified string functions
- Improve reporting during fortified string warnings
- Allow non-type arg to type_max() and type_min()
- Allow strscpy() to be called with only 2 arguments
- Add binary mode to leaking_addresses scanner
- Various small cleanups to leaking_addresses scanner
- Adding wrapping_*() arithmetic helper
- Annotate initial signed integer wrap-around in refcount_t
- Add explicit UBSAN section to MAINTAINERS
- Fix UBSAN self-test warnings
- Simplify UBSAN build via removal of CONFIG_UBSAN_SANITIZE_ALL
- Reintroduce UBSAN's signed overflow sanitizer"
* tag 'hardening-v6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (51 commits)
selftests/powerpc: Fix load_unaligned_zeropad build failure
string: Convert helpers selftest to KUnit
string: Convert selftest to KUnit
sh: Fix build with CONFIG_UBSAN=y
compiler.h: Explain how __is_constexpr() works
overflow: Allow non-type arg to type_max() and type_min()
VMCI: Fix possible memcpy() run-time warning in vmci_datagram_invoke_guest_handler()
lib/string_helpers: Add flags param to string_get_size()
x86, relocs: Ignore relocations in .notes section
objtool: Fix UNWIND_HINT_{SAVE,RESTORE} across basic blocks
overflow: Use POD in check_shl_overflow()
lib: stackinit: Adjust target string to 8 bytes for m68k
sparc: vdso: Disable UBSAN instrumentation
kernel.h: Move lib/cmdline.c prototypes to string.h
leaking_addresses: Provide mechanism to scan binary files
leaking_addresses: Ignore input device status lines
leaking_addresses: Use File::Temp for /tmp files
MAINTAINERS: Update LEAKING_ADDRESSES details
fortify: Improve buffer overflow reporting
fortify: Add KUnit tests for runtime overflows
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Heiko Carstens:
- Various virtual vs physical address usage fixes
- Fix error handling in Processor Activity Instrumentation device
driver, and export number of counters with a sysfs file
- Allow for multiple events when Processor Activity Instrumentation
counters are monitored in system wide sampling
- Change multiplier and shift values of the Time-of-Day clock source to
improve steering precision
- Remove a couple of unneeded GFP_DMA flags from allocations
- Disable mmap alignment if randomize_va_space is also disabled, to
avoid a too small heap
- Various changes to allow s390 to be compiled with LLVM=1, since
ld.lld and llvm-objcopy will have proper s390 support witch clang 19
- Add __uninitialized macro to Compiler Attributes. This is helpful
with s390's FPU code where some users have up to 520 byte stack
frames. Clearing such stack frames (if INIT_STACK_ALL_PATTERN or
INIT_STACK_ALL_ZERO is enabled) before they are used contradicts the
intention (performance improvement) of such code sections.
- Convert switch_to() to an out-of-line function, and use the generic
switch_to header file
- Replace the usage of s390's debug feature with pr_debug() calls
within the zcrypt device driver
- Improve hotplug support of the Adjunct Processor device driver
- Improve retry handling in the zcrypt device driver
- Various changes to the in-kernel FPU code:
- Make in-kernel FPU sections preemptible
- Convert various larger inline assemblies and assembler files to
C, mainly by using singe instruction inline assemblies. This
increases readability, but also allows makes it easier to add
proper instrumentation hooks
- Cleanup of the header files
- Provide fast variants of csum_partial() and
csum_partial_copy_nocheck() based on vector instructions
- Introduce and use a lock to synchronize accesses to zpci device data
structures to avoid inconsistent states caused by concurrent accesses
- Compile the kernel without -fPIE. This addresses the following
problems if the kernel is compiled with -fPIE:
- It uses dynamic symbols (.dynsym), for which the linker refuses
to allow more than 64k sections. This can break features which
use '-ffunction-sections' and '-fdata-sections', including
kpatch-build and function granular KASLR
- It unnecessarily uses GOT relocations, adding an extra layer of
indirection for many memory accesses
- Fix shared_cpu_list for CPU private L2 caches, which incorrectly were
reported as globally shared
* tag 's390-6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (117 commits)
s390/tools: handle rela R_390_GOTPCDBL/R_390_GOTOFF64
s390/cache: prevent rebuild of shared_cpu_list
s390/crypto: remove retry loop with sleep from PAES pkey invocation
s390/pkey: improve pkey retry behavior
s390/zcrypt: improve zcrypt retry behavior
s390/zcrypt: introduce retries on in-kernel send CPRB functions
s390/ap: introduce mutex to lock the AP bus scan
s390/ap: rework ap_scan_bus() to return true on config change
s390/ap: clarify AP scan bus related functions and variables
s390/ap: rearm APQNs bindings complete completion
s390/configs: increase number of LOCKDEP_BITS
s390/vfio-ap: handle hardware checkstop state on queue reset operation
s390/pai: change sampling event assignment for PMU device driver
s390/boot: fix minor comment style damages
s390/boot: do not check for zero-termination relocation entry
s390/boot: make type of __vmlinux_relocs_64_start|end consistent
s390/boot: sanitize kaslr_adjust_relocs() function prototype
s390/boot: simplify GOT handling
s390: vmlinux.lds.S: fix .got.plt assertion
s390/boot: workaround current 'llvm-objdump -t -j ...' behavior
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
- Micro-optimize local_xchg() and the rtmutex code on x86
- Fix percpu-rwsem contention tracepoints
- Simplify debugging Kconfig dependencies
- Update/clarify the documentation of atomic primitives
- Misc cleanups
* tag 'locking-core-2024-03-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/rtmutex: Use try_cmpxchg_relaxed() in mark_rt_mutex_waiters()
locking/x86: Implement local_xchg() using CMPXCHG without the LOCK prefix
locking/percpu-rwsem: Trigger contention tracepoints only if contended
locking/rwsem: Make DEBUG_RWSEMS and PREEMPT_RT mutually exclusive
locking/rwsem: Clarify that RWSEM_READER_OWNED is just a hint
locking/mutex: Simplify <linux/mutex.h>
locking/qspinlock: Fix 'wait_early' set but not used warning
locking/atomic: scripts: Clarify ordering of conditional atomics
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull misc vfs updates from Christian Brauner:
"Misc features, cleanups, and fixes for vfs and individual filesystems.
Features:
- Support idmapped mounts for hugetlbfs.
- Add RWF_NOAPPEND flag for pwritev2(). This allows us to fix a bug
where the passed offset is ignored if the file is O_APPEND. The new
flag allows a caller to enforce that the offset is honored to
conform to posix even if the file was opened in append mode.
- Move i_mmap_rwsem in struct address_space to avoid false sharing
between i_mmap and i_mmap_rwsem.
- Convert efs, qnx4, and coda to use the new mount api.
- Add a generic is_dot_dotdot() helper that's used by various
filesystems and the VFS code instead of open-coding it multiple
times.
- Recently we've added stable offsets which allows stable ordering
when iterating directories exported through NFS on e.g., tmpfs
filesystems. Originally an xarray was used for the offset map but
that caused slab fragmentation issues over time. This switches the
offset map to the maple tree which has a dense mode that handles
this scenario a lot better. Includes tests.
- Finally merge the case-insensitive improvement series Gabriel has
been working on for a long time. This cleanly propagates case
insensitive operations through ->s_d_op which in turn allows us to
remove the quite ugly generic_set_encrypted_ci_d_ops() operations.
It also improves performance by trying a case-sensitive comparison
first and then fallback to case-insensitive lookup if that fails.
This also fixes a bug where overlayfs would be able to be mounted
over a case insensitive directory which would lead to all sort of
odd behaviors.
Cleanups:
- Make file_dentry() a simple accessor now that ->d_real() is
simplified because of the backing file work we did the last two
cycles.
- Use the dedicated file_mnt_idmap helper in ntfs3.
- Use smp_load_acquire/store_release() in the i_size_read/write
helpers and thus remove the hack to handle i_size reads in the
filemap code.
- The SLAB_MEM_SPREAD is a nop now. Remove it from various places in
fs/
- It's no longer necessary to perform a second built-in initramfs
unpack call because we retain the contents of the previous
extraction. Remove it.
- Now that we have removed various allocators kfree_rcu() always
works with kmem caches and kmalloc(). So simplify various places
that only use an rcu callback in order to handle the kmem cache
case.
- Convert the pipe code to use a lockdep comparison function instead
of open-coding the nesting making lockdep validation easier.
- Move code into fs-writeback.c that was located in a header but can
be made static as it's only used in that one file.
- Rewrite the alignment checking iterators for iovec and bvec to be
easier to read, and also significantly more compact in terms of
generated code. This saves 270 bytes of text on x86-64 (with
clang-18) and 224 bytes on arm64 (with gcc-13). In profiles it also
saves a bit of time for the same workload.
- Switch various places to use KMEM_CACHE instead of
kmem_cache_create().
- Use inode_set_ctime_to_ts() in inode_set_ctime_current()
- Use kzalloc() in name_to_handle_at() to avoid kernel infoleak.
- Various smaller cleanups for eventfds.
Fixes:
- Fix various comments and typos, and unneeded initializations.
- Fix stack allocation hack for clang in the select code.
- Improve dump_mapping() debug code on a best-effort basis.
- Fix build errors in various selftests.
- Avoid wrap-around instrumentation in various places.
- Don't allow user namespaces without an idmapping to be used for
idmapped mounts.
- Fix sysv sb_read() call.
- Fix fallback implementation of the get_name() export operation"
* tag 'vfs-6.9.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (70 commits)
hugetlbfs: support idmapped mounts
qnx4: convert qnx4 to use the new mount api
fs: use inode_set_ctime_to_ts to set inode ctime to current time
libfs: Drop generic_set_encrypted_ci_d_ops
ubifs: Configure dentry operations at dentry-creation time
f2fs: Configure dentry operations at dentry-creation time
ext4: Configure dentry operations at dentry-creation time
libfs: Add helper to choose dentry operations at mount-time
libfs: Merge encrypted_ci_dentry_ops and ci_dentry_ops
fscrypt: Drop d_revalidate once the key is added
fscrypt: Drop d_revalidate for valid dentries during lookup
fscrypt: Factor out a helper to configure the lookup dentry
ovl: Always reject mounting over case-insensitive directories
libfs: Attempt exact-match comparison first during casefolded lookup
efs: remove SLAB_MEM_SPREAD flag usage
jfs: remove SLAB_MEM_SPREAD flag usage
minix: remove SLAB_MEM_SPREAD flag usage
openpromfs: remove SLAB_MEM_SPREAD flag usage
proc: remove SLAB_MEM_SPREAD flag usage
qnx6: remove SLAB_MEM_SPREAD flag usage
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull KUnit updates from Shuah Khan:
- fix to make kunit_bus_type const
- kunit tool change to Print UML command
- DRM device creation helpers are now using the new kunit device
creation helpers. This change resulted in DRM helpers switching from
using a platform_device, to a dedicated bus and device type used by
kunit. kunit devices don't set DMA mask and this caused regression on
some drm tests as they can't allocate DMA buffers. Fix this problem
by setting DMA masks on the kunit device during initialization.
- KUnit has several macros which accept a log message, which can
contain printf format specifiers. Some of these (the explicit log
macros) already use the __printf() gcc attribute to ensure the format
specifiers are valid, but those which could fail the test, and hence
used __kunit_do_failed_assertion() behind the scenes, did not.
These include: KUNIT_EXPECT_*_MSG(), KUNIT_ASSERT_*_MSG(), and
KUNIT_FAIL()
A nine-patch series adds the __printf() attribute, and fixes all of
the issues uncovered.
* tag 'linux_kselftest-kunit-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: Annotate _MSG assertion variants with gnu printf specifiers
drm: tests: Fix invalid printf format specifiers in KUnit tests
drm/xe/tests: Fix printf format specifiers in xe_migrate test
net: test: Fix printf format specifier in skb_segment kunit test
rtc: test: Fix invalid format specifier.
time: test: Fix incorrect format specifier
lib: memcpy_kunit: Fix an invalid format specifier in an assertion msg
lib/cmdline: Fix an invalid format specifier in an assertion msg
kunit: test: Log the correct filter string in executor_test
kunit: Setup DMA masks on the kunit device
kunit: make kunit_bus_type const
kunit: Mark filter* params as rw
kunit: tool: Print UML command
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest update from Shuah Khan:
- livepatch restructuring to move the module out of lib to be built as
a out-of-tree modules during kselftest build. This makes it easier
change, debug and rebuild the tests by running make on the
selftests/livepatch directory, which is not currently possible since
the modules on lib/livepatch are build and installed using the main
makefile modules target.
- livepatch restructuring fixes for problems found by kernel test
robot. The change skips the test if kernel-devel isn't installed
(default value of KDIR), or if KDIR variable passed doesn't exists.
- resctrl test restructuring and new non-contiguous CBMs CAT test
- new ktap_helpers to print diagnostic messages, pass/fail tests based
on exit code, abort test, and finish the test.
- a new test verify power supply properties.
- a new ftrace to exercise function tracer across cpu hotplug.
- timeout increase for mqueue test to allow the test to run on i3.metal
AWS instances.
- minor spelling corrections in several tests.
- missing gitignore files and changes to existing gitignore files.
* tag 'linux_kselftest-next-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (57 commits)
kselftest: Add basic test for probing the rust sample modules
selftests: lib.mk: Do not process TEST_GEN_MODS_DIR
selftests: livepatch: Avoid running the tests if kernel-devel is missing
selftests: livepatch: Add initial .gitignore
selftests/resctrl: Add non-contiguous CBMs CAT test
selftests/resctrl: Add resource_info_file_exists()
selftests/resctrl: Split validate_resctrl_feature_request()
selftests/resctrl: Add a helper for the non-contiguous test
selftests/resctrl: Add test groups and name L3 CAT test L3_CAT
selftests: sched: Fix spelling mistake "hiearchy" -> "hierarchy"
selftests/mqueue: Set timeout to 180 seconds
selftests/ftrace: Add test to exercize function tracer across cpu hotplug
selftest: ftrace: fix minor typo in log
selftests: thermal: intel: workload_hint: add missing gitignore
selftests: thermal: intel: power_floor: add missing gitignore
selftests: uevent: add missing gitignore
selftests: Add test to verify power supply properties
selftests: ktap_helpers: Add a helper to finish the test
selftests: ktap_helpers: Add a helper to abort the test
selftests: ktap_helpers: Add helper to pass/fail test based on exit code
...
|
|
These helpers scatters or gathers a bitmap with the help of the mask
position bits parameter.
bitmap_scatter() does the following:
src: 0000000001011010
||||||
+------+|||||
| +----+||||
| |+----+|||
| || +-+||
| || | ||
mask: ...v..vv...v..vv
...0..11...0..10
dst: 0000001100000010
and bitmap_gather() performs this one:
mask: ...v..vv...v..vv
src: 0000001100000010
^ ^^ ^ 0
| || | 10
| || > 010
| |+--> 1010
| +--> 11010
+----> 011010
dst: 0000000000011010
bitmap_gather() can the seen as the reverse bitmap_scatter() operation.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/lkml/20230926052007.3917389-3-andriy.shevchenko@linux.intel.com/
Co-developed-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Acked-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
softnet_data->time_squeeze is sometimes used as a proxy for
host overload or indication of scheduling problems. In practice
this statistic is very noisy and has hard to grasp units -
e.g. is 10 squeezes a second to be expected, or high?
Delaying network (NAPI) processing leads to drops on NIC queues
but also RTT bloat, impacting pacing and CA decisions.
Stalls are a little hard to detect on the Rx side, because
there may simply have not been any packets received in given
period of time. Packet timestamps help a little bit, but
again we don't know if packets are stale because we're
not keeping up or because someone (*cough* cgroups)
disabled IRQs for a long time.
We can, however, use Tx as a proxy for Rx stalls. Most drivers
use combined Rx+Tx NAPIs so if Tx gets starved so will Rx.
On the Tx side we know exactly when packets get queued,
and completed, so there is no uncertainty.
This patch adds stall checks to BQL. Why BQL? Because
it's a convenient place to add such checks, already
called by most drivers, and it has copious free space
in its structures (this patch adds no extra cache
references or dirtying to the fast path).
The algorithm takes one parameter - max delay AKA stall
threshold and increments a counter whenever NAPI got delayed
for at least that amount of time. It also records the length
of the longest stall.
To be precise every time NAPI has not polled for at least
stall thrs we check if there were any Tx packets queued
between last NAPI run and now - stall_thrs/2.
Unlike the classic Tx watchdog this mechanism does not
ignore stalls caused by Tx being disabled, or loss of link.
I don't think the check is worth the complexity, and
stall is a stall, whether due to host overload, flow
control, link down... doesn't matter much to the application.
We have been running this detector in production at Meta
for 2 years, with the threshold of 8ms. It's the lowest
value where false positives become rare. There's still
a constant stream of reported stalls (especially without
the ksoftirqd deferral patches reverted), those who like
their stall metrics to be 0 may prefer higher value.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Cross-merge networking fixes after downstream PR.
No conflicts.
Adjacent changes:
net/core/page_pool_user.c
0b11b1c5c320 ("netdev: let netlink core handle -EMSGSIZE errors")
429679dcf7d9 ("page_pool: fix netlink dump stop/resume")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This flag is only set by one single user: the magical core dumping code
that looks up user pages one by one, and then writes them out using
their kernel addresses (by using a BVEC_ITER).
That actually ends up being a huge problem, because while we do use
copy_mc_to_kernel() for this case and it is able to handle the possible
machine checks involved, nothing else is really ready to handle the
failures caused by the machine check.
In particular, as reported by Tong Tiangen, we don't actually support
fault_in_iov_iter_readable() on a machine check area.
As a result, the usual logic for writing things to a file under a
filesystem lock, which involves doing a copy with page faults disabled
and then if that fails trying to fault pages in without holding the
locks with fault_in_iov_iter_readable() does not work at all.
We could decide to always just make the MC copy "succeed" (and filling
the destination with zeroes), and that would then create a core dump
file that just ignores any machine checks.
But honestly, this single special case has been problematic before, and
means that all the normal iov_iter code ends up slightly more complex
and slower.
See for example commit c9eec08bac96 ("iov_iter: Don't deal with
iter->copy_mc in memcpy_from_iter_mc()") where David Howells
re-organized the code just to avoid having to check the 'copy_mc' flags
inside the inner iov_iter loops.
So considering that we have exactly one user, and that one user is a
non-critical special case that doesn't actually ever trigger in real
life (Tong found this with manual error injection), the sane solution is
to just decide that the onus on handling the machine check lines on that
user instead.
Ergo, do the copy_mc_to_kernel() in the core dump logic itself, copying
the user data to a stable kernel page before writing it out.
Fixes: f1982740f5e7 ("iov_iter: Convert iterate*() to inline funcs")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Tong Tiangen <tongtiangen@huawei.com>
Link: https://lore.kernel.org/r/20240305133336.3804360-1-tongtiangen@huawei.com
Link: https://lore.kernel.org/all/4e80924d-9c85-f13a-722a-6a5d2b1c225a@huawei.com/
Tested-by: David Howells <dhowells@redhat.com>
Reviewed-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Reported-by: Tong Tiangen <tongtiangen@huawei.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Convert test-string_helpers.c to KUnit so it can be easily run with
everything else.
Failure reporting doesn't need to be open-coded in most places, for
example, forcing a failure in the expected output for upper/lower
testing looks like this:
[12:18:43] # test_upper_lower: EXPECTATION FAILED at lib/string_helpers_kunit.c:579
[12:18:43] Expected dst == strings_upper[i].out, but
[12:18:43] dst == "ABCDEFGH1234567890TEST"
[12:18:43] strings_upper[i].out == "ABCDEFGH1234567890TeST"
[12:18:43] [FAILED] test_upper_lower
Currently passes without problems:
$ ./tools/testing/kunit/kunit.py run string_helpers
...
[12:23:55] Starting KUnit Kernel (1/1)...
[12:23:55] ============================================================
[12:23:55] =============== string_helpers (3 subtests) ================
[12:23:55] [PASSED] test_get_size
[12:23:55] [PASSED] test_upper_lower
[12:23:55] [PASSED] test_unescape
[12:23:55] ================= [PASSED] string_helpers ==================
[12:23:55] ============================================================
[12:23:55] Testing complete. Ran 3 tests: passed: 3
[12:23:55] Elapsed time: 6.709s total, 0.001s configuring, 6.591s building, 0.066s running
Link: https://lore.kernel.org/r/20240301202732.2688342-2-keescook@chromium.org
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
Convert test_string.c to KUnit so it can be easily run with everything
else.
Additional text context is retained for failure reporting. For example,
when forcing a bad match, we can see the loop counters reported for the
memset() tests:
[09:21:52] # test_memset64: ASSERTION FAILED at lib/string_kunit.c:93
[09:21:52] Expected v == 0xa2a1a1a1a1a1a1a1ULL, but
[09:21:52] v == -6799976246779207263 (0xa1a1a1a1a1a1a1a1)
[09:21:52] 0xa2a1a1a1a1a1a1a1ULL == -6727918652741279327 (0xa2a1a1a1a1a1a1a1)
[09:21:52] i:0 j:0 k:0
[09:21:52] [FAILED] test_memset64
Currently passes without problems:
$ ./tools/testing/kunit/kunit.py run string
...
[09:37:40] Starting KUnit Kernel (1/1)...
[09:37:40] ============================================================
[09:37:40] =================== string (6 subtests) ====================
[09:37:40] [PASSED] test_memset16
[09:37:40] [PASSED] test_memset32
[09:37:40] [PASSED] test_memset64
[09:37:40] [PASSED] test_strchr
[09:37:40] [PASSED] test_strnchr
[09:37:40] [PASSED] test_strspn
[09:37:40] ===================== [PASSED] string ======================
[09:37:40] ============================================================
[09:37:40] Testing complete. Ran 6 tests: passed: 6
[09:37:40] Elapsed time: 6.730s total, 0.001s configuring, 6.562s building, 0.131s running
Link: https://lore.kernel.org/r/20240301202732.2688342-1-keescook@chromium.org
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
The new flags parameter allows controlling
- Whether or not the units suffix is separated by a space, for
compatibility with sort -h
- Whether or not to append a B suffix - we're not always printing
bytes.
Co-developed-by: Kent Overstreet <kent.overstreet@linux.dev>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Kent Overstreet <kent.overstreet@linux.dev>
Link: https://lore.kernel.org/r/20240229205345.93902-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
net/mptcp/protocol.c
adf1bb78dab5 ("mptcp: fix snd_wnd initialization for passive socket")
9426ce476a70 ("mptcp: annotate lockless access for RX path fields")
https://lore.kernel.org/all/20240228103048.19255709@canb.auug.org.au/
Adjacent changes:
drivers/dpll/dpll_core.c
0d60d8df6f49 ("dpll: rely on rcu for netdev_dpll_pin()")
e7f8df0e81bf ("dpll: move xa_erase() call in to match dpll_pin_alloc() error path order")
drivers/net/veth.c
1ce7d306ea63 ("veth: try harder when allocating queue memory")
0bef512012b1 ("net: add netdev_lockdep_set_classes() to virtual drivers")
drivers/net/wireless/intel/iwlwifi/mvm/d3.c
8c9bef26e98b ("wifi: iwlwifi: mvm: d3: implement suspend with MLO")
78f65fbf421a ("wifi: iwlwifi: mvm: ensure offloading TID queue exists")
net/wireless/nl80211.c
f78c1375339a ("wifi: nl80211: reject iftype change with mesh ID change")
414532d8aa89 ("wifi: cfg80211: use IEEE80211_MAX_MESH_ID_LEN appropriately")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
For reasons I cannot understand, m68k moves the start of the stack frame
for consecutive calls to the same function if the function's test
variable is larger than 8 bytes. This was only happening for the char
array test (obviously), so adjust the length of the string for m68k
only. I want the array size to be longer than "unsigned long" for every
given architecture, so the other remain unchanged.
Additionally adjust the error message to be a bit more clear about
what's happened, and move the KUNIT check outside of the consecutive
calls to minimize what happens between them.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Closes: https://lore.kernel.org/lkml/a0d10d50-2720-4ecd-a2c6-c2c5e5aeee65@roeck-us.net/
Tested-by: Guenter Roeck <linux@roeck-us.net>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Closes: https://lore.kernel.org/r/CAMuHMdX_g1tbiUL9PUQdqaegrEzCNN3GtbSvSBFYAL4TzvstFg@mail.gmail.com
Closes: https://lore.kernel.org/r/CAMuHMdW6N40+0gGQ+LSrN64Mo4A0-ELAm0pR3gWQ0mNanyBuUQ@mail.gmail.com
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/all/a4bf4063-194f-4740-9c1d-88f9ab38b778@roeck-us.net
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
Improve the reporting of buffer overflows under CONFIG_FORTIFY_SOURCE to
help accelerate debugging efforts. The calculations are all just sitting
in registers anyway, so pass them along to the function to be reported.
For example, before:
detected buffer overflow in memcpy
and after:
memcpy: detected buffer overflow: 4096 byte read of buffer size 1
Link: https://lore.kernel.org/r/20230407192717.636137-10-keescook@chromium.org
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
With fortify overflows able to be redirected, we can use KUnit to
exercise the overflow conditions. Add tests for every API covered by
CONFIG_FORTIFY_SOURCE, except for memset() and memcpy(), which are
special-cased for now.
Disable warnings in the Makefile since we're explicitly testing
known-bad string handling code patterns.
Note that this makes the LKDTM FORTIFY_STR* tests obsolete, but those
can be removed separately.
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
The standard C string APIs were not designed to have a failure mode;
they were expected to always succeed without memory safety issues.
Normally, CONFIG_FORTIFY_SOURCE will use fortify_panic() to stop
processing, as truncating a read or write may provide an even worse
system state. However, this creates a problem for testing under things
like KUnit, which needs a way to survive failures.
When building with CONFIG_KUNIT, provide a failure path for all users
of fortify_panic, and track whether the failure was a read overflow or
a write overflow, for KUnit tests to examine. Inspired by similar logic
in the slab tests.
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
In order for CI systems to notice all the skipped tests related to
CONFIG_FORTIFY_SOURCE, allow the FORTIFY_SOURCE KUnit tests to build
with or without CONFIG_FORTIFY_SOURCE.
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
In preparation for KUnit testing and further improvements in fortify
failure reporting, split out the report and encode the function and access
failure (read or write overflow) into a single u8 argument. This mainly
ends up saving a tiny bit of space in the data segment. For a defconfig
with FORTIFY_SOURCE enabled:
$ size gcc/vmlinux.before gcc/vmlinux.after
text data bss dec hex filename
26132309 9760658 2195460 38088427 2452eeb gcc/vmlinux.before
26132386 9748382 2195460 38076228 244ff44 gcc/vmlinux.after
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
This allows replacements of the idioms "var += offset" and "var -=
offset" with the wrapping_assign_add() and wrapping_assign_sub() helpers
respectively. They will avoid wrap-around sanitizer instrumentation.
Add to the selftests to validate behavior and lack of side-effects.
Reviewed-by: Marco Elver <elver@google.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
Provide helpers that will perform wrapping addition, subtraction, or
multiplication without tripping the arithmetic wrap-around sanitizers. The
first argument is the type under which the wrap-around should happen
with. In other words, these two calls will get very different results:
wrapping_mul(int, 50, 50) == 2500
wrapping_mul(u8, 50, 50) == 196
Add to the selftests to validate behavior and lack of side-effects.
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Marco Elver <elver@google.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth, WiFi and netfilter.
We have one outstanding issue with the stmmac driver, which may be a
LOCKDEP false positive, not a blocker.
Current release - regressions:
- netfilter: nf_tables: re-allow NFPROTO_INET in
nft_(match/target)_validate()
- eth: ionic: fix error handling in PCI reset code
Current release - new code bugs:
- eth: stmmac: complete meta data only when enabled, fix null-deref
- kunit: fix again checksum tests on big endian CPUs
Previous releases - regressions:
- veth: try harder when allocating queue memory
- Bluetooth:
- hci_bcm4377: do not mark valid bd_addr as invalid
- hci_event: fix handling of HCI_EV_IO_CAPA_REQUEST
Previous releases - always broken:
- info leak in __skb_datagram_iter() on netlink socket
- mptcp:
- map v4 address to v6 when destroying subflow
- fix potential wake-up event loss due to sndbuf auto-tuning
- fix double-free on socket dismantle
- wifi: nl80211: reject iftype change with mesh ID change
- fix small out-of-bound read when validating netlink be16/32 types
- rtnetlink: fix error logic of IFLA_BRIDGE_FLAGS writing back
- ipv6: fix potential "struct net" ref-leak in inet6_rtm_getaddr()
- ip_tunnel: prevent perpetual headroom growth with huge number of
tunnels on top of each other
- mctp: fix skb leaks on error paths of mctp_local_output()
- eth: ice: fixes for DPLL state reporting
- dpll: rely on rcu for netdev_dpll_pin() to prevent UaF
- eth: dpaa: accept phy-interface-type = '10gbase-r' in the device
tree"
* tag 'net-6.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (73 commits)
dpll: fix build failure due to rcu_dereference_check() on unknown type
kunit: Fix again checksum tests on big endian CPUs
tls: fix use-after-free on failed backlog decryption
tls: separate no-async decryption request handling from async
tls: fix peeking with sync+async decryption
tls: decrement decrypt_pending if no async completion will be called
gtp: fix use-after-free and null-ptr-deref in gtp_newlink()
net: hsr: Use correct offset for HSR TLV values in supervisory HSR frames
igb: extend PTP timestamp adjustments to i211
rtnetlink: fix error logic of IFLA_BRIDGE_FLAGS writing back
tools: ynl: fix handling of multiple mcast groups
selftests: netfilter: add bridge conntrack + multicast test case
netfilter: bridge: confirm multicast packets before passing them up the stack
netfilter: nf_tables: allow NFPROTO_INET in nft_(match/target)_validate()
Bluetooth: qca: Fix triggering coredump implementation
Bluetooth: hci_qca: Set BDA quirk bit if fwnode exists in DT
Bluetooth: qca: Fix wrong event type for patch config command
Bluetooth: Enforce validation on max value of connection interval
Bluetooth: hci_event: Fix handling of HCI_EV_IO_CAPA_REQUEST
Bluetooth: mgmt: Fix limited discoverable off timeout
...
|
|
Commit b38460bc463c ("kunit: Fix checksum tests on big endian CPUs")
fixed endianness issues with kunit checksum tests, but then
commit 6f4c45cbcb00 ("kunit: Add tests for csum_ipv6_magic and
ip_fast_csum") introduced new issues on big endian CPUs. Those issues
are once again reflected by the warnings reported by sparse.
So, fix them with the same approach, perform proper conversion in
order to support both little and big endian CPUs. Once the conversions
are properly done and the right types used, the sparse warnings are
cleared as well.
Reported-by: Erhard Furtner <erhard_f@mailbox.org>
Fixes: 6f4c45cbcb00 ("kunit: Add tests for csum_ipv6_magic and ip_fast_csum")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Tested-by: Charlie Jenkins <charlie@rivosinc.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/73df3a9e95c2179119398ad1b4c84cdacbd8dfb6.1708684443.git.christophe.leroy@csgroup.eu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The debugging code enabled by CONFIG_DEBUG_RWSEMS=y will only be
compiled in when CONFIG_PREEMPT_RT isn't set. There is no point to
allow CONFIG_DEBUG_RWSEMS to be set in a kernel configuration where
CONFIG_PREEMPT_RT is also set. Make them mutually exclusive.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240222150540.79981-5-longman@redhat.com
|
|
The 'i' passed as an assertion message is a size_t, so should use '%zu',
not '%d'.
This was found by annotating the _MSG() variants of KUnit's assertions
to let gcc validate the format strings.
Fixes: bb95ebbe89a7 ("lib: Introduce CONFIG_MEMCPY_KUNIT_TEST")
Signed-off-by: David Gow <davidgow@google.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Justin Stitt <justinstitt@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
The correct format specifier for p - n (both p and n are pointers) is
%td, as the type should be ptrdiff_t.
This was discovered by annotating KUnit assertion macros with gcc's
printf specifier, but note that gcc incorrectly suggested a %d or %ld
specifier (depending on the pointer size of the architecture being
built).
Fixes: 0ea09083116d ("lib/cmdline: Allow get_options() to take 0 to validate the input")
Signed-off-by: David Gow <davidgow@google.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Daniel Latypov <dlatypov@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
KUnit's executor_test logs the filter string in KUNIT_ASSERT_EQ_MSG(),
but passed a random character from the filter, rather than the whole
string.
This was found by annotating KUNIT_ASSERT_EQ_MSG() to let gcc validate
the format string.
Fixes: 76066f93f1df ("kunit: add tests for filtering attributes")
Signed-off-by: David Gow <davidgow@google.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: Rae Moar <rmoar@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Commit d393acce7b3f ("drm/tests: Switch to kunit devices") switched the
DRM device creation helpers from an ad-hoc implementation to the new
kunit device creation helpers introduced in commit d03c720e03bd ("kunit:
Add APIs for managing devices").
However, while the DRM helpers were using a platform_device, the kunit
helpers are using a dedicated bus and device type.
That situation creates small differences in the initialisation, and one
of them is that the kunit devices do not have the DMA masks setup. In
turn, this means that we can't do any kind of DMA buffer allocation
anymore, which creates a regression on some (downstream for now) tests.
Let's set up a default DMA mask that should work on any platform to fix
it.
Fixes: d03c720e03bd ("kunit: Add APIs for managing devices")
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Since commit d492cc2573a0 ("driver core: device.h: make struct
bus_type a const *"), the driver core can properly handle constant
struct bus_type, move the kunit_bus_type variable to be a constant
structure as well, placing it into read-only memory which can not be
modified at runtime.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
By allowing the filter_glob parameter to be written to, it's possible to
tweak the testsuites that will be executed on new module loads. This
makes it easier to run specific tests without having to reload kunit and
provides a way to filter tests on real HW even if kunit is builtin.
Example for xe driver:
1) Run just 1 test
# echo -n xe_bo > /sys/module/kunit/parameters/filter_glob
# modprobe -r xe_live_test
# modprobe xe_live_test
# ls /sys/kernel/debug/kunit/
xe_bo
2) Run all tests
# echo \* > /sys/module/kunit/parameters/filter_glob
# modprobe -r xe_live_test
# modprobe xe_live_test
# ls /sys/kernel/debug/kunit/
xe_bo xe_dma_buf xe_migrate xe_mocs
For completeness and to cover other use cases, also change filter and
filter_action to rw.
Link: https://lore.kernel.org/intel-xe/dzacvbdditbneiu3e3fmstjmttcbne44yspumpkd6sjn56jqpk@vxu7sksbqrp6/
Reviewed-by: Rae Moar <rmoar@google.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
With the introduction of stack depot evictions, each stack record is now
fixed size, so that future reuse after an eviction can safely store
differently sized stack traces. In all cases that do not make use of
evictions, this wastes lots of space.
Fix it by re-introducing variable size stack records (up to the max
allowed size) for entries that will never be evicted. We know if an entry
will never be evicted if the flag STACK_DEPOT_FLAG_GET is not provided,
since a later stack_depot_put() attempt is undefined behavior.
With my current kernel config that enables KASAN and also SLUB owner
tracking, I observe (after a kernel boot) a whopping reduction of 296
stack depot pools, which translates into 4736 KiB saved. The savings here
are from SLUB owner tracking only, because KASAN generic mode still uses
refcounting.
Before:
pools: 893
allocations: 29841
frees: 6524
in_use: 23317
freelist_size: 3454
After:
pools: 597
refcounted_allocations: 17547
refcounted_frees: 6477
refcounted_in_use: 11070
freelist_size: 3497
persistent_count: 12163
persistent_bytes: 1717008
[elver@google.com: fix -Wstringop-overflow warning]
Link: https://lore.kernel.org/all/20240201135747.18eca98e@canb.auug.org.au/
Link: https://lkml.kernel.org/r/20240201090434.1762340-1-elver@google.com
Link: https://lore.kernel.org/all/CABXGCsOzpRPZGg23QqJAzKnqkZPKzvieeg=W7sgjgi3q0pBo0g@mail.gmail.com/
Link: https://lkml.kernel.org/r/20240129100708.39460-1-elver@google.com
Link: https://lore.kernel.org/all/CABXGCsOzpRPZGg23QqJAzKnqkZPKzvieeg=W7sgjgi3q0pBo0g@mail.gmail.com/
Fixes: 108be8def46e ("lib/stackdepot: allow users to evict stack traces")
Signed-off-by: Marco Elver <elver@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
BUG: KMSAN: uninit-value in nla_validate_range_unsigned lib/nlattr.c:222 [inline]
BUG: KMSAN: uninit-value in nla_validate_int_range lib/nlattr.c:336 [inline]
BUG: KMSAN: uninit-value in validate_nla lib/nlattr.c:575 [inline]
BUG: KMSAN: uninit-value in __nla_validate_parse+0x2e20/0x45c0 lib/nlattr.c:631
nla_validate_range_unsigned lib/nlattr.c:222 [inline]
nla_validate_int_range lib/nlattr.c:336 [inline]
validate_nla lib/nlattr.c:575 [inline]
...
The message in question matches this policy:
[NFTA_TARGET_REV] = NLA_POLICY_MAX(NLA_BE32, 255),
but because NLA_BE32 size in minlen array is 0, the validation
code will read past the malformed (too small) attribute.
Note: Other attributes, e.g. BITFIELD32, SINT, UINT.. are also missing:
those likely should be added too.
Reported-by: syzbot+3f497b07aa3baf2fb4d0@syzkaller.appspotmail.com
Reported-by: xingwei lee <xrivendell7@gmail.com>
Closes: https://lore.kernel.org/all/CABOYnLzFYHSnvTyS6zGa-udNX55+izqkOt2sB9WDqUcEGW6n8w@mail.gmail.com/raw
Fixes: ecaf75ffd5f5 ("netlink: introduce bigendian integer types")
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20240221172740.5092-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
net/ipv4/udp.c
f796feabb9f5 ("udp: add local "peek offset enabled" flag")
56667da7399e ("net: implement lockless setsockopt(SO_PEEK_OFF)")
Adjacent changes:
net/unix/garbage.c
aa82ac51d633 ("af_unix: Drop oob_skb ref before purging queue in GC.")
11498715f266 ("af_unix: Remove io_uring code for GC.")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://lore.kernel.org/r/170820083431.6328.16233178852085891453.stgit@91.116.238.104.host.secureserver.net
Pull simple offset series from Chuck Lever
In an effort to address slab fragmentation issues reported a few
months ago, I've replaced the use of xarrays for the directory
offset map in "simple" file systems (including tmpfs).
Thanks to Liam Howlett for helping me get this working with Maple
Trees.
* series 'Use Maple Trees for simple_offset utilities' of https://lore.kernel.org/r/170820083431.6328.16233178852085891453.stgit@91.116.238.104.host.secureserver.net: (6 commits)
libfs: Convert simple directory offsets to use a Maple Tree
test_maple_tree: testing the cyclic allocation
maple_tree: Add mtree_alloc_cyclic()
libfs: Add simple_offset_empty()
libfs: Define a minimum directory offset
libfs: Re-arrange locking in offset_iterate_dir()
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
This tests the interactions of the cyclic allocations, the maple state
index and last, and overflow.
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://lore.kernel.org/r/170820144894.6328.13052830860966450674.stgit@91.116.238.104.host.secureserver.net
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
I need a cyclic allocator for the simple_offset implementation in
fs/libfs.c.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://lore.kernel.org/r/170820144179.6328.12838600511394432325.stgit@91.116.238.104.host.secureserver.net
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Using sizeof(dst) for the "size" argument in strscpy() is the
overwhelmingly common case. Instead of requiring this everywhere, allow a
2-argument version to be used that will use the sizeof() internally. There
are other functions in the kernel with optional arguments[1], so this
isn't unprecedented, and improves readability. Update and relocate the
kern-doc for strscpy() too, and drop __HAVE_ARCH_STRSCPY as it is unused.
Adjust ARCH=um build to notice the changed export name, as it doesn't
do full header includes for the string helpers.
This could additionally let us save a few hundred lines of code:
1177 files changed, 2455 insertions(+), 3026 deletions(-)
with a treewide cleanup using Coccinelle:
@needless_arg@
expression DST, SRC;
@@
strscpy(DST, SRC
-, sizeof(DST)
)
Link: https://elixir.bootlin.com/linux/v6.7/source/include/linux/pci.h#L1517 [1]
Reviewed-by: Justin Stitt <justinstitt@google.com>
Cc: Andy Shevchenko <andy@kernel.org>
Cc: linux-hardening@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
In preparation for making strscpy_pad()'s 3rd argument optional, redefine
it as a macro. This also has the benefit of allowing greater FORITFY
introspection, as it couldn't see into the strscpy() nor the memset()
within strscpy_pad().
Cc: Andy Shevchenko <andy@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: <linux-hardening@vger.kernel.org>
Reviewed-by: Justin Stitt <justinstitt@google.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
In order to mitigate unexpected signed wrap-around[1], bring back the
signed integer overflow sanitizer. It was removed in commit 6aaa31aeb9cf
("ubsan: remove overflow checks") because it was effectively a no-op
when combined with -fno-strict-overflow (which correctly changes signed
overflow from being "undefined" to being explicitly "wrap around").
Compilers are adjusting their sanitizers to trap wrap-around and to
detecting common code patterns that should not be instrumented
(e.g. "var + offset < var"). Prepare for this and explicitly rename
the option from "OVERFLOW" to "WRAP" to more accurately describe the
behavior.
To annotate intentional wrap-around arithmetic, the helpers
wrapping_add/sub/mul_wrap() can be used for individual statements. At
the function level, the __signed_wrap attribute can be used to mark an
entire function as expecting its signed arithmetic to wrap around. For a
single object file the Makefile can use "UBSAN_SIGNED_WRAP_target.o := n"
to mark it as wrapping, and for an entire directory, "UBSAN_SIGNED_WRAP :=
n" can be used.
Additionally keep these disabled under CONFIG_COMPILE_TEST for now.
Link: https://github.com/KSPP/linux/issues/26 [1]
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Hao Luo <haoluo@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Reviewed-by: Justin Stitt <justinstitt@google.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
Trying to run the iov_iter unit test on a nommu system such as the qemu
kc705-nommu emulation results in a crash.
KTAP version 1
# Subtest: iov_iter
# module: kunit_iov_iter
1..9
BUG: failure at mm/nommu.c:318/vmap()!
Kernel panic - not syncing: BUG!
The test calls vmap() directly, but vmap() is not supported on nommu
systems, causing the crash. TEST_IOV_ITER therefore needs to depend on
MMU.
Link: https://lkml.kernel.org/r/20240208153010.1439753-1-linux@roeck-us.net
Fixes: 2d71340ff1d4 ("iov_iter: Kunit tests for copying to/from an iterator")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Cc: David Howells <dhowells@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here are some driver core fixes, a kobject fix, and a documentation
update for 6.8-rc5. In detail these changes are:
- devlink fixes for reported issues with 6.8-rc1
- topology scheduling regression fix that has been reported by many
- kobject loosening of checks change in -rc1 is now reverted as some
codepaths seemed to need the checks
- documentation update for the CVE process. Has been reviewed by
many, the last minute change to the document was to bring the .rst
format back into the the new style rules, the contents did not
change.
All of these, except for the documentation update, have been in
linux-next for over a week. The documentation update has been reviewed
for weeks by a group of developers, and in public for a week and the
wording has stabilized for now. If future changes are needed, we can
do so before 6.8-final is out (or anytime after that)"
* tag 'driver-core-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
Documentation: Document the Linux Kernel CVE process
Revert "kobject: Remove redundant checks for whether ktype is NULL"
driver core: fw_devlink: Improve logs for cycle detection
driver core: fw_devlink: Improve detection of overlapping cycles
driver core: Fix device_link_flag_is_sync_state_only()
topology: Set capacity_freq_ref in all cases
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix the #ifndef that didn't have the 'CONFIG_' prefix on
HAVE_DYNAMIC_FTRACE_WITH_REGS
The fix to have dynamic trampolines work with x86 broke arm64 as the
config used in the #ifdef was HAVE_DYNAMIC_FTRACE_WITH_REGS and not
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS which removed the fix that the
previous fix was to fix.
- Fix tracing_on state
The code to test if "tracing_on" is set incorrectly used
ring_buffer_record_is_on() which returns false if the ring buffer
isn't able to be written to.
But the ring buffer disable has several bits that disable it. One is
internal disabling which is used for resizing and other modifications
of the ring buffer. But the "tracing_on" user space visible flag
should only report if tracing is actually on and not internally
disabled, as this can cause confusion as writing "1" when it is
disabled will not enable it.
Instead use ring_buffer_record_is_set_on() which shows the user space
visible settings.
- Fix a false positive kmemleak on saved cmdlines
Now that the saved_cmdlines structure is allocated via alloc_page()
and not via kmalloc() it has become invisible to kmemleak. The
allocation done to one of its pointers was flagged as a dangling
allocation leak. Make kmemleak aware of this allocation and free.
- Fix synthetic event dynamic strings
An update that cleaned up the synthetic event code removed the return
value of trace_string(), and had it return zero instead of the
length, causing dynamic strings in the synthetic event to always have
zero size.
- Clean up documentation and header files for seq_buf
* tag 'trace-v6.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
seq_buf: Fix kernel documentation
seq_buf: Don't use "proxy" headers
tracing/synthetic: Fix trace_string() return value
tracing: Inform kmemleak of saved_cmdlines allocation
tracing: Use ring_buffer_record_is_set_on() in tracer_tracing_is_on()
tracing: Fix HAVE_DYNAMIC_FTRACE_WITH_REGS ifdef
|
|
Move the s390 specific raid6 inline assemblies, make them generic, and
reuse them to implement the raid6 gen/xor implementation.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
The kernel_fpu structure has a quite large size of 520 bytes. In order to
reduce stack footprint introduce several kernel fpu structures with
different and also smaller sizes. This way every kernel fpu user must use
the correct variant. A compile time check verifies that the correct variant
is used.
There are several users which use only 16 instead of all 32 vector
registers. For those users the new kernel_fpu_16 structure with a size of
only 266 bytes can be used.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Move, rename, and merge the fpu and vx header files. This way fpu header
files have a consistent naming scheme (fpu*.h).
Also get rid of the fpu subdirectory and move header files to asm
directory, so that all fpu and vx header files can be found at the same
location.
Merge internal.h header file into other header files, since the internal
helpers are used at many locations. so those helper functions are really
not internal.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Cross-merge networking fixes after downstream PR.
No conflicts.
Adjacent changes:
net/core/dev.c
9f30831390ed ("net: add rcu safety to rtnl_prop_list_size()")
723de3ebef03 ("net: free altname using an RCU callback")
net/unix/garbage.c
11498715f266 ("af_unix: Remove io_uring code for GC.")
25236c91b5ab ("af_unix: Fix task hung while purging oob_skb in GC.")
drivers/net/ethernet/renesas/ravb_main.c
ed4adc07207d ("net: ravb: Count packets instead of descriptors in GbEth RX path"
)
c2da9408579d ("ravb: Add Rx checksum offload support for GbEth")
net/mptcp/protocol.c
bdd70eb68913 ("mptcp: drop the push_pending field")
28e5c1380506 ("mptcp: annotate lockless accesses around read-mostly fields")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There are plenty of issues with the kernel documentation here:
- misspelled word "sequence"
- different style of returned value descriptions
- missed Return sections
- unaligned style of ASCII / NUL-terminated / etc
- wrong function references
Fix all these.
Link: https://lkml.kernel.org/r/20240215152506.598340-1-andriy.shevchenko@linux.intel.com
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
Linus Torvalds
Andy Shevchenko
Jakub Kicinski
Kees Cook
Christophe Leroy
Waiman Long
David Gow
Maxime Ripard
Ricardo B. Marliere
Lucas De Marchi
Marco Elver
Florian Westphal
Christian Brauner
Liam R. Howlett
Chuck Lever
Guenter Roeck
Heiko Carstens
