| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Commit e48c414ee61f ("[INET]: Generalise the TCP sock ID lookup routines")
commented out the definition of SOCK_REFCNT_DEBUG in 2005 and later another
commit 463c84b97f24 ("[NET]: Introduce inet_connection_sock") removed it.
Since we could track all of them through bpf and kprobe related tools
and the feature could print loads of information which might not be
that helpful even under a little bit pressure, the whole feature which
has been inactive for many years is no longer supported.
Link: https://lore.kernel.org/lkml/20230211065153.54116-1-kerneljasonxing@gmail.com/
Suggested-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Wenjia Zhang <wenjia@linux.ibm.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
net/devlink/leftover.c / net/core/devlink.c:
565b4824c39f ("devlink: change port event netdev notifier from per-net to global")
f05bd8ebeb69 ("devlink: move code to a dedicated directory")
687125b5799c ("devlink: split out core code")
https://lore.kernel.org/all/20230208094657.379f2b1a@canb.auug.org.au/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This code fix a bug that sk->sk_txrehash gets its default enable
value from sysctl_txrehash only when the socket is a TCP listener.
We should have sysctl_txrehash to set the default sk->sk_txrehash,
no matter TCP, nor listerner/connector.
Tested by following packetdrill:
0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3
+0 socket(..., SOCK_DGRAM, IPPROTO_UDP) = 4
// SO_TXREHASH == 74, default to sysctl_txrehash == 1
+0 getsockopt(3, SOL_SOCKET, 74, [1], [4]) = 0
+0 getsockopt(4, SOL_SOCKET, 74, [1], [4]) = 0
Fixes: 26859240e4ee ("txhash: Add socket option to control TX hash rethink behavior")
Signed-off-by: Kevin Yang <yyd@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Users who want to share a single public IP address for outgoing connections
between several hosts traditionally reach for SNAT. However, SNAT requires
state keeping on the node(s) performing the NAT.
A stateless alternative exists, where a single IP address used for egress
can be shared between several hosts by partitioning the available ephemeral
port range. In such a setup:
1. Each host gets assigned a disjoint range of ephemeral ports.
2. Applications open connections from the host-assigned port range.
3. Return traffic gets routed to the host based on both, the destination IP
and the destination port.
An application which wants to open an outgoing connection (connect) from a
given port range today can choose between two solutions:
1. Manually pick the source port by bind()'ing to it before connect()'ing
the socket.
This approach has a couple of downsides:
a) Search for a free port has to be implemented in the user-space. If
the chosen 4-tuple happens to be busy, the application needs to retry
from a different local port number.
Detecting if 4-tuple is busy can be either easy (TCP) or hard
(UDP). In TCP case, the application simply has to check if connect()
returned an error (EADDRNOTAVAIL). That is assuming that the local
port sharing was enabled (REUSEADDR) by all the sockets.
# Assume desired local port range is 60_000-60_511
s = socket(AF_INET, SOCK_STREAM)
s.setsockopt(SOL_SOCKET, SO_REUSEADDR, 1)
s.bind(("192.0.2.1", 60_000))
s.connect(("1.1.1.1", 53))
# Fails only if 192.0.2.1:60000 -> 1.1.1.1:53 is busy
# Application must retry with another local port
In case of UDP, the network stack allows binding more than one socket
to the same 4-tuple, when local port sharing is enabled
(REUSEADDR). Hence detecting the conflict is much harder and involves
querying sock_diag and toggling the REUSEADDR flag [1].
b) For TCP, bind()-ing to a port within the ephemeral port range means
that no connecting sockets, that is those which leave it to the
network stack to find a free local port at connect() time, can use
the this port.
IOW, the bind hash bucket tb->fastreuse will be 0 or 1, and the port
will be skipped during the free port search at connect() time.
2. Isolate the app in a dedicated netns and use the use the per-netns
ip_local_port_range sysctl to adjust the ephemeral port range bounds.
The per-netns setting affects all sockets, so this approach can be used
only if:
- there is just one egress IP address, or
- the desired egress port range is the same for all egress IP addresses
used by the application.
For TCP, this approach avoids the downsides of (1). Free port search and
4-tuple conflict detection is done by the network stack:
system("sysctl -w net.ipv4.ip_local_port_range='60000 60511'")
s = socket(AF_INET, SOCK_STREAM)
s.setsockopt(SOL_IP, IP_BIND_ADDRESS_NO_PORT, 1)
s.bind(("192.0.2.1", 0))
s.connect(("1.1.1.1", 53))
# Fails if all 4-tuples 192.0.2.1:60000-60511 -> 1.1.1.1:53 are busy
For UDP this approach has limited applicability. Setting the
IP_BIND_ADDRESS_NO_PORT socket option does not result in local source
port being shared with other connected UDP sockets.
Hence relying on the network stack to find a free source port, limits the
number of outgoing UDP flows from a single IP address down to the number
of available ephemeral ports.
To put it another way, partitioning the ephemeral port range between hosts
using the existing Linux networking API is cumbersome.
To address this use case, add a new socket option at the SOL_IP level,
named IP_LOCAL_PORT_RANGE. The new option can be used to clamp down the
ephemeral port range for each socket individually.
The option can be used only to narrow down the per-netns local port
range. If the per-socket range lies outside of the per-netns range, the
latter takes precedence.
UAPI-wise, the low and high range bounds are passed to the kernel as a pair
of u16 values in host byte order packed into a u32. This avoids pointer
passing.
PORT_LO = 40_000
PORT_HI = 40_511
s = socket(AF_INET, SOCK_STREAM)
v = struct.pack("I", PORT_HI << 16 | PORT_LO)
s.setsockopt(SOL_IP, IP_LOCAL_PORT_RANGE, v)
s.bind(("127.0.0.1", 0))
s.getsockname()
# Local address between ("127.0.0.1", 40_000) and ("127.0.0.1", 40_511),
# if there is a free port. EADDRINUSE otherwise.
[1] https://github.com/cloudflare/cloudflare-blog/blob/232b432c1d57/2022-02-connectx/connectx.py#L116
Reviewed-by: Marek Majkowski <marek@cloudflare.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When an ULP-enabled socket enters the LISTEN status, the listener ULP data
pointer is copied inside the child/accepted sockets by sk_clone_lock().
The relevant ULP can take care of de-duplicating the context pointer via
the clone() operation, but only MPTCP and SMC implement such op.
Other ULPs may end-up with a double-free at socket disposal time.
We can't simply clear the ULP data at clone time, as TLS replaces the
socket ops with custom ones assuming a valid TLS ULP context is
available.
Instead completely prevent clone-less ULP sockets from entering the
LISTEN status.
Fixes: 734942cc4ea6 ("tcp: ULP infrastructure")
Reported-by: slipper <slipper.alive@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/4b80c3d1dbe3d0ab072f80450c202d9bc88b4b03.1672740602.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Jiri Slaby reported regression of bind() with a simple repro. [0]
The repro creates a TIME_WAIT socket and tries to bind() a new socket
with the same local address and port. Before commit 28044fc1d495 ("net:
Add a bhash2 table hashed by port and address"), the bind() failed with
-EADDRINUSE, but now it succeeds.
The cited commit should have put TIME_WAIT sockets into bhash2; otherwise,
inet_bhash2_conflict() misses TIME_WAIT sockets when validating bind()
requests if the address is not a wildcard one.
The straight option is to move sk_bind2_node from struct sock to struct
sock_common to add twsk to bhash2 as implemented as RFC. [1] However, the
binary layout change in the struct sock could affect performances moving
hot fields on different cachelines.
To avoid that, we add another TIME_WAIT list in inet_bind2_bucket and check
it while validating bind().
[0]: https://lore.kernel.org/netdev/6b971a4e-c7d8-411e-1f92-fda29b5b2fb9@kernel.org/
[1]: https://lore.kernel.org/netdev/20221221151258.25748-2-kuniyu@amazon.com/
Fixes: 28044fc1d495 ("net: Add a bhash2 table hashed by port and address")
Reported-by: Jiri Slaby <jirislaby@kernel.org>
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"Core:
- Allow live renaming when an interface is up
- Add retpoline wrappers for tc, improving considerably the
performances of complex queue discipline configurations
- Add inet drop monitor support
- A few GRO performance improvements
- Add infrastructure for atomic dev stats, addressing long standing
data races
- De-duplicate common code between OVS and conntrack offloading
infrastructure
- A bunch of UBSAN_BOUNDS/FORTIFY_SOURCE improvements
- Netfilter: introduce packet parser for tunneled packets
- Replace IPVS timer-based estimators with kthreads to scale up the
workload with the number of available CPUs
- Add the helper support for connection-tracking OVS offload
BPF:
- Support for user defined BPF objects: the use case is to allocate
own objects, build own object hierarchies and use the building
blocks to build own data structures flexibly, for example, linked
lists in BPF
- Make cgroup local storage available to non-cgroup attached BPF
programs
- Avoid unnecessary deadlock detection and failures wrt BPF task
storage helpers
- A relevant bunch of BPF verifier fixes and improvements
- Veristat tool improvements to support custom filtering, sorting,
and replay of results
- Add LLVM disassembler as default library for dumping JITed code
- Lots of new BPF documentation for various BPF maps
- Add bpf_rcu_read_{,un}lock() support for sleepable programs
- Add RCU grace period chaining to BPF to wait for the completion of
access from both sleepable and non-sleepable BPF programs
- Add support storing struct task_struct objects as kptrs in maps
- Improve helper UAPI by explicitly defining BPF_FUNC_xxx integer
values
- Add libbpf *_opts API-variants for bpf_*_get_fd_by_id() functions
Protocols:
- TCP: implement Protective Load Balancing across switch links
- TCP: allow dynamically disabling TCP-MD5 static key, reverting back
to fast[er]-path
- UDP: Introduce optional per-netns hash lookup table
- IPv6: simplify and cleanup sockets disposal
- Netlink: support different type policies for each generic netlink
operation
- MPTCP: add MSG_FASTOPEN and FastOpen listener side support
- MPTCP: add netlink notification support for listener sockets events
- SCTP: add VRF support, allowing sctp sockets binding to VRF devices
- Add bridging MAC Authentication Bypass (MAB) support
- Extensions for Ethernet VPN bridging implementation to better
support multicast scenarios
- More work for Wi-Fi 7 support, comprising conversion of all the
existing drivers to internal TX queue usage
- IPSec: introduce a new offload type (packet offload) allowing
complete header processing and crypto offloading
- IPSec: extended ack support for more descriptive XFRM error
reporting
- RXRPC: increase SACK table size and move processing into a
per-local endpoint kernel thread, reducing considerably the
required locking
- IEEE 802154: synchronous send frame and extended filtering support,
initial support for scanning available 15.4 networks
- Tun: bump the link speed from 10Mbps to 10Gbps
- Tun/VirtioNet: implement UDP segmentation offload support
Driver API:
- PHY/SFP: improve power level switching between standard level 1 and
the higher power levels
- New API for netdev <-> devlink_port linkage
- PTP: convert existing drivers to new frequency adjustment
implementation
- DSA: add support for rx offloading
- Autoload DSA tagging driver when dynamically changing protocol
- Add new PCP and APPTRUST attributes to Data Center Bridging
- Add configuration support for 800Gbps link speed
- Add devlink port function attribute to enable/disable RoCE and
migratable
- Extend devlink-rate to support strict prioriry and weighted fair
queuing
- Add devlink support to directly reading from region memory
- New device tree helper to fetch MAC address from nvmem
- New big TCP helper to simplify temporary header stripping
New hardware / drivers:
- Ethernet:
- Marvel Octeon CNF95N and CN10KB Ethernet Switches
- Marvel Prestera AC5X Ethernet Switch
- WangXun 10 Gigabit NIC
- Motorcomm yt8521 Gigabit Ethernet
- Microchip ksz9563 Gigabit Ethernet Switch
- Microsoft Azure Network Adapter
- Linux Automation 10Base-T1L adapter
- PHY:
- Aquantia AQR112 and AQR412
- Motorcomm YT8531S
- PTP:
- Orolia ART-CARD
- WiFi:
- MediaTek Wi-Fi 7 (802.11be) devices
- RealTek rtw8821cu, rtw8822bu, rtw8822cu and rtw8723du USB
devices
- Bluetooth:
- Broadcom BCM4377/4378/4387 Bluetooth chipsets
- Realtek RTL8852BE and RTL8723DS
- Cypress.CYW4373A0 WiFi + Bluetooth combo device
Drivers:
- CAN:
- gs_usb: bus error reporting support
- kvaser_usb: listen only and bus error reporting support
- Ethernet NICs:
- Intel (100G):
- extend action skbedit to RX queue mapping
- implement devlink-rate support
- support direct read from memory
- nVidia/Mellanox (mlx5):
- SW steering improvements, increasing rules update rate
- Support for enhanced events compression
- extend H/W offload packet manipulation capabilities
- implement IPSec packet offload mode
- nVidia/Mellanox (mlx4):
- better big TCP support
- Netronome Ethernet NICs (nfp):
- IPsec offload support
- add support for multicast filter
- Broadcom:
- RSS and PTP support improvements
- AMD/SolarFlare:
- netlink extened ack improvements
- add basic flower matches to offload, and related stats
- Virtual NICs:
- ibmvnic: introduce affinity hint support
- small / embedded:
- FreeScale fec: add initial XDP support
- Marvel mv643xx_eth: support MII/GMII/RGMII modes for Kirkwood
- TI am65-cpsw: add suspend/resume support
- Mediatek MT7986: add RX wireless wthernet dispatch support
- Realtek 8169: enable GRO software interrupt coalescing per
default
- Ethernet high-speed switches:
- Microchip (sparx5):
- add support for Sparx5 TC/flower H/W offload via VCAP
- Mellanox mlxsw:
- add 802.1X and MAC Authentication Bypass offload support
- add ip6gre support
- Embedded Ethernet switches:
- Mediatek (mtk_eth_soc):
- improve PCS implementation, add DSA untag support
- enable flow offload support
- Renesas:
- add rswitch R-Car Gen4 gPTP support
- Microchip (lan966x):
- add full XDP support
- add TC H/W offload via VCAP
- enable PTP on bridge interfaces
- Microchip (ksz8):
- add MTU support for KSZ8 series
- Qualcomm 802.11ax WiFi (ath11k):
- support configuring channel dwell time during scan
- MediaTek WiFi (mt76):
- enable Wireless Ethernet Dispatch (WED) offload support
- add ack signal support
- enable coredump support
- remain_on_channel support
- Intel WiFi (iwlwifi):
- enable Wi-Fi 7 Extremely High Throughput (EHT) PHY capabilities
- 320 MHz channels support
- RealTek WiFi (rtw89):
- new dynamic header firmware format support
- wake-over-WLAN support"
* tag 'net-next-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2002 commits)
ipvs: fix type warning in do_div() on 32 bit
net: lan966x: Remove a useless test in lan966x_ptp_add_trap()
net: ipa: add IPA v4.7 support
dt-bindings: net: qcom,ipa: Add SM6350 compatible
bnxt: Use generic HBH removal helper in tx path
IPv6/GRO: generic helper to remove temporary HBH/jumbo header in driver
selftests: forwarding: Add bridge MDB test
selftests: forwarding: Rename bridge_mdb test
bridge: mcast: Support replacement of MDB port group entries
bridge: mcast: Allow user space to specify MDB entry routing protocol
bridge: mcast: Allow user space to add (*, G) with a source list and filter mode
bridge: mcast: Add support for (*, G) with a source list and filter mode
bridge: mcast: Avoid arming group timer when (S, G) corresponds to a source
bridge: mcast: Add a flag for user installed source entries
bridge: mcast: Expose __br_multicast_del_group_src()
bridge: mcast: Expose br_multicast_new_group_src()
bridge: mcast: Add a centralized error path
bridge: mcast: Place netlink policy before validation functions
bridge: mcast: Split (*, G) and (S, G) addition into different functions
bridge: mcast: Do not derive entry type from its filter mode
...
|
|
We assume the correct errno is -EADDRINUSE when sk->sk_prot->get_port()
fails, so some ->get_port() functions return just 1 on failure and the
callers return -EADDRINUSE instead.
However, mptcp_get_port() can return -EINVAL. Let's not ignore the error.
Note the only exception is inet_autobind(), all of whose callers return
-EAGAIN instead.
Fixes: cec37a6e41aa ("mptcp: Handle MP_CAPABLE options for outgoing connections")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This is a simple mechanical transformation done by:
@@
expression E;
@@
- prandom_u32_max
+ get_random_u32_below
(E)
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Darrick J. Wong <djwong@kernel.org> # for xfs
Reviewed-by: SeongJae Park <sj@kernel.org> # for damon
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> # for infiniband
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> # for arm
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # for mmc
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Rather than incurring a division or requesting too many random bytes for
the given range, use the prandom_u32_max() function, which only takes
the minimum required bytes from the RNG and avoids divisions. This was
done mechanically with this coccinelle script:
@basic@
expression E;
type T;
identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32";
typedef u64;
@@
(
- ((T)get_random_u32() % (E))
+ prandom_u32_max(E)
|
- ((T)get_random_u32() & ((E) - 1))
+ prandom_u32_max(E * XXX_MAKE_SURE_E_IS_POW2)
|
- ((u64)(E) * get_random_u32() >> 32)
+ prandom_u32_max(E)
|
- ((T)get_random_u32() & ~PAGE_MASK)
+ prandom_u32_max(PAGE_SIZE)
)
@multi_line@
identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32";
identifier RAND;
expression E;
@@
- RAND = get_random_u32();
... when != RAND
- RAND %= (E);
+ RAND = prandom_u32_max(E);
// Find a potential literal
@literal_mask@
expression LITERAL;
type T;
identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32";
position p;
@@
((T)get_random_u32()@p & (LITERAL))
// Add one to the literal.
@script:python add_one@
literal << literal_mask.LITERAL;
RESULT;
@@
value = None
if literal.startswith('0x'):
value = int(literal, 16)
elif literal[0] in '123456789':
value = int(literal, 10)
if value is None:
print("I don't know how to handle %s" % (literal))
cocci.include_match(False)
elif value == 2**32 - 1 or value == 2**31 - 1 or value == 2**24 - 1 or value == 2**16 - 1 or value == 2**8 - 1:
print("Skipping 0x%x for cleanup elsewhere" % (value))
cocci.include_match(False)
elif value & (value + 1) != 0:
print("Skipping 0x%x because it's not a power of two minus one" % (value))
cocci.include_match(False)
elif literal.startswith('0x'):
coccinelle.RESULT = cocci.make_expr("0x%x" % (value + 1))
else:
coccinelle.RESULT = cocci.make_expr("%d" % (value + 1))
// Replace the literal mask with the calculated result.
@plus_one@
expression literal_mask.LITERAL;
position literal_mask.p;
expression add_one.RESULT;
identifier FUNC;
@@
- (FUNC()@p & (LITERAL))
+ prandom_u32_max(RESULT)
@collapse_ret@
type T;
identifier VAR;
expression E;
@@
{
- T VAR;
- VAR = (E);
- return VAR;
+ return E;
}
@drop_var@
type T;
identifier VAR;
@@
{
- T VAR;
... when != VAR
}
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Yury Norov <yury.norov@gmail.com>
Reviewed-by: KP Singh <kpsingh@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz> # for ext4 and sbitmap
Reviewed-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> # for drbd
Acked-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Heiko Carstens <hca@linux.ibm.com> # for s390
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # for mmc
Acked-by: Darrick J. Wong <djwong@kernel.org> # for xfs
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
We will soon introduce an optional per-netns ehash.
This means we cannot use the global sk->sk_prot->h.hashinfo
to fetch a TCP hashinfo.
Instead, set NULL to sk->sk_prot->h.hashinfo for TCP and get
a proper hashinfo from net->ipv4.tcp_death_row.hashinfo.
Note that we need not use sk->sk_prot->h.hashinfo if DCCP is
disabled.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch adds no functional change and cleans up some functions
that the following patches touch around so that we make them tidy
and easy to review/revert. The changes are
- Keep reverse christmas tree order
- Remove unnecessary init of port in inet_csk_find_open_port()
- Use req_to_sk() once in reqsk_queue_unlink()
- Use sock_net(sk) once in tcp_time_wait() and tcp_v[46]_connect()
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The current bind hashtable (bhash) is hashed by port only.
In the socket bind path, we have to check for bind conflicts by
traversing the specified port's inet_bind_bucket while holding the
hashbucket's spinlock (see inet_csk_get_port() and
inet_csk_bind_conflict()). In instances where there are tons of
sockets hashed to the same port at different addresses, the bind
conflict check is time-intensive and can cause softirq cpu lockups,
as well as stops new tcp connections since __inet_inherit_port()
also contests for the spinlock.
This patch adds a second bind table, bhash2, that hashes by
port and sk->sk_rcv_saddr (ipv4) and sk->sk_v6_rcv_saddr (ipv6).
Searching the bhash2 table leads to significantly faster conflict
resolution and less time holding the hashbucket spinlock.
Please note a few things:
* There can be the case where the a socket's address changes after it
has been bound. There are two cases where this happens:
1) The case where there is a bind() call on INADDR_ANY (ipv4) or
IPV6_ADDR_ANY (ipv6) and then a connect() call. The kernel will
assign the socket an address when it handles the connect()
2) In inet_sk_reselect_saddr(), which is called when rebuilding the
sk header and a few pre-conditions are met (eg rerouting fails).
In these two cases, we need to update the bhash2 table by removing the
entry for the old address, and add a new entry reflecting the updated
address.
* The bhash2 table must have its own lock, even though concurrent
accesses on the same port are protected by the bhash lock. Bhash2 must
have its own lock to protect against cases where sockets on different
ports hash to different bhash hashbuckets but to the same bhash2
hashbucket.
This brings up a few stipulations:
1) When acquiring both the bhash and the bhash2 lock, the bhash2 lock
will always be acquired after the bhash lock and released before the
bhash lock is released.
2) There are no nested bhash2 hashbucket locks. A bhash2 lock is always
acquired+released before another bhash2 lock is acquired+released.
* The bhash table cannot be superseded by the bhash2 table because for
bind requests on INADDR_ANY (ipv4) or IPV6_ADDR_ANY (ipv6), every socket
bound to that port must be checked for a potential conflict. The bhash
table is the only source of port->socket associations.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
While reading sysctl_tcp_syn(ack)?_retries, they can be changed
concurrently. Thus, we need to add READ_ONCE() to their readers.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
While reading sysctl_ip_autobind_reuse, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its reader.
Fixes: 4b01a9674231 ("tcp: bind(0) remove the SO_REUSEADDR restriction when ephemeral ports are exhausted.")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This reverts:
commit d5a42de8bdbe ("net: Add a second bind table hashed by port and address")
commit 538aaf9b2383 ("selftests: Add test for timing a bind request to a port with a populated bhash entry")
Link: https://lore.kernel.org/netdev/20220520001834.2247810-1-kuba@kernel.org/
There are a few things that need to be fixed here:
* Updating bhash2 in cases where the socket's rcv saddr changes
* Adding bhash2 hashbucket locks
Links to syzbot reports:
https://lore.kernel.org/netdev/00000000000022208805e0df247a@google.com/
https://lore.kernel.org/netdev/0000000000003f33bc05dfaf44fe@google.com/
Fixes: d5a42de8bdbe ("net: Add a second bind table hashed by port and address")
Reported-by: syzbot+015d756bbd1f8b5c8f09@syzkaller.appspotmail.com
Reported-by: syzbot+98fd2d1422063b0f8c44@syzkaller.appspotmail.com
Reported-by: syzbot+0a847a982613c6438fba@syzkaller.appspotmail.com
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Link: https://lore.kernel.org/r/20220615193213.2419568-1-joannelkoong@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We currently have one tcp bind table (bhash) which hashes by port
number only. In the socket bind path, we check for bind conflicts by
traversing the specified port's inet_bind2_bucket while holding the
bucket's spinlock (see inet_csk_get_port() and inet_csk_bind_conflict()).
In instances where there are tons of sockets hashed to the same port
at different addresses, checking for a bind conflict is time-intensive
and can cause softirq cpu lockups, as well as stops new tcp connections
since __inet_inherit_port() also contests for the spinlock.
This patch proposes adding a second bind table, bhash2, that hashes by
port and ip address. Searching the bhash2 table leads to significantly
faster conflict resolution and less time holding the spinlock.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
inet_csk_bind_conflict() can access sk->sk_bound_dev_if for
unlocked sockets.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When setting RTO through BPF program, some SYN ACK packets were unaffected
and continued to use TCP_TIMEOUT_INIT constant. This patch adds timeout
option to struct request_sock. Option is initialized with TCP_TIMEOUT_INIT
and is reassigned through BPF using tcp_timeout_init call. SYN ACK
retransmits now use newly added timeout option.
Signed-off-by: Akhmat Karakotov <hmukos@yandex-team.ru>
Acked-by: Martin KaFai Lau <kafai@fb.com>
v2:
- Add timeout option to struct request_sock. Do not call
tcp_timeout_init on every syn ack retransmit.
v3:
- Use unsigned long for min. Bound tcp_timeout_init to TCP_RTO_MAX.
v4:
- Refactor duplicate code by adding reqsk_timeout function.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add the SO_TXREHASH socket option to control hash rethink behavior per socket.
When default mode is set, sockets disable rehash at initialization and use
sysctl option when entering listen state. setsockopt() overrides default
behavior.
Signed-off-by: Akhmat Karakotov <hmukos@yandex-team.ru>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
No conflicts.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since commit 4e1beecc3b58 ("net/sock: Add kernel config
SOCK_RX_QUEUE_MAPPING"),
sk_rx_queue_mapping access is guarded by CONFIG_SOCK_RX_QUEUE_MAPPING.
Fixes: 54b92e841937 ("tcp: Migrate TCP_ESTABLISHED/TCP_SYN_RECV sockets in accept queues.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Tariq Toukan <tariqt@nvidia.com>
Acked-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The commit 1295e2cf3065 ("inet: minor optimization for backlog setting in
listen(2)") added change so that sk_max_ack_backlog is initialised earlier
in inet_dccp_listen() and inet_listen(). Since then, we no longer use
backlog in inet_csk_listen_start(), so let's remove it.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Acked-by: Yafang Shao <laoar.shao@gmail.com>
Reviewed-by: Richard Sailer <richard_siegfried@systemli.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use of percpu_counter structure to track count of orphaned
sockets is causing problems on modern hosts with 256 cpus
or more.
Stefan Bach reported a serious spinlock contention in real workloads,
that I was able to reproduce with a netfilter rule dropping
incoming FIN packets.
53.56% server [kernel.kallsyms] [k] queued_spin_lock_slowpath
|
---queued_spin_lock_slowpath
|
--53.51%--_raw_spin_lock_irqsave
|
--53.51%--__percpu_counter_sum
tcp_check_oom
|
|--39.03%--__tcp_close
| tcp_close
| inet_release
| inet6_release
| sock_close
| __fput
| ____fput
| task_work_run
| exit_to_usermode_loop
| do_syscall_64
| entry_SYSCALL_64_after_hwframe
| __GI___libc_close
|
--14.48%--tcp_out_of_resources
tcp_write_timeout
tcp_retransmit_timer
tcp_write_timer_handler
tcp_write_timer
call_timer_fn
expire_timers
__run_timers
run_timer_softirq
__softirqentry_text_start
As explained in commit cf86a086a180 ("net/dst: use a smaller percpu_counter
batch for dst entries accounting"), default batch size is too big
for the default value of tcp_max_orphans (262144).
But even if we reduce batch sizes, there would still be cases
where the estimated count of orphans is beyond the limit,
and where tcp_too_many_orphans() has to call the expensive
percpu_counter_sum_positive().
One solution is to use plain per-cpu counters, and have
a timer to periodically refresh this cache.
Updating this cache every 100ms seems about right, tcp pressure
state is not radically changing over shorter periods.
percpu_counter was nice 15 years ago while hosts had less
than 16 cpus, not anymore by current standards.
v2: Fix the build issue for CONFIG_CRYPTO_DEV_CHELSIO_TLS=m,
reported by kernel test robot <lkp@intel.com>
Remove unused socket argument from tcp_too_many_orphans()
Fixes: dd24c00191d5 ("net: Use a percpu_counter for orphan_count")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Stefan Bach <sfb@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add gfp_t mask as an input parameter to mem_cgroup_charge_skmem(),
to give more control to the networking stack and enable it to change
memcg charging behavior. In the future, the networking stack may decide
to avoid oom-kills when fallbacks are more appropriate.
One behavior change in mem_cgroup_charge_skmem() by this patch is to
avoid force charging by default and let the caller decide when and if
force charging is needed through the presence or absence of
__GFP_NOFAIL.
Signed-off-by: Wei Wang <weiwan@google.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This commit adds two stats for the socket migration feature to evaluate the
effectiveness: LINUX_MIB_TCPMIGRATEREQ(SUCCESS|FAILURE).
If the migration fails because of the own_req race in receiving ACK and
sending SYN+ACK paths, we do not increment the failure stat. Then another
CPU is responsible for the req.
Link: https://lore.kernel.org/bpf/CAK6E8=cgFKuGecTzSCSQ8z3YJ_163C0uwO9yRvfDSE7vOe9mJA@mail.gmail.com/
Suggested-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Acked-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch also changes the code to call reuseport_migrate_sock() and
inet_reqsk_clone(), but unlike the other cases, we do not call
inet_reqsk_clone() right after reuseport_migrate_sock().
Currently, in the receive path for TCP_NEW_SYN_RECV sockets, its listener
has three kinds of refcnt:
(A) for listener itself
(B) carried by reuqest_sock
(C) sock_hold() in tcp_v[46]_rcv()
While processing the req, (A) may disappear by close(listener). Also, (B)
can disappear by accept(listener) once we put the req into the accept
queue. So, we have to hold another refcnt (C) for the listener to prevent
use-after-free.
For socket migration, we call reuseport_migrate_sock() to select a listener
with (A) and to increment the new listener's refcnt in tcp_v[46]_rcv().
This refcnt corresponds to (C) and is cleaned up later in tcp_v[46]_rcv().
Thus we have to take another refcnt (B) for the newly cloned request_sock.
In inet_csk_complete_hashdance(), we hold the count (B), clone the req, and
try to put the new req into the accept queue. By migrating req after
winning the "own_req" race, we can avoid such a worst situation:
CPU 1 looks up req1
CPU 2 looks up req1, unhashes it, then CPU 1 loses the race
CPU 3 looks up req2, unhashes it, then CPU 2 loses the race
...
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20210612123224.12525-8-kuniyu@amazon.co.jp
|
|
As with the preceding patch, this patch changes reqsk_timer_handler() to
call reuseport_migrate_sock() and inet_reqsk_clone() to migrate in-flight
requests at retransmitting SYN+ACKs. If we can select a new listener and
clone the request, we resume setting the SYN+ACK timer for the new req. If
we can set the timer, we call inet_ehash_insert() to unhash the old req and
put the new req into ehash.
The noteworthy point here is that by unhashing the old req, another CPU
processing it may lose the "own_req" race in tcp_v[46]_syn_recv_sock() and
drop the final ACK packet. However, the new timer will recover this
situation.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20210612123224.12525-7-kuniyu@amazon.co.jp
|
|
When we call close() or shutdown() for listening sockets, each child socket
in the accept queue are freed at inet_csk_listen_stop(). If we can get a
new listener by reuseport_migrate_sock() and clone the request by
inet_reqsk_clone(), we try to add it into the new listener's accept queue
by inet_csk_reqsk_queue_add(). If it fails, we have to call __reqsk_free()
to call sock_put() for its listener and free the cloned request.
After putting the full socket into ehash, tcp_v[46]_syn_recv_sock() sets
NULL to ireq_opt/pktopts in struct inet_request_sock, but ipv6_opt can be
non-NULL. So, we have to set NULL to ipv6_opt of the old request to avoid
double free.
Note that we do not update req->rsk_listener and instead clone the req to
migrate because another path may reference the original request. If we
protected it by RCU, we would need to add rcu_read_lock() in many places.
Suggested-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/netdev/20201209030903.hhow5r53l6fmozjn@kafai-mbp.dhcp.thefacebook.com/
Link: https://lore.kernel.org/bpf/20210612123224.12525-6-kuniyu@amazon.co.jp
|
|
When we close a listening socket, to migrate its connections to another
listener in the same reuseport group, we have to handle two kinds of child
sockets. One is that a listening socket has a reference to, and the other
is not.
The former is the TCP_ESTABLISHED/TCP_SYN_RECV sockets, and they are in the
accept queue of their listening socket. So we can pop them out and push
them into another listener's queue at close() or shutdown() syscalls. On
the other hand, the latter, the TCP_NEW_SYN_RECV socket is during the
three-way handshake and not in the accept queue. Thus, we cannot access
such sockets at close() or shutdown() syscalls. Accordingly, we have to
migrate immature sockets after their listening socket has been closed.
Currently, if their listening socket has been closed, TCP_NEW_SYN_RECV
sockets are freed at receiving the final ACK or retransmitting SYN+ACKs. At
that time, if we could select a new listener from the same reuseport group,
no connection would be aborted. However, we cannot do that because
reuseport_detach_sock() sets NULL to sk_reuseport_cb and forbids access to
the reuseport group from closed sockets.
This patch allows TCP_CLOSE sockets to remain in the reuseport group and
access it while any child socket references them. The point is that
reuseport_detach_sock() was called twice from inet_unhash() and
sk_destruct(). This patch replaces the first reuseport_detach_sock() with
reuseport_stop_listen_sock(), which checks if the reuseport group is
capable of migration. If capable, it decrements num_socks, moves the socket
backwards in socks[] and increments num_closed_socks. When all connections
are migrated, sk_destruct() calls reuseport_detach_sock() to remove the
socket from socks[], decrement num_closed_socks, and set NULL to
sk_reuseport_cb.
By this change, closed or shutdowned sockets can keep sk_reuseport_cb.
Consequently, calling listen() after shutdown() can cause EADDRINUSE or
EBUSY in inet_csk_bind_conflict() or reuseport_add_sock() which expects
such sockets not to have the reuseport group. Therefore, this patch also
loosens such validation rules so that a socket can listen again if it has a
reuseport group with num_closed_socks more than 0.
When such sockets listen again, we handle them in reuseport_resurrect(). If
there is an existing reuseport group (reuseport_add_sock() path), we move
the socket from the old group to the new one and free the old one if
necessary. If there is no existing group (reuseport_alloc() path), we
allocate a new reuseport group, detach sk from the old one, and free it if
necessary, not to break the current shutdown behaviour:
- we cannot carry over the eBPF prog of shutdowned sockets
- we cannot attach/detach an eBPF prog to/from listening sockets via
shutdowned sockets
Note that when the number of sockets gets over U16_MAX, we try to detach a
closed socket randomly to make room for the new listening socket in
reuseport_grow().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/bpf/20210612123224.12525-4-kuniyu@amazon.co.jp
|
|
Currently tcp_check_req can be called with obsolete req socket for which big
socket have been already created (because of CPU race or early demux
assigning req socket to multiple packets in gro batch).
Commit e0f9759f530bf789e984 ("tcp: try to keep packet if SYN_RCV race
is lost") added retry in case when tcp_check_req is called for PSH|ACK packet.
But if client sends RST+ACK immediatly after connection being
established (it is performing healthcheck, for example) retry does not
occur. In that case tcp_check_req tries to close req socket,
leaving big socket active.
Fixes: e0f9759f530 ("tcp: try to keep packet if SYN_RCV race is lost")
Signed-off-by: Alexander Ovechkin <ovov@yandex-team.ru>
Reported-by: Oleg Senin <olegsenin@yandex-team.ru>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The TCP session does not terminate with TCP_USER_TIMEOUT when data
remain untransmitted due to zero window.
The number of unanswered zero-window probes (tcp_probes_out) is
reset to zero with incoming acks irrespective of the window size,
as described in tcp_probe_timer():
RFC 1122 4.2.2.17 requires the sender to stay open indefinitely
as long as the receiver continues to respond probes. We support
this by default and reset icsk_probes_out with incoming ACKs.
This counter, however, is the wrong one to be used in calculating the
duration that the window remains closed and data remain untransmitted.
Thanks to Jonathan Maxwell <jmaxwell37@gmail.com> for diagnosing the
actual issue.
In this patch a new timestamp is introduced for the socket in order to
track the elapsed time for the zero-window probes that have not been
answered with any non-zero window ack.
Fixes: 9721e709fa68 ("tcp: simplify window probe aborting on USER_TIMEOUT")
Reported-by: William McCall <william.mccall@gmail.com>
Co-developed-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Enke Chen <enchen@paloaltonetworks.com>
Reviewed-by: Yuchung Cheng <ycheng@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20210115223058.GA39267@localhost.localdomain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull selinux updates from Paul Moore:
"While we have a small number of SELinux patches for v5.11, there are a
few changes worth highlighting:
- Change the LSM network hooks to pass flowi_common structs instead
of the parent flowi struct as the LSMs do not currently need the
full flowi struct and they do not have enough information to use it
safely (missing information on the address family).
This patch was discussed both with Herbert Xu (representing team
netdev) and James Morris (representing team
LSMs-other-than-SELinux).
- Fix how we handle errors in inode_doinit_with_dentry() so that we
attempt to properly label the inode on following lookups instead of
continuing to treat it as unlabeled.
- Tweak the kernel logic around allowx, auditallowx, and dontauditx
SELinux policy statements such that the auditx/dontauditx are
effective even without the allowx statement.
Everything passes our test suite"
* tag 'selinux-pr-20201214' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
lsm,selinux: pass flowi_common instead of flowi to the LSM hooks
selinux: Fix fall-through warnings for Clang
selinux: drop super_block backpointer from superblock_security_struct
selinux: fix inode_doinit_with_dentry() LABEL_INVALID error handling
selinux: allow dontauditx and auditallowx rules to take effect without allowx
selinux: fix error initialization in inode_doinit_with_dentry()
|
|
When the TCP stack is in SYN flood mode, the server child socket is
created from the SYN cookie received in a TCP packet with the ACK flag
set.
The child socket is created when the server receives the first TCP
packet with a valid SYN cookie from the client. Usually, this packet
corresponds to the final step of the TCP 3-way handshake, the ACK
packet. But is also possible to receive a valid SYN cookie from the
first TCP data packet sent by the client, and thus create a child socket
from that SYN cookie.
Since a client socket is ready to send data as soon as it receives the
SYN+ACK packet from the server, the client can send the ACK packet (sent
by the TCP stack code), and the first data packet (sent by the userspace
program) almost at the same time, and thus the server will equally
receive the two TCP packets with valid SYN cookies almost at the same
instant.
When such event happens, the TCP stack code has a race condition that
occurs between the momement a lookup is done to the established
connections hashtable to check for the existence of a connection for the
same client, and the moment that the child socket is added to the
established connections hashtable. As a consequence, this race condition
can lead to a situation where we add two child sockets to the
established connections hashtable and deliver two sockets to the
userspace program to the same client.
This patch fixes the race condition by checking if an existing child
socket exists for the same client when we are adding the second child
socket to the established connections socket. If an existing child
socket exists, we drop the packet and discard the second child socket
to the same client.
Signed-off-by: Ricardo Dias <rdias@singlestore.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20201120111133.GA67501@rdias-suse-pc.lan
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As pointed out by Herbert in a recent related patch, the LSM hooks do
not have the necessary address family information to use the flowi
struct safely. As none of the LSMs currently use any of the protocol
specific flowi information, replace the flowi pointers with pointers
to the address family independent flowi_common struct.
Reported-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: James Morris <jamorris@linux.microsoft.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
TCP has been using it to work around the possibility of tcp_delack_timer()
finding the socket owned by user.
After commit 6f458dfb4092 ("tcp: improve latencies of timer triggered events")
we added TCP_DELACK_TIMER_DEFERRED atomic bit for more immediate recovery,
so we can get rid of icsk_ack.blocked
This frees space that following patch will reuse.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Refactor the fastreuse update code in inet_csk_get_port into a small
helper function that can be called from other places.
Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Tim Froidcoeur <tim.froidcoeur@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Handle the few cases that need special treatment in-line using
in_compat_syscall(). This also removes all the now unused
compat_{get,set}sockopt methods.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit 0c3d79bce48034018e840468ac5a642894a521a3 ("tcp: reduce SYN-ACK
retrans for TCP_DEFER_ACCEPT") introduces syn_ack_recalc() which decides
if a minisock is held and a SYN+ACK is retransmitted or not.
If rskq_defer_accept is not zero in syn_ack_recalc(), max_retries always
has the same value because max_retries is overwritten by rskq_defer_accept
in reqsk_timer_handler().
This commit adds three changes:
- remove redundant non-zero check for rskq_defer_accept in
reqsk_timer_handler().
- remove max_retries from the arguments of syn_ack_recalc() and use
rskq_defer_accept instead.
- rename thresh to max_syn_ack_retries for readability.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Reviewed-by: Benjamin Herrenschmidt <benh@amazon.com>
CC: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Clearing the 'inet_num' field is necessary and safe if and
only if the socket is not bound. The MPTCP protocol calls
the destroy helper on bound sockets, as tcp_v{4,6}_syn_recv_sock
completed successfully.
Move the clearing of such field out of the common code, otherwise
the MPTCP MP_JOIN error path will find the wrong 'inet_num' value
on socket disposal, __inet_put_port() will acquire the wrong lock
and bind_node removal could race with other modifiers possibly
corrupting the bind hash table.
Reported-and-tested-by: Christoph Paasch <cpaasch@apple.com>
Fixes: 729cd6436f35 ("mptcp: cope better with MP_JOIN failure")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The MSCC bug fix in 'net' had to be slightly adjusted because the
register accesses are done slightly differently in net-next.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The commit 637bc8bbe6c0 ("inet: reset tb->fastreuseport when adding a reuseport sk")
added a bind-address cache in tb->fast*. The tb->fast* caches the address
of a sk which has successfully been binded with SO_REUSEPORT ON. The idea
is to avoid the expensive conflict search in inet_csk_bind_conflict().
There is an issue with wildcard matching where sk_reuseport_match() should
have returned false but it is currently returning true. It ends up
hiding bind conflict. For example,
bind("[::1]:443"); /* without SO_REUSEPORT. Succeed. */
bind("[::2]:443"); /* with SO_REUSEPORT. Succeed. */
bind("[::]:443"); /* with SO_REUSEPORT. Still Succeed where it shouldn't */
The last bind("[::]:443") with SO_REUSEPORT on should have failed because
it should have a conflict with the very first bind("[::1]:443") which
has SO_REUSEPORT off. However, the address "[::2]" is cached in
tb->fast* in the second bind. In the last bind, the sk_reuseport_match()
returns true because the binding sk's wildcard addr "[::]" matches with
the "[::2]" cached in tb->fast*.
The correct bind conflict is reported by removing the second
bind such that tb->fast* cache is not involved and forces the
bind("[::]:443") to go through the inet_csk_bind_conflict():
bind("[::1]:443"); /* without SO_REUSEPORT. Succeed. */
bind("[::]:443"); /* with SO_REUSEPORT. -EADDRINUSE */
The expected behavior for sk_reuseport_match() is, it should only allow
the "cached" tb->fast* address to be used as a wildcard match but not
the address of the binding sk. To do that, the current
"bool match_wildcard" arg is split into
"bool match_sk1_wildcard" and "bool match_sk2_wildcard".
This change only affects the sk_reuseport_match() which is only
used by inet_csk (e.g. TCP).
The other use cases are calling inet_rcv_saddr_equal() and
this patch makes it pass the same "match_wildcard" arg twice to
the "ipv[46]_rcv_saddr_equal(..., match_wildcard, match_wildcard)".
Cc: Josef Bacik <jbacik@fb.com>
Fixes: 637bc8bbe6c0 ("inet: reset tb->fastreuseport when adding a reuseport sk")
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Move the steps to prepare an inet_connection_sock for
forced disposal inside a separate helper. No functional
changes inteded, this will just simplify the next patch.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Christoph Paasch <cpaasch@apple.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Minor overlapping changes, nothing serious.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
SO_REUSEPORT per EUID.
If there is no TCP_LISTEN socket on a ephemeral port, we can bind multiple
sockets having SO_REUSEADDR to the same port. Then if all sockets bound to
the port have also SO_REUSEPORT enabled and have the same EUID, all of them
can be listened. This is not safe.
Let's say, an application has root privilege and binds sockets to an
ephemeral port with both of SO_REUSEADDR and SO_REUSEPORT. When none of
sockets is not listened yet, a malicious user can use sudo, exhaust
ephemeral ports, and bind sockets to the same ephemeral port, so he or she
can call listen and steal the port.
To prevent this issue, we must not bind more than one sockets that have the
same EUID and both of SO_REUSEADDR and SO_REUSEPORT.
On the other hand, if the sockets have different EUIDs, the issue above does
not occur. After sockets with different EUIDs are bound to the same port and
one of them is listened, no more socket can be listened. This is because the
condition below is evaluated true and listen() for the second socket fails.
} else if (!reuseport_ok ||
!reuseport || !sk2->sk_reuseport ||
rcu_access_pointer(sk->sk_reuseport_cb) ||
(sk2->sk_state != TCP_TIME_WAIT &&
!uid_eq(uid, sock_i_uid(sk2)))) {
if (inet_rcv_saddr_equal(sk, sk2, true))
break;
}
Therefore, on the same port, we cannot do listen() for multiple sockets with
different EUIDs and any other listen syscalls fail, so the problem does not
happen. In this case, we can still call connect() for other sockets that
cannot be listened, so we have to succeed to call bind() in order to fully
utilize 4-tuples.
Summarizing the above, we should be able to bind only one socket having
SO_REUSEADDR and SO_REUSEPORT per EUID.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
exhausted.
Commit aacd9289af8b82f5fb01bcdd53d0e3406d1333c7 ("tcp: bind() use stronger
condition for bind_conflict") introduced a restriction to forbid to bind
SO_REUSEADDR enabled sockets to the same (addr, port) tuple in order to
assign ports dispersedly so that we can connect to the same remote host.
The change results in accelerating port depletion so that we fail to bind
sockets to the same local port even if we want to connect to the different
remote hosts.
You can reproduce this issue by following instructions below.
1. # sysctl -w net.ipv4.ip_local_port_range="32768 32768"
2. set SO_REUSEADDR to two sockets.
3. bind two sockets to (localhost, 0) and the latter fails.
Therefore, when ephemeral ports are exhausted, bind(0) should fallback to
the legacy behaviour to enable the SO_REUSEADDR option and make it possible
to connect to different remote (addr, port) tuples.
This patch allows us to bind SO_REUSEADDR enabled sockets to the same
(addr, port) only when net.ipv4.ip_autobind_reuse is set 1 and all
ephemeral ports are exhausted. This also allows connect() and listen() to
share ports in the following way and may break some applications. So the
ip_autobind_reuse is 0 by default and disables the feature.
1. setsockopt(sk1, SO_REUSEADDR)
2. setsockopt(sk2, SO_REUSEADDR)
3. bind(sk1, saddr, 0)
4. bind(sk2, saddr, 0)
5. connect(sk1, daddr)
6. listen(sk2)
If it is set 1, we can fully utilize the 4-tuples, but we should use
IP_BIND_ADDRESS_NO_PORT for bind()+connect() as possible.
The notable thing is that if all sockets bound to the same port have
both SO_REUSEADDR and SO_REUSEPORT enabled, we can bind sockets to an
ephemeral port and also do listen().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When we get an ephemeral port, the relax is false, so the SO_REUSEADDR
conditions may be evaluated twice. We do not need to check the conditions
again.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Locking newsk while still holding the listener lock triggered
a lockdep splat [1]
We can simply move the memcg code after we release the listener lock,
as this can also help if multiple threads are sharing a common listener.
Also fix a typo while reading socket sk_rmem_alloc.
[1]
WARNING: possible recursive locking detected
5.6.0-rc3-syzkaller #0 Not tainted
--------------------------------------------
syz-executor598/9524 is trying to acquire lock:
ffff88808b5b8b90 (sk_lock-AF_INET6){+.+.}, at: lock_sock include/net/sock.h:1541 [inline]
ffff88808b5b8b90 (sk_lock-AF_INET6){+.+.}, at: inet_csk_accept+0x69f/0xd30 net/ipv4/inet_connection_sock.c:492
but task is already holding lock:
ffff88808b5b9590 (sk_lock-AF_INET6){+.+.}, at: lock_sock include/net/sock.h:1541 [inline]
ffff88808b5b9590 (sk_lock-AF_INET6){+.+.}, at: inet_csk_accept+0x8d/0xd30 net/ipv4/inet_connection_sock.c:445
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(sk_lock-AF_INET6);
lock(sk_lock-AF_INET6);
*** DEADLOCK ***
May be due to missing lock nesting notation
1 lock held by syz-executor598/9524:
#0: ffff88808b5b9590 (sk_lock-AF_INET6){+.+.}, at: lock_sock include/net/sock.h:1541 [inline]
#0: ffff88808b5b9590 (sk_lock-AF_INET6){+.+.}, at: inet_csk_accept+0x8d/0xd30 net/ipv4/inet_connection_sock.c:445
stack backtrace:
CPU: 0 PID: 9524 Comm: syz-executor598 Not tainted 5.6.0-rc3-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x188/0x20d lib/dump_stack.c:118
print_deadlock_bug kernel/locking/lockdep.c:2370 [inline]
check_deadlock kernel/locking/lockdep.c:2411 [inline]
validate_chain kernel/locking/lockdep.c:2954 [inline]
__lock_acquire.cold+0x114/0x288 kernel/locking/lockdep.c:3954
lock_acquire+0x197/0x420 kernel/locking/lockdep.c:4484
lock_sock_nested+0xc5/0x110 net/core/sock.c:2947
lock_sock include/net/sock.h:1541 [inline]
inet_csk_accept+0x69f/0xd30 net/ipv4/inet_connection_sock.c:492
inet_accept+0xe9/0x7c0 net/ipv4/af_inet.c:734
__sys_accept4_file+0x3ac/0x5b0 net/socket.c:1758
__sys_accept4+0x53/0x90 net/socket.c:1809
__do_sys_accept4 net/socket.c:1821 [inline]
__se_sys_accept4 net/socket.c:1818 [inline]
__x64_sys_accept4+0x93/0xf0 net/socket.c:1818
do_syscall_64+0xf6/0x790 arch/x86/entry/common.c:294
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x4445c9
Code: e8 0c 0d 03 00 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 eb 08 fc ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007ffc35b37608 EFLAGS: 00000246 ORIG_RAX: 0000000000000120
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00000000004445c9
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000003
RBP: 0000000000000000 R08: 0000000000306777 R09: 0000000000306777
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 00000000004053d0 R14: 0000000000000000 R15: 0000000000000000
Fixes: d752a4986532 ("net: memcg: late association of sock to memcg")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Shakeel Butt <shakeelb@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If a TCP socket is allocated in IRQ context or cloned from unassociated
(i.e. not associated to a memcg) in IRQ context then it will remain
unassociated for its whole life. Almost half of the TCPs created on the
system are created in IRQ context, so, memory used by such sockets will
not be accounted by the memcg.
This issue is more widespread in cgroup v1 where network memory
accounting is opt-in but it can happen in cgroup v2 if the source socket
for the cloning was created in root memcg.
To fix the issue, just do the association of the sockets at the accept()
time in the process context and then force charge the memory buffer
already used and reserved by the socket.
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
After commit 079096f103fa ("tcp/dccp: install syn_recv requests into ehash table")
the macro isn't used anymore. remove it.
Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
Cc: netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
|
Jason Xing
Jakub Kicinski
Kevin Yang
Jakub Sitnicki
Paolo Abeni
Kuniyuki Iwashima
Linus Torvalds
Jason A. Donenfeld
Joanne Koong
Eric Dumazet
Akhmat Karakotov
Kuniyuki Iwashima
Wei Wang
Alexander Ovechkin
Enke Chen
Ricardo Dias
Paul Moore
Tim Froidcoeur
Christoph Hellwig
David S. Miller
Martin KaFai Lau
Shakeel Butt
Alex Shi
