aboutsummaryrefslogtreecommitdiff
path: root/net/openvswitch
AgeCommit message (Collapse)AuthorFilesLines
2020-07-24net: openvswitch: fixes potential deadlock in dp cleanup codeGravatar Eelco Chaudron 2-14/+13
The previous patch introduced a deadlock, this patch fixes it by making sure the work is canceled without holding the global ovs lock. This is done by moving the reorder processing one layer up to the netns level. Fixes: eac87c413bf9 ("net: openvswitch: reorder masks array based on usage") Reported-by: syzbot+2c4ff3614695f75ce26c@syzkaller.appspotmail.com Reported-by: syzbot+bad6507e5db05017b008@syzkaller.appspotmail.com Reviewed-by: Paolo <pabeni@redhat.com> Signed-off-by: Eelco Chaudron <echaudro@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-17net: openvswitch: reorder masks array based on usageGravatar Eelco Chaudron 4-7/+207
This patch reorders the masks array every 4 seconds based on their usage count. This greatly reduces the masks per packet hit, and hence the overall performance. Especially in the OVS/OVN case for OpenShift. Here are some results from the OVS/OVN OpenShift test, which use 8 pods, each pod having 512 uperf connections, each connection sends a 64-byte request and gets a 1024-byte response (TCP). All uperf clients are on 1 worker node while all uperf servers are on the other worker node. Kernel without this patch : 7.71 Gbps Kernel with this patch applied: 14.52 Gbps We also run some tests to verify the rebalance activity does not lower the flow insertion rate, which does not. Signed-off-by: Eelco Chaudron <echaudro@redhat.com> Tested-by: Andrew Theurer <atheurer@redhat.com> Reviewed-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-13net: openvswitch: kerneldoc fixesGravatar Andrew Lunn 2-4/+5
Simple fixes which require no deep knowledge of the code. Cc: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-24openvswitch: take into account de-fragmentation/gso_size in ↵Gravatar Lorenzo Bianconi 1-2/+7
execute_check_pkt_len ovs connection tracking module performs de-fragmentation on incoming fragmented traffic. Take info account if traffic has been de-fragmented in execute_check_pkt_len action otherwise we will perform the wrong nested action considering the original packet size. This issue typically occurs if ovs-vswitchd adds a rule in the pipeline that requires connection tracking (e.g. OVN stateful ACLs) before execute_check_pkt_len action. Moreover take into account GSO fragment size for GSO packet in execute_check_pkt_len routine Fixes: 4d5ec89fc8d14 ("net: openvswitch: Add a new action check_pkt_len") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-14treewide: replace '---help---' in Kconfig files with 'help'Gravatar Masahiro Yamada 1-4/+4
Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over '---help---'"), the number of '---help---' has been gradually decreasing, but there are still more than 2400 instances. This commit finishes the conversion. While I touched the lines, I also fixed the indentation. There are a variety of indentation styles found. a) 4 spaces + '---help---' b) 7 spaces + '---help---' c) 8 spaces + '---help---' d) 1 space + 1 tab + '---help---' e) 1 tab + '---help---' (correct indentation) f) 1 tab + 1 space + '---help---' g) 1 tab + 2 spaces + '---help---' In order to convert all of them to 1 tab + 'help', I ran the following commend: $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/' Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-04-25net: openvswitch: use div_u64() for 64-by-32 divisionsGravatar Tonghao Zhang 1-1/+1
Compile the kernel for arm 32 platform, the build warning found. To fix that, should use div_u64() for divisions. | net/openvswitch/meter.c:396: undefined reference to `__udivdi3' [add more commit msg, change reported tag, and use div_u64 instead of do_div by Tonghao] Fixes: e57358873bb5d6ca ("net: openvswitch: use u64 for meter bucket") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com> Tested-by: Tonghao Zhang <xiangxia.m.yue@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-25net: openvswitch: suitable access to the dp_metersGravatar Tonghao Zhang 1-3/+3
To fix the following sparse warning: | net/openvswitch/meter.c:109:38: sparse: sparse: incorrect type | in assignment (different address spaces) ... | net/openvswitch/meter.c:720:45: sparse: sparse: incorrect type | in argument 1 (different address spaces) ... Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netGravatar David S. Miller 2-2/+5
Simple overlapping changes to linux/vermagic.h Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-23net: openvswitch: use u64 for meter bucketGravatar Tonghao Zhang 2-2/+2
When setting the meter rate to 4+Gbps, there is an overflow, the meters don't work as expected. Cc: Pravin B Shelar <pshelar@ovn.org> Cc: Andy Zhou <azhou@ovn.org> Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-23net: openvswitch: make EINVAL return value more obviousGravatar Tonghao Zhang 1-3/+2
Cc: Pravin B Shelar <pshelar@ovn.org> Cc: Andy Zhou <azhou@ovn.org> Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-23net: openvswitch: remove the unnecessary checkGravatar Tonghao Zhang 1-5/+4
Before invoking the ovs_meter_cmd_reply_stats, "meter" was checked, so don't check it agin in that function. Cc: Pravin B Shelar <pshelar@ovn.org> Cc: Andy Zhou <azhou@ovn.org> Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-23net: openvswitch: set max limitation to metersGravatar Tonghao Zhang 2-10/+49
Don't allow user to create meter unlimitedly, which may cause to consume a large amount of kernel memory. The max number supported is decided by physical memory and 20K meters as default. Cc: Pravin B Shelar <pshelar@ovn.org> Cc: Andy Zhou <azhou@ovn.org> Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-23net: openvswitch: expand the meters supported numberGravatar Tonghao Zhang 3-63/+195
In kernel datapath of Open vSwitch, there are only 1024 buckets of meter in one datapath. If installing more than 1024 (e.g. 8192) meters, it may lead to the performance drop. But in some case, for example, Open vSwitch used as edge gateway, there should be 20K at least, where meters used for IP address bandwidth limitation. [Open vSwitch userspace datapath has this issue too.] For more scalable meter, this patch use meter array instead of hash tables, and expand/shrink the array when necessary. So we can install more meters than before in the datapath. Introducing the struct *dp_meter_instance, it's easy to expand meter though changing the *ti point in the struct *dp_meter_table. Cc: Pravin B Shelar <pshelar@ovn.org> Cc: Andy Zhou <azhou@ovn.org> Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-20net: openvswitch: ovs_ct_exit to be done under ovs_lockGravatar Tonghao Zhang 2-2/+5
syzbot wrote: | ============================= | WARNING: suspicious RCU usage | 5.7.0-rc1+ #45 Not tainted | ----------------------------- | net/openvswitch/conntrack.c:1898 RCU-list traversed in non-reader section!! | | other info that might help us debug this: | rcu_scheduler_active = 2, debug_locks = 1 | ... | | stack backtrace: | Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-0-ga698c8995f-prebuilt.qemu.org 04/01/2014 | Workqueue: netns cleanup_net | Call Trace: | ... | ovs_ct_exit | ovs_exit_net | ops_exit_list.isra.7 | cleanup_net | process_one_work | worker_thread To avoid that warning, invoke the ovs_ct_exit under ovs_lock and add lockdep_ovsl_is_held as optional lockdep expression. Link: https://lore.kernel.org/lkml/000000000000e642a905a0cbee6e@google.com Fixes: 11efd5cb04a1 ("openvswitch: Support conntrack zone limit") Cc: Pravin B Shelar <pshelar@ovn.org> Cc: Yi-Hung Wei <yihung.wei@gmail.com> Reported-by: syzbot+7ef50afd3a211f879112@syzkaller.appspotmail.com Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-02net: openvswitch: use hlist_for_each_entry_rcu instead of hlist_for_each_entryGravatar Tonghao Zhang 1-4/+6
The struct sw_flow is protected by RCU, when traversing them, use hlist_for_each_entry_rcu. Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com> Tested-by: Greg Rose <gvrose8192@gmail.com> Reviewed-by: Greg Rose <gvrose8192@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-29net: Fix typo of SKB_SGO_CB_OFFSETGravatar Cambda Zhu 1-1/+1
The SKB_SGO_CB_OFFSET should be SKB_GSO_CB_OFFSET which means the offset of the GSO in skb cb. This patch fixes the typo. Fixes: 9207f9d45b0a ("net: preserve IP control block during GSO segmentation") Signed-off-by: Cambda Zhu <cambda@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netGravatar David S. Miller 1-0/+1
Minor overlapping changes, nothing serious. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-03openvswitch: add missing attribute validation for hashGravatar Jakub Kicinski 1-0/+1
Add missing attribute validation for OVS_PACKET_ATTR_HASH to the netlink policy. Fixes: bd1903b7c459 ("net: openvswitch: add hash info to upcall") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Greg Rose <gvrose8192@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netGravatar David S. Miller 5-15/+24
Conflict resolution of ice_virtchnl_pf.c based upon work by Stephen Rothwell. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-20openvswitch: Distribute switch variables for initializationGravatar Kees Cook 1-8/+10
Variables declared in a switch statement before any case statements cannot be automatically initialized with compiler instrumentation (as they are not part of any execution flow). With GCC's proposed automatic stack variable initialization feature, this triggers a warning (and they don't get initialized). Clang's automatic stack variable initialization (via CONFIG_INIT_STACK_ALL=y) doesn't throw a warning, but it also doesn't initialize such variables[1]. Note that these warnings (or silent skipping) happen before the dead-store elimination optimization phase, so even when the automatic initializations are later elided in favor of direct initializations, the warnings remain. To avoid these problems, move such variables into the "case" where they're used or lift them up into the main function body. net/openvswitch/flow_netlink.c: In function ‘validate_set’: net/openvswitch/flow_netlink.c:2711:29: warning: statement will never be executed [-Wswitch-unreachable] 2711 | const struct ovs_key_ipv4 *ipv4_key; | ^~~~~~~~ [1] https://bugs.llvm.org/show_bug.cgi?id=44916 Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-18flow_table.c: Use built-in RCU list checkingGravatar Madhuparna Bhowmik 1-2/+4
hlist_for_each_entry_rcu() has built-in RCU and lock checking. Pass cond argument to list_for_each_entry_rcu() to silence false lockdep warning when CONFIG_PROVE_RCU_LIST is enabled by default. Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-18datapath.c: Use built-in RCU list checkingGravatar Madhuparna Bhowmik 1-3/+6
hlist_for_each_entry_rcu() has built-in RCU and lock checking. Pass cond argument to list_for_each_entry_rcu() to silence false lockdep warning when CONFIG_PROVE_RCU_LIST is enabled by default. Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-18vport.c: Use built-in RCU list checkingGravatar Madhuparna Bhowmik 1-1/+2
hlist_for_each_entry_rcu() has built-in RCU and lock checking. Pass cond argument to list_for_each_entry_rcu() to silence false lockdep warning when CONFIG_PROVE_RCU_LIST is enabled by default. Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-18meter.c: Use built-in RCU list checkingGravatar Madhuparna Bhowmik 1-1/+2
hlist_for_each_entry_rcu() has built-in RCU and lock checking. Pass cond argument to list_for_each_entry_rcu() to silence false lockdep warning when CONFIG_PROVE_RCU_LIST is enabled by default. Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-16openvswitch: add TTL decrement actionGravatar Matteo Croce 2-0/+137
New action to decrement TTL instead of setting it to a fixed value. This action will decrement the TTL and, in case of expired TTL, drop it or execute an action passed via a nested attribute. The default TTL expired action is to drop the packet. Supports both IPv4 and IPv6 via the ttl and hop_limit fields, respectively. Tested with a corresponding change in the userspace: # ovs-dpctl dump-flows in_port(2),eth(),eth_type(0x0800), packets:0, bytes:0, used:never, actions:dec_ttl{ttl<=1 action:(drop)},1 in_port(1),eth(),eth_type(0x0800), packets:0, bytes:0, used:never, actions:dec_ttl{ttl<=1 action:(drop)},2 in_port(1),eth(),eth_type(0x0806), packets:0, bytes:0, used:never, actions:2 in_port(2),eth(),eth_type(0x0806), packets:0, bytes:0, used:never, actions:1 # ping -c1 192.168.0.2 -t 42 IP (tos 0x0, ttl 41, id 61647, offset 0, flags [DF], proto ICMP (1), length 84) 192.168.0.1 > 192.168.0.2: ICMP echo request, id 386, seq 1, length 64 # ping -c1 192.168.0.2 -t 120 IP (tos 0x0, ttl 119, id 62070, offset 0, flags [DF], proto ICMP (1), length 84) 192.168.0.1 > 192.168.0.2: ICMP echo request, id 388, seq 1, length 64 # ping -c1 192.168.0.2 -t 1 # Co-developed-by: Bindiya Kurle <bindiyakurle@gmail.com> Signed-off-by: Bindiya Kurle <bindiyakurle@gmail.com> Signed-off-by: Matteo Croce <mcroce@redhat.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-14net: openvswitch: use skb_list_walk_safe helper for gso segmentsGravatar Jason A. Donenfeld 1-7/+4
This is a straight-forward conversion case for the new function, keeping the flow of the existing code as intact as possible. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-24openvswitch: New MPLS actions for layer 2 tunnellingGravatar Martin Varghese 2-6/+58
The existing PUSH MPLS action inserts MPLS header between ethernet header and the IP header. Though this behaviour is fine for L3 VPN where an IP packet is encapsulated inside a MPLS tunnel, it does not suffice the L2 VPN (l2 tunnelling) requirements. In L2 VPN the MPLS header should encapsulate the ethernet packet. The new mpls action ADD_MPLS inserts MPLS header at the start of the packet or at the start of the l3 header depending on the value of l3 tunnel flag in the ADD_MPLS arguments. POP_MPLS action is extended to support ethertype 0x6558. Signed-off-by: Martin Varghese <martin.varghese@nokia.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-09treewide: Use sizeof_field() macroGravatar Pankaj Bharadiya 2-3/+3
Replace all the occurrences of FIELD_SIZEOF() with sizeof_field() except at places where these are defined. Later patches will remove the unused definition of FIELD_SIZEOF(). This patch is generated using following script: EXCLUDE_FILES="include/linux/stddef.h|include/linux/kernel.h" git grep -l -e "\bFIELD_SIZEOF\b" | while read file; do if [[ "$file" =~ $EXCLUDE_FILES ]]; then continue fi sed -i -e 's/\bFIELD_SIZEOF\b/sizeof_field/g' $file; done Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com> Link: https://lore.kernel.org/r/20190924105839.110713-3-pankaj.laxminarayan.bharadiya@intel.com Co-developed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: David Miller <davem@davemloft.net> # for net
2019-12-04net: Fixed updating of ethertype in skb_mpls_push()Gravatar Martin Varghese 1-1/+2
The skb_mpls_push was not updating ethertype of an ethernet packet if the packet was originally received from a non ARPHRD_ETHER device. In the below OVS data path flow, since the device corresponding to port 7 is an l3 device (ARPHRD_NONE) the skb_mpls_push function does not update the ethertype of the packet even though the previous push_eth action had added an ethernet header to the packet. recirc_id(0),in_port(7),eth_type(0x0800),ipv4(tos=0/0xfc,ttl=64,frag=no), actions:push_eth(src=00:00:00:00:00:00,dst=00:00:00:00:00:00), push_mpls(label=13,tc=0,ttl=64,bos=1,eth_type=0x8847),4 Fixes: 8822e270d697 ("net: core: move push MPLS functionality from OvS to core helper") Signed-off-by: Martin Varghese <martin.varghese@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-04openvswitch: support asymmetric conntrackGravatar Aaron Conole 1-0/+11
The openvswitch module shares a common conntrack and NAT infrastructure exposed via netfilter. It's possible that a packet needs both SNAT and DNAT manipulation, due to e.g. tuple collision. Netfilter can support this because it runs through the NAT table twice - once on ingress and again after egress. The openvswitch module doesn't have such capability. Like netfilter hook infrastructure, we should run through NAT twice to keep the symmetry. Fixes: 05752523e565 ("openvswitch: Interface with NAT.") Signed-off-by: Aaron Conole <aconole@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-02Fixed updating of ethertype in function skb_mpls_popGravatar Martin Varghese 1-1/+2
The skb_mpls_pop was not updating ethertype of an ethernet packet if the packet was originally received from a non ARPHRD_ETHER device. In the below OVS data path flow, since the device corresponding to port 7 is an l3 device (ARPHRD_NONE) the skb_mpls_pop function does not update the ethertype of the packet even though the previous push_eth action had added an ethernet header to the packet. recirc_id(0),in_port(7),eth_type(0x8847), mpls(label=12/0xfffff,tc=0/0,ttl=0/0x0,bos=1/1), actions:push_eth(src=00:00:00:00:00:00,dst=00:00:00:00:00:00), pop_mpls(eth_type=0x800),4 Fixes: ed246cee09b9 ("net: core: move pop MPLS functionality from OvS to core helper") Signed-off-by: Martin Varghese <martin.varghese@nokia.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-01openvswitch: remove another BUG_ON()Gravatar Paolo Abeni 1-1/+5
If we can't build the flow del notification, we can simply delete the flow, no need to crash the kernel. Still keep a WARN_ON to preserve debuggability. Note: the BUG_ON() predates the Fixes tag, but this change can be applied only after the mentioned commit. v1 -> v2: - do not leak an skb on error Fixes: aed067783e50 ("openvswitch: Minimize ovs_flow_cmd_del critical section.") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-01openvswitch: drop unneeded BUG_ON() in ovs_flow_cmd_build_info()Gravatar Paolo Abeni 1-1/+4
All the callers of ovs_flow_cmd_build_info() already deal with error return code correctly, so we can handle the error condition in a more gracefull way. Still dump a warning to preserve debuggability. v1 -> v2: - clarify the commit message - clean the skb and report the error (DaveM) Fixes: ccb1352e76cf ("net: Add Open vSwitch kernel components.") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-26openvswitch: fix flow command message sizeGravatar Paolo Abeni 1-1/+5
When user-space sets the OVS_UFID_F_OMIT_* flags, and the relevant flow has no UFID, we can exceed the computed size, as ovs_nla_put_identifier() will always dump an OVS_FLOW_ATTR_KEY attribute. Take the above in account when computing the flow command message size. Fixes: 74ed7ab9264c ("openvswitch: Add support for unique flow IDs.") Reported-by: Qi Jun Ding <qding@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-15net: openvswitch: don't call pad_packet if not necessaryGravatar Tonghao Zhang 1-14/+8
The nla_put_u16/nla_put_u32 makes sure that *attrlen is align. The call tree is that: nla_put_u16/nla_put_u32 -> nla_put attrlen = sizeof(u16) or sizeof(u32) -> __nla_put attrlen -> __nla_reserve attrlen -> skb_put(skb, nla_total_size(attrlen)) nla_total_size returns the total length of attribute including padding. Cc: Joe Stringer <joe@ovn.org> Cc: William Tu <u9012063@gmail.com> Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-14net: openvswitch: add hash info to upcallGravatar Tonghao Zhang 2-1/+37
When using the kernel datapath, the upcall don't include skb hash info relatived. That will introduce some problem, because the hash of skb is important in kernel stack. For example, VXLAN module uses it to select UDP src port. The tx queue selection may also use the hash in stack. Hash is computed in different ways. Hash is random for a TCP socket, and hash may be computed in hardware, or software stack. Recalculation hash is not easy. Hash of TCP socket is computed: tcp_v4_connect -> sk_set_txhash (is random) __tcp_transmit_skb -> skb_set_hash_from_sk There will be one upcall, without information of skb hash, to ovs-vswitchd, for the first packet of a TCP session. The rest packets will be processed in Open vSwitch modules, hash kept. If this tcp session is forward to VXLAN module, then the UDP src port of first tcp packet is different from rest packets. TCP packets may come from the host or dockers, to Open vSwitch. To fix it, we store the hash info to upcall, and restore hash when packets sent back. +---------------+ +-------------------------+ | Docker/VMs | | ovs-vswitchd | +----+----------+ +-+--------------------+--+ | ^ | | | | | | upcall v restore packet hash (not recalculate) | +-+--------------------+--+ | tap netdev | | vxlan module +---------------> +--> Open vSwitch ko +--> or internal type | | +-------------------------+ Reported-at: https://mail.openvswitch.org/pipermail/ovs-dev/2019-October/364062.html Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-06net: openvswitch: select vport upcall portid directlyGravatar Tonghao Zhang 1-2/+3
The commit 69c51582ff786 ("dpif-netlink: don't allocate per thread netlink sockets"), in Open vSwitch ovs-vswitchd, has changed the number of allocated sockets to just one per port by moving the socket array from a per handler structure to a per datapath one. In the kernel datapath, a vport will have only one socket in most case, if so select it directly in fast-path. Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-05Change in Openvswitch to support MPLS label depth of 3 in ingress directionGravatar Martin Varghese 4-33/+85
The openvswitch was supporting a MPLS label depth of 1 in the ingress direction though the userspace OVS supports a max depth of 3 labels. This change enables openvswitch module to support a max depth of 3 labels in the ingress. Signed-off-by: Martin Varghese <martin.varghese@nokia.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-03net: openvswitch: simplify the ovs_dp_cmd_newGravatar Tonghao Zhang 1-22/+38
use the specified functions to init resource. Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com> Tested-by: Greg Rose <gvrose8192@gmail.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-03net: openvswitch: don't unlock mutex when changing the user_features failsGravatar Tonghao Zhang 1-1/+1
Unlocking of a not locked mutex is not allowed. Other kernel thread may be in critical section while we unlock it because of setting user_feature fail. Fixes: 95a7233c4 ("net: openvswitch: Set OvS recirc_id from tc chain index") Cc: Paul Blakey <paulb@mellanox.com> Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com> Tested-by: Greg Rose <gvrose8192@gmail.com> Acked-by: William Tu <u9012063@gmail.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-03net: openvswitch: fix possible memleak on destroy flow-tableGravatar Tonghao Zhang 1-88/+98
When we destroy the flow tables which may contain the flow_mask, so release the flow mask struct. Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com> Tested-by: Greg Rose <gvrose8192@gmail.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-03net: openvswitch: add likely in flow_lookupGravatar Tonghao Zhang 1-2/+2
The most case *index < ma->max, and flow-mask is not NULL. We add un/likely for performance. Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com> Tested-by: Greg Rose <gvrose8192@gmail.com> Acked-by: William Tu <u9012063@gmail.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-03net: openvswitch: simplify the flow_hashGravatar Tonghao Zhang 1-5/+2
Simplify the code and remove the unnecessary BUILD_BUG_ON. Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com> Tested-by: Greg Rose <gvrose8192@gmail.com> Acked-by: William Tu <u9012063@gmail.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-03net: openvswitch: optimize flow-mask looking upGravatar Tonghao Zhang 1-51/+53
The full looking up on flow table traverses all mask array. If mask-array is too large, the number of invalid flow-mask increase, performance will be drop. One bad case, for example: M means flow-mask is valid and NULL of flow-mask means deleted. +-------------------------------------------+ | M | NULL | ... | NULL | M| +-------------------------------------------+ In that case, without this patch, openvswitch will traverses all mask array, because there will be one flow-mask in the tail. This patch changes the way of flow-mask inserting and deleting, and the mask array will be keep as below: there is not a NULL hole. In the fast path, we can "break" "for" (not "continue") in flow_lookup when we get a NULL flow-mask. "break" v +-------------------------------------------+ | M | M | NULL |... | NULL | NULL| +-------------------------------------------+ This patch don't optimize slow or control path, still using ma->max to traverse. Slow path: * tbl_mask_array_realloc * ovs_flow_tbl_lookup_exact * flow_mask_find Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com> Tested-by: Greg Rose <gvrose8192@gmail.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-03net: openvswitch: optimize flow mask cache hash collisionGravatar Tonghao Zhang 1-42/+53
Port the codes to linux upstream and with little changes. Pravin B Shelar, says: | In case hash collision on mask cache, OVS does extra flow | lookup. Following patch avoid it. Link: https://github.com/openvswitch/ovs/commit/0e6efbe2712da03522532dc5e84806a96f6a0dd1 Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com> Tested-by: Greg Rose <gvrose8192@gmail.com> Signed-off-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-03net: openvswitch: shrink the mask array if necessaryGravatar Tonghao Zhang 1-10/+23
When creating and inserting flow-mask, if there is no available flow-mask, we realloc the mask array. When removing flow-mask, if necessary, we shrink mask array. Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com> Tested-by: Greg Rose <gvrose8192@gmail.com> Acked-by: William Tu <u9012063@gmail.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-03net: openvswitch: convert mask list in mask arrayGravatar Tonghao Zhang 3-51/+167
Port the codes to linux upstream and with little changes. Pravin B Shelar, says: | mask caches index of mask in mask_list. On packet recv OVS | need to traverse mask-list to get cached mask. Therefore array | is better for retrieving cached mask. This also allows better | cache replacement algorithm by directly checking mask's existence. Link: https://github.com/openvswitch/ovs/commit/d49fc3ff53c65e4eca9cabd52ac63396746a7ef5 Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com> Tested-by: Greg Rose <gvrose8192@gmail.com> Acked-by: William Tu <u9012063@gmail.com> Signed-off-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-03net: openvswitch: add flow-mask cache for performanceGravatar Tonghao Zhang 3-16/+107
The idea of this optimization comes from a patch which is committed in 2014, openvswitch community. The author is Pravin B Shelar. In order to get high performance, I implement it again. Later patches will use it. Pravin B Shelar, says: | On every packet OVS needs to lookup flow-table with every | mask until it finds a match. The packet flow-key is first | masked with mask in the list and then the masked key is | looked up in flow-table. Therefore number of masks can | affect packet processing performance. Link: https://github.com/openvswitch/ovs/commit/5604935e4e1cbc16611d2d97f50b717aa31e8ec5 Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com> Tested-by: Greg Rose <gvrose8192@gmail.com> Acked-by: William Tu <u9012063@gmail.com> Signed-off-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netGravatar David S. Miller 2-16/+15
The only slightly tricky merge conflict was the netdevsim because the mutex locking fix overlapped a lot of driver reload reorganization. The rest were (relatively) trivial in nature. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-25netns: fix GFP flags in rtnl_net_notifyid()Gravatar Guillaume Nault 1-9/+11
In rtnl_net_notifyid(), we certainly can't pass a null GFP flag to rtnl_notify(). A GFP_KERNEL flag would be fine in most circumstances, but there are a few paths calling rtnl_net_notifyid() from atomic context or from RCU critical sections. The later also precludes the use of gfp_any() as it wouldn't detect the RCU case. Also, the nlmsg_new() call is wrong too, as it uses GFP_KERNEL unconditionally. Therefore, we need to pass the GFP flags as parameter and propagate it through function calls until the proper flags can be determined. In most cases, GFP_KERNEL is fine. The exceptions are: * openvswitch: ovs_vport_cmd_get() and ovs_vport_cmd_dump() indirectly call rtnl_net_notifyid() from RCU critical section, * rtnetlink: rtmsg_ifinfo_build_skb() already receives GFP flags as parameter. Also, in ovs_vport_cmd_build_info(), let's change the GFP flags used by nlmsg_new(). The function is allowed to sleep, so better make the flags consistent with the ones used in the following ovs_vport_cmd_fill_info() call. Found by code inspection. Fixes: 9a9634545c70 ("netns: notify netns id events") Signed-off-by: Guillaume Nault <gnault@redhat.com> Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1990 – 2022 jet tsang zeon-git.
All Rights Reverse Engineered.