aboutsummaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)AuthorFilesLines
2015-04-02vlan: implement ndo_get_iflinkGravatar Nicolas Dichtel 1-1/+8
Don't use dev->iflink anymore. CC: Patrick McHardy <kaber@trash.net> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-02ipmr,ip6mr: implement ndo_get_iflinkGravatar Nicolas Dichtel 2-2/+12
Don't use dev->iflink anymore. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-02ipip,gre,vti,sit: implement ndo_get_iflinkGravatar Nicolas Dichtel 5-5/+13
Don't use dev->iflink anymore. CC: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-02ip6tnl,gre6,vti6: implement ndo_get_iflinkGravatar Nicolas Dichtel 3-10/+11
Don't use dev->iflink anymore. CC: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-02dev: introduce dev_get_iflink()Gravatar Nicolas Dichtel 9-17/+43
The goal of this patch is to prepare the removal of the iflink field. It introduces a new ndo function, which will be implemented by virtual interfaces. There is no functional change into this patch. All readers of iflink field now call dev_get_iflink(). Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-01pkt_sched: fq: correct spelling of locallyGravatar Simon Horman 1-2/+2
Correct spelling of locally. Also remove extra space before tab character in struct fq_flow. Signed-off-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-01can: introduce new raw socket option to join the given CAN filtersGravatar Oliver Hartkopp 1-1/+30
The CAN_RAW socket can set multiple CAN identifier specific filters that lead to multiple filters in the af_can.c filter processing. These filters are indenpendent from each other which leads to logical OR'ed filters when applied. This socket option joines the given CAN filters in the way that only CAN frames are passed to user space that matched *all* given CAN filters. The semantic for the applied filters is therefore changed to a logical AND. This is useful especially when the filterset is a combination of filters where the CAN_INV_FILTER flag is set in order to notch single CAN IDs or CAN ID ranges from the incoming traffic. As the raw_rcv() function is executed from NET_RX softirq the introduced variables are implemented as per-CPU variables to avoid extensive locking at CAN frame reception time. Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2015-04-01can: fix multiple delivery of a single CAN frame for overlapping CAN filtersGravatar Oliver Hartkopp 1-0/+21
The CAN_RAW socket can set multiple CAN identifier specific filters that lead to multiple filters in the af_can.c filter processing. These filters are indenpendent from each other which leads to logical OR'ed filters when applied. This patch makes sure that every CAN frame which is filtered for a specific socket is only delivered once to the user space. This is independent from the number of matching CAN filters of this socket. As the raw_rcv() function is executed from NET_RX softirq the introduced variables are implemented as per-CPU variables to avoid extensive locking at CAN frame reception time. Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2015-03-31Merge tag 'mac80211-next-for-davem-2015-03-30' of ↵Gravatar David S. Miller 46-1111/+1515
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== Lots of updates for net-next; along with the usual flurry of small fixes, cleanups and internal features we have: * VHT support for TDLS and IBSS (conditional on drivers though) * first TX performance improvements (the biggest will come later) * many suspend/resume (race) fixes * name_assign_type support from Tom Gundersen ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-31net: rename dev to orig_dev in deliver_ptype_list_skbGravatar Jiri Pirko 1-2/+3
Unlike other places, this function uses name "dev" for what should be "orig_dev", which might be a bit confusing. So fix this. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-31netlink: implement nla_get_in_addr and nla_get_in6_addrGravatar Jiri Benc 19-53/+44
Those are counterparts to nla_put_in_addr and nla_put_in6_addr. Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-31netlink: implement nla_put_in_addr and nla_put_in6_addrGravatar Jiri Benc 26-110/+97
IP addresses are often stored in netlink attributes. Add generic functions to do that. For nla_put_in_addr, it would be nicer to pass struct in_addr but this is not used universally throughout the kernel, in way too many places __be32 is used to store IPv4 address. Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-31xfrm: simplify xfrm_address_t useGravatar Jiri Benc 4-10/+8
In many places, the a6 field is typecasted to struct in6_addr. As the fields are in union anyway, just add in6_addr type to the union and get rid of the typecasting. Modifying the uapi header is okay, the union has still the same size. Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-31tcp: simplify inetpeer_addr_base useGravatar Jiri Benc 1-14/+8
In many places, the a6 field is typecasted to struct in6_addr. As the fields are in union anyway, just add in6_addr type to the union and get rid of the typecasting. Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-31ipv6: coding style: comparison for inequality with NULLGravatar Ian Morris 17-43/+43
The ipv6 code uses a mixture of coding styles. In some instances check for NULL pointer is done as x != NULL and sometimes as x. x is preferred according to checkpatch and this patch makes the code consistent by adopting the latter form. No changes detected by objdiff. Signed-off-by: Ian Morris <ipm@chirality.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-31ipv6: coding style: comparison for equality with NULLGravatar Ian Morris 25-174/+173
The ipv6 code uses a mixture of coding styles. In some instances check for NULL pointer is done as x == NULL and sometimes as !x. !x is preferred according to checkpatch and this patch makes the code consistent by adopting the latter form. No changes detected by objdiff. Signed-off-by: Ian Morris <ipm@chirality.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-31fib_trie: Cleanup ip_fib_net_exit code pathGravatar Alexander Duyck 1-22/+7
While fixing a recent issue I noticed that we are doing some unnecessary work inside the loop for ip_fib_net_exit. As such I am pulling out the initialization to NULL for the locally stored fib_local, fib_main, and fib_default. In addition I am restoring the original code for flushing the table as there is no need to split up the fib_table_flush and hlist_del work since the code for packing the tnodes with multiple key vectors was dropped. Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-31fib_trie: Fix warning on fib4_rules_exitGravatar Alexander Duyck 1-4/+4
This fixes the following warning: BUG: sleeping function called from invalid context at mm/slub.c:1268 in_atomic(): 1, irqs_disabled(): 0, pid: 6, name: kworker/u8:0 INFO: lockdep is turned off. CPU: 3 PID: 6 Comm: kworker/u8:0 Tainted: G W 4.0.0-rc5+ #895 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 Workqueue: netns cleanup_net 0000000000000006 ffff88011953fa68 ffffffff81a203b6 000000002c3a2c39 ffff88011952a680 ffff88011953fa98 ffffffff8109daf0 ffff8801186c6aa8 ffffffff81fbc9e5 00000000000004f4 0000000000000000 ffff88011953fac8 Call Trace: [<ffffffff81a203b6>] dump_stack+0x4c/0x65 [<ffffffff8109daf0>] ___might_sleep+0x1c3/0x1cb [<ffffffff8109db70>] __might_sleep+0x78/0x80 [<ffffffff8117a60e>] slab_pre_alloc_hook+0x31/0x8f [<ffffffff8117d4f6>] __kmalloc+0x69/0x14e [<ffffffff818ed0e1>] ? kzalloc.constprop.20+0xe/0x10 [<ffffffff818ed0e1>] kzalloc.constprop.20+0xe/0x10 [<ffffffff818ef622>] fib_trie_table+0x27/0x8b [<ffffffff818ef6bd>] fib_trie_unmerge+0x37/0x2a6 [<ffffffff810b06e1>] ? arch_local_irq_save+0x9/0xc [<ffffffff818e9793>] fib_unmerge+0x2d/0xb3 [<ffffffff818f5f56>] fib4_rule_delete+0x1f/0x52 [<ffffffff817f1c3f>] ? fib_rules_unregister+0x30/0xb2 [<ffffffff817f1c8b>] fib_rules_unregister+0x7c/0xb2 [<ffffffff818f64a1>] fib4_rules_exit+0x15/0x18 [<ffffffff818e8c0a>] ip_fib_net_exit+0x23/0xf2 [<ffffffff818e91f8>] fib_net_exit+0x32/0x36 [<ffffffff817c8352>] ops_exit_list+0x45/0x57 [<ffffffff817c8d3d>] cleanup_net+0x13c/0x1cd [<ffffffff8108b05d>] process_one_work+0x255/0x4ad [<ffffffff8108af69>] ? process_one_work+0x161/0x4ad [<ffffffff8108b4b1>] worker_thread+0x1cd/0x2ab [<ffffffff8108b2e4>] ? process_scheduled_works+0x2f/0x2f [<ffffffff81090686>] kthread+0xd4/0xdc [<ffffffff8109ec8f>] ? local_clock+0x19/0x22 [<ffffffff810905b2>] ? __kthread_parkme+0x83/0x83 [<ffffffff81a2c0c8>] ret_from_fork+0x58/0x90 [<ffffffff810905b2>] ? __kthread_parkme+0x83/0x83 The issue was that as a part of exiting the default rules were being deleted which resulted in the local trie being unmerged. By moving the freeing of the FIB tables up we can avoid the unmerge since there is no local table left when we call the fib4_rules_exit function. Fixes: 0ddcf43d5d4a ("ipv4: FIB Local/MAIN table collapse") Reported-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-31Merge branch 'for-upstream' of ↵Gravatar David S. Miller 4-82/+731
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Johan Hedberg says: ==================== pull request: bluetooth-next 2015-03-27 Here's another set of Bluetooth & 802.15.4 patches for 4.1: - New API to control LE advertising data (i.e. peripheral role) - mac802154 & at86rf230 cleanups - Support for toggling quirks from debugfs (useful for testing) - Memory leak fix for LE scanning - Extra version info reading support for Broadcom controllers Please let me know if there are any issues pulling. Thanks. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-30mac80211: set QoS capability before changing station stateGravatar Johannes Berg 1-4/+4
In the upcoming fast-xmit patch, changing station state will build a header cache based on the station's capabilities, and as the QoS capability (sta.wme) impacts the header, it needs to be set before. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-30mac80211: send HT/VHT IEs in TDLS discovery responseGravatar Arik Nemtsov 1-3/+8
These are mandated by IEEE802.11-2012 section 8.5.8.6 and IEEE802.11ac-2013 section 8.5.8.16. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-30mac80211: add VHT support for IBSSGravatar Janusz.Dziedzic@tieto.com 5-11/+80
Add VHT support for IBSS. Drivers could activate this feature by setting NL80211_EXT_FEATURE_VHT_IBSS flag. Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-30mac80211: IBSS fix scan requestGravatar Janusz.Dziedzic@tieto.com 3-12/+97
In case of wide bandwidth (wider than 20MHz) used by IBSS, scan all channels in chandef to be able to find neighboring IBSS netwqworks that use the same overall channels but a different control channel. Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-30mac80211: factor out station lookup from ieee80211_build_hdr()Gravatar Johannes Berg 1-70/+118
In order to look up the RA station earlier to implement a TX fastpath, factor out the lookup from ieee80211_build_hdr(). To always have a valid station pointer, also move some of the checks into the new function. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-30mac80211: make sta.wme indicate whether QoS is usedGravatar Johannes Berg 4-5/+6
Indicating just the peer's capability is fairly pointless if the local device doesn't support it. Make the variable track both combined, and remove the 'local support' check in the TX path. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-30mac80211: send AP probe as unicast againGravatar Johannes Berg 1-1/+1
Louis reported that a static checker was complaining that the 'dst' variable was set (multiple times) but not used. This is due to a previous commit having removed the usage (apparently erroneously), so add it back. Fixes: a344d6778a98 ("mac80211: allow drivers to support NL80211_SCAN_FLAG_RANDOM_ADDR") Reported-by: Louis Langholtz <lou_langholtz@me.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-30mac80111: aes_gcm: clean up ieee80211_aes_gcm_key_setup_encrypt()Gravatar Johannes Berg 1-4/+8
This code is written using an anti-pattern called "success handling" which makes it hard to read, especially if you are used to normal kernel style. It should instead be written as a list of directives in a row with branches for error handling. (Basically copied from Dan's previous patch for CCM) Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-30mac80111: aes_ccm: cleanup ieee80211_aes_key_setup_encrypt()Gravatar Dan Carpenter 1-4/+8
This code is written using an anti-pattern called "success handling" which makes it hard to read, especially if you are used to normal kernel style. It should instead be written as a list of directives in a row with branches for error handling. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-30mac80211: Fix misplaced return in AES-GMAC key setupGravatar Jouni Malinen 1-2/+2
Commit 8ade538bf39b ("mac80111: Add BIP-GMAC-128 and BIP-GMAC-256 ciphers") had the success return in incorrect place before the crypto_aead_setauthsize() call which practically ended up skipping that call unconditionally. The missing call did not actually change any functionality since GMAC_MIC_LEN (16) is identical to the maxauthsize in gcm(aes) and as such, the default value used for the authsize parameter. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-30cfg80211: pass name_assign_type to rdev_add_virtual_intf()Gravatar Tom Gundersen 6-6/+11
This will expose in /sys whether the ifname of a device is set by userspace or generated by the kernel. The latter kind (wlanX, etc) is not deterministic, so userspace needs to rename these devices to names that are guaranteed to stay the same between reboots. The former, however should never be renamed, so userspace needs to be able to reliably tell the difference. Similar functionality was introduced for the rtnetlink core in commit 5517750f058e ("net: rtnetlink - make create_link take name_assign_type") Signed-off-by: Tom Gundersen <teg@jklm.no> Cc: Kalle Valo <kvalo@qca.qualcomm.com> Cc: Brett Rudley <brudley@broadcom.com> Cc: Arend van Spriel <arend@broadcom.com> Cc: Franky (Zhenhui) Lin <frankyl@broadcom.com> Cc: Hante Meuleman <meuleman@broadcom.com> Cc: Johannes Berg <johannes@sipsolutions.net> [reformat changelog to fit 72 cols] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-30mac80211: fix typo in debug outputGravatar Michael Braun 1-1/+1
Signed-off-by: Michael Braun <michael-dev@fami-braun.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-30mac80211: reject aggregation sessions with non-HT peersGravatar Johannes Berg 2-1/+12
If a peer or some local agent (rate control, ...) decides to start an aggregation session but doesn't support HT (which also implies QoS), reject it. This is mostly a corner case as such peers normally won't try to use block-ack sessions and rate control wouldn't start them, but technically QoS stations could request it according to the spec. However, since drivers don't really support such non-HT sessions it's better to reject them. Also, while at it, move the tracing for TX sessions earlier so it captures the error cases as well. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-30cfg/mac80211: add regulatory classes IE during TDLS setupGravatar Arik Nemtsov 2-0/+150
Seems Broadcom TDLS peers (Nexus 5, Xperia Z3) refuse to allow TDLS connection when channel-switching is supported but the regulatory classes IE is missing from the setup request. Add a chandef to reg-class translation function to cfg80211 and use it to add the required IE during setup. For now add only the current regulatory class as supported - it is enough to resolve the compatibility issue. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-30mac80211: stop scan before connectionGravatar David Spinadel 1-0/+4
Stop scan before authentication or association to make sure that nothing interferes with connection flow. Currently mac80211 defers RX auth and assoc packets (among other ones) until after the scan is complete, so auth during scan is likely to fail if scan took too much time. Signed-off-by: David Spinadel <david.spinadel@intel.com> Reviewed-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-30nl80211: add net-detect delay to wowlan infoGravatar Luciano Coelho 1-2/+3
Pass the initial net-detect delay (NL80211_ATTR_SCHED_SCAN_DELAY) attribute in the WoWLAN info response. Additionally, remove a bogus TODO comment. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-30mac80211: notify the driver about deauthGravatar Emmanuel Grumbach 1-18/+42
This can allow the driver to take action based on the reason of the deauth. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-30mac80211: notify the driver about association statusGravatar Emmanuel Grumbach 1-0/+15
This can allow the driver to take action based on the success / failure of the association. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-30mac80211: notify the driver about authentication statusGravatar Emmanuel Grumbach 1-0/+15
This can allow the driver to take action based on the success / failure of the authentication. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-30mac80211: convert rssi_callback() to event_callback()Gravatar Emmanuel Grumbach 3-15/+20
We will be able to add more events, such as MLME events and others. The low level driver may be interested in knowing about these events to dump firmware data upon failures, or to change parameters in case connection attempts fail etc... Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-30mac80211: agg-tx: avoid sending DelBA with sta->lock heldGravatar Johannes Berg 1-2/+7
The rate control locking caused a potential deadlock here due to the locks being acquired in different orders, so that change cannot yet be applied. However, there's no fundamental reason for this code to hold the sta->lock while transmitting frames. Clearly it's better not to hold the lock for longer periods of time, which can happen here since we call all the way down to the driver. Change the code a bit to not hold it while doing that. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-29tipc: fix two bugs in secondary destination lookupGravatar Jon Paul Maloy 3-1/+14
A message sent to a node after a successful name table lookup may still find that the destination socket has disappeared, because distribution of name table updates is non-atomic. If so, the message will be rejected back to the sender with error code TIPC_ERR_NO_PORT. If the source socket of the message has disappeared in the meantime, the message should be dropped. However, in the currrent code, the message will instead be subject to an unwanted tertiary lookup, because the function tipc_msg_lookup_dest() doesn't check if there is an error code present in the message before performing the lookup. In the worst case, the message may now find the old destination again, and be redirected once more, instead of being dropped directly as it should be. A second bug in this function is that the "prev_node" field in the message is not updated after successful lookup, something that may have unpredictable consequences. The problems arising from those bugs occur very infrequently. The third change in this function; the test on msg_reroute_msg_cnt() is purely cosmetic, reflecting that the returned value never can be negative. This commit corrects the two bugs described above. Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-29net: Introduce passthru_features_checkGravatar Toshiaki Makita 1-0/+8
As there are a number of (especially virtual) devices that don't need the multiple vlan check, introduce passthru_features_check() for convenience. Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-29net: Move check for multiple vlans to driversGravatar Toshiaki Makita 1-12/+9
To allow drivers to handle the features check for multiple tags, move the check to ndo_features_check(). As no drivers currently handle multiple tagged TSO, introduce dflt_features_check() and call it if the driver does not have ndo_features_check(). Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-29vlan: Introduce helper functions to check if skb is taggedGravatar Toshiaki Makita 1-16/+8
Separate the two checks for single vlan and multiple vlans in netif_skb_features(). This allows us to move the check for multiple vlans to another function later. Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-29vlan: Add features for stacked vlan deviceGravatar Toshiaki Makita 1-0/+1
Stacked vlan devices curretly have few features (GRO, HIGHDMA, LLTX). Since we have software fallbacks in case the NIC can not handle some features for multiple vlans, we can add the same features as the lower vlan devices for stacked vlan devices. This allows stacked vlan devices to create large (GSO) packets and not to segment packets. Those packets will be segmented by software on the real device, or even can be segmented by the NIC once TSO for multiple vlans becomes enabled by the following patches. The exception is those related to FCoE, which does not have a software fallback. Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-29tc: bpf: generalize pedit actionGravatar Alexei Starovoitov 1-2/+69
existing TC action 'pedit' can munge any bits of the packet. Generalize it for use in bpf programs attached as cls_bpf and act_bpf via bpf_skb_store_bytes() helper function. Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Reviewed-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-29net: dsa: Add basic framework to support ndo_fdb functionsGravatar Guenter Roeck 1-0/+102
Provide callbacks for ndo_fdb_add, ndo_fdb_del, and ndo_fdb_dump. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-nextGravatar David S. Miller 13-221/+332
Pablo Neira Ayuso says: ==================== Netfilter updates for net-next The following patchset contains Netfilter updates for your net-next tree. Basically, nf_tables updates to add the set extension infrastructure and finish the transaction for sets from Patrick McHardy. More specifically, they are: 1) Move netns to basechain and use recently added possible_net_t, from Patrick McHardy. 2) Use LOGLEVEL_<FOO> from nf_log infrastructure, from Joe Perches. 3) Restore nf_log_trace that was accidentally removed during conflict resolution. 4) nft_queue does not depend on NETFILTER_XTABLES, starting from here all patches from Patrick McHardy. 5) Use raw_smp_processor_id() in nft_meta. Then, several patches to prepare ground for the new set extension infrastructure: 6) Pass object length to the hash callback in rhashtable as needed by the new set extension infrastructure. 7) Cleanup patch to restore struct nft_hash as wrapper for struct rhashtable 8) Another small source code readability cleanup for nft_hash. 9) Convert nft_hash to rhashtable callbacks. And finally... 10) Add the new set extension infrastructure. 11) Convert the nft_hash and nft_rbtree sets to use it. 12) Batch set element release to avoid several RCU grace period in a row and add new function nft_set_elem_destroy() to consolidate set element release. 13) Return the set extension data area from nft_lookup. 14) Refactor existing transaction code to add some helper functions and document it. 15) Complete the set transaction support, using similar approach to what we already use, to activate/deactivate elements in an atomic fashion. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-29tipc: involve reference counter for node structureGravatar Ying Xue 6-30/+79
TIPC node hash node table is protected with rcu lock on read side. tipc_node_find() is used to look for a node object with node address through iterating the hash node table. As the entire process of what tipc_node_find() traverses the table is guarded with rcu read lock, it's safe for us. However, when callers use the node object returned by tipc_node_find(), there is no rcu read lock applied. Therefore, this is absolutely unsafe for callers of tipc_node_find(). Now we introduce a reference counter for node structure. Before tipc_node_find() returns node object to its caller, it first increases the reference counter. Accordingly, after its caller used it up, it decreases the counter again. This can prevent a node being used by one thread from being freed by another thread. Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Jon Maloy <jon.maloy@ericson.com> Signed-off-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-29tipc: fix potential deadlock when all links are resetGravatar Ying Xue 5-32/+8
[ 60.988363] ====================================================== [ 60.988754] [ INFO: possible circular locking dependency detected ] [ 60.989152] 3.19.0+ #194 Not tainted [ 60.989377] ------------------------------------------------------- [ 60.989781] swapper/3/0 is trying to acquire lock: [ 60.990079] (&(&n_ptr->lock)->rlock){+.-...}, at: [<ffffffffa0006dca>] tipc_link_retransmit+0x1aa/0x240 [tipc] [ 60.990743] [ 60.990743] but task is already holding lock: [ 60.991106] (&(&bclink->lock)->rlock){+.-...}, at: [<ffffffffa00004be>] tipc_bclink_lock+0x8e/0xa0 [tipc] [ 60.991738] [ 60.991738] which lock already depends on the new lock. [ 60.991738] [ 60.992174] [ 60.992174] the existing dependency chain (in reverse order) is: [ 60.992174] -> #1 (&(&bclink->lock)->rlock){+.-...}: [ 60.992174] [<ffffffff810a9c0c>] lock_acquire+0x9c/0x140 [ 60.992174] [<ffffffff8179c41f>] _raw_spin_lock_bh+0x3f/0x50 [ 60.992174] [<ffffffffa00004be>] tipc_bclink_lock+0x8e/0xa0 [tipc] [ 60.992174] [<ffffffffa0000f57>] tipc_bclink_add_node+0x97/0xf0 [tipc] [ 60.992174] [<ffffffffa0011815>] tipc_node_link_up+0xf5/0x110 [tipc] [ 60.992174] [<ffffffffa0007783>] link_state_event+0x2b3/0x4f0 [tipc] [ 60.992174] [<ffffffffa00193c0>] tipc_link_proto_rcv+0x24c/0x418 [tipc] [ 60.992174] [<ffffffffa0008857>] tipc_rcv+0x827/0xac0 [tipc] [ 60.992174] [<ffffffffa0002ca3>] tipc_l2_rcv_msg+0x73/0xd0 [tipc] [ 60.992174] [<ffffffff81646e66>] __netif_receive_skb_core+0x746/0x980 [ 60.992174] [<ffffffff816470c1>] __netif_receive_skb+0x21/0x70 [ 60.992174] [<ffffffff81647295>] netif_receive_skb_internal+0x35/0x130 [ 60.992174] [<ffffffff81648218>] napi_gro_receive+0x158/0x1d0 [ 60.992174] [<ffffffff81559e05>] e1000_clean_rx_irq+0x155/0x490 [ 60.992174] [<ffffffff8155c1b7>] e1000_clean+0x267/0x990 [ 60.992174] [<ffffffff81647b60>] net_rx_action+0x150/0x360 [ 60.992174] [<ffffffff8105ec43>] __do_softirq+0x123/0x360 [ 60.992174] [<ffffffff8105f12e>] irq_exit+0x8e/0xb0 [ 60.992174] [<ffffffff8179f9f5>] do_IRQ+0x65/0x110 [ 60.992174] [<ffffffff8179da6f>] ret_from_intr+0x0/0x13 [ 60.992174] [<ffffffff8100de9f>] arch_cpu_idle+0xf/0x20 [ 60.992174] [<ffffffff8109dfa6>] cpu_startup_entry+0x2f6/0x3f0 [ 60.992174] [<ffffffff81033cda>] start_secondary+0x13a/0x150 [ 60.992174] -> #0 (&(&n_ptr->lock)->rlock){+.-...}: [ 60.992174] [<ffffffff810a8f7d>] __lock_acquire+0x163d/0x1ca0 [ 60.992174] [<ffffffff810a9c0c>] lock_acquire+0x9c/0x140 [ 60.992174] [<ffffffff8179c41f>] _raw_spin_lock_bh+0x3f/0x50 [ 60.992174] [<ffffffffa0006dca>] tipc_link_retransmit+0x1aa/0x240 [tipc] [ 60.992174] [<ffffffffa0001e11>] tipc_bclink_rcv+0x611/0x640 [tipc] [ 60.992174] [<ffffffffa0008646>] tipc_rcv+0x616/0xac0 [tipc] [ 60.992174] [<ffffffffa0002ca3>] tipc_l2_rcv_msg+0x73/0xd0 [tipc] [ 60.992174] [<ffffffff81646e66>] __netif_receive_skb_core+0x746/0x980 [ 60.992174] [<ffffffff816470c1>] __netif_receive_skb+0x21/0x70 [ 60.992174] [<ffffffff81647295>] netif_receive_skb_internal+0x35/0x130 [ 60.992174] [<ffffffff81648218>] napi_gro_receive+0x158/0x1d0 [ 60.992174] [<ffffffff81559e05>] e1000_clean_rx_irq+0x155/0x490 [ 60.992174] [<ffffffff8155c1b7>] e1000_clean+0x267/0x990 [ 60.992174] [<ffffffff81647b60>] net_rx_action+0x150/0x360 [ 60.992174] [<ffffffff8105ec43>] __do_softirq+0x123/0x360 [ 60.992174] [<ffffffff8105f12e>] irq_exit+0x8e/0xb0 [ 60.992174] [<ffffffff8179f9f5>] do_IRQ+0x65/0x110 [ 60.992174] [<ffffffff8179da6f>] ret_from_intr+0x0/0x13 [ 60.992174] [<ffffffff8100de9f>] arch_cpu_idle+0xf/0x20 [ 60.992174] [<ffffffff8109dfa6>] cpu_startup_entry+0x2f6/0x3f0 [ 60.992174] [<ffffffff81033cda>] start_secondary+0x13a/0x150 [ 60.992174] [ 60.992174] other info that might help us debug this: [ 60.992174] [ 60.992174] Possible unsafe locking scenario: [ 60.992174] [ 60.992174] CPU0 CPU1 [ 60.992174] ---- ---- [ 60.992174] lock(&(&bclink->lock)->rlock); [ 60.992174] lock(&(&n_ptr->lock)->rlock); [ 60.992174] lock(&(&bclink->lock)->rlock); [ 60.992174] lock(&(&n_ptr->lock)->rlock); [ 60.992174] [ 60.992174] *** DEADLOCK *** [ 60.992174] [ 60.992174] 3 locks held by swapper/3/0: [ 60.992174] #0: (rcu_read_lock){......}, at: [<ffffffff81646791>] __netif_receive_skb_core+0x71/0x980 [ 60.992174] #1: (rcu_read_lock){......}, at: [<ffffffffa0002c35>] tipc_l2_rcv_msg+0x5/0xd0 [tipc] [ 60.992174] #2: (&(&bclink->lock)->rlock){+.-...}, at: [<ffffffffa00004be>] tipc_bclink_lock+0x8e/0xa0 [tipc] [ 60.992174] The correct the sequence of grabbing n_ptr->lock and bclink->lock should be that the former is first held and the latter is then taken, which exactly happened on CPU1. But especially when the retransmission of broadcast link is failed, bclink->lock is first held in tipc_bclink_rcv(), and n_ptr->lock is taken in link_retransmit_failure() called by tipc_link_retransmit() subsequently, which is demonstrated on CPU0. As a result, deadlock occurs. If the order of holding the two locks happening on CPU0 is reversed, the deadlock risk will be relieved. Therefore, the node lock taken in link_retransmit_failure() originally is moved to tipc_bclink_rcv() so that it's obtained before bclink lock. But the precondition of the adjustment of node lock is that responding to bclink reset event must be moved from tipc_bclink_unlock() to tipc_node_unlock(). Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Signed-off-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1990 – 2022 jet tsang zeon-git.
All Rights Reverse Engineered.