aboutsummaryrefslogtreecommitdiff
path: root/sound/soc/davinci
AgeCommit message (Collapse)AuthorFilesLines
2018-08-31ASoC: davinci-mcasp: Add support for FIFO usage caused delay reportingGravatar Peter Ujfalusi 1-0/+37
McASP have write and read FIFO, each 64 words deep. From the WFIFOS/RFIFOS registers we can read the amount of data currently in the FIFO which can be directly reported as delay. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-08-03ASoC: davinci-i2s: mark expected switch fall-throughGravatar Gustavo A. R. Silva 1-0/+1
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Addresses-Coverity-ID: 1364478 ("Missing break in switch") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-04ASoC: davinci: Use snd_pcm_stop_xrun() helperGravatar Takashi Iwai 1-12/+4
Replace open-codes with the standard snd_pcm_stop_xrun() helper. It simplifies codes a lot. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-06-12treewide: devm_kzalloc() -> devm_kcalloc()Gravatar Kees Cook 1-6/+8
The devm_kzalloc() function has a 2-factor argument form, devm_kcalloc(). This patch replaces cases of: devm_kzalloc(handle, a * b, gfp) with: devm_kcalloc(handle, a * b, gfp) as well as handling cases of: devm_kzalloc(handle, a * b * c, gfp) with: devm_kzalloc(handle, array3_size(a, b, c), gfp) as it's slightly less ugly than: devm_kcalloc(handle, array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: devm_kzalloc(handle, 4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. Some manual whitespace fixes were needed in this patch, as Coccinelle really liked to write "=devm_kcalloc..." instead of "= devm_kcalloc...". The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ expression HANDLE; type TYPE; expression THING, E; @@ ( devm_kzalloc(HANDLE, - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | devm_kzalloc(HANDLE, - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression HANDLE; expression COUNT; typedef u8; typedef __u8; @@ ( devm_kzalloc(HANDLE, - sizeof(u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ expression HANDLE; type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ expression HANDLE; identifier SIZE, COUNT; @@ - devm_kzalloc + devm_kcalloc (HANDLE, - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression HANDLE; expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression HANDLE; expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ expression HANDLE; identifier STRIDE, SIZE, COUNT; @@ ( devm_kzalloc(HANDLE, - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression HANDLE; expression E1, E2, E3; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression HANDLE; expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, sizeof(THING) * C2, ...) | devm_kzalloc(HANDLE, sizeof(TYPE) * C2, ...) | devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, C1 * C2, ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * E2 + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * (E2) + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-05-17ASoC: davinci-mcasp: Only disable inactive serializerGravatar Vishal Thanki 1-1/+1
As a side effect of the following commit, the active TX serializer may get disabled which may result in distorted audio output. ASoC: davinci-mcasp: Add support for multichannel playback (2952b27e2e463b28d5c0f04000f96b968137ca42) For example, if a 4 channel I2S playback with two TX serializers is activated. Later on, if a recording of 2 channels, with only 1 RX serializer is started, which will also disable one of the TX serializer because max_active_serializers is only calculated for RX (recording) stream. This patch fixes this issue. Signed-off-by: Vishal Thanki <vishalthanki@gmail.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-05-11ASoC: davinci-mcasp: Convert to use the sdma-pcm instead of omap-pcmGravatar Peter Ujfalusi 2-5/+5
Use the new platform driver in case of sDMA. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-02-12ASoC: davinci-i2s: replace platform to componentGravatar Kuninori Morimoto 1-6/+7
Now platform can be replaced to component, let's do it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-05ASoC: davinci-mcasp: Add rule to constrain the minimum period sizeGravatar Peter Ujfalusi 1-0/+19
The minimum period size (in frames) must be not lower than the FIFO size of McASP and in general too small period size would easily result underrun in applications as eDMA - the most common DMA servicing McASP have support for limited number of periods. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-11-10Merge remote-tracking branches 'asoc/topic/cygnus', 'asoc/topic/da7213', ↵Gravatar Mark Brown 1-1/+14
'asoc/topic/davinci' and 'asoc/topic/doc' into asoc-next
2017-11-10Merge tag 'asoc-fix-v4.14-rc6' into asoc-linusGravatar Mark Brown 1-2/+4
ASoC: Fixes for v4.14 I've been quite lax in sending these due to conference season but here's a fairly large collection of ASoC updates. The one thing that's not device specific is Takashi's fix for races between delayed work and PCM destruction, otherwise everything is specific to an individual device. # gpg: Signature made Thu 26 Oct 2017 15:11:23 BST # gpg: using RSA key ADE668AA675718B59FE29FEA24D68B725D5487D0 # gpg: issuer "broonie@kernel.org" # gpg: Good signature from "Mark Brown <broonie@sirena.org.uk>" [unknown] # gpg: aka "Mark Brown <broonie@debian.org>" [unknown] # gpg: aka "Mark Brown <broonie@kernel.org>" [unknown] # gpg: aka "Mark Brown <broonie@tardis.ed.ac.uk>" [unknown] # gpg: aka "Mark Brown <broonie@linaro.org>" [unknown] # gpg: aka "Mark Brown <Mark.Brown@linaro.org>" [unknown] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 3F25 68AA C269 98F9 E813 A1C5 C3F4 36CA 30F5 D8EB # Subkey fingerprint: ADE6 68AA 6757 18B5 9FE2 9FEA 24D6 8B72 5D54 87D0
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGravatar Greg Kroah-Hartman 1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-21ASoC: davinci-mcasp: Handle return value of devm_kasprintfGravatar Arvind Yadav 1-0/+12
devm_kasprintf() can fail here and we must check its return value. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-09-20ASoC: davinci: Kill BUG_ON() usageGravatar Takashi Iwai 1-1/+2
Don't use BUG_ON() for a non-critical sanity check on production systems. This patch replaces with a softer WARN_ON() and an error path. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-09-19ASoC: davinci-mcasp: Fix an error handling path in 'davinci_mcasp_probe()'Gravatar Christophe Jaillet 1-2/+4
All error handling paths in this function 'goto err' except this one. If one of the 2 previous memory allocations fails, we should go through the existing error handling path. Otherwise there is an unbalanced pm_runtime_enable()/pm_runtime_disable(). Fixes: dd55ff8346a9 ("ASoC: davinci-mcasp: Add set_tdm_slots() support") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-08-27ASoC: davinci-mcasp: check memory allocation failureGravatar Christophe Jaillet 1-0/+4
Check memory allocation failures and return -ENOMEM in such cases, as already done above for another memory allocation. This avoids NULL pointers dereference. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-08-14ASoC: DaVinci: Delete an error message for a failed memory allocation in two ↵Gravatar Markus Elfring 2-6/+1
functions Omit an extra message for a memory allocation failure in these functions. This issue was detected by using the Coccinelle software. Link: http://events.linuxfoundation.org/sites/events/files/slides/LCJ16-Refactor_Strings-WSang_0.pdf Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-05-14ASoC: davinci-mcasp: Support for one channel (mono) audioGravatar Peter Ujfalusi 1-6/+6
Mono audio can be achieved by configuring McASP to transmit/receive only during one timeslot. McASP will still going to generate clocks for the other slot(s), but will only use the single slot to transmit/receive. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-01-27ASoC: davinci - Fix possible NULL derefrence.Gravatar Shailendra Verma 1-3/+10
of_match_device could return NULL, and so can cause a NULL pointer dereference later. Signed-off-by: Shailendra Verma <shailendra.v@samsung.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-01ASoC: davinci-mcasp: off-by-one in davinci_mcasp_hw_rule_format()Gravatar Peter Ujfalusi 1-1/+1
The SNDRV_PCM_FORMAT_LAST is valid, we should not skip it. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-06-02ASoC: davinci-mcasp: Use a copy of pdata per instance during DT bootGravatar Peter Ujfalusi 1-1/+8
Instead of modifying the static pdata struct per McASP instance we need to allocate pdata for each McASP. This way we can avoid configuration leakage from prior McASP to McASP drivers probed at later time. Reported-by: Misael Lopez Cruz <misael.lopez@ti.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-06-02ASoC: davinci-mcasp: Fix dra7 DMA offset when using CFG portGravatar Peter Ujfalusi 2-6/+54
The TX and RX offset is different for each serializers when using the CFG port for DMA access. When using the CFG port only one serializer can be used per direction so print error message and only configure the first serializer's offset. Reported-by: Misael Lopez Cruz <misael.lopez@ti.com> Suggested-by: Misael Lopez Cruz <misael.lopez@ti.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-05-13Merge remote-tracking branches 'asoc/topic/davinci' and 'asoc/topic/dwc' ↵Gravatar Mark Brown 4-59/+122
into asoc-next
2016-05-09ASoC: davinci-mcasp: Calculate AUXCLK divider when setting up master clocksGravatar Peter Ujfalusi 1-4/+25
If the McASP is used as clock master and the reference clock is AUXCLK we can have additional level of divider. The BCLK divider is limited to maximum 32, if the desired bclk can not be reached with this, the AUXCLK divider also needs to be used. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-05-09ASoC: davinci-mcasp: Restructure the davinci_mcasp_calc_clk_div()Gravatar Peter Ujfalusi 1-19/+19
Change the return value to error_pmm instead of the BCLK div and handle the divider configuration to McASP within the function when the set flag is true. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-05-09ASoC: davinci-mcasp: Change __davinci_mcasp_set_clkdiv() first parameterGravatar Peter Ujfalusi 1-5/+5
Change the first parameter to struct davinci_mcasp* from struct snd_soc_dai* The function internally does not use or need the DAI information. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-05-09ASoC: davinci-mcasp: Use defines for clkdiv IDsGravatar Peter Ujfalusi 2-3/+9
Instead of hardwired IDs add defines for the available dividers. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-05-09ASoC: davinci-mcasp: Do not allow multiple streams in one directionGravatar Peter Ujfalusi 1-2/+6
Make sure that the user can not start multiple streams with the same direction. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-04-29ASoC: davinci-mcasp: Fix overwriting of ahclkxGravatar Jim Lodes 1-1/+1
The mcasp davinci_mcasp_set_dai_fmt function was overriding ahclkx input/output status that had already been set by the davinci_mcasp_set_sysclk function. This commit removes clearing of the ahclkx input/output status from davinci_mcasp_set_dai_fmt. Signed-off-by: Jim Lodes <jim.lodes@garmin.com> Signed-off-by: J.D. Schroeder <jay.schroeder@garmin.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-04-18ASoC: Davinci: McBSP: add device tree support for McBSPGravatar Petr Kulhavy 2-27/+59
This adds DT support for the TI DA8xx/OMAP-L1x/AM17xx/AM18xx McBSP driver. Signed-off-by: Petr Kulhavy <petr@barix.com> Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-12ASoC: davinci: Kconfig: Update the edma-pcm section's dependency and helpGravatar Peter Ujfalusi 1-1/+2
Instead of depending on individual SoCs make the edma-pcm depend on the eDMA dmaengine driver (TI_EDMA). Update the help text and add DRA7xx family since they have eDMA integrated as well along with sDMA. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-12ASoC: davinci-mcasp: dai format runtime reconfigurationGravatar Peter Ujfalusi 1-0/+10
In case when the dai format is set via the dai_link the format configuration happens once when the links are probed. If the McASP lose context after this, the information will be lost and McASP will not going to work correctly. To overcome this issue, we save the fmt and set it within hw_params as well. Reported-by: Misael Lopez Cruz <misael.lopez@ti.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Jyri Sarha <jsarha@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-01-27ASoC: davinci-mcasp: Discourage use of fck_parent for clock reparentingGravatar Peter Ujfalusi 1-0/+2
The in-driver clock reparenting had been added when we did not had other means to cleanly set the parent for the fck. Now we can use assigned-clocks/assigned-clock-parents in DT binding. Print warning when the fck_parent is present for McASP and recommend the switch to the proper way to handle the clock selection. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-23Merge remote-tracking branches 'asoc/fix/davinci', 'asoc/fix/es8328', ↵Gravatar Mark Brown 1-2/+2
'asoc/fix/fsl-sai', 'asoc/fix/rockchip', 'asoc/fix/sgtl5000' and 'asoc/fix/wm8974' into asoc-linus
2015-12-11ASoC: davinci-mcasp: Fix XDATA check in mcasp_start_txGravatar Peter Ujfalusi 1-2/+2
The condition for checking for XDAT being cleared was not correct. Fixes: 36bcecd0a73eb ("ASoC: davinci-mcasp: Correct TX start sequence") Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2015-11-23ASoC: davinci-mcasp: Fix master capture only modeGravatar Peter Ujfalusi 1-0/+8
When McASP is used as TX/RX synchronous (TX side generating clocks for RX side also) and only capture is used we need to configure the number of TX slots in order McASP to be able to generate the Frame sync. Fixes: 9273de1940d9e ("ASoC: davinci-mcasp: Add set_tdm_slots() support") Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-11-10ASoC: davinci-mcasp: Fix TDM slot rx/tx mask associationsGravatar Andreas Dannenberg 1-2/+2
Fixes the associations between the tx_mask and rx_mask and the associated playback / capture streams during setting of the TDM slot. With this patch in place it is now possible for example to only populate tx_mask (leaving rx_mask as 0) for output-only codecs to control the TDM slot(s) the McASP serial port uses for transmit. Before that, this scenario would incorrectly rely on the rx_mask for this. Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Reviewed-by: Jyri Sarha <jsarha@ti.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-09-23Merge remote-tracking branches 'asoc/topic/blackfin', 'asoc/topic/davinci', ↵Gravatar Mark Brown 1-103/+202
'asoc/topic/fsl', 'asoc/topic/hdmi' and 'asoc/topic/intel' into asoc-next
2015-09-18ASoC: davinci-mcasp: Fix devm_kasprintf format stringGravatar Peter Ujfalusi 1-3/+3
The '\n' at the end of the format string is not needed. It adds an extra line break when doing cat /proc/interrupts Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-09-17ASoC: davinci-mcasp: Get rid of bclk_lrclk_ratio in private dataGravatar Jyri Sarha 1-25/+31
The slot_width is for essentially same thing. Instead of storing bclk_lrclk_ratio, just store the slot_width. Comments has been updated accordingly and some variable names changed to more descriptive. Signed-off-by: Jyri Sarha <jsarha@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-09-16ASoC: davinci-mcasp: Add set_tdm_slots() supportGravatar Jyri Sarha 1-81/+174
Implements set_tdm_slot() callback for mcasp. Channel constraints are updated according to the configured tdm mask and slots each time set_tdm_slot() is called. The special case when slot width is set to zero is allowed and it means that slot width is the same as the sample width. Signed-off-by: Jyri Sarha <jsarha@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-09-14ASoC: davinci-mcasp: Set .symmetric_rates = 1 in snd_soc_dai_driverGravatar Jyri Sarha 1-0/+1
The TX and RX direction share the same bit clock and frame sync, so the samplerate must be the same to both directions. Signed-off-by: Jyri Sarha <jsarha@ti.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-09-14ASoC: davinci-mcasp: Revise the FIFO threshold calculationGravatar Peter Ujfalusi 1-4/+3
The FIFO threshold for McASP should be <=[tx/rx]numevt so the initial value for the refining should meet this requirement as well. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-30Merge remote-tracking branches 'asoc/topic/davinci', ↵Gravatar Mark Brown 3-44/+13
'asoc/topic/davinci-vcif', 'asoc/topic/doc' and 'asoc/topic/dpcm' into asoc-next
2015-08-25ASoC: davinci: Convert to use devm_ioremap_resourceGravatar Axel Lin 2-33/+10
Use devm_ioremap_resource() instead of open code. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-17ASoC: davinci-vcif: Use devm_snd_soc_register_componentGravatar Vaishali Thakkar 1-11/+3
Use resource managed function devm_snd_soc_register_component for component registration instead of snd_soc_register_component. Also, remove davinci_vcif_remove as it is now redundant. Signed-off-by: Vaishali Thakkar <vthakkar1994@gmail.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-22Merge remote-tracking branch 'asoc/topic/davinci' into asoc-nextGravatar Mark Brown 2-11/+66
2015-06-09ASoC: davinci-mcasp: Choose PCM driver based on configured DMA controllerGravatar Jyri Sarha 1-10/+60
Find the configured DMA controller by asking for a DMA channel in the probe phase and releasing it right after. The controller device can be found via the dma_chan struct and the controller is recognized from the compatible property of its device node. The patch assumes EDMA if there is no device node. Signed-off-by: Jyri Sarha <jsarha@ti.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-08ASoC: davinci-mcasp: Logic low for inactive output slotsGravatar Misael Lopez Cruz 2-1/+6
The default state when serializers are in inactive slots is Hi-Z. In some cases, there are no additional components driving the data lines to a safe state so they might have noise. While in inactive slots, the McASP AXR pins configured as outputs can be driven low through the serializer pin drive mode setting (DISMOD) to prevent such noise. Signed-off-by: Misael Lopez Cruz <misael.lopez@ti.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-05Merge remote-tracking branches 'asoc/topic/davinci' and 'asoc/topic/dpcm' ↵Gravatar Mark Brown 1-77/+90
into asoc-next
2015-04-30ASoC: davinci-mcasp: Correct pm status check in suspend callbackGravatar Peter Ujfalusi 1-1/+1
pm_runtime_enabled() will only tell if the pm runtime has been enabled for the device, which is done at probe time but will not tell the actual power state of the device. pm_runtime_active() provides this information. This patch fixes a kernel crash when doing suspend when McASP is not active. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
Copyright © 1990 – 2022 jet tsang zeon-git.
All Rights Reverse Engineered.