| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
As reported by Viktor, plain accesses in LKMM are weaker than
accesses to registers: the latter carry dependencies but the former
do not. This is exemplified in the following snippet:
int r = READ_ONCE(*x);
WRITE_ONCE(*y, r);
Here a data dependency links the READ_ONCE() to the WRITE_ONCE(),
preserving their order, because the model treats r as a register.
If r is turned into a memory location accessed by plain accesses,
however, the link is broken and the order between READ_ONCE() and
WRITE_ONCE() is no longer preserved.
This is too conservative, since any optimizations on plain
accesses that might break dependencies are also possible on
registers; it also contradicts the intuitive notion of "dependency"
as the data stored by the WRITE_ONCE() does depend on the data read
by the READ_ONCE(), independently of whether r is a register or a
memory location.
This is resolved by redefining all dependencies to include
dependencies carried by memory accesses; a dependency is said to be
carried by memory accesses (in the model: carry-dep) from one load
to another load if the initial load is followed by an arbitrarily
long sequence alternating between stores and loads of the same
thread, where the data of each store depends on the previous load,
and is read by the next load.
Any dependency linking the final load in the sequence to another
access also links the initial load in the sequence to that access.
More deep details can be found in this LKML discussion:
https://lore.kernel.org/lkml/d86295788ad14a02874ab030ddb8a6f8@huawei.com/
Reported-by: Viktor Vafeiadis <viktor@mpi-sws.org>
Signed-off-by: Jonas Oberhauser <jonas.oberhauser@huawei.com>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Viktor (as relayed by Jonas) has pointed out a weakness in the Linux
Kernel Memory Model. Namely, the memory ordering properties of atomic
operations are not monotonic: An atomic op with full-barrier semantics
does not always provide ordering as strong as one with release-barrier
semantics.
The following litmus test illustrates the problem:
--------------------------------------------------
C atomics-not-monotonic
{}
P0(int *x, atomic_t *y)
{
WRITE_ONCE(*x, 1);
smp_wmb();
atomic_set(y, 1);
}
P1(atomic_t *y)
{
int r1;
r1 = atomic_inc_return(y);
}
P2(int *x, atomic_t *y)
{
int r2;
int r3;
r2 = atomic_read(y);
smp_rmb();
r3 = READ_ONCE(*x);
}
exists (2:r2=2 /\ 2:r3=0)
--------------------------------------------------
The litmus test is allowed as shown with atomic_inc_return(), which
has full-barrier semantics. But if the operation is changed to
atomic_inc_return_release(), which only has release-barrier semantics,
the litmus test is forbidden. Clearly this violates monotonicity.
The reason is because the LKMM treats full-barrier atomic ops as if
they were written:
mb();
load();
store();
mb();
(where the load() and store() are the two parts of an atomic RMW op),
whereas it treats release-barrier atomic ops as if they were written:
load();
release_barrier();
store();
The difference is that here the release barrier orders the load part
of the atomic op before the store part with A-cumulativity, whereas
the mb()'s above do not. This means that release-barrier atomics can
effectively extend the cumul-fence relation but full-barrier atomics
cannot.
To resolve this problem we introduce the rmw-sequence relation,
representing an arbitrarily long sequence of atomic RMW operations in
which each operation reads from the previous one, and explicitly allow
it to extend cumul-fence. This modification of the memory model is
sound; it holds for PPC because of B-cumulativity, it holds for TSO
and ARM64 because of other-multicopy atomicity, and we can assume that
atomic ops on all other architectures will be implemented so as to
make it hold for them.
For similar reasons we also allow rmw-sequence to extend the
w-post-bounded relation, which is analogous to cumul-fence in some
ways.
Reported-by: Viktor Vafeiadis <viktor@mpi-sws.org>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reviewed-by: Jonas Oberhauser <jonas.oberhauser@huawei.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
The current informal control dependency definition in explanation.txt is
too broad and, as discussed, needs to be updated.
Consider the following example:
> if(READ_ONCE(x))
> return 42;
>
> WRITE_ONCE(y, 42);
>
> return 21;
The read event determines whether the write event will be executed "at all"
- as per the current definition - but the formal LKMM does not recognize
this as a control dependency.
Introduce a new definition which includes the requirement for the second
memory access event to syntactically lie within the arm of a non-loop
conditional.
Link: https://lore.kernel.org/all/20220615114330.2573952-1-paul.heidekrueger@in.tum.de/
Cc: Marco Elver <elver@google.com>
Cc: Charalampos Mainas <charalampos.mainas@gmail.com>
Cc: Pramod Bhatotia <pramod.bhatotia@in.tum.de>
Cc: Soham Chakraborty <s.s.chakraborty@tudelft.nl>
Cc: Martin Fink <martin.fink@in.tum.de>
Co-developed-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Paul Heidekrüger <paul.heidekrueger@in.tum.de>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
As discussed, clarify LKMM not recognizing certain kinds of orderings.
In particular, highlight the fact that LKMM might deliberately make
weaker guarantees than compilers and architectures.
[ paulmck: Fix whitespace issue noted by checkpatch.pl. ]
Link: https://lore.kernel.org/all/YpoW1deb%2FQeeszO1@ethstick13.dse.in.tum.de/T/#u
Co-developed-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Paul Heidekrüger <paul.heidekrueger@in.tum.de>
Reviewed-by: Marco Elver <elver@google.com>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: Charalampos Mainas <charalampos.mainas@gmail.com>
Cc: Pramod Bhatotia <pramod.bhatotia@in.tum.de>
Cc: Soham Chakraborty <s.s.chakraborty@tudelft.nl>
Cc: Martin Fink <martin.fink@in.tum.de>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
EXPORT_SYMBOL of do_exec() was removed in v5.17. Unfortunately,
kernel modules from klitmus7 7.56 have do_exec() at the end of
each kthread.
herdtools7 7.56.1 has addressed the issue.
Update the compatibility table accordingly.
Signed-off-by: Akira Yokosawa <akiyks@gmail.com>
Cc: Luc Maranget <luc.maranget@inria.fr>
Cc: Jade Alglave <j.alglave@ucl.ac.uk>
Cc: stable@vger.kernel.org # v5.17+
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Paul Heidekrüger pointed out that the Linux Kernel Memory Model
documentation doesn't mention the distinction between syntactic and
semantic dependencies. This is an important difference, because the
compiler can easily break dependencies that are only syntactic, not
semantic.
This patch adds a few paragraphs to the LKMM documentation explaining
these issues and illustrating how they can matter.
Suggested-by: Paul Heidekrüger <paul.heidekrueger@in.tum.de>
Reviewed-by: Akira Yokosawa <akiyks@gmail.com>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
The memory model has been updated to provide a stronger ordering
guarantee for unlock(A)+lock(B) on the same CPU/thread. Therefore add
two litmus tests describing this new guarantee, these tests are simple
yet can clearly show the usage of the new guarantee, also they can serve
as the self tests for the modification in the model.
Co-developed-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
It's better that we have some "standard" about which test should be put
in the litmus-tests directory because it helps future contributors
understand whether they should work on litmus-tests in kernel or Paul's
GitHub repo. Therefore explain a little bit on what a "representative"
litmus test is.
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
A recent discussion[1] shows that we are in favor of strengthening the
ordering of unlock + lock on the same CPU: a unlock and a po-after lock
should provide the so-called RCtso ordering, that is a memory access S
po-before the unlock should be ordered against a memory access R
po-after the lock, unless S is a store and R is a load.
The strengthening meets programmers' expection that "sequence of two
locked regions to be ordered wrt each other" (from Linus), and can
reduce the mental burden when using locks. Therefore add it in LKMM.
[1]: https://lore.kernel.org/lkml/20210909185937.GA12379@rowland.harvard.edu/
Co-developed-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Acked-by: Palmer Dabbelt <palmerdabbelt@google.com> (RISC-V)
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
It is possible to cause KCSAN to ignore marked accesses by applying
__no_kcsan to the function or applying data_race() to the marked accesses.
These approaches allow the developer to restrict compiler optimizations
while also causing KCSAN to ignore diagnostic accesses.
This commit therefore updates the documentation accordingly.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Data loaded for use by some sorts of heuristics can tolerate the
occasional erroneous value. In this case the loads may use data_race()
to give the compiler full freedom to optimize while also informing KCSAN
of the intent. However, for this to work, the heuristic needs to be
able to tolerate any erroneous value that could possibly arise. This
commit therefore adds a paragraph spelling this out.
Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
This commit adds example code for heuristic lockless reads, based loosely
on the sem_lock() and sem_unlock() functions.
[ paulmck: Apply Alan Stern and Manfred Spraul feedback. ]
Reported-by: Manfred Spraul <manfred@colorfullife.com>
[ paulmck: Update per Manfred Spraul and Hillf Danton feedback. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
The current definition of read_foo_diagnostic() in the "Lock Protection
With Lockless Diagnostic Access" section returns a value, which could
be use for any purpose. This could mislead people into incorrectly
using data_race() in cases where READ_ONCE() is required. This commit
therefore makes read_foo_diagnostic() simply print the value read.
Reported-by: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
A misspelled git-grep regex revealed that smp_mb__after_spinlock()
was misspelled in explanation.txt. This commit adds the missing "_".
Fixes: 1c27b644c0fd ("Automate memory-barriers.txt; provide Linux-kernel memory model")
[ paulmck: Apply Alan Stern commit-log feedback. ]
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
This commit adapts the "Concurrency bugs should fear the big bad data-race
detector (part 2)" LWN article (https://lwn.net/Articles/816854/)
to kernel-documentation form. This allows more easily updating the
material as needed.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
[ paulmck: Apply Marco Elver feedback. ]
[ paulmck: Update per Akira Yokosawa feedback. ]
Reviewed-by: Marco Elver <elver@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
atomic_ops.rst was removed by commit f0400a77ebdc ("atomic: Delete
obsolete documentation").
Remove the broken link in tools/memory-model/Documentation/simple.txt.
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Akira Yokosawa <akiyks@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Changeset b00aedf978aa ("doc: Convert to rcu_dereference.txt to rcu_dereference.rst")
renamed: Documentation/RCU/rcu_dereference.txt
to: Documentation/RCU/rcu_dereference.rst.
Update its cross-reference accordingly.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
klitmus7 of herdtools7 7.48 or earlier depends on ACCESS_ONCE(),
which was removed in Linux v4.15.
Fix the obvious typo in the table.
Fixes: d075a78a5ab1 ("tools/memory-model/README: Expand dependency of klitmus7")
Signed-off-by: Akira Yokosawa <akiyks@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
This is a revert of commit 1947bfcf81a9 ("tools/memory-model: Add types
to litmus tests") with conflict resolutions.
klitmus7 [1] is aware of default types of "int" and "int*".
It accepts litmus tests for herd7 without extra type info unless
non-"int" variables are referenced by an "exists", "locations",
or "filter" directive.
[1]: Tested with klitmus7 versions 7.49 or later.
Suggested-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Akira Yokosawa <akiyks@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
This commit explicitly makes the connection between acquire loads and
the reads-from relation. It also adds an entry for happens-before,
and refers to the corresponding section of explanation.txt.
Reported-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
This commit adds comments that label the MP tests' producer and consumer
processes, and also that label the "exists" clause as the bad outcome.
Reported-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
The use of "x" and "y" for message-passing tests is fine for people
familiar with memory models and litmus-test nomenclature, but is a bit
obtuse for others. This commit therefore substitutes "buf" for "x" and
"flag" for "y" for the MP tests. There are a few special-case MP tests
that use locks and these are unchanged. There is another MP test that
uses pointers, and this is changed to name the pointer "p".
Reported-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
This commit adds type information for global variables in the litmus
tests in order to allow easier use with klitmus7.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
[ paulmck: Apply Alan Stern feedback. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
The Linux kernel has a number of categories of ordering primitives, which
are recorded in the LKMM implementation and hinted at by cheatsheet.txt.
But there is no overview of these categories, and such an overview
is needed in order to understand multithreaded LKMM litmus tests.
This commit therefore adds an ordering.txt as well as extracting a
control-dependencies.txt from memory-barriers.txt. It also updates the
README file.
[ paulmck: Apply Akira Yokosawa file-placement feedback. ]
[ paulmck: Apply Alan Stern feedback. ]
[ paulmck: Apply self-review feedback. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
This commit moves the descriptions of the files residing in
tools/memory-model/Documentation to a README file in that directory,
leaving behind the description of tools/memory-model/Documentation/README
itself. After this change, tools/memory-model/Documentation/README
provides a guide to the files in the tools/memory-model/Documentation
directory, guiding people with different skills and needs to the most
appropriate starting point.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Add a small section to the litmus-tests.txt documentation file for
the Linux Kernel Memory Model explaining that the memory model often
fails to recognize certain control dependencies.
Suggested-by: Akira Yokosawa <akiyks@gmail.com>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
This commit adds a key entry enumerating the various types of relaxed
operations. While in the area, it also renames the relaxed rows.
[ paulmck: Apply Boqun Feng feedback. ]
Acked-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Current LKMM documentation assumes that the reader already understands
concurrency in the Linux kernel, which won't necessarily always be the
case. This commit supplies a simple.txt file that provides a starting
point for someone who is new to concurrency in the Linux kernel.
That said, this file might also useful as a reminder to experienced
developers of simpler approaches to dealing with concurrency.
Link: Link: https://lwn.net/Articles/827180/
[ paulmck: Apply feedback from Joel Fernandes. ]
Co-developed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Co-developed-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
The current LKMM documentation says very little about litmus tests, and
worse yet directs people to the herd7 documentation for more information.
Now, the herd7 documentation is quite voluminous and educational,
but it is intended for people creating and modifying memory models,
not those attempting to use them.
This commit therefore updates README and creates a litmus-tests.txt
file that gives an overview of litmus-test format and describes ways of
modeling various special cases, illustrated with numerous examples.
[ paulmck: Add Alan Stern feedback. ]
[ paulmck: Apply Dave Chinner feedback. ]
[ paulmck: Apply Andrii Nakryiko feedback. ]
[ paulmck: Apply Johannes Weiner feedback. ]
Link: https://lwn.net/Articles/827180/
Reported-by: Dave Chinner <david@fromorbit.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
The expand_to_next_prime() and next_prime_number() functions have moved
from lib/prime_numbers.c to lib/math/prime_numbers.c, so this commit
updates recipes.txt to reflect this change.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
- LKMM updates: mostly documentation changes, but also some new litmus
tests for atomic ops.
- KCSAN updates: the most important change is that GCC 11 now has all
fixes in place to support KCSAN, so GCC support can be enabled again.
Also more annotations.
- futex updates: minor cleanups and simplifications
- seqlock updates: merge preparatory changes/cleanups for the
'associated locks' facilities.
- lockdep updates:
- simplify IRQ trace event handling
- add various new debug checks
- simplify header dependencies, split out <linux/lockdep_types.h>,
decouple lockdep from other low level headers some more
- fix NMI handling
- misc cleanups and smaller fixes
* tag 'locking-core-2020-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (60 commits)
kcsan: Improve IRQ state trace reporting
lockdep: Refactor IRQ trace events fields into struct
seqlock: lockdep assert non-preemptibility on seqcount_t write
lockdep: Add preemption enabled/disabled assertion APIs
seqlock: Implement raw_seqcount_begin() in terms of raw_read_seqcount()
seqlock: Add kernel-doc for seqcount_t and seqlock_t APIs
seqlock: Reorder seqcount_t and seqlock_t API definitions
seqlock: seqcount_t latch: End read sections with read_seqcount_retry()
seqlock: Properly format kernel-doc code samples
Documentation: locking: Describe seqlock design and usage
locking/qspinlock: Do not include atomic.h from qspinlock_types.h
locking/atomic: Move ATOMIC_INIT into linux/types.h
lockdep: Move list.h inclusion into lockdep.h
locking/lockdep: Fix TRACE_IRQFLAGS vs. NMIs
futex: Remove unused or redundant includes
futex: Consistently use fshared as boolean
futex: Remove needless goto's
futex: Remove put_futex_key()
rwsem: fix commas in initialisation
docs: locking: Replace HTTP links with HTTPS ones
...
|
|
smp_read_barrier_depends() has gone the way of mmiowb() and so many
esoteric memory barriers before it. Drop the two mentions of this
deceased barrier from the LKMM informal explanation document.
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
herdtools7 7.56 is going to be released in the week of 22 Jun 2020.
This commit therefore adds the exact version in the compatibility table.
Acked-by: Andrea Parri <parri.andrea@gmail.com>
Signed-off-by: Akira Yokosawa <akiyks@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
klitmus7 is independent of the memory model but depends on the
build-target kernel release.
It occasionally lost compatibility due to kernel API changes [1, 2, 3].
It was remedied in a backwards-compatible manner respectively [4, 5, 6].
Reflect this fact in README.
[1]: b899a850431e ("compiler.h: Remove ACCESS_ONCE()")
[2]: 0bb95f80a38f ("Makefile: Globally enable VLA warning")
[3]: d56c0d45f0e2 ("proc: decouple proc from VFS with "struct proc_ops"")
[4]: https://github.com/herd/herdtools7/commit/e87d7f9287d1
("klitmus: Use WRITE_ONCE and READ_ONCE in place of deprecated ACCESS_ONCE")
[5]: https://github.com/herd/herdtools7/commit/a0cbb10d02be
("klitmus: Avoid variable length array")
[6]: https://github.com/herd/herdtools7/commit/46b9412d3a58
("klitmus: Linux kernel v5.6.x compat")
NOTE: [5] was ahead of herdtools7 7.53, which did not make an
official release. Code generated by klitmus7 without [5] can still be
built targeting Linux 4.20--5.5 if you don't care VLA warnings.
Acked-by: Andrea Parri <parri.andrea@gmail.com>
Signed-off-by: Akira Yokosawa <akiyks@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
The name of litmus test doesn't match the one described below.
Fix the name of litmus test.
Acked-by: Andrea Parri <parri.andrea@gmail.com>
Acked-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Akira Yokosawa <akiyks@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
According to Luc, atomic_add_unless() is directly provided by herd7,
therefore it can be used in litmus tests. So change the limitation
section in README to unlimit the use of atomic_add_unless().
Cc: Luc Maranget <luc.maranget@inria.fr>
Acked-by: Andrea Parri <parri.andrea@gmail.com>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
The definition of "conflict" should not include the type of access nor
whether the accesses are concurrent or not, which this patch addresses.
The definition of "data race" remains unchanged.
The definition of "conflict" as we know it and is cited by various
papers on memory consistency models appeared in [1]: "Two accesses to
the same variable conflict if at least one is a write; two operations
conflict if they execute conflicting accesses."
The LKMM as well as the C11 memory model are adaptations of
data-race-free, which are based on the work in [2]. Necessarily, we need
both conflicting data operations (plain) and synchronization operations
(marked). For example, C11's definition is based on [3], which defines a
"data race" as: "Two memory operations conflict if they access the same
memory location, and at least one of them is a store, atomic store, or
atomic read-modify-write operation. In a sequentially consistent
execution, two memory operations from different threads form a type 1
data race if they conflict, at least one of them is a data operation,
and they are adjacent in <T (i.e., they may be executed concurrently)."
[1] D. Shasha, M. Snir, "Efficient and Correct Execution of Parallel
Programs that Share Memory", 1988.
URL: http://snir.cs.illinois.edu/listed/J21.pdf
[2] S. Adve, "Designing Memory Consistency Models for Shared-Memory
Multiprocessors", 1993.
URL: http://sadve.cs.illinois.edu/Publications/thesis.pdf
[3] H.-J. Boehm, S. Adve, "Foundations of the C++ Concurrency Memory
Model", 2008.
URL: https://www.hpl.hp.com/techreports/2008/HPL-2008-56.pdf
Signed-off-by: Marco Elver <elver@google.com>
Co-developed-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Andrea Parri <parri.andrea@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
This commit updates the list of LKMM-related publications in
Documentation/references.txt.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Acked-by: Andrea Parri <parri.andrea@gmail.com>
|
|
Add SPDX License Identifier to all .gitignore files.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
explanation.txt
This patch updates the Linux Kernel Memory Model's explanation.txt
file by adding a section devoted to the model's handling of plain
accesses and data-race detection.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Andrea Parri <parri.andrea@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
explanation.txt
This patch updates the Linux Kernel Memory Model's explanation.txt
file to incorporate the introduction of the rcu-order relation and
the redefinition of rcu-fence made by commit 15aa25cbf0cc
("tools/memory-model: Change definition of rcu-fence").
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Andrea Parri <parri.andrea@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
This patch fixes a few minor typos and improves word usage in a few
places in the Linux Kernel Memory Model's explanation.txt file.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Acked-by: Andrea Parri <parri.andrea@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Currently the Linux Kernel Memory Model gives an incorrect response
for the following litmus test:
C plain-WWC
{}
P0(int *x)
{
WRITE_ONCE(*x, 2);
}
P1(int *x, int *y)
{
int r1;
int r2;
int r3;
r1 = READ_ONCE(*x);
if (r1 == 2) {
smp_rmb();
r2 = *x;
}
smp_rmb();
r3 = READ_ONCE(*x);
WRITE_ONCE(*y, r3 - 1);
}
P2(int *x, int *y)
{
int r4;
r4 = READ_ONCE(*y);
if (r4 > 0)
WRITE_ONCE(*x, 1);
}
exists (x=2 /\ 1:r2=2 /\ 2:r4=1)
The memory model says that the plain read of *x in P1 races with the
WRITE_ONCE(*x) in P2.
The problem is that we have a write W and a read R related by neither
fre or rfe, but rather W ->coe W' ->rfe R, where W' is an intermediate
write (the WRITE_ONCE() in P0). In this situation there is no
particular ordering between W and R, so either a wr-vis link from W to
R or an rw-xbstar link from R to W would prove that the accesses
aren't concurrent.
But the LKMM only looks for a wr-vis link, which is equivalent to
assuming that W must execute before R. This is not necessarily true
on non-multicopy-atomic systems, as the WWC pattern demonstrates.
This patch changes the LKMM to accept either a wr-vis or a reverse
rw-xbstar link as a proof of non-concurrency.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Andrea Parri <parri.andrea@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
The formal memory consistency model has added support for plain accesses
(and data races). While updating the informal documentation to describe
this addition to the model is highly desirable and important future work,
update the informal documentation to at least acknowledge such addition.
Signed-off-by: Andrea Parri <andrea.parri@amarulasolutions.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Jade Alglave <j.alglave@ucl.ac.uk>
Cc: Luc Maranget <luc.maranget@inria.fr>
Cc: "Paul E. McKenney" <paulmck@linux.ibm.com>
Cc: Akira Yokosawa <akiyks@gmail.com>
Cc: Daniel Lustig <dlustig@nvidia.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
|
|
To reduce ambiguity in the more exotic ->prop ordering example, this
commit uses the term cumul-fence instead of the term fence for the two
fences, so that the implict ->rfe on loads/stores to Y are covered by
the description.
Link: https://lore.kernel.org/lkml/20190729121745.GA140682@google.com
Suggested-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
|
|
This commit simplifies life a bit by making all of the scripts in
tools/memory-model/scripts be executable.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
|
|
Herbert Xu recently reported a problem concerning RCU and compiler
barriers. In the course of discussing the problem, he put forth a
litmus test which illustrated a serious defect in the Linux Kernel
Memory Model's data-race-detection code [1].
The defect was that the LKMM assumed visibility and executes-before
ordering of plain accesses had to be mediated by marked accesses. In
Herbert's litmus test this wasn't so, and the LKMM claimed the litmus
test was allowed and contained a data race although neither is true.
In fact, plain accesses can be ordered by fences even in the absence
of marked accesses. In most cases this doesn't matter, because most
fences only order accesses within a single thread. But the rcu-fence
relation is different; it can order (and induce visibility between)
accesses in different threads -- events which otherwise might be
concurrent. This makes it relevant to data-race detection.
This patch makes two changes to the memory model to incorporate the
new insight:
If a store is separated by a fence from another access,
the store is necessarily visible to the other access (as
reflected in the ww-vis and wr-vis relations). Similarly,
if a load is separated by a fence from another access then
the load necessarily executes before the other access (as
reflected in the rw-xbstar relation).
If a store is separated by a strong fence from a marked access
then it is necessarily visible to any access that executes
after the marked access (as reflected in the ww-vis and wr-vis
relations).
With these changes, the LKMM gives the desired result for Herbert's
litmus test and other related ones [2].
[1] https://lore.kernel.org/lkml/Pine.LNX.4.44L0.1906041026570.1731-100000@iolanthe.rowland.org/
[2] https://github.com/paulmckrcu/litmus/blob/master/manual/plain/C-S-rcunoderef-1.litmus
https://github.com/paulmckrcu/litmus/blob/master/manual/plain/C-S-rcunoderef-2.litmus
https://github.com/paulmckrcu/litmus/blob/master/manual/plain/C-S-rcunoderef-3.litmus
https://github.com/paulmckrcu/litmus/blob/master/manual/plain/C-S-rcunoderef-4.litmus
https://github.com/paulmckrcu/litmus/blob/master/manual/plain/strong-vis.litmus
Reported-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Andrea Parri <andrea.parri@amarulasolutions.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Tested-by: Akira Yokosawa <akiyks@gmail.com>
|
|
The rcu-fence relation in the Linux Kernel Memory Model is not well
named. It doesn't act like any other fence relation, in that it does
not relate events before a fence to events after that fence. All it
does is relate certain RCU events to one another (those that are
ordered by the RCU Guarantee); this induces an actual
strong-fence-like relation linking events preceding the first RCU
event to those following the second.
This patch renames rcu-fence, now called rcu-order. It adds a new
definition of rcu-fence, something which should have been present all
along because it is used in the rb relation. And it modifies the
fence and strong-fence relations by making them incorporate the new
rcu-fence.
As a result of this change, there is no longer any need to define
full-fence in the section for detecting data races. It can simply be
replaced by the updated strong-fence relation.
This change should have no effect on the operation of the memory model.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Andrea Parri <andrea.parri@amarulasolutions.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
|
Jonas Oberhauser
Alan Stern
Paul Heidekrüger
Akira Yokosawa
Boqun Feng
Paul E. McKenney
Manfred Spraul
Björn Töpel
Mauro Carvalho Chehab
Alexander A. Klimov
Linus Torvalds
Will Deacon
Marco Elver
Masahiro Yamada
Andrea Parri
Joel Fernandes (Google)
Paul E. McKenney
