Age | Commit message (Collapse) | Author | Files | Lines |
|
When compiler emits endbr insn the function address could
be different than what bpf_get_func_ip() reports.
This is a short term workaround.
bpf_get_func_ip() will be fixed later.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
When test_lirc_mode2_user exec failed, the test report failed but still
exit with 0. Fix it by exiting with an error code.
Another issue is for the LIRCDEV checking. With bash -n, we need to quote
the variable, or it will always be true. So if test_lirc_mode2_user was
not run, just exit with skip code.
Fixes: 6bdd533cee9a ("bpf: add selftest for lirc_mode2 type program")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220321024149.157861-1-liuhangbin@gmail.com
|
|
Add a test case for stacktrace with skip > 0 using a small sized
buffer. It didn't support skipping entries greater than or equal to
the size of buffer and filled the skipped part with 0.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220314182042.71025-2-namhyung@kernel.org
|
|
The context access converter rewrites the 4-byte load from
bpf_sk_lookup->remote_port to a 2-byte load from bpf_sk_lookup_kern
structure.
It means that we cannot treat the destination register contents as a 32-bit
value, or the code will not be portable across big- and little-endian
architectures.
This is exactly the same case as with 4-byte loads from bpf_sock->dst_port
so follow the approach outlined in [1] and treat the register contents as a
16-bit value in the test.
[1]: https://lore.kernel.org/bpf/20220317113920.1068535-5-jakub@cloudflare.com/
Fixes: 2ed0dc5937d3 ("selftests/bpf: Cover 4-byte load from remote_port in bpf_sk_lookup")
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20220319183356.233666-4-jakub@cloudflare.com
|
|
In commit 9a69e2b385f4 ("bpf: Make remote_port field in struct
bpf_sk_lookup 16-bit wide") ->remote_port field changed from __u32 to
__be16.
However, narrow load tests which exercise 1-byte sized loads from
offsetof(struct bpf_sk_lookup, remote_port) were not adopted to reflect the
change.
As a result, on little-endian we continue testing loads from addresses:
- (__u8 *)&ctx->remote_port + 3
- (__u8 *)&ctx->remote_port + 4
which map to the zero padding following the remote_port field, and don't
break the tests because there is no observable change.
While on big-endian, we observe breakage because tests expect to see zeros
for values loaded from:
- (__u8 *)&ctx->remote_port - 1
- (__u8 *)&ctx->remote_port - 2
Above addresses map to ->remote_ip6 field, which precedes ->remote_port,
and are populated during the bpf_sk_lookup IPv6 tests.
Unsurprisingly, on s390x we observe:
#136/38 sk_lookup/narrow access to ctx v4:OK
#136/39 sk_lookup/narrow access to ctx v6:FAIL
Fix it by removing the checks for 1-byte loads from offsets outside of the
->remote_port field.
Fixes: 9a69e2b385f4 ("bpf: Make remote_port field in struct bpf_sk_lookup 16-bit wide")
Suggested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20220319183356.233666-3-jakub@cloudflare.com
|
|
This patch adds a few calls to the existing local storage selftest to
test that we can associate multiple elements with the local storage.
The sleepable program's call to bpf_sk_storage_get with sk_storage_map2
will lead to an allocation of a new selem under the GFP_KERNEL flag.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220318045553.3091807-3-joannekoong@fb.com
|
|
The check for 4-byte load from dst_port offset into bpf_sock is failing on
big-endian architecture - s390. The bpf access converter rewrites the
4-byte load to a 2-byte load from sock_common at skc_dport offset, as shown
below.
* s390 / llvm-objdump -S --no-show-raw-insn
00000000000002a0 <sk_dst_port__load_word>:
84: r1 = *(u32 *)(r1 + 48)
85: w0 = 1
86: if w1 == 51966 goto +1 <LBB5_2>
87: w0 = 0
00000000000002c0 <LBB5_2>:
88: exit
* s390 / bpftool prog dump xlated
_Bool sk_dst_port__load_word(struct bpf_sock * sk):
35: (69) r1 = *(u16 *)(r1 +12)
36: (bc) w1 = w1
37: (b4) w0 = 1
38: (16) if w1 == 0xcafe goto pc+1
39: (b4) w0 = 0
40: (95) exit
* x86_64 / llvm-objdump -S --no-show-raw-insn
00000000000002a0 <sk_dst_port__load_word>:
84: r1 = *(u32 *)(r1 + 48)
85: w0 = 1
86: if w1 == 65226 goto +1 <LBB5_2>
87: w0 = 0
00000000000002c0 <LBB5_2>:
88: exit
* x86_64 / bpftool prog dump xlated
_Bool sk_dst_port__load_word(struct bpf_sock * sk):
33: (69) r1 = *(u16 *)(r1 +12)
34: (b4) w0 = 1
35: (16) if w1 == 0xfeca goto pc+1
36: (b4) w0 = 0
37: (95) exit
This leads to surprises if we treat the destination register contents as a
32-bit value, ignoring the fact that in reality it contains a 16-bit value.
On little-endian the register contents reflect the bpf_sock struct
definition, where the lower 16-bits contain the port number:
struct bpf_sock {
...
__be16 dst_port; /* offset 48 */
__u16 :16;
...
};
However, on big-endian the register contents suggest that field the layout
of bpf_sock struct is as so:
struct bpf_sock {
...
__u16 :16; /* offset 48 */
__be16 dst_port;
...
};
Account for this quirky access conversion in the test case exercising the
4-byte load by treating the result as 16-bit wide.
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20220317113920.1068535-5-jakub@cloudflare.com
|
|
Replace magic numbers in BPF code with constants from bpf.h, so that they
don't require an explanation in the comments.
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20220317113920.1068535-4-jakub@cloudflare.com
|
|
cgroup_skb/egress programs which sock_fields test installs process packets
flying in both directions, from the client to the server, and in reverse
direction.
Recently added dst_port check relies on the fact that destination
port (remote peer port) of the socket which sends the packet is known ahead
of time. This holds true only for the client socket, which connects to the
known server port.
Filter out any traffic that is not egressing from the client socket in the
BPF program that tests reading the dst_port.
Fixes: 8f50f16ff39d ("selftests/bpf: Extend verifier and bpf_sock tests for dst_port loads")
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20220317113920.1068535-3-jakub@cloudflare.com
|
|
The helper macro that records an error in BPF programs that exercise sock
fields access has been inadvertently broken by adaptation work that
happened in commit b18c1f0aa477 ("bpf: selftest: Adapt sock_fields test to
use skel and global variables").
BPF_NOEXIST flag cannot be used to update BPF_MAP_TYPE_ARRAY. The operation
always fails with -EEXIST, which in turn means the error never gets
recorded, and the checks for errors always pass.
Revert the change in update flags.
Fixes: b18c1f0aa477 ("bpf: selftest: Adapt sock_fields test to use skel and global variables")
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20220317113920.1068535-2-jakub@cloudflare.com
|
|
This patch changes the selftests/bpf Makefile to also generate
a subskel.h for every skel.h it would have normally generated.
Separately, it also introduces a new subskeleton test which tests
library objects, externs, weak symbols, kconfigs, and user maps.
Signed-off-by: Delyan Kratunov <delyank@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/1bd24956940bbbfe169bb34f7f87b11df52ef011.1647473511.git.delyank@fb.com
|
|
Adding bpf_cookie test for programs attached by
bpf_program__attach_kprobe_multi_opts API.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220316122419.933957-14-jolsa@kernel.org
|
|
Adding tests for bpf_program__attach_kprobe_multi_opts function,
that test attach with pattern, symbols and addrs.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220316122419.933957-13-jolsa@kernel.org
|
|
Adding bpf_cookie test for programs attached by kprobe_multi links.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220316122419.933957-12-jolsa@kernel.org
|
|
Adding kprobe_multi attach test that uses new fprobe interface to
attach kprobe program to multiple functions.
The test is attaching programs to bpf_fentry_test* functions and
uses single trampoline program bpf_prog_test_run to trigger
bpf_fentry_test* functions.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220316122419.933957-11-jolsa@kernel.org
|
|
In namespace at_ns0, the IP address of tnl dev is 10.1.1.100 which is the
overlay IP, and the ip address of veth0 is 172.16.1.100 which is the vtep
IP. When doing 'ping 10.1.1.100' from root namespace, the remote_ip should
be 172.16.1.100.
Fixes: 933a741e3b82 ("selftests/bpf: bpf tunnel test.")
Signed-off-by: Kaixi Fan <fankaixi.li@bytedance.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20220313164116.5889-1-fankaixi.li@bytedance.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
When bpf_jit_harden is toggled between 0 and 2, subprog jit may fail
due to inconsistent twice read values of bpf_jit_harden during jit. So
add a test to ensure the problem is fixed.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220309123321.2400262-5-houtao1@huawei.com
|
|
This patch removes the libcap usage from test_progs.
bind_perm.c is the only user. cap_*_effective() helpers added in the
earlier patch are directly used instead.
No other selftest binary is using libcap, so '-lcap' is also removed
from the Makefile.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20220316173835.2039334-1-kafai@fb.com
|
|
This patch removes the libcap usage from test_verifier.
The cap_*_effective() helpers added in the earlier patch are
used instead.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20220316173829.2038682-1-kafai@fb.com
|
|
After upgrading to the newer libcap (>= 2.60),
the libcap commit aca076443591 ("Make cap_t operations thread safe.")
added a "__u8 mutex;" to the "struct _cap_struct". It caused a few byte
shift that breaks the assumption made in the "struct libcap" definition
in test_verifier.c.
The bpf selftest usage only needs to enable and disable the effective
caps of the running task. It is easier to directly syscall the
capget and capset instead. It can also remove the libcap
library dependency.
The cap_helpers.{c,h} is added. One __u64 is used for all CAP_*
bits instead of two __u32.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20220316173823.2036955-1-kafai@fb.com
|
|
Clean up the array_size.cocci warnings under tools/testing/selftests/bpf/:
Use `ARRAY_SIZE(arr)` instead of forms like `sizeof(arr)/sizeof(arr[0])`.
tools/testing/selftests/bpf/test_cgroup_storage.c uses ARRAY_SIZE() defined
in tools/include/linux/kernel.h (sys/sysinfo.h -> linux/kernel.h), while
others use ARRAY_SIZE() in bpf_util.h.
Signed-off-by: Guo Zhengkui <guozhengkui@vivo.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220315130143.2403-1-guozhengkui@vivo.com
|
|
Building selftests/bpf with latest clang compiler (clang15 built
from source), I hit the following compilation error:
/.../prog_tests/send_signal.c:43:16: error: variable 'j' set but not used [-Werror,-Wunused-but-set-variable]
volatile int j = 0;
^
1 error generated.
The problem also exists with clang13 and clang14. clang12 is okay.
In send_signal.c, we have the following code ...
volatile int j = 0;
[...]
for (int i = 0; i < 100000000 && !sigusr1_received; i++)
j /= i + 1;
... to burn CPU cycles so bpf_send_signal() helper can be tested
in NMI mode.
Slightly changing 'j /= i + 1' to 'j /= i + j + 1' or 'j++' can
fix the problem. Further investigation indicated this should be
a clang bug ([1]). The upstream fix will be proposed later. But it
is a good idea to workaround the issue to unblock people who build
kernel/selftests with clang.
[1] https://discourse.llvm.org/t/strange-clang-unused-but-set-variable-error-with-volatile-variables/60841
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220311003721.2177170-1-yhs@fb.com
|
|
This adds an extra test to the xdp_do_redirect selftest for XDP live packet
mode, which verifies that the maximum permissible packet size is accepted
without any errors, and that a too big packet is correctly rejected.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20220310225621.53374-2-toke@redhat.com
|
|
Check that bpf_kernel_read_file() denies the reading of an IMA policy, by
ensuring that ima_setup.sh exits with an error.
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220302111404.193900-10-roberto.sassu@huawei.com
|
|
Test the ability of bpf_lsm_kernel_read_file() to call the sleepable
functions bpf_ima_inode_hash() or bpf_ima_file_hash() to obtain a
measurement of a loaded IMA policy.
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220302111404.193900-9-roberto.sassu@huawei.com
|
|
Verify that bpf_ima_inode_hash() returns a non-fresh digest after a file
write, and that bpf_ima_file_hash() returns a fresh digest. Verification is
done by requesting the digest from the bprm_creds_for_exec hook, called
before ima_bprm_check().
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220302111404.193900-7-roberto.sassu@huawei.com
|
|
Add new test to ensure that bpf_ima_file_hash() returns the digest of the
executed files.
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220302111404.193900-6-roberto.sassu@huawei.com
|
|
Move sample generator code to ima_test_common() so that the new function
can be called by multiple LSM hooks.
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220302111404.193900-5-roberto.sassu@huawei.com
|
|
The previous patch made the follow changes:
- s/delivery_time_type/tstamp_type/
- s/bpf_skb_set_delivery_time/bpf_skb_set_tstamp/
- BPF_SKB_DELIVERY_TIME_* to BPF_SKB_TSTAMP_*
This patch is to change the test_tc_dtime.c to reflect the above.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220309090515.3712742-1-kafai@fb.com
|
|
This adds a selftest for the XDP_REDIRECT facility in BPF_PROG_RUN, that
redirects packets into a veth and counts them using an XDP program on the
other side of the veth pair and a TC program on the local side of the veth.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20220309105346.100053-6-toke@redhat.com
|
|
These will also be used by the xdp_do_redirect test being added in the next
commit.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20220309105346.100053-5-toke@redhat.com
|
|
Remove unneeded spleep and increase length of dummy CPU
intensive computation to guarantee test process execution.
Also, complete aforemention computation as soon as
test success criteria is met
Signed-off-by: Mykola Lysenko <mykolal@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220308200449.1757478-4-mykolal@fb.com
|
|
Substitute sleep with dummy CPU intensive computation.
Finish aforemention computation as soon as signal was
delivered to the test process. Make the BPF code to
only execute when PID global variable is set
Signed-off-by: Mykola Lysenko <mykolal@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220308200449.1757478-3-mykolal@fb.com
|
|
Linux kernel may automatically reduce kernel.perf_event_max_sample_rate
value when running tests in parallel on slow systems. Linux kernel checks
against this limit when opening perf event with freq=1 parameter set.
The lower bound is 1000. This patch reduces sample_freq value to 1000
in all BPF tests that use sample_freq to ensure they always can open
perf event.
Signed-off-by: Mykola Lysenko <mykolal@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220308200449.1757478-2-mykolal@fb.com
|
|
In test_lwt_ip_encap, the ingress IPv6 encap test failed from time to
time. The failure occured when an IPv4 ping through the IPv6 GRE
encapsulation did not receive a reply within the timeout. The IPv4 ping
and the IPv6 ping in the test used different timeouts (1 sec for IPv4
and 6 sec for IPv6), probably taking into account that IPv6 might need
longer to successfully complete. However, when IPv4 pings (with the
short timeout) are encapsulated into the IPv6 tunnel, the delays of IPv6
apply.
The actual reason for the long delays with IPv6 was that the IPv6
neighbor discovery sometimes did not complete in time. This was caused
by the outgoing interface only having a tentative link local address,
i.e., not having completed DAD for that lladdr. The ND was successfully
retried after 1 sec but that was too late for the ping timeout.
The IPv6 addresses for the test were already added with nodad. However,
for the lladdrs, DAD was still performed. We now disable DAD in the test
netns completely and just assume that the two lladdrs on each veth pair
do not collide. This removes all the delays for IPv6 traffic in the
test.
Without the delays, we can now also reduce the delay of the IPv6 ping to
1 sec. This makes the whole test complete faster because we don't need
to wait for the excessive timeout for each IPv6 ping that is supposed
to fail.
Fixes: 0fde56e4385b0 ("selftests: bpf: add test_lwt_ip_encap selftest")
Signed-off-by: Felix Maurer <fmaurer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/4987d549d48b4e316cd5b3936de69c8d4bc75a4f.1646305899.git.fmaurer@redhat.com
|
|
vmtest.sh also supports s390x now.
Signed-off-by: KP Singh <kpsingh@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220307133048.1287644-2-kpsingh@kernel.org
|
|
Dynamic linking when compiling on the host can cause issues when the
libc version does not match the one in the VM image. Update the
docs to explain how to do this.
Before:
./vmtest.sh -- ./test_progs -t test_ima
./test_progs: /usr/lib/libc.so.6: version `GLIBC_2.33' not found (required by ./test_progs)
After:
LDLIBS=-static ./vmtest.sh -- ./test_progs -t test_ima
test_ima:OK
Summary: 1/0 PASSED, 0 SKIPPED, 0 FAILED
Reported-by: "Geyslan G. Bem" <geyslan@gmail.com>
Signed-off-by: KP Singh <kpsingh@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220307133048.1287644-1-kpsingh@kernel.org
|
|
Add test for percpu btf_type_tag. Similar to the "user" tag, we test
the following cases:
1. __percpu struct field.
2. __percpu as function parameter.
3. per_cpu_ptr() accepts dynamically allocated __percpu memory.
Because the test for "user" and the test for "percpu" are very similar,
a little bit of refactoring has been done in btf_tag.c. Basically, both
tests share the same function for loading vmlinux and module btf.
Example output from log:
> ./test_progs -v -t btf_tag
libbpf: prog 'test_percpu1': BPF program load failed: Permission denied
libbpf: prog 'test_percpu1': -- BEGIN PROG LOAD LOG --
...
; g = arg->a;
1: (61) r1 = *(u32 *)(r1 +0)
R1 is ptr_bpf_testmod_btf_type_tag_1 access percpu memory: off=0
...
test_btf_type_tag_mod_percpu:PASS:btf_type_tag_percpu 0 nsec
#26/6 btf_tag/btf_type_tag_percpu_mod1:OK
libbpf: prog 'test_percpu2': BPF program load failed: Permission denied
libbpf: prog 'test_percpu2': -- BEGIN PROG LOAD LOG --
...
; g = arg->p->a;
2: (61) r1 = *(u32 *)(r1 +0)
R1 is ptr_bpf_testmod_btf_type_tag_1 access percpu memory: off=0
...
test_btf_type_tag_mod_percpu:PASS:btf_type_tag_percpu 0 nsec
#26/7 btf_tag/btf_type_tag_percpu_mod2:OK
libbpf: prog 'test_percpu_load': BPF program load failed: Permission denied
libbpf: prog 'test_percpu_load': -- BEGIN PROG LOAD LOG --
...
; g = (__u64)cgrp->rstat_cpu->updated_children;
2: (79) r1 = *(u64 *)(r1 +48)
R1 is ptr_cgroup_rstat_cpu access percpu memory: off=48
...
test_btf_type_tag_vmlinux_percpu:PASS:btf_type_tag_percpu_load 0 nsec
#26/8 btf_tag/btf_type_tag_percpu_vmlinux_load:OK
load_btfs:PASS:could not load vmlinux BTF 0 nsec
test_btf_type_tag_vmlinux_percpu:PASS:btf_type_tag_percpu 0 nsec
test_btf_type_tag_vmlinux_percpu:PASS:btf_type_tag_percpu_helper 0 nsec
#26/9 btf_tag/btf_type_tag_percpu_vmlinux_helper:OK
Signed-off-by: Hao Luo <haoluo@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220304191657.981240-5-haoluo@google.com
|
|
Include a few verifier selftests that test against the problems being
fixed by previous commits, i.e. release kfunc always require
PTR_TO_BTF_ID fixed and var_off to be 0, and negative offset is not
permitted and returns a helpful error message.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220304224645.3677453-9-memxor@gmail.com
|
|
check_ptr_off_reg only allows fixed offset to be set for PTR_TO_BTF_ID,
where reg->off < 0 doesn't make sense. This would shift the pointer
backwards, and fails later in btf_struct_ids_match or btf_struct_walk
due to out of bounds access (since offset is interpreted as unsigned).
Improve the verifier by rejecting this case by using a better error
message for BPF helpers and kfunc, by putting a check inside the
check_func_arg_reg_off function.
Also, update existing verifier selftests to work with new error string.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220304224645.3677453-4-memxor@gmail.com
|
|
Add a selftest validating various aspects of libbpf's handling of custom
SEC() handlers. It also demonstrates how libraries can ensure very early
callbacks registration and unregistration using
__attribute__((constructor))/__attribute__((destructor)) functions.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Tested-by: Alan Maguire <alan.maguire@oracle.com>
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Link: https://lore.kernel.org/bpf/20220305010129.1549719-4-andrii@kernel.org
|
|
Daniel Borkmann says:
====================
pull-request: bpf-next 2022-03-04
We've added 32 non-merge commits during the last 14 day(s) which contain
a total of 59 files changed, 1038 insertions(+), 473 deletions(-).
The main changes are:
1) Optimize BPF stackmap's build_id retrieval by caching last valid build_id,
as consecutive stack frames are likely to be in the same VMA and therefore
have the same build id, from Hao Luo.
2) Several improvements to arm64 BPF JIT, that is, support for JITing
the atomic[64]_fetch_add, atomic[64]_[fetch_]{and,or,xor} and lastly
atomic[64]_{xchg|cmpxchg}. Also fix the BTF line info dump for JITed
programs, from Hou Tao.
3) Optimize generic BPF map batch deletion by only enforcing synchronize_rcu()
barrier once upon return to user space, from Eric Dumazet.
4) For kernel build parse DWARF and generate BTF through pahole with enabled
multithreading, from Kui-Feng Lee.
5) BPF verifier usability improvements by making log info more concise and
replacing inv with scalar type name, from Mykola Lysenko.
6) Two follow-up fixes for BPF prog JIT pack allocator, from Song Liu.
7) Add a new Kconfig to allow for loading kernel modules with non-matching
BTF type info; their BTF info is then removed on load, from Connor O'Brien.
8) Remove reallocarray() usage from bpftool and switch to libbpf_reallocarray()
in order to fix compilation errors for older glibc, from Mauricio Vásquez.
9) Fix libbpf to error on conflicting name in BTF when type declaration
appears before the definition, from Xu Kuohai.
10) Fix issue in BPF preload for in-kernel light skeleton where loaded BPF
program fds prevent init process from setting up fd 0-2, from Yucong Sun.
11) Fix libbpf reuse of pinned perf RB map when max_entries is auto-determined
by libbpf, from Stijn Tintel.
12) Several cleanups for libbpf and a fix to enforce perf RB map #pages to be
non-zero, from Yuntao Wang.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (32 commits)
bpf: Small BPF verifier log improvements
libbpf: Add a check to ensure that page_cnt is non-zero
bpf, x86: Set header->size properly before freeing it
x86: Disable HAVE_ARCH_HUGE_VMALLOC on 32-bit x86
bpf, test_run: Fix overflow in XDP frags bpf_test_finish
selftests/bpf: Update btf_dump case for conflicting names
libbpf: Skip forward declaration when counting duplicated type names
bpf: Add some description about BPF_JIT_ALWAYS_ON in Kconfig
bpf, docs: Add a missing colon in verifier.rst
bpf: Cache the last valid build_id
libbpf: Fix BPF_MAP_TYPE_PERF_EVENT_ARRAY auto-pinning
bpf, selftests: Use raw_tp program for atomic test
bpf, arm64: Support more atomic operations
bpftool: Remove redundant slashes
bpf: Add config to allow loading modules with BTF mismatches
bpf, arm64: Feed byte-offset into bpf line info
bpf, arm64: Call build_prologue() first in first JIT pass
bpf: Fix issue with bpf preload module taking over stdout/stdin of kernel.
bpftool: Bpf skeletons assert type sizes
bpf: Cleanup comments
...
====================
Link: https://lore.kernel.org/r/20220304164313.31675-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In particular these include:
1) Remove output of inv for scalars in print_verifier_state
2) Replace inv with scalar in verifier error messages
3) Remove _value suffixes for umin/umax/s32_min/etc (except map_value)
4) Remove output of id=0
5) Remove output of ref_obj_id=0
Signed-off-by: Mykola Lysenko <mykolal@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220301222745.1667206-1-mykolal@fb.com
|
|
This patch adds tests on forwarding the delivery_time for
the following cases
- tcp/udp + ip4/ip6 + bpf_redirect_neigh
- tcp/udp + ip4/ip6 + ip[6]_forward
- bpf_skb_set_delivery_time
- The old rcv timestamp expectation on tc-bpf@ingress
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Update btf_dump case for conflicting names caused by forward declaration.
Signed-off-by: Xu Kuohai <xukuohai@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20220301053250.1464204-3-xukuohai@huawei.com
|
|
Now atomic tests will attach fentry program and run it through
bpf_prog_test_run_opts(), but attaching fentry program depends on BPF
trampoline which is only available under x86-64. Considering many archs
have atomic support, using raw_tp program instead.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220217072232.1186625-5-houtao1@huawei.com
|
|
This test tries to pass a PTR_TO_BTF_ID_OR_NULL to the release function,
which would trigger a out of bounds access without the fix in commit
45ce4b4f9009 ("bpf: Fix crash due to out of bounds access into reg2btf_ids.")
but after the fix, it should only index using base_type(reg->type),
which should be less than __BPF_REG_TYPE_MAX, and also not permit any
type flags to be set for the reg->type.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220220023138.2224652-1-memxor@gmail.com
|
|
There turned out to be a few problems with btfgen selftests.
First, core_btfgen tests are failing in BPF CI due to the use of
full-featured bpftool, which has extra dependencies on libbfd, libcap,
etc, which are present in BPF CI's build environment, but those shared
libraries are missing in QEMU image in which test_progs is running.
To fix this problem, use minimal bootstrap version of bpftool instead.
It only depend on libelf and libz, same as libbpf, so doesn't add any
new requirements (and bootstrap bpftool still implementes entire
`bpftool gen` functionality, which is quite convenient).
Second problem is even more interesting. Both core_btfgen and core_reloc
reuse the same set of struct core_reloc_test_case array of test case
definitions. That in itself is not a problem, but btfgen test replaces
test_case->btf_src_file property with the path to temporary file into
which minimized BTF is output by bpftool. This interferes with original
core_reloc tests, depending on order of tests execution (core_btfgen is
run first in sequential mode and skrews up subsequent core_reloc run by
pointing to already deleted temporary file, instead of the original BTF
files) and whether those two runs share the same process (in parallel
mode the chances are high for them to run in two separate processes and
so not interfere with each other).
To prevent this interference, create and use local copy of a test
definition. Mark original array as constant to catch accidental
modifcations. Note that setup_type_id_case_success() and
setup_type_id_case_success() still modify common test_case->output
memory area, but it is ok as each setup function has to re-initialize it
completely anyways. In sequential mode it leads to deterministic and
correct initialization. In parallel mode they will either each have
their own process, or if core_reloc and core_btfgen happen to be run by
the same worker process, they will still do that sequentially within the
worker process. If they are sharded across multiple processes, they
don't really share anything anyways.
Also, rename core_btfgen into core_reloc_btfgen, as it is indeed just
a "flavor" of core_reloc test, not an independent set of tests. So make
it more obvious.
Last problem that needed solving was that location of bpftool differs
between test_progs and test_progs' flavors (e.g., test_progs-no_alu32).
To keep it simple, create a symlink to bpftool both inside
selftests/bpf/ directory and selftests/bpf/<flavor> subdirectory. That
way, from inside core_reloc test, location to bpftool is just "./bpftool".
v2->v3:
- fix bpftool location relative the test_progs-no_alu32;
v1->v2:
- fix corruption of core_reloc_test_case.
Fixes: 704c91e59fe0 ("selftests/bpf: Test "bpftool gen min_core_btf")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yucong Sun <sunyucong@gmail.com>
Link: https://lore.kernel.org/bpf/20220220042720.3336684-1-andrii@kernel.org
|
|
Build the kernel and selftest with clang compiler with LLVM=1,
make -j LLVM=1
make -C tools/testing/selftests/bpf -j LLVM=1
I hit the following selftests/bpf compilation error:
In file included from test_cpp.cpp:3:
/.../tools/testing/selftests/bpf/tools/include/bpf/libbpf.h:73:8:
error: 'relaxed_core_relocs' is deprecated: libbpf v0.6+: field has no effect [-Werror,-Wdeprecated-declarations]
struct bpf_object_open_opts {
^
test_cpp.cpp:56:2: note: in implicit move constructor for 'bpf_object_open_opts' first required here
LIBBPF_OPTS(bpf_object_open_opts, opts);
^
/.../tools/testing/selftests/bpf/tools/include/bpf/libbpf_common.h:77:3: note: expanded from macro 'LIBBPF_OPTS'
(struct TYPE) { \
^
/.../tools/testing/selftests/bpf/tools/include/bpf/libbpf.h:90:2: note: 'relaxed_core_relocs' has been explicitly marked deprecated here
LIBBPF_DEPRECATED_SINCE(0, 6, "field has no effect")
^
/.../tools/testing/selftests/bpf/tools/include/bpf/libbpf_common.h:24:4: note: expanded from macro 'LIBBPF_DEPRECATED_SINCE'
(LIBBPF_DEPRECATED("libbpf v" # major "." # minor "+: " msg))
^
/.../tools/testing/selftests/bpf/tools/include/bpf/libbpf_common.h:19:47: note: expanded from macro 'LIBBPF_DEPRECATED'
#define LIBBPF_DEPRECATED(msg) __attribute__((deprecated(msg)))
There are two ways to fix the issue, one is to use GCC diagnostic ignore pragma, and the
other is to open code bpf_object_open_opts instead of using LIBBPF_OPTS.
Since in general LIBBPF_OPTS is preferred, the patch fixed the issue by
adding proper GCC diagnostic ignore pragmas.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220217194005.2765348-1-yhs@fb.com
|
|
Daniel Borkmann says:
====================
bpf-next 2022-02-17
We've added 29 non-merge commits during the last 8 day(s) which contain
a total of 34 files changed, 1502 insertions(+), 524 deletions(-).
The main changes are:
1) Add BTFGen support to bpftool which allows to use CO-RE in kernels without
BTF info, from Mauricio Vásquez, Rafael David Tinoco, Lorenzo Fontana and
Leonardo Di Donato. (Details: https://lpc.events/event/11/contributions/948/)
2) Prepare light skeleton to be used in both kernel module and user space
and convert bpf_preload.ko to use light skeleton, from Alexei Starovoitov.
3) Rework bpftool's versioning scheme and align with libbpf's version number;
also add linked libbpf version info to "bpftool version", from Quentin Monnet.
4) Add minimal C++ specific additions to bpftool's skeleton codegen to
facilitate use of C skeletons in C++ applications, from Andrii Nakryiko.
5) Add BPF verifier sanity check whether relative offset on kfunc calls overflows
desc->imm and reject the BPF program if the case, from Hou Tao.
6) Fix libbpf to use a dynamically allocated buffer for netlink messages to
avoid receiving truncated messages on some archs, from Toke Høiland-Jørgensen.
7) Various follow-up fixes to the JIT bpf_prog_pack allocator, from Song Liu.
8) Various BPF selftest and vmtest.sh fixes, from Yucong Sun.
9) Fix bpftool pretty print handling on dumping map keys/values when no BTF
is available, from Jiri Olsa and Yinjun Zhang.
10) Extend XDP frags selftest to check for invalid length, from Lorenzo Bianconi.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (29 commits)
bpf: bpf_prog_pack: Set proper size before freeing ro_header
selftests/bpf: Fix crash in core_reloc when bpftool btfgen fails
selftests/bpf: Fix vmtest.sh to launch smp vm.
libbpf: Fix memleak in libbpf_netlink_recv()
bpftool: Fix C++ additions to skeleton
bpftool: Fix pretty print dump for maps without BTF loaded
selftests/bpf: Test "bpftool gen min_core_btf"
bpftool: Gen min_core_btf explanation and examples
bpftool: Implement btfgen_get_btf()
bpftool: Implement "gen min_core_btf" logic
bpftool: Add gen min_core_btf command
libbpf: Expose bpf_core_{add,free}_cands() to bpftool
libbpf: Split bpf_core_apply_relo()
bpf: Reject kfunc calls that overflow insn->imm
selftests/bpf: Add Skeleton templated wrapper as an example
bpftool: Add C++-specific open/load/etc skeleton wrappers
selftests/bpf: Fix GCC11 compiler warnings in -O2 mode
bpftool: Fix the error when lookup in no-btf maps
libbpf: Use dynamically allocated buffer when receiving netlink messages
libbpf: Fix libbpf.map inheritance chain for LIBBPF_0.7.0
...
====================
Link: https://lore.kernel.org/r/20220217232027.29831-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|