Age | Commit message (Collapse) | Author | Files | Lines |
|
The kernel's default behaviour is to obstruct the allocation of high
virtual address as it handles memory overcommit in a heuristic manner.
Setting the parameter as OVERCOMMIT_ALWAYS, ensures kernel isn't
susceptible to the availability of a platform's physical memory when
denying a memory allocation request.
Link: https://lkml.kernel.org/r/20230323060121.1175830-4-chaitanyas.prakash@arm.com
Signed-off-by: Chaitanya S Prakash <chaitanyas.prakash@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Although there is a provision for 52 bit VA on arm64 platform, it remains
unutilised and higher addresses are not allocated. In order to
accommodate 4PB [2^52] virtual address space where supported,
NR_CHUNKS_HIGH is changed accordingly.
Array holding addresses is changed from static allocation to dynamic
allocation to accommodate its voluminous nature which otherwise might
overflow the stack.
Link: https://lkml.kernel.org/r/20230323060121.1175830-3-chaitanyas.prakash@arm.com
Signed-off-by: Chaitanya S Prakash <chaitanyas.prakash@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "selftests: Fix virtual address range for arm64", v2.
When the virtual address range selftest is run on arm64 and x86 platforms,
it is observed that both the low and high VA range iterations are skipped
when the MAP_CHUNK_SIZE is set to 16GB. The MAP_CHUNK_SIZE is changed to
1GB to resolve this issue, following which support for arm64 platform is
added by changing the NR_CHUNKS_HIGH for aarch64 to accommodate up to 4PB
of virtual address space allocation requests. Dynamic memory allocation
of array holding addresses is introduced to prevent overflow of the stack.
Finally, the overcommit_policy is set as OVERCOMMIT_ALWAYS to prevent the
kernel from denying a memory allocation request based on a platform's
physical memory availability.
This patch (of 3):
mmap() fails to allocate 16GB virtual space chunk, skipping both low and
high VA range iterations. Hence, reduce MAP_CHUNK_SIZE to 1GB and update
relevant macros as required.
Link: https://lkml.kernel.org/r/20230323060121.1175830-1-chaitanyas.prakash@arm.com
Link: https://lkml.kernel.org/r/20230323060121.1175830-2-chaitanyas.prakash@arm.com
Signed-off-by: Chaitanya S Prakash <chaitanyas.prakash@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
UFFDIO_COPY already has UFFDIO_COPY_MODE_WP, so when installing a new PTE
to resolve a missing fault, one can install a write-protected one. This
is useful when using UFFDIO_REGISTER_MODE_{MISSING,WP} in combination.
This was motivated by testing HugeTLB HGM [1], and in particular its
interaction with userfaultfd features. Existing userfaultfd code supports
using WP and MINOR modes together (i.e. you can register an area with
both enabled), but without this CONTINUE flag the combination is in
practice unusable.
So, add an analogous UFFDIO_CONTINUE_MODE_WP, which does the same thing as
UFFDIO_COPY_MODE_WP, but for *minor* faults.
Update the selftest to do some very basic exercising of the new flag.
Update Documentation/ to describe how these flags are used (neither the
COPY nor the new CONTINUE versions of this mode flag were described there
before).
[1]: https://patchwork.kernel.org/project/linux-mm/cover/20230218002819.1486479-1-jthoughton@google.com/
Link: https://lkml.kernel.org/r/20230314221250.682452-5-axelrasmussen@google.com
Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
Acked-by: Peter Xu <peterx@redhat.com>
Acked-by: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nadav Amit <namit@vmware.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
MAX_ORDER currently defined as number of orders page allocator supports:
user can ask buddy allocator for page order between 0 and MAX_ORDER-1.
This definition is counter-intuitive and lead to number of bugs all over
the kernel.
Change the definition of MAX_ORDER to be inclusive: the range of orders
user can ask from buddy allocator is 0..MAX_ORDER now.
[kirill@shutemov.name: fix min() warning]
Link: https://lkml.kernel.org/r/20230315153800.32wib3n5rickolvh@box
[akpm@linux-foundation.org: fix another min_t warning]
[kirill@shutemov.name: fixups per Zi Yan]
Link: https://lkml.kernel.org/r/20230316232144.b7ic4cif4kjiabws@box.shutemov.name
[akpm@linux-foundation.org: fix underlining in docs]
Link: https://lore.kernel.org/oe-kbuild-all/202303191025.VRCTk6mP-lkp@intel.com/
Link: https://lkml.kernel.org/r/20230315113133.11326-11-kirill.shutemov@linux.intel.com
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc]
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Enable it by default on the stress test, and add some smoke tests for the
pte markers on anonymous.
Link: https://lkml.kernel.org/r/20230309223711.823547-3-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: Paul Gofman <pgofman@codeweavers.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Fix two inputs to check_anon_huge() and one if condition, so the tests
work as expected.
Link: https://lkml.kernel.org/r/20230306160907.16804-1-zi.yan@sent.com
Fixes: c07c343cda8e ("selftests/vm: dedup THP helpers")
Signed-off-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Zach O'Keefe <zokeefe@google.com>
Tested-by: Zach O'Keefe <zokeefe@google.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
There are several 'malloc' calls in test_memcontrol, which can be
unsuccessful. This patch will add 'malloc' failures checking to give more
details about test's fail reasons and avoid possible undefined behavior
during the future null dereference (like the one in
alloc_anon_50M_check_swap function).
Link: https://lkml.kernel.org/r/20230226131634.34366-1-ivan.orlov0322@gmail.com
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Zefan Li <lizefan.x@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Add a AMX ptrace self test
- Prevent a false-positive warning when retrieving the (invalid)
address of dynamic FPU features in their init state which are not
saved in init_fpstate at all
- Randomize per-CPU entry areas only when KASLR is enabled
* tag 'x86_urgent_for_v6.3_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
selftests/x86/amx: Add a ptrace test
x86/fpu/xstate: Prevent false-positive warning in __copy_xstate_uabi_buf()
x86/mm: Do not shuffle CPU entry areas without KASLR
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"21 hotfixes, 8 of which are cc:stable. 11 are for MM, the remainder
are for other subsystems"
* tag 'mm-hotfixes-stable-2023-03-24-17-09' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (21 commits)
mm: mmap: remove newline at the end of the trace
mailmap: add entries for Richard Leitner
kcsan: avoid passing -g for test
kfence: avoid passing -g for test
mm: kfence: fix using kfence_metadata without initialization in show_object()
lib: dhry: fix unstable smp_processor_id(_) usage
mailmap: add entry for Enric Balletbo i Serra
mailmap: map Sai Prakash Ranjan's old address to his current one
mailmap: map Rajendra Nayak's old address to his current one
Revert "kasan: drop skip_kasan_poison variable in free_pages_prepare"
mailmap: add entry for Tobias Klauser
kasan, powerpc: don't rename memintrinsics if compiler adds prefixes
mm/ksm: fix race with VMA iteration and mm_struct teardown
kselftest: vm: fix unused variable warning
mm: fix error handling for map_deny_write_exec
mm: deduplicate error handling for map_deny_write_exec
checksyscalls: ignore fstat to silence build warning on LoongArch
nilfs2: fix kernel-infoleak in nilfs_ioctl_wrap_copy()
test_maple_tree: add more testing for mas_empty_area()
maple_tree: fix mas_skip_node() end slot detection
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bpf, wifi and bluetooth.
Current release - regressions:
- wifi: mt76: mt7915: add back 160MHz channel width support for
MT7915
- libbpf: revert poisoning of strlcpy, it broke uClibc-ng
Current release - new code bugs:
- bpf: improve the coverage of the "allow reads from uninit stack"
feature to fix verification complexity problems
- eth: am65-cpts: reset PPS genf adj settings on enable
Previous releases - regressions:
- wifi: mac80211: serialize ieee80211_handle_wake_tx_queue()
- wifi: mt76: do not run mt76_unregister_device() on unregistered hw,
fix null-deref
- Bluetooth: btqcomsmd: fix command timeout after setting BD address
- eth: igb: revert rtnl_lock() that causes a deadlock
- dsa: mscc: ocelot: fix device specific statistics
Previous releases - always broken:
- xsk: add missing overflow check in xdp_umem_reg()
- wifi: mac80211:
- fix QoS on mesh interfaces
- fix mesh path discovery based on unicast packets
- Bluetooth:
- ISO: fix timestamped HCI ISO data packet parsing
- remove "Power-on" check from Mesh feature
- usbnet: more fixes to drivers trusting packet length
- wifi: iwlwifi: mvm: fix mvmtxq->stopped handling
- Bluetooth: btintel: iterate only bluetooth device ACPI entries
- eth: iavf: fix inverted Rx hash condition leading to disabled hash
- eth: igc: fix the validation logic for taprio's gate list
- dsa: tag_brcm: legacy: fix daisy-chained switches
Misc:
- bpf: adjust insufficient default bpf_jit_limit to account for
growth of BPF use over the last 5 years
- xdp: bpf_xdp_metadata() use EOPNOTSUPP as unique errno indicating
no driver support"
* tag 'net-6.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (84 commits)
Bluetooth: HCI: Fix global-out-of-bounds
Bluetooth: mgmt: Fix MGMT add advmon with RSSI command
Bluetooth: btsdio: fix use after free bug in btsdio_remove due to unfinished work
Bluetooth: L2CAP: Fix responding with wrong PDU type
Bluetooth: btqcomsmd: Fix command timeout after setting BD address
Bluetooth: btinel: Check ACPI handle for NULL before accessing
net: mdio: thunder: Add missing fwnode_handle_put()
net: dsa: mt7530: move setting ssc_delta to PHY_INTERFACE_MODE_TRGMII case
net: dsa: mt7530: move lowering TRGMII driving to mt7530_setup()
net: dsa: mt7530: move enabling disabling core clock to mt7530_pll_setup()
net: asix: fix modprobe "sysfs: cannot create duplicate filename"
gve: Cache link_speed value from device
tools: ynl: Fix genlmsg header encoding formats
net: enetc: fix aggregate RMON counters not showing the ranges
Bluetooth: Remove "Power-on" check from Mesh feature
Bluetooth: Fix race condition in hci_cmd_sync_clear
Bluetooth: btintel: Iterate only bluetooth device ACPI entries
Bluetooth: ISO: fix timestamped HCI ISO data packet parsing
Bluetooth: btusb: Remove detection of ISO packets over bulk
Bluetooth: hci_core: Detect if an ACL packet is in fact an ISO packet
...
|
|
Remove unused variable from the MDWE test.
[joey.gouly@arm.com: add commit message]
Link: https://lkml.kernel.org/r/20230308190423.46491-4-joey.gouly@arm.com
Fixes: 4cf1fe34fd18 ("kselftest: vm: add tests for memory-deny-write-execute")
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Alexey Izbyshev <izbyshev@ispras.ru>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: nd <nd@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2023-03-23
We've added 8 non-merge commits during the last 13 day(s) which contain
a total of 21 files changed, 238 insertions(+), 161 deletions(-).
The main changes are:
1) Fix verification issues in some BPF programs due to their stack usage
patterns, from Eduard Zingerman.
2) Fix to add missing overflow checks in xdp_umem_reg and return an error
in such case, from Kal Conley.
3) Fix and undo poisoning of strlcpy in libbpf given it broke builds for
libcs which provided the former like uClibc-ng, from Jesus Sanchez-Palencia.
4) Fix insufficient bpf_jit_limit default to avoid users running into hard
to debug seccomp BPF errors, from Daniel Borkmann.
5) Fix driver return code when they don't support a bpf_xdp_metadata kfunc
to make it unambiguous from other errors, from Jesper Dangaard Brouer.
6) Two BPF selftest fixes to address compilation errors from recent changes
in kernel structures, from Alexei Starovoitov.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
xdp: bpf_xdp_metadata use EOPNOTSUPP for no driver support
bpf: Adjust insufficient default bpf_jit_limit
xsk: Add missing overflow check in xdp_umem_reg
selftests/bpf: Fix progs/test_deny_namespace.c issues.
selftests/bpf: Fix progs/find_vma_fail1.c build error.
libbpf: Revert poisoning of strlcpy
selftests/bpf: Tests for uninitialized stack reads
bpf: Allow reads from uninit stack
====================
Link: https://lore.kernel.org/r/20230323225221.6082-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The pack strings use 'b' signed char for cmd and version but struct
genlmsghdr defines them as unsigned char. Use 'B' instead.
Fixes: 4e4480e89c47 ("tools: ynl: move the cli and netlink code around")
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20230319193803.97453-1-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Include a test case to validate the XTILEDATA injection to the target.
Also, it ensures the kernel's ability to copy states between different
XSAVE formats.
Refactor the memcmp() code to be usable for the state validation.
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20230227210504.18520-3-chang.seok.bae%40intel.com
|
|
Since commit 6c40624930c5 ("bootconfig: Increase max nodes of bootconfig
from 1024 to 8192 for DCC support") increased the max number of bootconfig
node to 8192, the bootconfig testcase of the max number of nodes fails.
To fix this issue, we can not simply increase the number in the test script
because the test bootconfig file becomes too big (>32KB). To fix that, we
can use a combination of three alphabets (26^3 = 17576). But with that,
we can not express the 8193 (just one exceed from the limitation) because
it also exceeds the max size of bootconfig. So, the first 26 nodes will just
use one alphabet.
With this fix, test-bootconfig.sh passes all tests.
Link: https://lore.kernel.org/all/167888844790.791176.670805252426835131.stgit@devnote2/
Reported-by: Heinz Wiesinger <pprkut@slackware.com>
Link: https://lore.kernel.org/all/2463802.XAFRqVoOGU@amaterasu.liwjatan.org
Fixes: 6c40624930c5 ("bootconfig: Increase max nodes of bootconfig from 1024 to 8192 for DCC support")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter, wifi and ipsec.
A little more changes than usual, but it's pretty normal for us that
the rc3/rc4 PRs are oversized as people start testing in earnest.
Possibly an extra boost from people deploying the 6.1 LTS but that's
more of an unscientific hunch.
Current release - regressions:
- phy: mscc: fix deadlock in phy_ethtool_{get,set}_wol()
- virtio: vsock: don't use skbuff state to account credit
- virtio: vsock: don't drop skbuff on copy failure
- virtio_net: fix page_to_skb() miscalculating the memory size
Current release - new code bugs:
- eth: correct xdp_features after device reconfig
- wifi: nl80211: fix the puncturing bitmap policy
- net/mlx5e: flower:
- fix raw counter initialization
- fix missing error code
- fix cloned flow attribute
- ipa:
- fix some register validity checks
- fix a surprising number of bad offsets
- kill FILT_ROUT_CACHE_CFG IPA register
Previous releases - regressions:
- tcp: fix bind() conflict check for dual-stack wildcard address
- veth: fix use after free in XDP_REDIRECT when skb headroom is small
- ipv4: fix incorrect table ID in IOCTL path
- ipvlan: make skb->skb_iif track skb->dev for l3s mode
- mptcp:
- fix possible deadlock in subflow_error_report
- fix UaFs when destroying unaccepted and listening sockets
- dsa: mv88e6xxx: fix max_mtu of 1492 on 6165, 6191, 6220, 6250, 6290
Previous releases - always broken:
- tcp: tcp_make_synack() can be called from process context, don't
assume preemption is disabled when updating stats
- netfilter: correct length for loading protocol registers
- virtio_net: add checking sq is full inside xdp xmit
- bonding: restore IFF_MASTER/SLAVE flags on bond enslave Ethertype
change
- phy: nxp-c45-tja11xx: fix MII_BASIC_CONFIG_REV bit number
- eth: i40e: fix crash during reboot when adapter is in recovery mode
- eth: ice: avoid deadlock on rtnl lock when auxiliary device
plug/unplug meets bonding
- dsa: mt7530:
- remove now incorrect comment regarding port 5
- set PLL frequency and trgmii only when trgmii is used
- eth: mtk_eth_soc: reset PCS state when changing interface types
Misc:
- ynl: another license adjustment
- move the TCA_EXT_WARN_MSG attribute for tc action"
* tag 'net-6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (108 commits)
selftests: bonding: add tests for ether type changes
bonding: restore bond's IFF_SLAVE flag if a non-eth dev enslave fails
bonding: restore IFF_MASTER/SLAVE flags on bond enslave ether type change
net: renesas: rswitch: Fix GWTSDIE register handling
net: renesas: rswitch: Fix the output value of quote from rswitch_rx()
ethernet: sun: add check for the mdesc_grab()
net: ipa: fix some register validity checks
net: ipa: kill FILT_ROUT_CACHE_CFG IPA register
net: ipa: add two missing declarations
net: ipa: reg: include <linux/bug.h>
net: xdp: don't call notifiers during driver init
net/sched: act_api: add specific EXT_WARN_MSG for tc action
Revert "net/sched: act_api: move TCA_EXT_WARN_MSG to the correct hierarchy"
net: dsa: microchip: fix RGMII delay configuration on KSZ8765/KSZ8794/KSZ8795
ynl: make the tooling check the license
ynl: broaden the license even more
tools: ynl: make definitions optional again
hsr: ratelimit only when errors are printed
qed/qed_mng_tlv: correctly zero out ->min instead of ->hour
selftests: net: devlink_port_split.py: skip test if no suitable device available
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix an error code path issue in a cpuidle driver and make the
sleepgraph utility more robust against unexpected input.
Specifics:
- Fix the psci_pd_init_topology() failure path in the PSCI cpuidle
driver (Shawn Guo)
- Modify the sleepgraph utility so it does not crash on binary data
in device names (Todd Brandt)"
* tag 'pm-6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
pm-graph: sleepgraph: Avoid crashing on binary data in device names
cpuidle: psci: Iterate backwards over list in psci_pd_remove()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These add some new quirks, fix PPTT handling, fix an ACPI utility and
correct a mistake in the ACPI documentation.
Specifics:
- Fix ACPI PPTT handling to avoid sleep in the atomic context when it
is not present (Sudeep Holla)
- Add 'backlight=native' DMI quirk for Dell Vostro 15 3535 to the
ACPI video driver (Chia-Lin Kao)
- Add ACPI quirks for I2C device enumeration on Lenovo Yoga Book X90
and Acer Iconia One 7 B1-750 (Hans de Goede)
- Fix handling of invalid command line option values in the ACPI
pfrut utility (Chen Yu)
- Fix references to I2C device data type in the ACPI documentation
for device enumeration (Andy Shevchenko)"
* tag 'acpi-6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: tools: pfrut: Check if the input of level and type is in the right numeric range
ACPI: PPTT: Fix to avoid sleep in the atomic context when PPTT is absent
ACPI: x86: Add skip i2c clients quirk for Lenovo Yoga Book X90
ACPI: x86: Add skip i2c clients quirk for Acer Iconia One 7 B1-750
ACPI: x86: Introduce an acpi_quirk_skip_gpio_event_handlers() helper
ACPI: video: Add backlight=native DMI quirk for Dell Vostro 15 3535
ACPI: docs: enumeration: Correct reference to the I²C device data type
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux
Pull turbostat fweaks and fixes from Len Brown:
"Leprechaun sized fixes and tweaks touching only turbostat.
'Keeping happy users happy since 2010'"
* 'turbostat' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux:
tools/power turbostat: version 2023.03.17
tools/power turbostat: fix decoding of HWP_STATUS
tools/power turbostat: Introduce support for EMR
tools/power turbostat: remove stray newlines from warn/warnx strings
tools/power turbostat: Fix /dev/cpu_dma_latency warnings
tools/power turbostat: Provide better debug messages for failed capabilities accesses
tools/power turbostat: update dump of SECONDARY_TURBO_RATIO_LIMIT
|
|
Happy St. Patrick's Day!
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
The "excursion to minimum" information is in bit2
in HWP_STATUS MSR. Fix the bitmask used for
decoding the register.
Signed-off-by: Antti Laakso <antti.laakso@intel.com>
Reviewed-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
Introduce support for EMR.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Tested-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
warn(3) terminates strings with newlines
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
When running as non-root the following error is seen in turbostat:
turbostat: fopen /dev/cpu_dma_latency
: Permission denied
turbostat and the man page have information on how to avoid other
permission errors, so these can be fixed the same way.
Provide better /dev/cpu_dma_latency warnings that provide instructions on
how to avoid the error, and update the man page.
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Cc: linux-pm@vger.kernel.org
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
accesses
turbostat reports some capabilities access errors and not others. Provide
the same debug message for all errors.
[lenb: remove extra quotes]
Cc: David Arcari <darcari@redhat.com>
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
cosmetic only (but useful if you copy/paste)
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
Add new network selftests for the bonding device which exercise the ether
type changing call paths. They also test for the recent syzbot bug[1] which
causes a warning and results in wrong device flags (IFF_SLAVE missing).
The test adds three bond devices and a nlmon device, enslaves one of the
bond devices to the other and then uses the nlmon device for successful
and unsuccesful enslaves both of which change the bond ether type. Thus
we can test for both MASTER and SLAVE flags at the same time.
If the flags are properly restored we get:
TEST: Change ether type of an enslaved bond device with unsuccessful enslave [ OK ]
TEST: Change ether type of an enslaved bond device with successful enslave [ OK ]
[1] https://syzkaller.appspot.com/bug?id=391c7b1f6522182899efba27d891f1743e8eb3ef
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Acked-by: Jonathan Toppins <jtoppins@redhat.com>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The (only recently documented) expectation is that all specs
are under a certain license, but we don't actually enforce it.
What's worse we then go ahead and assume the license was right,
outputting the expected license into generated files.
Fixes: 37d9df224d1e ("ynl: re-license uniformly under GPL-2.0 OR BSD-3-Clause")
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
I relicensed Netlink spec code to GPL-2.0 OR BSD-3-Clause but
we still put a slightly different license on the uAPI header
than the rest of the code. Use the Linux-syscall-note on all
the specs and all generated code. It's moot for kernel code,
but should not hurt. This way the licenses match everywhere.
Cc: Chuck Lever <chuck.lever@oracle.com>
Fixes: 37d9df224d1e ("ynl: re-license uniformly under GPL-2.0 OR BSD-3-Clause")
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
definitions are optional, commit in question breaks cli for ethtool.
Fixes: 6517a60b0307 ("tools: ynl: move the enum classes to shared code")
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The `devlink -j port show` command output may not contain the "flavour"
key, an example from Ubuntu 22.10 s390x LPAR(5.19.0-37-generic), with
mlx4 driver and iproute2-5.15.0:
{"port":{"pci/0001:00:00.0/1":{"type":"eth","netdev":"ens301"},
"pci/0001:00:00.0/2":{"type":"eth","netdev":"ens301d1"},
"pci/0002:00:00.0/1":{"type":"eth","netdev":"ens317"},
"pci/0002:00:00.0/2":{"type":"eth","netdev":"ens317d1"}}}
This will cause a KeyError exception.
Create a validate_devlink_output() to check for this "flavour" from
devlink command output to avoid this KeyError exception. Also let
it handle the check for `devlink -j dev show` output in main().
Apart from this, if the test was not started because the max lanes of
the designated device is 0. The script will still return 0 and thus
causing a false-negative test result.
Use a found_max_lanes flag to determine if these tests were skipped
due to this reason and return KSFT_SKIP to make it more clear.
Link: https://bugs.launchpad.net/bugs/1937133
Fixes: f3348a82e727 ("selftests: net: Add port split test")
Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Link: https://lore.kernel.org/r/20230315165353.229590-1-po-hsu.lin@canonical.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull kvm fixes from Paolo Bonzini:
"ARM64:
- Address a rather annoying bug w.r.t. guest timer offsetting. The
synchronization of timer offsets between vCPUs was broken, leading
to inconsistent timer reads within the VM.
x86:
- New tests for the slow path of the EVTCHNOP_send Xen hypercall
- Add missing nVMX consistency checks for CR0 and CR4
- Fix bug that broke AMD GATag on 512 vCPU machines
Selftests:
- Skip hugetlb tests if huge pages are not available
- Sync KVM exit reasons"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: selftests: Sync KVM exit reasons in selftests
KVM: selftests: Add macro to generate KVM exit reason strings
KVM: selftests: Print expected and actual exit reason in KVM exit reason assert
KVM: selftests: Make vCPU exit reason test assertion common
KVM: selftests: Add EVTCHNOP_send slow path test to xen_shinfo_test
KVM: selftests: Use enum for test numbers in xen_shinfo_test
KVM: selftests: Add helpers to make Xen-style VMCALL/VMMCALL hypercalls
KVM: selftests: Move the guts of kvm_hypercall() to a separate macro
KVM: SVM: WARN if GATag generation drops VM or vCPU ID information
KVM: SVM: Modify AVIC GATag to support max number of 512 vCPUs
KVM: SVM: Fix a benign off-by-one bug in AVIC physical table mask
selftests: KVM: skip hugetlb tests if huge pages are not available
KVM: VMX: Use tabs instead of spaces for indentation
KVM: VMX: Fix indentation coding style issue
KVM: nVMX: remove unnecessary #ifdef
KVM: nVMX: add missing consistency checks for CR0 and CR4
KVM: arm64: timers: Convert per-vcpu virtual offset to a global value
|
|
This adds SOCK_STREAM and SOCK_SEQPACKET tests for invalid buffer case.
It tries to read data to NULL buffer (data already presents in socket's
queue), then uses valid buffer. For SOCK_STREAM second read must return
data, because skbuff is not dropped, but for SOCK_SEQPACKET skbuff will
be dropped by kernel, and 'recv()' will return EAGAIN.
Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fixes from Shuah Khan:
"A fix to amd-pstate test Makefile and a fix to LLVM build for x86 in
kselftest common lib.mk"
* tag 'linux-kselftest-fixes-6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: fix LLVM build for i386 and x86_64
selftests: amd-pstate: fix TEST_FILES
|
|
The test checks if (IPv4, IPv6) address pair properly conflict or not.
* IPv4
* 0.0.0.0
* 127.0.0.1
* IPv6
* ::
* ::1
If the IPv6 address is [::], the second bind() always fails.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
numeric range
The user provides arbitrary non-numeic value to level and type,
which could bring unexpected behavior. In this case the expected
behavior would be to throw an error.
pfrut -h
usage: pfrut [OPTIONS]
code injection:
-l, --load
-s, --stage
-a, --activate
-u, --update [stage and activate]
-q, --query
-d, --revid
update telemetry:
-G, --getloginfo
-T, --type(0:execution, 1:history)
-L, --level(0, 1, 2, 4)
-R, --read
-D, --revid log
pfrut -T A
pfrut -G
log_level:0
log_type:0
log_revid:2
max_data_size:65536
chunk1_size:0
chunk2_size:1530
rollover_cnt:0
reset_cnt:17
Fix this by restricting the input to be in the expected range.
Reported-by: Hariganesh Govindarajulu <hariganesh.govindarajulu@intel.com>
Suggested-by: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
A regression has occurred in the hid-sensor code where a device
name string has not been initialized to 0, and ends up without
a NULL char and is printed with %s. This includes random binary
data in the device name, which makes its way into the ftrace output
and ends up crashing sleepgraph because it expects the ftrace output
to be ASCII only.
For example: "HID-SENSOR-INT-020b?.39.auto" ends up in ftrace instead
of "HID-SENSOR-INT-020b.39.auto". It causes this crash in sleepgraph:
File "/usr/bin/sleepgraph", line 5579, in executeSuspend
for line in fp:
File "/usr/lib/python3.10/codecs.py", line 322, in decode
(result, consumed) = self._buffer_decode(data, self.errors, final)
UnicodeDecodeError: 'utf-8' codec can't decode byte 0xff in position
1568: invalid start byte
The issue is present in 6.3-rc1 and is described in full here:
https://bugzilla.kernel.org/show_bug.cgi?id=217169
A separate fix has been submitted to have this issue repaired, but
it has also exposed a larger bug in sleepgraph, since nothing should
make sleepgraph crash. Sleepgraph needs to be able to handle binary
data showing up in ftrace gracefully.
Modify the ftrace processing code to treat it as potentially binary
and to filter out binary data and leave just the ASCII.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217169
Fixes: 98c062e82451 ("HID: hid-sensor-custom: Allow more custom iio sensors")
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Add missing KVM_EXIT_* reasons in KVM selftests from
include/uapi/linux/kvm.h
Signed-off-by: Vipin Sharma <vipinsh@google.com>
Message-Id: <20230204014547.583711-5-vipinsh@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Add and use a macro to generate the KVM exit reason strings array
instead of relying on developers to correctly copy+paste+edit each
string.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230204014547.583711-4-vipinsh@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Print what KVM exit reason a test was expecting and what it actually
got int TEST_ASSERT_KVM_EXIT_REASON().
Signed-off-by: Vipin Sharma <vipinsh@google.com>
Message-Id: <20230204014547.583711-3-vipinsh@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Make TEST_ASSERT_KVM_EXIT_REASON() macro and replace all exit reason
test assert statements with it.
No functional changes intended.
Signed-off-by: Vipin Sharma <vipinsh@google.com>
Reviewed-by: David Matlack <dmatlack@google.com>
Message-Id: <20230204014547.583711-2-vipinsh@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
When kvm_xen_evtchn_send() takes the slow path because the shinfo GPC
needs to be revalidated, it used to violate the SRCU vs. kvm->lock
locking rules and potentially cause a deadlock.
Now that lockdep is learning to catch such things, make sure that code
path is exercised by the selftest.
Link: https://lore.kernel.org/all/20230113124606.10221-2-dwmw2@infradead.org
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230204024151.1373296-5-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The xen_shinfo_test started off with very few iterations, and the numbers
we used in GUEST_SYNC() were precisely mapped to the RUNSTATE_xxx values
anyway to start with.
It has since grown quite a few more tests, and it's kind of awful to be
handling them all as bare numbers. Especially when I want to add a new
test in the middle. Define an enum for the test stages, and use it both
in the guest code and the host switch statement.
No functional change, if I can count to 24.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230204024151.1373296-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Add wrappers to do hypercalls using VMCALL/VMMCALL and Xen's register ABI
(as opposed to full Xen-style hypercalls through a hypervisor provided
page). Using the common helpers dedups a pile of code, and uses the
native hypercall instruction when running on AMD.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230204024151.1373296-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Extract the guts of kvm_hypercall() to a macro so that Xen hypercalls,
which have a different register ABI, can reuse the VMCALL vs. VMMCALL
logic.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230204024151.1373296-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Right now, if KVM memory stress tests are run with hugetlb sources but hugetlb is
not available (either in the kernel or because /proc/sys/vm/nr_hugepages is 0)
the test will fail with a memory allocation error.
This makes it impossible to add tests that default to hugetlb-backed memory,
because on a machine with a default configuration they will fail. Therefore,
check HugePages_Total as well and, if zero, direct the user to enable hugepages
in procfs. Furthermore, return KSFT_SKIP whenever hugetlb is not available.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Merge commit bf9bec4cb3a4 ("Merge branch 'bpf: Allow reads from uninit stack'")
from bpf-next to bpf tree to address verification issues in some programs
due to stack usage.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Pull virtio fixes from Michael Tsirkin:
"Some virtio / vhost / vdpa fixes accumulated so far"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
tools/virtio: Ignore virtio-trace/trace-agent
vdpa_sim: set last_used_idx as last_avail_idx in vdpasim_queue_ready
vhost-vdpa: free iommu domain after last use during cleanup
vdpa/mlx5: should not activate virtq object when suspended
vp_vdpa: fix the crash in hot unplug with vp_vdpa
|
|
since commit 108fc82596e3("tools: Add guest trace agent as a user tool")
introduce virtio-trace/trace-agent, it should be ignored in the git tree.
Signed-off-by: Rong Tao <rongtao@cestc.cn>
Message-Id: <tencent_52B2BC2F47540A5FEB46E710BD0C8485B409@qq.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|