From 250fdabec6ffcaf895c5e0dedca62706ef10d8f6 Mon Sep 17 00:00:00 2001 From: Thinh Nguyen Date: Mon, 25 Oct 2021 16:15:32 -0700 Subject: usb: dwc3: core: Revise GHWPARAMS9 offset During our predesign phase for DWC_usb32, the GHWPARAMS9 register offset was 0xc680. We revised our final design, and the GHWPARAMS9 offset is now moved to 0xc6e8 on release. Fixes: 16710380d3aa ("usb: dwc3: Capture new capability register GHWPARAMS9") Cc: Signed-off-by: Thinh Nguyen Link: https://lore.kernel.org/r/1541737108266a97208ff827805be1f32852590c.1635202893.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/dwc3/core.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h index 620c8d3914d7..5c491d0a19d7 100644 --- a/drivers/usb/dwc3/core.h +++ b/drivers/usb/dwc3/core.h @@ -143,7 +143,7 @@ #define DWC3_GHWPARAMS8 0xc600 #define DWC3_GUCTL3 0xc60c #define DWC3_GFLADJ 0xc630 -#define DWC3_GHWPARAMS9 0xc680 +#define DWC3_GHWPARAMS9 0xc6e0 /* Device Registers */ #define DWC3_DCFG 0xc700 -- cgit v1.2.3 From d74dc3e9f58c28689cef1faccf918e06587367d3 Mon Sep 17 00:00:00 2001 From: Thinh Nguyen Date: Mon, 25 Oct 2021 16:21:10 -0700 Subject: usb: dwc3: gadget: Ignore NoStream after End Transfer The End Transfer command from a stream endpoint will generate a NoStream event, and we should ignore it. Currently we set the flag DWC3_EP_IGNORE_NEXT_NOSTREAM to track this prior to sending the command, and it will be cleared on the next stream event. However, a stream event may be generated before the End Transfer command completion and prematurely clear the flag. Fix this by setting the flag on End Transfer completion instead. Fixes: 140ca4cfea8a ("usb: dwc3: gadget: Handle stream transfers") Cc: Signed-off-by: Thinh Nguyen Link: https://lore.kernel.org/r/cee1253af4c3600edb878d11c9c08b040817ae23.1635203975.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/dwc3/gadget.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 23de2a5a40d6..3d6f4adaa15a 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -3352,6 +3352,14 @@ static void dwc3_gadget_endpoint_command_complete(struct dwc3_ep *dep, if (cmd != DWC3_DEPCMD_ENDTRANSFER) return; + /* + * The END_TRANSFER command will cause the controller to generate a + * NoStream Event, and it's not due to the host DP NoStream rejection. + * Ignore the next NoStream event. + */ + if (dep->stream_capable) + dep->flags |= DWC3_EP_IGNORE_NEXT_NOSTREAM; + dep->flags &= ~DWC3_EP_END_TRANSFER_PENDING; dep->flags &= ~DWC3_EP_TRANSFER_STARTED; dwc3_gadget_ep_cleanup_cancelled_requests(dep); @@ -3574,14 +3582,6 @@ static void dwc3_stop_active_transfer(struct dwc3_ep *dep, bool force, WARN_ON_ONCE(ret); dep->resource_index = 0; - /* - * The END_TRANSFER command will cause the controller to generate a - * NoStream Event, and it's not due to the host DP NoStream rejection. - * Ignore the next NoStream event. - */ - if (dep->stream_capable) - dep->flags |= DWC3_EP_IGNORE_NEXT_NOSTREAM; - if (!interrupt) dep->flags &= ~DWC3_EP_TRANSFER_STARTED; else -- cgit v1.2.3 From 63c4c320ccf77074ffe9019ac596603133c1b517 Mon Sep 17 00:00:00 2001 From: Thinh Nguyen Date: Mon, 25 Oct 2021 16:35:06 -0700 Subject: usb: dwc3: gadget: Check for L1/L2/U3 for Start Transfer The programming guide noted that the driver needs to verify if the link state is in U0 before executing the Start Transfer command. If it's not in U0, the driver needs to perform remote wakeup. This is not accurate. If the link state is in U1/U2, then the controller will not respond to link recovery request from DCTL.ULSTCHNGREQ. The Start Transfer command will trigger a link recovery if it is in U1/U2. A clarification will be added to the programming guide for all controller versions. The current implementation shouldn't cause any functional issue. It may occasionally report an invalid time out warning from failed link recovery request. The driver will still go ahead with the Start Transfer command if the remote wakeup fails. The new change only initiates remote wakeup where it is needed, which is when the link state is in L1/L2/U3. Fixes: c36d8e947a56 ("usb: dwc3: gadget: put link to U0 before Start Transfer") Cc: Signed-off-by: Thinh Nguyen Link: https://lore.kernel.org/r/05b4a5fbfbd0863fc9b1d7af934a366219e3d0b4.1635204761.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/dwc3/gadget.c | 17 ++++++++++++++--- 1 file changed, 14 insertions(+), 3 deletions(-) diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 3d6f4adaa15a..daa8f8548a2e 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -310,13 +310,24 @@ int dwc3_send_gadget_ep_cmd(struct dwc3_ep *dep, unsigned int cmd, if (DWC3_DEPCMD_CMD(cmd) == DWC3_DEPCMD_STARTTRANSFER) { int link_state; + /* + * Initiate remote wakeup if the link state is in U3 when + * operating in SS/SSP or L1/L2 when operating in HS/FS. If the + * link state is in U1/U2, no remote wakeup is needed. The Start + * Transfer command will initiate the link recovery. + */ link_state = dwc3_gadget_get_link_state(dwc); - if (link_state == DWC3_LINK_STATE_U1 || - link_state == DWC3_LINK_STATE_U2 || - link_state == DWC3_LINK_STATE_U3) { + switch (link_state) { + case DWC3_LINK_STATE_U2: + if (dwc->gadget->speed >= USB_SPEED_SUPER) + break; + + fallthrough; + case DWC3_LINK_STATE_U3: ret = __dwc3_gadget_wakeup(dwc); dev_WARN_ONCE(dwc->dev, ret, "wakeup failed --> %d\n", ret); + break; } } -- cgit v1.2.3 From 7ad4a0b1d46b2612f4429a72afd8f137d7efa9a9 Mon Sep 17 00:00:00 2001 From: Minas Harutyunyan Date: Thu, 4 Nov 2021 11:36:01 +0400 Subject: usb: dwc2: gadget: Fix ISOC flow for elapsed frames Added updating of request frame number for elapsed frames, otherwise frame number will remain as previous use of request. This will allow function driver to correctly track frames in case of Missed ISOC occurs. Added setting request actual length to 0 for elapsed frames. In Slave mode when pushing data to RxFIFO by dwords, request actual length incrementing accordingly. But before whole packet will be pushed into RxFIFO and send to host can occurs Missed ISOC and data will not send to host. So, in this case request actual length should be reset to 0. Fixes: 91bb163e1e4f ("usb: dwc2: gadget: Fix ISOC flow for BDMA and Slave") Cc: stable Reviewed-by: John Keeping Signed-off-by: Minas Harutyunyan Link: https://lore.kernel.org/r/c356baade6e9716d312d43df08d53ae557cb8037.1636011277.git.Minas.Harutyunyan@synopsys.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/dwc2/gadget.c | 17 ++++++++++++++--- 1 file changed, 14 insertions(+), 3 deletions(-) diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c index 4ab4a1d5062b..ab8d7dad9f56 100644 --- a/drivers/usb/dwc2/gadget.c +++ b/drivers/usb/dwc2/gadget.c @@ -1198,6 +1198,8 @@ static void dwc2_hsotg_start_req(struct dwc2_hsotg *hsotg, } ctrl |= DXEPCTL_CNAK; } else { + hs_req->req.frame_number = hs_ep->target_frame; + hs_req->req.actual = 0; dwc2_hsotg_complete_request(hsotg, hs_ep, hs_req, -ENODATA); return; } @@ -2857,9 +2859,12 @@ static void dwc2_gadget_handle_ep_disabled(struct dwc2_hsotg_ep *hs_ep) do { hs_req = get_ep_head(hs_ep); - if (hs_req) + if (hs_req) { + hs_req->req.frame_number = hs_ep->target_frame; + hs_req->req.actual = 0; dwc2_hsotg_complete_request(hsotg, hs_ep, hs_req, -ENODATA); + } dwc2_gadget_incr_frame_num(hs_ep); /* Update current frame number value. */ hsotg->frame_number = dwc2_hsotg_read_frameno(hsotg); @@ -2912,8 +2917,11 @@ static void dwc2_gadget_handle_out_token_ep_disabled(struct dwc2_hsotg_ep *ep) while (dwc2_gadget_target_frame_elapsed(ep)) { hs_req = get_ep_head(ep); - if (hs_req) + if (hs_req) { + hs_req->req.frame_number = ep->target_frame; + hs_req->req.actual = 0; dwc2_hsotg_complete_request(hsotg, ep, hs_req, -ENODATA); + } dwc2_gadget_incr_frame_num(ep); /* Update current frame number value. */ @@ -3002,8 +3010,11 @@ static void dwc2_gadget_handle_nak(struct dwc2_hsotg_ep *hs_ep) while (dwc2_gadget_target_frame_elapsed(hs_ep)) { hs_req = get_ep_head(hs_ep); - if (hs_req) + if (hs_req) { + hs_req->req.frame_number = hs_ep->target_frame; + hs_req->req.actual = 0; dwc2_hsotg_complete_request(hsotg, hs_ep, hs_req, -ENODATA); + } dwc2_gadget_incr_frame_num(hs_ep); /* Update current frame number value. */ -- cgit v1.2.3 From 51f2246158f686c881859f4b620f831f06e296e1 Mon Sep 17 00:00:00 2001 From: Dmitry Osipenko Date: Mon, 8 Nov 2021 01:44:55 +0300 Subject: usb: xhci: tegra: Check padctrl interrupt presence in device tree Older device-trees don't specify padctrl interrupt and xhci-tegra driver now fails to probe with -EINVAL using those device-trees. Check interrupt presence and keep runtime PM disabled if it's missing to fix the trouble. Fixes: 971ee247060d ("usb: xhci: tegra: Enable ELPG for runtime/system PM") Cc: # 5.14+ Reported-by: Nicolas Chauvet Tested-by: Nicolas Chauvet # T124 TK1 Tested-by: Thomas Graichen # T124 Nyan Big Tested-by: Thierry Reding # Tegra CI Acked-by: Thierry Reding Signed-off-by: Dmitry Osipenko Link: https://lore.kernel.org/r/20211107224455.10359-1-digetx@gmail.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-tegra.c | 41 +++++++++++++++++++++++++++++------------ 1 file changed, 29 insertions(+), 12 deletions(-) diff --git a/drivers/usb/host/xhci-tegra.c b/drivers/usb/host/xhci-tegra.c index 1bf494b649bd..c8af2cd2216d 100644 --- a/drivers/usb/host/xhci-tegra.c +++ b/drivers/usb/host/xhci-tegra.c @@ -1400,6 +1400,7 @@ static void tegra_xusb_deinit_usb_phy(struct tegra_xusb *tegra) static int tegra_xusb_probe(struct platform_device *pdev) { + struct of_phandle_args args; struct tegra_xusb *tegra; struct device_node *np; struct resource *regs; @@ -1454,10 +1455,17 @@ static int tegra_xusb_probe(struct platform_device *pdev) goto put_padctl; } - tegra->padctl_irq = of_irq_get(np, 0); - if (tegra->padctl_irq <= 0) { - err = (tegra->padctl_irq == 0) ? -ENODEV : tegra->padctl_irq; - goto put_padctl; + /* Older device-trees don't have padctrl interrupt */ + err = of_irq_parse_one(np, 0, &args); + if (!err) { + tegra->padctl_irq = of_irq_get(np, 0); + if (tegra->padctl_irq <= 0) { + err = (tegra->padctl_irq == 0) ? -ENODEV : tegra->padctl_irq; + goto put_padctl; + } + } else { + dev_dbg(&pdev->dev, + "%pOF is missing an interrupt, disabling PM support\n", np); } tegra->host_clk = devm_clk_get(&pdev->dev, "xusb_host"); @@ -1696,11 +1704,15 @@ static int tegra_xusb_probe(struct platform_device *pdev) goto remove_usb3; } - err = devm_request_threaded_irq(&pdev->dev, tegra->padctl_irq, NULL, tegra_xusb_padctl_irq, - IRQF_ONESHOT, dev_name(&pdev->dev), tegra); - if (err < 0) { - dev_err(&pdev->dev, "failed to request padctl IRQ: %d\n", err); - goto remove_usb3; + if (tegra->padctl_irq) { + err = devm_request_threaded_irq(&pdev->dev, tegra->padctl_irq, + NULL, tegra_xusb_padctl_irq, + IRQF_ONESHOT, dev_name(&pdev->dev), + tegra); + if (err < 0) { + dev_err(&pdev->dev, "failed to request padctl IRQ: %d\n", err); + goto remove_usb3; + } } err = tegra_xusb_enable_firmware_messages(tegra); @@ -1718,13 +1730,16 @@ static int tegra_xusb_probe(struct platform_device *pdev) /* Enable wake for both USB 2.0 and USB 3.0 roothubs */ device_init_wakeup(&tegra->hcd->self.root_hub->dev, true); device_init_wakeup(&xhci->shared_hcd->self.root_hub->dev, true); - device_init_wakeup(tegra->dev, true); pm_runtime_use_autosuspend(tegra->dev); pm_runtime_set_autosuspend_delay(tegra->dev, 2000); pm_runtime_mark_last_busy(tegra->dev); pm_runtime_set_active(tegra->dev); - pm_runtime_enable(tegra->dev); + + if (tegra->padctl_irq) { + device_init_wakeup(tegra->dev, true); + pm_runtime_enable(tegra->dev); + } return 0; @@ -1772,7 +1787,9 @@ static int tegra_xusb_remove(struct platform_device *pdev) dma_free_coherent(&pdev->dev, tegra->fw.size, tegra->fw.virt, tegra->fw.phys); - pm_runtime_disable(&pdev->dev); + if (tegra->padctl_irq) + pm_runtime_disable(&pdev->dev); + pm_runtime_put(&pdev->dev); tegra_xusb_powergate_partitions(tegra); -- cgit v1.2.3 From 3b8599a6f4817bdd7c5e7145f2972b7f22f00a9d Mon Sep 17 00:00:00 2001 From: Christophe JAILLET Date: Sun, 7 Nov 2021 17:25:48 +0100 Subject: usb: gadget: udc-xilinx: Fix an error handling path in 'xudc_probe()' A successful 'clk_prepare_enable()' call should be balanced by a corresponding 'clk_disable_unprepare()' call in the error handling path of the probe, as already done in the remove function. Fixes: 24749229211c ("usb: gadget: udc-xilinx: Add clock support") Reviewed-by: Shubhrajyoti Datta Signed-off-by: Christophe JAILLET Link: https://lore.kernel.org/r/ec61a89b83ce34b53a3bdaacfd1413a9869cc608.1636302246.git.christophe.jaillet@wanadoo.fr Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/udc/udc-xilinx.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/usb/gadget/udc/udc-xilinx.c b/drivers/usb/gadget/udc/udc-xilinx.c index f5ca670776a3..857159dd5ae0 100644 --- a/drivers/usb/gadget/udc/udc-xilinx.c +++ b/drivers/usb/gadget/udc/udc-xilinx.c @@ -2136,7 +2136,7 @@ static int xudc_probe(struct platform_device *pdev) ret = usb_add_gadget_udc(&pdev->dev, &udc->gadget); if (ret) - goto fail; + goto err_disable_unprepare_clk; udc->dev = &udc->gadget.dev; @@ -2155,6 +2155,9 @@ static int xudc_probe(struct platform_device *pdev) udc->dma_enabled ? "with DMA" : "without DMA"); return 0; + +err_disable_unprepare_clk: + clk_disable_unprepare(udc->clk); fail: dev_err(&pdev->dev, "probe failed, %d\n", ret); return ret; -- cgit v1.2.3 From 26288448120b28af1dfd85a6fa6b6d55a16c7f2f Mon Sep 17 00:00:00 2001 From: Albert Wang Date: Tue, 9 Nov 2021 17:26:42 +0800 Subject: usb: dwc3: gadget: Fix null pointer exception In the endpoint interrupt functions dwc3_gadget_endpoint_transfer_in_progress() and dwc3_gadget_endpoint_trbs_complete() will dereference the endpoint descriptor. But it could be cleared in __dwc3_gadget_ep_disable() when accessory disconnected. So we need to check whether it is null or not before dereferencing it. Fixes: f09ddcfcb8c5 ("usb: dwc3: gadget: Prevent EP queuing while stopping transfers") Cc: stable Reviewed-by: Jack Pham Signed-off-by: Albert Wang Link: https://lore.kernel.org/r/20211109092642.3507692-1-albertccwang@google.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/dwc3/gadget.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index daa8f8548a2e..7e3db00e9759 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -3263,6 +3263,9 @@ static bool dwc3_gadget_endpoint_trbs_complete(struct dwc3_ep *dep, struct dwc3 *dwc = dep->dwc; bool no_started_trb = true; + if (!dep->endpoint.desc) + return no_started_trb; + dwc3_gadget_ep_cleanup_completed_requests(dep, event, status); if (dep->flags & DWC3_EP_END_TRANSFER_PENDING) @@ -3310,6 +3313,9 @@ static void dwc3_gadget_endpoint_transfer_in_progress(struct dwc3_ep *dep, { int status = 0; + if (!dep->endpoint.desc) + return; + if (usb_endpoint_xfer_isoc(dep->endpoint.desc)) dwc3_gadget_endpoint_frame_from_event(dep, event); -- cgit v1.2.3 From 310780e825f3ffd211b479b8f828885a6faedd63 Mon Sep 17 00:00:00 2001 From: Nathan Chancellor Date: Fri, 5 Nov 2021 07:58:03 -0700 Subject: usb: dwc2: hcd_queue: Fix use of floating point literal A new commit in LLVM causes an error on the use of 'long double' when '-mno-x87' is used, which the kernel does through an alias, '-mno-80387' (see the LLVM commit below for more details around why it does this). drivers/usb/dwc2/hcd_queue.c:1744:25: error: expression requires 'long double' type support, but target 'x86_64-unknown-linux-gnu' does not support it delay = ktime_set(0, DWC2_RETRY_WAIT_DELAY); ^ drivers/usb/dwc2/hcd_queue.c:62:34: note: expanded from macro 'DWC2_RETRY_WAIT_DELAY' #define DWC2_RETRY_WAIT_DELAY (1 * 1E6L) ^ 1 error generated. This happens due to the use of a 'long double' literal. The 'E6' part of '1E6L' causes the literal to be a 'double' then the 'L' suffix promotes it to 'long double'. There is no visible reason for a floating point value in this driver, as the value is only used as a parameter to a function that expects an integer type. Use NSEC_PER_MSEC, which is the same integer value as '1E6L', to avoid changing functionality but fix the error. Link: https://github.com/ClangBuiltLinux/linux/issues/1497 Link: https://github.com/llvm/llvm-project/commit/a8083d42b1c346e21623a1d36d1f0cadd7801d83 Fixes: 6ed30a7d8ec2 ("usb: dwc2: host: use hrtimer for NAK retries") Cc: stable Reviewed-by: Nick Desaulniers Reviewed-by: John Keeping Acked-by: Minas Harutyunyan Signed-off-by: Nathan Chancellor Link: https://lore.kernel.org/r/20211105145802.2520658-1-nathan@kernel.org Signed-off-by: Greg Kroah-Hartman --- drivers/usb/dwc2/hcd_queue.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/dwc2/hcd_queue.c b/drivers/usb/dwc2/hcd_queue.c index 89a788326c56..24beff610cf2 100644 --- a/drivers/usb/dwc2/hcd_queue.c +++ b/drivers/usb/dwc2/hcd_queue.c @@ -59,7 +59,7 @@ #define DWC2_UNRESERVE_DELAY (msecs_to_jiffies(5)) /* If we get a NAK, wait this long before retrying */ -#define DWC2_RETRY_WAIT_DELAY (1 * 1E6L) +#define DWC2_RETRY_WAIT_DELAY (1 * NSEC_PER_MSEC) /** * dwc2_periodic_channel_available() - Checks that a channel is available for a -- cgit v1.2.3 From 47ce45906ca9870cf5267261f155fb7c70307cf0 Mon Sep 17 00:00:00 2001 From: Fabio Aiuto Date: Sat, 13 Nov 2021 15:29:59 +0100 Subject: usb: dwc3: leave default DMA for PCI devices in case of a PCI dwc3 controller, leave the default DMA mask. Calling of a 64 bit DMA mask breaks the driver on cherrytrail based tablets like Cyberbook T116. Fixes: 45d39448b4d0 ("usb: dwc3: support 64 bit DMA in platform driver") Cc: stable Reported-by: Hans De Goede Tested-by: Fabio Aiuto Tested-by: Hans de Goede Signed-off-by: Fabio Aiuto Link: https://lore.kernel.org/r/20211113142959.27191-1-fabioaiuto83@gmail.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/dwc3/core.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index 643239d7d370..f4c09951b517 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -1594,9 +1594,11 @@ static int dwc3_probe(struct platform_device *pdev) dwc3_get_properties(dwc); - ret = dma_set_mask_and_coherent(dwc->sysdev, DMA_BIT_MASK(64)); - if (ret) - return ret; + if (!dwc->sysdev_is_parent) { + ret = dma_set_mask_and_coherent(dwc->sysdev, DMA_BIT_MASK(64)); + if (ret) + return ret; + } dwc->reset = devm_reset_control_array_get_optional_shared(dev); if (IS_ERR(dwc->reset)) -- cgit v1.2.3 From 362468830dd5bea8bf6ad5203b2ea61f8a4e8288 Mon Sep 17 00:00:00 2001 From: Ondrej Jirman Date: Mon, 8 Nov 2021 11:28:32 +0100 Subject: usb: typec: fusb302: Fix masking of comparator and bc_lvl interrupts The code that enables either BC_LVL or COMP_CHNG interrupt in tcpm_set_cc wrongly assumes that the interrupt is unmasked by writing 1 to the apropriate bit in the mask register. In fact, interrupts are enabled when the mask is 0, so the tcpm_set_cc enables interrupt for COMP_CHNG when it expects BC_LVL interrupt to be enabled. This causes inability of the driver to recognize cable unplug events in host mode (unplug is recognized only via a COMP_CHNG interrupt). In device mode this bug was masked by simultaneous triggering of the VBUS change interrupt, because of loss of VBUS when the port peer is providing power. Fixes: 48242e30532b ("usb: typec: fusb302: Revert "Resolve fixed power role contract setup"") Cc: stable Cc: Hans de Goede Reviewed-by: Hans de Goede Acked-by: Heikki Krogerus Signed-off-by: Ondrej Jirman Link: https://lore.kernel.org/r/20211108102833.2793803-1-megous@megous.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/typec/tcpm/fusb302.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/usb/typec/tcpm/fusb302.c b/drivers/usb/typec/tcpm/fusb302.c index 7a2a17866a82..72f9001b0792 100644 --- a/drivers/usb/typec/tcpm/fusb302.c +++ b/drivers/usb/typec/tcpm/fusb302.c @@ -669,25 +669,27 @@ static int tcpm_set_cc(struct tcpc_dev *dev, enum typec_cc_status cc) ret = fusb302_i2c_mask_write(chip, FUSB_REG_MASK, FUSB_REG_MASK_BC_LVL | FUSB_REG_MASK_COMP_CHNG, - FUSB_REG_MASK_COMP_CHNG); + FUSB_REG_MASK_BC_LVL); if (ret < 0) { fusb302_log(chip, "cannot set SRC interrupt, ret=%d", ret); goto done; } chip->intr_comp_chng = true; + chip->intr_bc_lvl = false; break; case TYPEC_CC_RD: ret = fusb302_i2c_mask_write(chip, FUSB_REG_MASK, FUSB_REG_MASK_BC_LVL | FUSB_REG_MASK_COMP_CHNG, - FUSB_REG_MASK_BC_LVL); + FUSB_REG_MASK_COMP_CHNG); if (ret < 0) { fusb302_log(chip, "cannot set SRC interrupt, ret=%d", ret); goto done; } chip->intr_bc_lvl = true; + chip->intr_comp_chng = false; break; default: break; -- cgit v1.2.3 From 6ae6dc22d2d1ce6aa77a6da8a761e61aca216f8b Mon Sep 17 00:00:00 2001 From: Mathias Nyman Date: Tue, 16 Nov 2021 00:16:30 +0200 Subject: usb: hub: Fix usb enumeration issue due to address0 race xHC hardware can only have one slot in default state with address 0 waiting for a unique address at a time, otherwise "undefined behavior may occur" according to xhci spec 5.4.3.4 The address0_mutex exists to prevent this across both xhci roothubs. If hub_port_init() fails, it may unlock the mutex and exit with a xhci slot in default state. If the other xhci roothub calls hub_port_init() at this point we end up with two slots in default state. Make sure the address0_mutex protects the slot default state across hub_port_init() retries, until slot is addressed or disabled. Note, one known minor case is not fixed by this patch. If device needs to be reset during resume, but fails all hub_port_init() retries in usb_reset_and_verify_device(), then it's possible the slot is still left in default state when address0_mutex is unlocked. Cc: Fixes: 638139eb95d2 ("usb: hub: allow to process more usb hub events in parallel") Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20211115221630.871204-1-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hub.c | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-) diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 86658a81d284..00c3506324e4 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -4700,8 +4700,6 @@ hub_port_init(struct usb_hub *hub, struct usb_device *udev, int port1, if (oldspeed == USB_SPEED_LOW) delay = HUB_LONG_RESET_TIME; - mutex_lock(hcd->address0_mutex); - /* Reset the device; full speed may morph to high speed */ /* FIXME a USB 2.0 device may morph into SuperSpeed on reset. */ retval = hub_port_reset(hub, port1, udev, delay, false); @@ -5016,7 +5014,6 @@ fail: hub_port_disable(hub, port1, 0); update_devnum(udev, devnum); /* for disconnect processing */ } - mutex_unlock(hcd->address0_mutex); return retval; } @@ -5246,6 +5243,9 @@ static void hub_port_connect(struct usb_hub *hub, int port1, u16 portstatus, unit_load = 100; status = 0; + + mutex_lock(hcd->address0_mutex); + for (i = 0; i < PORT_INIT_TRIES; i++) { /* reallocate for each attempt, since references @@ -5282,6 +5282,8 @@ static void hub_port_connect(struct usb_hub *hub, int port1, u16 portstatus, if (status < 0) goto loop; + mutex_unlock(hcd->address0_mutex); + if (udev->quirks & USB_QUIRK_DELAY_INIT) msleep(2000); @@ -5370,6 +5372,7 @@ static void hub_port_connect(struct usb_hub *hub, int port1, u16 portstatus, loop_disable: hub_port_disable(hub, port1, 1); + mutex_lock(hcd->address0_mutex); loop: usb_ep0_reinit(udev); release_devnum(udev); @@ -5396,6 +5399,8 @@ loop: } done: + mutex_unlock(hcd->address0_mutex); + hub_port_disable(hub, port1, 1); if (hcd->driver->relinquish_port && !hub->hdev->parent) { if (status != -ENOTCONN && status != -ENODEV) @@ -5915,6 +5920,8 @@ static int usb_reset_and_verify_device(struct usb_device *udev) bos = udev->bos; udev->bos = NULL; + mutex_lock(hcd->address0_mutex); + for (i = 0; i < PORT_INIT_TRIES; ++i) { /* ep0 maxpacket size may change; let the HCD know about it. @@ -5924,6 +5931,7 @@ static int usb_reset_and_verify_device(struct usb_device *udev) if (ret >= 0 || ret == -ENOTCONN || ret == -ENODEV) break; } + mutex_unlock(hcd->address0_mutex); if (ret < 0) goto re_enumerate; -- cgit v1.2.3 From d4d2e5329ae9dfd6742c84d79f7d143d10410f1b Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Wed, 17 Nov 2021 10:49:23 +0300 Subject: usb: chipidea: ci_hdrc_imx: fix potential error pointer dereference in probe If the first call to devm_usb_get_phy_by_phandle(dev, "fsl,usbphy", 0) fails with something other than -ENODEV then it leads to an error pointer dereference. For those errors we should just jump directly to the error handling. Fixes: 8253a34bfae3 ("usb: chipidea: ci_hdrc_imx: Also search for 'phys' phandle") Cc: stable Signed-off-by: Dan Carpenter Link: https://lore.kernel.org/r/20211117074923.GF5237@kili Signed-off-by: Greg Kroah-Hartman --- drivers/usb/chipidea/ci_hdrc_imx.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/drivers/usb/chipidea/ci_hdrc_imx.c b/drivers/usb/chipidea/ci_hdrc_imx.c index f1d100671ee6..097142ffb184 100644 --- a/drivers/usb/chipidea/ci_hdrc_imx.c +++ b/drivers/usb/chipidea/ci_hdrc_imx.c @@ -420,15 +420,15 @@ static int ci_hdrc_imx_probe(struct platform_device *pdev) data->phy = devm_usb_get_phy_by_phandle(dev, "fsl,usbphy", 0); if (IS_ERR(data->phy)) { ret = PTR_ERR(data->phy); - if (ret == -ENODEV) { - data->phy = devm_usb_get_phy_by_phandle(dev, "phys", 0); - if (IS_ERR(data->phy)) { - ret = PTR_ERR(data->phy); - if (ret == -ENODEV) - data->phy = NULL; - else - goto err_clk; - } + if (ret != -ENODEV) + goto err_clk; + data->phy = devm_usb_get_phy_by_phandle(dev, "phys", 0); + if (IS_ERR(data->phy)) { + ret = PTR_ERR(data->phy); + if (ret == -ENODEV) + data->phy = NULL; + else + goto err_clk; } } -- cgit v1.2.3 From e353f3e88720300c3d72f49a4bea54f42db1fa5e Mon Sep 17 00:00:00 2001 From: Daniele Palmas Date: Fri, 19 Nov 2021 15:03:19 +0100 Subject: USB: serial: option: add Telit LE910S1 0x9200 composition Add the following Telit LE910S1 composition: 0x9200: tty Signed-off-by: Daniele Palmas Link: https://lore.kernel.org/r/20211119140319.10448-1-dnlplm@gmail.com Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold --- drivers/usb/serial/option.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index a484ff5e4ebf..0902e79c8493 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -1267,6 +1267,8 @@ static const struct usb_device_id option_ids[] = { .driver_info = NCTRL(2) }, { USB_DEVICE(TELIT_VENDOR_ID, 0x9010), /* Telit SBL FN980 flashing device */ .driver_info = NCTRL(0) | ZLP }, + { USB_DEVICE(TELIT_VENDOR_ID, 0x9200), /* Telit LE910S1 flashing device */ + .driver_info = NCTRL(0) | ZLP }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MF622, 0xff, 0xff, 0xff) }, /* ZTE WCDMA products */ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0002, 0xff, 0xff, 0xff), .driver_info = RSVD(1) }, -- cgit v1.2.3 From aa5721a9e0c9fb8a4bdfe0c8751377cd537d6174 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Tue, 23 Nov 2021 10:10:17 +0100 Subject: USB: serial: pl2303: fix GC type detection At least some PL2303GC have a bcdDevice of 0x105 instead of 0x100 as the datasheet claims. Add it to the list of known release numbers for the HXN (G) type. Note the chip type could only be determined indirectly based on its package being of QFP type, which appears to only be available for PL2303GC. Fixes: 894758d0571d ("USB: serial: pl2303: tighten type HXN (G) detection") Cc: stable@vger.kernel.org # 5.13 Reported-by: Anton Lundin Link: https://lore.kernel.org/r/20211123071613.GZ108031@montezuma.acc.umu.se Link: https://lore.kernel.org/r/20211123091017.30708-1-johan@kernel.org Signed-off-by: Johan Hovold --- drivers/usb/serial/pl2303.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index f45ca7ddf78e..a70fd86f735c 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -432,6 +432,7 @@ static int pl2303_detect_type(struct usb_serial *serial) case 0x200: switch (bcdDevice) { case 0x100: + case 0x105: case 0x305: case 0x405: /* -- cgit v1.2.3 From 6cca13de26eea6d32a98d96d916a048d16a12822 Mon Sep 17 00:00:00 2001 From: Mathias Nyman Date: Tue, 23 Nov 2021 12:16:56 +0200 Subject: usb: hub: Fix locking issues with address0_mutex Fix the circular lock dependency and unbalanced unlock of addess0_mutex introduced when fixing an address0_mutex enumeration retry race in commit ae6dc22d2d1 ("usb: hub: Fix usb enumeration issue due to address0 race") Make sure locking order between port_dev->status_lock and address0_mutex is correct, and that address0_mutex is not unlocked in hub_port_connect "done:" codepath which may be reached without locking address0_mutex Fixes: 6ae6dc22d2d1 ("usb: hub: Fix usb enumeration issue due to address0 race") Cc: Reported-by: Marek Szyprowski Tested-by: Hans de Goede Tested-by: Marek Szyprowski Acked-by: Hans de Goede Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20211123101656.1113518-1-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hub.c | 20 ++++++++++++-------- 1 file changed, 12 insertions(+), 8 deletions(-) diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 00c3506324e4..00070a8a6507 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -5188,6 +5188,7 @@ static void hub_port_connect(struct usb_hub *hub, int port1, u16 portstatus, struct usb_port *port_dev = hub->ports[port1 - 1]; struct usb_device *udev = port_dev->child; static int unreliable_port = -1; + bool retry_locked; /* Disconnect any existing devices under this port */ if (udev) { @@ -5244,10 +5245,10 @@ static void hub_port_connect(struct usb_hub *hub, int port1, u16 portstatus, status = 0; - mutex_lock(hcd->address0_mutex); - for (i = 0; i < PORT_INIT_TRIES; i++) { - + usb_lock_port(port_dev); + mutex_lock(hcd->address0_mutex); + retry_locked = true; /* reallocate for each attempt, since references * to the previous one can escape in various ways */ @@ -5255,6 +5256,8 @@ static void hub_port_connect(struct usb_hub *hub, int port1, u16 portstatus, if (!udev) { dev_err(&port_dev->dev, "couldn't allocate usb_device\n"); + mutex_unlock(hcd->address0_mutex); + usb_unlock_port(port_dev); goto done; } @@ -5276,13 +5279,13 @@ static void hub_port_connect(struct usb_hub *hub, int port1, u16 portstatus, } /* reset (non-USB 3.0 devices) and get descriptor */ - usb_lock_port(port_dev); status = hub_port_init(hub, udev, port1, i); - usb_unlock_port(port_dev); if (status < 0) goto loop; mutex_unlock(hcd->address0_mutex); + usb_unlock_port(port_dev); + retry_locked = false; if (udev->quirks & USB_QUIRK_DELAY_INIT) msleep(2000); @@ -5372,11 +5375,14 @@ static void hub_port_connect(struct usb_hub *hub, int port1, u16 portstatus, loop_disable: hub_port_disable(hub, port1, 1); - mutex_lock(hcd->address0_mutex); loop: usb_ep0_reinit(udev); release_devnum(udev); hub_free_dev(udev); + if (retry_locked) { + mutex_unlock(hcd->address0_mutex); + usb_unlock_port(port_dev); + } usb_put_dev(udev); if ((status == -ENOTCONN) || (status == -ENOTSUPP)) break; @@ -5399,8 +5405,6 @@ loop: } done: - mutex_unlock(hcd->address0_mutex); - hub_port_disable(hub, port1, 1); if (hcd->driver->relinquish_port && !hub->hdev->parent) { if (status != -ENOTCONN && status != -ENODEV) -- cgit v1.2.3 From 7b9c90e3e6a13d89048717f846ba664dfbd4c6c7 Mon Sep 17 00:00:00 2001 From: Hector Martin Date: Sat, 20 Nov 2021 12:07:16 +0900 Subject: usb: typec: tipd: Fix typo in cd321x_switch_power_state SPSS should've been SSPS. Fixes: c9c14be664cf ("usb: typec: tipd: Switch CD321X power state to S0") Reviewed-by: Heikki Krogerus Reviewed-by: Sven Peter Signed-off-by: Hector Martin Link: https://lore.kernel.org/r/20211120030717.84287-2-marcan@marcan.st Signed-off-by: Greg Kroah-Hartman --- drivers/usb/typec/tipd/core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/typec/tipd/core.c b/drivers/usb/typec/tipd/core.c index fb8ef12bbe9c..4da5a0b2aed2 100644 --- a/drivers/usb/typec/tipd/core.c +++ b/drivers/usb/typec/tipd/core.c @@ -653,7 +653,7 @@ static int cd321x_switch_power_state(struct tps6598x *tps, u8 target_state) if (state == target_state) return 0; - ret = tps6598x_exec_cmd(tps, "SPSS", sizeof(u8), &target_state, 0, NULL); + ret = tps6598x_exec_cmd(tps, "SSPS", sizeof(u8), &target_state, 0, NULL); if (ret) return ret; -- cgit v1.2.3 From 113972d2e111304553d4d3226f49d18ea4b7f2f7 Mon Sep 17 00:00:00 2001 From: Hector Martin Date: Sat, 20 Nov 2021 12:07:17 +0900 Subject: usb: typec: tipd: Fix initialization sequence for cd321x The power state switch needs to happen first, as that kickstarts the firmware into normal mode. Fixes: c9c14be664cf ("usb: typec: tipd: Switch CD321X power state to S0") Reviewed-by: Heikki Krogerus Reviewed-by: Sven Peter Signed-off-by: Hector Martin Link: https://lore.kernel.org/r/20211120030717.84287-3-marcan@marcan.st Signed-off-by: Greg Kroah-Hartman --- drivers/usb/typec/tipd/core.c | 33 ++++++++++++++++----------------- 1 file changed, 16 insertions(+), 17 deletions(-) diff --git a/drivers/usb/typec/tipd/core.c b/drivers/usb/typec/tipd/core.c index 4da5a0b2aed2..6d27a5b5e3ca 100644 --- a/drivers/usb/typec/tipd/core.c +++ b/drivers/usb/typec/tipd/core.c @@ -707,6 +707,7 @@ static int tps6598x_probe(struct i2c_client *client) u32 conf; u32 vid; int ret; + u64 mask1; tps = devm_kzalloc(&client->dev, sizeof(*tps), GFP_KERNEL); if (!tps) @@ -730,11 +731,6 @@ static int tps6598x_probe(struct i2c_client *client) if (i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) tps->i2c_protocol = true; - /* Make sure the controller has application firmware running */ - ret = tps6598x_check_mode(tps); - if (ret) - return ret; - if (np && of_device_is_compatible(np, "apple,cd321x")) { /* Switch CD321X chips to the correct system power state */ ret = cd321x_switch_power_state(tps, TPS_SYSTEM_POWER_STATE_S0); @@ -742,24 +738,27 @@ static int tps6598x_probe(struct i2c_client *client) return ret; /* CD321X chips have all interrupts masked initially */ - ret = tps6598x_write64(tps, TPS_REG_INT_MASK1, - APPLE_CD_REG_INT_POWER_STATUS_UPDATE | - APPLE_CD_REG_INT_DATA_STATUS_UPDATE | - APPLE_CD_REG_INT_PLUG_EVENT); - if (ret) - return ret; + mask1 = APPLE_CD_REG_INT_POWER_STATUS_UPDATE | + APPLE_CD_REG_INT_DATA_STATUS_UPDATE | + APPLE_CD_REG_INT_PLUG_EVENT; irq_handler = cd321x_interrupt; } else { /* Enable power status, data status and plug event interrupts */ - ret = tps6598x_write64(tps, TPS_REG_INT_MASK1, - TPS_REG_INT_POWER_STATUS_UPDATE | - TPS_REG_INT_DATA_STATUS_UPDATE | - TPS_REG_INT_PLUG_EVENT); - if (ret) - return ret; + mask1 = TPS_REG_INT_POWER_STATUS_UPDATE | + TPS_REG_INT_DATA_STATUS_UPDATE | + TPS_REG_INT_PLUG_EVENT; } + /* Make sure the controller has application firmware running */ + ret = tps6598x_check_mode(tps); + if (ret) + return ret; + + ret = tps6598x_write64(tps, TPS_REG_INT_MASK1, mask1); + if (ret) + return ret; + ret = tps6598x_read32(tps, TPS_REG_STATUS, &status); if (ret < 0) return ret; -- cgit v1.2.3 From 88459e3e42760abb2299bbf6cb1026491170e02a Mon Sep 17 00:00:00 2001 From: Mingjie Zhang Date: Tue, 23 Nov 2021 21:37:57 +0800 Subject: USB: serial: option: add Fibocom FM101-GL variants Update the USB serial option driver support for the Fibocom FM101-GL Cat.6 LTE modules as there are actually several different variants. - VID:PID 2cb7:01a2, FM101-GL are laptop M.2 cards (with MBIM interfaces for /Linux/Chrome OS) - VID:PID 2cb7:01a4, FM101-GL for laptop debug M.2 cards(with adb interface for /Linux/Chrome OS) 0x01a2: mbim, tty, tty, diag, gnss 0x01a4: mbim, diag, tty, adb, gnss, gnss Here are the outputs of lsusb -v and usb-devices: T: Bus=02 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#= 86 Spd=5000 MxCh= 0 D: Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1 P: Vendor=2cb7 ProdID=01a2 Rev= 5.04 S: Manufacturer=Fibocom Wireless Inc. S: Product=Fibocom FM101-GL Module S: SerialNumber=673326ce C:* #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=896mA A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00 I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=(none) I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=(none) I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=(none) I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=(none) Bus 002 Device 084: ID 2cb7:01a2 Fibocom Wireless Inc. Fibocom FM101-GL Module Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 3.20 bDeviceClass 0 bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 9 idVendor 0x2cb7 idProduct 0x01a2 bcdDevice 5.04 iManufacturer 1 Fibocom Wireless Inc. iProduct 2 Fibocom FM101-GL Module iSerial 3 673326ce bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 0x015d bNumInterfaces 6 bConfigurationValue 1 iConfiguration 4 MBIM_DUN_DUN_DIAG_NMEA bmAttributes 0xa0 (Bus Powered) Remote Wakeup MaxPower 896mA Interface Association: bLength 8 bDescriptorType 11 bFirstInterface 0 bInterfaceCount 2 bFunctionClass 2 Communications bFunctionSubClass 14 bFunctionProtocol 0 iFunction 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 2 Communications bInterfaceSubClass 14 bInterfaceProtocol 0 iInterface 5 Fibocom FM101-GL LTE Modem CDC Header: bcdCDC 1.10 CDC Union: bMasterInterface 0 bSlaveInterface 1 CDC MBIM: bcdMBIMVersion 1.00 wMaxControlMessage 4096 bNumberFilters 32 bMaxFilterSize 128 wMaxSegmentSize 2048 bmNetworkCapabilities 0x20 8-byte ntb input size CDC MBIM Extended: bcdMBIMExtendedVersion 1.00 bMaxOutstandingCommandMessages 64 wMTU 1500 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 9 bMaxBurst 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 0 bInterfaceClass 10 CDC Data bInterfaceSubClass 0 bInterfaceProtocol 2 iInterface 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 1 bNumEndpoints 2 bInterfaceClass 10 CDC Data bInterfaceSubClass 0 bInterfaceProtocol 2 iInterface 6 MBIM Data Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x8e EP 14 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 6 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x0f EP 15 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 2 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 2 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 64 iInterface 0 ** UNRECOGNIZED: 05 24 00 10 01 ** UNRECOGNIZED: 05 24 01 00 00 ** UNRECOGNIZED: 04 24 02 02 ** UNRECOGNIZED: 05 24 06 00 00 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x000a 1x 10 bytes bInterval 9 bMaxBurst 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 3 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 64 iInterface 0 ** UNRECOGNIZED: 05 24 00 10 01 ** UNRECOGNIZED: 05 24 01 00 00 ** UNRECOGNIZED: 04 24 02 02 ** UNRECOGNIZED: 05 24 06 00 00 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x85 EP 5 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x000a 1x 10 bytes bInterval 9 bMaxBurst 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x84 EP 4 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 4 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 48 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x03 EP 3 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x86 EP 6 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 5 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 64 iInterface 0 ** UNRECOGNIZED: 05 24 00 10 01 ** UNRECOGNIZED: 05 24 01 00 00 ** UNRECOGNIZED: 04 24 02 02 ** UNRECOGNIZED: 05 24 06 00 00 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x88 EP 8 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x000a 1x 10 bytes bInterval 9 bMaxBurst 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x87 EP 7 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x04 EP 4 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 0 T: Bus=02 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#= 85 Spd=5000 MxCh= 0 D: Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1 P: Vendor=2cb7 ProdID=01a4 Rev= 5.04 S: Manufacturer=Fibocom Wireless Inc. S: Product=Fibocom FM101-GL Module S: SerialNumber=673326ce C:* #Ifs= 7 Cfg#= 1 Atr=a0 MxPwr=896mA A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00 I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=(none) I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=(none) I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=(none) I:* If#= 6 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=(none) Bus 002 Device 085: ID 2cb7:01a4 Fibocom Wireless Inc. Fibocom FM101-GL Module Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 3.20 bDeviceClass 0 bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 9 idVendor 0x2cb7 idProduct 0x01a4 bcdDevice 5.04 iManufacturer 1 Fibocom Wireless Inc. iProduct 2 Fibocom FM101-GL Module iSerial 3 673326ce bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 0x0180 bNumInterfaces 7 bConfigurationValue 1 iConfiguration 4 MBIM_DIAG_DUN_ADB_GNSS_GNSS bmAttributes 0xa0 (Bus Powered) Remote Wakeup MaxPower 896mA Interface Association: bLength 8 bDescriptorType 11 bFirstInterface 0 bInterfaceCount 2 bFunctionClass 2 Communications bFunctionSubClass 14 bFunctionProtocol 0 iFunction 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 2 Communications bInterfaceSubClass 14 bInterfaceProtocol 0 iInterface 5 Fibocom FM101-GL LTE Modem CDC Header: bcdCDC 1.10 CDC Union: bMasterInterface 0 bSlaveInterface 1 CDC MBIM: bcdMBIMVersion 1.00 wMaxControlMessage 4096 bNumberFilters 32 bMaxFilterSize 128 wMaxSegmentSize 2048 bmNetworkCapabilities 0x20 8-byte ntb input size CDC MBIM Extended: bcdMBIMExtendedVersion 1.00 bMaxOutstandingCommandMessages 64 wMTU 1500 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 9 bMaxBurst 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 0 bInterfaceClass 10 CDC Data bInterfaceSubClass 0 bInterfaceProtocol 2 iInterface 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 1 bNumEndpoints 2 bInterfaceClass 10 CDC Data bInterfaceSubClass 0 bInterfaceProtocol 2 iInterface 6 MBIM Data Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x8e EP 14 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 6 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x0f EP 15 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 2 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 2 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 48 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 3 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 64 iInterface 0 ** UNRECOGNIZED: 05 24 00 10 01 ** UNRECOGNIZED: 05 24 01 00 00 ** UNRECOGNIZED: 04 24 02 02 ** UNRECOGNIZED: 05 24 06 00 00 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x84 EP 4 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x000a 1x 10 bytes bInterval 9 bMaxBurst 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 4 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 66 bInterfaceProtocol 1 iInterface 8 ADB Interface Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x03 EP 3 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x85 EP 5 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 5 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 64 iInterface 0 ** UNRECOGNIZED: 05 24 00 10 01 ** UNRECOGNIZED: 05 24 01 00 00 ** UNRECOGNIZED: 04 24 02 02 ** UNRECOGNIZED: 05 24 06 00 00 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x87 EP 7 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x000a 1x 10 bytes bInterval 9 bMaxBurst 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x86 EP 6 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x04 EP 4 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 6 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 64 iInterface 0 ** UNRECOGNIZED: 05 24 00 10 01 ** UNRECOGNIZED: 05 24 01 00 00 ** UNRECOGNIZED: 04 24 02 02 ** UNRECOGNIZED: 05 24 06 00 00 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x89 EP 9 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x000a 1x 10 bytes bInterval 9 bMaxBurst 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x88 EP 8 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x05 EP 5 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 0 Signed-off-by: Mingjie Zhang Link: https://lore.kernel.org/r/20211123133757.37475-1-superzmj@fibocom.com Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold --- drivers/usb/serial/option.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 0902e79c8493..546fce4617a8 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -2096,6 +2096,9 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(0x2cb7, 0x010b, 0xff, 0xff, 0x30) }, /* Fibocom FG150 Diag */ { USB_DEVICE_AND_INTERFACE_INFO(0x2cb7, 0x010b, 0xff, 0, 0) }, /* Fibocom FG150 AT */ { USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x01a0, 0xff) }, /* Fibocom NL668-AM/NL652-EU (laptop MBIM) */ + { USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x01a2, 0xff) }, /* Fibocom FM101-GL (laptop MBIM) */ + { USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x01a4, 0xff), /* Fibocom FM101-GL (laptop MBIM) */ + .driver_info = RSVD(4) }, { USB_DEVICE_INTERFACE_CLASS(0x2df3, 0x9d03, 0xff) }, /* LongSung M5710 */ { USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1404, 0xff) }, /* GosunCn GM500 RNDIS */ { USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1405, 0xff) }, /* GosunCn GM500 MBIM */ -- cgit v1.2.3