From b0ddc5b170058a9ed3c9f031501d735a4eb8ee89 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 22 Apr 2021 17:15:21 +0200 Subject: rtc: bd70528: fix BD71815 watchdog dependency The added Kconfig dependency is slightly incorrect, which can lead to a link failure when the watchdog is a loadable module: arm-linux-gnueabi-ld: drivers/rtc/rtc-bd70528.o: in function `bd70528_set_rtc_based_timers': rtc-bd70528.c:(.text+0x6cc): undefined reference to `bd70528_wdt_set' arm-linux-gnueabi-ld: drivers/rtc/rtc-bd70528.o: in function `bd70528_set_time': rtc-bd70528.c:(.text+0xaa0): undefined reference to `bd70528_wdt_lock' arm-linux-gnueabi-ld: rtc-bd70528.c:(.text+0xab8): undefined reference to `bd70528_wdt_unlock' arm-linux-gnueabi-ld: drivers/rtc/rtc-bd70528.o: in function `bd70528_alm_enable': rtc-bd70528.c:(.text+0xfc0): undefined reference to `bd70528_wdt_lock' arm-linux-gnueabi-ld: rtc-bd70528.c:(.text+0x1030): undefined reference to `bd70528_wdt_unlock' The problem is that it allows to be built-in if MFD_ROHM_BD71828 is built-in, even when the watchdog is a loadable module. Rework this so that having the watchdog as a loadable module always forces the rtc to be a module as well instead of built-in, regardless of bd71828. Fixes: c56dc069f268 ("rtc: bd70528: Support RTC on ROHM BD71815") Signed-off-by: Arnd Bergmann Reviewed-by: Guenter Roeck Reviewed-by: Matti Vaittinen Acked-by: Randy Dunlap # build-tested Signed-off-by: Alexandre Belloni Link: https://lore.kernel.org/r/20210422151545.2403356-1-arnd@kernel.org --- drivers/rtc/Kconfig | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig index d8c13fded164..914497abeef9 100644 --- a/drivers/rtc/Kconfig +++ b/drivers/rtc/Kconfig @@ -502,7 +502,8 @@ config RTC_DRV_M41T80_WDT config RTC_DRV_BD70528 tristate "ROHM BD70528, BD71815 and BD71828 PMIC RTC" - depends on MFD_ROHM_BD71828 || MFD_ROHM_BD70528 && (BD70528_WATCHDOG || !BD70528_WATCHDOG) + depends on MFD_ROHM_BD71828 || MFD_ROHM_BD70528 + depends on BD70528_WATCHDOG || !BD70528_WATCHDOG help If you say Y here you will get support for the RTC block on ROHM BD70528, BD71815 and BD71828 Power Management IC. -- cgit v1.2.3 From f765e349c3e1f2e676ad4bd61197216b26976022 Mon Sep 17 00:00:00 2001 From: Sebastian Reichel Date: Thu, 29 Apr 2021 00:29:49 +0200 Subject: rtc: m41t80: add support for fixed clock Congatec's QMX6 system on module (SoM) uses a m41t62 as RTC. The modules SQW clock output defaults to 32768 Hz. This behaviour is used to provide the i.MX6 CKIL clock. Once the RTC driver is probed, the clock is disabled and all i.MX6 functionality depending on the 32 KHz clock has undefined behaviour. For example when using the hardware watchdog the system will likely do arbitrary reboots. Referencing the m41t62 directly results in a deadlock. The kernel will see, that i.MX6 system clock needs the RTC clock and do probe deferral. But the i.MX6 I2C module never becomes usable without the i.MX6 CKIL clock and thus the RTC's clock will not be probed. So from the kernel's perspective this is a chicken-and-egg problem. Technically everything is fine by not touching anything, since the RTC clock correctly enables the clock on reset (i.e. on battery backup power loss) and also the bootloader enables it in case an something (e.g. an unpatched kernel) disabled this incorrectly. A workaround for this issue is describing the square wave pin as fixed-clock, which is registered early and basically how this pin is used on the i.MX6. Suggested-by: Saravana Kannan Signed-off-by: Sebastian Reichel Reviewed-by: Saravana Kannan Reviewed-by: Rob Herring Signed-off-by: Alexandre Belloni Link: https://lore.kernel.org/r/20210428222953.235280-2-sebastian.reichel@collabora.com --- Documentation/devicetree/bindings/rtc/rtc-m41t80.txt | 9 +++++++++ drivers/rtc/rtc-m41t80.c | 12 ++++++++++++ 2 files changed, 21 insertions(+) diff --git a/Documentation/devicetree/bindings/rtc/rtc-m41t80.txt b/Documentation/devicetree/bindings/rtc/rtc-m41t80.txt index c746cb221210..cdd196b1e9bd 100644 --- a/Documentation/devicetree/bindings/rtc/rtc-m41t80.txt +++ b/Documentation/devicetree/bindings/rtc/rtc-m41t80.txt @@ -21,10 +21,19 @@ Optional properties: clock name - wakeup-source: Enables wake up of host system on alarm +Optional child node: +- clock: Provide this if the square wave pin is used as boot-enabled fixed clock. + Example: rtc@68 { compatible = "st,m41t80"; reg = <0x68>; interrupt-parent = <&UIC0>; interrupts = <0x9 0x8>; + + clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; }; diff --git a/drivers/rtc/rtc-m41t80.c b/drivers/rtc/rtc-m41t80.c index 89128fc29ccc..b3ece42b6f90 100644 --- a/drivers/rtc/rtc-m41t80.c +++ b/drivers/rtc/rtc-m41t80.c @@ -544,10 +544,22 @@ static struct clk *m41t80_sqw_register_clk(struct m41t80_data *m41t80) { struct i2c_client *client = m41t80->client; struct device_node *node = client->dev.of_node; + struct device_node *fixed_clock; struct clk *clk; struct clk_init_data init; int ret; + fixed_clock = of_get_child_by_name(node, "clock"); + if (fixed_clock) { + /* + * skip registering square wave clock when a fixed + * clock has been registered. The fixed clock is + * registered automatically when being referenced. + */ + of_node_put(fixed_clock); + return 0; + } + /* First disable the clock */ ret = i2c_smbus_read_byte_data(client, M41T80_REG_ALARM_MON); if (ret < 0) -- cgit v1.2.3 From 206e04ec7539e7bfdde9aa79a7cde656c9eb308e Mon Sep 17 00:00:00 2001 From: Bixuan Cui Date: Sat, 8 May 2021 11:15:09 +0800 Subject: rtc: mxc_v2: add missing MODULE_DEVICE_TABLE This patch adds missing MODULE_DEVICE_TABLE definition which generates correct modalias for automatic loading of this driver when it is built as an external module. Reported-by: Hulk Robot Signed-off-by: Bixuan Cui Signed-off-by: Alexandre Belloni Link: https://lore.kernel.org/r/20210508031509.53735-1-cuibixuan@huawei.com --- drivers/rtc/rtc-mxc_v2.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/rtc/rtc-mxc_v2.c b/drivers/rtc/rtc-mxc_v2.c index a577a74aaf75..5e0383401629 100644 --- a/drivers/rtc/rtc-mxc_v2.c +++ b/drivers/rtc/rtc-mxc_v2.c @@ -372,6 +372,7 @@ static const struct of_device_id mxc_ids[] = { { .compatible = "fsl,imx53-rtc", }, {} }; +MODULE_DEVICE_TABLE(of, mxc_ids); static struct platform_driver mxc_rtc_driver = { .driver = { -- cgit v1.2.3 From 8df65d4adca654180a5c05ecb853c15d1d74e410 Mon Sep 17 00:00:00 2001 From: Corentin Labbe Date: Mon, 10 May 2021 18:25:05 +0000 Subject: dt-bindings: convert rtc/faraday,ftrtc01 to yaml Converts rtc/faraday,ftrtc01.txt to yaml. This permits to detect some missing properties: reg, resets, interrupts Reviewed-by: Linus Walleij Signed-off-by: Corentin Labbe Reviewed-by: Rob Herring Signed-off-by: Alexandre Belloni Link: https://lore.kernel.org/r/20210510182505.3968936-1-clabbe@baylibre.com --- .../devicetree/bindings/rtc/faraday,ftrtc010.txt | 28 ---------- .../devicetree/bindings/rtc/faraday,ftrtc010.yaml | 59 ++++++++++++++++++++++ 2 files changed, 59 insertions(+), 28 deletions(-) delete mode 100644 Documentation/devicetree/bindings/rtc/faraday,ftrtc010.txt create mode 100644 Documentation/devicetree/bindings/rtc/faraday,ftrtc010.yaml diff --git a/Documentation/devicetree/bindings/rtc/faraday,ftrtc010.txt b/Documentation/devicetree/bindings/rtc/faraday,ftrtc010.txt deleted file mode 100644 index e3938f5e0b6c..000000000000 --- a/Documentation/devicetree/bindings/rtc/faraday,ftrtc010.txt +++ /dev/null @@ -1,28 +0,0 @@ -* Faraday Technology FTRTC010 Real Time Clock - -This RTC appears in for example the Storlink Gemini family of -SoCs. - -Required properties: -- compatible : Should be one of: - "faraday,ftrtc010" - "cortina,gemini-rtc", "faraday,ftrtc010" - -Optional properties: -- clocks: when present should contain clock references to the - PCLK and EXTCLK clocks. Faraday calls the later CLK1HZ and - says the clock should be 1 Hz, but implementers actually seem - to choose different clocks here, like Cortina who chose - 32768 Hz (a typical low-power clock). -- clock-names: should name the clocks "PCLK" and "EXTCLK" - respectively. - -Examples: - -rtc@45000000 { - compatible = "cortina,gemini-rtc"; - reg = <0x45000000 0x100>; - interrupts = <17 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&foo 0>, <&foo 1>; - clock-names = "PCLK", "EXTCLK"; -}; diff --git a/Documentation/devicetree/bindings/rtc/faraday,ftrtc010.yaml b/Documentation/devicetree/bindings/rtc/faraday,ftrtc010.yaml new file mode 100644 index 000000000000..657c13b62b67 --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/faraday,ftrtc010.yaml @@ -0,0 +1,59 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/rtc/faraday,ftrtc010.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Faraday Technology FTRTC010 Real Time Clock + +maintainers: + - Linus Walleij + +description: | + This RTC appears in for example the Storlink Gemini family of SoCs. + +properties: + compatible: + oneOf: + - const: faraday,ftrtc010 + - items: + - const: cortina,gemini-rtc + - const: faraday,ftrtc010 + + resets: + maxItems: 1 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + minItems: 2 + items: + - description: PCLK clocks + - description: EXTCLK clocks. Faraday calls it CLK1HZ and says the clock + should be 1 Hz, but implementers actually seem to choose different + clocks here, like Cortina who chose 32768 Hz (a typical low-power clock). + + clock-names: + items: + - const: "PCLK" + - const: "EXTCLK" + +required: + - compatible + +additionalProperties: false + +examples: + - | + #include + rtc@45000000 { + compatible = "cortina,gemini-rtc", "faraday,ftrtc010"; + reg = <0x45000000 0x100>; + interrupts = <17 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&foo 0>, <&foo 1>; + clock-names = "PCLK", "EXTCLK"; + }; -- cgit v1.2.3 From 54b909436ede47e0ee07f1765da27ec2efa41e84 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Tue, 11 May 2021 10:19:26 +0300 Subject: rtc: fix snprintf() checking in is_rtc_hctosys() The scnprintf() function silently truncates the printf() and returns the number bytes that it was able to copy (not counting the NUL terminator). Thus, the highest value it can return here is "NAME_SIZE - 1" and the overflow check is dead code. Fix this by using the snprintf() function which returns the number of bytes that would have been copied if there was enough space and changing the condition from "> NAME_SIZE" to ">= NAME_SIZE". Fixes: 92589c986b33 ("rtc-proc: permit the /proc/driver/rtc device to use other devices") Signed-off-by: Dan Carpenter Signed-off-by: Alexandre Belloni Link: https://lore.kernel.org/r/YJov/pcGmhLi2pEl@mwanda --- drivers/rtc/proc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/rtc/proc.c b/drivers/rtc/proc.c index 73344598fc1b..cbcdbb19d848 100644 --- a/drivers/rtc/proc.c +++ b/drivers/rtc/proc.c @@ -23,8 +23,8 @@ static bool is_rtc_hctosys(struct rtc_device *rtc) int size; char name[NAME_SIZE]; - size = scnprintf(name, NAME_SIZE, "rtc%d", rtc->id); - if (size > NAME_SIZE) + size = snprintf(name, NAME_SIZE, "rtc%d", rtc->id); + if (size >= NAME_SIZE) return false; return !strncmp(name, CONFIG_RTC_HCTOSYS_DEVICE, NAME_SIZE); -- cgit v1.2.3 From 37401019fe32b37c78b50163e4b4ffc2dbce4830 Mon Sep 17 00:00:00 2001 From: Shaokun Zhang Date: Mon, 24 May 2021 17:33:54 +0800 Subject: rtc: efi: Remove the repeated module alias 'MODULE_ALIAS' is declared twice, cleanup one. Cc: Alessandro Zummo Cc: Alexandre Belloni Signed-off-by: Shaokun Zhang Signed-off-by: Alexandre Belloni Link: https://lore.kernel.org/r/1621848834-20857-1-git-send-email-zhangshaokun@hisilicon.com --- drivers/rtc/rtc-efi.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/rtc/rtc-efi.c b/drivers/rtc/rtc-efi.c index edb64debd173..138c5e0046c8 100644 --- a/drivers/rtc/rtc-efi.c +++ b/drivers/rtc/rtc-efi.c @@ -280,7 +280,6 @@ static struct platform_driver efi_rtc_driver = { module_platform_driver_probe(efi_rtc_driver, efi_rtc_probe); -MODULE_ALIAS("platform:rtc-efi"); MODULE_AUTHOR("dann frazier "); MODULE_LICENSE("GPL"); MODULE_DESCRIPTION("EFI RTC driver"); -- cgit v1.2.3 From bcae59d0d45b866d5b9525ea8ece6d671e6767c8 Mon Sep 17 00:00:00 2001 From: Martin Kaiser Date: Tue, 11 May 2021 18:12:44 +0200 Subject: rtc: imxdi: add wakeup support The DryIce-based RTC supports alarms that trigger an interrupt. Configure this interrupt as a wakeup source that wakes the system up from standby mode. Signed-off-by: Martin Kaiser Signed-off-by: Alexandre Belloni Link: https://lore.kernel.org/r/20210511161244.16111-1-martin@kaiser.cx --- drivers/rtc/rtc-imxdi.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/rtc/rtc-imxdi.c b/drivers/rtc/rtc-imxdi.c index c1806f4d68e7..4b712e5ab08a 100644 --- a/drivers/rtc/rtc-imxdi.c +++ b/drivers/rtc/rtc-imxdi.c @@ -24,6 +24,7 @@ #include #include #include +#include #include #include #include @@ -811,6 +812,9 @@ static int __init dryice_rtc_probe(struct platform_device *pdev) platform_set_drvdata(pdev, imxdi); + device_init_wakeup(&pdev->dev, true); + dev_pm_set_wake_irq(&pdev->dev, norm_irq); + imxdi->rtc->ops = &dryice_rtc_ops; imxdi->rtc->range_max = U32_MAX; -- cgit v1.2.3 From a8fdbefd75f660b471112d7d0bf583adf78f5c34 Mon Sep 17 00:00:00 2001 From: Yang Yingliang Date: Mon, 17 May 2021 12:59:01 +0800 Subject: rtc: sysfs: Correct kerneldoc function name hctosys_show() Fix the following make W=1 kernel build warning: drivers/rtc/sysfs.c:115: warning: expecting prototype for rtc_sysfs_show_hctosys(). Prototype was for hctosys_show() instead Signed-off-by: Yang Yingliang Signed-off-by: Alexandre Belloni Link: https://lore.kernel.org/r/20210517045901.3461800-1-yangyingliang@huawei.com --- drivers/rtc/sysfs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/rtc/sysfs.c b/drivers/rtc/sysfs.c index 74026f67fdfb..00f1945bcb7e 100644 --- a/drivers/rtc/sysfs.c +++ b/drivers/rtc/sysfs.c @@ -102,7 +102,7 @@ max_user_freq_store(struct device *dev, struct device_attribute *attr, static DEVICE_ATTR_RW(max_user_freq); /** - * rtc_sysfs_show_hctosys - indicate if the given RTC set the system time + * hctosys_show - indicate if the given RTC set the system time * @dev: The device that the attribute belongs to. * @attr: The attribute being read. * @buf: The result buffer. -- cgit v1.2.3 From b958da7919e2c325ba8c6e34c947f745e5c66cef Mon Sep 17 00:00:00 2001 From: Yang Yingliang Date: Mon, 17 May 2021 19:06:41 +0800 Subject: rtc: m41t80: correct kerneldoc function names Fix the following make W=1 kernel build warnings: drivers/rtc/rtc-m41t80.c:811: warning: expecting prototype for wdt_close(). Prototype was for wdt_release() instead drivers/rtc/rtc-m41t80.c:830: warning: expecting prototype for notify_sys(). Prototype was for wdt_notify_sys() instead Signed-off-by: Yang Yingliang Reviewed-by: Randy Dunlap Signed-off-by: Alexandre Belloni Link: https://lore.kernel.org/r/20210517110641.473386-1-yangyingliang@huawei.com --- drivers/rtc/rtc-m41t80.c | 20 ++++++++------------ 1 file changed, 8 insertions(+), 12 deletions(-) diff --git a/drivers/rtc/rtc-m41t80.c b/drivers/rtc/rtc-m41t80.c index b3ece42b6f90..f736f8c22e96 100644 --- a/drivers/rtc/rtc-m41t80.c +++ b/drivers/rtc/rtc-m41t80.c @@ -611,10 +611,8 @@ static unsigned long wdt_is_open; static int boot_flag; /** - * wdt_ping: - * - * Reload counter one with the watchdog timeout. We don't bother reloading - * the cascade counter. + * wdt_ping - Reload counter one with the watchdog timeout. + * We don't bother reloading the cascade counter. */ static void wdt_ping(void) { @@ -650,9 +648,7 @@ static void wdt_ping(void) } /** - * wdt_disable: - * - * disables watchdog. + * wdt_disable - disables watchdog. */ static void wdt_disable(void) { @@ -689,7 +685,7 @@ static void wdt_disable(void) } /** - * wdt_write: + * wdt_write - write to watchdog. * @file: file handle to the watchdog * @buf: buffer to write (unused as data does not matter here * @count: count of bytes @@ -715,7 +711,7 @@ static ssize_t wdt_read(struct file *file, char __user *buf, } /** - * wdt_ioctl: + * wdt_ioctl - ioctl handler to set watchdog. * @file: file handle to the device * @cmd: watchdog command * @arg: argument pointer @@ -790,7 +786,7 @@ static long wdt_unlocked_ioctl(struct file *file, unsigned int cmd, } /** - * wdt_open: + * wdt_open - open a watchdog. * @inode: inode of device * @file: file handle to device * @@ -814,7 +810,7 @@ static int wdt_open(struct inode *inode, struct file *file) } /** - * wdt_close: + * wdt_release - release a watchdog. * @inode: inode to board * @file: file handle to board * @@ -827,7 +823,7 @@ static int wdt_release(struct inode *inode, struct file *file) } /** - * notify_sys: + * wdt_notify_sys - notify to watchdog. * @this: our notifier block * @code: the event being reported * @unused: unused -- cgit v1.2.3 From 742b0d7e15c333303daad4856de0764f4bc83601 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Wed, 26 May 2021 13:20:34 -0400 Subject: rtc: max77686: Do not enforce (incorrect) interrupt trigger type Interrupt line can be configured on different hardware in different way, even inverted. Therefore driver should not enforce specific trigger type - edge falling - but instead rely on Devicetree to configure it. The Maxim 77686 datasheet describes the interrupt line as active low with a requirement of acknowledge from the CPU therefore the edge falling is not correct. The interrupt line is shared between PMIC and RTC driver, so using level sensitive interrupt is here especially important to avoid races. With an edge configuration in case if first PMIC signals interrupt followed shortly after by the RTC, the interrupt might not be yet cleared/acked thus the second one would not be noticed. Signed-off-by: Krzysztof Kozlowski Signed-off-by: Alexandre Belloni Link: https://lore.kernel.org/r/20210526172036.183223-6-krzysztof.kozlowski@canonical.com --- drivers/rtc/rtc-max77686.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/rtc/rtc-max77686.c b/drivers/rtc/rtc-max77686.c index d51cc12114cb..eae7cb9faf1e 100644 --- a/drivers/rtc/rtc-max77686.c +++ b/drivers/rtc/rtc-max77686.c @@ -717,8 +717,8 @@ static int max77686_init_rtc_regmap(struct max77686_rtc_info *info) add_rtc_irq: ret = regmap_add_irq_chip(info->rtc_regmap, info->rtc_irq, - IRQF_TRIGGER_FALLING | IRQF_ONESHOT | - IRQF_SHARED, 0, info->drv_data->rtc_irq_chip, + IRQF_ONESHOT | IRQF_SHARED, + 0, info->drv_data->rtc_irq_chip, &info->rtc_irq_data); if (ret < 0) { dev_err(info->dev, "Failed to add RTC irq chip: %d\n", ret); -- cgit v1.2.3 From e5e3352580702b3727637dd988cddfe6a5880fe9 Mon Sep 17 00:00:00 2001 From: Matti Vaittinen Date: Thu, 27 May 2021 13:58:19 +0300 Subject: rtc: bd70528: Drop BD70528 support The only known BD70528 use-cases are such that the PMIC is controlled from separate MCU which is not running Linux. I am not aware of any Linux driver users. Furthermore, it seems there is no demand for this IC. Let's ease the maintenance burden and drop the driver. We can always add it back if there is sudden need for it. Signed-off-by: Matti Vaittinen Signed-off-by: Alexandre Belloni Link: https://lore.kernel.org/r/20210527105819.GA3111334@localhost.localdomain --- drivers/rtc/Kconfig | 7 +- drivers/rtc/rtc-bd70528.c | 316 ++-------------------------------------------- 2 files changed, 14 insertions(+), 309 deletions(-) diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig index 914497abeef9..12153d5801ce 100644 --- a/drivers/rtc/Kconfig +++ b/drivers/rtc/Kconfig @@ -501,12 +501,11 @@ config RTC_DRV_M41T80_WDT watchdog timer in the ST M41T60 and M41T80 RTC chips series. config RTC_DRV_BD70528 - tristate "ROHM BD70528, BD71815 and BD71828 PMIC RTC" - depends on MFD_ROHM_BD71828 || MFD_ROHM_BD70528 - depends on BD70528_WATCHDOG || !BD70528_WATCHDOG + tristate "ROHM BD71815 and BD71828 PMIC RTC" + depends on MFD_ROHM_BD71828 help If you say Y here you will get support for the RTC - block on ROHM BD70528, BD71815 and BD71828 Power Management IC. + block on ROHM BD71815 and BD71828 Power Management IC. This driver can also be built as a module. If so, the module will be called rtc-bd70528. diff --git a/drivers/rtc/rtc-bd70528.c b/drivers/rtc/rtc-bd70528.c index 6454afca02a6..59b627fc1ecf 100644 --- a/drivers/rtc/rtc-bd70528.c +++ b/drivers/rtc/rtc-bd70528.c @@ -2,10 +2,9 @@ // // Copyright (C) 2018 ROHM Semiconductors // -// RTC driver for ROHM BD70528 PMIC +// RTC driver for ROHM BD71828 and BD71815 PMIC #include -#include #include #include #include @@ -39,11 +38,6 @@ struct bd70528_rtc_data { u8 year; } __packed; -struct bd70528_rtc_wake { - struct bd70528_rtc_day time; - u8 ctrl; -} __packed; - struct bd71828_rtc_alm { struct bd70528_rtc_data alm0; struct bd70528_rtc_data alm1; @@ -51,141 +45,14 @@ struct bd71828_rtc_alm { u8 alm1_mask; } __packed; -struct bd70528_rtc_alm { - struct bd70528_rtc_data data; - u8 alm_mask; - u8 alm_repeat; -} __packed; - struct bd70528_rtc { struct rohm_regmap_dev *parent; struct regmap *regmap; struct device *dev; u8 reg_time_start; u8 bd718xx_alm_block_start; - bool has_rtc_timers; }; -static int bd70528_set_wake(struct rohm_regmap_dev *bd70528, - int enable, int *old_state) -{ - int ret; - unsigned int ctrl_reg; - - ret = regmap_read(bd70528->regmap, BD70528_REG_WAKE_EN, &ctrl_reg); - if (ret) - return ret; - - if (old_state) { - if (ctrl_reg & BD70528_MASK_WAKE_EN) - *old_state |= BD70528_WAKE_STATE_BIT; - else - *old_state &= ~BD70528_WAKE_STATE_BIT; - - if (!enable == !(*old_state & BD70528_WAKE_STATE_BIT)) - return 0; - } - - if (enable) - ctrl_reg |= BD70528_MASK_WAKE_EN; - else - ctrl_reg &= ~BD70528_MASK_WAKE_EN; - - return regmap_write(bd70528->regmap, BD70528_REG_WAKE_EN, - ctrl_reg); -} - -static int bd70528_set_elapsed_tmr(struct rohm_regmap_dev *bd70528, - int enable, int *old_state) -{ - int ret; - unsigned int ctrl_reg; - - /* - * TBD - * What is the purpose of elapsed timer ? - * Is the timeout registers counting down, or is the disable - re-enable - * going to restart the elapsed-time counting? If counting is restarted - * the timeout should be decreased by the amount of time that has - * elapsed since starting the timer. Maybe we should store the monotonic - * clock value when timer is started so that if RTC is set while timer - * is armed we could do the compensation. This is a hack if RTC/system - * clk are drifting. OTOH, RTC controlled via I2C is in any case - * inaccurate... - */ - ret = regmap_read(bd70528->regmap, BD70528_REG_ELAPSED_TIMER_EN, - &ctrl_reg); - if (ret) - return ret; - - if (old_state) { - if (ctrl_reg & BD70528_MASK_ELAPSED_TIMER_EN) - *old_state |= BD70528_ELAPSED_STATE_BIT; - else - *old_state &= ~BD70528_ELAPSED_STATE_BIT; - - if ((!enable) == (!(*old_state & BD70528_ELAPSED_STATE_BIT))) - return 0; - } - - if (enable) - ctrl_reg |= BD70528_MASK_ELAPSED_TIMER_EN; - else - ctrl_reg &= ~BD70528_MASK_ELAPSED_TIMER_EN; - - return regmap_write(bd70528->regmap, BD70528_REG_ELAPSED_TIMER_EN, - ctrl_reg); -} - -static int bd70528_set_rtc_based_timers(struct bd70528_rtc *r, int new_state, - int *old_state) -{ - int ret; - - ret = bd70528_wdt_set(r->parent, new_state & BD70528_WDT_STATE_BIT, - old_state); - if (ret) { - dev_err(r->dev, - "Failed to disable WDG for RTC setting (%d)\n", ret); - return ret; - } - ret = bd70528_set_elapsed_tmr(r->parent, - new_state & BD70528_ELAPSED_STATE_BIT, - old_state); - if (ret) { - dev_err(r->dev, - "Failed to disable 'elapsed timer' for RTC setting\n"); - return ret; - } - ret = bd70528_set_wake(r->parent, new_state & BD70528_WAKE_STATE_BIT, - old_state); - if (ret) { - dev_err(r->dev, - "Failed to disable 'wake timer' for RTC setting\n"); - return ret; - } - - return ret; -} - -static int bd70528_re_enable_rtc_based_timers(struct bd70528_rtc *r, - int old_state) -{ - if (!r->has_rtc_timers) - return 0; - - return bd70528_set_rtc_based_timers(r, old_state, NULL); -} - -static int bd70528_disable_rtc_based_timers(struct bd70528_rtc *r, - int *old_state) -{ - if (!r->has_rtc_timers) - return 0; - - return bd70528_set_rtc_based_timers(r, 0, old_state); -} - static inline void tmday2rtc(struct rtc_time *t, struct bd70528_rtc_day *d) { d->sec &= ~BD70528_MASK_RTC_SEC; @@ -267,52 +134,6 @@ static int bd71828_set_alarm(struct device *dev, struct rtc_wkalrm *a) } -static int bd70528_set_alarm(struct device *dev, struct rtc_wkalrm *a) -{ - struct bd70528_rtc_wake wake; - struct bd70528_rtc_alm alm; - int ret; - struct bd70528_rtc *r = dev_get_drvdata(dev); - - ret = regmap_bulk_read(r->regmap, BD70528_REG_RTC_WAKE_START, &wake, - sizeof(wake)); - if (ret) { - dev_err(dev, "Failed to read wake regs\n"); - return ret; - } - - ret = regmap_bulk_read(r->regmap, BD70528_REG_RTC_ALM_START, &alm, - sizeof(alm)); - if (ret) { - dev_err(dev, "Failed to read alarm regs\n"); - return ret; - } - - tm2rtc(&a->time, &alm.data); - tmday2rtc(&a->time, &wake.time); - - if (a->enabled) { - alm.alm_mask &= ~BD70528_MASK_ALM_EN; - wake.ctrl |= BD70528_MASK_WAKE_EN; - } else { - alm.alm_mask |= BD70528_MASK_ALM_EN; - wake.ctrl &= ~BD70528_MASK_WAKE_EN; - } - - ret = regmap_bulk_write(r->regmap, BD70528_REG_RTC_WAKE_START, &wake, - sizeof(wake)); - if (ret) { - dev_err(dev, "Failed to set wake time\n"); - return ret; - } - ret = regmap_bulk_write(r->regmap, BD70528_REG_RTC_ALM_START, &alm, - sizeof(alm)); - if (ret) - dev_err(dev, "Failed to set alarm time\n"); - - return ret; -} - static int bd71828_read_alarm(struct device *dev, struct rtc_wkalrm *a) { int ret; @@ -336,78 +157,28 @@ static int bd71828_read_alarm(struct device *dev, struct rtc_wkalrm *a) return 0; } -static int bd70528_read_alarm(struct device *dev, struct rtc_wkalrm *a) +static int bd71828_set_time(struct device *dev, struct rtc_time *t) { - struct bd70528_rtc_alm alm; int ret; - struct bd70528_rtc *r = dev_get_drvdata(dev); - - ret = regmap_bulk_read(r->regmap, BD70528_REG_RTC_ALM_START, &alm, - sizeof(alm)); - if (ret) { - dev_err(dev, "Failed to read alarm regs\n"); - return ret; - } - - rtc2tm(&alm.data, &a->time); - a->time.tm_mday = -1; - a->time.tm_mon = -1; - a->time.tm_year = -1; - a->enabled = !(alm.alm_mask & BD70528_MASK_ALM_EN); - a->pending = 0; - - return 0; -} - -static int bd70528_set_time_locked(struct device *dev, struct rtc_time *t) -{ - int ret, tmpret, old_states; struct bd70528_rtc_data rtc_data; struct bd70528_rtc *r = dev_get_drvdata(dev); - ret = bd70528_disable_rtc_based_timers(r, &old_states); - if (ret) - return ret; - - tmpret = regmap_bulk_read(r->regmap, r->reg_time_start, &rtc_data, - sizeof(rtc_data)); - if (tmpret) { + ret = regmap_bulk_read(r->regmap, r->reg_time_start, &rtc_data, + sizeof(rtc_data)); + if (ret) { dev_err(dev, "Failed to read RTC time registers\n"); - goto renable_out; + return ret; } tm2rtc(t, &rtc_data); - tmpret = regmap_bulk_write(r->regmap, r->reg_time_start, &rtc_data, - sizeof(rtc_data)); - if (tmpret) { + ret = regmap_bulk_write(r->regmap, r->reg_time_start, &rtc_data, + sizeof(rtc_data)); + if (ret) dev_err(dev, "Failed to set RTC time\n"); - goto renable_out; - } - -renable_out: - ret = bd70528_re_enable_rtc_based_timers(r, old_states); - if (tmpret) - ret = tmpret; return ret; } -static int bd71828_set_time(struct device *dev, struct rtc_time *t) -{ - return bd70528_set_time_locked(dev, t); -} - -static int bd70528_set_time(struct device *dev, struct rtc_time *t) -{ - int ret; - struct bd70528_rtc *r = dev_get_drvdata(dev); - - bd70528_wdt_lock(r->parent); - ret = bd70528_set_time_locked(dev, t); - bd70528_wdt_unlock(r->parent); - return ret; -} - static int bd70528_get_time(struct device *dev, struct rtc_time *t) { struct bd70528_rtc *r = dev_get_drvdata(dev); @@ -427,31 +198,6 @@ static int bd70528_get_time(struct device *dev, struct rtc_time *t) return 0; } -static int bd70528_alm_enable(struct device *dev, unsigned int enabled) -{ - int ret; - unsigned int enableval = BD70528_MASK_ALM_EN; - struct bd70528_rtc *r = dev_get_drvdata(dev); - - if (enabled) - enableval = 0; - - bd70528_wdt_lock(r->parent); - ret = bd70528_set_wake(r->parent, enabled, NULL); - if (ret) { - dev_err(dev, "Failed to change wake state\n"); - goto out_unlock; - } - ret = regmap_update_bits(r->regmap, BD70528_REG_RTC_ALM_MASK, - BD70528_MASK_ALM_EN, enableval); - if (ret) - dev_err(dev, "Failed to change alarm state\n"); - -out_unlock: - bd70528_wdt_unlock(r->parent); - return ret; -} - static int bd71828_alm_enable(struct device *dev, unsigned int enabled) { int ret; @@ -470,14 +216,6 @@ static int bd71828_alm_enable(struct device *dev, unsigned int enabled) return ret; } -static const struct rtc_class_ops bd70528_rtc_ops = { - .read_time = bd70528_get_time, - .set_time = bd70528_set_time, - .read_alarm = bd70528_read_alarm, - .set_alarm = bd70528_set_alarm, - .alarm_irq_enable = bd70528_alm_enable, -}; - static const struct rtc_class_ops bd71828_rtc_ops = { .read_time = bd70528_get_time, .set_time = bd71828_set_time, @@ -503,7 +241,6 @@ static int bd70528_probe(struct platform_device *pdev) struct rtc_device *rtc; int irq; unsigned int hr; - bool enable_main_irq = false; u8 hour_reg; enum rohm_chip_type chip = platform_get_device_id(pdev)->driver_data; @@ -518,21 +255,9 @@ static int bd70528_probe(struct platform_device *pdev) } bd_rtc->dev = &pdev->dev; + rtc_ops = &bd71828_rtc_ops; switch (chip) { - case ROHM_CHIP_TYPE_BD70528: - bd_rtc->parent = dev_get_drvdata(pdev->dev.parent); - if (!bd_rtc->parent) { - dev_err(&pdev->dev, "No MFD data\n"); - return -EINVAL; - } - irq_name = "bd70528-rtc-alm"; - bd_rtc->has_rtc_timers = true; - bd_rtc->reg_time_start = BD70528_REG_RTC_START; - hour_reg = BD70528_REG_RTC_HOUR; - enable_main_irq = true; - rtc_ops = &bd70528_rtc_ops; - break; case ROHM_CHIP_TYPE_BD71815: irq_name = "bd71815-rtc-alm-0"; bd_rtc->reg_time_start = BD71815_REG_RTC_START; @@ -549,14 +274,12 @@ static int bd70528_probe(struct platform_device *pdev) */ bd_rtc->bd718xx_alm_block_start = BD71815_REG_RTC_ALM_START; hour_reg = BD71815_REG_HOUR; - rtc_ops = &bd71828_rtc_ops; break; case ROHM_CHIP_TYPE_BD71828: irq_name = "bd71828-rtc-alm-0"; bd_rtc->reg_time_start = BD71828_REG_RTC_START; bd_rtc->bd718xx_alm_block_start = BD71828_REG_RTC_ALM_START; hour_reg = BD71828_REG_RTC_HOUR; - rtc_ops = &bd71828_rtc_ops; break; default: dev_err(&pdev->dev, "Unknown chip\n"); @@ -611,27 +334,10 @@ static int bd70528_probe(struct platform_device *pdev) if (ret) return ret; - /* - * BD70528 irq controller is not touching the main mask register. - * So enable the RTC block interrupts at main level. We can just - * leave them enabled as irq-controller should disable irqs - * from sub-registers when IRQ is disabled or freed. - */ - if (enable_main_irq) { - ret = regmap_update_bits(bd_rtc->regmap, - BD70528_REG_INT_MAIN_MASK, - BD70528_INT_RTC_MASK, 0); - if (ret) { - dev_err(&pdev->dev, "Failed to enable RTC interrupts\n"); - return ret; - } - } - return devm_rtc_register_device(rtc); } static const struct platform_device_id bd718x7_rtc_id[] = { - { "bd70528-rtc", ROHM_CHIP_TYPE_BD70528 }, { "bd71828-rtc", ROHM_CHIP_TYPE_BD71828 }, { "bd71815-rtc", ROHM_CHIP_TYPE_BD71815 }, { }, @@ -649,6 +355,6 @@ static struct platform_driver bd70528_rtc = { module_platform_driver(bd70528_rtc); MODULE_AUTHOR("Matti Vaittinen "); -MODULE_DESCRIPTION("ROHM BD70528 and BD71828 PMIC RTC driver"); +MODULE_DESCRIPTION("ROHM BD71828 and BD71815 PMIC RTC driver"); MODULE_LICENSE("GPL"); MODULE_ALIAS("platform:bd70528-rtc"); -- cgit v1.2.3 From 950ac33dbe6ff656a623d862022f0762ec061ba7 Mon Sep 17 00:00:00 2001 From: Martin Fuzzey Date: Mon, 7 Jun 2021 19:36:40 +0200 Subject: rtc: stm32: Fix unbalanced clk_disable_unprepare() on probe error path The STM32MP1 RTC may have 2 clocks, the pclk and the rtc_ck. If clk_prepare_enable() fails for the second clock (rtc_ck) we must only call clk_disable_unprepare() for the first clock (pclk) but currently we call it on both leading to a WARN: [ 15.629568] WARNING: CPU: 0 PID: 146 at drivers/clk/clk.c:958 clk_core_disable+0xb0/0xc8 [ 15.637620] ck_rtc already disabled [ 15.663322] CPU: 0 PID: 146 Comm: systemd-udevd Not tainted 5.4.77-pknbsp-svn5759-atag-v5.4.77-204-gea4235203137-dirty #2413 [ 15.674510] Hardware name: STM32 (Device Tree Support) [ 15.679658] [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [ 15.687371] [] (show_stack) from [] (dump_stack+0xc0/0xe0) [ 15.694574] [] (dump_stack) from [] (__warn+0xc8/0xf0) [ 15.701428] [] (__warn) from [] (warn_slowpath_fmt+0x60/0x94) [ 15.708894] [] (warn_slowpath_fmt) from [] (clk_core_disable+0xb0/0xc8) [ 15.717230] [] (clk_core_disable) from [] (clk_core_disable_lock+0x18/0x24) [ 15.725924] [] (clk_core_disable_lock) from [] (stm32_rtc_probe+0x124/0x5e4 [rtc_stm32]) [ 15.735739] [] (stm32_rtc_probe [rtc_stm32]) from [] (platform_drv_probe+0x48/0x98) [ 15.745095] [] (platform_drv_probe) from [] (really_probe+0x1f0/0x458) [ 15.753338] [] (really_probe) from [] (driver_probe_device+0x70/0x1c4) [ 15.761584] [] (driver_probe_device) from [] (device_driver_attach+0x58/0x60) [ 15.770439] [] (device_driver_attach) from [] (__driver_attach+0xcc/0x170) [ 15.779032] [] (__driver_attach) from [] (bus_for_each_dev+0x58/0x7c) [ 15.787191] [] (bus_for_each_dev) from [] (bus_add_driver+0xdc/0x1f8) [ 15.795352] [] (bus_add_driver) from [] (driver_register+0x7c/0x110) [ 15.803425] [] (driver_register) from [] (do_one_initcall+0x70/0x1b8) [ 15.811588] [] (do_one_initcall) from [] (do_init_module+0x58/0x1f8) [ 15.819660] [] (do_init_module) from [] (load_module+0x1e58/0x23c8) [ 15.827646] [] (load_module) from [] (sys_finit_module+0xa0/0xd4) [ 15.835459] [] (sys_finit_module) from [] (__sys_trace_return+0x0/0x20) Signed-off-by: Martin Fuzzey Fixes: 4e64350f42e2 ("rtc: add STM32 RTC driver") Cc: stable@vger.kernel.org Reviewed-by: Nobuhiro Iwamatsu Signed-off-by: Alexandre Belloni Link: https://lore.kernel.org/r/1623087421-19722-1-git-send-email-martin.fuzzey@flowbird.group --- drivers/rtc/rtc-stm32.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/rtc/rtc-stm32.c b/drivers/rtc/rtc-stm32.c index 75a8924ba12b..ac9e228b56d0 100644 --- a/drivers/rtc/rtc-stm32.c +++ b/drivers/rtc/rtc-stm32.c @@ -754,7 +754,7 @@ static int stm32_rtc_probe(struct platform_device *pdev) ret = clk_prepare_enable(rtc->rtc_ck); if (ret) - goto err; + goto err_no_rtc_ck; if (rtc->data->need_dbp) regmap_update_bits(rtc->dbp, rtc->dbp_reg, @@ -830,10 +830,12 @@ static int stm32_rtc_probe(struct platform_device *pdev) } return 0; + err: + clk_disable_unprepare(rtc->rtc_ck); +err_no_rtc_ck: if (rtc->data->has_pclk) clk_disable_unprepare(rtc->pclk); - clk_disable_unprepare(rtc->rtc_ck); if (rtc->data->need_dbp) regmap_update_bits(rtc->dbp, rtc->dbp_reg, rtc->dbp_mask, 0); -- cgit v1.2.3 From fc3c335226a92f69aa01061e66b60ace88475dd3 Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Wed, 9 Jun 2021 13:00:50 +0100 Subject: rtc: v3020: remove redundant initialization of variable retval The variable retval is being initialized with a value that is never read, it is being updated later on. The assignment is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King Signed-off-by: Alexandre Belloni Link: https://lore.kernel.org/r/20210609120050.185746-1-colin.king@canonical.com --- drivers/rtc/rtc-v3020.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/rtc/rtc-v3020.c b/drivers/rtc/rtc-v3020.c index d2da92187d56..4e8341c49f51 100644 --- a/drivers/rtc/rtc-v3020.c +++ b/drivers/rtc/rtc-v3020.c @@ -282,7 +282,7 @@ static int rtc_probe(struct platform_device *pdev) { struct v3020_platform_data *pdata = dev_get_platdata(&pdev->dev); struct v3020 *chip; - int retval = -EBUSY; + int retval; int i; chip = devm_kzalloc(&pdev->dev, sizeof(*chip), GFP_KERNEL); -- cgit v1.2.3 From 7e124917809705f05e0c9f0f72a38102e6aa4eff Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Thu, 10 Jun 2021 17:00:44 +0200 Subject: dt-bindings: rtc: rx8900: Convert to YAML schema Convert the Epson RX8900 DT bindings to YAML schema. Signed-off-by: Marek Vasut Cc: Alexandre Belloni Cc: Rob Herring Cc: kernel@dh-electronics.com Cc: linux-rtc@vger.kernel.org To: devicetree@vger.kernel.org Reviewed-by: Rob Herring Signed-off-by: Alexandre Belloni Link: https://lore.kernel.org/r/20210610150044.29792-1-marex@denx.de --- .../devicetree/bindings/rtc/epson,rx8900.txt | 22 ---------- .../devicetree/bindings/rtc/epson,rx8900.yaml | 49 ++++++++++++++++++++++ 2 files changed, 49 insertions(+), 22 deletions(-) delete mode 100644 Documentation/devicetree/bindings/rtc/epson,rx8900.txt create mode 100644 Documentation/devicetree/bindings/rtc/epson,rx8900.yaml diff --git a/Documentation/devicetree/bindings/rtc/epson,rx8900.txt b/Documentation/devicetree/bindings/rtc/epson,rx8900.txt deleted file mode 100644 index 3f61e516ecf6..000000000000 --- a/Documentation/devicetree/bindings/rtc/epson,rx8900.txt +++ /dev/null @@ -1,22 +0,0 @@ -Real Time Clock driver for: - - Epson RX8900 - - Micro Crystal rv8803 - -Required properties: -- compatible: should be: "microcrystal,rv8803" or "epson,rx8900" -- reg : the I2C address of the device for I2C - -Optional properties: -- epson,vdet-disable : boolean, if present will disable voltage detector. - Should be set if no backup battery is used. -- trickle-diode-disable : boolean, if present will disable internal trickle - charger diode - -Example: - - rtc: rtc@32 { - compatible = "epson,rx8900" - reg = <0x32>; - epson,vdet-disable; - trickle-diode-disable; - }; diff --git a/Documentation/devicetree/bindings/rtc/epson,rx8900.yaml b/Documentation/devicetree/bindings/rtc/epson,rx8900.yaml new file mode 100644 index 000000000000..29fe39bb08ad --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/epson,rx8900.yaml @@ -0,0 +1,49 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/rtc/epson,rx8900.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: EPSON RX8900 / Microcrystal RV8803 Real-Time Clock DT bindings + +maintainers: + - Marek Vasut + +allOf: + - $ref: rtc.yaml# + +properties: + compatible: + enum: + - epson,rx8900 + - microcrystal,rv8803 + + reg: + maxItems: 1 + + epson,vdet-disable: + type: boolean + description: | + Disable voltage detector. Should be set if no backup battery is used. + + trickle-diode-disable: true + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + rtc@32 { + compatible = "epson,rx8900"; + reg = <0x32>; + epson,vdet-disable; + trickle-diode-disable; + }; + }; -- cgit v1.2.3 From 4a7e7408688de048bffa5e0e00d246b5f854bcf7 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 16 Jun 2021 15:51:43 +0200 Subject: dt-bindings: rtc: ti,bq32k: Convert to json-schema Convert the TI BQ32000 I2C Serial Real-Time Clock Device Tree binding documentation to json-schema. Document missing properties. Signed-off-by: Geert Uytterhoeven Reviewed-by: Rob Herring Signed-off-by: Alexandre Belloni Link: https://lore.kernel.org/r/42d9c71b4ee1f120e0cdcf6b266547d29d1fb9a4.1623851377.git.geert+renesas@glider.be --- .../devicetree/bindings/rtc/ti,bq32000.yaml | 49 ++++++++++++++++++++++ Documentation/devicetree/bindings/rtc/ti,bq32k.txt | 18 -------- 2 files changed, 49 insertions(+), 18 deletions(-) create mode 100644 Documentation/devicetree/bindings/rtc/ti,bq32000.yaml delete mode 100644 Documentation/devicetree/bindings/rtc/ti,bq32k.txt diff --git a/Documentation/devicetree/bindings/rtc/ti,bq32000.yaml b/Documentation/devicetree/bindings/rtc/ti,bq32000.yaml new file mode 100644 index 000000000000..392bd71bd1be --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/ti,bq32000.yaml @@ -0,0 +1,49 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/rtc/ti,bq32000.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI BQ32000 I2C Serial Real-Time Clock + +maintainers: + - Pavel Machek + +allOf: + - $ref: rtc.yaml# + +properties: + compatible: + const: ti,bq32000 + + reg: + const: 0x68 + + interrupts: + maxItems: 1 + + start-year: true + + trickle-resistor-ohms: + enum: [ 1120, 20180 ] + + trickle-diode-disable: true + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + bq32000: rtc@68 { + compatible = "ti,bq32000"; + reg = <0x68>; + trickle-resistor-ohms = <1120>; + }; + }; diff --git a/Documentation/devicetree/bindings/rtc/ti,bq32k.txt b/Documentation/devicetree/bindings/rtc/ti,bq32k.txt deleted file mode 100644 index e204906b9ad3..000000000000 --- a/Documentation/devicetree/bindings/rtc/ti,bq32k.txt +++ /dev/null @@ -1,18 +0,0 @@ -* TI BQ32000 I2C Serial Real-Time Clock - -Required properties: -- compatible: Should contain "ti,bq32000". -- reg: I2C address for chip - -Optional properties: -- trickle-resistor-ohms : Selected resistor for trickle charger - Values usable are 1120 and 20180 - Should be given if trickle charger should be enabled -- trickle-diode-disable : Do not use internal trickle charger diode - Should be given if internal trickle charger diode should be disabled -Example: - bq32000: rtc@68 { - compatible = "ti,bq32000"; - trickle-resistor-ohms = <1120>; - reg = <0x68>; - }; -- cgit v1.2.3 From 836e9ea3ccc263d17fdeb90f28089ff1d945500d Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Thu, 3 Jun 2021 11:34:45 -0300 Subject: rtc: pcf2127: Fix the datasheet URL The current datasheet URL is no longer valid. Replace with a valid one. Signed-off-by: Fabio Estevam Signed-off-by: Alexandre Belloni Link: https://lore.kernel.org/r/20210603143447.2223353-1-festevam@gmail.com --- drivers/rtc/rtc-pcf2127.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/rtc/rtc-pcf2127.c b/drivers/rtc/rtc-pcf2127.c index d13c20a2adf7..48ce1e85deb1 100644 --- a/drivers/rtc/rtc-pcf2127.c +++ b/drivers/rtc/rtc-pcf2127.c @@ -10,7 +10,7 @@ * * based on the other drivers in this same directory. * - * Datasheet: http://cache.nxp.com/documents/data_sheet/PCF2127.pdf + * Datasheet: https://www.nxp.com/docs/en/data-sheet/PCF2127.pdf */ #include -- cgit v1.2.3 From 663bff1753a88195328fa7dc97cb96c9916343ed Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Thu, 3 Jun 2021 11:34:46 -0300 Subject: rtc: pcf85063: Fix the datasheet URL The current datasheet URL is no longer valid. Replace with a valid one. Signed-off-by: Fabio Estevam Signed-off-by: Alexandre Belloni Link: https://lore.kernel.org/r/20210603143447.2223353-2-festevam@gmail.com --- drivers/rtc/rtc-pcf85063.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/rtc/rtc-pcf85063.c b/drivers/rtc/rtc-pcf85063.c index 82becae14229..9a5297098d39 100644 --- a/drivers/rtc/rtc-pcf85063.c +++ b/drivers/rtc/rtc-pcf85063.c @@ -21,8 +21,8 @@ /* * Information for this driver was pulled from the following datasheets. * - * https://www.nxp.com/documents/data_sheet/PCF85063A.pdf - * https://www.nxp.com/documents/data_sheet/PCF85063TP.pdf + * https://www.nxp.com/docs/en/data-sheet/PCF85063A.pdf + * https://www.nxp.com/docs/en/data-sheet/PCF85063TP.pdf * * PCF85063A -- Rev. 6 — 18 November 2015 * PCF85063TP -- Rev. 4 — 6 May 2015 -- cgit v1.2.3 From 94af1e732abe6e83fb146fc89d6f520e6a939c6a Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Thu, 3 Jun 2021 11:34:47 -0300 Subject: rtc: pcf8563: Fix the datasheet URL The current datasheet URL is no longer valid. Replace with a valid one. Signed-off-by: Fabio Estevam Signed-off-by: Alexandre Belloni Link: https://lore.kernel.org/r/20210603143447.2223353-3-festevam@gmail.com --- drivers/rtc/rtc-pcf8563.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/rtc/rtc-pcf8563.c b/drivers/rtc/rtc-pcf8563.c index 18f12f36eb2b..c8bddfb94129 100644 --- a/drivers/rtc/rtc-pcf8563.c +++ b/drivers/rtc/rtc-pcf8563.c @@ -8,7 +8,7 @@ * * based on the other drivers in this same directory. * - * http://www.semiconductors.philips.com/acrobat/datasheets/PCF8563-04.pdf + * https://www.nxp.com/docs/en/data-sheet/PCF8563.pdf */ #include -- cgit v1.2.3 From 08eeafbba566ad0413b2e118e72658bee0550efb Mon Sep 17 00:00:00 2001 From: Alexandre Belloni Date: Mon, 21 Jun 2021 00:40:29 +0200 Subject: dt-bindings: rtc: ti,bq32k: take maintainership Take maintainership of the binding as PAvel said he doesn't have the hardware anymore. Signed-off-by: Alexandre Belloni Acked-by: Pavel Machek Link: https://lore.kernel.org/r/20210620224030.1115356-1-alexandre.belloni@bootlin.com --- Documentation/devicetree/bindings/rtc/ti,bq32000.yaml | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/rtc/ti,bq32000.yaml b/Documentation/devicetree/bindings/rtc/ti,bq32000.yaml index 392bd71bd1be..bf9c1c4ddb7e 100644 --- a/Documentation/devicetree/bindings/rtc/ti,bq32000.yaml +++ b/Documentation/devicetree/bindings/rtc/ti,bq32000.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: TI BQ32000 I2C Serial Real-Time Clock maintainers: - - Pavel Machek + - Alexandre Belloni allOf: - $ref: rtc.yaml# -- cgit v1.2.3 From 98c25b8012461f569a4d20bc4a48c489099cf7fd Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Thu, 24 Jun 2021 09:09:53 -0300 Subject: rtc: pcf85063: Update the PCF85063A datasheet revision After updating the datasheet URL, the PCF85063A datasheet revision has changed. Adjust it accordingly. Reported-by: Nobuhiro Iwamatsu Signed-off-by: Fabio Estevam Signed-off-by: Alexandre Belloni Link: https://lore.kernel.org/r/20210624120953.2313378-1-festevam@gmail.com --- drivers/rtc/rtc-pcf85063.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/rtc/rtc-pcf85063.c b/drivers/rtc/rtc-pcf85063.c index 9a5297098d39..14da4ab30104 100644 --- a/drivers/rtc/rtc-pcf85063.c +++ b/drivers/rtc/rtc-pcf85063.c @@ -24,7 +24,7 @@ * https://www.nxp.com/docs/en/data-sheet/PCF85063A.pdf * https://www.nxp.com/docs/en/data-sheet/PCF85063TP.pdf * - * PCF85063A -- Rev. 6 — 18 November 2015 + * PCF85063A -- Rev. 7 — 30 March 2018 * PCF85063TP -- Rev. 4 — 6 May 2015 * * https://www.microcrystal.com/fileadmin/Media/Products/RTC/App.Manual/RV-8263-C7_App-Manual.pdf -- cgit v1.2.3 From 299e726f77f924b1233873cd2a1974a654119539 Mon Sep 17 00:00:00 2001 From: Nobuhiro Iwamatsu Date: Wed, 7 Jul 2021 16:57:55 +0900 Subject: rtc: au1xxx: convert to SPDX identifier Use SPDX-License-Identifier instead of a verbose license text. Signed-off-by: Nobuhiro Iwamatsu Signed-off-by: Alexandre Belloni Link: https://lore.kernel.org/r/20210707075804.337458-2-nobuhiro1.iwamatsu@toshiba.co.jp --- drivers/rtc/rtc-au1xxx.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/drivers/rtc/rtc-au1xxx.c b/drivers/rtc/rtc-au1xxx.c index e6428b27b5d4..630ea5de6871 100644 --- a/drivers/rtc/rtc-au1xxx.c +++ b/drivers/rtc/rtc-au1xxx.c @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Au1xxx counter0 (aka Time-Of-Year counter) RTC interface driver. * * Copyright (C) 2008 Manuel Lauss - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. */ /* All current Au1xxx SoCs have 2 counters fed by an external 32.768 kHz -- cgit v1.2.3 From 67561a8e1ed184b2f7c029bb160f2b6239255e29 Mon Sep 17 00:00:00 2001 From: Nobuhiro Iwamatsu Date: Wed, 7 Jul 2021 16:57:56 +0900 Subject: rtc: ds1374: convert to SPDX identifier Use SPDX-License-Identifier instead of a verbose license text. Signed-off-by: Nobuhiro Iwamatsu Signed-off-by: Alexandre Belloni Link: https://lore.kernel.org/r/20210707075804.337458-3-nobuhiro1.iwamatsu@toshiba.co.jp --- drivers/rtc/rtc-ds1374.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) diff --git a/drivers/rtc/rtc-ds1374.c b/drivers/rtc/rtc-ds1374.c index fab79921a712..8db5a631bca8 100644 --- a/drivers/rtc/rtc-ds1374.c +++ b/drivers/rtc/rtc-ds1374.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * RTC client/driver for the Maxim/Dallas DS1374 Real-Time Clock over I2C * @@ -6,11 +7,7 @@ * * Copyright (C) 2014 Rose Technology * Copyright (C) 2006-2007 Freescale Semiconductor - * - * 2005 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. + * Copyright (c) 2005 MontaVista Software, Inc. */ /* * It would be more efficient to use i2c msgs/i2c_transfer directly but, as -- cgit v1.2.3 From cd13635e1c7d17b0e105531d2bbdd1a537ce00da Mon Sep 17 00:00:00 2001 From: Nobuhiro Iwamatsu Date: Wed, 7 Jul 2021 16:57:57 +0900 Subject: rtc: max6900: convert to SPDX identifier Use SPDX-License-Identifier instead of a verbose license text. Signed-off-by: Nobuhiro Iwamatsu Signed-off-by: Alexandre Belloni Link: https://lore.kernel.org/r/20210707075804.337458-4-nobuhiro1.iwamatsu@toshiba.co.jp --- drivers/rtc/rtc-max6900.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) diff --git a/drivers/rtc/rtc-max6900.c b/drivers/rtc/rtc-max6900.c index ab60f13fa3ef..4beadfa41644 100644 --- a/drivers/rtc/rtc-max6900.c +++ b/drivers/rtc/rtc-max6900.c @@ -1,14 +1,12 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * rtc class driver for the Maxim MAX6900 chip * + * Copyright (c) 2007 MontaVista, Software, Inc. + * * Author: Dale Farnsworth * * based on previously existing rtc class drivers - * - * 2007 (c) MontaVista, Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. */ #include -- cgit v1.2.3 From 1d9539ed2da86296de04173c413378459cf6eb32 Mon Sep 17 00:00:00 2001 From: Nobuhiro Iwamatsu Date: Wed, 7 Jul 2021 16:57:58 +0900 Subject: rtc: palmas: convert to SPDX identifier Use SPDX-License-Identifier instead of a verbose license text. Signed-off-by: Nobuhiro Iwamatsu Signed-off-by: Alexandre Belloni Link: https://lore.kernel.org/r/20210707075804.337458-5-nobuhiro1.iwamatsu@toshiba.co.jp --- drivers/rtc/rtc-palmas.c | 15 +-------------- 1 file changed, 1 insertion(+), 14 deletions(-) diff --git a/drivers/rtc/rtc-palmas.c b/drivers/rtc/rtc-palmas.c index 4bcfb88674d3..67571f7f0bbc 100644 --- a/drivers/rtc/rtc-palmas.c +++ b/drivers/rtc/rtc-palmas.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * rtc-palmas.c -- Palmas Real Time Clock driver. @@ -7,20 +8,6 @@ * Copyright (c) 2012, NVIDIA Corporation. * * Author: Laxman Dewangan - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation version 2. - * - * This program is distributed "as is" WITHOUT ANY WARRANTY of any kind, - * whether express or implied; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA - * 02111-1307, USA */ #include -- cgit v1.2.3 From 078699417a3983873fcc883312069b20f5923cbe Mon Sep 17 00:00:00 2001 From: Nobuhiro Iwamatsu Date: Wed, 7 Jul 2021 16:57:59 +0900 Subject: rtc: sc27xx: Fix format of SPDX identifier For C files, use the C99 format (//). Cc: Orson Zhai Cc: Baolin Wang Cc: Chunyan Zhang Signed-off-by: Nobuhiro Iwamatsu Signed-off-by: Alexandre Belloni Link: https://lore.kernel.org/r/20210707075804.337458-6-nobuhiro1.iwamatsu@toshiba.co.jp --- drivers/rtc/rtc-sc27xx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/rtc/rtc-sc27xx.c b/drivers/rtc/rtc-sc27xx.c index 187aa955b79c..ce7a2ddbbc16 100644 --- a/drivers/rtc/rtc-sc27xx.c +++ b/drivers/rtc/rtc-sc27xx.c @@ -1,7 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Copyright (C) 2017 Spreadtrum Communications Inc. * - * SPDX-License-Identifier: GPL-2.0 */ #include -- cgit v1.2.3 From 41a2ed5c710774f3ac3c7cae4e2aa5f8e09ba4b4 Mon Sep 17 00:00:00 2001 From: Nobuhiro Iwamatsu Date: Wed, 7 Jul 2021 16:58:00 +0900 Subject: rtc: rtd119x: Fix format of SPDX identifier For C files, use the C99 format (//). Signed-off-by: Nobuhiro Iwamatsu Signed-off-by: Alexandre Belloni Link: https://lore.kernel.org/r/20210707075804.337458-7-nobuhiro1.iwamatsu@toshiba.co.jp --- drivers/rtc/rtc-rtd119x.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/rtc/rtc-rtd119x.c b/drivers/rtc/rtc-rtd119x.c index bb98f2d574a5..8f9abd65846c 100644 --- a/drivers/rtc/rtc-rtd119x.c +++ b/drivers/rtc/rtc-rtd119x.c @@ -1,9 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0+ /* * Realtek RTD129x RTC * * Copyright (c) 2017 Andreas Färber - * - * SPDX-License-Identifier: GPL-2.0+ */ #include -- cgit v1.2.3 From 3f019164816fb7da6dd8b369e9bf584b97ba9654 Mon Sep 17 00:00:00 2001 From: Nobuhiro Iwamatsu Date: Wed, 7 Jul 2021 16:58:01 +0900 Subject: rtc: tps80031: convert to SPDX identifier Use SPDX-License-Identifier instead of a verbose license text. Signed-off-by: Nobuhiro Iwamatsu Signed-off-by: Alexandre Belloni Link: https://lore.kernel.org/r/20210707075804.337458-8-nobuhiro1.iwamatsu@toshiba.co.jp --- drivers/rtc/rtc-tps80031.c | 15 +-------------- 1 file changed, 1 insertion(+), 14 deletions(-) diff --git a/drivers/rtc/rtc-tps80031.c b/drivers/rtc/rtc-tps80031.c index 737f26eb284a..c77b8eab94a0 100644 --- a/drivers/rtc/rtc-tps80031.c +++ b/drivers/rtc/rtc-tps80031.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * rtc-tps80031.c -- TI TPS80031/TPS80032 RTC driver * @@ -7,20 +8,6 @@ * Copyright (c) 2012, NVIDIA Corporation. * * Author: Laxman Dewangan - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation version 2. - * - * This program is distributed "as is" WITHOUT ANY WARRANTY of any kind, - * whether express or implied; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA - * 02111-1307, USA */ #include -- cgit v1.2.3 From 9d0c49fa115c9c9e16853d6c05f4fdf1420f790b Mon Sep 17 00:00:00 2001 From: Nobuhiro Iwamatsu Date: Wed, 7 Jul 2021 16:58:02 +0900 Subject: rtc: tps6586x: convert to SPDX identifier Use SPDX-License-Identifier instead of a verbose license text. Signed-off-by: Nobuhiro Iwamatsu Signed-off-by: Alexandre Belloni Link: https://lore.kernel.org/r/20210707075804.337458-9-nobuhiro1.iwamatsu@toshiba.co.jp --- drivers/rtc/rtc-tps6586x.c | 15 +-------------- 1 file changed, 1 insertion(+), 14 deletions(-) diff --git a/drivers/rtc/rtc-tps6586x.c b/drivers/rtc/rtc-tps6586x.c index a980337c3065..52093e7ba22d 100644 --- a/drivers/rtc/rtc-tps6586x.c +++ b/drivers/rtc/rtc-tps6586x.c @@ -1,23 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * rtc-tps6586x.c: RTC driver for TI PMIC TPS6586X * * Copyright (c) 2012, NVIDIA Corporation. * * Author: Laxman Dewangan - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation version 2. - * - * This program is distributed "as is" WITHOUT ANY WARRANTY of any kind, - * whether express or implied; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA - * 02111-1307, USA */ #include -- cgit v1.2.3 From 9734a1ae34ecedf8aeaa842c9b3541cf8421c546 Mon Sep 17 00:00:00 2001 From: Nobuhiro Iwamatsu Date: Wed, 7 Jul 2021 16:58:04 +0900 Subject: rtc: spear: convert to SPDX identifier Use SPDX-License-Identifier instead of a verbose license text. Signed-off-by: Nobuhiro Iwamatsu Signed-off-by: Alexandre Belloni Link: https://lore.kernel.org/r/20210707075804.337458-11-nobuhiro1.iwamatsu@toshiba.co.jp --- drivers/rtc/rtc-spear.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/drivers/rtc/rtc-spear.c b/drivers/rtc/rtc-spear.c index ee721e53c155..b4a520056b1a 100644 --- a/drivers/rtc/rtc-spear.c +++ b/drivers/rtc/rtc-spear.c @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * drivers/rtc/rtc-spear.c * * Copyright (C) 2010 ST Microelectronics * Rajeev Kumar - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. */ #include -- cgit v1.2.3 From f2581b1dfa9858e342afa8034b0f64f923bbf233 Mon Sep 17 00:00:00 2001 From: Nobuhiro Iwamatsu Date: Thu, 8 Jul 2021 14:13:04 +0900 Subject: rtc: s5m: Check return value of s5m_check_peding_alarm_interrupt() s5m_check_peding_alarm_interrupt() in s5m_rtc_read_alarm() gets the return value, but doesn't use it. This modifies using the s5m_check_peding_alarm_interrupt()"s return value as the s5m_rtc_read_alarm()'s return value. Cc: Krzysztof Kozlowski Cc: Bartlomiej Zolnierkiewicz Cc: linux-samsung-soc@vger.kernel.org Signed-off-by: Nobuhiro Iwamatsu Reviewed-by: Krzysztof Kozlowski Signed-off-by: Alexandre Belloni Link: https://lore.kernel.org/r/20210708051304.341278-1-nobuhiro1.iwamatsu@toshiba.co.jp --- drivers/rtc/rtc-s5m.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/rtc/rtc-s5m.c b/drivers/rtc/rtc-s5m.c index 038269a6b08c..6b56f8eacba6 100644 --- a/drivers/rtc/rtc-s5m.c +++ b/drivers/rtc/rtc-s5m.c @@ -488,9 +488,7 @@ static int s5m_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm) dev_dbg(dev, "%s: %ptR(%d)\n", __func__, &alrm->time, alrm->time.tm_wday); - ret = s5m_check_peding_alarm_interrupt(info, alrm); - - return 0; + return s5m_check_peding_alarm_interrupt(info, alrm); } static int s5m_rtc_stop_alarm(struct s5m_rtc_info *info) -- cgit v1.2.3 From 37aadf9b2a7ea64a358ea7532d7f477fe6837ef1 Mon Sep 17 00:00:00 2001 From: Nobuhiro Iwamatsu Date: Thu, 8 Jul 2021 14:13:40 +0900 Subject: rtc: at91sam9: Remove unnecessary offset variable checks The offset variable is checked by at91_rtc_readalarm(), but this check is unnecessary because the previous check knew that the value of this variable was not 0. This removes that unnecessary offset variable checks. Cc: Nicolas Ferre Cc: Ludovic Desroches Signed-off-by: Nobuhiro Iwamatsu Acked-by: Nicolas Ferre Signed-off-by: Alexandre Belloni Link: https://lore.kernel.org/r/20210708051340.341345-1-nobuhiro1.iwamatsu@toshiba.co.jp --- drivers/rtc/rtc-at91sam9.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/rtc/rtc-at91sam9.c b/drivers/rtc/rtc-at91sam9.c index 2216be429ab7..b7b5ea1a4e67 100644 --- a/drivers/rtc/rtc-at91sam9.c +++ b/drivers/rtc/rtc-at91sam9.c @@ -184,7 +184,7 @@ static int at91_rtc_readalarm(struct device *dev, struct rtc_wkalrm *alrm) return -EILSEQ; memset(alrm, 0, sizeof(*alrm)); - if (alarm != ALARM_DISABLED && offset != 0) { + if (alarm != ALARM_DISABLED) { rtc_time64_to_tm(offset + alarm, tm); dev_dbg(dev, "%s: %ptR\n", __func__, tm); -- cgit v1.2.3 From 2f8619846755176a6720c71d580ffd09394a74bc Mon Sep 17 00:00:00 2001 From: Mian Yousaf Kaukab Date: Tue, 29 Jun 2021 17:06:43 +0200 Subject: rtc: pcf2127: handle timestamp interrupts MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit commit 03623b4b041c ("rtc: pcf2127: add tamper detection support") added support for timestamp interrupts. However they are not being handled in the irq handler. If a timestamp interrupt occurs it results in kernel disabling the interrupt and displaying the call trace: [ 121.145580] irq 78: nobody cared (try booting with the "irqpoll" option) ... [ 121.238087] [<00000000c4d69393>] irq_default_primary_handler threaded [<000000000a90d25b>] pcf2127_rtc_irq [rtc_pcf2127] [ 121.248971] Disabling IRQ #78 Handle timestamp interrupts in pcf2127_rtc_irq(). Save time stamp before clearing TSF1 and TSF2 flags so that it can't be overwritten. Set a flag to mark if the timestamp is valid and only report to sysfs if the flag is set. To mimic the hardware behavior, don’t save another timestamp until the first one has been read by the userspace. However, if the alarm irq is not configured, keep the old way of handling timestamp interrupt in the timestamp0 sysfs calls. Signed-off-by: Mian Yousaf Kaukab Reviewed-by: Bruno Thomsen Tested-by: Bruno Thomsen Signed-off-by: Alexandre Belloni Link: https://lore.kernel.org/r/20210629150643.31551-1-ykaukab@suse.de --- drivers/rtc/rtc-pcf2127.c | 192 ++++++++++++++++++++++++++++++++-------------- 1 file changed, 133 insertions(+), 59 deletions(-) diff --git a/drivers/rtc/rtc-pcf2127.c b/drivers/rtc/rtc-pcf2127.c index 48ce1e85deb1..56c58b055dff 100644 --- a/drivers/rtc/rtc-pcf2127.c +++ b/drivers/rtc/rtc-pcf2127.c @@ -94,10 +94,20 @@ #define PCF2127_WD_VAL_MAX 255 #define PCF2127_WD_VAL_DEFAULT 60 +/* Mask for currently enabled interrupts */ +#define PCF2127_CTRL1_IRQ_MASK (PCF2127_BIT_CTRL1_TSF1) +#define PCF2127_CTRL2_IRQ_MASK ( \ + PCF2127_BIT_CTRL2_AF | \ + PCF2127_BIT_CTRL2_WDTF | \ + PCF2127_BIT_CTRL2_TSF2) + struct pcf2127 { struct rtc_device *rtc; struct watchdog_device wdd; struct regmap *regmap; + time64_t ts; + bool ts_valid; + bool irq_enabled; }; /* @@ -434,23 +444,96 @@ static int pcf2127_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm) return pcf2127_rtc_alarm_irq_enable(dev, alrm->enabled); } +/* + * This function reads ctrl2 register, caller is responsible for calling + * pcf2127_wdt_active_ping() + */ +static int pcf2127_rtc_ts_read(struct device *dev, time64_t *ts) +{ + struct pcf2127 *pcf2127 = dev_get_drvdata(dev); + struct rtc_time tm; + int ret; + unsigned char data[25]; + + ret = regmap_bulk_read(pcf2127->regmap, PCF2127_REG_CTRL1, data, + sizeof(data)); + if (ret) { + dev_err(dev, "%s: read error ret=%d\n", __func__, ret); + return ret; + } + + dev_dbg(dev, + "%s: raw data is cr1=%02x, cr2=%02x, cr3=%02x, ts_sc=%02x, ts_mn=%02x, ts_hr=%02x, ts_dm=%02x, ts_mo=%02x, ts_yr=%02x\n", + __func__, data[PCF2127_REG_CTRL1], data[PCF2127_REG_CTRL2], + data[PCF2127_REG_CTRL3], data[PCF2127_REG_TS_SC], + data[PCF2127_REG_TS_MN], data[PCF2127_REG_TS_HR], + data[PCF2127_REG_TS_DM], data[PCF2127_REG_TS_MO], + data[PCF2127_REG_TS_YR]); + + tm.tm_sec = bcd2bin(data[PCF2127_REG_TS_SC] & 0x7F); + tm.tm_min = bcd2bin(data[PCF2127_REG_TS_MN] & 0x7F); + tm.tm_hour = bcd2bin(data[PCF2127_REG_TS_HR] & 0x3F); + tm.tm_mday = bcd2bin(data[PCF2127_REG_TS_DM] & 0x3F); + /* TS_MO register (month) value range: 1-12 */ + tm.tm_mon = bcd2bin(data[PCF2127_REG_TS_MO] & 0x1F) - 1; + tm.tm_year = bcd2bin(data[PCF2127_REG_TS_YR]); + if (tm.tm_year < 70) + tm.tm_year += 100; /* assume we are in 1970...2069 */ + + ret = rtc_valid_tm(&tm); + if (ret) { + dev_err(dev, "Invalid timestamp. ret=%d\n", ret); + return ret; + } + + *ts = rtc_tm_to_time64(&tm); + return 0; +}; + +static void pcf2127_rtc_ts_snapshot(struct device *dev) +{ + struct pcf2127 *pcf2127 = dev_get_drvdata(dev); + int ret; + + /* Let userspace read the first timestamp */ + if (pcf2127->ts_valid) + return; + + ret = pcf2127_rtc_ts_read(dev, &pcf2127->ts); + if (!ret) + pcf2127->ts_valid = true; +} + static irqreturn_t pcf2127_rtc_irq(int irq, void *dev) { struct pcf2127 *pcf2127 = dev_get_drvdata(dev); - unsigned int ctrl2 = 0; + unsigned int ctrl1, ctrl2; int ret = 0; + ret = regmap_read(pcf2127->regmap, PCF2127_REG_CTRL1, &ctrl1); + if (ret) + return IRQ_NONE; + ret = regmap_read(pcf2127->regmap, PCF2127_REG_CTRL2, &ctrl2); if (ret) return IRQ_NONE; - if (!(ctrl2 & PCF2127_BIT_CTRL2_AF)) + if (!(ctrl1 & PCF2127_CTRL1_IRQ_MASK || ctrl2 & PCF2127_CTRL2_IRQ_MASK)) return IRQ_NONE; - regmap_write(pcf2127->regmap, PCF2127_REG_CTRL2, - ctrl2 & ~(PCF2127_BIT_CTRL2_AF | PCF2127_BIT_CTRL2_WDTF)); + if (ctrl1 & PCF2127_BIT_CTRL1_TSF1 || ctrl2 & PCF2127_BIT_CTRL2_TSF2) + pcf2127_rtc_ts_snapshot(dev); + + if (ctrl1 & PCF2127_CTRL1_IRQ_MASK) + regmap_write(pcf2127->regmap, PCF2127_REG_CTRL1, + ctrl1 & ~PCF2127_CTRL1_IRQ_MASK); + + if (ctrl2 & PCF2127_CTRL2_IRQ_MASK) + regmap_write(pcf2127->regmap, PCF2127_REG_CTRL2, + ctrl2 & ~PCF2127_CTRL2_IRQ_MASK); - rtc_update_irq(pcf2127->rtc, 1, RTC_IRQF | RTC_AF); + if (ctrl2 & PCF2127_BIT_CTRL2_AF) + rtc_update_irq(pcf2127->rtc, 1, RTC_IRQF | RTC_AF); pcf2127_wdt_active_ping(&pcf2127->wdd); @@ -475,23 +558,27 @@ static ssize_t timestamp0_store(struct device *dev, struct pcf2127 *pcf2127 = dev_get_drvdata(dev->parent); int ret; - ret = regmap_update_bits(pcf2127->regmap, PCF2127_REG_CTRL1, - PCF2127_BIT_CTRL1_TSF1, 0); - if (ret) { - dev_err(dev, "%s: update ctrl1 ret=%d\n", __func__, ret); - return ret; - } + if (pcf2127->irq_enabled) { + pcf2127->ts_valid = false; + } else { + ret = regmap_update_bits(pcf2127->regmap, PCF2127_REG_CTRL1, + PCF2127_BIT_CTRL1_TSF1, 0); + if (ret) { + dev_err(dev, "%s: update ctrl1 ret=%d\n", __func__, ret); + return ret; + } - ret = regmap_update_bits(pcf2127->regmap, PCF2127_REG_CTRL2, - PCF2127_BIT_CTRL2_TSF2, 0); - if (ret) { - dev_err(dev, "%s: update ctrl2 ret=%d\n", __func__, ret); - return ret; - } + ret = regmap_update_bits(pcf2127->regmap, PCF2127_REG_CTRL2, + PCF2127_BIT_CTRL2_TSF2, 0); + if (ret) { + dev_err(dev, "%s: update ctrl2 ret=%d\n", __func__, ret); + return ret; + } - ret = pcf2127_wdt_active_ping(&pcf2127->wdd); - if (ret) - return ret; + ret = pcf2127_wdt_active_ping(&pcf2127->wdd); + if (ret) + return ret; + } return count; }; @@ -500,50 +587,36 @@ static ssize_t timestamp0_show(struct device *dev, struct device_attribute *attr, char *buf) { struct pcf2127 *pcf2127 = dev_get_drvdata(dev->parent); - struct rtc_time tm; + unsigned int ctrl1, ctrl2; int ret; - unsigned char data[25]; - - ret = regmap_bulk_read(pcf2127->regmap, PCF2127_REG_CTRL1, data, - sizeof(data)); - if (ret) { - dev_err(dev, "%s: read error ret=%d\n", __func__, ret); - return ret; - } - - dev_dbg(dev, - "%s: raw data is cr1=%02x, cr2=%02x, cr3=%02x, ts_sc=%02x, " - "ts_mn=%02x, ts_hr=%02x, ts_dm=%02x, ts_mo=%02x, ts_yr=%02x\n", - __func__, data[PCF2127_REG_CTRL1], data[PCF2127_REG_CTRL2], - data[PCF2127_REG_CTRL3], data[PCF2127_REG_TS_SC], - data[PCF2127_REG_TS_MN], data[PCF2127_REG_TS_HR], - data[PCF2127_REG_TS_DM], data[PCF2127_REG_TS_MO], - data[PCF2127_REG_TS_YR]); + time64_t ts; + + if (pcf2127->irq_enabled) { + if (!pcf2127->ts_valid) + return 0; + ts = pcf2127->ts; + } else { + ret = regmap_read(pcf2127->regmap, PCF2127_REG_CTRL1, &ctrl1); + if (ret) + return 0; - ret = pcf2127_wdt_active_ping(&pcf2127->wdd); - if (ret) - return ret; + ret = regmap_read(pcf2127->regmap, PCF2127_REG_CTRL2, &ctrl2); + if (ret) + return 0; - if (!(data[PCF2127_REG_CTRL1] & PCF2127_BIT_CTRL1_TSF1) && - !(data[PCF2127_REG_CTRL2] & PCF2127_BIT_CTRL2_TSF2)) - return 0; + if (!(ctrl1 & PCF2127_BIT_CTRL1_TSF1) && + !(ctrl2 & PCF2127_BIT_CTRL2_TSF2)) + return 0; - tm.tm_sec = bcd2bin(data[PCF2127_REG_TS_SC] & 0x7F); - tm.tm_min = bcd2bin(data[PCF2127_REG_TS_MN] & 0x7F); - tm.tm_hour = bcd2bin(data[PCF2127_REG_TS_HR] & 0x3F); - tm.tm_mday = bcd2bin(data[PCF2127_REG_TS_DM] & 0x3F); - /* TS_MO register (month) value range: 1-12 */ - tm.tm_mon = bcd2bin(data[PCF2127_REG_TS_MO] & 0x1F) - 1; - tm.tm_year = bcd2bin(data[PCF2127_REG_TS_YR]); - if (tm.tm_year < 70) - tm.tm_year += 100; /* assume we are in 1970...2069 */ - - ret = rtc_valid_tm(&tm); - if (ret) - return ret; + ret = pcf2127_rtc_ts_read(dev->parent, &ts); + if (ret) + return 0; - return sprintf(buf, "%llu\n", - (unsigned long long)rtc_tm_to_time64(&tm)); + ret = pcf2127_wdt_active_ping(&pcf2127->wdd); + if (ret) + return ret; + } + return sprintf(buf, "%llu\n", (unsigned long long)ts); }; static DEVICE_ATTR_RW(timestamp0); @@ -594,6 +667,7 @@ static int pcf2127_probe(struct device *dev, struct regmap *regmap, dev_err(dev, "failed to request alarm irq\n"); return ret; } + pcf2127->irq_enabled = true; } if (alarm_irq > 0 || device_property_read_bool(dev, "wakeup-source")) { -- cgit v1.2.3 From 4aa90c036df670b8757140e0dae2a94e7b0d42b4 Mon Sep 17 00:00:00 2001 From: Alexandre Belloni Date: Sat, 10 Jul 2021 23:14:31 +0200 Subject: rtc: pcf8523: rename register and bit defines arch/arm/mach-ixp4xx/include/mach/platform.h now gets included indirectly and defines REG_OFFSET. Rename the register and bit definition to something specific to the driver. Fixes: 7fd70c65faac ("ARM: irqstat: Get rid of duplicated declaration") Reported-by: kernel test robot Signed-off-by: Alexandre Belloni Link: https://lore.kernel.org/r/20210710211431.1393589-1-alexandre.belloni@bootlin.com --- drivers/rtc/rtc-pcf8523.c | 146 +++++++++++++++++++++++----------------------- 1 file changed, 73 insertions(+), 73 deletions(-) diff --git a/drivers/rtc/rtc-pcf8523.c b/drivers/rtc/rtc-pcf8523.c index 740e2136ca98..8b6fb20774bf 100644 --- a/drivers/rtc/rtc-pcf8523.c +++ b/drivers/rtc/rtc-pcf8523.c @@ -10,41 +10,41 @@ #include #include -#define REG_CONTROL1 0x00 -#define REG_CONTROL1_CAP_SEL BIT(7) -#define REG_CONTROL1_STOP BIT(5) -#define REG_CONTROL1_AIE BIT(1) - -#define REG_CONTROL2 0x01 -#define REG_CONTROL2_AF BIT(3) - -#define REG_CONTROL3 0x02 -#define REG_CONTROL3_PM_BLD BIT(7) /* battery low detection disabled */ -#define REG_CONTROL3_PM_VDD BIT(6) /* switch-over disabled */ -#define REG_CONTROL3_PM_DSM BIT(5) /* direct switching mode */ -#define REG_CONTROL3_PM_MASK 0xe0 -#define REG_CONTROL3_BLF BIT(2) /* battery low bit, read-only */ - -#define REG_SECONDS 0x03 -#define REG_SECONDS_OS BIT(7) - -#define REG_MINUTES 0x04 -#define REG_HOURS 0x05 -#define REG_DAYS 0x06 -#define REG_WEEKDAYS 0x07 -#define REG_MONTHS 0x08 -#define REG_YEARS 0x09 - -#define REG_MINUTE_ALARM 0x0a -#define REG_HOUR_ALARM 0x0b -#define REG_DAY_ALARM 0x0c -#define REG_WEEKDAY_ALARM 0x0d +#define PCF8523_REG_CONTROL1 0x00 +#define PCF8523_CONTROL1_CAP_SEL BIT(7) +#define PCF8523_CONTROL1_STOP BIT(5) +#define PCF8523_CONTROL1_AIE BIT(1) + +#define PCF8523_REG_CONTROL2 0x01 +#define PCF8523_CONTROL2_AF BIT(3) + +#define PCF8523_REG_CONTROL3 0x02 +#define PCF8523_CONTROL3_PM_BLD BIT(7) /* battery low detection disabled */ +#define PCF8523_CONTROL3_PM_VDD BIT(6) /* switch-over disabled */ +#define PCF8523_CONTROL3_PM_DSM BIT(5) /* direct switching mode */ +#define PCF8523_CONTROL3_PM_MASK 0xe0 +#define PCF8523_CONTROL3_BLF BIT(2) /* battery low bit, read-only */ + +#define PCF8523_REG_SECONDS 0x03 +#define PCF8523_SECONDS_OS BIT(7) + +#define PCF8523_REG_MINUTES 0x04 +#define PCF8523_REG_HOURS 0x05 +#define PCF8523_REG_DAYS 0x06 +#define PCF8523_REG_WEEKDAYS 0x07 +#define PCF8523_REG_MONTHS 0x08 +#define PCF8523_REG_YEARS 0x09 + +#define PCF8523_REG_MINUTE_ALARM 0x0a +#define PCF8523_REG_HOUR_ALARM 0x0b +#define PCF8523_REG_DAY_ALARM 0x0c +#define PCF8523_REG_WEEKDAY_ALARM 0x0d #define ALARM_DIS BIT(7) -#define REG_OFFSET 0x0e -#define REG_OFFSET_MODE BIT(7) +#define PCF8523_REG_OFFSET 0x0e +#define PCF8523_OFFSET_MODE BIT(7) -#define REG_TMR_CLKOUT_CTRL 0x0f +#define PCF8523_TMR_CLKOUT_CTRL 0x0f struct pcf8523 { struct rtc_device *rtc; @@ -99,11 +99,11 @@ static int pcf8523_voltage_low(struct i2c_client *client) u8 value; int err; - err = pcf8523_read(client, REG_CONTROL3, &value); + err = pcf8523_read(client, PCF8523_REG_CONTROL3, &value); if (err < 0) return err; - return !!(value & REG_CONTROL3_BLF); + return !!(value & PCF8523_CONTROL3_BLF); } static int pcf8523_load_capacitance(struct i2c_client *client) @@ -112,7 +112,7 @@ static int pcf8523_load_capacitance(struct i2c_client *client) u8 value; int err; - err = pcf8523_read(client, REG_CONTROL1, &value); + err = pcf8523_read(client, PCF8523_REG_CONTROL1, &value); if (err < 0) return err; @@ -126,14 +126,14 @@ static int pcf8523_load_capacitance(struct i2c_client *client) load); fallthrough; case 12500: - value |= REG_CONTROL1_CAP_SEL; + value |= PCF8523_CONTROL1_CAP_SEL; break; case 7000: - value &= ~REG_CONTROL1_CAP_SEL; + value &= ~PCF8523_CONTROL1_CAP_SEL; break; } - err = pcf8523_write(client, REG_CONTROL1, value); + err = pcf8523_write(client, PCF8523_REG_CONTROL1, value); return err; } @@ -143,13 +143,13 @@ static int pcf8523_set_pm(struct i2c_client *client, u8 pm) u8 value; int err; - err = pcf8523_read(client, REG_CONTROL3, &value); + err = pcf8523_read(client, PCF8523_REG_CONTROL3, &value); if (err < 0) return err; - value = (value & ~REG_CONTROL3_PM_MASK) | pm; + value = (value & ~PCF8523_CONTROL3_PM_MASK) | pm; - err = pcf8523_write(client, REG_CONTROL3, value); + err = pcf8523_write(client, PCF8523_REG_CONTROL3, value); if (err < 0) return err; @@ -162,13 +162,13 @@ static irqreturn_t pcf8523_irq(int irq, void *dev_id) u8 value; int err; - err = pcf8523_read(pcf8523->client, REG_CONTROL2, &value); + err = pcf8523_read(pcf8523->client, PCF8523_REG_CONTROL2, &value); if (err < 0) return IRQ_HANDLED; - if (value & REG_CONTROL2_AF) { - value &= ~REG_CONTROL2_AF; - pcf8523_write(pcf8523->client, REG_CONTROL2, value); + if (value & PCF8523_CONTROL2_AF) { + value &= ~PCF8523_CONTROL2_AF; + pcf8523_write(pcf8523->client, PCF8523_REG_CONTROL2, value); rtc_update_irq(pcf8523->rtc, 1, RTC_IRQF | RTC_AF); return IRQ_HANDLED; @@ -182,13 +182,13 @@ static int pcf8523_stop_rtc(struct i2c_client *client) u8 value; int err; - err = pcf8523_read(client, REG_CONTROL1, &value); + err = pcf8523_read(client, PCF8523_REG_CONTROL1, &value); if (err < 0) return err; - value |= REG_CONTROL1_STOP; + value |= PCF8523_CONTROL1_STOP; - err = pcf8523_write(client, REG_CONTROL1, value); + err = pcf8523_write(client, PCF8523_REG_CONTROL1, value); if (err < 0) return err; @@ -200,13 +200,13 @@ static int pcf8523_start_rtc(struct i2c_client *client) u8 value; int err; - err = pcf8523_read(client, REG_CONTROL1, &value); + err = pcf8523_read(client, PCF8523_REG_CONTROL1, &value); if (err < 0) return err; - value &= ~REG_CONTROL1_STOP; + value &= ~PCF8523_CONTROL1_STOP; - err = pcf8523_write(client, REG_CONTROL1, value); + err = pcf8523_write(client, PCF8523_REG_CONTROL1, value); if (err < 0) return err; @@ -216,7 +216,7 @@ static int pcf8523_start_rtc(struct i2c_client *client) static int pcf8523_rtc_read_time(struct device *dev, struct rtc_time *tm) { struct i2c_client *client = to_i2c_client(dev); - u8 start = REG_SECONDS, regs[7]; + u8 start = PCF8523_REG_SECONDS, regs[7]; struct i2c_msg msgs[2]; int err; @@ -242,7 +242,7 @@ static int pcf8523_rtc_read_time(struct device *dev, struct rtc_time *tm) if (err < 0) return err; - if (regs[0] & REG_SECONDS_OS) + if (regs[0] & PCF8523_SECONDS_OS) return -EINVAL; tm->tm_sec = bcd2bin(regs[0] & 0x7f); @@ -267,8 +267,8 @@ static int pcf8523_rtc_set_time(struct device *dev, struct rtc_time *tm) if (err < 0) return err; - regs[0] = REG_SECONDS; - /* This will purposely overwrite REG_SECONDS_OS */ + regs[0] = PCF8523_REG_SECONDS; + /* This will purposely overwrite PCF8523_SECONDS_OS */ regs[1] = bin2bcd(tm->tm_sec); regs[2] = bin2bcd(tm->tm_min); regs[3] = bin2bcd(tm->tm_hour); @@ -299,7 +299,7 @@ static int pcf8523_rtc_set_time(struct device *dev, struct rtc_time *tm) static int pcf8523_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *tm) { struct i2c_client *client = to_i2c_client(dev); - u8 start = REG_MINUTE_ALARM, regs[4]; + u8 start = PCF8523_REG_MINUTE_ALARM, regs[4]; struct i2c_msg msgs[2]; u8 value; int err; @@ -324,15 +324,15 @@ static int pcf8523_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *tm) tm->time.tm_mday = bcd2bin(regs[2] & 0x3F); tm->time.tm_wday = bcd2bin(regs[3] & 0x7); - err = pcf8523_read(client, REG_CONTROL1, &value); + err = pcf8523_read(client, PCF8523_REG_CONTROL1, &value); if (err < 0) return err; - tm->enabled = !!(value & REG_CONTROL1_AIE); + tm->enabled = !!(value & PCF8523_CONTROL1_AIE); - err = pcf8523_read(client, REG_CONTROL2, &value); + err = pcf8523_read(client, PCF8523_REG_CONTROL2, &value); if (err < 0) return err; - tm->pending = !!(value & REG_CONTROL2_AF); + tm->pending = !!(value & PCF8523_CONTROL2_AF); return 0; } @@ -343,16 +343,16 @@ static int pcf8523_irq_enable(struct device *dev, unsigned int enabled) u8 value; int err; - err = pcf8523_read(client, REG_CONTROL1, &value); + err = pcf8523_read(client, PCF8523_REG_CONTROL1, &value); if (err < 0) return err; - value &= REG_CONTROL1_AIE; + value &= PCF8523_CONTROL1_AIE; if (enabled) - value |= REG_CONTROL1_AIE; + value |= PCF8523_CONTROL1_AIE; - err = pcf8523_write(client, REG_CONTROL1, value); + err = pcf8523_write(client, PCF8523_REG_CONTROL1, value); if (err < 0) return err; @@ -370,7 +370,7 @@ static int pcf8523_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *tm) if (err) return err; - err = pcf8523_write(client, REG_CONTROL2, 0); + err = pcf8523_write(client, PCF8523_REG_CONTROL2, 0); if (err < 0) return err; @@ -382,7 +382,7 @@ static int pcf8523_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *tm) rtc_time64_to_tm(alarm_time, &tm->time); } - regs[0] = REG_MINUTE_ALARM; + regs[0] = PCF8523_REG_MINUTE_ALARM; regs[1] = bin2bcd(tm->time.tm_min); regs[2] = bin2bcd(tm->time.tm_hour); regs[3] = bin2bcd(tm->time.tm_mday); @@ -418,11 +418,11 @@ static int pcf8523_rtc_ioctl(struct device *dev, unsigned int cmd, if (ret) flags |= RTC_VL_BACKUP_LOW; - ret = pcf8523_read(client, REG_SECONDS, &value); + ret = pcf8523_read(client, PCF8523_REG_SECONDS, &value); if (ret < 0) return ret; - if (value & REG_SECONDS_OS) + if (value & PCF8523_SECONDS_OS) flags |= RTC_VL_DATA_INVALID; return put_user(flags, (unsigned int __user *)arg); @@ -442,13 +442,13 @@ static int pcf8523_rtc_read_offset(struct device *dev, long *offset) u8 value; s8 val; - err = pcf8523_read(client, REG_OFFSET, &value); + err = pcf8523_read(client, PCF8523_REG_OFFSET, &value); if (err < 0) return err; /* sign extend the 7-bit offset value */ val = value << 1; - *offset = (value & REG_OFFSET_MODE ? 4069 : 4340) * (val >> 1); + *offset = (value & PCF8523_OFFSET_MODE ? 4069 : 4340) * (val >> 1); return 0; } @@ -465,9 +465,9 @@ static int pcf8523_rtc_set_offset(struct device *dev, long offset) if (abs(reg_m0 * 4340 - offset) < abs(reg_m1 * 4069 - offset)) value = reg_m0 & 0x7f; else - value = (reg_m1 & 0x7f) | REG_OFFSET_MODE; + value = (reg_m1 & 0x7f) | PCF8523_OFFSET_MODE; - return pcf8523_write(client, REG_OFFSET, value); + return pcf8523_write(client, PCF8523_REG_OFFSET, value); } static const struct rtc_class_ops pcf8523_rtc_ops = { @@ -519,7 +519,7 @@ static int pcf8523_probe(struct i2c_client *client, rtc->uie_unsupported = 1; if (client->irq > 0) { - err = pcf8523_write(client, REG_TMR_CLKOUT_CTRL, 0x38); + err = pcf8523_write(client, PCF8523_TMR_CLKOUT_CTRL, 0x38); if (err < 0) return err; -- cgit v1.2.3