From 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 16 Apr 2005 15:20:36 -0700 Subject: Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! --- Documentation/pci.txt | 284 ++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 284 insertions(+) create mode 100644 Documentation/pci.txt (limited to 'Documentation/pci.txt') diff --git a/Documentation/pci.txt b/Documentation/pci.txt new file mode 100644 index 000000000000..67514bf87ccd --- /dev/null +++ b/Documentation/pci.txt @@ -0,0 +1,284 @@ + How To Write Linux PCI Drivers + + by Martin Mares on 07-Feb-2000 + +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +The world of PCI is vast and it's full of (mostly unpleasant) surprises. +Different PCI devices have different requirements and different bugs -- +because of this, the PCI support layer in Linux kernel is not as trivial +as one would wish. This short pamphlet tries to help all potential driver +authors find their way through the deep forests of PCI handling. + + +0. Structure of PCI drivers +~~~~~~~~~~~~~~~~~~~~~~~~~~~ +There exist two kinds of PCI drivers: new-style ones (which leave most of +probing for devices to the PCI layer and support online insertion and removal +of devices [thus supporting PCI, hot-pluggable PCI and CardBus in a single +driver]) and old-style ones which just do all the probing themselves. Unless +you have a very good reason to do so, please don't use the old way of probing +in any new code. After the driver finds the devices it wishes to operate +on (either the old or the new way), it needs to perform the following steps: + + Enable the device + Access device configuration space + Discover resources (addresses and IRQ numbers) provided by the device + Allocate these resources + Communicate with the device + Disable the device + +Most of these topics are covered by the following sections, for the rest +look at , it's hopefully well commented. + +If the PCI subsystem is not configured (CONFIG_PCI is not set), most of +the functions described below are defined as inline functions either completely +empty or just returning an appropriate error codes to avoid lots of ifdefs +in the drivers. + + +1. New-style drivers +~~~~~~~~~~~~~~~~~~~~ +The new-style drivers just call pci_register_driver during their initialization +with a pointer to a structure describing the driver (struct pci_driver) which +contains: + + name Name of the driver + id_table Pointer to table of device ID's the driver is + interested in. Most drivers should export this + table using MODULE_DEVICE_TABLE(pci,...). + probe Pointer to a probing function which gets called (during + execution of pci_register_driver for already existing + devices or later if a new device gets inserted) for all + PCI devices which match the ID table and are not handled + by the other drivers yet. This function gets passed a + pointer to the pci_dev structure representing the device + and also which entry in the ID table did the device + match. It returns zero when the driver has accepted the + device or an error code (negative number) otherwise. + This function always gets called from process context, + so it can sleep. + remove Pointer to a function which gets called whenever a + device being handled by this driver is removed (either + during deregistration of the driver or when it's + manually pulled out of a hot-pluggable slot). This + function always gets called from process context, so it + can sleep. + save_state Save a device's state before it's suspend. + suspend Put device into low power state. + resume Wake device from low power state. + enable_wake Enable device to generate wake events from a low power + state. + + (Please see Documentation/power/pci.txt for descriptions + of PCI Power Management and the related functions) + +The ID table is an array of struct pci_device_id ending with a all-zero entry. +Each entry consists of: + + vendor, device Vendor and device ID to match (or PCI_ANY_ID) + subvendor, Subsystem vendor and device ID to match (or PCI_ANY_ID) + subdevice + class, Device class to match. The class_mask tells which bits + class_mask of the class are honored during the comparison. + driver_data Data private to the driver. + +Most drivers don't need to use the driver_data field. Best practice +for use of driver_data is to use it as an index into a static list of +equivalant device types, not to use it as a pointer. + +Have a table entry {PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID} +to have probe() called for every PCI device known to the system. + +New PCI IDs may be added to a device driver at runtime by writing +to the file /sys/bus/pci/drivers/{driver}/new_id. When added, the +driver will probe for all devices it can support. + +echo "vendor device subvendor subdevice class class_mask driver_data" > \ + /sys/bus/pci/drivers/{driver}/new_id +where all fields are passed in as hexadecimal values (no leading 0x). +Users need pass only as many fields as necessary; vendor, device, +subvendor, and subdevice fields default to PCI_ANY_ID (FFFFFFFF), +class and classmask fields default to 0, and driver_data defaults to +0UL. Device drivers must initialize use_driver_data in the dynids struct +in their pci_driver struct prior to calling pci_register_driver in order +for the driver_data field to get passed to the driver. Otherwise, only a +0 is passed in that field. + +When the driver exits, it just calls pci_unregister_driver() and the PCI layer +automatically calls the remove hook for all devices handled by the driver. + +Please mark the initialization and cleanup functions where appropriate +(the corresponding macros are defined in ): + + __init Initialization code. Thrown away after the driver + initializes. + __exit Exit code. Ignored for non-modular drivers. + __devinit Device initialization code. Identical to __init if + the kernel is not compiled with CONFIG_HOTPLUG, normal + function otherwise. + __devexit The same for __exit. + +Tips: + The module_init()/module_exit() functions (and all initialization + functions called only from these) should be marked __init/exit. + The struct pci_driver shouldn't be marked with any of these tags. + The ID table array should be marked __devinitdata. + The probe() and remove() functions (and all initialization + functions called only from these) should be marked __devinit/exit. + If you are sure the driver is not a hotplug driver then use only + __init/exit __initdata/exitdata. + + Pointers to functions marked as __devexit must be created using + __devexit_p(function_name). That will generate the function + name or NULL if the __devexit function will be discarded. + + +2. How to find PCI devices manually (the old style) +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +PCI drivers not using the pci_register_driver() interface search +for PCI devices manually using the following constructs: + +Searching by vendor and device ID: + + struct pci_dev *dev = NULL; + while (dev = pci_get_device(VENDOR_ID, DEVICE_ID, dev)) + configure_device(dev); + +Searching by class ID (iterate in a similar way): + + pci_get_class(CLASS_ID, dev) + +Searching by both vendor/device and subsystem vendor/device ID: + + pci_get_subsys(VENDOR_ID, DEVICE_ID, SUBSYS_VENDOR_ID, SUBSYS_DEVICE_ID, dev). + + You can use the constant PCI_ANY_ID as a wildcard replacement for +VENDOR_ID or DEVICE_ID. This allows searching for any device from a +specific vendor, for example. + + These functions are hotplug-safe. They increment the reference count on +the pci_dev that they return. You must eventually (possibly at module unload) +decrement the reference count on these devices by calling pci_dev_put(). + + +3. Enabling and disabling devices +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + Before you do anything with the device you've found, you need to enable +it by calling pci_enable_device() which enables I/O and memory regions of +the device, allocates an IRQ if necessary, assigns missing resources if +needed and wakes up the device if it was in suspended state. Please note +that this function can fail. + + If you want to use the device in bus mastering mode, call pci_set_master() +which enables the bus master bit in PCI_COMMAND register and also fixes +the latency timer value if it's set to something bogus by the BIOS. + + If you want to use the PCI Memory-Write-Invalidate transaction, +call pci_set_mwi(). This enables the PCI_COMMAND bit for Mem-Wr-Inval +and also ensures that the cache line size register is set correctly. +Make sure to check the return value of pci_set_mwi(), not all architectures +may support Memory-Write-Invalidate. + + If your driver decides to stop using the device (e.g., there was an +error while setting it up or the driver module is being unloaded), it +should call pci_disable_device() to deallocate any IRQ resources, disable +PCI bus-mastering, etc. You should not do anything with the device after +calling pci_disable_device(). + +4. How to access PCI config space +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + You can use pci_(read|write)_config_(byte|word|dword) to access the config +space of a device represented by struct pci_dev *. All these functions return 0 +when successful or an error code (PCIBIOS_...) which can be translated to a text +string by pcibios_strerror. Most drivers expect that accesses to valid PCI +devices don't fail. + + If you don't have a struct pci_dev available, you can call +pci_bus_(read|write)_config_(byte|word|dword) to access a given device +and function on that bus. + + If you access fields in the standard portion of the config header, please +use symbolic names of locations and bits declared in . + + If you need to access Extended PCI Capability registers, just call +pci_find_capability() for the particular capability and it will find the +corresponding register block for you. + + +5. Addresses and interrupts +~~~~~~~~~~~~~~~~~~~~~~~~~~~ + Memory and port addresses and interrupt numbers should NOT be read from the +config space. You should use the values in the pci_dev structure as they might +have been remapped by the kernel. + + See Documentation/IO-mapping.txt for how to access device memory. + + You still need to call request_region() for I/O regions and +request_mem_region() for memory regions to make sure nobody else is using the +same device. + + All interrupt handlers should be registered with SA_SHIRQ and use the devid +to map IRQs to devices (remember that all PCI interrupts are shared). + + +6. Other interesting functions +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +pci_find_slot() Find pci_dev corresponding to given bus and + slot numbers. +pci_set_power_state() Set PCI Power Management state (0=D0 ... 3=D3) +pci_find_capability() Find specified capability in device's capability + list. +pci_module_init() Inline helper function for ensuring correct + pci_driver initialization and error handling. +pci_resource_start() Returns bus start address for a given PCI region +pci_resource_end() Returns bus end address for a given PCI region +pci_resource_len() Returns the byte length of a PCI region +pci_set_drvdata() Set private driver data pointer for a pci_dev +pci_get_drvdata() Return private driver data pointer for a pci_dev +pci_set_mwi() Enable Memory-Write-Invalidate transactions. +pci_clear_mwi() Disable Memory-Write-Invalidate transactions. + + +7. Miscellaneous hints +~~~~~~~~~~~~~~~~~~~~~~ +When displaying PCI slot names to the user (for example when a driver wants +to tell the user what card has it found), please use pci_name(pci_dev) +for this purpose. + +Always refer to the PCI devices by a pointer to the pci_dev structure. +All PCI layer functions use this identification and it's the only +reasonable one. Don't use bus/slot/function numbers except for very +special purposes -- on systems with multiple primary buses their semantics +can be pretty complex. + +If you're going to use PCI bus mastering DMA, take a look at +Documentation/DMA-mapping.txt. + +Don't try to turn on Fast Back to Back writes in your driver. All devices +on the bus need to be capable of doing it, so this is something which needs +to be handled by platform and generic code, not individual drivers. + + +8. Obsolete functions +~~~~~~~~~~~~~~~~~~~~~ +There are several functions which you might come across when trying to +port an old driver to the new PCI interface. They are no longer present +in the kernel as they aren't compatible with hotplug or PCI domains or +having sane locking. + +pcibios_present() and Since ages, you don't need to test presence +pci_present() of PCI subsystem when trying to talk to it. + If it's not there, the list of PCI devices + is empty and all functions for searching for + devices just return NULL. +pcibios_(read|write)_* Superseded by their pci_(read|write)_* + counterparts. +pcibios_find_* Superseded by their pci_get_* counterparts. +pci_for_each_dev() Superseded by pci_get_device() +pci_for_each_dev_reverse() Superseded by pci_find_device_reverse() +pci_for_each_bus() Superseded by pci_find_next_bus() +pci_find_device() Superseded by pci_get_device() +pci_find_subsys() Superseded by pci_get_subsys() +pcibios_find_class() Superseded by pci_get_class() +pci_find_class() Superseded by pci_get_class() +pci_(read|write)_*_nodev() Superseded by pci_bus_(read|write)_*() -- cgit v1.2.3