From ec84ca4025c0b90c6b7173a230f78ec00cad44f5 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Tue, 9 Apr 2024 16:37:48 +0200 Subject: scsi: block: Remove now unused queue limits helpers Signed-off-by: Christoph Hellwig Link: https://lore.kernel.org/r/20240409143748.980206-24-hch@lst.de Reviewed-by: Bart Van Assche Reviewed-by: John Garry Reviewed-by: Damien Le Moal Reviewed-by: Hannes Reinecke Reviewed-by: Johannes Thumshirn Signed-off-by: Martin K. Petersen --- block/blk-settings.c | 245 --------------------------------------------------- 1 file changed, 245 deletions(-) (limited to 'block/blk-settings.c') diff --git a/block/blk-settings.c b/block/blk-settings.c index 3c7d8d638ab5..292aadf8d807 100644 --- a/block/blk-settings.c +++ b/block/blk-settings.c @@ -284,72 +284,6 @@ int queue_limits_set(struct request_queue *q, struct queue_limits *lim) } EXPORT_SYMBOL_GPL(queue_limits_set); -/** - * blk_queue_bounce_limit - set bounce buffer limit for queue - * @q: the request queue for the device - * @bounce: bounce limit to enforce - * - * Description: - * Force bouncing for ISA DMA ranges or highmem. - * - * DEPRECATED, don't use in new code. - **/ -void blk_queue_bounce_limit(struct request_queue *q, enum blk_bounce bounce) -{ - q->limits.bounce = bounce; -} -EXPORT_SYMBOL(blk_queue_bounce_limit); - -/** - * blk_queue_max_hw_sectors - set max sectors for a request for this queue - * @q: the request queue for the device - * @max_hw_sectors: max hardware sectors in the usual 512b unit - * - * Description: - * Enables a low level driver to set a hard upper limit, - * max_hw_sectors, on the size of requests. max_hw_sectors is set by - * the device driver based upon the capabilities of the I/O - * controller. - * - * max_dev_sectors is a hard limit imposed by the storage device for - * READ/WRITE requests. It is set by the disk driver. - * - * max_sectors is a soft limit imposed by the block layer for - * filesystem type requests. This value can be overridden on a - * per-device basis in /sys/block//queue/max_sectors_kb. - * The soft limit can not exceed max_hw_sectors. - **/ -void blk_queue_max_hw_sectors(struct request_queue *q, unsigned int max_hw_sectors) -{ - struct queue_limits *limits = &q->limits; - unsigned int max_sectors; - - if ((max_hw_sectors << 9) < PAGE_SIZE) { - max_hw_sectors = 1 << (PAGE_SHIFT - 9); - pr_info("%s: set to minimum %u\n", __func__, max_hw_sectors); - } - - max_hw_sectors = round_down(max_hw_sectors, - limits->logical_block_size >> SECTOR_SHIFT); - limits->max_hw_sectors = max_hw_sectors; - - max_sectors = min_not_zero(max_hw_sectors, limits->max_dev_sectors); - - if (limits->max_user_sectors) - max_sectors = min(max_sectors, limits->max_user_sectors); - else - max_sectors = min(max_sectors, BLK_DEF_MAX_SECTORS_CAP); - - max_sectors = round_down(max_sectors, - limits->logical_block_size >> SECTOR_SHIFT); - limits->max_sectors = max_sectors; - - if (!q->disk) - return; - q->disk->bdi->io_pages = max_sectors >> (PAGE_SHIFT - 9); -} -EXPORT_SYMBOL(blk_queue_max_hw_sectors); - /** * blk_queue_chunk_sectors - set size of the chunk for this queue * @q: the request queue for the device @@ -436,65 +370,6 @@ void blk_queue_max_zone_append_sectors(struct request_queue *q, } EXPORT_SYMBOL_GPL(blk_queue_max_zone_append_sectors); -/** - * blk_queue_max_segments - set max hw segments for a request for this queue - * @q: the request queue for the device - * @max_segments: max number of segments - * - * Description: - * Enables a low level driver to set an upper limit on the number of - * hw data segments in a request. - **/ -void blk_queue_max_segments(struct request_queue *q, unsigned short max_segments) -{ - if (!max_segments) { - max_segments = 1; - pr_info("%s: set to minimum %u\n", __func__, max_segments); - } - - q->limits.max_segments = max_segments; -} -EXPORT_SYMBOL(blk_queue_max_segments); - -/** - * blk_queue_max_discard_segments - set max segments for discard requests - * @q: the request queue for the device - * @max_segments: max number of segments - * - * Description: - * Enables a low level driver to set an upper limit on the number of - * segments in a discard request. - **/ -void blk_queue_max_discard_segments(struct request_queue *q, - unsigned short max_segments) -{ - q->limits.max_discard_segments = max_segments; -} -EXPORT_SYMBOL_GPL(blk_queue_max_discard_segments); - -/** - * blk_queue_max_segment_size - set max segment size for blk_rq_map_sg - * @q: the request queue for the device - * @max_size: max size of segment in bytes - * - * Description: - * Enables a low level driver to set an upper limit on the size of a - * coalesced segment - **/ -void blk_queue_max_segment_size(struct request_queue *q, unsigned int max_size) -{ - if (max_size < PAGE_SIZE) { - max_size = PAGE_SIZE; - pr_info("%s: set to minimum %u\n", __func__, max_size); - } - - /* see blk_queue_virt_boundary() for the explanation */ - WARN_ON_ONCE(q->limits.virt_boundary_mask); - - q->limits.max_segment_size = max_size; -} -EXPORT_SYMBOL(blk_queue_max_segment_size); - /** * blk_queue_logical_block_size - set logical block size for the queue * @q: the request queue for the device @@ -661,29 +536,6 @@ void blk_limits_io_opt(struct queue_limits *limits, unsigned int opt) } EXPORT_SYMBOL(blk_limits_io_opt); -/** - * blk_queue_io_opt - set optimal request size for the queue - * @q: the request queue for the device - * @opt: optimal request size in bytes - * - * Description: - * Storage devices may report an optimal I/O size, which is the - * device's preferred unit for sustained I/O. This is rarely reported - * for disk drives. For RAID arrays it is usually the stripe width or - * the internal track size. A properly aligned multiple of - * optimal_io_size is the preferred request size for workloads where - * sustained throughput is desired. - */ -void blk_queue_io_opt(struct request_queue *q, unsigned int opt) -{ - blk_limits_io_opt(&q->limits, opt); - if (!q->disk) - return; - q->disk->bdi->ra_pages = - max(queue_io_opt(q) * 2 / PAGE_SIZE, VM_READAHEAD_PAGES); -} -EXPORT_SYMBOL(blk_queue_io_opt); - static int queue_limit_alignment_offset(const struct queue_limits *lim, sector_t sector) { @@ -933,81 +785,6 @@ void blk_queue_update_dma_pad(struct request_queue *q, unsigned int mask) } EXPORT_SYMBOL(blk_queue_update_dma_pad); -/** - * blk_queue_segment_boundary - set boundary rules for segment merging - * @q: the request queue for the device - * @mask: the memory boundary mask - **/ -void blk_queue_segment_boundary(struct request_queue *q, unsigned long mask) -{ - if (mask < PAGE_SIZE - 1) { - mask = PAGE_SIZE - 1; - pr_info("%s: set to minimum %lx\n", __func__, mask); - } - - q->limits.seg_boundary_mask = mask; -} -EXPORT_SYMBOL(blk_queue_segment_boundary); - -/** - * blk_queue_virt_boundary - set boundary rules for bio merging - * @q: the request queue for the device - * @mask: the memory boundary mask - **/ -void blk_queue_virt_boundary(struct request_queue *q, unsigned long mask) -{ - q->limits.virt_boundary_mask = mask; - - /* - * Devices that require a virtual boundary do not support scatter/gather - * I/O natively, but instead require a descriptor list entry for each - * page (which might not be idential to the Linux PAGE_SIZE). Because - * of that they are not limited by our notion of "segment size". - */ - if (mask) - q->limits.max_segment_size = UINT_MAX; -} -EXPORT_SYMBOL(blk_queue_virt_boundary); - -/** - * blk_queue_dma_alignment - set dma length and memory alignment - * @q: the request queue for the device - * @mask: alignment mask - * - * description: - * set required memory and length alignment for direct dma transactions. - * this is used when building direct io requests for the queue. - * - **/ -void blk_queue_dma_alignment(struct request_queue *q, int mask) -{ - q->limits.dma_alignment = mask; -} -EXPORT_SYMBOL(blk_queue_dma_alignment); - -/** - * blk_queue_update_dma_alignment - update dma length and memory alignment - * @q: the request queue for the device - * @mask: alignment mask - * - * description: - * update required memory and length alignment for direct dma transactions. - * If the requested alignment is larger than the current alignment, then - * the current queue alignment is updated to the new value, otherwise it - * is left alone. The design of this is to allow multiple objects - * (driver, device, transport etc) to set their respective - * alignments without having them interfere. - * - **/ -void blk_queue_update_dma_alignment(struct request_queue *q, int mask) -{ - BUG_ON(mask > PAGE_SIZE); - - if (mask > q->limits.dma_alignment) - q->limits.dma_alignment = mask; -} -EXPORT_SYMBOL(blk_queue_update_dma_alignment); - /** * blk_set_queue_depth - tell the block layer about the device queue depth * @q: the request queue for the device @@ -1061,28 +838,6 @@ void blk_queue_required_elevator_features(struct request_queue *q, } EXPORT_SYMBOL_GPL(blk_queue_required_elevator_features); -/** - * blk_queue_can_use_dma_map_merging - configure queue for merging segments. - * @q: the request queue for the device - * @dev: the device pointer for dma - * - * Tell the block layer about merging the segments by dma map of @q. - */ -bool blk_queue_can_use_dma_map_merging(struct request_queue *q, - struct device *dev) -{ - unsigned long boundary = dma_get_merge_boundary(dev); - - if (!boundary) - return false; - - /* No need to update max_segment_size. see blk_queue_virt_boundary() */ - blk_queue_virt_boundary(q, boundary); - - return true; -} -EXPORT_SYMBOL_GPL(blk_queue_can_use_dma_map_merging); - /** * disk_set_zoned - inidicate a zoned device * @disk: gendisk to configure -- cgit v1.2.3