From 68a7faa2006c022468adec11549b8b5e0a0f284a Mon Sep 17 00:00:00 2001 From: Tomasz Figa Date: Sun, 11 Aug 2013 19:59:13 +0200 Subject: dmaengine: PL08x: Refactor pl08x_getbytes_chan() to lower indentation Further patch will introduce support for PL080S, which requires some things to be done conditionally, thus increasing indentation level of some functions even more. This patch reduces indentation level of pl08x_getbytes_chan() function by inverting several conditions and returning from function wherever possible. Signed-off-by: Tomasz Figa Reviewed-by: Linus Walleij Signed-off-by: Vinod Koul --- drivers/dma/amba-pl08x.c | 53 ++++++++++++++++++++++++++---------------------- 1 file changed, 29 insertions(+), 24 deletions(-) (limited to 'drivers/dma/amba-pl08x.c') diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index 06fe45c74de5..6a12392bfa98 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -469,47 +469,52 @@ static inline u32 get_bytes_in_cctl(u32 cctl) /* The channel should be paused when calling this */ static u32 pl08x_getbytes_chan(struct pl08x_dma_chan *plchan) { + struct pl08x_lli *llis_va; struct pl08x_phy_chan *ch; + dma_addr_t llis_bus; struct pl08x_txd *txd; - size_t bytes = 0; + size_t bytes; + int index; + u32 clli; ch = plchan->phychan; txd = plchan->at; + if (!ch || !txd) + return 0; + /* * Follow the LLIs to get the number of remaining * bytes in the currently active transaction. */ - if (ch && txd) { - u32 clli = readl(ch->base + PL080_CH_LLI) & ~PL080_LLI_LM_AHB2; + clli = readl(ch->base + PL080_CH_LLI) & ~PL080_LLI_LM_AHB2; - /* First get the remaining bytes in the active transfer */ - bytes = get_bytes_in_cctl(readl(ch->base + PL080_CH_CONTROL)); + /* First get the remaining bytes in the active transfer */ + bytes = get_bytes_in_cctl(readl(ch->base + PL080_CH_CONTROL)); - if (clli) { - struct pl08x_lli *llis_va = txd->llis_va; - dma_addr_t llis_bus = txd->llis_bus; - int index; + if (!clli) + return bytes; - BUG_ON(clli < llis_bus || clli >= llis_bus + + llis_va = txd->llis_va; + llis_bus = txd->llis_bus; + + BUG_ON(clli < llis_bus || clli >= llis_bus + sizeof(struct pl08x_lli) * MAX_NUM_TSFR_LLIS); - /* - * Locate the next LLI - as this is an array, - * it's simple maths to find. - */ - index = (clli - llis_bus) / sizeof(struct pl08x_lli); + /* + * Locate the next LLI - as this is an array, + * it's simple maths to find. + */ + index = (clli - llis_bus) / sizeof(struct pl08x_lli); - for (; index < MAX_NUM_TSFR_LLIS; index++) { - bytes += get_bytes_in_cctl(llis_va[index].cctl); + for (; index < MAX_NUM_TSFR_LLIS; index++) { + bytes += get_bytes_in_cctl(llis_va[index].cctl); - /* - * A LLI pointer of 0 terminates the LLI list - */ - if (!llis_va[index].lli) - break; - } - } + /* + * A LLI pointer of 0 terminates the LLI list + */ + if (!llis_va[index].lli) + break; } return bytes; -- cgit v1.2.3 From d86ccea79485fcc637d3a69fdf6ebe90094da307 Mon Sep 17 00:00:00 2001 From: Tomasz Figa Date: Sun, 11 Aug 2013 19:59:14 +0200 Subject: dmaengine: PL08x: Add support for different offset of CONFIG register Some variants of PL08x (namely PL080S, found in Samsung S3C64xx SoCs) have CONFIG register at different offset. This patch makes the driver use offset from vendor data struct. Signed-off-by: Tomasz Figa Reviewed-by: Linus Walleij Signed-off-by: Vinod Koul --- drivers/dma/amba-pl08x.c | 30 ++++++++++++++++++------------ 1 file changed, 18 insertions(+), 12 deletions(-) (limited to 'drivers/dma/amba-pl08x.c') diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index 6a12392bfa98..2538e05de5bf 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -102,6 +102,7 @@ struct pl08x_driver_data; * missing */ struct vendor_data { + u8 config_offset; u8 channels; bool dualmaster; bool nomadik; @@ -145,6 +146,7 @@ struct pl08x_bus_data { struct pl08x_phy_chan { unsigned int id; void __iomem *base; + void __iomem *reg_config; spinlock_t lock; struct pl08x_dma_chan *serving; bool locked; @@ -334,7 +336,7 @@ static int pl08x_phy_channel_busy(struct pl08x_phy_chan *ch) { unsigned int val; - val = readl(ch->base + PL080_CH_CONFIG); + val = readl(ch->reg_config); return val & PL080_CONFIG_ACTIVE; } @@ -373,7 +375,7 @@ static void pl08x_start_next_txd(struct pl08x_dma_chan *plchan) writel(lli->dst, phychan->base + PL080_CH_DST_ADDR); writel(lli->lli, phychan->base + PL080_CH_LLI); writel(lli->cctl, phychan->base + PL080_CH_CONTROL); - writel(txd->ccfg, phychan->base + PL080_CH_CONFIG); + writel(txd->ccfg, phychan->reg_config); /* Enable the DMA channel */ /* Do not access config register until channel shows as disabled */ @@ -381,11 +383,11 @@ static void pl08x_start_next_txd(struct pl08x_dma_chan *plchan) cpu_relax(); /* Do not access config register until channel shows as inactive */ - val = readl(phychan->base + PL080_CH_CONFIG); + val = readl(phychan->reg_config); while ((val & PL080_CONFIG_ACTIVE) || (val & PL080_CONFIG_ENABLE)) - val = readl(phychan->base + PL080_CH_CONFIG); + val = readl(phychan->reg_config); - writel(val | PL080_CONFIG_ENABLE, phychan->base + PL080_CH_CONFIG); + writel(val | PL080_CONFIG_ENABLE, phychan->reg_config); } /* @@ -404,9 +406,9 @@ static void pl08x_pause_phy_chan(struct pl08x_phy_chan *ch) int timeout; /* Set the HALT bit and wait for the FIFO to drain */ - val = readl(ch->base + PL080_CH_CONFIG); + val = readl(ch->reg_config); val |= PL080_CONFIG_HALT; - writel(val, ch->base + PL080_CH_CONFIG); + writel(val, ch->reg_config); /* Wait for channel inactive */ for (timeout = 1000; timeout; timeout--) { @@ -423,9 +425,9 @@ static void pl08x_resume_phy_chan(struct pl08x_phy_chan *ch) u32 val; /* Clear the HALT bit */ - val = readl(ch->base + PL080_CH_CONFIG); + val = readl(ch->reg_config); val &= ~PL080_CONFIG_HALT; - writel(val, ch->base + PL080_CH_CONFIG); + writel(val, ch->reg_config); } /* @@ -437,12 +439,12 @@ static void pl08x_resume_phy_chan(struct pl08x_phy_chan *ch) static void pl08x_terminate_phy_chan(struct pl08x_driver_data *pl08x, struct pl08x_phy_chan *ch) { - u32 val = readl(ch->base + PL080_CH_CONFIG); + u32 val = readl(ch->reg_config); val &= ~(PL080_CONFIG_ENABLE | PL080_CONFIG_ERR_IRQ_MASK | PL080_CONFIG_TC_IRQ_MASK); - writel(val, ch->base + PL080_CH_CONFIG); + writel(val, ch->reg_config); writel(1 << ch->id, pl08x->base + PL080_ERR_CLEAR); writel(1 << ch->id, pl08x->base + PL080_TC_CLEAR); @@ -1952,6 +1954,7 @@ static int pl08x_probe(struct amba_device *adev, const struct amba_id *id) ch->id = i; ch->base = pl08x->base + PL080_Cx_BASE(i); + ch->reg_config = ch->base + vd->config_offset; spin_lock_init(&ch->lock); /* @@ -1962,7 +1965,7 @@ static int pl08x_probe(struct amba_device *adev, const struct amba_id *id) if (vd->nomadik) { u32 val; - val = readl(ch->base + PL080_CH_CONFIG); + val = readl(ch->reg_config); if (val & (PL080N_CONFIG_ITPROT | PL080N_CONFIG_SECPROT)) { dev_info(&adev->dev, "physical channel %d reserved for secure access only\n", i); ch->locked = true; @@ -2043,17 +2046,20 @@ out_no_pl08x: /* PL080 has 8 channels and the PL080 have just 2 */ static struct vendor_data vendor_pl080 = { + .config_offset = PL080_CH_CONFIG, .channels = 8, .dualmaster = true, }; static struct vendor_data vendor_nomadik = { + .config_offset = PL080_CH_CONFIG, .channels = 8, .dualmaster = true, .nomadik = true, }; static struct vendor_data vendor_pl081 = { + .config_offset = PL080_CH_CONFIG, .channels = 2, .dualmaster = false, }; -- cgit v1.2.3 From ba6785ffc85bcf967b0646f4e8b9b13fdbad3254 Mon Sep 17 00:00:00 2001 From: Tomasz Figa Date: Sun, 11 Aug 2013 19:59:15 +0200 Subject: dmaengine: PL08x: Rework LLI handling to be less fragile Currently memory allocated for LLIs is casted to an array of structs, which is fragile and also limits the driver to a single, predefined LLI layout, while there are some variants of PL08x, which have more fields in LLI (namely PL080S with its extra CCTL2). This patch makes LLIs a sequence of 32-bit words, which is just filled with appropriate values in appropriate order and padded with required amount of dummy words (currently zero, but PL080S will make better use of this). Suggested-by: Linus Walleij Signed-off-by: Tomasz Figa Reviewed-by: Linus Walleij Signed-off-by: Vinod Koul --- drivers/dma/amba-pl08x.c | 147 ++++++++++++++++++++++++++--------------------- 1 file changed, 82 insertions(+), 65 deletions(-) (limited to 'drivers/dma/amba-pl08x.c') diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index 2538e05de5bf..d3399c2c090f 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -108,19 +108,6 @@ struct vendor_data { bool nomadik; }; -/* - * PL08X private data structures - * An LLI struct - see PL08x TRM. Note that next uses bit[0] as a bus bit, - * start & end do not - their bus bit info is in cctl. Also note that these - * are fixed 32-bit quantities. - */ -struct pl08x_lli { - u32 src; - u32 dst; - u32 lli; - u32 cctl; -}; - /** * struct pl08x_bus_data - information of source or destination * busses for a transfer @@ -181,7 +168,7 @@ struct pl08x_txd { struct virt_dma_desc vd; struct list_head dsg_list; dma_addr_t llis_bus; - struct pl08x_lli *llis_va; + u32 *llis_va; /* Default cctl value for LLIs */ u32 cctl; /* @@ -265,17 +252,27 @@ struct pl08x_driver_data { struct dma_pool *pool; u8 lli_buses; u8 mem_buses; + u8 lli_words; }; /* * PL08X specific defines */ -/* Size (bytes) of each LLI buffer allocated for one transfer */ -# define PL08X_LLI_TSFR_SIZE 0x2000 +/* The order of words in an LLI. */ +#define PL080_LLI_SRC 0 +#define PL080_LLI_DST 1 +#define PL080_LLI_LLI 2 +#define PL080_LLI_CCTL 3 + +/* Total words in an LLI. */ +#define PL080_LLI_WORDS 4 -/* Maximum times we call dma_pool_alloc on this pool without freeing */ -#define MAX_NUM_TSFR_LLIS (PL08X_LLI_TSFR_SIZE/sizeof(struct pl08x_lli)) +/* + * Number of LLIs in each LLI buffer allocated for one transfer + * (maximum times we call dma_pool_alloc on this pool without freeing) + */ +#define MAX_NUM_TSFR_LLIS 512 #define PL08X_ALIGN 8 static inline struct pl08x_dma_chan *to_pl08x_chan(struct dma_chan *chan) @@ -340,6 +337,23 @@ static int pl08x_phy_channel_busy(struct pl08x_phy_chan *ch) return val & PL080_CONFIG_ACTIVE; } +static void pl08x_write_lli(struct pl08x_driver_data *pl08x, + struct pl08x_phy_chan *phychan, const u32 *lli, u32 ccfg) +{ + dev_vdbg(&pl08x->adev->dev, + "WRITE channel %d: csrc=0x%08x, cdst=0x%08x, " + "clli=0x%08x, cctl=0x%08x, ccfg=0x%08x\n", + phychan->id, lli[PL080_LLI_SRC], lli[PL080_LLI_DST], + lli[PL080_LLI_LLI], lli[PL080_LLI_CCTL], ccfg); + + writel_relaxed(lli[PL080_LLI_SRC], phychan->base + PL080_CH_SRC_ADDR); + writel_relaxed(lli[PL080_LLI_DST], phychan->base + PL080_CH_DST_ADDR); + writel_relaxed(lli[PL080_LLI_LLI], phychan->base + PL080_CH_LLI); + writel_relaxed(lli[PL080_LLI_CCTL], phychan->base + PL080_CH_CONTROL); + + writel(ccfg, phychan->reg_config); +} + /* * Set the initial DMA register values i.e. those for the first LLI * The next LLI pointer and the configuration interrupt bit have @@ -352,7 +366,6 @@ static void pl08x_start_next_txd(struct pl08x_dma_chan *plchan) struct pl08x_phy_chan *phychan = plchan->phychan; struct virt_dma_desc *vd = vchan_next_desc(&plchan->vc); struct pl08x_txd *txd = to_pl08x_txd(&vd->tx); - struct pl08x_lli *lli; u32 val; list_del(&txd->vd.node); @@ -363,19 +376,7 @@ static void pl08x_start_next_txd(struct pl08x_dma_chan *plchan) while (pl08x_phy_channel_busy(phychan)) cpu_relax(); - lli = &txd->llis_va[0]; - - dev_vdbg(&pl08x->adev->dev, - "WRITE channel %d: csrc=0x%08x, cdst=0x%08x, " - "clli=0x%08x, cctl=0x%08x, ccfg=0x%08x\n", - phychan->id, lli->src, lli->dst, lli->lli, lli->cctl, - txd->ccfg); - - writel(lli->src, phychan->base + PL080_CH_SRC_ADDR); - writel(lli->dst, phychan->base + PL080_CH_DST_ADDR); - writel(lli->lli, phychan->base + PL080_CH_LLI); - writel(lli->cctl, phychan->base + PL080_CH_CONTROL); - writel(txd->ccfg, phychan->reg_config); + pl08x_write_lli(pl08x, phychan, &txd->llis_va[0], txd->ccfg); /* Enable the DMA channel */ /* Do not access config register until channel shows as disabled */ @@ -471,12 +472,13 @@ static inline u32 get_bytes_in_cctl(u32 cctl) /* The channel should be paused when calling this */ static u32 pl08x_getbytes_chan(struct pl08x_dma_chan *plchan) { - struct pl08x_lli *llis_va; + struct pl08x_driver_data *pl08x = plchan->host; + const u32 *llis_va, *llis_va_limit; struct pl08x_phy_chan *ch; dma_addr_t llis_bus; struct pl08x_txd *txd; + u32 llis_max_words; size_t bytes; - int index; u32 clli; ch = plchan->phychan; @@ -500,22 +502,25 @@ static u32 pl08x_getbytes_chan(struct pl08x_dma_chan *plchan) llis_va = txd->llis_va; llis_bus = txd->llis_bus; + llis_max_words = pl08x->lli_words * MAX_NUM_TSFR_LLIS; BUG_ON(clli < llis_bus || clli >= llis_bus + - sizeof(struct pl08x_lli) * MAX_NUM_TSFR_LLIS); + sizeof(u32) * llis_max_words); /* * Locate the next LLI - as this is an array, * it's simple maths to find. */ - index = (clli - llis_bus) / sizeof(struct pl08x_lli); + llis_va += (clli - llis_bus) / sizeof(u32); - for (; index < MAX_NUM_TSFR_LLIS; index++) { - bytes += get_bytes_in_cctl(llis_va[index].cctl); + llis_va_limit = llis_va + llis_max_words; + + for (; llis_va < llis_va_limit; llis_va += pl08x->lli_words) { + bytes += get_bytes_in_cctl(llis_va[PL080_LLI_CCTL]); /* * A LLI pointer of 0 terminates the LLI list */ - if (!llis_va[index].lli) + if (!llis_va[PL080_LLI_LLI]) break; } @@ -771,20 +776,24 @@ static void pl08x_choose_master_bus(struct pl08x_lli_build_data *bd, /* * Fills in one LLI for a certain transfer descriptor and advance the counter */ -static void pl08x_fill_lli_for_desc(struct pl08x_lli_build_data *bd, - int num_llis, int len, u32 cctl) +static void pl08x_fill_lli_for_desc(struct pl08x_driver_data *pl08x, + struct pl08x_lli_build_data *bd, + int num_llis, int len, u32 cctl) { - struct pl08x_lli *llis_va = bd->txd->llis_va; + u32 offset = num_llis * pl08x->lli_words; + u32 *llis_va = bd->txd->llis_va + offset; dma_addr_t llis_bus = bd->txd->llis_bus; BUG_ON(num_llis >= MAX_NUM_TSFR_LLIS); - llis_va[num_llis].cctl = cctl; - llis_va[num_llis].src = bd->srcbus.addr; - llis_va[num_llis].dst = bd->dstbus.addr; - llis_va[num_llis].lli = llis_bus + (num_llis + 1) * - sizeof(struct pl08x_lli); - llis_va[num_llis].lli |= bd->lli_bus; + /* Advance the offset to next LLI. */ + offset += pl08x->lli_words; + + llis_va[PL080_LLI_SRC] = bd->srcbus.addr; + llis_va[PL080_LLI_DST] = bd->dstbus.addr; + llis_va[PL080_LLI_LLI] = (llis_bus + sizeof(u32) * offset); + llis_va[PL080_LLI_LLI] |= bd->lli_bus; + llis_va[PL080_LLI_CCTL] = cctl; if (cctl & PL080_CONTROL_SRC_INCR) bd->srcbus.addr += len; @@ -796,11 +805,12 @@ static void pl08x_fill_lli_for_desc(struct pl08x_lli_build_data *bd, bd->remainder -= len; } -static inline void prep_byte_width_lli(struct pl08x_lli_build_data *bd, - u32 *cctl, u32 len, int num_llis, size_t *total_bytes) +static inline void prep_byte_width_lli(struct pl08x_driver_data *pl08x, + struct pl08x_lli_build_data *bd, u32 *cctl, u32 len, + int num_llis, size_t *total_bytes) { *cctl = pl08x_cctl_bits(*cctl, 1, 1, len); - pl08x_fill_lli_for_desc(bd, num_llis, len, *cctl); + pl08x_fill_lli_for_desc(pl08x, bd, num_llis, len, *cctl); (*total_bytes) += len; } @@ -817,7 +827,7 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, int num_llis = 0; u32 cctl, early_bytes = 0; size_t max_bytes_per_lli, total_bytes; - struct pl08x_lli *llis_va; + u32 *llis_va, *last_lli; struct pl08x_sg *dsg; txd->llis_va = dma_pool_alloc(pl08x->pool, GFP_NOWAIT, &txd->llis_bus); @@ -904,7 +914,8 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, cctl = pl08x_cctl_bits(cctl, bd.srcbus.buswidth, bd.dstbus.buswidth, 0); - pl08x_fill_lli_for_desc(&bd, num_llis++, 0, cctl); + pl08x_fill_lli_for_desc(pl08x, &bd, num_llis++, + 0, cctl); break; } @@ -926,8 +937,8 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, dev_vdbg(&pl08x->adev->dev, "%s byte width LLIs (remain 0x%08x)\n", __func__, bd.remainder); - prep_byte_width_lli(&bd, &cctl, early_bytes, num_llis++, - &total_bytes); + prep_byte_width_lli(pl08x, &bd, &cctl, early_bytes, + num_llis++, &total_bytes); } if (bd.remainder) { @@ -983,7 +994,7 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, cctl = pl08x_cctl_bits(cctl, bd.srcbus.buswidth, bd.dstbus.buswidth, tsize); - pl08x_fill_lli_for_desc(&bd, num_llis++, + pl08x_fill_lli_for_desc(pl08x, &bd, num_llis++, lli_len, cctl); total_bytes += lli_len; } @@ -995,8 +1006,8 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, dev_vdbg(&pl08x->adev->dev, "%s align with boundary, send odd bytes (remain %zu)\n", __func__, bd.remainder); - prep_byte_width_lli(&bd, &cctl, bd.remainder, - num_llis++, &total_bytes); + prep_byte_width_lli(pl08x, &bd, &cctl, + bd.remainder, num_llis++, &total_bytes); } } @@ -1010,16 +1021,17 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, if (num_llis >= MAX_NUM_TSFR_LLIS) { dev_err(&pl08x->adev->dev, "%s need to increase MAX_NUM_TSFR_LLIS from 0x%08x\n", - __func__, (u32) MAX_NUM_TSFR_LLIS); + __func__, MAX_NUM_TSFR_LLIS); return 0; } } llis_va = txd->llis_va; + last_lli = llis_va + (num_llis - 1) * pl08x->lli_words; /* The final LLI terminates the LLI. */ - llis_va[num_llis - 1].lli = 0; + last_lli[PL080_LLI_LLI] = 0; /* The final LLI element shall also fire an interrupt. */ - llis_va[num_llis - 1].cctl |= PL080_CONTROL_TC_IRQ_EN; + last_lli[PL080_LLI_CCTL] |= PL080_CONTROL_TC_IRQ_EN; #ifdef VERBOSE_DEBUG { @@ -1031,9 +1043,10 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, for (i = 0; i < num_llis; i++) { dev_vdbg(&pl08x->adev->dev, "%3d @%p: 0x%08x 0x%08x 0x%08x 0x%08x\n", - i, &llis_va[i], llis_va[i].src, - llis_va[i].dst, llis_va[i].lli, llis_va[i].cctl - ); + i, llis_va, llis_va[PL080_LLI_SRC], + llis_va[PL080_LLI_DST], llis_va[PL080_LLI_LLI], + llis_va[PL080_LLI_CCTL]); + llis_va += pl08x->lli_words; } } #endif @@ -1853,6 +1866,7 @@ static int pl08x_probe(struct amba_device *adev, const struct amba_id *id) { struct pl08x_driver_data *pl08x; const struct vendor_data *vd = id->data; + u32 tsfr_size; int ret = 0; int i; @@ -1909,9 +1923,12 @@ static int pl08x_probe(struct amba_device *adev, const struct amba_id *id) pl08x->mem_buses = pl08x->pd->mem_buses; } + pl08x->lli_words = PL080_LLI_WORDS; + tsfr_size = MAX_NUM_TSFR_LLIS * pl08x->lli_words * sizeof(u32); + /* A DMA memory pool for LLIs, align on 1-byte boundary */ pl08x->pool = dma_pool_create(DRIVER_NAME, &pl08x->adev->dev, - PL08X_LLI_TSFR_SIZE, PL08X_ALIGN, 0); + tsfr_size, PL08X_ALIGN, 0); if (!pl08x->pool) { ret = -ENOMEM; goto out_no_lli_pool; -- cgit v1.2.3 From 48924e4224540b249e56d82e58dee5bcaabfe52b Mon Sep 17 00:00:00 2001 From: Tomasz Figa Date: Sun, 11 Aug 2013 19:59:16 +0200 Subject: dmaengine: PL08x: Move LLI dumping code into separate function This patch refactors debugging code that dumps LLI entries by moving it into separate function, which is stubbed when VERBOSE_DEBUG is not selected. This allows us to get rid of the ugly ifdef from the body of pl08x_fill_llis_for_desc(). No functional change is introduced by this patch. Signed-off-by: Tomasz Figa Reviewed-by: Linus Walleij Signed-off-by: Vinod Koul --- drivers/dma/amba-pl08x.c | 41 ++++++++++++++++++++++++----------------- 1 file changed, 24 insertions(+), 17 deletions(-) (limited to 'drivers/dma/amba-pl08x.c') diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index d3399c2c090f..1fa05d618141 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -814,6 +814,29 @@ static inline void prep_byte_width_lli(struct pl08x_driver_data *pl08x, (*total_bytes) += len; } +#ifdef VERBOSE_DEBUG +static void pl08x_dump_lli(struct pl08x_driver_data *pl08x, + const u32 *llis_va, int num_llis) +{ + int i; + + dev_vdbg(&pl08x->adev->dev, + "%-3s %-9s %-10s %-10s %-10s %s\n", + "lli", "", "csrc", "cdst", "clli", "cctl"); + for (i = 0; i < num_llis; i++) { + dev_vdbg(&pl08x->adev->dev, + "%3d @%p: 0x%08x 0x%08x 0x%08x 0x%08x\n", + i, llis_va, llis_va[PL080_LLI_SRC], + llis_va[PL080_LLI_DST], llis_va[PL080_LLI_LLI], + llis_va[PL080_LLI_CCTL]); + llis_va += pl08x->lli_words; + } +} +#else +static inline void pl08x_dump_lli(struct pl08x_driver_data *pl08x, + const u32 *llis_va, int num_llis) {} +#endif + /* * This fills in the table of LLIs for the transfer descriptor * Note that we assume we never have to change the burst sizes @@ -1033,23 +1056,7 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, /* The final LLI element shall also fire an interrupt. */ last_lli[PL080_LLI_CCTL] |= PL080_CONTROL_TC_IRQ_EN; -#ifdef VERBOSE_DEBUG - { - int i; - - dev_vdbg(&pl08x->adev->dev, - "%-3s %-9s %-10s %-10s %-10s %s\n", - "lli", "", "csrc", "cdst", "clli", "cctl"); - for (i = 0; i < num_llis; i++) { - dev_vdbg(&pl08x->adev->dev, - "%3d @%p: 0x%08x 0x%08x 0x%08x 0x%08x\n", - i, llis_va, llis_va[PL080_LLI_SRC], - llis_va[PL080_LLI_DST], llis_va[PL080_LLI_LLI], - llis_va[PL080_LLI_CCTL]); - llis_va += pl08x->lli_words; - } - } -#endif + pl08x_dump_lli(pl08x, llis_va, num_llis); return num_llis; } -- cgit v1.2.3 From da1b6c05b8b5bd9af060acb319360604a0890c2e Mon Sep 17 00:00:00 2001 From: Tomasz Figa Date: Sun, 11 Aug 2013 19:59:17 +0200 Subject: dmaengine: PL08x: Add support for PL080S variant PL080S is a modified version of PL080 that can be found on Samsung SoCs, such as S3C6400 and S3C6410. It has different offset of CONFIG register, separate CONTROL1 register that holds transfer size and larger maximum transfer size. Signed-off-by: Tomasz Figa Acked-by: Linus Walleij Signed-off-by: Vinod Koul --- drivers/dma/amba-pl08x.c | 145 ++++++++++++++++++++++++++++++++++++++--------- 1 file changed, 118 insertions(+), 27 deletions(-) (limited to 'drivers/dma/amba-pl08x.c') diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index 1fa05d618141..75915be252f5 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -24,6 +24,7 @@ * * Documentation: ARM DDI 0196G == PL080 * Documentation: ARM DDI 0218E == PL081 + * Documentation: S3C6410 User's Manual == PL080S * * PL080 & PL081 both have 16 sets of DMA signals that can be routed to any * channel. @@ -36,6 +37,14 @@ * * The PL080 has a dual bus master, PL081 has a single master. * + * PL080S is a version modified by Samsung and used in S3C64xx SoCs. + * It differs in following aspects: + * - CH_CONFIG register at different offset, + * - separate CH_CONTROL2 register for transfer size, + * - bigger maximum transfer size, + * - 8-word aligned LLI, instead of 4-word, due to extra CCTL2 word, + * - no support for peripheral flow control. + * * Memory to peripheral transfer may be visualized as * Get data from memory to DMAC * Until no data left @@ -64,10 +73,7 @@ * - Peripheral flow control: the transfer size is ignored (and should be * zero). The data is transferred from the current LLI entry, until * after the final transfer signalled by LBREQ or LSREQ. The DMAC - * will then move to the next LLI entry. - * - * Global TODO: - * - Break out common code from arch/arm/mach-s3c64xx and share + * will then move to the next LLI entry. Unsupported by PL080S. */ #include #include @@ -100,12 +106,15 @@ struct pl08x_driver_data; * @nomadik: whether the channels have Nomadik security extension bits * that need to be checked for permission before use and some registers are * missing + * @pl080s: whether this version is a PL080S, which has separate register and + * LLI word for transfer size. */ struct vendor_data { u8 config_offset; u8 channels; bool dualmaster; bool nomadik; + bool pl080s; }; /** @@ -264,9 +273,11 @@ struct pl08x_driver_data { #define PL080_LLI_DST 1 #define PL080_LLI_LLI 2 #define PL080_LLI_CCTL 3 +#define PL080S_LLI_CCTL2 4 /* Total words in an LLI. */ #define PL080_LLI_WORDS 4 +#define PL080S_LLI_WORDS 8 /* * Number of LLIs in each LLI buffer allocated for one transfer @@ -340,17 +351,29 @@ static int pl08x_phy_channel_busy(struct pl08x_phy_chan *ch) static void pl08x_write_lli(struct pl08x_driver_data *pl08x, struct pl08x_phy_chan *phychan, const u32 *lli, u32 ccfg) { - dev_vdbg(&pl08x->adev->dev, - "WRITE channel %d: csrc=0x%08x, cdst=0x%08x, " - "clli=0x%08x, cctl=0x%08x, ccfg=0x%08x\n", - phychan->id, lli[PL080_LLI_SRC], lli[PL080_LLI_DST], - lli[PL080_LLI_LLI], lli[PL080_LLI_CCTL], ccfg); + if (pl08x->vd->pl080s) + dev_vdbg(&pl08x->adev->dev, + "WRITE channel %d: csrc=0x%08x, cdst=0x%08x, " + "clli=0x%08x, cctl=0x%08x, cctl2=0x%08x, ccfg=0x%08x\n", + phychan->id, lli[PL080_LLI_SRC], lli[PL080_LLI_DST], + lli[PL080_LLI_LLI], lli[PL080_LLI_CCTL], + lli[PL080S_LLI_CCTL2], ccfg); + else + dev_vdbg(&pl08x->adev->dev, + "WRITE channel %d: csrc=0x%08x, cdst=0x%08x, " + "clli=0x%08x, cctl=0x%08x, ccfg=0x%08x\n", + phychan->id, lli[PL080_LLI_SRC], lli[PL080_LLI_DST], + lli[PL080_LLI_LLI], lli[PL080_LLI_CCTL], ccfg); writel_relaxed(lli[PL080_LLI_SRC], phychan->base + PL080_CH_SRC_ADDR); writel_relaxed(lli[PL080_LLI_DST], phychan->base + PL080_CH_DST_ADDR); writel_relaxed(lli[PL080_LLI_LLI], phychan->base + PL080_CH_LLI); writel_relaxed(lli[PL080_LLI_CCTL], phychan->base + PL080_CH_CONTROL); + if (pl08x->vd->pl080s) + writel_relaxed(lli[PL080S_LLI_CCTL2], + phychan->base + PL080S_CH_CONTROL2); + writel(ccfg, phychan->reg_config); } @@ -469,6 +492,24 @@ static inline u32 get_bytes_in_cctl(u32 cctl) return bytes; } +static inline u32 get_bytes_in_cctl_pl080s(u32 cctl, u32 cctl1) +{ + /* The source width defines the number of bytes */ + u32 bytes = cctl1 & PL080S_CONTROL_TRANSFER_SIZE_MASK; + + switch (cctl >> PL080_CONTROL_SWIDTH_SHIFT) { + case PL080_WIDTH_8BIT: + break; + case PL080_WIDTH_16BIT: + bytes *= 2; + break; + case PL080_WIDTH_32BIT: + bytes *= 4; + break; + } + return bytes; +} + /* The channel should be paused when calling this */ static u32 pl08x_getbytes_chan(struct pl08x_dma_chan *plchan) { @@ -494,7 +535,12 @@ static u32 pl08x_getbytes_chan(struct pl08x_dma_chan *plchan) clli = readl(ch->base + PL080_CH_LLI) & ~PL080_LLI_LM_AHB2; /* First get the remaining bytes in the active transfer */ - bytes = get_bytes_in_cctl(readl(ch->base + PL080_CH_CONTROL)); + if (pl08x->vd->pl080s) + bytes = get_bytes_in_cctl_pl080s( + readl(ch->base + PL080_CH_CONTROL), + readl(ch->base + PL080S_CH_CONTROL2)); + else + bytes = get_bytes_in_cctl(readl(ch->base + PL080_CH_CONTROL)); if (!clli) return bytes; @@ -515,7 +561,12 @@ static u32 pl08x_getbytes_chan(struct pl08x_dma_chan *plchan) llis_va_limit = llis_va + llis_max_words; for (; llis_va < llis_va_limit; llis_va += pl08x->lli_words) { - bytes += get_bytes_in_cctl(llis_va[PL080_LLI_CCTL]); + if (pl08x->vd->pl080s) + bytes += get_bytes_in_cctl_pl080s( + llis_va[PL080_LLI_CCTL], + llis_va[PL080S_LLI_CCTL2]); + else + bytes += get_bytes_in_cctl(llis_va[PL080_LLI_CCTL]); /* * A LLI pointer of 0 terminates the LLI list @@ -778,7 +829,7 @@ static void pl08x_choose_master_bus(struct pl08x_lli_build_data *bd, */ static void pl08x_fill_lli_for_desc(struct pl08x_driver_data *pl08x, struct pl08x_lli_build_data *bd, - int num_llis, int len, u32 cctl) + int num_llis, int len, u32 cctl, u32 cctl2) { u32 offset = num_llis * pl08x->lli_words; u32 *llis_va = bd->txd->llis_va + offset; @@ -794,6 +845,8 @@ static void pl08x_fill_lli_for_desc(struct pl08x_driver_data *pl08x, llis_va[PL080_LLI_LLI] = (llis_bus + sizeof(u32) * offset); llis_va[PL080_LLI_LLI] |= bd->lli_bus; llis_va[PL080_LLI_CCTL] = cctl; + if (pl08x->vd->pl080s) + llis_va[PL080S_LLI_CCTL2] = cctl2; if (cctl & PL080_CONTROL_SRC_INCR) bd->srcbus.addr += len; @@ -810,7 +863,7 @@ static inline void prep_byte_width_lli(struct pl08x_driver_data *pl08x, int num_llis, size_t *total_bytes) { *cctl = pl08x_cctl_bits(*cctl, 1, 1, len); - pl08x_fill_lli_for_desc(pl08x, bd, num_llis, len, *cctl); + pl08x_fill_lli_for_desc(pl08x, bd, num_llis, len, *cctl, len); (*total_bytes) += len; } @@ -820,16 +873,31 @@ static void pl08x_dump_lli(struct pl08x_driver_data *pl08x, { int i; - dev_vdbg(&pl08x->adev->dev, - "%-3s %-9s %-10s %-10s %-10s %s\n", - "lli", "", "csrc", "cdst", "clli", "cctl"); - for (i = 0; i < num_llis; i++) { + if (pl08x->vd->pl080s) { dev_vdbg(&pl08x->adev->dev, - "%3d @%p: 0x%08x 0x%08x 0x%08x 0x%08x\n", - i, llis_va, llis_va[PL080_LLI_SRC], - llis_va[PL080_LLI_DST], llis_va[PL080_LLI_LLI], - llis_va[PL080_LLI_CCTL]); - llis_va += pl08x->lli_words; + "%-3s %-9s %-10s %-10s %-10s %-10s %s\n", + "lli", "", "csrc", "cdst", "clli", "cctl", "cctl2"); + for (i = 0; i < num_llis; i++) { + dev_vdbg(&pl08x->adev->dev, + "%3d @%p: 0x%08x 0x%08x 0x%08x 0x%08x 0x%08x\n", + i, llis_va, llis_va[PL080_LLI_SRC], + llis_va[PL080_LLI_DST], llis_va[PL080_LLI_LLI], + llis_va[PL080_LLI_CCTL], + llis_va[PL080S_LLI_CCTL2]); + llis_va += pl08x->lli_words; + } + } else { + dev_vdbg(&pl08x->adev->dev, + "%-3s %-9s %-10s %-10s %-10s %s\n", + "lli", "", "csrc", "cdst", "clli", "cctl"); + for (i = 0; i < num_llis; i++) { + dev_vdbg(&pl08x->adev->dev, + "%3d @%p: 0x%08x 0x%08x 0x%08x 0x%08x\n", + i, llis_va, llis_va[PL080_LLI_SRC], + llis_va[PL080_LLI_DST], llis_va[PL080_LLI_LLI], + llis_va[PL080_LLI_CCTL]); + llis_va += pl08x->lli_words; + } } } #else @@ -938,7 +1006,7 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, cctl = pl08x_cctl_bits(cctl, bd.srcbus.buswidth, bd.dstbus.buswidth, 0); pl08x_fill_lli_for_desc(pl08x, &bd, num_llis++, - 0, cctl); + 0, cctl, 0); break; } @@ -1018,7 +1086,7 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, cctl = pl08x_cctl_bits(cctl, bd.srcbus.buswidth, bd.dstbus.buswidth, tsize); pl08x_fill_lli_for_desc(pl08x, &bd, num_llis++, - lli_len, cctl); + lli_len, cctl, tsize); total_bytes += lli_len; } @@ -1332,6 +1400,7 @@ static int dma_set_runtime_config(struct dma_chan *chan, struct dma_slave_config *config) { struct pl08x_dma_chan *plchan = to_pl08x_chan(chan); + struct pl08x_driver_data *pl08x = plchan->host; if (!plchan->slave) return -EINVAL; @@ -1341,6 +1410,13 @@ static int dma_set_runtime_config(struct dma_chan *chan, config->dst_addr_width == DMA_SLAVE_BUSWIDTH_8_BYTES) return -EINVAL; + if (config->device_fc && pl08x->vd->pl080s) { + dev_err(&pl08x->adev->dev, + "%s: PL080S does not support peripheral flow control\n", + __func__); + return -EINVAL; + } + plchan->cfg = *config; return 0; @@ -1930,7 +2006,10 @@ static int pl08x_probe(struct amba_device *adev, const struct amba_id *id) pl08x->mem_buses = pl08x->pd->mem_buses; } - pl08x->lli_words = PL080_LLI_WORDS; + if (vd->pl080s) + pl08x->lli_words = PL080S_LLI_WORDS; + else + pl08x->lli_words = PL080_LLI_WORDS; tsfr_size = MAX_NUM_TSFR_LLIS * pl08x->lli_words * sizeof(u32); /* A DMA memory pool for LLIs, align on 1-byte boundary */ @@ -2040,8 +2119,8 @@ static int pl08x_probe(struct amba_device *adev, const struct amba_id *id) amba_set_drvdata(adev, pl08x); init_pl08x_debugfs(pl08x); - dev_info(&pl08x->adev->dev, "DMA: PL%03x rev%u at 0x%08llx irq %d\n", - amba_part(adev), amba_rev(adev), + dev_info(&pl08x->adev->dev, "DMA: PL%03x%s rev%u at 0x%08llx irq %d\n", + amba_part(adev), pl08x->vd->pl080s ? "s" : "", amba_rev(adev), (unsigned long long)adev->res.start, adev->irq[0]); return 0; @@ -2082,6 +2161,12 @@ static struct vendor_data vendor_nomadik = { .nomadik = true, }; +static struct vendor_data vendor_pl080s = { + .config_offset = PL080S_CH_CONFIG, + .channels = 8, + .pl080s = true, +}; + static struct vendor_data vendor_pl081 = { .config_offset = PL080_CH_CONFIG, .channels = 2, @@ -2089,6 +2174,12 @@ static struct vendor_data vendor_pl081 = { }; static struct amba_id pl08x_ids[] = { + /* Samsung PL080S variant */ + { + .id = 0x0a141080, + .mask = 0xffffffff, + .data = &vendor_pl080s, + }, /* PL080 */ { .id = 0x00041080, -- cgit v1.2.3 From 5110e51d127221c93f331841e601612b187b60f4 Mon Sep 17 00:00:00 2001 From: Tomasz Figa Date: Sun, 11 Aug 2013 19:59:18 +0200 Subject: dmaengine: PL08x: Add support for different maximum transfer size PL080S has separate register to store transfer size in, allowing single transfer to be much larger than in standard PL080. This patch makes the amba-pl08x driver aware of this and removes writing transfer size to reserved bits of CH_CONTROL register on PL080S, which was not a problem witn transfer sizes fitting the original bitfield of PL080, but now would overwrite other fields. Signed-off-by: Tomasz Figa Reviewed-by: Linus Walleij Signed-off-by: Vinod Koul --- drivers/dma/amba-pl08x.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) (limited to 'drivers/dma/amba-pl08x.c') diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index 75915be252f5..4e4c3df7f151 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -115,6 +115,7 @@ struct vendor_data { bool dualmaster; bool nomadik; bool pl080s; + u32 max_transfer_size; }; /** @@ -783,6 +784,7 @@ static inline u32 pl08x_cctl_bits(u32 cctl, u8 srcwidth, u8 dstwidth, break; } + tsize &= PL080_CONTROL_TRANSFER_SIZE_MASK; retbits |= tsize << PL080_CONTROL_TRANSFER_SIZE_SHIFT; return retbits; } @@ -1050,7 +1052,7 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, * MIN(buswidths) */ max_bytes_per_lli = bd.srcbus.buswidth * - PL080_CONTROL_TRANSFER_SIZE_MASK; + pl08x->vd->max_transfer_size; dev_vdbg(&pl08x->adev->dev, "%s max bytes per lli = %zu\n", __func__, max_bytes_per_lli); @@ -2152,6 +2154,7 @@ static struct vendor_data vendor_pl080 = { .config_offset = PL080_CH_CONFIG, .channels = 8, .dualmaster = true, + .max_transfer_size = PL080_CONTROL_TRANSFER_SIZE_MASK, }; static struct vendor_data vendor_nomadik = { @@ -2159,18 +2162,21 @@ static struct vendor_data vendor_nomadik = { .channels = 8, .dualmaster = true, .nomadik = true, + .max_transfer_size = PL080_CONTROL_TRANSFER_SIZE_MASK, }; static struct vendor_data vendor_pl080s = { .config_offset = PL080S_CH_CONFIG, .channels = 8, .pl080s = true, + .max_transfer_size = PL080S_CONTROL_TRANSFER_SIZE_MASK, }; static struct vendor_data vendor_pl081 = { .config_offset = PL080_CH_CONFIG, .channels = 2, .dualmaster = false, + .max_transfer_size = PL080_CONTROL_TRANSFER_SIZE_MASK, }; static struct amba_id pl08x_ids[] = { -- cgit v1.2.3 From f3287a5206cae1244601d50a4d2a9a96a521c1ee Mon Sep 17 00:00:00 2001 From: Alban Bedel Date: Sun, 11 Aug 2013 19:59:19 +0200 Subject: dmaengine: PL08x: Fix reading the byte count in cctl There are more fields than just SWIDTH in CH_CONTROL register, so read register value must be masked in addition to shifting. Signed-off-by: Alban Bedel Signed-off-by: Tomasz Figa Reviewed-by: Linus Walleij Signed-off-by: Vinod Koul --- drivers/dma/amba-pl08x.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers/dma/amba-pl08x.c') diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index 4e4c3df7f151..6b9cba2fd7f1 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -480,6 +480,8 @@ static inline u32 get_bytes_in_cctl(u32 cctl) /* The source width defines the number of bytes */ u32 bytes = cctl & PL080_CONTROL_TRANSFER_SIZE_MASK; + cctl &= PL080_CONTROL_SWIDTH_MASK; + switch (cctl >> PL080_CONTROL_SWIDTH_SHIFT) { case PL080_WIDTH_8BIT: break; @@ -498,6 +500,8 @@ static inline u32 get_bytes_in_cctl_pl080s(u32 cctl, u32 cctl1) /* The source width defines the number of bytes */ u32 bytes = cctl1 & PL080S_CONTROL_TRANSFER_SIZE_MASK; + cctl &= PL080_CONTROL_SWIDTH_MASK; + switch (cctl >> PL080_CONTROL_SWIDTH_SHIFT) { case PL080_WIDTH_8BIT: break; -- cgit v1.2.3 From 3b24c20b208aa493c488835f5b9e722c88756845 Mon Sep 17 00:00:00 2001 From: Alban Bedel Date: Sun, 11 Aug 2013 19:59:20 +0200 Subject: dmaengine: PL08x: Add cyclic transfer support Many audio interface drivers require support of cyclic transfers to work correctly, for example Samsung ASoC DMA driver. This patch adds support for cyclic transfers to the amba-pl08x driver. Signed-off-by: Alban Bedel [tfiga: Rebase and slightly beautify the original patch.] Signed-off-by: Tomasz Figa Acked-by: Linus Walleij Signed-off-by: Vinod Koul --- drivers/dma/amba-pl08x.c | 147 +++++++++++++++++++++++++++++++++++++---------- 1 file changed, 118 insertions(+), 29 deletions(-) (limited to 'drivers/dma/amba-pl08x.c') diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index 6b9cba2fd7f1..cd294340c851 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -173,6 +173,7 @@ struct pl08x_sg { * @ccfg: config reg values for current txd * @done: this marks completed descriptors, which should not have their * mux released. + * @cyclic: indicate cyclic transfers */ struct pl08x_txd { struct virt_dma_desc vd; @@ -187,6 +188,7 @@ struct pl08x_txd { */ u32 ccfg; bool done; + bool cyclic; }; /** @@ -574,9 +576,9 @@ static u32 pl08x_getbytes_chan(struct pl08x_dma_chan *plchan) bytes += get_bytes_in_cctl(llis_va[PL080_LLI_CCTL]); /* - * A LLI pointer of 0 terminates the LLI list + * A LLI pointer going backward terminates the LLI list */ - if (!llis_va[PL080_LLI_LLI]) + if (llis_va[PL080_LLI_LLI] <= clli) break; } @@ -1125,10 +1127,16 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, llis_va = txd->llis_va; last_lli = llis_va + (num_llis - 1) * pl08x->lli_words; - /* The final LLI terminates the LLI. */ - last_lli[PL080_LLI_LLI] = 0; - /* The final LLI element shall also fire an interrupt. */ - last_lli[PL080_LLI_CCTL] |= PL080_CONTROL_TC_IRQ_EN; + + if (txd->cyclic) { + /* Link back to the first LLI. */ + last_lli[PL080_LLI_LLI] = txd->llis_bus | bd.lli_bus; + } else { + /* The final LLI terminates the LLI. */ + last_lli[PL080_LLI_LLI] = 0; + /* The final LLI element shall also fire an interrupt. */ + last_lli[PL080_LLI_CCTL] |= PL080_CONTROL_TC_IRQ_EN; + } pl08x_dump_lli(pl08x, llis_va, num_llis); @@ -1513,25 +1521,19 @@ static struct dma_async_tx_descriptor *pl08x_prep_dma_memcpy( return vchan_tx_prep(&plchan->vc, &txd->vd, flags); } -static struct dma_async_tx_descriptor *pl08x_prep_slave_sg( - struct dma_chan *chan, struct scatterlist *sgl, - unsigned int sg_len, enum dma_transfer_direction direction, - unsigned long flags, void *context) +static struct pl08x_txd *pl08x_init_txd( + struct dma_chan *chan, + enum dma_transfer_direction direction, + dma_addr_t *slave_addr) { struct pl08x_dma_chan *plchan = to_pl08x_chan(chan); struct pl08x_driver_data *pl08x = plchan->host; struct pl08x_txd *txd; - struct pl08x_sg *dsg; - struct scatterlist *sg; enum dma_slave_buswidth addr_width; - dma_addr_t slave_addr; int ret, tmp; u8 src_buses, dst_buses; u32 maxburst, cctl; - dev_dbg(&pl08x->adev->dev, "%s prepare transaction of %d bytes from %s\n", - __func__, sg_dma_len(sgl), plchan->name); - txd = pl08x_get_txd(plchan); if (!txd) { dev_err(&pl08x->adev->dev, "%s no txd\n", __func__); @@ -1545,14 +1547,14 @@ static struct dma_async_tx_descriptor *pl08x_prep_slave_sg( */ if (direction == DMA_MEM_TO_DEV) { cctl = PL080_CONTROL_SRC_INCR; - slave_addr = plchan->cfg.dst_addr; + *slave_addr = plchan->cfg.dst_addr; addr_width = plchan->cfg.dst_addr_width; maxburst = plchan->cfg.dst_maxburst; src_buses = pl08x->mem_buses; dst_buses = plchan->cd->periph_buses; } else if (direction == DMA_DEV_TO_MEM) { cctl = PL080_CONTROL_DST_INCR; - slave_addr = plchan->cfg.src_addr; + *slave_addr = plchan->cfg.src_addr; addr_width = plchan->cfg.src_addr_width; maxburst = plchan->cfg.src_maxburst; src_buses = plchan->cd->periph_buses; @@ -1601,24 +1603,107 @@ static struct dma_async_tx_descriptor *pl08x_prep_slave_sg( else txd->ccfg |= plchan->signal << PL080_CONFIG_SRC_SEL_SHIFT; + return txd; +} + +static int pl08x_tx_add_sg(struct pl08x_txd *txd, + enum dma_transfer_direction direction, + dma_addr_t slave_addr, + dma_addr_t buf_addr, + unsigned int len) +{ + struct pl08x_sg *dsg; + + dsg = kzalloc(sizeof(struct pl08x_sg), GFP_NOWAIT); + if (!dsg) + return -ENOMEM; + + list_add_tail(&dsg->node, &txd->dsg_list); + + dsg->len = len; + if (direction == DMA_MEM_TO_DEV) { + dsg->src_addr = buf_addr; + dsg->dst_addr = slave_addr; + } else { + dsg->src_addr = slave_addr; + dsg->dst_addr = buf_addr; + } + + return 0; +} + +static struct dma_async_tx_descriptor *pl08x_prep_slave_sg( + struct dma_chan *chan, struct scatterlist *sgl, + unsigned int sg_len, enum dma_transfer_direction direction, + unsigned long flags, void *context) +{ + struct pl08x_dma_chan *plchan = to_pl08x_chan(chan); + struct pl08x_driver_data *pl08x = plchan->host; + struct pl08x_txd *txd; + struct scatterlist *sg; + int ret, tmp; + dma_addr_t slave_addr; + + dev_dbg(&pl08x->adev->dev, "%s prepare transaction of %d bytes from %s\n", + __func__, sg_dma_len(sgl), plchan->name); + + txd = pl08x_init_txd(chan, direction, &slave_addr); + if (!txd) + return NULL; + for_each_sg(sgl, sg, sg_len, tmp) { - dsg = kzalloc(sizeof(struct pl08x_sg), GFP_NOWAIT); - if (!dsg) { + ret = pl08x_tx_add_sg(txd, direction, slave_addr, + sg_dma_address(sg), + sg_dma_len(sg)); + if (ret) { pl08x_release_mux(plchan); pl08x_free_txd(pl08x, txd); dev_err(&pl08x->adev->dev, "%s no mem for pl080 sg\n", __func__); return NULL; } - list_add_tail(&dsg->node, &txd->dsg_list); + } - dsg->len = sg_dma_len(sg); - if (direction == DMA_MEM_TO_DEV) { - dsg->src_addr = sg_dma_address(sg); - dsg->dst_addr = slave_addr; - } else { - dsg->src_addr = slave_addr; - dsg->dst_addr = sg_dma_address(sg); + ret = pl08x_fill_llis_for_desc(plchan->host, txd); + if (!ret) { + pl08x_release_mux(plchan); + pl08x_free_txd(pl08x, txd); + return NULL; + } + + return vchan_tx_prep(&plchan->vc, &txd->vd, flags); +} + +static struct dma_async_tx_descriptor *pl08x_prep_dma_cyclic( + struct dma_chan *chan, dma_addr_t buf_addr, size_t buf_len, + size_t period_len, enum dma_transfer_direction direction, + unsigned long flags, void *context) +{ + struct pl08x_dma_chan *plchan = to_pl08x_chan(chan); + struct pl08x_driver_data *pl08x = plchan->host; + struct pl08x_txd *txd; + int ret, tmp; + dma_addr_t slave_addr; + + dev_dbg(&pl08x->adev->dev, + "%s prepare cyclic transaction of %d/%d bytes %s %s\n", + __func__, period_len, buf_len, + direction == DMA_MEM_TO_DEV ? "to" : "from", + plchan->name); + + txd = pl08x_init_txd(chan, direction, &slave_addr); + if (!txd) + return NULL; + + txd->cyclic = true; + txd->cctl |= PL080_CONTROL_TC_IRQ_EN; + for (tmp = 0; tmp < buf_len; tmp += period_len) { + ret = pl08x_tx_add_sg(txd, direction, slave_addr, + buf_addr + tmp, period_len); + if (ret) { + pl08x_release_mux(plchan); + pl08x_free_txd(pl08x, txd); + return NULL; } } @@ -1761,7 +1846,9 @@ static irqreturn_t pl08x_irq(int irq, void *dev) spin_lock(&plchan->vc.lock); tx = plchan->at; - if (tx) { + if (tx && tx->cyclic) { + vchan_cyclic_callback(&tx->vd); + } else if (tx) { plchan->at = NULL; /* * This descriptor is done, release its mux @@ -1983,6 +2070,7 @@ static int pl08x_probe(struct amba_device *adev, const struct amba_id *id) /* Initialize slave engine */ dma_cap_set(DMA_SLAVE, pl08x->slave.cap_mask); + dma_cap_set(DMA_CYCLIC, pl08x->slave.cap_mask); pl08x->slave.dev = &adev->dev; pl08x->slave.device_alloc_chan_resources = pl08x_alloc_chan_resources; pl08x->slave.device_free_chan_resources = pl08x_free_chan_resources; @@ -1990,6 +2078,7 @@ static int pl08x_probe(struct amba_device *adev, const struct amba_id *id) pl08x->slave.device_tx_status = pl08x_dma_tx_status; pl08x->slave.device_issue_pending = pl08x_issue_pending; pl08x->slave.device_prep_slave_sg = pl08x_prep_slave_sg; + pl08x->slave.device_prep_dma_cyclic = pl08x_prep_dma_cyclic; pl08x->slave.device_control = pl08x_control; /* Get the platform data */ -- cgit v1.2.3