From 79d6205a3f741c9fb89cfc47dfa0eddb1526726d Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Fri, 9 Dec 2016 09:47:19 -0200 Subject: [media] v4l: tvp5150: Don't override output pinmuxing at stream on/off time The s_stream() handler incorrectly writes the whole MISC_CTL register to enable or disable the outputs, overriding the output pinmuxing configuration. Fix it to only touch the output enable bits. The CONF_SHARED_PIN register is also written by the same function, resulting in muxing the INTREQ signal instead of the VBLK/GPCL signal on the INTREQ/GPCL/VBLK pin. As the driver doesn't support interrupts this is obviously incorrect, and breaks operation on other devices. Fix it by removing the write. Cc: stable@vger.kernel.org # For Kernel 4.5 and upper Signed-off-by: Laurent Pinchart Signed-off-by: Mauro Carvalho Chehab --- drivers/media/i2c/tvp5150.c | 33 +++++++++++++++++++-------------- 1 file changed, 19 insertions(+), 14 deletions(-) (limited to 'drivers/media') diff --git a/drivers/media/i2c/tvp5150.c b/drivers/media/i2c/tvp5150.c index 8852fa8c957b..48646a7f3fb0 100644 --- a/drivers/media/i2c/tvp5150.c +++ b/drivers/media/i2c/tvp5150.c @@ -1058,22 +1058,27 @@ static const struct media_entity_operations tvp5150_sd_media_ops = { static int tvp5150_s_stream(struct v4l2_subdev *sd, int enable) { struct tvp5150 *decoder = to_tvp5150(sd); - /* Output format: 8-bit ITU-R BT.656 with embedded syncs */ - int val = TVP5150_MISC_CTL_YCBCR_OE | TVP5150_MISC_CTL_CLOCK_OE; - - /* Output format: 8-bit 4:2:2 YUV with discrete sync */ - if (decoder->mbus_type == V4L2_MBUS_PARALLEL) - val = TVP5150_MISC_CTL_YCBCR_OE | TVP5150_MISC_CTL_SYNC_OE - | TVP5150_MISC_CTL_CLOCK_OE; + int val; - /* Initializes TVP5150 to its default values */ - /* # set PCLK (27MHz) */ - tvp5150_write(sd, TVP5150_CONF_SHARED_PIN, 0x00); + /* Enable or disable the video output signals. */ + val = tvp5150_read(sd, TVP5150_MISC_CTL); + if (val < 0) + return val; + + val &= ~(TVP5150_MISC_CTL_YCBCR_OE | TVP5150_MISC_CTL_SYNC_OE | + TVP5150_MISC_CTL_CLOCK_OE); + + if (enable) { + /* + * Enable the YCbCr and clock outputs. In discrete sync mode + * (non-BT.656) additionally enable the the sync outputs. + */ + val |= TVP5150_MISC_CTL_YCBCR_OE | TVP5150_MISC_CTL_CLOCK_OE; + if (decoder->mbus_type == V4L2_MBUS_PARALLEL) + val |= TVP5150_MISC_CTL_SYNC_OE; + } - if (enable) - tvp5150_write(sd, TVP5150_MISC_CTL, val); - else - tvp5150_write(sd, TVP5150_MISC_CTL, 0x00); + tvp5150_write(sd, TVP5150_MISC_CTL, val); return 0; } -- cgit v1.2.3