// SPDX-License-Identifier: GPL-2.0-only /* * Clause 45 PHY support */ #include #include #include #include #include #include "mdio-open-alliance.h" /** * genphy_c45_baset1_able - checks if the PMA has BASE-T1 extended abilities * @phydev: target phy_device struct */ static bool genphy_c45_baset1_able(struct phy_device *phydev) { int val; if (phydev->pma_extable == -ENODATA) { val = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_PMA_EXTABLE); if (val < 0) return false; phydev->pma_extable = val; } return !!(phydev->pma_extable & MDIO_PMA_EXTABLE_BT1); } /** * genphy_c45_pma_can_sleep - checks if the PMA have sleep support * @phydev: target phy_device struct */ static bool genphy_c45_pma_can_sleep(struct phy_device *phydev) { int stat1; stat1 = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_STAT1); if (stat1 < 0) return false; return !!(stat1 & MDIO_STAT1_LPOWERABLE); } /** * genphy_c45_pma_resume - wakes up the PMA module * @phydev: target phy_device struct */ int genphy_c45_pma_resume(struct phy_device *phydev) { if (!genphy_c45_pma_can_sleep(phydev)) return -EOPNOTSUPP; return phy_clear_bits_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_CTRL1, MDIO_CTRL1_LPOWER); } EXPORT_SYMBOL_GPL(genphy_c45_pma_resume); /** * genphy_c45_pma_suspend - suspends the PMA module * @phydev: target phy_device struct */ int genphy_c45_pma_suspend(struct phy_device *phydev) { if (!genphy_c45_pma_can_sleep(phydev)) return -EOPNOTSUPP; return phy_set_bits_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_CTRL1, MDIO_CTRL1_LPOWER); } EXPORT_SYMBOL_GPL(genphy_c45_pma_suspend); /** * genphy_c45_pma_baset1_setup_master_slave - configures forced master/slave * role of BaseT1 devices. * @phydev: target phy_device struct */ int genphy_c45_pma_baset1_setup_master_slave(struct phy_device *phydev) { int ctl = 0; switch (phydev->master_slave_set) { case MASTER_SLAVE_CFG_MASTER_PREFERRED: case MASTER_SLAVE_CFG_MASTER_FORCE: ctl = MDIO_PMA_PMD_BT1_CTRL_CFG_MST; break; case MASTER_SLAVE_CFG_SLAVE_FORCE: case MASTER_SLAVE_CFG_SLAVE_PREFERRED: break; case MASTER_SLAVE_CFG_UNKNOWN: case MASTER_SLAVE_CFG_UNSUPPORTED: return 0; default: phydev_warn(phydev, "Unsupported Master/Slave mode\n"); return -EOPNOTSUPP; } return phy_modify_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_PMA_PMD_BT1_CTRL, MDIO_PMA_PMD_BT1_CTRL_CFG_MST, ctl); } EXPORT_SYMBOL_GPL(genphy_c45_pma_baset1_setup_master_slave); /** * genphy_c45_pma_setup_forced - configures a forced speed * @phydev: target phy_device struct */ int genphy_c45_pma_setup_forced(struct phy_device *phydev) { int bt1_ctrl, ctrl1, ctrl2, ret; /* Half duplex is not supported */ if (phydev->duplex != DUPLEX_FULL) return -EINVAL; ctrl1 = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_CTRL1); if (ctrl1 < 0) return ctrl1; ctrl2 = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_CTRL2); if (ctrl2 < 0) return ctrl2; ctrl1 &= ~MDIO_CTRL1_SPEEDSEL; /* * PMA/PMD type selection is 1.7.5:0 not 1.7.3:0. See 45.2.1.6.1 * in 802.3-2012 and 802.3-2015. */ ctrl2 &= ~(MDIO_PMA_CTRL2_TYPE | 0x30); switch (phydev->speed) { case SPEED_10: if (genphy_c45_baset1_able(phydev)) ctrl2 |= MDIO_PMA_CTRL2_BASET1; else ctrl2 |= MDIO_PMA_CTRL2_10BT; break; case SPEED_100: ctrl1 |= MDIO_PMA_CTRL1_SPEED100; ctrl2 |= MDIO_PMA_CTRL2_100BTX; break; case SPEED_1000: ctrl1 |= MDIO_PMA_CTRL1_SPEED1000; /* Assume 1000base-T */ ctrl2 |= MDIO_PMA_CTRL2_1000BT; break; case SPEED_2500: ctrl1 |= MDIO_CTRL1_SPEED2_5G; /* Assume 2.5Gbase-T */ ctrl2 |= MDIO_PMA_CTRL2_2_5GBT; break; case SPEED_5000: ctrl1 |= MDIO_CTRL1_SPEED5G; /* Assume 5Gbase-T */ ctrl2 |= MDIO_PMA_CTRL2_5GBT; break; case SPEED_10000: ctrl1 |= MDIO_CTRL1_SPEED10G; /* Assume 10Gbase-T */ ctrl2 |= MDIO_PMA_CTRL2_10GBT; break; default: return -EINVAL; } ret = phy_write_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_CTRL1, ctrl1); if (ret < 0) return ret; ret = phy_write_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_CTRL2, ctrl2); if (ret < 0) return ret; if (genphy_c45_baset1_able(phydev)) { ret = genphy_c45_pma_baset1_setup_master_slave(phydev); if (ret < 0) return ret; bt1_ctrl = 0; if (phydev->speed == SPEED_1000) bt1_ctrl = MDIO_PMA_PMD_BT1_CTRL_STRAP_B1000; ret = phy_modify_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_PMA_PMD_BT1_CTRL, MDIO_PMA_PMD_BT1_CTRL_STRAP, bt1_ctrl); if (ret < 0) return ret; } return genphy_c45_an_disable_aneg(phydev); } EXPORT_SYMBOL_GPL(genphy_c45_pma_setup_forced); /* Sets master/slave preference and supported technologies. * The preference is set in the BIT(4) of BASE-T1 AN * advertisement register 7.515 and whether the status * is forced or not, it is set in the BIT(12) of BASE-T1 * AN advertisement register 7.514. * Sets 10BASE-T1L Ability BIT(14) in BASE-T1 autonegotiation * advertisement register [31:16] if supported. */ static int genphy_c45_baset1_an_config_aneg(struct phy_device *phydev) { u16 adv_l_mask, adv_l = 0; u16 adv_m_mask, adv_m = 0; int changed = 0; int ret; adv_l_mask = MDIO_AN_T1_ADV_L_FORCE_MS | MDIO_AN_T1_ADV_L_PAUSE_CAP | MDIO_AN_T1_ADV_L_PAUSE_ASYM; adv_m_mask = MDIO_AN_T1_ADV_M_MST | MDIO_AN_T1_ADV_M_B10L; switch (phydev->master_slave_set) { case MASTER_SLAVE_CFG_MASTER_FORCE: adv_m |= MDIO_AN_T1_ADV_M_MST; fallthrough; case MASTER_SLAVE_CFG_SLAVE_FORCE: adv_l |= MDIO_AN_T1_ADV_L_FORCE_MS; break; case MASTER_SLAVE_CFG_MASTER_PREFERRED: adv_m |= MDIO_AN_T1_ADV_M_MST; fallthrough; case MASTER_SLAVE_CFG_SLAVE_PREFERRED: break; case MASTER_SLAVE_CFG_UNKNOWN: case MASTER_SLAVE_CFG_UNSUPPORTED: /* if master/slave role is not specified, do not overwrite it */ adv_l_mask &= ~MDIO_AN_T1_ADV_L_FORCE_MS; adv_m_mask &= ~MDIO_AN_T1_ADV_M_MST; break; default: phydev_warn(phydev, "Unsupported Master/Slave mode\n"); return -EOPNOTSUPP; } adv_l |= linkmode_adv_to_mii_t1_adv_l_t(phydev->advertising); ret = phy_modify_mmd_changed(phydev, MDIO_MMD_AN, MDIO_AN_T1_ADV_L, adv_l_mask, adv_l); if (ret < 0) return ret; if (ret > 0) changed = 1; adv_m |= linkmode_adv_to_mii_t1_adv_m_t(phydev->advertising); ret = phy_modify_mmd_changed(phydev, MDIO_MMD_AN, MDIO_AN_T1_ADV_M, adv_m_mask, adv_m); if (ret < 0) return ret; if (ret > 0) changed = 1; return changed; } /** * genphy_c45_an_config_aneg - configure advertisement registers * @phydev: target phy_device struct * * Configure advertisement registers based on modes set in phydev->advertising * * Returns negative errno code on failure, 0 if advertisement didn't change, * or 1 if advertised modes changed. */ int genphy_c45_an_config_aneg(struct phy_device *phydev) { int changed = 0, ret; u32 adv; linkmode_and(phydev->advertising, phydev->advertising, phydev->supported); ret = genphy_c45_an_config_eee_aneg(phydev); if (ret < 0) return ret; else if (ret) changed = true; if (genphy_c45_baset1_able(phydev)) return genphy_c45_baset1_an_config_aneg(phydev); adv = linkmode_adv_to_mii_adv_t(phydev->advertising); ret = phy_modify_mmd_changed(phydev, MDIO_MMD_AN, MDIO_AN_ADVERTISE, ADVERTISE_ALL | ADVERTISE_100BASE4 | ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM, adv); if (ret < 0) return ret; if (ret > 0) changed = 1; adv = linkmode_adv_to_mii_10gbt_adv_t(phydev->advertising); ret = phy_modify_mmd_changed(phydev, MDIO_MMD_AN, MDIO_AN_10GBT_CTRL, MDIO_AN_10GBT_CTRL_ADV10G | MDIO_AN_10GBT_CTRL_ADV5G | MDIO_AN_10GBT_CTRL_ADV2_5G, adv); if (ret < 0) return ret; if (ret > 0) changed = 1; return changed; } EXPORT_SYMBOL_GPL(genphy_c45_an_config_aneg); /** * genphy_c45_an_disable_aneg - disable auto-negotiation * @phydev: target phy_device struct * * Disable auto-negotiation in the Clause 45 PHY. The link parameters * are controlled through the PMA/PMD MMD registers. * * Returns zero on success, negative errno code on failure. */ int genphy_c45_an_disable_aneg(struct phy_device *phydev) { u16 reg = MDIO_CTRL1; if (genphy_c45_baset1_able(phydev)) reg = MDIO_AN_T1_CTRL; return phy_clear_bits_mmd(phydev, MDIO_MMD_AN, reg, MDIO_AN_CTRL1_ENABLE | MDIO_AN_CTRL1_RESTART); } EXPORT_SYMBOL_GPL(genphy_c45_an_disable_aneg); /** * genphy_c45_restart_aneg - Enable and restart auto-negotiation * @phydev: target phy_device struct * * This assumes that the auto-negotiation MMD is present. * * Enable and restart auto-negotiation. */ int genphy_c45_restart_aneg(struct phy_device *phydev) { u16 reg = MDIO_CTRL1; if (genphy_c45_baset1_able(phydev)) reg = MDIO_AN_T1_CTRL; return phy_set_bits_mmd(phydev, MDIO_MMD_AN, reg, MDIO_AN_CTRL1_ENABLE | MDIO_AN_CTRL1_RESTART); } EXPORT_SYMBOL_GPL(genphy_c45_restart_aneg); /** * genphy_c45_check_and_restart_aneg - Enable and restart auto-negotiation * @phydev: target phy_device struct * @restart: whether aneg restart is requested * * This assumes that the auto-negotiation MMD is present. * * Check, and restart auto-negotiation if needed. */ int genphy_c45_check_and_restart_aneg(struct phy_device *phydev, bool restart) { u16 reg = MDIO_CTRL1; int ret; if (genphy_c45_baset1_able(phydev)) reg = MDIO_AN_T1_CTRL; if (!restart) { /* Configure and restart aneg if it wasn't set before */ ret = phy_read_mmd(phydev, MDIO_MMD_AN, reg); if (ret < 0) return ret; if (!(ret & MDIO_AN_CTRL1_ENABLE)) restart = true; } if (restart) return genphy_c45_restart_aneg(phydev); return 0; } EXPORT_SYMBOL_GPL(genphy_c45_check_and_restart_aneg); /** * genphy_c45_aneg_done - return auto-negotiation complete status * @phydev: target phy_device struct * * This assumes that the auto-negotiation MMD is present. * * Reads the status register from the auto-negotiation MMD, returning: * - positive if auto-negotiation is complete * - negative errno code on error * - zero otherwise */ int genphy_c45_aneg_done(struct phy_device *phydev) { int reg = MDIO_STAT1; int val; if (genphy_c45_baset1_able(phydev)) reg = MDIO_AN_T1_STAT; val = phy_read_mmd(phydev, MDIO_MMD_AN, reg); return val < 0 ? val : val & MDIO_AN_STAT1_COMPLETE ? 1 : 0; } EXPORT_SYMBOL_GPL(genphy_c45_aneg_done); /** * genphy_c45_read_link - read the overall link status from the MMDs * @phydev: target phy_device struct * * Read the link status from the specified MMDs, and if they all indicate * that the link is up, set phydev->link to 1. If an error is encountered, * a negative errno will be returned, otherwise zero. */ int genphy_c45_read_link(struct phy_device *phydev) { u32 mmd_mask = MDIO_DEVS_PMAPMD; int val, devad; bool link = true; if (phydev->c45_ids.mmds_present & MDIO_DEVS_AN) { val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_CTRL1); if (val < 0) return val; /* Autoneg is being started, therefore disregard current * link status and report link as down. */ if (val & MDIO_AN_CTRL1_RESTART) { phydev->link = 0; return 0; } } while (mmd_mask && link) { devad = __ffs(mmd_mask); mmd_mask &= ~BIT(devad); /* The link state is latched low so that momentary link * drops can be detected. Do not double-read the status * in polling mode to detect such short link drops except * the link was already down. */ if (!phy_polling_mode(phydev) || !phydev->link) { val = phy_read_mmd(phydev, devad, MDIO_STAT1); if (val < 0) return val; else if (val & MDIO_STAT1_LSTATUS) continue; } val = phy_read_mmd(phydev, devad, MDIO_STAT1); if (val < 0) return val; if (!(val & MDIO_STAT1_LSTATUS)) link = false; } phydev->link = link; return 0; } EXPORT_SYMBOL_GPL(genphy_c45_read_link); /* Read the Clause 45 defined BASE-T1 AN (7.513) status register to check * if autoneg is complete. If so read the BASE-T1 Autonegotiation * Advertisement registers filling in the link partner advertisement, * pause and asym_pause members in phydev. */ static int genphy_c45_baset1_read_lpa(struct phy_device *phydev) { int val; val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_T1_STAT); if (val < 0) return val; if (!(val & MDIO_AN_STAT1_COMPLETE)) { linkmode_clear_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, phydev->lp_advertising); mii_t1_adv_l_mod_linkmode_t(phydev->lp_advertising, 0); mii_t1_adv_m_mod_linkmode_t(phydev->lp_advertising, 0); phydev->pause = 0; phydev->asym_pause = 0; return 0; } linkmode_mod_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, phydev->lp_advertising, 1); val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_T1_LP_L); if (val < 0) return val; mii_t1_adv_l_mod_linkmode_t(phydev->lp_advertising, val); phydev->pause = val & MDIO_AN_T1_ADV_L_PAUSE_CAP ? 1 : 0; phydev->asym_pause = val & MDIO_AN_T1_ADV_L_PAUSE_ASYM ? 1 : 0; val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_T1_LP_M); if (val < 0) return val; mii_t1_adv_m_mod_linkmode_t(phydev->lp_advertising, val); return 0; } /** * genphy_c45_read_lpa - read the link partner advertisement and pause * @phydev: target phy_device struct * * Read the Clause 45 defined base (7.19) and 10G (7.33) status registers, * filling in the link partner advertisement, pause and asym_pause members * in @phydev. This assumes that the auto-negotiation MMD is present, and * the backplane bit (7.48.0) is clear. Clause 45 PHY drivers are expected * to fill in the remainder of the link partner advert from vendor registers. */ int genphy_c45_read_lpa(struct phy_device *phydev) { int val; if (genphy_c45_baset1_able(phydev)) return genphy_c45_baset1_read_lpa(phydev); val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_STAT1); if (val < 0) return val; if (!(val & MDIO_AN_STAT1_COMPLETE)) { linkmode_clear_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, phydev->lp_advertising); mii_10gbt_stat_mod_linkmode_lpa_t(phydev->lp_advertising, 0); mii_adv_mod_linkmode_adv_t(phydev->lp_advertising, 0); phydev->pause = 0; phydev->asym_pause = 0; return 0; } linkmode_mod_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, phydev->lp_advertising, val & MDIO_AN_STAT1_LPABLE); /* Read the link partner's base page advertisement */ val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_LPA); if (val < 0) return val; mii_adv_mod_linkmode_adv_t(phydev->lp_advertising, val); phydev->pause = val & LPA_PAUSE_CAP ? 1 : 0; phydev->asym_pause = val & LPA_PAUSE_ASYM ? 1 : 0; /* Read the link partner's 10G advertisement */ val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_10GBT_STAT); if (val < 0) return val; mii_10gbt_stat_mod_linkmode_lpa_t(phydev->lp_advertising, val); return 0; } EXPORT_SYMBOL_GPL(genphy_c45_read_lpa); /** * genphy_c45_pma_baset1_read_master_slave - read forced master/slave * configuration * @phydev: target phy_device struct */ int genphy_c45_pma_baset1_read_master_slave(struct phy_device *phydev) { int val; phydev->master_slave_state = MASTER_SLAVE_STATE_UNKNOWN; phydev->master_slave_get = MASTER_SLAVE_CFG_UNKNOWN; val = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_PMA_PMD_BT1_CTRL); if (val < 0) return val; if (val & MDIO_PMA_PMD_BT1_CTRL_CFG_MST) { phydev->master_slave_get = MASTER_SLAVE_CFG_MASTER_FORCE; phydev->master_slave_state = MASTER_SLAVE_STATE_MASTER; } else { phydev->master_slave_get = MASTER_SLAVE_CFG_SLAVE_FORCE; phydev->master_slave_state = MASTER_SLAVE_STATE_SLAVE; } return 0; } EXPORT_SYMBOL_GPL(genphy_c45_pma_baset1_read_master_slave); /** * genphy_c45_read_pma - read link speed etc from PMA * @phydev: target phy_device struct */ int genphy_c45_read_pma(struct phy_device *phydev) { int val; linkmode_zero(phydev->lp_advertising); val = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_CTRL1); if (val < 0) return val; switch (val & MDIO_CTRL1_SPEEDSEL) { case 0: phydev->speed = SPEED_10; break; case MDIO_PMA_CTRL1_SPEED100: phydev->speed = SPEED_100; break; case MDIO_PMA_CTRL1_SPEED1000: phydev->speed = SPEED_1000; break; case MDIO_CTRL1_SPEED2_5G: phydev->speed = SPEED_2500; break; case MDIO_CTRL1_SPEED5G: phydev->speed = SPEED_5000; break; case MDIO_CTRL1_SPEED10G: phydev->speed = SPEED_10000; break; default: phydev->speed = SPEED_UNKNOWN; break; } phydev->duplex = DUPLEX_FULL; if (genphy_c45_baset1_able(phydev)) { val = genphy_c45_pma_baset1_read_master_slave(phydev); if (val < 0) return val; } return 0; } EXPORT_SYMBOL_GPL(genphy_c45_read_pma); /** * genphy_c45_read_mdix - read mdix status from PMA * @phydev: target phy_device struct */ int genphy_c45_read_mdix(struct phy_device *phydev) { int val; if (phydev->speed == SPEED_10000) { val = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_PMA_10GBT_SWAPPOL); if (val < 0) return val; switch (val) { case MDIO_PMA_10GBT_SWAPPOL_ABNX | MDIO_PMA_10GBT_SWAPPOL_CDNX: phydev->mdix = ETH_TP_MDI; break; case 0: phydev->mdix = ETH_TP_MDI_X; break; default: phydev->mdix = ETH_TP_MDI_INVALID; break; } } return 0; } EXPORT_SYMBOL_GPL(genphy_c45_read_mdix); /** * genphy_c45_write_eee_adv - write advertised EEE link modes * @phydev: target phy_device struct * @adv: the linkmode advertisement settings */ int genphy_c45_write_eee_adv(struct phy_device *phydev, unsigned long *adv) { int val, changed = 0; if (linkmode_intersects(phydev->supported_eee, PHY_EEE_CAP1_FEATURES)) { val = linkmode_to_mii_eee_cap1_t(adv); /* In eee_broken_modes are stored MDIO_AN_EEE_ADV specific raw * register values. */ val &= ~phydev->eee_broken_modes; /* IEEE 802.3-2018 45.2.7.13 EEE advertisement 1 * (Register 7.60) */ val = phy_modify_mmd_changed(phydev, MDIO_MMD_AN, MDIO_AN_EEE_ADV, MDIO_EEE_100TX | MDIO_EEE_1000T | MDIO_EEE_10GT | MDIO_EEE_1000KX | MDIO_EEE_10GKX4 | MDIO_EEE_10GKR, val); if (val < 0) return val; if (val > 0) changed = 1; } if (linkmode_test_bit(ETHTOOL_LINK_MODE_10baseT1L_Full_BIT, phydev->supported_eee)) { val = linkmode_adv_to_mii_10base_t1_t(adv); /* IEEE 802.3cg-2019 45.2.7.25 10BASE-T1 AN control register * (Register 7.526) */ val = phy_modify_mmd_changed(phydev, MDIO_MMD_AN, MDIO_AN_10BT1_AN_CTRL, MDIO_AN_10BT1_AN_CTRL_ADV_EEE_T1L, val); if (val < 0) return val; if (val > 0) changed = 1; } return changed; } /** * genphy_c45_read_eee_adv - read advertised EEE link modes * @phydev: target phy_device struct * @adv: the linkmode advertisement status */ int genphy_c45_read_eee_adv(struct phy_device *phydev, unsigned long *adv) { int val; if (linkmode_intersects(phydev->supported_eee, PHY_EEE_CAP1_FEATURES)) { /* IEEE 802.3-2018 45.2.7.13 EEE advertisement 1 * (Register 7.60) */ val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_EEE_ADV); if (val < 0) return val; mii_eee_cap1_mod_linkmode_t(adv, val); } if (linkmode_test_bit(ETHTOOL_LINK_MODE_10baseT1L_Full_BIT, phydev->supported_eee)) { /* IEEE 802.3cg-2019 45.2.7.25 10BASE-T1 AN control register * (Register 7.526) */ val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_10BT1_AN_CTRL); if (val < 0) return val; mii_10base_t1_adv_mod_linkmode_t(adv, val); } return 0; } /** * genphy_c45_read_eee_lpa - read advertised LP EEE link modes * @phydev: target phy_device struct * @lpa: the linkmode LP advertisement status */ static int genphy_c45_read_eee_lpa(struct phy_device *phydev, unsigned long *lpa) { int val; if (linkmode_intersects(phydev->supported_eee, PHY_EEE_CAP1_FEATURES)) { /* IEEE 802.3-2018 45.2.7.14 EEE link partner ability 1 * (Register 7.61) */ val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_EEE_LPABLE); if (val < 0) return val; mii_eee_cap1_mod_linkmode_t(lpa, val); } if (linkmode_test_bit(ETHTOOL_LINK_MODE_10baseT1L_Full_BIT, phydev->supported_eee)) { /* IEEE 802.3cg-2019 45.2.7.26 10BASE-T1 AN status register * (Register 7.527) */ val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_10BT1_AN_STAT); if (val < 0) return val; mii_10base_t1_adv_mod_linkmode_t(lpa, val); } return 0; } /** * genphy_c45_read_eee_cap1 - read supported EEE link modes from register 3.20 * @phydev: target phy_device struct */ static int genphy_c45_read_eee_cap1(struct phy_device *phydev) { int val; /* IEEE 802.3-2018 45.2.3.10 EEE control and capability 1 * (Register 3.20) */ val = phy_read_mmd(phydev, MDIO_MMD_PCS, MDIO_PCS_EEE_ABLE); if (val < 0) return val; /* The 802.3 2018 standard says the top 2 bits are reserved and should * read as 0. Also, it seems unlikely anybody will build a PHY which * supports 100GBASE-R deep sleep all the way down to 100BASE-TX EEE. * If MDIO_PCS_EEE_ABLE is 0xffff assume EEE is not supported. */ if (val == 0xffff) return 0; mii_eee_cap1_mod_linkmode_t(phydev->supported_eee, val); /* Some buggy devices indicate EEE link modes in MDIO_PCS_EEE_ABLE * which they don't support as indicated by BMSR, ESTATUS etc. */ linkmode_and(phydev->supported_eee, phydev->supported_eee, phydev->supported); return 0; } /** * genphy_c45_read_eee_abilities - read supported EEE link modes * @phydev: target phy_device struct */ int genphy_c45_read_eee_abilities(struct phy_device *phydev) { int val; /* There is not indicator whether optional register * "EEE control and capability 1" (3.20) is supported. Read it only * on devices with appropriate linkmodes. */ if (linkmode_intersects(phydev->supported, PHY_EEE_CAP1_FEATURES)) { val = genphy_c45_read_eee_cap1(phydev); if (val) return val; } if (linkmode_test_bit(ETHTOOL_LINK_MODE_10baseT1L_Full_BIT, phydev->supported)) { /* IEEE 802.3cg-2019 45.2.1.186b 10BASE-T1L PMA status register * (Register 1.2295) */ val = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_PMA_10T1L_STAT); if (val < 0) return val; linkmode_mod_bit(ETHTOOL_LINK_MODE_10baseT1L_Full_BIT, phydev->supported_eee, val & MDIO_PMA_10T1L_STAT_EEE); } return 0; } EXPORT_SYMBOL_GPL(genphy_c45_read_eee_abilities); /** * genphy_c45_an_config_eee_aneg - configure EEE advertisement * @phydev: target phy_device struct */ int genphy_c45_an_config_eee_aneg(struct phy_device *phydev) { if (!phydev->eee_enabled) { __ETHTOOL_DECLARE_LINK_MODE_MASK(adv) = {}; return genphy_c45_write_eee_adv(phydev, adv); } return genphy_c45_write_eee_adv(phydev, phydev->advertising_eee); } /** * genphy_c45_pma_baset1_read_abilities - read supported baset1 link modes from PMA * @phydev: target phy_device struct * * Read the supported link modes from the extended BASE-T1 ability register */ int genphy_c45_pma_baset1_read_abilities(struct phy_device *phydev) { int val; val = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_PMA_PMD_BT1); if (val < 0) return val; linkmode_mod_bit(ETHTOOL_LINK_MODE_10baseT1L_Full_BIT, phydev->supported, val & MDIO_PMA_PMD_BT1_B10L_ABLE); linkmode_mod_bit(ETHTOOL_LINK_MODE_100baseT1_Full_BIT, phydev->supported, val & MDIO_PMA_PMD_BT1_B100_ABLE); linkmode_mod_bit(ETHTOOL_LINK_MODE_1000baseT1_Full_BIT, phydev->supported, val & MDIO_PMA_PMD_BT1_B1000_ABLE); val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_T1_STAT); if (val < 0) return val; linkmode_mod_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, phydev->supported, val & MDIO_AN_STAT1_ABLE); return 0; } EXPORT_SYMBOL_GPL(genphy_c45_pma_baset1_read_abilities); /** * genphy_c45_pma_read_ext_abilities - read supported link modes from PMA * @phydev: target phy_device struct * * Read the supported link modes from the PMA/PMD extended ability register * (Register 1.11). */ int genphy_c45_pma_read_ext_abilities(struct phy_device *phydev) { int val; val = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_PMA_EXTABLE); if (val < 0) return val; linkmode_mod_bit(ETHTOOL_LINK_MODE_10000baseLRM_Full_BIT, phydev->supported, val & MDIO_PMA_EXTABLE_10GBLRM); linkmode_mod_bit(ETHTOOL_LINK_MODE_10000baseT_Full_BIT, phydev->supported, val & MDIO_PMA_EXTABLE_10GBT); linkmode_mod_bit(ETHTOOL_LINK_MODE_10000baseKX4_Full_BIT, phydev->supported, val & MDIO_PMA_EXTABLE_10GBKX4); linkmode_mod_bit(ETHTOOL_LINK_MODE_10000baseKR_Full_BIT, phydev->supported, val & MDIO_PMA_EXTABLE_10GBKR); linkmode_mod_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT, phydev->supported, val & MDIO_PMA_EXTABLE_1000BT); linkmode_mod_bit(ETHTOOL_LINK_MODE_1000baseKX_Full_BIT, phydev->supported, val & MDIO_PMA_EXTABLE_1000BKX); linkmode_mod_bit(ETHTOOL_LINK_MODE_100baseT_Full_BIT, phydev->supported, val & MDIO_PMA_EXTABLE_100BTX); linkmode_mod_bit(ETHTOOL_LINK_MODE_100baseT_Half_BIT, phydev->supported, val & MDIO_PMA_EXTABLE_100BTX); linkmode_mod_bit(ETHTOOL_LINK_MODE_10baseT_Full_BIT, phydev->supported, val & MDIO_PMA_EXTABLE_10BT); linkmode_mod_bit(ETHTOOL_LINK_MODE_10baseT_Half_BIT, phydev->supported, val & MDIO_PMA_EXTABLE_10BT); if (val & MDIO_PMA_EXTABLE_NBT) { val = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_PMA_NG_EXTABLE); if (val < 0) return val; linkmode_mod_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT, phydev->supported, val & MDIO_PMA_NG_EXTABLE_2_5GBT); linkmode_mod_bit(ETHTOOL_LINK_MODE_5000baseT_Full_BIT, phydev->supported, val & MDIO_PMA_NG_EXTABLE_5GBT); } if (val & MDIO_PMA_EXTABLE_BT1) { val = genphy_c45_pma_baset1_read_abilities(phydev); if (val < 0) return val; } return 0; } EXPORT_SYMBOL_GPL(genphy_c45_pma_read_ext_abilities); /** * genphy_c45_pma_read_abilities - read supported link modes from PMA * @phydev: target phy_device struct * * Read the supported link modes from the PMA Status 2 (1.8) register. If bit * 1.8.9 is set, the list of supported modes is build using the values in the * PMA Extended Abilities (1.11) register, indicating 1000BASET an 10G related * modes. If bit 1.11.14 is set, then the list is also extended with the modes * in the 2.5G/5G PMA Extended register (1.21), indicating if 2.5GBASET and * 5GBASET are supported. */ int genphy_c45_pma_read_abilities(struct phy_device *phydev) { int val; linkmode_clear_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, phydev->supported); if (phydev->c45_ids.mmds_present & MDIO_DEVS_AN) { val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_STAT1); if (val < 0) return val; if (val & MDIO_AN_STAT1_ABLE) linkmode_set_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, phydev->supported); } val = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_STAT2); if (val < 0) return val; linkmode_mod_bit(ETHTOOL_LINK_MODE_10000baseSR_Full_BIT, phydev->supported, val & MDIO_PMA_STAT2_10GBSR); linkmode_mod_bit(ETHTOOL_LINK_MODE_10000baseLR_Full_BIT, phydev->supported, val & MDIO_PMA_STAT2_10GBLR); linkmode_mod_bit(ETHTOOL_LINK_MODE_10000baseER_Full_BIT, phydev->supported, val & MDIO_PMA_STAT2_10GBER); if (val & MDIO_PMA_STAT2_EXTABLE) { val = genphy_c45_pma_read_ext_abilities(phydev); if (val < 0) return val; } /* This is optional functionality. If not supported, we may get an error * which should be ignored. */ genphy_c45_read_eee_abilities(phydev); return 0; } EXPORT_SYMBOL_GPL(genphy_c45_pma_read_abilities); /* Read master/slave preference from registers. * The preference is read from the BIT(4) of BASE-T1 AN * advertisement register 7.515 and whether the preference * is forced or not, it is read from BASE-T1 AN advertisement * register 7.514. */ int genphy_c45_baset1_read_status(struct phy_device *phydev) { int ret; int cfg; phydev->master_slave_get = MASTER_SLAVE_CFG_UNKNOWN; phydev->master_slave_state = MASTER_SLAVE_STATE_UNKNOWN; ret = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_T1_ADV_L); if (ret < 0) return ret; cfg = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_T1_ADV_M); if (cfg < 0) return cfg; if (ret & MDIO_AN_T1_ADV_L_FORCE_MS) { if (cfg & MDIO_AN_T1_ADV_M_MST) phydev->master_slave_get = MASTER_SLAVE_CFG_MASTER_FORCE; else phydev->master_slave_get = MASTER_SLAVE_CFG_SLAVE_FORCE; } else { if (cfg & MDIO_AN_T1_ADV_M_MST) phydev->master_slave_get = MASTER_SLAVE_CFG_MASTER_PREFERRED; else phydev->master_slave_get = MASTER_SLAVE_CFG_SLAVE_PREFERRED; } return 0; } EXPORT_SYMBOL_GPL(genphy_c45_baset1_read_status); /** * genphy_c45_read_status - read PHY status * @phydev: target phy_device struct * * Reads status from PHY and sets phy_device members accordingly. */ int genphy_c45_read_status(struct phy_device *phydev) { int ret; ret = genphy_c45_read_link(phydev); if (ret) return ret; phydev->speed = SPEED_UNKNOWN; phydev->duplex = DUPLEX_UNKNOWN; phydev->pause = 0; phydev->asym_pause = 0; if (phydev->autoneg == AUTONEG_ENABLE) { ret = genphy_c45_read_lpa(phydev); if (ret) return ret; if (genphy_c45_baset1_able(phydev)) { ret = genphy_c45_baset1_read_status(phydev); if (ret < 0) return ret; } phy_resolve_aneg_linkmode(phydev); } else { ret = genphy_c45_read_pma(phydev); } return ret; } EXPORT_SYMBOL_GPL(genphy_c45_read_status); /** * genphy_c45_config_aneg - restart auto-negotiation or forced setup * @phydev: target phy_device struct * * Description: If auto-negotiation is enabled, we configure the * advertising, and then restart auto-negotiation. If it is not * enabled, then we force a configuration. */ int genphy_c45_config_aneg(struct phy_device *phydev) { bool changed = false; int ret; if (phydev->autoneg == AUTONEG_DISABLE) return genphy_c45_pma_setup_forced(phydev); ret = genphy_c45_an_config_aneg(phydev); if (ret < 0) return ret; if (ret > 0) changed = true; return genphy_c45_check_and_restart_aneg(phydev, changed); } EXPORT_SYMBOL_GPL(genphy_c45_config_aneg); /* The gen10g_* functions are the old Clause 45 stub */ int gen10g_config_aneg(struct phy_device *phydev) { return 0; } EXPORT_SYMBOL_GPL(gen10g_config_aneg); int genphy_c45_loopback(struct phy_device *phydev, bool enable) { return phy_modify_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL1, MDIO_PCS_CTRL1_LOOPBACK, enable ? MDIO_PCS_CTRL1_LOOPBACK : 0); } EXPORT_SYMBOL_GPL(genphy_c45_loopback); /** * genphy_c45_fast_retrain - configure fast retrain registers * @phydev: target phy_device struct * @enable: enable fast retrain or not * * Description: If fast-retrain is enabled, we configure PHY as * advertising fast retrain capable and THP Bypass Request, then * enable fast retrain. If it is not enabled, we configure fast * retrain disabled. */ int genphy_c45_fast_retrain(struct phy_device *phydev, bool enable) { int ret; if (!enable) return phy_clear_bits_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_PMA_10GBR_FSRT_CSR, MDIO_PMA_10GBR_FSRT_ENABLE); if (linkmode_test_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT, phydev->supported)) { ret = phy_set_bits_mmd(phydev, MDIO_MMD_AN, MDIO_AN_10GBT_CTRL, MDIO_AN_10GBT_CTRL_ADVFSRT2_5G); if (ret) return ret; ret = phy_set_bits_mmd(phydev, MDIO_MMD_AN, MDIO_AN_CTRL2, MDIO_AN_THP_BP2_5GT); if (ret) return ret; } return phy_set_bits_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_PMA_10GBR_FSRT_CSR, MDIO_PMA_10GBR_FSRT_ENABLE); } EXPORT_SYMBOL_GPL(genphy_c45_fast_retrain); /** * genphy_c45_plca_get_cfg - get PLCA configuration from standard registers * @phydev: target phy_device struct * @plca_cfg: output structure to store the PLCA configuration * * Description: if the PHY complies to the Open Alliance TC14 10BASE-T1S PLCA * Management Registers specifications, this function can be used to retrieve * the current PLCA configuration from the standard registers in MMD 31. */ int genphy_c45_plca_get_cfg(struct phy_device *phydev, struct phy_plca_cfg *plca_cfg) { int ret; ret = phy_read_mmd(phydev, MDIO_MMD_VEND2, MDIO_OATC14_PLCA_IDVER); if (ret < 0) return ret; if ((ret & MDIO_OATC14_PLCA_IDM) != OATC14_IDM) return -ENODEV; plca_cfg->version = ret & ~MDIO_OATC14_PLCA_IDM; ret = phy_read_mmd(phydev, MDIO_MMD_VEND2, MDIO_OATC14_PLCA_CTRL0); if (ret < 0) return ret; plca_cfg->enabled = !!(ret & MDIO_OATC14_PLCA_EN); ret = phy_read_mmd(phydev, MDIO_MMD_VEND2, MDIO_OATC14_PLCA_CTRL1); if (ret < 0) return ret; plca_cfg->node_cnt = (ret & MDIO_OATC14_PLCA_NCNT) >> 8; plca_cfg->node_id = (ret & MDIO_OATC14_PLCA_ID); ret = phy_read_mmd(phydev, MDIO_MMD_VEND2, MDIO_OATC14_PLCA_TOTMR); if (ret < 0) return ret; plca_cfg->to_tmr = ret & MDIO_OATC14_PLCA_TOT; ret = phy_read_mmd(phydev, MDIO_MMD_VEND2, MDIO_OATC14_PLCA_BURST); if (ret < 0) return ret; plca_cfg->burst_cnt = (ret & MDIO_OATC14_PLCA_MAXBC) >> 8; plca_cfg->burst_tmr = (ret & MDIO_OATC14_PLCA_BTMR); return 0; } EXPORT_SYMBOL_GPL(genphy_c45_plca_get_cfg); /** * genphy_c45_plca_set_cfg - set PLCA configuration using standard registers * @phydev: target phy_device struct * @plca_cfg: structure containing the PLCA configuration. Fields set to -1 are * not to be changed. * * Description: if the PHY complies to the Open Alliance TC14 10BASE-T1S PLCA * Management Registers specifications, this function can be used to modify * the PLCA configuration using the standard registers in MMD 31. */ int genphy_c45_plca_set_cfg(struct phy_device *phydev, const struct phy_plca_cfg *plca_cfg) { u16 val = 0; int ret; // PLCA IDVER is read-only if (plca_cfg->version >= 0) return -EINVAL; // first of all, disable PLCA if required if (plca_cfg->enabled == 0) { ret = phy_clear_bits_mmd(phydev, MDIO_MMD_VEND2, MDIO_OATC14_PLCA_CTRL0, MDIO_OATC14_PLCA_EN); if (ret < 0) return ret; } // check if we need to set the PLCA node count, node ID, or both if (plca_cfg->node_cnt >= 0 || plca_cfg->node_id >= 0) { /* if one between node count and node ID is -not- to be * changed, read the register to later perform merge/purge of * the configuration as appropriate */ if (plca_cfg->node_cnt < 0 || plca_cfg->node_id < 0) { ret = phy_read_mmd(phydev, MDIO_MMD_VEND2, MDIO_OATC14_PLCA_CTRL1); if (ret < 0) return ret; val = ret; } if (plca_cfg->node_cnt >= 0) val = (val & ~MDIO_OATC14_PLCA_NCNT) | (plca_cfg->node_cnt << 8); if (plca_cfg->node_id >= 0) val = (val & ~MDIO_OATC14_PLCA_ID) | (plca_cfg->node_id); ret = phy_write_mmd(phydev, MDIO_MMD_VEND2, MDIO_OATC14_PLCA_CTRL1, val); if (ret < 0) return ret; } if (plca_cfg->to_tmr >= 0) { ret = phy_write_mmd(phydev, MDIO_MMD_VEND2, MDIO_OATC14_PLCA_TOTMR, plca_cfg->to_tmr); if (ret < 0) return ret; } // check if we need to set the PLCA burst count, burst timer, or both if (plca_cfg->burst_cnt >= 0 || plca_cfg->burst_tmr >= 0) { /* if one between burst count and burst timer is -not- to be * changed, read the register to later perform merge/purge of * the configuration as appropriate */ if (plca_cfg->burst_cnt < 0 || plca_cfg->burst_tmr < 0) { ret = phy_read_mmd(phydev, MDIO_MMD_VEND2, MDIO_OATC14_PLCA_BURST); if (ret < 0) return ret; val = ret; } if (plca_cfg->burst_cnt >= 0) val = (val & ~MDIO_OATC14_PLCA_MAXBC) | (plca_cfg->burst_cnt << 8); if (plca_cfg->burst_tmr >= 0) val = (val & ~MDIO_OATC14_PLCA_BTMR) | (plca_cfg->burst_tmr); ret = phy_write_mmd(phydev, MDIO_MMD_VEND2, MDIO_OATC14_PLCA_BURST, val); if (ret < 0) return ret; } // if we need to enable PLCA, do it at the end if (plca_cfg->enabled > 0) { ret = phy_set_bits_mmd(phydev, MDIO_MMD_VEND2, MDIO_OATC14_PLCA_CTRL0, MDIO_OATC14_PLCA_EN); if (ret < 0) return ret; } return 0; } EXPORT_SYMBOL_GPL(genphy_c45_plca_set_cfg); /** * genphy_c45_plca_get_status - get PLCA status from standard registers * @phydev: target phy_device struct * @plca_st: output structure to store the PLCA status * * Description: if the PHY complies to the Open Alliance TC14 10BASE-T1S PLCA * Management Registers specifications, this function can be used to retrieve * the current PLCA status information from the standard registers in MMD 31. */ int genphy_c45_plca_get_status(struct phy_device *phydev, struct phy_plca_status *plca_st) { int ret; ret = phy_read_mmd(phydev, MDIO_MMD_VEND2, MDIO_OATC14_PLCA_STATUS); if (ret < 0) return ret; plca_st->pst = !!(ret & MDIO_OATC14_PLCA_PST); return 0; } EXPORT_SYMBOL_GPL(genphy_c45_plca_get_status); /** * genphy_c45_eee_is_active - get EEE status * @phydev: target phy_device struct * @adv: variable to store advertised linkmodes * @lp: variable to store LP advertised linkmodes * @is_enabled: variable to store EEE enabled/disabled configuration value * * Description: this function will read local and link partner PHY * advertisements. Compare them return current EEE state. */ int genphy_c45_eee_is_active(struct phy_device *phydev, unsigned long *adv, unsigned long *lp, bool *is_enabled) { __ETHTOOL_DECLARE_LINK_MODE_MASK(tmp_adv) = {}; __ETHTOOL_DECLARE_LINK_MODE_MASK(tmp_lp) = {}; __ETHTOOL_DECLARE_LINK_MODE_MASK(common); bool eee_enabled, eee_active; int ret; ret = genphy_c45_read_eee_adv(phydev, tmp_adv); if (ret) return ret; ret = genphy_c45_read_eee_lpa(phydev, tmp_lp); if (ret) return ret; eee_enabled = !linkmode_empty(tmp_adv); linkmode_and(common, tmp_adv, tmp_lp); if (eee_enabled && !linkmode_empty(common)) eee_active = phy_check_valid(phydev->speed, phydev->duplex, common); else eee_active = false; if (adv) linkmode_copy(adv, tmp_adv); if (lp) linkmode_copy(lp, tmp_lp); if (is_enabled) *is_enabled = eee_enabled; return eee_active; } EXPORT_SYMBOL(genphy_c45_eee_is_active); /** * genphy_c45_ethtool_get_eee - get EEE supported and status * @phydev: target phy_device struct * @data: ethtool_eee data * * Description: it reports the Supported/Advertisement/LP Advertisement * capabilities. */ int genphy_c45_ethtool_get_eee(struct phy_device *phydev, struct ethtool_eee *data) { __ETHTOOL_DECLARE_LINK_MODE_MASK(adv) = {}; __ETHTOOL_DECLARE_LINK_MODE_MASK(lp) = {}; bool overflow = false, is_enabled; int ret; ret = genphy_c45_eee_is_active(phydev, adv, lp, &is_enabled); if (ret < 0) return ret; data->eee_enabled = is_enabled; data->eee_active = ret; if (!ethtool_convert_link_mode_to_legacy_u32(&data->supported, phydev->supported_eee)) overflow = true; if (!ethtool_convert_link_mode_to_legacy_u32(&data->advertised, adv)) overflow = true; if (!ethtool_convert_link_mode_to_legacy_u32(&data->lp_advertised, lp)) overflow = true; if (overflow) phydev_warn(phydev, "Not all supported or advertised EEE link modes were passed to the user space\n"); return 0; } EXPORT_SYMBOL(genphy_c45_ethtool_get_eee); /** * genphy_c45_ethtool_set_eee - set EEE supported and status * @phydev: target phy_device struct * @data: ethtool_eee data * * Description: sets the Supported/Advertisement/LP Advertisement * capabilities. If eee_enabled is false, no links modes are * advertised, but the previously advertised link modes are * retained. This allows EEE to be enabled/disabled in a * non-destructive way. */ int genphy_c45_ethtool_set_eee(struct phy_device *phydev, struct ethtool_eee *data) { int ret; if (data->eee_enabled) { if (data->advertised) { __ETHTOOL_DECLARE_LINK_MODE_MASK(adv); ethtool_convert_legacy_u32_to_link_mode(adv, data->advertised); linkmode_andnot(adv, adv, phydev->supported_eee); if (!linkmode_empty(adv)) { phydev_warn(phydev, "At least some EEE link modes are not supported.\n"); return -EINVAL; } ethtool_convert_legacy_u32_to_link_mode(phydev->advertising_eee, data->advertised); } else { linkmode_copy(phydev->advertising_eee, phydev->supported_eee); } phydev->eee_enabled = true; } else { phydev->eee_enabled = false; } ret = genphy_c45_an_config_eee_aneg(phydev); if (ret < 0) return ret; if (ret > 0) return phy_restart_aneg(phydev); return 0; } EXPORT_SYMBOL(genphy_c45_ethtool_set_eee); struct phy_driver genphy_c45_driver = { .phy_id = 0xffffffff, .phy_id_mask = 0xffffffff, .name = "Generic Clause 45 PHY", .read_status = genphy_c45_read_status, };