diff options
author | 2020-08-18 14:27:12 -0700 | |
---|---|---|
committer | 2020-08-18 14:27:12 -0700 | |
commit | 18445bf405cb331117bc98427b1ba6f12418ad17 (patch) | |
tree | 75c0aca0c0eee635433e0506787364839702c9fb | |
parent | Merge tag 'fixes-2020-08-18' of git://git.kernel.org/pub/scm/linux/kernel/git... (diff) | |
parent | Merge series "spi: stm32: various driver fixes" from Alain Volmat <alain.volm... (diff) | |
download | linux-18445bf405cb331117bc98427b1ba6f12418ad17.tar.gz linux-18445bf405cb331117bc98427b1ba6f12418ad17.tar.bz2 linux-18445bf405cb331117bc98427b1ba6f12418ad17.zip |
Merge tag 'spi-fix-v5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A bunch of fixes that came in for SPI during the merge window.
Some from ST and others for their controller, one from Lukas for a
race between device addition and controller unregistration and one
from fix from Geert for the DT bindings which unbreaks validation"
* tag 'spi-fix-v5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
dt-bindings: lpspi: Add missing boolean type for fsl,spi-only-use-cs1-sel
spi: stm32: always perform registers configuration prior to transfer
spi: stm32: fixes suspend/resume management
spi: stm32: fix stm32_spi_prepare_mbr in case of odd clk_rate
spi: stm32: fix fifo threshold level in case of short transfer
spi: stm32h7: fix race condition at end of transfer
spi: stm32: clear only asserted irq flags on interrupt
spi: Prevent adding devices below an unregistering controller
-rw-r--r-- | Documentation/devicetree/bindings/spi/spi-fsl-lpspi.yaml | 1 | ||||
-rw-r--r-- | drivers/spi/Kconfig | 3 | ||||
-rw-r--r-- | drivers/spi/spi-stm32.c | 100 | ||||
-rw-r--r-- | drivers/spi/spi.c | 21 |
4 files changed, 86 insertions, 39 deletions
diff --git a/Documentation/devicetree/bindings/spi/spi-fsl-lpspi.yaml b/Documentation/devicetree/bindings/spi/spi-fsl-lpspi.yaml index 22882e769e26..312d8fee9dbb 100644 --- a/Documentation/devicetree/bindings/spi/spi-fsl-lpspi.yaml +++ b/Documentation/devicetree/bindings/spi/spi-fsl-lpspi.yaml @@ -39,6 +39,7 @@ properties: spi common code does not support use of CS signals discontinuously. i.MX8DXL-EVK board only uses CS1 without using CS0. Therefore, add this property to re-config the chipselect value in the LPSPI driver. + type: boolean required: - compatible diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index c3008e423f59..c6ea760ea5f0 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -1017,4 +1017,7 @@ config SPI_SLAVE_SYSTEM_CONTROL endif # SPI_SLAVE +config SPI_DYNAMIC + def_bool ACPI || OF_DYNAMIC || SPI_SLAVE + endif # SPI diff --git a/drivers/spi/spi-stm32.c b/drivers/spi/spi-stm32.c index 4c643dfc7fbb..d4b33b358a31 100644 --- a/drivers/spi/spi-stm32.c +++ b/drivers/spi/spi-stm32.c @@ -13,6 +13,7 @@ #include <linux/iopoll.h> #include <linux/module.h> #include <linux/of_platform.h> +#include <linux/pinctrl/consumer.h> #include <linux/pm_runtime.h> #include <linux/reset.h> #include <linux/spi/spi.h> @@ -441,7 +442,8 @@ static int stm32_spi_prepare_mbr(struct stm32_spi *spi, u32 speed_hz, { u32 div, mbrdiv; - div = DIV_ROUND_UP(spi->clk_rate, speed_hz); + /* Ensure spi->clk_rate is even */ + div = DIV_ROUND_UP(spi->clk_rate & ~0x1, speed_hz); /* * SPI framework set xfer->speed_hz to master->max_speed_hz if @@ -467,20 +469,27 @@ static int stm32_spi_prepare_mbr(struct stm32_spi *spi, u32 speed_hz, /** * stm32h7_spi_prepare_fthlv - Determine FIFO threshold level * @spi: pointer to the spi controller data structure + * @xfer_len: length of the message to be transferred */ -static u32 stm32h7_spi_prepare_fthlv(struct stm32_spi *spi) +static u32 stm32h7_spi_prepare_fthlv(struct stm32_spi *spi, u32 xfer_len) { - u32 fthlv, half_fifo; + u32 fthlv, half_fifo, packet; /* data packet should not exceed 1/2 of fifo space */ half_fifo = (spi->fifo_size / 2); + /* data_packet should not exceed transfer length */ + if (half_fifo > xfer_len) + packet = xfer_len; + else + packet = half_fifo; + if (spi->cur_bpw <= 8) - fthlv = half_fifo; + fthlv = packet; else if (spi->cur_bpw <= 16) - fthlv = half_fifo / 2; + fthlv = packet / 2; else - fthlv = half_fifo / 4; + fthlv = packet / 4; /* align packet size with data registers access */ if (spi->cur_bpw > 8) @@ -488,6 +497,9 @@ static u32 stm32h7_spi_prepare_fthlv(struct stm32_spi *spi) else fthlv -= (fthlv % 4); /* multiple of 4 */ + if (!fthlv) + fthlv = 1; + return fthlv; } @@ -966,13 +978,13 @@ static irqreturn_t stm32h7_spi_irq_thread(int irq, void *dev_id) if (!spi->cur_usedma && (spi->rx_buf && (spi->rx_len > 0))) stm32h7_spi_read_rxfifo(spi, false); - writel_relaxed(mask, spi->base + STM32H7_SPI_IFCR); + writel_relaxed(sr & mask, spi->base + STM32H7_SPI_IFCR); spin_unlock_irqrestore(&spi->lock, flags); if (end) { - spi_finalize_current_transfer(master); stm32h7_spi_disable(spi); + spi_finalize_current_transfer(master); } return IRQ_HANDLED; @@ -1393,7 +1405,7 @@ static void stm32h7_spi_set_bpw(struct stm32_spi *spi) cfg1_setb |= (bpw << STM32H7_SPI_CFG1_DSIZE_SHIFT) & STM32H7_SPI_CFG1_DSIZE; - spi->cur_fthlv = stm32h7_spi_prepare_fthlv(spi); + spi->cur_fthlv = stm32h7_spi_prepare_fthlv(spi, spi->cur_xferlen); fthlv = spi->cur_fthlv - 1; cfg1_clrb |= STM32H7_SPI_CFG1_FTHLV; @@ -1585,39 +1597,33 @@ static int stm32_spi_transfer_one_setup(struct stm32_spi *spi, unsigned long flags; unsigned int comm_type; int nb_words, ret = 0; + int mbr; spin_lock_irqsave(&spi->lock, flags); - if (spi->cur_bpw != transfer->bits_per_word) { - spi->cur_bpw = transfer->bits_per_word; - spi->cfg->set_bpw(spi); - } - - if (spi->cur_speed != transfer->speed_hz) { - int mbr; + spi->cur_xferlen = transfer->len; - /* Update spi->cur_speed with real clock speed */ - mbr = stm32_spi_prepare_mbr(spi, transfer->speed_hz, - spi->cfg->baud_rate_div_min, - spi->cfg->baud_rate_div_max); - if (mbr < 0) { - ret = mbr; - goto out; - } + spi->cur_bpw = transfer->bits_per_word; + spi->cfg->set_bpw(spi); - transfer->speed_hz = spi->cur_speed; - stm32_spi_set_mbr(spi, mbr); + /* Update spi->cur_speed with real clock speed */ + mbr = stm32_spi_prepare_mbr(spi, transfer->speed_hz, + spi->cfg->baud_rate_div_min, + spi->cfg->baud_rate_div_max); + if (mbr < 0) { + ret = mbr; + goto out; } + transfer->speed_hz = spi->cur_speed; + stm32_spi_set_mbr(spi, mbr); + comm_type = stm32_spi_communication_type(spi_dev, transfer); - if (spi->cur_comm != comm_type) { - ret = spi->cfg->set_mode(spi, comm_type); + ret = spi->cfg->set_mode(spi, comm_type); + if (ret < 0) + goto out; - if (ret < 0) - goto out; - - spi->cur_comm = comm_type; - } + spi->cur_comm = comm_type; if (spi->cfg->set_data_idleness) spi->cfg->set_data_idleness(spi, transfer->len); @@ -1635,8 +1641,6 @@ static int stm32_spi_transfer_one_setup(struct stm32_spi *spi, goto out; } - spi->cur_xferlen = transfer->len; - dev_dbg(spi->dev, "transfer communication mode set to %d\n", spi->cur_comm); dev_dbg(spi->dev, @@ -1996,6 +2000,8 @@ static int stm32_spi_remove(struct platform_device *pdev) pm_runtime_disable(&pdev->dev); + pinctrl_pm_select_sleep_state(&pdev->dev); + return 0; } @@ -2007,13 +2013,18 @@ static int stm32_spi_runtime_suspend(struct device *dev) clk_disable_unprepare(spi->clk); - return 0; + return pinctrl_pm_select_sleep_state(dev); } static int stm32_spi_runtime_resume(struct device *dev) { struct spi_master *master = dev_get_drvdata(dev); struct stm32_spi *spi = spi_master_get_devdata(master); + int ret; + + ret = pinctrl_pm_select_default_state(dev); + if (ret) + return ret; return clk_prepare_enable(spi->clk); } @@ -2043,10 +2054,23 @@ static int stm32_spi_resume(struct device *dev) return ret; ret = spi_master_resume(master); - if (ret) + if (ret) { clk_disable_unprepare(spi->clk); + return ret; + } - return ret; + ret = pm_runtime_get_sync(dev); + if (ret) { + dev_err(dev, "Unable to power device:%d\n", ret); + return ret; + } + + spi->cfg->config(spi); + + pm_runtime_mark_last_busy(dev); + pm_runtime_put_autosuspend(dev); + + return 0; } #endif diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c index 6626587e77b4..dc12af018350 100644 --- a/drivers/spi/spi.c +++ b/drivers/spi/spi.c @@ -475,6 +475,12 @@ static LIST_HEAD(spi_controller_list); */ static DEFINE_MUTEX(board_lock); +/* + * Prevents addition of devices with same chip select and + * addition of devices below an unregistering controller. + */ +static DEFINE_MUTEX(spi_add_lock); + /** * spi_alloc_device - Allocate a new SPI device * @ctlr: Controller to which device is connected @@ -554,7 +560,6 @@ static int spi_dev_check(struct device *dev, void *data) */ int spi_add_device(struct spi_device *spi) { - static DEFINE_MUTEX(spi_add_lock); struct spi_controller *ctlr = spi->controller; struct device *dev = ctlr->dev.parent; int status; @@ -582,6 +587,13 @@ int spi_add_device(struct spi_device *spi) goto done; } + /* Controller may unregister concurrently */ + if (IS_ENABLED(CONFIG_SPI_DYNAMIC) && + !device_is_registered(&ctlr->dev)) { + status = -ENODEV; + goto done; + } + /* Descriptors take precedence */ if (ctlr->cs_gpiods) spi->cs_gpiod = ctlr->cs_gpiods[spi->chip_select]; @@ -2795,6 +2807,10 @@ void spi_unregister_controller(struct spi_controller *ctlr) struct spi_controller *found; int id = ctlr->bus_num; + /* Prevent addition of new devices, unregister existing ones */ + if (IS_ENABLED(CONFIG_SPI_DYNAMIC)) + mutex_lock(&spi_add_lock); + device_for_each_child(&ctlr->dev, NULL, __unregister); /* First make sure that this controller was ever added */ @@ -2815,6 +2831,9 @@ void spi_unregister_controller(struct spi_controller *ctlr) if (found == ctlr) idr_remove(&spi_master_idr, id); mutex_unlock(&board_lock); + + if (IS_ENABLED(CONFIG_SPI_DYNAMIC)) + mutex_unlock(&spi_add_lock); } EXPORT_SYMBOL_GPL(spi_unregister_controller); |