Merge tag 'intel-pinctrl-v6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/intel into devel

intel-pinctrl for v6.3-1

* Add ~4kOhm bias support to Intel pin control drivers
* Convert Intel pin control drivers to use INTEL_COMMUNITY_*()
* Add struct pinfunction and use it in Intel pin control drivers
* Make pin control documentation up to date
* Miscellaneous cleanups

The following is an automated git shortlog grouped by driver:

pinctrl:
 - Proofreading and updating the documentation accordingly
 - Proofreading and updating the documentation (part 2)

alderlake:
 -  Replace ADL_COMMUNITY() by INTEL_COMMUNITY_GPPS()

baytrail:
 -  Convert to use new memeber in struct intel_function

broxton:
 -  Replace BXT_COMMUNITY() by INTEL_COMMUNITY_SIZE()

cannonlake:
 -  Replace CNL_COMMUNITY() by INTEL_COMMUNITY_GPPS()

cedarfork:
 -  Replace CDF_COMMUNITY() by INTEL_COMMUNITY_GPPS()

cherryview:
 -  Convert to use new memeber in struct intel_function

denverton:
 -  Replace DNV_COMMUNITY() by INTEL_COMMUNITY_GPPS()

elkhartlake:
 -  Replace EHL_COMMUNITY() by INTEL_COMMUNITY_GPPS()

emmitsburg:
 -  Replace EBG_COMMUNITY() by INTEL_COMMUNITY_GPPS()

geminilake:
 -  Replace GLK_COMMUNITY() by INTEL_COMMUNITY_SIZE()

icelake:
 -  Replace ICL_COMMUNITY() by INTEL_COMMUNITY_GPPS()

intel:
 -  Get rid of unused members in struct intel_function
 -  Make use of struct pinfunction and PINCTRL_PINFUNCTION()
 -  Define maximum pad number in the group
 -  Use same order of bit fields for PADCFG2
 -  Add ~4k bias support
 -  Add definitions to all possible biases
 -  Deduplicate some code in intel_config_set_pull()
 -  Add default case to intel_config_set_pull()
 -  Convert to generic_handle_domain_irq()
 -  Always use gpp_num_padown_regs in the main driver
 -  Introduce INTEL_COMMUNITY_*() to unify community macros

Introduce struct pinfunction and PINCTRL_PINFUNCTION() macro:
 - Introduce struct pinfunction and PINCTRL_PINFUNCTION() macro

jasperlake:
 -  Replace JSL_COMMUNITY() by INTEL_COMMUNITY_GPPS()

lakefield:
 -  Replace LKF_COMMUNITY() by INTEL_COMMUNITY_GPPS()

lewisburg:
 -  Replace LBG_COMMUNITY() by INTEL_COMMUNITY_SIZE()

lynxpoint:
 -  Convert to use new memeber in struct intel_function

merrifield:
 -  Convert to use new memeber in struct intel_function

meteorlake:
 -  Replace MTL_COMMUNITY() by INTEL_COMMUNITY_GPPS()

moorefield:
 -  Convert to use new memeber in struct intel_function

sunrisepoint:
 -  Replace SPT_COMMUNITY() by INTEL_COMMUNITY_*()

tigerlake:
 -  Replace TGL_COMMUNITY() by INTEL_COMMUNITY_GPPS()

24 files changed, 440 insertions, 570 deletions

diff --git a/Documentation/driver-api/pin-control.rst b/Documentation/driver-api/pin-control.rst
index 0022e930e93e..bf5a78783861 100644
--- a/Documentation/driver-api/pin-control.rst
+++ b/Documentation/driver-api/pin-control.rst
@@ -11,20 +11,18 @@ This subsystem deals with:
 - Multiplexing of pins, pads, fingers (etc) see below for details
 
 - Configuration of pins, pads, fingers (etc), such as software-controlled
-  biasing and driving mode specific pins, such as pull-up/down, open drain,
+  biasing and driving mode specific pins, such as pull-up, pull-down, open drain,
   load capacitance etc.
 
 Top-level interface
 ===================
 
-Definition of PIN CONTROLLER:
+Definitions:
 
-- A pin controller is a piece of hardware, usually a set of registers, that
+- A PIN CONTROLLER is a piece of hardware, usually a set of registers, that
   can control PINs. It may be able to multiplex, bias, set load capacitance,
   set drive strength, etc. for individual pins or groups of pins.
 
-Definition of PIN:
-
 - PINS are equal to pads, fingers, balls or whatever packaging input or
   output line you want to control and these are denoted by unsigned integers
   in the range 0..maxpin. This numberspace is local to each PIN CONTROLLER, so
@@ -57,7 +55,9 @@ Here is an example of a PGA (Pin Grid Array) chip seen from underneath::
    1    o   o   o   o   o   o   o   o
 
 To register a pin controller and name all the pins on this package we can do
-this in our driver::
+this in our driver:
+
+.. code-block:: c
 
 	#include <linux/pinctrl/pinctrl.h>
 
@@ -78,14 +78,13 @@ this in our driver::
 		.owner = THIS_MODULE,
 	};
 
-	int __init foo_probe(void)
+	int __init foo_init(void)
 	{
 		int error;
 
 		struct pinctrl_dev *pctl;
 
-		error = pinctrl_register_and_init(&foo_desc, <PARENT>,
-						  NULL, &pctl);
+		error = pinctrl_register_and_init(&foo_desc, <PARENT>, NULL, &pctl);
 		if (error)
 			return error;
 
@@ -95,20 +94,20 @@ this in our driver::
 To enable the pinctrl subsystem and the subgroups for PINMUX and PINCONF and
 selected drivers, you need to select them from your machine's Kconfig entry,
 since these are so tightly integrated with the machines they are used on.
-See for example arch/arm/mach-ux500/Kconfig for an example.
+See ``arch/arm/mach-ux500/Kconfig`` for an example.
 
 Pins usually have fancier names than this. You can find these in the datasheet
 for your chip. Notice that the core pinctrl.h file provides a fancy macro
-called PINCTRL_PIN() to create the struct entries. As you can see I enumerated
-the pins from 0 in the upper left corner to 63 in the lower right corner.
+called ``PINCTRL_PIN()`` to create the struct entries. As you can see the pins are
+enumerated from 0 in the upper left corner to 63 in the lower right corner.
 This enumeration was arbitrarily chosen, in practice you need to think
 through your numbering system so that it matches the layout of registers
 and such things in your driver, or the code may become complicated. You must
 also consider matching of offsets to the GPIO ranges that may be handled by
 the pin controller.
 
-For a padring with 467 pads, as opposed to actual pins, I used an enumeration
-like this, walking around the edge of the chip, which seems to be industry
+For a padding with 467 pads, as opposed to actual pins, the enumeration will
+be like this, walking around the edge of the chip, which seems to be industry
 standard too (all these pads had names, too)::
 
 
@@ -132,50 +131,38 @@ on { 0, 8, 16, 24 }, and a group of pins dealing with an I2C interface on pins
 on { 24, 25 }.
 
 These two groups are presented to the pin control subsystem by implementing
-some generic pinctrl_ops like this::
+some generic ``pinctrl_ops`` like this:
 
-	#include <linux/pinctrl/pinctrl.h>
+.. code-block:: c
 
-	struct foo_group {
-		const char *name;
-		const unsigned int *pins;
-		const unsigned num_pins;
-	};
+	#include <linux/pinctrl/pinctrl.h>
 
 	static const unsigned int spi0_pins[] = { 0, 8, 16, 24 };
 	static const unsigned int i2c0_pins[] = { 24, 25 };
 
-	static const struct foo_group foo_groups[] = {
-		{
-			.name = "spi0_grp",
-			.pins = spi0_pins,
-			.num_pins = ARRAY_SIZE(spi0_pins),
-		},
-		{
-			.name = "i2c0_grp",
-			.pins = i2c0_pins,
-			.num_pins = ARRAY_SIZE(i2c0_pins),
-		},
+	static const struct pingroup foo_groups[] = {
+		PINCTRL_PINGROUP("spi0_grp", spi0_pins, ARRAY_SIZE(spi0_pins)),
+		PINCTRL_PINGROUP("i2c0_grp", i2c0_pins, ARRAY_SIZE(i2c0_pins)),
 	};
 
-
 	static int foo_get_groups_count(struct pinctrl_dev *pctldev)
 	{
 		return ARRAY_SIZE(foo_groups);
 	}
 
 	static const char *foo_get_group_name(struct pinctrl_dev *pctldev,
-					unsigned selector)
+					      unsigned int selector)
 	{
 		return foo_groups[selector].name;
 	}
 
-	static int foo_get_group_pins(struct pinctrl_dev *pctldev, unsigned selector,
-				const unsigned **pins,
-				unsigned *num_pins)
+	static int foo_get_group_pins(struct pinctrl_dev *pctldev,
+				      unsigned int selector,
+				      const unsigned int **pins,
+				      unsigned int *npins)
 	{
-		*pins = (unsigned *) foo_groups[selector].pins;
-		*num_pins = foo_groups[selector].num_pins;
+		*pins = foo_groups[selector].pins;
+		*npins = foo_groups[selector].npins;
 		return 0;
 	}
 
@@ -185,13 +172,12 @@ some generic pinctrl_ops like this::
 		.get_group_pins = foo_get_group_pins,
 	};
 
-
 	static struct pinctrl_desc foo_desc = {
-	...
-	.pctlops = &foo_pctrl_ops,
+		...
+		.pctlops = &foo_pctrl_ops,
 	};
 
-The pin control subsystem will call the .get_groups_count() function to
+The pin control subsystem will call the ``.get_groups_count()`` function to
 determine the total number of legal selectors, then it will call the other functions
 to retrieve the name and pins of the group. Maintaining the data structure of
 the groups is up to the driver, this is just a simple example - in practice you
@@ -204,59 +190,62 @@ Pin configuration
 
 Pins can sometimes be software-configured in various ways, mostly related
 to their electronic properties when used as inputs or outputs. For example you
-may be able to make an output pin high impedance, or "tristate" meaning it is
+may be able to make an output pin high impedance (Hi-Z), or "tristate" meaning it is
 effectively disconnected. You may be able to connect an input pin to VDD or GND
 using a certain resistor value - pull up and pull down - so that the pin has a
 stable value when nothing is driving the rail it is connected to, or when it's
 unconnected.
 
 Pin configuration can be programmed by adding configuration entries into the
-mapping table; see section "Board/machine configuration" below.
+mapping table; see section `Board/machine configuration`_ below.
 
 The format and meaning of the configuration parameter, PLATFORM_X_PULL_UP
 above, is entirely defined by the pin controller driver.
 
 The pin configuration driver implements callbacks for changing pin
-configuration in the pin controller ops like this::
+configuration in the pin controller ops like this:
+
+.. code-block:: c
 
-	#include <linux/pinctrl/pinctrl.h>
 	#include <linux/pinctrl/pinconf.h>
+	#include <linux/pinctrl/pinctrl.h>
+
 	#include "platform_x_pindefs.h"
 
 	static int foo_pin_config_get(struct pinctrl_dev *pctldev,
-			unsigned offset,
-			unsigned long *config)
+				      unsigned int offset,
+				      unsigned long *config)
 	{
 		struct my_conftype conf;
 
-		... Find setting for pin @ offset ...
+		/* ... Find setting for pin @ offset ... */
 
 		*config = (unsigned long) conf;
 	}
 
 	static int foo_pin_config_set(struct pinctrl_dev *pctldev,
-			unsigned offset,
-			unsigned long config)
+				      unsigned int offset,
+				      unsigned long config)
 	{
 		struct my_conftype *conf = (struct my_conftype *) config;
 
 		switch (conf) {
 			case PLATFORM_X_PULL_UP:
 			...
-			}
+			break;
 		}
 	}
 
-	static int foo_pin_config_group_get (struct pinctrl_dev *pctldev,
-			unsigned selector,
-			unsigned long *config)
+	static int foo_pin_config_group_get(struct pinctrl_dev *pctldev,
+					    unsigned selector,
+					    unsigned long *config)
 	{
 		...
 	}
 
-	static int foo_pin_config_group_set (struct pinctrl_dev *pctldev,
-			unsigned selector,
-			unsigned long config)
+	static int foo_pin_config_group_set(struct pinctrl_dev *pctldev,
+					    unsigned selector,
+					    unsigned long config)
 	{
 		...
 	}
@@ -281,8 +270,8 @@ The GPIO drivers may want to perform operations of various types on the same
 physical pins that are also registered as pin controller pins.
 
 First and foremost, the two subsystems can be used as completely orthogonal,
-see the section named "pin control requests from drivers" and
-"drivers needing both pin control and GPIOs" below for details. But in some
+see the section named `Pin control requests from drivers`_ and
+`Drivers needing both pin control and GPIOs`_ below for details. But in some
 situations a cross-subsystem mapping between pins and GPIOs is needed.
 
 Since the pin controller subsystem has its pinspace local to the pin controller
@@ -291,7 +280,13 @@ controller handles control of a certain GPIO pin. Since a single pin controller
 may be muxing several GPIO ranges (typically SoCs that have one set of pins,
 but internally several GPIO silicon blocks, each modelled as a struct
 gpio_chip) any number of GPIO ranges can be added to a pin controller instance
-like this::
+like this:
+
+.. code-block:: c
+
+	#include <linux/gpio/driver.h>
+
+	#include <linux/pinctrl/pinctrl.h>
 
 	struct gpio_chip chip_a;
 	struct gpio_chip chip_b;
@@ -302,7 +297,7 @@ like this::
 		.base = 32,
 		.pin_base = 32,
 		.npins = 16,
-		.gc = &chip_a;
+		.gc = &chip_a,
 	};
 
 	static struct pinctrl_gpio_range gpio_range_b = {
@@ -314,16 +309,18 @@ like this::
 		.gc = &chip_b;
 	};
 
+	int __init foo_init(void)
 	{
 		struct pinctrl_dev *pctl;
 		...
 		pinctrl_add_gpio_range(pctl, &gpio_range_a);
 		pinctrl_add_gpio_range(pctl, &gpio_range_b);
+		...
 	}
 
 So this complex system has one pin controller handling two different
 GPIO chips. "chip a" has 16 pins and "chip b" has 8 pins. The "chip a" and
-"chip b" have different .pin_base, which means a start pin number of the
+"chip b" have different ``pin_base``, which means a start pin number of the
 GPIO range.
 
 The GPIO range of "chip a" starts from the GPIO base of 32 and actual
@@ -331,7 +328,7 @@ pin range also starts from 32. However "chip b" has different starting
 offset for the GPIO range and pin range. The GPIO range of "chip b" starts
 from GPIO number 48, while the pin range of "chip b" starts from 64.
 
-We can convert a gpio number to actual pin number using this "pin_base".
+We can convert a gpio number to actual pin number using this ``pin_base``.
 They are mapped in the global GPIO pin space at:
 
 chip a:
@@ -343,9 +340,11 @@ chip b:
 
 The above examples assume the mapping between the GPIOs and pins is
 linear. If the mapping is sparse or haphazard, an array of arbitrary pin
-numbers can be encoded in the range like this::
+numbers can be encoded in the range like this:
+
+.. code-block:: c
 
-	static const unsigned range_pins[] = { 14, 1, 22, 17, 10, 8, 6, 2 };
+	static const unsigned int range_pins[] = { 14, 1, 22, 17, 10, 8, 6, 2 };
 
 	static struct pinctrl_gpio_range gpio_range = {
 		.name = "chip",
@@ -353,16 +352,17 @@ numbers can be encoded in the range like this::
 		.base = 32,
 		.pins = &range_pins,
 		.npins = ARRAY_SIZE(range_pins),
-		.gc = &chip;
+		.gc = &chip,
 	};
 
-In this case the pin_base property will be ignored. If the name of a pin
+In this case the ``pin_base`` property will be ignored. If the name of a pin
 group is known, the pins and npins elements of the above structure can be
-initialised using the function pinctrl_get_group_pins(), e.g. for pin
-group "foo"::
+initialised using the function ``pinctrl_get_group_pins()``, e.g. for pin
+group "foo":
 
-	pinctrl_get_group_pins(pctl, "foo", &gpio_range.pins,
-			       &gpio_range.npins);
+.. code-block:: c
+
+	pinctrl_get_group_pins(pctl, "foo", &gpio_range.pins, &gpio_range.npins);
 
 When GPIO-specific functions in the pin control subsystem are called, these
 ranges will be used to look up the appropriate pin controller by inspecting
@@ -378,8 +378,8 @@ will get a pin number into its handled number range. Further it is also passed
 the range ID value, so that the pin controller knows which range it should
 deal with.
 
-Calling pinctrl_add_gpio_range from pinctrl driver is DEPRECATED. Please see
-section 2.1 of Documentation/devicetree/bindings/gpio/gpio.txt on how to bind
+Calling ``pinctrl_add_gpio_range()`` from pinctrl driver is DEPRECATED. Please see
+section 2.1 of ``Documentation/devicetree/bindings/gpio/gpio.txt`` on how to bind
 pinctrl and gpio drivers.
 
 
@@ -466,10 +466,10 @@ in your machine configuration. It is inspired by the clk, GPIO and regulator
 subsystems, so devices will request their mux setting, but it's also possible
 to request a single pin for e.g. GPIO.
 
-Definitions:
+The conventions are:
 
 - FUNCTIONS can be switched in and out by a driver residing with the pin
-  control subsystem in the drivers/pinctrl/* directory of the kernel. The
+  control subsystem in the ``drivers/pinctrl`` directory of the kernel. The
   pin control driver knows the possible functions. In the example above you can
   identify three pinmux functions, one for spi, one for i2c and one for mmc.
 
@@ -515,11 +515,13 @@ Definitions:
   In the example case we can define that this particular machine shall
   use device spi0 with pinmux function fspi0 group gspi0 and i2c0 on function
   fi2c0 group gi2c0, on the primary pin controller, we get mappings
-  like these::
+  like these:
+
+  .. code-block:: c
 
 	{
 		{"map-spi0", spi0, pinctrl0, fspi0, gspi0},
-		{"map-i2c0", i2c0, pinctrl0, fi2c0, gi2c0}
+		{"map-i2c0", i2c0, pinctrl0, fi2c0, gi2c0},
 	}
 
   Every map must be assigned a state name, pin controller, device and
@@ -569,80 +571,51 @@ is possible to perform the requested mux setting, poke the hardware so that
 this happens.
 
 Pinmux drivers are required to supply a few callback functions, some are
-optional. Usually the set_mux() function is implemented, writing values into
+optional. Usually the ``.set_mux()`` function is implemented, writing values into
 some certain registers to activate a certain mux setting for a certain pin.
 
-A simple driver for the above example will work by setting bits 0, 1, 2, 3 or 4
+A simple driver for the above example will work by setting bits 0, 1, 2, 3, 4, or 5
 into some register named MUX to select a certain function with a certain
-group of pins would work something like this::
+group of pins would work something like this:
+
+.. code-block:: c
 
 	#include <linux/pinctrl/pinctrl.h>
 	#include <linux/pinctrl/pinmux.h>
 
-	struct foo_group {
-		const char *name;
-		const unsigned int *pins;
-		const unsigned num_pins;
-	};
-
-	static const unsigned spi0_0_pins[] = { 0, 8, 16, 24 };
-	static const unsigned spi0_1_pins[] = { 38, 46, 54, 62 };
-	static const unsigned i2c0_pins[] = { 24, 25 };
-	static const unsigned mmc0_1_pins[] = { 56, 57 };
-	static const unsigned mmc0_2_pins[] = { 58, 59 };
-	static const unsigned mmc0_3_pins[] = { 60, 61, 62, 63 };
-
-	static const struct foo_group foo_groups[] = {
-		{
-			.name = "spi0_0_grp",
-			.pins = spi0_0_pins,
-			.num_pins = ARRAY_SIZE(spi0_0_pins),
-		},
-		{
-			.name = "spi0_1_grp",
-			.pins = spi0_1_pins,
-			.num_pins = ARRAY_SIZE(spi0_1_pins),
-		},
-		{
-			.name = "i2c0_grp",
-			.pins = i2c0_pins,
-			.num_pins = ARRAY_SIZE(i2c0_pins),
-		},
-		{
-			.name = "mmc0_1_grp",
-			.pins = mmc0_1_pins,
-			.num_pins = ARRAY_SIZE(mmc0_1_pins),
-		},
-		{
-			.name = "mmc0_2_grp",
-			.pins = mmc0_2_pins,
-			.num_pins = ARRAY_SIZE(mmc0_2_pins),
-		},
-		{
-			.name = "mmc0_3_grp",
-			.pins = mmc0_3_pins,
-			.num_pins = ARRAY_SIZE(mmc0_3_pins),
-		},
+	static const unsigned int spi0_0_pins[] = { 0, 8, 16, 24 };
+	static const unsigned int spi0_1_pins[] = { 38, 46, 54, 62 };
+	static const unsigned int i2c0_pins[] = { 24, 25 };
+	static const unsigned int mmc0_1_pins[] = { 56, 57 };
+	static const unsigned int mmc0_2_pins[] = { 58, 59 };
+	static const unsigned int mmc0_3_pins[] = { 60, 61, 62, 63 };
+
+	static const struct pingroup foo_groups[] = {
+		PINCTRL_PINGROUP("spi0_0_grp", spi0_0_pins, ARRAY_SIZE(spi0_0_pins)),
+		PINCTRL_PINGROUP("spi0_1_grp", spi0_1_pins, ARRAY_SIZE(spi0_1_pins)),
+		PINCTRL_PINGROUP("i2c0_grp", i2c0_pins, ARRAY_SIZE(i2c0_pins)),
+		PINCTRL_PINGROUP("mmc0_1_grp", mmc0_1_pins, ARRAY_SIZE(mmc0_1_pins)),
+		PINCTRL_PINGROUP("mmc0_2_grp", mmc0_2_pins, ARRAY_SIZE(mmc0_2_pins)),
+		PINCTRL_PINGROUP("mmc0_3_grp", mmc0_3_pins, ARRAY_SIZE(mmc0_3_pins)),
 	};
 
-
 	static int foo_get_groups_count(struct pinctrl_dev *pctldev)
 	{
 		return ARRAY_SIZE(foo_groups);
 	}
 
 	static const char *foo_get_group_name(struct pinctrl_dev *pctldev,
-					unsigned selector)
+					      unsigned int selector)
 	{
 		return foo_groups[selector].name;
 	}
 
-	static int foo_get_group_pins(struct pinctrl_dev *pctldev, unsigned selector,
-				const unsigned ** pins,
-				unsigned * num_pins)
+	static int foo_get_group_pins(struct pinctrl_dev *pctldev, unsigned int selector,
+				      const unsigned int **pins,
+				      unsigned int *npins)
 	{
-		*pins = (unsigned *) foo_groups[selector].pins;
-		*num_pins = foo_groups[selector].num_pins;
+		*pins = foo_groups[selector].pins;
+		*npins = foo_groups[selector].npins;
 		return 0;
 	}
 
@@ -652,33 +625,14 @@ group of pins would work something like this::
 		.get_group_pins = foo_get_group_pins,
 	};
 
-	struct foo_pmx_func {
-		const char *name;
-		const char * const *groups;
-		const unsigned num_groups;
-	};
-
 	static const char * const spi0_groups[] = { "spi0_0_grp", "spi0_1_grp" };
 	static const char * const i2c0_groups[] = { "i2c0_grp" };
-	static const char * const mmc0_groups[] = { "mmc0_1_grp", "mmc0_2_grp",
-						"mmc0_3_grp" };
+	static const char * const mmc0_groups[] = { "mmc0_1_grp", "mmc0_2_grp", "mmc0_3_grp" };
 
-	static const struct foo_pmx_func foo_functions[] = {
-		{
-			.name = "spi0",
-			.groups = spi0_groups,
-			.num_groups = ARRAY_SIZE(spi0_groups),
-		},
-		{
-			.name = "i2c0",
-			.groups = i2c0_groups,
-			.num_groups = ARRAY_SIZE(i2c0_groups),
-		},
-		{
-			.name = "mmc0",
-			.groups = mmc0_groups,
-			.num_groups = ARRAY_SIZE(mmc0_groups),
-		},
+	static const struct pinfunction foo_functions[] = {
+		PINCTRL_PINFUNCTION("spi0", spi0_groups, ARRAY_SIZE(spi0_groups)),
+		PINCTRL_PINFUNCTION("i2c0", i2c0_groups, ARRAY_SIZE(i2c0_groups)),
+		PINCTRL_PINFUNCTION("mmc0", mmc0_groups, ARRAY_SIZE(mmc0_groups)),
 	};
 
 	static int foo_get_functions_count(struct pinctrl_dev *pctldev)
@@ -686,26 +640,26 @@ group of pins would work something like this::
 		return ARRAY_SIZE(foo_functions);
 	}
 
-	static const char *foo_get_fname(struct pinctrl_dev *pctldev, unsigned selector)
+	static const char *foo_get_fname(struct pinctrl_dev *pctldev, unsigned int selector)
 	{
 		return foo_functions[selector].name;
 	}
 
-	static int foo_get_groups(struct pinctrl_dev *pctldev, unsigned selector,
-				const char * const **groups,
-				unsigned * const num_groups)
+	static int foo_get_groups(struct pinctrl_dev *pctldev, unsigned int selector,
+				  const char * const **groups,
+				  unsigned int * const ngroups)
 	{
 		*groups = foo_functions[selector].groups;
-		*num_groups = foo_functions[selector].num_groups;
+		*ngroups = foo_functions[selector].ngroups;
 		return 0;
 	}
 
-	static int foo_set_mux(struct pinctrl_dev *pctldev, unsigned selector,
-			unsigned group)
+	static int foo_set_mux(struct pinctrl_dev *pctldev, unsigned int selector,
+			       unsigned int group)
 	{
-		u8 regbit = (1 << selector + group);
+		u8 regbit = BIT(group);
 
-		writeb((readb(MUX)|regbit), MUX);
+		writeb((readb(MUX) | regbit), MUX);
 		return 0;
 	}
 
@@ -724,16 +678,17 @@ group of pins would work something like this::
 		.pmxops = &foo_pmxops,
 	};
 
-In the example activating muxing 0 and 1 at the same time setting bits
-0 and 1, uses one pin in common so they would collide.
+In the example activating muxing 0 and 2 at the same time setting bits
+0 and 2, uses pin 24 in common so they would collide. All the same for
+the muxes 1 and 5, which have pin 62 in common.
 
 The beauty of the pinmux subsystem is that since it keeps track of all
 pins and who is using them, it will already have denied an impossible
 request like that, so the driver does not need to worry about such
 things - when it gets a selector passed in, the pinmux subsystem makes
 sure no other device or GPIO assignment is already using the selected
-pins. Thus bits 0 and 1 in the control register will never be set at the
-same time.
+pins. Thus bits 0 and 2, or 1 and 5 in the control register will never
+be set at the same time.
 
 All the above functions are mandatory to implement for a pinmux driver.
 
@@ -742,18 +697,18 @@ Pin control interaction with the GPIO subsystem
 ===============================================
 
 Note that the following implies that the use case is to use a certain pin
-from the Linux kernel using the API in <linux/gpio.h> with gpio_request()
+from the Linux kernel using the API in ``<linux/gpio/consumer.h>`` with gpiod_get()
 and similar functions. There are cases where you may be using something
 that your datasheet calls "GPIO mode", but actually is just an electrical
 configuration for a certain device. See the section below named
-"GPIO mode pitfalls" for more details on this scenario.
+`GPIO mode pitfalls`_ for more details on this scenario.
 
-The public pinmux API contains two functions named pinctrl_gpio_request()
-and pinctrl_gpio_free(). These two functions shall *ONLY* be called from
-gpiolib-based drivers as part of their gpio_request() and
-gpio_free() semantics. Likewise the pinctrl_gpio_direction_[input|output]
-shall only be called from within respective gpio_direction_[input|output]
-gpiolib implementation.
+The public pinmux API contains two functions named ``pinctrl_gpio_request()``
+and ``pinctrl_gpio_free()``. These two functions shall *ONLY* be called from
+gpiolib-based drivers as part of their ``.request()`` and ``.free()`` semantics.
+Likewise the ``pinctrl_gpio_direction_input()`` / ``pinctrl_gpio_direction_output()``
+shall only be called from within respective ``.direction_input()`` /
+``.direction_output()`` gpiolib implementation.
 
 NOTE that platforms and individual drivers shall *NOT* request GPIO pins to be
 controlled e.g. muxed in. Instead, implement a proper gpiolib driver and have
@@ -767,8 +722,8 @@ In this case, the function array would become 64 entries for each GPIO
 setting and then the device functions.
 
 For this reason there are two functions a pin control driver can implement
-to enable only GPIO on an individual pin: .gpio_request_enable() and
-.gpio_disable_free().
+to enable only GPIO on an individual pin: ``.gpio_request_enable()`` and
+``.gpio_disable_free()``.
 
 This function will pass in the affected GPIO range identified by the pin
 controller core, so you know which GPIO pins are being affected by the request
@@ -776,12 +731,12 @@ operation.
 
 If your driver needs to have an indication from the framework of whether the
 GPIO pin shall be used for input or output you can implement the
-.gpio_set_direction() function. As described this shall be called from the
+``.gpio_set_direction()`` function. As described this shall be called from the
 gpiolib driver and the affected GPIO range, pin offset and desired direction
 will be passed along to this function.
 
 Alternatively to using these special functions, it is fully allowed to use
-named functions for each GPIO pin, the pinctrl_gpio_request() will attempt to
+named functions for each GPIO pin, the ``pinctrl_gpio_request()`` will attempt to
 obtain the function "gpioN" where "N" is the global GPIO pin number if no
 special GPIO-handler is registered.
 
@@ -794,7 +749,7 @@ is taken to mean different things than what the kernel does, the developer
 may be confused by a datasheet talking about a pin being possible to set
 into "GPIO mode". It appears that what hardware engineers mean with
 "GPIO mode" is not necessarily the use case that is implied in the kernel
-interface <linux/gpio.h>: a pin that you grab from kernel code and then
+interface ``<linux/gpio/consumer.h>``: a pin that you grab from kernel code and then
 either listen for input or drive high/low to assert/deassert some
 external line.
 
@@ -805,9 +760,10 @@ for a device.
 
 The GPIO portions of a pin and its relation to a certain pin controller
 configuration and muxing logic can be constructed in several ways. Here
-are two examples::
+are two examples.
+
+Example **(A)**::
 
-     (A)
                        pin config
                        logic regs
                        |               +- SPI
@@ -836,9 +792,7 @@ simultaneous access to the same pin from GPIO and pin multiplexing
 consumers on hardware of this type. The pinctrl driver should set this flag
 accordingly.
 
-::
-
-     (B)
+Example **(B)**::
 
                        pin config
                        logic regs
@@ -899,14 +853,14 @@ If you make a 1-to-1 map to the GPIO subsystem for this pin, you may start
 to think that you need to come up with something really complex, that the
 pin shall be used for UART TX and GPIO at the same time, that you will grab
 a pin control handle and set it to a certain state to enable UART TX to be
-muxed in, then twist it over to GPIO mode and use gpio_direction_output()
+muxed in, then twist it over to GPIO mode and use gpiod_direction_output()
 to drive it low during sleep, then mux it over to UART TX again when you
-wake up and maybe even gpio_request/gpio_free as part of this cycle. This
+wake up and maybe even gpiod_get() / gpiod_put() as part of this cycle. This
 all gets very complicated.
 
 The solution is to not think that what the datasheet calls "GPIO mode"
-has to be handled by the <linux/gpio.h> interface. Instead view this as
-a certain pin config setting. Look in e.g. <linux/pinctrl/pinconf-generic.h>
+has to be handled by the ``<linux/gpio/consumer.h>`` interface. Instead view this as
+a certain pin config setting. Look in e.g. ``<linux/pinctrl/pinconf-generic.h>``
 and you find this in the documentation:
 
   PIN_CONFIG_OUTPUT:
@@ -915,7 +869,9 @@ and you find this in the documentation:
 
 So it is perfectly possible to push a pin into "GPIO mode" and drive the
 line low as part of the usual pin control map. So for example your UART
-driver may look like this::
+driver may look like this:
+
+.. code-block:: c
 
 	#include <linux/pinctrl/consumer.h>
 
@@ -928,13 +884,13 @@ driver may look like this::
 
 	/* Normal mode */
 	retval = pinctrl_select_state(pinctrl, pins_default);
+
 	/* Sleep mode */
 	retval = pinctrl_select_state(pinctrl, pins_sleep);
 
 And your machine configuration may look like this:
---------------------------------------------------
 
-::
+.. code-block:: c
 
 	static unsigned long uart_default_mode[] = {
 		PIN_CONF_PACKED(PIN_CONFIG_DRIVE_PUSH_PULL, 0),
@@ -946,16 +902,17 @@ And your machine configuration may look like this:
 
 	static struct pinctrl_map pinmap[] __initdata = {
 		PIN_MAP_MUX_GROUP("uart", PINCTRL_STATE_DEFAULT, "pinctrl-foo",
-			"u0_group", "u0"),
+				  "u0_group", "u0"),
 		PIN_MAP_CONFIGS_PIN("uart", PINCTRL_STATE_DEFAULT, "pinctrl-foo",
-				"UART_TX_PIN", uart_default_mode),
+				    "UART_TX_PIN", uart_default_mode),
 		PIN_MAP_MUX_GROUP("uart", PINCTRL_STATE_SLEEP, "pinctrl-foo",
-			"u0_group", "gpio-mode"),
+				  "u0_group", "gpio-mode"),
 		PIN_MAP_CONFIGS_PIN("uart", PINCTRL_STATE_SLEEP, "pinctrl-foo",
-				"UART_TX_PIN", uart_sleep_mode),
+				    "UART_TX_PIN", uart_sleep_mode),
 	};
 
-	foo_init(void) {
+	foo_init(void)
+	{
 		pinctrl_register_mappings(pinmap, ARRAY_SIZE(pinmap));
 	}
 
@@ -995,7 +952,9 @@ part of this.
 
 A pin controller configuration for a machine looks pretty much like a simple
 regulator configuration, so for the example array above we want to enable i2c
-and spi on the second function mapping::
+and spi on the second function mapping:
+
+.. code-block:: c
 
 	#include <linux/pinctrl/machine.h>
 
@@ -1030,13 +989,17 @@ must match a function provided by the pinmux driver handling this pin range.
 As you can see we may have several pin controllers on the system and thus
 we need to specify which one of them contains the functions we wish to map.
 
-You register this pinmux mapping to the pinmux subsystem by simply::
+You register this pinmux mapping to the pinmux subsystem by simply:
+
+.. code-block:: c
 
        ret = pinctrl_register_mappings(mapping, ARRAY_SIZE(mapping));
 
 Since the above construct is pretty common there is a helper macro to make
 it even more compact which assumes you want to use pinctrl-foo and position
-0 for mapping, for example::
+0 for mapping, for example:
+
+.. code-block:: c
 
 	static struct pinctrl_map mapping[] __initdata = {
 		PIN_MAP_MUX_GROUP("foo-i2c.o", PINCTRL_STATE_DEFAULT,
@@ -1046,7 +1009,9 @@ it even more compact which assumes you want to use pinctrl-foo and position
 The mapping table may also contain pin configuration entries. It's common for
 each pin/group to have a number of configuration entries that affect it, so
 the table entries for configuration reference an array of config parameters
-and values. An example using the convenience macros is shown below::
+and values. An example using the convenience macros is shown below:
+
+.. code-block:: c
 
 	static unsigned long i2c_grp_configs[] = {
 		FOO_PIN_DRIVEN,
@@ -1073,8 +1038,10 @@ Finally, some devices expect the mapping table to contain certain specific
 named states. When running on hardware that doesn't need any pin controller
 configuration, the mapping table must still contain those named states, in
 order to explicitly indicate that the states were provided and intended to
-be empty. Table entry macro PIN_MAP_DUMMY_STATE serves the purpose of defining
-a named state without causing any pin controller to be programmed::
+be empty. Table entry macro ``PIN_MAP_DUMMY_STATE()`` serves the purpose of defining
+a named state without causing any pin controller to be programmed:
+
+.. code-block:: c
 
 	static struct pinctrl_map mapping[] __initdata = {
 		PIN_MAP_DUMMY_STATE("foo-i2c.0", PINCTRL_STATE_DEFAULT),
@@ -1085,7 +1052,9 @@ Complex mappings
 ================
 
 As it is possible to map a function to different groups of pins an optional
-.group can be specified like this::
+.group can be specified like this:
+
+.. code-block:: c
 
 	...
 	{
@@ -1107,13 +1076,15 @@ As it is possible to map a function to different groups of pins an optional
 	...
 
 This example mapping is used to switch between two positions for spi0 at
-runtime, as described further below under the heading "Runtime pinmuxing".
+runtime, as described further below under the heading `Runtime pinmuxing`_.
 
 Further it is possible for one named state to affect the muxing of several
 groups of pins, say for example in the mmc0 example above, where you can
 additively expand the mmc0 bus from 2 to 4 to 8 pins. If we want to use all
-three groups for a total of 2+2+4 = 8 pins (for an 8-bit MMC bus as is the
-case), we define a mapping like this::
+three groups for a total of 2 + 2 + 4 = 8 pins (for an 8-bit MMC bus as is the
+case), we define a mapping like this:
+
+.. code-block:: c
 
 	...
 	{
@@ -1167,13 +1138,17 @@ case), we define a mapping like this::
 	...
 
 The result of grabbing this mapping from the device with something like
-this (see next paragraph)::
+this (see next paragraph):
+
+.. code-block:: c
 
 	p = devm_pinctrl_get(dev);
 	s = pinctrl_lookup_state(p, "8bit");
 	ret = pinctrl_select_state(p, s);
 
-or more simply::
+or more simply:
+
+.. code-block:: c
 
 	p = devm_pinctrl_get_select(dev, "8bit");
 
@@ -1188,7 +1163,7 @@ Pin control requests from drivers
 =================================
 
 When a device driver is about to probe the device core will automatically
-attempt to issue pinctrl_get_select_default() on these devices.
+attempt to issue ``pinctrl_get_select_default()`` on these devices.
 This way driver writers do not need to add any of the boilerplate code
 of the type found below. However when doing fine-grained state selection
 and not using the "default" state, you may have to do some device driver
@@ -1206,12 +1181,14 @@ some cases where a driver needs to e.g. switch between different mux mappings
 at runtime this is not possible.
 
 A typical case is if a driver needs to switch bias of pins from normal
-operation and going to sleep, moving from the PINCTRL_STATE_DEFAULT to
-PINCTRL_STATE_SLEEP at runtime, re-biasing or even re-muxing pins to save
+operation and going to sleep, moving from the ``PINCTRL_STATE_DEFAULT`` to
+``PINCTRL_STATE_SLEEP`` at runtime, re-biasing or even re-muxing pins to save
 current in sleep mode.
 
 A driver may request a certain control state to be activated, usually just the
-default state like this::
+default state like this:
+
+.. code-block:: c
 
 	#include <linux/pinctrl/consumer.h>
 
@@ -1251,49 +1228,49 @@ arrangement on your bus.
 
 The semantics of the pinctrl APIs are:
 
-- pinctrl_get() is called in process context to obtain a handle to all pinctrl
+- ``pinctrl_get()`` is called in process context to obtain a handle to all pinctrl
   information for a given client device. It will allocate a struct from the
   kernel memory to hold the pinmux state. All mapping table parsing or similar
   slow operations take place within this API.
 
-- devm_pinctrl_get() is a variant of pinctrl_get() that causes pinctrl_put()
+- ``devm_pinctrl_get()`` is a variant of pinctrl_get() that causes ``pinctrl_put()``
   to be called automatically on the retrieved pointer when the associated
   device is removed. It is recommended to use this function over plain
-  pinctrl_get().
+  ``pinctrl_get()``.
 
-- pinctrl_lookup_state() is called in process context to obtain a handle to a
+- ``pinctrl_lookup_state()`` is called in process context to obtain a handle to a
   specific state for a client device. This operation may be slow, too.
 
-- pinctrl_select_state() programs pin controller hardware according to the
+- ``pinctrl_select_state()`` programs pin controller hardware according to the
   definition of the state as given by the mapping table. In theory, this is a
   fast-path operation, since it only involved blasting some register settings
   into hardware. However, note that some pin controllers may have their
   registers on a slow/IRQ-based bus, so client devices should not assume they
-  can call pinctrl_select_state() from non-blocking contexts.
+  can call ``pinctrl_select_state()`` from non-blocking contexts.
 
-- pinctrl_put() frees all information associated with a pinctrl handle.
+- ``pinctrl_put()`` frees all information associated with a pinctrl handle.
 
-- devm_pinctrl_put() is a variant of pinctrl_put() that may be used to
-  explicitly destroy a pinctrl object returned by devm_pinctrl_get().
+- ``devm_pinctrl_put()`` is a variant of ``pinctrl_put()`` that may be used to
+  explicitly destroy a pinctrl object returned by ``devm_pinctrl_get()``.
   However, use of this function will be rare, due to the automatic cleanup
   that will occur even without calling it.
 
-  pinctrl_get() must be paired with a plain pinctrl_put().
-  pinctrl_get() may not be paired with devm_pinctrl_put().
-  devm_pinctrl_get() can optionally be paired with devm_pinctrl_put().
-  devm_pinctrl_get() may not be paired with plain pinctrl_put().
+  ``pinctrl_get()`` must be paired with a plain ``pinctrl_put()``.
+  ``pinctrl_get()`` may not be paired with ``devm_pinctrl_put()``.
+  ``devm_pinctrl_get()`` can optionally be paired with ``devm_pinctrl_put()``.
+  ``devm_pinctrl_get()`` may not be paired with plain ``pinctrl_put()``.
 
 Usually the pin control core handled the get/put pair and call out to the
 device drivers bookkeeping operations, like checking available functions and
-the associated pins, whereas select_state pass on to the pin controller
+the associated pins, whereas ``pinctrl_select_state()`` pass on to the pin controller
 driver which takes care of activating and/or deactivating the mux setting by
 quickly poking some registers.
 
-The pins are allocated for your device when you issue the devm_pinctrl_get()
+The pins are allocated for your device when you issue the ``devm_pinctrl_get()``
 call, after this you should be able to see this in the debugfs listing of all
 pins.
 
-NOTE: the pinctrl system will return -EPROBE_DEFER if it cannot find the
+NOTE: the pinctrl system will return ``-EPROBE_DEFER`` if it cannot find the
 requested pinctrl handles, for example if the pinctrl driver has not yet
 registered. Thus make sure that the error path in your driver gracefully
 cleans up and is ready to retry the probing later in the startup process.
@@ -1305,18 +1282,20 @@ Drivers needing both pin control and GPIOs
 Again, it is discouraged to let drivers lookup and select pin control states
 themselves, but again sometimes this is unavoidable.
 
-So say that your driver is fetching its resources like this::
+So say that your driver is fetching its resources like this:
+
+.. code-block:: c
 
 	#include <linux/pinctrl/consumer.h>
-	#include <linux/gpio.h>
+	#include <linux/gpio/consumer.h>
 
 	struct pinctrl *pinctrl;
-	int gpio;
+	struct gpio_desc *gpio;
 
 	pinctrl = devm_pinctrl_get_select_default(&dev);
-	gpio = devm_gpio_request(&dev, 14, "foo");
+	gpio = devm_gpiod_get(&dev, "foo");
 
-Here we first request a certain pin state and then request GPIO 14 to be
+Here we first request a certain pin state and then request GPIO "foo" to be
 used. If you're using the subsystems orthogonally like this, you should
 nominally always get your pinctrl handle and select the desired pinctrl
 state BEFORE requesting the GPIO. This is a semantic convention to avoid
@@ -1331,9 +1310,9 @@ probing, nevertheless orthogonal to the GPIO subsystem.
 But there are also situations where it makes sense for the GPIO subsystem
 to communicate directly with the pinctrl subsystem, using the latter as a
 back-end. This is when the GPIO driver may call out to the functions
-described in the section "Pin control interaction with the GPIO subsystem"
+described in the section `Pin control interaction with the GPIO subsystem`_
 above. This only involves per-pin multiplexing, and will be completely
-hidden behind the gpio_*() function namespace. In this case, the driver
+hidden behind the gpiod_*() function namespace. In this case, the driver
 need not interact with the pin control subsystem at all.
 
 If a pin control driver and a GPIO driver is dealing with the same pins
@@ -1348,12 +1327,14 @@ System pin control hogging
 ==========================
 
 Pin control map entries can be hogged by the core when the pin controller
-is registered. This means that the core will attempt to call pinctrl_get(),
-lookup_state() and select_state() on it immediately after the pin control
-device has been registered.
+is registered. This means that the core will attempt to call ``pinctrl_get()``,
+``pinctrl_lookup_state()`` and ``pinctrl_select_state()`` on it immediately after
+the pin control device has been registered.
 
 This occurs for mapping table entries where the client device name is equal
-to the pin controller device name, and the state name is PINCTRL_STATE_DEFAULT::
+to the pin controller device name, and the state name is ``PINCTRL_STATE_DEFAULT``:
+
+.. code-block:: c
 
 	{
 		.dev_name = "pinctrl-foo",
@@ -1365,7 +1346,9 @@ to the pin controller device name, and the state name is PINCTRL_STATE_DEFAULT::
 
 Since it may be common to request the core to hog a few always-applicable
 mux settings on the primary pin controller, there is a convenience macro for
-this::
+this:
+
+.. code-block:: c
 
 	PIN_MAP_MUX_GROUP_HOG_DEFAULT("pinctrl-foo", NULL /* group */,
 				      "power_func")
@@ -1385,7 +1368,9 @@ function, but with different named in the mapping as described under
 
 This snippet first initializes a state object for both groups (in foo_probe()),
 then muxes the function in the pins defined by group A, and finally muxes it in
-on the pins defined by group B::
+on the pins defined by group B:
+
+.. code-block:: c
 
 	#include <linux/pinctrl/consumer.h>
 
@@ -1413,14 +1398,14 @@ on the pins defined by group B::
 		/* Enable on position A */
 		ret = pinctrl_select_state(p, s1);
 		if (ret < 0)
-		...
+			...
 
 		...
 
 		/* Enable on position B */
 		ret = pinctrl_select_state(p, s2);
 		if (ret < 0)
-		...
+			...
 
 		...
 	}
@@ -1432,6 +1417,7 @@ can be used by different functions at different times on a running system.
 
 Debugfs files
 =============
+
 These files are created in ``/sys/kernel/debug/pinctrl``:
 
 - ``pinctrl-devices``: prints each pin controller device along with columns to
@@ -1440,7 +1426,7 @@ These files are created in ``/sys/kernel/debug/pinctrl``:
 - ``pinctrl-handles``: prints each configured pin controller handle and the
   corresponding pinmux maps
 
-- ``pinctrl-maps``: print all pinctrl maps
+- ``pinctrl-maps``: prints all pinctrl maps
 
 A sub-directory is created inside of ``/sys/kernel/debug/pinctrl`` for each pin
 controller device containing these files:
@@ -1448,20 +1434,22 @@ controller device containing these files:
 - ``pins``: prints a line for each pin registered on the pin controller. The
   pinctrl driver may add additional information such as register contents.
 
-- ``gpio-ranges``: print ranges that map gpio lines to pins on the controller
+- ``gpio-ranges``: prints ranges that map gpio lines to pins on the controller
 
-- ``pingroups``: print all pin groups registered on the pin controller
+- ``pingroups``: prints all pin groups registered on the pin controller
 
-- ``pinconf-pins``: print pin config settings for each pin
+- ``pinconf-pins``: prints pin config settings for each pin
 
-- ``pinconf-groups``: print pin config settings per pin group
+- ``pinconf-groups``: prints pin config settings per pin group
 
-- ``pinmux-functions``: print each pin function along with the pin groups that
+- ``pinmux-functions``: prints each pin function along with the pin groups that
   map to the pin function
 
-- ``pinmux-pins``: iterate through all pins and print mux owner, gpio owner
+- ``pinmux-pins``: iterates through all pins and prints mux owner, gpio owner
   and if the pin is a hog
 
-- ``pinmux-select``: write to this file to activate a pin function for a group::
+- ``pinmux-select``: write to this file to activate a pin function for a group:
+
+  .. code-block:: sh
 
         echo "<group-name function-name>" > pinmux-select
diff --git a/drivers/pinctrl/intel/pinctrl-alderlake.c b/drivers/pinctrl/intel/pinctrl-alderlake.c
index 427febe09b69..55bbfd647ba4 100644
--- a/drivers/pinctrl/intel/pinctrl-alderlake.c
+++ b/drivers/pinctrl/intel/pinctrl-alderlake.c
@@ -34,25 +34,11 @@
 		.gpio_base = (g),			\
 	}
 
-#define ADL_COMMUNITY(b, s, e, g, v)				\
-	{							\
-		.barno = (b),					\
-		.padown_offset = ADL_##v##_PAD_OWN,		\
-		.padcfglock_offset = ADL_##v##_PADCFGLOCK,	\
-		.hostown_offset = ADL_##v##_HOSTSW_OWN,		\
-		.is_offset = ADL_##v##_GPI_IS,			\
-		.ie_offset = ADL_##v##_GPI_IE,			\
-		.pin_base = (s),				\
-		.npins = ((e) - (s) + 1),			\
-		.gpps = (g),					\
-		.ngpps = ARRAY_SIZE(g),				\
-	}
-
 #define ADL_N_COMMUNITY(b, s, e, g)			\
-	ADL_COMMUNITY(b, s, e, g, N)
+	INTEL_COMMUNITY_GPPS(b, s, e, g, ADL_N)
 
 #define ADL_S_COMMUNITY(b, s, e, g)			\
-	ADL_COMMUNITY(b, s, e, g, S)
+	INTEL_COMMUNITY_GPPS(b, s, e, g, ADL_S)
 
 /* Alder Lake-N */
 static const struct pinctrl_pin_desc adln_pins[] = {
diff --git a/drivers/pinctrl/intel/pinctrl-baytrail.c b/drivers/pinctrl/intel/pinctrl-baytrail.c
index 67db79f38051..770a2723ef81 100644
--- a/drivers/pinctrl/intel/pinctrl-baytrail.c
+++ b/drivers/pinctrl/intel/pinctrl-baytrail.c
@@ -637,18 +637,18 @@ static const char *byt_get_function_name(struct pinctrl_dev *pctldev,
 {
 	struct intel_pinctrl *vg = pinctrl_dev_get_drvdata(pctldev);
 
-	return vg->soc->functions[selector].name;
+	return vg->soc->functions[selector].func.name;
 }
 
 static int byt_get_function_groups(struct pinctrl_dev *pctldev,
 				   unsigned int selector,
 				   const char * const **groups,
-				   unsigned int *num_groups)
+				   unsigned int *ngroups)
 {
 	struct intel_pinctrl *vg = pinctrl_dev_get_drvdata(pctldev);
 
-	*groups		= vg->soc->functions[selector].groups;
-	*num_groups	= vg->soc->functions[selector].ngroups;
+	*groups		= vg->soc->functions[selector].func.groups;
+	*ngroups	= vg->soc->functions[selector].func.ngroups;
 
 	return 0;
 }
@@ -722,7 +722,7 @@ static int byt_set_mux(struct pinctrl_dev *pctldev, unsigned int func_selector,
 
 	if (group.modes)
 		byt_set_group_mixed_mux(vg, group, group.modes);
-	else if (!strcmp(func.name, "gpio"))
+	else if (!strcmp(func.func.name, "gpio"))
 		byt_set_group_simple_mux(vg, group, BYT_DEFAULT_GPIO_MUX);
 	else
 		byt_set_group_simple_mux(vg, group, group.mode);
diff --git a/drivers/pinctrl/intel/pinctrl-broxton.c b/drivers/pinctrl/intel/pinctrl-broxton.c
index fb15cd10a32f..77e921b2178d 100644
--- a/drivers/pinctrl/intel/pinctrl-broxton.c
+++ b/drivers/pinctrl/intel/pinctrl-broxton.c
@@ -20,17 +20,8 @@
 #define BXT_GPI_IS	0x100
 #define BXT_GPI_IE	0x110
 
-#define BXT_COMMUNITY(s, e)				\
-	{						\
-		.padown_offset = BXT_PAD_OWN,		\
-		.padcfglock_offset = BXT_PADCFGLOCK,	\
-		.hostown_offset = BXT_HOSTSW_OWN,	\
-		.is_offset = BXT_GPI_IS,		\
-		.ie_offset = BXT_GPI_IE,		\
-		.gpp_size = 32,                         \
-		.pin_base = (s),			\
-		.npins = ((e) - (s) + 1),		\
-	}
+#define BXT_COMMUNITY(b, s, e)				\
+	INTEL_COMMUNITY_SIZE(b, s, e, 32, 4, BXT)
 
 /* BXT */
 static const struct pinctrl_pin_desc bxt_north_pins[] = {
@@ -172,7 +163,7 @@ static const struct intel_function bxt_north_functions[] = {
 };
 
 static const struct intel_community bxt_north_communities[] = {
-	BXT_COMMUNITY(0, 82),
+	BXT_COMMUNITY(0, 0, 82),
 };
 
 static const struct intel_pinctrl_soc_data bxt_north_soc_data = {
@@ -289,7 +280,7 @@ static const struct intel_function bxt_northwest_functions[] = {
 };
 
 static const struct intel_community bxt_northwest_communities[] = {
-	BXT_COMMUNITY(0, 71),
+	BXT_COMMUNITY(0, 0, 71),
 };
 
 static const struct intel_pinctrl_soc_data bxt_northwest_soc_data = {
@@ -396,7 +387,7 @@ static const struct intel_function bxt_west_functions[] = {
 };
 
 static const struct intel_community bxt_west_communities[] = {
-	BXT_COMMUNITY(0, 41),
+	BXT_COMMUNITY(0, 0, 41),
 };
 
 static const struct intel_pinctrl_soc_data bxt_west_soc_data = {
@@ -472,7 +463,7 @@ static const struct intel_function bxt_southwest_functions[] = {
 };
 
 static const struct intel_community bxt_southwest_communities[] = {
-	BXT_COMMUNITY(0, 30),
+	BXT_COMMUNITY(0, 0, 30),
 };
 
 static const struct intel_pinctrl_soc_data bxt_southwest_soc_data = {
@@ -511,7 +502,7 @@ static const struct pinctrl_pin_desc bxt_south_pins[] = {
 };
 
 static const struct intel_community bxt_south_communities[] = {
-	BXT_COMMUNITY(0, 19),
+	BXT_COMMUNITY(0, 0, 19),
 };
 
 static const struct intel_pinctrl_soc_data bxt_south_soc_data = {
@@ -650,7 +641,7 @@ static const struct intel_function apl_north_functions[] = {
 };
 
 static const struct intel_community apl_north_communities[] = {
-	BXT_COMMUNITY(0, 77),
+	BXT_COMMUNITY(0, 0, 77),
 };
 
 static const struct intel_pinctrl_soc_data apl_north_soc_data = {
@@ -770,7 +761,7 @@ static const struct intel_function apl_northwest_functions[] = {
 };
 
 static const struct intel_community apl_northwest_communities[] = {
-	BXT_COMMUNITY(0, 76),
+	BXT_COMMUNITY(0, 0, 76),
 };
 
 static const struct intel_pinctrl_soc_data apl_northwest_soc_data = {
@@ -880,7 +871,7 @@ static const struct intel_function apl_west_functions[] = {
 };
 
 static const struct intel_community apl_west_communities[] = {
-	BXT_COMMUNITY(0, 46),
+	BXT_COMMUNITY(0, 0, 46),
 };
 
 static const struct intel_pinctrl_soc_data apl_west_soc_data = {
@@ -972,7 +963,7 @@ static const struct intel_function apl_southwest_functions[] = {
 };
 
 static const struct intel_community apl_southwest_communities[] = {
-	BXT_COMMUNITY(0, 42),
+	BXT_COMMUNITY(0, 0, 42),
 };
 
 static const struct intel_pinctrl_soc_data apl_southwest_soc_data = {
diff --git a/drivers/pinctrl/intel/pinctrl-cannonlake.c b/drivers/pinctrl/intel/pinctrl-cannonlake.c
index f8a8b9b14de9..88142ec57b25 100644
--- a/drivers/pinctrl/intel/pinctrl-cannonlake.c
+++ b/drivers/pinctrl/intel/pinctrl-cannonlake.c
@@ -15,12 +15,17 @@
 
 #include "pinctrl-intel.h"
 
-#define CNL_PAD_OWN		0x020
-#define CNL_PADCFGLOCK		0x080
+#define CNL_LP_PAD_OWN		0x020
+#define CNL_LP_PADCFGLOCK	0x080
 #define CNL_LP_HOSTSW_OWN	0x0b0
+#define CNL_LP_GPI_IS		0x100
+#define CNL_LP_GPI_IE		0x120
+
+#define CNL_H_PAD_OWN		0x020
+#define CNL_H_PADCFGLOCK	0x080
 #define CNL_H_HOSTSW_OWN	0x0c0
-#define CNL_GPI_IS		0x100
-#define CNL_GPI_IE		0x120
+#define CNL_H_GPI_IS		0x100
+#define CNL_H_GPI_IE		0x120
 
 #define CNL_GPP(r, s, e, g)				\
 	{						\
@@ -30,25 +35,11 @@
 		.gpio_base = (g),			\
 	}
 
-#define CNL_COMMUNITY(b, s, e, g, v)			\
-	{						\
-		.barno = (b),				\
-		.padown_offset = CNL_PAD_OWN,		\
-		.padcfglock_offset = CNL_PADCFGLOCK,	\
-		.hostown_offset = CNL_##v##_HOSTSW_OWN,	\
-		.is_offset = CNL_GPI_IS,		\
-		.ie_offset = CNL_GPI_IE,		\
-		.pin_base = (s),			\
-		.npins = ((e) - (s) + 1),		\
-		.gpps = (g),				\
-		.ngpps = ARRAY_SIZE(g),			\
-	}
-
 #define CNL_LP_COMMUNITY(b, s, e, g)			\
-	CNL_COMMUNITY(b, s, e, g, LP)
+	INTEL_COMMUNITY_GPPS(b, s, e, g, CNL_LP)
 
 #define CNL_H_COMMUNITY(b, s, e, g)			\
-	CNL_COMMUNITY(b, s, e, g, H)
+	INTEL_COMMUNITY_GPPS(b, s, e, g, CNL_H)
 
 /* Cannon Lake-H */
 static const struct pinctrl_pin_desc cnlh_pins[] = {
diff --git a/drivers/pinctrl/intel/pinctrl-cedarfork.c b/drivers/pinctrl/intel/pinctrl-cedarfork.c
index aa6f9040d3d8..2ab52b1fbc59 100644
--- a/drivers/pinctrl/intel/pinctrl-cedarfork.c
+++ b/drivers/pinctrl/intel/pinctrl-cedarfork.c
@@ -28,18 +28,7 @@
 	}
 
 #define CDF_COMMUNITY(b, s, e, g)			\
-	{						\
-		.barno = (b),				\
-		.padown_offset = CDF_PAD_OWN,		\
-		.padcfglock_offset = CDF_PADCFGLOCK,	\
-		.hostown_offset = CDF_HOSTSW_OWN,	\
-		.is_offset = CDF_GPI_IS,		\
-		.ie_offset = CDF_GPI_IE,		\
-		.pin_base = (s),			\
-		.npins = ((e) - (s) + 1),		\
-		.gpps = (g),				\
-		.ngpps = ARRAY_SIZE(g),			\
-	}
+	INTEL_COMMUNITY_GPPS(b, s, e, g, CDF)
 
 /* Cedar Fork PCH */
 static const struct pinctrl_pin_desc cdf_pins[] = {
diff --git a/drivers/pinctrl/intel/pinctrl-cherryview.c b/drivers/pinctrl/intel/pinctrl-cherryview.c
index 11b81213922d..722990e27836 100644
--- a/drivers/pinctrl/intel/pinctrl-cherryview.c
+++ b/drivers/pinctrl/intel/pinctrl-cherryview.c
@@ -694,7 +694,7 @@ static const char *chv_get_function_name(struct pinctrl_dev *pctldev,
 {
 	struct intel_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
 
-	return pctrl->soc->functions[function].name;
+	return pctrl->soc->functions[function].func.name;
 }
 
 static int chv_get_function_groups(struct pinctrl_dev *pctldev,
@@ -704,8 +704,8 @@ static int chv_get_function_groups(struct pinctrl_dev *pctldev,
 {
 	struct intel_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
 
-	*groups = pctrl->soc->functions[function].groups;
-	*ngroups = pctrl->soc->functions[function].ngroups;
+	*groups = pctrl->soc->functions[function].func.groups;
+	*ngroups = pctrl->soc->functions[function].func.ngroups;
 	return 0;
 }
 
diff --git a/drivers/pinctrl/intel/pinctrl-denverton.c b/drivers/pinctrl/intel/pinctrl-denverton.c
index f26d030b9b41..c1a9db091c6e 100644
--- a/drivers/pinctrl/intel/pinctrl-denverton.c
+++ b/drivers/pinctrl/intel/pinctrl-denverton.c
@@ -28,18 +28,7 @@
 	}
 
 #define DNV_COMMUNITY(b, s, e, g)			\
-	{						\
-		.barno = (b),				\
-		.padown_offset = DNV_PAD_OWN,		\
-		.padcfglock_offset = DNV_PADCFGLOCK,	\
-		.hostown_offset = DNV_HOSTSW_OWN,	\
-		.is_offset = DNV_GPI_IS,		\
-		.ie_offset = DNV_GPI_IE,		\
-		.pin_base = (s),			\
-		.npins = ((e) - (s) + 1),		\
-		.gpps = (g),				\
-		.ngpps = ARRAY_SIZE(g),			\
-	}
+	INTEL_COMMUNITY_GPPS(b, s, e, g, DNV)
 
 /* Denverton */
 static const struct pinctrl_pin_desc dnv_pins[] = {
diff --git a/drivers/pinctrl/intel/pinctrl-elkhartlake.c b/drivers/pinctrl/intel/pinctrl-elkhartlake.c
index 4702bdfa10e3..64b1997df0be 100644
--- a/drivers/pinctrl/intel/pinctrl-elkhartlake.c
+++ b/drivers/pinctrl/intel/pinctrl-elkhartlake.c
@@ -27,18 +27,8 @@
 		.size = ((e) - (s) + 1),		\
 	}
 
-#define EHL_COMMUNITY(s, e, g)				\
-	{						\
-		.padown_offset = EHL_PAD_OWN,		\
-		.padcfglock_offset = EHL_PADCFGLOCK,	\
-		.hostown_offset = EHL_HOSTSW_OWN,	\
-		.is_offset = EHL_GPI_IS,		\
-		.ie_offset = EHL_GPI_IE,		\
-		.pin_base = (s),			\
-		.npins = ((e) - (s) + 1),		\
-		.gpps = (g),				\
-		.ngpps = ARRAY_SIZE(g),			\
-	}
+#define EHL_COMMUNITY(b, s, e, g)			\
+	INTEL_COMMUNITY_GPPS(b, s, e, g, EHL)
 
 /* Elkhart Lake */
 static const struct pinctrl_pin_desc ehl_community0_pins[] = {
@@ -121,7 +111,7 @@ static const struct intel_padgroup ehl_community0_gpps[] = {
 };
 
 static const struct intel_community ehl_community0[] = {
-	EHL_COMMUNITY(0, 66, ehl_community0_gpps),
+	EHL_COMMUNITY(0, 0, 66, ehl_community0_gpps),
 };
 
 static const struct intel_pinctrl_soc_data ehl_community0_soc_data = {
@@ -262,7 +252,7 @@ static const struct intel_padgroup ehl_community1_gpps[] = {
 };
 
 static const struct intel_community ehl_community1[] = {
-	EHL_COMMUNITY(0, 112, ehl_community1_gpps),
+	EHL_COMMUNITY(0, 0, 112, ehl_community1_gpps),
 };
 
 static const struct intel_pinctrl_soc_data ehl_community1_soc_data = {
@@ -335,7 +325,7 @@ static const struct intel_padgroup ehl_community3_gpps[] = {
 };
 
 static const struct intel_community ehl_community3[] = {
-	EHL_COMMUNITY(0, 46, ehl_community3_gpps),
+	EHL_COMMUNITY(0, 0, 46, ehl_community3_gpps),
 };
 
 static const struct intel_pinctrl_soc_data ehl_community3_soc_data = {
@@ -441,7 +431,7 @@ static const struct intel_padgroup ehl_community4_gpps[] = {
 };
 
 static const struct intel_community ehl_community4[] = {
-	EHL_COMMUNITY(0, 79, ehl_community4_gpps),
+	EHL_COMMUNITY(0, 0, 79, ehl_community4_gpps),
 };
 
 static const struct intel_pinctrl_soc_data ehl_community4_soc_data = {
@@ -469,7 +459,7 @@ static const struct intel_padgroup ehl_community5_gpps[] = {
 };
 
 static const struct intel_community ehl_community5[] = {
-	EHL_COMMUNITY(0, 7, ehl_community5_gpps),
+	EHL_COMMUNITY(0, 0, 7, ehl_community5_gpps),
 };
 
 static const struct intel_pinctrl_soc_data ehl_community5_soc_data = {
diff --git a/drivers/pinctrl/intel/pinctrl-emmitsburg.c b/drivers/pinctrl/intel/pinctrl-emmitsburg.c
index f6114dbf7520..cc8f0baabc91 100644
--- a/drivers/pinctrl/intel/pinctrl-emmitsburg.c
+++ b/drivers/pinctrl/intel/pinctrl-emmitsburg.c
@@ -28,18 +28,7 @@
 	}
 
 #define EBG_COMMUNITY(b, s, e, g)			\
-	{						\
-		.barno = (b),				\
-		.padown_offset = EBG_PAD_OWN,		\
-		.padcfglock_offset = EBG_PADCFGLOCK,	\
-		.hostown_offset = EBG_HOSTSW_OWN,	\
-		.is_offset = EBG_GPI_IS,		\
-		.ie_offset = EBG_GPI_IE,		\
-		.pin_base = (s),			\
-		.npins = ((e) - (s) + 1),		\
-		.gpps = (g),				\
-		.ngpps = ARRAY_SIZE(g),			\
-	}
+	INTEL_COMMUNITY_GPPS(b, s, e, g, EBG)
 
 /* Emmitsburg */
 static const struct pinctrl_pin_desc ebg_pins[] = {
diff --git a/drivers/pinctrl/intel/pinctrl-geminilake.c b/drivers/pinctrl/intel/pinctrl-geminilake.c
index df02028b40f3..918cc9f261cf 100644
--- a/drivers/pinctrl/intel/pinctrl-geminilake.c
+++ b/drivers/pinctrl/intel/pinctrl-geminilake.c
@@ -20,17 +20,8 @@
 #define GLK_GPI_IS	0x100
 #define GLK_GPI_IE	0x110
 
-#define GLK_COMMUNITY(s, e)				\
-	{						\
-		.padown_offset = GLK_PAD_OWN,		\
-		.padcfglock_offset = GLK_PADCFGLOCK,	\
-		.hostown_offset = GLK_HOSTSW_OWN,	\
-		.is_offset = GLK_GPI_IS,		\
-		.ie_offset = GLK_GPI_IE,		\
-		.gpp_size = 32,                         \
-		.pin_base = (s),			\
-		.npins = ((e) - (s) + 1),		\
-	}
+#define GLK_COMMUNITY(b, s, e)				\
+	INTEL_COMMUNITY_SIZE(b, s, e, 32, 4, GLK)
 
 /* GLK */
 static const struct pinctrl_pin_desc glk_northwest_pins[] = {
@@ -173,7 +164,7 @@ static const struct intel_function glk_northwest_functions[] = {
 };
 
 static const struct intel_community glk_northwest_communities[] = {
-	GLK_COMMUNITY(0, 79),
+	GLK_COMMUNITY(0, 0, 79),
 };
 
 static const struct intel_pinctrl_soc_data glk_northwest_soc_data = {
@@ -306,7 +297,7 @@ static const struct intel_function glk_north_functions[] = {
 };
 
 static const struct intel_community glk_north_communities[] = {
-	GLK_COMMUNITY(0, 79),
+	GLK_COMMUNITY(0, 0, 79),
 };
 
 static const struct intel_pinctrl_soc_data glk_north_soc_data = {
@@ -345,7 +336,7 @@ static const struct pinctrl_pin_desc glk_audio_pins[] = {
 };
 
 static const struct intel_community glk_audio_communities[] = {
-	GLK_COMMUNITY(0, 19),
+	GLK_COMMUNITY(0, 0, 19),
 };
 
 static const struct intel_pinctrl_soc_data glk_audio_soc_data = {
@@ -427,7 +418,7 @@ static const struct intel_function glk_scc_functions[] = {
 };
 
 static const struct intel_community glk_scc_communities[] = {
-	GLK_COMMUNITY(0, 34),
+	GLK_COMMUNITY(0, 0, 34),
 };
 
 static const struct intel_pinctrl_soc_data glk_scc_soc_data = {
diff --git a/drivers/pinctrl/intel/pinctrl-icelake.c b/drivers/pinctrl/intel/pinctrl-icelake.c
index 84a56d9ae47e..1c64b4a1c491 100644
--- a/drivers/pinctrl/intel/pinctrl-icelake.c
+++ b/drivers/pinctrl/intel/pinctrl-icelake.c
@@ -15,12 +15,17 @@
 
 #include "pinctrl-intel.h"
 
-#define ICL_PAD_OWN	0x020
-#define ICL_PADCFGLOCK	0x080
-#define ICL_HOSTSW_OWN	0x0b0
-#define ICL_GPI_IS	0x100
-#define ICL_LP_GPI_IE	0x110
-#define ICL_N_GPI_IE	0x120
+#define ICL_LP_PAD_OWN		0x020
+#define ICL_LP_PADCFGLOCK	0x080
+#define ICL_LP_HOSTSW_OWN	0x0b0
+#define ICL_LP_GPI_IS		0x100
+#define ICL_LP_GPI_IE		0x110
+
+#define ICL_N_PAD_OWN		0x020
+#define ICL_N_PADCFGLOCK	0x080
+#define ICL_N_HOSTSW_OWN	0x0b0
+#define ICL_N_GPI_IS		0x100
+#define ICL_N_GPI_IE		0x120
 
 #define ICL_GPP(r, s, e, g)				\
 	{						\
@@ -30,25 +35,11 @@
 		.gpio_base = (g),			\
 	}
 
-#define ICL_COMMUNITY(b, s, e, g, v)			\
-	{						\
-		.barno = (b),				\
-		.padown_offset = ICL_PAD_OWN,		\
-		.padcfglock_offset = ICL_PADCFGLOCK,	\
-		.hostown_offset = ICL_HOSTSW_OWN,	\
-		.is_offset = ICL_GPI_IS,		\
-		.ie_offset = ICL_##v##_GPI_IE,		\
-		.pin_base = (s),			\
-		.npins = ((e) - (s) + 1),		\
-		.gpps = (g),				\
-		.ngpps = ARRAY_SIZE(g),			\
-	}
-
 #define ICL_LP_COMMUNITY(b, s, e, g)			\
-	ICL_COMMUNITY(b, s, e, g, LP)
+	INTEL_COMMUNITY_GPPS(b, s, e, g, ICL_LP)
 
 #define ICL_N_COMMUNITY(b, s, e, g)			\
-	ICL_COMMUNITY(b, s, e, g, N)
+	INTEL_COMMUNITY_GPPS(b, s, e, g, ICL_N)
 
 /* Ice Lake-LP */
 static const struct pinctrl_pin_desc icllp_pins[] = {
diff --git a/drivers/pinctrl/intel/pinctrl-intel.c b/drivers/pinctrl/intel/pinctrl-intel.c
index cc3aaba24188..1bb2a0bb65db 100644
--- a/drivers/pinctrl/intel/pinctrl-intel.c
+++ b/drivers/pinctrl/intel/pinctrl-intel.c
@@ -81,13 +81,16 @@
 #define PADCFG1_TERM_MASK		GENMASK(12, 10)
 #define PADCFG1_TERM_20K		BIT(2)
 #define PADCFG1_TERM_5K			BIT(1)
+#define PADCFG1_TERM_4K			(BIT(2) | BIT(1))
 #define PADCFG1_TERM_1K			BIT(0)
+#define PADCFG1_TERM_952		(BIT(2) | BIT(0))
 #define PADCFG1_TERM_833		(BIT(1) | BIT(0))
+#define PADCFG1_TERM_800		(BIT(2) | BIT(1) | BIT(0))
 
 #define PADCFG2				0x008
-#define PADCFG2_DEBEN			BIT(0)
 #define PADCFG2_DEBOUNCE_SHIFT		1
 #define PADCFG2_DEBOUNCE_MASK		GENMASK(4, 1)
+#define PADCFG2_DEBEN			BIT(0)
 
 #define DEBOUNCE_PERIOD_NSEC		31250
 
@@ -369,7 +372,7 @@ static const char *intel_get_function_name(struct pinctrl_dev *pctldev,
 {
 	struct intel_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
 
-	return pctrl->soc->functions[function].name;
+	return pctrl->soc->functions[function].func.name;
 }
 
 static int intel_get_function_groups(struct pinctrl_dev *pctldev,
@@ -379,8 +382,8 @@ static int intel_get_function_groups(struct pinctrl_dev *pctldev,
 {
 	struct intel_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
 
-	*groups = pctrl->soc->functions[function].groups;
-	*ngroups = pctrl->soc->functions[function].ngroups;
+	*groups = pctrl->soc->functions[function].func.groups;
+	*ngroups = pctrl->soc->functions[function].func.ngroups;
 	return 0;
 }
 
@@ -574,6 +577,9 @@ static int intel_config_get_pull(struct intel_pinctrl *pctrl, unsigned int pin,
 		case PADCFG1_TERM_1K:
 			*arg = 1000;
 			break;
+		case PADCFG1_TERM_4K:
+			*arg = 4000;
+			break;
 		case PADCFG1_TERM_5K:
 			*arg = 5000;
 			break;
@@ -599,6 +605,9 @@ static int intel_config_get_pull(struct intel_pinctrl *pctrl, unsigned int pin,
 				return -EINVAL;
 			*arg = 1000;
 			break;
+		case PADCFG1_TERM_4K:
+			*arg = 4000;
+			break;
 		case PADCFG1_TERM_5K:
 			*arg = 5000;
 			break;
@@ -691,21 +700,17 @@ static int intel_config_set_pull(struct intel_pinctrl *pctrl, unsigned int pin,
 	raw_spin_lock_irqsave(&pctrl->lock, flags);
 
 	value = readl(padcfg1);
+	value &= ~(PADCFG1_TERM_MASK | PADCFG1_TERM_UP);
+
+	/* Set default strength value in case none is given */
+	if (arg == 1)
+		arg = 5000;
 
 	switch (param) {
 	case PIN_CONFIG_BIAS_DISABLE:
-		value &= ~(PADCFG1_TERM_MASK | PADCFG1_TERM_UP);
 		break;
 
 	case PIN_CONFIG_BIAS_PULL_UP:
-		value &= ~PADCFG1_TERM_MASK;
-
-		value |= PADCFG1_TERM_UP;
-
-		/* Set default strength value in case none is given */
-		if (arg == 1)
-			arg = 5000;
-
 		switch (arg) {
 		case 20000:
 			value |= PADCFG1_TERM_20K << PADCFG1_TERM_SHIFT;
@@ -713,6 +718,9 @@ static int intel_config_set_pull(struct intel_pinctrl *pctrl, unsigned int pin,
 		case 5000:
 			value |= PADCFG1_TERM_5K << PADCFG1_TERM_SHIFT;
 			break;
+		case 4000:
+			value |= PADCFG1_TERM_4K << PADCFG1_TERM_SHIFT;
+			break;
 		case 1000:
 			value |= PADCFG1_TERM_1K << PADCFG1_TERM_SHIFT;
 			break;
@@ -721,17 +729,13 @@ static int intel_config_set_pull(struct intel_pinctrl *pctrl, unsigned int pin,
 			break;
 		default:
 			ret = -EINVAL;
+			break;
 		}
 
+		value |= PADCFG1_TERM_UP;
 		break;
 
 	case PIN_CONFIG_BIAS_PULL_DOWN:
-		value &= ~(PADCFG1_TERM_UP | PADCFG1_TERM_MASK);
-
-		/* Set default strength value in case none is given */
-		if (arg == 1)
-			arg = 5000;
-
 		switch (arg) {
 		case 20000:
 			value |= PADCFG1_TERM_20K << PADCFG1_TERM_SHIFT;
@@ -739,6 +743,9 @@ static int intel_config_set_pull(struct intel_pinctrl *pctrl, unsigned int pin,
 		case 5000:
 			value |= PADCFG1_TERM_5K << PADCFG1_TERM_SHIFT;
 			break;
+		case 4000:
+			value |= PADCFG1_TERM_4K << PADCFG1_TERM_SHIFT;
+			break;
 		case 1000:
 			if (!(community->features & PINCTRL_FEATURE_1K_PD)) {
 				ret = -EINVAL;
@@ -755,9 +762,14 @@ static int intel_config_set_pull(struct intel_pinctrl *pctrl, unsigned int pin,
 			break;
 		default:
 			ret = -EINVAL;
+			break;
 		}
 
 		break;
+
+	default:
+		ret = -EINVAL;
+		break;
 	}
 
 	if (!ret)
@@ -1215,13 +1227,8 @@ static int intel_gpio_community_irq_handler(struct intel_pinctrl *pctrl,
 		/* Only interrupts that are enabled */
 		pending &= enabled;
 
-		for_each_set_bit(gpp_offset, &pending, padgrp->size) {
-			unsigned int irq;
-
-			irq = irq_find_mapping(gc->irq.domain,
-					       padgrp->gpio_base + gpp_offset);
-			generic_handle_irq(irq);
-		}
+		for_each_set_bit(gpp_offset, &pending, padgrp->size)
+			generic_handle_domain_irq(gc->irq.domain, padgrp->gpio_base + gpp_offset);
 
 		ret += pending ? 1 : 0;
 	}
@@ -1399,7 +1406,7 @@ static int intel_pinctrl_add_padgroups_by_gpps(struct intel_pinctrl *pctrl,
 	for (i = 0; i < ngpps; i++) {
 		gpps[i] = community->gpps[i];
 
-		if (gpps[i].size > 32)
+		if (gpps[i].size > INTEL_PINCTRL_MAX_GPP_SIZE)
 			return -EINVAL;
 
 		/* Special treatment for GPIO base */
@@ -1417,7 +1424,7 @@ static int intel_pinctrl_add_padgroups_by_gpps(struct intel_pinctrl *pctrl,
 		}
 
 		gpps[i].padown_num = padown_num;
-		padown_num += DIV_ROUND_UP(gpps[i].size * 4, 32);
+		padown_num += DIV_ROUND_UP(gpps[i].size * 4, INTEL_PINCTRL_MAX_GPP_SIZE);
 	}
 
 	community->gpps = gpps;
@@ -1433,7 +1440,7 @@ static int intel_pinctrl_add_padgroups_by_size(struct intel_pinctrl *pctrl,
 	unsigned int padown_num = 0;
 	size_t i, ngpps = DIV_ROUND_UP(npins, community->gpp_size);
 
-	if (community->gpp_size > 32)
+	if (community->gpp_size > INTEL_PINCTRL_MAX_GPP_SIZE)
 		return -EINVAL;
 
 	gpps = devm_kcalloc(pctrl->dev, ngpps, sizeof(*gpps), GFP_KERNEL);
@@ -1451,14 +1458,7 @@ static int intel_pinctrl_add_padgroups_by_size(struct intel_pinctrl *pctrl,
 		gpps[i].gpio_base = gpps[i].base;
 		gpps[i].padown_num = padown_num;
 
-		/*
-		 * In older hardware the number of padown registers per
-		 * group is fixed regardless of the group size.
-		 */
-		if (community->gpp_num_padown_regs)
-			padown_num += community->gpp_num_padown_regs;
-		else
-			padown_num += DIV_ROUND_UP(gpps[i].size * 4, 32);
+		padown_num += community->gpp_num_padown_regs;
 	}
 
 	community->ngpps = ngpps;
diff --git a/drivers/pinctrl/intel/pinctrl-intel.h b/drivers/pinctrl/intel/pinctrl-intel.h
index 65628423bf63..1faf2ada480a 100644
--- a/drivers/pinctrl/intel/pinctrl-intel.h
+++ b/drivers/pinctrl/intel/pinctrl-intel.h
@@ -36,21 +36,19 @@ struct intel_pingroup {
 
 /**
  * struct intel_function - Description about a function
- * @name: Name of the function
- * @groups: An array of groups for this function
- * @ngroups: Number of groups in @groups
+ * @func: Generic data of the pin function (name and groups of pins)
  */
 struct intel_function {
-	const char *name;
-	const char * const *groups;
-	size_t ngroups;
+	struct pinfunction func;
 };
 
+#define INTEL_PINCTRL_MAX_GPP_SIZE	32
+
 /**
  * struct intel_padgroup - Hardware pad group information
  * @reg_num: GPI_IS register number
  * @base: Starting pin of this group
- * @size: Size of this group (maximum is 32).
+ * @size: Size of this group (maximum is %INTEL_PINCTRL_MAX_GPP_SIZE).
  * @gpio_base: Starting GPIO base of this group
  * @padown_num: PAD_OWN register number (assigned by the core driver)
  *
@@ -96,8 +94,7 @@ enum {
  * @gpp_size: Maximum number of pads in each group, such as PADCFGLOCK,
  *            HOSTSW_OWN, GPI_IS, GPI_IE. Used when @gpps is %NULL.
  * @gpp_num_padown_regs: Number of pad registers each pad group consumes at
- *			 minimum. Use %0 if the number of registers can be
- *			 determined by the size of the group.
+ *			 minimum. Used when @gpps is %NULL.
  * @gpps: Pad groups if the controller has variable size pad groups
  * @ngpps: Number of pad groups in this community
  * @pad_map: Optional non-linear mapping of the pads
@@ -106,11 +103,13 @@ enum {
  * @regs: Community specific common registers (reserved for core driver)
  * @pad_regs: Community specific pad registers (reserved for core driver)
  *
- * In some of Intel GPIO host controllers this driver supports each pad group
+ * In older Intel GPIO host controllers, this driver supports, each pad group
  * is of equal size (except the last one). In that case the driver can just
- * fill in @gpp_size field and let the core driver to handle the rest. If
- * the controller has pad groups of variable size the client driver can
- * pass custom @gpps and @ngpps instead.
+ * fill in @gpp_size and @gpp_num_padown_regs fields and let the core driver
+ * to handle the rest.
+ *
+ * In newer Intel GPIO host controllers each pad group is of variable size,
+ * so the client driver can pass custom @gpps and @ngpps instead.
  */
 struct intel_community {
 	unsigned int barno;
@@ -143,6 +142,28 @@ struct intel_community {
 #define PINCTRL_FEATURE_BLINK		BIT(4)
 #define PINCTRL_FEATURE_EXP		BIT(5)
 
+#define __INTEL_COMMUNITY(b, s, e, g, n, gs, gn, soc)		\
+	{							\
+		.barno = (b),					\
+		.padown_offset = soc ## _PAD_OWN,		\
+		.padcfglock_offset = soc ## _PADCFGLOCK,	\
+		.hostown_offset = soc ## _HOSTSW_OWN,		\
+		.is_offset = soc ## _GPI_IS,			\
+		.ie_offset = soc ## _GPI_IE,			\
+		.gpp_size = (gs),				\
+		.gpp_num_padown_regs = (gn),			\
+		.pin_base = (s),				\
+		.npins = ((e) - (s) + 1),			\
+		.gpps = (g),					\
+		.ngpps = (n),					\
+	}
+
+#define INTEL_COMMUNITY_GPPS(b, s, e, g, soc)			\
+	__INTEL_COMMUNITY(b, s, e, g, ARRAY_SIZE(g), 0, 0, soc)
+
+#define INTEL_COMMUNITY_SIZE(b, s, e, gs, gn, soc)		\
+	__INTEL_COMMUNITY(b, s, e, NULL, 0, gs, gn, soc)
+
 /**
  * PIN_GROUP - Declare a pin group
  * @n: Name of the group
@@ -158,11 +179,9 @@ struct intel_community {
 		.modes = __builtin_choose_expr(__builtin_constant_p((m)), NULL, (m)),	\
 	}
 
-#define FUNCTION(n, g)				\
-	{					\
-		.name = (n),			\
-		.groups = (g),			\
-		.ngroups = ARRAY_SIZE((g)),	\
+#define FUNCTION(n, g)							\
+	{								\
+		.func = PINCTRL_PINFUNCTION((n), (g), ARRAY_SIZE(g)),	\
 	}
 
 /**
diff --git a/drivers/pinctrl/intel/pinctrl-jasperlake.c b/drivers/pinctrl/intel/pinctrl-jasperlake.c
index ec435b7ab392..086ab7fe08dd 100644
--- a/drivers/pinctrl/intel/pinctrl-jasperlake.c
+++ b/drivers/pinctrl/intel/pinctrl-jasperlake.c
@@ -29,18 +29,7 @@
 	}
 
 #define JSL_COMMUNITY(b, s, e, g)			\
-	{						\
-		.barno = (b),				\
-		.padown_offset = JSL_PAD_OWN,		\
-		.padcfglock_offset = JSL_PADCFGLOCK,	\
-		.hostown_offset = JSL_HOSTSW_OWN,	\
-		.is_offset = JSL_GPI_IS,		\
-		.ie_offset = JSL_GPI_IE,		\
-		.pin_base = (s),			\
-		.npins = ((e) - (s) + 1),		\
-		.gpps = (g),				\
-		.ngpps = ARRAY_SIZE(g),			\
-	}
+	INTEL_COMMUNITY_GPPS(b, s, e, g, JSL)
 
 /* Jasper Lake */
 static const struct pinctrl_pin_desc jsl_pins[] = {
diff --git a/drivers/pinctrl/intel/pinctrl-lakefield.c b/drivers/pinctrl/intel/pinctrl-lakefield.c
index 3c6283c4827f..8dac2d6012b1 100644
--- a/drivers/pinctrl/intel/pinctrl-lakefield.c
+++ b/drivers/pinctrl/intel/pinctrl-lakefield.c
@@ -29,18 +29,7 @@
 	}
 
 #define LKF_COMMUNITY(b, s, e, g)			\
-	{						\
-		.barno = (b),				\
-		.padown_offset = LKF_PAD_OWN,		\
-		.padcfglock_offset = LKF_PADCFGLOCK,	\
-		.hostown_offset = LKF_HOSTSW_OWN,	\
-		.is_offset = LKF_GPI_IS,		\
-		.ie_offset = LKF_GPI_IE,		\
-		.pin_base = (s),			\
-		.npins = ((e) - (s) + 1),		\
-		.gpps = (g),				\
-		.ngpps = ARRAY_SIZE(g),			\
-	}
+	INTEL_COMMUNITY_GPPS(b, s, e, g, LKF)
 
 /* Lakefield */
 static const struct pinctrl_pin_desc lkf_pins[] = {
diff --git a/drivers/pinctrl/intel/pinctrl-lewisburg.c b/drivers/pinctrl/intel/pinctrl-lewisburg.c
index ad4b446d588e..7aac1bbde2e9 100644
--- a/drivers/pinctrl/intel/pinctrl-lewisburg.c
+++ b/drivers/pinctrl/intel/pinctrl-lewisburg.c
@@ -21,17 +21,7 @@
 #define LBG_GPI_IE	0x110
 
 #define LBG_COMMUNITY(b, s, e)				\
-	{						\
-		.barno = (b),				\
-		.padown_offset = LBG_PAD_OWN,		\
-		.padcfglock_offset = LBG_PADCFGLOCK,	\
-		.hostown_offset = LBG_HOSTSW_OWN,	\
-		.is_offset = LBG_GPI_IS,		\
-		.ie_offset = LBG_GPI_IE,		\
-		.gpp_size = 24,				\
-		.pin_base = (s),			\
-		.npins = ((e) - (s) + 1),		\
-	}
+	INTEL_COMMUNITY_SIZE(b, s, e, 24, 3, LBG)
 
 /* Lewisburg */
 static const struct pinctrl_pin_desc lbg_pins[] = {
diff --git a/drivers/pinctrl/intel/pinctrl-lynxpoint.c b/drivers/pinctrl/intel/pinctrl-lynxpoint.c
index 8d05dad38556..cdace55aaeac 100644
--- a/drivers/pinctrl/intel/pinctrl-lynxpoint.c
+++ b/drivers/pinctrl/intel/pinctrl-lynxpoint.c
@@ -341,18 +341,18 @@ static const char *lp_get_function_name(struct pinctrl_dev *pctldev,
 {
 	struct intel_pinctrl *lg = pinctrl_dev_get_drvdata(pctldev);
 
-	return lg->soc->functions[selector].name;
+	return lg->soc->functions[selector].func.name;
 }
 
 static int lp_get_function_groups(struct pinctrl_dev *pctldev,
 				  unsigned int selector,
 				  const char * const **groups,
-				  unsigned int *num_groups)
+				  unsigned int *ngroups)
 {
 	struct intel_pinctrl *lg = pinctrl_dev_get_drvdata(pctldev);
 
-	*groups		= lg->soc->functions[selector].groups;
-	*num_groups	= lg->soc->functions[selector].ngroups;
+	*groups		= lg->soc->functions[selector].func.groups;
+	*ngroups	= lg->soc->functions[selector].func.ngroups;
 
 	return 0;
 }
diff --git a/drivers/pinctrl/intel/pinctrl-merrifield.c b/drivers/pinctrl/intel/pinctrl-merrifield.c
index c0845bb1e9e3..365c391c97a3 100644
--- a/drivers/pinctrl/intel/pinctrl-merrifield.c
+++ b/drivers/pinctrl/intel/pinctrl-merrifield.c
@@ -576,7 +576,7 @@ static const char *mrfld_get_function_name(struct pinctrl_dev *pctldev,
 {
 	struct mrfld_pinctrl *mp = pinctrl_dev_get_drvdata(pctldev);
 
-	return mp->functions[function].name;
+	return mp->functions[function].func.name;
 }
 
 static int mrfld_get_function_groups(struct pinctrl_dev *pctldev,
@@ -586,8 +586,8 @@ static int mrfld_get_function_groups(struct pinctrl_dev *pctldev,
 {
 	struct mrfld_pinctrl *mp = pinctrl_dev_get_drvdata(pctldev);
 
-	*groups = mp->functions[function].groups;
-	*ngroups = mp->functions[function].ngroups;
+	*groups = mp->functions[function].func.groups;
+	*ngroups = mp->functions[function].func.ngroups;
 	return 0;
 }
 
diff --git a/drivers/pinctrl/intel/pinctrl-meteorlake.c b/drivers/pinctrl/intel/pinctrl-meteorlake.c
index 9576dcd1cb29..a82f6754c45b 100644
--- a/drivers/pinctrl/intel/pinctrl-meteorlake.c
+++ b/drivers/pinctrl/intel/pinctrl-meteorlake.c
@@ -14,11 +14,11 @@
 
 #include "pinctrl-intel.h"
 
-#define MTL_PAD_OWN	0x0b0
-#define MTL_PADCFGLOCK	0x110
-#define MTL_HOSTSW_OWN	0x140
-#define MTL_GPI_IS	0x200
-#define MTL_GPI_IE	0x210
+#define MTL_P_PAD_OWN		0x0b0
+#define MTL_P_PADCFGLOCK	0x110
+#define MTL_P_HOSTSW_OWN	0x140
+#define MTL_P_GPI_IS		0x200
+#define MTL_P_GPI_IE		0x210
 
 #define MTL_GPP(r, s, e, g)				\
 	{						\
@@ -29,18 +29,7 @@
 	}
 
 #define MTL_COMMUNITY(b, s, e, g)			\
-	{						\
-		.barno = (b),				\
-		.padown_offset = MTL_PAD_OWN,		\
-		.padcfglock_offset = MTL_PADCFGLOCK,	\
-		.hostown_offset = MTL_HOSTSW_OWN,	\
-		.is_offset = MTL_GPI_IS,		\
-		.ie_offset = MTL_GPI_IE,		\
-		.pin_base = (s),			\
-		.npins = ((e) - (s) + 1),		\
-		.gpps = (g),				\
-		.ngpps = ARRAY_SIZE(g),			\
-	}
+	INTEL_COMMUNITY_GPPS(b, s, e, g, MTL_P)
 
 /* Meteor Lake-P */
 static const struct pinctrl_pin_desc mtlp_pins[] = {
diff --git a/drivers/pinctrl/intel/pinctrl-moorefield.c b/drivers/pinctrl/intel/pinctrl-moorefield.c
index e3eec671e15d..3c9a8484b442 100644
--- a/drivers/pinctrl/intel/pinctrl-moorefield.c
+++ b/drivers/pinctrl/intel/pinctrl-moorefield.c
@@ -530,7 +530,7 @@ static const char *mofld_get_function_name(struct pinctrl_dev *pctldev, unsigned
 {
 	struct mofld_pinctrl *mp = pinctrl_dev_get_drvdata(pctldev);
 
-	return mp->functions[function].name;
+	return mp->functions[function].func.name;
 }
 
 static int mofld_get_function_groups(struct pinctrl_dev *pctldev, unsigned int function,
@@ -538,8 +538,8 @@ static int mofld_get_function_groups(struct pinctrl_dev *pctldev, unsigned int f
 {
 	struct mofld_pinctrl *mp = pinctrl_dev_get_drvdata(pctldev);
 
-	*groups = mp->functions[function].groups;
-	*ngroups = mp->functions[function].ngroups;
+	*groups = mp->functions[function].func.groups;
+	*ngroups = mp->functions[function].func.ngroups;
 	return 0;
 }
 
diff --git a/drivers/pinctrl/intel/pinctrl-sunrisepoint.c b/drivers/pinctrl/intel/pinctrl-sunrisepoint.c
index 292b660067e9..f91e27feb7c3 100644
--- a/drivers/pinctrl/intel/pinctrl-sunrisepoint.c
+++ b/drivers/pinctrl/intel/pinctrl-sunrisepoint.c
@@ -15,31 +15,17 @@
 
 #include "pinctrl-intel.h"
 
-#define SPT_PAD_OWN		0x020
+#define SPT_H_PAD_OWN		0x020
 #define SPT_H_PADCFGLOCK	0x090
-#define SPT_LP_PADCFGLOCK	0x0a0
-#define SPT_HOSTSW_OWN		0x0d0
-#define SPT_GPI_IS		0x100
-#define SPT_GPI_IE		0x120
-
-#define SPT_COMMUNITY(b, s, e, g, n, v, gs, gn)			\
-	{							\
-		.barno = (b),					\
-		.padown_offset = SPT_PAD_OWN,			\
-		.padcfglock_offset = SPT_##v##_PADCFGLOCK,	\
-		.hostown_offset = SPT_HOSTSW_OWN,		\
-		.is_offset = SPT_GPI_IS,			\
-		.ie_offset = SPT_GPI_IE,			\
-		.gpp_size = (gs),				\
-		.gpp_num_padown_regs = (gn),			\
-		.pin_base = (s),				\
-		.npins = ((e) - (s) + 1),			\
-		.gpps = (g),					\
-		.ngpps = (n),					\
-	}
+#define SPT_H_HOSTSW_OWN	0x0d0
+#define SPT_H_GPI_IS		0x100
+#define SPT_H_GPI_IE		0x120
 
-#define SPT_LP_COMMUNITY(b, s, e)			\
-	SPT_COMMUNITY(b, s, e, NULL, 0, LP, 24, 4)
+#define SPT_LP_PAD_OWN		0x020
+#define SPT_LP_PADCFGLOCK	0x0a0
+#define SPT_LP_HOSTSW_OWN	0x0d0
+#define SPT_LP_GPI_IS		0x100
+#define SPT_LP_GPI_IE		0x120
 
 #define SPT_H_GPP(r, s, e, g)				\
 	{						\
@@ -50,7 +36,10 @@
 	}
 
 #define SPT_H_COMMUNITY(b, s, e, g)			\
-	SPT_COMMUNITY(b, s, e, g, ARRAY_SIZE(g), H, 0, 0)
+	INTEL_COMMUNITY_GPPS(b, s, e, g, SPT_H)
+
+#define SPT_LP_COMMUNITY(b, s, e)			\
+	INTEL_COMMUNITY_SIZE(b, s, e, 24, 4, SPT_LP)
 
 /* Sunrisepoint-LP */
 static const struct pinctrl_pin_desc sptlp_pins[] = {
diff --git a/drivers/pinctrl/intel/pinctrl-tigerlake.c b/drivers/pinctrl/intel/pinctrl-tigerlake.c
index 431352fa2ab5..6e3a651d1241 100644
--- a/drivers/pinctrl/intel/pinctrl-tigerlake.c
+++ b/drivers/pinctrl/intel/pinctrl-tigerlake.c
@@ -15,13 +15,17 @@
 
 #include "pinctrl-intel.h"
 
-#define TGL_PAD_OWN		0x020
+#define TGL_LP_PAD_OWN		0x020
 #define TGL_LP_PADCFGLOCK	0x080
-#define TGL_H_PADCFGLOCK	0x090
 #define TGL_LP_HOSTSW_OWN	0x0b0
+#define TGL_LP_GPI_IS		0x100
+#define TGL_LP_GPI_IE		0x120
+
+#define TGL_H_PAD_OWN		0x020
+#define TGL_H_PADCFGLOCK	0x090
 #define TGL_H_HOSTSW_OWN	0x0c0
-#define TGL_GPI_IS		0x100
-#define TGL_GPI_IE		0x120
+#define TGL_H_GPI_IS		0x100
+#define TGL_H_GPI_IE		0x120
 
 #define TGL_GPP(r, s, e, g)				\
 	{						\
@@ -31,25 +35,11 @@
 		.gpio_base = (g),			\
 	}
 
-#define TGL_COMMUNITY(b, s, e, g, v)				\
-	{							\
-		.barno = (b),					\
-		.padown_offset = TGL_PAD_OWN,			\
-		.padcfglock_offset = TGL_##v##_PADCFGLOCK,	\
-		.hostown_offset = TGL_##v##_HOSTSW_OWN,		\
-		.is_offset = TGL_GPI_IS,			\
-		.ie_offset = TGL_GPI_IE,			\
-		.pin_base = (s),				\
-		.npins = ((e) - (s) + 1),			\
-		.gpps = (g),					\
-		.ngpps = ARRAY_SIZE(g),				\
-	}
-
 #define TGL_LP_COMMUNITY(b, s, e, g)			\
-	TGL_COMMUNITY(b, s, e, g, LP)
+	INTEL_COMMUNITY_GPPS(b, s, e, g, TGL_LP)
 
 #define TGL_H_COMMUNITY(b, s, e, g)			\
-	TGL_COMMUNITY(b, s, e, g, H)
+	INTEL_COMMUNITY_GPPS(b, s, e, g, TGL_H)
 
 /* Tiger Lake-LP */
 static const struct pinctrl_pin_desc tgllp_pins[] = {
diff --git a/include/linux/pinctrl/pinctrl.h b/include/linux/pinctrl/pinctrl.h
index a0d39b303431..4d252ea00ed1 100644
--- a/include/linux/pinctrl/pinctrl.h
+++ b/include/linux/pinctrl/pinctrl.h
@@ -206,6 +206,26 @@ extern int pinctrl_get_group_pins(struct pinctrl_dev *pctldev,
 				const char *pin_group, const unsigned **pins,
 				unsigned *num_pins);
 
+/**
+ * struct pinfunction - Description about a function
+ * @name: Name of the function
+ * @groups: An array of groups for this function
+ * @ngroups: Number of groups in @groups
+ */
+struct pinfunction {
+	const char *name;
+	const char * const *groups;
+	size_t ngroups;
+};
+
+/* Convenience macro to define a single named pinfunction */
+#define PINCTRL_PINFUNCTION(_name, _groups, _ngroups)	\
+(struct pinfunction) {					\
+		.name = (_name),			\
+		.groups = (_groups),			\
+		.ngroups = (_ngroups),			\
+	}
+
 #if IS_ENABLED(CONFIG_OF) && IS_ENABLED(CONFIG_PINCTRL)
 extern struct pinctrl_dev *of_pinctrl_get(struct device_node *np);
 #else